Loading...
1/*
2 * net/tipc/bearer.h: Include file for TIPC bearer code
3 *
4 * Copyright (c) 1996-2006, 2013-2016, Ericsson AB
5 * Copyright (c) 2005, 2010-2011, Wind River Systems
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
10 *
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
19 *
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
35 */
36
37#ifndef _TIPC_BEARER_H
38#define _TIPC_BEARER_H
39
40#include "netlink.h"
41#include "core.h"
42#include "msg.h"
43#include <net/genetlink.h>
44
45#define MAX_MEDIA 3
46
47/* Identifiers associated with TIPC message header media address info
48 * - address info field is 32 bytes long
49 * - the field's actual content and length is defined per media
50 * - remaining unused bytes in the field are set to zero
51 */
52#define TIPC_MEDIA_INFO_SIZE 32
53#define TIPC_MEDIA_TYPE_OFFSET 3
54#define TIPC_MEDIA_ADDR_OFFSET 4
55
56/*
57 * Identifiers of supported TIPC media types
58 */
59#define TIPC_MEDIA_TYPE_ETH 1
60#define TIPC_MEDIA_TYPE_IB 2
61#define TIPC_MEDIA_TYPE_UDP 3
62
63/* Minimum bearer MTU */
64#define TIPC_MIN_BEARER_MTU (MAX_H_SIZE + INT_H_SIZE)
65
66/* Identifiers for distinguishing between broadcast/multicast and replicast
67 */
68#define TIPC_BROADCAST_SUPPORT 1
69#define TIPC_REPLICAST_SUPPORT 2
70
71/**
72 * struct tipc_media_addr - destination address used by TIPC bearers
73 * @value: address info (format defined by media)
74 * @media_id: TIPC media type identifier
75 * @broadcast: non-zero if address is a broadcast address
76 */
77struct tipc_media_addr {
78 u8 value[TIPC_MEDIA_INFO_SIZE];
79 u8 media_id;
80 u8 broadcast;
81};
82
83struct tipc_bearer;
84
85/**
86 * struct tipc_media - Media specific info exposed to generic bearer layer
87 * @send_msg: routine which handles buffer transmission
88 * @enable_media: routine which enables a media
89 * @disable_media: routine which disables a media
90 * @addr2str: convert media address format to string
91 * @addr2msg: convert from media addr format to discovery msg addr format
92 * @msg2addr: convert from discovery msg addr format to media addr format
93 * @raw2addr: convert from raw addr format to media addr format
94 * @priority: default link (and bearer) priority
95 * @tolerance: default time (in ms) before declaring link failure
96 * @window: default window (in packets) before declaring link congestion
97 * @mtu: max packet size bearer can support for media type not dependent on
98 * underlying device MTU
99 * @type_id: TIPC media identifier
100 * @hwaddr_len: TIPC media address len
101 * @name: media name
102 */
103struct tipc_media {
104 int (*send_msg)(struct net *net, struct sk_buff *buf,
105 struct tipc_bearer *b,
106 struct tipc_media_addr *dest);
107 int (*enable_media)(struct net *net, struct tipc_bearer *b,
108 struct nlattr *attr[]);
109 void (*disable_media)(struct tipc_bearer *b);
110 int (*addr2str)(struct tipc_media_addr *addr,
111 char *strbuf,
112 int bufsz);
113 int (*addr2msg)(char *msg, struct tipc_media_addr *addr);
114 int (*msg2addr)(struct tipc_bearer *b,
115 struct tipc_media_addr *addr,
116 char *msg);
117 int (*raw2addr)(struct tipc_bearer *b,
118 struct tipc_media_addr *addr,
119 char *raw);
120 u32 priority;
121 u32 tolerance;
122 u32 window;
123 u32 mtu;
124 u32 type_id;
125 u32 hwaddr_len;
126 char name[TIPC_MAX_MEDIA_NAME];
127};
128
129/**
130 * struct tipc_bearer - Generic TIPC bearer structure
131 * @media_ptr: pointer to additional media-specific information about bearer
132 * @mtu: max packet size bearer can support
133 * @addr: media-specific address associated with bearer
134 * @name: bearer name (format = media:interface)
135 * @media: ptr to media structure associated with bearer
136 * @bcast_addr: media address used in broadcasting
137 * @pt: packet type for bearer
138 * @rcu: rcu struct for tipc_bearer
139 * @priority: default link priority for bearer
140 * @window: default window size for bearer
141 * @tolerance: default link tolerance for bearer
142 * @domain: network domain to which links can be established
143 * @identity: array index of this bearer within TIPC bearer array
144 * @link_req: ptr to (optional) structure making periodic link setup requests
145 * @net_plane: network plane ('A' through 'H') currently associated with bearer
146 *
147 * Note: media-specific code is responsible for initialization of the fields
148 * indicated below when a bearer is enabled; TIPC's generic bearer code takes
149 * care of initializing all other fields.
150 */
151struct tipc_bearer {
152 void __rcu *media_ptr; /* initalized by media */
153 u32 mtu; /* initalized by media */
154 struct tipc_media_addr addr; /* initalized by media */
155 char name[TIPC_MAX_BEARER_NAME];
156 struct tipc_media *media;
157 struct tipc_media_addr bcast_addr;
158 struct packet_type pt;
159 struct rcu_head rcu;
160 u32 priority;
161 u32 window;
162 u32 tolerance;
163 u32 domain;
164 u32 identity;
165 struct tipc_discoverer *disc;
166 char net_plane;
167 unsigned long up;
168};
169
170struct tipc_bearer_names {
171 char media_name[TIPC_MAX_MEDIA_NAME];
172 char if_name[TIPC_MAX_IF_NAME];
173};
174
175/*
176 * TIPC routines available to supported media types
177 */
178
179void tipc_rcv(struct net *net, struct sk_buff *skb, struct tipc_bearer *b);
180
181/*
182 * Routines made available to TIPC by supported media types
183 */
184extern struct tipc_media eth_media_info;
185
186#ifdef CONFIG_TIPC_MEDIA_IB
187extern struct tipc_media ib_media_info;
188#endif
189#ifdef CONFIG_TIPC_MEDIA_UDP
190extern struct tipc_media udp_media_info;
191#endif
192
193int tipc_nl_bearer_disable(struct sk_buff *skb, struct genl_info *info);
194int __tipc_nl_bearer_disable(struct sk_buff *skb, struct genl_info *info);
195int tipc_nl_bearer_enable(struct sk_buff *skb, struct genl_info *info);
196int __tipc_nl_bearer_enable(struct sk_buff *skb, struct genl_info *info);
197int tipc_nl_bearer_dump(struct sk_buff *skb, struct netlink_callback *cb);
198int tipc_nl_bearer_get(struct sk_buff *skb, struct genl_info *info);
199int tipc_nl_bearer_set(struct sk_buff *skb, struct genl_info *info);
200int __tipc_nl_bearer_set(struct sk_buff *skb, struct genl_info *info);
201int tipc_nl_bearer_add(struct sk_buff *skb, struct genl_info *info);
202
203int tipc_nl_media_dump(struct sk_buff *skb, struct netlink_callback *cb);
204int tipc_nl_media_get(struct sk_buff *skb, struct genl_info *info);
205int tipc_nl_media_set(struct sk_buff *skb, struct genl_info *info);
206int __tipc_nl_media_set(struct sk_buff *skb, struct genl_info *info);
207
208int tipc_media_set_priority(const char *name, u32 new_value);
209int tipc_media_set_window(const char *name, u32 new_value);
210int tipc_media_addr_printf(char *buf, int len, struct tipc_media_addr *a);
211int tipc_enable_l2_media(struct net *net, struct tipc_bearer *b,
212 struct nlattr *attrs[]);
213void tipc_disable_l2_media(struct tipc_bearer *b);
214int tipc_l2_send_msg(struct net *net, struct sk_buff *buf,
215 struct tipc_bearer *b, struct tipc_media_addr *dest);
216
217void tipc_bearer_add_dest(struct net *net, u32 bearer_id, u32 dest);
218void tipc_bearer_remove_dest(struct net *net, u32 bearer_id, u32 dest);
219struct tipc_bearer *tipc_bearer_find(struct net *net, const char *name);
220int tipc_bearer_get_name(struct net *net, char *name, u32 bearer_id);
221struct tipc_media *tipc_media_find(const char *name);
222int tipc_bearer_setup(void);
223void tipc_bearer_cleanup(void);
224void tipc_bearer_stop(struct net *net);
225int tipc_bearer_mtu(struct net *net, u32 bearer_id);
226bool tipc_bearer_bcast_support(struct net *net, u32 bearer_id);
227void tipc_bearer_xmit_skb(struct net *net, u32 bearer_id,
228 struct sk_buff *skb,
229 struct tipc_media_addr *dest);
230void tipc_bearer_xmit(struct net *net, u32 bearer_id,
231 struct sk_buff_head *xmitq,
232 struct tipc_media_addr *dst);
233void tipc_bearer_bc_xmit(struct net *net, u32 bearer_id,
234 struct sk_buff_head *xmitq);
235void tipc_clone_to_loopback(struct net *net, struct sk_buff_head *pkts);
236int tipc_attach_loopback(struct net *net);
237void tipc_detach_loopback(struct net *net);
238
239static inline void tipc_loopback_trace(struct net *net,
240 struct sk_buff_head *pkts)
241{
242 if (unlikely(dev_nit_active(net->loopback_dev)))
243 tipc_clone_to_loopback(net, pkts);
244}
245
246/* check if device MTU is too low for tipc headers */
247static inline bool tipc_mtu_bad(struct net_device *dev, unsigned int reserve)
248{
249 if (dev->mtu >= TIPC_MIN_BEARER_MTU + reserve)
250 return false;
251 netdev_warn(dev, "MTU too low for tipc bearer\n");
252 return true;
253}
254
255#endif /* _TIPC_BEARER_H */
1/*
2 * net/tipc/bearer.h: Include file for TIPC bearer code
3 *
4 * Copyright (c) 1996-2006, 2013-2016, Ericsson AB
5 * Copyright (c) 2005, 2010-2011, Wind River Systems
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
10 *
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
19 *
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
35 */
36
37#ifndef _TIPC_BEARER_H
38#define _TIPC_BEARER_H
39
40#include "netlink.h"
41#include "core.h"
42#include "msg.h"
43#include <net/genetlink.h>
44
45#define MAX_MEDIA 3
46
47/* Identifiers associated with TIPC message header media address info
48 * - address info field is 32 bytes long
49 * - the field's actual content and length is defined per media
50 * - remaining unused bytes in the field are set to zero
51 */
52#define TIPC_MEDIA_INFO_SIZE 32
53#define TIPC_MEDIA_TYPE_OFFSET 3
54#define TIPC_MEDIA_ADDR_OFFSET 4
55
56/*
57 * Identifiers of supported TIPC media types
58 */
59#define TIPC_MEDIA_TYPE_ETH 1
60#define TIPC_MEDIA_TYPE_IB 2
61#define TIPC_MEDIA_TYPE_UDP 3
62
63/* Minimum bearer MTU */
64#define TIPC_MIN_BEARER_MTU (MAX_H_SIZE + INT_H_SIZE)
65
66/* Identifiers for distinguishing between broadcast/multicast and replicast
67 */
68#define TIPC_BROADCAST_SUPPORT 1
69#define TIPC_REPLICAST_SUPPORT 2
70
71/**
72 * struct tipc_media_addr - destination address used by TIPC bearers
73 * @value: address info (format defined by media)
74 * @media_id: TIPC media type identifier
75 * @broadcast: non-zero if address is a broadcast address
76 */
77struct tipc_media_addr {
78 u8 value[TIPC_MEDIA_INFO_SIZE];
79 u8 media_id;
80 u8 broadcast;
81};
82
83struct tipc_bearer;
84
85/**
86 * struct tipc_media - Media specific info exposed to generic bearer layer
87 * @send_msg: routine which handles buffer transmission
88 * @enable_media: routine which enables a media
89 * @disable_media: routine which disables a media
90 * @addr2str: convert media address format to string
91 * @addr2msg: convert from media addr format to discovery msg addr format
92 * @msg2addr: convert from discovery msg addr format to media addr format
93 * @raw2addr: convert from raw addr format to media addr format
94 * @priority: default link (and bearer) priority
95 * @tolerance: default time (in ms) before declaring link failure
96 * @min_win: minimum window (in packets) before declaring link congestion
97 * @max_win: maximum window (in packets) before declaring link congestion
98 * @mtu: max packet size bearer can support for media type not dependent on
99 * underlying device MTU
100 * @type_id: TIPC media identifier
101 * @hwaddr_len: TIPC media address len
102 * @name: media name
103 */
104struct tipc_media {
105 int (*send_msg)(struct net *net, struct sk_buff *buf,
106 struct tipc_bearer *b,
107 struct tipc_media_addr *dest);
108 int (*enable_media)(struct net *net, struct tipc_bearer *b,
109 struct nlattr *attr[]);
110 void (*disable_media)(struct tipc_bearer *b);
111 int (*addr2str)(struct tipc_media_addr *addr,
112 char *strbuf,
113 int bufsz);
114 int (*addr2msg)(char *msg, struct tipc_media_addr *addr);
115 int (*msg2addr)(struct tipc_bearer *b,
116 struct tipc_media_addr *addr,
117 char *msg);
118 int (*raw2addr)(struct tipc_bearer *b,
119 struct tipc_media_addr *addr,
120 const char *raw);
121 u32 priority;
122 u32 tolerance;
123 u32 min_win;
124 u32 max_win;
125 u32 mtu;
126 u32 type_id;
127 u32 hwaddr_len;
128 char name[TIPC_MAX_MEDIA_NAME];
129};
130
131/**
132 * struct tipc_bearer - Generic TIPC bearer structure
133 * @media_ptr: pointer to additional media-specific information about bearer
134 * @mtu: max packet size bearer can support
135 * @addr: media-specific address associated with bearer
136 * @name: bearer name (format = media:interface)
137 * @media: ptr to media structure associated with bearer
138 * @bcast_addr: media address used in broadcasting
139 * @pt: packet type for bearer
140 * @rcu: rcu struct for tipc_bearer
141 * @priority: default link priority for bearer
142 * @min_win: minimum window (in packets) before declaring link congestion
143 * @max_win: maximum window (in packets) before declaring link congestion
144 * @tolerance: default link tolerance for bearer
145 * @domain: network domain to which links can be established
146 * @identity: array index of this bearer within TIPC bearer array
147 * @disc: ptr to link setup request
148 * @net_plane: network plane ('A' through 'H') currently associated with bearer
149 * @encap_hlen: encap headers length
150 * @up: bearer up flag (bit 0)
151 * @refcnt: tipc_bearer reference counter
152 *
153 * Note: media-specific code is responsible for initialization of the fields
154 * indicated below when a bearer is enabled; TIPC's generic bearer code takes
155 * care of initializing all other fields.
156 */
157struct tipc_bearer {
158 void __rcu *media_ptr; /* initialized by media */
159 u32 mtu; /* initialized by media */
160 struct tipc_media_addr addr; /* initialized by media */
161 char name[TIPC_MAX_BEARER_NAME];
162 struct tipc_media *media;
163 struct tipc_media_addr bcast_addr;
164 struct packet_type pt;
165 struct rcu_head rcu;
166 u32 priority;
167 u32 min_win;
168 u32 max_win;
169 u32 tolerance;
170 u32 domain;
171 u32 identity;
172 struct tipc_discoverer *disc;
173 char net_plane;
174 u16 encap_hlen;
175 unsigned long up;
176 refcount_t refcnt;
177};
178
179struct tipc_bearer_names {
180 char media_name[TIPC_MAX_MEDIA_NAME];
181 char if_name[TIPC_MAX_IF_NAME];
182};
183
184/*
185 * TIPC routines available to supported media types
186 */
187
188void tipc_rcv(struct net *net, struct sk_buff *skb, struct tipc_bearer *b);
189
190/*
191 * Routines made available to TIPC by supported media types
192 */
193extern struct tipc_media eth_media_info;
194
195#ifdef CONFIG_TIPC_MEDIA_IB
196extern struct tipc_media ib_media_info;
197#endif
198#ifdef CONFIG_TIPC_MEDIA_UDP
199extern struct tipc_media udp_media_info;
200#endif
201
202int tipc_nl_bearer_disable(struct sk_buff *skb, struct genl_info *info);
203int __tipc_nl_bearer_disable(struct sk_buff *skb, struct genl_info *info);
204int tipc_nl_bearer_enable(struct sk_buff *skb, struct genl_info *info);
205int __tipc_nl_bearer_enable(struct sk_buff *skb, struct genl_info *info);
206int tipc_nl_bearer_dump(struct sk_buff *skb, struct netlink_callback *cb);
207int tipc_nl_bearer_get(struct sk_buff *skb, struct genl_info *info);
208int tipc_nl_bearer_set(struct sk_buff *skb, struct genl_info *info);
209int __tipc_nl_bearer_set(struct sk_buff *skb, struct genl_info *info);
210int tipc_nl_bearer_add(struct sk_buff *skb, struct genl_info *info);
211
212int tipc_nl_media_dump(struct sk_buff *skb, struct netlink_callback *cb);
213int tipc_nl_media_get(struct sk_buff *skb, struct genl_info *info);
214int tipc_nl_media_set(struct sk_buff *skb, struct genl_info *info);
215int __tipc_nl_media_set(struct sk_buff *skb, struct genl_info *info);
216
217int tipc_media_addr_printf(char *buf, int len, struct tipc_media_addr *a);
218int tipc_enable_l2_media(struct net *net, struct tipc_bearer *b,
219 struct nlattr *attrs[]);
220bool tipc_bearer_hold(struct tipc_bearer *b);
221void tipc_bearer_put(struct tipc_bearer *b);
222void tipc_disable_l2_media(struct tipc_bearer *b);
223int tipc_l2_send_msg(struct net *net, struct sk_buff *buf,
224 struct tipc_bearer *b, struct tipc_media_addr *dest);
225
226void tipc_bearer_add_dest(struct net *net, u32 bearer_id, u32 dest);
227void tipc_bearer_remove_dest(struct net *net, u32 bearer_id, u32 dest);
228struct tipc_bearer *tipc_bearer_find(struct net *net, const char *name);
229int tipc_bearer_get_name(struct net *net, char *name, u32 bearer_id);
230struct tipc_media *tipc_media_find(const char *name);
231int tipc_bearer_setup(void);
232void tipc_bearer_cleanup(void);
233void tipc_bearer_stop(struct net *net);
234int tipc_bearer_mtu(struct net *net, u32 bearer_id);
235int tipc_bearer_min_mtu(struct net *net, u32 bearer_id);
236bool tipc_bearer_bcast_support(struct net *net, u32 bearer_id);
237void tipc_bearer_xmit_skb(struct net *net, u32 bearer_id,
238 struct sk_buff *skb,
239 struct tipc_media_addr *dest);
240void tipc_bearer_xmit(struct net *net, u32 bearer_id,
241 struct sk_buff_head *xmitq,
242 struct tipc_media_addr *dst,
243 struct tipc_node *__dnode);
244void tipc_bearer_bc_xmit(struct net *net, u32 bearer_id,
245 struct sk_buff_head *xmitq);
246void tipc_clone_to_loopback(struct net *net, struct sk_buff_head *pkts);
247int tipc_attach_loopback(struct net *net);
248void tipc_detach_loopback(struct net *net);
249
250static inline void tipc_loopback_trace(struct net *net,
251 struct sk_buff_head *pkts)
252{
253 if (unlikely(dev_nit_active(net->loopback_dev)))
254 tipc_clone_to_loopback(net, pkts);
255}
256
257/* check if device MTU is too low for tipc headers */
258static inline bool tipc_mtu_bad(struct net_device *dev)
259{
260 if (dev->mtu >= TIPC_MIN_BEARER_MTU)
261 return false;
262 netdev_warn(dev, "MTU too low for tipc bearer\n");
263 return true;
264}
265
266#endif /* _TIPC_BEARER_H */