Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2
3#
4# Light sensors
5#
6# When adding new entries keep the list in alphabetical order
7
8menu "Light sensors"
9
10config ACPI_ALS
11 tristate "ACPI Ambient Light Sensor"
12 depends on ACPI
13 select IIO_BUFFER
14 select IIO_TRIGGERED_BUFFER
15 select IIO_KFIFO_BUF
16 help
17 Say Y here if you want to build a driver for the ACPI0008
18 Ambient Light Sensor.
19
20 To compile this driver as a module, choose M here: the module will
21 be called acpi-als.
22
23config ADJD_S311
24 tristate "ADJD-S311-CR999 digital color sensor"
25 select IIO_BUFFER
26 select IIO_TRIGGERED_BUFFER
27 depends on I2C
28 help
29 If you say yes here you get support for the Avago ADJD-S311-CR999
30 digital color light sensor.
31
32 This driver can also be built as a module. If so, the module
33 will be called adjd_s311.
34
35config AL3320A
36 tristate "AL3320A ambient light sensor"
37 depends on I2C
38 help
39 Say Y here if you want to build a driver for the Dyna Image AL3320A
40 ambient light sensor.
41
42 To compile this driver as a module, choose M here: the
43 module will be called al3320a.
44
45config APDS9300
46 tristate "APDS9300 ambient light sensor"
47 depends on I2C
48 help
49 Say Y here if you want to build a driver for the Avago APDS9300
50 ambient light sensor.
51
52 To compile this driver as a module, choose M here: the
53 module will be called apds9300.
54
55config APDS9960
56 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor"
57 select REGMAP_I2C
58 select IIO_BUFFER
59 select IIO_KFIFO_BUF
60 depends on I2C
61 help
62 Say Y here to build I2C interface support for the Avago
63 APDS9960 gesture/RGB/ALS/proximity sensor.
64
65 To compile this driver as a module, choose M here: the
66 module will be called apds9960
67
68config BH1750
69 tristate "ROHM BH1750 ambient light sensor"
70 depends on I2C
71 help
72 Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
73 BH1750, BH1751 ambient light sensors.
74
75 To compile this driver as a module, choose M here: the module will
76 be called bh1750.
77
78config BH1780
79 tristate "ROHM BH1780 ambient light sensor"
80 depends on I2C
81 help
82 Say Y here to build support for the ROHM BH1780GLI ambient
83 light sensor.
84
85 To compile this driver as a module, choose M here: the module will
86 be called bh1780.
87
88config CM32181
89 depends on I2C
90 tristate "CM32181 driver"
91 help
92 Say Y here if you use cm32181.
93 This option enables ambient light sensor using
94 Capella cm32181 device driver.
95
96 To compile this driver as a module, choose M here:
97 the module will be called cm32181.
98
99config CM3232
100 depends on I2C
101 tristate "CM3232 ambient light sensor"
102 help
103 Say Y here if you use cm3232.
104 This option enables ambient light sensor using
105 Capella Microsystems cm3232 device driver.
106
107 To compile this driver as a module, choose M here:
108 the module will be called cm3232.
109
110config CM3323
111 depends on I2C
112 tristate "Capella CM3323 color light sensor"
113 help
114 Say Y here if you want to build a driver for Capella CM3323
115 color sensor.
116
117 To compile this driver as a module, choose M here: the module will
118 be called cm3323.
119
120config CM3605
121 tristate "Capella CM3605 ambient light and proximity sensor"
122 depends on OF
123 help
124 Say Y here if you want to build a driver for Capella CM3605
125 ambient light and short range proximity sensor.
126
127 To compile this driver as a module, choose M here: the module will
128 be called cm3605.
129
130config CM36651
131 depends on I2C
132 tristate "CM36651 driver"
133 help
134 Say Y here if you use cm36651.
135 This option enables proximity & RGB sensor using
136 Capella cm36651 device driver.
137
138 To compile this driver as a module, choose M here:
139 the module will be called cm36651.
140
141config IIO_CROS_EC_LIGHT_PROX
142 tristate "ChromeOS EC Light and Proximity Sensors"
143 depends on IIO_CROS_EC_SENSORS_CORE
144 help
145 Say Y here if you use the light and proximity sensors
146 presented by the ChromeOS EC Sensor hub.
147
148 To compile this driver as a module, choose M here:
149 the module will be called cros_ec_light_prox.
150
151config GP2AP020A00F
152 tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
153 depends on I2C
154 select REGMAP_I2C
155 select IIO_BUFFER
156 select IIO_TRIGGERED_BUFFER
157 select IRQ_WORK
158 help
159 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
160 hooked to an I2C bus.
161
162 To compile this driver as a module, choose M here: the
163 module will be called gp2ap020a00f.
164
165config SENSORS_ISL29018
166 tristate "Intersil 29018 light and proximity sensor"
167 depends on I2C
168 select REGMAP_I2C
169 default n
170 help
171 If you say yes here you get support for ambient light sensing and
172 proximity infrared sensing from Intersil ISL29018.
173 This driver will provide the measurements of ambient light intensity
174 in lux, proximity infrared sensing and normal infrared sensing.
175 Data from sensor is accessible via sysfs.
176
177config SENSORS_ISL29028
178 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
179 depends on I2C
180 select REGMAP_I2C
181 help
182 Provides driver for the Intersil's ISL29028 device.
183 This driver supports the sysfs interface to get the ALS, IR intensity,
184 Proximity value via iio. The ISL29028 provides the concurrent sensing
185 of ambient light and proximity.
186
187config ISL29125
188 tristate "Intersil ISL29125 digital color light sensor"
189 depends on I2C
190 select IIO_BUFFER
191 select IIO_TRIGGERED_BUFFER
192 help
193 Say Y here if you want to build a driver for the Intersil ISL29125
194 RGB light sensor for I2C.
195
196 To compile this driver as a module, choose M here: the module will be
197 called isl29125.
198
199config HID_SENSOR_ALS
200 depends on HID_SENSOR_HUB
201 select IIO_BUFFER
202 select IIO_TRIGGERED_BUFFER
203 select HID_SENSOR_IIO_COMMON
204 select HID_SENSOR_IIO_TRIGGER
205 tristate "HID ALS"
206 help
207 Say yes here to build support for the HID SENSOR
208 Ambient light sensor.
209
210 To compile this driver as a module, choose M here: the
211 module will be called hid-sensor-als.
212
213config HID_SENSOR_PROX
214 depends on HID_SENSOR_HUB
215 select IIO_BUFFER
216 select IIO_TRIGGERED_BUFFER
217 select HID_SENSOR_IIO_COMMON
218 select HID_SENSOR_IIO_TRIGGER
219 tristate "HID PROX"
220 help
221 Say yes here to build support for the HID SENSOR
222 Proximity sensor.
223
224 To compile this driver as a module, choose M here: the
225 module will be called hid-sensor-prox.
226
227config JSA1212
228 tristate "JSA1212 ALS and proximity sensor driver"
229 depends on I2C
230 select REGMAP_I2C
231 help
232 Say Y here if you want to build a IIO driver for JSA1212
233 proximity & ALS sensor device.
234
235 To compile this driver as a module, choose M here:
236 the module will be called jsa1212.
237
238config RPR0521
239 tristate "ROHM RPR0521 ALS and proximity sensor driver"
240 depends on I2C
241 select REGMAP_I2C
242 help
243 Say Y here if you want to build support for ROHM's RPR0521
244 ambient light and proximity sensor device.
245
246 To compile this driver as a module, choose M here:
247 the module will be called rpr0521.
248
249config SENSORS_LM3533
250 tristate "LM3533 ambient light sensor"
251 depends on MFD_LM3533
252 help
253 If you say yes here you get support for the ambient light sensor
254 interface on National Semiconductor / TI LM3533 Lighting Power
255 chips.
256
257 The sensor interface can be used to control the LEDs and backlights
258 of the chip through defining five light zones and three sets of
259 corresponding output-current values.
260
261 The driver provides raw and mean adc readings along with the current
262 light zone through sysfs. A threshold event can be generated on zone
263 changes. The ALS-control output values can be set per zone for the
264 three current output channels.
265
266config LTR501
267 tristate "LTR-501ALS-01 light sensor"
268 depends on I2C
269 select REGMAP_I2C
270 select IIO_BUFFER
271 select IIO_TRIGGERED_BUFFER
272 help
273 If you say yes here you get support for the Lite-On LTR-501ALS-01
274 ambient light and proximity sensor. This driver also supports LTR-559
275 ALS/PS or LTR-301 ALS sensors.
276
277 This driver can also be built as a module. If so, the module
278 will be called ltr501.
279
280config LV0104CS
281 tristate "LV0104CS Ambient Light Sensor"
282 depends on I2C
283 help
284 Say Y here if you want to build support for the On Semiconductor
285 LV0104CS ambient light sensor.
286
287 To compile this driver as a module, choose M here:
288 the module will be called lv0104cs.
289
290config MAX44000
291 tristate "MAX44000 Ambient and Infrared Proximity Sensor"
292 depends on I2C
293 select REGMAP_I2C
294 select IIO_BUFFER
295 select IIO_TRIGGERED_BUFFER
296 help
297 Say Y here if you want to build support for Maxim Integrated's
298 MAX44000 ambient and infrared proximity sensor device.
299
300 To compile this driver as a module, choose M here:
301 the module will be called max44000.
302
303config MAX44009
304 tristate "MAX44009 Ambient Light Sensor"
305 depends on I2C
306 select REGMAP_I2C
307 help
308 Say Y here if you want to build support for Maxim Integrated's
309 MAX44009 ambient light sensor device.
310
311 To compile this driver as a module, choose M here:
312 the module will be called max44009.
313
314config NOA1305
315 tristate "ON Semiconductor NOA1305 ambient light sensor"
316 depends on I2C
317 select REGMAP_I2C
318 help
319 Say Y here if you want to build support for the ON Semiconductor
320 NOA1305 ambient light sensor.
321
322 To compile this driver as a module, choose M here:
323 The module will be called noa1305.
324
325config OPT3001
326 tristate "Texas Instruments OPT3001 Light Sensor"
327 depends on I2C
328 help
329 If you say Y or M here, you get support for Texas Instruments
330 OPT3001 Ambient Light Sensor.
331
332 If built as a dynamically linked module, it will be called
333 opt3001.
334
335config PA12203001
336 tristate "TXC PA12203001 light and proximity sensor"
337 depends on I2C
338 select REGMAP_I2C
339 help
340 If you say yes here you get support for the TXC PA12203001
341 ambient light and proximity sensor.
342
343 This driver can also be built as a module. If so, the module
344 will be called pa12203001.
345
346config SI1133
347 tristate "SI1133 UV Index Sensor and Ambient Light Sensor"
348 depends on I2C
349 select REGMAP_I2C
350 help
351 Say Y here if you want to build a driver for the Silicon Labs SI1133
352 UV Index Sensor and Ambient Light Sensor chip.
353
354 To compile this driver as a module, choose M here: the module will be
355 called si1133.
356
357config SI1145
358 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor"
359 depends on I2C
360 select IIO_BUFFER
361 select IIO_TRIGGERED_BUFFER
362 help
363 Say Y here if you want to build a driver for the Silicon Labs SI1132 or
364 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor
365 chips.
366
367 To compile this driver as a module, choose M here: the module will be
368 called si1145.
369
370config STK3310
371 tristate "STK3310 ALS and proximity sensor"
372 depends on I2C
373 select REGMAP_I2C
374 help
375 Say yes here to get support for the Sensortek STK3310 ambient light
376 and proximity sensor. The STK3311 model is also supported by this
377 driver.
378
379 Choosing M will build the driver as a module. If so, the module
380 will be called stk3310.
381
382config ST_UVIS25
383 tristate "STMicroelectronics UVIS25 sensor driver"
384 depends on (I2C || SPI)
385 select IIO_BUFFER
386 select IIO_TRIGGERED_BUFFER
387 select ST_UVIS25_I2C if (I2C)
388 select ST_UVIS25_SPI if (SPI_MASTER)
389 help
390 Say yes here to build support for STMicroelectronics UVIS25
391 uv sensor
392
393 To compile this driver as a module, choose M here: the module
394 will be called st_uvis25.
395
396config ST_UVIS25_I2C
397 tristate
398 depends on ST_UVIS25
399 select REGMAP_I2C
400
401config ST_UVIS25_SPI
402 tristate
403 depends on ST_UVIS25
404 select REGMAP_SPI
405
406config TCS3414
407 tristate "TAOS TCS3414 digital color sensor"
408 depends on I2C
409 select IIO_BUFFER
410 select IIO_TRIGGERED_BUFFER
411 help
412 If you say yes here you get support for the TAOS TCS3414
413 family of digital color sensors.
414
415 This driver can also be built as a module. If so, the module
416 will be called tcs3414.
417
418config TCS3472
419 tristate "TAOS TCS3472 color light-to-digital converter"
420 depends on I2C
421 select IIO_BUFFER
422 select IIO_TRIGGERED_BUFFER
423 help
424 If you say yes here you get support for the TAOS TCS3472
425 family of color light-to-digital converters with IR filter.
426
427 This driver can also be built as a module. If so, the module
428 will be called tcs3472.
429
430config SENSORS_TSL2563
431 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
432 depends on I2C
433 help
434 If you say yes here you get support for the Taos TSL2560,
435 TSL2561, TSL2562 and TSL2563 ambient light sensors.
436
437 This driver can also be built as a module. If so, the module
438 will be called tsl2563.
439
440config TSL2583
441 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
442 depends on I2C
443 help
444 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
445 Access ALS data via iio, sysfs.
446
447config TSL2772
448 tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors"
449 depends on I2C
450 help
451 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672,
452 tmd2672, tsl2772, tmd2772 devices.
453 Provides iio_events and direct access via sysfs.
454
455config TSL4531
456 tristate "TAOS TSL4531 ambient light sensors"
457 depends on I2C
458 help
459 Say Y here if you want to build a driver for the TAOS TSL4531 family
460 of ambient light sensors with direct lux output.
461
462 To compile this driver as a module, choose M here: the
463 module will be called tsl4531.
464
465config US5182D
466 tristate "UPISEMI light and proximity sensor"
467 depends on I2C
468 help
469 If you say yes here you get support for the UPISEMI US5182D
470 ambient light and proximity sensor.
471
472 This driver can also be built as a module. If so, the module
473 will be called us5182d.
474
475config VCNL4000
476 tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor"
477 depends on I2C
478 help
479 Say Y here if you want to build a driver for the Vishay VCNL4000,
480 VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity
481 sensor.
482
483 To compile this driver as a module, choose M here: the
484 module will be called vcnl4000.
485
486config VCNL4035
487 tristate "VCNL4035 combined ALS and proximity sensor"
488 select IIO_TRIGGERED_BUFFER
489 select REGMAP_I2C
490 depends on I2C
491 help
492 Say Y here if you want to build a driver for the Vishay VCNL4035,
493 combined ambient light (ALS) and proximity sensor. Currently only ALS
494 function is available.
495
496 To compile this driver as a module, choose M here: the
497 module will be called vcnl4035.
498
499config VEML6070
500 tristate "VEML6070 UV A light sensor"
501 depends on I2C
502 help
503 Say Y here if you want to build a driver for the Vishay VEML6070 UV A
504 light sensor.
505
506 To compile this driver as a module, choose M here: the
507 module will be called veml6070.
508
509config VL6180
510 tristate "VL6180 ALS, range and proximity sensor"
511 depends on I2C
512 help
513 Say Y here if you want to build a driver for the STMicroelectronics
514 VL6180 combined ambient light, range and proximity sensor.
515
516 To compile this driver as a module, choose M here: the
517 module will be called vl6180.
518
519config ZOPT2201
520 tristate "ZOPT2201 ALS and UV B sensor"
521 depends on I2C
522 help
523 Say Y here if you want to build a driver for the IDT
524 ZOPT2201 ambient light and UV B sensor.
525
526 To compile this driver as a module, choose M here: the
527 module will be called zopt2201.
528
529endmenu