Linux Audio

Check our new training course

Loading...
v5.4
  1// SPDX-License-Identifier: GPL-2.0+
  2/*
  3 * PCI Express Hot Plug Controller Driver
  4 *
  5 * Copyright (C) 1995,2001 Compaq Computer Corporation
  6 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
  7 * Copyright (C) 2001 IBM Corp.
  8 * Copyright (C) 2003-2004 Intel Corporation
  9 *
 10 * All rights reserved.
 11 *
 12 * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
 13 *
 14 */
 15
 16#define dev_fmt(fmt) "pciehp: " fmt
 17
 18#include <linux/kernel.h>
 19#include <linux/types.h>
 20#include <linux/pci.h>
 21#include "../pci.h"
 22#include "pciehp.h"
 23
 24/**
 25 * pciehp_configure_device() - enumerate PCI devices below a hotplug bridge
 26 * @ctrl: PCIe hotplug controller
 27 *
 28 * Enumerate PCI devices below a hotplug bridge and add them to the system.
 29 * Return 0 on success, %-EEXIST if the devices are already enumerated or
 30 * %-ENODEV if enumeration failed.
 31 */
 32int pciehp_configure_device(struct controller *ctrl)
 33{
 34	struct pci_dev *dev;
 35	struct pci_dev *bridge = ctrl->pcie->port;
 36	struct pci_bus *parent = bridge->subordinate;
 37	int num, ret = 0;
 38
 39	pci_lock_rescan_remove();
 40
 41	dev = pci_get_slot(parent, PCI_DEVFN(0, 0));
 42	if (dev) {
 43		/*
 44		 * The device is already there. Either configured by the
 45		 * boot firmware or a previous hotplug event.
 46		 */
 47		ctrl_dbg(ctrl, "Device %s already exists at %04x:%02x:00, skipping hot-add\n",
 48			 pci_name(dev), pci_domain_nr(parent), parent->number);
 49		pci_dev_put(dev);
 50		ret = -EEXIST;
 51		goto out;
 52	}
 53
 54	num = pci_scan_slot(parent, PCI_DEVFN(0, 0));
 55	if (num == 0) {
 56		ctrl_err(ctrl, "No new device found\n");
 57		ret = -ENODEV;
 58		goto out;
 59	}
 60
 61	for_each_pci_bridge(dev, parent)
 62		pci_hp_add_bridge(dev);
 63
 64	pci_assign_unassigned_bridge_resources(bridge);
 65	pcie_bus_configure_settings(parent);
 
 
 
 
 
 
 66	pci_bus_add_devices(parent);
 
 
 
 
 
 67
 68 out:
 69	pci_unlock_rescan_remove();
 70	return ret;
 71}
 72
 73/**
 74 * pciehp_unconfigure_device() - remove PCI devices below a hotplug bridge
 75 * @ctrl: PCIe hotplug controller
 76 * @presence: whether the card is still present in the slot;
 77 *	true for safe removal via sysfs or an Attention Button press,
 78 *	false for surprise removal
 79 *
 80 * Unbind PCI devices below a hotplug bridge from their drivers and remove
 81 * them from the system.  Safely removed devices are quiesced.  Surprise
 82 * removed devices are marked as such to prevent further accesses.
 83 */
 84void pciehp_unconfigure_device(struct controller *ctrl, bool presence)
 85{
 86	struct pci_dev *dev, *temp;
 87	struct pci_bus *parent = ctrl->pcie->port->subordinate;
 88	u16 command;
 89
 90	ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:00\n",
 91		 __func__, pci_domain_nr(parent), parent->number);
 92
 93	if (!presence)
 94		pci_walk_bus(parent, pci_dev_set_disconnected, NULL);
 95
 96	pci_lock_rescan_remove();
 97
 98	/*
 99	 * Stopping an SR-IOV PF device removes all the associated VFs,
100	 * which will update the bus->devices list and confuse the
101	 * iterator.  Therefore, iterate in reverse so we remove the VFs
102	 * first, then the PF.  We do the same in pci_stop_bus_device().
103	 */
104	list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
105					 bus_list) {
106		pci_dev_get(dev);
 
 
 
 
 
 
107		pci_stop_and_remove_bus_device(dev);
 
 
108		/*
109		 * Ensure that no new Requests will be generated from
110		 * the device.
111		 */
112		if (presence) {
113			pci_read_config_word(dev, PCI_COMMAND, &command);
114			command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
115			command |= PCI_COMMAND_INTX_DISABLE;
116			pci_write_config_word(dev, PCI_COMMAND, command);
117		}
118		pci_dev_put(dev);
119	}
120
121	pci_unlock_rescan_remove();
122}
v6.13.7
  1// SPDX-License-Identifier: GPL-2.0+
  2/*
  3 * PCI Express Hot Plug Controller Driver
  4 *
  5 * Copyright (C) 1995,2001 Compaq Computer Corporation
  6 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
  7 * Copyright (C) 2001 IBM Corp.
  8 * Copyright (C) 2003-2004 Intel Corporation
  9 *
 10 * All rights reserved.
 11 *
 12 * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
 13 *
 14 */
 15
 16#define dev_fmt(fmt) "pciehp: " fmt
 17
 18#include <linux/kernel.h>
 19#include <linux/types.h>
 20#include <linux/pci.h>
 21#include "../pci.h"
 22#include "pciehp.h"
 23
 24/**
 25 * pciehp_configure_device() - enumerate PCI devices below a hotplug bridge
 26 * @ctrl: PCIe hotplug controller
 27 *
 28 * Enumerate PCI devices below a hotplug bridge and add them to the system.
 29 * Return 0 on success, %-EEXIST if the devices are already enumerated or
 30 * %-ENODEV if enumeration failed.
 31 */
 32int pciehp_configure_device(struct controller *ctrl)
 33{
 34	struct pci_dev *dev;
 35	struct pci_dev *bridge = ctrl->pcie->port;
 36	struct pci_bus *parent = bridge->subordinate;
 37	int num, ret = 0;
 38
 39	pci_lock_rescan_remove();
 40
 41	dev = pci_get_slot(parent, PCI_DEVFN(0, 0));
 42	if (dev) {
 43		/*
 44		 * The device is already there. Either configured by the
 45		 * boot firmware or a previous hotplug event.
 46		 */
 47		ctrl_dbg(ctrl, "Device %s already exists at %04x:%02x:00, skipping hot-add\n",
 48			 pci_name(dev), pci_domain_nr(parent), parent->number);
 49		pci_dev_put(dev);
 50		ret = -EEXIST;
 51		goto out;
 52	}
 53
 54	num = pci_scan_slot(parent, PCI_DEVFN(0, 0));
 55	if (num == 0) {
 56		ctrl_err(ctrl, "No new device found\n");
 57		ret = -ENODEV;
 58		goto out;
 59	}
 60
 61	for_each_pci_bridge(dev, parent)
 62		pci_hp_add_bridge(dev);
 63
 64	pci_assign_unassigned_bridge_resources(bridge);
 65	pcie_bus_configure_settings(parent);
 66
 67	/*
 68	 * Release reset_lock during driver binding
 69	 * to avoid AB-BA deadlock with device_lock.
 70	 */
 71	up_read(&ctrl->reset_lock);
 72	pci_bus_add_devices(parent);
 73	down_read_nested(&ctrl->reset_lock, ctrl->depth);
 74
 75	dev = pci_get_slot(parent, PCI_DEVFN(0, 0));
 76	ctrl->dsn = pci_get_dsn(dev);
 77	pci_dev_put(dev);
 78
 79 out:
 80	pci_unlock_rescan_remove();
 81	return ret;
 82}
 83
 84/**
 85 * pciehp_unconfigure_device() - remove PCI devices below a hotplug bridge
 86 * @ctrl: PCIe hotplug controller
 87 * @presence: whether the card is still present in the slot;
 88 *	true for safe removal via sysfs or an Attention Button press,
 89 *	false for surprise removal
 90 *
 91 * Unbind PCI devices below a hotplug bridge from their drivers and remove
 92 * them from the system.  Safely removed devices are quiesced.  Surprise
 93 * removed devices are marked as such to prevent further accesses.
 94 */
 95void pciehp_unconfigure_device(struct controller *ctrl, bool presence)
 96{
 97	struct pci_dev *dev, *temp;
 98	struct pci_bus *parent = ctrl->pcie->port->subordinate;
 99	u16 command;
100
101	ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:00\n",
102		 __func__, pci_domain_nr(parent), parent->number);
103
104	if (!presence)
105		pci_walk_bus(parent, pci_dev_set_disconnected, NULL);
106
107	pci_lock_rescan_remove();
108
109	/*
110	 * Stopping an SR-IOV PF device removes all the associated VFs,
111	 * which will update the bus->devices list and confuse the
112	 * iterator.  Therefore, iterate in reverse so we remove the VFs
113	 * first, then the PF.  We do the same in pci_stop_bus_device().
114	 */
115	list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
116					 bus_list) {
117		pci_dev_get(dev);
118
119		/*
120		 * Release reset_lock during driver unbinding
121		 * to avoid AB-BA deadlock with device_lock.
122		 */
123		up_read(&ctrl->reset_lock);
124		pci_stop_and_remove_bus_device(dev);
125		down_read_nested(&ctrl->reset_lock, ctrl->depth);
126
127		/*
128		 * Ensure that no new Requests will be generated from
129		 * the device.
130		 */
131		if (presence) {
132			pci_read_config_word(dev, PCI_COMMAND, &command);
133			command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
134			command |= PCI_COMMAND_INTX_DISABLE;
135			pci_write_config_word(dev, PCI_COMMAND, command);
136		}
137		pci_dev_put(dev);
138	}
139
140	pci_unlock_rescan_remove();
141}