Loading...
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
4 *
5 * Copyright (C) 2015 Atmel,
6 * 2015 Josh Wu <josh.wu@atmel.com>
7 */
8/dts-v1/;
9#include "sama5d4.dtsi"
10
11/ {
12 model = "Atmel SAMA5D4 Xplained";
13 compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
14
15 chosen {
16 stdout-path = "serial0:115200n8";
17 };
18
19 memory {
20 reg = <0x20000000 0x20000000>;
21 };
22
23 clocks {
24 slow_xtal {
25 clock-frequency = <32768>;
26 };
27
28 main_xtal {
29 clock-frequency = <12000000>;
30 };
31 };
32
33 ahb {
34 apb {
35 uart0: serial@f8004000 {
36 atmel,use-dma-rx;
37 atmel,use-dma-tx;
38 status = "okay";
39 };
40
41 spi0: spi@f8010000 {
42 cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
43 status = "okay";
44 m25p80@0 {
45 compatible = "atmel,at25df321a";
46 spi-max-frequency = <50000000>;
47 reg = <0>;
48 };
49 };
50
51 i2c0: i2c@f8014000 {
52 status = "okay";
53 };
54
55 macb0: ethernet@f8020000 {
56 phy-mode = "rmii";
57 status = "okay";
58 pinctrl-names = "default";
59 pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
60
61 phy0: ethernet-phy@1 {
62 interrupt-parent = <&pioE>;
63 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
64 reg = <1>;
65 };
66 };
67
68 mmc1: mmc@fc000000 {
69 pinctrl-names = "default";
70 pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
71 vmmc-supply = <&vcc_mmc1_reg>;
72 vqmmc-supply = <&vcc_3v3_reg>;
73 status = "okay";
74 slot@0 {
75 reg = <0>;
76 bus-width = <4>;
77 cd-gpios = <&pioE 3 0>;
78 };
79 };
80
81 usart3: serial@fc00c000 {
82 atmel,use-dma-rx;
83 atmel,use-dma-tx;
84 status = "okay";
85 };
86
87 usart4: serial@fc010000 {
88 status = "okay";
89 };
90
91 spi1: spi@fc018000 {
92 cs-gpios = <&pioB 21 0>;
93 status = "okay";
94 };
95
96 tcb2: timer@fc024000 {
97 timer0: timer@0 {
98 compatible = "atmel,tcb-timer";
99 reg = <0>;
100 };
101
102 timer1: timer@1 {
103 compatible = "atmel,tcb-timer";
104 reg = <1>;
105 };
106 };
107
108 adc0: adc@fc034000 {
109 pinctrl-names = "default";
110 pinctrl-0 = <
111 /* external trigger conflicts with USBA_VBUS */
112 &pinctrl_adc0_ad0
113 &pinctrl_adc0_ad1
114 &pinctrl_adc0_ad2
115 &pinctrl_adc0_ad3
116 &pinctrl_adc0_ad4
117 >;
118 atmel,adc-vref = <3300>;
119 status = "okay";
120 };
121
122 watchdog@fc068640 {
123 status = "okay";
124 };
125
126 pinctrl@fc06a000 {
127 board {
128 pinctrl_mmc1_cd: mmc1_cd {
129 atmel,pins =
130 <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
131 };
132 pinctrl_usba_vbus: usba_vbus {
133 atmel,pins =
134 <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
135 };
136 pinctrl_key_gpio: key_gpio_0 {
137 atmel,pins =
138 <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
139 };
140 pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
141 atmel,pins =
142 <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
143 };
144 };
145 };
146 };
147
148 usb0: gadget@400000 {
149 atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
150 pinctrl-names = "default";
151 pinctrl-0 = <&pinctrl_usba_vbus>;
152 status = "okay";
153 };
154
155 usb1: ohci@500000 {
156 num-ports = <3>;
157 atmel,vbus-gpio = <0
158 &pioE 11 GPIO_ACTIVE_HIGH
159 &pioE 14 GPIO_ACTIVE_HIGH
160 >;
161 status = "okay";
162 };
163
164 usb2: ehci@600000 {
165 status = "okay";
166 };
167
168 ebi: ebi@10000000 {
169 pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
170 &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
171 &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
172 pinctrl-names = "default";
173 status = "okay";
174
175 nand_controller: nand-controller {
176 status = "okay";
177
178 nand@3 {
179 reg = <0x3 0x0 0x2>;
180 atmel,rb = <0>;
181 nand-bus-width = <8>;
182 nand-ecc-mode = "hw";
183 nand-on-flash-bbt;
184 label = "atmel_nand";
185
186 partitions {
187 compatible = "fixed-partitions";
188 #address-cells = <1>;
189 #size-cells = <1>;
190
191 at91bootstrap@0 {
192 label = "at91bootstrap";
193 reg = <0x0 0x40000>;
194 };
195
196 bootloader@40000 {
197 label = "bootloader";
198 reg = <0x40000 0xc0000>;
199 };
200
201 bootloaderenvred@100000 {
202 label = "bootloader env redundant";
203 reg = <0x100000 0x40000>;
204 };
205
206 bootloaderenv@140000 {
207 label = "bootloader env";
208 reg = <0x140000 0x40000>;
209 };
210
211 dtb@180000 {
212 label = "device tree";
213 reg = <0x180000 0x80000>;
214 };
215
216 kernel@200000 {
217 label = "kernel";
218 reg = <0x200000 0x600000>;
219 };
220
221 rootfs@800000 {
222 label = "rootfs";
223 reg = <0x800000 0x1f800000>;
224 };
225 };
226 };
227 };
228 };
229 };
230
231 gpio_keys {
232 compatible = "gpio-keys";
233
234 pinctrl-names = "default";
235 pinctrl-0 = <&pinctrl_key_gpio>;
236
237 pb_user1 {
238 label = "pb_user1";
239 gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
240 linux,code = <0x100>;
241 wakeup-source;
242 };
243 };
244
245 leds {
246 compatible = "gpio-leds";
247 status = "okay";
248
249 d8 {
250 label = "d8";
251 gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
252 default-state = "on";
253 };
254
255 d10 {
256 label = "d10";
257 gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
258 linux,default-trigger = "heartbeat";
259 };
260 };
261
262 vcc_3v3_reg: fixedregulator_3v3 {
263 compatible = "regulator-fixed";
264 regulator-name = "VCC 3V3";
265 regulator-min-microvolt = <3300000>;
266 regulator-max-microvolt = <3300000>;
267 regulator-boot-on;
268 regulator-always-on;
269 };
270
271 vcc_mmc1_reg: fixedregulator_mmc1 {
272 compatible = "regulator-fixed";
273 gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
274 regulator-name = "VDD MCI1";
275 regulator-min-microvolt = <3300000>;
276 regulator-max-microvolt = <3300000>;
277 vin-supply = <&vcc_3v3_reg>;
278 regulator-always-on;
279 };
280};
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
4 *
5 * Copyright (C) 2015 Atmel,
6 * 2015 Josh Wu <josh.wu@atmel.com>
7 */
8/dts-v1/;
9#include "sama5d4.dtsi"
10#include <dt-bindings/input/input.h>
11
12/ {
13 model = "Atmel SAMA5D4 Xplained";
14 compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
15
16 chosen {
17 stdout-path = "serial0:115200n8";
18 };
19
20 memory@20000000 {
21 reg = <0x20000000 0x20000000>;
22 };
23
24 clocks {
25 slow_xtal {
26 clock-frequency = <32768>;
27 };
28
29 main_xtal {
30 clock-frequency = <12000000>;
31 };
32 };
33
34 ahb {
35 apb {
36 uart0: serial@f8004000 {
37 atmel,use-dma-rx;
38 atmel,use-dma-tx;
39 status = "okay";
40 };
41
42 i2c0: i2c@f8014000 {
43 i2c-digital-filter;
44 status = "okay";
45 };
46
47 macb0: ethernet@f8020000 {
48 phy-mode = "rmii";
49 status = "okay";
50 pinctrl-names = "default";
51 pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
52
53 phy0: ethernet-phy@1 {
54 interrupt-parent = <&pioE>;
55 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
56 reg = <1>;
57 };
58 };
59
60 mmc1: mmc@fc000000 {
61 pinctrl-names = "default";
62 pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
63 vmmc-supply = <&vcc_mmc1_reg>;
64 vqmmc-supply = <&vcc_3v3_reg>;
65 status = "okay";
66 slot@0 {
67 reg = <0>;
68 bus-width = <4>;
69 cd-gpios = <&pioE 3 0>;
70 };
71 };
72
73 usart3: serial@fc00c000 {
74 atmel,use-dma-rx;
75 atmel,use-dma-tx;
76 status = "okay";
77 };
78
79 usart4: serial@fc010000 {
80 status = "okay";
81 };
82
83 spi1: spi@fc018000 {
84 pinctrl-names = "default", "cs";
85 pinctrl-1 = <&pinctrl_spi1_cs>;
86 cs-gpios = <&pioB 21 0>;
87 status = "okay";
88 };
89
90 tcb2: timer@fc024000 {
91 timer0: timer@0 {
92 compatible = "atmel,tcb-timer";
93 reg = <0>;
94 };
95
96 timer1: timer@1 {
97 compatible = "atmel,tcb-timer";
98 reg = <1>;
99 };
100 };
101
102 adc0: adc@fc034000 {
103 pinctrl-names = "default";
104 pinctrl-0 = <
105 /* external trigger conflicts with USBA_VBUS */
106 &pinctrl_adc0_ad0
107 &pinctrl_adc0_ad1
108 &pinctrl_adc0_ad2
109 &pinctrl_adc0_ad3
110 &pinctrl_adc0_ad4
111 >;
112 atmel,adc-vref = <3300>;
113 status = "okay";
114 };
115
116 watchdog@fc068640 {
117 status = "okay";
118 };
119
120 pinctrl@fc06a000 {
121 board {
122 pinctrl_mmc1_cd: mmc1_cd {
123 atmel,pins =
124 <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
125 };
126 pinctrl_usba_vbus: usba_vbus {
127 atmel,pins =
128 <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
129 };
130 pinctrl_usb_default: usb_default {
131 atmel,pins =
132 <AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
133 AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
134 };
135 pinctrl_key_gpio: key_gpio_0 {
136 atmel,pins =
137 <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
138 };
139 pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
140 atmel,pins =
141 <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
142 };
143 pinctrl_spi1_cs: spi1_cs_default {
144 atmel,pins =
145 <AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
146 };
147 pinctrl_gpio_leds: gpio_leds_default {
148 atmel,pins =
149 <AT91_PIOD 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
150 AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
151 };
152 pinctrl_vcc_mmc1_reg: vcc_mmc1_reg {
153 atmel,pins =
154 <AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
155 };
156 };
157 };
158 };
159
160 usb0: gadget@400000 {
161 atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
162 pinctrl-names = "default";
163 pinctrl-0 = <&pinctrl_usba_vbus>;
164 status = "okay";
165 };
166
167 usb1: ohci@500000 {
168 num-ports = <3>;
169 atmel,vbus-gpio = <0
170 &pioE 11 GPIO_ACTIVE_HIGH
171 &pioE 14 GPIO_ACTIVE_HIGH
172 >;
173 pinctrl-names = "default";
174 pinctrl-0 = <&pinctrl_usb_default>;
175 status = "okay";
176 };
177
178 usb2: ehci@600000 {
179 status = "okay";
180 };
181
182 ebi: ebi@10000000 {
183 pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
184 &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
185 &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
186 pinctrl-names = "default";
187 status = "okay";
188
189 nand_controller: nand-controller {
190 status = "okay";
191
192 nand@3 {
193 reg = <0x3 0x0 0x2>;
194 atmel,rb = <0>;
195 nand-bus-width = <8>;
196 nand-ecc-mode = "hw";
197 nand-on-flash-bbt;
198 label = "atmel_nand";
199
200 partitions {
201 compatible = "fixed-partitions";
202 #address-cells = <1>;
203 #size-cells = <1>;
204
205 at91bootstrap@0 {
206 label = "at91bootstrap";
207 reg = <0x0 0x40000>;
208 };
209
210 bootloader@40000 {
211 label = "bootloader";
212 reg = <0x40000 0xc0000>;
213 };
214
215 bootloaderenvred@100000 {
216 label = "bootloader env redundant";
217 reg = <0x100000 0x40000>;
218 };
219
220 bootloaderenv@140000 {
221 label = "bootloader env";
222 reg = <0x140000 0x40000>;
223 };
224
225 dtb@180000 {
226 label = "device tree";
227 reg = <0x180000 0x80000>;
228 };
229
230 kernel@200000 {
231 label = "kernel";
232 reg = <0x200000 0x600000>;
233 };
234
235 rootfs@800000 {
236 label = "rootfs";
237 reg = <0x800000 0x1f800000>;
238 };
239 };
240 };
241 };
242 };
243 };
244
245 gpio-keys {
246 compatible = "gpio-keys";
247
248 pinctrl-names = "default";
249 pinctrl-0 = <&pinctrl_key_gpio>;
250
251 button {
252 label = "pb_user1";
253 gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
254 linux,code = <KEY_PROG1>;
255 wakeup-source;
256 };
257 };
258
259 leds {
260 compatible = "gpio-leds";
261 pinctrl-names = "default";
262 pinctrl-0 = <&pinctrl_gpio_leds>;
263 status = "okay";
264
265 d8 {
266 label = "d8";
267 gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
268 default-state = "on";
269 };
270
271 d10 {
272 label = "d10";
273 gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
274 linux,default-trigger = "heartbeat";
275 };
276 };
277
278 vcc_3v3_reg: fixedregulator_3v3 {
279 compatible = "regulator-fixed";
280 regulator-name = "VCC 3V3";
281 regulator-min-microvolt = <3300000>;
282 regulator-max-microvolt = <3300000>;
283 regulator-boot-on;
284 regulator-always-on;
285 };
286
287 vcc_mmc1_reg: fixedregulator_mmc1 {
288 compatible = "regulator-fixed";
289 pinctrl-names = "default";
290 pinctrl-0 = <&pinctrl_vcc_mmc1_reg>;
291 gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
292 regulator-name = "VDD MCI1";
293 regulator-min-microvolt = <3300000>;
294 regulator-max-microvolt = <3300000>;
295 vin-supply = <&vcc_3v3_reg>;
296 regulator-always-on;
297 };
298};