Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * PCI VPD support
4 *
5 * Copyright (C) 2010 Broadcom Corporation.
6 */
7
8#include <linux/pci.h>
9#include <linux/delay.h>
10#include <linux/export.h>
11#include <linux/sched/signal.h>
12#include "pci.h"
13
14/* VPD access through PCI 2.2+ VPD capability */
15
16struct pci_vpd_ops {
17 ssize_t (*read)(struct pci_dev *dev, loff_t pos, size_t count, void *buf);
18 ssize_t (*write)(struct pci_dev *dev, loff_t pos, size_t count, const void *buf);
19 int (*set_size)(struct pci_dev *dev, size_t len);
20};
21
22struct pci_vpd {
23 const struct pci_vpd_ops *ops;
24 struct bin_attribute *attr; /* Descriptor for sysfs VPD entry */
25 struct mutex lock;
26 unsigned int len;
27 u16 flag;
28 u8 cap;
29 unsigned int busy:1;
30 unsigned int valid:1;
31};
32
33/**
34 * pci_read_vpd - Read one entry from Vital Product Data
35 * @dev: pci device struct
36 * @pos: offset in vpd space
37 * @count: number of bytes to read
38 * @buf: pointer to where to store result
39 */
40ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf)
41{
42 if (!dev->vpd || !dev->vpd->ops)
43 return -ENODEV;
44 return dev->vpd->ops->read(dev, pos, count, buf);
45}
46EXPORT_SYMBOL(pci_read_vpd);
47
48/**
49 * pci_write_vpd - Write entry to Vital Product Data
50 * @dev: pci device struct
51 * @pos: offset in vpd space
52 * @count: number of bytes to write
53 * @buf: buffer containing write data
54 */
55ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf)
56{
57 if (!dev->vpd || !dev->vpd->ops)
58 return -ENODEV;
59 return dev->vpd->ops->write(dev, pos, count, buf);
60}
61EXPORT_SYMBOL(pci_write_vpd);
62
63/**
64 * pci_set_vpd_size - Set size of Vital Product Data space
65 * @dev: pci device struct
66 * @len: size of vpd space
67 */
68int pci_set_vpd_size(struct pci_dev *dev, size_t len)
69{
70 if (!dev->vpd || !dev->vpd->ops)
71 return -ENODEV;
72 return dev->vpd->ops->set_size(dev, len);
73}
74EXPORT_SYMBOL(pci_set_vpd_size);
75
76#define PCI_VPD_MAX_SIZE (PCI_VPD_ADDR_MASK + 1)
77
78/**
79 * pci_vpd_size - determine actual size of Vital Product Data
80 * @dev: pci device struct
81 * @old_size: current assumed size, also maximum allowed size
82 */
83static size_t pci_vpd_size(struct pci_dev *dev, size_t old_size)
84{
85 size_t off = 0;
86 unsigned char header[1+2]; /* 1 byte tag, 2 bytes length */
87
88 while (off < old_size &&
89 pci_read_vpd(dev, off, 1, header) == 1) {
90 unsigned char tag;
91
92 if (header[0] & PCI_VPD_LRDT) {
93 /* Large Resource Data Type Tag */
94 tag = pci_vpd_lrdt_tag(header);
95 /* Only read length from known tag items */
96 if ((tag == PCI_VPD_LTIN_ID_STRING) ||
97 (tag == PCI_VPD_LTIN_RO_DATA) ||
98 (tag == PCI_VPD_LTIN_RW_DATA)) {
99 if (pci_read_vpd(dev, off+1, 2,
100 &header[1]) != 2) {
101 pci_warn(dev, "invalid large VPD tag %02x size at offset %zu",
102 tag, off + 1);
103 return 0;
104 }
105 off += PCI_VPD_LRDT_TAG_SIZE +
106 pci_vpd_lrdt_size(header);
107 }
108 } else {
109 /* Short Resource Data Type Tag */
110 off += PCI_VPD_SRDT_TAG_SIZE +
111 pci_vpd_srdt_size(header);
112 tag = pci_vpd_srdt_tag(header);
113 }
114
115 if (tag == PCI_VPD_STIN_END) /* End tag descriptor */
116 return off;
117
118 if ((tag != PCI_VPD_LTIN_ID_STRING) &&
119 (tag != PCI_VPD_LTIN_RO_DATA) &&
120 (tag != PCI_VPD_LTIN_RW_DATA)) {
121 pci_warn(dev, "invalid %s VPD tag %02x at offset %zu",
122 (header[0] & PCI_VPD_LRDT) ? "large" : "short",
123 tag, off);
124 return 0;
125 }
126 }
127 return 0;
128}
129
130/*
131 * Wait for last operation to complete.
132 * This code has to spin since there is no other notification from the PCI
133 * hardware. Since the VPD is often implemented by serial attachment to an
134 * EEPROM, it may take many milliseconds to complete.
135 *
136 * Returns 0 on success, negative values indicate error.
137 */
138static int pci_vpd_wait(struct pci_dev *dev)
139{
140 struct pci_vpd *vpd = dev->vpd;
141 unsigned long timeout = jiffies + msecs_to_jiffies(125);
142 unsigned long max_sleep = 16;
143 u16 status;
144 int ret;
145
146 if (!vpd->busy)
147 return 0;
148
149 do {
150 ret = pci_user_read_config_word(dev, vpd->cap + PCI_VPD_ADDR,
151 &status);
152 if (ret < 0)
153 return ret;
154
155 if ((status & PCI_VPD_ADDR_F) == vpd->flag) {
156 vpd->busy = 0;
157 return 0;
158 }
159
160 if (fatal_signal_pending(current))
161 return -EINTR;
162
163 if (time_after(jiffies, timeout))
164 break;
165
166 usleep_range(10, max_sleep);
167 if (max_sleep < 1024)
168 max_sleep *= 2;
169 } while (true);
170
171 pci_warn(dev, "VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update\n");
172 return -ETIMEDOUT;
173}
174
175static ssize_t pci_vpd_read(struct pci_dev *dev, loff_t pos, size_t count,
176 void *arg)
177{
178 struct pci_vpd *vpd = dev->vpd;
179 int ret;
180 loff_t end = pos + count;
181 u8 *buf = arg;
182
183 if (pos < 0)
184 return -EINVAL;
185
186 if (!vpd->valid) {
187 vpd->valid = 1;
188 vpd->len = pci_vpd_size(dev, vpd->len);
189 }
190
191 if (vpd->len == 0)
192 return -EIO;
193
194 if (pos > vpd->len)
195 return 0;
196
197 if (end > vpd->len) {
198 end = vpd->len;
199 count = end - pos;
200 }
201
202 if (mutex_lock_killable(&vpd->lock))
203 return -EINTR;
204
205 ret = pci_vpd_wait(dev);
206 if (ret < 0)
207 goto out;
208
209 while (pos < end) {
210 u32 val;
211 unsigned int i, skip;
212
213 ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR,
214 pos & ~3);
215 if (ret < 0)
216 break;
217 vpd->busy = 1;
218 vpd->flag = PCI_VPD_ADDR_F;
219 ret = pci_vpd_wait(dev);
220 if (ret < 0)
221 break;
222
223 ret = pci_user_read_config_dword(dev, vpd->cap + PCI_VPD_DATA, &val);
224 if (ret < 0)
225 break;
226
227 skip = pos & 3;
228 for (i = 0; i < sizeof(u32); i++) {
229 if (i >= skip) {
230 *buf++ = val;
231 if (++pos == end)
232 break;
233 }
234 val >>= 8;
235 }
236 }
237out:
238 mutex_unlock(&vpd->lock);
239 return ret ? ret : count;
240}
241
242static ssize_t pci_vpd_write(struct pci_dev *dev, loff_t pos, size_t count,
243 const void *arg)
244{
245 struct pci_vpd *vpd = dev->vpd;
246 const u8 *buf = arg;
247 loff_t end = pos + count;
248 int ret = 0;
249
250 if (pos < 0 || (pos & 3) || (count & 3))
251 return -EINVAL;
252
253 if (!vpd->valid) {
254 vpd->valid = 1;
255 vpd->len = pci_vpd_size(dev, vpd->len);
256 }
257
258 if (vpd->len == 0)
259 return -EIO;
260
261 if (end > vpd->len)
262 return -EINVAL;
263
264 if (mutex_lock_killable(&vpd->lock))
265 return -EINTR;
266
267 ret = pci_vpd_wait(dev);
268 if (ret < 0)
269 goto out;
270
271 while (pos < end) {
272 u32 val;
273
274 val = *buf++;
275 val |= *buf++ << 8;
276 val |= *buf++ << 16;
277 val |= *buf++ << 24;
278
279 ret = pci_user_write_config_dword(dev, vpd->cap + PCI_VPD_DATA, val);
280 if (ret < 0)
281 break;
282 ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR,
283 pos | PCI_VPD_ADDR_F);
284 if (ret < 0)
285 break;
286
287 vpd->busy = 1;
288 vpd->flag = 0;
289 ret = pci_vpd_wait(dev);
290 if (ret < 0)
291 break;
292
293 pos += sizeof(u32);
294 }
295out:
296 mutex_unlock(&vpd->lock);
297 return ret ? ret : count;
298}
299
300static int pci_vpd_set_size(struct pci_dev *dev, size_t len)
301{
302 struct pci_vpd *vpd = dev->vpd;
303
304 if (len == 0 || len > PCI_VPD_MAX_SIZE)
305 return -EIO;
306
307 vpd->valid = 1;
308 vpd->len = len;
309
310 return 0;
311}
312
313static const struct pci_vpd_ops pci_vpd_ops = {
314 .read = pci_vpd_read,
315 .write = pci_vpd_write,
316 .set_size = pci_vpd_set_size,
317};
318
319static ssize_t pci_vpd_f0_read(struct pci_dev *dev, loff_t pos, size_t count,
320 void *arg)
321{
322 struct pci_dev *tdev = pci_get_slot(dev->bus,
323 PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
324 ssize_t ret;
325
326 if (!tdev)
327 return -ENODEV;
328
329 ret = pci_read_vpd(tdev, pos, count, arg);
330 pci_dev_put(tdev);
331 return ret;
332}
333
334static ssize_t pci_vpd_f0_write(struct pci_dev *dev, loff_t pos, size_t count,
335 const void *arg)
336{
337 struct pci_dev *tdev = pci_get_slot(dev->bus,
338 PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
339 ssize_t ret;
340
341 if (!tdev)
342 return -ENODEV;
343
344 ret = pci_write_vpd(tdev, pos, count, arg);
345 pci_dev_put(tdev);
346 return ret;
347}
348
349static int pci_vpd_f0_set_size(struct pci_dev *dev, size_t len)
350{
351 struct pci_dev *tdev = pci_get_slot(dev->bus,
352 PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
353 int ret;
354
355 if (!tdev)
356 return -ENODEV;
357
358 ret = pci_set_vpd_size(tdev, len);
359 pci_dev_put(tdev);
360 return ret;
361}
362
363static const struct pci_vpd_ops pci_vpd_f0_ops = {
364 .read = pci_vpd_f0_read,
365 .write = pci_vpd_f0_write,
366 .set_size = pci_vpd_f0_set_size,
367};
368
369int pci_vpd_init(struct pci_dev *dev)
370{
371 struct pci_vpd *vpd;
372 u8 cap;
373
374 cap = pci_find_capability(dev, PCI_CAP_ID_VPD);
375 if (!cap)
376 return -ENODEV;
377
378 vpd = kzalloc(sizeof(*vpd), GFP_ATOMIC);
379 if (!vpd)
380 return -ENOMEM;
381
382 vpd->len = PCI_VPD_MAX_SIZE;
383 if (dev->dev_flags & PCI_DEV_FLAGS_VPD_REF_F0)
384 vpd->ops = &pci_vpd_f0_ops;
385 else
386 vpd->ops = &pci_vpd_ops;
387 mutex_init(&vpd->lock);
388 vpd->cap = cap;
389 vpd->busy = 0;
390 vpd->valid = 0;
391 dev->vpd = vpd;
392 return 0;
393}
394
395void pci_vpd_release(struct pci_dev *dev)
396{
397 kfree(dev->vpd);
398}
399
400static ssize_t read_vpd_attr(struct file *filp, struct kobject *kobj,
401 struct bin_attribute *bin_attr, char *buf,
402 loff_t off, size_t count)
403{
404 struct pci_dev *dev = to_pci_dev(kobj_to_dev(kobj));
405
406 if (bin_attr->size > 0) {
407 if (off > bin_attr->size)
408 count = 0;
409 else if (count > bin_attr->size - off)
410 count = bin_attr->size - off;
411 }
412
413 return pci_read_vpd(dev, off, count, buf);
414}
415
416static ssize_t write_vpd_attr(struct file *filp, struct kobject *kobj,
417 struct bin_attribute *bin_attr, char *buf,
418 loff_t off, size_t count)
419{
420 struct pci_dev *dev = to_pci_dev(kobj_to_dev(kobj));
421
422 if (bin_attr->size > 0) {
423 if (off > bin_attr->size)
424 count = 0;
425 else if (count > bin_attr->size - off)
426 count = bin_attr->size - off;
427 }
428
429 return pci_write_vpd(dev, off, count, buf);
430}
431
432void pcie_vpd_create_sysfs_dev_files(struct pci_dev *dev)
433{
434 int retval;
435 struct bin_attribute *attr;
436
437 if (!dev->vpd)
438 return;
439
440 attr = kzalloc(sizeof(*attr), GFP_ATOMIC);
441 if (!attr)
442 return;
443
444 sysfs_bin_attr_init(attr);
445 attr->size = 0;
446 attr->attr.name = "vpd";
447 attr->attr.mode = S_IRUSR | S_IWUSR;
448 attr->read = read_vpd_attr;
449 attr->write = write_vpd_attr;
450 retval = sysfs_create_bin_file(&dev->dev.kobj, attr);
451 if (retval) {
452 kfree(attr);
453 return;
454 }
455
456 dev->vpd->attr = attr;
457}
458
459void pcie_vpd_remove_sysfs_dev_files(struct pci_dev *dev)
460{
461 if (dev->vpd && dev->vpd->attr) {
462 sysfs_remove_bin_file(&dev->dev.kobj, dev->vpd->attr);
463 kfree(dev->vpd->attr);
464 }
465}
466
467int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt)
468{
469 int i;
470
471 for (i = off; i < len; ) {
472 u8 val = buf[i];
473
474 if (val & PCI_VPD_LRDT) {
475 /* Don't return success of the tag isn't complete */
476 if (i + PCI_VPD_LRDT_TAG_SIZE > len)
477 break;
478
479 if (val == rdt)
480 return i;
481
482 i += PCI_VPD_LRDT_TAG_SIZE +
483 pci_vpd_lrdt_size(&buf[i]);
484 } else {
485 u8 tag = val & ~PCI_VPD_SRDT_LEN_MASK;
486
487 if (tag == rdt)
488 return i;
489
490 if (tag == PCI_VPD_SRDT_END)
491 break;
492
493 i += PCI_VPD_SRDT_TAG_SIZE +
494 pci_vpd_srdt_size(&buf[i]);
495 }
496 }
497
498 return -ENOENT;
499}
500EXPORT_SYMBOL_GPL(pci_vpd_find_tag);
501
502int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off,
503 unsigned int len, const char *kw)
504{
505 int i;
506
507 for (i = off; i + PCI_VPD_INFO_FLD_HDR_SIZE <= off + len;) {
508 if (buf[i + 0] == kw[0] &&
509 buf[i + 1] == kw[1])
510 return i;
511
512 i += PCI_VPD_INFO_FLD_HDR_SIZE +
513 pci_vpd_info_field_size(&buf[i]);
514 }
515
516 return -ENOENT;
517}
518EXPORT_SYMBOL_GPL(pci_vpd_find_info_keyword);
519
520#ifdef CONFIG_PCI_QUIRKS
521/*
522 * Quirk non-zero PCI functions to route VPD access through function 0 for
523 * devices that share VPD resources between functions. The functions are
524 * expected to be identical devices.
525 */
526static void quirk_f0_vpd_link(struct pci_dev *dev)
527{
528 struct pci_dev *f0;
529
530 if (!PCI_FUNC(dev->devfn))
531 return;
532
533 f0 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
534 if (!f0)
535 return;
536
537 if (f0->vpd && dev->class == f0->class &&
538 dev->vendor == f0->vendor && dev->device == f0->device)
539 dev->dev_flags |= PCI_DEV_FLAGS_VPD_REF_F0;
540
541 pci_dev_put(f0);
542}
543DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
544 PCI_CLASS_NETWORK_ETHERNET, 8, quirk_f0_vpd_link);
545
546/*
547 * If a device follows the VPD format spec, the PCI core will not read or
548 * write past the VPD End Tag. But some vendors do not follow the VPD
549 * format spec, so we can't tell how much data is safe to access. Devices
550 * may behave unpredictably if we access too much. Blacklist these devices
551 * so we don't touch VPD at all.
552 */
553static void quirk_blacklist_vpd(struct pci_dev *dev)
554{
555 if (dev->vpd) {
556 dev->vpd->len = 0;
557 pci_warn(dev, FW_BUG "disabling VPD access (can't determine size of non-standard VPD format)\n");
558 }
559}
560DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0060, quirk_blacklist_vpd);
561DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x007c, quirk_blacklist_vpd);
562DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0413, quirk_blacklist_vpd);
563DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0078, quirk_blacklist_vpd);
564DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0079, quirk_blacklist_vpd);
565DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0073, quirk_blacklist_vpd);
566DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0071, quirk_blacklist_vpd);
567DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005b, quirk_blacklist_vpd);
568DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x002f, quirk_blacklist_vpd);
569DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005d, quirk_blacklist_vpd);
570DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd);
571DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID,
572 quirk_blacklist_vpd);
573DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_QLOGIC, 0x2261, quirk_blacklist_vpd);
574/*
575 * The Amazon Annapurna Labs 0x0031 device id is reused for other non Root Port
576 * device types, so the quirk is registered for the PCI_CLASS_BRIDGE_PCI class.
577 */
578DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031,
579 PCI_CLASS_BRIDGE_PCI, 8, quirk_blacklist_vpd);
580
581/*
582 * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
583 * VPD end tag will hang the device. This problem was initially
584 * observed when a vpd entry was created in sysfs
585 * ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry
586 * will dump 32k of data. Reading a full 32k will cause an access
587 * beyond the VPD end tag causing the device to hang. Once the device
588 * is hung, the bnx2 driver will not be able to reset the device.
589 * We believe that it is legal to read beyond the end tag and
590 * therefore the solution is to limit the read/write length.
591 */
592static void quirk_brcm_570x_limit_vpd(struct pci_dev *dev)
593{
594 /*
595 * Only disable the VPD capability for 5706, 5706S, 5708,
596 * 5708S and 5709 rev. A
597 */
598 if ((dev->device == PCI_DEVICE_ID_NX2_5706) ||
599 (dev->device == PCI_DEVICE_ID_NX2_5706S) ||
600 (dev->device == PCI_DEVICE_ID_NX2_5708) ||
601 (dev->device == PCI_DEVICE_ID_NX2_5708S) ||
602 ((dev->device == PCI_DEVICE_ID_NX2_5709) &&
603 (dev->revision & 0xf0) == 0x0)) {
604 if (dev->vpd)
605 dev->vpd->len = 0x80;
606 }
607}
608DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
609 PCI_DEVICE_ID_NX2_5706,
610 quirk_brcm_570x_limit_vpd);
611DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
612 PCI_DEVICE_ID_NX2_5706S,
613 quirk_brcm_570x_limit_vpd);
614DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
615 PCI_DEVICE_ID_NX2_5708,
616 quirk_brcm_570x_limit_vpd);
617DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
618 PCI_DEVICE_ID_NX2_5708S,
619 quirk_brcm_570x_limit_vpd);
620DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
621 PCI_DEVICE_ID_NX2_5709,
622 quirk_brcm_570x_limit_vpd);
623DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
624 PCI_DEVICE_ID_NX2_5709S,
625 quirk_brcm_570x_limit_vpd);
626
627static void quirk_chelsio_extend_vpd(struct pci_dev *dev)
628{
629 int chip = (dev->device & 0xf000) >> 12;
630 int func = (dev->device & 0x0f00) >> 8;
631 int prod = (dev->device & 0x00ff) >> 0;
632
633 /*
634 * If this is a T3-based adapter, there's a 1KB VPD area at offset
635 * 0xc00 which contains the preferred VPD values. If this is a T4 or
636 * later based adapter, the special VPD is at offset 0x400 for the
637 * Physical Functions (the SR-IOV Virtual Functions have no VPD
638 * Capabilities). The PCI VPD Access core routines will normally
639 * compute the size of the VPD by parsing the VPD Data Structure at
640 * offset 0x000. This will result in silent failures when attempting
641 * to accesses these other VPD areas which are beyond those computed
642 * limits.
643 */
644 if (chip == 0x0 && prod >= 0x20)
645 pci_set_vpd_size(dev, 8192);
646 else if (chip >= 0x4 && func < 0x8)
647 pci_set_vpd_size(dev, 2048);
648}
649
650DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
651 quirk_chelsio_extend_vpd);
652
653#endif
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * PCI VPD support
4 *
5 * Copyright (C) 2010 Broadcom Corporation.
6 */
7
8#include <linux/pci.h>
9#include <linux/delay.h>
10#include <linux/export.h>
11#include <linux/sched/signal.h>
12#include <asm/unaligned.h>
13#include "pci.h"
14
15#define PCI_VPD_LRDT_TAG_SIZE 3
16#define PCI_VPD_SRDT_LEN_MASK 0x07
17#define PCI_VPD_SRDT_TAG_SIZE 1
18#define PCI_VPD_STIN_END 0x0f
19#define PCI_VPD_INFO_FLD_HDR_SIZE 3
20
21static u16 pci_vpd_lrdt_size(const u8 *lrdt)
22{
23 return get_unaligned_le16(lrdt + 1);
24}
25
26static u8 pci_vpd_srdt_tag(const u8 *srdt)
27{
28 return *srdt >> 3;
29}
30
31static u8 pci_vpd_srdt_size(const u8 *srdt)
32{
33 return *srdt & PCI_VPD_SRDT_LEN_MASK;
34}
35
36static u8 pci_vpd_info_field_size(const u8 *info_field)
37{
38 return info_field[2];
39}
40
41/* VPD access through PCI 2.2+ VPD capability */
42
43static struct pci_dev *pci_get_func0_dev(struct pci_dev *dev)
44{
45 return pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
46}
47
48#define PCI_VPD_MAX_SIZE (PCI_VPD_ADDR_MASK + 1)
49#define PCI_VPD_SZ_INVALID UINT_MAX
50
51/**
52 * pci_vpd_size - determine actual size of Vital Product Data
53 * @dev: pci device struct
54 */
55static size_t pci_vpd_size(struct pci_dev *dev)
56{
57 size_t off = 0, size;
58 unsigned char tag, header[1+2]; /* 1 byte tag, 2 bytes length */
59
60 while (pci_read_vpd_any(dev, off, 1, header) == 1) {
61 size = 0;
62
63 if (off == 0 && (header[0] == 0x00 || header[0] == 0xff))
64 goto error;
65
66 if (header[0] & PCI_VPD_LRDT) {
67 /* Large Resource Data Type Tag */
68 if (pci_read_vpd_any(dev, off + 1, 2, &header[1]) != 2) {
69 pci_warn(dev, "failed VPD read at offset %zu\n",
70 off + 1);
71 return off ?: PCI_VPD_SZ_INVALID;
72 }
73 size = pci_vpd_lrdt_size(header);
74 if (off + size > PCI_VPD_MAX_SIZE)
75 goto error;
76
77 off += PCI_VPD_LRDT_TAG_SIZE + size;
78 } else {
79 /* Short Resource Data Type Tag */
80 tag = pci_vpd_srdt_tag(header);
81 size = pci_vpd_srdt_size(header);
82 if (off + size > PCI_VPD_MAX_SIZE)
83 goto error;
84
85 off += PCI_VPD_SRDT_TAG_SIZE + size;
86 if (tag == PCI_VPD_STIN_END) /* End tag descriptor */
87 return off;
88 }
89 }
90 return off;
91
92error:
93 pci_info(dev, "invalid VPD tag %#04x (size %zu) at offset %zu%s\n",
94 header[0], size, off, off == 0 ?
95 "; assume missing optional EEPROM" : "");
96 return off ?: PCI_VPD_SZ_INVALID;
97}
98
99static bool pci_vpd_available(struct pci_dev *dev, bool check_size)
100{
101 struct pci_vpd *vpd = &dev->vpd;
102
103 if (!vpd->cap)
104 return false;
105
106 if (vpd->len == 0 && check_size) {
107 vpd->len = pci_vpd_size(dev);
108 if (vpd->len == PCI_VPD_SZ_INVALID) {
109 vpd->cap = 0;
110 return false;
111 }
112 }
113
114 return true;
115}
116
117/*
118 * Wait for last operation to complete.
119 * This code has to spin since there is no other notification from the PCI
120 * hardware. Since the VPD is often implemented by serial attachment to an
121 * EEPROM, it may take many milliseconds to complete.
122 * @set: if true wait for flag to be set, else wait for it to be cleared
123 *
124 * Returns 0 on success, negative values indicate error.
125 */
126static int pci_vpd_wait(struct pci_dev *dev, bool set)
127{
128 struct pci_vpd *vpd = &dev->vpd;
129 unsigned long timeout = jiffies + msecs_to_jiffies(125);
130 unsigned long max_sleep = 16;
131 u16 status;
132 int ret;
133
134 do {
135 ret = pci_user_read_config_word(dev, vpd->cap + PCI_VPD_ADDR,
136 &status);
137 if (ret < 0)
138 return ret;
139
140 if (!!(status & PCI_VPD_ADDR_F) == set)
141 return 0;
142
143 if (time_after(jiffies, timeout))
144 break;
145
146 usleep_range(10, max_sleep);
147 if (max_sleep < 1024)
148 max_sleep *= 2;
149 } while (true);
150
151 pci_warn(dev, "VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update\n");
152 return -ETIMEDOUT;
153}
154
155static ssize_t pci_vpd_read(struct pci_dev *dev, loff_t pos, size_t count,
156 void *arg, bool check_size)
157{
158 struct pci_vpd *vpd = &dev->vpd;
159 unsigned int max_len;
160 int ret = 0;
161 loff_t end = pos + count;
162 u8 *buf = arg;
163
164 if (!pci_vpd_available(dev, check_size))
165 return -ENODEV;
166
167 if (pos < 0)
168 return -EINVAL;
169
170 max_len = check_size ? vpd->len : PCI_VPD_MAX_SIZE;
171
172 if (pos >= max_len)
173 return 0;
174
175 if (end > max_len) {
176 end = max_len;
177 count = end - pos;
178 }
179
180 if (mutex_lock_killable(&vpd->lock))
181 return -EINTR;
182
183 while (pos < end) {
184 u32 val;
185 unsigned int i, skip;
186
187 if (fatal_signal_pending(current)) {
188 ret = -EINTR;
189 break;
190 }
191
192 ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR,
193 pos & ~3);
194 if (ret < 0)
195 break;
196 ret = pci_vpd_wait(dev, true);
197 if (ret < 0)
198 break;
199
200 ret = pci_user_read_config_dword(dev, vpd->cap + PCI_VPD_DATA, &val);
201 if (ret < 0)
202 break;
203
204 skip = pos & 3;
205 for (i = 0; i < sizeof(u32); i++) {
206 if (i >= skip) {
207 *buf++ = val;
208 if (++pos == end)
209 break;
210 }
211 val >>= 8;
212 }
213 }
214
215 mutex_unlock(&vpd->lock);
216 return ret ? ret : count;
217}
218
219static ssize_t pci_vpd_write(struct pci_dev *dev, loff_t pos, size_t count,
220 const void *arg, bool check_size)
221{
222 struct pci_vpd *vpd = &dev->vpd;
223 unsigned int max_len;
224 const u8 *buf = arg;
225 loff_t end = pos + count;
226 int ret = 0;
227
228 if (!pci_vpd_available(dev, check_size))
229 return -ENODEV;
230
231 if (pos < 0 || (pos & 3) || (count & 3))
232 return -EINVAL;
233
234 max_len = check_size ? vpd->len : PCI_VPD_MAX_SIZE;
235
236 if (end > max_len)
237 return -EINVAL;
238
239 if (mutex_lock_killable(&vpd->lock))
240 return -EINTR;
241
242 while (pos < end) {
243 ret = pci_user_write_config_dword(dev, vpd->cap + PCI_VPD_DATA,
244 get_unaligned_le32(buf));
245 if (ret < 0)
246 break;
247 ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR,
248 pos | PCI_VPD_ADDR_F);
249 if (ret < 0)
250 break;
251
252 ret = pci_vpd_wait(dev, false);
253 if (ret < 0)
254 break;
255
256 buf += sizeof(u32);
257 pos += sizeof(u32);
258 }
259
260 mutex_unlock(&vpd->lock);
261 return ret ? ret : count;
262}
263
264void pci_vpd_init(struct pci_dev *dev)
265{
266 if (dev->vpd.len == PCI_VPD_SZ_INVALID)
267 return;
268
269 dev->vpd.cap = pci_find_capability(dev, PCI_CAP_ID_VPD);
270 mutex_init(&dev->vpd.lock);
271}
272
273static ssize_t vpd_read(struct file *filp, struct kobject *kobj,
274 struct bin_attribute *bin_attr, char *buf, loff_t off,
275 size_t count)
276{
277 struct pci_dev *dev = to_pci_dev(kobj_to_dev(kobj));
278
279 return pci_read_vpd(dev, off, count, buf);
280}
281
282static ssize_t vpd_write(struct file *filp, struct kobject *kobj,
283 struct bin_attribute *bin_attr, char *buf, loff_t off,
284 size_t count)
285{
286 struct pci_dev *dev = to_pci_dev(kobj_to_dev(kobj));
287
288 return pci_write_vpd(dev, off, count, buf);
289}
290static BIN_ATTR(vpd, 0600, vpd_read, vpd_write, 0);
291
292static struct bin_attribute *vpd_attrs[] = {
293 &bin_attr_vpd,
294 NULL,
295};
296
297static umode_t vpd_attr_is_visible(struct kobject *kobj,
298 struct bin_attribute *a, int n)
299{
300 struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
301
302 if (!pdev->vpd.cap)
303 return 0;
304
305 return a->attr.mode;
306}
307
308const struct attribute_group pci_dev_vpd_attr_group = {
309 .bin_attrs = vpd_attrs,
310 .is_bin_visible = vpd_attr_is_visible,
311};
312
313void *pci_vpd_alloc(struct pci_dev *dev, unsigned int *size)
314{
315 unsigned int len;
316 void *buf;
317 int cnt;
318
319 if (!pci_vpd_available(dev, true))
320 return ERR_PTR(-ENODEV);
321
322 len = dev->vpd.len;
323 buf = kmalloc(len, GFP_KERNEL);
324 if (!buf)
325 return ERR_PTR(-ENOMEM);
326
327 cnt = pci_read_vpd(dev, 0, len, buf);
328 if (cnt != len) {
329 kfree(buf);
330 return ERR_PTR(-EIO);
331 }
332
333 if (size)
334 *size = len;
335
336 return buf;
337}
338EXPORT_SYMBOL_GPL(pci_vpd_alloc);
339
340static int pci_vpd_find_tag(const u8 *buf, unsigned int len, u8 rdt, unsigned int *size)
341{
342 int i = 0;
343
344 /* look for LRDT tags only, end tag is the only SRDT tag */
345 while (i + PCI_VPD_LRDT_TAG_SIZE <= len && buf[i] & PCI_VPD_LRDT) {
346 unsigned int lrdt_len = pci_vpd_lrdt_size(buf + i);
347 u8 tag = buf[i];
348
349 i += PCI_VPD_LRDT_TAG_SIZE;
350 if (tag == rdt) {
351 if (i + lrdt_len > len)
352 lrdt_len = len - i;
353 if (size)
354 *size = lrdt_len;
355 return i;
356 }
357
358 i += lrdt_len;
359 }
360
361 return -ENOENT;
362}
363
364int pci_vpd_find_id_string(const u8 *buf, unsigned int len, unsigned int *size)
365{
366 return pci_vpd_find_tag(buf, len, PCI_VPD_LRDT_ID_STRING, size);
367}
368EXPORT_SYMBOL_GPL(pci_vpd_find_id_string);
369
370static int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off,
371 unsigned int len, const char *kw)
372{
373 int i;
374
375 for (i = off; i + PCI_VPD_INFO_FLD_HDR_SIZE <= off + len;) {
376 if (buf[i + 0] == kw[0] &&
377 buf[i + 1] == kw[1])
378 return i;
379
380 i += PCI_VPD_INFO_FLD_HDR_SIZE +
381 pci_vpd_info_field_size(&buf[i]);
382 }
383
384 return -ENOENT;
385}
386
387static ssize_t __pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf,
388 bool check_size)
389{
390 ssize_t ret;
391
392 if (dev->dev_flags & PCI_DEV_FLAGS_VPD_REF_F0) {
393 dev = pci_get_func0_dev(dev);
394 if (!dev)
395 return -ENODEV;
396
397 ret = pci_vpd_read(dev, pos, count, buf, check_size);
398 pci_dev_put(dev);
399 return ret;
400 }
401
402 return pci_vpd_read(dev, pos, count, buf, check_size);
403}
404
405/**
406 * pci_read_vpd - Read one entry from Vital Product Data
407 * @dev: PCI device struct
408 * @pos: offset in VPD space
409 * @count: number of bytes to read
410 * @buf: pointer to where to store result
411 */
412ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf)
413{
414 return __pci_read_vpd(dev, pos, count, buf, true);
415}
416EXPORT_SYMBOL(pci_read_vpd);
417
418/* Same, but allow to access any address */
419ssize_t pci_read_vpd_any(struct pci_dev *dev, loff_t pos, size_t count, void *buf)
420{
421 return __pci_read_vpd(dev, pos, count, buf, false);
422}
423EXPORT_SYMBOL(pci_read_vpd_any);
424
425static ssize_t __pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count,
426 const void *buf, bool check_size)
427{
428 ssize_t ret;
429
430 if (dev->dev_flags & PCI_DEV_FLAGS_VPD_REF_F0) {
431 dev = pci_get_func0_dev(dev);
432 if (!dev)
433 return -ENODEV;
434
435 ret = pci_vpd_write(dev, pos, count, buf, check_size);
436 pci_dev_put(dev);
437 return ret;
438 }
439
440 return pci_vpd_write(dev, pos, count, buf, check_size);
441}
442
443/**
444 * pci_write_vpd - Write entry to Vital Product Data
445 * @dev: PCI device struct
446 * @pos: offset in VPD space
447 * @count: number of bytes to write
448 * @buf: buffer containing write data
449 */
450ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf)
451{
452 return __pci_write_vpd(dev, pos, count, buf, true);
453}
454EXPORT_SYMBOL(pci_write_vpd);
455
456/* Same, but allow to access any address */
457ssize_t pci_write_vpd_any(struct pci_dev *dev, loff_t pos, size_t count, const void *buf)
458{
459 return __pci_write_vpd(dev, pos, count, buf, false);
460}
461EXPORT_SYMBOL(pci_write_vpd_any);
462
463int pci_vpd_find_ro_info_keyword(const void *buf, unsigned int len,
464 const char *kw, unsigned int *size)
465{
466 int ro_start, infokw_start;
467 unsigned int ro_len, infokw_size;
468
469 ro_start = pci_vpd_find_tag(buf, len, PCI_VPD_LRDT_RO_DATA, &ro_len);
470 if (ro_start < 0)
471 return ro_start;
472
473 infokw_start = pci_vpd_find_info_keyword(buf, ro_start, ro_len, kw);
474 if (infokw_start < 0)
475 return infokw_start;
476
477 infokw_size = pci_vpd_info_field_size(buf + infokw_start);
478 infokw_start += PCI_VPD_INFO_FLD_HDR_SIZE;
479
480 if (infokw_start + infokw_size > len)
481 return -EINVAL;
482
483 if (size)
484 *size = infokw_size;
485
486 return infokw_start;
487}
488EXPORT_SYMBOL_GPL(pci_vpd_find_ro_info_keyword);
489
490int pci_vpd_check_csum(const void *buf, unsigned int len)
491{
492 const u8 *vpd = buf;
493 unsigned int size;
494 u8 csum = 0;
495 int rv_start;
496
497 rv_start = pci_vpd_find_ro_info_keyword(buf, len, PCI_VPD_RO_KEYWORD_CHKSUM, &size);
498 if (rv_start == -ENOENT) /* no checksum in VPD */
499 return 1;
500 else if (rv_start < 0)
501 return rv_start;
502
503 if (!size)
504 return -EINVAL;
505
506 while (rv_start >= 0)
507 csum += vpd[rv_start--];
508
509 return csum ? -EILSEQ : 0;
510}
511EXPORT_SYMBOL_GPL(pci_vpd_check_csum);
512
513#ifdef CONFIG_PCI_QUIRKS
514/*
515 * Quirk non-zero PCI functions to route VPD access through function 0 for
516 * devices that share VPD resources between functions. The functions are
517 * expected to be identical devices.
518 */
519static void quirk_f0_vpd_link(struct pci_dev *dev)
520{
521 struct pci_dev *f0;
522
523 if (!PCI_FUNC(dev->devfn))
524 return;
525
526 f0 = pci_get_func0_dev(dev);
527 if (!f0)
528 return;
529
530 if (f0->vpd.cap && dev->class == f0->class &&
531 dev->vendor == f0->vendor && dev->device == f0->device)
532 dev->dev_flags |= PCI_DEV_FLAGS_VPD_REF_F0;
533
534 pci_dev_put(f0);
535}
536DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
537 PCI_CLASS_NETWORK_ETHERNET, 8, quirk_f0_vpd_link);
538
539/*
540 * If a device follows the VPD format spec, the PCI core will not read or
541 * write past the VPD End Tag. But some vendors do not follow the VPD
542 * format spec, so we can't tell how much data is safe to access. Devices
543 * may behave unpredictably if we access too much. Blacklist these devices
544 * so we don't touch VPD at all.
545 */
546static void quirk_blacklist_vpd(struct pci_dev *dev)
547{
548 dev->vpd.len = PCI_VPD_SZ_INVALID;
549 pci_warn(dev, FW_BUG "disabling VPD access (can't determine size of non-standard VPD format)\n");
550}
551DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x0060, quirk_blacklist_vpd);
552DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x007c, quirk_blacklist_vpd);
553DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x0413, quirk_blacklist_vpd);
554DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x0078, quirk_blacklist_vpd);
555DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x0079, quirk_blacklist_vpd);
556DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x0073, quirk_blacklist_vpd);
557DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x0071, quirk_blacklist_vpd);
558DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x005b, quirk_blacklist_vpd);
559DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x002f, quirk_blacklist_vpd);
560DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x005d, quirk_blacklist_vpd);
561DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd);
562DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID, quirk_blacklist_vpd);
563/*
564 * The Amazon Annapurna Labs 0x0031 device id is reused for other non Root Port
565 * device types, so the quirk is registered for the PCI_CLASS_BRIDGE_PCI class.
566 */
567DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031,
568 PCI_CLASS_BRIDGE_PCI, 8, quirk_blacklist_vpd);
569
570static void quirk_chelsio_extend_vpd(struct pci_dev *dev)
571{
572 int chip = (dev->device & 0xf000) >> 12;
573 int func = (dev->device & 0x0f00) >> 8;
574 int prod = (dev->device & 0x00ff) >> 0;
575
576 /*
577 * If this is a T3-based adapter, there's a 1KB VPD area at offset
578 * 0xc00 which contains the preferred VPD values. If this is a T4 or
579 * later based adapter, the special VPD is at offset 0x400 for the
580 * Physical Functions (the SR-IOV Virtual Functions have no VPD
581 * Capabilities). The PCI VPD Access core routines will normally
582 * compute the size of the VPD by parsing the VPD Data Structure at
583 * offset 0x000. This will result in silent failures when attempting
584 * to accesses these other VPD areas which are beyond those computed
585 * limits.
586 */
587 if (chip == 0x0 && prod >= 0x20)
588 dev->vpd.len = 8192;
589 else if (chip >= 0x4 && func < 0x8)
590 dev->vpd.len = 2048;
591}
592
593DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
594 quirk_chelsio_extend_vpd);
595
596#endif