Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: GPL-2.0
2//
3// spi-mt7621.c -- MediaTek MT7621 SPI controller driver
4//
5// Copyright (C) 2011 Sergiy <piratfm@gmail.com>
6// Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
7// Copyright (C) 2014-2015 Felix Fietkau <nbd@nbd.name>
8//
9// Some parts are based on spi-orion.c:
10// Author: Shadi Ammouri <shadi@marvell.com>
11// Copyright (C) 2007-2008 Marvell Ltd.
12
13#include <linux/clk.h>
14#include <linux/delay.h>
15#include <linux/io.h>
16#include <linux/module.h>
17#include <linux/of_device.h>
18#include <linux/reset.h>
19#include <linux/spi/spi.h>
20
21#define DRIVER_NAME "spi-mt7621"
22
23/* in usec */
24#define RALINK_SPI_WAIT_MAX_LOOP 2000
25
26/* SPISTAT register bit field */
27#define SPISTAT_BUSY BIT(0)
28
29#define MT7621_SPI_TRANS 0x00
30#define SPITRANS_BUSY BIT(16)
31
32#define MT7621_SPI_OPCODE 0x04
33#define MT7621_SPI_DATA0 0x08
34#define MT7621_SPI_DATA4 0x18
35#define SPI_CTL_TX_RX_CNT_MASK 0xff
36#define SPI_CTL_START BIT(8)
37
38#define MT7621_SPI_MASTER 0x28
39#define MASTER_MORE_BUFMODE BIT(2)
40#define MASTER_FULL_DUPLEX BIT(10)
41#define MASTER_RS_CLK_SEL GENMASK(27, 16)
42#define MASTER_RS_CLK_SEL_SHIFT 16
43#define MASTER_RS_SLAVE_SEL GENMASK(31, 29)
44
45#define MT7621_SPI_MOREBUF 0x2c
46#define MT7621_SPI_POLAR 0x38
47#define MT7621_SPI_SPACE 0x3c
48
49#define MT7621_CPHA BIT(5)
50#define MT7621_CPOL BIT(4)
51#define MT7621_LSB_FIRST BIT(3)
52
53struct mt7621_spi {
54 struct spi_controller *master;
55 void __iomem *base;
56 unsigned int sys_freq;
57 unsigned int speed;
58 struct clk *clk;
59 int pending_write;
60};
61
62static inline struct mt7621_spi *spidev_to_mt7621_spi(struct spi_device *spi)
63{
64 return spi_controller_get_devdata(spi->master);
65}
66
67static inline u32 mt7621_spi_read(struct mt7621_spi *rs, u32 reg)
68{
69 return ioread32(rs->base + reg);
70}
71
72static inline void mt7621_spi_write(struct mt7621_spi *rs, u32 reg, u32 val)
73{
74 iowrite32(val, rs->base + reg);
75}
76
77static void mt7621_spi_set_cs(struct spi_device *spi, int enable)
78{
79 struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
80 int cs = spi->chip_select;
81 u32 polar = 0;
82 u32 master;
83
84 /*
85 * Select SPI device 7, enable "more buffer mode" and disable
86 * full-duplex (only half-duplex really works on this chip
87 * reliably)
88 */
89 master = mt7621_spi_read(rs, MT7621_SPI_MASTER);
90 master |= MASTER_RS_SLAVE_SEL | MASTER_MORE_BUFMODE;
91 master &= ~MASTER_FULL_DUPLEX;
92 mt7621_spi_write(rs, MT7621_SPI_MASTER, master);
93
94 rs->pending_write = 0;
95
96 if (enable)
97 polar = BIT(cs);
98 mt7621_spi_write(rs, MT7621_SPI_POLAR, polar);
99}
100
101static int mt7621_spi_prepare(struct spi_device *spi, unsigned int speed)
102{
103 struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
104 u32 rate;
105 u32 reg;
106
107 dev_dbg(&spi->dev, "speed:%u\n", speed);
108
109 rate = DIV_ROUND_UP(rs->sys_freq, speed);
110 dev_dbg(&spi->dev, "rate-1:%u\n", rate);
111
112 if (rate > 4097)
113 return -EINVAL;
114
115 if (rate < 2)
116 rate = 2;
117
118 reg = mt7621_spi_read(rs, MT7621_SPI_MASTER);
119 reg &= ~MASTER_RS_CLK_SEL;
120 reg |= (rate - 2) << MASTER_RS_CLK_SEL_SHIFT;
121 rs->speed = speed;
122
123 reg &= ~MT7621_LSB_FIRST;
124 if (spi->mode & SPI_LSB_FIRST)
125 reg |= MT7621_LSB_FIRST;
126
127 /*
128 * This SPI controller seems to be tested on SPI flash only and some
129 * bits are swizzled under other SPI modes probably due to incorrect
130 * wiring inside the silicon. Only mode 0 works correctly.
131 */
132 reg &= ~(MT7621_CPHA | MT7621_CPOL);
133
134 mt7621_spi_write(rs, MT7621_SPI_MASTER, reg);
135
136 return 0;
137}
138
139static inline int mt7621_spi_wait_till_ready(struct mt7621_spi *rs)
140{
141 int i;
142
143 for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
144 u32 status;
145
146 status = mt7621_spi_read(rs, MT7621_SPI_TRANS);
147 if ((status & SPITRANS_BUSY) == 0)
148 return 0;
149 cpu_relax();
150 udelay(1);
151 }
152
153 return -ETIMEDOUT;
154}
155
156static void mt7621_spi_read_half_duplex(struct mt7621_spi *rs,
157 int rx_len, u8 *buf)
158{
159 int tx_len;
160
161 /*
162 * Combine with any pending write, and perform one or more half-duplex
163 * transactions reading 'len' bytes. Data to be written is already in
164 * MT7621_SPI_DATA.
165 */
166 tx_len = rs->pending_write;
167 rs->pending_write = 0;
168
169 while (rx_len || tx_len) {
170 int i;
171 u32 val = (min(tx_len, 4) * 8) << 24;
172 int rx = min(rx_len, 32);
173
174 if (tx_len > 4)
175 val |= (tx_len - 4) * 8;
176 val |= (rx * 8) << 12;
177 mt7621_spi_write(rs, MT7621_SPI_MOREBUF, val);
178
179 tx_len = 0;
180
181 val = mt7621_spi_read(rs, MT7621_SPI_TRANS);
182 val |= SPI_CTL_START;
183 mt7621_spi_write(rs, MT7621_SPI_TRANS, val);
184
185 mt7621_spi_wait_till_ready(rs);
186
187 for (i = 0; i < rx; i++) {
188 if ((i % 4) == 0)
189 val = mt7621_spi_read(rs, MT7621_SPI_DATA0 + i);
190 *buf++ = val & 0xff;
191 val >>= 8;
192 }
193
194 rx_len -= i;
195 }
196}
197
198static inline void mt7621_spi_flush(struct mt7621_spi *rs)
199{
200 mt7621_spi_read_half_duplex(rs, 0, NULL);
201}
202
203static void mt7621_spi_write_half_duplex(struct mt7621_spi *rs,
204 int tx_len, const u8 *buf)
205{
206 int len = rs->pending_write;
207 int val = 0;
208
209 if (len & 3) {
210 val = mt7621_spi_read(rs, MT7621_SPI_OPCODE + (len & ~3));
211 if (len < 4) {
212 val <<= (4 - len) * 8;
213 val = swab32(val);
214 }
215 }
216
217 while (tx_len > 0) {
218 if (len >= 36) {
219 rs->pending_write = len;
220 mt7621_spi_flush(rs);
221 len = 0;
222 }
223
224 val |= *buf++ << (8 * (len & 3));
225 len++;
226 if ((len & 3) == 0) {
227 if (len == 4)
228 /* The byte-order of the opcode is weird! */
229 val = swab32(val);
230 mt7621_spi_write(rs, MT7621_SPI_OPCODE + len - 4, val);
231 val = 0;
232 }
233 tx_len -= 1;
234 }
235
236 if (len & 3) {
237 if (len < 4) {
238 val = swab32(val);
239 val >>= (4 - len) * 8;
240 }
241 mt7621_spi_write(rs, MT7621_SPI_OPCODE + (len & ~3), val);
242 }
243
244 rs->pending_write = len;
245}
246
247static int mt7621_spi_transfer_one_message(struct spi_controller *master,
248 struct spi_message *m)
249{
250 struct mt7621_spi *rs = spi_controller_get_devdata(master);
251 struct spi_device *spi = m->spi;
252 unsigned int speed = spi->max_speed_hz;
253 struct spi_transfer *t = NULL;
254 int status = 0;
255
256 mt7621_spi_wait_till_ready(rs);
257
258 list_for_each_entry(t, &m->transfers, transfer_list)
259 if (t->speed_hz < speed)
260 speed = t->speed_hz;
261
262 if (mt7621_spi_prepare(spi, speed)) {
263 status = -EIO;
264 goto msg_done;
265 }
266
267 /* Assert CS */
268 mt7621_spi_set_cs(spi, 1);
269
270 m->actual_length = 0;
271 list_for_each_entry(t, &m->transfers, transfer_list) {
272 if ((t->rx_buf) && (t->tx_buf)) {
273 /*
274 * This controller will shift some extra data out
275 * of spi_opcode if (mosi_bit_cnt > 0) &&
276 * (cmd_bit_cnt == 0). So the claimed full-duplex
277 * support is broken since we have no way to read
278 * the MISO value during that bit.
279 */
280 status = -EIO;
281 goto msg_done;
282 } else if (t->rx_buf) {
283 mt7621_spi_read_half_duplex(rs, t->len, t->rx_buf);
284 } else if (t->tx_buf) {
285 mt7621_spi_write_half_duplex(rs, t->len, t->tx_buf);
286 }
287 m->actual_length += t->len;
288 }
289
290 /* Flush data and deassert CS */
291 mt7621_spi_flush(rs);
292 mt7621_spi_set_cs(spi, 0);
293
294msg_done:
295 m->status = status;
296 spi_finalize_current_message(master);
297
298 return 0;
299}
300
301static int mt7621_spi_setup(struct spi_device *spi)
302{
303 struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
304
305 if ((spi->max_speed_hz == 0) ||
306 (spi->max_speed_hz > (rs->sys_freq / 2)))
307 spi->max_speed_hz = rs->sys_freq / 2;
308
309 if (spi->max_speed_hz < (rs->sys_freq / 4097)) {
310 dev_err(&spi->dev, "setup: requested speed is too low %d Hz\n",
311 spi->max_speed_hz);
312 return -EINVAL;
313 }
314
315 return 0;
316}
317
318static const struct of_device_id mt7621_spi_match[] = {
319 { .compatible = "ralink,mt7621-spi" },
320 {},
321};
322MODULE_DEVICE_TABLE(of, mt7621_spi_match);
323
324static int mt7621_spi_probe(struct platform_device *pdev)
325{
326 const struct of_device_id *match;
327 struct spi_controller *master;
328 struct mt7621_spi *rs;
329 void __iomem *base;
330 int status = 0;
331 struct clk *clk;
332 int ret;
333
334 match = of_match_device(mt7621_spi_match, &pdev->dev);
335 if (!match)
336 return -EINVAL;
337
338 base = devm_platform_ioremap_resource(pdev, 0);
339 if (IS_ERR(base))
340 return PTR_ERR(base);
341
342 clk = devm_clk_get(&pdev->dev, NULL);
343 if (IS_ERR(clk)) {
344 dev_err(&pdev->dev, "unable to get SYS clock, err=%d\n",
345 status);
346 return PTR_ERR(clk);
347 }
348
349 status = clk_prepare_enable(clk);
350 if (status)
351 return status;
352
353 master = spi_alloc_master(&pdev->dev, sizeof(*rs));
354 if (!master) {
355 dev_info(&pdev->dev, "master allocation failed\n");
356 return -ENOMEM;
357 }
358
359 master->mode_bits = SPI_LSB_FIRST;
360 master->flags = SPI_CONTROLLER_HALF_DUPLEX;
361 master->setup = mt7621_spi_setup;
362 master->transfer_one_message = mt7621_spi_transfer_one_message;
363 master->bits_per_word_mask = SPI_BPW_MASK(8);
364 master->dev.of_node = pdev->dev.of_node;
365 master->num_chipselect = 2;
366
367 dev_set_drvdata(&pdev->dev, master);
368
369 rs = spi_controller_get_devdata(master);
370 rs->base = base;
371 rs->clk = clk;
372 rs->master = master;
373 rs->sys_freq = clk_get_rate(rs->clk);
374 rs->pending_write = 0;
375 dev_info(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
376
377 ret = device_reset(&pdev->dev);
378 if (ret) {
379 dev_err(&pdev->dev, "SPI reset failed!\n");
380 return ret;
381 }
382
383 return devm_spi_register_controller(&pdev->dev, master);
384}
385
386static int mt7621_spi_remove(struct platform_device *pdev)
387{
388 struct spi_controller *master;
389 struct mt7621_spi *rs;
390
391 master = dev_get_drvdata(&pdev->dev);
392 rs = spi_controller_get_devdata(master);
393
394 clk_disable_unprepare(rs->clk);
395
396 return 0;
397}
398
399MODULE_ALIAS("platform:" DRIVER_NAME);
400
401static struct platform_driver mt7621_spi_driver = {
402 .driver = {
403 .name = DRIVER_NAME,
404 .of_match_table = mt7621_spi_match,
405 },
406 .probe = mt7621_spi_probe,
407 .remove = mt7621_spi_remove,
408};
409
410module_platform_driver(mt7621_spi_driver);
411
412MODULE_DESCRIPTION("MT7621 SPI driver");
413MODULE_AUTHOR("Felix Fietkau <nbd@nbd.name>");
414MODULE_LICENSE("GPL");