Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Digsy MTC board Device Tree Source
4 *
5 * Copyright (C) 2009 Semihalf
6 *
7 * Based on the CM5200 by M. Balakowicz
8 */
9
10/include/ "mpc5200b.dtsi"
11
12&gpt0 { gpio-controller; fsl,has-wdt; };
13&gpt1 { gpio-controller; };
14
15/ {
16 model = "intercontrol,digsy-mtc";
17 compatible = "intercontrol,digsy-mtc";
18
19 memory {
20 reg = <0x00000000 0x02000000>; // 32MB
21 };
22
23 soc5200@f0000000 {
24 rtc@800 {
25 status = "disabled";
26 };
27
28 spi@f00 {
29 msp430@0 {
30 compatible = "spidev";
31 spi-max-frequency = <32000>;
32 reg = <0>;
33 };
34 };
35
36 psc@2000 { // PSC1
37 status = "disabled";
38 };
39
40 psc@2200 { // PSC2
41 status = "disabled";
42 };
43
44 psc@2400 { // PSC3
45 status = "disabled";
46 };
47
48 psc@2600 { // PSC4
49 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
50 };
51
52 psc@2800 { // PSC5
53 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
54 };
55
56 psc@2c00 { // PSC6
57 status = "disabled";
58 };
59
60 ethernet@3000 {
61 phy-handle = <&phy0>;
62 };
63
64 mdio@3000 {
65 phy0: ethernet-phy@0 {
66 reg = <0>;
67 };
68 };
69
70 i2c@3d00 {
71 eeprom@50 {
72 compatible = "atmel,24c08";
73 reg = <0x50>;
74 };
75
76 rtc@56 {
77 compatible = "microcrystal,rv3029";
78 reg = <0x56>;
79 };
80
81 rtc@68 {
82 compatible = "dallas,ds1339";
83 reg = <0x68>;
84 };
85 };
86
87 i2c@3d40 {
88 status = "disabled";
89 };
90 };
91
92 pci@f0000d00 {
93 interrupt-map-mask = <0xf800 0 0 7>;
94 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
95 0xc000 0 0 2 &mpc5200_pic 0 0 3
96 0xc000 0 0 3 &mpc5200_pic 0 0 3
97 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
98 clock-frequency = <0>; // From boot loader
99 interrupts = <2 8 0 2 9 0 2 10 0>;
100 bus-range = <0 0>;
101 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
102 0x02000000 0 0x90000000 0x90000000 0 0x10000000
103 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
104 };
105
106 localbus {
107 ranges = <0 0 0xff000000 0x1000000
108 4 0 0x60000000 0x0001000>;
109
110 // 16-bit flash device at LocalPlus Bus CS0
111 flash@0,0 {
112 compatible = "cfi-flash";
113 reg = <0 0 0x1000000>;
114 bank-width = <2>;
115 device-width = <2>;
116 #size-cells = <1>;
117 #address-cells = <1>;
118
119 partition@0 {
120 label = "kernel";
121 reg = <0x0 0x00200000>;
122 };
123 partition@200000 {
124 label = "root";
125 reg = <0x00200000 0x00300000>;
126 };
127 partition@500000 {
128 label = "user";
129 reg = <0x00500000 0x00a00000>;
130 };
131 partition@f00000 {
132 label = "u-boot";
133 reg = <0x00f00000 0x100000>;
134 };
135 };
136
137 can@4,0 {
138 compatible = "nxp,sja1000";
139 reg = <4 0x000 0x80>;
140 nxp,external-clock-frequency = <24000000>;
141 interrupts = <1 2 3>; // Level-low
142 };
143
144 can@4,100 {
145 compatible = "nxp,sja1000";
146 reg = <4 0x100 0x80>;
147 nxp,external-clock-frequency = <24000000>;
148 interrupts = <1 2 3>; // Level-low
149 };
150
151 serial@4,200 {
152 compatible = "nxp,sc28l92";
153 reg = <4 0x200 0x10>;
154 interrupts = <1 3 3>;
155 };
156 };
157};
1/*
2 * Digsy MTC board Device Tree Source
3 *
4 * Copyright (C) 2009 Semihalf
5 *
6 * Based on the CM5200 by M. Balakowicz
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 */
13
14/include/ "mpc5200b.dtsi"
15
16/ {
17 model = "intercontrol,digsy-mtc";
18 compatible = "intercontrol,digsy-mtc";
19
20 memory {
21 reg = <0x00000000 0x02000000>; // 32MB
22 };
23
24 soc5200@f0000000 {
25 timer@600 { // General Purpose Timer
26 fsl,has-wdt;
27 };
28
29 rtc@800 {
30 status = "disabled";
31 };
32
33 can@900 {
34 status = "disabled";
35 };
36
37 can@980 {
38 status = "disabled";
39 };
40
41 psc@2000 { // PSC1
42 status = "disabled";
43 };
44
45 psc@2200 { // PSC2
46 status = "disabled";
47 };
48
49 psc@2400 { // PSC3
50 status = "disabled";
51 };
52
53 psc@2600 { // PSC4
54 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
55 };
56
57 psc@2800 { // PSC5
58 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
59 };
60
61 psc@2c00 { // PSC6
62 status = "disabled";
63 };
64
65 ethernet@3000 {
66 phy-handle = <&phy0>;
67 };
68
69 mdio@3000 {
70 phy0: ethernet-phy@0 {
71 reg = <0>;
72 };
73 };
74
75 i2c@3d00 {
76 rtc@50 {
77 compatible = "at,24c08";
78 reg = <0x50>;
79 };
80
81 rtc@68 {
82 compatible = "dallas,ds1339";
83 reg = <0x68>;
84 };
85 };
86
87 i2c@3d40 {
88 status = "disabled";
89 };
90 };
91
92 pci@f0000d00 {
93 status = "disabled";
94 };
95
96 localbus {
97 ranges = <0 0 0xff000000 0x1000000>;
98
99 // 16-bit flash device at LocalPlus Bus CS0
100 flash@0,0 {
101 compatible = "cfi-flash";
102 reg = <0 0 0x1000000>;
103 bank-width = <2>;
104 device-width = <2>;
105 #size-cells = <1>;
106 #address-cells = <1>;
107
108 partition@0 {
109 label = "kernel";
110 reg = <0x0 0x00200000>;
111 };
112 partition@200000 {
113 label = "root";
114 reg = <0x00200000 0x00300000>;
115 };
116 partition@500000 {
117 label = "user";
118 reg = <0x00500000 0x00a00000>;
119 };
120 partition@f00000 {
121 label = "u-boot";
122 reg = <0x00f00000 0x100000>;
123 };
124 };
125 };
126};