Loading...
1/*
2 * Copyright (c) 2016 Intel Corporation
3 *
4 * Permission to use, copy, modify, distribute, and sell this software and its
5 * documentation for any purpose is hereby granted without fee, provided that
6 * the above copyright notice appear in all copies and that both that copyright
7 * notice and this permission notice appear in supporting documentation, and
8 * that the name of the copyright holders not be used in advertising or
9 * publicity pertaining to distribution of the software without specific,
10 * written prior permission. The copyright holders make no representations
11 * about the suitability of this software for any purpose. It is provided "as
12 * is" without express or implied warranty.
13 *
14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
20 * OF THIS SOFTWARE.
21 */
22
23#include <drm/drm_connector.h>
24#include <drm/drm_edid.h>
25#include <drm/drm_encoder.h>
26#include <drm/drm_utils.h>
27#include <drm/drm_print.h>
28#include <drm/drm_drv.h>
29#include <drm/drm_file.h>
30
31#include <linux/uaccess.h>
32
33#include "drm_crtc_internal.h"
34#include "drm_internal.h"
35
36/**
37 * DOC: overview
38 *
39 * In DRM connectors are the general abstraction for display sinks, and include
40 * als fixed panels or anything else that can display pixels in some form. As
41 * opposed to all other KMS objects representing hardware (like CRTC, encoder or
42 * plane abstractions) connectors can be hotplugged and unplugged at runtime.
43 * Hence they are reference-counted using drm_connector_get() and
44 * drm_connector_put().
45 *
46 * KMS driver must create, initialize, register and attach at a &struct
47 * drm_connector for each such sink. The instance is created as other KMS
48 * objects and initialized by setting the following fields. The connector is
49 * initialized with a call to drm_connector_init() with a pointer to the
50 * &struct drm_connector_funcs and a connector type, and then exposed to
51 * userspace with a call to drm_connector_register().
52 *
53 * Connectors must be attached to an encoder to be used. For devices that map
54 * connectors to encoders 1:1, the connector should be attached at
55 * initialization time with a call to drm_connector_attach_encoder(). The
56 * driver must also set the &drm_connector.encoder field to point to the
57 * attached encoder.
58 *
59 * For connectors which are not fixed (like built-in panels) the driver needs to
60 * support hotplug notifications. The simplest way to do that is by using the
61 * probe helpers, see drm_kms_helper_poll_init() for connectors which don't have
62 * hardware support for hotplug interrupts. Connectors with hardware hotplug
63 * support can instead use e.g. drm_helper_hpd_irq_event().
64 */
65
66struct drm_conn_prop_enum_list {
67 int type;
68 const char *name;
69 struct ida ida;
70};
71
72/*
73 * Connector and encoder types.
74 */
75static struct drm_conn_prop_enum_list drm_connector_enum_list[] = {
76 { DRM_MODE_CONNECTOR_Unknown, "Unknown" },
77 { DRM_MODE_CONNECTOR_VGA, "VGA" },
78 { DRM_MODE_CONNECTOR_DVII, "DVI-I" },
79 { DRM_MODE_CONNECTOR_DVID, "DVI-D" },
80 { DRM_MODE_CONNECTOR_DVIA, "DVI-A" },
81 { DRM_MODE_CONNECTOR_Composite, "Composite" },
82 { DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO" },
83 { DRM_MODE_CONNECTOR_LVDS, "LVDS" },
84 { DRM_MODE_CONNECTOR_Component, "Component" },
85 { DRM_MODE_CONNECTOR_9PinDIN, "DIN" },
86 { DRM_MODE_CONNECTOR_DisplayPort, "DP" },
87 { DRM_MODE_CONNECTOR_HDMIA, "HDMI-A" },
88 { DRM_MODE_CONNECTOR_HDMIB, "HDMI-B" },
89 { DRM_MODE_CONNECTOR_TV, "TV" },
90 { DRM_MODE_CONNECTOR_eDP, "eDP" },
91 { DRM_MODE_CONNECTOR_VIRTUAL, "Virtual" },
92 { DRM_MODE_CONNECTOR_DSI, "DSI" },
93 { DRM_MODE_CONNECTOR_DPI, "DPI" },
94 { DRM_MODE_CONNECTOR_WRITEBACK, "Writeback" },
95 { DRM_MODE_CONNECTOR_SPI, "SPI" },
96};
97
98void drm_connector_ida_init(void)
99{
100 int i;
101
102 for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
103 ida_init(&drm_connector_enum_list[i].ida);
104}
105
106void drm_connector_ida_destroy(void)
107{
108 int i;
109
110 for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
111 ida_destroy(&drm_connector_enum_list[i].ida);
112}
113
114/**
115 * drm_connector_get_cmdline_mode - reads the user's cmdline mode
116 * @connector: connector to quwery
117 *
118 * The kernel supports per-connector configuration of its consoles through
119 * use of the video= parameter. This function parses that option and
120 * extracts the user's specified mode (or enable/disable status) for a
121 * particular connector. This is typically only used during the early fbdev
122 * setup.
123 */
124static void drm_connector_get_cmdline_mode(struct drm_connector *connector)
125{
126 struct drm_cmdline_mode *mode = &connector->cmdline_mode;
127 char *option = NULL;
128
129 if (fb_get_options(connector->name, &option))
130 return;
131
132 if (!drm_mode_parse_command_line_for_connector(option,
133 connector,
134 mode))
135 return;
136
137 if (mode->force) {
138 DRM_INFO("forcing %s connector %s\n", connector->name,
139 drm_get_connector_force_name(mode->force));
140 connector->force = mode->force;
141 }
142
143 DRM_DEBUG_KMS("cmdline mode for connector %s %s %dx%d@%dHz%s%s%s\n",
144 connector->name, mode->name,
145 mode->xres, mode->yres,
146 mode->refresh_specified ? mode->refresh : 60,
147 mode->rb ? " reduced blanking" : "",
148 mode->margins ? " with margins" : "",
149 mode->interlace ? " interlaced" : "");
150}
151
152static void drm_connector_free(struct kref *kref)
153{
154 struct drm_connector *connector =
155 container_of(kref, struct drm_connector, base.refcount);
156 struct drm_device *dev = connector->dev;
157
158 drm_mode_object_unregister(dev, &connector->base);
159 connector->funcs->destroy(connector);
160}
161
162void drm_connector_free_work_fn(struct work_struct *work)
163{
164 struct drm_connector *connector, *n;
165 struct drm_device *dev =
166 container_of(work, struct drm_device, mode_config.connector_free_work);
167 struct drm_mode_config *config = &dev->mode_config;
168 unsigned long flags;
169 struct llist_node *freed;
170
171 spin_lock_irqsave(&config->connector_list_lock, flags);
172 freed = llist_del_all(&config->connector_free_list);
173 spin_unlock_irqrestore(&config->connector_list_lock, flags);
174
175 llist_for_each_entry_safe(connector, n, freed, free_node) {
176 drm_mode_object_unregister(dev, &connector->base);
177 connector->funcs->destroy(connector);
178 }
179}
180
181/**
182 * drm_connector_init - Init a preallocated connector
183 * @dev: DRM device
184 * @connector: the connector to init
185 * @funcs: callbacks for this connector
186 * @connector_type: user visible type of the connector
187 *
188 * Initialises a preallocated connector. Connectors should be
189 * subclassed as part of driver connector objects.
190 *
191 * Returns:
192 * Zero on success, error code on failure.
193 */
194int drm_connector_init(struct drm_device *dev,
195 struct drm_connector *connector,
196 const struct drm_connector_funcs *funcs,
197 int connector_type)
198{
199 struct drm_mode_config *config = &dev->mode_config;
200 int ret;
201 struct ida *connector_ida =
202 &drm_connector_enum_list[connector_type].ida;
203
204 WARN_ON(drm_drv_uses_atomic_modeset(dev) &&
205 (!funcs->atomic_destroy_state ||
206 !funcs->atomic_duplicate_state));
207
208 ret = __drm_mode_object_add(dev, &connector->base,
209 DRM_MODE_OBJECT_CONNECTOR,
210 false, drm_connector_free);
211 if (ret)
212 return ret;
213
214 connector->base.properties = &connector->properties;
215 connector->dev = dev;
216 connector->funcs = funcs;
217
218 /* connector index is used with 32bit bitmasks */
219 ret = ida_simple_get(&config->connector_ida, 0, 32, GFP_KERNEL);
220 if (ret < 0) {
221 DRM_DEBUG_KMS("Failed to allocate %s connector index: %d\n",
222 drm_connector_enum_list[connector_type].name,
223 ret);
224 goto out_put;
225 }
226 connector->index = ret;
227 ret = 0;
228
229 connector->connector_type = connector_type;
230 connector->connector_type_id =
231 ida_simple_get(connector_ida, 1, 0, GFP_KERNEL);
232 if (connector->connector_type_id < 0) {
233 ret = connector->connector_type_id;
234 goto out_put_id;
235 }
236 connector->name =
237 kasprintf(GFP_KERNEL, "%s-%d",
238 drm_connector_enum_list[connector_type].name,
239 connector->connector_type_id);
240 if (!connector->name) {
241 ret = -ENOMEM;
242 goto out_put_type_id;
243 }
244
245 INIT_LIST_HEAD(&connector->probed_modes);
246 INIT_LIST_HEAD(&connector->modes);
247 mutex_init(&connector->mutex);
248 connector->edid_blob_ptr = NULL;
249 connector->tile_blob_ptr = NULL;
250 connector->status = connector_status_unknown;
251 connector->display_info.panel_orientation =
252 DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
253
254 drm_connector_get_cmdline_mode(connector);
255
256 /* We should add connectors at the end to avoid upsetting the connector
257 * index too much. */
258 spin_lock_irq(&config->connector_list_lock);
259 list_add_tail(&connector->head, &config->connector_list);
260 config->num_connector++;
261 spin_unlock_irq(&config->connector_list_lock);
262
263 if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL &&
264 connector_type != DRM_MODE_CONNECTOR_WRITEBACK)
265 drm_connector_attach_edid_property(connector);
266
267 drm_object_attach_property(&connector->base,
268 config->dpms_property, 0);
269
270 drm_object_attach_property(&connector->base,
271 config->link_status_property,
272 0);
273
274 drm_object_attach_property(&connector->base,
275 config->non_desktop_property,
276 0);
277 drm_object_attach_property(&connector->base,
278 config->tile_property,
279 0);
280
281 if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
282 drm_object_attach_property(&connector->base, config->prop_crtc_id, 0);
283 }
284
285 connector->debugfs_entry = NULL;
286out_put_type_id:
287 if (ret)
288 ida_simple_remove(connector_ida, connector->connector_type_id);
289out_put_id:
290 if (ret)
291 ida_simple_remove(&config->connector_ida, connector->index);
292out_put:
293 if (ret)
294 drm_mode_object_unregister(dev, &connector->base);
295
296 return ret;
297}
298EXPORT_SYMBOL(drm_connector_init);
299
300/**
301 * drm_connector_init_with_ddc - Init a preallocated connector
302 * @dev: DRM device
303 * @connector: the connector to init
304 * @funcs: callbacks for this connector
305 * @connector_type: user visible type of the connector
306 * @ddc: pointer to the associated ddc adapter
307 *
308 * Initialises a preallocated connector. Connectors should be
309 * subclassed as part of driver connector objects.
310 *
311 * Ensures that the ddc field of the connector is correctly set.
312 *
313 * Returns:
314 * Zero on success, error code on failure.
315 */
316int drm_connector_init_with_ddc(struct drm_device *dev,
317 struct drm_connector *connector,
318 const struct drm_connector_funcs *funcs,
319 int connector_type,
320 struct i2c_adapter *ddc)
321{
322 int ret;
323
324 ret = drm_connector_init(dev, connector, funcs, connector_type);
325 if (ret)
326 return ret;
327
328 /* provide ddc symlink in sysfs */
329 connector->ddc = ddc;
330
331 return ret;
332}
333EXPORT_SYMBOL(drm_connector_init_with_ddc);
334
335/**
336 * drm_connector_attach_edid_property - attach edid property.
337 * @connector: the connector
338 *
339 * Some connector types like DRM_MODE_CONNECTOR_VIRTUAL do not get a
340 * edid property attached by default. This function can be used to
341 * explicitly enable the edid property in these cases.
342 */
343void drm_connector_attach_edid_property(struct drm_connector *connector)
344{
345 struct drm_mode_config *config = &connector->dev->mode_config;
346
347 drm_object_attach_property(&connector->base,
348 config->edid_property,
349 0);
350}
351EXPORT_SYMBOL(drm_connector_attach_edid_property);
352
353/**
354 * drm_connector_attach_encoder - attach a connector to an encoder
355 * @connector: connector to attach
356 * @encoder: encoder to attach @connector to
357 *
358 * This function links up a connector to an encoder. Note that the routing
359 * restrictions between encoders and crtcs are exposed to userspace through the
360 * possible_clones and possible_crtcs bitmasks.
361 *
362 * Returns:
363 * Zero on success, negative errno on failure.
364 */
365int drm_connector_attach_encoder(struct drm_connector *connector,
366 struct drm_encoder *encoder)
367{
368 int i;
369
370 /*
371 * In the past, drivers have attempted to model the static association
372 * of connector to encoder in simple connector/encoder devices using a
373 * direct assignment of connector->encoder = encoder. This connection
374 * is a logical one and the responsibility of the core, so drivers are
375 * expected not to mess with this.
376 *
377 * Note that the error return should've been enough here, but a large
378 * majority of drivers ignores the return value, so add in a big WARN
379 * to get people's attention.
380 */
381 if (WARN_ON(connector->encoder))
382 return -EINVAL;
383
384 for (i = 0; i < ARRAY_SIZE(connector->encoder_ids); i++) {
385 if (connector->encoder_ids[i] == 0) {
386 connector->encoder_ids[i] = encoder->base.id;
387 return 0;
388 }
389 }
390 return -ENOMEM;
391}
392EXPORT_SYMBOL(drm_connector_attach_encoder);
393
394/**
395 * drm_connector_has_possible_encoder - check if the connector and encoder are assosicated with each other
396 * @connector: the connector
397 * @encoder: the encoder
398 *
399 * Returns:
400 * True if @encoder is one of the possible encoders for @connector.
401 */
402bool drm_connector_has_possible_encoder(struct drm_connector *connector,
403 struct drm_encoder *encoder)
404{
405 struct drm_encoder *enc;
406 int i;
407
408 drm_connector_for_each_possible_encoder(connector, enc, i) {
409 if (enc == encoder)
410 return true;
411 }
412
413 return false;
414}
415EXPORT_SYMBOL(drm_connector_has_possible_encoder);
416
417static void drm_mode_remove(struct drm_connector *connector,
418 struct drm_display_mode *mode)
419{
420 list_del(&mode->head);
421 drm_mode_destroy(connector->dev, mode);
422}
423
424/**
425 * drm_connector_cleanup - cleans up an initialised connector
426 * @connector: connector to cleanup
427 *
428 * Cleans up the connector but doesn't free the object.
429 */
430void drm_connector_cleanup(struct drm_connector *connector)
431{
432 struct drm_device *dev = connector->dev;
433 struct drm_display_mode *mode, *t;
434
435 /* The connector should have been removed from userspace long before
436 * it is finally destroyed.
437 */
438 if (WARN_ON(connector->registration_state ==
439 DRM_CONNECTOR_REGISTERED))
440 drm_connector_unregister(connector);
441
442 if (connector->tile_group) {
443 drm_mode_put_tile_group(dev, connector->tile_group);
444 connector->tile_group = NULL;
445 }
446
447 list_for_each_entry_safe(mode, t, &connector->probed_modes, head)
448 drm_mode_remove(connector, mode);
449
450 list_for_each_entry_safe(mode, t, &connector->modes, head)
451 drm_mode_remove(connector, mode);
452
453 ida_simple_remove(&drm_connector_enum_list[connector->connector_type].ida,
454 connector->connector_type_id);
455
456 ida_simple_remove(&dev->mode_config.connector_ida,
457 connector->index);
458
459 kfree(connector->display_info.bus_formats);
460 drm_mode_object_unregister(dev, &connector->base);
461 kfree(connector->name);
462 connector->name = NULL;
463 spin_lock_irq(&dev->mode_config.connector_list_lock);
464 list_del(&connector->head);
465 dev->mode_config.num_connector--;
466 spin_unlock_irq(&dev->mode_config.connector_list_lock);
467
468 WARN_ON(connector->state && !connector->funcs->atomic_destroy_state);
469 if (connector->state && connector->funcs->atomic_destroy_state)
470 connector->funcs->atomic_destroy_state(connector,
471 connector->state);
472
473 mutex_destroy(&connector->mutex);
474
475 memset(connector, 0, sizeof(*connector));
476}
477EXPORT_SYMBOL(drm_connector_cleanup);
478
479/**
480 * drm_connector_register - register a connector
481 * @connector: the connector to register
482 *
483 * Register userspace interfaces for a connector
484 *
485 * Returns:
486 * Zero on success, error code on failure.
487 */
488int drm_connector_register(struct drm_connector *connector)
489{
490 int ret = 0;
491
492 if (!connector->dev->registered)
493 return 0;
494
495 mutex_lock(&connector->mutex);
496 if (connector->registration_state != DRM_CONNECTOR_INITIALIZING)
497 goto unlock;
498
499 ret = drm_sysfs_connector_add(connector);
500 if (ret)
501 goto unlock;
502
503 drm_debugfs_connector_add(connector);
504
505 if (connector->funcs->late_register) {
506 ret = connector->funcs->late_register(connector);
507 if (ret)
508 goto err_debugfs;
509 }
510
511 drm_mode_object_register(connector->dev, &connector->base);
512
513 connector->registration_state = DRM_CONNECTOR_REGISTERED;
514 goto unlock;
515
516err_debugfs:
517 drm_debugfs_connector_remove(connector);
518 drm_sysfs_connector_remove(connector);
519unlock:
520 mutex_unlock(&connector->mutex);
521 return ret;
522}
523EXPORT_SYMBOL(drm_connector_register);
524
525/**
526 * drm_connector_unregister - unregister a connector
527 * @connector: the connector to unregister
528 *
529 * Unregister userspace interfaces for a connector
530 */
531void drm_connector_unregister(struct drm_connector *connector)
532{
533 mutex_lock(&connector->mutex);
534 if (connector->registration_state != DRM_CONNECTOR_REGISTERED) {
535 mutex_unlock(&connector->mutex);
536 return;
537 }
538
539 if (connector->funcs->early_unregister)
540 connector->funcs->early_unregister(connector);
541
542 drm_sysfs_connector_remove(connector);
543 drm_debugfs_connector_remove(connector);
544
545 connector->registration_state = DRM_CONNECTOR_UNREGISTERED;
546 mutex_unlock(&connector->mutex);
547}
548EXPORT_SYMBOL(drm_connector_unregister);
549
550void drm_connector_unregister_all(struct drm_device *dev)
551{
552 struct drm_connector *connector;
553 struct drm_connector_list_iter conn_iter;
554
555 drm_connector_list_iter_begin(dev, &conn_iter);
556 drm_for_each_connector_iter(connector, &conn_iter)
557 drm_connector_unregister(connector);
558 drm_connector_list_iter_end(&conn_iter);
559}
560
561int drm_connector_register_all(struct drm_device *dev)
562{
563 struct drm_connector *connector;
564 struct drm_connector_list_iter conn_iter;
565 int ret = 0;
566
567 drm_connector_list_iter_begin(dev, &conn_iter);
568 drm_for_each_connector_iter(connector, &conn_iter) {
569 ret = drm_connector_register(connector);
570 if (ret)
571 break;
572 }
573 drm_connector_list_iter_end(&conn_iter);
574
575 if (ret)
576 drm_connector_unregister_all(dev);
577 return ret;
578}
579
580/**
581 * drm_get_connector_status_name - return a string for connector status
582 * @status: connector status to compute name of
583 *
584 * In contrast to the other drm_get_*_name functions this one here returns a
585 * const pointer and hence is threadsafe.
586 */
587const char *drm_get_connector_status_name(enum drm_connector_status status)
588{
589 if (status == connector_status_connected)
590 return "connected";
591 else if (status == connector_status_disconnected)
592 return "disconnected";
593 else
594 return "unknown";
595}
596EXPORT_SYMBOL(drm_get_connector_status_name);
597
598/**
599 * drm_get_connector_force_name - return a string for connector force
600 * @force: connector force to get name of
601 *
602 * Returns: const pointer to name.
603 */
604const char *drm_get_connector_force_name(enum drm_connector_force force)
605{
606 switch (force) {
607 case DRM_FORCE_UNSPECIFIED:
608 return "unspecified";
609 case DRM_FORCE_OFF:
610 return "off";
611 case DRM_FORCE_ON:
612 return "on";
613 case DRM_FORCE_ON_DIGITAL:
614 return "digital";
615 default:
616 return "unknown";
617 }
618}
619
620#ifdef CONFIG_LOCKDEP
621static struct lockdep_map connector_list_iter_dep_map = {
622 .name = "drm_connector_list_iter"
623};
624#endif
625
626/**
627 * drm_connector_list_iter_begin - initialize a connector_list iterator
628 * @dev: DRM device
629 * @iter: connector_list iterator
630 *
631 * Sets @iter up to walk the &drm_mode_config.connector_list of @dev. @iter
632 * must always be cleaned up again by calling drm_connector_list_iter_end().
633 * Iteration itself happens using drm_connector_list_iter_next() or
634 * drm_for_each_connector_iter().
635 */
636void drm_connector_list_iter_begin(struct drm_device *dev,
637 struct drm_connector_list_iter *iter)
638{
639 iter->dev = dev;
640 iter->conn = NULL;
641 lock_acquire_shared_recursive(&connector_list_iter_dep_map, 0, 1, NULL, _RET_IP_);
642}
643EXPORT_SYMBOL(drm_connector_list_iter_begin);
644
645/*
646 * Extra-safe connector put function that works in any context. Should only be
647 * used from the connector_iter functions, where we never really expect to
648 * actually release the connector when dropping our final reference.
649 */
650static void
651__drm_connector_put_safe(struct drm_connector *conn)
652{
653 struct drm_mode_config *config = &conn->dev->mode_config;
654
655 lockdep_assert_held(&config->connector_list_lock);
656
657 if (!refcount_dec_and_test(&conn->base.refcount.refcount))
658 return;
659
660 llist_add(&conn->free_node, &config->connector_free_list);
661 schedule_work(&config->connector_free_work);
662}
663
664/**
665 * drm_connector_list_iter_next - return next connector
666 * @iter: connector_list iterator
667 *
668 * Returns the next connector for @iter, or NULL when the list walk has
669 * completed.
670 */
671struct drm_connector *
672drm_connector_list_iter_next(struct drm_connector_list_iter *iter)
673{
674 struct drm_connector *old_conn = iter->conn;
675 struct drm_mode_config *config = &iter->dev->mode_config;
676 struct list_head *lhead;
677 unsigned long flags;
678
679 spin_lock_irqsave(&config->connector_list_lock, flags);
680 lhead = old_conn ? &old_conn->head : &config->connector_list;
681
682 do {
683 if (lhead->next == &config->connector_list) {
684 iter->conn = NULL;
685 break;
686 }
687
688 lhead = lhead->next;
689 iter->conn = list_entry(lhead, struct drm_connector, head);
690
691 /* loop until it's not a zombie connector */
692 } while (!kref_get_unless_zero(&iter->conn->base.refcount));
693
694 if (old_conn)
695 __drm_connector_put_safe(old_conn);
696 spin_unlock_irqrestore(&config->connector_list_lock, flags);
697
698 return iter->conn;
699}
700EXPORT_SYMBOL(drm_connector_list_iter_next);
701
702/**
703 * drm_connector_list_iter_end - tear down a connector_list iterator
704 * @iter: connector_list iterator
705 *
706 * Tears down @iter and releases any resources (like &drm_connector references)
707 * acquired while walking the list. This must always be called, both when the
708 * iteration completes fully or when it was aborted without walking the entire
709 * list.
710 */
711void drm_connector_list_iter_end(struct drm_connector_list_iter *iter)
712{
713 struct drm_mode_config *config = &iter->dev->mode_config;
714 unsigned long flags;
715
716 iter->dev = NULL;
717 if (iter->conn) {
718 spin_lock_irqsave(&config->connector_list_lock, flags);
719 __drm_connector_put_safe(iter->conn);
720 spin_unlock_irqrestore(&config->connector_list_lock, flags);
721 }
722 lock_release(&connector_list_iter_dep_map, 0, _RET_IP_);
723}
724EXPORT_SYMBOL(drm_connector_list_iter_end);
725
726static const struct drm_prop_enum_list drm_subpixel_enum_list[] = {
727 { SubPixelUnknown, "Unknown" },
728 { SubPixelHorizontalRGB, "Horizontal RGB" },
729 { SubPixelHorizontalBGR, "Horizontal BGR" },
730 { SubPixelVerticalRGB, "Vertical RGB" },
731 { SubPixelVerticalBGR, "Vertical BGR" },
732 { SubPixelNone, "None" },
733};
734
735/**
736 * drm_get_subpixel_order_name - return a string for a given subpixel enum
737 * @order: enum of subpixel_order
738 *
739 * Note you could abuse this and return something out of bounds, but that
740 * would be a caller error. No unscrubbed user data should make it here.
741 */
742const char *drm_get_subpixel_order_name(enum subpixel_order order)
743{
744 return drm_subpixel_enum_list[order].name;
745}
746EXPORT_SYMBOL(drm_get_subpixel_order_name);
747
748static const struct drm_prop_enum_list drm_dpms_enum_list[] = {
749 { DRM_MODE_DPMS_ON, "On" },
750 { DRM_MODE_DPMS_STANDBY, "Standby" },
751 { DRM_MODE_DPMS_SUSPEND, "Suspend" },
752 { DRM_MODE_DPMS_OFF, "Off" }
753};
754DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list)
755
756static const struct drm_prop_enum_list drm_link_status_enum_list[] = {
757 { DRM_MODE_LINK_STATUS_GOOD, "Good" },
758 { DRM_MODE_LINK_STATUS_BAD, "Bad" },
759};
760
761/**
762 * drm_display_info_set_bus_formats - set the supported bus formats
763 * @info: display info to store bus formats in
764 * @formats: array containing the supported bus formats
765 * @num_formats: the number of entries in the fmts array
766 *
767 * Store the supported bus formats in display info structure.
768 * See MEDIA_BUS_FMT_* definitions in include/uapi/linux/media-bus-format.h for
769 * a full list of available formats.
770 */
771int drm_display_info_set_bus_formats(struct drm_display_info *info,
772 const u32 *formats,
773 unsigned int num_formats)
774{
775 u32 *fmts = NULL;
776
777 if (!formats && num_formats)
778 return -EINVAL;
779
780 if (formats && num_formats) {
781 fmts = kmemdup(formats, sizeof(*formats) * num_formats,
782 GFP_KERNEL);
783 if (!fmts)
784 return -ENOMEM;
785 }
786
787 kfree(info->bus_formats);
788 info->bus_formats = fmts;
789 info->num_bus_formats = num_formats;
790
791 return 0;
792}
793EXPORT_SYMBOL(drm_display_info_set_bus_formats);
794
795/* Optional connector properties. */
796static const struct drm_prop_enum_list drm_scaling_mode_enum_list[] = {
797 { DRM_MODE_SCALE_NONE, "None" },
798 { DRM_MODE_SCALE_FULLSCREEN, "Full" },
799 { DRM_MODE_SCALE_CENTER, "Center" },
800 { DRM_MODE_SCALE_ASPECT, "Full aspect" },
801};
802
803static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
804 { DRM_MODE_PICTURE_ASPECT_NONE, "Automatic" },
805 { DRM_MODE_PICTURE_ASPECT_4_3, "4:3" },
806 { DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
807};
808
809static const struct drm_prop_enum_list drm_content_type_enum_list[] = {
810 { DRM_MODE_CONTENT_TYPE_NO_DATA, "No Data" },
811 { DRM_MODE_CONTENT_TYPE_GRAPHICS, "Graphics" },
812 { DRM_MODE_CONTENT_TYPE_PHOTO, "Photo" },
813 { DRM_MODE_CONTENT_TYPE_CINEMA, "Cinema" },
814 { DRM_MODE_CONTENT_TYPE_GAME, "Game" },
815};
816
817static const struct drm_prop_enum_list drm_panel_orientation_enum_list[] = {
818 { DRM_MODE_PANEL_ORIENTATION_NORMAL, "Normal" },
819 { DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, "Upside Down" },
820 { DRM_MODE_PANEL_ORIENTATION_LEFT_UP, "Left Side Up" },
821 { DRM_MODE_PANEL_ORIENTATION_RIGHT_UP, "Right Side Up" },
822};
823
824static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
825 { DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
826 { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */
827 { DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */
828};
829DRM_ENUM_NAME_FN(drm_get_dvi_i_select_name, drm_dvi_i_select_enum_list)
830
831static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = {
832 { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I and TV-out */
833 { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */
834 { DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */
835};
836DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
837 drm_dvi_i_subconnector_enum_list)
838
839static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
840 { DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
841 { DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
842 { DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */
843 { DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
844 { DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */
845};
846DRM_ENUM_NAME_FN(drm_get_tv_select_name, drm_tv_select_enum_list)
847
848static const struct drm_prop_enum_list drm_tv_subconnector_enum_list[] = {
849 { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I and TV-out */
850 { DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
851 { DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */
852 { DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
853 { DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */
854};
855DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
856 drm_tv_subconnector_enum_list)
857
858static const struct drm_prop_enum_list hdmi_colorspaces[] = {
859 /* For Default case, driver will set the colorspace */
860 { DRM_MODE_COLORIMETRY_DEFAULT, "Default" },
861 /* Standard Definition Colorimetry based on CEA 861 */
862 { DRM_MODE_COLORIMETRY_SMPTE_170M_YCC, "SMPTE_170M_YCC" },
863 { DRM_MODE_COLORIMETRY_BT709_YCC, "BT709_YCC" },
864 /* Standard Definition Colorimetry based on IEC 61966-2-4 */
865 { DRM_MODE_COLORIMETRY_XVYCC_601, "XVYCC_601" },
866 /* High Definition Colorimetry based on IEC 61966-2-4 */
867 { DRM_MODE_COLORIMETRY_XVYCC_709, "XVYCC_709" },
868 /* Colorimetry based on IEC 61966-2-1/Amendment 1 */
869 { DRM_MODE_COLORIMETRY_SYCC_601, "SYCC_601" },
870 /* Colorimetry based on IEC 61966-2-5 [33] */
871 { DRM_MODE_COLORIMETRY_OPYCC_601, "opYCC_601" },
872 /* Colorimetry based on IEC 61966-2-5 */
873 { DRM_MODE_COLORIMETRY_OPRGB, "opRGB" },
874 /* Colorimetry based on ITU-R BT.2020 */
875 { DRM_MODE_COLORIMETRY_BT2020_CYCC, "BT2020_CYCC" },
876 /* Colorimetry based on ITU-R BT.2020 */
877 { DRM_MODE_COLORIMETRY_BT2020_RGB, "BT2020_RGB" },
878 /* Colorimetry based on ITU-R BT.2020 */
879 { DRM_MODE_COLORIMETRY_BT2020_YCC, "BT2020_YCC" },
880 /* Added as part of Additional Colorimetry Extension in 861.G */
881 { DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65, "DCI-P3_RGB_D65" },
882 { DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER, "DCI-P3_RGB_Theater" },
883};
884
885/**
886 * DOC: standard connector properties
887 *
888 * DRM connectors have a few standardized properties:
889 *
890 * EDID:
891 * Blob property which contains the current EDID read from the sink. This
892 * is useful to parse sink identification information like vendor, model
893 * and serial. Drivers should update this property by calling
894 * drm_connector_update_edid_property(), usually after having parsed
895 * the EDID using drm_add_edid_modes(). Userspace cannot change this
896 * property.
897 * DPMS:
898 * Legacy property for setting the power state of the connector. For atomic
899 * drivers this is only provided for backwards compatibility with existing
900 * drivers, it remaps to controlling the "ACTIVE" property on the CRTC the
901 * connector is linked to. Drivers should never set this property directly,
902 * it is handled by the DRM core by calling the &drm_connector_funcs.dpms
903 * callback. For atomic drivers the remapping to the "ACTIVE" property is
904 * implemented in the DRM core. This is the only standard connector
905 * property that userspace can change.
906 *
907 * Note that this property cannot be set through the MODE_ATOMIC ioctl,
908 * userspace must use "ACTIVE" on the CRTC instead.
909 *
910 * WARNING:
911 *
912 * For userspace also running on legacy drivers the "DPMS" semantics are a
913 * lot more complicated. First, userspace cannot rely on the "DPMS" value
914 * returned by the GETCONNECTOR actually reflecting reality, because many
915 * drivers fail to update it. For atomic drivers this is taken care of in
916 * drm_atomic_helper_update_legacy_modeset_state().
917 *
918 * The second issue is that the DPMS state is only well-defined when the
919 * connector is connected to a CRTC. In atomic the DRM core enforces that
920 * "ACTIVE" is off in such a case, no such checks exists for "DPMS".
921 *
922 * Finally, when enabling an output using the legacy SETCONFIG ioctl then
923 * "DPMS" is forced to ON. But see above, that might not be reflected in
924 * the software value on legacy drivers.
925 *
926 * Summarizing: Only set "DPMS" when the connector is known to be enabled,
927 * assume that a successful SETCONFIG call also sets "DPMS" to on, and
928 * never read back the value of "DPMS" because it can be incorrect.
929 * PATH:
930 * Connector path property to identify how this sink is physically
931 * connected. Used by DP MST. This should be set by calling
932 * drm_connector_set_path_property(), in the case of DP MST with the
933 * path property the MST manager created. Userspace cannot change this
934 * property.
935 * TILE:
936 * Connector tile group property to indicate how a set of DRM connector
937 * compose together into one logical screen. This is used by both high-res
938 * external screens (often only using a single cable, but exposing multiple
939 * DP MST sinks), or high-res integrated panels (like dual-link DSI) which
940 * are not gen-locked. Note that for tiled panels which are genlocked, like
941 * dual-link LVDS or dual-link DSI, the driver should try to not expose the
942 * tiling and virtualize both &drm_crtc and &drm_plane if needed. Drivers
943 * should update this value using drm_connector_set_tile_property().
944 * Userspace cannot change this property.
945 * link-status:
946 * Connector link-status property to indicate the status of link. The
947 * default value of link-status is "GOOD". If something fails during or
948 * after modeset, the kernel driver may set this to "BAD" and issue a
949 * hotplug uevent. Drivers should update this value using
950 * drm_connector_set_link_status_property().
951 * non_desktop:
952 * Indicates the output should be ignored for purposes of displaying a
953 * standard desktop environment or console. This is most likely because
954 * the output device is not rectilinear.
955 * Content Protection:
956 * This property is used by userspace to request the kernel protect future
957 * content communicated over the link. When requested, kernel will apply
958 * the appropriate means of protection (most often HDCP), and use the
959 * property to tell userspace the protection is active.
960 *
961 * Drivers can set this up by calling
962 * drm_connector_attach_content_protection_property() on initialization.
963 *
964 * The value of this property can be one of the following:
965 *
966 * DRM_MODE_CONTENT_PROTECTION_UNDESIRED = 0
967 * The link is not protected, content is transmitted in the clear.
968 * DRM_MODE_CONTENT_PROTECTION_DESIRED = 1
969 * Userspace has requested content protection, but the link is not
970 * currently protected. When in this state, kernel should enable
971 * Content Protection as soon as possible.
972 * DRM_MODE_CONTENT_PROTECTION_ENABLED = 2
973 * Userspace has requested content protection, and the link is
974 * protected. Only the driver can set the property to this value.
975 * If userspace attempts to set to ENABLED, kernel will return
976 * -EINVAL.
977 *
978 * A few guidelines:
979 *
980 * - DESIRED state should be preserved until userspace de-asserts it by
981 * setting the property to UNDESIRED. This means ENABLED should only
982 * transition to UNDESIRED when the user explicitly requests it.
983 * - If the state is DESIRED, kernel should attempt to re-authenticate the
984 * link whenever possible. This includes across disable/enable, dpms,
985 * hotplug, downstream device changes, link status failures, etc..
986 * - Kernel sends uevent with the connector id and property id through
987 * @drm_hdcp_update_content_protection, upon below kernel triggered
988 * scenarios:
989 *
990 * - DESIRED -> ENABLED (authentication success)
991 * - ENABLED -> DESIRED (termination of authentication)
992 * - Please note no uevents for userspace triggered property state changes,
993 * which can't fail such as
994 *
995 * - DESIRED/ENABLED -> UNDESIRED
996 * - UNDESIRED -> DESIRED
997 * - Userspace is responsible for polling the property or listen to uevents
998 * to determine when the value transitions from ENABLED to DESIRED.
999 * This signifies the link is no longer protected and userspace should
1000 * take appropriate action (whatever that might be).
1001 *
1002 * HDCP Content Type:
1003 * This Enum property is used by the userspace to declare the content type
1004 * of the display stream, to kernel. Here display stream stands for any
1005 * display content that userspace intended to display through HDCP
1006 * encryption.
1007 *
1008 * Content Type of a stream is decided by the owner of the stream, as
1009 * "HDCP Type0" or "HDCP Type1".
1010 *
1011 * The value of the property can be one of the below:
1012 * - "HDCP Type0": DRM_MODE_HDCP_CONTENT_TYPE0 = 0
1013 * - "HDCP Type1": DRM_MODE_HDCP_CONTENT_TYPE1 = 1
1014 *
1015 * When kernel starts the HDCP authentication (see "Content Protection"
1016 * for details), it uses the content type in "HDCP Content Type"
1017 * for performing the HDCP authentication with the display sink.
1018 *
1019 * Please note in HDCP spec versions, a link can be authenticated with
1020 * HDCP 2.2 for Content Type 0/Content Type 1. Where as a link can be
1021 * authenticated with HDCP1.4 only for Content Type 0(though it is implicit
1022 * in nature. As there is no reference for Content Type in HDCP1.4).
1023 *
1024 * HDCP2.2 authentication protocol itself takes the "Content Type" as a
1025 * parameter, which is a input for the DP HDCP2.2 encryption algo.
1026 *
1027 * In case of Type 0 content protection request, kernel driver can choose
1028 * either of HDCP spec versions 1.4 and 2.2. When HDCP2.2 is used for
1029 * "HDCP Type 0", a HDCP 2.2 capable repeater in the downstream can send
1030 * that content to a HDCP 1.4 authenticated HDCP sink (Type0 link).
1031 * But if the content is classified as "HDCP Type 1", above mentioned
1032 * HDCP 2.2 repeater wont send the content to the HDCP sink as it can't
1033 * authenticate the HDCP1.4 capable sink for "HDCP Type 1".
1034 *
1035 * Please note userspace can be ignorant of the HDCP versions used by the
1036 * kernel driver to achieve the "HDCP Content Type".
1037 *
1038 * At current scenario, classifying a content as Type 1 ensures that the
1039 * content will be displayed only through the HDCP2.2 encrypted link.
1040 *
1041 * Note that the HDCP Content Type property is introduced at HDCP 2.2, and
1042 * defaults to type 0. It is only exposed by drivers supporting HDCP 2.2
1043 * (hence supporting Type 0 and Type 1). Based on how next versions of
1044 * HDCP specs are defined content Type could be used for higher versions
1045 * too.
1046 *
1047 * If content type is changed when "Content Protection" is not UNDESIRED,
1048 * then kernel will disable the HDCP and re-enable with new type in the
1049 * same atomic commit. And when "Content Protection" is ENABLED, it means
1050 * that link is HDCP authenticated and encrypted, for the transmission of
1051 * the Type of stream mentioned at "HDCP Content Type".
1052 *
1053 * HDR_OUTPUT_METADATA:
1054 * Connector property to enable userspace to send HDR Metadata to
1055 * driver. This metadata is based on the composition and blending
1056 * policies decided by user, taking into account the hardware and
1057 * sink capabilities. The driver gets this metadata and creates a
1058 * Dynamic Range and Mastering Infoframe (DRM) in case of HDMI,
1059 * SDP packet (Non-audio INFOFRAME SDP v1.3) for DP. This is then
1060 * sent to sink. This notifies the sink of the upcoming frame's Color
1061 * Encoding and Luminance parameters.
1062 *
1063 * Userspace first need to detect the HDR capabilities of sink by
1064 * reading and parsing the EDID. Details of HDR metadata for HDMI
1065 * are added in CTA 861.G spec. For DP , its defined in VESA DP
1066 * Standard v1.4. It needs to then get the metadata information
1067 * of the video/game/app content which are encoded in HDR (basically
1068 * using HDR transfer functions). With this information it needs to
1069 * decide on a blending policy and compose the relevant
1070 * layers/overlays into a common format. Once this blending is done,
1071 * userspace will be aware of the metadata of the composed frame to
1072 * be send to sink. It then uses this property to communicate this
1073 * metadata to driver which then make a Infoframe packet and sends
1074 * to sink based on the type of encoder connected.
1075 *
1076 * Userspace will be responsible to do Tone mapping operation in case:
1077 * - Some layers are HDR and others are SDR
1078 * - HDR layers luminance is not same as sink
1079 *
1080 * It will even need to do colorspace conversion and get all layers
1081 * to one common colorspace for blending. It can use either GL, Media
1082 * or display engine to get this done based on the capabilties of the
1083 * associated hardware.
1084 *
1085 * Driver expects metadata to be put in &struct hdr_output_metadata
1086 * structure from userspace. This is received as blob and stored in
1087 * &drm_connector_state.hdr_output_metadata. It parses EDID and saves the
1088 * sink metadata in &struct hdr_sink_metadata, as
1089 * &drm_connector.hdr_sink_metadata. Driver uses
1090 * drm_hdmi_infoframe_set_hdr_metadata() helper to set the HDR metadata,
1091 * hdmi_drm_infoframe_pack() to pack the infoframe as per spec, in case of
1092 * HDMI encoder.
1093 *
1094 * max bpc:
1095 * This range property is used by userspace to limit the bit depth. When
1096 * used the driver would limit the bpc in accordance with the valid range
1097 * supported by the hardware and sink. Drivers to use the function
1098 * drm_connector_attach_max_bpc_property() to create and attach the
1099 * property to the connector during initialization.
1100 *
1101 * Connectors also have one standardized atomic property:
1102 *
1103 * CRTC_ID:
1104 * Mode object ID of the &drm_crtc this connector should be connected to.
1105 *
1106 * Connectors for LCD panels may also have one standardized property:
1107 *
1108 * panel orientation:
1109 * On some devices the LCD panel is mounted in the casing in such a way
1110 * that the up/top side of the panel does not match with the top side of
1111 * the device. Userspace can use this property to check for this.
1112 * Note that input coordinates from touchscreens (input devices with
1113 * INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
1114 * coordinates, so if userspace rotates the picture to adjust for
1115 * the orientation it must also apply the same transformation to the
1116 * touchscreen input coordinates. This property is initialized by calling
1117 * drm_connector_init_panel_orientation_property().
1118 *
1119 * scaling mode:
1120 * This property defines how a non-native mode is upscaled to the native
1121 * mode of an LCD panel:
1122 *
1123 * None:
1124 * No upscaling happens, scaling is left to the panel. Not all
1125 * drivers expose this mode.
1126 * Full:
1127 * The output is upscaled to the full resolution of the panel,
1128 * ignoring the aspect ratio.
1129 * Center:
1130 * No upscaling happens, the output is centered within the native
1131 * resolution the panel.
1132 * Full aspect:
1133 * The output is upscaled to maximize either the width or height
1134 * while retaining the aspect ratio.
1135 *
1136 * This property should be set up by calling
1137 * drm_connector_attach_scaling_mode_property(). Note that drivers
1138 * can also expose this property to external outputs, in which case they
1139 * must support "None", which should be the default (since external screens
1140 * have a built-in scaler).
1141 */
1142
1143int drm_connector_create_standard_properties(struct drm_device *dev)
1144{
1145 struct drm_property *prop;
1146
1147 prop = drm_property_create(dev, DRM_MODE_PROP_BLOB |
1148 DRM_MODE_PROP_IMMUTABLE,
1149 "EDID", 0);
1150 if (!prop)
1151 return -ENOMEM;
1152 dev->mode_config.edid_property = prop;
1153
1154 prop = drm_property_create_enum(dev, 0,
1155 "DPMS", drm_dpms_enum_list,
1156 ARRAY_SIZE(drm_dpms_enum_list));
1157 if (!prop)
1158 return -ENOMEM;
1159 dev->mode_config.dpms_property = prop;
1160
1161 prop = drm_property_create(dev,
1162 DRM_MODE_PROP_BLOB |
1163 DRM_MODE_PROP_IMMUTABLE,
1164 "PATH", 0);
1165 if (!prop)
1166 return -ENOMEM;
1167 dev->mode_config.path_property = prop;
1168
1169 prop = drm_property_create(dev,
1170 DRM_MODE_PROP_BLOB |
1171 DRM_MODE_PROP_IMMUTABLE,
1172 "TILE", 0);
1173 if (!prop)
1174 return -ENOMEM;
1175 dev->mode_config.tile_property = prop;
1176
1177 prop = drm_property_create_enum(dev, 0, "link-status",
1178 drm_link_status_enum_list,
1179 ARRAY_SIZE(drm_link_status_enum_list));
1180 if (!prop)
1181 return -ENOMEM;
1182 dev->mode_config.link_status_property = prop;
1183
1184 prop = drm_property_create_bool(dev, DRM_MODE_PROP_IMMUTABLE, "non-desktop");
1185 if (!prop)
1186 return -ENOMEM;
1187 dev->mode_config.non_desktop_property = prop;
1188
1189 prop = drm_property_create(dev, DRM_MODE_PROP_BLOB,
1190 "HDR_OUTPUT_METADATA", 0);
1191 if (!prop)
1192 return -ENOMEM;
1193 dev->mode_config.hdr_output_metadata_property = prop;
1194
1195 return 0;
1196}
1197
1198/**
1199 * drm_mode_create_dvi_i_properties - create DVI-I specific connector properties
1200 * @dev: DRM device
1201 *
1202 * Called by a driver the first time a DVI-I connector is made.
1203 */
1204int drm_mode_create_dvi_i_properties(struct drm_device *dev)
1205{
1206 struct drm_property *dvi_i_selector;
1207 struct drm_property *dvi_i_subconnector;
1208
1209 if (dev->mode_config.dvi_i_select_subconnector_property)
1210 return 0;
1211
1212 dvi_i_selector =
1213 drm_property_create_enum(dev, 0,
1214 "select subconnector",
1215 drm_dvi_i_select_enum_list,
1216 ARRAY_SIZE(drm_dvi_i_select_enum_list));
1217 dev->mode_config.dvi_i_select_subconnector_property = dvi_i_selector;
1218
1219 dvi_i_subconnector = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
1220 "subconnector",
1221 drm_dvi_i_subconnector_enum_list,
1222 ARRAY_SIZE(drm_dvi_i_subconnector_enum_list));
1223 dev->mode_config.dvi_i_subconnector_property = dvi_i_subconnector;
1224
1225 return 0;
1226}
1227EXPORT_SYMBOL(drm_mode_create_dvi_i_properties);
1228
1229/**
1230 * DOC: HDMI connector properties
1231 *
1232 * content type (HDMI specific):
1233 * Indicates content type setting to be used in HDMI infoframes to indicate
1234 * content type for the external device, so that it adjusts its display
1235 * settings accordingly.
1236 *
1237 * The value of this property can be one of the following:
1238 *
1239 * No Data:
1240 * Content type is unknown
1241 * Graphics:
1242 * Content type is graphics
1243 * Photo:
1244 * Content type is photo
1245 * Cinema:
1246 * Content type is cinema
1247 * Game:
1248 * Content type is game
1249 *
1250 * Drivers can set up this property by calling
1251 * drm_connector_attach_content_type_property(). Decoding to
1252 * infoframe values is done through drm_hdmi_avi_infoframe_content_type().
1253 */
1254
1255/**
1256 * drm_connector_attach_content_type_property - attach content-type property
1257 * @connector: connector to attach content type property on.
1258 *
1259 * Called by a driver the first time a HDMI connector is made.
1260 */
1261int drm_connector_attach_content_type_property(struct drm_connector *connector)
1262{
1263 if (!drm_mode_create_content_type_property(connector->dev))
1264 drm_object_attach_property(&connector->base,
1265 connector->dev->mode_config.content_type_property,
1266 DRM_MODE_CONTENT_TYPE_NO_DATA);
1267 return 0;
1268}
1269EXPORT_SYMBOL(drm_connector_attach_content_type_property);
1270
1271
1272/**
1273 * drm_hdmi_avi_infoframe_content_type() - fill the HDMI AVI infoframe
1274 * content type information, based
1275 * on correspondent DRM property.
1276 * @frame: HDMI AVI infoframe
1277 * @conn_state: DRM display connector state
1278 *
1279 */
1280void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame,
1281 const struct drm_connector_state *conn_state)
1282{
1283 switch (conn_state->content_type) {
1284 case DRM_MODE_CONTENT_TYPE_GRAPHICS:
1285 frame->content_type = HDMI_CONTENT_TYPE_GRAPHICS;
1286 break;
1287 case DRM_MODE_CONTENT_TYPE_CINEMA:
1288 frame->content_type = HDMI_CONTENT_TYPE_CINEMA;
1289 break;
1290 case DRM_MODE_CONTENT_TYPE_GAME:
1291 frame->content_type = HDMI_CONTENT_TYPE_GAME;
1292 break;
1293 case DRM_MODE_CONTENT_TYPE_PHOTO:
1294 frame->content_type = HDMI_CONTENT_TYPE_PHOTO;
1295 break;
1296 default:
1297 /* Graphics is the default(0) */
1298 frame->content_type = HDMI_CONTENT_TYPE_GRAPHICS;
1299 }
1300
1301 frame->itc = conn_state->content_type != DRM_MODE_CONTENT_TYPE_NO_DATA;
1302}
1303EXPORT_SYMBOL(drm_hdmi_avi_infoframe_content_type);
1304
1305/**
1306 * drm_mode_attach_tv_margin_properties - attach TV connector margin properties
1307 * @connector: DRM connector
1308 *
1309 * Called by a driver when it needs to attach TV margin props to a connector.
1310 * Typically used on SDTV and HDMI connectors.
1311 */
1312void drm_connector_attach_tv_margin_properties(struct drm_connector *connector)
1313{
1314 struct drm_device *dev = connector->dev;
1315
1316 drm_object_attach_property(&connector->base,
1317 dev->mode_config.tv_left_margin_property,
1318 0);
1319 drm_object_attach_property(&connector->base,
1320 dev->mode_config.tv_right_margin_property,
1321 0);
1322 drm_object_attach_property(&connector->base,
1323 dev->mode_config.tv_top_margin_property,
1324 0);
1325 drm_object_attach_property(&connector->base,
1326 dev->mode_config.tv_bottom_margin_property,
1327 0);
1328}
1329EXPORT_SYMBOL(drm_connector_attach_tv_margin_properties);
1330
1331/**
1332 * drm_mode_create_tv_margin_properties - create TV connector margin properties
1333 * @dev: DRM device
1334 *
1335 * Called by a driver's HDMI connector initialization routine, this function
1336 * creates the TV margin properties for a given device. No need to call this
1337 * function for an SDTV connector, it's already called from
1338 * drm_mode_create_tv_properties().
1339 */
1340int drm_mode_create_tv_margin_properties(struct drm_device *dev)
1341{
1342 if (dev->mode_config.tv_left_margin_property)
1343 return 0;
1344
1345 dev->mode_config.tv_left_margin_property =
1346 drm_property_create_range(dev, 0, "left margin", 0, 100);
1347 if (!dev->mode_config.tv_left_margin_property)
1348 return -ENOMEM;
1349
1350 dev->mode_config.tv_right_margin_property =
1351 drm_property_create_range(dev, 0, "right margin", 0, 100);
1352 if (!dev->mode_config.tv_right_margin_property)
1353 return -ENOMEM;
1354
1355 dev->mode_config.tv_top_margin_property =
1356 drm_property_create_range(dev, 0, "top margin", 0, 100);
1357 if (!dev->mode_config.tv_top_margin_property)
1358 return -ENOMEM;
1359
1360 dev->mode_config.tv_bottom_margin_property =
1361 drm_property_create_range(dev, 0, "bottom margin", 0, 100);
1362 if (!dev->mode_config.tv_bottom_margin_property)
1363 return -ENOMEM;
1364
1365 return 0;
1366}
1367EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
1368
1369/**
1370 * drm_mode_create_tv_properties - create TV specific connector properties
1371 * @dev: DRM device
1372 * @num_modes: number of different TV formats (modes) supported
1373 * @modes: array of pointers to strings containing name of each format
1374 *
1375 * Called by a driver's TV initialization routine, this function creates
1376 * the TV specific connector properties for a given device. Caller is
1377 * responsible for allocating a list of format names and passing them to
1378 * this routine.
1379 */
1380int drm_mode_create_tv_properties(struct drm_device *dev,
1381 unsigned int num_modes,
1382 const char * const modes[])
1383{
1384 struct drm_property *tv_selector;
1385 struct drm_property *tv_subconnector;
1386 unsigned int i;
1387
1388 if (dev->mode_config.tv_select_subconnector_property)
1389 return 0;
1390
1391 /*
1392 * Basic connector properties
1393 */
1394 tv_selector = drm_property_create_enum(dev, 0,
1395 "select subconnector",
1396 drm_tv_select_enum_list,
1397 ARRAY_SIZE(drm_tv_select_enum_list));
1398 if (!tv_selector)
1399 goto nomem;
1400
1401 dev->mode_config.tv_select_subconnector_property = tv_selector;
1402
1403 tv_subconnector =
1404 drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
1405 "subconnector",
1406 drm_tv_subconnector_enum_list,
1407 ARRAY_SIZE(drm_tv_subconnector_enum_list));
1408 if (!tv_subconnector)
1409 goto nomem;
1410 dev->mode_config.tv_subconnector_property = tv_subconnector;
1411
1412 /*
1413 * Other, TV specific properties: margins & TV modes.
1414 */
1415 if (drm_mode_create_tv_margin_properties(dev))
1416 goto nomem;
1417
1418 dev->mode_config.tv_mode_property =
1419 drm_property_create(dev, DRM_MODE_PROP_ENUM,
1420 "mode", num_modes);
1421 if (!dev->mode_config.tv_mode_property)
1422 goto nomem;
1423
1424 for (i = 0; i < num_modes; i++)
1425 drm_property_add_enum(dev->mode_config.tv_mode_property,
1426 i, modes[i]);
1427
1428 dev->mode_config.tv_brightness_property =
1429 drm_property_create_range(dev, 0, "brightness", 0, 100);
1430 if (!dev->mode_config.tv_brightness_property)
1431 goto nomem;
1432
1433 dev->mode_config.tv_contrast_property =
1434 drm_property_create_range(dev, 0, "contrast", 0, 100);
1435 if (!dev->mode_config.tv_contrast_property)
1436 goto nomem;
1437
1438 dev->mode_config.tv_flicker_reduction_property =
1439 drm_property_create_range(dev, 0, "flicker reduction", 0, 100);
1440 if (!dev->mode_config.tv_flicker_reduction_property)
1441 goto nomem;
1442
1443 dev->mode_config.tv_overscan_property =
1444 drm_property_create_range(dev, 0, "overscan", 0, 100);
1445 if (!dev->mode_config.tv_overscan_property)
1446 goto nomem;
1447
1448 dev->mode_config.tv_saturation_property =
1449 drm_property_create_range(dev, 0, "saturation", 0, 100);
1450 if (!dev->mode_config.tv_saturation_property)
1451 goto nomem;
1452
1453 dev->mode_config.tv_hue_property =
1454 drm_property_create_range(dev, 0, "hue", 0, 100);
1455 if (!dev->mode_config.tv_hue_property)
1456 goto nomem;
1457
1458 return 0;
1459nomem:
1460 return -ENOMEM;
1461}
1462EXPORT_SYMBOL(drm_mode_create_tv_properties);
1463
1464/**
1465 * drm_mode_create_scaling_mode_property - create scaling mode property
1466 * @dev: DRM device
1467 *
1468 * Called by a driver the first time it's needed, must be attached to desired
1469 * connectors.
1470 *
1471 * Atomic drivers should use drm_connector_attach_scaling_mode_property()
1472 * instead to correctly assign &drm_connector_state.picture_aspect_ratio
1473 * in the atomic state.
1474 */
1475int drm_mode_create_scaling_mode_property(struct drm_device *dev)
1476{
1477 struct drm_property *scaling_mode;
1478
1479 if (dev->mode_config.scaling_mode_property)
1480 return 0;
1481
1482 scaling_mode =
1483 drm_property_create_enum(dev, 0, "scaling mode",
1484 drm_scaling_mode_enum_list,
1485 ARRAY_SIZE(drm_scaling_mode_enum_list));
1486
1487 dev->mode_config.scaling_mode_property = scaling_mode;
1488
1489 return 0;
1490}
1491EXPORT_SYMBOL(drm_mode_create_scaling_mode_property);
1492
1493/**
1494 * DOC: Variable refresh properties
1495 *
1496 * Variable refresh rate capable displays can dynamically adjust their
1497 * refresh rate by extending the duration of their vertical front porch
1498 * until page flip or timeout occurs. This can reduce or remove stuttering
1499 * and latency in scenarios where the page flip does not align with the
1500 * vblank interval.
1501 *
1502 * An example scenario would be an application flipping at a constant rate
1503 * of 48Hz on a 60Hz display. The page flip will frequently miss the vblank
1504 * interval and the same contents will be displayed twice. This can be
1505 * observed as stuttering for content with motion.
1506 *
1507 * If variable refresh rate was active on a display that supported a
1508 * variable refresh range from 35Hz to 60Hz no stuttering would be observable
1509 * for the example scenario. The minimum supported variable refresh rate of
1510 * 35Hz is below the page flip frequency and the vertical front porch can
1511 * be extended until the page flip occurs. The vblank interval will be
1512 * directly aligned to the page flip rate.
1513 *
1514 * Not all userspace content is suitable for use with variable refresh rate.
1515 * Large and frequent changes in vertical front porch duration may worsen
1516 * perceived stuttering for input sensitive applications.
1517 *
1518 * Panel brightness will also vary with vertical front porch duration. Some
1519 * panels may have noticeable differences in brightness between the minimum
1520 * vertical front porch duration and the maximum vertical front porch duration.
1521 * Large and frequent changes in vertical front porch duration may produce
1522 * observable flickering for such panels.
1523 *
1524 * Userspace control for variable refresh rate is supported via properties
1525 * on the &drm_connector and &drm_crtc objects.
1526 *
1527 * "vrr_capable":
1528 * Optional &drm_connector boolean property that drivers should attach
1529 * with drm_connector_attach_vrr_capable_property() on connectors that
1530 * could support variable refresh rates. Drivers should update the
1531 * property value by calling drm_connector_set_vrr_capable_property().
1532 *
1533 * Absence of the property should indicate absence of support.
1534 *
1535 * "VRR_ENABLED":
1536 * Default &drm_crtc boolean property that notifies the driver that the
1537 * content on the CRTC is suitable for variable refresh rate presentation.
1538 * The driver will take this property as a hint to enable variable
1539 * refresh rate support if the receiver supports it, ie. if the
1540 * "vrr_capable" property is true on the &drm_connector object. The
1541 * vertical front porch duration will be extended until page-flip or
1542 * timeout when enabled.
1543 *
1544 * The minimum vertical front porch duration is defined as the vertical
1545 * front porch duration for the current mode.
1546 *
1547 * The maximum vertical front porch duration is greater than or equal to
1548 * the minimum vertical front porch duration. The duration is derived
1549 * from the minimum supported variable refresh rate for the connector.
1550 *
1551 * The driver may place further restrictions within these minimum
1552 * and maximum bounds.
1553 */
1554
1555/**
1556 * drm_connector_attach_vrr_capable_property - creates the
1557 * vrr_capable property
1558 * @connector: connector to create the vrr_capable property on.
1559 *
1560 * This is used by atomic drivers to add support for querying
1561 * variable refresh rate capability for a connector.
1562 *
1563 * Returns:
1564 * Zero on success, negative errono on failure.
1565 */
1566int drm_connector_attach_vrr_capable_property(
1567 struct drm_connector *connector)
1568{
1569 struct drm_device *dev = connector->dev;
1570 struct drm_property *prop;
1571
1572 if (!connector->vrr_capable_property) {
1573 prop = drm_property_create_bool(dev, DRM_MODE_PROP_IMMUTABLE,
1574 "vrr_capable");
1575 if (!prop)
1576 return -ENOMEM;
1577
1578 connector->vrr_capable_property = prop;
1579 drm_object_attach_property(&connector->base, prop, 0);
1580 }
1581
1582 return 0;
1583}
1584EXPORT_SYMBOL(drm_connector_attach_vrr_capable_property);
1585
1586/**
1587 * drm_connector_attach_scaling_mode_property - attach atomic scaling mode property
1588 * @connector: connector to attach scaling mode property on.
1589 * @scaling_mode_mask: or'ed mask of BIT(%DRM_MODE_SCALE_\*).
1590 *
1591 * This is used to add support for scaling mode to atomic drivers.
1592 * The scaling mode will be set to &drm_connector_state.picture_aspect_ratio
1593 * and can be used from &drm_connector_helper_funcs->atomic_check for validation.
1594 *
1595 * This is the atomic version of drm_mode_create_scaling_mode_property().
1596 *
1597 * Returns:
1598 * Zero on success, negative errno on failure.
1599 */
1600int drm_connector_attach_scaling_mode_property(struct drm_connector *connector,
1601 u32 scaling_mode_mask)
1602{
1603 struct drm_device *dev = connector->dev;
1604 struct drm_property *scaling_mode_property;
1605 int i;
1606 const unsigned valid_scaling_mode_mask =
1607 (1U << ARRAY_SIZE(drm_scaling_mode_enum_list)) - 1;
1608
1609 if (WARN_ON(hweight32(scaling_mode_mask) < 2 ||
1610 scaling_mode_mask & ~valid_scaling_mode_mask))
1611 return -EINVAL;
1612
1613 scaling_mode_property =
1614 drm_property_create(dev, DRM_MODE_PROP_ENUM, "scaling mode",
1615 hweight32(scaling_mode_mask));
1616
1617 if (!scaling_mode_property)
1618 return -ENOMEM;
1619
1620 for (i = 0; i < ARRAY_SIZE(drm_scaling_mode_enum_list); i++) {
1621 int ret;
1622
1623 if (!(BIT(i) & scaling_mode_mask))
1624 continue;
1625
1626 ret = drm_property_add_enum(scaling_mode_property,
1627 drm_scaling_mode_enum_list[i].type,
1628 drm_scaling_mode_enum_list[i].name);
1629
1630 if (ret) {
1631 drm_property_destroy(dev, scaling_mode_property);
1632
1633 return ret;
1634 }
1635 }
1636
1637 drm_object_attach_property(&connector->base,
1638 scaling_mode_property, 0);
1639
1640 connector->scaling_mode_property = scaling_mode_property;
1641
1642 return 0;
1643}
1644EXPORT_SYMBOL(drm_connector_attach_scaling_mode_property);
1645
1646/**
1647 * drm_mode_create_aspect_ratio_property - create aspect ratio property
1648 * @dev: DRM device
1649 *
1650 * Called by a driver the first time it's needed, must be attached to desired
1651 * connectors.
1652 *
1653 * Returns:
1654 * Zero on success, negative errno on failure.
1655 */
1656int drm_mode_create_aspect_ratio_property(struct drm_device *dev)
1657{
1658 if (dev->mode_config.aspect_ratio_property)
1659 return 0;
1660
1661 dev->mode_config.aspect_ratio_property =
1662 drm_property_create_enum(dev, 0, "aspect ratio",
1663 drm_aspect_ratio_enum_list,
1664 ARRAY_SIZE(drm_aspect_ratio_enum_list));
1665
1666 if (dev->mode_config.aspect_ratio_property == NULL)
1667 return -ENOMEM;
1668
1669 return 0;
1670}
1671EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property);
1672
1673/**
1674 * DOC: standard connector properties
1675 *
1676 * Colorspace:
1677 * drm_mode_create_colorspace_property - create colorspace property
1678 * This property helps select a suitable colorspace based on the sink
1679 * capability. Modern sink devices support wider gamut like BT2020.
1680 * This helps switch to BT2020 mode if the BT2020 encoded video stream
1681 * is being played by the user, same for any other colorspace. Thereby
1682 * giving a good visual experience to users.
1683 *
1684 * The expectation from userspace is that it should parse the EDID
1685 * and get supported colorspaces. Use this property and switch to the
1686 * one supported. Sink supported colorspaces should be retrieved by
1687 * userspace from EDID and driver will not explicitly expose them.
1688 *
1689 * Basically the expectation from userspace is:
1690 * - Set up CRTC DEGAMMA/CTM/GAMMA to convert to some sink
1691 * colorspace
1692 * - Set this new property to let the sink know what it
1693 * converted the CRTC output to.
1694 * - This property is just to inform sink what colorspace
1695 * source is trying to drive.
1696 *
1697 * Called by a driver the first time it's needed, must be attached to desired
1698 * connectors.
1699 */
1700int drm_mode_create_colorspace_property(struct drm_connector *connector)
1701{
1702 struct drm_device *dev = connector->dev;
1703 struct drm_property *prop;
1704
1705 if (connector->connector_type == DRM_MODE_CONNECTOR_HDMIA ||
1706 connector->connector_type == DRM_MODE_CONNECTOR_HDMIB) {
1707 prop = drm_property_create_enum(dev, DRM_MODE_PROP_ENUM,
1708 "Colorspace",
1709 hdmi_colorspaces,
1710 ARRAY_SIZE(hdmi_colorspaces));
1711 if (!prop)
1712 return -ENOMEM;
1713 } else {
1714 DRM_DEBUG_KMS("Colorspace property not supported\n");
1715 return 0;
1716 }
1717
1718 connector->colorspace_property = prop;
1719
1720 return 0;
1721}
1722EXPORT_SYMBOL(drm_mode_create_colorspace_property);
1723
1724/**
1725 * drm_mode_create_content_type_property - create content type property
1726 * @dev: DRM device
1727 *
1728 * Called by a driver the first time it's needed, must be attached to desired
1729 * connectors.
1730 *
1731 * Returns:
1732 * Zero on success, negative errno on failure.
1733 */
1734int drm_mode_create_content_type_property(struct drm_device *dev)
1735{
1736 if (dev->mode_config.content_type_property)
1737 return 0;
1738
1739 dev->mode_config.content_type_property =
1740 drm_property_create_enum(dev, 0, "content type",
1741 drm_content_type_enum_list,
1742 ARRAY_SIZE(drm_content_type_enum_list));
1743
1744 if (dev->mode_config.content_type_property == NULL)
1745 return -ENOMEM;
1746
1747 return 0;
1748}
1749EXPORT_SYMBOL(drm_mode_create_content_type_property);
1750
1751/**
1752 * drm_mode_create_suggested_offset_properties - create suggests offset properties
1753 * @dev: DRM device
1754 *
1755 * Create the the suggested x/y offset property for connectors.
1756 */
1757int drm_mode_create_suggested_offset_properties(struct drm_device *dev)
1758{
1759 if (dev->mode_config.suggested_x_property && dev->mode_config.suggested_y_property)
1760 return 0;
1761
1762 dev->mode_config.suggested_x_property =
1763 drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested X", 0, 0xffffffff);
1764
1765 dev->mode_config.suggested_y_property =
1766 drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested Y", 0, 0xffffffff);
1767
1768 if (dev->mode_config.suggested_x_property == NULL ||
1769 dev->mode_config.suggested_y_property == NULL)
1770 return -ENOMEM;
1771 return 0;
1772}
1773EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties);
1774
1775/**
1776 * drm_connector_set_path_property - set tile property on connector
1777 * @connector: connector to set property on.
1778 * @path: path to use for property; must not be NULL.
1779 *
1780 * This creates a property to expose to userspace to specify a
1781 * connector path. This is mainly used for DisplayPort MST where
1782 * connectors have a topology and we want to allow userspace to give
1783 * them more meaningful names.
1784 *
1785 * Returns:
1786 * Zero on success, negative errno on failure.
1787 */
1788int drm_connector_set_path_property(struct drm_connector *connector,
1789 const char *path)
1790{
1791 struct drm_device *dev = connector->dev;
1792 int ret;
1793
1794 ret = drm_property_replace_global_blob(dev,
1795 &connector->path_blob_ptr,
1796 strlen(path) + 1,
1797 path,
1798 &connector->base,
1799 dev->mode_config.path_property);
1800 return ret;
1801}
1802EXPORT_SYMBOL(drm_connector_set_path_property);
1803
1804/**
1805 * drm_connector_set_tile_property - set tile property on connector
1806 * @connector: connector to set property on.
1807 *
1808 * This looks up the tile information for a connector, and creates a
1809 * property for userspace to parse if it exists. The property is of
1810 * the form of 8 integers using ':' as a separator.
1811 * This is used for dual port tiled displays with DisplayPort SST
1812 * or DisplayPort MST connectors.
1813 *
1814 * Returns:
1815 * Zero on success, errno on failure.
1816 */
1817int drm_connector_set_tile_property(struct drm_connector *connector)
1818{
1819 struct drm_device *dev = connector->dev;
1820 char tile[256];
1821 int ret;
1822
1823 if (!connector->has_tile) {
1824 ret = drm_property_replace_global_blob(dev,
1825 &connector->tile_blob_ptr,
1826 0,
1827 NULL,
1828 &connector->base,
1829 dev->mode_config.tile_property);
1830 return ret;
1831 }
1832
1833 snprintf(tile, 256, "%d:%d:%d:%d:%d:%d:%d:%d",
1834 connector->tile_group->id, connector->tile_is_single_monitor,
1835 connector->num_h_tile, connector->num_v_tile,
1836 connector->tile_h_loc, connector->tile_v_loc,
1837 connector->tile_h_size, connector->tile_v_size);
1838
1839 ret = drm_property_replace_global_blob(dev,
1840 &connector->tile_blob_ptr,
1841 strlen(tile) + 1,
1842 tile,
1843 &connector->base,
1844 dev->mode_config.tile_property);
1845 return ret;
1846}
1847EXPORT_SYMBOL(drm_connector_set_tile_property);
1848
1849/**
1850 * drm_connector_update_edid_property - update the edid property of a connector
1851 * @connector: drm connector
1852 * @edid: new value of the edid property
1853 *
1854 * This function creates a new blob modeset object and assigns its id to the
1855 * connector's edid property.
1856 * Since we also parse tile information from EDID's displayID block, we also
1857 * set the connector's tile property here. See drm_connector_set_tile_property()
1858 * for more details.
1859 *
1860 * Returns:
1861 * Zero on success, negative errno on failure.
1862 */
1863int drm_connector_update_edid_property(struct drm_connector *connector,
1864 const struct edid *edid)
1865{
1866 struct drm_device *dev = connector->dev;
1867 size_t size = 0;
1868 int ret;
1869
1870 /* ignore requests to set edid when overridden */
1871 if (connector->override_edid)
1872 return 0;
1873
1874 if (edid)
1875 size = EDID_LENGTH * (1 + edid->extensions);
1876
1877 /* Set the display info, using edid if available, otherwise
1878 * reseting the values to defaults. This duplicates the work
1879 * done in drm_add_edid_modes, but that function is not
1880 * consistently called before this one in all drivers and the
1881 * computation is cheap enough that it seems better to
1882 * duplicate it rather than attempt to ensure some arbitrary
1883 * ordering of calls.
1884 */
1885 if (edid)
1886 drm_add_display_info(connector, edid);
1887 else
1888 drm_reset_display_info(connector);
1889
1890 drm_object_property_set_value(&connector->base,
1891 dev->mode_config.non_desktop_property,
1892 connector->display_info.non_desktop);
1893
1894 ret = drm_property_replace_global_blob(dev,
1895 &connector->edid_blob_ptr,
1896 size,
1897 edid,
1898 &connector->base,
1899 dev->mode_config.edid_property);
1900 if (ret)
1901 return ret;
1902 return drm_connector_set_tile_property(connector);
1903}
1904EXPORT_SYMBOL(drm_connector_update_edid_property);
1905
1906/**
1907 * drm_connector_set_link_status_property - Set link status property of a connector
1908 * @connector: drm connector
1909 * @link_status: new value of link status property (0: Good, 1: Bad)
1910 *
1911 * In usual working scenario, this link status property will always be set to
1912 * "GOOD". If something fails during or after a mode set, the kernel driver
1913 * may set this link status property to "BAD". The caller then needs to send a
1914 * hotplug uevent for userspace to re-check the valid modes through
1915 * GET_CONNECTOR_IOCTL and retry modeset.
1916 *
1917 * Note: Drivers cannot rely on userspace to support this property and
1918 * issue a modeset. As such, they may choose to handle issues (like
1919 * re-training a link) without userspace's intervention.
1920 *
1921 * The reason for adding this property is to handle link training failures, but
1922 * it is not limited to DP or link training. For example, if we implement
1923 * asynchronous setcrtc, this property can be used to report any failures in that.
1924 */
1925void drm_connector_set_link_status_property(struct drm_connector *connector,
1926 uint64_t link_status)
1927{
1928 struct drm_device *dev = connector->dev;
1929
1930 drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
1931 connector->state->link_status = link_status;
1932 drm_modeset_unlock(&dev->mode_config.connection_mutex);
1933}
1934EXPORT_SYMBOL(drm_connector_set_link_status_property);
1935
1936/**
1937 * drm_connector_attach_max_bpc_property - attach "max bpc" property
1938 * @connector: connector to attach max bpc property on.
1939 * @min: The minimum bit depth supported by the connector.
1940 * @max: The maximum bit depth supported by the connector.
1941 *
1942 * This is used to add support for limiting the bit depth on a connector.
1943 *
1944 * Returns:
1945 * Zero on success, negative errno on failure.
1946 */
1947int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
1948 int min, int max)
1949{
1950 struct drm_device *dev = connector->dev;
1951 struct drm_property *prop;
1952
1953 prop = connector->max_bpc_property;
1954 if (!prop) {
1955 prop = drm_property_create_range(dev, 0, "max bpc", min, max);
1956 if (!prop)
1957 return -ENOMEM;
1958
1959 connector->max_bpc_property = prop;
1960 }
1961
1962 drm_object_attach_property(&connector->base, prop, max);
1963 connector->state->max_requested_bpc = max;
1964 connector->state->max_bpc = max;
1965
1966 return 0;
1967}
1968EXPORT_SYMBOL(drm_connector_attach_max_bpc_property);
1969
1970/**
1971 * drm_connector_set_vrr_capable_property - sets the variable refresh rate
1972 * capable property for a connector
1973 * @connector: drm connector
1974 * @capable: True if the connector is variable refresh rate capable
1975 *
1976 * Should be used by atomic drivers to update the indicated support for
1977 * variable refresh rate over a connector.
1978 */
1979void drm_connector_set_vrr_capable_property(
1980 struct drm_connector *connector, bool capable)
1981{
1982 drm_object_property_set_value(&connector->base,
1983 connector->vrr_capable_property,
1984 capable);
1985}
1986EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
1987
1988/**
1989 * drm_connector_init_panel_orientation_property -
1990 * initialize the connecters panel_orientation property
1991 * @connector: connector for which to init the panel-orientation property.
1992 * @width: width in pixels of the panel, used for panel quirk detection
1993 * @height: height in pixels of the panel, used for panel quirk detection
1994 *
1995 * This function should only be called for built-in panels, after setting
1996 * connector->display_info.panel_orientation first (if known).
1997 *
1998 * This function will check for platform specific (e.g. DMI based) quirks
1999 * overriding display_info.panel_orientation first, then if panel_orientation
2000 * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
2001 * "panel orientation" property to the connector.
2002 *
2003 * Returns:
2004 * Zero on success, negative errno on failure.
2005 */
2006int drm_connector_init_panel_orientation_property(
2007 struct drm_connector *connector, int width, int height)
2008{
2009 struct drm_device *dev = connector->dev;
2010 struct drm_display_info *info = &connector->display_info;
2011 struct drm_property *prop;
2012 int orientation_quirk;
2013
2014 orientation_quirk = drm_get_panel_orientation_quirk(width, height);
2015 if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
2016 info->panel_orientation = orientation_quirk;
2017
2018 if (info->panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
2019 return 0;
2020
2021 prop = dev->mode_config.panel_orientation_property;
2022 if (!prop) {
2023 prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
2024 "panel orientation",
2025 drm_panel_orientation_enum_list,
2026 ARRAY_SIZE(drm_panel_orientation_enum_list));
2027 if (!prop)
2028 return -ENOMEM;
2029
2030 dev->mode_config.panel_orientation_property = prop;
2031 }
2032
2033 drm_object_attach_property(&connector->base, prop,
2034 info->panel_orientation);
2035 return 0;
2036}
2037EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
2038
2039int drm_connector_set_obj_prop(struct drm_mode_object *obj,
2040 struct drm_property *property,
2041 uint64_t value)
2042{
2043 int ret = -EINVAL;
2044 struct drm_connector *connector = obj_to_connector(obj);
2045
2046 /* Do DPMS ourselves */
2047 if (property == connector->dev->mode_config.dpms_property) {
2048 ret = (*connector->funcs->dpms)(connector, (int)value);
2049 } else if (connector->funcs->set_property)
2050 ret = connector->funcs->set_property(connector, property, value);
2051
2052 if (!ret)
2053 drm_object_property_set_value(&connector->base, property, value);
2054 return ret;
2055}
2056
2057int drm_connector_property_set_ioctl(struct drm_device *dev,
2058 void *data, struct drm_file *file_priv)
2059{
2060 struct drm_mode_connector_set_property *conn_set_prop = data;
2061 struct drm_mode_obj_set_property obj_set_prop = {
2062 .value = conn_set_prop->value,
2063 .prop_id = conn_set_prop->prop_id,
2064 .obj_id = conn_set_prop->connector_id,
2065 .obj_type = DRM_MODE_OBJECT_CONNECTOR
2066 };
2067
2068 /* It does all the locking and checking we need */
2069 return drm_mode_obj_set_property_ioctl(dev, &obj_set_prop, file_priv);
2070}
2071
2072static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *connector)
2073{
2074 /* For atomic drivers only state objects are synchronously updated and
2075 * protected by modeset locks, so check those first. */
2076 if (connector->state)
2077 return connector->state->best_encoder;
2078 return connector->encoder;
2079}
2080
2081static bool
2082drm_mode_expose_to_userspace(const struct drm_display_mode *mode,
2083 const struct list_head *export_list,
2084 const struct drm_file *file_priv)
2085{
2086 /*
2087 * If user-space hasn't configured the driver to expose the stereo 3D
2088 * modes, don't expose them.
2089 */
2090 if (!file_priv->stereo_allowed && drm_mode_is_stereo(mode))
2091 return false;
2092 /*
2093 * If user-space hasn't configured the driver to expose the modes
2094 * with aspect-ratio, don't expose them. However if such a mode
2095 * is unique, let it be exposed, but reset the aspect-ratio flags
2096 * while preparing the list of user-modes.
2097 */
2098 if (!file_priv->aspect_ratio_allowed) {
2099 struct drm_display_mode *mode_itr;
2100
2101 list_for_each_entry(mode_itr, export_list, export_head)
2102 if (drm_mode_match(mode_itr, mode,
2103 DRM_MODE_MATCH_TIMINGS |
2104 DRM_MODE_MATCH_CLOCK |
2105 DRM_MODE_MATCH_FLAGS |
2106 DRM_MODE_MATCH_3D_FLAGS))
2107 return false;
2108 }
2109
2110 return true;
2111}
2112
2113int drm_mode_getconnector(struct drm_device *dev, void *data,
2114 struct drm_file *file_priv)
2115{
2116 struct drm_mode_get_connector *out_resp = data;
2117 struct drm_connector *connector;
2118 struct drm_encoder *encoder;
2119 struct drm_display_mode *mode;
2120 int mode_count = 0;
2121 int encoders_count = 0;
2122 int ret = 0;
2123 int copied = 0;
2124 int i;
2125 struct drm_mode_modeinfo u_mode;
2126 struct drm_mode_modeinfo __user *mode_ptr;
2127 uint32_t __user *encoder_ptr;
2128 LIST_HEAD(export_list);
2129
2130 if (!drm_core_check_feature(dev, DRIVER_MODESET))
2131 return -EOPNOTSUPP;
2132
2133 memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo));
2134
2135 connector = drm_connector_lookup(dev, file_priv, out_resp->connector_id);
2136 if (!connector)
2137 return -ENOENT;
2138
2139 drm_connector_for_each_possible_encoder(connector, encoder, i)
2140 encoders_count++;
2141
2142 if ((out_resp->count_encoders >= encoders_count) && encoders_count) {
2143 copied = 0;
2144 encoder_ptr = (uint32_t __user *)(unsigned long)(out_resp->encoders_ptr);
2145
2146 drm_connector_for_each_possible_encoder(connector, encoder, i) {
2147 if (put_user(encoder->base.id, encoder_ptr + copied)) {
2148 ret = -EFAULT;
2149 goto out;
2150 }
2151 copied++;
2152 }
2153 }
2154 out_resp->count_encoders = encoders_count;
2155
2156 out_resp->connector_id = connector->base.id;
2157 out_resp->connector_type = connector->connector_type;
2158 out_resp->connector_type_id = connector->connector_type_id;
2159
2160 mutex_lock(&dev->mode_config.mutex);
2161 if (out_resp->count_modes == 0) {
2162 connector->funcs->fill_modes(connector,
2163 dev->mode_config.max_width,
2164 dev->mode_config.max_height);
2165 }
2166
2167 out_resp->mm_width = connector->display_info.width_mm;
2168 out_resp->mm_height = connector->display_info.height_mm;
2169 out_resp->subpixel = connector->display_info.subpixel_order;
2170 out_resp->connection = connector->status;
2171
2172 /* delayed so we get modes regardless of pre-fill_modes state */
2173 list_for_each_entry(mode, &connector->modes, head)
2174 if (drm_mode_expose_to_userspace(mode, &export_list,
2175 file_priv)) {
2176 list_add_tail(&mode->export_head, &export_list);
2177 mode_count++;
2178 }
2179
2180 /*
2181 * This ioctl is called twice, once to determine how much space is
2182 * needed, and the 2nd time to fill it.
2183 * The modes that need to be exposed to the user are maintained in the
2184 * 'export_list'. When the ioctl is called first time to determine the,
2185 * space, the export_list gets filled, to find the no.of modes. In the
2186 * 2nd time, the user modes are filled, one by one from the export_list.
2187 */
2188 if ((out_resp->count_modes >= mode_count) && mode_count) {
2189 copied = 0;
2190 mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long)out_resp->modes_ptr;
2191 list_for_each_entry(mode, &export_list, export_head) {
2192 drm_mode_convert_to_umode(&u_mode, mode);
2193 /*
2194 * Reset aspect ratio flags of user-mode, if modes with
2195 * aspect-ratio are not supported.
2196 */
2197 if (!file_priv->aspect_ratio_allowed)
2198 u_mode.flags &= ~DRM_MODE_FLAG_PIC_AR_MASK;
2199 if (copy_to_user(mode_ptr + copied,
2200 &u_mode, sizeof(u_mode))) {
2201 ret = -EFAULT;
2202 mutex_unlock(&dev->mode_config.mutex);
2203
2204 goto out;
2205 }
2206 copied++;
2207 }
2208 }
2209 out_resp->count_modes = mode_count;
2210 mutex_unlock(&dev->mode_config.mutex);
2211
2212 drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
2213 encoder = drm_connector_get_encoder(connector);
2214 if (encoder)
2215 out_resp->encoder_id = encoder->base.id;
2216 else
2217 out_resp->encoder_id = 0;
2218
2219 /* Only grab properties after probing, to make sure EDID and other
2220 * properties reflect the latest status. */
2221 ret = drm_mode_object_get_properties(&connector->base, file_priv->atomic,
2222 (uint32_t __user *)(unsigned long)(out_resp->props_ptr),
2223 (uint64_t __user *)(unsigned long)(out_resp->prop_values_ptr),
2224 &out_resp->count_props);
2225 drm_modeset_unlock(&dev->mode_config.connection_mutex);
2226
2227out:
2228 drm_connector_put(connector);
2229
2230 return ret;
2231}
2232
2233
2234/**
2235 * DOC: Tile group
2236 *
2237 * Tile groups are used to represent tiled monitors with a unique integer
2238 * identifier. Tiled monitors using DisplayID v1.3 have a unique 8-byte handle,
2239 * we store this in a tile group, so we have a common identifier for all tiles
2240 * in a monitor group. The property is called "TILE". Drivers can manage tile
2241 * groups using drm_mode_create_tile_group(), drm_mode_put_tile_group() and
2242 * drm_mode_get_tile_group(). But this is only needed for internal panels where
2243 * the tile group information is exposed through a non-standard way.
2244 */
2245
2246static void drm_tile_group_free(struct kref *kref)
2247{
2248 struct drm_tile_group *tg = container_of(kref, struct drm_tile_group, refcount);
2249 struct drm_device *dev = tg->dev;
2250 mutex_lock(&dev->mode_config.idr_mutex);
2251 idr_remove(&dev->mode_config.tile_idr, tg->id);
2252 mutex_unlock(&dev->mode_config.idr_mutex);
2253 kfree(tg);
2254}
2255
2256/**
2257 * drm_mode_put_tile_group - drop a reference to a tile group.
2258 * @dev: DRM device
2259 * @tg: tile group to drop reference to.
2260 *
2261 * drop reference to tile group and free if 0.
2262 */
2263void drm_mode_put_tile_group(struct drm_device *dev,
2264 struct drm_tile_group *tg)
2265{
2266 kref_put(&tg->refcount, drm_tile_group_free);
2267}
2268EXPORT_SYMBOL(drm_mode_put_tile_group);
2269
2270/**
2271 * drm_mode_get_tile_group - get a reference to an existing tile group
2272 * @dev: DRM device
2273 * @topology: 8-bytes unique per monitor.
2274 *
2275 * Use the unique bytes to get a reference to an existing tile group.
2276 *
2277 * RETURNS:
2278 * tile group or NULL if not found.
2279 */
2280struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev,
2281 char topology[8])
2282{
2283 struct drm_tile_group *tg;
2284 int id;
2285 mutex_lock(&dev->mode_config.idr_mutex);
2286 idr_for_each_entry(&dev->mode_config.tile_idr, tg, id) {
2287 if (!memcmp(tg->group_data, topology, 8)) {
2288 if (!kref_get_unless_zero(&tg->refcount))
2289 tg = NULL;
2290 mutex_unlock(&dev->mode_config.idr_mutex);
2291 return tg;
2292 }
2293 }
2294 mutex_unlock(&dev->mode_config.idr_mutex);
2295 return NULL;
2296}
2297EXPORT_SYMBOL(drm_mode_get_tile_group);
2298
2299/**
2300 * drm_mode_create_tile_group - create a tile group from a displayid description
2301 * @dev: DRM device
2302 * @topology: 8-bytes unique per monitor.
2303 *
2304 * Create a tile group for the unique monitor, and get a unique
2305 * identifier for the tile group.
2306 *
2307 * RETURNS:
2308 * new tile group or NULL.
2309 */
2310struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
2311 char topology[8])
2312{
2313 struct drm_tile_group *tg;
2314 int ret;
2315
2316 tg = kzalloc(sizeof(*tg), GFP_KERNEL);
2317 if (!tg)
2318 return NULL;
2319
2320 kref_init(&tg->refcount);
2321 memcpy(tg->group_data, topology, 8);
2322 tg->dev = dev;
2323
2324 mutex_lock(&dev->mode_config.idr_mutex);
2325 ret = idr_alloc(&dev->mode_config.tile_idr, tg, 1, 0, GFP_KERNEL);
2326 if (ret >= 0) {
2327 tg->id = ret;
2328 } else {
2329 kfree(tg);
2330 tg = NULL;
2331 }
2332
2333 mutex_unlock(&dev->mode_config.idr_mutex);
2334 return tg;
2335}
2336EXPORT_SYMBOL(drm_mode_create_tile_group);
1/*
2 * Copyright (c) 2016 Intel Corporation
3 *
4 * Permission to use, copy, modify, distribute, and sell this software and its
5 * documentation for any purpose is hereby granted without fee, provided that
6 * the above copyright notice appear in all copies and that both that copyright
7 * notice and this permission notice appear in supporting documentation, and
8 * that the name of the copyright holders not be used in advertising or
9 * publicity pertaining to distribution of the software without specific,
10 * written prior permission. The copyright holders make no representations
11 * about the suitability of this software for any purpose. It is provided "as
12 * is" without express or implied warranty.
13 *
14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
20 * OF THIS SOFTWARE.
21 */
22
23#include <drm/drm_auth.h>
24#include <drm/drm_connector.h>
25#include <drm/drm_drv.h>
26#include <drm/drm_edid.h>
27#include <drm/drm_encoder.h>
28#include <drm/drm_file.h>
29#include <drm/drm_managed.h>
30#include <drm/drm_panel.h>
31#include <drm/drm_print.h>
32#include <drm/drm_privacy_screen_consumer.h>
33#include <drm/drm_sysfs.h>
34#include <drm/drm_utils.h>
35
36#include <linux/property.h>
37#include <linux/uaccess.h>
38
39#include <video/cmdline.h>
40
41#include "drm_crtc_internal.h"
42#include "drm_internal.h"
43
44/**
45 * DOC: overview
46 *
47 * In DRM connectors are the general abstraction for display sinks, and include
48 * also fixed panels or anything else that can display pixels in some form. As
49 * opposed to all other KMS objects representing hardware (like CRTC, encoder or
50 * plane abstractions) connectors can be hotplugged and unplugged at runtime.
51 * Hence they are reference-counted using drm_connector_get() and
52 * drm_connector_put().
53 *
54 * KMS driver must create, initialize, register and attach at a &struct
55 * drm_connector for each such sink. The instance is created as other KMS
56 * objects and initialized by setting the following fields. The connector is
57 * initialized with a call to drm_connector_init() with a pointer to the
58 * &struct drm_connector_funcs and a connector type, and then exposed to
59 * userspace with a call to drm_connector_register().
60 *
61 * Connectors must be attached to an encoder to be used. For devices that map
62 * connectors to encoders 1:1, the connector should be attached at
63 * initialization time with a call to drm_connector_attach_encoder(). The
64 * driver must also set the &drm_connector.encoder field to point to the
65 * attached encoder.
66 *
67 * For connectors which are not fixed (like built-in panels) the driver needs to
68 * support hotplug notifications. The simplest way to do that is by using the
69 * probe helpers, see drm_kms_helper_poll_init() for connectors which don't have
70 * hardware support for hotplug interrupts. Connectors with hardware hotplug
71 * support can instead use e.g. drm_helper_hpd_irq_event().
72 */
73
74/*
75 * Global connector list for drm_connector_find_by_fwnode().
76 * Note drm_connector_[un]register() first take connector->lock and then
77 * take the connector_list_lock.
78 */
79static DEFINE_MUTEX(connector_list_lock);
80static LIST_HEAD(connector_list);
81
82struct drm_conn_prop_enum_list {
83 int type;
84 const char *name;
85 struct ida ida;
86};
87
88/*
89 * Connector and encoder types.
90 */
91static struct drm_conn_prop_enum_list drm_connector_enum_list[] = {
92 { DRM_MODE_CONNECTOR_Unknown, "Unknown" },
93 { DRM_MODE_CONNECTOR_VGA, "VGA" },
94 { DRM_MODE_CONNECTOR_DVII, "DVI-I" },
95 { DRM_MODE_CONNECTOR_DVID, "DVI-D" },
96 { DRM_MODE_CONNECTOR_DVIA, "DVI-A" },
97 { DRM_MODE_CONNECTOR_Composite, "Composite" },
98 { DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO" },
99 { DRM_MODE_CONNECTOR_LVDS, "LVDS" },
100 { DRM_MODE_CONNECTOR_Component, "Component" },
101 { DRM_MODE_CONNECTOR_9PinDIN, "DIN" },
102 { DRM_MODE_CONNECTOR_DisplayPort, "DP" },
103 { DRM_MODE_CONNECTOR_HDMIA, "HDMI-A" },
104 { DRM_MODE_CONNECTOR_HDMIB, "HDMI-B" },
105 { DRM_MODE_CONNECTOR_TV, "TV" },
106 { DRM_MODE_CONNECTOR_eDP, "eDP" },
107 { DRM_MODE_CONNECTOR_VIRTUAL, "Virtual" },
108 { DRM_MODE_CONNECTOR_DSI, "DSI" },
109 { DRM_MODE_CONNECTOR_DPI, "DPI" },
110 { DRM_MODE_CONNECTOR_WRITEBACK, "Writeback" },
111 { DRM_MODE_CONNECTOR_SPI, "SPI" },
112 { DRM_MODE_CONNECTOR_USB, "USB" },
113};
114
115void drm_connector_ida_init(void)
116{
117 int i;
118
119 for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
120 ida_init(&drm_connector_enum_list[i].ida);
121}
122
123void drm_connector_ida_destroy(void)
124{
125 int i;
126
127 for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
128 ida_destroy(&drm_connector_enum_list[i].ida);
129}
130
131/**
132 * drm_get_connector_type_name - return a string for connector type
133 * @type: The connector type (DRM_MODE_CONNECTOR_*)
134 *
135 * Returns: the name of the connector type, or NULL if the type is not valid.
136 */
137const char *drm_get_connector_type_name(unsigned int type)
138{
139 if (type < ARRAY_SIZE(drm_connector_enum_list))
140 return drm_connector_enum_list[type].name;
141
142 return NULL;
143}
144EXPORT_SYMBOL(drm_get_connector_type_name);
145
146/**
147 * drm_connector_get_cmdline_mode - reads the user's cmdline mode
148 * @connector: connector to query
149 *
150 * The kernel supports per-connector configuration of its consoles through
151 * use of the video= parameter. This function parses that option and
152 * extracts the user's specified mode (or enable/disable status) for a
153 * particular connector. This is typically only used during the early fbdev
154 * setup.
155 */
156static void drm_connector_get_cmdline_mode(struct drm_connector *connector)
157{
158 struct drm_cmdline_mode *mode = &connector->cmdline_mode;
159 const char *option;
160
161 option = video_get_options(connector->name);
162 if (!option)
163 return;
164
165 if (!drm_mode_parse_command_line_for_connector(option,
166 connector,
167 mode))
168 return;
169
170 if (mode->force) {
171 DRM_INFO("forcing %s connector %s\n", connector->name,
172 drm_get_connector_force_name(mode->force));
173 connector->force = mode->force;
174 }
175
176 if (mode->panel_orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN) {
177 DRM_INFO("cmdline forces connector %s panel_orientation to %d\n",
178 connector->name, mode->panel_orientation);
179 drm_connector_set_panel_orientation(connector,
180 mode->panel_orientation);
181 }
182
183 DRM_DEBUG_KMS("cmdline mode for connector %s %s %dx%d@%dHz%s%s%s\n",
184 connector->name, mode->name,
185 mode->xres, mode->yres,
186 mode->refresh_specified ? mode->refresh : 60,
187 mode->rb ? " reduced blanking" : "",
188 mode->margins ? " with margins" : "",
189 mode->interlace ? " interlaced" : "");
190}
191
192static void drm_connector_free(struct kref *kref)
193{
194 struct drm_connector *connector =
195 container_of(kref, struct drm_connector, base.refcount);
196 struct drm_device *dev = connector->dev;
197
198 drm_mode_object_unregister(dev, &connector->base);
199 connector->funcs->destroy(connector);
200}
201
202void drm_connector_free_work_fn(struct work_struct *work)
203{
204 struct drm_connector *connector, *n;
205 struct drm_device *dev =
206 container_of(work, struct drm_device, mode_config.connector_free_work);
207 struct drm_mode_config *config = &dev->mode_config;
208 unsigned long flags;
209 struct llist_node *freed;
210
211 spin_lock_irqsave(&config->connector_list_lock, flags);
212 freed = llist_del_all(&config->connector_free_list);
213 spin_unlock_irqrestore(&config->connector_list_lock, flags);
214
215 llist_for_each_entry_safe(connector, n, freed, free_node) {
216 drm_mode_object_unregister(dev, &connector->base);
217 connector->funcs->destroy(connector);
218 }
219}
220
221static int __drm_connector_init(struct drm_device *dev,
222 struct drm_connector *connector,
223 const struct drm_connector_funcs *funcs,
224 int connector_type,
225 struct i2c_adapter *ddc)
226{
227 struct drm_mode_config *config = &dev->mode_config;
228 int ret;
229 struct ida *connector_ida =
230 &drm_connector_enum_list[connector_type].ida;
231
232 WARN_ON(drm_drv_uses_atomic_modeset(dev) &&
233 (!funcs->atomic_destroy_state ||
234 !funcs->atomic_duplicate_state));
235
236 ret = __drm_mode_object_add(dev, &connector->base,
237 DRM_MODE_OBJECT_CONNECTOR,
238 false, drm_connector_free);
239 if (ret)
240 return ret;
241
242 connector->base.properties = &connector->properties;
243 connector->dev = dev;
244 connector->funcs = funcs;
245
246 /* connector index is used with 32bit bitmasks */
247 ret = ida_alloc_max(&config->connector_ida, 31, GFP_KERNEL);
248 if (ret < 0) {
249 DRM_DEBUG_KMS("Failed to allocate %s connector index: %d\n",
250 drm_connector_enum_list[connector_type].name,
251 ret);
252 goto out_put;
253 }
254 connector->index = ret;
255 ret = 0;
256
257 connector->connector_type = connector_type;
258 connector->connector_type_id =
259 ida_alloc_min(connector_ida, 1, GFP_KERNEL);
260 if (connector->connector_type_id < 0) {
261 ret = connector->connector_type_id;
262 goto out_put_id;
263 }
264 connector->name =
265 kasprintf(GFP_KERNEL, "%s-%d",
266 drm_connector_enum_list[connector_type].name,
267 connector->connector_type_id);
268 if (!connector->name) {
269 ret = -ENOMEM;
270 goto out_put_type_id;
271 }
272
273 /* provide ddc symlink in sysfs */
274 connector->ddc = ddc;
275
276 INIT_LIST_HEAD(&connector->global_connector_list_entry);
277 INIT_LIST_HEAD(&connector->probed_modes);
278 INIT_LIST_HEAD(&connector->modes);
279 mutex_init(&connector->mutex);
280 mutex_init(&connector->edid_override_mutex);
281 connector->edid_blob_ptr = NULL;
282 connector->epoch_counter = 0;
283 connector->tile_blob_ptr = NULL;
284 connector->status = connector_status_unknown;
285 connector->display_info.panel_orientation =
286 DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
287
288 drm_connector_get_cmdline_mode(connector);
289
290 /* We should add connectors at the end to avoid upsetting the connector
291 * index too much.
292 */
293 spin_lock_irq(&config->connector_list_lock);
294 list_add_tail(&connector->head, &config->connector_list);
295 config->num_connector++;
296 spin_unlock_irq(&config->connector_list_lock);
297
298 if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL &&
299 connector_type != DRM_MODE_CONNECTOR_WRITEBACK)
300 drm_connector_attach_edid_property(connector);
301
302 drm_object_attach_property(&connector->base,
303 config->dpms_property, 0);
304
305 drm_object_attach_property(&connector->base,
306 config->link_status_property,
307 0);
308
309 drm_object_attach_property(&connector->base,
310 config->non_desktop_property,
311 0);
312 drm_object_attach_property(&connector->base,
313 config->tile_property,
314 0);
315
316 if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
317 drm_object_attach_property(&connector->base, config->prop_crtc_id, 0);
318 }
319
320 connector->debugfs_entry = NULL;
321out_put_type_id:
322 if (ret)
323 ida_free(connector_ida, connector->connector_type_id);
324out_put_id:
325 if (ret)
326 ida_free(&config->connector_ida, connector->index);
327out_put:
328 if (ret)
329 drm_mode_object_unregister(dev, &connector->base);
330
331 return ret;
332}
333
334/**
335 * drm_connector_init - Init a preallocated connector
336 * @dev: DRM device
337 * @connector: the connector to init
338 * @funcs: callbacks for this connector
339 * @connector_type: user visible type of the connector
340 *
341 * Initialises a preallocated connector. Connectors should be
342 * subclassed as part of driver connector objects.
343 *
344 * At driver unload time the driver's &drm_connector_funcs.destroy hook
345 * should call drm_connector_cleanup() and free the connector structure.
346 * The connector structure should not be allocated with devm_kzalloc().
347 *
348 * Note: consider using drmm_connector_init() instead of
349 * drm_connector_init() to let the DRM managed resource infrastructure
350 * take care of cleanup and deallocation.
351 *
352 * Returns:
353 * Zero on success, error code on failure.
354 */
355int drm_connector_init(struct drm_device *dev,
356 struct drm_connector *connector,
357 const struct drm_connector_funcs *funcs,
358 int connector_type)
359{
360 if (drm_WARN_ON(dev, !(funcs && funcs->destroy)))
361 return -EINVAL;
362
363 return __drm_connector_init(dev, connector, funcs, connector_type, NULL);
364}
365EXPORT_SYMBOL(drm_connector_init);
366
367/**
368 * drm_connector_init_with_ddc - Init a preallocated connector
369 * @dev: DRM device
370 * @connector: the connector to init
371 * @funcs: callbacks for this connector
372 * @connector_type: user visible type of the connector
373 * @ddc: pointer to the associated ddc adapter
374 *
375 * Initialises a preallocated connector. Connectors should be
376 * subclassed as part of driver connector objects.
377 *
378 * At driver unload time the driver's &drm_connector_funcs.destroy hook
379 * should call drm_connector_cleanup() and free the connector structure.
380 * The connector structure should not be allocated with devm_kzalloc().
381 *
382 * Ensures that the ddc field of the connector is correctly set.
383 *
384 * Note: consider using drmm_connector_init() instead of
385 * drm_connector_init_with_ddc() to let the DRM managed resource
386 * infrastructure take care of cleanup and deallocation.
387 *
388 * Returns:
389 * Zero on success, error code on failure.
390 */
391int drm_connector_init_with_ddc(struct drm_device *dev,
392 struct drm_connector *connector,
393 const struct drm_connector_funcs *funcs,
394 int connector_type,
395 struct i2c_adapter *ddc)
396{
397 if (drm_WARN_ON(dev, !(funcs && funcs->destroy)))
398 return -EINVAL;
399
400 return __drm_connector_init(dev, connector, funcs, connector_type, ddc);
401}
402EXPORT_SYMBOL(drm_connector_init_with_ddc);
403
404static void drm_connector_cleanup_action(struct drm_device *dev,
405 void *ptr)
406{
407 struct drm_connector *connector = ptr;
408
409 drm_connector_cleanup(connector);
410}
411
412/**
413 * drmm_connector_init - Init a preallocated connector
414 * @dev: DRM device
415 * @connector: the connector to init
416 * @funcs: callbacks for this connector
417 * @connector_type: user visible type of the connector
418 * @ddc: optional pointer to the associated ddc adapter
419 *
420 * Initialises a preallocated connector. Connectors should be
421 * subclassed as part of driver connector objects.
422 *
423 * Cleanup is automatically handled with a call to
424 * drm_connector_cleanup() in a DRM-managed action.
425 *
426 * The connector structure should be allocated with drmm_kzalloc().
427 *
428 * Returns:
429 * Zero on success, error code on failure.
430 */
431int drmm_connector_init(struct drm_device *dev,
432 struct drm_connector *connector,
433 const struct drm_connector_funcs *funcs,
434 int connector_type,
435 struct i2c_adapter *ddc)
436{
437 int ret;
438
439 if (drm_WARN_ON(dev, funcs && funcs->destroy))
440 return -EINVAL;
441
442 ret = __drm_connector_init(dev, connector, funcs, connector_type, ddc);
443 if (ret)
444 return ret;
445
446 ret = drmm_add_action_or_reset(dev, drm_connector_cleanup_action,
447 connector);
448 if (ret)
449 return ret;
450
451 return 0;
452}
453EXPORT_SYMBOL(drmm_connector_init);
454
455/**
456 * drm_connector_attach_edid_property - attach edid property.
457 * @connector: the connector
458 *
459 * Some connector types like DRM_MODE_CONNECTOR_VIRTUAL do not get a
460 * edid property attached by default. This function can be used to
461 * explicitly enable the edid property in these cases.
462 */
463void drm_connector_attach_edid_property(struct drm_connector *connector)
464{
465 struct drm_mode_config *config = &connector->dev->mode_config;
466
467 drm_object_attach_property(&connector->base,
468 config->edid_property,
469 0);
470}
471EXPORT_SYMBOL(drm_connector_attach_edid_property);
472
473/**
474 * drm_connector_attach_encoder - attach a connector to an encoder
475 * @connector: connector to attach
476 * @encoder: encoder to attach @connector to
477 *
478 * This function links up a connector to an encoder. Note that the routing
479 * restrictions between encoders and crtcs are exposed to userspace through the
480 * possible_clones and possible_crtcs bitmasks.
481 *
482 * Returns:
483 * Zero on success, negative errno on failure.
484 */
485int drm_connector_attach_encoder(struct drm_connector *connector,
486 struct drm_encoder *encoder)
487{
488 /*
489 * In the past, drivers have attempted to model the static association
490 * of connector to encoder in simple connector/encoder devices using a
491 * direct assignment of connector->encoder = encoder. This connection
492 * is a logical one and the responsibility of the core, so drivers are
493 * expected not to mess with this.
494 *
495 * Note that the error return should've been enough here, but a large
496 * majority of drivers ignores the return value, so add in a big WARN
497 * to get people's attention.
498 */
499 if (WARN_ON(connector->encoder))
500 return -EINVAL;
501
502 connector->possible_encoders |= drm_encoder_mask(encoder);
503
504 return 0;
505}
506EXPORT_SYMBOL(drm_connector_attach_encoder);
507
508/**
509 * drm_connector_has_possible_encoder - check if the connector and encoder are
510 * associated with each other
511 * @connector: the connector
512 * @encoder: the encoder
513 *
514 * Returns:
515 * True if @encoder is one of the possible encoders for @connector.
516 */
517bool drm_connector_has_possible_encoder(struct drm_connector *connector,
518 struct drm_encoder *encoder)
519{
520 return connector->possible_encoders & drm_encoder_mask(encoder);
521}
522EXPORT_SYMBOL(drm_connector_has_possible_encoder);
523
524static void drm_mode_remove(struct drm_connector *connector,
525 struct drm_display_mode *mode)
526{
527 list_del(&mode->head);
528 drm_mode_destroy(connector->dev, mode);
529}
530
531/**
532 * drm_connector_cleanup - cleans up an initialised connector
533 * @connector: connector to cleanup
534 *
535 * Cleans up the connector but doesn't free the object.
536 */
537void drm_connector_cleanup(struct drm_connector *connector)
538{
539 struct drm_device *dev = connector->dev;
540 struct drm_display_mode *mode, *t;
541
542 /* The connector should have been removed from userspace long before
543 * it is finally destroyed.
544 */
545 if (WARN_ON(connector->registration_state ==
546 DRM_CONNECTOR_REGISTERED))
547 drm_connector_unregister(connector);
548
549 if (connector->privacy_screen) {
550 drm_privacy_screen_put(connector->privacy_screen);
551 connector->privacy_screen = NULL;
552 }
553
554 if (connector->tile_group) {
555 drm_mode_put_tile_group(dev, connector->tile_group);
556 connector->tile_group = NULL;
557 }
558
559 list_for_each_entry_safe(mode, t, &connector->probed_modes, head)
560 drm_mode_remove(connector, mode);
561
562 list_for_each_entry_safe(mode, t, &connector->modes, head)
563 drm_mode_remove(connector, mode);
564
565 ida_free(&drm_connector_enum_list[connector->connector_type].ida,
566 connector->connector_type_id);
567
568 ida_free(&dev->mode_config.connector_ida, connector->index);
569
570 kfree(connector->display_info.bus_formats);
571 kfree(connector->display_info.vics);
572 drm_mode_object_unregister(dev, &connector->base);
573 kfree(connector->name);
574 connector->name = NULL;
575 fwnode_handle_put(connector->fwnode);
576 connector->fwnode = NULL;
577 spin_lock_irq(&dev->mode_config.connector_list_lock);
578 list_del(&connector->head);
579 dev->mode_config.num_connector--;
580 spin_unlock_irq(&dev->mode_config.connector_list_lock);
581
582 WARN_ON(connector->state && !connector->funcs->atomic_destroy_state);
583 if (connector->state && connector->funcs->atomic_destroy_state)
584 connector->funcs->atomic_destroy_state(connector,
585 connector->state);
586
587 mutex_destroy(&connector->mutex);
588
589 memset(connector, 0, sizeof(*connector));
590
591 if (dev->registered)
592 drm_sysfs_hotplug_event(dev);
593}
594EXPORT_SYMBOL(drm_connector_cleanup);
595
596/**
597 * drm_connector_register - register a connector
598 * @connector: the connector to register
599 *
600 * Register userspace interfaces for a connector. Only call this for connectors
601 * which can be hotplugged after drm_dev_register() has been called already,
602 * e.g. DP MST connectors. All other connectors will be registered automatically
603 * when calling drm_dev_register().
604 *
605 * When the connector is no longer available, callers must call
606 * drm_connector_unregister().
607 *
608 * Returns:
609 * Zero on success, error code on failure.
610 */
611int drm_connector_register(struct drm_connector *connector)
612{
613 int ret = 0;
614
615 if (!connector->dev->registered)
616 return 0;
617
618 mutex_lock(&connector->mutex);
619 if (connector->registration_state != DRM_CONNECTOR_INITIALIZING)
620 goto unlock;
621
622 ret = drm_sysfs_connector_add(connector);
623 if (ret)
624 goto unlock;
625
626 drm_debugfs_connector_add(connector);
627
628 if (connector->funcs->late_register) {
629 ret = connector->funcs->late_register(connector);
630 if (ret)
631 goto err_debugfs;
632 }
633
634 ret = drm_sysfs_connector_add_late(connector);
635 if (ret)
636 goto err_late_register;
637
638 drm_mode_object_register(connector->dev, &connector->base);
639
640 connector->registration_state = DRM_CONNECTOR_REGISTERED;
641
642 /* Let userspace know we have a new connector */
643 drm_sysfs_connector_hotplug_event(connector);
644
645 if (connector->privacy_screen)
646 drm_privacy_screen_register_notifier(connector->privacy_screen,
647 &connector->privacy_screen_notifier);
648
649 mutex_lock(&connector_list_lock);
650 list_add_tail(&connector->global_connector_list_entry, &connector_list);
651 mutex_unlock(&connector_list_lock);
652 goto unlock;
653
654err_late_register:
655 if (connector->funcs->early_unregister)
656 connector->funcs->early_unregister(connector);
657err_debugfs:
658 drm_debugfs_connector_remove(connector);
659 drm_sysfs_connector_remove(connector);
660unlock:
661 mutex_unlock(&connector->mutex);
662 return ret;
663}
664EXPORT_SYMBOL(drm_connector_register);
665
666/**
667 * drm_connector_unregister - unregister a connector
668 * @connector: the connector to unregister
669 *
670 * Unregister userspace interfaces for a connector. Only call this for
671 * connectors which have been registered explicitly by calling
672 * drm_connector_register().
673 */
674void drm_connector_unregister(struct drm_connector *connector)
675{
676 mutex_lock(&connector->mutex);
677 if (connector->registration_state != DRM_CONNECTOR_REGISTERED) {
678 mutex_unlock(&connector->mutex);
679 return;
680 }
681
682 mutex_lock(&connector_list_lock);
683 list_del_init(&connector->global_connector_list_entry);
684 mutex_unlock(&connector_list_lock);
685
686 if (connector->privacy_screen)
687 drm_privacy_screen_unregister_notifier(
688 connector->privacy_screen,
689 &connector->privacy_screen_notifier);
690
691 drm_sysfs_connector_remove_early(connector);
692
693 if (connector->funcs->early_unregister)
694 connector->funcs->early_unregister(connector);
695
696 drm_debugfs_connector_remove(connector);
697 drm_sysfs_connector_remove(connector);
698
699 connector->registration_state = DRM_CONNECTOR_UNREGISTERED;
700 mutex_unlock(&connector->mutex);
701}
702EXPORT_SYMBOL(drm_connector_unregister);
703
704void drm_connector_unregister_all(struct drm_device *dev)
705{
706 struct drm_connector *connector;
707 struct drm_connector_list_iter conn_iter;
708
709 drm_connector_list_iter_begin(dev, &conn_iter);
710 drm_for_each_connector_iter(connector, &conn_iter)
711 drm_connector_unregister(connector);
712 drm_connector_list_iter_end(&conn_iter);
713}
714
715int drm_connector_register_all(struct drm_device *dev)
716{
717 struct drm_connector *connector;
718 struct drm_connector_list_iter conn_iter;
719 int ret = 0;
720
721 drm_connector_list_iter_begin(dev, &conn_iter);
722 drm_for_each_connector_iter(connector, &conn_iter) {
723 ret = drm_connector_register(connector);
724 if (ret)
725 break;
726 }
727 drm_connector_list_iter_end(&conn_iter);
728
729 if (ret)
730 drm_connector_unregister_all(dev);
731 return ret;
732}
733
734/**
735 * drm_get_connector_status_name - return a string for connector status
736 * @status: connector status to compute name of
737 *
738 * In contrast to the other drm_get_*_name functions this one here returns a
739 * const pointer and hence is threadsafe.
740 *
741 * Returns: connector status string
742 */
743const char *drm_get_connector_status_name(enum drm_connector_status status)
744{
745 if (status == connector_status_connected)
746 return "connected";
747 else if (status == connector_status_disconnected)
748 return "disconnected";
749 else
750 return "unknown";
751}
752EXPORT_SYMBOL(drm_get_connector_status_name);
753
754/**
755 * drm_get_connector_force_name - return a string for connector force
756 * @force: connector force to get name of
757 *
758 * Returns: const pointer to name.
759 */
760const char *drm_get_connector_force_name(enum drm_connector_force force)
761{
762 switch (force) {
763 case DRM_FORCE_UNSPECIFIED:
764 return "unspecified";
765 case DRM_FORCE_OFF:
766 return "off";
767 case DRM_FORCE_ON:
768 return "on";
769 case DRM_FORCE_ON_DIGITAL:
770 return "digital";
771 default:
772 return "unknown";
773 }
774}
775
776#ifdef CONFIG_LOCKDEP
777static struct lockdep_map connector_list_iter_dep_map = {
778 .name = "drm_connector_list_iter"
779};
780#endif
781
782/**
783 * drm_connector_list_iter_begin - initialize a connector_list iterator
784 * @dev: DRM device
785 * @iter: connector_list iterator
786 *
787 * Sets @iter up to walk the &drm_mode_config.connector_list of @dev. @iter
788 * must always be cleaned up again by calling drm_connector_list_iter_end().
789 * Iteration itself happens using drm_connector_list_iter_next() or
790 * drm_for_each_connector_iter().
791 */
792void drm_connector_list_iter_begin(struct drm_device *dev,
793 struct drm_connector_list_iter *iter)
794{
795 iter->dev = dev;
796 iter->conn = NULL;
797 lock_acquire_shared_recursive(&connector_list_iter_dep_map, 0, 1, NULL, _RET_IP_);
798}
799EXPORT_SYMBOL(drm_connector_list_iter_begin);
800
801/*
802 * Extra-safe connector put function that works in any context. Should only be
803 * used from the connector_iter functions, where we never really expect to
804 * actually release the connector when dropping our final reference.
805 */
806static void
807__drm_connector_put_safe(struct drm_connector *conn)
808{
809 struct drm_mode_config *config = &conn->dev->mode_config;
810
811 lockdep_assert_held(&config->connector_list_lock);
812
813 if (!refcount_dec_and_test(&conn->base.refcount.refcount))
814 return;
815
816 llist_add(&conn->free_node, &config->connector_free_list);
817 schedule_work(&config->connector_free_work);
818}
819
820/**
821 * drm_connector_list_iter_next - return next connector
822 * @iter: connector_list iterator
823 *
824 * Returns: the next connector for @iter, or NULL when the list walk has
825 * completed.
826 */
827struct drm_connector *
828drm_connector_list_iter_next(struct drm_connector_list_iter *iter)
829{
830 struct drm_connector *old_conn = iter->conn;
831 struct drm_mode_config *config = &iter->dev->mode_config;
832 struct list_head *lhead;
833 unsigned long flags;
834
835 spin_lock_irqsave(&config->connector_list_lock, flags);
836 lhead = old_conn ? &old_conn->head : &config->connector_list;
837
838 do {
839 if (lhead->next == &config->connector_list) {
840 iter->conn = NULL;
841 break;
842 }
843
844 lhead = lhead->next;
845 iter->conn = list_entry(lhead, struct drm_connector, head);
846
847 /* loop until it's not a zombie connector */
848 } while (!kref_get_unless_zero(&iter->conn->base.refcount));
849
850 if (old_conn)
851 __drm_connector_put_safe(old_conn);
852 spin_unlock_irqrestore(&config->connector_list_lock, flags);
853
854 return iter->conn;
855}
856EXPORT_SYMBOL(drm_connector_list_iter_next);
857
858/**
859 * drm_connector_list_iter_end - tear down a connector_list iterator
860 * @iter: connector_list iterator
861 *
862 * Tears down @iter and releases any resources (like &drm_connector references)
863 * acquired while walking the list. This must always be called, both when the
864 * iteration completes fully or when it was aborted without walking the entire
865 * list.
866 */
867void drm_connector_list_iter_end(struct drm_connector_list_iter *iter)
868{
869 struct drm_mode_config *config = &iter->dev->mode_config;
870 unsigned long flags;
871
872 iter->dev = NULL;
873 if (iter->conn) {
874 spin_lock_irqsave(&config->connector_list_lock, flags);
875 __drm_connector_put_safe(iter->conn);
876 spin_unlock_irqrestore(&config->connector_list_lock, flags);
877 }
878 lock_release(&connector_list_iter_dep_map, _RET_IP_);
879}
880EXPORT_SYMBOL(drm_connector_list_iter_end);
881
882static const struct drm_prop_enum_list drm_subpixel_enum_list[] = {
883 { SubPixelUnknown, "Unknown" },
884 { SubPixelHorizontalRGB, "Horizontal RGB" },
885 { SubPixelHorizontalBGR, "Horizontal BGR" },
886 { SubPixelVerticalRGB, "Vertical RGB" },
887 { SubPixelVerticalBGR, "Vertical BGR" },
888 { SubPixelNone, "None" },
889};
890
891/**
892 * drm_get_subpixel_order_name - return a string for a given subpixel enum
893 * @order: enum of subpixel_order
894 *
895 * Note you could abuse this and return something out of bounds, but that
896 * would be a caller error. No unscrubbed user data should make it here.
897 *
898 * Returns: string describing an enumerated subpixel property
899 */
900const char *drm_get_subpixel_order_name(enum subpixel_order order)
901{
902 return drm_subpixel_enum_list[order].name;
903}
904EXPORT_SYMBOL(drm_get_subpixel_order_name);
905
906static const struct drm_prop_enum_list drm_dpms_enum_list[] = {
907 { DRM_MODE_DPMS_ON, "On" },
908 { DRM_MODE_DPMS_STANDBY, "Standby" },
909 { DRM_MODE_DPMS_SUSPEND, "Suspend" },
910 { DRM_MODE_DPMS_OFF, "Off" }
911};
912DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list)
913
914static const struct drm_prop_enum_list drm_link_status_enum_list[] = {
915 { DRM_MODE_LINK_STATUS_GOOD, "Good" },
916 { DRM_MODE_LINK_STATUS_BAD, "Bad" },
917};
918
919/**
920 * drm_display_info_set_bus_formats - set the supported bus formats
921 * @info: display info to store bus formats in
922 * @formats: array containing the supported bus formats
923 * @num_formats: the number of entries in the fmts array
924 *
925 * Store the supported bus formats in display info structure.
926 * See MEDIA_BUS_FMT_* definitions in include/uapi/linux/media-bus-format.h for
927 * a full list of available formats.
928 *
929 * Returns:
930 * 0 on success or a negative error code on failure.
931 */
932int drm_display_info_set_bus_formats(struct drm_display_info *info,
933 const u32 *formats,
934 unsigned int num_formats)
935{
936 u32 *fmts = NULL;
937
938 if (!formats && num_formats)
939 return -EINVAL;
940
941 if (formats && num_formats) {
942 fmts = kmemdup(formats, sizeof(*formats) * num_formats,
943 GFP_KERNEL);
944 if (!fmts)
945 return -ENOMEM;
946 }
947
948 kfree(info->bus_formats);
949 info->bus_formats = fmts;
950 info->num_bus_formats = num_formats;
951
952 return 0;
953}
954EXPORT_SYMBOL(drm_display_info_set_bus_formats);
955
956/* Optional connector properties. */
957static const struct drm_prop_enum_list drm_scaling_mode_enum_list[] = {
958 { DRM_MODE_SCALE_NONE, "None" },
959 { DRM_MODE_SCALE_FULLSCREEN, "Full" },
960 { DRM_MODE_SCALE_CENTER, "Center" },
961 { DRM_MODE_SCALE_ASPECT, "Full aspect" },
962};
963
964static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
965 { DRM_MODE_PICTURE_ASPECT_NONE, "Automatic" },
966 { DRM_MODE_PICTURE_ASPECT_4_3, "4:3" },
967 { DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
968};
969
970static const struct drm_prop_enum_list drm_content_type_enum_list[] = {
971 { DRM_MODE_CONTENT_TYPE_NO_DATA, "No Data" },
972 { DRM_MODE_CONTENT_TYPE_GRAPHICS, "Graphics" },
973 { DRM_MODE_CONTENT_TYPE_PHOTO, "Photo" },
974 { DRM_MODE_CONTENT_TYPE_CINEMA, "Cinema" },
975 { DRM_MODE_CONTENT_TYPE_GAME, "Game" },
976};
977
978static const struct drm_prop_enum_list drm_panel_orientation_enum_list[] = {
979 { DRM_MODE_PANEL_ORIENTATION_NORMAL, "Normal" },
980 { DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, "Upside Down" },
981 { DRM_MODE_PANEL_ORIENTATION_LEFT_UP, "Left Side Up" },
982 { DRM_MODE_PANEL_ORIENTATION_RIGHT_UP, "Right Side Up" },
983};
984
985static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
986 { DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
987 { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */
988 { DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */
989};
990DRM_ENUM_NAME_FN(drm_get_dvi_i_select_name, drm_dvi_i_select_enum_list)
991
992static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = {
993 { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I, TV-out and DP */
994 { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */
995 { DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */
996};
997DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
998 drm_dvi_i_subconnector_enum_list)
999
1000static const struct drm_prop_enum_list drm_tv_mode_enum_list[] = {
1001 { DRM_MODE_TV_MODE_NTSC, "NTSC" },
1002 { DRM_MODE_TV_MODE_NTSC_443, "NTSC-443" },
1003 { DRM_MODE_TV_MODE_NTSC_J, "NTSC-J" },
1004 { DRM_MODE_TV_MODE_PAL, "PAL" },
1005 { DRM_MODE_TV_MODE_PAL_M, "PAL-M" },
1006 { DRM_MODE_TV_MODE_PAL_N, "PAL-N" },
1007 { DRM_MODE_TV_MODE_SECAM, "SECAM" },
1008};
1009DRM_ENUM_NAME_FN(drm_get_tv_mode_name, drm_tv_mode_enum_list)
1010
1011/**
1012 * drm_get_tv_mode_from_name - Translates a TV mode name into its enum value
1013 * @name: TV Mode name we want to convert
1014 * @len: Length of @name
1015 *
1016 * Translates @name into an enum drm_connector_tv_mode.
1017 *
1018 * Returns: the enum value on success, a negative errno otherwise.
1019 */
1020int drm_get_tv_mode_from_name(const char *name, size_t len)
1021{
1022 unsigned int i;
1023
1024 for (i = 0; i < ARRAY_SIZE(drm_tv_mode_enum_list); i++) {
1025 const struct drm_prop_enum_list *item = &drm_tv_mode_enum_list[i];
1026
1027 if (strlen(item->name) == len && !strncmp(item->name, name, len))
1028 return item->type;
1029 }
1030
1031 return -EINVAL;
1032}
1033EXPORT_SYMBOL(drm_get_tv_mode_from_name);
1034
1035static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
1036 { DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
1037 { DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
1038 { DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */
1039 { DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
1040 { DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */
1041};
1042DRM_ENUM_NAME_FN(drm_get_tv_select_name, drm_tv_select_enum_list)
1043
1044static const struct drm_prop_enum_list drm_tv_subconnector_enum_list[] = {
1045 { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I, TV-out and DP */
1046 { DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
1047 { DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */
1048 { DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
1049 { DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */
1050};
1051DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
1052 drm_tv_subconnector_enum_list)
1053
1054static const struct drm_prop_enum_list drm_dp_subconnector_enum_list[] = {
1055 { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I, TV-out and DP */
1056 { DRM_MODE_SUBCONNECTOR_VGA, "VGA" }, /* DP */
1057 { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DP */
1058 { DRM_MODE_SUBCONNECTOR_HDMIA, "HDMI" }, /* DP */
1059 { DRM_MODE_SUBCONNECTOR_DisplayPort, "DP" }, /* DP */
1060 { DRM_MODE_SUBCONNECTOR_Wireless, "Wireless" }, /* DP */
1061 { DRM_MODE_SUBCONNECTOR_Native, "Native" }, /* DP */
1062};
1063
1064DRM_ENUM_NAME_FN(drm_get_dp_subconnector_name,
1065 drm_dp_subconnector_enum_list)
1066
1067
1068static const char * const colorspace_names[] = {
1069 /* For Default case, driver will set the colorspace */
1070 [DRM_MODE_COLORIMETRY_DEFAULT] = "Default",
1071 /* Standard Definition Colorimetry based on CEA 861 */
1072 [DRM_MODE_COLORIMETRY_SMPTE_170M_YCC] = "SMPTE_170M_YCC",
1073 [DRM_MODE_COLORIMETRY_BT709_YCC] = "BT709_YCC",
1074 /* Standard Definition Colorimetry based on IEC 61966-2-4 */
1075 [DRM_MODE_COLORIMETRY_XVYCC_601] = "XVYCC_601",
1076 /* High Definition Colorimetry based on IEC 61966-2-4 */
1077 [DRM_MODE_COLORIMETRY_XVYCC_709] = "XVYCC_709",
1078 /* Colorimetry based on IEC 61966-2-1/Amendment 1 */
1079 [DRM_MODE_COLORIMETRY_SYCC_601] = "SYCC_601",
1080 /* Colorimetry based on IEC 61966-2-5 [33] */
1081 [DRM_MODE_COLORIMETRY_OPYCC_601] = "opYCC_601",
1082 /* Colorimetry based on IEC 61966-2-5 */
1083 [DRM_MODE_COLORIMETRY_OPRGB] = "opRGB",
1084 /* Colorimetry based on ITU-R BT.2020 */
1085 [DRM_MODE_COLORIMETRY_BT2020_CYCC] = "BT2020_CYCC",
1086 /* Colorimetry based on ITU-R BT.2020 */
1087 [DRM_MODE_COLORIMETRY_BT2020_RGB] = "BT2020_RGB",
1088 /* Colorimetry based on ITU-R BT.2020 */
1089 [DRM_MODE_COLORIMETRY_BT2020_YCC] = "BT2020_YCC",
1090 /* Added as part of Additional Colorimetry Extension in 861.G */
1091 [DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65] = "DCI-P3_RGB_D65",
1092 [DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER] = "DCI-P3_RGB_Theater",
1093 [DRM_MODE_COLORIMETRY_RGB_WIDE_FIXED] = "RGB_WIDE_FIXED",
1094 /* Colorimetry based on scRGB (IEC 61966-2-2) */
1095 [DRM_MODE_COLORIMETRY_RGB_WIDE_FLOAT] = "RGB_WIDE_FLOAT",
1096 [DRM_MODE_COLORIMETRY_BT601_YCC] = "BT601_YCC",
1097};
1098
1099/**
1100 * drm_get_colorspace_name - return a string for color encoding
1101 * @colorspace: color space to compute name of
1102 *
1103 * In contrast to the other drm_get_*_name functions this one here returns a
1104 * const pointer and hence is threadsafe.
1105 */
1106const char *drm_get_colorspace_name(enum drm_colorspace colorspace)
1107{
1108 if (colorspace < ARRAY_SIZE(colorspace_names) && colorspace_names[colorspace])
1109 return colorspace_names[colorspace];
1110 else
1111 return "(null)";
1112}
1113
1114static const u32 hdmi_colorspaces =
1115 BIT(DRM_MODE_COLORIMETRY_SMPTE_170M_YCC) |
1116 BIT(DRM_MODE_COLORIMETRY_BT709_YCC) |
1117 BIT(DRM_MODE_COLORIMETRY_XVYCC_601) |
1118 BIT(DRM_MODE_COLORIMETRY_XVYCC_709) |
1119 BIT(DRM_MODE_COLORIMETRY_SYCC_601) |
1120 BIT(DRM_MODE_COLORIMETRY_OPYCC_601) |
1121 BIT(DRM_MODE_COLORIMETRY_OPRGB) |
1122 BIT(DRM_MODE_COLORIMETRY_BT2020_CYCC) |
1123 BIT(DRM_MODE_COLORIMETRY_BT2020_RGB) |
1124 BIT(DRM_MODE_COLORIMETRY_BT2020_YCC) |
1125 BIT(DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65) |
1126 BIT(DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER);
1127
1128/*
1129 * As per DP 1.4a spec, 2.2.5.7.5 VSC SDP Payload for Pixel Encoding/Colorimetry
1130 * Format Table 2-120
1131 */
1132static const u32 dp_colorspaces =
1133 BIT(DRM_MODE_COLORIMETRY_RGB_WIDE_FIXED) |
1134 BIT(DRM_MODE_COLORIMETRY_RGB_WIDE_FLOAT) |
1135 BIT(DRM_MODE_COLORIMETRY_OPRGB) |
1136 BIT(DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65) |
1137 BIT(DRM_MODE_COLORIMETRY_BT2020_RGB) |
1138 BIT(DRM_MODE_COLORIMETRY_BT601_YCC) |
1139 BIT(DRM_MODE_COLORIMETRY_BT709_YCC) |
1140 BIT(DRM_MODE_COLORIMETRY_XVYCC_601) |
1141 BIT(DRM_MODE_COLORIMETRY_XVYCC_709) |
1142 BIT(DRM_MODE_COLORIMETRY_SYCC_601) |
1143 BIT(DRM_MODE_COLORIMETRY_OPYCC_601) |
1144 BIT(DRM_MODE_COLORIMETRY_BT2020_CYCC) |
1145 BIT(DRM_MODE_COLORIMETRY_BT2020_YCC);
1146
1147/**
1148 * DOC: standard connector properties
1149 *
1150 * DRM connectors have a few standardized properties:
1151 *
1152 * EDID:
1153 * Blob property which contains the current EDID read from the sink. This
1154 * is useful to parse sink identification information like vendor, model
1155 * and serial. Drivers should update this property by calling
1156 * drm_connector_update_edid_property(), usually after having parsed
1157 * the EDID using drm_add_edid_modes(). Userspace cannot change this
1158 * property.
1159 *
1160 * User-space should not parse the EDID to obtain information exposed via
1161 * other KMS properties (because the kernel might apply limits, quirks or
1162 * fixups to the EDID). For instance, user-space should not try to parse
1163 * mode lists from the EDID.
1164 * DPMS:
1165 * Legacy property for setting the power state of the connector. For atomic
1166 * drivers this is only provided for backwards compatibility with existing
1167 * drivers, it remaps to controlling the "ACTIVE" property on the CRTC the
1168 * connector is linked to. Drivers should never set this property directly,
1169 * it is handled by the DRM core by calling the &drm_connector_funcs.dpms
1170 * callback. For atomic drivers the remapping to the "ACTIVE" property is
1171 * implemented in the DRM core.
1172 *
1173 * Note that this property cannot be set through the MODE_ATOMIC ioctl,
1174 * userspace must use "ACTIVE" on the CRTC instead.
1175 *
1176 * WARNING:
1177 *
1178 * For userspace also running on legacy drivers the "DPMS" semantics are a
1179 * lot more complicated. First, userspace cannot rely on the "DPMS" value
1180 * returned by the GETCONNECTOR actually reflecting reality, because many
1181 * drivers fail to update it. For atomic drivers this is taken care of in
1182 * drm_atomic_helper_update_legacy_modeset_state().
1183 *
1184 * The second issue is that the DPMS state is only well-defined when the
1185 * connector is connected to a CRTC. In atomic the DRM core enforces that
1186 * "ACTIVE" is off in such a case, no such checks exists for "DPMS".
1187 *
1188 * Finally, when enabling an output using the legacy SETCONFIG ioctl then
1189 * "DPMS" is forced to ON. But see above, that might not be reflected in
1190 * the software value on legacy drivers.
1191 *
1192 * Summarizing: Only set "DPMS" when the connector is known to be enabled,
1193 * assume that a successful SETCONFIG call also sets "DPMS" to on, and
1194 * never read back the value of "DPMS" because it can be incorrect.
1195 * PATH:
1196 * Connector path property to identify how this sink is physically
1197 * connected. Used by DP MST. This should be set by calling
1198 * drm_connector_set_path_property(), in the case of DP MST with the
1199 * path property the MST manager created. Userspace cannot change this
1200 * property.
1201 *
1202 * In the case of DP MST, the property has the format
1203 * ``mst:<parent>-<ports>`` where ``<parent>`` is the KMS object ID of the
1204 * parent connector and ``<ports>`` is a hyphen-separated list of DP MST
1205 * port numbers. Note, KMS object IDs are not guaranteed to be stable
1206 * across reboots.
1207 * TILE:
1208 * Connector tile group property to indicate how a set of DRM connector
1209 * compose together into one logical screen. This is used by both high-res
1210 * external screens (often only using a single cable, but exposing multiple
1211 * DP MST sinks), or high-res integrated panels (like dual-link DSI) which
1212 * are not gen-locked. Note that for tiled panels which are genlocked, like
1213 * dual-link LVDS or dual-link DSI, the driver should try to not expose the
1214 * tiling and virtualise both &drm_crtc and &drm_plane if needed. Drivers
1215 * should update this value using drm_connector_set_tile_property().
1216 * Userspace cannot change this property.
1217 * link-status:
1218 * Connector link-status property to indicate the status of link. The
1219 * default value of link-status is "GOOD". If something fails during or
1220 * after modeset, the kernel driver may set this to "BAD" and issue a
1221 * hotplug uevent. Drivers should update this value using
1222 * drm_connector_set_link_status_property().
1223 *
1224 * When user-space receives the hotplug uevent and detects a "BAD"
1225 * link-status, the sink doesn't receive pixels anymore (e.g. the screen
1226 * becomes completely black). The list of available modes may have
1227 * changed. User-space is expected to pick a new mode if the current one
1228 * has disappeared and perform a new modeset with link-status set to
1229 * "GOOD" to re-enable the connector.
1230 *
1231 * If multiple connectors share the same CRTC and one of them gets a "BAD"
1232 * link-status, the other are unaffected (ie. the sinks still continue to
1233 * receive pixels).
1234 *
1235 * When user-space performs an atomic commit on a connector with a "BAD"
1236 * link-status without resetting the property to "GOOD", the sink may
1237 * still not receive pixels. When user-space performs an atomic commit
1238 * which resets the link-status property to "GOOD" without the
1239 * ALLOW_MODESET flag set, it might fail because a modeset is required.
1240 *
1241 * User-space can only change link-status to "GOOD", changing it to "BAD"
1242 * is a no-op.
1243 *
1244 * For backwards compatibility with non-atomic userspace the kernel
1245 * tries to automatically set the link-status back to "GOOD" in the
1246 * SETCRTC IOCTL. This might fail if the mode is no longer valid, similar
1247 * to how it might fail if a different screen has been connected in the
1248 * interim.
1249 * non_desktop:
1250 * Indicates the output should be ignored for purposes of displaying a
1251 * standard desktop environment or console. This is most likely because
1252 * the output device is not rectilinear.
1253 * Content Protection:
1254 * This property is used by userspace to request the kernel protect future
1255 * content communicated over the link. When requested, kernel will apply
1256 * the appropriate means of protection (most often HDCP), and use the
1257 * property to tell userspace the protection is active.
1258 *
1259 * Drivers can set this up by calling
1260 * drm_connector_attach_content_protection_property() on initialization.
1261 *
1262 * The value of this property can be one of the following:
1263 *
1264 * DRM_MODE_CONTENT_PROTECTION_UNDESIRED = 0
1265 * The link is not protected, content is transmitted in the clear.
1266 * DRM_MODE_CONTENT_PROTECTION_DESIRED = 1
1267 * Userspace has requested content protection, but the link is not
1268 * currently protected. When in this state, kernel should enable
1269 * Content Protection as soon as possible.
1270 * DRM_MODE_CONTENT_PROTECTION_ENABLED = 2
1271 * Userspace has requested content protection, and the link is
1272 * protected. Only the driver can set the property to this value.
1273 * If userspace attempts to set to ENABLED, kernel will return
1274 * -EINVAL.
1275 *
1276 * A few guidelines:
1277 *
1278 * - DESIRED state should be preserved until userspace de-asserts it by
1279 * setting the property to UNDESIRED. This means ENABLED should only
1280 * transition to UNDESIRED when the user explicitly requests it.
1281 * - If the state is DESIRED, kernel should attempt to re-authenticate the
1282 * link whenever possible. This includes across disable/enable, dpms,
1283 * hotplug, downstream device changes, link status failures, etc..
1284 * - Kernel sends uevent with the connector id and property id through
1285 * @drm_hdcp_update_content_protection, upon below kernel triggered
1286 * scenarios:
1287 *
1288 * - DESIRED -> ENABLED (authentication success)
1289 * - ENABLED -> DESIRED (termination of authentication)
1290 * - Please note no uevents for userspace triggered property state changes,
1291 * which can't fail such as
1292 *
1293 * - DESIRED/ENABLED -> UNDESIRED
1294 * - UNDESIRED -> DESIRED
1295 * - Userspace is responsible for polling the property or listen to uevents
1296 * to determine when the value transitions from ENABLED to DESIRED.
1297 * This signifies the link is no longer protected and userspace should
1298 * take appropriate action (whatever that might be).
1299 *
1300 * HDCP Content Type:
1301 * This Enum property is used by the userspace to declare the content type
1302 * of the display stream, to kernel. Here display stream stands for any
1303 * display content that userspace intended to display through HDCP
1304 * encryption.
1305 *
1306 * Content Type of a stream is decided by the owner of the stream, as
1307 * "HDCP Type0" or "HDCP Type1".
1308 *
1309 * The value of the property can be one of the below:
1310 * - "HDCP Type0": DRM_MODE_HDCP_CONTENT_TYPE0 = 0
1311 * - "HDCP Type1": DRM_MODE_HDCP_CONTENT_TYPE1 = 1
1312 *
1313 * When kernel starts the HDCP authentication (see "Content Protection"
1314 * for details), it uses the content type in "HDCP Content Type"
1315 * for performing the HDCP authentication with the display sink.
1316 *
1317 * Please note in HDCP spec versions, a link can be authenticated with
1318 * HDCP 2.2 for Content Type 0/Content Type 1. Where as a link can be
1319 * authenticated with HDCP1.4 only for Content Type 0(though it is implicit
1320 * in nature. As there is no reference for Content Type in HDCP1.4).
1321 *
1322 * HDCP2.2 authentication protocol itself takes the "Content Type" as a
1323 * parameter, which is a input for the DP HDCP2.2 encryption algo.
1324 *
1325 * In case of Type 0 content protection request, kernel driver can choose
1326 * either of HDCP spec versions 1.4 and 2.2. When HDCP2.2 is used for
1327 * "HDCP Type 0", a HDCP 2.2 capable repeater in the downstream can send
1328 * that content to a HDCP 1.4 authenticated HDCP sink (Type0 link).
1329 * But if the content is classified as "HDCP Type 1", above mentioned
1330 * HDCP 2.2 repeater wont send the content to the HDCP sink as it can't
1331 * authenticate the HDCP1.4 capable sink for "HDCP Type 1".
1332 *
1333 * Please note userspace can be ignorant of the HDCP versions used by the
1334 * kernel driver to achieve the "HDCP Content Type".
1335 *
1336 * At current scenario, classifying a content as Type 1 ensures that the
1337 * content will be displayed only through the HDCP2.2 encrypted link.
1338 *
1339 * Note that the HDCP Content Type property is introduced at HDCP 2.2, and
1340 * defaults to type 0. It is only exposed by drivers supporting HDCP 2.2
1341 * (hence supporting Type 0 and Type 1). Based on how next versions of
1342 * HDCP specs are defined content Type could be used for higher versions
1343 * too.
1344 *
1345 * If content type is changed when "Content Protection" is not UNDESIRED,
1346 * then kernel will disable the HDCP and re-enable with new type in the
1347 * same atomic commit. And when "Content Protection" is ENABLED, it means
1348 * that link is HDCP authenticated and encrypted, for the transmission of
1349 * the Type of stream mentioned at "HDCP Content Type".
1350 *
1351 * HDR_OUTPUT_METADATA:
1352 * Connector property to enable userspace to send HDR Metadata to
1353 * driver. This metadata is based on the composition and blending
1354 * policies decided by user, taking into account the hardware and
1355 * sink capabilities. The driver gets this metadata and creates a
1356 * Dynamic Range and Mastering Infoframe (DRM) in case of HDMI,
1357 * SDP packet (Non-audio INFOFRAME SDP v1.3) for DP. This is then
1358 * sent to sink. This notifies the sink of the upcoming frame's Color
1359 * Encoding and Luminance parameters.
1360 *
1361 * Userspace first need to detect the HDR capabilities of sink by
1362 * reading and parsing the EDID. Details of HDR metadata for HDMI
1363 * are added in CTA 861.G spec. For DP , its defined in VESA DP
1364 * Standard v1.4. It needs to then get the metadata information
1365 * of the video/game/app content which are encoded in HDR (basically
1366 * using HDR transfer functions). With this information it needs to
1367 * decide on a blending policy and compose the relevant
1368 * layers/overlays into a common format. Once this blending is done,
1369 * userspace will be aware of the metadata of the composed frame to
1370 * be send to sink. It then uses this property to communicate this
1371 * metadata to driver which then make a Infoframe packet and sends
1372 * to sink based on the type of encoder connected.
1373 *
1374 * Userspace will be responsible to do Tone mapping operation in case:
1375 * - Some layers are HDR and others are SDR
1376 * - HDR layers luminance is not same as sink
1377 *
1378 * It will even need to do colorspace conversion and get all layers
1379 * to one common colorspace for blending. It can use either GL, Media
1380 * or display engine to get this done based on the capabilities of the
1381 * associated hardware.
1382 *
1383 * Driver expects metadata to be put in &struct hdr_output_metadata
1384 * structure from userspace. This is received as blob and stored in
1385 * &drm_connector_state.hdr_output_metadata. It parses EDID and saves the
1386 * sink metadata in &struct hdr_sink_metadata, as
1387 * &drm_connector.hdr_sink_metadata. Driver uses
1388 * drm_hdmi_infoframe_set_hdr_metadata() helper to set the HDR metadata,
1389 * hdmi_drm_infoframe_pack() to pack the infoframe as per spec, in case of
1390 * HDMI encoder.
1391 *
1392 * max bpc:
1393 * This range property is used by userspace to limit the bit depth. When
1394 * used the driver would limit the bpc in accordance with the valid range
1395 * supported by the hardware and sink. Drivers to use the function
1396 * drm_connector_attach_max_bpc_property() to create and attach the
1397 * property to the connector during initialization.
1398 *
1399 * Connectors also have one standardized atomic property:
1400 *
1401 * CRTC_ID:
1402 * Mode object ID of the &drm_crtc this connector should be connected to.
1403 *
1404 * Connectors for LCD panels may also have one standardized property:
1405 *
1406 * panel orientation:
1407 * On some devices the LCD panel is mounted in the casing in such a way
1408 * that the up/top side of the panel does not match with the top side of
1409 * the device. Userspace can use this property to check for this.
1410 * Note that input coordinates from touchscreens (input devices with
1411 * INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
1412 * coordinates, so if userspace rotates the picture to adjust for
1413 * the orientation it must also apply the same transformation to the
1414 * touchscreen input coordinates. This property is initialized by calling
1415 * drm_connector_set_panel_orientation() or
1416 * drm_connector_set_panel_orientation_with_quirk()
1417 *
1418 * scaling mode:
1419 * This property defines how a non-native mode is upscaled to the native
1420 * mode of an LCD panel:
1421 *
1422 * None:
1423 * No upscaling happens, scaling is left to the panel. Not all
1424 * drivers expose this mode.
1425 * Full:
1426 * The output is upscaled to the full resolution of the panel,
1427 * ignoring the aspect ratio.
1428 * Center:
1429 * No upscaling happens, the output is centered within the native
1430 * resolution the panel.
1431 * Full aspect:
1432 * The output is upscaled to maximize either the width or height
1433 * while retaining the aspect ratio.
1434 *
1435 * This property should be set up by calling
1436 * drm_connector_attach_scaling_mode_property(). Note that drivers
1437 * can also expose this property to external outputs, in which case they
1438 * must support "None", which should be the default (since external screens
1439 * have a built-in scaler).
1440 *
1441 * subconnector:
1442 * This property is used by DVI-I, TVout and DisplayPort to indicate different
1443 * connector subtypes. Enum values more or less match with those from main
1444 * connector types.
1445 * For DVI-I and TVout there is also a matching property "select subconnector"
1446 * allowing to switch between signal types.
1447 * DP subconnector corresponds to a downstream port.
1448 *
1449 * privacy-screen sw-state, privacy-screen hw-state:
1450 * These 2 optional properties can be used to query the state of the
1451 * electronic privacy screen that is available on some displays; and in
1452 * some cases also control the state. If a driver implements these
1453 * properties then both properties must be present.
1454 *
1455 * "privacy-screen hw-state" is read-only and reflects the actual state
1456 * of the privacy-screen, possible values: "Enabled", "Disabled,
1457 * "Enabled-locked", "Disabled-locked". The locked states indicate
1458 * that the state cannot be changed through the DRM API. E.g. there
1459 * might be devices where the firmware-setup options, or a hardware
1460 * slider-switch, offer always on / off modes.
1461 *
1462 * "privacy-screen sw-state" can be set to change the privacy-screen state
1463 * when not locked. In this case the driver must update the hw-state
1464 * property to reflect the new state on completion of the commit of the
1465 * sw-state property. Setting the sw-state property when the hw-state is
1466 * locked must be interpreted by the driver as a request to change the
1467 * state to the set state when the hw-state becomes unlocked. E.g. if
1468 * "privacy-screen hw-state" is "Enabled-locked" and the sw-state
1469 * gets set to "Disabled" followed by the user unlocking the state by
1470 * changing the slider-switch position, then the driver must set the
1471 * state to "Disabled" upon receiving the unlock event.
1472 *
1473 * In some cases the privacy-screen's actual state might change outside of
1474 * control of the DRM code. E.g. there might be a firmware handled hotkey
1475 * which toggles the actual state, or the actual state might be changed
1476 * through another userspace API such as writing /proc/acpi/ibm/lcdshadow.
1477 * In this case the driver must update both the hw-state and the sw-state
1478 * to reflect the new value, overwriting any pending state requests in the
1479 * sw-state. Any pending sw-state requests are thus discarded.
1480 *
1481 * Note that the ability for the state to change outside of control of
1482 * the DRM master process means that userspace must not cache the value
1483 * of the sw-state. Caching the sw-state value and including it in later
1484 * atomic commits may lead to overriding a state change done through e.g.
1485 * a firmware handled hotkey. Therefor userspace must not include the
1486 * privacy-screen sw-state in an atomic commit unless it wants to change
1487 * its value.
1488 *
1489 * left margin, right margin, top margin, bottom margin:
1490 * Add margins to the connector's viewport. This is typically used to
1491 * mitigate overscan on TVs.
1492 *
1493 * The value is the size in pixels of the black border which will be
1494 * added. The attached CRTC's content will be scaled to fill the whole
1495 * area inside the margin.
1496 *
1497 * The margins configuration might be sent to the sink, e.g. via HDMI AVI
1498 * InfoFrames.
1499 *
1500 * Drivers can set up these properties by calling
1501 * drm_mode_create_tv_margin_properties().
1502 */
1503
1504int drm_connector_create_standard_properties(struct drm_device *dev)
1505{
1506 struct drm_property *prop;
1507
1508 prop = drm_property_create(dev, DRM_MODE_PROP_BLOB |
1509 DRM_MODE_PROP_IMMUTABLE,
1510 "EDID", 0);
1511 if (!prop)
1512 return -ENOMEM;
1513 dev->mode_config.edid_property = prop;
1514
1515 prop = drm_property_create_enum(dev, 0,
1516 "DPMS", drm_dpms_enum_list,
1517 ARRAY_SIZE(drm_dpms_enum_list));
1518 if (!prop)
1519 return -ENOMEM;
1520 dev->mode_config.dpms_property = prop;
1521
1522 prop = drm_property_create(dev,
1523 DRM_MODE_PROP_BLOB |
1524 DRM_MODE_PROP_IMMUTABLE,
1525 "PATH", 0);
1526 if (!prop)
1527 return -ENOMEM;
1528 dev->mode_config.path_property = prop;
1529
1530 prop = drm_property_create(dev,
1531 DRM_MODE_PROP_BLOB |
1532 DRM_MODE_PROP_IMMUTABLE,
1533 "TILE", 0);
1534 if (!prop)
1535 return -ENOMEM;
1536 dev->mode_config.tile_property = prop;
1537
1538 prop = drm_property_create_enum(dev, 0, "link-status",
1539 drm_link_status_enum_list,
1540 ARRAY_SIZE(drm_link_status_enum_list));
1541 if (!prop)
1542 return -ENOMEM;
1543 dev->mode_config.link_status_property = prop;
1544
1545 prop = drm_property_create_bool(dev, DRM_MODE_PROP_IMMUTABLE, "non-desktop");
1546 if (!prop)
1547 return -ENOMEM;
1548 dev->mode_config.non_desktop_property = prop;
1549
1550 prop = drm_property_create(dev, DRM_MODE_PROP_BLOB,
1551 "HDR_OUTPUT_METADATA", 0);
1552 if (!prop)
1553 return -ENOMEM;
1554 dev->mode_config.hdr_output_metadata_property = prop;
1555
1556 return 0;
1557}
1558
1559/**
1560 * drm_mode_create_dvi_i_properties - create DVI-I specific connector properties
1561 * @dev: DRM device
1562 *
1563 * Called by a driver the first time a DVI-I connector is made.
1564 *
1565 * Returns: %0
1566 */
1567int drm_mode_create_dvi_i_properties(struct drm_device *dev)
1568{
1569 struct drm_property *dvi_i_selector;
1570 struct drm_property *dvi_i_subconnector;
1571
1572 if (dev->mode_config.dvi_i_select_subconnector_property)
1573 return 0;
1574
1575 dvi_i_selector =
1576 drm_property_create_enum(dev, 0,
1577 "select subconnector",
1578 drm_dvi_i_select_enum_list,
1579 ARRAY_SIZE(drm_dvi_i_select_enum_list));
1580 dev->mode_config.dvi_i_select_subconnector_property = dvi_i_selector;
1581
1582 dvi_i_subconnector = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
1583 "subconnector",
1584 drm_dvi_i_subconnector_enum_list,
1585 ARRAY_SIZE(drm_dvi_i_subconnector_enum_list));
1586 dev->mode_config.dvi_i_subconnector_property = dvi_i_subconnector;
1587
1588 return 0;
1589}
1590EXPORT_SYMBOL(drm_mode_create_dvi_i_properties);
1591
1592/**
1593 * drm_connector_attach_dp_subconnector_property - create subconnector property for DP
1594 * @connector: drm_connector to attach property
1595 *
1596 * Called by a driver when DP connector is created.
1597 */
1598void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector)
1599{
1600 struct drm_mode_config *mode_config = &connector->dev->mode_config;
1601
1602 if (!mode_config->dp_subconnector_property)
1603 mode_config->dp_subconnector_property =
1604 drm_property_create_enum(connector->dev,
1605 DRM_MODE_PROP_IMMUTABLE,
1606 "subconnector",
1607 drm_dp_subconnector_enum_list,
1608 ARRAY_SIZE(drm_dp_subconnector_enum_list));
1609
1610 drm_object_attach_property(&connector->base,
1611 mode_config->dp_subconnector_property,
1612 DRM_MODE_SUBCONNECTOR_Unknown);
1613}
1614EXPORT_SYMBOL(drm_connector_attach_dp_subconnector_property);
1615
1616/**
1617 * DOC: HDMI connector properties
1618 *
1619 * content type (HDMI specific):
1620 * Indicates content type setting to be used in HDMI infoframes to indicate
1621 * content type for the external device, so that it adjusts its display
1622 * settings accordingly.
1623 *
1624 * The value of this property can be one of the following:
1625 *
1626 * No Data:
1627 * Content type is unknown
1628 * Graphics:
1629 * Content type is graphics
1630 * Photo:
1631 * Content type is photo
1632 * Cinema:
1633 * Content type is cinema
1634 * Game:
1635 * Content type is game
1636 *
1637 * The meaning of each content type is defined in CTA-861-G table 15.
1638 *
1639 * Drivers can set up this property by calling
1640 * drm_connector_attach_content_type_property(). Decoding to
1641 * infoframe values is done through drm_hdmi_avi_infoframe_content_type().
1642 */
1643
1644/*
1645 * TODO: Document the properties:
1646 * - brightness
1647 * - contrast
1648 * - flicker reduction
1649 * - hue
1650 * - mode
1651 * - overscan
1652 * - saturation
1653 * - select subconnector
1654 */
1655/**
1656 * DOC: Analog TV Connector Properties
1657 *
1658 * TV Mode:
1659 * Indicates the TV Mode used on an analog TV connector. The value
1660 * of this property can be one of the following:
1661 *
1662 * NTSC:
1663 * TV Mode is CCIR System M (aka 525-lines) together with
1664 * the NTSC Color Encoding.
1665 *
1666 * NTSC-443:
1667 *
1668 * TV Mode is CCIR System M (aka 525-lines) together with
1669 * the NTSC Color Encoding, but with a color subcarrier
1670 * frequency of 4.43MHz
1671 *
1672 * NTSC-J:
1673 *
1674 * TV Mode is CCIR System M (aka 525-lines) together with
1675 * the NTSC Color Encoding, but with a black level equal to
1676 * the blanking level.
1677 *
1678 * PAL:
1679 *
1680 * TV Mode is CCIR System B (aka 625-lines) together with
1681 * the PAL Color Encoding.
1682 *
1683 * PAL-M:
1684 *
1685 * TV Mode is CCIR System M (aka 525-lines) together with
1686 * the PAL Color Encoding.
1687 *
1688 * PAL-N:
1689 *
1690 * TV Mode is CCIR System N together with the PAL Color
1691 * Encoding, a color subcarrier frequency of 3.58MHz, the
1692 * SECAM color space, and narrower channels than other PAL
1693 * variants.
1694 *
1695 * SECAM:
1696 *
1697 * TV Mode is CCIR System B (aka 625-lines) together with
1698 * the SECAM Color Encoding.
1699 *
1700 * Drivers can set up this property by calling
1701 * drm_mode_create_tv_properties().
1702 */
1703
1704/**
1705 * drm_connector_attach_content_type_property - attach content-type property
1706 * @connector: connector to attach content type property on.
1707 *
1708 * Called by a driver the first time a HDMI connector is made.
1709 *
1710 * Returns: %0
1711 */
1712int drm_connector_attach_content_type_property(struct drm_connector *connector)
1713{
1714 if (!drm_mode_create_content_type_property(connector->dev))
1715 drm_object_attach_property(&connector->base,
1716 connector->dev->mode_config.content_type_property,
1717 DRM_MODE_CONTENT_TYPE_NO_DATA);
1718 return 0;
1719}
1720EXPORT_SYMBOL(drm_connector_attach_content_type_property);
1721
1722/**
1723 * drm_connector_attach_tv_margin_properties - attach TV connector margin
1724 * properties
1725 * @connector: DRM connector
1726 *
1727 * Called by a driver when it needs to attach TV margin props to a connector.
1728 * Typically used on SDTV and HDMI connectors.
1729 */
1730void drm_connector_attach_tv_margin_properties(struct drm_connector *connector)
1731{
1732 struct drm_device *dev = connector->dev;
1733
1734 drm_object_attach_property(&connector->base,
1735 dev->mode_config.tv_left_margin_property,
1736 0);
1737 drm_object_attach_property(&connector->base,
1738 dev->mode_config.tv_right_margin_property,
1739 0);
1740 drm_object_attach_property(&connector->base,
1741 dev->mode_config.tv_top_margin_property,
1742 0);
1743 drm_object_attach_property(&connector->base,
1744 dev->mode_config.tv_bottom_margin_property,
1745 0);
1746}
1747EXPORT_SYMBOL(drm_connector_attach_tv_margin_properties);
1748
1749/**
1750 * drm_mode_create_tv_margin_properties - create TV connector margin properties
1751 * @dev: DRM device
1752 *
1753 * Called by a driver's HDMI connector initialization routine, this function
1754 * creates the TV margin properties for a given device. No need to call this
1755 * function for an SDTV connector, it's already called from
1756 * drm_mode_create_tv_properties_legacy().
1757 *
1758 * Returns:
1759 * 0 on success or a negative error code on failure.
1760 */
1761int drm_mode_create_tv_margin_properties(struct drm_device *dev)
1762{
1763 if (dev->mode_config.tv_left_margin_property)
1764 return 0;
1765
1766 dev->mode_config.tv_left_margin_property =
1767 drm_property_create_range(dev, 0, "left margin", 0, 100);
1768 if (!dev->mode_config.tv_left_margin_property)
1769 return -ENOMEM;
1770
1771 dev->mode_config.tv_right_margin_property =
1772 drm_property_create_range(dev, 0, "right margin", 0, 100);
1773 if (!dev->mode_config.tv_right_margin_property)
1774 return -ENOMEM;
1775
1776 dev->mode_config.tv_top_margin_property =
1777 drm_property_create_range(dev, 0, "top margin", 0, 100);
1778 if (!dev->mode_config.tv_top_margin_property)
1779 return -ENOMEM;
1780
1781 dev->mode_config.tv_bottom_margin_property =
1782 drm_property_create_range(dev, 0, "bottom margin", 0, 100);
1783 if (!dev->mode_config.tv_bottom_margin_property)
1784 return -ENOMEM;
1785
1786 return 0;
1787}
1788EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
1789
1790/**
1791 * drm_mode_create_tv_properties_legacy - create TV specific connector properties
1792 * @dev: DRM device
1793 * @num_modes: number of different TV formats (modes) supported
1794 * @modes: array of pointers to strings containing name of each format
1795 *
1796 * Called by a driver's TV initialization routine, this function creates
1797 * the TV specific connector properties for a given device. Caller is
1798 * responsible for allocating a list of format names and passing them to
1799 * this routine.
1800 *
1801 * NOTE: This functions registers the deprecated "mode" connector
1802 * property to select the analog TV mode (ie, NTSC, PAL, etc.). New
1803 * drivers must use drm_mode_create_tv_properties() instead.
1804 *
1805 * Returns:
1806 * 0 on success or a negative error code on failure.
1807 */
1808int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
1809 unsigned int num_modes,
1810 const char * const modes[])
1811{
1812 struct drm_property *tv_selector;
1813 struct drm_property *tv_subconnector;
1814 unsigned int i;
1815
1816 if (dev->mode_config.tv_select_subconnector_property)
1817 return 0;
1818
1819 /*
1820 * Basic connector properties
1821 */
1822 tv_selector = drm_property_create_enum(dev, 0,
1823 "select subconnector",
1824 drm_tv_select_enum_list,
1825 ARRAY_SIZE(drm_tv_select_enum_list));
1826 if (!tv_selector)
1827 goto nomem;
1828
1829 dev->mode_config.tv_select_subconnector_property = tv_selector;
1830
1831 tv_subconnector =
1832 drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
1833 "subconnector",
1834 drm_tv_subconnector_enum_list,
1835 ARRAY_SIZE(drm_tv_subconnector_enum_list));
1836 if (!tv_subconnector)
1837 goto nomem;
1838 dev->mode_config.tv_subconnector_property = tv_subconnector;
1839
1840 /*
1841 * Other, TV specific properties: margins & TV modes.
1842 */
1843 if (drm_mode_create_tv_margin_properties(dev))
1844 goto nomem;
1845
1846 if (num_modes) {
1847 dev->mode_config.legacy_tv_mode_property =
1848 drm_property_create(dev, DRM_MODE_PROP_ENUM,
1849 "mode", num_modes);
1850 if (!dev->mode_config.legacy_tv_mode_property)
1851 goto nomem;
1852
1853 for (i = 0; i < num_modes; i++)
1854 drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
1855 i, modes[i]);
1856 }
1857
1858 dev->mode_config.tv_brightness_property =
1859 drm_property_create_range(dev, 0, "brightness", 0, 100);
1860 if (!dev->mode_config.tv_brightness_property)
1861 goto nomem;
1862
1863 dev->mode_config.tv_contrast_property =
1864 drm_property_create_range(dev, 0, "contrast", 0, 100);
1865 if (!dev->mode_config.tv_contrast_property)
1866 goto nomem;
1867
1868 dev->mode_config.tv_flicker_reduction_property =
1869 drm_property_create_range(dev, 0, "flicker reduction", 0, 100);
1870 if (!dev->mode_config.tv_flicker_reduction_property)
1871 goto nomem;
1872
1873 dev->mode_config.tv_overscan_property =
1874 drm_property_create_range(dev, 0, "overscan", 0, 100);
1875 if (!dev->mode_config.tv_overscan_property)
1876 goto nomem;
1877
1878 dev->mode_config.tv_saturation_property =
1879 drm_property_create_range(dev, 0, "saturation", 0, 100);
1880 if (!dev->mode_config.tv_saturation_property)
1881 goto nomem;
1882
1883 dev->mode_config.tv_hue_property =
1884 drm_property_create_range(dev, 0, "hue", 0, 100);
1885 if (!dev->mode_config.tv_hue_property)
1886 goto nomem;
1887
1888 return 0;
1889nomem:
1890 return -ENOMEM;
1891}
1892EXPORT_SYMBOL(drm_mode_create_tv_properties_legacy);
1893
1894/**
1895 * drm_mode_create_tv_properties - create TV specific connector properties
1896 * @dev: DRM device
1897 * @supported_tv_modes: Bitmask of TV modes supported (See DRM_MODE_TV_MODE_*)
1898 *
1899 * Called by a driver's TV initialization routine, this function creates
1900 * the TV specific connector properties for a given device.
1901 *
1902 * Returns:
1903 * 0 on success or a negative error code on failure.
1904 */
1905int drm_mode_create_tv_properties(struct drm_device *dev,
1906 unsigned int supported_tv_modes)
1907{
1908 struct drm_prop_enum_list tv_mode_list[DRM_MODE_TV_MODE_MAX];
1909 struct drm_property *tv_mode;
1910 unsigned int i, len = 0;
1911
1912 if (dev->mode_config.tv_mode_property)
1913 return 0;
1914
1915 for (i = 0; i < DRM_MODE_TV_MODE_MAX; i++) {
1916 if (!(supported_tv_modes & BIT(i)))
1917 continue;
1918
1919 tv_mode_list[len].type = i;
1920 tv_mode_list[len].name = drm_get_tv_mode_name(i);
1921 len++;
1922 }
1923
1924 tv_mode = drm_property_create_enum(dev, 0, "TV mode",
1925 tv_mode_list, len);
1926 if (!tv_mode)
1927 return -ENOMEM;
1928
1929 dev->mode_config.tv_mode_property = tv_mode;
1930
1931 return drm_mode_create_tv_properties_legacy(dev, 0, NULL);
1932}
1933EXPORT_SYMBOL(drm_mode_create_tv_properties);
1934
1935/**
1936 * drm_mode_create_scaling_mode_property - create scaling mode property
1937 * @dev: DRM device
1938 *
1939 * Called by a driver the first time it's needed, must be attached to desired
1940 * connectors.
1941 *
1942 * Atomic drivers should use drm_connector_attach_scaling_mode_property()
1943 * instead to correctly assign &drm_connector_state.scaling_mode
1944 * in the atomic state.
1945 *
1946 * Returns: %0
1947 */
1948int drm_mode_create_scaling_mode_property(struct drm_device *dev)
1949{
1950 struct drm_property *scaling_mode;
1951
1952 if (dev->mode_config.scaling_mode_property)
1953 return 0;
1954
1955 scaling_mode =
1956 drm_property_create_enum(dev, 0, "scaling mode",
1957 drm_scaling_mode_enum_list,
1958 ARRAY_SIZE(drm_scaling_mode_enum_list));
1959
1960 dev->mode_config.scaling_mode_property = scaling_mode;
1961
1962 return 0;
1963}
1964EXPORT_SYMBOL(drm_mode_create_scaling_mode_property);
1965
1966/**
1967 * DOC: Variable refresh properties
1968 *
1969 * Variable refresh rate capable displays can dynamically adjust their
1970 * refresh rate by extending the duration of their vertical front porch
1971 * until page flip or timeout occurs. This can reduce or remove stuttering
1972 * and latency in scenarios where the page flip does not align with the
1973 * vblank interval.
1974 *
1975 * An example scenario would be an application flipping at a constant rate
1976 * of 48Hz on a 60Hz display. The page flip will frequently miss the vblank
1977 * interval and the same contents will be displayed twice. This can be
1978 * observed as stuttering for content with motion.
1979 *
1980 * If variable refresh rate was active on a display that supported a
1981 * variable refresh range from 35Hz to 60Hz no stuttering would be observable
1982 * for the example scenario. The minimum supported variable refresh rate of
1983 * 35Hz is below the page flip frequency and the vertical front porch can
1984 * be extended until the page flip occurs. The vblank interval will be
1985 * directly aligned to the page flip rate.
1986 *
1987 * Not all userspace content is suitable for use with variable refresh rate.
1988 * Large and frequent changes in vertical front porch duration may worsen
1989 * perceived stuttering for input sensitive applications.
1990 *
1991 * Panel brightness will also vary with vertical front porch duration. Some
1992 * panels may have noticeable differences in brightness between the minimum
1993 * vertical front porch duration and the maximum vertical front porch duration.
1994 * Large and frequent changes in vertical front porch duration may produce
1995 * observable flickering for such panels.
1996 *
1997 * Userspace control for variable refresh rate is supported via properties
1998 * on the &drm_connector and &drm_crtc objects.
1999 *
2000 * "vrr_capable":
2001 * Optional &drm_connector boolean property that drivers should attach
2002 * with drm_connector_attach_vrr_capable_property() on connectors that
2003 * could support variable refresh rates. Drivers should update the
2004 * property value by calling drm_connector_set_vrr_capable_property().
2005 *
2006 * Absence of the property should indicate absence of support.
2007 *
2008 * "VRR_ENABLED":
2009 * Default &drm_crtc boolean property that notifies the driver that the
2010 * content on the CRTC is suitable for variable refresh rate presentation.
2011 * The driver will take this property as a hint to enable variable
2012 * refresh rate support if the receiver supports it, ie. if the
2013 * "vrr_capable" property is true on the &drm_connector object. The
2014 * vertical front porch duration will be extended until page-flip or
2015 * timeout when enabled.
2016 *
2017 * The minimum vertical front porch duration is defined as the vertical
2018 * front porch duration for the current mode.
2019 *
2020 * The maximum vertical front porch duration is greater than or equal to
2021 * the minimum vertical front porch duration. The duration is derived
2022 * from the minimum supported variable refresh rate for the connector.
2023 *
2024 * The driver may place further restrictions within these minimum
2025 * and maximum bounds.
2026 */
2027
2028/**
2029 * drm_connector_attach_vrr_capable_property - creates the
2030 * vrr_capable property
2031 * @connector: connector to create the vrr_capable property on.
2032 *
2033 * This is used by atomic drivers to add support for querying
2034 * variable refresh rate capability for a connector.
2035 *
2036 * Returns:
2037 * Zero on success, negative errno on failure.
2038 */
2039int drm_connector_attach_vrr_capable_property(
2040 struct drm_connector *connector)
2041{
2042 struct drm_device *dev = connector->dev;
2043 struct drm_property *prop;
2044
2045 if (!connector->vrr_capable_property) {
2046 prop = drm_property_create_bool(dev, DRM_MODE_PROP_IMMUTABLE,
2047 "vrr_capable");
2048 if (!prop)
2049 return -ENOMEM;
2050
2051 connector->vrr_capable_property = prop;
2052 drm_object_attach_property(&connector->base, prop, 0);
2053 }
2054
2055 return 0;
2056}
2057EXPORT_SYMBOL(drm_connector_attach_vrr_capable_property);
2058
2059/**
2060 * drm_connector_attach_scaling_mode_property - attach atomic scaling mode property
2061 * @connector: connector to attach scaling mode property on.
2062 * @scaling_mode_mask: or'ed mask of BIT(%DRM_MODE_SCALE_\*).
2063 *
2064 * This is used to add support for scaling mode to atomic drivers.
2065 * The scaling mode will be set to &drm_connector_state.scaling_mode
2066 * and can be used from &drm_connector_helper_funcs->atomic_check for validation.
2067 *
2068 * This is the atomic version of drm_mode_create_scaling_mode_property().
2069 *
2070 * Returns:
2071 * Zero on success, negative errno on failure.
2072 */
2073int drm_connector_attach_scaling_mode_property(struct drm_connector *connector,
2074 u32 scaling_mode_mask)
2075{
2076 struct drm_device *dev = connector->dev;
2077 struct drm_property *scaling_mode_property;
2078 int i;
2079 const unsigned valid_scaling_mode_mask =
2080 (1U << ARRAY_SIZE(drm_scaling_mode_enum_list)) - 1;
2081
2082 if (WARN_ON(hweight32(scaling_mode_mask) < 2 ||
2083 scaling_mode_mask & ~valid_scaling_mode_mask))
2084 return -EINVAL;
2085
2086 scaling_mode_property =
2087 drm_property_create(dev, DRM_MODE_PROP_ENUM, "scaling mode",
2088 hweight32(scaling_mode_mask));
2089
2090 if (!scaling_mode_property)
2091 return -ENOMEM;
2092
2093 for (i = 0; i < ARRAY_SIZE(drm_scaling_mode_enum_list); i++) {
2094 int ret;
2095
2096 if (!(BIT(i) & scaling_mode_mask))
2097 continue;
2098
2099 ret = drm_property_add_enum(scaling_mode_property,
2100 drm_scaling_mode_enum_list[i].type,
2101 drm_scaling_mode_enum_list[i].name);
2102
2103 if (ret) {
2104 drm_property_destroy(dev, scaling_mode_property);
2105
2106 return ret;
2107 }
2108 }
2109
2110 drm_object_attach_property(&connector->base,
2111 scaling_mode_property, 0);
2112
2113 connector->scaling_mode_property = scaling_mode_property;
2114
2115 return 0;
2116}
2117EXPORT_SYMBOL(drm_connector_attach_scaling_mode_property);
2118
2119/**
2120 * drm_mode_create_aspect_ratio_property - create aspect ratio property
2121 * @dev: DRM device
2122 *
2123 * Called by a driver the first time it's needed, must be attached to desired
2124 * connectors.
2125 *
2126 * Returns:
2127 * Zero on success, negative errno on failure.
2128 */
2129int drm_mode_create_aspect_ratio_property(struct drm_device *dev)
2130{
2131 if (dev->mode_config.aspect_ratio_property)
2132 return 0;
2133
2134 dev->mode_config.aspect_ratio_property =
2135 drm_property_create_enum(dev, 0, "aspect ratio",
2136 drm_aspect_ratio_enum_list,
2137 ARRAY_SIZE(drm_aspect_ratio_enum_list));
2138
2139 if (dev->mode_config.aspect_ratio_property == NULL)
2140 return -ENOMEM;
2141
2142 return 0;
2143}
2144EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property);
2145
2146/**
2147 * DOC: standard connector properties
2148 *
2149 * Colorspace:
2150 * This property helps select a suitable colorspace based on the sink
2151 * capability. Modern sink devices support wider gamut like BT2020.
2152 * This helps switch to BT2020 mode if the BT2020 encoded video stream
2153 * is being played by the user, same for any other colorspace. Thereby
2154 * giving a good visual experience to users.
2155 *
2156 * The expectation from userspace is that it should parse the EDID
2157 * and get supported colorspaces. Use this property and switch to the
2158 * one supported. Sink supported colorspaces should be retrieved by
2159 * userspace from EDID and driver will not explicitly expose them.
2160 *
2161 * Basically the expectation from userspace is:
2162 * - Set up CRTC DEGAMMA/CTM/GAMMA to convert to some sink
2163 * colorspace
2164 * - Set this new property to let the sink know what it
2165 * converted the CRTC output to.
2166 * - This property is just to inform sink what colorspace
2167 * source is trying to drive.
2168 *
2169 * Because between HDMI and DP have different colorspaces,
2170 * drm_mode_create_hdmi_colorspace_property() is used for HDMI connector and
2171 * drm_mode_create_dp_colorspace_property() is used for DP connector.
2172 */
2173
2174static int drm_mode_create_colorspace_property(struct drm_connector *connector,
2175 u32 supported_colorspaces)
2176{
2177 struct drm_device *dev = connector->dev;
2178 u32 colorspaces = supported_colorspaces | BIT(DRM_MODE_COLORIMETRY_DEFAULT);
2179 struct drm_prop_enum_list enum_list[DRM_MODE_COLORIMETRY_COUNT];
2180 int i, len;
2181
2182 if (connector->colorspace_property)
2183 return 0;
2184
2185 if (!supported_colorspaces) {
2186 drm_err(dev, "No supported colorspaces provded on [CONNECTOR:%d:%s]\n",
2187 connector->base.id, connector->name);
2188 return -EINVAL;
2189 }
2190
2191 if ((supported_colorspaces & -BIT(DRM_MODE_COLORIMETRY_COUNT)) != 0) {
2192 drm_err(dev, "Unknown colorspace provded on [CONNECTOR:%d:%s]\n",
2193 connector->base.id, connector->name);
2194 return -EINVAL;
2195 }
2196
2197 len = 0;
2198 for (i = 0; i < DRM_MODE_COLORIMETRY_COUNT; i++) {
2199 if ((colorspaces & BIT(i)) == 0)
2200 continue;
2201
2202 enum_list[len].type = i;
2203 enum_list[len].name = colorspace_names[i];
2204 len++;
2205 }
2206
2207 connector->colorspace_property =
2208 drm_property_create_enum(dev, DRM_MODE_PROP_ENUM, "Colorspace",
2209 enum_list,
2210 len);
2211
2212 if (!connector->colorspace_property)
2213 return -ENOMEM;
2214
2215 return 0;
2216}
2217
2218/**
2219 * drm_mode_create_hdmi_colorspace_property - create hdmi colorspace property
2220 * @connector: connector to create the Colorspace property on.
2221 * @supported_colorspaces: bitmap of supported color spaces
2222 *
2223 * Called by a driver the first time it's needed, must be attached to desired
2224 * HDMI connectors.
2225 *
2226 * Returns:
2227 * Zero on success, negative errno on failure.
2228 */
2229int drm_mode_create_hdmi_colorspace_property(struct drm_connector *connector,
2230 u32 supported_colorspaces)
2231{
2232 u32 colorspaces;
2233
2234 if (supported_colorspaces)
2235 colorspaces = supported_colorspaces & hdmi_colorspaces;
2236 else
2237 colorspaces = hdmi_colorspaces;
2238
2239 return drm_mode_create_colorspace_property(connector, colorspaces);
2240}
2241EXPORT_SYMBOL(drm_mode_create_hdmi_colorspace_property);
2242
2243/**
2244 * drm_mode_create_dp_colorspace_property - create dp colorspace property
2245 * @connector: connector to create the Colorspace property on.
2246 * @supported_colorspaces: bitmap of supported color spaces
2247 *
2248 * Called by a driver the first time it's needed, must be attached to desired
2249 * DP connectors.
2250 *
2251 * Returns:
2252 * Zero on success, negative errno on failure.
2253 */
2254int drm_mode_create_dp_colorspace_property(struct drm_connector *connector,
2255 u32 supported_colorspaces)
2256{
2257 u32 colorspaces;
2258
2259 if (supported_colorspaces)
2260 colorspaces = supported_colorspaces & dp_colorspaces;
2261 else
2262 colorspaces = dp_colorspaces;
2263
2264 return drm_mode_create_colorspace_property(connector, colorspaces);
2265}
2266EXPORT_SYMBOL(drm_mode_create_dp_colorspace_property);
2267
2268/**
2269 * drm_mode_create_content_type_property - create content type property
2270 * @dev: DRM device
2271 *
2272 * Called by a driver the first time it's needed, must be attached to desired
2273 * connectors.
2274 *
2275 * Returns:
2276 * Zero on success, negative errno on failure.
2277 */
2278int drm_mode_create_content_type_property(struct drm_device *dev)
2279{
2280 if (dev->mode_config.content_type_property)
2281 return 0;
2282
2283 dev->mode_config.content_type_property =
2284 drm_property_create_enum(dev, 0, "content type",
2285 drm_content_type_enum_list,
2286 ARRAY_SIZE(drm_content_type_enum_list));
2287
2288 if (dev->mode_config.content_type_property == NULL)
2289 return -ENOMEM;
2290
2291 return 0;
2292}
2293EXPORT_SYMBOL(drm_mode_create_content_type_property);
2294
2295/**
2296 * drm_mode_create_suggested_offset_properties - create suggests offset properties
2297 * @dev: DRM device
2298 *
2299 * Create the suggested x/y offset property for connectors.
2300 *
2301 * Returns:
2302 * 0 on success or a negative error code on failure.
2303 */
2304int drm_mode_create_suggested_offset_properties(struct drm_device *dev)
2305{
2306 if (dev->mode_config.suggested_x_property && dev->mode_config.suggested_y_property)
2307 return 0;
2308
2309 dev->mode_config.suggested_x_property =
2310 drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested X", 0, 0xffffffff);
2311
2312 dev->mode_config.suggested_y_property =
2313 drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested Y", 0, 0xffffffff);
2314
2315 if (dev->mode_config.suggested_x_property == NULL ||
2316 dev->mode_config.suggested_y_property == NULL)
2317 return -ENOMEM;
2318 return 0;
2319}
2320EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties);
2321
2322/**
2323 * drm_connector_set_path_property - set tile property on connector
2324 * @connector: connector to set property on.
2325 * @path: path to use for property; must not be NULL.
2326 *
2327 * This creates a property to expose to userspace to specify a
2328 * connector path. This is mainly used for DisplayPort MST where
2329 * connectors have a topology and we want to allow userspace to give
2330 * them more meaningful names.
2331 *
2332 * Returns:
2333 * Zero on success, negative errno on failure.
2334 */
2335int drm_connector_set_path_property(struct drm_connector *connector,
2336 const char *path)
2337{
2338 struct drm_device *dev = connector->dev;
2339 int ret;
2340
2341 ret = drm_property_replace_global_blob(dev,
2342 &connector->path_blob_ptr,
2343 strlen(path) + 1,
2344 path,
2345 &connector->base,
2346 dev->mode_config.path_property);
2347 return ret;
2348}
2349EXPORT_SYMBOL(drm_connector_set_path_property);
2350
2351/**
2352 * drm_connector_set_tile_property - set tile property on connector
2353 * @connector: connector to set property on.
2354 *
2355 * This looks up the tile information for a connector, and creates a
2356 * property for userspace to parse if it exists. The property is of
2357 * the form of 8 integers using ':' as a separator.
2358 * This is used for dual port tiled displays with DisplayPort SST
2359 * or DisplayPort MST connectors.
2360 *
2361 * Returns:
2362 * Zero on success, errno on failure.
2363 */
2364int drm_connector_set_tile_property(struct drm_connector *connector)
2365{
2366 struct drm_device *dev = connector->dev;
2367 char tile[256];
2368 int ret;
2369
2370 if (!connector->has_tile) {
2371 ret = drm_property_replace_global_blob(dev,
2372 &connector->tile_blob_ptr,
2373 0,
2374 NULL,
2375 &connector->base,
2376 dev->mode_config.tile_property);
2377 return ret;
2378 }
2379
2380 snprintf(tile, 256, "%d:%d:%d:%d:%d:%d:%d:%d",
2381 connector->tile_group->id, connector->tile_is_single_monitor,
2382 connector->num_h_tile, connector->num_v_tile,
2383 connector->tile_h_loc, connector->tile_v_loc,
2384 connector->tile_h_size, connector->tile_v_size);
2385
2386 ret = drm_property_replace_global_blob(dev,
2387 &connector->tile_blob_ptr,
2388 strlen(tile) + 1,
2389 tile,
2390 &connector->base,
2391 dev->mode_config.tile_property);
2392 return ret;
2393}
2394EXPORT_SYMBOL(drm_connector_set_tile_property);
2395
2396/**
2397 * drm_connector_set_link_status_property - Set link status property of a connector
2398 * @connector: drm connector
2399 * @link_status: new value of link status property (0: Good, 1: Bad)
2400 *
2401 * In usual working scenario, this link status property will always be set to
2402 * "GOOD". If something fails during or after a mode set, the kernel driver
2403 * may set this link status property to "BAD". The caller then needs to send a
2404 * hotplug uevent for userspace to re-check the valid modes through
2405 * GET_CONNECTOR_IOCTL and retry modeset.
2406 *
2407 * Note: Drivers cannot rely on userspace to support this property and
2408 * issue a modeset. As such, they may choose to handle issues (like
2409 * re-training a link) without userspace's intervention.
2410 *
2411 * The reason for adding this property is to handle link training failures, but
2412 * it is not limited to DP or link training. For example, if we implement
2413 * asynchronous setcrtc, this property can be used to report any failures in that.
2414 */
2415void drm_connector_set_link_status_property(struct drm_connector *connector,
2416 uint64_t link_status)
2417{
2418 struct drm_device *dev = connector->dev;
2419
2420 drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
2421 connector->state->link_status = link_status;
2422 drm_modeset_unlock(&dev->mode_config.connection_mutex);
2423}
2424EXPORT_SYMBOL(drm_connector_set_link_status_property);
2425
2426/**
2427 * drm_connector_attach_max_bpc_property - attach "max bpc" property
2428 * @connector: connector to attach max bpc property on.
2429 * @min: The minimum bit depth supported by the connector.
2430 * @max: The maximum bit depth supported by the connector.
2431 *
2432 * This is used to add support for limiting the bit depth on a connector.
2433 *
2434 * Returns:
2435 * Zero on success, negative errno on failure.
2436 */
2437int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
2438 int min, int max)
2439{
2440 struct drm_device *dev = connector->dev;
2441 struct drm_property *prop;
2442
2443 prop = connector->max_bpc_property;
2444 if (!prop) {
2445 prop = drm_property_create_range(dev, 0, "max bpc", min, max);
2446 if (!prop)
2447 return -ENOMEM;
2448
2449 connector->max_bpc_property = prop;
2450 }
2451
2452 drm_object_attach_property(&connector->base, prop, max);
2453 connector->state->max_requested_bpc = max;
2454 connector->state->max_bpc = max;
2455
2456 return 0;
2457}
2458EXPORT_SYMBOL(drm_connector_attach_max_bpc_property);
2459
2460/**
2461 * drm_connector_attach_hdr_output_metadata_property - attach "HDR_OUTPUT_METADA" property
2462 * @connector: connector to attach the property on.
2463 *
2464 * This is used to allow the userspace to send HDR Metadata to the
2465 * driver.
2466 *
2467 * Returns:
2468 * Zero on success, negative errno on failure.
2469 */
2470int drm_connector_attach_hdr_output_metadata_property(struct drm_connector *connector)
2471{
2472 struct drm_device *dev = connector->dev;
2473 struct drm_property *prop = dev->mode_config.hdr_output_metadata_property;
2474
2475 drm_object_attach_property(&connector->base, prop, 0);
2476
2477 return 0;
2478}
2479EXPORT_SYMBOL(drm_connector_attach_hdr_output_metadata_property);
2480
2481/**
2482 * drm_connector_attach_colorspace_property - attach "Colorspace" property
2483 * @connector: connector to attach the property on.
2484 *
2485 * This is used to allow the userspace to signal the output colorspace
2486 * to the driver.
2487 *
2488 * Returns:
2489 * Zero on success, negative errno on failure.
2490 */
2491int drm_connector_attach_colorspace_property(struct drm_connector *connector)
2492{
2493 struct drm_property *prop = connector->colorspace_property;
2494
2495 drm_object_attach_property(&connector->base, prop, DRM_MODE_COLORIMETRY_DEFAULT);
2496
2497 return 0;
2498}
2499EXPORT_SYMBOL(drm_connector_attach_colorspace_property);
2500
2501/**
2502 * drm_connector_atomic_hdr_metadata_equal - checks if the hdr metadata changed
2503 * @old_state: old connector state to compare
2504 * @new_state: new connector state to compare
2505 *
2506 * This is used by HDR-enabled drivers to test whether the HDR metadata
2507 * have changed between two different connector state (and thus probably
2508 * requires a full blown mode change).
2509 *
2510 * Returns:
2511 * True if the metadata are equal, False otherwise
2512 */
2513bool drm_connector_atomic_hdr_metadata_equal(struct drm_connector_state *old_state,
2514 struct drm_connector_state *new_state)
2515{
2516 struct drm_property_blob *old_blob = old_state->hdr_output_metadata;
2517 struct drm_property_blob *new_blob = new_state->hdr_output_metadata;
2518
2519 if (!old_blob || !new_blob)
2520 return old_blob == new_blob;
2521
2522 if (old_blob->length != new_blob->length)
2523 return false;
2524
2525 return !memcmp(old_blob->data, new_blob->data, old_blob->length);
2526}
2527EXPORT_SYMBOL(drm_connector_atomic_hdr_metadata_equal);
2528
2529/**
2530 * drm_connector_set_vrr_capable_property - sets the variable refresh rate
2531 * capable property for a connector
2532 * @connector: drm connector
2533 * @capable: True if the connector is variable refresh rate capable
2534 *
2535 * Should be used by atomic drivers to update the indicated support for
2536 * variable refresh rate over a connector.
2537 */
2538void drm_connector_set_vrr_capable_property(
2539 struct drm_connector *connector, bool capable)
2540{
2541 if (!connector->vrr_capable_property)
2542 return;
2543
2544 drm_object_property_set_value(&connector->base,
2545 connector->vrr_capable_property,
2546 capable);
2547}
2548EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
2549
2550/**
2551 * drm_connector_set_panel_orientation - sets the connector's panel_orientation
2552 * @connector: connector for which to set the panel-orientation property.
2553 * @panel_orientation: drm_panel_orientation value to set
2554 *
2555 * This function sets the connector's panel_orientation and attaches
2556 * a "panel orientation" property to the connector.
2557 *
2558 * Calling this function on a connector where the panel_orientation has
2559 * already been set is a no-op (e.g. the orientation has been overridden with
2560 * a kernel commandline option).
2561 *
2562 * It is allowed to call this function with a panel_orientation of
2563 * DRM_MODE_PANEL_ORIENTATION_UNKNOWN, in which case it is a no-op.
2564 *
2565 * The function shouldn't be called in panel after drm is registered (i.e.
2566 * drm_dev_register() is called in drm).
2567 *
2568 * Returns:
2569 * Zero on success, negative errno on failure.
2570 */
2571int drm_connector_set_panel_orientation(
2572 struct drm_connector *connector,
2573 enum drm_panel_orientation panel_orientation)
2574{
2575 struct drm_device *dev = connector->dev;
2576 struct drm_display_info *info = &connector->display_info;
2577 struct drm_property *prop;
2578
2579 /* Already set? */
2580 if (info->panel_orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
2581 return 0;
2582
2583 /* Don't attach the property if the orientation is unknown */
2584 if (panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
2585 return 0;
2586
2587 info->panel_orientation = panel_orientation;
2588
2589 prop = dev->mode_config.panel_orientation_property;
2590 if (!prop) {
2591 prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
2592 "panel orientation",
2593 drm_panel_orientation_enum_list,
2594 ARRAY_SIZE(drm_panel_orientation_enum_list));
2595 if (!prop)
2596 return -ENOMEM;
2597
2598 dev->mode_config.panel_orientation_property = prop;
2599 }
2600
2601 drm_object_attach_property(&connector->base, prop,
2602 info->panel_orientation);
2603 return 0;
2604}
2605EXPORT_SYMBOL(drm_connector_set_panel_orientation);
2606
2607/**
2608 * drm_connector_set_panel_orientation_with_quirk - set the
2609 * connector's panel_orientation after checking for quirks
2610 * @connector: connector for which to init the panel-orientation property.
2611 * @panel_orientation: drm_panel_orientation value to set
2612 * @width: width in pixels of the panel, used for panel quirk detection
2613 * @height: height in pixels of the panel, used for panel quirk detection
2614 *
2615 * Like drm_connector_set_panel_orientation(), but with a check for platform
2616 * specific (e.g. DMI based) quirks overriding the passed in panel_orientation.
2617 *
2618 * Returns:
2619 * Zero on success, negative errno on failure.
2620 */
2621int drm_connector_set_panel_orientation_with_quirk(
2622 struct drm_connector *connector,
2623 enum drm_panel_orientation panel_orientation,
2624 int width, int height)
2625{
2626 int orientation_quirk;
2627
2628 orientation_quirk = drm_get_panel_orientation_quirk(width, height);
2629 if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
2630 panel_orientation = orientation_quirk;
2631
2632 return drm_connector_set_panel_orientation(connector,
2633 panel_orientation);
2634}
2635EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk);
2636
2637/**
2638 * drm_connector_set_orientation_from_panel -
2639 * set the connector's panel_orientation from panel's callback.
2640 * @connector: connector for which to init the panel-orientation property.
2641 * @panel: panel that can provide orientation information.
2642 *
2643 * Drm drivers should call this function before drm_dev_register().
2644 * Orientation is obtained from panel's .get_orientation() callback.
2645 *
2646 * Returns:
2647 * Zero on success, negative errno on failure.
2648 */
2649int drm_connector_set_orientation_from_panel(
2650 struct drm_connector *connector,
2651 struct drm_panel *panel)
2652{
2653 enum drm_panel_orientation orientation;
2654
2655 if (panel && panel->funcs && panel->funcs->get_orientation)
2656 orientation = panel->funcs->get_orientation(panel);
2657 else
2658 orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
2659
2660 return drm_connector_set_panel_orientation(connector, orientation);
2661}
2662EXPORT_SYMBOL(drm_connector_set_orientation_from_panel);
2663
2664static const struct drm_prop_enum_list privacy_screen_enum[] = {
2665 { PRIVACY_SCREEN_DISABLED, "Disabled" },
2666 { PRIVACY_SCREEN_ENABLED, "Enabled" },
2667 { PRIVACY_SCREEN_DISABLED_LOCKED, "Disabled-locked" },
2668 { PRIVACY_SCREEN_ENABLED_LOCKED, "Enabled-locked" },
2669};
2670
2671/**
2672 * drm_connector_create_privacy_screen_properties - create the drm connecter's
2673 * privacy-screen properties.
2674 * @connector: connector for which to create the privacy-screen properties
2675 *
2676 * This function creates the "privacy-screen sw-state" and "privacy-screen
2677 * hw-state" properties for the connector. They are not attached.
2678 */
2679void
2680drm_connector_create_privacy_screen_properties(struct drm_connector *connector)
2681{
2682 if (connector->privacy_screen_sw_state_property)
2683 return;
2684
2685 /* Note sw-state only supports the first 2 values of the enum */
2686 connector->privacy_screen_sw_state_property =
2687 drm_property_create_enum(connector->dev, DRM_MODE_PROP_ENUM,
2688 "privacy-screen sw-state",
2689 privacy_screen_enum, 2);
2690
2691 connector->privacy_screen_hw_state_property =
2692 drm_property_create_enum(connector->dev,
2693 DRM_MODE_PROP_IMMUTABLE | DRM_MODE_PROP_ENUM,
2694 "privacy-screen hw-state",
2695 privacy_screen_enum,
2696 ARRAY_SIZE(privacy_screen_enum));
2697}
2698EXPORT_SYMBOL(drm_connector_create_privacy_screen_properties);
2699
2700/**
2701 * drm_connector_attach_privacy_screen_properties - attach the drm connecter's
2702 * privacy-screen properties.
2703 * @connector: connector on which to attach the privacy-screen properties
2704 *
2705 * This function attaches the "privacy-screen sw-state" and "privacy-screen
2706 * hw-state" properties to the connector. The initial state of both is set
2707 * to "Disabled".
2708 */
2709void
2710drm_connector_attach_privacy_screen_properties(struct drm_connector *connector)
2711{
2712 if (!connector->privacy_screen_sw_state_property)
2713 return;
2714
2715 drm_object_attach_property(&connector->base,
2716 connector->privacy_screen_sw_state_property,
2717 PRIVACY_SCREEN_DISABLED);
2718
2719 drm_object_attach_property(&connector->base,
2720 connector->privacy_screen_hw_state_property,
2721 PRIVACY_SCREEN_DISABLED);
2722}
2723EXPORT_SYMBOL(drm_connector_attach_privacy_screen_properties);
2724
2725static void drm_connector_update_privacy_screen_properties(
2726 struct drm_connector *connector, bool set_sw_state)
2727{
2728 enum drm_privacy_screen_status sw_state, hw_state;
2729
2730 drm_privacy_screen_get_state(connector->privacy_screen,
2731 &sw_state, &hw_state);
2732
2733 if (set_sw_state)
2734 connector->state->privacy_screen_sw_state = sw_state;
2735 drm_object_property_set_value(&connector->base,
2736 connector->privacy_screen_hw_state_property, hw_state);
2737}
2738
2739static int drm_connector_privacy_screen_notifier(
2740 struct notifier_block *nb, unsigned long action, void *data)
2741{
2742 struct drm_connector *connector =
2743 container_of(nb, struct drm_connector, privacy_screen_notifier);
2744 struct drm_device *dev = connector->dev;
2745
2746 drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
2747 drm_connector_update_privacy_screen_properties(connector, true);
2748 drm_modeset_unlock(&dev->mode_config.connection_mutex);
2749
2750 drm_sysfs_connector_property_event(connector,
2751 connector->privacy_screen_sw_state_property);
2752 drm_sysfs_connector_property_event(connector,
2753 connector->privacy_screen_hw_state_property);
2754
2755 return NOTIFY_DONE;
2756}
2757
2758/**
2759 * drm_connector_attach_privacy_screen_provider - attach a privacy-screen to
2760 * the connector
2761 * @connector: connector to attach the privacy-screen to
2762 * @priv: drm_privacy_screen to attach
2763 *
2764 * Create and attach the standard privacy-screen properties and register
2765 * a generic notifier for generating sysfs-connector-status-events
2766 * on external changes to the privacy-screen status.
2767 * This function takes ownership of the passed in drm_privacy_screen and will
2768 * call drm_privacy_screen_put() on it when the connector is destroyed.
2769 */
2770void drm_connector_attach_privacy_screen_provider(
2771 struct drm_connector *connector, struct drm_privacy_screen *priv)
2772{
2773 connector->privacy_screen = priv;
2774 connector->privacy_screen_notifier.notifier_call =
2775 drm_connector_privacy_screen_notifier;
2776
2777 drm_connector_create_privacy_screen_properties(connector);
2778 drm_connector_update_privacy_screen_properties(connector, true);
2779 drm_connector_attach_privacy_screen_properties(connector);
2780}
2781EXPORT_SYMBOL(drm_connector_attach_privacy_screen_provider);
2782
2783/**
2784 * drm_connector_update_privacy_screen - update connector's privacy-screen sw-state
2785 * @connector_state: connector-state to update the privacy-screen for
2786 *
2787 * This function calls drm_privacy_screen_set_sw_state() on the connector's
2788 * privacy-screen.
2789 *
2790 * If the connector has no privacy-screen, then this is a no-op.
2791 */
2792void drm_connector_update_privacy_screen(const struct drm_connector_state *connector_state)
2793{
2794 struct drm_connector *connector = connector_state->connector;
2795 int ret;
2796
2797 if (!connector->privacy_screen)
2798 return;
2799
2800 ret = drm_privacy_screen_set_sw_state(connector->privacy_screen,
2801 connector_state->privacy_screen_sw_state);
2802 if (ret) {
2803 drm_err(connector->dev, "Error updating privacy-screen sw_state\n");
2804 return;
2805 }
2806
2807 /* The hw_state property value may have changed, update it. */
2808 drm_connector_update_privacy_screen_properties(connector, false);
2809}
2810EXPORT_SYMBOL(drm_connector_update_privacy_screen);
2811
2812int drm_connector_set_obj_prop(struct drm_mode_object *obj,
2813 struct drm_property *property,
2814 uint64_t value)
2815{
2816 int ret = -EINVAL;
2817 struct drm_connector *connector = obj_to_connector(obj);
2818
2819 /* Do DPMS ourselves */
2820 if (property == connector->dev->mode_config.dpms_property) {
2821 ret = (*connector->funcs->dpms)(connector, (int)value);
2822 } else if (connector->funcs->set_property)
2823 ret = connector->funcs->set_property(connector, property, value);
2824
2825 if (!ret)
2826 drm_object_property_set_value(&connector->base, property, value);
2827 return ret;
2828}
2829
2830int drm_connector_property_set_ioctl(struct drm_device *dev,
2831 void *data, struct drm_file *file_priv)
2832{
2833 struct drm_mode_connector_set_property *conn_set_prop = data;
2834 struct drm_mode_obj_set_property obj_set_prop = {
2835 .value = conn_set_prop->value,
2836 .prop_id = conn_set_prop->prop_id,
2837 .obj_id = conn_set_prop->connector_id,
2838 .obj_type = DRM_MODE_OBJECT_CONNECTOR
2839 };
2840
2841 /* It does all the locking and checking we need */
2842 return drm_mode_obj_set_property_ioctl(dev, &obj_set_prop, file_priv);
2843}
2844
2845static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *connector)
2846{
2847 /* For atomic drivers only state objects are synchronously updated and
2848 * protected by modeset locks, so check those first.
2849 */
2850 if (connector->state)
2851 return connector->state->best_encoder;
2852 return connector->encoder;
2853}
2854
2855static bool
2856drm_mode_expose_to_userspace(const struct drm_display_mode *mode,
2857 const struct list_head *modes,
2858 const struct drm_file *file_priv)
2859{
2860 /*
2861 * If user-space hasn't configured the driver to expose the stereo 3D
2862 * modes, don't expose them.
2863 */
2864 if (!file_priv->stereo_allowed && drm_mode_is_stereo(mode))
2865 return false;
2866 /*
2867 * If user-space hasn't configured the driver to expose the modes
2868 * with aspect-ratio, don't expose them. However if such a mode
2869 * is unique, let it be exposed, but reset the aspect-ratio flags
2870 * while preparing the list of user-modes.
2871 */
2872 if (!file_priv->aspect_ratio_allowed) {
2873 const struct drm_display_mode *mode_itr;
2874
2875 list_for_each_entry(mode_itr, modes, head) {
2876 if (mode_itr->expose_to_userspace &&
2877 drm_mode_match(mode_itr, mode,
2878 DRM_MODE_MATCH_TIMINGS |
2879 DRM_MODE_MATCH_CLOCK |
2880 DRM_MODE_MATCH_FLAGS |
2881 DRM_MODE_MATCH_3D_FLAGS))
2882 return false;
2883 }
2884 }
2885
2886 return true;
2887}
2888
2889int drm_mode_getconnector(struct drm_device *dev, void *data,
2890 struct drm_file *file_priv)
2891{
2892 struct drm_mode_get_connector *out_resp = data;
2893 struct drm_connector *connector;
2894 struct drm_encoder *encoder;
2895 struct drm_display_mode *mode;
2896 int mode_count = 0;
2897 int encoders_count = 0;
2898 int ret = 0;
2899 int copied = 0;
2900 struct drm_mode_modeinfo u_mode;
2901 struct drm_mode_modeinfo __user *mode_ptr;
2902 uint32_t __user *encoder_ptr;
2903 bool is_current_master;
2904
2905 if (!drm_core_check_feature(dev, DRIVER_MODESET))
2906 return -EOPNOTSUPP;
2907
2908 memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo));
2909
2910 connector = drm_connector_lookup(dev, file_priv, out_resp->connector_id);
2911 if (!connector)
2912 return -ENOENT;
2913
2914 encoders_count = hweight32(connector->possible_encoders);
2915
2916 if ((out_resp->count_encoders >= encoders_count) && encoders_count) {
2917 copied = 0;
2918 encoder_ptr = (uint32_t __user *)(unsigned long)(out_resp->encoders_ptr);
2919
2920 drm_connector_for_each_possible_encoder(connector, encoder) {
2921 if (put_user(encoder->base.id, encoder_ptr + copied)) {
2922 ret = -EFAULT;
2923 goto out;
2924 }
2925 copied++;
2926 }
2927 }
2928 out_resp->count_encoders = encoders_count;
2929
2930 out_resp->connector_id = connector->base.id;
2931 out_resp->connector_type = connector->connector_type;
2932 out_resp->connector_type_id = connector->connector_type_id;
2933
2934 is_current_master = drm_is_current_master(file_priv);
2935
2936 mutex_lock(&dev->mode_config.mutex);
2937 if (out_resp->count_modes == 0) {
2938 if (is_current_master)
2939 connector->funcs->fill_modes(connector,
2940 dev->mode_config.max_width,
2941 dev->mode_config.max_height);
2942 else
2943 drm_dbg_kms(dev, "User-space requested a forced probe on [CONNECTOR:%d:%s] but is not the DRM master, demoting to read-only probe\n",
2944 connector->base.id, connector->name);
2945 }
2946
2947 out_resp->mm_width = connector->display_info.width_mm;
2948 out_resp->mm_height = connector->display_info.height_mm;
2949 out_resp->subpixel = connector->display_info.subpixel_order;
2950 out_resp->connection = connector->status;
2951
2952 /* delayed so we get modes regardless of pre-fill_modes state */
2953 list_for_each_entry(mode, &connector->modes, head) {
2954 WARN_ON(mode->expose_to_userspace);
2955
2956 if (drm_mode_expose_to_userspace(mode, &connector->modes,
2957 file_priv)) {
2958 mode->expose_to_userspace = true;
2959 mode_count++;
2960 }
2961 }
2962
2963 /*
2964 * This ioctl is called twice, once to determine how much space is
2965 * needed, and the 2nd time to fill it.
2966 */
2967 if ((out_resp->count_modes >= mode_count) && mode_count) {
2968 copied = 0;
2969 mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long)out_resp->modes_ptr;
2970 list_for_each_entry(mode, &connector->modes, head) {
2971 if (!mode->expose_to_userspace)
2972 continue;
2973
2974 /* Clear the tag for the next time around */
2975 mode->expose_to_userspace = false;
2976
2977 drm_mode_convert_to_umode(&u_mode, mode);
2978 /*
2979 * Reset aspect ratio flags of user-mode, if modes with
2980 * aspect-ratio are not supported.
2981 */
2982 if (!file_priv->aspect_ratio_allowed)
2983 u_mode.flags &= ~DRM_MODE_FLAG_PIC_AR_MASK;
2984 if (copy_to_user(mode_ptr + copied,
2985 &u_mode, sizeof(u_mode))) {
2986 ret = -EFAULT;
2987
2988 /*
2989 * Clear the tag for the rest of
2990 * the modes for the next time around.
2991 */
2992 list_for_each_entry_continue(mode, &connector->modes, head)
2993 mode->expose_to_userspace = false;
2994
2995 mutex_unlock(&dev->mode_config.mutex);
2996
2997 goto out;
2998 }
2999 copied++;
3000 }
3001 } else {
3002 /* Clear the tag for the next time around */
3003 list_for_each_entry(mode, &connector->modes, head)
3004 mode->expose_to_userspace = false;
3005 }
3006
3007 out_resp->count_modes = mode_count;
3008 mutex_unlock(&dev->mode_config.mutex);
3009
3010 drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
3011 encoder = drm_connector_get_encoder(connector);
3012 if (encoder)
3013 out_resp->encoder_id = encoder->base.id;
3014 else
3015 out_resp->encoder_id = 0;
3016
3017 /* Only grab properties after probing, to make sure EDID and other
3018 * properties reflect the latest status.
3019 */
3020 ret = drm_mode_object_get_properties(&connector->base, file_priv->atomic,
3021 (uint32_t __user *)(unsigned long)(out_resp->props_ptr),
3022 (uint64_t __user *)(unsigned long)(out_resp->prop_values_ptr),
3023 &out_resp->count_props);
3024 drm_modeset_unlock(&dev->mode_config.connection_mutex);
3025
3026out:
3027 drm_connector_put(connector);
3028
3029 return ret;
3030}
3031
3032/**
3033 * drm_connector_find_by_fwnode - Find a connector based on the associated fwnode
3034 * @fwnode: fwnode for which to find the matching drm_connector
3035 *
3036 * This functions looks up a drm_connector based on its associated fwnode. When
3037 * a connector is found a reference to the connector is returned. The caller must
3038 * call drm_connector_put() to release this reference when it is done with the
3039 * connector.
3040 *
3041 * Returns: A reference to the found connector or an ERR_PTR().
3042 */
3043struct drm_connector *drm_connector_find_by_fwnode(struct fwnode_handle *fwnode)
3044{
3045 struct drm_connector *connector, *found = ERR_PTR(-ENODEV);
3046
3047 if (!fwnode)
3048 return ERR_PTR(-ENODEV);
3049
3050 mutex_lock(&connector_list_lock);
3051
3052 list_for_each_entry(connector, &connector_list, global_connector_list_entry) {
3053 if (connector->fwnode == fwnode ||
3054 (connector->fwnode && connector->fwnode->secondary == fwnode)) {
3055 drm_connector_get(connector);
3056 found = connector;
3057 break;
3058 }
3059 }
3060
3061 mutex_unlock(&connector_list_lock);
3062
3063 return found;
3064}
3065
3066/**
3067 * drm_connector_oob_hotplug_event - Report out-of-band hotplug event to connector
3068 * @connector_fwnode: fwnode_handle to report the event on
3069 * @status: hot plug detect logical state
3070 *
3071 * On some hardware a hotplug event notification may come from outside the display
3072 * driver / device. An example of this is some USB Type-C setups where the hardware
3073 * muxes the DisplayPort data and aux-lines but does not pass the altmode HPD
3074 * status bit to the GPU's DP HPD pin.
3075 *
3076 * This function can be used to report these out-of-band events after obtaining
3077 * a drm_connector reference through calling drm_connector_find_by_fwnode().
3078 */
3079void drm_connector_oob_hotplug_event(struct fwnode_handle *connector_fwnode,
3080 enum drm_connector_status status)
3081{
3082 struct drm_connector *connector;
3083
3084 connector = drm_connector_find_by_fwnode(connector_fwnode);
3085 if (IS_ERR(connector))
3086 return;
3087
3088 if (connector->funcs->oob_hotplug_event)
3089 connector->funcs->oob_hotplug_event(connector, status);
3090
3091 drm_connector_put(connector);
3092}
3093EXPORT_SYMBOL(drm_connector_oob_hotplug_event);
3094
3095
3096/**
3097 * DOC: Tile group
3098 *
3099 * Tile groups are used to represent tiled monitors with a unique integer
3100 * identifier. Tiled monitors using DisplayID v1.3 have a unique 8-byte handle,
3101 * we store this in a tile group, so we have a common identifier for all tiles
3102 * in a monitor group. The property is called "TILE". Drivers can manage tile
3103 * groups using drm_mode_create_tile_group(), drm_mode_put_tile_group() and
3104 * drm_mode_get_tile_group(). But this is only needed for internal panels where
3105 * the tile group information is exposed through a non-standard way.
3106 */
3107
3108static void drm_tile_group_free(struct kref *kref)
3109{
3110 struct drm_tile_group *tg = container_of(kref, struct drm_tile_group, refcount);
3111 struct drm_device *dev = tg->dev;
3112
3113 mutex_lock(&dev->mode_config.idr_mutex);
3114 idr_remove(&dev->mode_config.tile_idr, tg->id);
3115 mutex_unlock(&dev->mode_config.idr_mutex);
3116 kfree(tg);
3117}
3118
3119/**
3120 * drm_mode_put_tile_group - drop a reference to a tile group.
3121 * @dev: DRM device
3122 * @tg: tile group to drop reference to.
3123 *
3124 * drop reference to tile group and free if 0.
3125 */
3126void drm_mode_put_tile_group(struct drm_device *dev,
3127 struct drm_tile_group *tg)
3128{
3129 kref_put(&tg->refcount, drm_tile_group_free);
3130}
3131EXPORT_SYMBOL(drm_mode_put_tile_group);
3132
3133/**
3134 * drm_mode_get_tile_group - get a reference to an existing tile group
3135 * @dev: DRM device
3136 * @topology: 8-bytes unique per monitor.
3137 *
3138 * Use the unique bytes to get a reference to an existing tile group.
3139 *
3140 * RETURNS:
3141 * tile group or NULL if not found.
3142 */
3143struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev,
3144 const char topology[8])
3145{
3146 struct drm_tile_group *tg;
3147 int id;
3148
3149 mutex_lock(&dev->mode_config.idr_mutex);
3150 idr_for_each_entry(&dev->mode_config.tile_idr, tg, id) {
3151 if (!memcmp(tg->group_data, topology, 8)) {
3152 if (!kref_get_unless_zero(&tg->refcount))
3153 tg = NULL;
3154 mutex_unlock(&dev->mode_config.idr_mutex);
3155 return tg;
3156 }
3157 }
3158 mutex_unlock(&dev->mode_config.idr_mutex);
3159 return NULL;
3160}
3161EXPORT_SYMBOL(drm_mode_get_tile_group);
3162
3163/**
3164 * drm_mode_create_tile_group - create a tile group from a displayid description
3165 * @dev: DRM device
3166 * @topology: 8-bytes unique per monitor.
3167 *
3168 * Create a tile group for the unique monitor, and get a unique
3169 * identifier for the tile group.
3170 *
3171 * RETURNS:
3172 * new tile group or NULL.
3173 */
3174struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
3175 const char topology[8])
3176{
3177 struct drm_tile_group *tg;
3178 int ret;
3179
3180 tg = kzalloc(sizeof(*tg), GFP_KERNEL);
3181 if (!tg)
3182 return NULL;
3183
3184 kref_init(&tg->refcount);
3185 memcpy(tg->group_data, topology, 8);
3186 tg->dev = dev;
3187
3188 mutex_lock(&dev->mode_config.idr_mutex);
3189 ret = idr_alloc(&dev->mode_config.tile_idr, tg, 1, 0, GFP_KERNEL);
3190 if (ret >= 0) {
3191 tg->id = ret;
3192 } else {
3193 kfree(tg);
3194 tg = NULL;
3195 }
3196
3197 mutex_unlock(&dev->mode_config.idr_mutex);
3198 return tg;
3199}
3200EXPORT_SYMBOL(drm_mode_create_tile_group);