Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * Copyright (c) 2017, Microchip Technology Inc.
4 * Author: Tudor Ambarus <tudor.ambarus@microchip.com>
5 */
6
7#ifndef __ATMEL_I2C_H__
8#define __ATMEL_I2C_H__
9
10#include <linux/hw_random.h>
11#include <linux/types.h>
12
13#define ATMEL_ECC_PRIORITY 300
14
15#define COMMAND 0x03 /* packet function */
16#define SLEEP_TOKEN 0x01
17#define WAKE_TOKEN_MAX_SIZE 8
18
19/* Definitions of Data and Command sizes */
20#define WORD_ADDR_SIZE 1
21#define COUNT_SIZE 1
22#define CRC_SIZE 2
23#define CMD_OVERHEAD_SIZE (COUNT_SIZE + CRC_SIZE)
24
25/* size in bytes of the n prime */
26#define ATMEL_ECC_NIST_P256_N_SIZE 32
27#define ATMEL_ECC_PUBKEY_SIZE (2 * ATMEL_ECC_NIST_P256_N_SIZE)
28
29#define STATUS_RSP_SIZE 4
30#define ECDH_RSP_SIZE (32 + CMD_OVERHEAD_SIZE)
31#define GENKEY_RSP_SIZE (ATMEL_ECC_PUBKEY_SIZE + \
32 CMD_OVERHEAD_SIZE)
33#define READ_RSP_SIZE (4 + CMD_OVERHEAD_SIZE)
34#define RANDOM_RSP_SIZE (32 + CMD_OVERHEAD_SIZE)
35#define MAX_RSP_SIZE GENKEY_RSP_SIZE
36
37/**
38 * atmel_i2c_cmd - structure used for communicating with the device.
39 * @word_addr: indicates the function of the packet sent to the device. This
40 * byte should have a value of COMMAND for normal operation.
41 * @count : number of bytes to be transferred to (or from) the device.
42 * @opcode : the command code.
43 * @param1 : the first parameter; always present.
44 * @param2 : the second parameter; always present.
45 * @data : optional remaining input data. Includes a 2-byte CRC.
46 * @rxsize : size of the data received from i2c client.
47 * @msecs : command execution time in milliseconds
48 */
49struct atmel_i2c_cmd {
50 u8 word_addr;
51 u8 count;
52 u8 opcode;
53 u8 param1;
54 __le16 param2;
55 u8 data[MAX_RSP_SIZE];
56 u8 msecs;
57 u16 rxsize;
58} __packed;
59
60/* Status/Error codes */
61#define STATUS_SIZE 0x04
62#define STATUS_NOERR 0x00
63#define STATUS_WAKE_SUCCESSFUL 0x11
64
65/* Definitions for eeprom organization */
66#define CONFIG_ZONE 0
67
68/* Definitions for Indexes common to all commands */
69#define RSP_DATA_IDX 1 /* buffer index of data in response */
70#define DATA_SLOT_2 2 /* used for ECDH private key */
71
72/* Definitions for the device lock state */
73#define DEVICE_LOCK_ADDR 0x15
74#define LOCK_VALUE_IDX (RSP_DATA_IDX + 2)
75#define LOCK_CONFIG_IDX (RSP_DATA_IDX + 3)
76
77/*
78 * Wake High delay to data communication (microseconds). SDA should be stable
79 * high for this entire duration.
80 */
81#define TWHI_MIN 1500
82#define TWHI_MAX 1550
83
84/* Wake Low duration */
85#define TWLO_USEC 60
86
87/* Command execution time (milliseconds) */
88#define MAX_EXEC_TIME_ECDH 58
89#define MAX_EXEC_TIME_GENKEY 115
90#define MAX_EXEC_TIME_READ 1
91#define MAX_EXEC_TIME_RANDOM 50
92
93/* Command opcode */
94#define OPCODE_ECDH 0x43
95#define OPCODE_GENKEY 0x40
96#define OPCODE_READ 0x02
97#define OPCODE_RANDOM 0x1b
98
99/* Definitions for the READ Command */
100#define READ_COUNT 7
101
102/* Definitions for the RANDOM Command */
103#define RANDOM_COUNT 7
104
105/* Definitions for the GenKey Command */
106#define GENKEY_COUNT 7
107#define GENKEY_MODE_PRIVATE 0x04
108
109/* Definitions for the ECDH Command */
110#define ECDH_COUNT 71
111#define ECDH_PREFIX_MODE 0x00
112
113/* Used for binding tfm objects to i2c clients. */
114struct atmel_ecc_driver_data {
115 struct list_head i2c_client_list;
116 spinlock_t i2c_list_lock;
117} ____cacheline_aligned;
118
119/**
120 * atmel_i2c_client_priv - i2c_client private data
121 * @client : pointer to i2c client device
122 * @i2c_client_list_node: part of i2c_client_list
123 * @lock : lock for sending i2c commands
124 * @wake_token : wake token array of zeros
125 * @wake_token_sz : size in bytes of the wake_token
126 * @tfm_count : number of active crypto transformations on i2c client
127 *
128 * Reads and writes from/to the i2c client are sequential. The first byte
129 * transmitted to the device is treated as the byte size. Any attempt to send
130 * more than this number of bytes will cause the device to not ACK those bytes.
131 * After the host writes a single command byte to the input buffer, reads are
132 * prohibited until after the device completes command execution. Use a mutex
133 * when sending i2c commands.
134 */
135struct atmel_i2c_client_priv {
136 struct i2c_client *client;
137 struct list_head i2c_client_list_node;
138 struct mutex lock;
139 u8 wake_token[WAKE_TOKEN_MAX_SIZE];
140 size_t wake_token_sz;
141 atomic_t tfm_count ____cacheline_aligned;
142 struct hwrng hwrng;
143};
144
145/**
146 * atmel_i2c_work_data - data structure representing the work
147 * @ctx : transformation context.
148 * @cbk : pointer to a callback function to be invoked upon completion of this
149 * request. This has the form:
150 * callback(struct atmel_i2c_work_data *work_data, void *areq, u8 status)
151 * where:
152 * @work_data: data structure representing the work
153 * @areq : optional pointer to an argument passed with the original
154 * request.
155 * @status : status returned from the i2c client device or i2c error.
156 * @areq: optional pointer to a user argument for use at callback time.
157 * @work: describes the task to be executed.
158 * @cmd : structure used for communicating with the device.
159 */
160struct atmel_i2c_work_data {
161 void *ctx;
162 struct i2c_client *client;
163 void (*cbk)(struct atmel_i2c_work_data *work_data, void *areq,
164 int status);
165 void *areq;
166 struct work_struct work;
167 struct atmel_i2c_cmd cmd;
168};
169
170int atmel_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id);
171
172void atmel_i2c_enqueue(struct atmel_i2c_work_data *work_data,
173 void (*cbk)(struct atmel_i2c_work_data *work_data,
174 void *areq, int status),
175 void *areq);
176
177int atmel_i2c_send_receive(struct i2c_client *client, struct atmel_i2c_cmd *cmd);
178
179void atmel_i2c_init_read_cmd(struct atmel_i2c_cmd *cmd);
180void atmel_i2c_init_random_cmd(struct atmel_i2c_cmd *cmd);
181void atmel_i2c_init_genkey_cmd(struct atmel_i2c_cmd *cmd, u16 keyid);
182int atmel_i2c_init_ecdh_cmd(struct atmel_i2c_cmd *cmd,
183 struct scatterlist *pubkey);
184
185#endif /* __ATMEL_I2C_H__ */