Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Intel MID PCI support
4 * Copyright (c) 2008 Intel Corporation
5 * Jesse Barnes <jesse.barnes@intel.com>
6 *
7 * Moorestown has an interesting PCI implementation:
8 * - configuration space is memory mapped (as defined by MCFG)
9 * - Lincroft devices also have a real, type 1 configuration space
10 * - Early Lincroft silicon has a type 1 access bug that will cause
11 * a hang if non-existent devices are accessed
12 * - some devices have the "fixed BAR" capability, which means
13 * they can't be relocated or modified; check for that during
14 * BAR sizing
15 *
16 * So, we use the MCFG space for all reads and writes, but also send
17 * Lincroft writes to type 1 space. But only read/write if the device
18 * actually exists, otherwise return all 1s for reads and bit bucket
19 * the writes.
20 */
21
22#include <linux/sched.h>
23#include <linux/pci.h>
24#include <linux/ioport.h>
25#include <linux/init.h>
26#include <linux/dmi.h>
27#include <linux/acpi.h>
28#include <linux/io.h>
29#include <linux/smp.h>
30
31#include <asm/segment.h>
32#include <asm/pci_x86.h>
33#include <asm/hw_irq.h>
34#include <asm/io_apic.h>
35#include <asm/intel-mid.h>
36
37#define PCIE_CAP_OFFSET 0x100
38
39/* Quirks for the listed devices */
40#define PCI_DEVICE_ID_INTEL_MRFLD_MMC 0x1190
41#define PCI_DEVICE_ID_INTEL_MRFLD_HSU 0x1191
42
43/* Fixed BAR fields */
44#define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00 /* Fixed BAR (TBD) */
45#define PCI_FIXED_BAR_0_SIZE 0x04
46#define PCI_FIXED_BAR_1_SIZE 0x08
47#define PCI_FIXED_BAR_2_SIZE 0x0c
48#define PCI_FIXED_BAR_3_SIZE 0x10
49#define PCI_FIXED_BAR_4_SIZE 0x14
50#define PCI_FIXED_BAR_5_SIZE 0x1c
51
52static int pci_soc_mode;
53
54/**
55 * fixed_bar_cap - return the offset of the fixed BAR cap if found
56 * @bus: PCI bus
57 * @devfn: device in question
58 *
59 * Look for the fixed BAR cap on @bus and @devfn, returning its offset
60 * if found or 0 otherwise.
61 */
62static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn)
63{
64 int pos;
65 u32 pcie_cap = 0, cap_data;
66
67 pos = PCIE_CAP_OFFSET;
68
69 if (!raw_pci_ext_ops)
70 return 0;
71
72 while (pos) {
73 if (raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
74 devfn, pos, 4, &pcie_cap))
75 return 0;
76
77 if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 ||
78 PCI_EXT_CAP_ID(pcie_cap) == 0xffff)
79 break;
80
81 if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) {
82 raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
83 devfn, pos + 4, 4, &cap_data);
84 if ((cap_data & 0xffff) == PCIE_VNDR_CAP_ID_FIXED_BAR)
85 return pos;
86 }
87
88 pos = PCI_EXT_CAP_NEXT(pcie_cap);
89 }
90
91 return 0;
92}
93
94static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
95 int reg, int len, u32 val, int offset)
96{
97 u32 size;
98 unsigned int domain, busnum;
99 int bar = (reg - PCI_BASE_ADDRESS_0) >> 2;
100
101 domain = pci_domain_nr(bus);
102 busnum = bus->number;
103
104 if (val == ~0 && len == 4) {
105 unsigned long decode;
106
107 raw_pci_ext_ops->read(domain, busnum, devfn,
108 offset + 8 + (bar * 4), 4, &size);
109
110 /* Turn the size into a decode pattern for the sizing code */
111 if (size) {
112 decode = size - 1;
113 decode |= decode >> 1;
114 decode |= decode >> 2;
115 decode |= decode >> 4;
116 decode |= decode >> 8;
117 decode |= decode >> 16;
118 decode++;
119 decode = ~(decode - 1);
120 } else {
121 decode = 0;
122 }
123
124 /*
125 * If val is all ones, the core code is trying to size the reg,
126 * so update the mmconfig space with the real size.
127 *
128 * Note: this assumes the fixed size we got is a power of two.
129 */
130 return raw_pci_ext_ops->write(domain, busnum, devfn, reg, 4,
131 decode);
132 }
133
134 /* This is some other kind of BAR write, so just do it. */
135 return raw_pci_ext_ops->write(domain, busnum, devfn, reg, len, val);
136}
137
138/**
139 * type1_access_ok - check whether to use type 1
140 * @bus: bus number
141 * @devfn: device & function in question
142 *
143 * If the bus is on a Lincroft chip and it exists, or is not on a Lincroft at
144 * all, the we can go ahead with any reads & writes. If it's on a Lincroft,
145 * but doesn't exist, avoid the access altogether to keep the chip from
146 * hanging.
147 */
148static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
149{
150 /*
151 * This is a workaround for A0 LNC bug where PCI status register does
152 * not have new CAP bit set. can not be written by SW either.
153 *
154 * PCI header type in real LNC indicates a single function device, this
155 * will prevent probing other devices under the same function in PCI
156 * shim. Therefore, use the header type in shim instead.
157 */
158 if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE)
159 return false;
160 if (bus == 0 && (devfn == PCI_DEVFN(2, 0)
161 || devfn == PCI_DEVFN(0, 0)
162 || devfn == PCI_DEVFN(3, 0)))
163 return true;
164 return false; /* Langwell on others */
165}
166
167static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
168 int size, u32 *value)
169{
170 if (type1_access_ok(bus->number, devfn, where))
171 return pci_direct_conf1.read(pci_domain_nr(bus), bus->number,
172 devfn, where, size, value);
173 return raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
174 devfn, where, size, value);
175}
176
177static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
178 int size, u32 value)
179{
180 int offset;
181
182 /*
183 * On MRST, there is no PCI ROM BAR, this will cause a subsequent read
184 * to ROM BAR return 0 then being ignored.
185 */
186 if (where == PCI_ROM_ADDRESS)
187 return 0;
188
189 /*
190 * Devices with fixed BARs need special handling:
191 * - BAR sizing code will save, write ~0, read size, restore
192 * - so writes to fixed BARs need special handling
193 * - other writes to fixed BAR devices should go through mmconfig
194 */
195 offset = fixed_bar_cap(bus, devfn);
196 if (offset &&
197 (where >= PCI_BASE_ADDRESS_0 && where <= PCI_BASE_ADDRESS_5)) {
198 return pci_device_update_fixed(bus, devfn, where, size, value,
199 offset);
200 }
201
202 /*
203 * On Moorestown update both real & mmconfig space
204 * Note: early Lincroft silicon can't handle type 1 accesses to
205 * non-existent devices, so just eat the write in that case.
206 */
207 if (type1_access_ok(bus->number, devfn, where))
208 return pci_direct_conf1.write(pci_domain_nr(bus), bus->number,
209 devfn, where, size, value);
210 return raw_pci_ext_ops->write(pci_domain_nr(bus), bus->number, devfn,
211 where, size, value);
212}
213
214static int intel_mid_pci_irq_enable(struct pci_dev *dev)
215{
216 struct irq_alloc_info info;
217 int polarity;
218 int ret;
219 u8 gsi;
220
221 if (dev->irq_managed && dev->irq > 0)
222 return 0;
223
224 ret = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi);
225 if (ret < 0) {
226 dev_warn(&dev->dev, "Failed to read interrupt line: %d\n", ret);
227 return ret;
228 }
229
230 switch (intel_mid_identify_cpu()) {
231 case INTEL_MID_CPU_CHIP_TANGIER:
232 polarity = IOAPIC_POL_HIGH;
233
234 /* Special treatment for IRQ0 */
235 if (gsi == 0) {
236 /*
237 * Skip HS UART common registers device since it has
238 * IRQ0 assigned and not used by the kernel.
239 */
240 if (dev->device == PCI_DEVICE_ID_INTEL_MRFLD_HSU)
241 return -EBUSY;
242 /*
243 * TNG has IRQ0 assigned to eMMC controller. But there
244 * are also other devices with bogus PCI configuration
245 * that have IRQ0 assigned. This check ensures that
246 * eMMC gets it. The rest of devices still could be
247 * enabled without interrupt line being allocated.
248 */
249 if (dev->device != PCI_DEVICE_ID_INTEL_MRFLD_MMC)
250 return 0;
251 }
252 break;
253 default:
254 polarity = IOAPIC_POL_LOW;
255 break;
256 }
257
258 ioapic_set_alloc_attr(&info, dev_to_node(&dev->dev), 1, polarity);
259
260 /*
261 * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
262 * IOAPIC RTE entries, so we just enable RTE for the device.
263 */
264 ret = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC, &info);
265 if (ret < 0)
266 return ret;
267
268 dev->irq = ret;
269 dev->irq_managed = 1;
270
271 return 0;
272}
273
274static void intel_mid_pci_irq_disable(struct pci_dev *dev)
275{
276 if (!mp_should_keep_irq(&dev->dev) && dev->irq_managed &&
277 dev->irq > 0) {
278 mp_unmap_irq(dev->irq);
279 dev->irq_managed = 0;
280 }
281}
282
283static const struct pci_ops intel_mid_pci_ops __initconst = {
284 .read = pci_read,
285 .write = pci_write,
286};
287
288/**
289 * intel_mid_pci_init - installs intel_mid_pci_ops
290 *
291 * Moorestown has an interesting PCI implementation (see above).
292 * Called when the early platform detection installs it.
293 */
294int __init intel_mid_pci_init(void)
295{
296 pr_info("Intel MID platform detected, using MID PCI ops\n");
297 pci_mmcfg_late_init();
298 pcibios_enable_irq = intel_mid_pci_irq_enable;
299 pcibios_disable_irq = intel_mid_pci_irq_disable;
300 pci_root_ops = intel_mid_pci_ops;
301 pci_soc_mode = 1;
302 /* Continue with standard init */
303 acpi_noirq_set();
304 return 1;
305}
306
307/*
308 * Langwell devices are not true PCI devices; they are not subject to 10 ms
309 * d3 to d0 delay required by PCI spec.
310 */
311static void pci_d3delay_fixup(struct pci_dev *dev)
312{
313 /*
314 * PCI fixups are effectively decided compile time. If we have a dual
315 * SoC/non-SoC kernel we don't want to mangle d3 on non-SoC devices.
316 */
317 if (!pci_soc_mode)
318 return;
319 /*
320 * True PCI devices in Lincroft should allow type 1 access, the rest
321 * are Langwell fake PCI devices.
322 */
323 if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID))
324 return;
325 dev->d3_delay = 0;
326}
327DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup);
328
329static void mid_power_off_one_device(struct pci_dev *dev)
330{
331 u16 pmcsr;
332
333 /*
334 * Update current state first, otherwise PCI core enforces PCI_D0 in
335 * pci_set_power_state() for devices which status was PCI_UNKNOWN.
336 */
337 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
338 dev->current_state = (pci_power_t __force)(pmcsr & PCI_PM_CTRL_STATE_MASK);
339
340 pci_set_power_state(dev, PCI_D3hot);
341}
342
343static void mid_power_off_devices(struct pci_dev *dev)
344{
345 int id;
346
347 if (!pci_soc_mode)
348 return;
349
350 id = intel_mid_pwr_get_lss_id(dev);
351 if (id < 0)
352 return;
353
354 /*
355 * This sets only PMCSR bits. The actual power off will happen in
356 * arch/x86/platform/intel-mid/pwr.c.
357 */
358 mid_power_off_one_device(dev);
359}
360
361DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, mid_power_off_devices);
362
363/*
364 * Langwell devices reside at fixed offsets, don't try to move them.
365 */
366static void pci_fixed_bar_fixup(struct pci_dev *dev)
367{
368 unsigned long offset;
369 u32 size;
370 int i;
371
372 if (!pci_soc_mode)
373 return;
374
375 /* Must have extended configuration space */
376 if (dev->cfg_size < PCIE_CAP_OFFSET + 4)
377 return;
378
379 /* Fixup the BAR sizes for fixed BAR devices and make them unmoveable */
380 offset = fixed_bar_cap(dev->bus, dev->devfn);
381 if (!offset || PCI_DEVFN(2, 0) == dev->devfn ||
382 PCI_DEVFN(2, 2) == dev->devfn)
383 return;
384
385 for (i = 0; i < PCI_STD_NUM_BARS; i++) {
386 pci_read_config_dword(dev, offset + 8 + (i * 4), &size);
387 dev->resource[i].end = dev->resource[i].start + size - 1;
388 dev->resource[i].flags |= IORESOURCE_PCI_FIXED;
389 }
390}
391DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixed_bar_fixup);
1/*
2 * Intel MID PCI support
3 * Copyright (c) 2008 Intel Corporation
4 * Jesse Barnes <jesse.barnes@intel.com>
5 *
6 * Moorestown has an interesting PCI implementation:
7 * - configuration space is memory mapped (as defined by MCFG)
8 * - Lincroft devices also have a real, type 1 configuration space
9 * - Early Lincroft silicon has a type 1 access bug that will cause
10 * a hang if non-existent devices are accessed
11 * - some devices have the "fixed BAR" capability, which means
12 * they can't be relocated or modified; check for that during
13 * BAR sizing
14 *
15 * So, we use the MCFG space for all reads and writes, but also send
16 * Lincroft writes to type 1 space. But only read/write if the device
17 * actually exists, otherwise return all 1s for reads and bit bucket
18 * the writes.
19 */
20
21#include <linux/sched.h>
22#include <linux/pci.h>
23#include <linux/ioport.h>
24#include <linux/init.h>
25#include <linux/dmi.h>
26#include <linux/acpi.h>
27#include <linux/io.h>
28#include <linux/smp.h>
29
30#include <asm/segment.h>
31#include <asm/pci_x86.h>
32#include <asm/hw_irq.h>
33#include <asm/io_apic.h>
34#include <asm/intel-mid.h>
35
36#define PCIE_CAP_OFFSET 0x100
37
38/* Fixed BAR fields */
39#define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00 /* Fixed BAR (TBD) */
40#define PCI_FIXED_BAR_0_SIZE 0x04
41#define PCI_FIXED_BAR_1_SIZE 0x08
42#define PCI_FIXED_BAR_2_SIZE 0x0c
43#define PCI_FIXED_BAR_3_SIZE 0x10
44#define PCI_FIXED_BAR_4_SIZE 0x14
45#define PCI_FIXED_BAR_5_SIZE 0x1c
46
47static int pci_soc_mode;
48
49/**
50 * fixed_bar_cap - return the offset of the fixed BAR cap if found
51 * @bus: PCI bus
52 * @devfn: device in question
53 *
54 * Look for the fixed BAR cap on @bus and @devfn, returning its offset
55 * if found or 0 otherwise.
56 */
57static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn)
58{
59 int pos;
60 u32 pcie_cap = 0, cap_data;
61
62 pos = PCIE_CAP_OFFSET;
63
64 if (!raw_pci_ext_ops)
65 return 0;
66
67 while (pos) {
68 if (raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
69 devfn, pos, 4, &pcie_cap))
70 return 0;
71
72 if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 ||
73 PCI_EXT_CAP_ID(pcie_cap) == 0xffff)
74 break;
75
76 if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) {
77 raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
78 devfn, pos + 4, 4, &cap_data);
79 if ((cap_data & 0xffff) == PCIE_VNDR_CAP_ID_FIXED_BAR)
80 return pos;
81 }
82
83 pos = PCI_EXT_CAP_NEXT(pcie_cap);
84 }
85
86 return 0;
87}
88
89static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
90 int reg, int len, u32 val, int offset)
91{
92 u32 size;
93 unsigned int domain, busnum;
94 int bar = (reg - PCI_BASE_ADDRESS_0) >> 2;
95
96 domain = pci_domain_nr(bus);
97 busnum = bus->number;
98
99 if (val == ~0 && len == 4) {
100 unsigned long decode;
101
102 raw_pci_ext_ops->read(domain, busnum, devfn,
103 offset + 8 + (bar * 4), 4, &size);
104
105 /* Turn the size into a decode pattern for the sizing code */
106 if (size) {
107 decode = size - 1;
108 decode |= decode >> 1;
109 decode |= decode >> 2;
110 decode |= decode >> 4;
111 decode |= decode >> 8;
112 decode |= decode >> 16;
113 decode++;
114 decode = ~(decode - 1);
115 } else {
116 decode = 0;
117 }
118
119 /*
120 * If val is all ones, the core code is trying to size the reg,
121 * so update the mmconfig space with the real size.
122 *
123 * Note: this assumes the fixed size we got is a power of two.
124 */
125 return raw_pci_ext_ops->write(domain, busnum, devfn, reg, 4,
126 decode);
127 }
128
129 /* This is some other kind of BAR write, so just do it. */
130 return raw_pci_ext_ops->write(domain, busnum, devfn, reg, len, val);
131}
132
133/**
134 * type1_access_ok - check whether to use type 1
135 * @bus: bus number
136 * @devfn: device & function in question
137 *
138 * If the bus is on a Lincroft chip and it exists, or is not on a Lincroft at
139 * all, the we can go ahead with any reads & writes. If it's on a Lincroft,
140 * but doesn't exist, avoid the access altogether to keep the chip from
141 * hanging.
142 */
143static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
144{
145 /*
146 * This is a workaround for A0 LNC bug where PCI status register does
147 * not have new CAP bit set. can not be written by SW either.
148 *
149 * PCI header type in real LNC indicates a single function device, this
150 * will prevent probing other devices under the same function in PCI
151 * shim. Therefore, use the header type in shim instead.
152 */
153 if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE)
154 return false;
155 if (bus == 0 && (devfn == PCI_DEVFN(2, 0)
156 || devfn == PCI_DEVFN(0, 0)
157 || devfn == PCI_DEVFN(3, 0)))
158 return true;
159 return false; /* Langwell on others */
160}
161
162static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
163 int size, u32 *value)
164{
165 if (type1_access_ok(bus->number, devfn, where))
166 return pci_direct_conf1.read(pci_domain_nr(bus), bus->number,
167 devfn, where, size, value);
168 return raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
169 devfn, where, size, value);
170}
171
172static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
173 int size, u32 value)
174{
175 int offset;
176
177 /*
178 * On MRST, there is no PCI ROM BAR, this will cause a subsequent read
179 * to ROM BAR return 0 then being ignored.
180 */
181 if (where == PCI_ROM_ADDRESS)
182 return 0;
183
184 /*
185 * Devices with fixed BARs need special handling:
186 * - BAR sizing code will save, write ~0, read size, restore
187 * - so writes to fixed BARs need special handling
188 * - other writes to fixed BAR devices should go through mmconfig
189 */
190 offset = fixed_bar_cap(bus, devfn);
191 if (offset &&
192 (where >= PCI_BASE_ADDRESS_0 && where <= PCI_BASE_ADDRESS_5)) {
193 return pci_device_update_fixed(bus, devfn, where, size, value,
194 offset);
195 }
196
197 /*
198 * On Moorestown update both real & mmconfig space
199 * Note: early Lincroft silicon can't handle type 1 accesses to
200 * non-existent devices, so just eat the write in that case.
201 */
202 if (type1_access_ok(bus->number, devfn, where))
203 return pci_direct_conf1.write(pci_domain_nr(bus), bus->number,
204 devfn, where, size, value);
205 return raw_pci_ext_ops->write(pci_domain_nr(bus), bus->number, devfn,
206 where, size, value);
207}
208
209static int intel_mid_pci_irq_enable(struct pci_dev *dev)
210{
211 u8 pin;
212 struct io_apic_irq_attr irq_attr;
213
214 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
215
216 /*
217 * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
218 * IOAPIC RTE entries, so we just enable RTE for the device.
219 */
220 irq_attr.ioapic = mp_find_ioapic(dev->irq);
221 irq_attr.ioapic_pin = dev->irq;
222 irq_attr.trigger = 1; /* level */
223 if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER)
224 irq_attr.polarity = 0; /* active high */
225 else
226 irq_attr.polarity = 1; /* active low */
227 io_apic_set_pci_routing(&dev->dev, dev->irq, &irq_attr);
228
229 return 0;
230}
231
232struct pci_ops intel_mid_pci_ops = {
233 .read = pci_read,
234 .write = pci_write,
235};
236
237/**
238 * intel_mid_pci_init - installs intel_mid_pci_ops
239 *
240 * Moorestown has an interesting PCI implementation (see above).
241 * Called when the early platform detection installs it.
242 */
243int __init intel_mid_pci_init(void)
244{
245 pr_info("Intel MID platform detected, using MID PCI ops\n");
246 pci_mmcfg_late_init();
247 pcibios_enable_irq = intel_mid_pci_irq_enable;
248 pci_root_ops = intel_mid_pci_ops;
249 pci_soc_mode = 1;
250 /* Continue with standard init */
251 return 1;
252}
253
254/*
255 * Langwell devices are not true PCI devices; they are not subject to 10 ms
256 * d3 to d0 delay required by PCI spec.
257 */
258static void pci_d3delay_fixup(struct pci_dev *dev)
259{
260 /*
261 * PCI fixups are effectively decided compile time. If we have a dual
262 * SoC/non-SoC kernel we don't want to mangle d3 on non-SoC devices.
263 */
264 if (!pci_soc_mode)
265 return;
266 /*
267 * True PCI devices in Lincroft should allow type 1 access, the rest
268 * are Langwell fake PCI devices.
269 */
270 if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID))
271 return;
272 dev->d3_delay = 0;
273}
274DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup);
275
276static void mrst_power_off_unused_dev(struct pci_dev *dev)
277{
278 pci_set_power_state(dev, PCI_D3hot);
279}
280DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0801, mrst_power_off_unused_dev);
281DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0809, mrst_power_off_unused_dev);
282DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x080C, mrst_power_off_unused_dev);
283DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0812, mrst_power_off_unused_dev);
284DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0815, mrst_power_off_unused_dev);
285
286/*
287 * Langwell devices reside at fixed offsets, don't try to move them.
288 */
289static void pci_fixed_bar_fixup(struct pci_dev *dev)
290{
291 unsigned long offset;
292 u32 size;
293 int i;
294
295 if (!pci_soc_mode)
296 return;
297
298 /* Must have extended configuration space */
299 if (dev->cfg_size < PCIE_CAP_OFFSET + 4)
300 return;
301
302 /* Fixup the BAR sizes for fixed BAR devices and make them unmoveable */
303 offset = fixed_bar_cap(dev->bus, dev->devfn);
304 if (!offset || PCI_DEVFN(2, 0) == dev->devfn ||
305 PCI_DEVFN(2, 2) == dev->devfn)
306 return;
307
308 for (i = 0; i < PCI_ROM_RESOURCE; i++) {
309 pci_read_config_dword(dev, offset + 8 + (i * 4), &size);
310 dev->resource[i].end = dev->resource[i].start + size - 1;
311 dev->resource[i].flags |= IORESOURCE_PCI_FIXED;
312 }
313}
314DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixed_bar_fixup);