Loading...
1/*
2 * arch/arm/mm/cache-tauros2.c - Tauros2 L2 cache controller support
3 *
4 * Copyright (C) 2008 Marvell Semiconductor
5 *
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 *
10 * References:
11 * - PJ1 CPU Core Datasheet,
12 * Document ID MV-S104837-01, Rev 0.7, January 24 2008.
13 * - PJ4 CPU Core Datasheet,
14 * Document ID MV-S105190-00, Rev 0.7, March 14 2008.
15 */
16
17#include <linux/init.h>
18#include <linux/of.h>
19#include <linux/of_address.h>
20#include <asm/cacheflush.h>
21#include <asm/cp15.h>
22#include <asm/cputype.h>
23#include <asm/hardware/cache-tauros2.h>
24
25/* CP15 PJ4 Control configuration register */
26#define CCR_L2C_PREFETCH_DISABLE BIT(24)
27#define CCR_L2C_ECC_ENABLE BIT(23)
28#define CCR_L2C_WAY7_4_DISABLE BIT(21)
29#define CCR_L2C_BURST8_ENABLE BIT(20)
30
31/*
32 * When Tauros2 is used on a CPU that supports the v7 hierarchical
33 * cache operations, the cache handling code in proc-v7.S takes care
34 * of everything, including handling DMA coherency.
35 *
36 * So, we only need to register outer cache operations here if we're
37 * being used on a pre-v7 CPU, and we only need to build support for
38 * outer cache operations into the kernel image if the kernel has been
39 * configured to support a pre-v7 CPU.
40 */
41#ifdef CONFIG_CPU_32v5
42/*
43 * Low-level cache maintenance operations.
44 */
45static inline void tauros2_clean_pa(unsigned long addr)
46{
47 __asm__("mcr p15, 1, %0, c7, c11, 3" : : "r" (addr));
48}
49
50static inline void tauros2_clean_inv_pa(unsigned long addr)
51{
52 __asm__("mcr p15, 1, %0, c7, c15, 3" : : "r" (addr));
53}
54
55static inline void tauros2_inv_pa(unsigned long addr)
56{
57 __asm__("mcr p15, 1, %0, c7, c7, 3" : : "r" (addr));
58}
59
60
61/*
62 * Linux primitives.
63 *
64 * Note that the end addresses passed to Linux primitives are
65 * noninclusive.
66 */
67#define CACHE_LINE_SIZE 32
68
69static void tauros2_inv_range(unsigned long start, unsigned long end)
70{
71 /*
72 * Clean and invalidate partial first cache line.
73 */
74 if (start & (CACHE_LINE_SIZE - 1)) {
75 tauros2_clean_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
76 start = (start | (CACHE_LINE_SIZE - 1)) + 1;
77 }
78
79 /*
80 * Clean and invalidate partial last cache line.
81 */
82 if (end & (CACHE_LINE_SIZE - 1)) {
83 tauros2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
84 end &= ~(CACHE_LINE_SIZE - 1);
85 }
86
87 /*
88 * Invalidate all full cache lines between 'start' and 'end'.
89 */
90 while (start < end) {
91 tauros2_inv_pa(start);
92 start += CACHE_LINE_SIZE;
93 }
94
95 dsb();
96}
97
98static void tauros2_clean_range(unsigned long start, unsigned long end)
99{
100 start &= ~(CACHE_LINE_SIZE - 1);
101 while (start < end) {
102 tauros2_clean_pa(start);
103 start += CACHE_LINE_SIZE;
104 }
105
106 dsb();
107}
108
109static void tauros2_flush_range(unsigned long start, unsigned long end)
110{
111 start &= ~(CACHE_LINE_SIZE - 1);
112 while (start < end) {
113 tauros2_clean_inv_pa(start);
114 start += CACHE_LINE_SIZE;
115 }
116
117 dsb();
118}
119
120static void tauros2_disable(void)
121{
122 __asm__ __volatile__ (
123 "mcr p15, 1, %0, c7, c11, 0 @L2 Cache Clean All\n\t"
124 "mrc p15, 0, %0, c1, c0, 0\n\t"
125 "bic %0, %0, #(1 << 26)\n\t"
126 "mcr p15, 0, %0, c1, c0, 0 @Disable L2 Cache\n\t"
127 : : "r" (0x0));
128}
129
130static void tauros2_resume(void)
131{
132 __asm__ __volatile__ (
133 "mcr p15, 1, %0, c7, c7, 0 @L2 Cache Invalidate All\n\t"
134 "mrc p15, 0, %0, c1, c0, 0\n\t"
135 "orr %0, %0, #(1 << 26)\n\t"
136 "mcr p15, 0, %0, c1, c0, 0 @Enable L2 Cache\n\t"
137 : : "r" (0x0));
138}
139#endif
140
141static inline u32 __init read_extra_features(void)
142{
143 u32 u;
144
145 __asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (u));
146
147 return u;
148}
149
150static inline void __init write_extra_features(u32 u)
151{
152 __asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
153}
154
155static inline int __init cpuid_scheme(void)
156{
157 return !!((processor_id & 0x000f0000) == 0x000f0000);
158}
159
160static inline u32 __init read_mmfr3(void)
161{
162 u32 mmfr3;
163
164 __asm__("mrc p15, 0, %0, c0, c1, 7\n" : "=r" (mmfr3));
165
166 return mmfr3;
167}
168
169static inline u32 __init read_actlr(void)
170{
171 u32 actlr;
172
173 __asm__("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr));
174
175 return actlr;
176}
177
178static inline void __init write_actlr(u32 actlr)
179{
180 __asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr));
181}
182
183static void enable_extra_feature(unsigned int features)
184{
185 u32 u;
186
187 u = read_extra_features();
188
189 if (features & CACHE_TAUROS2_PREFETCH_ON)
190 u &= ~CCR_L2C_PREFETCH_DISABLE;
191 else
192 u |= CCR_L2C_PREFETCH_DISABLE;
193 pr_info("Tauros2: %s L2 prefetch.\n",
194 (features & CACHE_TAUROS2_PREFETCH_ON)
195 ? "Enabling" : "Disabling");
196
197 if (features & CACHE_TAUROS2_LINEFILL_BURST8)
198 u |= CCR_L2C_BURST8_ENABLE;
199 else
200 u &= ~CCR_L2C_BURST8_ENABLE;
201 pr_info("Tauros2: %s burst8 line fill.\n",
202 (features & CACHE_TAUROS2_LINEFILL_BURST8)
203 ? "Enabling" : "Disabling");
204
205 write_extra_features(u);
206}
207
208static void __init tauros2_internal_init(unsigned int features)
209{
210 char *mode = NULL;
211
212 enable_extra_feature(features);
213
214#ifdef CONFIG_CPU_32v5
215 if ((processor_id & 0xff0f0000) == 0x56050000) {
216 u32 feat;
217
218 /*
219 * v5 CPUs with Tauros2 have the L2 cache enable bit
220 * located in the CPU Extra Features register.
221 */
222 feat = read_extra_features();
223 if (!(feat & 0x00400000)) {
224 pr_info("Tauros2: Enabling L2 cache.\n");
225 write_extra_features(feat | 0x00400000);
226 }
227
228 mode = "ARMv5";
229 outer_cache.inv_range = tauros2_inv_range;
230 outer_cache.clean_range = tauros2_clean_range;
231 outer_cache.flush_range = tauros2_flush_range;
232 outer_cache.disable = tauros2_disable;
233 outer_cache.resume = tauros2_resume;
234 }
235#endif
236
237#ifdef CONFIG_CPU_32v7
238 /*
239 * Check whether this CPU has support for the v7 hierarchical
240 * cache ops. (PJ4 is in its v7 personality mode if the MMFR3
241 * register indicates support for the v7 hierarchical cache
242 * ops.)
243 *
244 * (Although strictly speaking there may exist CPUs that
245 * implement the v7 cache ops but are only ARMv6 CPUs (due to
246 * not complying with all of the other ARMv7 requirements),
247 * there are no real-life examples of Tauros2 being used on
248 * such CPUs as of yet.)
249 */
250 if (cpuid_scheme() && (read_mmfr3() & 0xf) == 1) {
251 u32 actlr;
252
253 /*
254 * When Tauros2 is used in an ARMv7 system, the L2
255 * enable bit is located in the Auxiliary System Control
256 * Register (which is the only register allowed by the
257 * ARMv7 spec to contain fine-grained cache control bits).
258 */
259 actlr = read_actlr();
260 if (!(actlr & 0x00000002)) {
261 pr_info("Tauros2: Enabling L2 cache.\n");
262 write_actlr(actlr | 0x00000002);
263 }
264
265 mode = "ARMv7";
266 }
267#endif
268
269 if (mode == NULL) {
270 pr_crit("Tauros2: Unable to detect CPU mode.\n");
271 return;
272 }
273
274 pr_info("Tauros2: L2 cache support initialised "
275 "in %s mode.\n", mode);
276}
277
278#ifdef CONFIG_OF
279static const struct of_device_id tauros2_ids[] __initconst = {
280 { .compatible = "marvell,tauros2-cache"},
281 {}
282};
283#endif
284
285void __init tauros2_init(unsigned int features)
286{
287#ifdef CONFIG_OF
288 struct device_node *node;
289 int ret;
290 unsigned int f;
291
292 node = of_find_matching_node(NULL, tauros2_ids);
293 if (!node) {
294 pr_info("Not found marvell,tauros2-cache, disable it\n");
295 } else {
296 ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f);
297 if (ret) {
298 pr_info("Not found marvell,tauros-cache-features property, "
299 "disable extra features\n");
300 features = 0;
301 } else
302 features = f;
303 }
304#endif
305 tauros2_internal_init(features);
306}
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * arch/arm/mm/cache-tauros2.c - Tauros2 L2 cache controller support
4 *
5 * Copyright (C) 2008 Marvell Semiconductor
6 *
7 * References:
8 * - PJ1 CPU Core Datasheet,
9 * Document ID MV-S104837-01, Rev 0.7, January 24 2008.
10 * - PJ4 CPU Core Datasheet,
11 * Document ID MV-S105190-00, Rev 0.7, March 14 2008.
12 */
13
14#include <linux/init.h>
15#include <linux/of.h>
16#include <linux/of_address.h>
17#include <asm/cacheflush.h>
18#include <asm/cp15.h>
19#include <asm/cputype.h>
20#include <asm/hardware/cache-tauros2.h>
21
22/* CP15 PJ4 Control configuration register */
23#define CCR_L2C_PREFETCH_DISABLE BIT(24)
24#define CCR_L2C_ECC_ENABLE BIT(23)
25#define CCR_L2C_WAY7_4_DISABLE BIT(21)
26#define CCR_L2C_BURST8_ENABLE BIT(20)
27
28/*
29 * When Tauros2 is used on a CPU that supports the v7 hierarchical
30 * cache operations, the cache handling code in proc-v7.S takes care
31 * of everything, including handling DMA coherency.
32 *
33 * So, we only need to register outer cache operations here if we're
34 * being used on a pre-v7 CPU, and we only need to build support for
35 * outer cache operations into the kernel image if the kernel has been
36 * configured to support a pre-v7 CPU.
37 */
38#ifdef CONFIG_CPU_32v5
39/*
40 * Low-level cache maintenance operations.
41 */
42static inline void tauros2_clean_pa(unsigned long addr)
43{
44 __asm__("mcr p15, 1, %0, c7, c11, 3" : : "r" (addr));
45}
46
47static inline void tauros2_clean_inv_pa(unsigned long addr)
48{
49 __asm__("mcr p15, 1, %0, c7, c15, 3" : : "r" (addr));
50}
51
52static inline void tauros2_inv_pa(unsigned long addr)
53{
54 __asm__("mcr p15, 1, %0, c7, c7, 3" : : "r" (addr));
55}
56
57
58/*
59 * Linux primitives.
60 *
61 * Note that the end addresses passed to Linux primitives are
62 * noninclusive.
63 */
64#define CACHE_LINE_SIZE 32
65
66static void tauros2_inv_range(unsigned long start, unsigned long end)
67{
68 /*
69 * Clean and invalidate partial first cache line.
70 */
71 if (start & (CACHE_LINE_SIZE - 1)) {
72 tauros2_clean_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
73 start = (start | (CACHE_LINE_SIZE - 1)) + 1;
74 }
75
76 /*
77 * Clean and invalidate partial last cache line.
78 */
79 if (end & (CACHE_LINE_SIZE - 1)) {
80 tauros2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
81 end &= ~(CACHE_LINE_SIZE - 1);
82 }
83
84 /*
85 * Invalidate all full cache lines between 'start' and 'end'.
86 */
87 while (start < end) {
88 tauros2_inv_pa(start);
89 start += CACHE_LINE_SIZE;
90 }
91
92 dsb();
93}
94
95static void tauros2_clean_range(unsigned long start, unsigned long end)
96{
97 start &= ~(CACHE_LINE_SIZE - 1);
98 while (start < end) {
99 tauros2_clean_pa(start);
100 start += CACHE_LINE_SIZE;
101 }
102
103 dsb();
104}
105
106static void tauros2_flush_range(unsigned long start, unsigned long end)
107{
108 start &= ~(CACHE_LINE_SIZE - 1);
109 while (start < end) {
110 tauros2_clean_inv_pa(start);
111 start += CACHE_LINE_SIZE;
112 }
113
114 dsb();
115}
116
117static void tauros2_disable(void)
118{
119 __asm__ __volatile__ (
120 "mcr p15, 1, %0, c7, c11, 0 @L2 Cache Clean All\n\t"
121 "mrc p15, 0, %0, c1, c0, 0\n\t"
122 "bic %0, %0, #(1 << 26)\n\t"
123 "mcr p15, 0, %0, c1, c0, 0 @Disable L2 Cache\n\t"
124 : : "r" (0x0));
125}
126
127static void tauros2_resume(void)
128{
129 __asm__ __volatile__ (
130 "mcr p15, 1, %0, c7, c7, 0 @L2 Cache Invalidate All\n\t"
131 "mrc p15, 0, %0, c1, c0, 0\n\t"
132 "orr %0, %0, #(1 << 26)\n\t"
133 "mcr p15, 0, %0, c1, c0, 0 @Enable L2 Cache\n\t"
134 : : "r" (0x0));
135}
136#endif
137
138static inline u32 __init read_extra_features(void)
139{
140 u32 u;
141
142 __asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (u));
143
144 return u;
145}
146
147static inline void __init write_extra_features(u32 u)
148{
149 __asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
150}
151
152static inline int __init cpuid_scheme(void)
153{
154 return !!((processor_id & 0x000f0000) == 0x000f0000);
155}
156
157static inline u32 __init read_mmfr3(void)
158{
159 u32 mmfr3;
160
161 __asm__("mrc p15, 0, %0, c0, c1, 7\n" : "=r" (mmfr3));
162
163 return mmfr3;
164}
165
166static inline u32 __init read_actlr(void)
167{
168 u32 actlr;
169
170 __asm__("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr));
171
172 return actlr;
173}
174
175static inline void __init write_actlr(u32 actlr)
176{
177 __asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr));
178}
179
180static void enable_extra_feature(unsigned int features)
181{
182 u32 u;
183
184 u = read_extra_features();
185
186 if (features & CACHE_TAUROS2_PREFETCH_ON)
187 u &= ~CCR_L2C_PREFETCH_DISABLE;
188 else
189 u |= CCR_L2C_PREFETCH_DISABLE;
190 pr_info("Tauros2: %s L2 prefetch.\n",
191 (features & CACHE_TAUROS2_PREFETCH_ON)
192 ? "Enabling" : "Disabling");
193
194 if (features & CACHE_TAUROS2_LINEFILL_BURST8)
195 u |= CCR_L2C_BURST8_ENABLE;
196 else
197 u &= ~CCR_L2C_BURST8_ENABLE;
198 pr_info("Tauros2: %s burst8 line fill.\n",
199 (features & CACHE_TAUROS2_LINEFILL_BURST8)
200 ? "Enabling" : "Disabling");
201
202 write_extra_features(u);
203}
204
205static void __init tauros2_internal_init(unsigned int features)
206{
207 char *mode = NULL;
208
209 enable_extra_feature(features);
210
211#ifdef CONFIG_CPU_32v5
212 if ((processor_id & 0xff0f0000) == 0x56050000) {
213 u32 feat;
214
215 /*
216 * v5 CPUs with Tauros2 have the L2 cache enable bit
217 * located in the CPU Extra Features register.
218 */
219 feat = read_extra_features();
220 if (!(feat & 0x00400000)) {
221 pr_info("Tauros2: Enabling L2 cache.\n");
222 write_extra_features(feat | 0x00400000);
223 }
224
225 mode = "ARMv5";
226 outer_cache.inv_range = tauros2_inv_range;
227 outer_cache.clean_range = tauros2_clean_range;
228 outer_cache.flush_range = tauros2_flush_range;
229 outer_cache.disable = tauros2_disable;
230 outer_cache.resume = tauros2_resume;
231 }
232#endif
233
234#ifdef CONFIG_CPU_32v7
235 /*
236 * Check whether this CPU has support for the v7 hierarchical
237 * cache ops. (PJ4 is in its v7 personality mode if the MMFR3
238 * register indicates support for the v7 hierarchical cache
239 * ops.)
240 *
241 * (Although strictly speaking there may exist CPUs that
242 * implement the v7 cache ops but are only ARMv6 CPUs (due to
243 * not complying with all of the other ARMv7 requirements),
244 * there are no real-life examples of Tauros2 being used on
245 * such CPUs as of yet.)
246 */
247 if (cpuid_scheme() && (read_mmfr3() & 0xf) == 1) {
248 u32 actlr;
249
250 /*
251 * When Tauros2 is used in an ARMv7 system, the L2
252 * enable bit is located in the Auxiliary System Control
253 * Register (which is the only register allowed by the
254 * ARMv7 spec to contain fine-grained cache control bits).
255 */
256 actlr = read_actlr();
257 if (!(actlr & 0x00000002)) {
258 pr_info("Tauros2: Enabling L2 cache.\n");
259 write_actlr(actlr | 0x00000002);
260 }
261
262 mode = "ARMv7";
263 }
264#endif
265
266 if (mode == NULL) {
267 pr_crit("Tauros2: Unable to detect CPU mode.\n");
268 return;
269 }
270
271 pr_info("Tauros2: L2 cache support initialised "
272 "in %s mode.\n", mode);
273}
274
275#ifdef CONFIG_OF
276static const struct of_device_id tauros2_ids[] __initconst = {
277 { .compatible = "marvell,tauros2-cache"},
278 {}
279};
280#endif
281
282void __init tauros2_init(unsigned int features)
283{
284#ifdef CONFIG_OF
285 struct device_node *node;
286 int ret;
287 unsigned int f;
288
289 node = of_find_matching_node(NULL, tauros2_ids);
290 if (!node) {
291 pr_info("Not found marvell,tauros2-cache, disable it\n");
292 } else {
293 ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f);
294 if (ret) {
295 pr_info("Not found marvell,tauros-cache-features property, "
296 "disable extra features\n");
297 features = 0;
298 } else
299 features = f;
300 }
301#endif
302 tauros2_internal_init(features);
303}