Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 *
4 * Copyright (C) 1991, 1992 Linus Torvalds
5 *
6 * Enhanced CPU detection and feature setting code by Mike Jagdis
7 * and Martin Mares, November 1997.
8 */
9
10.text
11#include <linux/threads.h>
12#include <linux/init.h>
13#include <linux/linkage.h>
14#include <asm/segment.h>
15#include <asm/page_types.h>
16#include <asm/pgtable_types.h>
17#include <asm/cache.h>
18#include <asm/thread_info.h>
19#include <asm/asm-offsets.h>
20#include <asm/setup.h>
21#include <asm/processor-flags.h>
22#include <asm/msr-index.h>
23#include <asm/cpufeatures.h>
24#include <asm/percpu.h>
25#include <asm/nops.h>
26#include <asm/bootparam.h>
27#include <asm/export.h>
28#include <asm/pgtable_32.h>
29
30/* Physical address */
31#define pa(X) ((X) - __PAGE_OFFSET)
32
33/*
34 * References to members of the new_cpu_data structure.
35 */
36
37#define X86 new_cpu_data+CPUINFO_x86
38#define X86_VENDOR new_cpu_data+CPUINFO_x86_vendor
39#define X86_MODEL new_cpu_data+CPUINFO_x86_model
40#define X86_STEPPING new_cpu_data+CPUINFO_x86_stepping
41#define X86_HARD_MATH new_cpu_data+CPUINFO_hard_math
42#define X86_CPUID new_cpu_data+CPUINFO_cpuid_level
43#define X86_CAPABILITY new_cpu_data+CPUINFO_x86_capability
44#define X86_VENDOR_ID new_cpu_data+CPUINFO_x86_vendor_id
45
46
47#define SIZEOF_PTREGS 17*4
48
49/*
50 * Worst-case size of the kernel mapping we need to make:
51 * a relocatable kernel can live anywhere in lowmem, so we need to be able
52 * to map all of lowmem.
53 */
54KERNEL_PAGES = LOWMEM_PAGES
55
56INIT_MAP_SIZE = PAGE_TABLE_SIZE(KERNEL_PAGES) * PAGE_SIZE
57RESERVE_BRK(pagetables, INIT_MAP_SIZE)
58
59/*
60 * 32-bit kernel entrypoint; only used by the boot CPU. On entry,
61 * %esi points to the real-mode code as a 32-bit pointer.
62 * CS and DS must be 4 GB flat segments, but we don't depend on
63 * any particular GDT layout, because we load our own as soon as we
64 * can.
65 */
66__HEAD
67ENTRY(startup_32)
68 movl pa(initial_stack),%ecx
69
70 /* test KEEP_SEGMENTS flag to see if the bootloader is asking
71 us to not reload segments */
72 testb $KEEP_SEGMENTS, BP_loadflags(%esi)
73 jnz 2f
74
75/*
76 * Set segments to known values.
77 */
78 lgdt pa(boot_gdt_descr)
79 movl $(__BOOT_DS),%eax
80 movl %eax,%ds
81 movl %eax,%es
82 movl %eax,%fs
83 movl %eax,%gs
84 movl %eax,%ss
852:
86 leal -__PAGE_OFFSET(%ecx),%esp
87
88/*
89 * Clear BSS first so that there are no surprises...
90 */
91 cld
92 xorl %eax,%eax
93 movl $pa(__bss_start),%edi
94 movl $pa(__bss_stop),%ecx
95 subl %edi,%ecx
96 shrl $2,%ecx
97 rep ; stosl
98/*
99 * Copy bootup parameters out of the way.
100 * Note: %esi still has the pointer to the real-mode data.
101 * With the kexec as boot loader, parameter segment might be loaded beyond
102 * kernel image and might not even be addressable by early boot page tables.
103 * (kexec on panic case). Hence copy out the parameters before initializing
104 * page tables.
105 */
106 movl $pa(boot_params),%edi
107 movl $(PARAM_SIZE/4),%ecx
108 cld
109 rep
110 movsl
111 movl pa(boot_params) + NEW_CL_POINTER,%esi
112 andl %esi,%esi
113 jz 1f # No command line
114 movl $pa(boot_command_line),%edi
115 movl $(COMMAND_LINE_SIZE/4),%ecx
116 rep
117 movsl
1181:
119
120#ifdef CONFIG_OLPC
121 /* save OFW's pgdir table for later use when calling into OFW */
122 movl %cr3, %eax
123 movl %eax, pa(olpc_ofw_pgd)
124#endif
125
126#ifdef CONFIG_MICROCODE
127 /* Early load ucode on BSP. */
128 call load_ucode_bsp
129#endif
130
131 /* Create early pagetables. */
132 call mk_early_pgtbl_32
133
134 /* Do early initialization of the fixmap area */
135 movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax
136#ifdef CONFIG_X86_PAE
137#define KPMDS (((-__PAGE_OFFSET) >> 30) & 3) /* Number of kernel PMDs */
138 movl %eax,pa(initial_pg_pmd+0x1000*KPMDS-8)
139#else
140 movl %eax,pa(initial_page_table+0xffc)
141#endif
142
143#ifdef CONFIG_PARAVIRT
144 /* This is can only trip for a broken bootloader... */
145 cmpw $0x207, pa(boot_params + BP_version)
146 jb .Ldefault_entry
147
148 /* Paravirt-compatible boot parameters. Look to see what architecture
149 we're booting under. */
150 movl pa(boot_params + BP_hardware_subarch), %eax
151 cmpl $num_subarch_entries, %eax
152 jae .Lbad_subarch
153
154 movl pa(subarch_entries)(,%eax,4), %eax
155 subl $__PAGE_OFFSET, %eax
156 jmp *%eax
157
158.Lbad_subarch:
159WEAK(xen_entry)
160 /* Unknown implementation; there's really
161 nothing we can do at this point. */
162 ud2a
163
164 __INITDATA
165
166subarch_entries:
167 .long .Ldefault_entry /* normal x86/PC */
168 .long xen_entry /* Xen hypervisor */
169 .long .Ldefault_entry /* Moorestown MID */
170num_subarch_entries = (. - subarch_entries) / 4
171.previous
172#else
173 jmp .Ldefault_entry
174#endif /* CONFIG_PARAVIRT */
175
176#ifdef CONFIG_HOTPLUG_CPU
177/*
178 * Boot CPU0 entry point. It's called from play_dead(). Everything has been set
179 * up already except stack. We just set up stack here. Then call
180 * start_secondary().
181 */
182ENTRY(start_cpu0)
183 movl initial_stack, %ecx
184 movl %ecx, %esp
185 call *(initial_code)
1861: jmp 1b
187ENDPROC(start_cpu0)
188#endif
189
190/*
191 * Non-boot CPU entry point; entered from trampoline.S
192 * We can't lgdt here, because lgdt itself uses a data segment, but
193 * we know the trampoline has already loaded the boot_gdt for us.
194 *
195 * If cpu hotplug is not supported then this code can go in init section
196 * which will be freed later
197 */
198ENTRY(startup_32_smp)
199 cld
200 movl $(__BOOT_DS),%eax
201 movl %eax,%ds
202 movl %eax,%es
203 movl %eax,%fs
204 movl %eax,%gs
205 movl pa(initial_stack),%ecx
206 movl %eax,%ss
207 leal -__PAGE_OFFSET(%ecx),%esp
208
209#ifdef CONFIG_MICROCODE
210 /* Early load ucode on AP. */
211 call load_ucode_ap
212#endif
213
214.Ldefault_entry:
215 movl $(CR0_STATE & ~X86_CR0_PG),%eax
216 movl %eax,%cr0
217
218/*
219 * We want to start out with EFLAGS unambiguously cleared. Some BIOSes leave
220 * bits like NT set. This would confuse the debugger if this code is traced. So
221 * initialize them properly now before switching to protected mode. That means
222 * DF in particular (even though we have cleared it earlier after copying the
223 * command line) because GCC expects it.
224 */
225 pushl $0
226 popfl
227
228/*
229 * New page tables may be in 4Mbyte page mode and may be using the global pages.
230 *
231 * NOTE! If we are on a 486 we may have no cr4 at all! Specifically, cr4 exists
232 * if and only if CPUID exists and has flags other than the FPU flag set.
233 */
234 movl $-1,pa(X86_CPUID) # preset CPUID level
235 movl $X86_EFLAGS_ID,%ecx
236 pushl %ecx
237 popfl # set EFLAGS=ID
238 pushfl
239 popl %eax # get EFLAGS
240 testl $X86_EFLAGS_ID,%eax # did EFLAGS.ID remained set?
241 jz .Lenable_paging # hw disallowed setting of ID bit
242 # which means no CPUID and no CR4
243
244 xorl %eax,%eax
245 cpuid
246 movl %eax,pa(X86_CPUID) # save largest std CPUID function
247
248 movl $1,%eax
249 cpuid
250 andl $~1,%edx # Ignore CPUID.FPU
251 jz .Lenable_paging # No flags or only CPUID.FPU = no CR4
252
253 movl pa(mmu_cr4_features),%eax
254 movl %eax,%cr4
255
256 testb $X86_CR4_PAE, %al # check if PAE is enabled
257 jz .Lenable_paging
258
259 /* Check if extended functions are implemented */
260 movl $0x80000000, %eax
261 cpuid
262 /* Value must be in the range 0x80000001 to 0x8000ffff */
263 subl $0x80000001, %eax
264 cmpl $(0x8000ffff-0x80000001), %eax
265 ja .Lenable_paging
266
267 /* Clear bogus XD_DISABLE bits */
268 call verify_cpu
269
270 mov $0x80000001, %eax
271 cpuid
272 /* Execute Disable bit supported? */
273 btl $(X86_FEATURE_NX & 31), %edx
274 jnc .Lenable_paging
275
276 /* Setup EFER (Extended Feature Enable Register) */
277 movl $MSR_EFER, %ecx
278 rdmsr
279
280 btsl $_EFER_NX, %eax
281 /* Make changes effective */
282 wrmsr
283
284.Lenable_paging:
285
286/*
287 * Enable paging
288 */
289 movl $pa(initial_page_table), %eax
290 movl %eax,%cr3 /* set the page table pointer.. */
291 movl $CR0_STATE,%eax
292 movl %eax,%cr0 /* ..and set paging (PG) bit */
293 ljmp $__BOOT_CS,$1f /* Clear prefetch and normalize %eip */
2941:
295 /* Shift the stack pointer to a virtual address */
296 addl $__PAGE_OFFSET, %esp
297
298/*
299 * start system 32-bit setup. We need to re-do some of the things done
300 * in 16-bit mode for the "real" operations.
301 */
302 movl setup_once_ref,%eax
303 andl %eax,%eax
304 jz 1f # Did we do this already?
305 call *%eax
3061:
307
308/*
309 * Check if it is 486
310 */
311 movb $4,X86 # at least 486
312 cmpl $-1,X86_CPUID
313 je .Lis486
314
315 /* get vendor info */
316 xorl %eax,%eax # call CPUID with 0 -> return vendor ID
317 cpuid
318 movl %eax,X86_CPUID # save CPUID level
319 movl %ebx,X86_VENDOR_ID # lo 4 chars
320 movl %edx,X86_VENDOR_ID+4 # next 4 chars
321 movl %ecx,X86_VENDOR_ID+8 # last 4 chars
322
323 orl %eax,%eax # do we have processor info as well?
324 je .Lis486
325
326 movl $1,%eax # Use the CPUID instruction to get CPU type
327 cpuid
328 movb %al,%cl # save reg for future use
329 andb $0x0f,%ah # mask processor family
330 movb %ah,X86
331 andb $0xf0,%al # mask model
332 shrb $4,%al
333 movb %al,X86_MODEL
334 andb $0x0f,%cl # mask mask revision
335 movb %cl,X86_STEPPING
336 movl %edx,X86_CAPABILITY
337
338.Lis486:
339 movl $0x50022,%ecx # set AM, WP, NE and MP
340 movl %cr0,%eax
341 andl $0x80000011,%eax # Save PG,PE,ET
342 orl %ecx,%eax
343 movl %eax,%cr0
344
345 lgdt early_gdt_descr
346 ljmp $(__KERNEL_CS),$1f
3471: movl $(__KERNEL_DS),%eax # reload all the segment registers
348 movl %eax,%ss # after changing gdt.
349
350 movl $(__USER_DS),%eax # DS/ES contains default USER segment
351 movl %eax,%ds
352 movl %eax,%es
353
354 movl $(__KERNEL_PERCPU), %eax
355 movl %eax,%fs # set this cpu's percpu
356
357 movl $(__KERNEL_STACK_CANARY),%eax
358 movl %eax,%gs
359
360 xorl %eax,%eax # Clear LDT
361 lldt %ax
362
363 call *(initial_code)
3641: jmp 1b
365ENDPROC(startup_32_smp)
366
367#include "verify_cpu.S"
368
369/*
370 * setup_once
371 *
372 * The setup work we only want to run on the BSP.
373 *
374 * Warning: %esi is live across this function.
375 */
376__INIT
377setup_once:
378#ifdef CONFIG_STACKPROTECTOR
379 /*
380 * Configure the stack canary. The linker can't handle this by
381 * relocation. Manually set base address in stack canary
382 * segment descriptor.
383 */
384 movl $gdt_page,%eax
385 movl $stack_canary,%ecx
386 movw %cx, 8 * GDT_ENTRY_STACK_CANARY + 2(%eax)
387 shrl $16, %ecx
388 movb %cl, 8 * GDT_ENTRY_STACK_CANARY + 4(%eax)
389 movb %ch, 8 * GDT_ENTRY_STACK_CANARY + 7(%eax)
390#endif
391
392 andl $0,setup_once_ref /* Once is enough, thanks */
393 ret
394
395ENTRY(early_idt_handler_array)
396 # 36(%esp) %eflags
397 # 32(%esp) %cs
398 # 28(%esp) %eip
399 # 24(%rsp) error code
400 i = 0
401 .rept NUM_EXCEPTION_VECTORS
402 .if ((EXCEPTION_ERRCODE_MASK >> i) & 1) == 0
403 pushl $0 # Dummy error code, to make stack frame uniform
404 .endif
405 pushl $i # 20(%esp) Vector number
406 jmp early_idt_handler_common
407 i = i + 1
408 .fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
409 .endr
410ENDPROC(early_idt_handler_array)
411
412early_idt_handler_common:
413 /*
414 * The stack is the hardware frame, an error code or zero, and the
415 * vector number.
416 */
417 cld
418
419 incl %ss:early_recursion_flag
420
421 /* The vector number is in pt_regs->gs */
422
423 cld
424 pushl %fs /* pt_regs->fs (__fsh varies by model) */
425 pushl %es /* pt_regs->es (__esh varies by model) */
426 pushl %ds /* pt_regs->ds (__dsh varies by model) */
427 pushl %eax /* pt_regs->ax */
428 pushl %ebp /* pt_regs->bp */
429 pushl %edi /* pt_regs->di */
430 pushl %esi /* pt_regs->si */
431 pushl %edx /* pt_regs->dx */
432 pushl %ecx /* pt_regs->cx */
433 pushl %ebx /* pt_regs->bx */
434
435 /* Fix up DS and ES */
436 movl $(__KERNEL_DS), %ecx
437 movl %ecx, %ds
438 movl %ecx, %es
439
440 /* Load the vector number into EDX */
441 movl PT_GS(%esp), %edx
442
443 /* Load GS into pt_regs->gs (and maybe clobber __gsh) */
444 movw %gs, PT_GS(%esp)
445
446 movl %esp, %eax /* args are pt_regs (EAX), trapnr (EDX) */
447 call early_fixup_exception
448
449 popl %ebx /* pt_regs->bx */
450 popl %ecx /* pt_regs->cx */
451 popl %edx /* pt_regs->dx */
452 popl %esi /* pt_regs->si */
453 popl %edi /* pt_regs->di */
454 popl %ebp /* pt_regs->bp */
455 popl %eax /* pt_regs->ax */
456 popl %ds /* pt_regs->ds (always ignores __dsh) */
457 popl %es /* pt_regs->es (always ignores __esh) */
458 popl %fs /* pt_regs->fs (always ignores __fsh) */
459 popl %gs /* pt_regs->gs (always ignores __gsh) */
460 decl %ss:early_recursion_flag
461 addl $4, %esp /* pop pt_regs->orig_ax */
462 iret
463ENDPROC(early_idt_handler_common)
464
465/* This is the default interrupt "handler" :-) */
466ENTRY(early_ignore_irq)
467 cld
468#ifdef CONFIG_PRINTK
469 pushl %eax
470 pushl %ecx
471 pushl %edx
472 pushl %es
473 pushl %ds
474 movl $(__KERNEL_DS),%eax
475 movl %eax,%ds
476 movl %eax,%es
477 cmpl $2,early_recursion_flag
478 je hlt_loop
479 incl early_recursion_flag
480 pushl 16(%esp)
481 pushl 24(%esp)
482 pushl 32(%esp)
483 pushl 40(%esp)
484 pushl $int_msg
485 call printk
486
487 call dump_stack
488
489 addl $(5*4),%esp
490 popl %ds
491 popl %es
492 popl %edx
493 popl %ecx
494 popl %eax
495#endif
496 iret
497
498hlt_loop:
499 hlt
500 jmp hlt_loop
501ENDPROC(early_ignore_irq)
502
503__INITDATA
504 .align 4
505GLOBAL(early_recursion_flag)
506 .long 0
507
508__REFDATA
509 .align 4
510ENTRY(initial_code)
511 .long i386_start_kernel
512ENTRY(setup_once_ref)
513 .long setup_once
514
515#ifdef CONFIG_PAGE_TABLE_ISOLATION
516#define PGD_ALIGN (2 * PAGE_SIZE)
517#define PTI_USER_PGD_FILL 1024
518#else
519#define PGD_ALIGN (PAGE_SIZE)
520#define PTI_USER_PGD_FILL 0
521#endif
522/*
523 * BSS section
524 */
525__PAGE_ALIGNED_BSS
526 .align PGD_ALIGN
527#ifdef CONFIG_X86_PAE
528.globl initial_pg_pmd
529initial_pg_pmd:
530 .fill 1024*KPMDS,4,0
531#else
532.globl initial_page_table
533initial_page_table:
534 .fill 1024,4,0
535#endif
536 .align PGD_ALIGN
537initial_pg_fixmap:
538 .fill 1024,4,0
539.globl swapper_pg_dir
540 .align PGD_ALIGN
541swapper_pg_dir:
542 .fill 1024,4,0
543 .fill PTI_USER_PGD_FILL,4,0
544.globl empty_zero_page
545empty_zero_page:
546 .fill 4096,1,0
547EXPORT_SYMBOL(empty_zero_page)
548
549/*
550 * This starts the data section.
551 */
552#ifdef CONFIG_X86_PAE
553__PAGE_ALIGNED_DATA
554 /* Page-aligned for the benefit of paravirt? */
555 .align PGD_ALIGN
556ENTRY(initial_page_table)
557 .long pa(initial_pg_pmd+PGD_IDENT_ATTR),0 /* low identity map */
558# if KPMDS == 3
559 .long pa(initial_pg_pmd+PGD_IDENT_ATTR),0
560 .long pa(initial_pg_pmd+PGD_IDENT_ATTR+0x1000),0
561 .long pa(initial_pg_pmd+PGD_IDENT_ATTR+0x2000),0
562# elif KPMDS == 2
563 .long 0,0
564 .long pa(initial_pg_pmd+PGD_IDENT_ATTR),0
565 .long pa(initial_pg_pmd+PGD_IDENT_ATTR+0x1000),0
566# elif KPMDS == 1
567 .long 0,0
568 .long 0,0
569 .long pa(initial_pg_pmd+PGD_IDENT_ATTR),0
570# else
571# error "Kernel PMDs should be 1, 2 or 3"
572# endif
573 .align PAGE_SIZE /* needs to be page-sized too */
574#endif
575
576.data
577.balign 4
578ENTRY(initial_stack)
579 /*
580 * The SIZEOF_PTREGS gap is a convention which helps the in-kernel
581 * unwinder reliably detect the end of the stack.
582 */
583 .long init_thread_union + THREAD_SIZE - SIZEOF_PTREGS - \
584 TOP_OF_KERNEL_STACK_PADDING;
585
586__INITRODATA
587int_msg:
588 .asciz "Unknown interrupt or fault at: %p %p %p\n"
589
590#include "../../x86/xen/xen-head.S"
591
592/*
593 * The IDT and GDT 'descriptors' are a strange 48-bit object
594 * only used by the lidt and lgdt instructions. They are not
595 * like usual segment descriptors - they consist of a 16-bit
596 * segment size, and 32-bit linear address value:
597 */
598
599 .data
600.globl boot_gdt_descr
601
602 ALIGN
603# early boot GDT descriptor (must use 1:1 address mapping)
604 .word 0 # 32 bit align gdt_desc.address
605boot_gdt_descr:
606 .word __BOOT_DS+7
607 .long boot_gdt - __PAGE_OFFSET
608
609# boot GDT descriptor (later on used by CPU#0):
610 .word 0 # 32 bit align gdt_desc.address
611ENTRY(early_gdt_descr)
612 .word GDT_ENTRIES*8-1
613 .long gdt_page /* Overwritten for secondary CPUs */
614
615/*
616 * The boot_gdt must mirror the equivalent in setup.S and is
617 * used only for booting.
618 */
619 .align L1_CACHE_BYTES
620ENTRY(boot_gdt)
621 .fill GDT_ENTRY_BOOT_CS,8,0
622 .quad 0x00cf9a000000ffff /* kernel 4GB code at 0x00000000 */
623 .quad 0x00cf92000000ffff /* kernel 4GB data at 0x00000000 */
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 *
4 * Copyright (C) 1991, 1992 Linus Torvalds
5 *
6 * Enhanced CPU detection and feature setting code by Mike Jagdis
7 * and Martin Mares, November 1997.
8 */
9
10.text
11#include <linux/export.h>
12#include <linux/threads.h>
13#include <linux/init.h>
14#include <linux/linkage.h>
15#include <asm/segment.h>
16#include <asm/page_types.h>
17#include <asm/pgtable_types.h>
18#include <asm/cache.h>
19#include <asm/thread_info.h>
20#include <asm/asm-offsets.h>
21#include <asm/setup.h>
22#include <asm/processor-flags.h>
23#include <asm/msr-index.h>
24#include <asm/cpufeatures.h>
25#include <asm/percpu.h>
26#include <asm/nops.h>
27#include <asm/nospec-branch.h>
28#include <asm/bootparam.h>
29#include <asm/pgtable_32.h>
30
31/* Physical address */
32#define pa(X) ((X) - __PAGE_OFFSET)
33
34/*
35 * References to members of the new_cpu_data structure.
36 */
37
38#define X86 new_cpu_data+CPUINFO_x86
39#define X86_VENDOR new_cpu_data+CPUINFO_x86_vendor
40#define X86_MODEL new_cpu_data+CPUINFO_x86_model
41#define X86_STEPPING new_cpu_data+CPUINFO_x86_stepping
42#define X86_HARD_MATH new_cpu_data+CPUINFO_hard_math
43#define X86_CPUID new_cpu_data+CPUINFO_cpuid_level
44#define X86_CAPABILITY new_cpu_data+CPUINFO_x86_capability
45#define X86_VENDOR_ID new_cpu_data+CPUINFO_x86_vendor_id
46
47/*
48 * Worst-case size of the kernel mapping we need to make:
49 * a relocatable kernel can live anywhere in lowmem, so we need to be able
50 * to map all of lowmem.
51 */
52KERNEL_PAGES = LOWMEM_PAGES
53
54INIT_MAP_SIZE = PAGE_TABLE_SIZE(KERNEL_PAGES) * PAGE_SIZE
55RESERVE_BRK(pagetables, INIT_MAP_SIZE)
56
57/*
58 * 32-bit kernel entrypoint; only used by the boot CPU. On entry,
59 * %esi points to the real-mode code as a 32-bit pointer.
60 * CS and DS must be 4 GB flat segments, but we don't depend on
61 * any particular GDT layout, because we load our own as soon as we
62 * can.
63 */
64__HEAD
65SYM_CODE_START(startup_32)
66 movl pa(initial_stack),%ecx
67
68/*
69 * Set segments to known values.
70 */
71 lgdt pa(boot_gdt_descr)
72 movl $(__BOOT_DS),%eax
73 movl %eax,%ds
74 movl %eax,%es
75 movl %eax,%fs
76 movl %eax,%gs
77 movl %eax,%ss
78 leal -__PAGE_OFFSET(%ecx),%esp
79
80/*
81 * Clear BSS first so that there are no surprises...
82 */
83 cld
84 xorl %eax,%eax
85 movl $pa(__bss_start),%edi
86 movl $pa(__bss_stop),%ecx
87 subl %edi,%ecx
88 shrl $2,%ecx
89 rep ; stosl
90/*
91 * Copy bootup parameters out of the way.
92 * Note: %esi still has the pointer to the real-mode data.
93 * With the kexec as boot loader, parameter segment might be loaded beyond
94 * kernel image and might not even be addressable by early boot page tables.
95 * (kexec on panic case). Hence copy out the parameters before initializing
96 * page tables.
97 */
98 movl $pa(boot_params),%edi
99 movl $(PARAM_SIZE/4),%ecx
100 cld
101 rep
102 movsl
103 movl pa(boot_params) + NEW_CL_POINTER,%esi
104 andl %esi,%esi
105 jz 1f # No command line
106 movl $pa(boot_command_line),%edi
107 movl $(COMMAND_LINE_SIZE/4),%ecx
108 rep
109 movsl
1101:
111
112#ifdef CONFIG_OLPC
113 /* save OFW's pgdir table for later use when calling into OFW */
114 movl %cr3, %eax
115 movl %eax, pa(olpc_ofw_pgd)
116#endif
117
118 /* Create early pagetables. */
119 call mk_early_pgtbl_32
120
121 /* Do early initialization of the fixmap area */
122 movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax
123#ifdef CONFIG_X86_PAE
124#define KPMDS (((-__PAGE_OFFSET) >> 30) & 3) /* Number of kernel PMDs */
125 movl %eax,pa(initial_pg_pmd+0x1000*KPMDS-8)
126#else
127 movl %eax,pa(initial_page_table+0xffc)
128#endif
129
130 jmp .Ldefault_entry
131SYM_CODE_END(startup_32)
132
133/*
134 * Non-boot CPU entry point; entered from trampoline.S
135 * We can't lgdt here, because lgdt itself uses a data segment, but
136 * we know the trampoline has already loaded the boot_gdt for us.
137 *
138 * If cpu hotplug is not supported then this code can go in init section
139 * which will be freed later
140 */
141SYM_FUNC_START(startup_32_smp)
142 cld
143 movl $(__BOOT_DS),%eax
144 movl %eax,%ds
145 movl %eax,%es
146 movl %eax,%fs
147 movl %eax,%gs
148 movl pa(initial_stack),%ecx
149 movl %eax,%ss
150 leal -__PAGE_OFFSET(%ecx),%esp
151
152.Ldefault_entry:
153 movl $(CR0_STATE & ~X86_CR0_PG),%eax
154 movl %eax,%cr0
155
156/*
157 * We want to start out with EFLAGS unambiguously cleared. Some BIOSes leave
158 * bits like NT set. This would confuse the debugger if this code is traced. So
159 * initialize them properly now before switching to protected mode. That means
160 * DF in particular (even though we have cleared it earlier after copying the
161 * command line) because GCC expects it.
162 */
163 pushl $0
164 popfl
165
166/*
167 * New page tables may be in 4Mbyte page mode and may be using the global pages.
168 *
169 * NOTE! If we are on a 486 we may have no cr4 at all! Specifically, cr4 exists
170 * if and only if CPUID exists and has flags other than the FPU flag set.
171 */
172 movl $-1,pa(X86_CPUID) # preset CPUID level
173 movl $X86_EFLAGS_ID,%ecx
174 pushl %ecx
175 popfl # set EFLAGS=ID
176 pushfl
177 popl %eax # get EFLAGS
178 testl $X86_EFLAGS_ID,%eax # did EFLAGS.ID remained set?
179 jz .Lenable_paging # hw disallowed setting of ID bit
180 # which means no CPUID and no CR4
181
182 xorl %eax,%eax
183 cpuid
184 movl %eax,pa(X86_CPUID) # save largest std CPUID function
185
186 movl $1,%eax
187 cpuid
188 andl $~1,%edx # Ignore CPUID.FPU
189 jz .Lenable_paging # No flags or only CPUID.FPU = no CR4
190
191 movl pa(mmu_cr4_features),%eax
192 movl %eax,%cr4
193
194 testb $X86_CR4_PAE, %al # check if PAE is enabled
195 jz .Lenable_paging
196
197 /* Check if extended functions are implemented */
198 movl $0x80000000, %eax
199 cpuid
200 /* Value must be in the range 0x80000001 to 0x8000ffff */
201 subl $0x80000001, %eax
202 cmpl $(0x8000ffff-0x80000001), %eax
203 ja .Lenable_paging
204
205 /* Clear bogus XD_DISABLE bits */
206 call verify_cpu
207
208 mov $0x80000001, %eax
209 cpuid
210 /* Execute Disable bit supported? */
211 btl $(X86_FEATURE_NX & 31), %edx
212 jnc .Lenable_paging
213
214 /* Setup EFER (Extended Feature Enable Register) */
215 movl $MSR_EFER, %ecx
216 rdmsr
217
218 btsl $_EFER_NX, %eax
219 /* Make changes effective */
220 wrmsr
221
222.Lenable_paging:
223
224/*
225 * Enable paging
226 */
227 movl $pa(initial_page_table), %eax
228 movl %eax,%cr3 /* set the page table pointer.. */
229 movl $CR0_STATE,%eax
230 movl %eax,%cr0 /* ..and set paging (PG) bit */
231 ljmp $__BOOT_CS,$1f /* Clear prefetch and normalize %eip */
2321:
233 /* Shift the stack pointer to a virtual address */
234 addl $__PAGE_OFFSET, %esp
235
236/*
237 * Check if it is 486
238 */
239 movb $4,X86 # at least 486
240 cmpl $-1,X86_CPUID
241 je .Lis486
242
243 /* get vendor info */
244 xorl %eax,%eax # call CPUID with 0 -> return vendor ID
245 cpuid
246 movl %eax,X86_CPUID # save CPUID level
247 movl %ebx,X86_VENDOR_ID # lo 4 chars
248 movl %edx,X86_VENDOR_ID+4 # next 4 chars
249 movl %ecx,X86_VENDOR_ID+8 # last 4 chars
250
251 orl %eax,%eax # do we have processor info as well?
252 je .Lis486
253
254 movl $1,%eax # Use the CPUID instruction to get CPU type
255 cpuid
256 movb %al,%cl # save reg for future use
257 andb $0x0f,%ah # mask processor family
258 movb %ah,X86
259 andb $0xf0,%al # mask model
260 shrb $4,%al
261 movb %al,X86_MODEL
262 andb $0x0f,%cl # mask mask revision
263 movb %cl,X86_STEPPING
264 movl %edx,X86_CAPABILITY
265
266.Lis486:
267 movl $0x50022,%ecx # set AM, WP, NE and MP
268 movl %cr0,%eax
269 andl $0x80000011,%eax # Save PG,PE,ET
270 orl %ecx,%eax
271 movl %eax,%cr0
272
273 lgdt early_gdt_descr
274 ljmp $(__KERNEL_CS),$1f
2751: movl $(__KERNEL_DS),%eax # reload all the segment registers
276 movl %eax,%ss # after changing gdt.
277
278 movl $(__USER_DS),%eax # DS/ES contains default USER segment
279 movl %eax,%ds
280 movl %eax,%es
281
282 movl $(__KERNEL_PERCPU), %eax
283 movl %eax,%fs # set this cpu's percpu
284
285 xorl %eax,%eax
286 movl %eax,%gs # clear possible garbage in %gs
287
288 xorl %eax,%eax # Clear LDT
289 lldt %ax
290
291 call *(initial_code)
2921: jmp 1b
293SYM_FUNC_END(startup_32_smp)
294
295#include "verify_cpu.S"
296
297__INIT
298SYM_FUNC_START(early_idt_handler_array)
299 # 36(%esp) %eflags
300 # 32(%esp) %cs
301 # 28(%esp) %eip
302 # 24(%rsp) error code
303 i = 0
304 .rept NUM_EXCEPTION_VECTORS
305 .if ((EXCEPTION_ERRCODE_MASK >> i) & 1) == 0
306 pushl $0 # Dummy error code, to make stack frame uniform
307 .endif
308 pushl $i # 20(%esp) Vector number
309 jmp early_idt_handler_common
310 i = i + 1
311 .fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
312 .endr
313SYM_FUNC_END(early_idt_handler_array)
314
315SYM_CODE_START_LOCAL(early_idt_handler_common)
316 /*
317 * The stack is the hardware frame, an error code or zero, and the
318 * vector number.
319 */
320 cld
321
322 incl %ss:early_recursion_flag
323
324 /* The vector number is in pt_regs->gs */
325
326 cld
327 pushl %fs /* pt_regs->fs (__fsh varies by model) */
328 pushl %es /* pt_regs->es (__esh varies by model) */
329 pushl %ds /* pt_regs->ds (__dsh varies by model) */
330 pushl %eax /* pt_regs->ax */
331 pushl %ebp /* pt_regs->bp */
332 pushl %edi /* pt_regs->di */
333 pushl %esi /* pt_regs->si */
334 pushl %edx /* pt_regs->dx */
335 pushl %ecx /* pt_regs->cx */
336 pushl %ebx /* pt_regs->bx */
337
338 /* Fix up DS and ES */
339 movl $(__KERNEL_DS), %ecx
340 movl %ecx, %ds
341 movl %ecx, %es
342
343 /* Load the vector number into EDX */
344 movl PT_GS(%esp), %edx
345
346 /* Load GS into pt_regs->gs (and maybe clobber __gsh) */
347 movw %gs, PT_GS(%esp)
348
349 movl %esp, %eax /* args are pt_regs (EAX), trapnr (EDX) */
350 call early_fixup_exception
351
352 popl %ebx /* pt_regs->bx */
353 popl %ecx /* pt_regs->cx */
354 popl %edx /* pt_regs->dx */
355 popl %esi /* pt_regs->si */
356 popl %edi /* pt_regs->di */
357 popl %ebp /* pt_regs->bp */
358 popl %eax /* pt_regs->ax */
359 popl %ds /* pt_regs->ds (always ignores __dsh) */
360 popl %es /* pt_regs->es (always ignores __esh) */
361 popl %fs /* pt_regs->fs (always ignores __fsh) */
362 popl %gs /* pt_regs->gs (always ignores __gsh) */
363 decl %ss:early_recursion_flag
364 addl $4, %esp /* pop pt_regs->orig_ax */
365 iret
366SYM_CODE_END(early_idt_handler_common)
367
368/* This is the default interrupt "handler" :-) */
369SYM_FUNC_START(early_ignore_irq)
370 cld
371#ifdef CONFIG_PRINTK
372 pushl %eax
373 pushl %ecx
374 pushl %edx
375 pushl %es
376 pushl %ds
377 movl $(__KERNEL_DS),%eax
378 movl %eax,%ds
379 movl %eax,%es
380 cmpl $2,early_recursion_flag
381 je hlt_loop
382 incl early_recursion_flag
383 pushl 16(%esp)
384 pushl 24(%esp)
385 pushl 32(%esp)
386 pushl 40(%esp)
387 pushl $int_msg
388 call _printk
389
390 call dump_stack
391
392 addl $(5*4),%esp
393 popl %ds
394 popl %es
395 popl %edx
396 popl %ecx
397 popl %eax
398#endif
399 iret
400
401hlt_loop:
402 hlt
403 jmp hlt_loop
404SYM_FUNC_END(early_ignore_irq)
405
406__INITDATA
407 .align 4
408SYM_DATA(early_recursion_flag, .long 0)
409
410__REFDATA
411 .align 4
412SYM_DATA(initial_code, .long i386_start_kernel)
413
414#ifdef CONFIG_MITIGATION_PAGE_TABLE_ISOLATION
415#define PGD_ALIGN (2 * PAGE_SIZE)
416#define PTI_USER_PGD_FILL 1024
417#else
418#define PGD_ALIGN (PAGE_SIZE)
419#define PTI_USER_PGD_FILL 0
420#endif
421/*
422 * BSS section
423 */
424__PAGE_ALIGNED_BSS
425 .align PGD_ALIGN
426#ifdef CONFIG_X86_PAE
427.globl initial_pg_pmd
428initial_pg_pmd:
429 .fill 1024*KPMDS,4,0
430#else
431.globl initial_page_table
432initial_page_table:
433 .fill 1024,4,0
434#endif
435 .align PGD_ALIGN
436initial_pg_fixmap:
437 .fill 1024,4,0
438.globl swapper_pg_dir
439 .align PGD_ALIGN
440swapper_pg_dir:
441 .fill 1024,4,0
442 .fill PTI_USER_PGD_FILL,4,0
443.globl empty_zero_page
444empty_zero_page:
445 .fill 4096,1,0
446EXPORT_SYMBOL(empty_zero_page)
447
448/*
449 * This starts the data section.
450 */
451#ifdef CONFIG_X86_PAE
452__PAGE_ALIGNED_DATA
453 /* Page-aligned for the benefit of paravirt? */
454 .align PGD_ALIGN
455SYM_DATA_START(initial_page_table)
456 .long pa(initial_pg_pmd+PGD_IDENT_ATTR),0 /* low identity map */
457# if KPMDS == 3
458 .long pa(initial_pg_pmd+PGD_IDENT_ATTR),0
459 .long pa(initial_pg_pmd+PGD_IDENT_ATTR+0x1000),0
460 .long pa(initial_pg_pmd+PGD_IDENT_ATTR+0x2000),0
461# elif KPMDS == 2
462 .long 0,0
463 .long pa(initial_pg_pmd+PGD_IDENT_ATTR),0
464 .long pa(initial_pg_pmd+PGD_IDENT_ATTR+0x1000),0
465# elif KPMDS == 1
466 .long 0,0
467 .long 0,0
468 .long pa(initial_pg_pmd+PGD_IDENT_ATTR),0
469# else
470# error "Kernel PMDs should be 1, 2 or 3"
471# endif
472 .align PAGE_SIZE /* needs to be page-sized too */
473
474#ifdef CONFIG_MITIGATION_PAGE_TABLE_ISOLATION
475 /*
476 * PTI needs another page so sync_initial_pagetable() works correctly
477 * and does not scribble over the data which is placed behind the
478 * actual initial_page_table. See clone_pgd_range().
479 */
480 .fill 1024, 4, 0
481#endif
482
483SYM_DATA_END(initial_page_table)
484#endif
485
486.data
487.balign 4
488SYM_DATA(initial_stack, .long __top_init_kernel_stack)
489
490__INITRODATA
491int_msg:
492 .asciz "Unknown interrupt or fault at: %p %p %p\n"
493
494#include "../xen/xen-head.S"
495
496/*
497 * The IDT and GDT 'descriptors' are a strange 48-bit object
498 * only used by the lidt and lgdt instructions. They are not
499 * like usual segment descriptors - they consist of a 16-bit
500 * segment size, and 32-bit linear address value:
501 */
502
503 .data
504 ALIGN
505# early boot GDT descriptor (must use 1:1 address mapping)
506 .word 0 # 32 bit align gdt_desc.address
507SYM_DATA_START_LOCAL(boot_gdt_descr)
508 .word __BOOT_DS+7
509 .long boot_gdt - __PAGE_OFFSET
510SYM_DATA_END(boot_gdt_descr)
511
512# boot GDT descriptor (later on used by CPU#0):
513 .word 0 # 32 bit align gdt_desc.address
514SYM_DATA_START(early_gdt_descr)
515 .word GDT_ENTRIES*8-1
516 .long gdt_page /* Overwritten for secondary CPUs */
517SYM_DATA_END(early_gdt_descr)
518
519/*
520 * The boot_gdt must mirror the equivalent in setup.S and is
521 * used only for booting.
522 */
523 .align L1_CACHE_BYTES
524SYM_DATA_START(boot_gdt)
525 .fill GDT_ENTRY_BOOT_CS,8,0
526 .quad 0x00cf9a000000ffff /* kernel 4GB code at 0x00000000 */
527 .quad 0x00cf92000000ffff /* kernel 4GB data at 0x00000000 */
528SYM_DATA_END(boot_gdt)