Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * ntc_thermistor.c - NTC Thermistors
4 *
5 * Copyright (C) 2010 Samsung Electronics
6 * MyungJoo Ham <myungjoo.ham@samsung.com>
7 */
8
9#include <linux/slab.h>
10#include <linux/module.h>
11#include <linux/pm_runtime.h>
12#include <linux/math64.h>
13#include <linux/platform_device.h>
14#include <linux/err.h>
15#include <linux/of.h>
16#include <linux/of_device.h>
17
18#include <linux/platform_data/ntc_thermistor.h>
19
20#include <linux/iio/iio.h>
21#include <linux/iio/machine.h>
22#include <linux/iio/driver.h>
23#include <linux/iio/consumer.h>
24
25#include <linux/hwmon.h>
26
27struct ntc_compensation {
28 int temp_c;
29 unsigned int ohm;
30};
31
32/*
33 * Used as index in a zero-terminated array, holes not allowed so
34 * that NTC_LAST is the first empty array entry.
35 */
36enum {
37 NTC_B57330V2103,
38 NTC_B57891S0103,
39 NTC_NCP03WB473,
40 NTC_NCP03WF104,
41 NTC_NCP15WB473,
42 NTC_NCP15WL333,
43 NTC_NCP15XH103,
44 NTC_NCP18WB473,
45 NTC_NCP21WB473,
46 NTC_LAST,
47};
48
49static const struct platform_device_id ntc_thermistor_id[] = {
50 [NTC_B57330V2103] = { "b57330v2103", TYPE_B57330V2103 },
51 [NTC_B57891S0103] = { "b57891s0103", TYPE_B57891S0103 },
52 [NTC_NCP03WB473] = { "ncp03wb473", TYPE_NCPXXWB473 },
53 [NTC_NCP03WF104] = { "ncp03wf104", TYPE_NCPXXWF104 },
54 [NTC_NCP15WB473] = { "ncp15wb473", TYPE_NCPXXWB473 },
55 [NTC_NCP15WL333] = { "ncp15wl333", TYPE_NCPXXWL333 },
56 [NTC_NCP15XH103] = { "ncp15xh103", TYPE_NCPXXXH103 },
57 [NTC_NCP18WB473] = { "ncp18wb473", TYPE_NCPXXWB473 },
58 [NTC_NCP21WB473] = { "ncp21wb473", TYPE_NCPXXWB473 },
59 [NTC_LAST] = { },
60};
61
62/*
63 * A compensation table should be sorted by the values of .ohm
64 * in descending order.
65 * The following compensation tables are from the specification of Murata NTC
66 * Thermistors Datasheet
67 */
68static const struct ntc_compensation ncpXXwb473[] = {
69 { .temp_c = -40, .ohm = 1747920 },
70 { .temp_c = -35, .ohm = 1245428 },
71 { .temp_c = -30, .ohm = 898485 },
72 { .temp_c = -25, .ohm = 655802 },
73 { .temp_c = -20, .ohm = 483954 },
74 { .temp_c = -15, .ohm = 360850 },
75 { .temp_c = -10, .ohm = 271697 },
76 { .temp_c = -5, .ohm = 206463 },
77 { .temp_c = 0, .ohm = 158214 },
78 { .temp_c = 5, .ohm = 122259 },
79 { .temp_c = 10, .ohm = 95227 },
80 { .temp_c = 15, .ohm = 74730 },
81 { .temp_c = 20, .ohm = 59065 },
82 { .temp_c = 25, .ohm = 47000 },
83 { .temp_c = 30, .ohm = 37643 },
84 { .temp_c = 35, .ohm = 30334 },
85 { .temp_c = 40, .ohm = 24591 },
86 { .temp_c = 45, .ohm = 20048 },
87 { .temp_c = 50, .ohm = 16433 },
88 { .temp_c = 55, .ohm = 13539 },
89 { .temp_c = 60, .ohm = 11209 },
90 { .temp_c = 65, .ohm = 9328 },
91 { .temp_c = 70, .ohm = 7798 },
92 { .temp_c = 75, .ohm = 6544 },
93 { .temp_c = 80, .ohm = 5518 },
94 { .temp_c = 85, .ohm = 4674 },
95 { .temp_c = 90, .ohm = 3972 },
96 { .temp_c = 95, .ohm = 3388 },
97 { .temp_c = 100, .ohm = 2902 },
98 { .temp_c = 105, .ohm = 2494 },
99 { .temp_c = 110, .ohm = 2150 },
100 { .temp_c = 115, .ohm = 1860 },
101 { .temp_c = 120, .ohm = 1615 },
102 { .temp_c = 125, .ohm = 1406 },
103};
104static const struct ntc_compensation ncpXXwl333[] = {
105 { .temp_c = -40, .ohm = 1610154 },
106 { .temp_c = -35, .ohm = 1130850 },
107 { .temp_c = -30, .ohm = 802609 },
108 { .temp_c = -25, .ohm = 575385 },
109 { .temp_c = -20, .ohm = 416464 },
110 { .temp_c = -15, .ohm = 304219 },
111 { .temp_c = -10, .ohm = 224193 },
112 { .temp_c = -5, .ohm = 166623 },
113 { .temp_c = 0, .ohm = 124850 },
114 { .temp_c = 5, .ohm = 94287 },
115 { .temp_c = 10, .ohm = 71747 },
116 { .temp_c = 15, .ohm = 54996 },
117 { .temp_c = 20, .ohm = 42455 },
118 { .temp_c = 25, .ohm = 33000 },
119 { .temp_c = 30, .ohm = 25822 },
120 { .temp_c = 35, .ohm = 20335 },
121 { .temp_c = 40, .ohm = 16115 },
122 { .temp_c = 45, .ohm = 12849 },
123 { .temp_c = 50, .ohm = 10306 },
124 { .temp_c = 55, .ohm = 8314 },
125 { .temp_c = 60, .ohm = 6746 },
126 { .temp_c = 65, .ohm = 5503 },
127 { .temp_c = 70, .ohm = 4513 },
128 { .temp_c = 75, .ohm = 3721 },
129 { .temp_c = 80, .ohm = 3084 },
130 { .temp_c = 85, .ohm = 2569 },
131 { .temp_c = 90, .ohm = 2151 },
132 { .temp_c = 95, .ohm = 1809 },
133 { .temp_c = 100, .ohm = 1529 },
134 { .temp_c = 105, .ohm = 1299 },
135 { .temp_c = 110, .ohm = 1108 },
136 { .temp_c = 115, .ohm = 949 },
137 { .temp_c = 120, .ohm = 817 },
138 { .temp_c = 125, .ohm = 707 },
139};
140
141static const struct ntc_compensation ncpXXwf104[] = {
142 { .temp_c = -40, .ohm = 4397119 },
143 { .temp_c = -35, .ohm = 3088599 },
144 { .temp_c = -30, .ohm = 2197225 },
145 { .temp_c = -25, .ohm = 1581881 },
146 { .temp_c = -20, .ohm = 1151037 },
147 { .temp_c = -15, .ohm = 846579 },
148 { .temp_c = -10, .ohm = 628988 },
149 { .temp_c = -5, .ohm = 471632 },
150 { .temp_c = 0, .ohm = 357012 },
151 { .temp_c = 5, .ohm = 272500 },
152 { .temp_c = 10, .ohm = 209710 },
153 { .temp_c = 15, .ohm = 162651 },
154 { .temp_c = 20, .ohm = 127080 },
155 { .temp_c = 25, .ohm = 100000 },
156 { .temp_c = 30, .ohm = 79222 },
157 { .temp_c = 35, .ohm = 63167 },
158 { .temp_c = 40, .ohm = 50677 },
159 { .temp_c = 45, .ohm = 40904 },
160 { .temp_c = 50, .ohm = 33195 },
161 { .temp_c = 55, .ohm = 27091 },
162 { .temp_c = 60, .ohm = 22224 },
163 { .temp_c = 65, .ohm = 18323 },
164 { .temp_c = 70, .ohm = 15184 },
165 { .temp_c = 75, .ohm = 12635 },
166 { .temp_c = 80, .ohm = 10566 },
167 { .temp_c = 85, .ohm = 8873 },
168 { .temp_c = 90, .ohm = 7481 },
169 { .temp_c = 95, .ohm = 6337 },
170 { .temp_c = 100, .ohm = 5384 },
171 { .temp_c = 105, .ohm = 4594 },
172 { .temp_c = 110, .ohm = 3934 },
173 { .temp_c = 115, .ohm = 3380 },
174 { .temp_c = 120, .ohm = 2916 },
175 { .temp_c = 125, .ohm = 2522 },
176};
177
178static const struct ntc_compensation ncpXXxh103[] = {
179 { .temp_c = -40, .ohm = 247565 },
180 { .temp_c = -35, .ohm = 181742 },
181 { .temp_c = -30, .ohm = 135128 },
182 { .temp_c = -25, .ohm = 101678 },
183 { .temp_c = -20, .ohm = 77373 },
184 { .temp_c = -15, .ohm = 59504 },
185 { .temp_c = -10, .ohm = 46222 },
186 { .temp_c = -5, .ohm = 36244 },
187 { .temp_c = 0, .ohm = 28674 },
188 { .temp_c = 5, .ohm = 22878 },
189 { .temp_c = 10, .ohm = 18399 },
190 { .temp_c = 15, .ohm = 14910 },
191 { .temp_c = 20, .ohm = 12169 },
192 { .temp_c = 25, .ohm = 10000 },
193 { .temp_c = 30, .ohm = 8271 },
194 { .temp_c = 35, .ohm = 6883 },
195 { .temp_c = 40, .ohm = 5762 },
196 { .temp_c = 45, .ohm = 4851 },
197 { .temp_c = 50, .ohm = 4105 },
198 { .temp_c = 55, .ohm = 3492 },
199 { .temp_c = 60, .ohm = 2985 },
200 { .temp_c = 65, .ohm = 2563 },
201 { .temp_c = 70, .ohm = 2211 },
202 { .temp_c = 75, .ohm = 1915 },
203 { .temp_c = 80, .ohm = 1666 },
204 { .temp_c = 85, .ohm = 1454 },
205 { .temp_c = 90, .ohm = 1275 },
206 { .temp_c = 95, .ohm = 1121 },
207 { .temp_c = 100, .ohm = 990 },
208 { .temp_c = 105, .ohm = 876 },
209 { .temp_c = 110, .ohm = 779 },
210 { .temp_c = 115, .ohm = 694 },
211 { .temp_c = 120, .ohm = 620 },
212 { .temp_c = 125, .ohm = 556 },
213};
214
215/*
216 * The following compensation tables are from the specifications in EPCOS NTC
217 * Thermistors Datasheets
218 */
219static const struct ntc_compensation b57330v2103[] = {
220 { .temp_c = -40, .ohm = 190030 },
221 { .temp_c = -35, .ohm = 145360 },
222 { .temp_c = -30, .ohm = 112060 },
223 { .temp_c = -25, .ohm = 87041 },
224 { .temp_c = -20, .ohm = 68104 },
225 { .temp_c = -15, .ohm = 53665 },
226 { .temp_c = -10, .ohm = 42576 },
227 { .temp_c = -5, .ohm = 34001 },
228 { .temp_c = 0, .ohm = 27326 },
229 { .temp_c = 5, .ohm = 22096 },
230 { .temp_c = 10, .ohm = 17973 },
231 { .temp_c = 15, .ohm = 14703 },
232 { .temp_c = 20, .ohm = 12090 },
233 { .temp_c = 25, .ohm = 10000 },
234 { .temp_c = 30, .ohm = 8311 },
235 { .temp_c = 35, .ohm = 6941 },
236 { .temp_c = 40, .ohm = 5825 },
237 { .temp_c = 45, .ohm = 4911 },
238 { .temp_c = 50, .ohm = 4158 },
239 { .temp_c = 55, .ohm = 3536 },
240 { .temp_c = 60, .ohm = 3019 },
241 { .temp_c = 65, .ohm = 2588 },
242 { .temp_c = 70, .ohm = 2227 },
243 { .temp_c = 75, .ohm = 1924 },
244 { .temp_c = 80, .ohm = 1668 },
245 { .temp_c = 85, .ohm = 1451 },
246 { .temp_c = 90, .ohm = 1266 },
247 { .temp_c = 95, .ohm = 1108 },
248 { .temp_c = 100, .ohm = 973 },
249 { .temp_c = 105, .ohm = 857 },
250 { .temp_c = 110, .ohm = 757 },
251 { .temp_c = 115, .ohm = 671 },
252 { .temp_c = 120, .ohm = 596 },
253 { .temp_c = 125, .ohm = 531 },
254};
255
256static const struct ntc_compensation b57891s0103[] = {
257 { .temp_c = -55.0, .ohm = 878900 },
258 { .temp_c = -50.0, .ohm = 617590 },
259 { .temp_c = -45.0, .ohm = 439340 },
260 { .temp_c = -40.0, .ohm = 316180 },
261 { .temp_c = -35.0, .ohm = 230060 },
262 { .temp_c = -30.0, .ohm = 169150 },
263 { .temp_c = -25.0, .ohm = 125550 },
264 { .temp_c = -20.0, .ohm = 94143 },
265 { .temp_c = -15.0, .ohm = 71172 },
266 { .temp_c = -10.0, .ohm = 54308 },
267 { .temp_c = -5.0, .ohm = 41505 },
268 { .temp_c = 0.0, .ohm = 32014 },
269 { .temp_c = 5.0, .ohm = 25011 },
270 { .temp_c = 10.0, .ohm = 19691 },
271 { .temp_c = 15.0, .ohm = 15618 },
272 { .temp_c = 20.0, .ohm = 12474 },
273 { .temp_c = 25.0, .ohm = 10000 },
274 { .temp_c = 30.0, .ohm = 8080 },
275 { .temp_c = 35.0, .ohm = 6569 },
276 { .temp_c = 40.0, .ohm = 5372 },
277 { .temp_c = 45.0, .ohm = 4424 },
278 { .temp_c = 50.0, .ohm = 3661 },
279 { .temp_c = 55.0, .ohm = 3039 },
280 { .temp_c = 60.0, .ohm = 2536 },
281 { .temp_c = 65.0, .ohm = 2128 },
282 { .temp_c = 70.0, .ohm = 1794 },
283 { .temp_c = 75.0, .ohm = 1518 },
284 { .temp_c = 80.0, .ohm = 1290 },
285 { .temp_c = 85.0, .ohm = 1100 },
286 { .temp_c = 90.0, .ohm = 942 },
287 { .temp_c = 95.0, .ohm = 809 },
288 { .temp_c = 100.0, .ohm = 697 },
289 { .temp_c = 105.0, .ohm = 604 },
290 { .temp_c = 110.0, .ohm = 525 },
291 { .temp_c = 115.0, .ohm = 457 },
292 { .temp_c = 120.0, .ohm = 400 },
293 { .temp_c = 125.0, .ohm = 351 },
294 { .temp_c = 130.0, .ohm = 308 },
295 { .temp_c = 135.0, .ohm = 272 },
296 { .temp_c = 140.0, .ohm = 240 },
297 { .temp_c = 145.0, .ohm = 213 },
298 { .temp_c = 150.0, .ohm = 189 },
299 { .temp_c = 155.0, .ohm = 168 },
300};
301
302struct ntc_type {
303 const struct ntc_compensation *comp;
304 int n_comp;
305};
306
307#define NTC_TYPE(ntc, compensation) \
308[(ntc)] = { .comp = (compensation), .n_comp = ARRAY_SIZE(compensation) }
309
310static const struct ntc_type ntc_type[] = {
311 NTC_TYPE(TYPE_B57330V2103, b57330v2103),
312 NTC_TYPE(TYPE_B57891S0103, b57891s0103),
313 NTC_TYPE(TYPE_NCPXXWB473, ncpXXwb473),
314 NTC_TYPE(TYPE_NCPXXWF104, ncpXXwf104),
315 NTC_TYPE(TYPE_NCPXXWL333, ncpXXwl333),
316 NTC_TYPE(TYPE_NCPXXXH103, ncpXXxh103),
317};
318
319struct ntc_data {
320 struct ntc_thermistor_platform_data *pdata;
321 const struct ntc_compensation *comp;
322 int n_comp;
323};
324
325#if defined(CONFIG_OF) && IS_ENABLED(CONFIG_IIO)
326static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata)
327{
328 struct iio_channel *channel = pdata->chan;
329 int raw, uv, ret;
330
331 ret = iio_read_channel_raw(channel, &raw);
332 if (ret < 0) {
333 pr_err("read channel() error: %d\n", ret);
334 return ret;
335 }
336
337 ret = iio_convert_raw_to_processed(channel, raw, &uv, 1000);
338 if (ret < 0) {
339 /* Assume 12 bit ADC with vref at pullup_uv */
340 uv = (pdata->pullup_uv * (s64)raw) >> 12;
341 }
342
343 return uv;
344}
345
346static const struct of_device_id ntc_match[] = {
347 { .compatible = "epcos,b57330v2103",
348 .data = &ntc_thermistor_id[NTC_B57330V2103]},
349 { .compatible = "epcos,b57891s0103",
350 .data = &ntc_thermistor_id[NTC_B57891S0103] },
351 { .compatible = "murata,ncp03wb473",
352 .data = &ntc_thermistor_id[NTC_NCP03WB473] },
353 { .compatible = "murata,ncp03wf104",
354 .data = &ntc_thermistor_id[NTC_NCP03WF104] },
355 { .compatible = "murata,ncp15wb473",
356 .data = &ntc_thermistor_id[NTC_NCP15WB473] },
357 { .compatible = "murata,ncp15wl333",
358 .data = &ntc_thermistor_id[NTC_NCP15WL333] },
359 { .compatible = "murata,ncp15xh103",
360 .data = &ntc_thermistor_id[NTC_NCP15XH103] },
361 { .compatible = "murata,ncp18wb473",
362 .data = &ntc_thermistor_id[NTC_NCP18WB473] },
363 { .compatible = "murata,ncp21wb473",
364 .data = &ntc_thermistor_id[NTC_NCP21WB473] },
365
366 /* Usage of vendor name "ntc" is deprecated */
367 { .compatible = "ntc,ncp03wb473",
368 .data = &ntc_thermistor_id[NTC_NCP03WB473] },
369 { .compatible = "ntc,ncp15wb473",
370 .data = &ntc_thermistor_id[NTC_NCP15WB473] },
371 { .compatible = "ntc,ncp15wl333",
372 .data = &ntc_thermistor_id[NTC_NCP15WL333] },
373 { .compatible = "ntc,ncp18wb473",
374 .data = &ntc_thermistor_id[NTC_NCP18WB473] },
375 { .compatible = "ntc,ncp21wb473",
376 .data = &ntc_thermistor_id[NTC_NCP21WB473] },
377 { },
378};
379MODULE_DEVICE_TABLE(of, ntc_match);
380
381static struct ntc_thermistor_platform_data *
382ntc_thermistor_parse_dt(struct device *dev)
383{
384 struct iio_channel *chan;
385 enum iio_chan_type type;
386 struct device_node *np = dev->of_node;
387 struct ntc_thermistor_platform_data *pdata;
388 int ret;
389
390 if (!np)
391 return NULL;
392
393 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
394 if (!pdata)
395 return ERR_PTR(-ENOMEM);
396
397 chan = devm_iio_channel_get(dev, NULL);
398 if (IS_ERR(chan))
399 return ERR_CAST(chan);
400
401 ret = iio_get_channel_type(chan, &type);
402 if (ret < 0)
403 return ERR_PTR(ret);
404
405 if (type != IIO_VOLTAGE)
406 return ERR_PTR(-EINVAL);
407
408 if (of_property_read_u32(np, "pullup-uv", &pdata->pullup_uv))
409 return ERR_PTR(-ENODEV);
410 if (of_property_read_u32(np, "pullup-ohm", &pdata->pullup_ohm))
411 return ERR_PTR(-ENODEV);
412 if (of_property_read_u32(np, "pulldown-ohm", &pdata->pulldown_ohm))
413 return ERR_PTR(-ENODEV);
414
415 if (of_find_property(np, "connected-positive", NULL))
416 pdata->connect = NTC_CONNECTED_POSITIVE;
417 else /* status change should be possible if not always on. */
418 pdata->connect = NTC_CONNECTED_GROUND;
419
420 pdata->chan = chan;
421 pdata->read_uv = ntc_adc_iio_read;
422
423 return pdata;
424}
425#else
426static struct ntc_thermistor_platform_data *
427ntc_thermistor_parse_dt(struct device *dev)
428{
429 return NULL;
430}
431
432#define ntc_match NULL
433
434#endif
435
436static inline u64 div64_u64_safe(u64 dividend, u64 divisor)
437{
438 if (divisor == 0 && dividend == 0)
439 return 0;
440 if (divisor == 0)
441 return UINT_MAX;
442 return div64_u64(dividend, divisor);
443}
444
445static int get_ohm_of_thermistor(struct ntc_data *data, unsigned int uv)
446{
447 struct ntc_thermistor_platform_data *pdata = data->pdata;
448 u32 puv = pdata->pullup_uv;
449 u64 n, puo, pdo;
450 puo = pdata->pullup_ohm;
451 pdo = pdata->pulldown_ohm;
452
453 if (uv == 0)
454 return (pdata->connect == NTC_CONNECTED_POSITIVE) ?
455 INT_MAX : 0;
456 if (uv >= puv)
457 return (pdata->connect == NTC_CONNECTED_POSITIVE) ?
458 0 : INT_MAX;
459
460 if (pdata->connect == NTC_CONNECTED_POSITIVE && puo == 0)
461 n = div_u64(pdo * (puv - uv), uv);
462 else if (pdata->connect == NTC_CONNECTED_GROUND && pdo == 0)
463 n = div_u64(puo * uv, puv - uv);
464 else if (pdata->connect == NTC_CONNECTED_POSITIVE)
465 n = div64_u64_safe(pdo * puo * (puv - uv),
466 puo * uv - pdo * (puv - uv));
467 else
468 n = div64_u64_safe(pdo * puo * uv, pdo * (puv - uv) - puo * uv);
469
470 if (n > INT_MAX)
471 n = INT_MAX;
472 return n;
473}
474
475static void lookup_comp(struct ntc_data *data, unsigned int ohm,
476 int *i_low, int *i_high)
477{
478 int start, end, mid;
479
480 /*
481 * Handle special cases: Resistance is higher than or equal to
482 * resistance in first table entry, or resistance is lower or equal
483 * to resistance in last table entry.
484 * In these cases, return i_low == i_high, either pointing to the
485 * beginning or to the end of the table depending on the condition.
486 */
487 if (ohm >= data->comp[0].ohm) {
488 *i_low = 0;
489 *i_high = 0;
490 return;
491 }
492 if (ohm <= data->comp[data->n_comp - 1].ohm) {
493 *i_low = data->n_comp - 1;
494 *i_high = data->n_comp - 1;
495 return;
496 }
497
498 /* Do a binary search on compensation table */
499 start = 0;
500 end = data->n_comp;
501 while (start < end) {
502 mid = start + (end - start) / 2;
503 /*
504 * start <= mid < end
505 * data->comp[start].ohm > ohm >= data->comp[end].ohm
506 *
507 * We could check for "ohm == data->comp[mid].ohm" here, but
508 * that is a quite unlikely condition, and we would have to
509 * check again after updating start. Check it at the end instead
510 * for simplicity.
511 */
512 if (ohm >= data->comp[mid].ohm) {
513 end = mid;
514 } else {
515 start = mid + 1;
516 /*
517 * ohm >= data->comp[start].ohm might be true here,
518 * since we set start to mid + 1. In that case, we are
519 * done. We could keep going, but the condition is quite
520 * likely to occur, so it is worth checking for it.
521 */
522 if (ohm >= data->comp[start].ohm)
523 end = start;
524 }
525 /*
526 * start <= end
527 * data->comp[start].ohm >= ohm >= data->comp[end].ohm
528 */
529 }
530 /*
531 * start == end
532 * ohm >= data->comp[end].ohm
533 */
534 *i_low = end;
535 if (ohm == data->comp[end].ohm)
536 *i_high = end;
537 else
538 *i_high = end - 1;
539}
540
541static int get_temp_mc(struct ntc_data *data, unsigned int ohm)
542{
543 int low, high;
544 int temp;
545
546 lookup_comp(data, ohm, &low, &high);
547 if (low == high) {
548 /* Unable to use linear approximation */
549 temp = data->comp[low].temp_c * 1000;
550 } else {
551 temp = data->comp[low].temp_c * 1000 +
552 ((data->comp[high].temp_c - data->comp[low].temp_c) *
553 1000 * ((int)ohm - (int)data->comp[low].ohm)) /
554 ((int)data->comp[high].ohm - (int)data->comp[low].ohm);
555 }
556 return temp;
557}
558
559static int ntc_thermistor_get_ohm(struct ntc_data *data)
560{
561 int read_uv;
562
563 if (data->pdata->read_ohm)
564 return data->pdata->read_ohm();
565
566 if (data->pdata->read_uv) {
567 read_uv = data->pdata->read_uv(data->pdata);
568 if (read_uv < 0)
569 return read_uv;
570 return get_ohm_of_thermistor(data, read_uv);
571 }
572 return -EINVAL;
573}
574
575static int ntc_read(struct device *dev, enum hwmon_sensor_types type,
576 u32 attr, int channel, long *val)
577{
578 struct ntc_data *data = dev_get_drvdata(dev);
579 int ohm;
580
581 switch (type) {
582 case hwmon_temp:
583 switch (attr) {
584 case hwmon_temp_input:
585 ohm = ntc_thermistor_get_ohm(data);
586 if (ohm < 0)
587 return ohm;
588 *val = get_temp_mc(data, ohm);
589 return 0;
590 case hwmon_temp_type:
591 *val = 4;
592 return 0;
593 default:
594 break;
595 }
596 break;
597 default:
598 break;
599 }
600 return -EINVAL;
601}
602
603static umode_t ntc_is_visible(const void *data, enum hwmon_sensor_types type,
604 u32 attr, int channel)
605{
606 if (type == hwmon_temp) {
607 switch (attr) {
608 case hwmon_temp_input:
609 case hwmon_temp_type:
610 return 0444;
611 default:
612 break;
613 }
614 }
615 return 0;
616}
617
618static const struct hwmon_channel_info *ntc_info[] = {
619 HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
620 HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_TYPE),
621 NULL
622};
623
624static const struct hwmon_ops ntc_hwmon_ops = {
625 .is_visible = ntc_is_visible,
626 .read = ntc_read,
627};
628
629static const struct hwmon_chip_info ntc_chip_info = {
630 .ops = &ntc_hwmon_ops,
631 .info = ntc_info,
632};
633
634static int ntc_thermistor_probe(struct platform_device *pdev)
635{
636 struct device *dev = &pdev->dev;
637 const struct of_device_id *of_id =
638 of_match_device(of_match_ptr(ntc_match), dev);
639 const struct platform_device_id *pdev_id;
640 struct ntc_thermistor_platform_data *pdata;
641 struct device *hwmon_dev;
642 struct ntc_data *data;
643
644 pdata = ntc_thermistor_parse_dt(dev);
645 if (IS_ERR(pdata))
646 return PTR_ERR(pdata);
647 else if (pdata == NULL)
648 pdata = dev_get_platdata(dev);
649
650 if (!pdata) {
651 dev_err(dev, "No platform init data supplied.\n");
652 return -ENODEV;
653 }
654
655 /* Either one of the two is required. */
656 if (!pdata->read_uv && !pdata->read_ohm) {
657 dev_err(dev,
658 "Both read_uv and read_ohm missing. Need either one of the two.\n");
659 return -EINVAL;
660 }
661
662 if (pdata->read_uv && pdata->read_ohm) {
663 dev_warn(dev,
664 "Only one of read_uv and read_ohm is needed; ignoring read_uv.\n");
665 pdata->read_uv = NULL;
666 }
667
668 if (pdata->read_uv && (pdata->pullup_uv == 0 ||
669 (pdata->pullup_ohm == 0 && pdata->connect ==
670 NTC_CONNECTED_GROUND) ||
671 (pdata->pulldown_ohm == 0 && pdata->connect ==
672 NTC_CONNECTED_POSITIVE) ||
673 (pdata->connect != NTC_CONNECTED_POSITIVE &&
674 pdata->connect != NTC_CONNECTED_GROUND))) {
675 dev_err(dev, "Required data to use read_uv not supplied.\n");
676 return -EINVAL;
677 }
678
679 data = devm_kzalloc(dev, sizeof(struct ntc_data), GFP_KERNEL);
680 if (!data)
681 return -ENOMEM;
682
683 pdev_id = of_id ? of_id->data : platform_get_device_id(pdev);
684
685 data->pdata = pdata;
686
687 if (pdev_id->driver_data >= ARRAY_SIZE(ntc_type)) {
688 dev_err(dev, "Unknown device type: %lu(%s)\n",
689 pdev_id->driver_data, pdev_id->name);
690 return -EINVAL;
691 }
692
693 data->comp = ntc_type[pdev_id->driver_data].comp;
694 data->n_comp = ntc_type[pdev_id->driver_data].n_comp;
695
696 hwmon_dev = devm_hwmon_device_register_with_info(dev, pdev_id->name,
697 data, &ntc_chip_info,
698 NULL);
699 if (IS_ERR(hwmon_dev)) {
700 dev_err(dev, "unable to register as hwmon device.\n");
701 return PTR_ERR(hwmon_dev);
702 }
703
704 dev_info(dev, "Thermistor type: %s successfully probed.\n",
705 pdev_id->name);
706
707 return 0;
708}
709
710static struct platform_driver ntc_thermistor_driver = {
711 .driver = {
712 .name = "ntc-thermistor",
713 .of_match_table = of_match_ptr(ntc_match),
714 },
715 .probe = ntc_thermistor_probe,
716 .id_table = ntc_thermistor_id,
717};
718
719module_platform_driver(ntc_thermistor_driver);
720
721MODULE_DESCRIPTION("NTC Thermistor Driver");
722MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
723MODULE_LICENSE("GPL");
724MODULE_ALIAS("platform:ntc-thermistor");
1/*
2 * ntc_thermistor.c - NTC Thermistors
3 *
4 * Copyright (C) 2010 Samsung Electronics
5 * MyungJoo Ham <myungjoo.ham@samsung.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 *
21 */
22
23#include <linux/slab.h>
24#include <linux/module.h>
25#include <linux/pm_runtime.h>
26#include <linux/math64.h>
27#include <linux/platform_device.h>
28#include <linux/err.h>
29#include <linux/of.h>
30#include <linux/of_device.h>
31
32#include <linux/platform_data/ntc_thermistor.h>
33
34#include <linux/iio/iio.h>
35#include <linux/iio/machine.h>
36#include <linux/iio/driver.h>
37#include <linux/iio/consumer.h>
38
39#include <linux/hwmon.h>
40#include <linux/hwmon-sysfs.h>
41
42struct ntc_compensation {
43 int temp_c;
44 unsigned int ohm;
45};
46
47/* Order matters, ntc_match references the entries by index */
48static const struct platform_device_id ntc_thermistor_id[] = {
49 { "ncp15wb473", TYPE_NCPXXWB473 },
50 { "ncp18wb473", TYPE_NCPXXWB473 },
51 { "ncp21wb473", TYPE_NCPXXWB473 },
52 { "ncp03wb473", TYPE_NCPXXWB473 },
53 { "ncp15wl333", TYPE_NCPXXWL333 },
54 { },
55};
56
57/*
58 * A compensation table should be sorted by the values of .ohm
59 * in descending order.
60 * The following compensation tables are from the specification of Murata NTC
61 * Thermistors Datasheet
62 */
63static const struct ntc_compensation ncpXXwb473[] = {
64 { .temp_c = -40, .ohm = 1747920 },
65 { .temp_c = -35, .ohm = 1245428 },
66 { .temp_c = -30, .ohm = 898485 },
67 { .temp_c = -25, .ohm = 655802 },
68 { .temp_c = -20, .ohm = 483954 },
69 { .temp_c = -15, .ohm = 360850 },
70 { .temp_c = -10, .ohm = 271697 },
71 { .temp_c = -5, .ohm = 206463 },
72 { .temp_c = 0, .ohm = 158214 },
73 { .temp_c = 5, .ohm = 122259 },
74 { .temp_c = 10, .ohm = 95227 },
75 { .temp_c = 15, .ohm = 74730 },
76 { .temp_c = 20, .ohm = 59065 },
77 { .temp_c = 25, .ohm = 47000 },
78 { .temp_c = 30, .ohm = 37643 },
79 { .temp_c = 35, .ohm = 30334 },
80 { .temp_c = 40, .ohm = 24591 },
81 { .temp_c = 45, .ohm = 20048 },
82 { .temp_c = 50, .ohm = 16433 },
83 { .temp_c = 55, .ohm = 13539 },
84 { .temp_c = 60, .ohm = 11209 },
85 { .temp_c = 65, .ohm = 9328 },
86 { .temp_c = 70, .ohm = 7798 },
87 { .temp_c = 75, .ohm = 6544 },
88 { .temp_c = 80, .ohm = 5518 },
89 { .temp_c = 85, .ohm = 4674 },
90 { .temp_c = 90, .ohm = 3972 },
91 { .temp_c = 95, .ohm = 3388 },
92 { .temp_c = 100, .ohm = 2902 },
93 { .temp_c = 105, .ohm = 2494 },
94 { .temp_c = 110, .ohm = 2150 },
95 { .temp_c = 115, .ohm = 1860 },
96 { .temp_c = 120, .ohm = 1615 },
97 { .temp_c = 125, .ohm = 1406 },
98};
99static const struct ntc_compensation ncpXXwl333[] = {
100 { .temp_c = -40, .ohm = 1610154 },
101 { .temp_c = -35, .ohm = 1130850 },
102 { .temp_c = -30, .ohm = 802609 },
103 { .temp_c = -25, .ohm = 575385 },
104 { .temp_c = -20, .ohm = 416464 },
105 { .temp_c = -15, .ohm = 304219 },
106 { .temp_c = -10, .ohm = 224193 },
107 { .temp_c = -5, .ohm = 166623 },
108 { .temp_c = 0, .ohm = 124850 },
109 { .temp_c = 5, .ohm = 94287 },
110 { .temp_c = 10, .ohm = 71747 },
111 { .temp_c = 15, .ohm = 54996 },
112 { .temp_c = 20, .ohm = 42455 },
113 { .temp_c = 25, .ohm = 33000 },
114 { .temp_c = 30, .ohm = 25822 },
115 { .temp_c = 35, .ohm = 20335 },
116 { .temp_c = 40, .ohm = 16115 },
117 { .temp_c = 45, .ohm = 12849 },
118 { .temp_c = 50, .ohm = 10306 },
119 { .temp_c = 55, .ohm = 8314 },
120 { .temp_c = 60, .ohm = 6746 },
121 { .temp_c = 65, .ohm = 5503 },
122 { .temp_c = 70, .ohm = 4513 },
123 { .temp_c = 75, .ohm = 3721 },
124 { .temp_c = 80, .ohm = 3084 },
125 { .temp_c = 85, .ohm = 2569 },
126 { .temp_c = 90, .ohm = 2151 },
127 { .temp_c = 95, .ohm = 1809 },
128 { .temp_c = 100, .ohm = 1529 },
129 { .temp_c = 105, .ohm = 1299 },
130 { .temp_c = 110, .ohm = 1108 },
131 { .temp_c = 115, .ohm = 949 },
132 { .temp_c = 120, .ohm = 817 },
133 { .temp_c = 125, .ohm = 707 },
134};
135
136struct ntc_data {
137 struct device *hwmon_dev;
138 struct ntc_thermistor_platform_data *pdata;
139 const struct ntc_compensation *comp;
140 struct device *dev;
141 int n_comp;
142 char name[PLATFORM_NAME_SIZE];
143};
144
145#if defined(CONFIG_OF) && IS_ENABLED(CONFIG_IIO)
146static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata)
147{
148 struct iio_channel *channel = pdata->chan;
149 s64 result;
150 int val, ret;
151
152 ret = iio_read_channel_raw(channel, &val);
153 if (ret < 0) {
154 pr_err("read channel() error: %d\n", ret);
155 return ret;
156 }
157
158 /* unit: mV */
159 result = pdata->pullup_uv * (s64) val;
160 result >>= 12;
161
162 return (int)result;
163}
164
165static const struct of_device_id ntc_match[] = {
166 { .compatible = "ntc,ncp15wb473",
167 .data = &ntc_thermistor_id[0] },
168 { .compatible = "ntc,ncp18wb473",
169 .data = &ntc_thermistor_id[1] },
170 { .compatible = "ntc,ncp21wb473",
171 .data = &ntc_thermistor_id[2] },
172 { .compatible = "ntc,ncp03wb473",
173 .data = &ntc_thermistor_id[3] },
174 { .compatible = "ntc,ncp15wl333",
175 .data = &ntc_thermistor_id[4] },
176 { },
177};
178MODULE_DEVICE_TABLE(of, ntc_match);
179
180static struct ntc_thermistor_platform_data *
181ntc_thermistor_parse_dt(struct platform_device *pdev)
182{
183 struct iio_channel *chan;
184 struct device_node *np = pdev->dev.of_node;
185 struct ntc_thermistor_platform_data *pdata;
186
187 if (!np)
188 return NULL;
189
190 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
191 if (!pdata)
192 return ERR_PTR(-ENOMEM);
193
194 chan = iio_channel_get(&pdev->dev, NULL);
195 if (IS_ERR(chan))
196 return ERR_CAST(chan);
197
198 if (of_property_read_u32(np, "pullup-uv", &pdata->pullup_uv))
199 return ERR_PTR(-ENODEV);
200 if (of_property_read_u32(np, "pullup-ohm", &pdata->pullup_ohm))
201 return ERR_PTR(-ENODEV);
202 if (of_property_read_u32(np, "pulldown-ohm", &pdata->pulldown_ohm))
203 return ERR_PTR(-ENODEV);
204
205 if (of_find_property(np, "connected-positive", NULL))
206 pdata->connect = NTC_CONNECTED_POSITIVE;
207 else /* status change should be possible if not always on. */
208 pdata->connect = NTC_CONNECTED_GROUND;
209
210 pdata->chan = chan;
211 pdata->read_uv = ntc_adc_iio_read;
212
213 return pdata;
214}
215static void ntc_iio_channel_release(struct ntc_thermistor_platform_data *pdata)
216{
217 if (pdata->chan)
218 iio_channel_release(pdata->chan);
219}
220#else
221static struct ntc_thermistor_platform_data *
222ntc_thermistor_parse_dt(struct platform_device *pdev)
223{
224 return NULL;
225}
226
227#define ntc_match NULL
228
229static void ntc_iio_channel_release(struct ntc_thermistor_platform_data *pdata)
230{ }
231#endif
232
233static inline u64 div64_u64_safe(u64 dividend, u64 divisor)
234{
235 if (divisor == 0 && dividend == 0)
236 return 0;
237 if (divisor == 0)
238 return UINT_MAX;
239 return div64_u64(dividend, divisor);
240}
241
242static int get_ohm_of_thermistor(struct ntc_data *data, unsigned int uv)
243{
244 struct ntc_thermistor_platform_data *pdata = data->pdata;
245 u64 mv = uv / 1000;
246 u64 pmv = pdata->pullup_uv / 1000;
247 u64 n, puo, pdo;
248 puo = pdata->pullup_ohm;
249 pdo = pdata->pulldown_ohm;
250
251 if (mv == 0) {
252 if (pdata->connect == NTC_CONNECTED_POSITIVE)
253 return INT_MAX;
254 return 0;
255 }
256 if (mv >= pmv)
257 return (pdata->connect == NTC_CONNECTED_POSITIVE) ?
258 0 : INT_MAX;
259
260 if (pdata->connect == NTC_CONNECTED_POSITIVE && puo == 0)
261 n = div64_u64_safe(pdo * (pmv - mv), mv);
262 else if (pdata->connect == NTC_CONNECTED_GROUND && pdo == 0)
263 n = div64_u64_safe(puo * mv, pmv - mv);
264 else if (pdata->connect == NTC_CONNECTED_POSITIVE)
265 n = div64_u64_safe(pdo * puo * (pmv - mv),
266 puo * mv - pdo * (pmv - mv));
267 else
268 n = div64_u64_safe(pdo * puo * mv, pdo * (pmv - mv) - puo * mv);
269
270 if (n > INT_MAX)
271 n = INT_MAX;
272 return n;
273}
274
275static void lookup_comp(struct ntc_data *data, unsigned int ohm,
276 int *i_low, int *i_high)
277{
278 int start, end, mid;
279
280 /*
281 * Handle special cases: Resistance is higher than or equal to
282 * resistance in first table entry, or resistance is lower or equal
283 * to resistance in last table entry.
284 * In these cases, return i_low == i_high, either pointing to the
285 * beginning or to the end of the table depending on the condition.
286 */
287 if (ohm >= data->comp[0].ohm) {
288 *i_low = 0;
289 *i_high = 0;
290 return;
291 }
292 if (ohm <= data->comp[data->n_comp - 1].ohm) {
293 *i_low = data->n_comp - 1;
294 *i_high = data->n_comp - 1;
295 return;
296 }
297
298 /* Do a binary search on compensation table */
299 start = 0;
300 end = data->n_comp;
301 while (start < end) {
302 mid = start + (end - start) / 2;
303 /*
304 * start <= mid < end
305 * data->comp[start].ohm > ohm >= data->comp[end].ohm
306 *
307 * We could check for "ohm == data->comp[mid].ohm" here, but
308 * that is a quite unlikely condition, and we would have to
309 * check again after updating start. Check it at the end instead
310 * for simplicity.
311 */
312 if (ohm >= data->comp[mid].ohm) {
313 end = mid;
314 } else {
315 start = mid + 1;
316 /*
317 * ohm >= data->comp[start].ohm might be true here,
318 * since we set start to mid + 1. In that case, we are
319 * done. We could keep going, but the condition is quite
320 * likely to occur, so it is worth checking for it.
321 */
322 if (ohm >= data->comp[start].ohm)
323 end = start;
324 }
325 /*
326 * start <= end
327 * data->comp[start].ohm >= ohm >= data->comp[end].ohm
328 */
329 }
330 /*
331 * start == end
332 * ohm >= data->comp[end].ohm
333 */
334 *i_low = end;
335 if (ohm == data->comp[end].ohm)
336 *i_high = end;
337 else
338 *i_high = end - 1;
339}
340
341static int get_temp_mc(struct ntc_data *data, unsigned int ohm)
342{
343 int low, high;
344 int temp;
345
346 lookup_comp(data, ohm, &low, &high);
347 if (low == high) {
348 /* Unable to use linear approximation */
349 temp = data->comp[low].temp_c * 1000;
350 } else {
351 temp = data->comp[low].temp_c * 1000 +
352 ((data->comp[high].temp_c - data->comp[low].temp_c) *
353 1000 * ((int)ohm - (int)data->comp[low].ohm)) /
354 ((int)data->comp[high].ohm - (int)data->comp[low].ohm);
355 }
356 return temp;
357}
358
359static int ntc_thermistor_get_ohm(struct ntc_data *data)
360{
361 int read_uv;
362
363 if (data->pdata->read_ohm)
364 return data->pdata->read_ohm();
365
366 if (data->pdata->read_uv) {
367 read_uv = data->pdata->read_uv(data->pdata);
368 if (read_uv < 0)
369 return read_uv;
370 return get_ohm_of_thermistor(data, read_uv);
371 }
372 return -EINVAL;
373}
374
375static ssize_t ntc_show_name(struct device *dev,
376 struct device_attribute *attr, char *buf)
377{
378 struct ntc_data *data = dev_get_drvdata(dev);
379
380 return sprintf(buf, "%s\n", data->name);
381}
382
383static ssize_t ntc_show_type(struct device *dev,
384 struct device_attribute *attr, char *buf)
385{
386 return sprintf(buf, "4\n");
387}
388
389static ssize_t ntc_show_temp(struct device *dev,
390 struct device_attribute *attr, char *buf)
391{
392 struct ntc_data *data = dev_get_drvdata(dev);
393 int ohm;
394
395 ohm = ntc_thermistor_get_ohm(data);
396 if (ohm < 0)
397 return ohm;
398
399 return sprintf(buf, "%d\n", get_temp_mc(data, ohm));
400}
401
402static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO, ntc_show_type, NULL, 0);
403static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ntc_show_temp, NULL, 0);
404static DEVICE_ATTR(name, S_IRUGO, ntc_show_name, NULL);
405
406static struct attribute *ntc_attributes[] = {
407 &dev_attr_name.attr,
408 &sensor_dev_attr_temp1_type.dev_attr.attr,
409 &sensor_dev_attr_temp1_input.dev_attr.attr,
410 NULL,
411};
412
413static const struct attribute_group ntc_attr_group = {
414 .attrs = ntc_attributes,
415};
416
417static int ntc_thermistor_probe(struct platform_device *pdev)
418{
419 const struct of_device_id *of_id =
420 of_match_device(of_match_ptr(ntc_match), &pdev->dev);
421 const struct platform_device_id *pdev_id;
422 struct ntc_thermistor_platform_data *pdata;
423 struct ntc_data *data;
424 int ret;
425
426 pdata = ntc_thermistor_parse_dt(pdev);
427 if (IS_ERR(pdata))
428 return PTR_ERR(pdata);
429 else if (pdata == NULL)
430 pdata = dev_get_platdata(&pdev->dev);
431
432 if (!pdata) {
433 dev_err(&pdev->dev, "No platform init data supplied.\n");
434 return -ENODEV;
435 }
436
437 /* Either one of the two is required. */
438 if (!pdata->read_uv && !pdata->read_ohm) {
439 dev_err(&pdev->dev,
440 "Both read_uv and read_ohm missing. Need either one of the two.\n");
441 return -EINVAL;
442 }
443
444 if (pdata->read_uv && pdata->read_ohm) {
445 dev_warn(&pdev->dev,
446 "Only one of read_uv and read_ohm is needed; ignoring read_uv.\n");
447 pdata->read_uv = NULL;
448 }
449
450 if (pdata->read_uv && (pdata->pullup_uv == 0 ||
451 (pdata->pullup_ohm == 0 && pdata->connect ==
452 NTC_CONNECTED_GROUND) ||
453 (pdata->pulldown_ohm == 0 && pdata->connect ==
454 NTC_CONNECTED_POSITIVE) ||
455 (pdata->connect != NTC_CONNECTED_POSITIVE &&
456 pdata->connect != NTC_CONNECTED_GROUND))) {
457 dev_err(&pdev->dev,
458 "Required data to use read_uv not supplied.\n");
459 return -EINVAL;
460 }
461
462 data = devm_kzalloc(&pdev->dev, sizeof(struct ntc_data), GFP_KERNEL);
463 if (!data)
464 return -ENOMEM;
465
466 pdev_id = of_id ? of_id->data : platform_get_device_id(pdev);
467
468 data->dev = &pdev->dev;
469 data->pdata = pdata;
470 strlcpy(data->name, pdev_id->name, sizeof(data->name));
471
472 switch (pdev_id->driver_data) {
473 case TYPE_NCPXXWB473:
474 data->comp = ncpXXwb473;
475 data->n_comp = ARRAY_SIZE(ncpXXwb473);
476 break;
477 case TYPE_NCPXXWL333:
478 data->comp = ncpXXwl333;
479 data->n_comp = ARRAY_SIZE(ncpXXwl333);
480 break;
481 default:
482 dev_err(&pdev->dev, "Unknown device type: %lu(%s)\n",
483 pdev_id->driver_data, pdev_id->name);
484 return -EINVAL;
485 }
486
487 platform_set_drvdata(pdev, data);
488
489 ret = sysfs_create_group(&data->dev->kobj, &ntc_attr_group);
490 if (ret) {
491 dev_err(data->dev, "unable to create sysfs files\n");
492 return ret;
493 }
494
495 data->hwmon_dev = hwmon_device_register(data->dev);
496 if (IS_ERR(data->hwmon_dev)) {
497 dev_err(data->dev, "unable to register as hwmon device.\n");
498 ret = PTR_ERR(data->hwmon_dev);
499 goto err_after_sysfs;
500 }
501
502 dev_info(&pdev->dev, "Thermistor type: %s successfully probed.\n",
503 pdev->name);
504
505 return 0;
506err_after_sysfs:
507 sysfs_remove_group(&data->dev->kobj, &ntc_attr_group);
508 ntc_iio_channel_release(pdata);
509 return ret;
510}
511
512static int ntc_thermistor_remove(struct platform_device *pdev)
513{
514 struct ntc_data *data = platform_get_drvdata(pdev);
515 struct ntc_thermistor_platform_data *pdata = data->pdata;
516
517 hwmon_device_unregister(data->hwmon_dev);
518 sysfs_remove_group(&data->dev->kobj, &ntc_attr_group);
519 ntc_iio_channel_release(pdata);
520
521 return 0;
522}
523
524static struct platform_driver ntc_thermistor_driver = {
525 .driver = {
526 .name = "ntc-thermistor",
527 .owner = THIS_MODULE,
528 .of_match_table = of_match_ptr(ntc_match),
529 },
530 .probe = ntc_thermistor_probe,
531 .remove = ntc_thermistor_remove,
532 .id_table = ntc_thermistor_id,
533};
534
535module_platform_driver(ntc_thermistor_driver);
536
537MODULE_DESCRIPTION("NTC Thermistor Driver");
538MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
539MODULE_LICENSE("GPL");
540MODULE_ALIAS("platform:ntc-thermistor");