Loading...
1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3 * Copyright (C) 2017 Imagination Technologies
4 * Author: Paul Burton <paul.burton@mips.com>
5 */
6
7#ifndef __MIPS_ASM_MIPS_CPS_H__
8#define __MIPS_ASM_MIPS_CPS_H__
9
10#include <linux/io.h>
11#include <linux/types.h>
12
13extern unsigned long __cps_access_bad_size(void)
14 __compiletime_error("Bad size for CPS accessor");
15
16#define CPS_ACCESSOR_A(unit, off, name) \
17static inline void *addr_##unit##_##name(void) \
18{ \
19 return mips_##unit##_base + (off); \
20}
21
22#define CPS_ACCESSOR_R(unit, sz, name) \
23static inline uint##sz##_t read_##unit##_##name(void) \
24{ \
25 uint64_t val64; \
26 \
27 switch (sz) { \
28 case 32: \
29 return __raw_readl(addr_##unit##_##name()); \
30 \
31 case 64: \
32 if (mips_cm_is64) \
33 return __raw_readq(addr_##unit##_##name()); \
34 \
35 val64 = __raw_readl(addr_##unit##_##name() + 4); \
36 val64 <<= 32; \
37 val64 |= __raw_readl(addr_##unit##_##name()); \
38 return val64; \
39 \
40 default: \
41 return __cps_access_bad_size(); \
42 } \
43}
44
45#define CPS_ACCESSOR_W(unit, sz, name) \
46static inline void write_##unit##_##name(uint##sz##_t val) \
47{ \
48 switch (sz) { \
49 case 32: \
50 __raw_writel(val, addr_##unit##_##name()); \
51 break; \
52 \
53 case 64: \
54 if (mips_cm_is64) { \
55 __raw_writeq(val, addr_##unit##_##name()); \
56 break; \
57 } \
58 \
59 __raw_writel((uint64_t)val >> 32, \
60 addr_##unit##_##name() + 4); \
61 __raw_writel(val, addr_##unit##_##name()); \
62 break; \
63 \
64 default: \
65 __cps_access_bad_size(); \
66 break; \
67 } \
68}
69
70#define CPS_ACCESSOR_M(unit, sz, name) \
71static inline void change_##unit##_##name(uint##sz##_t mask, \
72 uint##sz##_t val) \
73{ \
74 uint##sz##_t reg_val = read_##unit##_##name(); \
75 reg_val &= ~mask; \
76 reg_val |= val; \
77 write_##unit##_##name(reg_val); \
78} \
79 \
80static inline void set_##unit##_##name(uint##sz##_t val) \
81{ \
82 change_##unit##_##name(val, val); \
83} \
84 \
85static inline void clear_##unit##_##name(uint##sz##_t val) \
86{ \
87 change_##unit##_##name(val, 0); \
88}
89
90#define CPS_ACCESSOR_RO(unit, sz, off, name) \
91 CPS_ACCESSOR_A(unit, off, name) \
92 CPS_ACCESSOR_R(unit, sz, name)
93
94#define CPS_ACCESSOR_WO(unit, sz, off, name) \
95 CPS_ACCESSOR_A(unit, off, name) \
96 CPS_ACCESSOR_W(unit, sz, name)
97
98#define CPS_ACCESSOR_RW(unit, sz, off, name) \
99 CPS_ACCESSOR_A(unit, off, name) \
100 CPS_ACCESSOR_R(unit, sz, name) \
101 CPS_ACCESSOR_W(unit, sz, name) \
102 CPS_ACCESSOR_M(unit, sz, name)
103
104#include <asm/mips-cm.h>
105#include <asm/mips-cpc.h>
106#include <asm/mips-gic.h>
107
108/**
109 * mips_cps_numclusters - return the number of clusters present in the system
110 *
111 * Returns the number of clusters in the system.
112 */
113static inline unsigned int mips_cps_numclusters(void)
114{
115 unsigned int num_clusters;
116
117 if (mips_cm_revision() < CM_REV_CM3_5)
118 return 1;
119
120 num_clusters = read_gcr_config() & CM_GCR_CONFIG_NUM_CLUSTERS;
121 num_clusters >>= __ffs(CM_GCR_CONFIG_NUM_CLUSTERS);
122 return num_clusters;
123}
124
125/**
126 * mips_cps_cluster_config - return (GCR|CPC)_CONFIG from a cluster
127 * @cluster: the ID of the cluster whose config we want
128 *
129 * Read the value of GCR_CONFIG (or its CPC_CONFIG mirror) from a @cluster.
130 *
131 * Returns the value of GCR_CONFIG.
132 */
133static inline uint64_t mips_cps_cluster_config(unsigned int cluster)
134{
135 uint64_t config;
136
137 if (mips_cm_revision() < CM_REV_CM3_5) {
138 /*
139 * Prior to CM 3.5 we don't have the notion of multiple
140 * clusters so we can trivially read the GCR_CONFIG register
141 * within this cluster.
142 */
143 WARN_ON(cluster != 0);
144 config = read_gcr_config();
145 } else {
146 /*
147 * From CM 3.5 onwards we read the CPC_CONFIG mirror of
148 * GCR_CONFIG via the redirect region, since the CPC is always
149 * powered up allowing us not to need to power up the CM.
150 */
151 mips_cm_lock_other(cluster, 0, 0, CM_GCR_Cx_OTHER_BLOCK_GLOBAL);
152 config = read_cpc_redir_config();
153 mips_cm_unlock_other();
154 }
155
156 return config;
157}
158
159/**
160 * mips_cps_numcores - return the number of cores present in a cluster
161 * @cluster: the ID of the cluster whose core count we want
162 *
163 * Returns the value of the PCORES field of the GCR_CONFIG register plus 1, or
164 * zero if no Coherence Manager is present.
165 */
166static inline unsigned int mips_cps_numcores(unsigned int cluster)
167{
168 if (!mips_cm_present())
169 return 0;
170
171 /* Add one before masking to handle 0xff indicating no cores */
172 return (mips_cps_cluster_config(cluster) + 1) & CM_GCR_CONFIG_PCORES;
173}
174
175/**
176 * mips_cps_numiocu - return the number of IOCUs present in a cluster
177 * @cluster: the ID of the cluster whose IOCU count we want
178 *
179 * Returns the value of the NUMIOCU field of the GCR_CONFIG register, or zero
180 * if no Coherence Manager is present.
181 */
182static inline unsigned int mips_cps_numiocu(unsigned int cluster)
183{
184 unsigned int num_iocu;
185
186 if (!mips_cm_present())
187 return 0;
188
189 num_iocu = mips_cps_cluster_config(cluster) & CM_GCR_CONFIG_NUMIOCU;
190 num_iocu >>= __ffs(CM_GCR_CONFIG_NUMIOCU);
191 return num_iocu;
192}
193
194/**
195 * mips_cps_numvps - return the number of VPs (threads) supported by a core
196 * @cluster: the ID of the cluster containing the core we want to examine
197 * @core: the ID of the core whose VP count we want
198 *
199 * Returns the number of Virtual Processors (VPs, ie. hardware threads) that
200 * are supported by the given @core in the given @cluster. If the core or the
201 * kernel do not support hardware mutlti-threading this returns 1.
202 */
203static inline unsigned int mips_cps_numvps(unsigned int cluster, unsigned int core)
204{
205 unsigned int cfg;
206
207 if (!mips_cm_present())
208 return 1;
209
210 if ((!IS_ENABLED(CONFIG_MIPS_MT_SMP) || !cpu_has_mipsmt)
211 && (!IS_ENABLED(CONFIG_CPU_MIPSR6) || !cpu_has_vp))
212 return 1;
213
214 mips_cm_lock_other(cluster, core, 0, CM_GCR_Cx_OTHER_BLOCK_LOCAL);
215
216 if (mips_cm_revision() < CM_REV_CM3_5) {
217 /*
218 * Prior to CM 3.5 we can only have one cluster & don't have
219 * CPC_Cx_CONFIG, so we read GCR_Cx_CONFIG.
220 */
221 cfg = read_gcr_co_config();
222 } else {
223 /*
224 * From CM 3.5 onwards we read CPC_Cx_CONFIG because the CPC is
225 * always powered, which allows us to not worry about powering
226 * up the cluster's CM here.
227 */
228 cfg = read_cpc_co_config();
229 }
230
231 mips_cm_unlock_other();
232
233 return (cfg + 1) & CM_GCR_Cx_CONFIG_PVPE;
234}
235
236#endif /* __MIPS_ASM_MIPS_CPS_H__ */
1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3 * Copyright (C) 2017 Imagination Technologies
4 * Author: Paul Burton <paul.burton@mips.com>
5 */
6
7#ifndef __MIPS_ASM_MIPS_CPS_H__
8#define __MIPS_ASM_MIPS_CPS_H__
9
10#include <linux/bitfield.h>
11#include <linux/io.h>
12#include <linux/types.h>
13
14extern unsigned long __cps_access_bad_size(void)
15 __compiletime_error("Bad size for CPS accessor");
16
17#define CPS_ACCESSOR_A(unit, off, name) \
18static inline void *addr_##unit##_##name(void) \
19{ \
20 return mips_##unit##_base + (off); \
21}
22
23#define CPS_ACCESSOR_R(unit, sz, name) \
24static inline uint##sz##_t read_##unit##_##name(void) \
25{ \
26 uint64_t val64; \
27 \
28 switch (sz) { \
29 case 32: \
30 return __raw_readl(addr_##unit##_##name()); \
31 \
32 case 64: \
33 if (mips_cm_is64) \
34 return __raw_readq(addr_##unit##_##name()); \
35 \
36 val64 = __raw_readl(addr_##unit##_##name() + 4); \
37 val64 <<= 32; \
38 val64 |= __raw_readl(addr_##unit##_##name()); \
39 return val64; \
40 \
41 default: \
42 return __cps_access_bad_size(); \
43 } \
44}
45
46#define CPS_ACCESSOR_W(unit, sz, name) \
47static inline void write_##unit##_##name(uint##sz##_t val) \
48{ \
49 switch (sz) { \
50 case 32: \
51 __raw_writel(val, addr_##unit##_##name()); \
52 break; \
53 \
54 case 64: \
55 if (mips_cm_is64) { \
56 __raw_writeq(val, addr_##unit##_##name()); \
57 break; \
58 } \
59 \
60 __raw_writel((uint64_t)val >> 32, \
61 addr_##unit##_##name() + 4); \
62 __raw_writel(val, addr_##unit##_##name()); \
63 break; \
64 \
65 default: \
66 __cps_access_bad_size(); \
67 break; \
68 } \
69}
70
71#define CPS_ACCESSOR_M(unit, sz, name) \
72static inline void change_##unit##_##name(uint##sz##_t mask, \
73 uint##sz##_t val) \
74{ \
75 uint##sz##_t reg_val = read_##unit##_##name(); \
76 reg_val &= ~mask; \
77 reg_val |= val; \
78 write_##unit##_##name(reg_val); \
79} \
80 \
81static inline void set_##unit##_##name(uint##sz##_t val) \
82{ \
83 change_##unit##_##name(val, val); \
84} \
85 \
86static inline void clear_##unit##_##name(uint##sz##_t val) \
87{ \
88 change_##unit##_##name(val, 0); \
89}
90
91#define CPS_ACCESSOR_RO(unit, sz, off, name) \
92 CPS_ACCESSOR_A(unit, off, name) \
93 CPS_ACCESSOR_R(unit, sz, name)
94
95#define CPS_ACCESSOR_WO(unit, sz, off, name) \
96 CPS_ACCESSOR_A(unit, off, name) \
97 CPS_ACCESSOR_W(unit, sz, name)
98
99#define CPS_ACCESSOR_RW(unit, sz, off, name) \
100 CPS_ACCESSOR_A(unit, off, name) \
101 CPS_ACCESSOR_R(unit, sz, name) \
102 CPS_ACCESSOR_W(unit, sz, name) \
103 CPS_ACCESSOR_M(unit, sz, name)
104
105#include <asm/mips-cm.h>
106#include <asm/mips-cpc.h>
107#include <asm/mips-gic.h>
108
109/**
110 * mips_cps_numclusters - return the number of clusters present in the system
111 *
112 * Returns the number of clusters in the system.
113 */
114static inline unsigned int mips_cps_numclusters(void)
115{
116 if (mips_cm_revision() < CM_REV_CM3_5)
117 return 1;
118
119 return FIELD_GET(CM_GCR_CONFIG_NUM_CLUSTERS, read_gcr_config());
120}
121
122/**
123 * mips_cps_cluster_config - return (GCR|CPC)_CONFIG from a cluster
124 * @cluster: the ID of the cluster whose config we want
125 *
126 * Read the value of GCR_CONFIG (or its CPC_CONFIG mirror) from a @cluster.
127 *
128 * Returns the value of GCR_CONFIG.
129 */
130static inline uint64_t mips_cps_cluster_config(unsigned int cluster)
131{
132 uint64_t config;
133
134 if (mips_cm_revision() < CM_REV_CM3_5) {
135 /*
136 * Prior to CM 3.5 we don't have the notion of multiple
137 * clusters so we can trivially read the GCR_CONFIG register
138 * within this cluster.
139 */
140 WARN_ON(cluster != 0);
141 config = read_gcr_config();
142 } else {
143 /*
144 * From CM 3.5 onwards we read the CPC_CONFIG mirror of
145 * GCR_CONFIG via the redirect region, since the CPC is always
146 * powered up allowing us not to need to power up the CM.
147 */
148 mips_cm_lock_other(cluster, 0, 0, CM_GCR_Cx_OTHER_BLOCK_GLOBAL);
149 config = read_cpc_redir_config();
150 mips_cm_unlock_other();
151 }
152
153 return config;
154}
155
156/**
157 * mips_cps_numcores - return the number of cores present in a cluster
158 * @cluster: the ID of the cluster whose core count we want
159 *
160 * Returns the value of the PCORES field of the GCR_CONFIG register plus 1, or
161 * zero if no Coherence Manager is present.
162 */
163static inline unsigned int mips_cps_numcores(unsigned int cluster)
164{
165 if (!mips_cm_present())
166 return 0;
167
168 /* Add one before masking to handle 0xff indicating no cores */
169 return FIELD_GET(CM_GCR_CONFIG_PCORES,
170 mips_cps_cluster_config(cluster) + 1);
171}
172
173/**
174 * mips_cps_numiocu - return the number of IOCUs present in a cluster
175 * @cluster: the ID of the cluster whose IOCU count we want
176 *
177 * Returns the value of the NUMIOCU field of the GCR_CONFIG register, or zero
178 * if no Coherence Manager is present.
179 */
180static inline unsigned int mips_cps_numiocu(unsigned int cluster)
181{
182 if (!mips_cm_present())
183 return 0;
184
185 return FIELD_GET(CM_GCR_CONFIG_NUMIOCU,
186 mips_cps_cluster_config(cluster));
187}
188
189/**
190 * mips_cps_numvps - return the number of VPs (threads) supported by a core
191 * @cluster: the ID of the cluster containing the core we want to examine
192 * @core: the ID of the core whose VP count we want
193 *
194 * Returns the number of Virtual Processors (VPs, ie. hardware threads) that
195 * are supported by the given @core in the given @cluster. If the core or the
196 * kernel do not support hardware mutlti-threading this returns 1.
197 */
198static inline unsigned int mips_cps_numvps(unsigned int cluster, unsigned int core)
199{
200 unsigned int cfg;
201
202 if (!mips_cm_present())
203 return 1;
204
205 if ((!IS_ENABLED(CONFIG_MIPS_MT_SMP) || !cpu_has_mipsmt)
206 && (!IS_ENABLED(CONFIG_CPU_MIPSR6) || !cpu_has_vp))
207 return 1;
208
209 mips_cm_lock_other(cluster, core, 0, CM_GCR_Cx_OTHER_BLOCK_LOCAL);
210
211 if (mips_cm_revision() < CM_REV_CM3_5) {
212 /*
213 * Prior to CM 3.5 we can only have one cluster & don't have
214 * CPC_Cx_CONFIG, so we read GCR_Cx_CONFIG.
215 */
216 cfg = read_gcr_co_config();
217 } else {
218 /*
219 * From CM 3.5 onwards we read CPC_Cx_CONFIG because the CPC is
220 * always powered, which allows us to not worry about powering
221 * up the cluster's CM here.
222 */
223 cfg = read_cpc_co_config();
224 }
225
226 mips_cm_unlock_other();
227
228 return FIELD_GET(CM_GCR_Cx_CONFIG_PVPE, cfg + 1);
229}
230
231#endif /* __MIPS_ASM_MIPS_CPS_H__ */