1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3**  System Bus Adapter (SBA) I/O MMU manager
   4**
   5**	(c) Copyright 2000-2004 Grant Grundler <grundler @ parisc-linux x org>
   6**	(c) Copyright 2004 Naresh Kumar Inna <knaresh at india x hp x com>
   7**	(c) Copyright 2000-2004 Hewlett-Packard Company
   8**
   9**	Portions (c) 1999 Dave S. Miller (from sparc64 I/O MMU code)
  10**
 
 
 
 
  11**
  12**
  13** This module initializes the IOC (I/O Controller) found on B1000/C3000/
  14** J5000/J7000/N-class/L-class machines and their successors.
  15**
  16** FIXME: add DMA hint support programming in both sba and lba modules.
  17*/
  18
  19#include <linux/types.h>
  20#include <linux/kernel.h>
  21#include <linux/spinlock.h>
  22#include <linux/slab.h>
  23#include <linux/init.h>
  24
  25#include <linux/mm.h>
  26#include <linux/string.h>
  27#include <linux/pci.h>
  28#include <linux/scatterlist.h>
  29#include <linux/iommu-helper.h>
  30
  31#include <asm/byteorder.h>
  32#include <asm/io.h>
  33#include <asm/dma.h>		/* for DMA_CHUNK_SIZE */
  34
  35#include <asm/hardware.h>	/* for register_parisc_driver() stuff */
  36
  37#include <linux/proc_fs.h>
  38#include <linux/seq_file.h>
  39#include <linux/module.h>
  40
  41#include <asm/ropes.h>
  42#include <asm/mckinley.h>	/* for proc_mckinley_root */
  43#include <asm/runway.h>		/* for proc_runway_root */
  44#include <asm/page.h>		/* for PAGE0 */
  45#include <asm/pdc.h>		/* for PDC_MODEL_* */
  46#include <asm/pdcpat.h>		/* for is_pdc_pat() */
  47#include <asm/parisc-device.h>
  48
  49#include "iommu.h"
  50
  51#define MODULE_NAME "SBA"
  52
  53/*
  54** The number of debug flags is a clue - this code is fragile.
  55** Don't even think about messing with it unless you have
  56** plenty of 710's to sacrifice to the computer gods. :^)
  57*/
  58#undef DEBUG_SBA_INIT
  59#undef DEBUG_SBA_RUN
  60#undef DEBUG_SBA_RUN_SG
  61#undef DEBUG_SBA_RESOURCE
  62#undef ASSERT_PDIR_SANITY
  63#undef DEBUG_LARGE_SG_ENTRIES
  64#undef DEBUG_DMB_TRAP
  65
  66#ifdef DEBUG_SBA_INIT
  67#define DBG_INIT(x...)	printk(x)
  68#else
  69#define DBG_INIT(x...)
  70#endif
  71
  72#ifdef DEBUG_SBA_RUN
  73#define DBG_RUN(x...)	printk(x)
  74#else
  75#define DBG_RUN(x...)
  76#endif
  77
  78#ifdef DEBUG_SBA_RUN_SG
  79#define DBG_RUN_SG(x...)	printk(x)
  80#else
  81#define DBG_RUN_SG(x...)
  82#endif
  83
  84
  85#ifdef DEBUG_SBA_RESOURCE
  86#define DBG_RES(x...)	printk(x)
  87#else
  88#define DBG_RES(x...)
  89#endif
  90
  91#define SBA_INLINE	__inline__
  92
  93#define DEFAULT_DMA_HINT_REG	0
  94
  95struct sba_device *sba_list;
  96EXPORT_SYMBOL_GPL(sba_list);
  97
  98static unsigned long ioc_needs_fdc = 0;
  99
 100/* global count of IOMMUs in the system */
 101static unsigned int global_ioc_cnt = 0;
 102
 103/* PA8700 (Piranha 2.2) bug workaround */
 104static unsigned long piranha_bad_128k = 0;
 105
 106/* Looks nice and keeps the compiler happy */
 107#define SBA_DEV(d) ((struct sba_device *) (d))
 108
 109#ifdef CONFIG_AGP_PARISC
 110#define SBA_AGP_SUPPORT
 111#endif /*CONFIG_AGP_PARISC*/
 112
 113#ifdef SBA_AGP_SUPPORT
 114static int sba_reserve_agpgart = 1;
 115module_param(sba_reserve_agpgart, int, 0444);
 116MODULE_PARM_DESC(sba_reserve_agpgart, "Reserve half of IO pdir as AGPGART");
 117#endif
 118
 119
 120/************************************
 121** SBA register read and write support
 122**
 123** BE WARNED: register writes are posted.
 124**  (ie follow writes which must reach HW with a read)
 125**
 126** Superdome (in particular, REO) allows only 64-bit CSR accesses.
 127*/
 128#define READ_REG32(addr)	readl(addr)
 129#define READ_REG64(addr)	readq(addr)
 130#define WRITE_REG32(val, addr)	writel((val), (addr))
 131#define WRITE_REG64(val, addr)	writeq((val), (addr))
 132
 133#ifdef CONFIG_64BIT
 134#define READ_REG(addr)		READ_REG64(addr)
 135#define WRITE_REG(value, addr)	WRITE_REG64(value, addr)
 136#else
 137#define READ_REG(addr)		READ_REG32(addr)
 138#define WRITE_REG(value, addr)	WRITE_REG32(value, addr)
 139#endif
 140
 141#ifdef DEBUG_SBA_INIT
 142
 143/* NOTE: When CONFIG_64BIT isn't defined, READ_REG64() is two 32-bit reads */
 144
 145/**
 146 * sba_dump_ranges - debugging only - print ranges assigned to this IOA
 147 * @hpa: base address of the sba
 148 *
 149 * Print the MMIO and IO Port address ranges forwarded by an Astro/Ike/RIO
 150 * IO Adapter (aka Bus Converter).
 151 */
 152static void
 153sba_dump_ranges(void __iomem *hpa)
 154{
 155	DBG_INIT("SBA at 0x%p\n", hpa);
 156	DBG_INIT("IOS_DIST_BASE   : %Lx\n", READ_REG64(hpa+IOS_DIST_BASE));
 157	DBG_INIT("IOS_DIST_MASK   : %Lx\n", READ_REG64(hpa+IOS_DIST_MASK));
 158	DBG_INIT("IOS_DIST_ROUTE  : %Lx\n", READ_REG64(hpa+IOS_DIST_ROUTE));
 159	DBG_INIT("\n");
 160	DBG_INIT("IOS_DIRECT_BASE : %Lx\n", READ_REG64(hpa+IOS_DIRECT_BASE));
 161	DBG_INIT("IOS_DIRECT_MASK : %Lx\n", READ_REG64(hpa+IOS_DIRECT_MASK));
 162	DBG_INIT("IOS_DIRECT_ROUTE: %Lx\n", READ_REG64(hpa+IOS_DIRECT_ROUTE));
 163}
 164
 165/**
 166 * sba_dump_tlb - debugging only - print IOMMU operating parameters
 167 * @hpa: base address of the IOMMU
 168 *
 169 * Print the size/location of the IO MMU PDIR.
 170 */
 171static void sba_dump_tlb(void __iomem *hpa)
 172{
 173	DBG_INIT("IO TLB at 0x%p\n", hpa);
 174	DBG_INIT("IOC_IBASE    : 0x%Lx\n", READ_REG64(hpa+IOC_IBASE));
 175	DBG_INIT("IOC_IMASK    : 0x%Lx\n", READ_REG64(hpa+IOC_IMASK));
 176	DBG_INIT("IOC_TCNFG    : 0x%Lx\n", READ_REG64(hpa+IOC_TCNFG));
 177	DBG_INIT("IOC_PDIR_BASE: 0x%Lx\n", READ_REG64(hpa+IOC_PDIR_BASE));
 178	DBG_INIT("\n");
 179}
 180#else
 181#define sba_dump_ranges(x)
 182#define sba_dump_tlb(x)
 183#endif	/* DEBUG_SBA_INIT */
 184
 185
 186#ifdef ASSERT_PDIR_SANITY
 187
 188/**
 189 * sba_dump_pdir_entry - debugging only - print one IOMMU PDIR entry
 190 * @ioc: IO MMU structure which owns the pdir we are interested in.
 191 * @msg: text to print ont the output line.
 192 * @pide: pdir index.
 193 *
 194 * Print one entry of the IO MMU PDIR in human readable form.
 195 */
 196static void
 197sba_dump_pdir_entry(struct ioc *ioc, char *msg, uint pide)
 198{
 199	/* start printing from lowest pde in rval */
 200	u64 *ptr = &(ioc->pdir_base[pide & (~0U * BITS_PER_LONG)]);
 201	unsigned long *rptr = (unsigned long *) &(ioc->res_map[(pide >>3) & ~(sizeof(unsigned long) - 1)]);
 202	uint rcnt;
 203
 204	printk(KERN_DEBUG "SBA: %s rp %p bit %d rval 0x%lx\n",
 205		 msg,
 206		 rptr, pide & (BITS_PER_LONG - 1), *rptr);
 207
 208	rcnt = 0;
 209	while (rcnt < BITS_PER_LONG) {
 210		printk(KERN_DEBUG "%s %2d %p %016Lx\n",
 211			(rcnt == (pide & (BITS_PER_LONG - 1)))
 212				? "    -->" : "       ",
 213			rcnt, ptr, *ptr );
 214		rcnt++;
 215		ptr++;
 216	}
 217	printk(KERN_DEBUG "%s", msg);
 218}
 219
 220
 221/**
 222 * sba_check_pdir - debugging only - consistency checker
 223 * @ioc: IO MMU structure which owns the pdir we are interested in.
 224 * @msg: text to print ont the output line.
 225 *
 226 * Verify the resource map and pdir state is consistent
 227 */
 228static int
 229sba_check_pdir(struct ioc *ioc, char *msg)
 230{
 231	u32 *rptr_end = (u32 *) &(ioc->res_map[ioc->res_size]);
 232	u32 *rptr = (u32 *) ioc->res_map;	/* resource map ptr */
 233	u64 *pptr = ioc->pdir_base;	/* pdir ptr */
 234	uint pide = 0;
 235
 236	while (rptr < rptr_end) {
 237		u32 rval = *rptr;
 238		int rcnt = 32;	/* number of bits we might check */
 239
 240		while (rcnt) {
 241			/* Get last byte and highest bit from that */
 242			u32 pde = ((u32) (((char *)pptr)[7])) << 24;
 243			if ((rval ^ pde) & 0x80000000)
 244			{
 245				/*
 246				** BUMMER!  -- res_map != pdir --
 247				** Dump rval and matching pdir entries
 248				*/
 249				sba_dump_pdir_entry(ioc, msg, pide);
 250				return(1);
 251			}
 252			rcnt--;
 253			rval <<= 1;	/* try the next bit */
 254			pptr++;
 255			pide++;
 256		}
 257		rptr++;	/* look at next word of res_map */
 258	}
 259	/* It'd be nice if we always got here :^) */
 260	return 0;
 261}
 262
 263
 264/**
 265 * sba_dump_sg - debugging only - print Scatter-Gather list
 266 * @ioc: IO MMU structure which owns the pdir we are interested in.
 267 * @startsg: head of the SG list
 268 * @nents: number of entries in SG list
 269 *
 270 * print the SG list so we can verify it's correct by hand.
 271 */
 272static void
 273sba_dump_sg( struct ioc *ioc, struct scatterlist *startsg, int nents)
 274{
 275	while (nents-- > 0) {
 276		printk(KERN_DEBUG " %d : %08lx/%05x %p/%05x\n",
 277				nents,
 278				(unsigned long) sg_dma_address(startsg),
 279				sg_dma_len(startsg),
 280				sg_virt(startsg), startsg->length);
 281		startsg++;
 282	}
 283}
 284
 285#endif /* ASSERT_PDIR_SANITY */
 286
 287
 288
 289
 290/**************************************************************
 291*
 292*   I/O Pdir Resource Management
 293*
 294*   Bits set in the resource map are in use.
 295*   Each bit can represent a number of pages.
 296*   LSbs represent lower addresses (IOVA's).
 297*
 298***************************************************************/
 299#define PAGES_PER_RANGE 1	/* could increase this to 4 or 8 if needed */
 300
 301/* Convert from IOVP to IOVA and vice versa. */
 302
 303#ifdef ZX1_SUPPORT
 304/* Pluto (aka ZX1) boxes need to set or clear the ibase bits appropriately */
 305#define SBA_IOVA(ioc,iovp,offset,hint_reg) ((ioc->ibase) | (iovp) | (offset))
 306#define SBA_IOVP(ioc,iova) ((iova) & (ioc)->iovp_mask)
 307#else
 308/* only support Astro and ancestors. Saves a few cycles in key places */
 309#define SBA_IOVA(ioc,iovp,offset,hint_reg) ((iovp) | (offset))
 310#define SBA_IOVP(ioc,iova) (iova)
 311#endif
 312
 313#define PDIR_INDEX(iovp)   ((iovp)>>IOVP_SHIFT)
 314
 315#define RESMAP_MASK(n)    (~0UL << (BITS_PER_LONG - (n)))
 316#define RESMAP_IDX_MASK   (sizeof(unsigned long) - 1)
 317
 318static unsigned long ptr_to_pide(struct ioc *ioc, unsigned long *res_ptr,
 319				 unsigned int bitshiftcnt)
 320{
 321	return (((unsigned long)res_ptr - (unsigned long)ioc->res_map) << 3)
 322		+ bitshiftcnt;
 323}
 324
 325/**
 326 * sba_search_bitmap - find free space in IO PDIR resource bitmap
 327 * @ioc: IO MMU structure which owns the pdir we are interested in.
 328 * @bits_wanted: number of entries we need.
 329 *
 330 * Find consecutive free bits in resource bitmap.
 331 * Each bit represents one entry in the IO Pdir.
 332 * Cool perf optimization: search for log2(size) bits at a time.
 333 */
 334static SBA_INLINE unsigned long
 335sba_search_bitmap(struct ioc *ioc, struct device *dev,
 336		  unsigned long bits_wanted)
 337{
 338	unsigned long *res_ptr = ioc->res_hint;
 339	unsigned long *res_end = (unsigned long *) &(ioc->res_map[ioc->res_size]);
 340	unsigned long pide = ~0UL, tpide;
 341	unsigned long boundary_size;
 342	unsigned long shift;
 343	int ret;
 344
 345	boundary_size = ALIGN((unsigned long long)dma_get_seg_boundary(dev) + 1,
 346			      1ULL << IOVP_SHIFT) >> IOVP_SHIFT;
 347
 348#if defined(ZX1_SUPPORT)
 349	BUG_ON(ioc->ibase & ~IOVP_MASK);
 350	shift = ioc->ibase >> IOVP_SHIFT;
 351#else
 352	shift = 0;
 353#endif
 354
 355	if (bits_wanted > (BITS_PER_LONG/2)) {
 356		/* Search word at a time - no mask needed */
 357		for(; res_ptr < res_end; ++res_ptr) {
 358			tpide = ptr_to_pide(ioc, res_ptr, 0);
 359			ret = iommu_is_span_boundary(tpide, bits_wanted,
 360						     shift,
 361						     boundary_size);
 362			if ((*res_ptr == 0) && !ret) {
 363				*res_ptr = RESMAP_MASK(bits_wanted);
 364				pide = tpide;
 365				break;
 366			}
 367		}
 368		/* point to the next word on next pass */
 369		res_ptr++;
 370		ioc->res_bitshift = 0;
 371	} else {
 372		/*
 373		** Search the resource bit map on well-aligned values.
 374		** "o" is the alignment.
 375		** We need the alignment to invalidate I/O TLB using
 376		** SBA HW features in the unmap path.
 377		*/
 378		unsigned long o = 1 << get_order(bits_wanted << PAGE_SHIFT);
 379		uint bitshiftcnt = ALIGN(ioc->res_bitshift, o);
 380		unsigned long mask;
 381
 382		if (bitshiftcnt >= BITS_PER_LONG) {
 383			bitshiftcnt = 0;
 384			res_ptr++;
 385		}
 386		mask = RESMAP_MASK(bits_wanted) >> bitshiftcnt;
 387
 388		DBG_RES("%s() o %ld %p", __func__, o, res_ptr);
 389		while(res_ptr < res_end)
 390		{ 
 391			DBG_RES("    %p %lx %lx\n", res_ptr, mask, *res_ptr);
 392			WARN_ON(mask == 0);
 393			tpide = ptr_to_pide(ioc, res_ptr, bitshiftcnt);
 394			ret = iommu_is_span_boundary(tpide, bits_wanted,
 395						     shift,
 396						     boundary_size);
 397			if ((((*res_ptr) & mask) == 0) && !ret) {
 398				*res_ptr |= mask;     /* mark resources busy! */
 399				pide = tpide;
 400				break;
 401			}
 402			mask >>= o;
 403			bitshiftcnt += o;
 404			if (mask == 0) {
 405				mask = RESMAP_MASK(bits_wanted);
 406				bitshiftcnt=0;
 407				res_ptr++;
 408			}
 409		}
 410		/* look in the same word on the next pass */
 411		ioc->res_bitshift = bitshiftcnt + bits_wanted;
 412	}
 413
 414	/* wrapped ? */
 415	if (res_end <= res_ptr) {
 416		ioc->res_hint = (unsigned long *) ioc->res_map;
 417		ioc->res_bitshift = 0;
 418	} else {
 419		ioc->res_hint = res_ptr;
 420	}
 421	return (pide);
 422}
 423
 424
 425/**
 426 * sba_alloc_range - find free bits and mark them in IO PDIR resource bitmap
 427 * @ioc: IO MMU structure which owns the pdir we are interested in.
 428 * @size: number of bytes to create a mapping for
 429 *
 430 * Given a size, find consecutive unmarked and then mark those bits in the
 431 * resource bit map.
 432 */
 433static int
 434sba_alloc_range(struct ioc *ioc, struct device *dev, size_t size)
 435{
 436	unsigned int pages_needed = size >> IOVP_SHIFT;
 437#ifdef SBA_COLLECT_STATS
 438	unsigned long cr_start = mfctl(16);
 439#endif
 440	unsigned long pide;
 441
 442	pide = sba_search_bitmap(ioc, dev, pages_needed);
 443	if (pide >= (ioc->res_size << 3)) {
 444		pide = sba_search_bitmap(ioc, dev, pages_needed);
 445		if (pide >= (ioc->res_size << 3))
 446			panic("%s: I/O MMU @ %p is out of mapping resources\n",
 447			      __FILE__, ioc->ioc_hpa);
 448	}
 449
 450#ifdef ASSERT_PDIR_SANITY
 451	/* verify the first enable bit is clear */
 452	if(0x00 != ((u8 *) ioc->pdir_base)[pide*sizeof(u64) + 7]) {
 453		sba_dump_pdir_entry(ioc, "sba_search_bitmap() botched it?", pide);
 454	}
 455#endif
 456
 457	DBG_RES("%s(%x) %d -> %lx hint %x/%x\n",
 458		__func__, size, pages_needed, pide,
 459		(uint) ((unsigned long) ioc->res_hint - (unsigned long) ioc->res_map),
 460		ioc->res_bitshift );
 461
 462#ifdef SBA_COLLECT_STATS
 463	{
 464		unsigned long cr_end = mfctl(16);
 465		unsigned long tmp = cr_end - cr_start;
 466		/* check for roll over */
 467		cr_start = (cr_end < cr_start) ?  -(tmp) : (tmp);
 468	}
 469	ioc->avg_search[ioc->avg_idx++] = cr_start;
 470	ioc->avg_idx &= SBA_SEARCH_SAMPLE - 1;
 471
 472	ioc->used_pages += pages_needed;
 473#endif
 474
 475	return (pide);
 476}
 477
 478
 479/**
 480 * sba_free_range - unmark bits in IO PDIR resource bitmap
 481 * @ioc: IO MMU structure which owns the pdir we are interested in.
 482 * @iova: IO virtual address which was previously allocated.
 483 * @size: number of bytes to create a mapping for
 484 *
 485 * clear bits in the ioc's resource map
 486 */
 487static SBA_INLINE void
 488sba_free_range(struct ioc *ioc, dma_addr_t iova, size_t size)
 489{
 490	unsigned long iovp = SBA_IOVP(ioc, iova);
 491	unsigned int pide = PDIR_INDEX(iovp);
 492	unsigned int ridx = pide >> 3;	/* convert bit to byte address */
 493	unsigned long *res_ptr = (unsigned long *) &((ioc)->res_map[ridx & ~RESMAP_IDX_MASK]);
 494
 495	int bits_not_wanted = size >> IOVP_SHIFT;
 496
 497	/* 3-bits "bit" address plus 2 (or 3) bits for "byte" == bit in word */
 498	unsigned long m = RESMAP_MASK(bits_not_wanted) >> (pide & (BITS_PER_LONG - 1));
 499
 500	DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n",
 501		__func__, (uint) iova, size,
 502		bits_not_wanted, m, pide, res_ptr, *res_ptr);
 503
 504#ifdef SBA_COLLECT_STATS
 505	ioc->used_pages -= bits_not_wanted;
 506#endif
 507
 508	*res_ptr &= ~m;
 509}
 510
 511
 512/**************************************************************
 513*
 514*   "Dynamic DMA Mapping" support (aka "Coherent I/O")
 515*
 516***************************************************************/
 517
 518#ifdef SBA_HINT_SUPPORT
 519#define SBA_DMA_HINT(ioc, val) ((val) << (ioc)->hint_shift_pdir)
 520#endif
 521
 522typedef unsigned long space_t;
 523#define KERNEL_SPACE 0
 524
 525/**
 526 * sba_io_pdir_entry - fill in one IO PDIR entry
 527 * @pdir_ptr:  pointer to IO PDIR entry
 528 * @sid: process Space ID - currently only support KERNEL_SPACE
 529 * @vba: Virtual CPU address of buffer to map
 530 * @hint: DMA hint set to use for this mapping
 531 *
 532 * SBA Mapping Routine
 533 *
 534 * Given a virtual address (vba, arg2) and space id, (sid, arg1)
 535 * sba_io_pdir_entry() loads the I/O PDIR entry pointed to by
 536 * pdir_ptr (arg0). 
 537 * Using the bass-ackwards HP bit numbering, Each IO Pdir entry
 538 * for Astro/Ike looks like:
 539 *
 540 *
 541 *  0                    19                                 51   55       63
 542 * +-+---------------------+----------------------------------+----+--------+
 543 * |V|        U            |            PPN[43:12]            | U  |   VI   |
 544 * +-+---------------------+----------------------------------+----+--------+
 545 *
 546 * Pluto is basically identical, supports fewer physical address bits:
 547 *
 548 *  0                       23                              51   55       63
 549 * +-+------------------------+-------------------------------+----+--------+
 550 * |V|        U               |         PPN[39:12]            | U  |   VI   |
 551 * +-+------------------------+-------------------------------+----+--------+
 552 *
 553 *  V  == Valid Bit  (Most Significant Bit is bit 0)
 554 *  U  == Unused
 555 * PPN == Physical Page Number
 556 * VI  == Virtual Index (aka Coherent Index)
 557 *
 558 * LPA instruction output is put into PPN field.
 559 * LCI (Load Coherence Index) instruction provides the "VI" bits.
 560 *
 561 * We pre-swap the bytes since PCX-W is Big Endian and the
 562 * IOMMU uses little endian for the pdir.
 563 */
 564
 565static void SBA_INLINE
 566sba_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba,
 567		  unsigned long hint)
 568{
 569	u64 pa; /* physical address */
 570	register unsigned ci; /* coherent index */
 571
 572	pa = lpa(vba);
 573	pa &= IOVP_MASK;
 574
 575	asm("lci 0(%1), %0" : "=r" (ci) : "r" (vba));
 576	pa |= (ci >> PAGE_SHIFT) & 0xff;  /* move CI (8 bits) into lowest byte */
 
 577
 578	pa |= SBA_PDIR_VALID_BIT;	/* set "valid" bit */
 579	*pdir_ptr = cpu_to_le64(pa);	/* swap and store into I/O Pdir */
 580
 581	/*
 582	 * If the PDC_MODEL capabilities has Non-coherent IO-PDIR bit set
 583	 * (bit #61, big endian), we have to flush and sync every time
 584	 * IO-PDIR is changed in Ike/Astro.
 585	 */
 586	asm_io_fdc(pdir_ptr);
 
 587}
 588
 589
 590/**
 591 * sba_mark_invalid - invalidate one or more IO PDIR entries
 592 * @ioc: IO MMU structure which owns the pdir we are interested in.
 593 * @iova:  IO Virtual Address mapped earlier
 594 * @byte_cnt:  number of bytes this mapping covers.
 595 *
 596 * Marking the IO PDIR entry(ies) as Invalid and invalidate
 597 * corresponding IO TLB entry. The Ike PCOM (Purge Command Register)
 598 * is to purge stale entries in the IO TLB when unmapping entries.
 599 *
 600 * The PCOM register supports purging of multiple pages, with a minium
 601 * of 1 page and a maximum of 2GB. Hardware requires the address be
 602 * aligned to the size of the range being purged. The size of the range
 603 * must be a power of 2. The "Cool perf optimization" in the
 604 * allocation routine helps keep that true.
 605 */
 606static SBA_INLINE void
 607sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
 608{
 609	u32 iovp = (u32) SBA_IOVP(ioc,iova);
 610	u64 *pdir_ptr = &ioc->pdir_base[PDIR_INDEX(iovp)];
 611
 612#ifdef ASSERT_PDIR_SANITY
 613	/* Assert first pdir entry is set.
 614	**
 615	** Even though this is a big-endian machine, the entries
 616	** in the iopdir are little endian. That's why we look at
 617	** the byte at +7 instead of at +0.
 618	*/
 619	if (0x80 != (((u8 *) pdir_ptr)[7])) {
 620		sba_dump_pdir_entry(ioc,"sba_mark_invalid()", PDIR_INDEX(iovp));
 621	}
 622#endif
 623
 624	if (byte_cnt > IOVP_SIZE)
 625	{
 626#if 0
 627		unsigned long entries_per_cacheline = ioc_needs_fdc ?
 628				L1_CACHE_ALIGN(((unsigned long) pdir_ptr))
 629					- (unsigned long) pdir_ptr;
 630				: 262144;
 631#endif
 632
 633		/* set "size" field for PCOM */
 634		iovp |= get_order(byte_cnt) + PAGE_SHIFT;
 635
 636		do {
 637			/* clear I/O Pdir entry "valid" bit first */
 638			((u8 *) pdir_ptr)[7] = 0;
 639			asm_io_fdc(pdir_ptr);
 640			if (ioc_needs_fdc) {
 
 641#if 0
 642				entries_per_cacheline = L1_CACHE_SHIFT - 3;
 643#endif
 644			}
 645			pdir_ptr++;
 646			byte_cnt -= IOVP_SIZE;
 647		} while (byte_cnt > IOVP_SIZE);
 648	} else
 649		iovp |= IOVP_SHIFT;     /* set "size" field for PCOM */
 650
 651	/*
 652	** clear I/O PDIR entry "valid" bit.
 653	** We have to R/M/W the cacheline regardless how much of the
 654	** pdir entry that we clobber.
 655	** The rest of the entry would be useful for debugging if we
 656	** could dump core on HPMC.
 657	*/
 658	((u8 *) pdir_ptr)[7] = 0;
 659	asm_io_fdc(pdir_ptr);
 
 660
 661	WRITE_REG( SBA_IOVA(ioc, iovp, 0, 0), ioc->ioc_hpa+IOC_PCOM);
 662}
 663
 664/**
 665 * sba_dma_supported - PCI driver can query DMA support
 666 * @dev: instance of PCI owned by the driver that's asking
 667 * @mask:  number of address bits this PCI device can handle
 668 *
 669 * See Documentation/core-api/dma-api-howto.rst
 670 */
 671static int sba_dma_supported( struct device *dev, u64 mask)
 672{
 673	struct ioc *ioc;
 674
 675	if (dev == NULL) {
 676		printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n");
 677		BUG();
 678		return(0);
 679	}
 680
 681	ioc = GET_IOC(dev);
 682	if (!ioc)
 
 
 
 
 683		return 0;
 684
 
 
 685	/*
 686	 * check if mask is >= than the current max IO Virt Address
 687	 * The max IO Virt address will *always* < 30 bits.
 688	 */
 689	return((int)(mask >= (ioc->ibase - 1 +
 690			(ioc->pdir_size / sizeof(u64) * IOVP_SIZE) )));
 691}
 692
 693
 694/**
 695 * sba_map_single - map one buffer and return IOVA for DMA
 696 * @dev: instance of PCI owned by the driver that's asking.
 697 * @addr:  driver buffer to map.
 698 * @size:  number of bytes to map in driver buffer.
 699 * @direction:  R/W or both.
 700 *
 701 * See Documentation/core-api/dma-api-howto.rst
 702 */
 703static dma_addr_t
 704sba_map_single(struct device *dev, void *addr, size_t size,
 705	       enum dma_data_direction direction)
 706{
 707	struct ioc *ioc;
 708	unsigned long flags; 
 709	dma_addr_t iovp;
 710	dma_addr_t offset;
 711	u64 *pdir_start;
 712	int pide;
 713
 714	ioc = GET_IOC(dev);
 715	if (!ioc)
 716		return DMA_MAPPING_ERROR;
 717
 718	/* save offset bits */
 719	offset = ((dma_addr_t) (long) addr) & ~IOVP_MASK;
 720
 721	/* round up to nearest IOVP_SIZE */
 722	size = (size + offset + ~IOVP_MASK) & IOVP_MASK;
 723
 724	spin_lock_irqsave(&ioc->res_lock, flags);
 725#ifdef ASSERT_PDIR_SANITY
 726	sba_check_pdir(ioc,"Check before sba_map_single()");
 727#endif
 728
 729#ifdef SBA_COLLECT_STATS
 730	ioc->msingle_calls++;
 731	ioc->msingle_pages += size >> IOVP_SHIFT;
 732#endif
 733	pide = sba_alloc_range(ioc, dev, size);
 734	iovp = (dma_addr_t) pide << IOVP_SHIFT;
 735
 736	DBG_RUN("%s() 0x%p -> 0x%lx\n",
 737		__func__, addr, (long) iovp | offset);
 738
 739	pdir_start = &(ioc->pdir_base[pide]);
 740
 741	while (size > 0) {
 742		sba_io_pdir_entry(pdir_start, KERNEL_SPACE, (unsigned long) addr, 0);
 743
 744		DBG_RUN("	pdir 0x%p %02x%02x%02x%02x%02x%02x%02x%02x\n",
 745			pdir_start,
 746			(u8) (((u8 *) pdir_start)[7]),
 747			(u8) (((u8 *) pdir_start)[6]),
 748			(u8) (((u8 *) pdir_start)[5]),
 749			(u8) (((u8 *) pdir_start)[4]),
 750			(u8) (((u8 *) pdir_start)[3]),
 751			(u8) (((u8 *) pdir_start)[2]),
 752			(u8) (((u8 *) pdir_start)[1]),
 753			(u8) (((u8 *) pdir_start)[0])
 754			);
 755
 756		addr += IOVP_SIZE;
 757		size -= IOVP_SIZE;
 758		pdir_start++;
 759	}
 760
 761	/* force FDC ops in io_pdir_entry() to be visible to IOMMU */
 762	asm_io_sync();
 
 763
 764#ifdef ASSERT_PDIR_SANITY
 765	sba_check_pdir(ioc,"Check after sba_map_single()");
 766#endif
 767	spin_unlock_irqrestore(&ioc->res_lock, flags);
 768
 769	/* form complete address */
 770	return SBA_IOVA(ioc, iovp, offset, DEFAULT_DMA_HINT_REG);
 771}
 772
 773
 774static dma_addr_t
 775sba_map_page(struct device *dev, struct page *page, unsigned long offset,
 776		size_t size, enum dma_data_direction direction,
 777		unsigned long attrs)
 778{
 779	return sba_map_single(dev, page_address(page) + offset, size,
 780			direction);
 781}
 782
 783
 784/**
 785 * sba_unmap_page - unmap one IOVA and free resources
 786 * @dev: instance of PCI owned by the driver that's asking.
 787 * @iova:  IOVA of driver buffer previously mapped.
 788 * @size:  number of bytes mapped in driver buffer.
 789 * @direction:  R/W or both.
 790 *
 791 * See Documentation/core-api/dma-api-howto.rst
 792 */
 793static void
 794sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size,
 795		enum dma_data_direction direction, unsigned long attrs)
 796{
 797	struct ioc *ioc;
 798#if DELAYED_RESOURCE_CNT > 0
 799	struct sba_dma_pair *d;
 800#endif
 801	unsigned long flags; 
 802	dma_addr_t offset;
 803
 804	DBG_RUN("%s() iovp 0x%lx/%x\n", __func__, (long) iova, size);
 805
 806	ioc = GET_IOC(dev);
 807	if (!ioc) {
 808		WARN_ON(!ioc);
 809		return;
 810	}
 811	offset = iova & ~IOVP_MASK;
 812	iova ^= offset;        /* clear offset bits */
 813	size += offset;
 814	size = ALIGN(size, IOVP_SIZE);
 815
 816	spin_lock_irqsave(&ioc->res_lock, flags);
 817
 818#ifdef SBA_COLLECT_STATS
 819	ioc->usingle_calls++;
 820	ioc->usingle_pages += size >> IOVP_SHIFT;
 821#endif
 822
 823	sba_mark_invalid(ioc, iova, size);
 824
 825#if DELAYED_RESOURCE_CNT > 0
 826	/* Delaying when we re-use a IO Pdir entry reduces the number
 827	 * of MMIO reads needed to flush writes to the PCOM register.
 828	 */
 829	d = &(ioc->saved[ioc->saved_cnt]);
 830	d->iova = iova;
 831	d->size = size;
 832	if (++(ioc->saved_cnt) >= DELAYED_RESOURCE_CNT) {
 833		int cnt = ioc->saved_cnt;
 834		while (cnt--) {
 835			sba_free_range(ioc, d->iova, d->size);
 836			d--;
 837		}
 838		ioc->saved_cnt = 0;
 839
 840		READ_REG(ioc->ioc_hpa+IOC_PCOM);	/* flush purges */
 841	}
 842#else /* DELAYED_RESOURCE_CNT == 0 */
 843	sba_free_range(ioc, iova, size);
 844
 845	/* If fdc's were issued, force fdc's to be visible now */
 846	asm_io_sync();
 
 847
 848	READ_REG(ioc->ioc_hpa+IOC_PCOM);	/* flush purges */
 849#endif /* DELAYED_RESOURCE_CNT == 0 */
 850
 851	spin_unlock_irqrestore(&ioc->res_lock, flags);
 852
 853	/* XXX REVISIT for 2.5 Linux - need syncdma for zero-copy support.
 854	** For Astro based systems this isn't a big deal WRT performance.
 855	** As long as 2.4 kernels copyin/copyout data from/to userspace,
 856	** we don't need the syncdma. The issue here is I/O MMU cachelines
 857	** are *not* coherent in all cases.  May be hwrev dependent.
 858	** Need to investigate more.
 859	asm volatile("syncdma");	
 860	*/
 861}
 862
 863
 864/**
 865 * sba_alloc - allocate/map shared mem for DMA
 866 * @hwdev: instance of PCI owned by the driver that's asking.
 867 * @size:  number of bytes mapped in driver buffer.
 868 * @dma_handle:  IOVA of new buffer.
 869 *
 870 * See Documentation/core-api/dma-api-howto.rst
 871 */
 872static void *sba_alloc(struct device *hwdev, size_t size, dma_addr_t *dma_handle,
 873		gfp_t gfp, unsigned long attrs)
 874{
 875	void *ret;
 876
 877	if (!hwdev) {
 878		/* only support PCI */
 879		*dma_handle = 0;
 880		return NULL;
 881	}
 882
 883        ret = (void *) __get_free_pages(gfp, get_order(size));
 884
 885	if (ret) {
 886		memset(ret, 0, size);
 887		*dma_handle = sba_map_single(hwdev, ret, size, 0);
 888	}
 889
 890	return ret;
 891}
 892
 893
 894/**
 895 * sba_free - free/unmap shared mem for DMA
 896 * @hwdev: instance of PCI owned by the driver that's asking.
 897 * @size:  number of bytes mapped in driver buffer.
 898 * @vaddr:  virtual address IOVA of "consistent" buffer.
 899 * @dma_handler:  IO virtual address of "consistent" buffer.
 900 *
 901 * See Documentation/core-api/dma-api-howto.rst
 902 */
 903static void
 904sba_free(struct device *hwdev, size_t size, void *vaddr,
 905		    dma_addr_t dma_handle, unsigned long attrs)
 906{
 907	sba_unmap_page(hwdev, dma_handle, size, 0, 0);
 908	free_pages((unsigned long) vaddr, get_order(size));
 909}
 910
 911
 912/*
 913** Since 0 is a valid pdir_base index value, can't use that
 914** to determine if a value is valid or not. Use a flag to indicate
 915** the SG list entry contains a valid pdir index.
 916*/
 917#define PIDE_FLAG 0x80000000UL
 918
 919#ifdef SBA_COLLECT_STATS
 920#define IOMMU_MAP_STATS
 921#endif
 922#include "iommu-helpers.h"
 923
 924#ifdef DEBUG_LARGE_SG_ENTRIES
 925int dump_run_sg = 0;
 926#endif
 927
 928
 929/**
 930 * sba_map_sg - map Scatter/Gather list
 931 * @dev: instance of PCI owned by the driver that's asking.
 932 * @sglist:  array of buffer/length pairs
 933 * @nents:  number of entries in list
 934 * @direction:  R/W or both.
 935 *
 936 * See Documentation/core-api/dma-api-howto.rst
 937 */
 938static int
 939sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
 940	   enum dma_data_direction direction, unsigned long attrs)
 941{
 942	struct ioc *ioc;
 943	int coalesced, filled = 0;
 944	unsigned long flags;
 945
 946	DBG_RUN_SG("%s() START %d entries\n", __func__, nents);
 947
 948	ioc = GET_IOC(dev);
 949	if (!ioc)
 950		return 0;
 951
 952	/* Fast path single entry scatterlists. */
 953	if (nents == 1) {
 954		sg_dma_address(sglist) = sba_map_single(dev, sg_virt(sglist),
 
 955						sglist->length, direction);
 956		sg_dma_len(sglist)     = sglist->length;
 957		return 1;
 958	}
 959
 960	spin_lock_irqsave(&ioc->res_lock, flags);
 961
 962#ifdef ASSERT_PDIR_SANITY
 963	if (sba_check_pdir(ioc,"Check before sba_map_sg()"))
 964	{
 965		sba_dump_sg(ioc, sglist, nents);
 966		panic("Check before sba_map_sg()");
 967	}
 968#endif
 969
 970#ifdef SBA_COLLECT_STATS
 971	ioc->msg_calls++;
 972#endif
 973
 974	/*
 975	** First coalesce the chunks and allocate I/O pdir space
 976	**
 977	** If this is one DMA stream, we can properly map using the
 978	** correct virtual address associated with each DMA page.
 979	** w/o this association, we wouldn't have coherent DMA!
 980	** Access to the virtual address is what forces a two pass algorithm.
 981	*/
 982	coalesced = iommu_coalesce_chunks(ioc, dev, sglist, nents, sba_alloc_range);
 983
 984	/*
 985	** Program the I/O Pdir
 986	**
 987	** map the virtual addresses to the I/O Pdir
 988	** o dma_address will contain the pdir index
 989	** o dma_len will contain the number of bytes to map 
 990	** o address contains the virtual address.
 991	*/
 992	filled = iommu_fill_pdir(ioc, sglist, nents, 0, sba_io_pdir_entry);
 993
 994	/* force FDC ops in io_pdir_entry() to be visible to IOMMU */
 995	asm_io_sync();
 
 996
 997#ifdef ASSERT_PDIR_SANITY
 998	if (sba_check_pdir(ioc,"Check after sba_map_sg()"))
 999	{
1000		sba_dump_sg(ioc, sglist, nents);
1001		panic("Check after sba_map_sg()\n");
1002	}
1003#endif
1004
1005	spin_unlock_irqrestore(&ioc->res_lock, flags);
1006
1007	DBG_RUN_SG("%s() DONE %d mappings\n", __func__, filled);
1008
1009	return filled;
1010}
1011
1012
1013/**
1014 * sba_unmap_sg - unmap Scatter/Gather list
1015 * @dev: instance of PCI owned by the driver that's asking.
1016 * @sglist:  array of buffer/length pairs
1017 * @nents:  number of entries in list
1018 * @direction:  R/W or both.
1019 *
1020 * See Documentation/core-api/dma-api-howto.rst
1021 */
1022static void 
1023sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents,
1024	     enum dma_data_direction direction, unsigned long attrs)
1025{
1026	struct ioc *ioc;
1027#ifdef ASSERT_PDIR_SANITY
1028	unsigned long flags;
1029#endif
1030
1031	DBG_RUN_SG("%s() START %d entries,  %p,%x\n",
1032		__func__, nents, sg_virt(sglist), sglist->length);
1033
1034	ioc = GET_IOC(dev);
1035	if (!ioc) {
1036		WARN_ON(!ioc);
1037		return;
1038	}
1039
1040#ifdef SBA_COLLECT_STATS
1041	ioc->usg_calls++;
1042#endif
1043
1044#ifdef ASSERT_PDIR_SANITY
1045	spin_lock_irqsave(&ioc->res_lock, flags);
1046	sba_check_pdir(ioc,"Check before sba_unmap_sg()");
1047	spin_unlock_irqrestore(&ioc->res_lock, flags);
1048#endif
1049
1050	while (sg_dma_len(sglist) && nents--) {
1051
1052		sba_unmap_page(dev, sg_dma_address(sglist), sg_dma_len(sglist),
1053				direction, 0);
1054#ifdef SBA_COLLECT_STATS
1055		ioc->usg_pages += ((sg_dma_address(sglist) & ~IOVP_MASK) + sg_dma_len(sglist) + IOVP_SIZE - 1) >> PAGE_SHIFT;
1056		ioc->usingle_calls--;	/* kluge since call is unmap_sg() */
1057#endif
1058		++sglist;
1059	}
1060
1061	DBG_RUN_SG("%s() DONE (nents %d)\n", __func__,  nents);
1062
1063#ifdef ASSERT_PDIR_SANITY
1064	spin_lock_irqsave(&ioc->res_lock, flags);
1065	sba_check_pdir(ioc,"Check after sba_unmap_sg()");
1066	spin_unlock_irqrestore(&ioc->res_lock, flags);
1067#endif
1068
1069}
1070
1071static const struct dma_map_ops sba_ops = {
1072	.dma_supported =	sba_dma_supported,
1073	.alloc =		sba_alloc,
1074	.free =			sba_free,
1075	.map_page =		sba_map_page,
1076	.unmap_page =		sba_unmap_page,
 
1077	.map_sg =		sba_map_sg,
1078	.unmap_sg =		sba_unmap_sg,
1079	.get_sgtable =		dma_common_get_sgtable,
 
 
 
1080};
1081
1082
1083/**************************************************************************
1084**
1085**   SBA PAT PDC support
1086**
1087**   o call pdc_pat_cell_module()
1088**   o store ranges in PCI "resource" structures
1089**
1090**************************************************************************/
1091
1092static void
1093sba_get_pat_resources(struct sba_device *sba_dev)
1094{
1095#if 0
1096/*
1097** TODO/REVISIT/FIXME: support for directed ranges requires calls to
1098**      PAT PDC to program the SBA/LBA directed range registers...this
1099**      burden may fall on the LBA code since it directly supports the
1100**      PCI subsystem. It's not clear yet. - ggg
1101*/
1102PAT_MOD(mod)->mod_info.mod_pages   = PAT_GET_MOD_PAGES(temp);
1103	FIXME : ???
1104PAT_MOD(mod)->mod_info.dvi         = PAT_GET_DVI(temp);
1105	Tells where the dvi bits are located in the address.
1106PAT_MOD(mod)->mod_info.ioc         = PAT_GET_IOC(temp);
1107	FIXME : ???
1108#endif
1109}
1110
1111
1112/**************************************************************
1113*
1114*   Initialization and claim
1115*
1116***************************************************************/
1117#define PIRANHA_ADDR_MASK	0x00160000UL /* bit 17,18,20 */
1118#define PIRANHA_ADDR_VAL	0x00060000UL /* bit 17,18 on */
1119static void *
1120sba_alloc_pdir(unsigned int pdir_size)
1121{
1122        unsigned long pdir_base;
1123	unsigned long pdir_order = get_order(pdir_size);
1124
1125	pdir_base = __get_free_pages(GFP_KERNEL, pdir_order);
1126	if (NULL == (void *) pdir_base)	{
1127		panic("%s() could not allocate I/O Page Table\n",
1128			__func__);
1129	}
1130
1131	/* If this is not PA8700 (PCX-W2)
1132	**	OR newer than ver 2.2
1133	**	OR in a system that doesn't need VINDEX bits from SBA,
1134	**
1135	** then we aren't exposed to the HW bug.
1136	*/
1137	if ( ((boot_cpu_data.pdc.cpuid >> 5) & 0x7f) != 0x13
1138			|| (boot_cpu_data.pdc.versions > 0x202)
1139			|| (boot_cpu_data.pdc.capabilities & 0x08L) )
1140		return (void *) pdir_base;
1141
1142	/*
1143	 * PA8700 (PCX-W2, aka piranha) silent data corruption fix
1144	 *
1145	 * An interaction between PA8700 CPU (Ver 2.2 or older) and
1146	 * Ike/Astro can cause silent data corruption. This is only
1147	 * a problem if the I/O PDIR is located in memory such that
1148	 * (little-endian)  bits 17 and 18 are on and bit 20 is off.
1149	 *
1150	 * Since the max IO Pdir size is 2MB, by cleverly allocating the
1151	 * right physical address, we can either avoid (IOPDIR <= 1MB)
1152	 * or minimize (2MB IO Pdir) the problem if we restrict the
1153	 * IO Pdir to a maximum size of 2MB-128K (1902K).
1154	 *
1155	 * Because we always allocate 2^N sized IO pdirs, either of the
1156	 * "bad" regions will be the last 128K if at all. That's easy
1157	 * to test for.
1158	 * 
1159	 */
1160	if (pdir_order <= (19-12)) {
1161		if (((virt_to_phys(pdir_base)+pdir_size-1) & PIRANHA_ADDR_MASK) == PIRANHA_ADDR_VAL) {
1162			/* allocate a new one on 512k alignment */
1163			unsigned long new_pdir = __get_free_pages(GFP_KERNEL, (19-12));
1164			/* release original */
1165			free_pages(pdir_base, pdir_order);
1166
1167			pdir_base = new_pdir;
1168
1169			/* release excess */
1170			while (pdir_order < (19-12)) {
1171				new_pdir += pdir_size;
1172				free_pages(new_pdir, pdir_order);
1173				pdir_order +=1;
1174				pdir_size <<=1;
1175			}
1176		}
1177	} else {
1178		/*
1179		** 1MB or 2MB Pdir
1180		** Needs to be aligned on an "odd" 1MB boundary.
1181		*/
1182		unsigned long new_pdir = __get_free_pages(GFP_KERNEL, pdir_order+1); /* 2 or 4MB */
1183
1184		/* release original */
1185		free_pages( pdir_base, pdir_order);
1186
1187		/* release first 1MB */
1188		free_pages(new_pdir, 20-12);
1189
1190		pdir_base = new_pdir + 1024*1024;
1191
1192		if (pdir_order > (20-12)) {
1193			/*
1194			** 2MB Pdir.
1195			**
1196			** Flag tells init_bitmap() to mark bad 128k as used
1197			** and to reduce the size by 128k.
1198			*/
1199			piranha_bad_128k = 1;
1200
1201			new_pdir += 3*1024*1024;
1202			/* release last 1MB */
1203			free_pages(new_pdir, 20-12);
1204
1205			/* release unusable 128KB */
1206			free_pages(new_pdir - 128*1024 , 17-12);
1207
1208			pdir_size -= 128*1024;
1209		}
1210	}
1211
1212	memset((void *) pdir_base, 0, pdir_size);
1213	return (void *) pdir_base;
1214}
1215
1216struct ibase_data_struct {
1217	struct ioc *ioc;
1218	int ioc_num;
1219};
1220
1221static int setup_ibase_imask_callback(struct device *dev, void *data)
1222{
1223	/* lba_set_iregs() is in drivers/parisc/lba_pci.c */
1224        extern void lba_set_iregs(struct parisc_device *, u32, u32);
1225	struct parisc_device *lba = to_parisc_device(dev);
1226	struct ibase_data_struct *ibd = data;
1227	int rope_num = (lba->hpa.start >> 13) & 0xf;
1228	if (rope_num >> 3 == ibd->ioc_num)
1229		lba_set_iregs(lba, ibd->ioc->ibase, ibd->ioc->imask);
1230	return 0;
1231}
1232
1233/* setup Mercury or Elroy IBASE/IMASK registers. */
1234static void 
1235setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
1236{
1237	struct ibase_data_struct ibase_data = {
1238		.ioc		= ioc,
1239		.ioc_num	= ioc_num,
1240	};
1241
1242	device_for_each_child(&sba->dev, &ibase_data,
1243			      setup_ibase_imask_callback);
1244}
1245
1246#ifdef SBA_AGP_SUPPORT
1247static int
1248sba_ioc_find_quicksilver(struct device *dev, void *data)
1249{
1250	int *agp_found = data;
1251	struct parisc_device *lba = to_parisc_device(dev);
1252
1253	if (IS_QUICKSILVER(lba))
1254		*agp_found = 1;
1255	return 0;
1256}
1257#endif
1258
1259static void
1260sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
1261{
1262	u32 iova_space_mask;
1263	u32 iova_space_size;
1264	int iov_order, tcnfg;
1265#ifdef SBA_AGP_SUPPORT
1266	int agp_found = 0;
1267#endif
1268	/*
1269	** Firmware programs the base and size of a "safe IOVA space"
1270	** (one that doesn't overlap memory or LMMIO space) in the
1271	** IBASE and IMASK registers.
1272	*/
1273	ioc->ibase = READ_REG(ioc->ioc_hpa + IOC_IBASE) & ~0x1fffffULL;
1274	iova_space_size = ~(READ_REG(ioc->ioc_hpa + IOC_IMASK) & 0xFFFFFFFFUL) + 1;
1275
1276	if ((ioc->ibase < 0xfed00000UL) && ((ioc->ibase + iova_space_size) > 0xfee00000UL)) {
1277		printk("WARNING: IOV space overlaps local config and interrupt message, truncating\n");
1278		iova_space_size /= 2;
1279	}
1280
1281	/*
1282	** iov_order is always based on a 1GB IOVA space since we want to
1283	** turn on the other half for AGP GART.
1284	*/
1285	iov_order = get_order(iova_space_size >> (IOVP_SHIFT - PAGE_SHIFT));
1286	ioc->pdir_size = (iova_space_size / IOVP_SIZE) * sizeof(u64);
1287
1288	DBG_INIT("%s() hpa 0x%p IOV %dMB (%d bits)\n",
1289		__func__, ioc->ioc_hpa, iova_space_size >> 20,
1290		iov_order + PAGE_SHIFT);
1291
1292	ioc->pdir_base = (void *) __get_free_pages(GFP_KERNEL,
1293						   get_order(ioc->pdir_size));
1294	if (!ioc->pdir_base)
1295		panic("Couldn't allocate I/O Page Table\n");
1296
1297	memset(ioc->pdir_base, 0, ioc->pdir_size);
1298
1299	DBG_INIT("%s() pdir %p size %x\n",
1300			__func__, ioc->pdir_base, ioc->pdir_size);
1301
1302#ifdef SBA_HINT_SUPPORT
1303	ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
1304	ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT));
1305
1306	DBG_INIT("	hint_shift_pdir %x hint_mask_pdir %lx\n",
1307		ioc->hint_shift_pdir, ioc->hint_mask_pdir);
1308#endif
1309
1310	WARN_ON((((unsigned long) ioc->pdir_base) & PAGE_MASK) != (unsigned long) ioc->pdir_base);
1311	WRITE_REG(virt_to_phys(ioc->pdir_base), ioc->ioc_hpa + IOC_PDIR_BASE);
1312
1313	/* build IMASK for IOC and Elroy */
1314	iova_space_mask =  0xffffffff;
1315	iova_space_mask <<= (iov_order + PAGE_SHIFT);
1316	ioc->imask = iova_space_mask;
1317#ifdef ZX1_SUPPORT
1318	ioc->iovp_mask = ~(iova_space_mask + PAGE_SIZE - 1);
1319#endif
1320	sba_dump_tlb(ioc->ioc_hpa);
1321
1322	setup_ibase_imask(sba, ioc, ioc_num);
1323
1324	WRITE_REG(ioc->imask, ioc->ioc_hpa + IOC_IMASK);
1325
1326#ifdef CONFIG_64BIT
1327	/*
1328	** Setting the upper bits makes checking for bypass addresses
1329	** a little faster later on.
1330	*/
1331	ioc->imask |= 0xFFFFFFFF00000000UL;
1332#endif
1333
1334	/* Set I/O PDIR Page size to system page size */
1335	switch (PAGE_SHIFT) {
1336		case 12: tcnfg = 0; break;	/*  4K */
1337		case 13: tcnfg = 1; break;	/*  8K */
1338		case 14: tcnfg = 2; break;	/* 16K */
1339		case 16: tcnfg = 3; break;	/* 64K */
1340		default:
1341			panic(__FILE__ "Unsupported system page size %d",
1342				1 << PAGE_SHIFT);
1343			break;
1344	}
1345	WRITE_REG(tcnfg, ioc->ioc_hpa + IOC_TCNFG);
1346
1347	/*
1348	** Program the IOC's ibase and enable IOVA translation
1349	** Bit zero == enable bit.
1350	*/
1351	WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa + IOC_IBASE);
1352
1353	/*
1354	** Clear I/O TLB of any possible entries.
1355	** (Yes. This is a bit paranoid...but so what)
1356	*/
1357	WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM);
1358
1359#ifdef SBA_AGP_SUPPORT
1360
1361	/*
1362	** If an AGP device is present, only use half of the IOV space
1363	** for PCI DMA.  Unfortunately we can't know ahead of time
1364	** whether GART support will actually be used, for now we
1365	** can just key on any AGP device found in the system.
1366	** We program the next pdir index after we stop w/ a key for
1367	** the GART code to handshake on.
1368	*/
1369	device_for_each_child(&sba->dev, &agp_found, sba_ioc_find_quicksilver);
1370
1371	if (agp_found && sba_reserve_agpgart) {
1372		printk(KERN_INFO "%s: reserving %dMb of IOVA space for agpgart\n",
1373		       __func__, (iova_space_size/2) >> 20);
1374		ioc->pdir_size /= 2;
1375		ioc->pdir_base[PDIR_INDEX(iova_space_size/2)] = SBA_AGPGART_COOKIE;
1376	}
1377#endif /*SBA_AGP_SUPPORT*/
1378}
1379
1380static void
1381sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
1382{
1383	u32 iova_space_size, iova_space_mask;
1384	unsigned int pdir_size, iov_order, tcnfg;
1385
1386	/*
1387	** Determine IOVA Space size from memory size.
1388	**
1389	** Ideally, PCI drivers would register the maximum number
1390	** of DMA they can have outstanding for each device they
1391	** own.  Next best thing would be to guess how much DMA
1392	** can be outstanding based on PCI Class/sub-class. Both
1393	** methods still require some "extra" to support PCI
1394	** Hot-Plug/Removal of PCI cards. (aka PCI OLARD).
1395	**
1396	** While we have 32-bits "IOVA" space, top two 2 bits are used
1397	** for DMA hints - ergo only 30 bits max.
1398	*/
1399
1400	iova_space_size = (u32) (totalram_pages()/global_ioc_cnt);
1401
1402	/* limit IOVA space size to 1MB-1GB */
1403	if (iova_space_size < (1 << (20 - PAGE_SHIFT))) {
1404		iova_space_size = 1 << (20 - PAGE_SHIFT);
1405	}
1406	else if (iova_space_size > (1 << (30 - PAGE_SHIFT))) {
1407		iova_space_size = 1 << (30 - PAGE_SHIFT);
1408	}
1409
1410	/*
1411	** iova space must be log2() in size.
1412	** thus, pdir/res_map will also be log2().
1413	** PIRANHA BUG: Exception is when IO Pdir is 2MB (gets reduced)
1414	*/
1415	iov_order = get_order(iova_space_size << PAGE_SHIFT);
1416
1417	/* iova_space_size is now bytes, not pages */
1418	iova_space_size = 1 << (iov_order + PAGE_SHIFT);
1419
1420	ioc->pdir_size = pdir_size = (iova_space_size/IOVP_SIZE) * sizeof(u64);
1421
1422	DBG_INIT("%s() hpa 0x%lx mem %ldMB IOV %dMB (%d bits)\n",
1423			__func__,
1424			ioc->ioc_hpa,
1425			(unsigned long) totalram_pages() >> (20 - PAGE_SHIFT),
1426			iova_space_size>>20,
1427			iov_order + PAGE_SHIFT);
1428
1429	ioc->pdir_base = sba_alloc_pdir(pdir_size);
1430
1431	DBG_INIT("%s() pdir %p size %x\n",
1432			__func__, ioc->pdir_base, pdir_size);
1433
1434#ifdef SBA_HINT_SUPPORT
1435	/* FIXME : DMA HINTs not used */
1436	ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
1437	ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT));
1438
1439	DBG_INIT("	hint_shift_pdir %x hint_mask_pdir %lx\n",
1440			ioc->hint_shift_pdir, ioc->hint_mask_pdir);
1441#endif
1442
1443	WRITE_REG64(virt_to_phys(ioc->pdir_base), ioc->ioc_hpa + IOC_PDIR_BASE);
1444
1445	/* build IMASK for IOC and Elroy */
1446	iova_space_mask =  0xffffffff;
1447	iova_space_mask <<= (iov_order + PAGE_SHIFT);
1448
1449	/*
1450	** On C3000 w/512MB mem, HP-UX 10.20 reports:
1451	**     ibase=0, imask=0xFE000000, size=0x2000000.
1452	*/
1453	ioc->ibase = 0;
1454	ioc->imask = iova_space_mask;	/* save it */
1455#ifdef ZX1_SUPPORT
1456	ioc->iovp_mask = ~(iova_space_mask + PAGE_SIZE - 1);
1457#endif
1458
1459	DBG_INIT("%s() IOV base 0x%lx mask 0x%0lx\n",
1460		__func__, ioc->ibase, ioc->imask);
1461
1462	/*
1463	** FIXME: Hint registers are programmed with default hint
1464	** values during boot, so hints should be sane even if we
1465	** can't reprogram them the way drivers want.
1466	*/
1467
1468	setup_ibase_imask(sba, ioc, ioc_num);
1469
1470	/*
1471	** Program the IOC's ibase and enable IOVA translation
1472	*/
1473	WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa+IOC_IBASE);
1474	WRITE_REG(ioc->imask, ioc->ioc_hpa+IOC_IMASK);
1475
1476	/* Set I/O PDIR Page size to system page size */
1477	switch (PAGE_SHIFT) {
1478		case 12: tcnfg = 0; break;	/*  4K */
1479		case 13: tcnfg = 1; break;	/*  8K */
1480		case 14: tcnfg = 2; break;	/* 16K */
1481		case 16: tcnfg = 3; break;	/* 64K */
1482		default:
1483			panic(__FILE__ "Unsupported system page size %d",
1484				1 << PAGE_SHIFT);
1485			break;
1486	}
1487	/* Set I/O PDIR Page size to PAGE_SIZE (4k/16k/...) */
1488	WRITE_REG(tcnfg, ioc->ioc_hpa+IOC_TCNFG);
1489
1490	/*
1491	** Clear I/O TLB of any possible entries.
1492	** (Yes. This is a bit paranoid...but so what)
1493	*/
1494	WRITE_REG(0 | 31, ioc->ioc_hpa+IOC_PCOM);
1495
1496	ioc->ibase = 0; /* used by SBA_IOVA and related macros */	
1497
1498	DBG_INIT("%s() DONE\n", __func__);
1499}
1500
1501
1502
1503/**************************************************************************
1504**
1505**   SBA initialization code (HW and SW)
1506**
1507**   o identify SBA chip itself
1508**   o initialize SBA chip modes (HardFail)
1509**   o initialize SBA chip modes (HardFail)
1510**   o FIXME: initialize DMA hints for reasonable defaults
1511**
1512**************************************************************************/
1513
1514static void __iomem *ioc_remap(struct sba_device *sba_dev, unsigned int offset)
1515{
1516	return ioremap(sba_dev->dev->hpa.start + offset, SBA_FUNC_SIZE);
1517}
1518
1519static void sba_hw_init(struct sba_device *sba_dev)
1520{ 
1521	int i;
1522	int num_ioc;
1523	u64 ioc_ctl;
1524
1525	if (!is_pdc_pat()) {
1526		/* Shutdown the USB controller on Astro-based workstations.
1527		** Once we reprogram the IOMMU, the next DMA performed by
1528		** USB will HPMC the box. USB is only enabled if a
1529		** keyboard is present and found.
1530		**
1531		** With serial console, j6k v5.0 firmware says:
1532		**   mem_kbd hpa 0xfee003f8 sba 0x0 pad 0x0 cl_class 0x7
1533		**
1534		** FIXME: Using GFX+USB console at power up but direct
1535		**	linux to serial console is still broken.
1536		**	USB could generate DMA so we must reset USB.
1537		**	The proper sequence would be:
1538		**	o block console output
1539		**	o reset USB device
1540		**	o reprogram serial port
1541		**	o unblock console output
1542		*/
1543		if (PAGE0->mem_kbd.cl_class == CL_KEYBD) {
1544			pdc_io_reset_devices();
1545		}
1546
1547	}
1548
1549
1550#if 0
1551printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa,
1552	PAGE0->mem_boot.spa, PAGE0->mem_boot.pad, PAGE0->mem_boot.cl_class);
1553
1554	/*
1555	** Need to deal with DMA from LAN.
1556	**	Maybe use page zero boot device as a handle to talk
1557	**	to PDC about which device to shutdown.
1558	**
1559	** Netbooting, j6k v5.0 firmware says:
1560	** 	mem_boot hpa 0xf4008000 sba 0x0 pad 0x0 cl_class 0x1002
1561	** ARGH! invalid class.
1562	*/
1563	if ((PAGE0->mem_boot.cl_class != CL_RANDOM)
1564		&& (PAGE0->mem_boot.cl_class != CL_SEQU)) {
1565			pdc_io_reset();
1566	}
1567#endif
1568
1569	if (!IS_PLUTO(sba_dev->dev)) {
1570		ioc_ctl = READ_REG(sba_dev->sba_hpa+IOC_CTRL);
1571		DBG_INIT("%s() hpa 0x%lx ioc_ctl 0x%Lx ->",
1572			__func__, sba_dev->sba_hpa, ioc_ctl);
1573		ioc_ctl &= ~(IOC_CTRL_RM | IOC_CTRL_NC | IOC_CTRL_CE);
1574		ioc_ctl |= IOC_CTRL_DD | IOC_CTRL_D4 | IOC_CTRL_TC;
1575			/* j6700 v1.6 firmware sets 0x294f */
1576			/* A500 firmware sets 0x4d */
1577
1578		WRITE_REG(ioc_ctl, sba_dev->sba_hpa+IOC_CTRL);
1579
1580#ifdef DEBUG_SBA_INIT
1581		ioc_ctl = READ_REG64(sba_dev->sba_hpa+IOC_CTRL);
1582		DBG_INIT(" 0x%Lx\n", ioc_ctl);
1583#endif
1584	} /* if !PLUTO */
1585
1586	if (IS_ASTRO(sba_dev->dev)) {
1587		int err;
1588		sba_dev->ioc[0].ioc_hpa = ioc_remap(sba_dev, ASTRO_IOC_OFFSET);
1589		num_ioc = 1;
1590
1591		sba_dev->chip_resv.name = "Astro Intr Ack";
1592		sba_dev->chip_resv.start = PCI_F_EXTEND | 0xfef00000UL;
1593		sba_dev->chip_resv.end   = PCI_F_EXTEND | (0xff000000UL - 1) ;
1594		err = request_resource(&iomem_resource, &(sba_dev->chip_resv));
1595		BUG_ON(err < 0);
1596
1597	} else if (IS_PLUTO(sba_dev->dev)) {
1598		int err;
1599
1600		sba_dev->ioc[0].ioc_hpa = ioc_remap(sba_dev, PLUTO_IOC_OFFSET);
1601		num_ioc = 1;
1602
1603		sba_dev->chip_resv.name = "Pluto Intr/PIOP/VGA";
1604		sba_dev->chip_resv.start = PCI_F_EXTEND | 0xfee00000UL;
1605		sba_dev->chip_resv.end   = PCI_F_EXTEND | (0xff200000UL - 1);
1606		err = request_resource(&iomem_resource, &(sba_dev->chip_resv));
1607		WARN_ON(err < 0);
1608
1609		sba_dev->iommu_resv.name = "IOVA Space";
1610		sba_dev->iommu_resv.start = 0x40000000UL;
1611		sba_dev->iommu_resv.end   = 0x50000000UL - 1;
1612		err = request_resource(&iomem_resource, &(sba_dev->iommu_resv));
1613		WARN_ON(err < 0);
1614	} else {
1615		/* IKE, REO */
1616		sba_dev->ioc[0].ioc_hpa = ioc_remap(sba_dev, IKE_IOC_OFFSET(0));
1617		sba_dev->ioc[1].ioc_hpa = ioc_remap(sba_dev, IKE_IOC_OFFSET(1));
1618		num_ioc = 2;
1619
1620		/* TODO - LOOKUP Ike/Stretch chipset mem map */
1621	}
1622	/* XXX: What about Reo Grande? */
1623
1624	sba_dev->num_ioc = num_ioc;
1625	for (i = 0; i < num_ioc; i++) {
1626		void __iomem *ioc_hpa = sba_dev->ioc[i].ioc_hpa;
1627		unsigned int j;
1628
1629		for (j=0; j < sizeof(u64) * ROPES_PER_IOC; j+=sizeof(u64)) {
1630
1631			/*
1632			 * Clear ROPE(N)_CONFIG AO bit.
1633			 * Disables "NT Ordering" (~= !"Relaxed Ordering")
1634			 * Overrides bit 1 in DMA Hint Sets.
1635			 * Improves netperf UDP_STREAM by ~10% for bcm5701.
1636			 */
1637			if (IS_PLUTO(sba_dev->dev)) {
1638				void __iomem *rope_cfg;
1639				unsigned long cfg_val;
1640
1641				rope_cfg = ioc_hpa + IOC_ROPE0_CFG + j;
1642				cfg_val = READ_REG(rope_cfg);
1643				cfg_val &= ~IOC_ROPE_AO;
1644				WRITE_REG(cfg_val, rope_cfg);
1645			}
1646
1647			/*
1648			** Make sure the box crashes on rope errors.
1649			*/
1650			WRITE_REG(HF_ENABLE, ioc_hpa + ROPE0_CTL + j);
1651		}
1652
1653		/* flush out the last writes */
1654		READ_REG(sba_dev->ioc[i].ioc_hpa + ROPE7_CTL);
1655
1656		DBG_INIT("	ioc[%d] ROPE_CFG 0x%Lx  ROPE_DBG 0x%Lx\n",
1657				i,
1658				READ_REG(sba_dev->ioc[i].ioc_hpa + 0x40),
1659				READ_REG(sba_dev->ioc[i].ioc_hpa + 0x50)
1660			);
1661		DBG_INIT("	STATUS_CONTROL 0x%Lx  FLUSH_CTRL 0x%Lx\n",
1662				READ_REG(sba_dev->ioc[i].ioc_hpa + 0x108),
1663				READ_REG(sba_dev->ioc[i].ioc_hpa + 0x400)
1664			);
1665
1666		if (IS_PLUTO(sba_dev->dev)) {
1667			sba_ioc_init_pluto(sba_dev->dev, &(sba_dev->ioc[i]), i);
1668		} else {
1669			sba_ioc_init(sba_dev->dev, &(sba_dev->ioc[i]), i);
1670		}
1671	}
1672}
1673
1674static void
1675sba_common_init(struct sba_device *sba_dev)
1676{
1677	int i;
1678
1679	/* add this one to the head of the list (order doesn't matter)
1680	** This will be useful for debugging - especially if we get coredumps
1681	*/
1682	sba_dev->next = sba_list;
1683	sba_list = sba_dev;
1684
1685	for(i=0; i< sba_dev->num_ioc; i++) {
1686		int res_size;
1687#ifdef DEBUG_DMB_TRAP
1688		extern void iterate_pages(unsigned long , unsigned long ,
1689					  void (*)(pte_t * , unsigned long),
1690					  unsigned long );
1691		void set_data_memory_break(pte_t * , unsigned long);
1692#endif
1693		/* resource map size dictated by pdir_size */
1694		res_size = sba_dev->ioc[i].pdir_size/sizeof(u64); /* entries */
1695
1696		/* Second part of PIRANHA BUG */
1697		if (piranha_bad_128k) {
1698			res_size -= (128*1024)/sizeof(u64);
1699		}
1700
1701		res_size >>= 3;  /* convert bit count to byte count */
1702		DBG_INIT("%s() res_size 0x%x\n",
1703			__func__, res_size);
1704
1705		sba_dev->ioc[i].res_size = res_size;
1706		sba_dev->ioc[i].res_map = (char *) __get_free_pages(GFP_KERNEL, get_order(res_size));
1707
1708#ifdef DEBUG_DMB_TRAP
1709		iterate_pages( sba_dev->ioc[i].res_map, res_size,
1710				set_data_memory_break, 0);
1711#endif
1712
1713		if (NULL == sba_dev->ioc[i].res_map)
1714		{
1715			panic("%s:%s() could not allocate resource map\n",
1716			      __FILE__, __func__ );
1717		}
1718
1719		memset(sba_dev->ioc[i].res_map, 0, res_size);
1720		/* next available IOVP - circular search */
1721		sba_dev->ioc[i].res_hint = (unsigned long *)
1722				&(sba_dev->ioc[i].res_map[L1_CACHE_BYTES]);
1723
1724#ifdef ASSERT_PDIR_SANITY
1725		/* Mark first bit busy - ie no IOVA 0 */
1726		sba_dev->ioc[i].res_map[0] = 0x80;
1727		sba_dev->ioc[i].pdir_base[0] = 0xeeffc0addbba0080ULL;
1728#endif
1729
1730		/* Third (and last) part of PIRANHA BUG */
1731		if (piranha_bad_128k) {
1732			/* region from +1408K to +1536 is un-usable. */
1733
1734			int idx_start = (1408*1024/sizeof(u64)) >> 3;
1735			int idx_end   = (1536*1024/sizeof(u64)) >> 3;
1736			long *p_start = (long *) &(sba_dev->ioc[i].res_map[idx_start]);
1737			long *p_end   = (long *) &(sba_dev->ioc[i].res_map[idx_end]);
1738
1739			/* mark that part of the io pdir busy */
1740			while (p_start < p_end)
1741				*p_start++ = -1;
1742				
1743		}
1744
1745#ifdef DEBUG_DMB_TRAP
1746		iterate_pages( sba_dev->ioc[i].res_map, res_size,
1747				set_data_memory_break, 0);
1748		iterate_pages( sba_dev->ioc[i].pdir_base, sba_dev->ioc[i].pdir_size,
1749				set_data_memory_break, 0);
1750#endif
1751
1752		DBG_INIT("%s() %d res_map %x %p\n",
1753			__func__, i, res_size, sba_dev->ioc[i].res_map);
1754	}
1755
1756	spin_lock_init(&sba_dev->sba_lock);
1757	ioc_needs_fdc = boot_cpu_data.pdc.capabilities & PDC_MODEL_IOPDIR_FDC;
1758
1759#ifdef DEBUG_SBA_INIT
1760	/*
1761	 * If the PDC_MODEL capabilities has Non-coherent IO-PDIR bit set
1762	 * (bit #61, big endian), we have to flush and sync every time
1763	 * IO-PDIR is changed in Ike/Astro.
1764	 */
1765	if (ioc_needs_fdc) {
1766		printk(KERN_INFO MODULE_NAME " FDC/SYNC required.\n");
1767	} else {
1768		printk(KERN_INFO MODULE_NAME " IOC has cache coherent PDIR.\n");
1769	}
1770#endif
1771}
1772
1773#ifdef CONFIG_PROC_FS
1774static int sba_proc_info(struct seq_file *m, void *p)
1775{
1776	struct sba_device *sba_dev = sba_list;
1777	struct ioc *ioc = &sba_dev->ioc[0];	/* FIXME: Multi-IOC support! */
1778	int total_pages = (int) (ioc->res_size << 3); /* 8 bits per byte */
1779#ifdef SBA_COLLECT_STATS
1780	unsigned long avg = 0, min, max;
1781#endif
1782	int i;
1783
1784	seq_printf(m, "%s rev %d.%d\n",
1785		   sba_dev->name,
1786		   (sba_dev->hw_rev & 0x7) + 1,
1787		   (sba_dev->hw_rev & 0x18) >> 3);
1788	seq_printf(m, "IO PDIR size    : %d bytes (%d entries)\n",
1789		   (int)((ioc->res_size << 3) * sizeof(u64)), /* 8 bits/byte */
1790		   total_pages);
1791
1792	seq_printf(m, "Resource bitmap : %d bytes (%d pages)\n",
1793		   ioc->res_size, ioc->res_size << 3);   /* 8 bits per byte */
1794
1795	seq_printf(m, "LMMIO_BASE/MASK/ROUTE %08x %08x %08x\n",
1796		   READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_BASE),
1797		   READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_MASK),
1798		   READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_ROUTE));
 
 
1799
1800	for (i=0; i<4; i++)
1801		seq_printf(m, "DIR%d_BASE/MASK/ROUTE %08x %08x %08x\n",
1802			   i,
1803			   READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_BASE  + i*0x18),
1804			   READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_MASK  + i*0x18),
1805			   READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_ROUTE + i*0x18));
1806
1807#ifdef SBA_COLLECT_STATS
1808	seq_printf(m, "IO PDIR entries : %ld free  %ld used (%d%%)\n",
1809		   total_pages - ioc->used_pages, ioc->used_pages,
1810		   (int)(ioc->used_pages * 100 / total_pages));
1811
1812	min = max = ioc->avg_search[0];
1813	for (i = 0; i < SBA_SEARCH_SAMPLE; i++) {
1814		avg += ioc->avg_search[i];
1815		if (ioc->avg_search[i] > max) max = ioc->avg_search[i];
1816		if (ioc->avg_search[i] < min) min = ioc->avg_search[i];
1817	}
1818	avg /= SBA_SEARCH_SAMPLE;
1819	seq_printf(m, "  Bitmap search : %ld/%ld/%ld (min/avg/max CPU Cycles)\n",
1820		   min, avg, max);
1821
1822	seq_printf(m, "pci_map_single(): %12ld calls  %12ld pages (avg %d/1000)\n",
1823		   ioc->msingle_calls, ioc->msingle_pages,
1824		   (int)((ioc->msingle_pages * 1000)/ioc->msingle_calls));
1825
1826	/* KLUGE - unmap_sg calls unmap_single for each mapped page */
1827	min = ioc->usingle_calls;
1828	max = ioc->usingle_pages - ioc->usg_pages;
1829	seq_printf(m, "pci_unmap_single: %12ld calls  %12ld pages (avg %d/1000)\n",
1830		   min, max, (int)((max * 1000)/min));
1831
1832	seq_printf(m, "pci_map_sg()    : %12ld calls  %12ld pages (avg %d/1000)\n",
1833		   ioc->msg_calls, ioc->msg_pages,
1834		   (int)((ioc->msg_pages * 1000)/ioc->msg_calls));
1835
1836	seq_printf(m, "pci_unmap_sg()  : %12ld calls  %12ld pages (avg %d/1000)\n",
1837		   ioc->usg_calls, ioc->usg_pages,
1838		   (int)((ioc->usg_pages * 1000)/ioc->usg_calls));
1839#endif
1840
1841	return 0;
1842}
1843
1844static int
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1845sba_proc_bitmap_info(struct seq_file *m, void *p)
1846{
1847	struct sba_device *sba_dev = sba_list;
1848	struct ioc *ioc = &sba_dev->ioc[0];	/* FIXME: Multi-IOC support! */
 
 
1849
1850	seq_hex_dump(m, "   ", DUMP_PREFIX_NONE, 32, 4, ioc->res_map,
1851		     ioc->res_size, false);
1852	seq_putc(m, '\n');
 
 
 
1853
1854	return 0;
1855}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1856#endif /* CONFIG_PROC_FS */
1857
1858static const struct parisc_device_id sba_tbl[] __initconst = {
1859	{ HPHW_IOA, HVERSION_REV_ANY_ID, ASTRO_RUNWAY_PORT, 0xb },
1860	{ HPHW_BCPORT, HVERSION_REV_ANY_ID, IKE_MERCED_PORT, 0xc },
1861	{ HPHW_BCPORT, HVERSION_REV_ANY_ID, REO_MERCED_PORT, 0xc },
1862	{ HPHW_BCPORT, HVERSION_REV_ANY_ID, REOG_MERCED_PORT, 0xc },
1863	{ HPHW_IOA, HVERSION_REV_ANY_ID, PLUTO_MCKINLEY_PORT, 0xc },
1864	{ 0, }
1865};
1866
1867static int sba_driver_callback(struct parisc_device *);
1868
1869static struct parisc_driver sba_driver __refdata = {
1870	.name =		MODULE_NAME,
1871	.id_table =	sba_tbl,
1872	.probe =	sba_driver_callback,
1873};
1874
1875/*
1876** Determine if sba should claim this chip (return 0) or not (return 1).
1877** If so, initialize the chip and tell other partners in crime they
1878** have work to do.
1879*/
1880static int __init sba_driver_callback(struct parisc_device *dev)
1881{
1882	struct sba_device *sba_dev;
1883	u32 func_class;
1884	int i;
1885	char *version;
1886	void __iomem *sba_addr = ioremap(dev->hpa.start, SBA_FUNC_SIZE);
1887#ifdef CONFIG_PROC_FS
1888	struct proc_dir_entry *root;
1889#endif
1890
1891	sba_dump_ranges(sba_addr);
1892
1893	/* Read HW Rev First */
1894	func_class = READ_REG(sba_addr + SBA_FCLASS);
1895
1896	if (IS_ASTRO(dev)) {
1897		unsigned long fclass;
1898		static char astro_rev[]="Astro ?.?";
1899
1900		/* Astro is broken...Read HW Rev First */
1901		fclass = READ_REG(sba_addr);
1902
1903		astro_rev[6] = '1' + (char) (fclass & 0x7);
1904		astro_rev[8] = '0' + (char) ((fclass & 0x18) >> 3);
1905		version = astro_rev;
1906
1907	} else if (IS_IKE(dev)) {
1908		static char ike_rev[] = "Ike rev ?";
1909		ike_rev[8] = '0' + (char) (func_class & 0xff);
1910		version = ike_rev;
1911	} else if (IS_PLUTO(dev)) {
1912		static char pluto_rev[]="Pluto ?.?";
1913		pluto_rev[6] = '0' + (char) ((func_class & 0xf0) >> 4); 
1914		pluto_rev[8] = '0' + (char) (func_class & 0x0f); 
1915		version = pluto_rev;
1916	} else {
1917		static char reo_rev[] = "REO rev ?";
1918		reo_rev[8] = '0' + (char) (func_class & 0xff);
1919		version = reo_rev;
1920	}
1921
1922	if (!global_ioc_cnt) {
1923		global_ioc_cnt = count_parisc_driver(&sba_driver);
1924
1925		/* Astro and Pluto have one IOC per SBA */
1926		if ((!IS_ASTRO(dev)) || (!IS_PLUTO(dev)))
1927			global_ioc_cnt *= 2;
1928	}
1929
1930	printk(KERN_INFO "%s found %s at 0x%llx\n",
1931		MODULE_NAME, version, (unsigned long long)dev->hpa.start);
1932
1933	sba_dev = kzalloc(sizeof(struct sba_device), GFP_KERNEL);
1934	if (!sba_dev) {
1935		printk(KERN_ERR MODULE_NAME " - couldn't alloc sba_device\n");
1936		return -ENOMEM;
1937	}
1938
1939	parisc_set_drvdata(dev, sba_dev);
1940
1941	for(i=0; i<MAX_IOC; i++)
1942		spin_lock_init(&(sba_dev->ioc[i].res_lock));
1943
1944	sba_dev->dev = dev;
1945	sba_dev->hw_rev = func_class;
1946	sba_dev->name = dev->name;
1947	sba_dev->sba_hpa = sba_addr;
1948
1949	sba_get_pat_resources(sba_dev);
1950	sba_hw_init(sba_dev);
1951	sba_common_init(sba_dev);
1952
1953	hppa_dma_ops = &sba_ops;
1954
1955#ifdef CONFIG_PROC_FS
1956	switch (dev->id.hversion) {
1957	case PLUTO_MCKINLEY_PORT:
1958		root = proc_mckinley_root;
1959		break;
1960	case ASTRO_RUNWAY_PORT:
1961	case IKE_MERCED_PORT:
1962	default:
1963		root = proc_runway_root;
1964		break;
1965	}
1966
1967	proc_create_single("sba_iommu", 0, root, sba_proc_info);
1968	proc_create_single("sba_iommu-bitmap", 0, root, sba_proc_bitmap_info);
1969#endif
 
 
1970	return 0;
1971}
1972
1973/*
1974** One time initialization to let the world know the SBA was found.
1975** This is the only routine which is NOT static.
1976** Must be called exactly once before pci_init().
1977*/
1978void __init sba_init(void)
1979{
1980	register_parisc_driver(&sba_driver);
1981}
1982
1983
1984/**
1985 * sba_get_iommu - Assign the iommu pointer for the pci bus controller.
1986 * @dev: The parisc device.
1987 *
1988 * Returns the appropriate IOMMU data for the given parisc PCI controller.
1989 * This is cached and used later for PCI DMA Mapping.
1990 */
1991void * sba_get_iommu(struct parisc_device *pci_hba)
1992{
1993	struct parisc_device *sba_dev = parisc_parent(pci_hba);
1994	struct sba_device *sba = dev_get_drvdata(&sba_dev->dev);
1995	char t = sba_dev->id.hw_type;
1996	int iocnum = (pci_hba->hw_path >> 3);	/* rope # */
1997
1998	WARN_ON((t != HPHW_IOA) && (t != HPHW_BCPORT));
1999
2000	return &(sba->ioc[iocnum]);
2001}
2002
2003
2004/**
2005 * sba_directed_lmmio - return first directed LMMIO range routed to rope
2006 * @pa_dev: The parisc device.
2007 * @r: resource PCI host controller wants start/end fields assigned.
2008 *
2009 * For the given parisc PCI controller, determine if any direct ranges
2010 * are routed down the corresponding rope.
2011 */
2012void sba_directed_lmmio(struct parisc_device *pci_hba, struct resource *r)
2013{
2014	struct parisc_device *sba_dev = parisc_parent(pci_hba);
2015	struct sba_device *sba = dev_get_drvdata(&sba_dev->dev);
2016	char t = sba_dev->id.hw_type;
2017	int i;
2018	int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1));  /* rope # */
2019
2020	BUG_ON((t!=HPHW_IOA) && (t!=HPHW_BCPORT));
2021
2022	r->start = r->end = 0;
2023
2024	/* Astro has 4 directed ranges. Not sure about Ike/Pluto/et al */
2025	for (i=0; i<4; i++) {
2026		int base, size;
2027		void __iomem *reg = sba->sba_hpa + i*0x18;
2028
2029		base = READ_REG32(reg + LMMIO_DIRECT0_BASE);
2030		if ((base & 1) == 0)
2031			continue;	/* not enabled */
2032
2033		size = READ_REG32(reg + LMMIO_DIRECT0_ROUTE);
2034
2035		if ((size & (ROPES_PER_IOC-1)) != rope)
2036			continue;	/* directed down different rope */
2037		
2038		r->start = (base & ~1UL) | PCI_F_EXTEND;
2039		size = ~ READ_REG32(reg + LMMIO_DIRECT0_MASK);
2040		r->end = r->start + size;
2041		r->flags = IORESOURCE_MEM;
2042	}
2043}
2044
2045
2046/**
2047 * sba_distributed_lmmio - return portion of distributed LMMIO range
2048 * @pa_dev: The parisc device.
2049 * @r: resource PCI host controller wants start/end fields assigned.
2050 *
2051 * For the given parisc PCI controller, return portion of distributed LMMIO
2052 * range. The distributed LMMIO is always present and it's just a question
2053 * of the base address and size of the range.
2054 */
2055void sba_distributed_lmmio(struct parisc_device *pci_hba, struct resource *r )
2056{
2057	struct parisc_device *sba_dev = parisc_parent(pci_hba);
2058	struct sba_device *sba = dev_get_drvdata(&sba_dev->dev);
2059	char t = sba_dev->id.hw_type;
2060	int base, size;
2061	int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1));  /* rope # */
2062
2063	BUG_ON((t!=HPHW_IOA) && (t!=HPHW_BCPORT));
2064
2065	r->start = r->end = 0;
2066
2067	base = READ_REG32(sba->sba_hpa + LMMIO_DIST_BASE);
2068	if ((base & 1) == 0) {
2069		BUG();	/* Gah! Distr Range wasn't enabled! */
2070		return;
2071	}
2072
2073	r->start = (base & ~1UL) | PCI_F_EXTEND;
2074
2075	size = (~READ_REG32(sba->sba_hpa + LMMIO_DIST_MASK)) / ROPES_PER_IOC;
2076	r->start += rope * (size + 1);	/* adjust base for this rope */
2077	r->end = r->start + size;
2078	r->flags = IORESOURCE_MEM;
2079}