Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Ralink MT7620A SoC PCI support
4 *
5 * Copyright (C) 2007-2013 Bruce Chang (Mediatek)
6 * Copyright (C) 2013-2016 John Crispin <john@phrozen.org>
7 */
8
9#include <linux/types.h>
10#include <linux/pci.h>
11#include <linux/io.h>
12#include <linux/init.h>
13#include <linux/delay.h>
14#include <linux/interrupt.h>
15#include <linux/of.h>
16#include <linux/of_irq.h>
17#include <linux/of_pci.h>
18#include <linux/reset.h>
19#include <linux/platform_device.h>
20
21#include <asm/mach-ralink/ralink_regs.h>
22#include <asm/mach-ralink/mt7620.h>
23
24#define RALINK_PCI_IO_MAP_BASE 0x10160000
25#define RALINK_PCI_MEMORY_BASE 0x0
26
27#define RALINK_INT_PCIE0 4
28
29#define RALINK_CLKCFG1 0x30
30#define RALINK_GPIOMODE 0x60
31
32#define PPLL_CFG1 0x9c
33
34#define PPLL_DRV 0xa0
35#define PDRV_SW_SET BIT(31)
36#define LC_CKDRVPD BIT(19)
37#define LC_CKDRVOHZ BIT(18)
38#define LC_CKDRVHZ BIT(17)
39#define LC_CKTEST BIT(16)
40
41/* PCI Bridge registers */
42#define RALINK_PCI_PCICFG_ADDR 0x00
43#define PCIRST BIT(1)
44
45#define RALINK_PCI_PCIENA 0x0C
46#define PCIINT2 BIT(20)
47
48#define RALINK_PCI_CONFIG_ADDR 0x20
49#define RALINK_PCI_CONFIG_DATA_VIRT_REG 0x24
50#define RALINK_PCI_MEMBASE 0x28
51#define RALINK_PCI_IOBASE 0x2C
52
53/* PCI RC registers */
54#define RALINK_PCI0_BAR0SETUP_ADDR 0x10
55#define RALINK_PCI0_IMBASEBAR0_ADDR 0x18
56#define RALINK_PCI0_ID 0x30
57#define RALINK_PCI0_CLASS 0x34
58#define RALINK_PCI0_SUBID 0x38
59#define RALINK_PCI0_STATUS 0x50
60#define PCIE_LINK_UP_ST BIT(0)
61
62#define PCIEPHY0_CFG 0x90
63
64#define RALINK_PCIEPHY_P0_CTL_OFFSET 0x7498
65#define RALINK_PCIE0_CLK_EN BIT(26)
66
67#define BUSY 0x80000000
68#define WAITRETRY_MAX 10
69#define WRITE_MODE (1UL << 23)
70#define DATA_SHIFT 0
71#define ADDR_SHIFT 8
72
73
74static void __iomem *bridge_base;
75static void __iomem *pcie_base;
76
77static struct reset_control *rstpcie0;
78
79static inline void bridge_w32(u32 val, unsigned reg)
80{
81 iowrite32(val, bridge_base + reg);
82}
83
84static inline u32 bridge_r32(unsigned reg)
85{
86 return ioread32(bridge_base + reg);
87}
88
89static inline void pcie_w32(u32 val, unsigned reg)
90{
91 iowrite32(val, pcie_base + reg);
92}
93
94static inline u32 pcie_r32(unsigned reg)
95{
96 return ioread32(pcie_base + reg);
97}
98
99static inline void pcie_m32(u32 clr, u32 set, unsigned reg)
100{
101 u32 val = pcie_r32(reg);
102
103 val &= ~clr;
104 val |= set;
105 pcie_w32(val, reg);
106}
107
108static int wait_pciephy_busy(void)
109{
110 unsigned long reg_value = 0x0, retry = 0;
111
112 while (1) {
113 reg_value = pcie_r32(PCIEPHY0_CFG);
114
115 if (reg_value & BUSY)
116 mdelay(100);
117 else
118 break;
119 if (retry++ > WAITRETRY_MAX) {
120 pr_warn("PCIE-PHY retry failed.\n");
121 return -1;
122 }
123 }
124 return 0;
125}
126
127static void pcie_phy(unsigned long addr, unsigned long val)
128{
129 wait_pciephy_busy();
130 pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT),
131 PCIEPHY0_CFG);
132 mdelay(1);
133 wait_pciephy_busy();
134}
135
136static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
137 int size, u32 *val)
138{
139 unsigned int slot = PCI_SLOT(devfn);
140 u8 func = PCI_FUNC(devfn);
141 u32 address;
142 u32 data;
143 u32 num = 0;
144
145 if (bus)
146 num = bus->number;
147
148 address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) |
149 (func << 8) | (where & 0xfc) | 0x80000000;
150 bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
151 data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG);
152
153 switch (size) {
154 case 1:
155 *val = (data >> ((where & 3) << 3)) & 0xff;
156 break;
157 case 2:
158 *val = (data >> ((where & 3) << 3)) & 0xffff;
159 break;
160 case 4:
161 *val = data;
162 break;
163 }
164
165 return PCIBIOS_SUCCESSFUL;
166}
167
168static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
169 int size, u32 val)
170{
171 unsigned int slot = PCI_SLOT(devfn);
172 u8 func = PCI_FUNC(devfn);
173 u32 address;
174 u32 data;
175 u32 num = 0;
176
177 if (bus)
178 num = bus->number;
179
180 address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) |
181 (func << 8) | (where & 0xfc) | 0x80000000;
182 bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
183 data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG);
184
185 switch (size) {
186 case 1:
187 data = (data & ~(0xff << ((where & 3) << 3))) |
188 (val << ((where & 3) << 3));
189 break;
190 case 2:
191 data = (data & ~(0xffff << ((where & 3) << 3))) |
192 (val << ((where & 3) << 3));
193 break;
194 case 4:
195 data = val;
196 break;
197 }
198
199 bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRT_REG);
200
201 return PCIBIOS_SUCCESSFUL;
202}
203
204struct pci_ops mt7620_pci_ops = {
205 .read = pci_config_read,
206 .write = pci_config_write,
207};
208
209static struct resource mt7620_res_pci_mem1;
210static struct resource mt7620_res_pci_io1;
211struct pci_controller mt7620_controller = {
212 .pci_ops = &mt7620_pci_ops,
213 .mem_resource = &mt7620_res_pci_mem1,
214 .mem_offset = 0x00000000UL,
215 .io_resource = &mt7620_res_pci_io1,
216 .io_offset = 0x00000000UL,
217 .io_map_base = 0xa0000000,
218};
219
220static int mt7620_pci_hw_init(struct platform_device *pdev)
221{
222 /* bypass PCIe DLL */
223 pcie_phy(0x0, 0x80);
224 pcie_phy(0x1, 0x04);
225
226 /* Elastic buffer control */
227 pcie_phy(0x68, 0xB4);
228
229 /* put core into reset */
230 pcie_m32(0, PCIRST, RALINK_PCI_PCICFG_ADDR);
231 reset_control_assert(rstpcie0);
232
233 /* disable power and all clocks */
234 rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
235 rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV);
236
237 /* bring core out of reset */
238 reset_control_deassert(rstpcie0);
239 rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
240 mdelay(100);
241
242 if (!(rt_sysc_r32(PPLL_CFG1) & PDRV_SW_SET)) {
243 dev_err(&pdev->dev, "MT7620 PPLL unlock\n");
244 reset_control_assert(rstpcie0);
245 rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
246 return -1;
247 }
248
249 /* power up the bus */
250 rt_sysc_m32(LC_CKDRVHZ | LC_CKDRVOHZ, LC_CKDRVPD | PDRV_SW_SET,
251 PPLL_DRV);
252
253 return 0;
254}
255
256static int mt7628_pci_hw_init(struct platform_device *pdev)
257{
258 u32 val = 0;
259
260 /* bring the core out of reset */
261 rt_sysc_m32(BIT(16), 0, RALINK_GPIOMODE);
262 reset_control_deassert(rstpcie0);
263
264 /* enable the pci clk */
265 rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
266 mdelay(100);
267
268 /* voodoo from the SDK driver */
269 pcie_m32(~0xff, 0x5, RALINK_PCIEPHY_P0_CTL_OFFSET);
270
271 pci_config_read(NULL, 0, 0x70c, 4, &val);
272 val &= ~(0xff) << 8;
273 val |= 0x50 << 8;
274 pci_config_write(NULL, 0, 0x70c, 4, val);
275
276 pci_config_read(NULL, 0, 0x70c, 4, &val);
277 dev_err(&pdev->dev, "Port 0 N_FTS = %x\n", (unsigned int) val);
278
279 return 0;
280}
281
282static int mt7620_pci_probe(struct platform_device *pdev)
283{
284 struct resource *bridge_res = platform_get_resource(pdev,
285 IORESOURCE_MEM, 0);
286 struct resource *pcie_res = platform_get_resource(pdev,
287 IORESOURCE_MEM, 1);
288 u32 val = 0;
289
290 rstpcie0 = devm_reset_control_get_exclusive(&pdev->dev, "pcie0");
291 if (IS_ERR(rstpcie0))
292 return PTR_ERR(rstpcie0);
293
294 bridge_base = devm_ioremap_resource(&pdev->dev, bridge_res);
295 if (IS_ERR(bridge_base))
296 return PTR_ERR(bridge_base);
297
298 pcie_base = devm_ioremap_resource(&pdev->dev, pcie_res);
299 if (IS_ERR(pcie_base))
300 return PTR_ERR(pcie_base);
301
302 iomem_resource.start = 0;
303 iomem_resource.end = ~0;
304 ioport_resource.start = 0;
305 ioport_resource.end = ~0;
306
307 /* bring up the pci core */
308 switch (ralink_soc) {
309 case MT762X_SOC_MT7620A:
310 if (mt7620_pci_hw_init(pdev))
311 return -1;
312 break;
313
314 case MT762X_SOC_MT7628AN:
315 case MT762X_SOC_MT7688:
316 if (mt7628_pci_hw_init(pdev))
317 return -1;
318 break;
319
320 default:
321 dev_err(&pdev->dev, "pcie is not supported on this hardware\n");
322 return -1;
323 }
324 mdelay(50);
325
326 /* enable write access */
327 pcie_m32(PCIRST, 0, RALINK_PCI_PCICFG_ADDR);
328 mdelay(100);
329
330 /* check if there is a card present */
331 if ((pcie_r32(RALINK_PCI0_STATUS) & PCIE_LINK_UP_ST) == 0) {
332 reset_control_assert(rstpcie0);
333 rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
334 if (ralink_soc == MT762X_SOC_MT7620A)
335 rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV);
336 dev_err(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n");
337 return -1;
338 }
339
340 /* setup ranges */
341 bridge_w32(0xffffffff, RALINK_PCI_MEMBASE);
342 bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE);
343
344 pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR);
345 pcie_w32(RALINK_PCI_MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR);
346 pcie_w32(0x06040001, RALINK_PCI0_CLASS);
347
348 /* enable interrupts */
349 pcie_m32(0, PCIINT2, RALINK_PCI_PCIENA);
350
351 /* voodoo from the SDK driver */
352 pci_config_read(NULL, 0, 4, 4, &val);
353 pci_config_write(NULL, 0, 4, 4, val | 0x7);
354
355 pci_load_of_ranges(&mt7620_controller, pdev->dev.of_node);
356 register_pci_controller(&mt7620_controller);
357
358 return 0;
359}
360
361int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
362{
363 u16 cmd;
364 u32 val;
365 int irq = 0;
366
367 if ((dev->bus->number == 0) && (slot == 0)) {
368 pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR);
369 pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4,
370 RALINK_PCI_MEMORY_BASE);
371 pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val);
372 } else if ((dev->bus->number == 1) && (slot == 0x0)) {
373 irq = RALINK_INT_PCIE0;
374 } else {
375 dev_err(&dev->dev, "no irq found - bus=0x%x, slot = 0x%x\n",
376 dev->bus->number, slot);
377 return 0;
378 }
379 dev_err(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n",
380 dev->bus->number, slot, irq);
381
382 /* configure the cache line size to 0x14 */
383 pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14);
384
385 /* configure latency timer to 0xff */
386 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xff);
387 pci_read_config_word(dev, PCI_COMMAND, &cmd);
388
389 /* setup the slot */
390 cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
391 pci_write_config_word(dev, PCI_COMMAND, cmd);
392 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
393
394 return irq;
395}
396
397int pcibios_plat_dev_init(struct pci_dev *dev)
398{
399 return 0;
400}
401
402static const struct of_device_id mt7620_pci_ids[] = {
403 { .compatible = "mediatek,mt7620-pci" },
404 {},
405};
406
407static struct platform_driver mt7620_pci_driver = {
408 .probe = mt7620_pci_probe,
409 .driver = {
410 .name = "mt7620-pci",
411 .of_match_table = of_match_ptr(mt7620_pci_ids),
412 },
413};
414
415static int __init mt7620_pci_init(void)
416{
417 return platform_driver_register(&mt7620_pci_driver);
418}
419
420arch_initcall(mt7620_pci_init);
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Ralink MT7620A SoC PCI support
4 *
5 * Copyright (C) 2007-2013 Bruce Chang (Mediatek)
6 * Copyright (C) 2013-2016 John Crispin <john@phrozen.org>
7 */
8
9#include <linux/types.h>
10#include <linux/pci.h>
11#include <linux/io.h>
12#include <linux/init.h>
13#include <linux/delay.h>
14#include <linux/interrupt.h>
15#include <linux/of.h>
16#include <linux/of_irq.h>
17#include <linux/of_pci.h>
18#include <linux/reset.h>
19#include <linux/platform_device.h>
20
21#include <asm/mach-ralink/ralink_regs.h>
22#include <asm/mach-ralink/mt7620.h>
23
24#define RALINK_PCI_IO_MAP_BASE 0x10160000
25#define RALINK_PCI_MEMORY_BASE 0x0
26
27#define RALINK_INT_PCIE0 4
28
29#define RALINK_CLKCFG1 0x30
30#define RALINK_GPIOMODE 0x60
31
32#define PPLL_CFG1 0x9c
33#define PPLL_LD BIT(23)
34
35#define PPLL_DRV 0xa0
36#define PDRV_SW_SET BIT(31)
37#define LC_CKDRVPD BIT(19)
38#define LC_CKDRVOHZ BIT(18)
39#define LC_CKDRVHZ BIT(17)
40#define LC_CKTEST BIT(16)
41
42/* PCI Bridge registers */
43#define RALINK_PCI_PCICFG_ADDR 0x00
44#define PCIRST BIT(1)
45
46#define RALINK_PCI_PCIENA 0x0C
47#define PCIINT2 BIT(20)
48
49#define RALINK_PCI_CONFIG_ADDR 0x20
50#define RALINK_PCI_CONFIG_DATA_VIRT_REG 0x24
51#define RALINK_PCI_MEMBASE 0x28
52#define RALINK_PCI_IOBASE 0x2C
53
54/* PCI RC registers */
55#define RALINK_PCI0_BAR0SETUP_ADDR 0x10
56#define RALINK_PCI0_IMBASEBAR0_ADDR 0x18
57#define RALINK_PCI0_ID 0x30
58#define RALINK_PCI0_CLASS 0x34
59#define RALINK_PCI0_SUBID 0x38
60#define RALINK_PCI0_STATUS 0x50
61#define PCIE_LINK_UP_ST BIT(0)
62
63#define PCIEPHY0_CFG 0x90
64
65#define RALINK_PCIEPHY_P0_CTL_OFFSET 0x7498
66#define RALINK_PCIE0_CLK_EN BIT(26)
67
68#define BUSY 0x80000000
69#define WAITRETRY_MAX 10
70#define WRITE_MODE (1UL << 23)
71#define DATA_SHIFT 0
72#define ADDR_SHIFT 8
73
74
75static void __iomem *bridge_base;
76static void __iomem *pcie_base;
77
78static struct reset_control *rstpcie0;
79
80static inline void bridge_w32(u32 val, unsigned reg)
81{
82 iowrite32(val, bridge_base + reg);
83}
84
85static inline u32 bridge_r32(unsigned reg)
86{
87 return ioread32(bridge_base + reg);
88}
89
90static inline void pcie_w32(u32 val, unsigned reg)
91{
92 iowrite32(val, pcie_base + reg);
93}
94
95static inline u32 pcie_r32(unsigned reg)
96{
97 return ioread32(pcie_base + reg);
98}
99
100static inline void pcie_m32(u32 clr, u32 set, unsigned reg)
101{
102 u32 val = pcie_r32(reg);
103
104 val &= ~clr;
105 val |= set;
106 pcie_w32(val, reg);
107}
108
109static int wait_pciephy_busy(void)
110{
111 unsigned long reg_value = 0x0, retry = 0;
112
113 while (1) {
114 reg_value = pcie_r32(PCIEPHY0_CFG);
115
116 if (reg_value & BUSY)
117 mdelay(100);
118 else
119 break;
120 if (retry++ > WAITRETRY_MAX) {
121 pr_warn("PCIE-PHY retry failed.\n");
122 return -1;
123 }
124 }
125 return 0;
126}
127
128static void pcie_phy(unsigned long addr, unsigned long val)
129{
130 wait_pciephy_busy();
131 pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT),
132 PCIEPHY0_CFG);
133 mdelay(1);
134 wait_pciephy_busy();
135}
136
137static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
138 int size, u32 *val)
139{
140 unsigned int slot = PCI_SLOT(devfn);
141 u8 func = PCI_FUNC(devfn);
142 u32 address;
143 u32 data;
144 u32 num = 0;
145
146 if (bus)
147 num = bus->number;
148
149 address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) |
150 (func << 8) | (where & 0xfc) | 0x80000000;
151 bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
152 data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG);
153
154 switch (size) {
155 case 1:
156 *val = (data >> ((where & 3) << 3)) & 0xff;
157 break;
158 case 2:
159 *val = (data >> ((where & 3) << 3)) & 0xffff;
160 break;
161 case 4:
162 *val = data;
163 break;
164 }
165
166 return PCIBIOS_SUCCESSFUL;
167}
168
169static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
170 int size, u32 val)
171{
172 unsigned int slot = PCI_SLOT(devfn);
173 u8 func = PCI_FUNC(devfn);
174 u32 address;
175 u32 data;
176 u32 num = 0;
177
178 if (bus)
179 num = bus->number;
180
181 address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) |
182 (func << 8) | (where & 0xfc) | 0x80000000;
183 bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
184 data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG);
185
186 switch (size) {
187 case 1:
188 data = (data & ~(0xff << ((where & 3) << 3))) |
189 (val << ((where & 3) << 3));
190 break;
191 case 2:
192 data = (data & ~(0xffff << ((where & 3) << 3))) |
193 (val << ((where & 3) << 3));
194 break;
195 case 4:
196 data = val;
197 break;
198 }
199
200 bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRT_REG);
201
202 return PCIBIOS_SUCCESSFUL;
203}
204
205struct pci_ops mt7620_pci_ops = {
206 .read = pci_config_read,
207 .write = pci_config_write,
208};
209
210static struct resource mt7620_res_pci_mem1;
211static struct resource mt7620_res_pci_io1;
212struct pci_controller mt7620_controller = {
213 .pci_ops = &mt7620_pci_ops,
214 .mem_resource = &mt7620_res_pci_mem1,
215 .mem_offset = 0x00000000UL,
216 .io_resource = &mt7620_res_pci_io1,
217 .io_offset = 0x00000000UL,
218 .io_map_base = 0xa0000000,
219};
220
221static int mt7620_pci_hw_init(struct platform_device *pdev)
222{
223 /* bypass PCIe DLL */
224 pcie_phy(0x0, 0x80);
225 pcie_phy(0x1, 0x04);
226
227 /* Elastic buffer control */
228 pcie_phy(0x68, 0xB4);
229
230 /* put core into reset */
231 pcie_m32(0, PCIRST, RALINK_PCI_PCICFG_ADDR);
232 reset_control_assert(rstpcie0);
233
234 /* disable power and all clocks */
235 rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
236 rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV);
237
238 /* bring core out of reset */
239 reset_control_deassert(rstpcie0);
240 rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
241 mdelay(100);
242
243 if (!(rt_sysc_r32(PPLL_CFG1) & PPLL_LD)) {
244 dev_err(&pdev->dev, "pcie PLL not locked, aborting init\n");
245 reset_control_assert(rstpcie0);
246 rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
247 return -1;
248 }
249
250 /* power up the bus */
251 rt_sysc_m32(LC_CKDRVHZ | LC_CKDRVOHZ, LC_CKDRVPD | PDRV_SW_SET,
252 PPLL_DRV);
253
254 return 0;
255}
256
257static int mt7628_pci_hw_init(struct platform_device *pdev)
258{
259 u32 val = 0;
260
261 /* bring the core out of reset */
262 rt_sysc_m32(BIT(16), 0, RALINK_GPIOMODE);
263 reset_control_deassert(rstpcie0);
264
265 /* enable the pci clk */
266 rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
267 mdelay(100);
268
269 /* voodoo from the SDK driver */
270 pcie_m32(~0xff, 0x5, RALINK_PCIEPHY_P0_CTL_OFFSET);
271
272 pci_config_read(NULL, 0, 0x70c, 4, &val);
273 val &= ~(0xff) << 8;
274 val |= 0x50 << 8;
275 pci_config_write(NULL, 0, 0x70c, 4, val);
276
277 pci_config_read(NULL, 0, 0x70c, 4, &val);
278 dev_err(&pdev->dev, "Port 0 N_FTS = %x\n", (unsigned int) val);
279
280 return 0;
281}
282
283static int mt7620_pci_probe(struct platform_device *pdev)
284{
285 struct resource *bridge_res = platform_get_resource(pdev,
286 IORESOURCE_MEM, 0);
287 struct resource *pcie_res = platform_get_resource(pdev,
288 IORESOURCE_MEM, 1);
289 u32 val = 0;
290
291 rstpcie0 = devm_reset_control_get_exclusive(&pdev->dev, "pcie0");
292 if (IS_ERR(rstpcie0))
293 return PTR_ERR(rstpcie0);
294
295 bridge_base = devm_ioremap_resource(&pdev->dev, bridge_res);
296 if (IS_ERR(bridge_base))
297 return PTR_ERR(bridge_base);
298
299 pcie_base = devm_ioremap_resource(&pdev->dev, pcie_res);
300 if (IS_ERR(pcie_base))
301 return PTR_ERR(pcie_base);
302
303 iomem_resource.start = 0;
304 iomem_resource.end = ~0;
305 ioport_resource.start = 0;
306 ioport_resource.end = ~0;
307
308 /* bring up the pci core */
309 switch (ralink_soc) {
310 case MT762X_SOC_MT7620A:
311 if (mt7620_pci_hw_init(pdev))
312 return -1;
313 break;
314
315 case MT762X_SOC_MT7628AN:
316 case MT762X_SOC_MT7688:
317 if (mt7628_pci_hw_init(pdev))
318 return -1;
319 break;
320
321 default:
322 dev_err(&pdev->dev, "pcie is not supported on this hardware\n");
323 return -1;
324 }
325 mdelay(50);
326
327 /* enable write access */
328 pcie_m32(PCIRST, 0, RALINK_PCI_PCICFG_ADDR);
329 mdelay(100);
330
331 /* check if there is a card present */
332 if ((pcie_r32(RALINK_PCI0_STATUS) & PCIE_LINK_UP_ST) == 0) {
333 reset_control_assert(rstpcie0);
334 rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
335 if (ralink_soc == MT762X_SOC_MT7620A)
336 rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV);
337 dev_err(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n");
338 return -1;
339 }
340
341 /* setup ranges */
342 bridge_w32(0xffffffff, RALINK_PCI_MEMBASE);
343 bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE);
344
345 pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR);
346 pcie_w32(RALINK_PCI_MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR);
347 pcie_w32(0x06040001, RALINK_PCI0_CLASS);
348
349 /* enable interrupts */
350 pcie_m32(0, PCIINT2, RALINK_PCI_PCIENA);
351
352 /* voodoo from the SDK driver */
353 pci_config_read(NULL, 0, 4, 4, &val);
354 pci_config_write(NULL, 0, 4, 4, val | 0x7);
355
356 pci_load_of_ranges(&mt7620_controller, pdev->dev.of_node);
357 register_pci_controller(&mt7620_controller);
358
359 return 0;
360}
361
362int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
363{
364 u16 cmd;
365 u32 val;
366 int irq = 0;
367
368 if ((dev->bus->number == 0) && (slot == 0)) {
369 pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR);
370 pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4,
371 RALINK_PCI_MEMORY_BASE);
372 pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val);
373 } else if ((dev->bus->number == 1) && (slot == 0x0)) {
374 irq = RALINK_INT_PCIE0;
375 } else {
376 dev_err(&dev->dev, "no irq found - bus=0x%x, slot = 0x%x\n",
377 dev->bus->number, slot);
378 return 0;
379 }
380 dev_err(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n",
381 dev->bus->number, slot, irq);
382
383 /* configure the cache line size to 0x14 */
384 pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14);
385
386 /* configure latency timer to 0xff */
387 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xff);
388 pci_read_config_word(dev, PCI_COMMAND, &cmd);
389
390 /* setup the slot */
391 cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
392 pci_write_config_word(dev, PCI_COMMAND, cmd);
393 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
394
395 return irq;
396}
397
398int pcibios_plat_dev_init(struct pci_dev *dev)
399{
400 return 0;
401}
402
403static const struct of_device_id mt7620_pci_ids[] = {
404 { .compatible = "mediatek,mt7620-pci" },
405 {},
406};
407
408static struct platform_driver mt7620_pci_driver = {
409 .probe = mt7620_pci_probe,
410 .driver = {
411 .name = "mt7620-pci",
412 .of_match_table = of_match_ptr(mt7620_pci_ids),
413 },
414};
415
416static int __init mt7620_pci_init(void)
417{
418 return platform_driver_register(&mt7620_pci_driver);
419}
420
421arch_initcall(mt7620_pci_init);