Linux Audio

Check our new training course

Embedded Linux training

Mar 10-20, 2025, special US time zones
Register
Loading...
v5.4
 1/*
 2 *  BSD LICENSE
 3 *
 4 *  Copyright(c) 2017 Broadcom Corporation.  All rights reserved.
 5 *
 6 *  Redistribution and use in source and binary forms, with or without
 7 *  modification, are permitted provided that the following conditions
 8 *  are met:
 9 *
10 *    * Redistributions of source code must retain the above copyright
11 *      notice, this list of conditions and the following disclaimer.
12 *    * Redistributions in binary form must reproduce the above copyright
13 *      notice, this list of conditions and the following disclaimer in
14 *      the documentation and/or other materials provided with the
15 *      distribution.
16 *    * Neither the name of Broadcom Corporation nor the names of its
17 *      contributors may be used to endorse or promote products derived
18 *      from this software without specific prior written permission.
19 *
20 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33#ifndef __DT_BINDINGS_PINCTRL_BRCM_STINGRAY_H__
34#define __DT_BINDINGS_PINCTRL_BRCM_STINGRAY_H__
35
36/* Alternate functions available in MUX controller */
37#define MODE_NITRO				0
38#define MODE_NAND				1
39#define MODE_PNOR				2
40#define MODE_GPIO				3
41
42/* Pad configuration attribute */
43#define PAD_SLEW_RATE_ENA			(1 << 0)
44#define PAD_SLEW_RATE_ENA_MASK			(1 << 0)
45
46#define PAD_DRIVE_STRENGTH_2_MA			(0 << 1)
47#define PAD_DRIVE_STRENGTH_4_MA			(1 << 1)
48#define PAD_DRIVE_STRENGTH_6_MA			(2 << 1)
49#define PAD_DRIVE_STRENGTH_8_MA			(3 << 1)
50#define PAD_DRIVE_STRENGTH_10_MA		(4 << 1)
51#define PAD_DRIVE_STRENGTH_12_MA		(5 << 1)
52#define PAD_DRIVE_STRENGTH_14_MA		(6 << 1)
53#define PAD_DRIVE_STRENGTH_16_MA		(7 << 1)
54#define PAD_DRIVE_STRENGTH_MASK			(7 << 1)
55
56#define PAD_PULL_UP_ENA				(1 << 4)
57#define PAD_PULL_UP_ENA_MASK			(1 << 4)
58
59#define PAD_PULL_DOWN_ENA			(1 << 5)
60#define PAD_PULL_DOWN_ENA_MASK			(1 << 5)
61
62#define PAD_INPUT_PATH_DIS			(1 << 6)
63#define PAD_INPUT_PATH_DIS_MASK			(1 << 6)
64
65#define PAD_HYSTERESIS_ENA			(1 << 7)
66#define PAD_HYSTERESIS_ENA_MASK			(1 << 7)
67
68#endif
v6.13.7
 1/*
 2 *  BSD LICENSE
 3 *
 4 *  Copyright(c) 2017 Broadcom Corporation.  All rights reserved.
 5 *
 6 *  Redistribution and use in source and binary forms, with or without
 7 *  modification, are permitted provided that the following conditions
 8 *  are met:
 9 *
10 *    * Redistributions of source code must retain the above copyright
11 *      notice, this list of conditions and the following disclaimer.
12 *    * Redistributions in binary form must reproduce the above copyright
13 *      notice, this list of conditions and the following disclaimer in
14 *      the documentation and/or other materials provided with the
15 *      distribution.
16 *    * Neither the name of Broadcom Corporation nor the names of its
17 *      contributors may be used to endorse or promote products derived
18 *      from this software without specific prior written permission.
19 *
20 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33#ifndef __DT_BINDINGS_PINCTRL_BRCM_STINGRAY_H__
34#define __DT_BINDINGS_PINCTRL_BRCM_STINGRAY_H__
35
36/* Alternate functions available in MUX controller */
37#define MODE_NITRO				0
38#define MODE_NAND				1
39#define MODE_PNOR				2
40#define MODE_GPIO				3
41
42/* Pad configuration attribute */
43#define PAD_SLEW_RATE_ENA			(1 << 0)
44#define PAD_SLEW_RATE_ENA_MASK			(1 << 0)
45
46#define PAD_DRIVE_STRENGTH_2_MA			(0 << 1)
47#define PAD_DRIVE_STRENGTH_4_MA			(1 << 1)
48#define PAD_DRIVE_STRENGTH_6_MA			(2 << 1)
49#define PAD_DRIVE_STRENGTH_8_MA			(3 << 1)
50#define PAD_DRIVE_STRENGTH_10_MA		(4 << 1)
51#define PAD_DRIVE_STRENGTH_12_MA		(5 << 1)
52#define PAD_DRIVE_STRENGTH_14_MA		(6 << 1)
53#define PAD_DRIVE_STRENGTH_16_MA		(7 << 1)
54#define PAD_DRIVE_STRENGTH_MASK			(7 << 1)
55
56#define PAD_PULL_UP_ENA				(1 << 4)
57#define PAD_PULL_UP_ENA_MASK			(1 << 4)
58
59#define PAD_PULL_DOWN_ENA			(1 << 5)
60#define PAD_PULL_DOWN_ENA_MASK			(1 << 5)
61
62#define PAD_INPUT_PATH_DIS			(1 << 6)
63#define PAD_INPUT_PATH_DIS_MASK			(1 << 6)
64
65#define PAD_HYSTERESIS_ENA			(1 << 7)
66#define PAD_HYSTERESIS_ENA_MASK			(1 << 7)
67
68#endif