Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 1991, 1992 Linus Torvalds
4 */
5
6/*
7 * 'tty_io.c' gives an orthogonal feeling to tty's, be they consoles
8 * or rs-channels. It also implements echoing, cooked mode etc.
9 *
10 * Kill-line thanks to John T Kohl, who also corrected VMIN = VTIME = 0.
11 *
12 * Modified by Theodore Ts'o, 9/14/92, to dynamically allocate the
13 * tty_struct and tty_queue structures. Previously there was an array
14 * of 256 tty_struct's which was statically allocated, and the
15 * tty_queue structures were allocated at boot time. Both are now
16 * dynamically allocated only when the tty is open.
17 *
18 * Also restructured routines so that there is more of a separation
19 * between the high-level tty routines (tty_io.c and tty_ioctl.c) and
20 * the low-level tty routines (serial.c, pty.c, console.c). This
21 * makes for cleaner and more compact code. -TYT, 9/17/92
22 *
23 * Modified by Fred N. van Kempen, 01/29/93, to add line disciplines
24 * which can be dynamically activated and de-activated by the line
25 * discipline handling modules (like SLIP).
26 *
27 * NOTE: pay no attention to the line discipline code (yet); its
28 * interface is still subject to change in this version...
29 * -- TYT, 1/31/92
30 *
31 * Added functionality to the OPOST tty handling. No delays, but all
32 * other bits should be there.
33 * -- Nick Holloway <alfie@dcs.warwick.ac.uk>, 27th May 1993.
34 *
35 * Rewrote canonical mode and added more termios flags.
36 * -- julian@uhunix.uhcc.hawaii.edu (J. Cowley), 13Jan94
37 *
38 * Reorganized FASYNC support so mouse code can share it.
39 * -- ctm@ardi.com, 9Sep95
40 *
41 * New TIOCLINUX variants added.
42 * -- mj@k332.feld.cvut.cz, 19-Nov-95
43 *
44 * Restrict vt switching via ioctl()
45 * -- grif@cs.ucr.edu, 5-Dec-95
46 *
47 * Move console and virtual terminal code to more appropriate files,
48 * implement CONFIG_VT and generalize console device interface.
49 * -- Marko Kohtala <Marko.Kohtala@hut.fi>, March 97
50 *
51 * Rewrote tty_init_dev and tty_release_dev to eliminate races.
52 * -- Bill Hawes <whawes@star.net>, June 97
53 *
54 * Added devfs support.
55 * -- C. Scott Ananian <cananian@alumni.princeton.edu>, 13-Jan-1998
56 *
57 * Added support for a Unix98-style ptmx device.
58 * -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998
59 *
60 * Reduced memory usage for older ARM systems
61 * -- Russell King <rmk@arm.linux.org.uk>
62 *
63 * Move do_SAK() into process context. Less stack use in devfs functions.
64 * alloc_tty_struct() always uses kmalloc()
65 * -- Andrew Morton <andrewm@uow.edu.eu> 17Mar01
66 */
67
68#include <linux/types.h>
69#include <linux/major.h>
70#include <linux/errno.h>
71#include <linux/signal.h>
72#include <linux/fcntl.h>
73#include <linux/sched/signal.h>
74#include <linux/sched/task.h>
75#include <linux/interrupt.h>
76#include <linux/tty.h>
77#include <linux/tty_driver.h>
78#include <linux/tty_flip.h>
79#include <linux/devpts_fs.h>
80#include <linux/file.h>
81#include <linux/fdtable.h>
82#include <linux/console.h>
83#include <linux/timer.h>
84#include <linux/ctype.h>
85#include <linux/kd.h>
86#include <linux/mm.h>
87#include <linux/string.h>
88#include <linux/slab.h>
89#include <linux/poll.h>
90#include <linux/proc_fs.h>
91#include <linux/init.h>
92#include <linux/module.h>
93#include <linux/device.h>
94#include <linux/wait.h>
95#include <linux/bitops.h>
96#include <linux/delay.h>
97#include <linux/seq_file.h>
98#include <linux/serial.h>
99#include <linux/ratelimit.h>
100#include <linux/compat.h>
101
102#include <linux/uaccess.h>
103
104#include <linux/kbd_kern.h>
105#include <linux/vt_kern.h>
106#include <linux/selection.h>
107
108#include <linux/kmod.h>
109#include <linux/nsproxy.h>
110
111#undef TTY_DEBUG_HANGUP
112#ifdef TTY_DEBUG_HANGUP
113# define tty_debug_hangup(tty, f, args...) tty_debug(tty, f, ##args)
114#else
115# define tty_debug_hangup(tty, f, args...) do { } while (0)
116#endif
117
118#define TTY_PARANOIA_CHECK 1
119#define CHECK_TTY_COUNT 1
120
121struct ktermios tty_std_termios = { /* for the benefit of tty drivers */
122 .c_iflag = ICRNL | IXON,
123 .c_oflag = OPOST | ONLCR,
124 .c_cflag = B38400 | CS8 | CREAD | HUPCL,
125 .c_lflag = ISIG | ICANON | ECHO | ECHOE | ECHOK |
126 ECHOCTL | ECHOKE | IEXTEN,
127 .c_cc = INIT_C_CC,
128 .c_ispeed = 38400,
129 .c_ospeed = 38400,
130 /* .c_line = N_TTY, */
131};
132
133EXPORT_SYMBOL(tty_std_termios);
134
135/* This list gets poked at by procfs and various bits of boot up code. This
136 could do with some rationalisation such as pulling the tty proc function
137 into this file */
138
139LIST_HEAD(tty_drivers); /* linked list of tty drivers */
140
141/* Mutex to protect creating and releasing a tty */
142DEFINE_MUTEX(tty_mutex);
143
144static ssize_t tty_read(struct file *, char __user *, size_t, loff_t *);
145static ssize_t tty_write(struct file *, const char __user *, size_t, loff_t *);
146ssize_t redirected_tty_write(struct file *, const char __user *,
147 size_t, loff_t *);
148static __poll_t tty_poll(struct file *, poll_table *);
149static int tty_open(struct inode *, struct file *);
150long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
151#ifdef CONFIG_COMPAT
152static long tty_compat_ioctl(struct file *file, unsigned int cmd,
153 unsigned long arg);
154#else
155#define tty_compat_ioctl NULL
156#endif
157static int __tty_fasync(int fd, struct file *filp, int on);
158static int tty_fasync(int fd, struct file *filp, int on);
159static void release_tty(struct tty_struct *tty, int idx);
160
161/**
162 * free_tty_struct - free a disused tty
163 * @tty: tty struct to free
164 *
165 * Free the write buffers, tty queue and tty memory itself.
166 *
167 * Locking: none. Must be called after tty is definitely unused
168 */
169
170static void free_tty_struct(struct tty_struct *tty)
171{
172 tty_ldisc_deinit(tty);
173 put_device(tty->dev);
174 kfree(tty->write_buf);
175 tty->magic = 0xDEADDEAD;
176 kfree(tty);
177}
178
179static inline struct tty_struct *file_tty(struct file *file)
180{
181 return ((struct tty_file_private *)file->private_data)->tty;
182}
183
184int tty_alloc_file(struct file *file)
185{
186 struct tty_file_private *priv;
187
188 priv = kmalloc(sizeof(*priv), GFP_KERNEL);
189 if (!priv)
190 return -ENOMEM;
191
192 file->private_data = priv;
193
194 return 0;
195}
196
197/* Associate a new file with the tty structure */
198void tty_add_file(struct tty_struct *tty, struct file *file)
199{
200 struct tty_file_private *priv = file->private_data;
201
202 priv->tty = tty;
203 priv->file = file;
204
205 spin_lock(&tty->files_lock);
206 list_add(&priv->list, &tty->tty_files);
207 spin_unlock(&tty->files_lock);
208}
209
210/**
211 * tty_free_file - free file->private_data
212 *
213 * This shall be used only for fail path handling when tty_add_file was not
214 * called yet.
215 */
216void tty_free_file(struct file *file)
217{
218 struct tty_file_private *priv = file->private_data;
219
220 file->private_data = NULL;
221 kfree(priv);
222}
223
224/* Delete file from its tty */
225static void tty_del_file(struct file *file)
226{
227 struct tty_file_private *priv = file->private_data;
228 struct tty_struct *tty = priv->tty;
229
230 spin_lock(&tty->files_lock);
231 list_del(&priv->list);
232 spin_unlock(&tty->files_lock);
233 tty_free_file(file);
234}
235
236/**
237 * tty_name - return tty naming
238 * @tty: tty structure
239 *
240 * Convert a tty structure into a name. The name reflects the kernel
241 * naming policy and if udev is in use may not reflect user space
242 *
243 * Locking: none
244 */
245
246const char *tty_name(const struct tty_struct *tty)
247{
248 if (!tty) /* Hmm. NULL pointer. That's fun. */
249 return "NULL tty";
250 return tty->name;
251}
252
253EXPORT_SYMBOL(tty_name);
254
255const char *tty_driver_name(const struct tty_struct *tty)
256{
257 if (!tty || !tty->driver)
258 return "";
259 return tty->driver->name;
260}
261
262static int tty_paranoia_check(struct tty_struct *tty, struct inode *inode,
263 const char *routine)
264{
265#ifdef TTY_PARANOIA_CHECK
266 if (!tty) {
267 pr_warn("(%d:%d): %s: NULL tty\n",
268 imajor(inode), iminor(inode), routine);
269 return 1;
270 }
271 if (tty->magic != TTY_MAGIC) {
272 pr_warn("(%d:%d): %s: bad magic number\n",
273 imajor(inode), iminor(inode), routine);
274 return 1;
275 }
276#endif
277 return 0;
278}
279
280/* Caller must hold tty_lock */
281static int check_tty_count(struct tty_struct *tty, const char *routine)
282{
283#ifdef CHECK_TTY_COUNT
284 struct list_head *p;
285 int count = 0, kopen_count = 0;
286
287 spin_lock(&tty->files_lock);
288 list_for_each(p, &tty->tty_files) {
289 count++;
290 }
291 spin_unlock(&tty->files_lock);
292 if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
293 tty->driver->subtype == PTY_TYPE_SLAVE &&
294 tty->link && tty->link->count)
295 count++;
296 if (tty_port_kopened(tty->port))
297 kopen_count++;
298 if (tty->count != (count + kopen_count)) {
299 tty_warn(tty, "%s: tty->count(%d) != (#fd's(%d) + #kopen's(%d))\n",
300 routine, tty->count, count, kopen_count);
301 return (count + kopen_count);
302 }
303#endif
304 return 0;
305}
306
307/**
308 * get_tty_driver - find device of a tty
309 * @dev_t: device identifier
310 * @index: returns the index of the tty
311 *
312 * This routine returns a tty driver structure, given a device number
313 * and also passes back the index number.
314 *
315 * Locking: caller must hold tty_mutex
316 */
317
318static struct tty_driver *get_tty_driver(dev_t device, int *index)
319{
320 struct tty_driver *p;
321
322 list_for_each_entry(p, &tty_drivers, tty_drivers) {
323 dev_t base = MKDEV(p->major, p->minor_start);
324 if (device < base || device >= base + p->num)
325 continue;
326 *index = device - base;
327 return tty_driver_kref_get(p);
328 }
329 return NULL;
330}
331
332/**
333 * tty_dev_name_to_number - return dev_t for device name
334 * @name: user space name of device under /dev
335 * @number: pointer to dev_t that this function will populate
336 *
337 * This function converts device names like ttyS0 or ttyUSB1 into dev_t
338 * like (4, 64) or (188, 1). If no corresponding driver is registered then
339 * the function returns -ENODEV.
340 *
341 * Locking: this acquires tty_mutex to protect the tty_drivers list from
342 * being modified while we are traversing it, and makes sure to
343 * release it before exiting.
344 */
345int tty_dev_name_to_number(const char *name, dev_t *number)
346{
347 struct tty_driver *p;
348 int ret;
349 int index, prefix_length = 0;
350 const char *str;
351
352 for (str = name; *str && !isdigit(*str); str++)
353 ;
354
355 if (!*str)
356 return -EINVAL;
357
358 ret = kstrtoint(str, 10, &index);
359 if (ret)
360 return ret;
361
362 prefix_length = str - name;
363 mutex_lock(&tty_mutex);
364
365 list_for_each_entry(p, &tty_drivers, tty_drivers)
366 if (prefix_length == strlen(p->name) && strncmp(name,
367 p->name, prefix_length) == 0) {
368 if (index < p->num) {
369 *number = MKDEV(p->major, p->minor_start + index);
370 goto out;
371 }
372 }
373
374 /* if here then driver wasn't found */
375 ret = -ENODEV;
376out:
377 mutex_unlock(&tty_mutex);
378 return ret;
379}
380EXPORT_SYMBOL_GPL(tty_dev_name_to_number);
381
382#ifdef CONFIG_CONSOLE_POLL
383
384/**
385 * tty_find_polling_driver - find device of a polled tty
386 * @name: name string to match
387 * @line: pointer to resulting tty line nr
388 *
389 * This routine returns a tty driver structure, given a name
390 * and the condition that the tty driver is capable of polled
391 * operation.
392 */
393struct tty_driver *tty_find_polling_driver(char *name, int *line)
394{
395 struct tty_driver *p, *res = NULL;
396 int tty_line = 0;
397 int len;
398 char *str, *stp;
399
400 for (str = name; *str; str++)
401 if ((*str >= '0' && *str <= '9') || *str == ',')
402 break;
403 if (!*str)
404 return NULL;
405
406 len = str - name;
407 tty_line = simple_strtoul(str, &str, 10);
408
409 mutex_lock(&tty_mutex);
410 /* Search through the tty devices to look for a match */
411 list_for_each_entry(p, &tty_drivers, tty_drivers) {
412 if (!len || strncmp(name, p->name, len) != 0)
413 continue;
414 stp = str;
415 if (*stp == ',')
416 stp++;
417 if (*stp == '\0')
418 stp = NULL;
419
420 if (tty_line >= 0 && tty_line < p->num && p->ops &&
421 p->ops->poll_init && !p->ops->poll_init(p, tty_line, stp)) {
422 res = tty_driver_kref_get(p);
423 *line = tty_line;
424 break;
425 }
426 }
427 mutex_unlock(&tty_mutex);
428
429 return res;
430}
431EXPORT_SYMBOL_GPL(tty_find_polling_driver);
432#endif
433
434static ssize_t hung_up_tty_read(struct file *file, char __user *buf,
435 size_t count, loff_t *ppos)
436{
437 return 0;
438}
439
440static ssize_t hung_up_tty_write(struct file *file, const char __user *buf,
441 size_t count, loff_t *ppos)
442{
443 return -EIO;
444}
445
446/* No kernel lock held - none needed ;) */
447static __poll_t hung_up_tty_poll(struct file *filp, poll_table *wait)
448{
449 return EPOLLIN | EPOLLOUT | EPOLLERR | EPOLLHUP | EPOLLRDNORM | EPOLLWRNORM;
450}
451
452static long hung_up_tty_ioctl(struct file *file, unsigned int cmd,
453 unsigned long arg)
454{
455 return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
456}
457
458static long hung_up_tty_compat_ioctl(struct file *file,
459 unsigned int cmd, unsigned long arg)
460{
461 return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
462}
463
464static int hung_up_tty_fasync(int fd, struct file *file, int on)
465{
466 return -ENOTTY;
467}
468
469static void tty_show_fdinfo(struct seq_file *m, struct file *file)
470{
471 struct tty_struct *tty = file_tty(file);
472
473 if (tty && tty->ops && tty->ops->show_fdinfo)
474 tty->ops->show_fdinfo(tty, m);
475}
476
477static const struct file_operations tty_fops = {
478 .llseek = no_llseek,
479 .read = tty_read,
480 .write = tty_write,
481 .poll = tty_poll,
482 .unlocked_ioctl = tty_ioctl,
483 .compat_ioctl = tty_compat_ioctl,
484 .open = tty_open,
485 .release = tty_release,
486 .fasync = tty_fasync,
487 .show_fdinfo = tty_show_fdinfo,
488};
489
490static const struct file_operations console_fops = {
491 .llseek = no_llseek,
492 .read = tty_read,
493 .write = redirected_tty_write,
494 .poll = tty_poll,
495 .unlocked_ioctl = tty_ioctl,
496 .compat_ioctl = tty_compat_ioctl,
497 .open = tty_open,
498 .release = tty_release,
499 .fasync = tty_fasync,
500};
501
502static const struct file_operations hung_up_tty_fops = {
503 .llseek = no_llseek,
504 .read = hung_up_tty_read,
505 .write = hung_up_tty_write,
506 .poll = hung_up_tty_poll,
507 .unlocked_ioctl = hung_up_tty_ioctl,
508 .compat_ioctl = hung_up_tty_compat_ioctl,
509 .release = tty_release,
510 .fasync = hung_up_tty_fasync,
511};
512
513static DEFINE_SPINLOCK(redirect_lock);
514static struct file *redirect;
515
516extern void tty_sysctl_init(void);
517
518/**
519 * tty_wakeup - request more data
520 * @tty: terminal
521 *
522 * Internal and external helper for wakeups of tty. This function
523 * informs the line discipline if present that the driver is ready
524 * to receive more output data.
525 */
526
527void tty_wakeup(struct tty_struct *tty)
528{
529 struct tty_ldisc *ld;
530
531 if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) {
532 ld = tty_ldisc_ref(tty);
533 if (ld) {
534 if (ld->ops->write_wakeup)
535 ld->ops->write_wakeup(tty);
536 tty_ldisc_deref(ld);
537 }
538 }
539 wake_up_interruptible_poll(&tty->write_wait, EPOLLOUT);
540}
541
542EXPORT_SYMBOL_GPL(tty_wakeup);
543
544/**
545 * __tty_hangup - actual handler for hangup events
546 * @work: tty device
547 *
548 * This can be called by a "kworker" kernel thread. That is process
549 * synchronous but doesn't hold any locks, so we need to make sure we
550 * have the appropriate locks for what we're doing.
551 *
552 * The hangup event clears any pending redirections onto the hung up
553 * device. It ensures future writes will error and it does the needed
554 * line discipline hangup and signal delivery. The tty object itself
555 * remains intact.
556 *
557 * Locking:
558 * BTM
559 * redirect lock for undoing redirection
560 * file list lock for manipulating list of ttys
561 * tty_ldiscs_lock from called functions
562 * termios_rwsem resetting termios data
563 * tasklist_lock to walk task list for hangup event
564 * ->siglock to protect ->signal/->sighand
565 */
566static void __tty_hangup(struct tty_struct *tty, int exit_session)
567{
568 struct file *cons_filp = NULL;
569 struct file *filp, *f = NULL;
570 struct tty_file_private *priv;
571 int closecount = 0, n;
572 int refs;
573
574 if (!tty)
575 return;
576
577
578 spin_lock(&redirect_lock);
579 if (redirect && file_tty(redirect) == tty) {
580 f = redirect;
581 redirect = NULL;
582 }
583 spin_unlock(&redirect_lock);
584
585 tty_lock(tty);
586
587 if (test_bit(TTY_HUPPED, &tty->flags)) {
588 tty_unlock(tty);
589 return;
590 }
591
592 /*
593 * Some console devices aren't actually hung up for technical and
594 * historical reasons, which can lead to indefinite interruptible
595 * sleep in n_tty_read(). The following explicitly tells
596 * n_tty_read() to abort readers.
597 */
598 set_bit(TTY_HUPPING, &tty->flags);
599
600 /* inuse_filps is protected by the single tty lock,
601 this really needs to change if we want to flush the
602 workqueue with the lock held */
603 check_tty_count(tty, "tty_hangup");
604
605 spin_lock(&tty->files_lock);
606 /* This breaks for file handles being sent over AF_UNIX sockets ? */
607 list_for_each_entry(priv, &tty->tty_files, list) {
608 filp = priv->file;
609 if (filp->f_op->write == redirected_tty_write)
610 cons_filp = filp;
611 if (filp->f_op->write != tty_write)
612 continue;
613 closecount++;
614 __tty_fasync(-1, filp, 0); /* can't block */
615 filp->f_op = &hung_up_tty_fops;
616 }
617 spin_unlock(&tty->files_lock);
618
619 refs = tty_signal_session_leader(tty, exit_session);
620 /* Account for the p->signal references we killed */
621 while (refs--)
622 tty_kref_put(tty);
623
624 tty_ldisc_hangup(tty, cons_filp != NULL);
625
626 spin_lock_irq(&tty->ctrl_lock);
627 clear_bit(TTY_THROTTLED, &tty->flags);
628 clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
629 put_pid(tty->session);
630 put_pid(tty->pgrp);
631 tty->session = NULL;
632 tty->pgrp = NULL;
633 tty->ctrl_status = 0;
634 spin_unlock_irq(&tty->ctrl_lock);
635
636 /*
637 * If one of the devices matches a console pointer, we
638 * cannot just call hangup() because that will cause
639 * tty->count and state->count to go out of sync.
640 * So we just call close() the right number of times.
641 */
642 if (cons_filp) {
643 if (tty->ops->close)
644 for (n = 0; n < closecount; n++)
645 tty->ops->close(tty, cons_filp);
646 } else if (tty->ops->hangup)
647 tty->ops->hangup(tty);
648 /*
649 * We don't want to have driver/ldisc interactions beyond the ones
650 * we did here. The driver layer expects no calls after ->hangup()
651 * from the ldisc side, which is now guaranteed.
652 */
653 set_bit(TTY_HUPPED, &tty->flags);
654 clear_bit(TTY_HUPPING, &tty->flags);
655 tty_unlock(tty);
656
657 if (f)
658 fput(f);
659}
660
661static void do_tty_hangup(struct work_struct *work)
662{
663 struct tty_struct *tty =
664 container_of(work, struct tty_struct, hangup_work);
665
666 __tty_hangup(tty, 0);
667}
668
669/**
670 * tty_hangup - trigger a hangup event
671 * @tty: tty to hangup
672 *
673 * A carrier loss (virtual or otherwise) has occurred on this like
674 * schedule a hangup sequence to run after this event.
675 */
676
677void tty_hangup(struct tty_struct *tty)
678{
679 tty_debug_hangup(tty, "hangup\n");
680 schedule_work(&tty->hangup_work);
681}
682
683EXPORT_SYMBOL(tty_hangup);
684
685/**
686 * tty_vhangup - process vhangup
687 * @tty: tty to hangup
688 *
689 * The user has asked via system call for the terminal to be hung up.
690 * We do this synchronously so that when the syscall returns the process
691 * is complete. That guarantee is necessary for security reasons.
692 */
693
694void tty_vhangup(struct tty_struct *tty)
695{
696 tty_debug_hangup(tty, "vhangup\n");
697 __tty_hangup(tty, 0);
698}
699
700EXPORT_SYMBOL(tty_vhangup);
701
702
703/**
704 * tty_vhangup_self - process vhangup for own ctty
705 *
706 * Perform a vhangup on the current controlling tty
707 */
708
709void tty_vhangup_self(void)
710{
711 struct tty_struct *tty;
712
713 tty = get_current_tty();
714 if (tty) {
715 tty_vhangup(tty);
716 tty_kref_put(tty);
717 }
718}
719
720/**
721 * tty_vhangup_session - hangup session leader exit
722 * @tty: tty to hangup
723 *
724 * The session leader is exiting and hanging up its controlling terminal.
725 * Every process in the foreground process group is signalled SIGHUP.
726 *
727 * We do this synchronously so that when the syscall returns the process
728 * is complete. That guarantee is necessary for security reasons.
729 */
730
731void tty_vhangup_session(struct tty_struct *tty)
732{
733 tty_debug_hangup(tty, "session hangup\n");
734 __tty_hangup(tty, 1);
735}
736
737/**
738 * tty_hung_up_p - was tty hung up
739 * @filp: file pointer of tty
740 *
741 * Return true if the tty has been subject to a vhangup or a carrier
742 * loss
743 */
744
745int tty_hung_up_p(struct file *filp)
746{
747 return (filp && filp->f_op == &hung_up_tty_fops);
748}
749
750EXPORT_SYMBOL(tty_hung_up_p);
751
752/**
753 * stop_tty - propagate flow control
754 * @tty: tty to stop
755 *
756 * Perform flow control to the driver. May be called
757 * on an already stopped device and will not re-call the driver
758 * method.
759 *
760 * This functionality is used by both the line disciplines for
761 * halting incoming flow and by the driver. It may therefore be
762 * called from any context, may be under the tty atomic_write_lock
763 * but not always.
764 *
765 * Locking:
766 * flow_lock
767 */
768
769void __stop_tty(struct tty_struct *tty)
770{
771 if (tty->stopped)
772 return;
773 tty->stopped = 1;
774 if (tty->ops->stop)
775 tty->ops->stop(tty);
776}
777
778void stop_tty(struct tty_struct *tty)
779{
780 unsigned long flags;
781
782 spin_lock_irqsave(&tty->flow_lock, flags);
783 __stop_tty(tty);
784 spin_unlock_irqrestore(&tty->flow_lock, flags);
785}
786EXPORT_SYMBOL(stop_tty);
787
788/**
789 * start_tty - propagate flow control
790 * @tty: tty to start
791 *
792 * Start a tty that has been stopped if at all possible. If this
793 * tty was previous stopped and is now being started, the driver
794 * start method is invoked and the line discipline woken.
795 *
796 * Locking:
797 * flow_lock
798 */
799
800void __start_tty(struct tty_struct *tty)
801{
802 if (!tty->stopped || tty->flow_stopped)
803 return;
804 tty->stopped = 0;
805 if (tty->ops->start)
806 tty->ops->start(tty);
807 tty_wakeup(tty);
808}
809
810void start_tty(struct tty_struct *tty)
811{
812 unsigned long flags;
813
814 spin_lock_irqsave(&tty->flow_lock, flags);
815 __start_tty(tty);
816 spin_unlock_irqrestore(&tty->flow_lock, flags);
817}
818EXPORT_SYMBOL(start_tty);
819
820static void tty_update_time(struct timespec64 *time)
821{
822 time64_t sec = ktime_get_real_seconds();
823
824 /*
825 * We only care if the two values differ in anything other than the
826 * lower three bits (i.e every 8 seconds). If so, then we can update
827 * the time of the tty device, otherwise it could be construded as a
828 * security leak to let userspace know the exact timing of the tty.
829 */
830 if ((sec ^ time->tv_sec) & ~7)
831 time->tv_sec = sec;
832}
833
834/**
835 * tty_read - read method for tty device files
836 * @file: pointer to tty file
837 * @buf: user buffer
838 * @count: size of user buffer
839 * @ppos: unused
840 *
841 * Perform the read system call function on this terminal device. Checks
842 * for hung up devices before calling the line discipline method.
843 *
844 * Locking:
845 * Locks the line discipline internally while needed. Multiple
846 * read calls may be outstanding in parallel.
847 */
848
849static ssize_t tty_read(struct file *file, char __user *buf, size_t count,
850 loff_t *ppos)
851{
852 int i;
853 struct inode *inode = file_inode(file);
854 struct tty_struct *tty = file_tty(file);
855 struct tty_ldisc *ld;
856
857 if (tty_paranoia_check(tty, inode, "tty_read"))
858 return -EIO;
859 if (!tty || tty_io_error(tty))
860 return -EIO;
861
862 /* We want to wait for the line discipline to sort out in this
863 situation */
864 ld = tty_ldisc_ref_wait(tty);
865 if (!ld)
866 return hung_up_tty_read(file, buf, count, ppos);
867 if (ld->ops->read)
868 i = ld->ops->read(tty, file, buf, count);
869 else
870 i = -EIO;
871 tty_ldisc_deref(ld);
872
873 if (i > 0)
874 tty_update_time(&inode->i_atime);
875
876 return i;
877}
878
879static void tty_write_unlock(struct tty_struct *tty)
880{
881 mutex_unlock(&tty->atomic_write_lock);
882 wake_up_interruptible_poll(&tty->write_wait, EPOLLOUT);
883}
884
885static int tty_write_lock(struct tty_struct *tty, int ndelay)
886{
887 if (!mutex_trylock(&tty->atomic_write_lock)) {
888 if (ndelay)
889 return -EAGAIN;
890 if (mutex_lock_interruptible(&tty->atomic_write_lock))
891 return -ERESTARTSYS;
892 }
893 return 0;
894}
895
896/*
897 * Split writes up in sane blocksizes to avoid
898 * denial-of-service type attacks
899 */
900static inline ssize_t do_tty_write(
901 ssize_t (*write)(struct tty_struct *, struct file *, const unsigned char *, size_t),
902 struct tty_struct *tty,
903 struct file *file,
904 const char __user *buf,
905 size_t count)
906{
907 ssize_t ret, written = 0;
908 unsigned int chunk;
909
910 ret = tty_write_lock(tty, file->f_flags & O_NDELAY);
911 if (ret < 0)
912 return ret;
913
914 /*
915 * We chunk up writes into a temporary buffer. This
916 * simplifies low-level drivers immensely, since they
917 * don't have locking issues and user mode accesses.
918 *
919 * But if TTY_NO_WRITE_SPLIT is set, we should use a
920 * big chunk-size..
921 *
922 * The default chunk-size is 2kB, because the NTTY
923 * layer has problems with bigger chunks. It will
924 * claim to be able to handle more characters than
925 * it actually does.
926 *
927 * FIXME: This can probably go away now except that 64K chunks
928 * are too likely to fail unless switched to vmalloc...
929 */
930 chunk = 2048;
931 if (test_bit(TTY_NO_WRITE_SPLIT, &tty->flags))
932 chunk = 65536;
933 if (count < chunk)
934 chunk = count;
935
936 /* write_buf/write_cnt is protected by the atomic_write_lock mutex */
937 if (tty->write_cnt < chunk) {
938 unsigned char *buf_chunk;
939
940 if (chunk < 1024)
941 chunk = 1024;
942
943 buf_chunk = kmalloc(chunk, GFP_KERNEL);
944 if (!buf_chunk) {
945 ret = -ENOMEM;
946 goto out;
947 }
948 kfree(tty->write_buf);
949 tty->write_cnt = chunk;
950 tty->write_buf = buf_chunk;
951 }
952
953 /* Do the write .. */
954 for (;;) {
955 size_t size = count;
956 if (size > chunk)
957 size = chunk;
958 ret = -EFAULT;
959 if (copy_from_user(tty->write_buf, buf, size))
960 break;
961 ret = write(tty, file, tty->write_buf, size);
962 if (ret <= 0)
963 break;
964 written += ret;
965 buf += ret;
966 count -= ret;
967 if (!count)
968 break;
969 ret = -ERESTARTSYS;
970 if (signal_pending(current))
971 break;
972 cond_resched();
973 }
974 if (written) {
975 tty_update_time(&file_inode(file)->i_mtime);
976 ret = written;
977 }
978out:
979 tty_write_unlock(tty);
980 return ret;
981}
982
983/**
984 * tty_write_message - write a message to a certain tty, not just the console.
985 * @tty: the destination tty_struct
986 * @msg: the message to write
987 *
988 * This is used for messages that need to be redirected to a specific tty.
989 * We don't put it into the syslog queue right now maybe in the future if
990 * really needed.
991 *
992 * We must still hold the BTM and test the CLOSING flag for the moment.
993 */
994
995void tty_write_message(struct tty_struct *tty, char *msg)
996{
997 if (tty) {
998 mutex_lock(&tty->atomic_write_lock);
999 tty_lock(tty);
1000 if (tty->ops->write && tty->count > 0)
1001 tty->ops->write(tty, msg, strlen(msg));
1002 tty_unlock(tty);
1003 tty_write_unlock(tty);
1004 }
1005 return;
1006}
1007
1008
1009/**
1010 * tty_write - write method for tty device file
1011 * @file: tty file pointer
1012 * @buf: user data to write
1013 * @count: bytes to write
1014 * @ppos: unused
1015 *
1016 * Write data to a tty device via the line discipline.
1017 *
1018 * Locking:
1019 * Locks the line discipline as required
1020 * Writes to the tty driver are serialized by the atomic_write_lock
1021 * and are then processed in chunks to the device. The line discipline
1022 * write method will not be invoked in parallel for each device.
1023 */
1024
1025static ssize_t tty_write(struct file *file, const char __user *buf,
1026 size_t count, loff_t *ppos)
1027{
1028 struct tty_struct *tty = file_tty(file);
1029 struct tty_ldisc *ld;
1030 ssize_t ret;
1031
1032 if (tty_paranoia_check(tty, file_inode(file), "tty_write"))
1033 return -EIO;
1034 if (!tty || !tty->ops->write || tty_io_error(tty))
1035 return -EIO;
1036 /* Short term debug to catch buggy drivers */
1037 if (tty->ops->write_room == NULL)
1038 tty_err(tty, "missing write_room method\n");
1039 ld = tty_ldisc_ref_wait(tty);
1040 if (!ld)
1041 return hung_up_tty_write(file, buf, count, ppos);
1042 if (!ld->ops->write)
1043 ret = -EIO;
1044 else
1045 ret = do_tty_write(ld->ops->write, tty, file, buf, count);
1046 tty_ldisc_deref(ld);
1047 return ret;
1048}
1049
1050ssize_t redirected_tty_write(struct file *file, const char __user *buf,
1051 size_t count, loff_t *ppos)
1052{
1053 struct file *p = NULL;
1054
1055 spin_lock(&redirect_lock);
1056 if (redirect)
1057 p = get_file(redirect);
1058 spin_unlock(&redirect_lock);
1059
1060 if (p) {
1061 ssize_t res;
1062 res = vfs_write(p, buf, count, &p->f_pos);
1063 fput(p);
1064 return res;
1065 }
1066 return tty_write(file, buf, count, ppos);
1067}
1068
1069/**
1070 * tty_send_xchar - send priority character
1071 *
1072 * Send a high priority character to the tty even if stopped
1073 *
1074 * Locking: none for xchar method, write ordering for write method.
1075 */
1076
1077int tty_send_xchar(struct tty_struct *tty, char ch)
1078{
1079 int was_stopped = tty->stopped;
1080
1081 if (tty->ops->send_xchar) {
1082 down_read(&tty->termios_rwsem);
1083 tty->ops->send_xchar(tty, ch);
1084 up_read(&tty->termios_rwsem);
1085 return 0;
1086 }
1087
1088 if (tty_write_lock(tty, 0) < 0)
1089 return -ERESTARTSYS;
1090
1091 down_read(&tty->termios_rwsem);
1092 if (was_stopped)
1093 start_tty(tty);
1094 tty->ops->write(tty, &ch, 1);
1095 if (was_stopped)
1096 stop_tty(tty);
1097 up_read(&tty->termios_rwsem);
1098 tty_write_unlock(tty);
1099 return 0;
1100}
1101
1102static char ptychar[] = "pqrstuvwxyzabcde";
1103
1104/**
1105 * pty_line_name - generate name for a pty
1106 * @driver: the tty driver in use
1107 * @index: the minor number
1108 * @p: output buffer of at least 6 bytes
1109 *
1110 * Generate a name from a driver reference and write it to the output
1111 * buffer.
1112 *
1113 * Locking: None
1114 */
1115static void pty_line_name(struct tty_driver *driver, int index, char *p)
1116{
1117 int i = index + driver->name_base;
1118 /* ->name is initialized to "ttyp", but "tty" is expected */
1119 sprintf(p, "%s%c%x",
1120 driver->subtype == PTY_TYPE_SLAVE ? "tty" : driver->name,
1121 ptychar[i >> 4 & 0xf], i & 0xf);
1122}
1123
1124/**
1125 * tty_line_name - generate name for a tty
1126 * @driver: the tty driver in use
1127 * @index: the minor number
1128 * @p: output buffer of at least 7 bytes
1129 *
1130 * Generate a name from a driver reference and write it to the output
1131 * buffer.
1132 *
1133 * Locking: None
1134 */
1135static ssize_t tty_line_name(struct tty_driver *driver, int index, char *p)
1136{
1137 if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE)
1138 return sprintf(p, "%s", driver->name);
1139 else
1140 return sprintf(p, "%s%d", driver->name,
1141 index + driver->name_base);
1142}
1143
1144/**
1145 * tty_driver_lookup_tty() - find an existing tty, if any
1146 * @driver: the driver for the tty
1147 * @idx: the minor number
1148 *
1149 * Return the tty, if found. If not found, return NULL or ERR_PTR() if the
1150 * driver lookup() method returns an error.
1151 *
1152 * Locking: tty_mutex must be held. If the tty is found, bump the tty kref.
1153 */
1154static struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver,
1155 struct file *file, int idx)
1156{
1157 struct tty_struct *tty;
1158
1159 if (driver->ops->lookup)
1160 if (!file)
1161 tty = ERR_PTR(-EIO);
1162 else
1163 tty = driver->ops->lookup(driver, file, idx);
1164 else
1165 tty = driver->ttys[idx];
1166
1167 if (!IS_ERR(tty))
1168 tty_kref_get(tty);
1169 return tty;
1170}
1171
1172/**
1173 * tty_init_termios - helper for termios setup
1174 * @tty: the tty to set up
1175 *
1176 * Initialise the termios structure for this tty. This runs under
1177 * the tty_mutex currently so we can be relaxed about ordering.
1178 */
1179
1180void tty_init_termios(struct tty_struct *tty)
1181{
1182 struct ktermios *tp;
1183 int idx = tty->index;
1184
1185 if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
1186 tty->termios = tty->driver->init_termios;
1187 else {
1188 /* Check for lazy saved data */
1189 tp = tty->driver->termios[idx];
1190 if (tp != NULL) {
1191 tty->termios = *tp;
1192 tty->termios.c_line = tty->driver->init_termios.c_line;
1193 } else
1194 tty->termios = tty->driver->init_termios;
1195 }
1196 /* Compatibility until drivers always set this */
1197 tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios);
1198 tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios);
1199}
1200EXPORT_SYMBOL_GPL(tty_init_termios);
1201
1202int tty_standard_install(struct tty_driver *driver, struct tty_struct *tty)
1203{
1204 tty_init_termios(tty);
1205 tty_driver_kref_get(driver);
1206 tty->count++;
1207 driver->ttys[tty->index] = tty;
1208 return 0;
1209}
1210EXPORT_SYMBOL_GPL(tty_standard_install);
1211
1212/**
1213 * tty_driver_install_tty() - install a tty entry in the driver
1214 * @driver: the driver for the tty
1215 * @tty: the tty
1216 *
1217 * Install a tty object into the driver tables. The tty->index field
1218 * will be set by the time this is called. This method is responsible
1219 * for ensuring any need additional structures are allocated and
1220 * configured.
1221 *
1222 * Locking: tty_mutex for now
1223 */
1224static int tty_driver_install_tty(struct tty_driver *driver,
1225 struct tty_struct *tty)
1226{
1227 return driver->ops->install ? driver->ops->install(driver, tty) :
1228 tty_standard_install(driver, tty);
1229}
1230
1231/**
1232 * tty_driver_remove_tty() - remove a tty from the driver tables
1233 * @driver: the driver for the tty
1234 * @idx: the minor number
1235 *
1236 * Remvoe a tty object from the driver tables. The tty->index field
1237 * will be set by the time this is called.
1238 *
1239 * Locking: tty_mutex for now
1240 */
1241static void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty)
1242{
1243 if (driver->ops->remove)
1244 driver->ops->remove(driver, tty);
1245 else
1246 driver->ttys[tty->index] = NULL;
1247}
1248
1249/*
1250 * tty_reopen() - fast re-open of an open tty
1251 * @tty - the tty to open
1252 *
1253 * Return 0 on success, -errno on error.
1254 * Re-opens on master ptys are not allowed and return -EIO.
1255 *
1256 * Locking: Caller must hold tty_lock
1257 */
1258static int tty_reopen(struct tty_struct *tty)
1259{
1260 struct tty_driver *driver = tty->driver;
1261 struct tty_ldisc *ld;
1262 int retval = 0;
1263
1264 if (driver->type == TTY_DRIVER_TYPE_PTY &&
1265 driver->subtype == PTY_TYPE_MASTER)
1266 return -EIO;
1267
1268 if (!tty->count)
1269 return -EAGAIN;
1270
1271 if (test_bit(TTY_EXCLUSIVE, &tty->flags) && !capable(CAP_SYS_ADMIN))
1272 return -EBUSY;
1273
1274 ld = tty_ldisc_ref_wait(tty);
1275 if (ld) {
1276 tty_ldisc_deref(ld);
1277 } else {
1278 retval = tty_ldisc_lock(tty, 5 * HZ);
1279 if (retval)
1280 return retval;
1281
1282 if (!tty->ldisc)
1283 retval = tty_ldisc_reinit(tty, tty->termios.c_line);
1284 tty_ldisc_unlock(tty);
1285 }
1286
1287 if (retval == 0)
1288 tty->count++;
1289
1290 return retval;
1291}
1292
1293/**
1294 * tty_init_dev - initialise a tty device
1295 * @driver: tty driver we are opening a device on
1296 * @idx: device index
1297 * @ret_tty: returned tty structure
1298 *
1299 * Prepare a tty device. This may not be a "new" clean device but
1300 * could also be an active device. The pty drivers require special
1301 * handling because of this.
1302 *
1303 * Locking:
1304 * The function is called under the tty_mutex, which
1305 * protects us from the tty struct or driver itself going away.
1306 *
1307 * On exit the tty device has the line discipline attached and
1308 * a reference count of 1. If a pair was created for pty/tty use
1309 * and the other was a pty master then it too has a reference count of 1.
1310 *
1311 * WSH 06/09/97: Rewritten to remove races and properly clean up after a
1312 * failed open. The new code protects the open with a mutex, so it's
1313 * really quite straightforward. The mutex locking can probably be
1314 * relaxed for the (most common) case of reopening a tty.
1315 */
1316
1317struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
1318{
1319 struct tty_struct *tty;
1320 int retval;
1321
1322 /*
1323 * First time open is complex, especially for PTY devices.
1324 * This code guarantees that either everything succeeds and the
1325 * TTY is ready for operation, or else the table slots are vacated
1326 * and the allocated memory released. (Except that the termios
1327 * may be retained.)
1328 */
1329
1330 if (!try_module_get(driver->owner))
1331 return ERR_PTR(-ENODEV);
1332
1333 tty = alloc_tty_struct(driver, idx);
1334 if (!tty) {
1335 retval = -ENOMEM;
1336 goto err_module_put;
1337 }
1338
1339 tty_lock(tty);
1340 retval = tty_driver_install_tty(driver, tty);
1341 if (retval < 0)
1342 goto err_free_tty;
1343
1344 if (!tty->port)
1345 tty->port = driver->ports[idx];
1346
1347 WARN_RATELIMIT(!tty->port,
1348 "%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n",
1349 __func__, tty->driver->name);
1350
1351 retval = tty_ldisc_lock(tty, 5 * HZ);
1352 if (retval)
1353 goto err_release_lock;
1354 tty->port->itty = tty;
1355
1356 /*
1357 * Structures all installed ... call the ldisc open routines.
1358 * If we fail here just call release_tty to clean up. No need
1359 * to decrement the use counts, as release_tty doesn't care.
1360 */
1361 retval = tty_ldisc_setup(tty, tty->link);
1362 if (retval)
1363 goto err_release_tty;
1364 tty_ldisc_unlock(tty);
1365 /* Return the tty locked so that it cannot vanish under the caller */
1366 return tty;
1367
1368err_free_tty:
1369 tty_unlock(tty);
1370 free_tty_struct(tty);
1371err_module_put:
1372 module_put(driver->owner);
1373 return ERR_PTR(retval);
1374
1375 /* call the tty release_tty routine to clean out this slot */
1376err_release_tty:
1377 tty_ldisc_unlock(tty);
1378 tty_info_ratelimited(tty, "ldisc open failed (%d), clearing slot %d\n",
1379 retval, idx);
1380err_release_lock:
1381 tty_unlock(tty);
1382 release_tty(tty, idx);
1383 return ERR_PTR(retval);
1384}
1385
1386/**
1387 * tty_save_termios() - save tty termios data in driver table
1388 * @tty: tty whose termios data to save
1389 *
1390 * Locking: Caller guarantees serialisation with tty_init_termios().
1391 */
1392void tty_save_termios(struct tty_struct *tty)
1393{
1394 struct ktermios *tp;
1395 int idx = tty->index;
1396
1397 /* If the port is going to reset then it has no termios to save */
1398 if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
1399 return;
1400
1401 /* Stash the termios data */
1402 tp = tty->driver->termios[idx];
1403 if (tp == NULL) {
1404 tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
1405 if (tp == NULL)
1406 return;
1407 tty->driver->termios[idx] = tp;
1408 }
1409 *tp = tty->termios;
1410}
1411EXPORT_SYMBOL_GPL(tty_save_termios);
1412
1413/**
1414 * tty_flush_works - flush all works of a tty/pty pair
1415 * @tty: tty device to flush works for (or either end of a pty pair)
1416 *
1417 * Sync flush all works belonging to @tty (and the 'other' tty).
1418 */
1419static void tty_flush_works(struct tty_struct *tty)
1420{
1421 flush_work(&tty->SAK_work);
1422 flush_work(&tty->hangup_work);
1423 if (tty->link) {
1424 flush_work(&tty->link->SAK_work);
1425 flush_work(&tty->link->hangup_work);
1426 }
1427}
1428
1429/**
1430 * release_one_tty - release tty structure memory
1431 * @kref: kref of tty we are obliterating
1432 *
1433 * Releases memory associated with a tty structure, and clears out the
1434 * driver table slots. This function is called when a device is no longer
1435 * in use. It also gets called when setup of a device fails.
1436 *
1437 * Locking:
1438 * takes the file list lock internally when working on the list
1439 * of ttys that the driver keeps.
1440 *
1441 * This method gets called from a work queue so that the driver private
1442 * cleanup ops can sleep (needed for USB at least)
1443 */
1444static void release_one_tty(struct work_struct *work)
1445{
1446 struct tty_struct *tty =
1447 container_of(work, struct tty_struct, hangup_work);
1448 struct tty_driver *driver = tty->driver;
1449 struct module *owner = driver->owner;
1450
1451 if (tty->ops->cleanup)
1452 tty->ops->cleanup(tty);
1453
1454 tty->magic = 0;
1455 tty_driver_kref_put(driver);
1456 module_put(owner);
1457
1458 spin_lock(&tty->files_lock);
1459 list_del_init(&tty->tty_files);
1460 spin_unlock(&tty->files_lock);
1461
1462 put_pid(tty->pgrp);
1463 put_pid(tty->session);
1464 free_tty_struct(tty);
1465}
1466
1467static void queue_release_one_tty(struct kref *kref)
1468{
1469 struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
1470
1471 /* The hangup queue is now free so we can reuse it rather than
1472 waste a chunk of memory for each port */
1473 INIT_WORK(&tty->hangup_work, release_one_tty);
1474 schedule_work(&tty->hangup_work);
1475}
1476
1477/**
1478 * tty_kref_put - release a tty kref
1479 * @tty: tty device
1480 *
1481 * Release a reference to a tty device and if need be let the kref
1482 * layer destruct the object for us
1483 */
1484
1485void tty_kref_put(struct tty_struct *tty)
1486{
1487 if (tty)
1488 kref_put(&tty->kref, queue_release_one_tty);
1489}
1490EXPORT_SYMBOL(tty_kref_put);
1491
1492/**
1493 * release_tty - release tty structure memory
1494 *
1495 * Release both @tty and a possible linked partner (think pty pair),
1496 * and decrement the refcount of the backing module.
1497 *
1498 * Locking:
1499 * tty_mutex
1500 * takes the file list lock internally when working on the list
1501 * of ttys that the driver keeps.
1502 *
1503 */
1504static void release_tty(struct tty_struct *tty, int idx)
1505{
1506 /* This should always be true but check for the moment */
1507 WARN_ON(tty->index != idx);
1508 WARN_ON(!mutex_is_locked(&tty_mutex));
1509 if (tty->ops->shutdown)
1510 tty->ops->shutdown(tty);
1511 tty_save_termios(tty);
1512 tty_driver_remove_tty(tty->driver, tty);
1513 tty->port->itty = NULL;
1514 if (tty->link)
1515 tty->link->port->itty = NULL;
1516 tty_buffer_cancel_work(tty->port);
1517 if (tty->link)
1518 tty_buffer_cancel_work(tty->link->port);
1519
1520 tty_kref_put(tty->link);
1521 tty_kref_put(tty);
1522}
1523
1524/**
1525 * tty_release_checks - check a tty before real release
1526 * @tty: tty to check
1527 * @o_tty: link of @tty (if any)
1528 * @idx: index of the tty
1529 *
1530 * Performs some paranoid checking before true release of the @tty.
1531 * This is a no-op unless TTY_PARANOIA_CHECK is defined.
1532 */
1533static int tty_release_checks(struct tty_struct *tty, int idx)
1534{
1535#ifdef TTY_PARANOIA_CHECK
1536 if (idx < 0 || idx >= tty->driver->num) {
1537 tty_debug(tty, "bad idx %d\n", idx);
1538 return -1;
1539 }
1540
1541 /* not much to check for devpts */
1542 if (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)
1543 return 0;
1544
1545 if (tty != tty->driver->ttys[idx]) {
1546 tty_debug(tty, "bad driver table[%d] = %p\n",
1547 idx, tty->driver->ttys[idx]);
1548 return -1;
1549 }
1550 if (tty->driver->other) {
1551 struct tty_struct *o_tty = tty->link;
1552
1553 if (o_tty != tty->driver->other->ttys[idx]) {
1554 tty_debug(tty, "bad other table[%d] = %p\n",
1555 idx, tty->driver->other->ttys[idx]);
1556 return -1;
1557 }
1558 if (o_tty->link != tty) {
1559 tty_debug(tty, "bad link = %p\n", o_tty->link);
1560 return -1;
1561 }
1562 }
1563#endif
1564 return 0;
1565}
1566
1567/**
1568 * tty_kclose - closes tty opened by tty_kopen
1569 * @tty: tty device
1570 *
1571 * Performs the final steps to release and free a tty device. It is the
1572 * same as tty_release_struct except that it also resets TTY_PORT_KOPENED
1573 * flag on tty->port.
1574 */
1575void tty_kclose(struct tty_struct *tty)
1576{
1577 /*
1578 * Ask the line discipline code to release its structures
1579 */
1580 tty_ldisc_release(tty);
1581
1582 /* Wait for pending work before tty destruction commmences */
1583 tty_flush_works(tty);
1584
1585 tty_debug_hangup(tty, "freeing structure\n");
1586 /*
1587 * The release_tty function takes care of the details of clearing
1588 * the slots and preserving the termios structure. The tty_unlock_pair
1589 * should be safe as we keep a kref while the tty is locked (so the
1590 * unlock never unlocks a freed tty).
1591 */
1592 mutex_lock(&tty_mutex);
1593 tty_port_set_kopened(tty->port, 0);
1594 release_tty(tty, tty->index);
1595 mutex_unlock(&tty_mutex);
1596}
1597EXPORT_SYMBOL_GPL(tty_kclose);
1598
1599/**
1600 * tty_release_struct - release a tty struct
1601 * @tty: tty device
1602 * @idx: index of the tty
1603 *
1604 * Performs the final steps to release and free a tty device. It is
1605 * roughly the reverse of tty_init_dev.
1606 */
1607void tty_release_struct(struct tty_struct *tty, int idx)
1608{
1609 /*
1610 * Ask the line discipline code to release its structures
1611 */
1612 tty_ldisc_release(tty);
1613
1614 /* Wait for pending work before tty destruction commmences */
1615 tty_flush_works(tty);
1616
1617 tty_debug_hangup(tty, "freeing structure\n");
1618 /*
1619 * The release_tty function takes care of the details of clearing
1620 * the slots and preserving the termios structure. The tty_unlock_pair
1621 * should be safe as we keep a kref while the tty is locked (so the
1622 * unlock never unlocks a freed tty).
1623 */
1624 mutex_lock(&tty_mutex);
1625 release_tty(tty, idx);
1626 mutex_unlock(&tty_mutex);
1627}
1628EXPORT_SYMBOL_GPL(tty_release_struct);
1629
1630/**
1631 * tty_release - vfs callback for close
1632 * @inode: inode of tty
1633 * @filp: file pointer for handle to tty
1634 *
1635 * Called the last time each file handle is closed that references
1636 * this tty. There may however be several such references.
1637 *
1638 * Locking:
1639 * Takes bkl. See tty_release_dev
1640 *
1641 * Even releasing the tty structures is a tricky business.. We have
1642 * to be very careful that the structures are all released at the
1643 * same time, as interrupts might otherwise get the wrong pointers.
1644 *
1645 * WSH 09/09/97: rewritten to avoid some nasty race conditions that could
1646 * lead to double frees or releasing memory still in use.
1647 */
1648
1649int tty_release(struct inode *inode, struct file *filp)
1650{
1651 struct tty_struct *tty = file_tty(filp);
1652 struct tty_struct *o_tty = NULL;
1653 int do_sleep, final;
1654 int idx;
1655 long timeout = 0;
1656 int once = 1;
1657
1658 if (tty_paranoia_check(tty, inode, __func__))
1659 return 0;
1660
1661 tty_lock(tty);
1662 check_tty_count(tty, __func__);
1663
1664 __tty_fasync(-1, filp, 0);
1665
1666 idx = tty->index;
1667 if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
1668 tty->driver->subtype == PTY_TYPE_MASTER)
1669 o_tty = tty->link;
1670
1671 if (tty_release_checks(tty, idx)) {
1672 tty_unlock(tty);
1673 return 0;
1674 }
1675
1676 tty_debug_hangup(tty, "releasing (count=%d)\n", tty->count);
1677
1678 if (tty->ops->close)
1679 tty->ops->close(tty, filp);
1680
1681 /* If tty is pty master, lock the slave pty (stable lock order) */
1682 tty_lock_slave(o_tty);
1683
1684 /*
1685 * Sanity check: if tty->count is going to zero, there shouldn't be
1686 * any waiters on tty->read_wait or tty->write_wait. We test the
1687 * wait queues and kick everyone out _before_ actually starting to
1688 * close. This ensures that we won't block while releasing the tty
1689 * structure.
1690 *
1691 * The test for the o_tty closing is necessary, since the master and
1692 * slave sides may close in any order. If the slave side closes out
1693 * first, its count will be one, since the master side holds an open.
1694 * Thus this test wouldn't be triggered at the time the slave closed,
1695 * so we do it now.
1696 */
1697 while (1) {
1698 do_sleep = 0;
1699
1700 if (tty->count <= 1) {
1701 if (waitqueue_active(&tty->read_wait)) {
1702 wake_up_poll(&tty->read_wait, EPOLLIN);
1703 do_sleep++;
1704 }
1705 if (waitqueue_active(&tty->write_wait)) {
1706 wake_up_poll(&tty->write_wait, EPOLLOUT);
1707 do_sleep++;
1708 }
1709 }
1710 if (o_tty && o_tty->count <= 1) {
1711 if (waitqueue_active(&o_tty->read_wait)) {
1712 wake_up_poll(&o_tty->read_wait, EPOLLIN);
1713 do_sleep++;
1714 }
1715 if (waitqueue_active(&o_tty->write_wait)) {
1716 wake_up_poll(&o_tty->write_wait, EPOLLOUT);
1717 do_sleep++;
1718 }
1719 }
1720 if (!do_sleep)
1721 break;
1722
1723 if (once) {
1724 once = 0;
1725 tty_warn(tty, "read/write wait queue active!\n");
1726 }
1727 schedule_timeout_killable(timeout);
1728 if (timeout < 120 * HZ)
1729 timeout = 2 * timeout + 1;
1730 else
1731 timeout = MAX_SCHEDULE_TIMEOUT;
1732 }
1733
1734 if (o_tty) {
1735 if (--o_tty->count < 0) {
1736 tty_warn(tty, "bad slave count (%d)\n", o_tty->count);
1737 o_tty->count = 0;
1738 }
1739 }
1740 if (--tty->count < 0) {
1741 tty_warn(tty, "bad tty->count (%d)\n", tty->count);
1742 tty->count = 0;
1743 }
1744
1745 /*
1746 * We've decremented tty->count, so we need to remove this file
1747 * descriptor off the tty->tty_files list; this serves two
1748 * purposes:
1749 * - check_tty_count sees the correct number of file descriptors
1750 * associated with this tty.
1751 * - do_tty_hangup no longer sees this file descriptor as
1752 * something that needs to be handled for hangups.
1753 */
1754 tty_del_file(filp);
1755
1756 /*
1757 * Perform some housekeeping before deciding whether to return.
1758 *
1759 * If _either_ side is closing, make sure there aren't any
1760 * processes that still think tty or o_tty is their controlling
1761 * tty.
1762 */
1763 if (!tty->count) {
1764 read_lock(&tasklist_lock);
1765 session_clear_tty(tty->session);
1766 if (o_tty)
1767 session_clear_tty(o_tty->session);
1768 read_unlock(&tasklist_lock);
1769 }
1770
1771 /* check whether both sides are closing ... */
1772 final = !tty->count && !(o_tty && o_tty->count);
1773
1774 tty_unlock_slave(o_tty);
1775 tty_unlock(tty);
1776
1777 /* At this point, the tty->count == 0 should ensure a dead tty
1778 cannot be re-opened by a racing opener */
1779
1780 if (!final)
1781 return 0;
1782
1783 tty_debug_hangup(tty, "final close\n");
1784
1785 tty_release_struct(tty, idx);
1786 return 0;
1787}
1788
1789/**
1790 * tty_open_current_tty - get locked tty of current task
1791 * @device: device number
1792 * @filp: file pointer to tty
1793 * @return: locked tty of the current task iff @device is /dev/tty
1794 *
1795 * Performs a re-open of the current task's controlling tty.
1796 *
1797 * We cannot return driver and index like for the other nodes because
1798 * devpts will not work then. It expects inodes to be from devpts FS.
1799 */
1800static struct tty_struct *tty_open_current_tty(dev_t device, struct file *filp)
1801{
1802 struct tty_struct *tty;
1803 int retval;
1804
1805 if (device != MKDEV(TTYAUX_MAJOR, 0))
1806 return NULL;
1807
1808 tty = get_current_tty();
1809 if (!tty)
1810 return ERR_PTR(-ENXIO);
1811
1812 filp->f_flags |= O_NONBLOCK; /* Don't let /dev/tty block */
1813 /* noctty = 1; */
1814 tty_lock(tty);
1815 tty_kref_put(tty); /* safe to drop the kref now */
1816
1817 retval = tty_reopen(tty);
1818 if (retval < 0) {
1819 tty_unlock(tty);
1820 tty = ERR_PTR(retval);
1821 }
1822 return tty;
1823}
1824
1825/**
1826 * tty_lookup_driver - lookup a tty driver for a given device file
1827 * @device: device number
1828 * @filp: file pointer to tty
1829 * @index: index for the device in the @return driver
1830 * @return: driver for this inode (with increased refcount)
1831 *
1832 * If @return is not erroneous, the caller is responsible to decrement the
1833 * refcount by tty_driver_kref_put.
1834 *
1835 * Locking: tty_mutex protects get_tty_driver
1836 */
1837static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp,
1838 int *index)
1839{
1840 struct tty_driver *driver = NULL;
1841
1842 switch (device) {
1843#ifdef CONFIG_VT
1844 case MKDEV(TTY_MAJOR, 0): {
1845 extern struct tty_driver *console_driver;
1846 driver = tty_driver_kref_get(console_driver);
1847 *index = fg_console;
1848 break;
1849 }
1850#endif
1851 case MKDEV(TTYAUX_MAJOR, 1): {
1852 struct tty_driver *console_driver = console_device(index);
1853 if (console_driver) {
1854 driver = tty_driver_kref_get(console_driver);
1855 if (driver && filp) {
1856 /* Don't let /dev/console block */
1857 filp->f_flags |= O_NONBLOCK;
1858 break;
1859 }
1860 }
1861 if (driver)
1862 tty_driver_kref_put(driver);
1863 return ERR_PTR(-ENODEV);
1864 }
1865 default:
1866 driver = get_tty_driver(device, index);
1867 if (!driver)
1868 return ERR_PTR(-ENODEV);
1869 break;
1870 }
1871 return driver;
1872}
1873
1874/**
1875 * tty_kopen - open a tty device for kernel
1876 * @device: dev_t of device to open
1877 *
1878 * Opens tty exclusively for kernel. Performs the driver lookup,
1879 * makes sure it's not already opened and performs the first-time
1880 * tty initialization.
1881 *
1882 * Returns the locked initialized &tty_struct
1883 *
1884 * Claims the global tty_mutex to serialize:
1885 * - concurrent first-time tty initialization
1886 * - concurrent tty driver removal w/ lookup
1887 * - concurrent tty removal from driver table
1888 */
1889struct tty_struct *tty_kopen(dev_t device)
1890{
1891 struct tty_struct *tty;
1892 struct tty_driver *driver = NULL;
1893 int index = -1;
1894
1895 mutex_lock(&tty_mutex);
1896 driver = tty_lookup_driver(device, NULL, &index);
1897 if (IS_ERR(driver)) {
1898 mutex_unlock(&tty_mutex);
1899 return ERR_CAST(driver);
1900 }
1901
1902 /* check whether we're reopening an existing tty */
1903 tty = tty_driver_lookup_tty(driver, NULL, index);
1904 if (IS_ERR(tty))
1905 goto out;
1906
1907 if (tty) {
1908 /* drop kref from tty_driver_lookup_tty() */
1909 tty_kref_put(tty);
1910 tty = ERR_PTR(-EBUSY);
1911 } else { /* tty_init_dev returns tty with the tty_lock held */
1912 tty = tty_init_dev(driver, index);
1913 if (IS_ERR(tty))
1914 goto out;
1915 tty_port_set_kopened(tty->port, 1);
1916 }
1917out:
1918 mutex_unlock(&tty_mutex);
1919 tty_driver_kref_put(driver);
1920 return tty;
1921}
1922EXPORT_SYMBOL_GPL(tty_kopen);
1923
1924/**
1925 * tty_open_by_driver - open a tty device
1926 * @device: dev_t of device to open
1927 * @inode: inode of device file
1928 * @filp: file pointer to tty
1929 *
1930 * Performs the driver lookup, checks for a reopen, or otherwise
1931 * performs the first-time tty initialization.
1932 *
1933 * Returns the locked initialized or re-opened &tty_struct
1934 *
1935 * Claims the global tty_mutex to serialize:
1936 * - concurrent first-time tty initialization
1937 * - concurrent tty driver removal w/ lookup
1938 * - concurrent tty removal from driver table
1939 */
1940static struct tty_struct *tty_open_by_driver(dev_t device, struct inode *inode,
1941 struct file *filp)
1942{
1943 struct tty_struct *tty;
1944 struct tty_driver *driver = NULL;
1945 int index = -1;
1946 int retval;
1947
1948 mutex_lock(&tty_mutex);
1949 driver = tty_lookup_driver(device, filp, &index);
1950 if (IS_ERR(driver)) {
1951 mutex_unlock(&tty_mutex);
1952 return ERR_CAST(driver);
1953 }
1954
1955 /* check whether we're reopening an existing tty */
1956 tty = tty_driver_lookup_tty(driver, filp, index);
1957 if (IS_ERR(tty)) {
1958 mutex_unlock(&tty_mutex);
1959 goto out;
1960 }
1961
1962 if (tty) {
1963 if (tty_port_kopened(tty->port)) {
1964 tty_kref_put(tty);
1965 mutex_unlock(&tty_mutex);
1966 tty = ERR_PTR(-EBUSY);
1967 goto out;
1968 }
1969 mutex_unlock(&tty_mutex);
1970 retval = tty_lock_interruptible(tty);
1971 tty_kref_put(tty); /* drop kref from tty_driver_lookup_tty() */
1972 if (retval) {
1973 if (retval == -EINTR)
1974 retval = -ERESTARTSYS;
1975 tty = ERR_PTR(retval);
1976 goto out;
1977 }
1978 retval = tty_reopen(tty);
1979 if (retval < 0) {
1980 tty_unlock(tty);
1981 tty = ERR_PTR(retval);
1982 }
1983 } else { /* Returns with the tty_lock held for now */
1984 tty = tty_init_dev(driver, index);
1985 mutex_unlock(&tty_mutex);
1986 }
1987out:
1988 tty_driver_kref_put(driver);
1989 return tty;
1990}
1991
1992/**
1993 * tty_open - open a tty device
1994 * @inode: inode of device file
1995 * @filp: file pointer to tty
1996 *
1997 * tty_open and tty_release keep up the tty count that contains the
1998 * number of opens done on a tty. We cannot use the inode-count, as
1999 * different inodes might point to the same tty.
2000 *
2001 * Open-counting is needed for pty masters, as well as for keeping
2002 * track of serial lines: DTR is dropped when the last close happens.
2003 * (This is not done solely through tty->count, now. - Ted 1/27/92)
2004 *
2005 * The termios state of a pty is reset on first open so that
2006 * settings don't persist across reuse.
2007 *
2008 * Locking: tty_mutex protects tty, tty_lookup_driver and tty_init_dev.
2009 * tty->count should protect the rest.
2010 * ->siglock protects ->signal/->sighand
2011 *
2012 * Note: the tty_unlock/lock cases without a ref are only safe due to
2013 * tty_mutex
2014 */
2015
2016static int tty_open(struct inode *inode, struct file *filp)
2017{
2018 struct tty_struct *tty;
2019 int noctty, retval;
2020 dev_t device = inode->i_rdev;
2021 unsigned saved_flags = filp->f_flags;
2022
2023 nonseekable_open(inode, filp);
2024
2025retry_open:
2026 retval = tty_alloc_file(filp);
2027 if (retval)
2028 return -ENOMEM;
2029
2030 tty = tty_open_current_tty(device, filp);
2031 if (!tty)
2032 tty = tty_open_by_driver(device, inode, filp);
2033
2034 if (IS_ERR(tty)) {
2035 tty_free_file(filp);
2036 retval = PTR_ERR(tty);
2037 if (retval != -EAGAIN || signal_pending(current))
2038 return retval;
2039 schedule();
2040 goto retry_open;
2041 }
2042
2043 tty_add_file(tty, filp);
2044
2045 check_tty_count(tty, __func__);
2046 tty_debug_hangup(tty, "opening (count=%d)\n", tty->count);
2047
2048 if (tty->ops->open)
2049 retval = tty->ops->open(tty, filp);
2050 else
2051 retval = -ENODEV;
2052 filp->f_flags = saved_flags;
2053
2054 if (retval) {
2055 tty_debug_hangup(tty, "open error %d, releasing\n", retval);
2056
2057 tty_unlock(tty); /* need to call tty_release without BTM */
2058 tty_release(inode, filp);
2059 if (retval != -ERESTARTSYS)
2060 return retval;
2061
2062 if (signal_pending(current))
2063 return retval;
2064
2065 schedule();
2066 /*
2067 * Need to reset f_op in case a hangup happened.
2068 */
2069 if (tty_hung_up_p(filp))
2070 filp->f_op = &tty_fops;
2071 goto retry_open;
2072 }
2073 clear_bit(TTY_HUPPED, &tty->flags);
2074
2075 noctty = (filp->f_flags & O_NOCTTY) ||
2076 (IS_ENABLED(CONFIG_VT) && device == MKDEV(TTY_MAJOR, 0)) ||
2077 device == MKDEV(TTYAUX_MAJOR, 1) ||
2078 (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
2079 tty->driver->subtype == PTY_TYPE_MASTER);
2080 if (!noctty)
2081 tty_open_proc_set_tty(filp, tty);
2082 tty_unlock(tty);
2083 return 0;
2084}
2085
2086
2087
2088/**
2089 * tty_poll - check tty status
2090 * @filp: file being polled
2091 * @wait: poll wait structures to update
2092 *
2093 * Call the line discipline polling method to obtain the poll
2094 * status of the device.
2095 *
2096 * Locking: locks called line discipline but ldisc poll method
2097 * may be re-entered freely by other callers.
2098 */
2099
2100static __poll_t tty_poll(struct file *filp, poll_table *wait)
2101{
2102 struct tty_struct *tty = file_tty(filp);
2103 struct tty_ldisc *ld;
2104 __poll_t ret = 0;
2105
2106 if (tty_paranoia_check(tty, file_inode(filp), "tty_poll"))
2107 return 0;
2108
2109 ld = tty_ldisc_ref_wait(tty);
2110 if (!ld)
2111 return hung_up_tty_poll(filp, wait);
2112 if (ld->ops->poll)
2113 ret = ld->ops->poll(tty, filp, wait);
2114 tty_ldisc_deref(ld);
2115 return ret;
2116}
2117
2118static int __tty_fasync(int fd, struct file *filp, int on)
2119{
2120 struct tty_struct *tty = file_tty(filp);
2121 unsigned long flags;
2122 int retval = 0;
2123
2124 if (tty_paranoia_check(tty, file_inode(filp), "tty_fasync"))
2125 goto out;
2126
2127 retval = fasync_helper(fd, filp, on, &tty->fasync);
2128 if (retval <= 0)
2129 goto out;
2130
2131 if (on) {
2132 enum pid_type type;
2133 struct pid *pid;
2134
2135 spin_lock_irqsave(&tty->ctrl_lock, flags);
2136 if (tty->pgrp) {
2137 pid = tty->pgrp;
2138 type = PIDTYPE_PGID;
2139 } else {
2140 pid = task_pid(current);
2141 type = PIDTYPE_TGID;
2142 }
2143 get_pid(pid);
2144 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
2145 __f_setown(filp, pid, type, 0);
2146 put_pid(pid);
2147 retval = 0;
2148 }
2149out:
2150 return retval;
2151}
2152
2153static int tty_fasync(int fd, struct file *filp, int on)
2154{
2155 struct tty_struct *tty = file_tty(filp);
2156 int retval = -ENOTTY;
2157
2158 tty_lock(tty);
2159 if (!tty_hung_up_p(filp))
2160 retval = __tty_fasync(fd, filp, on);
2161 tty_unlock(tty);
2162
2163 return retval;
2164}
2165
2166/**
2167 * tiocsti - fake input character
2168 * @tty: tty to fake input into
2169 * @p: pointer to character
2170 *
2171 * Fake input to a tty device. Does the necessary locking and
2172 * input management.
2173 *
2174 * FIXME: does not honour flow control ??
2175 *
2176 * Locking:
2177 * Called functions take tty_ldiscs_lock
2178 * current->signal->tty check is safe without locks
2179 *
2180 * FIXME: may race normal receive processing
2181 */
2182
2183static int tiocsti(struct tty_struct *tty, char __user *p)
2184{
2185 char ch, mbz = 0;
2186 struct tty_ldisc *ld;
2187
2188 if ((current->signal->tty != tty) && !capable(CAP_SYS_ADMIN))
2189 return -EPERM;
2190 if (get_user(ch, p))
2191 return -EFAULT;
2192 tty_audit_tiocsti(tty, ch);
2193 ld = tty_ldisc_ref_wait(tty);
2194 if (!ld)
2195 return -EIO;
2196 if (ld->ops->receive_buf)
2197 ld->ops->receive_buf(tty, &ch, &mbz, 1);
2198 tty_ldisc_deref(ld);
2199 return 0;
2200}
2201
2202/**
2203 * tiocgwinsz - implement window query ioctl
2204 * @tty; tty
2205 * @arg: user buffer for result
2206 *
2207 * Copies the kernel idea of the window size into the user buffer.
2208 *
2209 * Locking: tty->winsize_mutex is taken to ensure the winsize data
2210 * is consistent.
2211 */
2212
2213static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
2214{
2215 int err;
2216
2217 mutex_lock(&tty->winsize_mutex);
2218 err = copy_to_user(arg, &tty->winsize, sizeof(*arg));
2219 mutex_unlock(&tty->winsize_mutex);
2220
2221 return err ? -EFAULT: 0;
2222}
2223
2224/**
2225 * tty_do_resize - resize event
2226 * @tty: tty being resized
2227 * @rows: rows (character)
2228 * @cols: cols (character)
2229 *
2230 * Update the termios variables and send the necessary signals to
2231 * peform a terminal resize correctly
2232 */
2233
2234int tty_do_resize(struct tty_struct *tty, struct winsize *ws)
2235{
2236 struct pid *pgrp;
2237
2238 /* Lock the tty */
2239 mutex_lock(&tty->winsize_mutex);
2240 if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
2241 goto done;
2242
2243 /* Signal the foreground process group */
2244 pgrp = tty_get_pgrp(tty);
2245 if (pgrp)
2246 kill_pgrp(pgrp, SIGWINCH, 1);
2247 put_pid(pgrp);
2248
2249 tty->winsize = *ws;
2250done:
2251 mutex_unlock(&tty->winsize_mutex);
2252 return 0;
2253}
2254EXPORT_SYMBOL(tty_do_resize);
2255
2256/**
2257 * tiocswinsz - implement window size set ioctl
2258 * @tty; tty side of tty
2259 * @arg: user buffer for result
2260 *
2261 * Copies the user idea of the window size to the kernel. Traditionally
2262 * this is just advisory information but for the Linux console it
2263 * actually has driver level meaning and triggers a VC resize.
2264 *
2265 * Locking:
2266 * Driver dependent. The default do_resize method takes the
2267 * tty termios mutex and ctrl_lock. The console takes its own lock
2268 * then calls into the default method.
2269 */
2270
2271static int tiocswinsz(struct tty_struct *tty, struct winsize __user *arg)
2272{
2273 struct winsize tmp_ws;
2274 if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
2275 return -EFAULT;
2276
2277 if (tty->ops->resize)
2278 return tty->ops->resize(tty, &tmp_ws);
2279 else
2280 return tty_do_resize(tty, &tmp_ws);
2281}
2282
2283/**
2284 * tioccons - allow admin to move logical console
2285 * @file: the file to become console
2286 *
2287 * Allow the administrator to move the redirected console device
2288 *
2289 * Locking: uses redirect_lock to guard the redirect information
2290 */
2291
2292static int tioccons(struct file *file)
2293{
2294 if (!capable(CAP_SYS_ADMIN))
2295 return -EPERM;
2296 if (file->f_op->write == redirected_tty_write) {
2297 struct file *f;
2298 spin_lock(&redirect_lock);
2299 f = redirect;
2300 redirect = NULL;
2301 spin_unlock(&redirect_lock);
2302 if (f)
2303 fput(f);
2304 return 0;
2305 }
2306 spin_lock(&redirect_lock);
2307 if (redirect) {
2308 spin_unlock(&redirect_lock);
2309 return -EBUSY;
2310 }
2311 redirect = get_file(file);
2312 spin_unlock(&redirect_lock);
2313 return 0;
2314}
2315
2316/**
2317 * tiocsetd - set line discipline
2318 * @tty: tty device
2319 * @p: pointer to user data
2320 *
2321 * Set the line discipline according to user request.
2322 *
2323 * Locking: see tty_set_ldisc, this function is just a helper
2324 */
2325
2326static int tiocsetd(struct tty_struct *tty, int __user *p)
2327{
2328 int disc;
2329 int ret;
2330
2331 if (get_user(disc, p))
2332 return -EFAULT;
2333
2334 ret = tty_set_ldisc(tty, disc);
2335
2336 return ret;
2337}
2338
2339/**
2340 * tiocgetd - get line discipline
2341 * @tty: tty device
2342 * @p: pointer to user data
2343 *
2344 * Retrieves the line discipline id directly from the ldisc.
2345 *
2346 * Locking: waits for ldisc reference (in case the line discipline
2347 * is changing or the tty is being hungup)
2348 */
2349
2350static int tiocgetd(struct tty_struct *tty, int __user *p)
2351{
2352 struct tty_ldisc *ld;
2353 int ret;
2354
2355 ld = tty_ldisc_ref_wait(tty);
2356 if (!ld)
2357 return -EIO;
2358 ret = put_user(ld->ops->num, p);
2359 tty_ldisc_deref(ld);
2360 return ret;
2361}
2362
2363/**
2364 * send_break - performed time break
2365 * @tty: device to break on
2366 * @duration: timeout in mS
2367 *
2368 * Perform a timed break on hardware that lacks its own driver level
2369 * timed break functionality.
2370 *
2371 * Locking:
2372 * atomic_write_lock serializes
2373 *
2374 */
2375
2376static int send_break(struct tty_struct *tty, unsigned int duration)
2377{
2378 int retval;
2379
2380 if (tty->ops->break_ctl == NULL)
2381 return 0;
2382
2383 if (tty->driver->flags & TTY_DRIVER_HARDWARE_BREAK)
2384 retval = tty->ops->break_ctl(tty, duration);
2385 else {
2386 /* Do the work ourselves */
2387 if (tty_write_lock(tty, 0) < 0)
2388 return -EINTR;
2389 retval = tty->ops->break_ctl(tty, -1);
2390 if (retval)
2391 goto out;
2392 if (!signal_pending(current))
2393 msleep_interruptible(duration);
2394 retval = tty->ops->break_ctl(tty, 0);
2395out:
2396 tty_write_unlock(tty);
2397 if (signal_pending(current))
2398 retval = -EINTR;
2399 }
2400 return retval;
2401}
2402
2403/**
2404 * tty_tiocmget - get modem status
2405 * @tty: tty device
2406 * @file: user file pointer
2407 * @p: pointer to result
2408 *
2409 * Obtain the modem status bits from the tty driver if the feature
2410 * is supported. Return -EINVAL if it is not available.
2411 *
2412 * Locking: none (up to the driver)
2413 */
2414
2415static int tty_tiocmget(struct tty_struct *tty, int __user *p)
2416{
2417 int retval = -EINVAL;
2418
2419 if (tty->ops->tiocmget) {
2420 retval = tty->ops->tiocmget(tty);
2421
2422 if (retval >= 0)
2423 retval = put_user(retval, p);
2424 }
2425 return retval;
2426}
2427
2428/**
2429 * tty_tiocmset - set modem status
2430 * @tty: tty device
2431 * @cmd: command - clear bits, set bits or set all
2432 * @p: pointer to desired bits
2433 *
2434 * Set the modem status bits from the tty driver if the feature
2435 * is supported. Return -EINVAL if it is not available.
2436 *
2437 * Locking: none (up to the driver)
2438 */
2439
2440static int tty_tiocmset(struct tty_struct *tty, unsigned int cmd,
2441 unsigned __user *p)
2442{
2443 int retval;
2444 unsigned int set, clear, val;
2445
2446 if (tty->ops->tiocmset == NULL)
2447 return -EINVAL;
2448
2449 retval = get_user(val, p);
2450 if (retval)
2451 return retval;
2452 set = clear = 0;
2453 switch (cmd) {
2454 case TIOCMBIS:
2455 set = val;
2456 break;
2457 case TIOCMBIC:
2458 clear = val;
2459 break;
2460 case TIOCMSET:
2461 set = val;
2462 clear = ~val;
2463 break;
2464 }
2465 set &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
2466 clear &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
2467 return tty->ops->tiocmset(tty, set, clear);
2468}
2469
2470static int tty_tiocgicount(struct tty_struct *tty, void __user *arg)
2471{
2472 int retval = -EINVAL;
2473 struct serial_icounter_struct icount;
2474 memset(&icount, 0, sizeof(icount));
2475 if (tty->ops->get_icount)
2476 retval = tty->ops->get_icount(tty, &icount);
2477 if (retval != 0)
2478 return retval;
2479 if (copy_to_user(arg, &icount, sizeof(icount)))
2480 return -EFAULT;
2481 return 0;
2482}
2483
2484static int tty_tiocsserial(struct tty_struct *tty, struct serial_struct __user *ss)
2485{
2486 static DEFINE_RATELIMIT_STATE(depr_flags,
2487 DEFAULT_RATELIMIT_INTERVAL,
2488 DEFAULT_RATELIMIT_BURST);
2489 char comm[TASK_COMM_LEN];
2490 struct serial_struct v;
2491 int flags;
2492
2493 if (copy_from_user(&v, ss, sizeof(struct serial_struct)))
2494 return -EFAULT;
2495
2496 flags = v.flags & ASYNC_DEPRECATED;
2497
2498 if (flags && __ratelimit(&depr_flags))
2499 pr_warn("%s: '%s' is using deprecated serial flags (with no effect): %.8x\n",
2500 __func__, get_task_comm(comm, current), flags);
2501 if (!tty->ops->set_serial)
2502 return -ENOTTY;
2503 return tty->ops->set_serial(tty, &v);
2504}
2505
2506static int tty_tiocgserial(struct tty_struct *tty, struct serial_struct __user *ss)
2507{
2508 struct serial_struct v;
2509 int err;
2510
2511 memset(&v, 0, sizeof(struct serial_struct));
2512 if (!tty->ops->get_serial)
2513 return -ENOTTY;
2514 err = tty->ops->get_serial(tty, &v);
2515 if (!err && copy_to_user(ss, &v, sizeof(struct serial_struct)))
2516 err = -EFAULT;
2517 return err;
2518}
2519
2520/*
2521 * if pty, return the slave side (real_tty)
2522 * otherwise, return self
2523 */
2524static struct tty_struct *tty_pair_get_tty(struct tty_struct *tty)
2525{
2526 if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
2527 tty->driver->subtype == PTY_TYPE_MASTER)
2528 tty = tty->link;
2529 return tty;
2530}
2531
2532/*
2533 * Split this up, as gcc can choke on it otherwise..
2534 */
2535long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
2536{
2537 struct tty_struct *tty = file_tty(file);
2538 struct tty_struct *real_tty;
2539 void __user *p = (void __user *)arg;
2540 int retval;
2541 struct tty_ldisc *ld;
2542
2543 if (tty_paranoia_check(tty, file_inode(file), "tty_ioctl"))
2544 return -EINVAL;
2545
2546 real_tty = tty_pair_get_tty(tty);
2547
2548 /*
2549 * Factor out some common prep work
2550 */
2551 switch (cmd) {
2552 case TIOCSETD:
2553 case TIOCSBRK:
2554 case TIOCCBRK:
2555 case TCSBRK:
2556 case TCSBRKP:
2557 retval = tty_check_change(tty);
2558 if (retval)
2559 return retval;
2560 if (cmd != TIOCCBRK) {
2561 tty_wait_until_sent(tty, 0);
2562 if (signal_pending(current))
2563 return -EINTR;
2564 }
2565 break;
2566 }
2567
2568 /*
2569 * Now do the stuff.
2570 */
2571 switch (cmd) {
2572 case TIOCSTI:
2573 return tiocsti(tty, p);
2574 case TIOCGWINSZ:
2575 return tiocgwinsz(real_tty, p);
2576 case TIOCSWINSZ:
2577 return tiocswinsz(real_tty, p);
2578 case TIOCCONS:
2579 return real_tty != tty ? -EINVAL : tioccons(file);
2580 case TIOCEXCL:
2581 set_bit(TTY_EXCLUSIVE, &tty->flags);
2582 return 0;
2583 case TIOCNXCL:
2584 clear_bit(TTY_EXCLUSIVE, &tty->flags);
2585 return 0;
2586 case TIOCGEXCL:
2587 {
2588 int excl = test_bit(TTY_EXCLUSIVE, &tty->flags);
2589 return put_user(excl, (int __user *)p);
2590 }
2591 case TIOCGETD:
2592 return tiocgetd(tty, p);
2593 case TIOCSETD:
2594 return tiocsetd(tty, p);
2595 case TIOCVHANGUP:
2596 if (!capable(CAP_SYS_ADMIN))
2597 return -EPERM;
2598 tty_vhangup(tty);
2599 return 0;
2600 case TIOCGDEV:
2601 {
2602 unsigned int ret = new_encode_dev(tty_devnum(real_tty));
2603 return put_user(ret, (unsigned int __user *)p);
2604 }
2605 /*
2606 * Break handling
2607 */
2608 case TIOCSBRK: /* Turn break on, unconditionally */
2609 if (tty->ops->break_ctl)
2610 return tty->ops->break_ctl(tty, -1);
2611 return 0;
2612 case TIOCCBRK: /* Turn break off, unconditionally */
2613 if (tty->ops->break_ctl)
2614 return tty->ops->break_ctl(tty, 0);
2615 return 0;
2616 case TCSBRK: /* SVID version: non-zero arg --> no break */
2617 /* non-zero arg means wait for all output data
2618 * to be sent (performed above) but don't send break.
2619 * This is used by the tcdrain() termios function.
2620 */
2621 if (!arg)
2622 return send_break(tty, 250);
2623 return 0;
2624 case TCSBRKP: /* support for POSIX tcsendbreak() */
2625 return send_break(tty, arg ? arg*100 : 250);
2626
2627 case TIOCMGET:
2628 return tty_tiocmget(tty, p);
2629 case TIOCMSET:
2630 case TIOCMBIC:
2631 case TIOCMBIS:
2632 return tty_tiocmset(tty, cmd, p);
2633 case TIOCGICOUNT:
2634 return tty_tiocgicount(tty, p);
2635 case TCFLSH:
2636 switch (arg) {
2637 case TCIFLUSH:
2638 case TCIOFLUSH:
2639 /* flush tty buffer and allow ldisc to process ioctl */
2640 tty_buffer_flush(tty, NULL);
2641 break;
2642 }
2643 break;
2644 case TIOCSSERIAL:
2645 return tty_tiocsserial(tty, p);
2646 case TIOCGSERIAL:
2647 return tty_tiocgserial(tty, p);
2648 case TIOCGPTPEER:
2649 /* Special because the struct file is needed */
2650 return ptm_open_peer(file, tty, (int)arg);
2651 default:
2652 retval = tty_jobctrl_ioctl(tty, real_tty, file, cmd, arg);
2653 if (retval != -ENOIOCTLCMD)
2654 return retval;
2655 }
2656 if (tty->ops->ioctl) {
2657 retval = tty->ops->ioctl(tty, cmd, arg);
2658 if (retval != -ENOIOCTLCMD)
2659 return retval;
2660 }
2661 ld = tty_ldisc_ref_wait(tty);
2662 if (!ld)
2663 return hung_up_tty_ioctl(file, cmd, arg);
2664 retval = -EINVAL;
2665 if (ld->ops->ioctl) {
2666 retval = ld->ops->ioctl(tty, file, cmd, arg);
2667 if (retval == -ENOIOCTLCMD)
2668 retval = -ENOTTY;
2669 }
2670 tty_ldisc_deref(ld);
2671 return retval;
2672}
2673
2674#ifdef CONFIG_COMPAT
2675
2676struct serial_struct32 {
2677 compat_int_t type;
2678 compat_int_t line;
2679 compat_uint_t port;
2680 compat_int_t irq;
2681 compat_int_t flags;
2682 compat_int_t xmit_fifo_size;
2683 compat_int_t custom_divisor;
2684 compat_int_t baud_base;
2685 unsigned short close_delay;
2686 char io_type;
2687 char reserved_char[1];
2688 compat_int_t hub6;
2689 unsigned short closing_wait; /* time to wait before closing */
2690 unsigned short closing_wait2; /* no longer used... */
2691 compat_uint_t iomem_base;
2692 unsigned short iomem_reg_shift;
2693 unsigned int port_high;
2694 /* compat_ulong_t iomap_base FIXME */
2695 compat_int_t reserved[1];
2696};
2697
2698static int compat_tty_tiocsserial(struct tty_struct *tty,
2699 struct serial_struct32 __user *ss)
2700{
2701 static DEFINE_RATELIMIT_STATE(depr_flags,
2702 DEFAULT_RATELIMIT_INTERVAL,
2703 DEFAULT_RATELIMIT_BURST);
2704 char comm[TASK_COMM_LEN];
2705 struct serial_struct32 v32;
2706 struct serial_struct v;
2707 int flags;
2708
2709 if (copy_from_user(&v32, ss, sizeof(struct serial_struct32)))
2710 return -EFAULT;
2711
2712 memcpy(&v, &v32, offsetof(struct serial_struct32, iomem_base));
2713 v.iomem_base = compat_ptr(v32.iomem_base);
2714 v.iomem_reg_shift = v32.iomem_reg_shift;
2715 v.port_high = v32.port_high;
2716 v.iomap_base = 0;
2717
2718 flags = v.flags & ASYNC_DEPRECATED;
2719
2720 if (flags && __ratelimit(&depr_flags))
2721 pr_warn("%s: '%s' is using deprecated serial flags (with no effect): %.8x\n",
2722 __func__, get_task_comm(comm, current), flags);
2723 if (!tty->ops->set_serial)
2724 return -ENOTTY;
2725 return tty->ops->set_serial(tty, &v);
2726}
2727
2728static int compat_tty_tiocgserial(struct tty_struct *tty,
2729 struct serial_struct32 __user *ss)
2730{
2731 struct serial_struct32 v32;
2732 struct serial_struct v;
2733 int err;
2734 memset(&v, 0, sizeof(struct serial_struct));
2735
2736 if (!tty->ops->set_serial)
2737 return -ENOTTY;
2738 err = tty->ops->get_serial(tty, &v);
2739 if (!err) {
2740 memcpy(&v32, &v, offsetof(struct serial_struct32, iomem_base));
2741 v32.iomem_base = (unsigned long)v.iomem_base >> 32 ?
2742 0xfffffff : ptr_to_compat(v.iomem_base);
2743 v32.iomem_reg_shift = v.iomem_reg_shift;
2744 v32.port_high = v.port_high;
2745 if (copy_to_user(ss, &v32, sizeof(struct serial_struct32)))
2746 err = -EFAULT;
2747 }
2748 return err;
2749}
2750static long tty_compat_ioctl(struct file *file, unsigned int cmd,
2751 unsigned long arg)
2752{
2753 struct tty_struct *tty = file_tty(file);
2754 struct tty_ldisc *ld;
2755 int retval = -ENOIOCTLCMD;
2756
2757 switch (cmd) {
2758 case TIOCSTI:
2759 case TIOCGWINSZ:
2760 case TIOCSWINSZ:
2761 case TIOCGEXCL:
2762 case TIOCGETD:
2763 case TIOCSETD:
2764 case TIOCGDEV:
2765 case TIOCMGET:
2766 case TIOCMSET:
2767 case TIOCMBIC:
2768 case TIOCMBIS:
2769 case TIOCGICOUNT:
2770 case TIOCGPGRP:
2771 case TIOCSPGRP:
2772 case TIOCGSID:
2773 case TIOCSERGETLSR:
2774 case TIOCGRS485:
2775 case TIOCSRS485:
2776#ifdef TIOCGETP
2777 case TIOCGETP:
2778 case TIOCSETP:
2779 case TIOCSETN:
2780#endif
2781#ifdef TIOCGETC
2782 case TIOCGETC:
2783 case TIOCSETC:
2784#endif
2785#ifdef TIOCGLTC
2786 case TIOCGLTC:
2787 case TIOCSLTC:
2788#endif
2789 case TCSETSF:
2790 case TCSETSW:
2791 case TCSETS:
2792 case TCGETS:
2793#ifdef TCGETS2
2794 case TCGETS2:
2795 case TCSETSF2:
2796 case TCSETSW2:
2797 case TCSETS2:
2798#endif
2799 case TCGETA:
2800 case TCSETAF:
2801 case TCSETAW:
2802 case TCSETA:
2803 case TIOCGLCKTRMIOS:
2804 case TIOCSLCKTRMIOS:
2805#ifdef TCGETX
2806 case TCGETX:
2807 case TCSETX:
2808 case TCSETXW:
2809 case TCSETXF:
2810#endif
2811 case TIOCGSOFTCAR:
2812 case TIOCSSOFTCAR:
2813 return tty_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
2814 case TIOCCONS:
2815 case TIOCEXCL:
2816 case TIOCNXCL:
2817 case TIOCVHANGUP:
2818 case TIOCSBRK:
2819 case TIOCCBRK:
2820 case TCSBRK:
2821 case TCSBRKP:
2822 case TCFLSH:
2823 case TIOCGPTPEER:
2824 case TIOCNOTTY:
2825 case TIOCSCTTY:
2826 case TCXONC:
2827 case TIOCMIWAIT:
2828 case TIOCSERCONFIG:
2829 return tty_ioctl(file, cmd, arg);
2830 }
2831
2832 if (tty_paranoia_check(tty, file_inode(file), "tty_ioctl"))
2833 return -EINVAL;
2834
2835 switch (cmd) {
2836 case TIOCSSERIAL:
2837 return compat_tty_tiocsserial(tty, compat_ptr(arg));
2838 case TIOCGSERIAL:
2839 return compat_tty_tiocgserial(tty, compat_ptr(arg));
2840 }
2841 if (tty->ops->compat_ioctl) {
2842 retval = tty->ops->compat_ioctl(tty, cmd, arg);
2843 if (retval != -ENOIOCTLCMD)
2844 return retval;
2845 }
2846
2847 ld = tty_ldisc_ref_wait(tty);
2848 if (!ld)
2849 return hung_up_tty_compat_ioctl(file, cmd, arg);
2850 if (ld->ops->compat_ioctl)
2851 retval = ld->ops->compat_ioctl(tty, file, cmd, arg);
2852 if (retval == -ENOIOCTLCMD && ld->ops->ioctl)
2853 retval = ld->ops->ioctl(tty, file,
2854 (unsigned long)compat_ptr(cmd), arg);
2855 tty_ldisc_deref(ld);
2856
2857 return retval;
2858}
2859#endif
2860
2861static int this_tty(const void *t, struct file *file, unsigned fd)
2862{
2863 if (likely(file->f_op->read != tty_read))
2864 return 0;
2865 return file_tty(file) != t ? 0 : fd + 1;
2866}
2867
2868/*
2869 * This implements the "Secure Attention Key" --- the idea is to
2870 * prevent trojan horses by killing all processes associated with this
2871 * tty when the user hits the "Secure Attention Key". Required for
2872 * super-paranoid applications --- see the Orange Book for more details.
2873 *
2874 * This code could be nicer; ideally it should send a HUP, wait a few
2875 * seconds, then send a INT, and then a KILL signal. But you then
2876 * have to coordinate with the init process, since all processes associated
2877 * with the current tty must be dead before the new getty is allowed
2878 * to spawn.
2879 *
2880 * Now, if it would be correct ;-/ The current code has a nasty hole -
2881 * it doesn't catch files in flight. We may send the descriptor to ourselves
2882 * via AF_UNIX socket, close it and later fetch from socket. FIXME.
2883 *
2884 * Nasty bug: do_SAK is being called in interrupt context. This can
2885 * deadlock. We punt it up to process context. AKPM - 16Mar2001
2886 */
2887void __do_SAK(struct tty_struct *tty)
2888{
2889#ifdef TTY_SOFT_SAK
2890 tty_hangup(tty);
2891#else
2892 struct task_struct *g, *p;
2893 struct pid *session;
2894 int i;
2895
2896 if (!tty)
2897 return;
2898 session = tty->session;
2899
2900 tty_ldisc_flush(tty);
2901
2902 tty_driver_flush_buffer(tty);
2903
2904 read_lock(&tasklist_lock);
2905 /* Kill the entire session */
2906 do_each_pid_task(session, PIDTYPE_SID, p) {
2907 tty_notice(tty, "SAK: killed process %d (%s): by session\n",
2908 task_pid_nr(p), p->comm);
2909 group_send_sig_info(SIGKILL, SEND_SIG_PRIV, p, PIDTYPE_SID);
2910 } while_each_pid_task(session, PIDTYPE_SID, p);
2911
2912 /* Now kill any processes that happen to have the tty open */
2913 do_each_thread(g, p) {
2914 if (p->signal->tty == tty) {
2915 tty_notice(tty, "SAK: killed process %d (%s): by controlling tty\n",
2916 task_pid_nr(p), p->comm);
2917 group_send_sig_info(SIGKILL, SEND_SIG_PRIV, p, PIDTYPE_SID);
2918 continue;
2919 }
2920 task_lock(p);
2921 i = iterate_fd(p->files, 0, this_tty, tty);
2922 if (i != 0) {
2923 tty_notice(tty, "SAK: killed process %d (%s): by fd#%d\n",
2924 task_pid_nr(p), p->comm, i - 1);
2925 group_send_sig_info(SIGKILL, SEND_SIG_PRIV, p, PIDTYPE_SID);
2926 }
2927 task_unlock(p);
2928 } while_each_thread(g, p);
2929 read_unlock(&tasklist_lock);
2930#endif
2931}
2932
2933static void do_SAK_work(struct work_struct *work)
2934{
2935 struct tty_struct *tty =
2936 container_of(work, struct tty_struct, SAK_work);
2937 __do_SAK(tty);
2938}
2939
2940/*
2941 * The tq handling here is a little racy - tty->SAK_work may already be queued.
2942 * Fortunately we don't need to worry, because if ->SAK_work is already queued,
2943 * the values which we write to it will be identical to the values which it
2944 * already has. --akpm
2945 */
2946void do_SAK(struct tty_struct *tty)
2947{
2948 if (!tty)
2949 return;
2950 schedule_work(&tty->SAK_work);
2951}
2952
2953EXPORT_SYMBOL(do_SAK);
2954
2955/* Must put_device() after it's unused! */
2956static struct device *tty_get_device(struct tty_struct *tty)
2957{
2958 dev_t devt = tty_devnum(tty);
2959 return class_find_device_by_devt(tty_class, devt);
2960}
2961
2962
2963/**
2964 * alloc_tty_struct
2965 *
2966 * This subroutine allocates and initializes a tty structure.
2967 *
2968 * Locking: none - tty in question is not exposed at this point
2969 */
2970
2971struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx)
2972{
2973 struct tty_struct *tty;
2974
2975 tty = kzalloc(sizeof(*tty), GFP_KERNEL);
2976 if (!tty)
2977 return NULL;
2978
2979 kref_init(&tty->kref);
2980 tty->magic = TTY_MAGIC;
2981 if (tty_ldisc_init(tty)) {
2982 kfree(tty);
2983 return NULL;
2984 }
2985 tty->session = NULL;
2986 tty->pgrp = NULL;
2987 mutex_init(&tty->legacy_mutex);
2988 mutex_init(&tty->throttle_mutex);
2989 init_rwsem(&tty->termios_rwsem);
2990 mutex_init(&tty->winsize_mutex);
2991 init_ldsem(&tty->ldisc_sem);
2992 init_waitqueue_head(&tty->write_wait);
2993 init_waitqueue_head(&tty->read_wait);
2994 INIT_WORK(&tty->hangup_work, do_tty_hangup);
2995 mutex_init(&tty->atomic_write_lock);
2996 spin_lock_init(&tty->ctrl_lock);
2997 spin_lock_init(&tty->flow_lock);
2998 spin_lock_init(&tty->files_lock);
2999 INIT_LIST_HEAD(&tty->tty_files);
3000 INIT_WORK(&tty->SAK_work, do_SAK_work);
3001
3002 tty->driver = driver;
3003 tty->ops = driver->ops;
3004 tty->index = idx;
3005 tty_line_name(driver, idx, tty->name);
3006 tty->dev = tty_get_device(tty);
3007
3008 return tty;
3009}
3010
3011/**
3012 * tty_put_char - write one character to a tty
3013 * @tty: tty
3014 * @ch: character
3015 *
3016 * Write one byte to the tty using the provided put_char method
3017 * if present. Returns the number of characters successfully output.
3018 *
3019 * Note: the specific put_char operation in the driver layer may go
3020 * away soon. Don't call it directly, use this method
3021 */
3022
3023int tty_put_char(struct tty_struct *tty, unsigned char ch)
3024{
3025 if (tty->ops->put_char)
3026 return tty->ops->put_char(tty, ch);
3027 return tty->ops->write(tty, &ch, 1);
3028}
3029EXPORT_SYMBOL_GPL(tty_put_char);
3030
3031struct class *tty_class;
3032
3033static int tty_cdev_add(struct tty_driver *driver, dev_t dev,
3034 unsigned int index, unsigned int count)
3035{
3036 int err;
3037
3038 /* init here, since reused cdevs cause crashes */
3039 driver->cdevs[index] = cdev_alloc();
3040 if (!driver->cdevs[index])
3041 return -ENOMEM;
3042 driver->cdevs[index]->ops = &tty_fops;
3043 driver->cdevs[index]->owner = driver->owner;
3044 err = cdev_add(driver->cdevs[index], dev, count);
3045 if (err)
3046 kobject_put(&driver->cdevs[index]->kobj);
3047 return err;
3048}
3049
3050/**
3051 * tty_register_device - register a tty device
3052 * @driver: the tty driver that describes the tty device
3053 * @index: the index in the tty driver for this tty device
3054 * @device: a struct device that is associated with this tty device.
3055 * This field is optional, if there is no known struct device
3056 * for this tty device it can be set to NULL safely.
3057 *
3058 * Returns a pointer to the struct device for this tty device
3059 * (or ERR_PTR(-EFOO) on error).
3060 *
3061 * This call is required to be made to register an individual tty device
3062 * if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set. If
3063 * that bit is not set, this function should not be called by a tty
3064 * driver.
3065 *
3066 * Locking: ??
3067 */
3068
3069struct device *tty_register_device(struct tty_driver *driver, unsigned index,
3070 struct device *device)
3071{
3072 return tty_register_device_attr(driver, index, device, NULL, NULL);
3073}
3074EXPORT_SYMBOL(tty_register_device);
3075
3076static void tty_device_create_release(struct device *dev)
3077{
3078 dev_dbg(dev, "releasing...\n");
3079 kfree(dev);
3080}
3081
3082/**
3083 * tty_register_device_attr - register a tty device
3084 * @driver: the tty driver that describes the tty device
3085 * @index: the index in the tty driver for this tty device
3086 * @device: a struct device that is associated with this tty device.
3087 * This field is optional, if there is no known struct device
3088 * for this tty device it can be set to NULL safely.
3089 * @drvdata: Driver data to be set to device.
3090 * @attr_grp: Attribute group to be set on device.
3091 *
3092 * Returns a pointer to the struct device for this tty device
3093 * (or ERR_PTR(-EFOO) on error).
3094 *
3095 * This call is required to be made to register an individual tty device
3096 * if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set. If
3097 * that bit is not set, this function should not be called by a tty
3098 * driver.
3099 *
3100 * Locking: ??
3101 */
3102struct device *tty_register_device_attr(struct tty_driver *driver,
3103 unsigned index, struct device *device,
3104 void *drvdata,
3105 const struct attribute_group **attr_grp)
3106{
3107 char name[64];
3108 dev_t devt = MKDEV(driver->major, driver->minor_start) + index;
3109 struct ktermios *tp;
3110 struct device *dev;
3111 int retval;
3112
3113 if (index >= driver->num) {
3114 pr_err("%s: Attempt to register invalid tty line number (%d)\n",
3115 driver->name, index);
3116 return ERR_PTR(-EINVAL);
3117 }
3118
3119 if (driver->type == TTY_DRIVER_TYPE_PTY)
3120 pty_line_name(driver, index, name);
3121 else
3122 tty_line_name(driver, index, name);
3123
3124 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3125 if (!dev)
3126 return ERR_PTR(-ENOMEM);
3127
3128 dev->devt = devt;
3129 dev->class = tty_class;
3130 dev->parent = device;
3131 dev->release = tty_device_create_release;
3132 dev_set_name(dev, "%s", name);
3133 dev->groups = attr_grp;
3134 dev_set_drvdata(dev, drvdata);
3135
3136 dev_set_uevent_suppress(dev, 1);
3137
3138 retval = device_register(dev);
3139 if (retval)
3140 goto err_put;
3141
3142 if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
3143 /*
3144 * Free any saved termios data so that the termios state is
3145 * reset when reusing a minor number.
3146 */
3147 tp = driver->termios[index];
3148 if (tp) {
3149 driver->termios[index] = NULL;
3150 kfree(tp);
3151 }
3152
3153 retval = tty_cdev_add(driver, devt, index, 1);
3154 if (retval)
3155 goto err_del;
3156 }
3157
3158 dev_set_uevent_suppress(dev, 0);
3159 kobject_uevent(&dev->kobj, KOBJ_ADD);
3160
3161 return dev;
3162
3163err_del:
3164 device_del(dev);
3165err_put:
3166 put_device(dev);
3167
3168 return ERR_PTR(retval);
3169}
3170EXPORT_SYMBOL_GPL(tty_register_device_attr);
3171
3172/**
3173 * tty_unregister_device - unregister a tty device
3174 * @driver: the tty driver that describes the tty device
3175 * @index: the index in the tty driver for this tty device
3176 *
3177 * If a tty device is registered with a call to tty_register_device() then
3178 * this function must be called when the tty device is gone.
3179 *
3180 * Locking: ??
3181 */
3182
3183void tty_unregister_device(struct tty_driver *driver, unsigned index)
3184{
3185 device_destroy(tty_class,
3186 MKDEV(driver->major, driver->minor_start) + index);
3187 if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
3188 cdev_del(driver->cdevs[index]);
3189 driver->cdevs[index] = NULL;
3190 }
3191}
3192EXPORT_SYMBOL(tty_unregister_device);
3193
3194/**
3195 * __tty_alloc_driver -- allocate tty driver
3196 * @lines: count of lines this driver can handle at most
3197 * @owner: module which is responsible for this driver
3198 * @flags: some of TTY_DRIVER_* flags, will be set in driver->flags
3199 *
3200 * This should not be called directly, some of the provided macros should be
3201 * used instead. Use IS_ERR and friends on @retval.
3202 */
3203struct tty_driver *__tty_alloc_driver(unsigned int lines, struct module *owner,
3204 unsigned long flags)
3205{
3206 struct tty_driver *driver;
3207 unsigned int cdevs = 1;
3208 int err;
3209
3210 if (!lines || (flags & TTY_DRIVER_UNNUMBERED_NODE && lines > 1))
3211 return ERR_PTR(-EINVAL);
3212
3213 driver = kzalloc(sizeof(struct tty_driver), GFP_KERNEL);
3214 if (!driver)
3215 return ERR_PTR(-ENOMEM);
3216
3217 kref_init(&driver->kref);
3218 driver->magic = TTY_DRIVER_MAGIC;
3219 driver->num = lines;
3220 driver->owner = owner;
3221 driver->flags = flags;
3222
3223 if (!(flags & TTY_DRIVER_DEVPTS_MEM)) {
3224 driver->ttys = kcalloc(lines, sizeof(*driver->ttys),
3225 GFP_KERNEL);
3226 driver->termios = kcalloc(lines, sizeof(*driver->termios),
3227 GFP_KERNEL);
3228 if (!driver->ttys || !driver->termios) {
3229 err = -ENOMEM;
3230 goto err_free_all;
3231 }
3232 }
3233
3234 if (!(flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
3235 driver->ports = kcalloc(lines, sizeof(*driver->ports),
3236 GFP_KERNEL);
3237 if (!driver->ports) {
3238 err = -ENOMEM;
3239 goto err_free_all;
3240 }
3241 cdevs = lines;
3242 }
3243
3244 driver->cdevs = kcalloc(cdevs, sizeof(*driver->cdevs), GFP_KERNEL);
3245 if (!driver->cdevs) {
3246 err = -ENOMEM;
3247 goto err_free_all;
3248 }
3249
3250 return driver;
3251err_free_all:
3252 kfree(driver->ports);
3253 kfree(driver->ttys);
3254 kfree(driver->termios);
3255 kfree(driver->cdevs);
3256 kfree(driver);
3257 return ERR_PTR(err);
3258}
3259EXPORT_SYMBOL(__tty_alloc_driver);
3260
3261static void destruct_tty_driver(struct kref *kref)
3262{
3263 struct tty_driver *driver = container_of(kref, struct tty_driver, kref);
3264 int i;
3265 struct ktermios *tp;
3266
3267 if (driver->flags & TTY_DRIVER_INSTALLED) {
3268 for (i = 0; i < driver->num; i++) {
3269 tp = driver->termios[i];
3270 if (tp) {
3271 driver->termios[i] = NULL;
3272 kfree(tp);
3273 }
3274 if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV))
3275 tty_unregister_device(driver, i);
3276 }
3277 proc_tty_unregister_driver(driver);
3278 if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)
3279 cdev_del(driver->cdevs[0]);
3280 }
3281 kfree(driver->cdevs);
3282 kfree(driver->ports);
3283 kfree(driver->termios);
3284 kfree(driver->ttys);
3285 kfree(driver);
3286}
3287
3288void tty_driver_kref_put(struct tty_driver *driver)
3289{
3290 kref_put(&driver->kref, destruct_tty_driver);
3291}
3292EXPORT_SYMBOL(tty_driver_kref_put);
3293
3294void tty_set_operations(struct tty_driver *driver,
3295 const struct tty_operations *op)
3296{
3297 driver->ops = op;
3298};
3299EXPORT_SYMBOL(tty_set_operations);
3300
3301void put_tty_driver(struct tty_driver *d)
3302{
3303 tty_driver_kref_put(d);
3304}
3305EXPORT_SYMBOL(put_tty_driver);
3306
3307/*
3308 * Called by a tty driver to register itself.
3309 */
3310int tty_register_driver(struct tty_driver *driver)
3311{
3312 int error;
3313 int i;
3314 dev_t dev;
3315 struct device *d;
3316
3317 if (!driver->major) {
3318 error = alloc_chrdev_region(&dev, driver->minor_start,
3319 driver->num, driver->name);
3320 if (!error) {
3321 driver->major = MAJOR(dev);
3322 driver->minor_start = MINOR(dev);
3323 }
3324 } else {
3325 dev = MKDEV(driver->major, driver->minor_start);
3326 error = register_chrdev_region(dev, driver->num, driver->name);
3327 }
3328 if (error < 0)
3329 goto err;
3330
3331 if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC) {
3332 error = tty_cdev_add(driver, dev, 0, driver->num);
3333 if (error)
3334 goto err_unreg_char;
3335 }
3336
3337 mutex_lock(&tty_mutex);
3338 list_add(&driver->tty_drivers, &tty_drivers);
3339 mutex_unlock(&tty_mutex);
3340
3341 if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV)) {
3342 for (i = 0; i < driver->num; i++) {
3343 d = tty_register_device(driver, i, NULL);
3344 if (IS_ERR(d)) {
3345 error = PTR_ERR(d);
3346 goto err_unreg_devs;
3347 }
3348 }
3349 }
3350 proc_tty_register_driver(driver);
3351 driver->flags |= TTY_DRIVER_INSTALLED;
3352 return 0;
3353
3354err_unreg_devs:
3355 for (i--; i >= 0; i--)
3356 tty_unregister_device(driver, i);
3357
3358 mutex_lock(&tty_mutex);
3359 list_del(&driver->tty_drivers);
3360 mutex_unlock(&tty_mutex);
3361
3362err_unreg_char:
3363 unregister_chrdev_region(dev, driver->num);
3364err:
3365 return error;
3366}
3367EXPORT_SYMBOL(tty_register_driver);
3368
3369/*
3370 * Called by a tty driver to unregister itself.
3371 */
3372int tty_unregister_driver(struct tty_driver *driver)
3373{
3374#if 0
3375 /* FIXME */
3376 if (driver->refcount)
3377 return -EBUSY;
3378#endif
3379 unregister_chrdev_region(MKDEV(driver->major, driver->minor_start),
3380 driver->num);
3381 mutex_lock(&tty_mutex);
3382 list_del(&driver->tty_drivers);
3383 mutex_unlock(&tty_mutex);
3384 return 0;
3385}
3386
3387EXPORT_SYMBOL(tty_unregister_driver);
3388
3389dev_t tty_devnum(struct tty_struct *tty)
3390{
3391 return MKDEV(tty->driver->major, tty->driver->minor_start) + tty->index;
3392}
3393EXPORT_SYMBOL(tty_devnum);
3394
3395void tty_default_fops(struct file_operations *fops)
3396{
3397 *fops = tty_fops;
3398}
3399
3400static char *tty_devnode(struct device *dev, umode_t *mode)
3401{
3402 if (!mode)
3403 return NULL;
3404 if (dev->devt == MKDEV(TTYAUX_MAJOR, 0) ||
3405 dev->devt == MKDEV(TTYAUX_MAJOR, 2))
3406 *mode = 0666;
3407 return NULL;
3408}
3409
3410static int __init tty_class_init(void)
3411{
3412 tty_class = class_create(THIS_MODULE, "tty");
3413 if (IS_ERR(tty_class))
3414 return PTR_ERR(tty_class);
3415 tty_class->devnode = tty_devnode;
3416 return 0;
3417}
3418
3419postcore_initcall(tty_class_init);
3420
3421/* 3/2004 jmc: why do these devices exist? */
3422static struct cdev tty_cdev, console_cdev;
3423
3424static ssize_t show_cons_active(struct device *dev,
3425 struct device_attribute *attr, char *buf)
3426{
3427 struct console *cs[16];
3428 int i = 0;
3429 struct console *c;
3430 ssize_t count = 0;
3431
3432 console_lock();
3433 for_each_console(c) {
3434 if (!c->device)
3435 continue;
3436 if (!c->write)
3437 continue;
3438 if ((c->flags & CON_ENABLED) == 0)
3439 continue;
3440 cs[i++] = c;
3441 if (i >= ARRAY_SIZE(cs))
3442 break;
3443 }
3444 while (i--) {
3445 int index = cs[i]->index;
3446 struct tty_driver *drv = cs[i]->device(cs[i], &index);
3447
3448 /* don't resolve tty0 as some programs depend on it */
3449 if (drv && (cs[i]->index > 0 || drv->major != TTY_MAJOR))
3450 count += tty_line_name(drv, index, buf + count);
3451 else
3452 count += sprintf(buf + count, "%s%d",
3453 cs[i]->name, cs[i]->index);
3454
3455 count += sprintf(buf + count, "%c", i ? ' ':'\n');
3456 }
3457 console_unlock();
3458
3459 return count;
3460}
3461static DEVICE_ATTR(active, S_IRUGO, show_cons_active, NULL);
3462
3463static struct attribute *cons_dev_attrs[] = {
3464 &dev_attr_active.attr,
3465 NULL
3466};
3467
3468ATTRIBUTE_GROUPS(cons_dev);
3469
3470static struct device *consdev;
3471
3472void console_sysfs_notify(void)
3473{
3474 if (consdev)
3475 sysfs_notify(&consdev->kobj, NULL, "active");
3476}
3477
3478/*
3479 * Ok, now we can initialize the rest of the tty devices and can count
3480 * on memory allocations, interrupts etc..
3481 */
3482int __init tty_init(void)
3483{
3484 tty_sysctl_init();
3485 cdev_init(&tty_cdev, &tty_fops);
3486 if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) ||
3487 register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
3488 panic("Couldn't register /dev/tty driver\n");
3489 device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty");
3490
3491 cdev_init(&console_cdev, &console_fops);
3492 if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) ||
3493 register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0)
3494 panic("Couldn't register /dev/console driver\n");
3495 consdev = device_create_with_groups(tty_class, NULL,
3496 MKDEV(TTYAUX_MAJOR, 1), NULL,
3497 cons_dev_groups, "console");
3498 if (IS_ERR(consdev))
3499 consdev = NULL;
3500
3501#ifdef CONFIG_VT
3502 vty_init(&console_fops);
3503#endif
3504 return 0;
3505}
3506
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 1991, 1992 Linus Torvalds
4 */
5
6/*
7 * 'tty_io.c' gives an orthogonal feeling to tty's, be they consoles
8 * or rs-channels. It also implements echoing, cooked mode etc.
9 *
10 * Kill-line thanks to John T Kohl, who also corrected VMIN = VTIME = 0.
11 *
12 * Modified by Theodore Ts'o, 9/14/92, to dynamically allocate the
13 * tty_struct and tty_queue structures. Previously there was an array
14 * of 256 tty_struct's which was statically allocated, and the
15 * tty_queue structures were allocated at boot time. Both are now
16 * dynamically allocated only when the tty is open.
17 *
18 * Also restructured routines so that there is more of a separation
19 * between the high-level tty routines (tty_io.c and tty_ioctl.c) and
20 * the low-level tty routines (serial.c, pty.c, console.c). This
21 * makes for cleaner and more compact code. -TYT, 9/17/92
22 *
23 * Modified by Fred N. van Kempen, 01/29/93, to add line disciplines
24 * which can be dynamically activated and de-activated by the line
25 * discipline handling modules (like SLIP).
26 *
27 * NOTE: pay no attention to the line discipline code (yet); its
28 * interface is still subject to change in this version...
29 * -- TYT, 1/31/92
30 *
31 * Added functionality to the OPOST tty handling. No delays, but all
32 * other bits should be there.
33 * -- Nick Holloway <alfie@dcs.warwick.ac.uk>, 27th May 1993.
34 *
35 * Rewrote canonical mode and added more termios flags.
36 * -- julian@uhunix.uhcc.hawaii.edu (J. Cowley), 13Jan94
37 *
38 * Reorganized FASYNC support so mouse code can share it.
39 * -- ctm@ardi.com, 9Sep95
40 *
41 * New TIOCLINUX variants added.
42 * -- mj@k332.feld.cvut.cz, 19-Nov-95
43 *
44 * Restrict vt switching via ioctl()
45 * -- grif@cs.ucr.edu, 5-Dec-95
46 *
47 * Move console and virtual terminal code to more appropriate files,
48 * implement CONFIG_VT and generalize console device interface.
49 * -- Marko Kohtala <Marko.Kohtala@hut.fi>, March 97
50 *
51 * Rewrote tty_init_dev and tty_release_dev to eliminate races.
52 * -- Bill Hawes <whawes@star.net>, June 97
53 *
54 * Added devfs support.
55 * -- C. Scott Ananian <cananian@alumni.princeton.edu>, 13-Jan-1998
56 *
57 * Added support for a Unix98-style ptmx device.
58 * -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998
59 *
60 * Reduced memory usage for older ARM systems
61 * -- Russell King <rmk@arm.linux.org.uk>
62 *
63 * Move do_SAK() into process context. Less stack use in devfs functions.
64 * alloc_tty_struct() always uses kmalloc()
65 * -- Andrew Morton <andrewm@uow.edu.eu> 17Mar01
66 */
67
68#include <linux/types.h>
69#include <linux/major.h>
70#include <linux/errno.h>
71#include <linux/signal.h>
72#include <linux/fcntl.h>
73#include <linux/sched/signal.h>
74#include <linux/sched/task.h>
75#include <linux/interrupt.h>
76#include <linux/tty.h>
77#include <linux/tty_driver.h>
78#include <linux/tty_flip.h>
79#include <linux/devpts_fs.h>
80#include <linux/file.h>
81#include <linux/fdtable.h>
82#include <linux/console.h>
83#include <linux/timer.h>
84#include <linux/ctype.h>
85#include <linux/kd.h>
86#include <linux/mm.h>
87#include <linux/string.h>
88#include <linux/slab.h>
89#include <linux/poll.h>
90#include <linux/ppp-ioctl.h>
91#include <linux/proc_fs.h>
92#include <linux/init.h>
93#include <linux/module.h>
94#include <linux/device.h>
95#include <linux/wait.h>
96#include <linux/bitops.h>
97#include <linux/delay.h>
98#include <linux/seq_file.h>
99#include <linux/serial.h>
100#include <linux/ratelimit.h>
101#include <linux/compat.h>
102#include <linux/uaccess.h>
103#include <linux/termios_internal.h>
104#include <linux/fs.h>
105
106#include <linux/kbd_kern.h>
107#include <linux/vt_kern.h>
108#include <linux/selection.h>
109
110#include <linux/kmod.h>
111#include <linux/nsproxy.h>
112#include "tty.h"
113
114#undef TTY_DEBUG_HANGUP
115#ifdef TTY_DEBUG_HANGUP
116# define tty_debug_hangup(tty, f, args...) tty_debug(tty, f, ##args)
117#else
118# define tty_debug_hangup(tty, f, args...) do { } while (0)
119#endif
120
121#define TTY_PARANOIA_CHECK 1
122#define CHECK_TTY_COUNT 1
123
124struct ktermios tty_std_termios = { /* for the benefit of tty drivers */
125 .c_iflag = ICRNL | IXON,
126 .c_oflag = OPOST | ONLCR,
127 .c_cflag = B38400 | CS8 | CREAD | HUPCL,
128 .c_lflag = ISIG | ICANON | ECHO | ECHOE | ECHOK |
129 ECHOCTL | ECHOKE | IEXTEN,
130 .c_cc = INIT_C_CC,
131 .c_ispeed = 38400,
132 .c_ospeed = 38400,
133 /* .c_line = N_TTY, */
134};
135EXPORT_SYMBOL(tty_std_termios);
136
137/* This list gets poked at by procfs and various bits of boot up code. This
138 * could do with some rationalisation such as pulling the tty proc function
139 * into this file.
140 */
141
142LIST_HEAD(tty_drivers); /* linked list of tty drivers */
143
144/* Mutex to protect creating and releasing a tty */
145DEFINE_MUTEX(tty_mutex);
146
147static ssize_t tty_read(struct kiocb *, struct iov_iter *);
148static ssize_t tty_write(struct kiocb *, struct iov_iter *);
149static __poll_t tty_poll(struct file *, poll_table *);
150static int tty_open(struct inode *, struct file *);
151#ifdef CONFIG_COMPAT
152static long tty_compat_ioctl(struct file *file, unsigned int cmd,
153 unsigned long arg);
154#else
155#define tty_compat_ioctl NULL
156#endif
157static int __tty_fasync(int fd, struct file *filp, int on);
158static int tty_fasync(int fd, struct file *filp, int on);
159static void release_tty(struct tty_struct *tty, int idx);
160
161/**
162 * free_tty_struct - free a disused tty
163 * @tty: tty struct to free
164 *
165 * Free the write buffers, tty queue and tty memory itself.
166 *
167 * Locking: none. Must be called after tty is definitely unused
168 */
169static void free_tty_struct(struct tty_struct *tty)
170{
171 tty_ldisc_deinit(tty);
172 put_device(tty->dev);
173 kvfree(tty->write_buf);
174 kfree(tty);
175}
176
177static inline struct tty_struct *file_tty(struct file *file)
178{
179 return ((struct tty_file_private *)file->private_data)->tty;
180}
181
182int tty_alloc_file(struct file *file)
183{
184 struct tty_file_private *priv;
185
186 priv = kmalloc(sizeof(*priv), GFP_KERNEL);
187 if (!priv)
188 return -ENOMEM;
189
190 file->private_data = priv;
191
192 return 0;
193}
194
195/* Associate a new file with the tty structure */
196void tty_add_file(struct tty_struct *tty, struct file *file)
197{
198 struct tty_file_private *priv = file->private_data;
199
200 priv->tty = tty;
201 priv->file = file;
202
203 spin_lock(&tty->files_lock);
204 list_add(&priv->list, &tty->tty_files);
205 spin_unlock(&tty->files_lock);
206}
207
208/**
209 * tty_free_file - free file->private_data
210 * @file: to free private_data of
211 *
212 * This shall be used only for fail path handling when tty_add_file was not
213 * called yet.
214 */
215void tty_free_file(struct file *file)
216{
217 struct tty_file_private *priv = file->private_data;
218
219 file->private_data = NULL;
220 kfree(priv);
221}
222
223/* Delete file from its tty */
224static void tty_del_file(struct file *file)
225{
226 struct tty_file_private *priv = file->private_data;
227 struct tty_struct *tty = priv->tty;
228
229 spin_lock(&tty->files_lock);
230 list_del(&priv->list);
231 spin_unlock(&tty->files_lock);
232 tty_free_file(file);
233}
234
235/**
236 * tty_name - return tty naming
237 * @tty: tty structure
238 *
239 * Convert a tty structure into a name. The name reflects the kernel naming
240 * policy and if udev is in use may not reflect user space
241 *
242 * Locking: none
243 */
244const char *tty_name(const struct tty_struct *tty)
245{
246 if (!tty) /* Hmm. NULL pointer. That's fun. */
247 return "NULL tty";
248 return tty->name;
249}
250EXPORT_SYMBOL(tty_name);
251
252const char *tty_driver_name(const struct tty_struct *tty)
253{
254 if (!tty || !tty->driver)
255 return "";
256 return tty->driver->name;
257}
258
259static int tty_paranoia_check(struct tty_struct *tty, struct inode *inode,
260 const char *routine)
261{
262#ifdef TTY_PARANOIA_CHECK
263 if (!tty) {
264 pr_warn("(%d:%d): %s: NULL tty\n",
265 imajor(inode), iminor(inode), routine);
266 return 1;
267 }
268#endif
269 return 0;
270}
271
272/* Caller must hold tty_lock */
273static void check_tty_count(struct tty_struct *tty, const char *routine)
274{
275#ifdef CHECK_TTY_COUNT
276 struct list_head *p;
277 int count = 0, kopen_count = 0;
278
279 spin_lock(&tty->files_lock);
280 list_for_each(p, &tty->tty_files) {
281 count++;
282 }
283 spin_unlock(&tty->files_lock);
284 if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
285 tty->driver->subtype == PTY_TYPE_SLAVE &&
286 tty->link && tty->link->count)
287 count++;
288 if (tty_port_kopened(tty->port))
289 kopen_count++;
290 if (tty->count != (count + kopen_count)) {
291 tty_warn(tty, "%s: tty->count(%d) != (#fd's(%d) + #kopen's(%d))\n",
292 routine, tty->count, count, kopen_count);
293 }
294#endif
295}
296
297/**
298 * get_tty_driver - find device of a tty
299 * @device: device identifier
300 * @index: returns the index of the tty
301 *
302 * This routine returns a tty driver structure, given a device number and also
303 * passes back the index number.
304 *
305 * Locking: caller must hold tty_mutex
306 */
307static struct tty_driver *get_tty_driver(dev_t device, int *index)
308{
309 struct tty_driver *p;
310
311 list_for_each_entry(p, &tty_drivers, tty_drivers) {
312 dev_t base = MKDEV(p->major, p->minor_start);
313
314 if (device < base || device >= base + p->num)
315 continue;
316 *index = device - base;
317 return tty_driver_kref_get(p);
318 }
319 return NULL;
320}
321
322/**
323 * tty_dev_name_to_number - return dev_t for device name
324 * @name: user space name of device under /dev
325 * @number: pointer to dev_t that this function will populate
326 *
327 * This function converts device names like ttyS0 or ttyUSB1 into dev_t like
328 * (4, 64) or (188, 1). If no corresponding driver is registered then the
329 * function returns -%ENODEV.
330 *
331 * Locking: this acquires tty_mutex to protect the tty_drivers list from
332 * being modified while we are traversing it, and makes sure to
333 * release it before exiting.
334 */
335int tty_dev_name_to_number(const char *name, dev_t *number)
336{
337 struct tty_driver *p;
338 int ret;
339 int index, prefix_length = 0;
340 const char *str;
341
342 for (str = name; *str && !isdigit(*str); str++)
343 ;
344
345 if (!*str)
346 return -EINVAL;
347
348 ret = kstrtoint(str, 10, &index);
349 if (ret)
350 return ret;
351
352 prefix_length = str - name;
353 mutex_lock(&tty_mutex);
354
355 list_for_each_entry(p, &tty_drivers, tty_drivers)
356 if (prefix_length == strlen(p->name) && strncmp(name,
357 p->name, prefix_length) == 0) {
358 if (index < p->num) {
359 *number = MKDEV(p->major, p->minor_start + index);
360 goto out;
361 }
362 }
363
364 /* if here then driver wasn't found */
365 ret = -ENODEV;
366out:
367 mutex_unlock(&tty_mutex);
368 return ret;
369}
370EXPORT_SYMBOL_GPL(tty_dev_name_to_number);
371
372#ifdef CONFIG_CONSOLE_POLL
373
374/**
375 * tty_find_polling_driver - find device of a polled tty
376 * @name: name string to match
377 * @line: pointer to resulting tty line nr
378 *
379 * This routine returns a tty driver structure, given a name and the condition
380 * that the tty driver is capable of polled operation.
381 */
382struct tty_driver *tty_find_polling_driver(char *name, int *line)
383{
384 struct tty_driver *p, *res = NULL;
385 int tty_line = 0;
386 int len;
387 char *str, *stp;
388
389 for (str = name; *str; str++)
390 if ((*str >= '0' && *str <= '9') || *str == ',')
391 break;
392 if (!*str)
393 return NULL;
394
395 len = str - name;
396 tty_line = simple_strtoul(str, &str, 10);
397
398 mutex_lock(&tty_mutex);
399 /* Search through the tty devices to look for a match */
400 list_for_each_entry(p, &tty_drivers, tty_drivers) {
401 if (!len || strncmp(name, p->name, len) != 0)
402 continue;
403 stp = str;
404 if (*stp == ',')
405 stp++;
406 if (*stp == '\0')
407 stp = NULL;
408
409 if (tty_line >= 0 && tty_line < p->num && p->ops &&
410 p->ops->poll_init && !p->ops->poll_init(p, tty_line, stp)) {
411 res = tty_driver_kref_get(p);
412 *line = tty_line;
413 break;
414 }
415 }
416 mutex_unlock(&tty_mutex);
417
418 return res;
419}
420EXPORT_SYMBOL_GPL(tty_find_polling_driver);
421#endif
422
423static ssize_t hung_up_tty_read(struct kiocb *iocb, struct iov_iter *to)
424{
425 return 0;
426}
427
428static ssize_t hung_up_tty_write(struct kiocb *iocb, struct iov_iter *from)
429{
430 return -EIO;
431}
432
433/* No kernel lock held - none needed ;) */
434static __poll_t hung_up_tty_poll(struct file *filp, poll_table *wait)
435{
436 return EPOLLIN | EPOLLOUT | EPOLLERR | EPOLLHUP | EPOLLRDNORM | EPOLLWRNORM;
437}
438
439static long hung_up_tty_ioctl(struct file *file, unsigned int cmd,
440 unsigned long arg)
441{
442 return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
443}
444
445static long hung_up_tty_compat_ioctl(struct file *file,
446 unsigned int cmd, unsigned long arg)
447{
448 return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
449}
450
451static int hung_up_tty_fasync(int fd, struct file *file, int on)
452{
453 return -ENOTTY;
454}
455
456static void tty_show_fdinfo(struct seq_file *m, struct file *file)
457{
458 struct tty_struct *tty = file_tty(file);
459
460 if (tty && tty->ops && tty->ops->show_fdinfo)
461 tty->ops->show_fdinfo(tty, m);
462}
463
464static const struct file_operations tty_fops = {
465 .llseek = no_llseek,
466 .read_iter = tty_read,
467 .write_iter = tty_write,
468 .splice_read = copy_splice_read,
469 .splice_write = iter_file_splice_write,
470 .poll = tty_poll,
471 .unlocked_ioctl = tty_ioctl,
472 .compat_ioctl = tty_compat_ioctl,
473 .open = tty_open,
474 .release = tty_release,
475 .fasync = tty_fasync,
476 .show_fdinfo = tty_show_fdinfo,
477};
478
479static const struct file_operations console_fops = {
480 .llseek = no_llseek,
481 .read_iter = tty_read,
482 .write_iter = redirected_tty_write,
483 .splice_read = copy_splice_read,
484 .splice_write = iter_file_splice_write,
485 .poll = tty_poll,
486 .unlocked_ioctl = tty_ioctl,
487 .compat_ioctl = tty_compat_ioctl,
488 .open = tty_open,
489 .release = tty_release,
490 .fasync = tty_fasync,
491};
492
493static const struct file_operations hung_up_tty_fops = {
494 .llseek = no_llseek,
495 .read_iter = hung_up_tty_read,
496 .write_iter = hung_up_tty_write,
497 .poll = hung_up_tty_poll,
498 .unlocked_ioctl = hung_up_tty_ioctl,
499 .compat_ioctl = hung_up_tty_compat_ioctl,
500 .release = tty_release,
501 .fasync = hung_up_tty_fasync,
502};
503
504static DEFINE_SPINLOCK(redirect_lock);
505static struct file *redirect;
506
507/**
508 * tty_wakeup - request more data
509 * @tty: terminal
510 *
511 * Internal and external helper for wakeups of tty. This function informs the
512 * line discipline if present that the driver is ready to receive more output
513 * data.
514 */
515void tty_wakeup(struct tty_struct *tty)
516{
517 struct tty_ldisc *ld;
518
519 if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) {
520 ld = tty_ldisc_ref(tty);
521 if (ld) {
522 if (ld->ops->write_wakeup)
523 ld->ops->write_wakeup(tty);
524 tty_ldisc_deref(ld);
525 }
526 }
527 wake_up_interruptible_poll(&tty->write_wait, EPOLLOUT);
528}
529EXPORT_SYMBOL_GPL(tty_wakeup);
530
531/**
532 * tty_release_redirect - Release a redirect on a pty if present
533 * @tty: tty device
534 *
535 * This is available to the pty code so if the master closes, if the slave is a
536 * redirect it can release the redirect.
537 */
538static struct file *tty_release_redirect(struct tty_struct *tty)
539{
540 struct file *f = NULL;
541
542 spin_lock(&redirect_lock);
543 if (redirect && file_tty(redirect) == tty) {
544 f = redirect;
545 redirect = NULL;
546 }
547 spin_unlock(&redirect_lock);
548
549 return f;
550}
551
552/**
553 * __tty_hangup - actual handler for hangup events
554 * @tty: tty device
555 * @exit_session: if non-zero, signal all foreground group processes
556 *
557 * This can be called by a "kworker" kernel thread. That is process synchronous
558 * but doesn't hold any locks, so we need to make sure we have the appropriate
559 * locks for what we're doing.
560 *
561 * The hangup event clears any pending redirections onto the hung up device. It
562 * ensures future writes will error and it does the needed line discipline
563 * hangup and signal delivery. The tty object itself remains intact.
564 *
565 * Locking:
566 * * BTM
567 *
568 * * redirect lock for undoing redirection
569 * * file list lock for manipulating list of ttys
570 * * tty_ldiscs_lock from called functions
571 * * termios_rwsem resetting termios data
572 * * tasklist_lock to walk task list for hangup event
573 *
574 * * ->siglock to protect ->signal/->sighand
575 *
576 */
577static void __tty_hangup(struct tty_struct *tty, int exit_session)
578{
579 struct file *cons_filp = NULL;
580 struct file *filp, *f;
581 struct tty_file_private *priv;
582 int closecount = 0, n;
583 int refs;
584
585 if (!tty)
586 return;
587
588 f = tty_release_redirect(tty);
589
590 tty_lock(tty);
591
592 if (test_bit(TTY_HUPPED, &tty->flags)) {
593 tty_unlock(tty);
594 return;
595 }
596
597 /*
598 * Some console devices aren't actually hung up for technical and
599 * historical reasons, which can lead to indefinite interruptible
600 * sleep in n_tty_read(). The following explicitly tells
601 * n_tty_read() to abort readers.
602 */
603 set_bit(TTY_HUPPING, &tty->flags);
604
605 /* inuse_filps is protected by the single tty lock,
606 * this really needs to change if we want to flush the
607 * workqueue with the lock held.
608 */
609 check_tty_count(tty, "tty_hangup");
610
611 spin_lock(&tty->files_lock);
612 /* This breaks for file handles being sent over AF_UNIX sockets ? */
613 list_for_each_entry(priv, &tty->tty_files, list) {
614 filp = priv->file;
615 if (filp->f_op->write_iter == redirected_tty_write)
616 cons_filp = filp;
617 if (filp->f_op->write_iter != tty_write)
618 continue;
619 closecount++;
620 __tty_fasync(-1, filp, 0); /* can't block */
621 filp->f_op = &hung_up_tty_fops;
622 }
623 spin_unlock(&tty->files_lock);
624
625 refs = tty_signal_session_leader(tty, exit_session);
626 /* Account for the p->signal references we killed */
627 while (refs--)
628 tty_kref_put(tty);
629
630 tty_ldisc_hangup(tty, cons_filp != NULL);
631
632 spin_lock_irq(&tty->ctrl.lock);
633 clear_bit(TTY_THROTTLED, &tty->flags);
634 clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
635 put_pid(tty->ctrl.session);
636 put_pid(tty->ctrl.pgrp);
637 tty->ctrl.session = NULL;
638 tty->ctrl.pgrp = NULL;
639 tty->ctrl.pktstatus = 0;
640 spin_unlock_irq(&tty->ctrl.lock);
641
642 /*
643 * If one of the devices matches a console pointer, we
644 * cannot just call hangup() because that will cause
645 * tty->count and state->count to go out of sync.
646 * So we just call close() the right number of times.
647 */
648 if (cons_filp) {
649 if (tty->ops->close)
650 for (n = 0; n < closecount; n++)
651 tty->ops->close(tty, cons_filp);
652 } else if (tty->ops->hangup)
653 tty->ops->hangup(tty);
654 /*
655 * We don't want to have driver/ldisc interactions beyond the ones
656 * we did here. The driver layer expects no calls after ->hangup()
657 * from the ldisc side, which is now guaranteed.
658 */
659 set_bit(TTY_HUPPED, &tty->flags);
660 clear_bit(TTY_HUPPING, &tty->flags);
661 tty_unlock(tty);
662
663 if (f)
664 fput(f);
665}
666
667static void do_tty_hangup(struct work_struct *work)
668{
669 struct tty_struct *tty =
670 container_of(work, struct tty_struct, hangup_work);
671
672 __tty_hangup(tty, 0);
673}
674
675/**
676 * tty_hangup - trigger a hangup event
677 * @tty: tty to hangup
678 *
679 * A carrier loss (virtual or otherwise) has occurred on @tty. Schedule a
680 * hangup sequence to run after this event.
681 */
682void tty_hangup(struct tty_struct *tty)
683{
684 tty_debug_hangup(tty, "hangup\n");
685 schedule_work(&tty->hangup_work);
686}
687EXPORT_SYMBOL(tty_hangup);
688
689/**
690 * tty_vhangup - process vhangup
691 * @tty: tty to hangup
692 *
693 * The user has asked via system call for the terminal to be hung up. We do
694 * this synchronously so that when the syscall returns the process is complete.
695 * That guarantee is necessary for security reasons.
696 */
697void tty_vhangup(struct tty_struct *tty)
698{
699 tty_debug_hangup(tty, "vhangup\n");
700 __tty_hangup(tty, 0);
701}
702EXPORT_SYMBOL(tty_vhangup);
703
704
705/**
706 * tty_vhangup_self - process vhangup for own ctty
707 *
708 * Perform a vhangup on the current controlling tty
709 */
710void tty_vhangup_self(void)
711{
712 struct tty_struct *tty;
713
714 tty = get_current_tty();
715 if (tty) {
716 tty_vhangup(tty);
717 tty_kref_put(tty);
718 }
719}
720
721/**
722 * tty_vhangup_session - hangup session leader exit
723 * @tty: tty to hangup
724 *
725 * The session leader is exiting and hanging up its controlling terminal.
726 * Every process in the foreground process group is signalled %SIGHUP.
727 *
728 * We do this synchronously so that when the syscall returns the process is
729 * complete. That guarantee is necessary for security reasons.
730 */
731void tty_vhangup_session(struct tty_struct *tty)
732{
733 tty_debug_hangup(tty, "session hangup\n");
734 __tty_hangup(tty, 1);
735}
736
737/**
738 * tty_hung_up_p - was tty hung up
739 * @filp: file pointer of tty
740 *
741 * Return: true if the tty has been subject to a vhangup or a carrier loss
742 */
743int tty_hung_up_p(struct file *filp)
744{
745 return (filp && filp->f_op == &hung_up_tty_fops);
746}
747EXPORT_SYMBOL(tty_hung_up_p);
748
749void __stop_tty(struct tty_struct *tty)
750{
751 if (tty->flow.stopped)
752 return;
753 tty->flow.stopped = true;
754 if (tty->ops->stop)
755 tty->ops->stop(tty);
756}
757
758/**
759 * stop_tty - propagate flow control
760 * @tty: tty to stop
761 *
762 * Perform flow control to the driver. May be called on an already stopped
763 * device and will not re-call the &tty_driver->stop() method.
764 *
765 * This functionality is used by both the line disciplines for halting incoming
766 * flow and by the driver. It may therefore be called from any context, may be
767 * under the tty %atomic_write_lock but not always.
768 *
769 * Locking:
770 * flow.lock
771 */
772void stop_tty(struct tty_struct *tty)
773{
774 unsigned long flags;
775
776 spin_lock_irqsave(&tty->flow.lock, flags);
777 __stop_tty(tty);
778 spin_unlock_irqrestore(&tty->flow.lock, flags);
779}
780EXPORT_SYMBOL(stop_tty);
781
782void __start_tty(struct tty_struct *tty)
783{
784 if (!tty->flow.stopped || tty->flow.tco_stopped)
785 return;
786 tty->flow.stopped = false;
787 if (tty->ops->start)
788 tty->ops->start(tty);
789 tty_wakeup(tty);
790}
791
792/**
793 * start_tty - propagate flow control
794 * @tty: tty to start
795 *
796 * Start a tty that has been stopped if at all possible. If @tty was previously
797 * stopped and is now being started, the &tty_driver->start() method is invoked
798 * and the line discipline woken.
799 *
800 * Locking:
801 * flow.lock
802 */
803void start_tty(struct tty_struct *tty)
804{
805 unsigned long flags;
806
807 spin_lock_irqsave(&tty->flow.lock, flags);
808 __start_tty(tty);
809 spin_unlock_irqrestore(&tty->flow.lock, flags);
810}
811EXPORT_SYMBOL(start_tty);
812
813static void tty_update_time(struct tty_struct *tty, bool mtime)
814{
815 time64_t sec = ktime_get_real_seconds();
816 struct tty_file_private *priv;
817
818 spin_lock(&tty->files_lock);
819 list_for_each_entry(priv, &tty->tty_files, list) {
820 struct inode *inode = file_inode(priv->file);
821 struct timespec64 time = mtime ? inode_get_mtime(inode) : inode_get_atime(inode);
822
823 /*
824 * We only care if the two values differ in anything other than the
825 * lower three bits (i.e every 8 seconds). If so, then we can update
826 * the time of the tty device, otherwise it could be construded as a
827 * security leak to let userspace know the exact timing of the tty.
828 */
829 if ((sec ^ time.tv_sec) & ~7) {
830 if (mtime)
831 inode_set_mtime(inode, sec, 0);
832 else
833 inode_set_atime(inode, sec, 0);
834 }
835 }
836 spin_unlock(&tty->files_lock);
837}
838
839/*
840 * Iterate on the ldisc ->read() function until we've gotten all
841 * the data the ldisc has for us.
842 *
843 * The "cookie" is something that the ldisc read function can fill
844 * in to let us know that there is more data to be had.
845 *
846 * We promise to continue to call the ldisc until it stops returning
847 * data or clears the cookie. The cookie may be something that the
848 * ldisc maintains state for and needs to free.
849 */
850static ssize_t iterate_tty_read(struct tty_ldisc *ld, struct tty_struct *tty,
851 struct file *file, struct iov_iter *to)
852{
853 void *cookie = NULL;
854 unsigned long offset = 0;
855 ssize_t retval = 0;
856 size_t copied, count = iov_iter_count(to);
857 u8 kernel_buf[64];
858
859 do {
860 ssize_t size = min(count, sizeof(kernel_buf));
861
862 size = ld->ops->read(tty, file, kernel_buf, size, &cookie, offset);
863 if (!size)
864 break;
865
866 if (size < 0) {
867 /* Did we have an earlier error (ie -EFAULT)? */
868 if (retval)
869 break;
870 retval = size;
871
872 /*
873 * -EOVERFLOW means we didn't have enough space
874 * for a whole packet, and we shouldn't return
875 * a partial result.
876 */
877 if (retval == -EOVERFLOW)
878 offset = 0;
879 break;
880 }
881
882 copied = copy_to_iter(kernel_buf, size, to);
883 offset += copied;
884 count -= copied;
885
886 /*
887 * If the user copy failed, we still need to do another ->read()
888 * call if we had a cookie to let the ldisc clear up.
889 *
890 * But make sure size is zeroed.
891 */
892 if (unlikely(copied != size)) {
893 count = 0;
894 retval = -EFAULT;
895 }
896 } while (cookie);
897
898 /* We always clear tty buffer in case they contained passwords */
899 memzero_explicit(kernel_buf, sizeof(kernel_buf));
900 return offset ? offset : retval;
901}
902
903
904/**
905 * tty_read - read method for tty device files
906 * @iocb: kernel I/O control block
907 * @to: destination for the data read
908 *
909 * Perform the read system call function on this terminal device. Checks
910 * for hung up devices before calling the line discipline method.
911 *
912 * Locking:
913 * Locks the line discipline internally while needed. Multiple read calls
914 * may be outstanding in parallel.
915 */
916static ssize_t tty_read(struct kiocb *iocb, struct iov_iter *to)
917{
918 struct file *file = iocb->ki_filp;
919 struct inode *inode = file_inode(file);
920 struct tty_struct *tty = file_tty(file);
921 struct tty_ldisc *ld;
922 ssize_t ret;
923
924 if (tty_paranoia_check(tty, inode, "tty_read"))
925 return -EIO;
926 if (!tty || tty_io_error(tty))
927 return -EIO;
928
929 /* We want to wait for the line discipline to sort out in this
930 * situation.
931 */
932 ld = tty_ldisc_ref_wait(tty);
933 if (!ld)
934 return hung_up_tty_read(iocb, to);
935 ret = -EIO;
936 if (ld->ops->read)
937 ret = iterate_tty_read(ld, tty, file, to);
938 tty_ldisc_deref(ld);
939
940 if (ret > 0)
941 tty_update_time(tty, false);
942
943 return ret;
944}
945
946void tty_write_unlock(struct tty_struct *tty)
947{
948 mutex_unlock(&tty->atomic_write_lock);
949 wake_up_interruptible_poll(&tty->write_wait, EPOLLOUT);
950}
951
952int tty_write_lock(struct tty_struct *tty, bool ndelay)
953{
954 if (!mutex_trylock(&tty->atomic_write_lock)) {
955 if (ndelay)
956 return -EAGAIN;
957 if (mutex_lock_interruptible(&tty->atomic_write_lock))
958 return -ERESTARTSYS;
959 }
960 return 0;
961}
962
963/*
964 * Split writes up in sane blocksizes to avoid
965 * denial-of-service type attacks
966 */
967static ssize_t iterate_tty_write(struct tty_ldisc *ld, struct tty_struct *tty,
968 struct file *file, struct iov_iter *from)
969{
970 size_t chunk, count = iov_iter_count(from);
971 ssize_t ret, written = 0;
972
973 ret = tty_write_lock(tty, file->f_flags & O_NDELAY);
974 if (ret < 0)
975 return ret;
976
977 /*
978 * We chunk up writes into a temporary buffer. This
979 * simplifies low-level drivers immensely, since they
980 * don't have locking issues and user mode accesses.
981 *
982 * But if TTY_NO_WRITE_SPLIT is set, we should use a
983 * big chunk-size..
984 *
985 * The default chunk-size is 2kB, because the NTTY
986 * layer has problems with bigger chunks. It will
987 * claim to be able to handle more characters than
988 * it actually does.
989 */
990 chunk = 2048;
991 if (test_bit(TTY_NO_WRITE_SPLIT, &tty->flags))
992 chunk = 65536;
993 if (count < chunk)
994 chunk = count;
995
996 /* write_buf/write_cnt is protected by the atomic_write_lock mutex */
997 if (tty->write_cnt < chunk) {
998 u8 *buf_chunk;
999
1000 if (chunk < 1024)
1001 chunk = 1024;
1002
1003 buf_chunk = kvmalloc(chunk, GFP_KERNEL | __GFP_RETRY_MAYFAIL);
1004 if (!buf_chunk) {
1005 ret = -ENOMEM;
1006 goto out;
1007 }
1008 kvfree(tty->write_buf);
1009 tty->write_cnt = chunk;
1010 tty->write_buf = buf_chunk;
1011 }
1012
1013 /* Do the write .. */
1014 for (;;) {
1015 size_t size = min(chunk, count);
1016
1017 ret = -EFAULT;
1018 if (copy_from_iter(tty->write_buf, size, from) != size)
1019 break;
1020
1021 ret = ld->ops->write(tty, file, tty->write_buf, size);
1022 if (ret <= 0)
1023 break;
1024
1025 written += ret;
1026 if (ret > size)
1027 break;
1028
1029 /* FIXME! Have Al check this! */
1030 if (ret != size)
1031 iov_iter_revert(from, size-ret);
1032
1033 count -= ret;
1034 if (!count)
1035 break;
1036 ret = -ERESTARTSYS;
1037 if (signal_pending(current))
1038 break;
1039 cond_resched();
1040 }
1041 if (written) {
1042 tty_update_time(tty, true);
1043 ret = written;
1044 }
1045out:
1046 tty_write_unlock(tty);
1047 return ret;
1048}
1049
1050#ifdef CONFIG_PRINT_QUOTA_WARNING
1051/**
1052 * tty_write_message - write a message to a certain tty, not just the console.
1053 * @tty: the destination tty_struct
1054 * @msg: the message to write
1055 *
1056 * This is used for messages that need to be redirected to a specific tty. We
1057 * don't put it into the syslog queue right now maybe in the future if really
1058 * needed.
1059 *
1060 * We must still hold the BTM and test the CLOSING flag for the moment.
1061 *
1062 * This function is DEPRECATED, do not use in new code.
1063 */
1064void tty_write_message(struct tty_struct *tty, char *msg)
1065{
1066 if (tty) {
1067 mutex_lock(&tty->atomic_write_lock);
1068 tty_lock(tty);
1069 if (tty->ops->write && tty->count > 0)
1070 tty->ops->write(tty, msg, strlen(msg));
1071 tty_unlock(tty);
1072 tty_write_unlock(tty);
1073 }
1074}
1075#endif
1076
1077static ssize_t file_tty_write(struct file *file, struct kiocb *iocb, struct iov_iter *from)
1078{
1079 struct tty_struct *tty = file_tty(file);
1080 struct tty_ldisc *ld;
1081 ssize_t ret;
1082
1083 if (tty_paranoia_check(tty, file_inode(file), "tty_write"))
1084 return -EIO;
1085 if (!tty || !tty->ops->write || tty_io_error(tty))
1086 return -EIO;
1087 /* Short term debug to catch buggy drivers */
1088 if (tty->ops->write_room == NULL)
1089 tty_err(tty, "missing write_room method\n");
1090 ld = tty_ldisc_ref_wait(tty);
1091 if (!ld)
1092 return hung_up_tty_write(iocb, from);
1093 if (!ld->ops->write)
1094 ret = -EIO;
1095 else
1096 ret = iterate_tty_write(ld, tty, file, from);
1097 tty_ldisc_deref(ld);
1098 return ret;
1099}
1100
1101/**
1102 * tty_write - write method for tty device file
1103 * @iocb: kernel I/O control block
1104 * @from: iov_iter with data to write
1105 *
1106 * Write data to a tty device via the line discipline.
1107 *
1108 * Locking:
1109 * Locks the line discipline as required
1110 * Writes to the tty driver are serialized by the atomic_write_lock
1111 * and are then processed in chunks to the device. The line
1112 * discipline write method will not be invoked in parallel for
1113 * each device.
1114 */
1115static ssize_t tty_write(struct kiocb *iocb, struct iov_iter *from)
1116{
1117 return file_tty_write(iocb->ki_filp, iocb, from);
1118}
1119
1120ssize_t redirected_tty_write(struct kiocb *iocb, struct iov_iter *iter)
1121{
1122 struct file *p = NULL;
1123
1124 spin_lock(&redirect_lock);
1125 if (redirect)
1126 p = get_file(redirect);
1127 spin_unlock(&redirect_lock);
1128
1129 /*
1130 * We know the redirected tty is just another tty, we can
1131 * call file_tty_write() directly with that file pointer.
1132 */
1133 if (p) {
1134 ssize_t res;
1135
1136 res = file_tty_write(p, iocb, iter);
1137 fput(p);
1138 return res;
1139 }
1140 return tty_write(iocb, iter);
1141}
1142
1143/**
1144 * tty_send_xchar - send priority character
1145 * @tty: the tty to send to
1146 * @ch: xchar to send
1147 *
1148 * Send a high priority character to the tty even if stopped.
1149 *
1150 * Locking: none for xchar method, write ordering for write method.
1151 */
1152int tty_send_xchar(struct tty_struct *tty, u8 ch)
1153{
1154 bool was_stopped = tty->flow.stopped;
1155
1156 if (tty->ops->send_xchar) {
1157 down_read(&tty->termios_rwsem);
1158 tty->ops->send_xchar(tty, ch);
1159 up_read(&tty->termios_rwsem);
1160 return 0;
1161 }
1162
1163 if (tty_write_lock(tty, false) < 0)
1164 return -ERESTARTSYS;
1165
1166 down_read(&tty->termios_rwsem);
1167 if (was_stopped)
1168 start_tty(tty);
1169 tty->ops->write(tty, &ch, 1);
1170 if (was_stopped)
1171 stop_tty(tty);
1172 up_read(&tty->termios_rwsem);
1173 tty_write_unlock(tty);
1174 return 0;
1175}
1176
1177/**
1178 * pty_line_name - generate name for a pty
1179 * @driver: the tty driver in use
1180 * @index: the minor number
1181 * @p: output buffer of at least 6 bytes
1182 *
1183 * Generate a name from a @driver reference and write it to the output buffer
1184 * @p.
1185 *
1186 * Locking: None
1187 */
1188static void pty_line_name(struct tty_driver *driver, int index, char *p)
1189{
1190 static const char ptychar[] = "pqrstuvwxyzabcde";
1191 int i = index + driver->name_base;
1192 /* ->name is initialized to "ttyp", but "tty" is expected */
1193 sprintf(p, "%s%c%x",
1194 driver->subtype == PTY_TYPE_SLAVE ? "tty" : driver->name,
1195 ptychar[i >> 4 & 0xf], i & 0xf);
1196}
1197
1198/**
1199 * tty_line_name - generate name for a tty
1200 * @driver: the tty driver in use
1201 * @index: the minor number
1202 * @p: output buffer of at least 7 bytes
1203 *
1204 * Generate a name from a @driver reference and write it to the output buffer
1205 * @p.
1206 *
1207 * Locking: None
1208 */
1209static ssize_t tty_line_name(struct tty_driver *driver, int index, char *p)
1210{
1211 if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE)
1212 return sprintf(p, "%s", driver->name);
1213 else
1214 return sprintf(p, "%s%d", driver->name,
1215 index + driver->name_base);
1216}
1217
1218/**
1219 * tty_driver_lookup_tty() - find an existing tty, if any
1220 * @driver: the driver for the tty
1221 * @file: file object
1222 * @idx: the minor number
1223 *
1224 * Return: the tty, if found. If not found, return %NULL or ERR_PTR() if the
1225 * driver lookup() method returns an error.
1226 *
1227 * Locking: tty_mutex must be held. If the tty is found, bump the tty kref.
1228 */
1229static struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver,
1230 struct file *file, int idx)
1231{
1232 struct tty_struct *tty;
1233
1234 if (driver->ops->lookup) {
1235 if (!file)
1236 tty = ERR_PTR(-EIO);
1237 else
1238 tty = driver->ops->lookup(driver, file, idx);
1239 } else {
1240 if (idx >= driver->num)
1241 return ERR_PTR(-EINVAL);
1242 tty = driver->ttys[idx];
1243 }
1244 if (!IS_ERR(tty))
1245 tty_kref_get(tty);
1246 return tty;
1247}
1248
1249/**
1250 * tty_init_termios - helper for termios setup
1251 * @tty: the tty to set up
1252 *
1253 * Initialise the termios structure for this tty. This runs under the
1254 * %tty_mutex currently so we can be relaxed about ordering.
1255 */
1256void tty_init_termios(struct tty_struct *tty)
1257{
1258 struct ktermios *tp;
1259 int idx = tty->index;
1260
1261 if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
1262 tty->termios = tty->driver->init_termios;
1263 else {
1264 /* Check for lazy saved data */
1265 tp = tty->driver->termios[idx];
1266 if (tp != NULL) {
1267 tty->termios = *tp;
1268 tty->termios.c_line = tty->driver->init_termios.c_line;
1269 } else
1270 tty->termios = tty->driver->init_termios;
1271 }
1272 /* Compatibility until drivers always set this */
1273 tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios);
1274 tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios);
1275}
1276EXPORT_SYMBOL_GPL(tty_init_termios);
1277
1278/**
1279 * tty_standard_install - usual tty->ops->install
1280 * @driver: the driver for the tty
1281 * @tty: the tty
1282 *
1283 * If the @driver overrides @tty->ops->install, it still can call this function
1284 * to perform the standard install operations.
1285 */
1286int tty_standard_install(struct tty_driver *driver, struct tty_struct *tty)
1287{
1288 tty_init_termios(tty);
1289 tty_driver_kref_get(driver);
1290 tty->count++;
1291 driver->ttys[tty->index] = tty;
1292 return 0;
1293}
1294EXPORT_SYMBOL_GPL(tty_standard_install);
1295
1296/**
1297 * tty_driver_install_tty() - install a tty entry in the driver
1298 * @driver: the driver for the tty
1299 * @tty: the tty
1300 *
1301 * Install a tty object into the driver tables. The @tty->index field will be
1302 * set by the time this is called. This method is responsible for ensuring any
1303 * need additional structures are allocated and configured.
1304 *
1305 * Locking: tty_mutex for now
1306 */
1307static int tty_driver_install_tty(struct tty_driver *driver,
1308 struct tty_struct *tty)
1309{
1310 return driver->ops->install ? driver->ops->install(driver, tty) :
1311 tty_standard_install(driver, tty);
1312}
1313
1314/**
1315 * tty_driver_remove_tty() - remove a tty from the driver tables
1316 * @driver: the driver for the tty
1317 * @tty: tty to remove
1318 *
1319 * Remove a tty object from the driver tables. The tty->index field will be set
1320 * by the time this is called.
1321 *
1322 * Locking: tty_mutex for now
1323 */
1324static void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty)
1325{
1326 if (driver->ops->remove)
1327 driver->ops->remove(driver, tty);
1328 else
1329 driver->ttys[tty->index] = NULL;
1330}
1331
1332/**
1333 * tty_reopen() - fast re-open of an open tty
1334 * @tty: the tty to open
1335 *
1336 * Re-opens on master ptys are not allowed and return -%EIO.
1337 *
1338 * Locking: Caller must hold tty_lock
1339 * Return: 0 on success, -errno on error.
1340 */
1341static int tty_reopen(struct tty_struct *tty)
1342{
1343 struct tty_driver *driver = tty->driver;
1344 struct tty_ldisc *ld;
1345 int retval = 0;
1346
1347 if (driver->type == TTY_DRIVER_TYPE_PTY &&
1348 driver->subtype == PTY_TYPE_MASTER)
1349 return -EIO;
1350
1351 if (!tty->count)
1352 return -EAGAIN;
1353
1354 if (test_bit(TTY_EXCLUSIVE, &tty->flags) && !capable(CAP_SYS_ADMIN))
1355 return -EBUSY;
1356
1357 ld = tty_ldisc_ref_wait(tty);
1358 if (ld) {
1359 tty_ldisc_deref(ld);
1360 } else {
1361 retval = tty_ldisc_lock(tty, 5 * HZ);
1362 if (retval)
1363 return retval;
1364
1365 if (!tty->ldisc)
1366 retval = tty_ldisc_reinit(tty, tty->termios.c_line);
1367 tty_ldisc_unlock(tty);
1368 }
1369
1370 if (retval == 0)
1371 tty->count++;
1372
1373 return retval;
1374}
1375
1376/**
1377 * tty_init_dev - initialise a tty device
1378 * @driver: tty driver we are opening a device on
1379 * @idx: device index
1380 *
1381 * Prepare a tty device. This may not be a "new" clean device but could also be
1382 * an active device. The pty drivers require special handling because of this.
1383 *
1384 * Locking:
1385 * The function is called under the tty_mutex, which protects us from the
1386 * tty struct or driver itself going away.
1387 *
1388 * On exit the tty device has the line discipline attached and a reference
1389 * count of 1. If a pair was created for pty/tty use and the other was a pty
1390 * master then it too has a reference count of 1.
1391 *
1392 * WSH 06/09/97: Rewritten to remove races and properly clean up after a failed
1393 * open. The new code protects the open with a mutex, so it's really quite
1394 * straightforward. The mutex locking can probably be relaxed for the (most
1395 * common) case of reopening a tty.
1396 *
1397 * Return: new tty structure
1398 */
1399struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
1400{
1401 struct tty_struct *tty;
1402 int retval;
1403
1404 /*
1405 * First time open is complex, especially for PTY devices.
1406 * This code guarantees that either everything succeeds and the
1407 * TTY is ready for operation, or else the table slots are vacated
1408 * and the allocated memory released. (Except that the termios
1409 * may be retained.)
1410 */
1411
1412 if (!try_module_get(driver->owner))
1413 return ERR_PTR(-ENODEV);
1414
1415 tty = alloc_tty_struct(driver, idx);
1416 if (!tty) {
1417 retval = -ENOMEM;
1418 goto err_module_put;
1419 }
1420
1421 tty_lock(tty);
1422 retval = tty_driver_install_tty(driver, tty);
1423 if (retval < 0)
1424 goto err_free_tty;
1425
1426 if (!tty->port)
1427 tty->port = driver->ports[idx];
1428
1429 if (WARN_RATELIMIT(!tty->port,
1430 "%s: %s driver does not set tty->port. This would crash the kernel. Fix the driver!\n",
1431 __func__, tty->driver->name)) {
1432 retval = -EINVAL;
1433 goto err_release_lock;
1434 }
1435
1436 retval = tty_ldisc_lock(tty, 5 * HZ);
1437 if (retval)
1438 goto err_release_lock;
1439 tty->port->itty = tty;
1440
1441 /*
1442 * Structures all installed ... call the ldisc open routines.
1443 * If we fail here just call release_tty to clean up. No need
1444 * to decrement the use counts, as release_tty doesn't care.
1445 */
1446 retval = tty_ldisc_setup(tty, tty->link);
1447 if (retval)
1448 goto err_release_tty;
1449 tty_ldisc_unlock(tty);
1450 /* Return the tty locked so that it cannot vanish under the caller */
1451 return tty;
1452
1453err_free_tty:
1454 tty_unlock(tty);
1455 free_tty_struct(tty);
1456err_module_put:
1457 module_put(driver->owner);
1458 return ERR_PTR(retval);
1459
1460 /* call the tty release_tty routine to clean out this slot */
1461err_release_tty:
1462 tty_ldisc_unlock(tty);
1463 tty_info_ratelimited(tty, "ldisc open failed (%d), clearing slot %d\n",
1464 retval, idx);
1465err_release_lock:
1466 tty_unlock(tty);
1467 release_tty(tty, idx);
1468 return ERR_PTR(retval);
1469}
1470
1471/**
1472 * tty_save_termios() - save tty termios data in driver table
1473 * @tty: tty whose termios data to save
1474 *
1475 * Locking: Caller guarantees serialisation with tty_init_termios().
1476 */
1477void tty_save_termios(struct tty_struct *tty)
1478{
1479 struct ktermios *tp;
1480 int idx = tty->index;
1481
1482 /* If the port is going to reset then it has no termios to save */
1483 if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
1484 return;
1485
1486 /* Stash the termios data */
1487 tp = tty->driver->termios[idx];
1488 if (tp == NULL) {
1489 tp = kmalloc(sizeof(*tp), GFP_KERNEL);
1490 if (tp == NULL)
1491 return;
1492 tty->driver->termios[idx] = tp;
1493 }
1494 *tp = tty->termios;
1495}
1496EXPORT_SYMBOL_GPL(tty_save_termios);
1497
1498/**
1499 * tty_flush_works - flush all works of a tty/pty pair
1500 * @tty: tty device to flush works for (or either end of a pty pair)
1501 *
1502 * Sync flush all works belonging to @tty (and the 'other' tty).
1503 */
1504static void tty_flush_works(struct tty_struct *tty)
1505{
1506 flush_work(&tty->SAK_work);
1507 flush_work(&tty->hangup_work);
1508 if (tty->link) {
1509 flush_work(&tty->link->SAK_work);
1510 flush_work(&tty->link->hangup_work);
1511 }
1512}
1513
1514/**
1515 * release_one_tty - release tty structure memory
1516 * @work: work of tty we are obliterating
1517 *
1518 * Releases memory associated with a tty structure, and clears out the
1519 * driver table slots. This function is called when a device is no longer
1520 * in use. It also gets called when setup of a device fails.
1521 *
1522 * Locking:
1523 * takes the file list lock internally when working on the list of ttys
1524 * that the driver keeps.
1525 *
1526 * This method gets called from a work queue so that the driver private
1527 * cleanup ops can sleep (needed for USB at least)
1528 */
1529static void release_one_tty(struct work_struct *work)
1530{
1531 struct tty_struct *tty =
1532 container_of(work, struct tty_struct, hangup_work);
1533 struct tty_driver *driver = tty->driver;
1534 struct module *owner = driver->owner;
1535
1536 if (tty->ops->cleanup)
1537 tty->ops->cleanup(tty);
1538
1539 tty_driver_kref_put(driver);
1540 module_put(owner);
1541
1542 spin_lock(&tty->files_lock);
1543 list_del_init(&tty->tty_files);
1544 spin_unlock(&tty->files_lock);
1545
1546 put_pid(tty->ctrl.pgrp);
1547 put_pid(tty->ctrl.session);
1548 free_tty_struct(tty);
1549}
1550
1551static void queue_release_one_tty(struct kref *kref)
1552{
1553 struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
1554
1555 /* The hangup queue is now free so we can reuse it rather than
1556 * waste a chunk of memory for each port.
1557 */
1558 INIT_WORK(&tty->hangup_work, release_one_tty);
1559 schedule_work(&tty->hangup_work);
1560}
1561
1562/**
1563 * tty_kref_put - release a tty kref
1564 * @tty: tty device
1565 *
1566 * Release a reference to the @tty device and if need be let the kref layer
1567 * destruct the object for us.
1568 */
1569void tty_kref_put(struct tty_struct *tty)
1570{
1571 if (tty)
1572 kref_put(&tty->kref, queue_release_one_tty);
1573}
1574EXPORT_SYMBOL(tty_kref_put);
1575
1576/**
1577 * release_tty - release tty structure memory
1578 * @tty: tty device release
1579 * @idx: index of the tty device release
1580 *
1581 * Release both @tty and a possible linked partner (think pty pair),
1582 * and decrement the refcount of the backing module.
1583 *
1584 * Locking:
1585 * tty_mutex
1586 * takes the file list lock internally when working on the list of ttys
1587 * that the driver keeps.
1588 */
1589static void release_tty(struct tty_struct *tty, int idx)
1590{
1591 /* This should always be true but check for the moment */
1592 WARN_ON(tty->index != idx);
1593 WARN_ON(!mutex_is_locked(&tty_mutex));
1594 if (tty->ops->shutdown)
1595 tty->ops->shutdown(tty);
1596 tty_save_termios(tty);
1597 tty_driver_remove_tty(tty->driver, tty);
1598 if (tty->port)
1599 tty->port->itty = NULL;
1600 if (tty->link)
1601 tty->link->port->itty = NULL;
1602 if (tty->port)
1603 tty_buffer_cancel_work(tty->port);
1604 if (tty->link)
1605 tty_buffer_cancel_work(tty->link->port);
1606
1607 tty_kref_put(tty->link);
1608 tty_kref_put(tty);
1609}
1610
1611/**
1612 * tty_release_checks - check a tty before real release
1613 * @tty: tty to check
1614 * @idx: index of the tty
1615 *
1616 * Performs some paranoid checking before true release of the @tty. This is a
1617 * no-op unless %TTY_PARANOIA_CHECK is defined.
1618 */
1619static int tty_release_checks(struct tty_struct *tty, int idx)
1620{
1621#ifdef TTY_PARANOIA_CHECK
1622 if (idx < 0 || idx >= tty->driver->num) {
1623 tty_debug(tty, "bad idx %d\n", idx);
1624 return -1;
1625 }
1626
1627 /* not much to check for devpts */
1628 if (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)
1629 return 0;
1630
1631 if (tty != tty->driver->ttys[idx]) {
1632 tty_debug(tty, "bad driver table[%d] = %p\n",
1633 idx, tty->driver->ttys[idx]);
1634 return -1;
1635 }
1636 if (tty->driver->other) {
1637 struct tty_struct *o_tty = tty->link;
1638
1639 if (o_tty != tty->driver->other->ttys[idx]) {
1640 tty_debug(tty, "bad other table[%d] = %p\n",
1641 idx, tty->driver->other->ttys[idx]);
1642 return -1;
1643 }
1644 if (o_tty->link != tty) {
1645 tty_debug(tty, "bad link = %p\n", o_tty->link);
1646 return -1;
1647 }
1648 }
1649#endif
1650 return 0;
1651}
1652
1653/**
1654 * tty_kclose - closes tty opened by tty_kopen
1655 * @tty: tty device
1656 *
1657 * Performs the final steps to release and free a tty device. It is the same as
1658 * tty_release_struct() except that it also resets %TTY_PORT_KOPENED flag on
1659 * @tty->port.
1660 */
1661void tty_kclose(struct tty_struct *tty)
1662{
1663 /*
1664 * Ask the line discipline code to release its structures
1665 */
1666 tty_ldisc_release(tty);
1667
1668 /* Wait for pending work before tty destruction commences */
1669 tty_flush_works(tty);
1670
1671 tty_debug_hangup(tty, "freeing structure\n");
1672 /*
1673 * The release_tty function takes care of the details of clearing
1674 * the slots and preserving the termios structure.
1675 */
1676 mutex_lock(&tty_mutex);
1677 tty_port_set_kopened(tty->port, 0);
1678 release_tty(tty, tty->index);
1679 mutex_unlock(&tty_mutex);
1680}
1681EXPORT_SYMBOL_GPL(tty_kclose);
1682
1683/**
1684 * tty_release_struct - release a tty struct
1685 * @tty: tty device
1686 * @idx: index of the tty
1687 *
1688 * Performs the final steps to release and free a tty device. It is roughly the
1689 * reverse of tty_init_dev().
1690 */
1691void tty_release_struct(struct tty_struct *tty, int idx)
1692{
1693 /*
1694 * Ask the line discipline code to release its structures
1695 */
1696 tty_ldisc_release(tty);
1697
1698 /* Wait for pending work before tty destruction commmences */
1699 tty_flush_works(tty);
1700
1701 tty_debug_hangup(tty, "freeing structure\n");
1702 /*
1703 * The release_tty function takes care of the details of clearing
1704 * the slots and preserving the termios structure.
1705 */
1706 mutex_lock(&tty_mutex);
1707 release_tty(tty, idx);
1708 mutex_unlock(&tty_mutex);
1709}
1710EXPORT_SYMBOL_GPL(tty_release_struct);
1711
1712/**
1713 * tty_release - vfs callback for close
1714 * @inode: inode of tty
1715 * @filp: file pointer for handle to tty
1716 *
1717 * Called the last time each file handle is closed that references this tty.
1718 * There may however be several such references.
1719 *
1720 * Locking:
1721 * Takes BKL. See tty_release_dev().
1722 *
1723 * Even releasing the tty structures is a tricky business. We have to be very
1724 * careful that the structures are all released at the same time, as interrupts
1725 * might otherwise get the wrong pointers.
1726 *
1727 * WSH 09/09/97: rewritten to avoid some nasty race conditions that could
1728 * lead to double frees or releasing memory still in use.
1729 */
1730int tty_release(struct inode *inode, struct file *filp)
1731{
1732 struct tty_struct *tty = file_tty(filp);
1733 struct tty_struct *o_tty = NULL;
1734 int do_sleep, final;
1735 int idx;
1736 long timeout = 0;
1737 int once = 1;
1738
1739 if (tty_paranoia_check(tty, inode, __func__))
1740 return 0;
1741
1742 tty_lock(tty);
1743 check_tty_count(tty, __func__);
1744
1745 __tty_fasync(-1, filp, 0);
1746
1747 idx = tty->index;
1748 if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
1749 tty->driver->subtype == PTY_TYPE_MASTER)
1750 o_tty = tty->link;
1751
1752 if (tty_release_checks(tty, idx)) {
1753 tty_unlock(tty);
1754 return 0;
1755 }
1756
1757 tty_debug_hangup(tty, "releasing (count=%d)\n", tty->count);
1758
1759 if (tty->ops->close)
1760 tty->ops->close(tty, filp);
1761
1762 /* If tty is pty master, lock the slave pty (stable lock order) */
1763 tty_lock_slave(o_tty);
1764
1765 /*
1766 * Sanity check: if tty->count is going to zero, there shouldn't be
1767 * any waiters on tty->read_wait or tty->write_wait. We test the
1768 * wait queues and kick everyone out _before_ actually starting to
1769 * close. This ensures that we won't block while releasing the tty
1770 * structure.
1771 *
1772 * The test for the o_tty closing is necessary, since the master and
1773 * slave sides may close in any order. If the slave side closes out
1774 * first, its count will be one, since the master side holds an open.
1775 * Thus this test wouldn't be triggered at the time the slave closed,
1776 * so we do it now.
1777 */
1778 while (1) {
1779 do_sleep = 0;
1780
1781 if (tty->count <= 1) {
1782 if (waitqueue_active(&tty->read_wait)) {
1783 wake_up_poll(&tty->read_wait, EPOLLIN);
1784 do_sleep++;
1785 }
1786 if (waitqueue_active(&tty->write_wait)) {
1787 wake_up_poll(&tty->write_wait, EPOLLOUT);
1788 do_sleep++;
1789 }
1790 }
1791 if (o_tty && o_tty->count <= 1) {
1792 if (waitqueue_active(&o_tty->read_wait)) {
1793 wake_up_poll(&o_tty->read_wait, EPOLLIN);
1794 do_sleep++;
1795 }
1796 if (waitqueue_active(&o_tty->write_wait)) {
1797 wake_up_poll(&o_tty->write_wait, EPOLLOUT);
1798 do_sleep++;
1799 }
1800 }
1801 if (!do_sleep)
1802 break;
1803
1804 if (once) {
1805 once = 0;
1806 tty_warn(tty, "read/write wait queue active!\n");
1807 }
1808 schedule_timeout_killable(timeout);
1809 if (timeout < 120 * HZ)
1810 timeout = 2 * timeout + 1;
1811 else
1812 timeout = MAX_SCHEDULE_TIMEOUT;
1813 }
1814
1815 if (o_tty) {
1816 if (--o_tty->count < 0) {
1817 tty_warn(tty, "bad slave count (%d)\n", o_tty->count);
1818 o_tty->count = 0;
1819 }
1820 }
1821 if (--tty->count < 0) {
1822 tty_warn(tty, "bad tty->count (%d)\n", tty->count);
1823 tty->count = 0;
1824 }
1825
1826 /*
1827 * We've decremented tty->count, so we need to remove this file
1828 * descriptor off the tty->tty_files list; this serves two
1829 * purposes:
1830 * - check_tty_count sees the correct number of file descriptors
1831 * associated with this tty.
1832 * - do_tty_hangup no longer sees this file descriptor as
1833 * something that needs to be handled for hangups.
1834 */
1835 tty_del_file(filp);
1836
1837 /*
1838 * Perform some housekeeping before deciding whether to return.
1839 *
1840 * If _either_ side is closing, make sure there aren't any
1841 * processes that still think tty or o_tty is their controlling
1842 * tty.
1843 */
1844 if (!tty->count) {
1845 read_lock(&tasklist_lock);
1846 session_clear_tty(tty->ctrl.session);
1847 if (o_tty)
1848 session_clear_tty(o_tty->ctrl.session);
1849 read_unlock(&tasklist_lock);
1850 }
1851
1852 /* check whether both sides are closing ... */
1853 final = !tty->count && !(o_tty && o_tty->count);
1854
1855 tty_unlock_slave(o_tty);
1856 tty_unlock(tty);
1857
1858 /* At this point, the tty->count == 0 should ensure a dead tty
1859 * cannot be re-opened by a racing opener.
1860 */
1861
1862 if (!final)
1863 return 0;
1864
1865 tty_debug_hangup(tty, "final close\n");
1866
1867 tty_release_struct(tty, idx);
1868 return 0;
1869}
1870
1871/**
1872 * tty_open_current_tty - get locked tty of current task
1873 * @device: device number
1874 * @filp: file pointer to tty
1875 * @return: locked tty of the current task iff @device is /dev/tty
1876 *
1877 * Performs a re-open of the current task's controlling tty.
1878 *
1879 * We cannot return driver and index like for the other nodes because devpts
1880 * will not work then. It expects inodes to be from devpts FS.
1881 */
1882static struct tty_struct *tty_open_current_tty(dev_t device, struct file *filp)
1883{
1884 struct tty_struct *tty;
1885 int retval;
1886
1887 if (device != MKDEV(TTYAUX_MAJOR, 0))
1888 return NULL;
1889
1890 tty = get_current_tty();
1891 if (!tty)
1892 return ERR_PTR(-ENXIO);
1893
1894 filp->f_flags |= O_NONBLOCK; /* Don't let /dev/tty block */
1895 /* noctty = 1; */
1896 tty_lock(tty);
1897 tty_kref_put(tty); /* safe to drop the kref now */
1898
1899 retval = tty_reopen(tty);
1900 if (retval < 0) {
1901 tty_unlock(tty);
1902 tty = ERR_PTR(retval);
1903 }
1904 return tty;
1905}
1906
1907/**
1908 * tty_lookup_driver - lookup a tty driver for a given device file
1909 * @device: device number
1910 * @filp: file pointer to tty
1911 * @index: index for the device in the @return driver
1912 *
1913 * If returned value is not erroneous, the caller is responsible to decrement
1914 * the refcount by tty_driver_kref_put().
1915 *
1916 * Locking: %tty_mutex protects get_tty_driver()
1917 *
1918 * Return: driver for this inode (with increased refcount)
1919 */
1920static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp,
1921 int *index)
1922{
1923 struct tty_driver *driver = NULL;
1924
1925 switch (device) {
1926#ifdef CONFIG_VT
1927 case MKDEV(TTY_MAJOR, 0): {
1928 extern struct tty_driver *console_driver;
1929
1930 driver = tty_driver_kref_get(console_driver);
1931 *index = fg_console;
1932 break;
1933 }
1934#endif
1935 case MKDEV(TTYAUX_MAJOR, 1): {
1936 struct tty_driver *console_driver = console_device(index);
1937
1938 if (console_driver) {
1939 driver = tty_driver_kref_get(console_driver);
1940 if (driver && filp) {
1941 /* Don't let /dev/console block */
1942 filp->f_flags |= O_NONBLOCK;
1943 break;
1944 }
1945 }
1946 if (driver)
1947 tty_driver_kref_put(driver);
1948 return ERR_PTR(-ENODEV);
1949 }
1950 default:
1951 driver = get_tty_driver(device, index);
1952 if (!driver)
1953 return ERR_PTR(-ENODEV);
1954 break;
1955 }
1956 return driver;
1957}
1958
1959static struct tty_struct *tty_kopen(dev_t device, int shared)
1960{
1961 struct tty_struct *tty;
1962 struct tty_driver *driver;
1963 int index = -1;
1964
1965 mutex_lock(&tty_mutex);
1966 driver = tty_lookup_driver(device, NULL, &index);
1967 if (IS_ERR(driver)) {
1968 mutex_unlock(&tty_mutex);
1969 return ERR_CAST(driver);
1970 }
1971
1972 /* check whether we're reopening an existing tty */
1973 tty = tty_driver_lookup_tty(driver, NULL, index);
1974 if (IS_ERR(tty) || shared)
1975 goto out;
1976
1977 if (tty) {
1978 /* drop kref from tty_driver_lookup_tty() */
1979 tty_kref_put(tty);
1980 tty = ERR_PTR(-EBUSY);
1981 } else { /* tty_init_dev returns tty with the tty_lock held */
1982 tty = tty_init_dev(driver, index);
1983 if (IS_ERR(tty))
1984 goto out;
1985 tty_port_set_kopened(tty->port, 1);
1986 }
1987out:
1988 mutex_unlock(&tty_mutex);
1989 tty_driver_kref_put(driver);
1990 return tty;
1991}
1992
1993/**
1994 * tty_kopen_exclusive - open a tty device for kernel
1995 * @device: dev_t of device to open
1996 *
1997 * Opens tty exclusively for kernel. Performs the driver lookup, makes sure
1998 * it's not already opened and performs the first-time tty initialization.
1999 *
2000 * Claims the global %tty_mutex to serialize:
2001 * * concurrent first-time tty initialization
2002 * * concurrent tty driver removal w/ lookup
2003 * * concurrent tty removal from driver table
2004 *
2005 * Return: the locked initialized &tty_struct
2006 */
2007struct tty_struct *tty_kopen_exclusive(dev_t device)
2008{
2009 return tty_kopen(device, 0);
2010}
2011EXPORT_SYMBOL_GPL(tty_kopen_exclusive);
2012
2013/**
2014 * tty_kopen_shared - open a tty device for shared in-kernel use
2015 * @device: dev_t of device to open
2016 *
2017 * Opens an already existing tty for in-kernel use. Compared to
2018 * tty_kopen_exclusive() above it doesn't ensure to be the only user.
2019 *
2020 * Locking: identical to tty_kopen() above.
2021 */
2022struct tty_struct *tty_kopen_shared(dev_t device)
2023{
2024 return tty_kopen(device, 1);
2025}
2026EXPORT_SYMBOL_GPL(tty_kopen_shared);
2027
2028/**
2029 * tty_open_by_driver - open a tty device
2030 * @device: dev_t of device to open
2031 * @filp: file pointer to tty
2032 *
2033 * Performs the driver lookup, checks for a reopen, or otherwise performs the
2034 * first-time tty initialization.
2035 *
2036 *
2037 * Claims the global tty_mutex to serialize:
2038 * * concurrent first-time tty initialization
2039 * * concurrent tty driver removal w/ lookup
2040 * * concurrent tty removal from driver table
2041 *
2042 * Return: the locked initialized or re-opened &tty_struct
2043 */
2044static struct tty_struct *tty_open_by_driver(dev_t device,
2045 struct file *filp)
2046{
2047 struct tty_struct *tty;
2048 struct tty_driver *driver = NULL;
2049 int index = -1;
2050 int retval;
2051
2052 mutex_lock(&tty_mutex);
2053 driver = tty_lookup_driver(device, filp, &index);
2054 if (IS_ERR(driver)) {
2055 mutex_unlock(&tty_mutex);
2056 return ERR_CAST(driver);
2057 }
2058
2059 /* check whether we're reopening an existing tty */
2060 tty = tty_driver_lookup_tty(driver, filp, index);
2061 if (IS_ERR(tty)) {
2062 mutex_unlock(&tty_mutex);
2063 goto out;
2064 }
2065
2066 if (tty) {
2067 if (tty_port_kopened(tty->port)) {
2068 tty_kref_put(tty);
2069 mutex_unlock(&tty_mutex);
2070 tty = ERR_PTR(-EBUSY);
2071 goto out;
2072 }
2073 mutex_unlock(&tty_mutex);
2074 retval = tty_lock_interruptible(tty);
2075 tty_kref_put(tty); /* drop kref from tty_driver_lookup_tty() */
2076 if (retval) {
2077 if (retval == -EINTR)
2078 retval = -ERESTARTSYS;
2079 tty = ERR_PTR(retval);
2080 goto out;
2081 }
2082 retval = tty_reopen(tty);
2083 if (retval < 0) {
2084 tty_unlock(tty);
2085 tty = ERR_PTR(retval);
2086 }
2087 } else { /* Returns with the tty_lock held for now */
2088 tty = tty_init_dev(driver, index);
2089 mutex_unlock(&tty_mutex);
2090 }
2091out:
2092 tty_driver_kref_put(driver);
2093 return tty;
2094}
2095
2096/**
2097 * tty_open - open a tty device
2098 * @inode: inode of device file
2099 * @filp: file pointer to tty
2100 *
2101 * tty_open() and tty_release() keep up the tty count that contains the number
2102 * of opens done on a tty. We cannot use the inode-count, as different inodes
2103 * might point to the same tty.
2104 *
2105 * Open-counting is needed for pty masters, as well as for keeping track of
2106 * serial lines: DTR is dropped when the last close happens.
2107 * (This is not done solely through tty->count, now. - Ted 1/27/92)
2108 *
2109 * The termios state of a pty is reset on the first open so that settings don't
2110 * persist across reuse.
2111 *
2112 * Locking:
2113 * * %tty_mutex protects tty, tty_lookup_driver() and tty_init_dev().
2114 * * @tty->count should protect the rest.
2115 * * ->siglock protects ->signal/->sighand
2116 *
2117 * Note: the tty_unlock/lock cases without a ref are only safe due to %tty_mutex
2118 */
2119static int tty_open(struct inode *inode, struct file *filp)
2120{
2121 struct tty_struct *tty;
2122 int noctty, retval;
2123 dev_t device = inode->i_rdev;
2124 unsigned saved_flags = filp->f_flags;
2125
2126 nonseekable_open(inode, filp);
2127
2128retry_open:
2129 retval = tty_alloc_file(filp);
2130 if (retval)
2131 return -ENOMEM;
2132
2133 tty = tty_open_current_tty(device, filp);
2134 if (!tty)
2135 tty = tty_open_by_driver(device, filp);
2136
2137 if (IS_ERR(tty)) {
2138 tty_free_file(filp);
2139 retval = PTR_ERR(tty);
2140 if (retval != -EAGAIN || signal_pending(current))
2141 return retval;
2142 schedule();
2143 goto retry_open;
2144 }
2145
2146 tty_add_file(tty, filp);
2147
2148 check_tty_count(tty, __func__);
2149 tty_debug_hangup(tty, "opening (count=%d)\n", tty->count);
2150
2151 if (tty->ops->open)
2152 retval = tty->ops->open(tty, filp);
2153 else
2154 retval = -ENODEV;
2155 filp->f_flags = saved_flags;
2156
2157 if (retval) {
2158 tty_debug_hangup(tty, "open error %d, releasing\n", retval);
2159
2160 tty_unlock(tty); /* need to call tty_release without BTM */
2161 tty_release(inode, filp);
2162 if (retval != -ERESTARTSYS)
2163 return retval;
2164
2165 if (signal_pending(current))
2166 return retval;
2167
2168 schedule();
2169 /*
2170 * Need to reset f_op in case a hangup happened.
2171 */
2172 if (tty_hung_up_p(filp))
2173 filp->f_op = &tty_fops;
2174 goto retry_open;
2175 }
2176 clear_bit(TTY_HUPPED, &tty->flags);
2177
2178 noctty = (filp->f_flags & O_NOCTTY) ||
2179 (IS_ENABLED(CONFIG_VT) && device == MKDEV(TTY_MAJOR, 0)) ||
2180 device == MKDEV(TTYAUX_MAJOR, 1) ||
2181 (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
2182 tty->driver->subtype == PTY_TYPE_MASTER);
2183 if (!noctty)
2184 tty_open_proc_set_tty(filp, tty);
2185 tty_unlock(tty);
2186 return 0;
2187}
2188
2189
2190/**
2191 * tty_poll - check tty status
2192 * @filp: file being polled
2193 * @wait: poll wait structures to update
2194 *
2195 * Call the line discipline polling method to obtain the poll status of the
2196 * device.
2197 *
2198 * Locking: locks called line discipline but ldisc poll method may be
2199 * re-entered freely by other callers.
2200 */
2201static __poll_t tty_poll(struct file *filp, poll_table *wait)
2202{
2203 struct tty_struct *tty = file_tty(filp);
2204 struct tty_ldisc *ld;
2205 __poll_t ret = 0;
2206
2207 if (tty_paranoia_check(tty, file_inode(filp), "tty_poll"))
2208 return 0;
2209
2210 ld = tty_ldisc_ref_wait(tty);
2211 if (!ld)
2212 return hung_up_tty_poll(filp, wait);
2213 if (ld->ops->poll)
2214 ret = ld->ops->poll(tty, filp, wait);
2215 tty_ldisc_deref(ld);
2216 return ret;
2217}
2218
2219static int __tty_fasync(int fd, struct file *filp, int on)
2220{
2221 struct tty_struct *tty = file_tty(filp);
2222 unsigned long flags;
2223 int retval = 0;
2224
2225 if (tty_paranoia_check(tty, file_inode(filp), "tty_fasync"))
2226 goto out;
2227
2228 retval = fasync_helper(fd, filp, on, &tty->fasync);
2229 if (retval <= 0)
2230 goto out;
2231
2232 if (on) {
2233 enum pid_type type;
2234 struct pid *pid;
2235
2236 spin_lock_irqsave(&tty->ctrl.lock, flags);
2237 if (tty->ctrl.pgrp) {
2238 pid = tty->ctrl.pgrp;
2239 type = PIDTYPE_PGID;
2240 } else {
2241 pid = task_pid(current);
2242 type = PIDTYPE_TGID;
2243 }
2244 get_pid(pid);
2245 spin_unlock_irqrestore(&tty->ctrl.lock, flags);
2246 __f_setown(filp, pid, type, 0);
2247 put_pid(pid);
2248 retval = 0;
2249 }
2250out:
2251 return retval;
2252}
2253
2254static int tty_fasync(int fd, struct file *filp, int on)
2255{
2256 struct tty_struct *tty = file_tty(filp);
2257 int retval = -ENOTTY;
2258
2259 tty_lock(tty);
2260 if (!tty_hung_up_p(filp))
2261 retval = __tty_fasync(fd, filp, on);
2262 tty_unlock(tty);
2263
2264 return retval;
2265}
2266
2267static bool tty_legacy_tiocsti __read_mostly = IS_ENABLED(CONFIG_LEGACY_TIOCSTI);
2268/**
2269 * tiocsti - fake input character
2270 * @tty: tty to fake input into
2271 * @p: pointer to character
2272 *
2273 * Fake input to a tty device. Does the necessary locking and input management.
2274 *
2275 * FIXME: does not honour flow control ??
2276 *
2277 * Locking:
2278 * * Called functions take tty_ldiscs_lock
2279 * * current->signal->tty check is safe without locks
2280 */
2281static int tiocsti(struct tty_struct *tty, u8 __user *p)
2282{
2283 struct tty_ldisc *ld;
2284 u8 ch;
2285
2286 if (!tty_legacy_tiocsti && !capable(CAP_SYS_ADMIN))
2287 return -EIO;
2288
2289 if ((current->signal->tty != tty) && !capable(CAP_SYS_ADMIN))
2290 return -EPERM;
2291 if (get_user(ch, p))
2292 return -EFAULT;
2293 tty_audit_tiocsti(tty, ch);
2294 ld = tty_ldisc_ref_wait(tty);
2295 if (!ld)
2296 return -EIO;
2297 tty_buffer_lock_exclusive(tty->port);
2298 if (ld->ops->receive_buf)
2299 ld->ops->receive_buf(tty, &ch, NULL, 1);
2300 tty_buffer_unlock_exclusive(tty->port);
2301 tty_ldisc_deref(ld);
2302 return 0;
2303}
2304
2305/**
2306 * tiocgwinsz - implement window query ioctl
2307 * @tty: tty
2308 * @arg: user buffer for result
2309 *
2310 * Copies the kernel idea of the window size into the user buffer.
2311 *
2312 * Locking: @tty->winsize_mutex is taken to ensure the winsize data is
2313 * consistent.
2314 */
2315static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
2316{
2317 int err;
2318
2319 mutex_lock(&tty->winsize_mutex);
2320 err = copy_to_user(arg, &tty->winsize, sizeof(*arg));
2321 mutex_unlock(&tty->winsize_mutex);
2322
2323 return err ? -EFAULT : 0;
2324}
2325
2326/**
2327 * tty_do_resize - resize event
2328 * @tty: tty being resized
2329 * @ws: new dimensions
2330 *
2331 * Update the termios variables and send the necessary signals to peform a
2332 * terminal resize correctly.
2333 */
2334int tty_do_resize(struct tty_struct *tty, struct winsize *ws)
2335{
2336 struct pid *pgrp;
2337
2338 /* Lock the tty */
2339 mutex_lock(&tty->winsize_mutex);
2340 if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
2341 goto done;
2342
2343 /* Signal the foreground process group */
2344 pgrp = tty_get_pgrp(tty);
2345 if (pgrp)
2346 kill_pgrp(pgrp, SIGWINCH, 1);
2347 put_pid(pgrp);
2348
2349 tty->winsize = *ws;
2350done:
2351 mutex_unlock(&tty->winsize_mutex);
2352 return 0;
2353}
2354EXPORT_SYMBOL(tty_do_resize);
2355
2356/**
2357 * tiocswinsz - implement window size set ioctl
2358 * @tty: tty side of tty
2359 * @arg: user buffer for result
2360 *
2361 * Copies the user idea of the window size to the kernel. Traditionally this is
2362 * just advisory information but for the Linux console it actually has driver
2363 * level meaning and triggers a VC resize.
2364 *
2365 * Locking:
2366 * Driver dependent. The default do_resize method takes the tty termios
2367 * mutex and ctrl.lock. The console takes its own lock then calls into the
2368 * default method.
2369 */
2370static int tiocswinsz(struct tty_struct *tty, struct winsize __user *arg)
2371{
2372 struct winsize tmp_ws;
2373
2374 if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
2375 return -EFAULT;
2376
2377 if (tty->ops->resize)
2378 return tty->ops->resize(tty, &tmp_ws);
2379 else
2380 return tty_do_resize(tty, &tmp_ws);
2381}
2382
2383/**
2384 * tioccons - allow admin to move logical console
2385 * @file: the file to become console
2386 *
2387 * Allow the administrator to move the redirected console device.
2388 *
2389 * Locking: uses redirect_lock to guard the redirect information
2390 */
2391static int tioccons(struct file *file)
2392{
2393 if (!capable(CAP_SYS_ADMIN))
2394 return -EPERM;
2395 if (file->f_op->write_iter == redirected_tty_write) {
2396 struct file *f;
2397
2398 spin_lock(&redirect_lock);
2399 f = redirect;
2400 redirect = NULL;
2401 spin_unlock(&redirect_lock);
2402 if (f)
2403 fput(f);
2404 return 0;
2405 }
2406 if (file->f_op->write_iter != tty_write)
2407 return -ENOTTY;
2408 if (!(file->f_mode & FMODE_WRITE))
2409 return -EBADF;
2410 if (!(file->f_mode & FMODE_CAN_WRITE))
2411 return -EINVAL;
2412 spin_lock(&redirect_lock);
2413 if (redirect) {
2414 spin_unlock(&redirect_lock);
2415 return -EBUSY;
2416 }
2417 redirect = get_file(file);
2418 spin_unlock(&redirect_lock);
2419 return 0;
2420}
2421
2422/**
2423 * tiocsetd - set line discipline
2424 * @tty: tty device
2425 * @p: pointer to user data
2426 *
2427 * Set the line discipline according to user request.
2428 *
2429 * Locking: see tty_set_ldisc(), this function is just a helper
2430 */
2431static int tiocsetd(struct tty_struct *tty, int __user *p)
2432{
2433 int disc;
2434 int ret;
2435
2436 if (get_user(disc, p))
2437 return -EFAULT;
2438
2439 ret = tty_set_ldisc(tty, disc);
2440
2441 return ret;
2442}
2443
2444/**
2445 * tiocgetd - get line discipline
2446 * @tty: tty device
2447 * @p: pointer to user data
2448 *
2449 * Retrieves the line discipline id directly from the ldisc.
2450 *
2451 * Locking: waits for ldisc reference (in case the line discipline is changing
2452 * or the @tty is being hungup)
2453 */
2454static int tiocgetd(struct tty_struct *tty, int __user *p)
2455{
2456 struct tty_ldisc *ld;
2457 int ret;
2458
2459 ld = tty_ldisc_ref_wait(tty);
2460 if (!ld)
2461 return -EIO;
2462 ret = put_user(ld->ops->num, p);
2463 tty_ldisc_deref(ld);
2464 return ret;
2465}
2466
2467/**
2468 * send_break - performed time break
2469 * @tty: device to break on
2470 * @duration: timeout in mS
2471 *
2472 * Perform a timed break on hardware that lacks its own driver level timed
2473 * break functionality.
2474 *
2475 * Locking:
2476 * @tty->atomic_write_lock serializes
2477 */
2478static int send_break(struct tty_struct *tty, unsigned int duration)
2479{
2480 int retval;
2481
2482 if (tty->ops->break_ctl == NULL)
2483 return 0;
2484
2485 if (tty->driver->flags & TTY_DRIVER_HARDWARE_BREAK)
2486 return tty->ops->break_ctl(tty, duration);
2487
2488 /* Do the work ourselves */
2489 if (tty_write_lock(tty, false) < 0)
2490 return -EINTR;
2491
2492 retval = tty->ops->break_ctl(tty, -1);
2493 if (!retval) {
2494 msleep_interruptible(duration);
2495 retval = tty->ops->break_ctl(tty, 0);
2496 } else if (retval == -EOPNOTSUPP) {
2497 /* some drivers can tell only dynamically */
2498 retval = 0;
2499 }
2500 tty_write_unlock(tty);
2501
2502 if (signal_pending(current))
2503 retval = -EINTR;
2504
2505 return retval;
2506}
2507
2508/**
2509 * tty_get_tiocm - get tiocm status register
2510 * @tty: tty device
2511 *
2512 * Obtain the modem status bits from the tty driver if the feature
2513 * is supported.
2514 */
2515int tty_get_tiocm(struct tty_struct *tty)
2516{
2517 int retval = -ENOTTY;
2518
2519 if (tty->ops->tiocmget)
2520 retval = tty->ops->tiocmget(tty);
2521
2522 return retval;
2523}
2524EXPORT_SYMBOL_GPL(tty_get_tiocm);
2525
2526/**
2527 * tty_tiocmget - get modem status
2528 * @tty: tty device
2529 * @p: pointer to result
2530 *
2531 * Obtain the modem status bits from the tty driver if the feature is
2532 * supported. Return -%ENOTTY if it is not available.
2533 *
2534 * Locking: none (up to the driver)
2535 */
2536static int tty_tiocmget(struct tty_struct *tty, int __user *p)
2537{
2538 int retval;
2539
2540 retval = tty_get_tiocm(tty);
2541 if (retval >= 0)
2542 retval = put_user(retval, p);
2543
2544 return retval;
2545}
2546
2547/**
2548 * tty_tiocmset - set modem status
2549 * @tty: tty device
2550 * @cmd: command - clear bits, set bits or set all
2551 * @p: pointer to desired bits
2552 *
2553 * Set the modem status bits from the tty driver if the feature
2554 * is supported. Return -%ENOTTY if it is not available.
2555 *
2556 * Locking: none (up to the driver)
2557 */
2558static int tty_tiocmset(struct tty_struct *tty, unsigned int cmd,
2559 unsigned __user *p)
2560{
2561 int retval;
2562 unsigned int set, clear, val;
2563
2564 if (tty->ops->tiocmset == NULL)
2565 return -ENOTTY;
2566
2567 retval = get_user(val, p);
2568 if (retval)
2569 return retval;
2570 set = clear = 0;
2571 switch (cmd) {
2572 case TIOCMBIS:
2573 set = val;
2574 break;
2575 case TIOCMBIC:
2576 clear = val;
2577 break;
2578 case TIOCMSET:
2579 set = val;
2580 clear = ~val;
2581 break;
2582 }
2583 set &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
2584 clear &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
2585 return tty->ops->tiocmset(tty, set, clear);
2586}
2587
2588/**
2589 * tty_get_icount - get tty statistics
2590 * @tty: tty device
2591 * @icount: output parameter
2592 *
2593 * Gets a copy of the @tty's icount statistics.
2594 *
2595 * Locking: none (up to the driver)
2596 */
2597int tty_get_icount(struct tty_struct *tty,
2598 struct serial_icounter_struct *icount)
2599{
2600 memset(icount, 0, sizeof(*icount));
2601
2602 if (tty->ops->get_icount)
2603 return tty->ops->get_icount(tty, icount);
2604 else
2605 return -ENOTTY;
2606}
2607EXPORT_SYMBOL_GPL(tty_get_icount);
2608
2609static int tty_tiocgicount(struct tty_struct *tty, void __user *arg)
2610{
2611 struct serial_icounter_struct icount;
2612 int retval;
2613
2614 retval = tty_get_icount(tty, &icount);
2615 if (retval != 0)
2616 return retval;
2617
2618 if (copy_to_user(arg, &icount, sizeof(icount)))
2619 return -EFAULT;
2620 return 0;
2621}
2622
2623static int tty_set_serial(struct tty_struct *tty, struct serial_struct *ss)
2624{
2625 char comm[TASK_COMM_LEN];
2626 int flags;
2627
2628 flags = ss->flags & ASYNC_DEPRECATED;
2629
2630 if (flags)
2631 pr_warn_ratelimited("%s: '%s' is using deprecated serial flags (with no effect): %.8x\n",
2632 __func__, get_task_comm(comm, current), flags);
2633
2634 if (!tty->ops->set_serial)
2635 return -ENOTTY;
2636
2637 return tty->ops->set_serial(tty, ss);
2638}
2639
2640static int tty_tiocsserial(struct tty_struct *tty, struct serial_struct __user *ss)
2641{
2642 struct serial_struct v;
2643
2644 if (copy_from_user(&v, ss, sizeof(*ss)))
2645 return -EFAULT;
2646
2647 return tty_set_serial(tty, &v);
2648}
2649
2650static int tty_tiocgserial(struct tty_struct *tty, struct serial_struct __user *ss)
2651{
2652 struct serial_struct v;
2653 int err;
2654
2655 memset(&v, 0, sizeof(v));
2656 if (!tty->ops->get_serial)
2657 return -ENOTTY;
2658 err = tty->ops->get_serial(tty, &v);
2659 if (!err && copy_to_user(ss, &v, sizeof(v)))
2660 err = -EFAULT;
2661 return err;
2662}
2663
2664/*
2665 * if pty, return the slave side (real_tty)
2666 * otherwise, return self
2667 */
2668static struct tty_struct *tty_pair_get_tty(struct tty_struct *tty)
2669{
2670 if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
2671 tty->driver->subtype == PTY_TYPE_MASTER)
2672 tty = tty->link;
2673 return tty;
2674}
2675
2676/*
2677 * Split this up, as gcc can choke on it otherwise..
2678 */
2679long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
2680{
2681 struct tty_struct *tty = file_tty(file);
2682 struct tty_struct *real_tty;
2683 void __user *p = (void __user *)arg;
2684 int retval;
2685 struct tty_ldisc *ld;
2686
2687 if (tty_paranoia_check(tty, file_inode(file), "tty_ioctl"))
2688 return -EINVAL;
2689
2690 real_tty = tty_pair_get_tty(tty);
2691
2692 /*
2693 * Factor out some common prep work
2694 */
2695 switch (cmd) {
2696 case TIOCSETD:
2697 case TIOCSBRK:
2698 case TIOCCBRK:
2699 case TCSBRK:
2700 case TCSBRKP:
2701 retval = tty_check_change(tty);
2702 if (retval)
2703 return retval;
2704 if (cmd != TIOCCBRK) {
2705 tty_wait_until_sent(tty, 0);
2706 if (signal_pending(current))
2707 return -EINTR;
2708 }
2709 break;
2710 }
2711
2712 /*
2713 * Now do the stuff.
2714 */
2715 switch (cmd) {
2716 case TIOCSTI:
2717 return tiocsti(tty, p);
2718 case TIOCGWINSZ:
2719 return tiocgwinsz(real_tty, p);
2720 case TIOCSWINSZ:
2721 return tiocswinsz(real_tty, p);
2722 case TIOCCONS:
2723 return real_tty != tty ? -EINVAL : tioccons(file);
2724 case TIOCEXCL:
2725 set_bit(TTY_EXCLUSIVE, &tty->flags);
2726 return 0;
2727 case TIOCNXCL:
2728 clear_bit(TTY_EXCLUSIVE, &tty->flags);
2729 return 0;
2730 case TIOCGEXCL:
2731 {
2732 int excl = test_bit(TTY_EXCLUSIVE, &tty->flags);
2733
2734 return put_user(excl, (int __user *)p);
2735 }
2736 case TIOCGETD:
2737 return tiocgetd(tty, p);
2738 case TIOCSETD:
2739 return tiocsetd(tty, p);
2740 case TIOCVHANGUP:
2741 if (!capable(CAP_SYS_ADMIN))
2742 return -EPERM;
2743 tty_vhangup(tty);
2744 return 0;
2745 case TIOCGDEV:
2746 {
2747 unsigned int ret = new_encode_dev(tty_devnum(real_tty));
2748
2749 return put_user(ret, (unsigned int __user *)p);
2750 }
2751 /*
2752 * Break handling
2753 */
2754 case TIOCSBRK: /* Turn break on, unconditionally */
2755 if (tty->ops->break_ctl)
2756 return tty->ops->break_ctl(tty, -1);
2757 return 0;
2758 case TIOCCBRK: /* Turn break off, unconditionally */
2759 if (tty->ops->break_ctl)
2760 return tty->ops->break_ctl(tty, 0);
2761 return 0;
2762 case TCSBRK: /* SVID version: non-zero arg --> no break */
2763 /* non-zero arg means wait for all output data
2764 * to be sent (performed above) but don't send break.
2765 * This is used by the tcdrain() termios function.
2766 */
2767 if (!arg)
2768 return send_break(tty, 250);
2769 return 0;
2770 case TCSBRKP: /* support for POSIX tcsendbreak() */
2771 return send_break(tty, arg ? arg*100 : 250);
2772
2773 case TIOCMGET:
2774 return tty_tiocmget(tty, p);
2775 case TIOCMSET:
2776 case TIOCMBIC:
2777 case TIOCMBIS:
2778 return tty_tiocmset(tty, cmd, p);
2779 case TIOCGICOUNT:
2780 return tty_tiocgicount(tty, p);
2781 case TCFLSH:
2782 switch (arg) {
2783 case TCIFLUSH:
2784 case TCIOFLUSH:
2785 /* flush tty buffer and allow ldisc to process ioctl */
2786 tty_buffer_flush(tty, NULL);
2787 break;
2788 }
2789 break;
2790 case TIOCSSERIAL:
2791 return tty_tiocsserial(tty, p);
2792 case TIOCGSERIAL:
2793 return tty_tiocgserial(tty, p);
2794 case TIOCGPTPEER:
2795 /* Special because the struct file is needed */
2796 return ptm_open_peer(file, tty, (int)arg);
2797 default:
2798 retval = tty_jobctrl_ioctl(tty, real_tty, file, cmd, arg);
2799 if (retval != -ENOIOCTLCMD)
2800 return retval;
2801 }
2802 if (tty->ops->ioctl) {
2803 retval = tty->ops->ioctl(tty, cmd, arg);
2804 if (retval != -ENOIOCTLCMD)
2805 return retval;
2806 }
2807 ld = tty_ldisc_ref_wait(tty);
2808 if (!ld)
2809 return hung_up_tty_ioctl(file, cmd, arg);
2810 retval = -EINVAL;
2811 if (ld->ops->ioctl) {
2812 retval = ld->ops->ioctl(tty, cmd, arg);
2813 if (retval == -ENOIOCTLCMD)
2814 retval = -ENOTTY;
2815 }
2816 tty_ldisc_deref(ld);
2817 return retval;
2818}
2819
2820#ifdef CONFIG_COMPAT
2821
2822struct serial_struct32 {
2823 compat_int_t type;
2824 compat_int_t line;
2825 compat_uint_t port;
2826 compat_int_t irq;
2827 compat_int_t flags;
2828 compat_int_t xmit_fifo_size;
2829 compat_int_t custom_divisor;
2830 compat_int_t baud_base;
2831 unsigned short close_delay;
2832 char io_type;
2833 char reserved_char;
2834 compat_int_t hub6;
2835 unsigned short closing_wait; /* time to wait before closing */
2836 unsigned short closing_wait2; /* no longer used... */
2837 compat_uint_t iomem_base;
2838 unsigned short iomem_reg_shift;
2839 unsigned int port_high;
2840 /* compat_ulong_t iomap_base FIXME */
2841 compat_int_t reserved;
2842};
2843
2844static int compat_tty_tiocsserial(struct tty_struct *tty,
2845 struct serial_struct32 __user *ss)
2846{
2847 struct serial_struct32 v32;
2848 struct serial_struct v;
2849
2850 if (copy_from_user(&v32, ss, sizeof(*ss)))
2851 return -EFAULT;
2852
2853 memcpy(&v, &v32, offsetof(struct serial_struct32, iomem_base));
2854 v.iomem_base = compat_ptr(v32.iomem_base);
2855 v.iomem_reg_shift = v32.iomem_reg_shift;
2856 v.port_high = v32.port_high;
2857 v.iomap_base = 0;
2858
2859 return tty_set_serial(tty, &v);
2860}
2861
2862static int compat_tty_tiocgserial(struct tty_struct *tty,
2863 struct serial_struct32 __user *ss)
2864{
2865 struct serial_struct32 v32;
2866 struct serial_struct v;
2867 int err;
2868
2869 memset(&v, 0, sizeof(v));
2870 memset(&v32, 0, sizeof(v32));
2871
2872 if (!tty->ops->get_serial)
2873 return -ENOTTY;
2874 err = tty->ops->get_serial(tty, &v);
2875 if (!err) {
2876 memcpy(&v32, &v, offsetof(struct serial_struct32, iomem_base));
2877 v32.iomem_base = (unsigned long)v.iomem_base >> 32 ?
2878 0xfffffff : ptr_to_compat(v.iomem_base);
2879 v32.iomem_reg_shift = v.iomem_reg_shift;
2880 v32.port_high = v.port_high;
2881 if (copy_to_user(ss, &v32, sizeof(v32)))
2882 err = -EFAULT;
2883 }
2884 return err;
2885}
2886static long tty_compat_ioctl(struct file *file, unsigned int cmd,
2887 unsigned long arg)
2888{
2889 struct tty_struct *tty = file_tty(file);
2890 struct tty_ldisc *ld;
2891 int retval = -ENOIOCTLCMD;
2892
2893 switch (cmd) {
2894 case TIOCOUTQ:
2895 case TIOCSTI:
2896 case TIOCGWINSZ:
2897 case TIOCSWINSZ:
2898 case TIOCGEXCL:
2899 case TIOCGETD:
2900 case TIOCSETD:
2901 case TIOCGDEV:
2902 case TIOCMGET:
2903 case TIOCMSET:
2904 case TIOCMBIC:
2905 case TIOCMBIS:
2906 case TIOCGICOUNT:
2907 case TIOCGPGRP:
2908 case TIOCSPGRP:
2909 case TIOCGSID:
2910 case TIOCSERGETLSR:
2911 case TIOCGRS485:
2912 case TIOCSRS485:
2913#ifdef TIOCGETP
2914 case TIOCGETP:
2915 case TIOCSETP:
2916 case TIOCSETN:
2917#endif
2918#ifdef TIOCGETC
2919 case TIOCGETC:
2920 case TIOCSETC:
2921#endif
2922#ifdef TIOCGLTC
2923 case TIOCGLTC:
2924 case TIOCSLTC:
2925#endif
2926 case TCSETSF:
2927 case TCSETSW:
2928 case TCSETS:
2929 case TCGETS:
2930#ifdef TCGETS2
2931 case TCGETS2:
2932 case TCSETSF2:
2933 case TCSETSW2:
2934 case TCSETS2:
2935#endif
2936 case TCGETA:
2937 case TCSETAF:
2938 case TCSETAW:
2939 case TCSETA:
2940 case TIOCGLCKTRMIOS:
2941 case TIOCSLCKTRMIOS:
2942#ifdef TCGETX
2943 case TCGETX:
2944 case TCSETX:
2945 case TCSETXW:
2946 case TCSETXF:
2947#endif
2948 case TIOCGSOFTCAR:
2949 case TIOCSSOFTCAR:
2950
2951 case PPPIOCGCHAN:
2952 case PPPIOCGUNIT:
2953 return tty_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
2954 case TIOCCONS:
2955 case TIOCEXCL:
2956 case TIOCNXCL:
2957 case TIOCVHANGUP:
2958 case TIOCSBRK:
2959 case TIOCCBRK:
2960 case TCSBRK:
2961 case TCSBRKP:
2962 case TCFLSH:
2963 case TIOCGPTPEER:
2964 case TIOCNOTTY:
2965 case TIOCSCTTY:
2966 case TCXONC:
2967 case TIOCMIWAIT:
2968 case TIOCSERCONFIG:
2969 return tty_ioctl(file, cmd, arg);
2970 }
2971
2972 if (tty_paranoia_check(tty, file_inode(file), "tty_ioctl"))
2973 return -EINVAL;
2974
2975 switch (cmd) {
2976 case TIOCSSERIAL:
2977 return compat_tty_tiocsserial(tty, compat_ptr(arg));
2978 case TIOCGSERIAL:
2979 return compat_tty_tiocgserial(tty, compat_ptr(arg));
2980 }
2981 if (tty->ops->compat_ioctl) {
2982 retval = tty->ops->compat_ioctl(tty, cmd, arg);
2983 if (retval != -ENOIOCTLCMD)
2984 return retval;
2985 }
2986
2987 ld = tty_ldisc_ref_wait(tty);
2988 if (!ld)
2989 return hung_up_tty_compat_ioctl(file, cmd, arg);
2990 if (ld->ops->compat_ioctl)
2991 retval = ld->ops->compat_ioctl(tty, cmd, arg);
2992 if (retval == -ENOIOCTLCMD && ld->ops->ioctl)
2993 retval = ld->ops->ioctl(tty, (unsigned long)compat_ptr(cmd),
2994 arg);
2995 tty_ldisc_deref(ld);
2996
2997 return retval;
2998}
2999#endif
3000
3001static int this_tty(const void *t, struct file *file, unsigned fd)
3002{
3003 if (likely(file->f_op->read_iter != tty_read))
3004 return 0;
3005 return file_tty(file) != t ? 0 : fd + 1;
3006}
3007
3008/*
3009 * This implements the "Secure Attention Key" --- the idea is to
3010 * prevent trojan horses by killing all processes associated with this
3011 * tty when the user hits the "Secure Attention Key". Required for
3012 * super-paranoid applications --- see the Orange Book for more details.
3013 *
3014 * This code could be nicer; ideally it should send a HUP, wait a few
3015 * seconds, then send a INT, and then a KILL signal. But you then
3016 * have to coordinate with the init process, since all processes associated
3017 * with the current tty must be dead before the new getty is allowed
3018 * to spawn.
3019 *
3020 * Now, if it would be correct ;-/ The current code has a nasty hole -
3021 * it doesn't catch files in flight. We may send the descriptor to ourselves
3022 * via AF_UNIX socket, close it and later fetch from socket. FIXME.
3023 *
3024 * Nasty bug: do_SAK is being called in interrupt context. This can
3025 * deadlock. We punt it up to process context. AKPM - 16Mar2001
3026 */
3027void __do_SAK(struct tty_struct *tty)
3028{
3029 struct task_struct *g, *p;
3030 struct pid *session;
3031 int i;
3032 unsigned long flags;
3033
3034 spin_lock_irqsave(&tty->ctrl.lock, flags);
3035 session = get_pid(tty->ctrl.session);
3036 spin_unlock_irqrestore(&tty->ctrl.lock, flags);
3037
3038 tty_ldisc_flush(tty);
3039
3040 tty_driver_flush_buffer(tty);
3041
3042 read_lock(&tasklist_lock);
3043 /* Kill the entire session */
3044 do_each_pid_task(session, PIDTYPE_SID, p) {
3045 tty_notice(tty, "SAK: killed process %d (%s): by session\n",
3046 task_pid_nr(p), p->comm);
3047 group_send_sig_info(SIGKILL, SEND_SIG_PRIV, p, PIDTYPE_SID);
3048 } while_each_pid_task(session, PIDTYPE_SID, p);
3049
3050 /* Now kill any processes that happen to have the tty open */
3051 for_each_process_thread(g, p) {
3052 if (p->signal->tty == tty) {
3053 tty_notice(tty, "SAK: killed process %d (%s): by controlling tty\n",
3054 task_pid_nr(p), p->comm);
3055 group_send_sig_info(SIGKILL, SEND_SIG_PRIV, p,
3056 PIDTYPE_SID);
3057 continue;
3058 }
3059 task_lock(p);
3060 i = iterate_fd(p->files, 0, this_tty, tty);
3061 if (i != 0) {
3062 tty_notice(tty, "SAK: killed process %d (%s): by fd#%d\n",
3063 task_pid_nr(p), p->comm, i - 1);
3064 group_send_sig_info(SIGKILL, SEND_SIG_PRIV, p,
3065 PIDTYPE_SID);
3066 }
3067 task_unlock(p);
3068 }
3069 read_unlock(&tasklist_lock);
3070 put_pid(session);
3071}
3072
3073static void do_SAK_work(struct work_struct *work)
3074{
3075 struct tty_struct *tty =
3076 container_of(work, struct tty_struct, SAK_work);
3077 __do_SAK(tty);
3078}
3079
3080/*
3081 * The tq handling here is a little racy - tty->SAK_work may already be queued.
3082 * Fortunately we don't need to worry, because if ->SAK_work is already queued,
3083 * the values which we write to it will be identical to the values which it
3084 * already has. --akpm
3085 */
3086void do_SAK(struct tty_struct *tty)
3087{
3088 if (!tty)
3089 return;
3090 schedule_work(&tty->SAK_work);
3091}
3092EXPORT_SYMBOL(do_SAK);
3093
3094/* Must put_device() after it's unused! */
3095static struct device *tty_get_device(struct tty_struct *tty)
3096{
3097 dev_t devt = tty_devnum(tty);
3098
3099 return class_find_device_by_devt(&tty_class, devt);
3100}
3101
3102
3103/**
3104 * alloc_tty_struct - allocate a new tty
3105 * @driver: driver which will handle the returned tty
3106 * @idx: minor of the tty
3107 *
3108 * This subroutine allocates and initializes a tty structure.
3109 *
3110 * Locking: none - @tty in question is not exposed at this point
3111 */
3112struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx)
3113{
3114 struct tty_struct *tty;
3115
3116 tty = kzalloc(sizeof(*tty), GFP_KERNEL_ACCOUNT);
3117 if (!tty)
3118 return NULL;
3119
3120 kref_init(&tty->kref);
3121 if (tty_ldisc_init(tty)) {
3122 kfree(tty);
3123 return NULL;
3124 }
3125 tty->ctrl.session = NULL;
3126 tty->ctrl.pgrp = NULL;
3127 mutex_init(&tty->legacy_mutex);
3128 mutex_init(&tty->throttle_mutex);
3129 init_rwsem(&tty->termios_rwsem);
3130 mutex_init(&tty->winsize_mutex);
3131 init_ldsem(&tty->ldisc_sem);
3132 init_waitqueue_head(&tty->write_wait);
3133 init_waitqueue_head(&tty->read_wait);
3134 INIT_WORK(&tty->hangup_work, do_tty_hangup);
3135 mutex_init(&tty->atomic_write_lock);
3136 spin_lock_init(&tty->ctrl.lock);
3137 spin_lock_init(&tty->flow.lock);
3138 spin_lock_init(&tty->files_lock);
3139 INIT_LIST_HEAD(&tty->tty_files);
3140 INIT_WORK(&tty->SAK_work, do_SAK_work);
3141
3142 tty->driver = driver;
3143 tty->ops = driver->ops;
3144 tty->index = idx;
3145 tty_line_name(driver, idx, tty->name);
3146 tty->dev = tty_get_device(tty);
3147
3148 return tty;
3149}
3150
3151/**
3152 * tty_put_char - write one character to a tty
3153 * @tty: tty
3154 * @ch: character to write
3155 *
3156 * Write one byte to the @tty using the provided @tty->ops->put_char() method
3157 * if present.
3158 *
3159 * Note: the specific put_char operation in the driver layer may go
3160 * away soon. Don't call it directly, use this method
3161 *
3162 * Return: the number of characters successfully output.
3163 */
3164int tty_put_char(struct tty_struct *tty, u8 ch)
3165{
3166 if (tty->ops->put_char)
3167 return tty->ops->put_char(tty, ch);
3168 return tty->ops->write(tty, &ch, 1);
3169}
3170EXPORT_SYMBOL_GPL(tty_put_char);
3171
3172static int tty_cdev_add(struct tty_driver *driver, dev_t dev,
3173 unsigned int index, unsigned int count)
3174{
3175 int err;
3176
3177 /* init here, since reused cdevs cause crashes */
3178 driver->cdevs[index] = cdev_alloc();
3179 if (!driver->cdevs[index])
3180 return -ENOMEM;
3181 driver->cdevs[index]->ops = &tty_fops;
3182 driver->cdevs[index]->owner = driver->owner;
3183 err = cdev_add(driver->cdevs[index], dev, count);
3184 if (err)
3185 kobject_put(&driver->cdevs[index]->kobj);
3186 return err;
3187}
3188
3189/**
3190 * tty_register_device - register a tty device
3191 * @driver: the tty driver that describes the tty device
3192 * @index: the index in the tty driver for this tty device
3193 * @device: a struct device that is associated with this tty device.
3194 * This field is optional, if there is no known struct device
3195 * for this tty device it can be set to NULL safely.
3196 *
3197 * This call is required to be made to register an individual tty device
3198 * if the tty driver's flags have the %TTY_DRIVER_DYNAMIC_DEV bit set. If
3199 * that bit is not set, this function should not be called by a tty
3200 * driver.
3201 *
3202 * Locking: ??
3203 *
3204 * Return: A pointer to the struct device for this tty device (or
3205 * ERR_PTR(-EFOO) on error).
3206 */
3207struct device *tty_register_device(struct tty_driver *driver, unsigned index,
3208 struct device *device)
3209{
3210 return tty_register_device_attr(driver, index, device, NULL, NULL);
3211}
3212EXPORT_SYMBOL(tty_register_device);
3213
3214static void tty_device_create_release(struct device *dev)
3215{
3216 dev_dbg(dev, "releasing...\n");
3217 kfree(dev);
3218}
3219
3220/**
3221 * tty_register_device_attr - register a tty device
3222 * @driver: the tty driver that describes the tty device
3223 * @index: the index in the tty driver for this tty device
3224 * @device: a struct device that is associated with this tty device.
3225 * This field is optional, if there is no known struct device
3226 * for this tty device it can be set to %NULL safely.
3227 * @drvdata: Driver data to be set to device.
3228 * @attr_grp: Attribute group to be set on device.
3229 *
3230 * This call is required to be made to register an individual tty device if the
3231 * tty driver's flags have the %TTY_DRIVER_DYNAMIC_DEV bit set. If that bit is
3232 * not set, this function should not be called by a tty driver.
3233 *
3234 * Locking: ??
3235 *
3236 * Return: A pointer to the struct device for this tty device (or
3237 * ERR_PTR(-EFOO) on error).
3238 */
3239struct device *tty_register_device_attr(struct tty_driver *driver,
3240 unsigned index, struct device *device,
3241 void *drvdata,
3242 const struct attribute_group **attr_grp)
3243{
3244 char name[64];
3245 dev_t devt = MKDEV(driver->major, driver->minor_start) + index;
3246 struct ktermios *tp;
3247 struct device *dev;
3248 int retval;
3249
3250 if (index >= driver->num) {
3251 pr_err("%s: Attempt to register invalid tty line number (%d)\n",
3252 driver->name, index);
3253 return ERR_PTR(-EINVAL);
3254 }
3255
3256 if (driver->type == TTY_DRIVER_TYPE_PTY)
3257 pty_line_name(driver, index, name);
3258 else
3259 tty_line_name(driver, index, name);
3260
3261 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3262 if (!dev)
3263 return ERR_PTR(-ENOMEM);
3264
3265 dev->devt = devt;
3266 dev->class = &tty_class;
3267 dev->parent = device;
3268 dev->release = tty_device_create_release;
3269 dev_set_name(dev, "%s", name);
3270 dev->groups = attr_grp;
3271 dev_set_drvdata(dev, drvdata);
3272
3273 dev_set_uevent_suppress(dev, 1);
3274
3275 retval = device_register(dev);
3276 if (retval)
3277 goto err_put;
3278
3279 if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
3280 /*
3281 * Free any saved termios data so that the termios state is
3282 * reset when reusing a minor number.
3283 */
3284 tp = driver->termios[index];
3285 if (tp) {
3286 driver->termios[index] = NULL;
3287 kfree(tp);
3288 }
3289
3290 retval = tty_cdev_add(driver, devt, index, 1);
3291 if (retval)
3292 goto err_del;
3293 }
3294
3295 dev_set_uevent_suppress(dev, 0);
3296 kobject_uevent(&dev->kobj, KOBJ_ADD);
3297
3298 return dev;
3299
3300err_del:
3301 device_del(dev);
3302err_put:
3303 put_device(dev);
3304
3305 return ERR_PTR(retval);
3306}
3307EXPORT_SYMBOL_GPL(tty_register_device_attr);
3308
3309/**
3310 * tty_unregister_device - unregister a tty device
3311 * @driver: the tty driver that describes the tty device
3312 * @index: the index in the tty driver for this tty device
3313 *
3314 * If a tty device is registered with a call to tty_register_device() then
3315 * this function must be called when the tty device is gone.
3316 *
3317 * Locking: ??
3318 */
3319void tty_unregister_device(struct tty_driver *driver, unsigned index)
3320{
3321 device_destroy(&tty_class, MKDEV(driver->major, driver->minor_start) + index);
3322 if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
3323 cdev_del(driver->cdevs[index]);
3324 driver->cdevs[index] = NULL;
3325 }
3326}
3327EXPORT_SYMBOL(tty_unregister_device);
3328
3329/**
3330 * __tty_alloc_driver - allocate tty driver
3331 * @lines: count of lines this driver can handle at most
3332 * @owner: module which is responsible for this driver
3333 * @flags: some of %TTY_DRIVER_ flags, will be set in driver->flags
3334 *
3335 * This should not be called directly, some of the provided macros should be
3336 * used instead. Use IS_ERR() and friends on @retval.
3337 */
3338struct tty_driver *__tty_alloc_driver(unsigned int lines, struct module *owner,
3339 unsigned long flags)
3340{
3341 struct tty_driver *driver;
3342 unsigned int cdevs = 1;
3343 int err;
3344
3345 if (!lines || (flags & TTY_DRIVER_UNNUMBERED_NODE && lines > 1))
3346 return ERR_PTR(-EINVAL);
3347
3348 driver = kzalloc(sizeof(*driver), GFP_KERNEL);
3349 if (!driver)
3350 return ERR_PTR(-ENOMEM);
3351
3352 kref_init(&driver->kref);
3353 driver->num = lines;
3354 driver->owner = owner;
3355 driver->flags = flags;
3356
3357 if (!(flags & TTY_DRIVER_DEVPTS_MEM)) {
3358 driver->ttys = kcalloc(lines, sizeof(*driver->ttys),
3359 GFP_KERNEL);
3360 driver->termios = kcalloc(lines, sizeof(*driver->termios),
3361 GFP_KERNEL);
3362 if (!driver->ttys || !driver->termios) {
3363 err = -ENOMEM;
3364 goto err_free_all;
3365 }
3366 }
3367
3368 if (!(flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
3369 driver->ports = kcalloc(lines, sizeof(*driver->ports),
3370 GFP_KERNEL);
3371 if (!driver->ports) {
3372 err = -ENOMEM;
3373 goto err_free_all;
3374 }
3375 cdevs = lines;
3376 }
3377
3378 driver->cdevs = kcalloc(cdevs, sizeof(*driver->cdevs), GFP_KERNEL);
3379 if (!driver->cdevs) {
3380 err = -ENOMEM;
3381 goto err_free_all;
3382 }
3383
3384 return driver;
3385err_free_all:
3386 kfree(driver->ports);
3387 kfree(driver->ttys);
3388 kfree(driver->termios);
3389 kfree(driver->cdevs);
3390 kfree(driver);
3391 return ERR_PTR(err);
3392}
3393EXPORT_SYMBOL(__tty_alloc_driver);
3394
3395static void destruct_tty_driver(struct kref *kref)
3396{
3397 struct tty_driver *driver = container_of(kref, struct tty_driver, kref);
3398 int i;
3399 struct ktermios *tp;
3400
3401 if (driver->flags & TTY_DRIVER_INSTALLED) {
3402 for (i = 0; i < driver->num; i++) {
3403 tp = driver->termios[i];
3404 if (tp) {
3405 driver->termios[i] = NULL;
3406 kfree(tp);
3407 }
3408 if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV))
3409 tty_unregister_device(driver, i);
3410 }
3411 proc_tty_unregister_driver(driver);
3412 if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)
3413 cdev_del(driver->cdevs[0]);
3414 }
3415 kfree(driver->cdevs);
3416 kfree(driver->ports);
3417 kfree(driver->termios);
3418 kfree(driver->ttys);
3419 kfree(driver);
3420}
3421
3422/**
3423 * tty_driver_kref_put - drop a reference to a tty driver
3424 * @driver: driver of which to drop the reference
3425 *
3426 * The final put will destroy and free up the driver.
3427 */
3428void tty_driver_kref_put(struct tty_driver *driver)
3429{
3430 kref_put(&driver->kref, destruct_tty_driver);
3431}
3432EXPORT_SYMBOL(tty_driver_kref_put);
3433
3434/**
3435 * tty_register_driver - register a tty driver
3436 * @driver: driver to register
3437 *
3438 * Called by a tty driver to register itself.
3439 */
3440int tty_register_driver(struct tty_driver *driver)
3441{
3442 int error;
3443 int i;
3444 dev_t dev;
3445 struct device *d;
3446
3447 if (!driver->major) {
3448 error = alloc_chrdev_region(&dev, driver->minor_start,
3449 driver->num, driver->name);
3450 if (!error) {
3451 driver->major = MAJOR(dev);
3452 driver->minor_start = MINOR(dev);
3453 }
3454 } else {
3455 dev = MKDEV(driver->major, driver->minor_start);
3456 error = register_chrdev_region(dev, driver->num, driver->name);
3457 }
3458 if (error < 0)
3459 goto err;
3460
3461 if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC) {
3462 error = tty_cdev_add(driver, dev, 0, driver->num);
3463 if (error)
3464 goto err_unreg_char;
3465 }
3466
3467 mutex_lock(&tty_mutex);
3468 list_add(&driver->tty_drivers, &tty_drivers);
3469 mutex_unlock(&tty_mutex);
3470
3471 if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV)) {
3472 for (i = 0; i < driver->num; i++) {
3473 d = tty_register_device(driver, i, NULL);
3474 if (IS_ERR(d)) {
3475 error = PTR_ERR(d);
3476 goto err_unreg_devs;
3477 }
3478 }
3479 }
3480 proc_tty_register_driver(driver);
3481 driver->flags |= TTY_DRIVER_INSTALLED;
3482 return 0;
3483
3484err_unreg_devs:
3485 for (i--; i >= 0; i--)
3486 tty_unregister_device(driver, i);
3487
3488 mutex_lock(&tty_mutex);
3489 list_del(&driver->tty_drivers);
3490 mutex_unlock(&tty_mutex);
3491
3492err_unreg_char:
3493 unregister_chrdev_region(dev, driver->num);
3494err:
3495 return error;
3496}
3497EXPORT_SYMBOL(tty_register_driver);
3498
3499/**
3500 * tty_unregister_driver - unregister a tty driver
3501 * @driver: driver to unregister
3502 *
3503 * Called by a tty driver to unregister itself.
3504 */
3505void tty_unregister_driver(struct tty_driver *driver)
3506{
3507 unregister_chrdev_region(MKDEV(driver->major, driver->minor_start),
3508 driver->num);
3509 mutex_lock(&tty_mutex);
3510 list_del(&driver->tty_drivers);
3511 mutex_unlock(&tty_mutex);
3512}
3513EXPORT_SYMBOL(tty_unregister_driver);
3514
3515dev_t tty_devnum(struct tty_struct *tty)
3516{
3517 return MKDEV(tty->driver->major, tty->driver->minor_start) + tty->index;
3518}
3519EXPORT_SYMBOL(tty_devnum);
3520
3521void tty_default_fops(struct file_operations *fops)
3522{
3523 *fops = tty_fops;
3524}
3525
3526static char *tty_devnode(const struct device *dev, umode_t *mode)
3527{
3528 if (!mode)
3529 return NULL;
3530 if (dev->devt == MKDEV(TTYAUX_MAJOR, 0) ||
3531 dev->devt == MKDEV(TTYAUX_MAJOR, 2))
3532 *mode = 0666;
3533 return NULL;
3534}
3535
3536const struct class tty_class = {
3537 .name = "tty",
3538 .devnode = tty_devnode,
3539};
3540
3541static int __init tty_class_init(void)
3542{
3543 return class_register(&tty_class);
3544}
3545
3546postcore_initcall(tty_class_init);
3547
3548/* 3/2004 jmc: why do these devices exist? */
3549static struct cdev tty_cdev, console_cdev;
3550
3551static ssize_t show_cons_active(struct device *dev,
3552 struct device_attribute *attr, char *buf)
3553{
3554 struct console *cs[16];
3555 int i = 0;
3556 struct console *c;
3557 ssize_t count = 0;
3558
3559 /*
3560 * Hold the console_list_lock to guarantee that no consoles are
3561 * unregistered until all console processing is complete.
3562 * This also allows safe traversal of the console list and
3563 * race-free reading of @flags.
3564 */
3565 console_list_lock();
3566
3567 for_each_console(c) {
3568 if (!c->device)
3569 continue;
3570 if (!c->write)
3571 continue;
3572 if ((c->flags & CON_ENABLED) == 0)
3573 continue;
3574 cs[i++] = c;
3575 if (i >= ARRAY_SIZE(cs))
3576 break;
3577 }
3578
3579 /*
3580 * Take console_lock to serialize device() callback with
3581 * other console operations. For example, fg_console is
3582 * modified under console_lock when switching vt.
3583 */
3584 console_lock();
3585 while (i--) {
3586 int index = cs[i]->index;
3587 struct tty_driver *drv = cs[i]->device(cs[i], &index);
3588
3589 /* don't resolve tty0 as some programs depend on it */
3590 if (drv && (cs[i]->index > 0 || drv->major != TTY_MAJOR))
3591 count += tty_line_name(drv, index, buf + count);
3592 else
3593 count += sprintf(buf + count, "%s%d",
3594 cs[i]->name, cs[i]->index);
3595
3596 count += sprintf(buf + count, "%c", i ? ' ':'\n');
3597 }
3598 console_unlock();
3599
3600 console_list_unlock();
3601
3602 return count;
3603}
3604static DEVICE_ATTR(active, S_IRUGO, show_cons_active, NULL);
3605
3606static struct attribute *cons_dev_attrs[] = {
3607 &dev_attr_active.attr,
3608 NULL
3609};
3610
3611ATTRIBUTE_GROUPS(cons_dev);
3612
3613static struct device *consdev;
3614
3615void console_sysfs_notify(void)
3616{
3617 if (consdev)
3618 sysfs_notify(&consdev->kobj, NULL, "active");
3619}
3620
3621static struct ctl_table tty_table[] = {
3622 {
3623 .procname = "legacy_tiocsti",
3624 .data = &tty_legacy_tiocsti,
3625 .maxlen = sizeof(tty_legacy_tiocsti),
3626 .mode = 0644,
3627 .proc_handler = proc_dobool,
3628 },
3629 {
3630 .procname = "ldisc_autoload",
3631 .data = &tty_ldisc_autoload,
3632 .maxlen = sizeof(tty_ldisc_autoload),
3633 .mode = 0644,
3634 .proc_handler = proc_dointvec,
3635 .extra1 = SYSCTL_ZERO,
3636 .extra2 = SYSCTL_ONE,
3637 },
3638};
3639
3640/*
3641 * Ok, now we can initialize the rest of the tty devices and can count
3642 * on memory allocations, interrupts etc..
3643 */
3644int __init tty_init(void)
3645{
3646 register_sysctl_init("dev/tty", tty_table);
3647 cdev_init(&tty_cdev, &tty_fops);
3648 if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) ||
3649 register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
3650 panic("Couldn't register /dev/tty driver\n");
3651 device_create(&tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty");
3652
3653 cdev_init(&console_cdev, &console_fops);
3654 if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) ||
3655 register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0)
3656 panic("Couldn't register /dev/console driver\n");
3657 consdev = device_create_with_groups(&tty_class, NULL,
3658 MKDEV(TTYAUX_MAJOR, 1), NULL,
3659 cons_dev_groups, "console");
3660 if (IS_ERR(consdev))
3661 consdev = NULL;
3662
3663#ifdef CONFIG_VT
3664 vty_init(&console_fops);
3665#endif
3666 return 0;
3667}