Loading...
1/*
2 * Copyright 2012 Red Hat Inc.
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the
6 * "Software"), to deal in the Software without restriction, including
7 * without limitation the rights to use, copy, modify, merge, publish,
8 * distribute, sub license, and/or sell copies of the Software, and to
9 * permit persons to whom the Software is furnished to do so, subject to
10 * the following conditions:
11 *
12 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
13 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
14 * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
15 * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
16 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
17 * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
18 * USE OR OTHER DEALINGS IN THE SOFTWARE.
19 *
20 * The above copyright notice and this permission notice (including the
21 * next paragraph) shall be included in all copies or substantial portions
22 * of the Software.
23 *
24 */
25/*
26 * Authors: Dave Airlie <airlied@redhat.com>
27 */
28
29#include <linux/pci.h>
30
31#include <drm/drm_crtc_helper.h>
32#include <drm/drm_fb_helper.h>
33#include <drm/drm_gem.h>
34#include <drm/drm_gem_framebuffer_helper.h>
35#include <drm/drm_gem_vram_helper.h>
36#include <drm/drm_vram_mm_helper.h>
37
38#include "ast_drv.h"
39
40void ast_set_index_reg_mask(struct ast_private *ast,
41 uint32_t base, uint8_t index,
42 uint8_t mask, uint8_t val)
43{
44 u8 tmp;
45 ast_io_write8(ast, base, index);
46 tmp = (ast_io_read8(ast, base + 1) & mask) | val;
47 ast_set_index_reg(ast, base, index, tmp);
48}
49
50uint8_t ast_get_index_reg(struct ast_private *ast,
51 uint32_t base, uint8_t index)
52{
53 uint8_t ret;
54 ast_io_write8(ast, base, index);
55 ret = ast_io_read8(ast, base + 1);
56 return ret;
57}
58
59uint8_t ast_get_index_reg_mask(struct ast_private *ast,
60 uint32_t base, uint8_t index, uint8_t mask)
61{
62 uint8_t ret;
63 ast_io_write8(ast, base, index);
64 ret = ast_io_read8(ast, base + 1) & mask;
65 return ret;
66}
67
68static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)
69{
70 struct device_node *np = dev->pdev->dev.of_node;
71 struct ast_private *ast = dev->dev_private;
72 uint32_t data, jregd0, jregd1;
73
74 /* Defaults */
75 ast->config_mode = ast_use_defaults;
76 *scu_rev = 0xffffffff;
77
78 /* Check if we have device-tree properties */
79 if (np && !of_property_read_u32(np, "aspeed,scu-revision-id",
80 scu_rev)) {
81 /* We do, disable P2A access */
82 ast->config_mode = ast_use_dt;
83 DRM_INFO("Using device-tree for configuration\n");
84 return;
85 }
86
87 /* Not all families have a P2A bridge */
88 if (dev->pdev->device != PCI_CHIP_AST2000)
89 return;
90
91 /*
92 * The BMC will set SCU 0x40 D[12] to 1 if the P2 bridge
93 * is disabled. We force using P2A if VGA only mode bit
94 * is set D[7]
95 */
96 jregd0 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff);
97 jregd1 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
98 if (!(jregd0 & 0x80) || !(jregd1 & 0x10)) {
99 /* Double check it's actually working */
100 data = ast_read32(ast, 0xf004);
101 if (data != 0xFFFFFFFF) {
102 /* P2A works, grab silicon revision */
103 ast->config_mode = ast_use_p2a;
104
105 DRM_INFO("Using P2A bridge for configuration\n");
106
107 /* Read SCU7c (silicon revision register) */
108 ast_write32(ast, 0xf004, 0x1e6e0000);
109 ast_write32(ast, 0xf000, 0x1);
110 *scu_rev = ast_read32(ast, 0x1207c);
111 return;
112 }
113 }
114
115 /* We have a P2A bridge but it's disabled */
116 DRM_INFO("P2A bridge disabled, using default configuration\n");
117}
118
119static int ast_detect_chip(struct drm_device *dev, bool *need_post)
120{
121 struct ast_private *ast = dev->dev_private;
122 uint32_t jreg, scu_rev;
123
124 /*
125 * If VGA isn't enabled, we need to enable now or subsequent
126 * access to the scratch registers will fail. We also inform
127 * our caller that it needs to POST the chip
128 * (Assumption: VGA not enabled -> need to POST)
129 */
130 if (!ast_is_vga_enabled(dev)) {
131 ast_enable_vga(dev);
132 DRM_INFO("VGA not enabled on entry, requesting chip POST\n");
133 *need_post = true;
134 } else
135 *need_post = false;
136
137
138 /* Enable extended register access */
139 ast_open_key(ast);
140 ast_enable_mmio(dev);
141
142 /* Find out whether P2A works or whether to use device-tree */
143 ast_detect_config_mode(dev, &scu_rev);
144
145 /* Identify chipset */
146 if (dev->pdev->device == PCI_CHIP_AST1180) {
147 ast->chip = AST1100;
148 DRM_INFO("AST 1180 detected\n");
149 } else {
150 if (dev->pdev->revision >= 0x40) {
151 ast->chip = AST2500;
152 DRM_INFO("AST 2500 detected\n");
153 } else if (dev->pdev->revision >= 0x30) {
154 ast->chip = AST2400;
155 DRM_INFO("AST 2400 detected\n");
156 } else if (dev->pdev->revision >= 0x20) {
157 ast->chip = AST2300;
158 DRM_INFO("AST 2300 detected\n");
159 } else if (dev->pdev->revision >= 0x10) {
160 switch (scu_rev & 0x0300) {
161 case 0x0200:
162 ast->chip = AST1100;
163 DRM_INFO("AST 1100 detected\n");
164 break;
165 case 0x0100:
166 ast->chip = AST2200;
167 DRM_INFO("AST 2200 detected\n");
168 break;
169 case 0x0000:
170 ast->chip = AST2150;
171 DRM_INFO("AST 2150 detected\n");
172 break;
173 default:
174 ast->chip = AST2100;
175 DRM_INFO("AST 2100 detected\n");
176 break;
177 }
178 ast->vga2_clone = false;
179 } else {
180 ast->chip = AST2000;
181 DRM_INFO("AST 2000 detected\n");
182 }
183 }
184
185 /* Check if we support wide screen */
186 switch (ast->chip) {
187 case AST1180:
188 ast->support_wide_screen = true;
189 break;
190 case AST2000:
191 ast->support_wide_screen = false;
192 break;
193 default:
194 jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff);
195 if (!(jreg & 0x80))
196 ast->support_wide_screen = true;
197 else if (jreg & 0x01)
198 ast->support_wide_screen = true;
199 else {
200 ast->support_wide_screen = false;
201 if (ast->chip == AST2300 &&
202 (scu_rev & 0x300) == 0x0) /* ast1300 */
203 ast->support_wide_screen = true;
204 if (ast->chip == AST2400 &&
205 (scu_rev & 0x300) == 0x100) /* ast1400 */
206 ast->support_wide_screen = true;
207 if (ast->chip == AST2500 &&
208 scu_rev == 0x100) /* ast2510 */
209 ast->support_wide_screen = true;
210 }
211 break;
212 }
213
214 /* Check 3rd Tx option (digital output afaik) */
215 ast->tx_chip_type = AST_TX_NONE;
216
217 /*
218 * VGACRA3 Enhanced Color Mode Register, check if DVO is already
219 * enabled, in that case, assume we have a SIL164 TMDS transmitter
220 *
221 * Don't make that assumption if we the chip wasn't enabled and
222 * is at power-on reset, otherwise we'll incorrectly "detect" a
223 * SIL164 when there is none.
224 */
225 if (!*need_post) {
226 jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xff);
227 if (jreg & 0x80)
228 ast->tx_chip_type = AST_TX_SIL164;
229 }
230
231 if ((ast->chip == AST2300) || (ast->chip == AST2400)) {
232 /*
233 * On AST2300 and 2400, look the configuration set by the SoC in
234 * the SOC scratch register #1 bits 11:8 (interestingly marked
235 * as "reserved" in the spec)
236 */
237 jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
238 switch (jreg) {
239 case 0x04:
240 ast->tx_chip_type = AST_TX_SIL164;
241 break;
242 case 0x08:
243 ast->dp501_fw_addr = kzalloc(32*1024, GFP_KERNEL);
244 if (ast->dp501_fw_addr) {
245 /* backup firmware */
246 if (ast_backup_fw(dev, ast->dp501_fw_addr, 32*1024)) {
247 kfree(ast->dp501_fw_addr);
248 ast->dp501_fw_addr = NULL;
249 }
250 }
251 /* fallthrough */
252 case 0x0c:
253 ast->tx_chip_type = AST_TX_DP501;
254 }
255 }
256
257 /* Print stuff for diagnostic purposes */
258 switch(ast->tx_chip_type) {
259 case AST_TX_SIL164:
260 DRM_INFO("Using Sil164 TMDS transmitter\n");
261 break;
262 case AST_TX_DP501:
263 DRM_INFO("Using DP501 DisplayPort transmitter\n");
264 break;
265 default:
266 DRM_INFO("Analog VGA only\n");
267 }
268 return 0;
269}
270
271static int ast_get_dram_info(struct drm_device *dev)
272{
273 struct device_node *np = dev->pdev->dev.of_node;
274 struct ast_private *ast = dev->dev_private;
275 uint32_t mcr_cfg, mcr_scu_mpll, mcr_scu_strap;
276 uint32_t denum, num, div, ref_pll, dsel;
277
278 switch (ast->config_mode) {
279 case ast_use_dt:
280 /*
281 * If some properties are missing, use reasonable
282 * defaults for AST2400
283 */
284 if (of_property_read_u32(np, "aspeed,mcr-configuration",
285 &mcr_cfg))
286 mcr_cfg = 0x00000577;
287 if (of_property_read_u32(np, "aspeed,mcr-scu-mpll",
288 &mcr_scu_mpll))
289 mcr_scu_mpll = 0x000050C0;
290 if (of_property_read_u32(np, "aspeed,mcr-scu-strap",
291 &mcr_scu_strap))
292 mcr_scu_strap = 0;
293 break;
294 case ast_use_p2a:
295 ast_write32(ast, 0xf004, 0x1e6e0000);
296 ast_write32(ast, 0xf000, 0x1);
297 mcr_cfg = ast_read32(ast, 0x10004);
298 mcr_scu_mpll = ast_read32(ast, 0x10120);
299 mcr_scu_strap = ast_read32(ast, 0x10170);
300 break;
301 case ast_use_defaults:
302 default:
303 ast->dram_bus_width = 16;
304 ast->dram_type = AST_DRAM_1Gx16;
305 if (ast->chip == AST2500)
306 ast->mclk = 800;
307 else
308 ast->mclk = 396;
309 return 0;
310 }
311
312 if (mcr_cfg & 0x40)
313 ast->dram_bus_width = 16;
314 else
315 ast->dram_bus_width = 32;
316
317 if (ast->chip == AST2500) {
318 switch (mcr_cfg & 0x03) {
319 case 0:
320 ast->dram_type = AST_DRAM_1Gx16;
321 break;
322 default:
323 case 1:
324 ast->dram_type = AST_DRAM_2Gx16;
325 break;
326 case 2:
327 ast->dram_type = AST_DRAM_4Gx16;
328 break;
329 case 3:
330 ast->dram_type = AST_DRAM_8Gx16;
331 break;
332 }
333 } else if (ast->chip == AST2300 || ast->chip == AST2400) {
334 switch (mcr_cfg & 0x03) {
335 case 0:
336 ast->dram_type = AST_DRAM_512Mx16;
337 break;
338 default:
339 case 1:
340 ast->dram_type = AST_DRAM_1Gx16;
341 break;
342 case 2:
343 ast->dram_type = AST_DRAM_2Gx16;
344 break;
345 case 3:
346 ast->dram_type = AST_DRAM_4Gx16;
347 break;
348 }
349 } else {
350 switch (mcr_cfg & 0x0c) {
351 case 0:
352 case 4:
353 ast->dram_type = AST_DRAM_512Mx16;
354 break;
355 case 8:
356 if (mcr_cfg & 0x40)
357 ast->dram_type = AST_DRAM_1Gx16;
358 else
359 ast->dram_type = AST_DRAM_512Mx32;
360 break;
361 case 0xc:
362 ast->dram_type = AST_DRAM_1Gx32;
363 break;
364 }
365 }
366
367 if (mcr_scu_strap & 0x2000)
368 ref_pll = 14318;
369 else
370 ref_pll = 12000;
371
372 denum = mcr_scu_mpll & 0x1f;
373 num = (mcr_scu_mpll & 0x3fe0) >> 5;
374 dsel = (mcr_scu_mpll & 0xc000) >> 14;
375 switch (dsel) {
376 case 3:
377 div = 0x4;
378 break;
379 case 2:
380 case 1:
381 div = 0x2;
382 break;
383 default:
384 div = 0x1;
385 break;
386 }
387 ast->mclk = ref_pll * (num + 2) / ((denum + 2) * (div * 1000));
388 return 0;
389}
390
391static const struct drm_mode_config_funcs ast_mode_funcs = {
392 .fb_create = drm_gem_fb_create
393};
394
395static u32 ast_get_vram_info(struct drm_device *dev)
396{
397 struct ast_private *ast = dev->dev_private;
398 u8 jreg;
399 u32 vram_size;
400 ast_open_key(ast);
401
402 vram_size = AST_VIDMEM_DEFAULT_SIZE;
403 jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xaa, 0xff);
404 switch (jreg & 3) {
405 case 0: vram_size = AST_VIDMEM_SIZE_8M; break;
406 case 1: vram_size = AST_VIDMEM_SIZE_16M; break;
407 case 2: vram_size = AST_VIDMEM_SIZE_32M; break;
408 case 3: vram_size = AST_VIDMEM_SIZE_64M; break;
409 }
410
411 jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x99, 0xff);
412 switch (jreg & 0x03) {
413 case 1:
414 vram_size -= 0x100000;
415 break;
416 case 2:
417 vram_size -= 0x200000;
418 break;
419 case 3:
420 vram_size -= 0x400000;
421 break;
422 }
423
424 return vram_size;
425}
426
427int ast_driver_load(struct drm_device *dev, unsigned long flags)
428{
429 struct ast_private *ast;
430 bool need_post;
431 int ret = 0;
432
433 ast = kzalloc(sizeof(struct ast_private), GFP_KERNEL);
434 if (!ast)
435 return -ENOMEM;
436
437 dev->dev_private = ast;
438 ast->dev = dev;
439
440 ast->regs = pci_iomap(dev->pdev, 1, 0);
441 if (!ast->regs) {
442 ret = -EIO;
443 goto out_free;
444 }
445
446 /*
447 * If we don't have IO space at all, use MMIO now and
448 * assume the chip has MMIO enabled by default (rev 0x20
449 * and higher).
450 */
451 if (!(pci_resource_flags(dev->pdev, 2) & IORESOURCE_IO)) {
452 DRM_INFO("platform has no IO space, trying MMIO\n");
453 ast->ioregs = ast->regs + AST_IO_MM_OFFSET;
454 }
455
456 /* "map" IO regs if the above hasn't done so already */
457 if (!ast->ioregs) {
458 ast->ioregs = pci_iomap(dev->pdev, 2, 0);
459 if (!ast->ioregs) {
460 ret = -EIO;
461 goto out_free;
462 }
463 }
464
465 ast_detect_chip(dev, &need_post);
466
467 if (need_post)
468 ast_post_gpu(dev);
469
470 if (ast->chip != AST1180) {
471 ret = ast_get_dram_info(dev);
472 if (ret)
473 goto out_free;
474 ast->vram_size = ast_get_vram_info(dev);
475 DRM_INFO("dram MCLK=%u Mhz type=%d bus_width=%d size=%08x\n",
476 ast->mclk, ast->dram_type,
477 ast->dram_bus_width, ast->vram_size);
478 }
479
480 ret = ast_mm_init(ast);
481 if (ret)
482 goto out_free;
483
484 drm_mode_config_init(dev);
485
486 dev->mode_config.funcs = (void *)&ast_mode_funcs;
487 dev->mode_config.min_width = 0;
488 dev->mode_config.min_height = 0;
489 dev->mode_config.preferred_depth = 24;
490 dev->mode_config.prefer_shadow = 1;
491 dev->mode_config.fb_base = pci_resource_start(ast->dev->pdev, 0);
492
493 if (ast->chip == AST2100 ||
494 ast->chip == AST2200 ||
495 ast->chip == AST2300 ||
496 ast->chip == AST2400 ||
497 ast->chip == AST2500 ||
498 ast->chip == AST1180) {
499 dev->mode_config.max_width = 1920;
500 dev->mode_config.max_height = 2048;
501 } else {
502 dev->mode_config.max_width = 1600;
503 dev->mode_config.max_height = 1200;
504 }
505
506 ret = ast_mode_init(dev);
507 if (ret)
508 goto out_free;
509
510 ret = drm_fbdev_generic_setup(dev, 32);
511 if (ret)
512 goto out_free;
513
514 return 0;
515out_free:
516 kfree(ast);
517 dev->dev_private = NULL;
518 return ret;
519}
520
521void ast_driver_unload(struct drm_device *dev)
522{
523 struct ast_private *ast = dev->dev_private;
524
525 /* enable standard VGA decode */
526 ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x04);
527
528 ast_release_firmware(dev);
529 kfree(ast->dp501_fw_addr);
530 ast_mode_fini(dev);
531 drm_mode_config_cleanup(dev);
532
533 ast_mm_fini(ast);
534 if (ast->ioregs != ast->regs + AST_IO_MM_OFFSET)
535 pci_iounmap(dev->pdev, ast->ioregs);
536 pci_iounmap(dev->pdev, ast->regs);
537 kfree(ast);
538}
539
540int ast_gem_create(struct drm_device *dev,
541 u32 size, bool iskernel,
542 struct drm_gem_object **obj)
543{
544 struct drm_gem_vram_object *gbo;
545 int ret;
546
547 *obj = NULL;
548
549 size = roundup(size, PAGE_SIZE);
550 if (size == 0)
551 return -EINVAL;
552
553 gbo = drm_gem_vram_create(dev, &dev->vram_mm->bdev, size, 0, false);
554 if (IS_ERR(gbo)) {
555 ret = PTR_ERR(gbo);
556 if (ret != -ERESTARTSYS)
557 DRM_ERROR("failed to allocate GEM object\n");
558 return ret;
559 }
560 *obj = &gbo->bo.base;
561 return 0;
562}
1/*
2 * Copyright 2012 Red Hat Inc.
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the
6 * "Software"), to deal in the Software without restriction, including
7 * without limitation the rights to use, copy, modify, merge, publish,
8 * distribute, sub license, and/or sell copies of the Software, and to
9 * permit persons to whom the Software is furnished to do so, subject to
10 * the following conditions:
11 *
12 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
13 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
14 * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
15 * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
16 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
17 * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
18 * USE OR OTHER DEALINGS IN THE SOFTWARE.
19 *
20 * The above copyright notice and this permission notice (including the
21 * next paragraph) shall be included in all copies or substantial portions
22 * of the Software.
23 *
24 */
25/*
26 * Authors: Dave Airlie <airlied@redhat.com>
27 */
28
29#include <linux/of.h>
30#include <linux/pci.h>
31
32#include <drm/drm_atomic_helper.h>
33#include <drm/drm_drv.h>
34#include <drm/drm_gem.h>
35#include <drm/drm_managed.h>
36
37#include "ast_drv.h"
38
39static void ast_detect_widescreen(struct ast_device *ast)
40{
41 u8 jreg;
42
43 /* Check if we support wide screen */
44 switch (AST_GEN(ast)) {
45 case 1:
46 ast->support_wide_screen = false;
47 break;
48 default:
49 jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd0, 0xff);
50 if (!(jreg & 0x80))
51 ast->support_wide_screen = true;
52 else if (jreg & 0x01)
53 ast->support_wide_screen = true;
54 else {
55 ast->support_wide_screen = false;
56 if (ast->chip == AST1300)
57 ast->support_wide_screen = true;
58 if (ast->chip == AST1400)
59 ast->support_wide_screen = true;
60 if (ast->chip == AST2510)
61 ast->support_wide_screen = true;
62 if (IS_AST_GEN7(ast))
63 ast->support_wide_screen = true;
64 }
65 break;
66 }
67}
68
69static void ast_detect_tx_chip(struct ast_device *ast, bool need_post)
70{
71 static const char * const info_str[] = {
72 "analog VGA",
73 "Sil164 TMDS transmitter",
74 "DP501 DisplayPort transmitter",
75 "ASPEED DisplayPort transmitter",
76 };
77
78 struct drm_device *dev = &ast->base;
79 u8 jreg, vgacrd1;
80
81 /*
82 * Several of the listed TX chips are not explicitly supported
83 * by the ast driver. If these exist in real-world devices, they
84 * are most likely reported as VGA or SIL164 outputs. We warn here
85 * to get bug reports for these devices. If none come in for some
86 * time, we can begin to fail device probing on these values.
87 */
88 vgacrd1 = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd1, AST_IO_VGACRD1_TX_TYPE_MASK);
89 drm_WARN(dev, vgacrd1 == AST_IO_VGACRD1_TX_ITE66121_VBIOS,
90 "ITE IT66121 detected, 0x%x, Gen%lu\n", vgacrd1, AST_GEN(ast));
91 drm_WARN(dev, vgacrd1 == AST_IO_VGACRD1_TX_CH7003_VBIOS,
92 "Chrontel CH7003 detected, 0x%x, Gen%lu\n", vgacrd1, AST_GEN(ast));
93 drm_WARN(dev, vgacrd1 == AST_IO_VGACRD1_TX_ANX9807_VBIOS,
94 "Analogix ANX9807 detected, 0x%x, Gen%lu\n", vgacrd1, AST_GEN(ast));
95
96 /* Check 3rd Tx option (digital output afaik) */
97 ast->tx_chip = AST_TX_NONE;
98
99 /*
100 * VGACRA3 Enhanced Color Mode Register, check if DVO is already
101 * enabled, in that case, assume we have a SIL164 TMDS transmitter
102 *
103 * Don't make that assumption if we the chip wasn't enabled and
104 * is at power-on reset, otherwise we'll incorrectly "detect" a
105 * SIL164 when there is none.
106 */
107 if (!need_post) {
108 jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xa3, 0xff);
109 if (jreg & 0x80)
110 ast->tx_chip = AST_TX_SIL164;
111 }
112
113 if (IS_AST_GEN4(ast) || IS_AST_GEN5(ast) || IS_AST_GEN6(ast)) {
114 /*
115 * On AST GEN4+, look the configuration set by the SoC in
116 * the SOC scratch register #1 bits 11:8 (interestingly marked
117 * as "reserved" in the spec)
118 */
119 jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd1,
120 AST_IO_VGACRD1_TX_TYPE_MASK);
121 switch (jreg) {
122 case AST_IO_VGACRD1_TX_SIL164_VBIOS:
123 ast->tx_chip = AST_TX_SIL164;
124 break;
125 case AST_IO_VGACRD1_TX_DP501_VBIOS:
126 ast->dp501_fw_addr = drmm_kzalloc(dev, 32*1024, GFP_KERNEL);
127 if (ast->dp501_fw_addr) {
128 /* backup firmware */
129 if (ast_backup_fw(ast, ast->dp501_fw_addr, 32*1024)) {
130 drmm_kfree(dev, ast->dp501_fw_addr);
131 ast->dp501_fw_addr = NULL;
132 }
133 }
134 fallthrough;
135 case AST_IO_VGACRD1_TX_FW_EMBEDDED_FW:
136 ast->tx_chip = AST_TX_DP501;
137 }
138 } else if (IS_AST_GEN7(ast)) {
139 if (ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd1, AST_IO_VGACRD1_TX_TYPE_MASK) ==
140 AST_IO_VGACRD1_TX_ASTDP) {
141 int ret = ast_dp_launch(ast);
142
143 if (!ret)
144 ast->tx_chip = AST_TX_ASTDP;
145 }
146 }
147
148 drm_info(dev, "Using %s\n", info_str[ast->tx_chip]);
149}
150
151static int ast_get_dram_info(struct ast_device *ast)
152{
153 struct drm_device *dev = &ast->base;
154 struct device_node *np = dev->dev->of_node;
155 uint32_t mcr_cfg, mcr_scu_mpll, mcr_scu_strap;
156 uint32_t denum, num, div, ref_pll, dsel;
157
158 switch (ast->config_mode) {
159 case ast_use_dt:
160 /*
161 * If some properties are missing, use reasonable
162 * defaults for GEN5
163 */
164 if (of_property_read_u32(np, "aspeed,mcr-configuration",
165 &mcr_cfg))
166 mcr_cfg = 0x00000577;
167 if (of_property_read_u32(np, "aspeed,mcr-scu-mpll",
168 &mcr_scu_mpll))
169 mcr_scu_mpll = 0x000050C0;
170 if (of_property_read_u32(np, "aspeed,mcr-scu-strap",
171 &mcr_scu_strap))
172 mcr_scu_strap = 0;
173 break;
174 case ast_use_p2a:
175 ast_write32(ast, 0xf004, 0x1e6e0000);
176 ast_write32(ast, 0xf000, 0x1);
177 mcr_cfg = ast_read32(ast, 0x10004);
178 mcr_scu_mpll = ast_read32(ast, 0x10120);
179 mcr_scu_strap = ast_read32(ast, 0x10170);
180 break;
181 case ast_use_defaults:
182 default:
183 ast->dram_bus_width = 16;
184 ast->dram_type = AST_DRAM_1Gx16;
185 if (IS_AST_GEN6(ast))
186 ast->mclk = 800;
187 else
188 ast->mclk = 396;
189 return 0;
190 }
191
192 if (mcr_cfg & 0x40)
193 ast->dram_bus_width = 16;
194 else
195 ast->dram_bus_width = 32;
196
197 if (IS_AST_GEN6(ast)) {
198 switch (mcr_cfg & 0x03) {
199 case 0:
200 ast->dram_type = AST_DRAM_1Gx16;
201 break;
202 default:
203 case 1:
204 ast->dram_type = AST_DRAM_2Gx16;
205 break;
206 case 2:
207 ast->dram_type = AST_DRAM_4Gx16;
208 break;
209 case 3:
210 ast->dram_type = AST_DRAM_8Gx16;
211 break;
212 }
213 } else if (IS_AST_GEN4(ast) || IS_AST_GEN5(ast)) {
214 switch (mcr_cfg & 0x03) {
215 case 0:
216 ast->dram_type = AST_DRAM_512Mx16;
217 break;
218 default:
219 case 1:
220 ast->dram_type = AST_DRAM_1Gx16;
221 break;
222 case 2:
223 ast->dram_type = AST_DRAM_2Gx16;
224 break;
225 case 3:
226 ast->dram_type = AST_DRAM_4Gx16;
227 break;
228 }
229 } else {
230 switch (mcr_cfg & 0x0c) {
231 case 0:
232 case 4:
233 ast->dram_type = AST_DRAM_512Mx16;
234 break;
235 case 8:
236 if (mcr_cfg & 0x40)
237 ast->dram_type = AST_DRAM_1Gx16;
238 else
239 ast->dram_type = AST_DRAM_512Mx32;
240 break;
241 case 0xc:
242 ast->dram_type = AST_DRAM_1Gx32;
243 break;
244 }
245 }
246
247 if (mcr_scu_strap & 0x2000)
248 ref_pll = 14318;
249 else
250 ref_pll = 12000;
251
252 denum = mcr_scu_mpll & 0x1f;
253 num = (mcr_scu_mpll & 0x3fe0) >> 5;
254 dsel = (mcr_scu_mpll & 0xc000) >> 14;
255 switch (dsel) {
256 case 3:
257 div = 0x4;
258 break;
259 case 2:
260 case 1:
261 div = 0x2;
262 break;
263 default:
264 div = 0x1;
265 break;
266 }
267 ast->mclk = ref_pll * (num + 2) / ((denum + 2) * (div * 1000));
268 return 0;
269}
270
271struct drm_device *ast_device_create(struct pci_dev *pdev,
272 const struct drm_driver *drv,
273 enum ast_chip chip,
274 enum ast_config_mode config_mode,
275 void __iomem *regs,
276 void __iomem *ioregs,
277 bool need_post)
278{
279 struct drm_device *dev;
280 struct ast_device *ast;
281 int ret;
282
283 ast = devm_drm_dev_alloc(&pdev->dev, drv, struct ast_device, base);
284 if (IS_ERR(ast))
285 return ERR_CAST(ast);
286 dev = &ast->base;
287
288 ast->chip = chip;
289 ast->config_mode = config_mode;
290 ast->regs = regs;
291 ast->ioregs = ioregs;
292
293 ast_detect_widescreen(ast);
294 ast_detect_tx_chip(ast, need_post);
295
296 ret = ast_get_dram_info(ast);
297 if (ret)
298 return ERR_PTR(ret);
299
300 drm_info(dev, "dram MCLK=%u Mhz type=%d bus_width=%d\n",
301 ast->mclk, ast->dram_type, ast->dram_bus_width);
302
303 if (need_post)
304 ast_post_gpu(ast);
305
306 ret = ast_mm_init(ast);
307 if (ret)
308 return ERR_PTR(ret);
309
310 /* map reserved buffer */
311 ast->dp501_fw_buf = NULL;
312 if (ast->vram_size < pci_resource_len(pdev, 0)) {
313 ast->dp501_fw_buf = pci_iomap_range(pdev, 0, ast->vram_size, 0);
314 if (!ast->dp501_fw_buf)
315 drm_info(dev, "failed to map reserved buffer!\n");
316 }
317
318 ret = ast_mode_config_init(ast);
319 if (ret)
320 return ERR_PTR(ret);
321
322 return dev;
323}