Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2#include <linux/export.h>
3#include <linux/bitops.h>
4#include <linux/elf.h>
5#include <linux/mm.h>
6
7#include <linux/io.h>
8#include <linux/sched.h>
9#include <linux/sched/clock.h>
10#include <linux/random.h>
11#include <linux/topology.h>
12#include <asm/processor.h>
13#include <asm/apic.h>
14#include <asm/cacheinfo.h>
15#include <asm/cpu.h>
16#include <asm/spec-ctrl.h>
17#include <asm/smp.h>
18#include <asm/pci-direct.h>
19#include <asm/delay.h>
20#include <asm/debugreg.h>
21
22#ifdef CONFIG_X86_64
23# include <asm/mmconfig.h>
24# include <asm/set_memory.h>
25#endif
26
27#include "cpu.h"
28
29static const int amd_erratum_383[];
30static const int amd_erratum_400[];
31static bool cpu_has_amd_erratum(struct cpuinfo_x86 *cpu, const int *erratum);
32
33/*
34 * nodes_per_socket: Stores the number of nodes per socket.
35 * Refer to Fam15h Models 00-0fh BKDG - CPUID Fn8000_001E_ECX
36 * Node Identifiers[10:8]
37 */
38static u32 nodes_per_socket = 1;
39
40static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
41{
42 u32 gprs[8] = { 0 };
43 int err;
44
45 WARN_ONCE((boot_cpu_data.x86 != 0xf),
46 "%s should only be used on K8!\n", __func__);
47
48 gprs[1] = msr;
49 gprs[7] = 0x9c5a203a;
50
51 err = rdmsr_safe_regs(gprs);
52
53 *p = gprs[0] | ((u64)gprs[2] << 32);
54
55 return err;
56}
57
58static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
59{
60 u32 gprs[8] = { 0 };
61
62 WARN_ONCE((boot_cpu_data.x86 != 0xf),
63 "%s should only be used on K8!\n", __func__);
64
65 gprs[0] = (u32)val;
66 gprs[1] = msr;
67 gprs[2] = val >> 32;
68 gprs[7] = 0x9c5a203a;
69
70 return wrmsr_safe_regs(gprs);
71}
72
73/*
74 * B step AMD K6 before B 9730xxxx have hardware bugs that can cause
75 * misexecution of code under Linux. Owners of such processors should
76 * contact AMD for precise details and a CPU swap.
77 *
78 * See http://www.multimania.com/poulot/k6bug.html
79 * and section 2.6.2 of "AMD-K6 Processor Revision Guide - Model 6"
80 * (Publication # 21266 Issue Date: August 1998)
81 *
82 * The following test is erm.. interesting. AMD neglected to up
83 * the chip setting when fixing the bug but they also tweaked some
84 * performance at the same time..
85 */
86
87#ifdef CONFIG_X86_32
88extern __visible void vide(void);
89__asm__(".text\n"
90 ".globl vide\n"
91 ".type vide, @function\n"
92 ".align 4\n"
93 "vide: ret\n");
94#endif
95
96static void init_amd_k5(struct cpuinfo_x86 *c)
97{
98#ifdef CONFIG_X86_32
99/*
100 * General Systems BIOSen alias the cpu frequency registers
101 * of the Elan at 0x000df000. Unfortunately, one of the Linux
102 * drivers subsequently pokes it, and changes the CPU speed.
103 * Workaround : Remove the unneeded alias.
104 */
105#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */
106#define CBAR_ENB (0x80000000)
107#define CBAR_KEY (0X000000CB)
108 if (c->x86_model == 9 || c->x86_model == 10) {
109 if (inl(CBAR) & CBAR_ENB)
110 outl(0 | CBAR_KEY, CBAR);
111 }
112#endif
113}
114
115static void init_amd_k6(struct cpuinfo_x86 *c)
116{
117#ifdef CONFIG_X86_32
118 u32 l, h;
119 int mbytes = get_num_physpages() >> (20-PAGE_SHIFT);
120
121 if (c->x86_model < 6) {
122 /* Based on AMD doc 20734R - June 2000 */
123 if (c->x86_model == 0) {
124 clear_cpu_cap(c, X86_FEATURE_APIC);
125 set_cpu_cap(c, X86_FEATURE_PGE);
126 }
127 return;
128 }
129
130 if (c->x86_model == 6 && c->x86_stepping == 1) {
131 const int K6_BUG_LOOP = 1000000;
132 int n;
133 void (*f_vide)(void);
134 u64 d, d2;
135
136 pr_info("AMD K6 stepping B detected - ");
137
138 /*
139 * It looks like AMD fixed the 2.6.2 bug and improved indirect
140 * calls at the same time.
141 */
142
143 n = K6_BUG_LOOP;
144 f_vide = vide;
145 OPTIMIZER_HIDE_VAR(f_vide);
146 d = rdtsc();
147 while (n--)
148 f_vide();
149 d2 = rdtsc();
150 d = d2-d;
151
152 if (d > 20*K6_BUG_LOOP)
153 pr_cont("system stability may be impaired when more than 32 MB are used.\n");
154 else
155 pr_cont("probably OK (after B9730xxxx).\n");
156 }
157
158 /* K6 with old style WHCR */
159 if (c->x86_model < 8 ||
160 (c->x86_model == 8 && c->x86_stepping < 8)) {
161 /* We can only write allocate on the low 508Mb */
162 if (mbytes > 508)
163 mbytes = 508;
164
165 rdmsr(MSR_K6_WHCR, l, h);
166 if ((l&0x0000FFFF) == 0) {
167 unsigned long flags;
168 l = (1<<0)|((mbytes/4)<<1);
169 local_irq_save(flags);
170 wbinvd();
171 wrmsr(MSR_K6_WHCR, l, h);
172 local_irq_restore(flags);
173 pr_info("Enabling old style K6 write allocation for %d Mb\n",
174 mbytes);
175 }
176 return;
177 }
178
179 if ((c->x86_model == 8 && c->x86_stepping > 7) ||
180 c->x86_model == 9 || c->x86_model == 13) {
181 /* The more serious chips .. */
182
183 if (mbytes > 4092)
184 mbytes = 4092;
185
186 rdmsr(MSR_K6_WHCR, l, h);
187 if ((l&0xFFFF0000) == 0) {
188 unsigned long flags;
189 l = ((mbytes>>2)<<22)|(1<<16);
190 local_irq_save(flags);
191 wbinvd();
192 wrmsr(MSR_K6_WHCR, l, h);
193 local_irq_restore(flags);
194 pr_info("Enabling new style K6 write allocation for %d Mb\n",
195 mbytes);
196 }
197
198 return;
199 }
200
201 if (c->x86_model == 10) {
202 /* AMD Geode LX is model 10 */
203 /* placeholder for any needed mods */
204 return;
205 }
206#endif
207}
208
209static void init_amd_k7(struct cpuinfo_x86 *c)
210{
211#ifdef CONFIG_X86_32
212 u32 l, h;
213
214 /*
215 * Bit 15 of Athlon specific MSR 15, needs to be 0
216 * to enable SSE on Palomino/Morgan/Barton CPU's.
217 * If the BIOS didn't enable it already, enable it here.
218 */
219 if (c->x86_model >= 6 && c->x86_model <= 10) {
220 if (!cpu_has(c, X86_FEATURE_XMM)) {
221 pr_info("Enabling disabled K7/SSE Support.\n");
222 msr_clear_bit(MSR_K7_HWCR, 15);
223 set_cpu_cap(c, X86_FEATURE_XMM);
224 }
225 }
226
227 /*
228 * It's been determined by AMD that Athlons since model 8 stepping 1
229 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
230 * As per AMD technical note 27212 0.2
231 */
232 if ((c->x86_model == 8 && c->x86_stepping >= 1) || (c->x86_model > 8)) {
233 rdmsr(MSR_K7_CLK_CTL, l, h);
234 if ((l & 0xfff00000) != 0x20000000) {
235 pr_info("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n",
236 l, ((l & 0x000fffff)|0x20000000));
237 wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
238 }
239 }
240
241 /* calling is from identify_secondary_cpu() ? */
242 if (!c->cpu_index)
243 return;
244
245 /*
246 * Certain Athlons might work (for various values of 'work') in SMP
247 * but they are not certified as MP capable.
248 */
249 /* Athlon 660/661 is valid. */
250 if ((c->x86_model == 6) && ((c->x86_stepping == 0) ||
251 (c->x86_stepping == 1)))
252 return;
253
254 /* Duron 670 is valid */
255 if ((c->x86_model == 7) && (c->x86_stepping == 0))
256 return;
257
258 /*
259 * Athlon 662, Duron 671, and Athlon >model 7 have capability
260 * bit. It's worth noting that the A5 stepping (662) of some
261 * Athlon XP's have the MP bit set.
262 * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for
263 * more.
264 */
265 if (((c->x86_model == 6) && (c->x86_stepping >= 2)) ||
266 ((c->x86_model == 7) && (c->x86_stepping >= 1)) ||
267 (c->x86_model > 7))
268 if (cpu_has(c, X86_FEATURE_MP))
269 return;
270
271 /* If we get here, not a certified SMP capable AMD system. */
272
273 /*
274 * Don't taint if we are running SMP kernel on a single non-MP
275 * approved Athlon
276 */
277 WARN_ONCE(1, "WARNING: This combination of AMD"
278 " processors is not suitable for SMP.\n");
279 add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_NOW_UNRELIABLE);
280#endif
281}
282
283#ifdef CONFIG_NUMA
284/*
285 * To workaround broken NUMA config. Read the comment in
286 * srat_detect_node().
287 */
288static int nearby_node(int apicid)
289{
290 int i, node;
291
292 for (i = apicid - 1; i >= 0; i--) {
293 node = __apicid_to_node[i];
294 if (node != NUMA_NO_NODE && node_online(node))
295 return node;
296 }
297 for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
298 node = __apicid_to_node[i];
299 if (node != NUMA_NO_NODE && node_online(node))
300 return node;
301 }
302 return first_node(node_online_map); /* Shouldn't happen */
303}
304#endif
305
306/*
307 * Fix up cpu_core_id for pre-F17h systems to be in the
308 * [0 .. cores_per_node - 1] range. Not really needed but
309 * kept so as not to break existing setups.
310 */
311static void legacy_fixup_core_id(struct cpuinfo_x86 *c)
312{
313 u32 cus_per_node;
314
315 if (c->x86 >= 0x17)
316 return;
317
318 cus_per_node = c->x86_max_cores / nodes_per_socket;
319 c->cpu_core_id %= cus_per_node;
320}
321
322
323static void amd_get_topology_early(struct cpuinfo_x86 *c)
324{
325 if (cpu_has(c, X86_FEATURE_TOPOEXT))
326 smp_num_siblings = ((cpuid_ebx(0x8000001e) >> 8) & 0xff) + 1;
327}
328
329/*
330 * Fixup core topology information for
331 * (1) AMD multi-node processors
332 * Assumption: Number of cores in each internal node is the same.
333 * (2) AMD processors supporting compute units
334 */
335static void amd_get_topology(struct cpuinfo_x86 *c)
336{
337 u8 node_id;
338 int cpu = smp_processor_id();
339
340 /* get information required for multi-node processors */
341 if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
342 int err;
343 u32 eax, ebx, ecx, edx;
344
345 cpuid(0x8000001e, &eax, &ebx, &ecx, &edx);
346
347 node_id = ecx & 0xff;
348
349 if (c->x86 == 0x15)
350 c->cu_id = ebx & 0xff;
351
352 if (c->x86 >= 0x17) {
353 c->cpu_core_id = ebx & 0xff;
354
355 if (smp_num_siblings > 1)
356 c->x86_max_cores /= smp_num_siblings;
357 }
358
359 /*
360 * In case leaf B is available, use it to derive
361 * topology information.
362 */
363 err = detect_extended_topology(c);
364 if (!err)
365 c->x86_coreid_bits = get_count_order(c->x86_max_cores);
366
367 cacheinfo_amd_init_llc_id(c, cpu, node_id);
368
369 } else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) {
370 u64 value;
371
372 rdmsrl(MSR_FAM10H_NODE_ID, value);
373 node_id = value & 7;
374
375 per_cpu(cpu_llc_id, cpu) = node_id;
376 } else
377 return;
378
379 if (nodes_per_socket > 1) {
380 set_cpu_cap(c, X86_FEATURE_AMD_DCM);
381 legacy_fixup_core_id(c);
382 }
383}
384
385/*
386 * On a AMD dual core setup the lower bits of the APIC id distinguish the cores.
387 * Assumes number of cores is a power of two.
388 */
389static void amd_detect_cmp(struct cpuinfo_x86 *c)
390{
391 unsigned bits;
392 int cpu = smp_processor_id();
393
394 bits = c->x86_coreid_bits;
395 /* Low order bits define the core id (index of core in socket) */
396 c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
397 /* Convert the initial APIC ID into the socket ID */
398 c->phys_proc_id = c->initial_apicid >> bits;
399 /* use socket ID also for last level cache */
400 per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
401}
402
403u16 amd_get_nb_id(int cpu)
404{
405 return per_cpu(cpu_llc_id, cpu);
406}
407EXPORT_SYMBOL_GPL(amd_get_nb_id);
408
409u32 amd_get_nodes_per_socket(void)
410{
411 return nodes_per_socket;
412}
413EXPORT_SYMBOL_GPL(amd_get_nodes_per_socket);
414
415static void srat_detect_node(struct cpuinfo_x86 *c)
416{
417#ifdef CONFIG_NUMA
418 int cpu = smp_processor_id();
419 int node;
420 unsigned apicid = c->apicid;
421
422 node = numa_cpu_node(cpu);
423 if (node == NUMA_NO_NODE)
424 node = per_cpu(cpu_llc_id, cpu);
425
426 /*
427 * On multi-fabric platform (e.g. Numascale NumaChip) a
428 * platform-specific handler needs to be called to fixup some
429 * IDs of the CPU.
430 */
431 if (x86_cpuinit.fixup_cpu_id)
432 x86_cpuinit.fixup_cpu_id(c, node);
433
434 if (!node_online(node)) {
435 /*
436 * Two possibilities here:
437 *
438 * - The CPU is missing memory and no node was created. In
439 * that case try picking one from a nearby CPU.
440 *
441 * - The APIC IDs differ from the HyperTransport node IDs
442 * which the K8 northbridge parsing fills in. Assume
443 * they are all increased by a constant offset, but in
444 * the same order as the HT nodeids. If that doesn't
445 * result in a usable node fall back to the path for the
446 * previous case.
447 *
448 * This workaround operates directly on the mapping between
449 * APIC ID and NUMA node, assuming certain relationship
450 * between APIC ID, HT node ID and NUMA topology. As going
451 * through CPU mapping may alter the outcome, directly
452 * access __apicid_to_node[].
453 */
454 int ht_nodeid = c->initial_apicid;
455
456 if (__apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
457 node = __apicid_to_node[ht_nodeid];
458 /* Pick a nearby node */
459 if (!node_online(node))
460 node = nearby_node(apicid);
461 }
462 numa_set_node(cpu, node);
463#endif
464}
465
466static void early_init_amd_mc(struct cpuinfo_x86 *c)
467{
468#ifdef CONFIG_SMP
469 unsigned bits, ecx;
470
471 /* Multi core CPU? */
472 if (c->extended_cpuid_level < 0x80000008)
473 return;
474
475 ecx = cpuid_ecx(0x80000008);
476
477 c->x86_max_cores = (ecx & 0xff) + 1;
478
479 /* CPU telling us the core id bits shift? */
480 bits = (ecx >> 12) & 0xF;
481
482 /* Otherwise recompute */
483 if (bits == 0) {
484 while ((1 << bits) < c->x86_max_cores)
485 bits++;
486 }
487
488 c->x86_coreid_bits = bits;
489#endif
490}
491
492static void bsp_init_amd(struct cpuinfo_x86 *c)
493{
494
495#ifdef CONFIG_X86_64
496 if (c->x86 >= 0xf) {
497 unsigned long long tseg;
498
499 /*
500 * Split up direct mapping around the TSEG SMM area.
501 * Don't do it for gbpages because there seems very little
502 * benefit in doing so.
503 */
504 if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
505 unsigned long pfn = tseg >> PAGE_SHIFT;
506
507 pr_debug("tseg: %010llx\n", tseg);
508 if (pfn_range_is_mapped(pfn, pfn + 1))
509 set_memory_4k((unsigned long)__va(tseg), 1);
510 }
511 }
512#endif
513
514 if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
515
516 if (c->x86 > 0x10 ||
517 (c->x86 == 0x10 && c->x86_model >= 0x2)) {
518 u64 val;
519
520 rdmsrl(MSR_K7_HWCR, val);
521 if (!(val & BIT(24)))
522 pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n");
523 }
524 }
525
526 if (c->x86 == 0x15) {
527 unsigned long upperbit;
528 u32 cpuid, assoc;
529
530 cpuid = cpuid_edx(0x80000005);
531 assoc = cpuid >> 16 & 0xff;
532 upperbit = ((cpuid >> 24) << 10) / assoc;
533
534 va_align.mask = (upperbit - 1) & PAGE_MASK;
535 va_align.flags = ALIGN_VA_32 | ALIGN_VA_64;
536
537 /* A random value per boot for bit slice [12:upper_bit) */
538 va_align.bits = get_random_int() & va_align.mask;
539 }
540
541 if (cpu_has(c, X86_FEATURE_MWAITX))
542 use_mwaitx_delay();
543
544 if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
545 u32 ecx;
546
547 ecx = cpuid_ecx(0x8000001e);
548 nodes_per_socket = ((ecx >> 8) & 7) + 1;
549 } else if (boot_cpu_has(X86_FEATURE_NODEID_MSR)) {
550 u64 value;
551
552 rdmsrl(MSR_FAM10H_NODE_ID, value);
553 nodes_per_socket = ((value >> 3) & 7) + 1;
554 }
555
556 if (!boot_cpu_has(X86_FEATURE_AMD_SSBD) &&
557 !boot_cpu_has(X86_FEATURE_VIRT_SSBD) &&
558 c->x86 >= 0x15 && c->x86 <= 0x17) {
559 unsigned int bit;
560
561 switch (c->x86) {
562 case 0x15: bit = 54; break;
563 case 0x16: bit = 33; break;
564 case 0x17: bit = 10; break;
565 default: return;
566 }
567 /*
568 * Try to cache the base value so further operations can
569 * avoid RMW. If that faults, do not enable SSBD.
570 */
571 if (!rdmsrl_safe(MSR_AMD64_LS_CFG, &x86_amd_ls_cfg_base)) {
572 setup_force_cpu_cap(X86_FEATURE_LS_CFG_SSBD);
573 setup_force_cpu_cap(X86_FEATURE_SSBD);
574 x86_amd_ls_cfg_ssbd_mask = 1ULL << bit;
575 }
576 }
577}
578
579static void early_detect_mem_encrypt(struct cpuinfo_x86 *c)
580{
581 u64 msr;
582
583 /*
584 * BIOS support is required for SME and SEV.
585 * For SME: If BIOS has enabled SME then adjust x86_phys_bits by
586 * the SME physical address space reduction value.
587 * If BIOS has not enabled SME then don't advertise the
588 * SME feature (set in scattered.c).
589 * For SEV: If BIOS has not enabled SEV then don't advertise the
590 * SEV feature (set in scattered.c).
591 *
592 * In all cases, since support for SME and SEV requires long mode,
593 * don't advertise the feature under CONFIG_X86_32.
594 */
595 if (cpu_has(c, X86_FEATURE_SME) || cpu_has(c, X86_FEATURE_SEV)) {
596 /* Check if memory encryption is enabled */
597 rdmsrl(MSR_K8_SYSCFG, msr);
598 if (!(msr & MSR_K8_SYSCFG_MEM_ENCRYPT))
599 goto clear_all;
600
601 /*
602 * Always adjust physical address bits. Even though this
603 * will be a value above 32-bits this is still done for
604 * CONFIG_X86_32 so that accurate values are reported.
605 */
606 c->x86_phys_bits -= (cpuid_ebx(0x8000001f) >> 6) & 0x3f;
607
608 if (IS_ENABLED(CONFIG_X86_32))
609 goto clear_all;
610
611 rdmsrl(MSR_K7_HWCR, msr);
612 if (!(msr & MSR_K7_HWCR_SMMLOCK))
613 goto clear_sev;
614
615 return;
616
617clear_all:
618 clear_cpu_cap(c, X86_FEATURE_SME);
619clear_sev:
620 clear_cpu_cap(c, X86_FEATURE_SEV);
621 }
622}
623
624static void early_init_amd(struct cpuinfo_x86 *c)
625{
626 u64 value;
627 u32 dummy;
628
629 early_init_amd_mc(c);
630
631#ifdef CONFIG_X86_32
632 if (c->x86 == 6)
633 set_cpu_cap(c, X86_FEATURE_K7);
634#endif
635
636 if (c->x86 >= 0xf)
637 set_cpu_cap(c, X86_FEATURE_K8);
638
639 rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy);
640
641 /*
642 * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate
643 * with P/T states and does not stop in deep C-states
644 */
645 if (c->x86_power & (1 << 8)) {
646 set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
647 set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
648 }
649
650 /* Bit 12 of 8000_0007 edx is accumulated power mechanism. */
651 if (c->x86_power & BIT(12))
652 set_cpu_cap(c, X86_FEATURE_ACC_POWER);
653
654#ifdef CONFIG_X86_64
655 set_cpu_cap(c, X86_FEATURE_SYSCALL32);
656#else
657 /* Set MTRR capability flag if appropriate */
658 if (c->x86 == 5)
659 if (c->x86_model == 13 || c->x86_model == 9 ||
660 (c->x86_model == 8 && c->x86_stepping >= 8))
661 set_cpu_cap(c, X86_FEATURE_K6_MTRR);
662#endif
663#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
664 /*
665 * ApicID can always be treated as an 8-bit value for AMD APIC versions
666 * >= 0x10, but even old K8s came out of reset with version 0x10. So, we
667 * can safely set X86_FEATURE_EXTD_APICID unconditionally for families
668 * after 16h.
669 */
670 if (boot_cpu_has(X86_FEATURE_APIC)) {
671 if (c->x86 > 0x16)
672 set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
673 else if (c->x86 >= 0xf) {
674 /* check CPU config space for extended APIC ID */
675 unsigned int val;
676
677 val = read_pci_config(0, 24, 0, 0x68);
678 if ((val >> 17 & 0x3) == 0x3)
679 set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
680 }
681 }
682#endif
683
684 /*
685 * This is only needed to tell the kernel whether to use VMCALL
686 * and VMMCALL. VMMCALL is never executed except under virt, so
687 * we can set it unconditionally.
688 */
689 set_cpu_cap(c, X86_FEATURE_VMMCALL);
690
691 /* F16h erratum 793, CVE-2013-6885 */
692 if (c->x86 == 0x16 && c->x86_model <= 0xf)
693 msr_set_bit(MSR_AMD64_LS_CFG, 15);
694
695 /*
696 * Check whether the machine is affected by erratum 400. This is
697 * used to select the proper idle routine and to enable the check
698 * whether the machine is affected in arch_post_acpi_init(), which
699 * sets the X86_BUG_AMD_APIC_C1E bug depending on the MSR check.
700 */
701 if (cpu_has_amd_erratum(c, amd_erratum_400))
702 set_cpu_bug(c, X86_BUG_AMD_E400);
703
704 early_detect_mem_encrypt(c);
705
706 /* Re-enable TopologyExtensions if switched off by BIOS */
707 if (c->x86 == 0x15 &&
708 (c->x86_model >= 0x10 && c->x86_model <= 0x6f) &&
709 !cpu_has(c, X86_FEATURE_TOPOEXT)) {
710
711 if (msr_set_bit(0xc0011005, 54) > 0) {
712 rdmsrl(0xc0011005, value);
713 if (value & BIT_64(54)) {
714 set_cpu_cap(c, X86_FEATURE_TOPOEXT);
715 pr_info_once(FW_INFO "CPU: Re-enabling disabled Topology Extensions Support.\n");
716 }
717 }
718 }
719
720 amd_get_topology_early(c);
721}
722
723static void init_amd_k8(struct cpuinfo_x86 *c)
724{
725 u32 level;
726 u64 value;
727
728 /* On C+ stepping K8 rep microcode works well for copy/memset */
729 level = cpuid_eax(1);
730 if ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
731 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
732
733 /*
734 * Some BIOSes incorrectly force this feature, but only K8 revision D
735 * (model = 0x14) and later actually support it.
736 * (AMD Erratum #110, docId: 25759).
737 */
738 if (c->x86_model < 0x14 && cpu_has(c, X86_FEATURE_LAHF_LM)) {
739 clear_cpu_cap(c, X86_FEATURE_LAHF_LM);
740 if (!rdmsrl_amd_safe(0xc001100d, &value)) {
741 value &= ~BIT_64(32);
742 wrmsrl_amd_safe(0xc001100d, value);
743 }
744 }
745
746 if (!c->x86_model_id[0])
747 strcpy(c->x86_model_id, "Hammer");
748
749#ifdef CONFIG_SMP
750 /*
751 * Disable TLB flush filter by setting HWCR.FFDIS on K8
752 * bit 6 of msr C001_0015
753 *
754 * Errata 63 for SH-B3 steppings
755 * Errata 122 for all steppings (F+ have it disabled by default)
756 */
757 msr_set_bit(MSR_K7_HWCR, 6);
758#endif
759 set_cpu_bug(c, X86_BUG_SWAPGS_FENCE);
760}
761
762static void init_amd_gh(struct cpuinfo_x86 *c)
763{
764#ifdef CONFIG_MMCONF_FAM10H
765 /* do this for boot cpu */
766 if (c == &boot_cpu_data)
767 check_enable_amd_mmconf_dmi();
768
769 fam10h_check_enable_mmcfg();
770#endif
771
772 /*
773 * Disable GART TLB Walk Errors on Fam10h. We do this here because this
774 * is always needed when GART is enabled, even in a kernel which has no
775 * MCE support built in. BIOS should disable GartTlbWlk Errors already.
776 * If it doesn't, we do it here as suggested by the BKDG.
777 *
778 * Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33012
779 */
780 msr_set_bit(MSR_AMD64_MCx_MASK(4), 10);
781
782 /*
783 * On family 10h BIOS may not have properly enabled WC+ support, causing
784 * it to be converted to CD memtype. This may result in performance
785 * degradation for certain nested-paging guests. Prevent this conversion
786 * by clearing bit 24 in MSR_AMD64_BU_CFG2.
787 *
788 * NOTE: we want to use the _safe accessors so as not to #GP kvm
789 * guests on older kvm hosts.
790 */
791 msr_clear_bit(MSR_AMD64_BU_CFG2, 24);
792
793 if (cpu_has_amd_erratum(c, amd_erratum_383))
794 set_cpu_bug(c, X86_BUG_AMD_TLB_MMATCH);
795}
796
797#define MSR_AMD64_DE_CFG 0xC0011029
798
799static void init_amd_ln(struct cpuinfo_x86 *c)
800{
801 /*
802 * Apply erratum 665 fix unconditionally so machines without a BIOS
803 * fix work.
804 */
805 msr_set_bit(MSR_AMD64_DE_CFG, 31);
806}
807
808static bool rdrand_force;
809
810static int __init rdrand_cmdline(char *str)
811{
812 if (!str)
813 return -EINVAL;
814
815 if (!strcmp(str, "force"))
816 rdrand_force = true;
817 else
818 return -EINVAL;
819
820 return 0;
821}
822early_param("rdrand", rdrand_cmdline);
823
824static void clear_rdrand_cpuid_bit(struct cpuinfo_x86 *c)
825{
826 /*
827 * Saving of the MSR used to hide the RDRAND support during
828 * suspend/resume is done by arch/x86/power/cpu.c, which is
829 * dependent on CONFIG_PM_SLEEP.
830 */
831 if (!IS_ENABLED(CONFIG_PM_SLEEP))
832 return;
833
834 /*
835 * The nordrand option can clear X86_FEATURE_RDRAND, so check for
836 * RDRAND support using the CPUID function directly.
837 */
838 if (!(cpuid_ecx(1) & BIT(30)) || rdrand_force)
839 return;
840
841 msr_clear_bit(MSR_AMD64_CPUID_FN_1, 62);
842
843 /*
844 * Verify that the CPUID change has occurred in case the kernel is
845 * running virtualized and the hypervisor doesn't support the MSR.
846 */
847 if (cpuid_ecx(1) & BIT(30)) {
848 pr_info_once("BIOS may not properly restore RDRAND after suspend, but hypervisor does not support hiding RDRAND via CPUID.\n");
849 return;
850 }
851
852 clear_cpu_cap(c, X86_FEATURE_RDRAND);
853 pr_info_once("BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.\n");
854}
855
856static void init_amd_jg(struct cpuinfo_x86 *c)
857{
858 /*
859 * Some BIOS implementations do not restore proper RDRAND support
860 * across suspend and resume. Check on whether to hide the RDRAND
861 * instruction support via CPUID.
862 */
863 clear_rdrand_cpuid_bit(c);
864}
865
866static void init_amd_bd(struct cpuinfo_x86 *c)
867{
868 u64 value;
869
870 /*
871 * The way access filter has a performance penalty on some workloads.
872 * Disable it on the affected CPUs.
873 */
874 if ((c->x86_model >= 0x02) && (c->x86_model < 0x20)) {
875 if (!rdmsrl_safe(MSR_F15H_IC_CFG, &value) && !(value & 0x1E)) {
876 value |= 0x1E;
877 wrmsrl_safe(MSR_F15H_IC_CFG, value);
878 }
879 }
880
881 /*
882 * Some BIOS implementations do not restore proper RDRAND support
883 * across suspend and resume. Check on whether to hide the RDRAND
884 * instruction support via CPUID.
885 */
886 clear_rdrand_cpuid_bit(c);
887}
888
889static void init_amd_zn(struct cpuinfo_x86 *c)
890{
891 set_cpu_cap(c, X86_FEATURE_ZEN);
892
893#ifdef CONFIG_NUMA
894 node_reclaim_distance = 32;
895#endif
896
897 /*
898 * Fix erratum 1076: CPB feature bit not being set in CPUID.
899 * Always set it, except when running under a hypervisor.
900 */
901 if (!cpu_has(c, X86_FEATURE_HYPERVISOR) && !cpu_has(c, X86_FEATURE_CPB))
902 set_cpu_cap(c, X86_FEATURE_CPB);
903}
904
905static void init_amd(struct cpuinfo_x86 *c)
906{
907 early_init_amd(c);
908
909 /*
910 * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
911 * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
912 */
913 clear_cpu_cap(c, 0*32+31);
914
915 if (c->x86 >= 0x10)
916 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
917
918 /* get apicid instead of initial apic id from cpuid */
919 c->apicid = hard_smp_processor_id();
920
921 /* K6s reports MCEs but don't actually have all the MSRs */
922 if (c->x86 < 6)
923 clear_cpu_cap(c, X86_FEATURE_MCE);
924
925 switch (c->x86) {
926 case 4: init_amd_k5(c); break;
927 case 5: init_amd_k6(c); break;
928 case 6: init_amd_k7(c); break;
929 case 0xf: init_amd_k8(c); break;
930 case 0x10: init_amd_gh(c); break;
931 case 0x12: init_amd_ln(c); break;
932 case 0x15: init_amd_bd(c); break;
933 case 0x16: init_amd_jg(c); break;
934 case 0x17: init_amd_zn(c); break;
935 }
936
937 /*
938 * Enable workaround for FXSAVE leak on CPUs
939 * without a XSaveErPtr feature
940 */
941 if ((c->x86 >= 6) && (!cpu_has(c, X86_FEATURE_XSAVEERPTR)))
942 set_cpu_bug(c, X86_BUG_FXSAVE_LEAK);
943
944 cpu_detect_cache_sizes(c);
945
946 amd_detect_cmp(c);
947 amd_get_topology(c);
948 srat_detect_node(c);
949
950 init_amd_cacheinfo(c);
951
952 if (cpu_has(c, X86_FEATURE_XMM2)) {
953 /*
954 * Use LFENCE for execution serialization. On families which
955 * don't have that MSR, LFENCE is already serializing.
956 * msr_set_bit() uses the safe accessors, too, even if the MSR
957 * is not present.
958 */
959 msr_set_bit(MSR_F10H_DECFG,
960 MSR_F10H_DECFG_LFENCE_SERIALIZE_BIT);
961
962 /* A serializing LFENCE stops RDTSC speculation */
963 set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
964 }
965
966 /*
967 * Family 0x12 and above processors have APIC timer
968 * running in deep C states.
969 */
970 if (c->x86 > 0x11)
971 set_cpu_cap(c, X86_FEATURE_ARAT);
972
973 /* 3DNow or LM implies PREFETCHW */
974 if (!cpu_has(c, X86_FEATURE_3DNOWPREFETCH))
975 if (cpu_has(c, X86_FEATURE_3DNOW) || cpu_has(c, X86_FEATURE_LM))
976 set_cpu_cap(c, X86_FEATURE_3DNOWPREFETCH);
977
978 /* AMD CPUs don't reset SS attributes on SYSRET, Xen does. */
979 if (!cpu_has(c, X86_FEATURE_XENPV))
980 set_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS);
981}
982
983#ifdef CONFIG_X86_32
984static unsigned int amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
985{
986 /* AMD errata T13 (order #21922) */
987 if (c->x86 == 6) {
988 /* Duron Rev A0 */
989 if (c->x86_model == 3 && c->x86_stepping == 0)
990 size = 64;
991 /* Tbird rev A1/A2 */
992 if (c->x86_model == 4 &&
993 (c->x86_stepping == 0 || c->x86_stepping == 1))
994 size = 256;
995 }
996 return size;
997}
998#endif
999
1000static void cpu_detect_tlb_amd(struct cpuinfo_x86 *c)
1001{
1002 u32 ebx, eax, ecx, edx;
1003 u16 mask = 0xfff;
1004
1005 if (c->x86 < 0xf)
1006 return;
1007
1008 if (c->extended_cpuid_level < 0x80000006)
1009 return;
1010
1011 cpuid(0x80000006, &eax, &ebx, &ecx, &edx);
1012
1013 tlb_lld_4k[ENTRIES] = (ebx >> 16) & mask;
1014 tlb_lli_4k[ENTRIES] = ebx & mask;
1015
1016 /*
1017 * K8 doesn't have 2M/4M entries in the L2 TLB so read out the L1 TLB
1018 * characteristics from the CPUID function 0x80000005 instead.
1019 */
1020 if (c->x86 == 0xf) {
1021 cpuid(0x80000005, &eax, &ebx, &ecx, &edx);
1022 mask = 0xff;
1023 }
1024
1025 /* Handle DTLB 2M and 4M sizes, fall back to L1 if L2 is disabled */
1026 if (!((eax >> 16) & mask))
1027 tlb_lld_2m[ENTRIES] = (cpuid_eax(0x80000005) >> 16) & 0xff;
1028 else
1029 tlb_lld_2m[ENTRIES] = (eax >> 16) & mask;
1030
1031 /* a 4M entry uses two 2M entries */
1032 tlb_lld_4m[ENTRIES] = tlb_lld_2m[ENTRIES] >> 1;
1033
1034 /* Handle ITLB 2M and 4M sizes, fall back to L1 if L2 is disabled */
1035 if (!(eax & mask)) {
1036 /* Erratum 658 */
1037 if (c->x86 == 0x15 && c->x86_model <= 0x1f) {
1038 tlb_lli_2m[ENTRIES] = 1024;
1039 } else {
1040 cpuid(0x80000005, &eax, &ebx, &ecx, &edx);
1041 tlb_lli_2m[ENTRIES] = eax & 0xff;
1042 }
1043 } else
1044 tlb_lli_2m[ENTRIES] = eax & mask;
1045
1046 tlb_lli_4m[ENTRIES] = tlb_lli_2m[ENTRIES] >> 1;
1047}
1048
1049static const struct cpu_dev amd_cpu_dev = {
1050 .c_vendor = "AMD",
1051 .c_ident = { "AuthenticAMD" },
1052#ifdef CONFIG_X86_32
1053 .legacy_models = {
1054 { .family = 4, .model_names =
1055 {
1056 [3] = "486 DX/2",
1057 [7] = "486 DX/2-WB",
1058 [8] = "486 DX/4",
1059 [9] = "486 DX/4-WB",
1060 [14] = "Am5x86-WT",
1061 [15] = "Am5x86-WB"
1062 }
1063 },
1064 },
1065 .legacy_cache_size = amd_size_cache,
1066#endif
1067 .c_early_init = early_init_amd,
1068 .c_detect_tlb = cpu_detect_tlb_amd,
1069 .c_bsp_init = bsp_init_amd,
1070 .c_init = init_amd,
1071 .c_x86_vendor = X86_VENDOR_AMD,
1072};
1073
1074cpu_dev_register(amd_cpu_dev);
1075
1076/*
1077 * AMD errata checking
1078 *
1079 * Errata are defined as arrays of ints using the AMD_LEGACY_ERRATUM() or
1080 * AMD_OSVW_ERRATUM() macros. The latter is intended for newer errata that
1081 * have an OSVW id assigned, which it takes as first argument. Both take a
1082 * variable number of family-specific model-stepping ranges created by
1083 * AMD_MODEL_RANGE().
1084 *
1085 * Example:
1086 *
1087 * const int amd_erratum_319[] =
1088 * AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0x4, 0x2),
1089 * AMD_MODEL_RANGE(0x10, 0x8, 0x0, 0x8, 0x0),
1090 * AMD_MODEL_RANGE(0x10, 0x9, 0x0, 0x9, 0x0));
1091 */
1092
1093#define AMD_LEGACY_ERRATUM(...) { -1, __VA_ARGS__, 0 }
1094#define AMD_OSVW_ERRATUM(osvw_id, ...) { osvw_id, __VA_ARGS__, 0 }
1095#define AMD_MODEL_RANGE(f, m_start, s_start, m_end, s_end) \
1096 ((f << 24) | (m_start << 16) | (s_start << 12) | (m_end << 4) | (s_end))
1097#define AMD_MODEL_RANGE_FAMILY(range) (((range) >> 24) & 0xff)
1098#define AMD_MODEL_RANGE_START(range) (((range) >> 12) & 0xfff)
1099#define AMD_MODEL_RANGE_END(range) ((range) & 0xfff)
1100
1101static const int amd_erratum_400[] =
1102 AMD_OSVW_ERRATUM(1, AMD_MODEL_RANGE(0xf, 0x41, 0x2, 0xff, 0xf),
1103 AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0xff, 0xf));
1104
1105static const int amd_erratum_383[] =
1106 AMD_OSVW_ERRATUM(3, AMD_MODEL_RANGE(0x10, 0, 0, 0xff, 0xf));
1107
1108
1109static bool cpu_has_amd_erratum(struct cpuinfo_x86 *cpu, const int *erratum)
1110{
1111 int osvw_id = *erratum++;
1112 u32 range;
1113 u32 ms;
1114
1115 if (osvw_id >= 0 && osvw_id < 65536 &&
1116 cpu_has(cpu, X86_FEATURE_OSVW)) {
1117 u64 osvw_len;
1118
1119 rdmsrl(MSR_AMD64_OSVW_ID_LENGTH, osvw_len);
1120 if (osvw_id < osvw_len) {
1121 u64 osvw_bits;
1122
1123 rdmsrl(MSR_AMD64_OSVW_STATUS + (osvw_id >> 6),
1124 osvw_bits);
1125 return osvw_bits & (1ULL << (osvw_id & 0x3f));
1126 }
1127 }
1128
1129 /* OSVW unavailable or ID unknown, match family-model-stepping range */
1130 ms = (cpu->x86_model << 4) | cpu->x86_stepping;
1131 while ((range = *erratum++))
1132 if ((cpu->x86 == AMD_MODEL_RANGE_FAMILY(range)) &&
1133 (ms >= AMD_MODEL_RANGE_START(range)) &&
1134 (ms <= AMD_MODEL_RANGE_END(range)))
1135 return true;
1136
1137 return false;
1138}
1139
1140void set_dr_addr_mask(unsigned long mask, int dr)
1141{
1142 if (!boot_cpu_has(X86_FEATURE_BPEXT))
1143 return;
1144
1145 switch (dr) {
1146 case 0:
1147 wrmsr(MSR_F16H_DR0_ADDR_MASK, mask, 0);
1148 break;
1149 case 1:
1150 case 2:
1151 case 3:
1152 wrmsr(MSR_F16H_DR1_ADDR_MASK - 1 + dr, mask, 0);
1153 break;
1154 default:
1155 break;
1156 }
1157}
1// SPDX-License-Identifier: GPL-2.0-only
2#include <linux/export.h>
3#include <linux/bitops.h>
4#include <linux/elf.h>
5#include <linux/mm.h>
6
7#include <linux/io.h>
8#include <linux/sched.h>
9#include <linux/sched/clock.h>
10#include <linux/random.h>
11#include <linux/topology.h>
12#include <asm/processor.h>
13#include <asm/apic.h>
14#include <asm/cacheinfo.h>
15#include <asm/cpu.h>
16#include <asm/cpu_device_id.h>
17#include <asm/spec-ctrl.h>
18#include <asm/smp.h>
19#include <asm/numa.h>
20#include <asm/pci-direct.h>
21#include <asm/delay.h>
22#include <asm/debugreg.h>
23#include <asm/resctrl.h>
24#include <asm/sev.h>
25
26#ifdef CONFIG_X86_64
27# include <asm/mmconfig.h>
28#endif
29
30#include "cpu.h"
31
32static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
33{
34 u32 gprs[8] = { 0 };
35 int err;
36
37 WARN_ONCE((boot_cpu_data.x86 != 0xf),
38 "%s should only be used on K8!\n", __func__);
39
40 gprs[1] = msr;
41 gprs[7] = 0x9c5a203a;
42
43 err = rdmsr_safe_regs(gprs);
44
45 *p = gprs[0] | ((u64)gprs[2] << 32);
46
47 return err;
48}
49
50static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
51{
52 u32 gprs[8] = { 0 };
53
54 WARN_ONCE((boot_cpu_data.x86 != 0xf),
55 "%s should only be used on K8!\n", __func__);
56
57 gprs[0] = (u32)val;
58 gprs[1] = msr;
59 gprs[2] = val >> 32;
60 gprs[7] = 0x9c5a203a;
61
62 return wrmsr_safe_regs(gprs);
63}
64
65/*
66 * B step AMD K6 before B 9730xxxx have hardware bugs that can cause
67 * misexecution of code under Linux. Owners of such processors should
68 * contact AMD for precise details and a CPU swap.
69 *
70 * See http://www.multimania.com/poulot/k6bug.html
71 * and section 2.6.2 of "AMD-K6 Processor Revision Guide - Model 6"
72 * (Publication # 21266 Issue Date: August 1998)
73 *
74 * The following test is erm.. interesting. AMD neglected to up
75 * the chip setting when fixing the bug but they also tweaked some
76 * performance at the same time..
77 */
78
79#ifdef CONFIG_X86_32
80extern __visible void vide(void);
81__asm__(".text\n"
82 ".globl vide\n"
83 ".type vide, @function\n"
84 ".align 4\n"
85 "vide: ret\n");
86#endif
87
88static void init_amd_k5(struct cpuinfo_x86 *c)
89{
90#ifdef CONFIG_X86_32
91/*
92 * General Systems BIOSen alias the cpu frequency registers
93 * of the Elan at 0x000df000. Unfortunately, one of the Linux
94 * drivers subsequently pokes it, and changes the CPU speed.
95 * Workaround : Remove the unneeded alias.
96 */
97#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */
98#define CBAR_ENB (0x80000000)
99#define CBAR_KEY (0X000000CB)
100 if (c->x86_model == 9 || c->x86_model == 10) {
101 if (inl(CBAR) & CBAR_ENB)
102 outl(0 | CBAR_KEY, CBAR);
103 }
104#endif
105}
106
107static void init_amd_k6(struct cpuinfo_x86 *c)
108{
109#ifdef CONFIG_X86_32
110 u32 l, h;
111 int mbytes = get_num_physpages() >> (20-PAGE_SHIFT);
112
113 if (c->x86_model < 6) {
114 /* Based on AMD doc 20734R - June 2000 */
115 if (c->x86_model == 0) {
116 clear_cpu_cap(c, X86_FEATURE_APIC);
117 set_cpu_cap(c, X86_FEATURE_PGE);
118 }
119 return;
120 }
121
122 if (c->x86_model == 6 && c->x86_stepping == 1) {
123 const int K6_BUG_LOOP = 1000000;
124 int n;
125 void (*f_vide)(void);
126 u64 d, d2;
127
128 pr_info("AMD K6 stepping B detected - ");
129
130 /*
131 * It looks like AMD fixed the 2.6.2 bug and improved indirect
132 * calls at the same time.
133 */
134
135 n = K6_BUG_LOOP;
136 f_vide = vide;
137 OPTIMIZER_HIDE_VAR(f_vide);
138 d = rdtsc();
139 while (n--)
140 f_vide();
141 d2 = rdtsc();
142 d = d2-d;
143
144 if (d > 20*K6_BUG_LOOP)
145 pr_cont("system stability may be impaired when more than 32 MB are used.\n");
146 else
147 pr_cont("probably OK (after B9730xxxx).\n");
148 }
149
150 /* K6 with old style WHCR */
151 if (c->x86_model < 8 ||
152 (c->x86_model == 8 && c->x86_stepping < 8)) {
153 /* We can only write allocate on the low 508Mb */
154 if (mbytes > 508)
155 mbytes = 508;
156
157 rdmsr(MSR_K6_WHCR, l, h);
158 if ((l&0x0000FFFF) == 0) {
159 unsigned long flags;
160 l = (1<<0)|((mbytes/4)<<1);
161 local_irq_save(flags);
162 wbinvd();
163 wrmsr(MSR_K6_WHCR, l, h);
164 local_irq_restore(flags);
165 pr_info("Enabling old style K6 write allocation for %d Mb\n",
166 mbytes);
167 }
168 return;
169 }
170
171 if ((c->x86_model == 8 && c->x86_stepping > 7) ||
172 c->x86_model == 9 || c->x86_model == 13) {
173 /* The more serious chips .. */
174
175 if (mbytes > 4092)
176 mbytes = 4092;
177
178 rdmsr(MSR_K6_WHCR, l, h);
179 if ((l&0xFFFF0000) == 0) {
180 unsigned long flags;
181 l = ((mbytes>>2)<<22)|(1<<16);
182 local_irq_save(flags);
183 wbinvd();
184 wrmsr(MSR_K6_WHCR, l, h);
185 local_irq_restore(flags);
186 pr_info("Enabling new style K6 write allocation for %d Mb\n",
187 mbytes);
188 }
189
190 return;
191 }
192
193 if (c->x86_model == 10) {
194 /* AMD Geode LX is model 10 */
195 /* placeholder for any needed mods */
196 return;
197 }
198#endif
199}
200
201static void init_amd_k7(struct cpuinfo_x86 *c)
202{
203#ifdef CONFIG_X86_32
204 u32 l, h;
205
206 /*
207 * Bit 15 of Athlon specific MSR 15, needs to be 0
208 * to enable SSE on Palomino/Morgan/Barton CPU's.
209 * If the BIOS didn't enable it already, enable it here.
210 */
211 if (c->x86_model >= 6 && c->x86_model <= 10) {
212 if (!cpu_has(c, X86_FEATURE_XMM)) {
213 pr_info("Enabling disabled K7/SSE Support.\n");
214 msr_clear_bit(MSR_K7_HWCR, 15);
215 set_cpu_cap(c, X86_FEATURE_XMM);
216 }
217 }
218
219 /*
220 * It's been determined by AMD that Athlons since model 8 stepping 1
221 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
222 * As per AMD technical note 27212 0.2
223 */
224 if ((c->x86_model == 8 && c->x86_stepping >= 1) || (c->x86_model > 8)) {
225 rdmsr(MSR_K7_CLK_CTL, l, h);
226 if ((l & 0xfff00000) != 0x20000000) {
227 pr_info("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n",
228 l, ((l & 0x000fffff)|0x20000000));
229 wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
230 }
231 }
232
233 /* calling is from identify_secondary_cpu() ? */
234 if (!c->cpu_index)
235 return;
236
237 /*
238 * Certain Athlons might work (for various values of 'work') in SMP
239 * but they are not certified as MP capable.
240 */
241 /* Athlon 660/661 is valid. */
242 if ((c->x86_model == 6) && ((c->x86_stepping == 0) ||
243 (c->x86_stepping == 1)))
244 return;
245
246 /* Duron 670 is valid */
247 if ((c->x86_model == 7) && (c->x86_stepping == 0))
248 return;
249
250 /*
251 * Athlon 662, Duron 671, and Athlon >model 7 have capability
252 * bit. It's worth noting that the A5 stepping (662) of some
253 * Athlon XP's have the MP bit set.
254 * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for
255 * more.
256 */
257 if (((c->x86_model == 6) && (c->x86_stepping >= 2)) ||
258 ((c->x86_model == 7) && (c->x86_stepping >= 1)) ||
259 (c->x86_model > 7))
260 if (cpu_has(c, X86_FEATURE_MP))
261 return;
262
263 /* If we get here, not a certified SMP capable AMD system. */
264
265 /*
266 * Don't taint if we are running SMP kernel on a single non-MP
267 * approved Athlon
268 */
269 WARN_ONCE(1, "WARNING: This combination of AMD"
270 " processors is not suitable for SMP.\n");
271 add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_NOW_UNRELIABLE);
272#endif
273}
274
275#ifdef CONFIG_NUMA
276/*
277 * To workaround broken NUMA config. Read the comment in
278 * srat_detect_node().
279 */
280static int nearby_node(int apicid)
281{
282 int i, node;
283
284 for (i = apicid - 1; i >= 0; i--) {
285 node = __apicid_to_node[i];
286 if (node != NUMA_NO_NODE && node_online(node))
287 return node;
288 }
289 for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
290 node = __apicid_to_node[i];
291 if (node != NUMA_NO_NODE && node_online(node))
292 return node;
293 }
294 return first_node(node_online_map); /* Shouldn't happen */
295}
296#endif
297
298static void srat_detect_node(struct cpuinfo_x86 *c)
299{
300#ifdef CONFIG_NUMA
301 int cpu = smp_processor_id();
302 int node;
303 unsigned apicid = c->topo.apicid;
304
305 node = numa_cpu_node(cpu);
306 if (node == NUMA_NO_NODE)
307 node = per_cpu_llc_id(cpu);
308
309 /*
310 * On multi-fabric platform (e.g. Numascale NumaChip) a
311 * platform-specific handler needs to be called to fixup some
312 * IDs of the CPU.
313 */
314 if (x86_cpuinit.fixup_cpu_id)
315 x86_cpuinit.fixup_cpu_id(c, node);
316
317 if (!node_online(node)) {
318 /*
319 * Two possibilities here:
320 *
321 * - The CPU is missing memory and no node was created. In
322 * that case try picking one from a nearby CPU.
323 *
324 * - The APIC IDs differ from the HyperTransport node IDs
325 * which the K8 northbridge parsing fills in. Assume
326 * they are all increased by a constant offset, but in
327 * the same order as the HT nodeids. If that doesn't
328 * result in a usable node fall back to the path for the
329 * previous case.
330 *
331 * This workaround operates directly on the mapping between
332 * APIC ID and NUMA node, assuming certain relationship
333 * between APIC ID, HT node ID and NUMA topology. As going
334 * through CPU mapping may alter the outcome, directly
335 * access __apicid_to_node[].
336 */
337 int ht_nodeid = c->topo.initial_apicid;
338
339 if (__apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
340 node = __apicid_to_node[ht_nodeid];
341 /* Pick a nearby node */
342 if (!node_online(node))
343 node = nearby_node(apicid);
344 }
345 numa_set_node(cpu, node);
346#endif
347}
348
349static void bsp_determine_snp(struct cpuinfo_x86 *c)
350{
351#ifdef CONFIG_ARCH_HAS_CC_PLATFORM
352 cc_vendor = CC_VENDOR_AMD;
353
354 if (cpu_has(c, X86_FEATURE_SEV_SNP)) {
355 /*
356 * RMP table entry format is not architectural and is defined by the
357 * per-processor PPR. Restrict SNP support on the known CPU models
358 * for which the RMP table entry format is currently defined for.
359 */
360 if (!cpu_has(c, X86_FEATURE_HYPERVISOR) &&
361 c->x86 >= 0x19 && snp_probe_rmptable_info()) {
362 cc_platform_set(CC_ATTR_HOST_SEV_SNP);
363 } else {
364 setup_clear_cpu_cap(X86_FEATURE_SEV_SNP);
365 cc_platform_clear(CC_ATTR_HOST_SEV_SNP);
366 }
367 }
368#endif
369}
370
371static void bsp_init_amd(struct cpuinfo_x86 *c)
372{
373 if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
374
375 if (c->x86 > 0x10 ||
376 (c->x86 == 0x10 && c->x86_model >= 0x2)) {
377 u64 val;
378
379 rdmsrl(MSR_K7_HWCR, val);
380 if (!(val & BIT(24)))
381 pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n");
382 }
383 }
384
385 if (c->x86 == 0x15) {
386 unsigned long upperbit;
387 u32 cpuid, assoc;
388
389 cpuid = cpuid_edx(0x80000005);
390 assoc = cpuid >> 16 & 0xff;
391 upperbit = ((cpuid >> 24) << 10) / assoc;
392
393 va_align.mask = (upperbit - 1) & PAGE_MASK;
394 va_align.flags = ALIGN_VA_32 | ALIGN_VA_64;
395
396 /* A random value per boot for bit slice [12:upper_bit) */
397 va_align.bits = get_random_u32() & va_align.mask;
398 }
399
400 if (cpu_has(c, X86_FEATURE_MWAITX))
401 use_mwaitx_delay();
402
403 if (!boot_cpu_has(X86_FEATURE_AMD_SSBD) &&
404 !boot_cpu_has(X86_FEATURE_VIRT_SSBD) &&
405 c->x86 >= 0x15 && c->x86 <= 0x17) {
406 unsigned int bit;
407
408 switch (c->x86) {
409 case 0x15: bit = 54; break;
410 case 0x16: bit = 33; break;
411 case 0x17: bit = 10; break;
412 default: return;
413 }
414 /*
415 * Try to cache the base value so further operations can
416 * avoid RMW. If that faults, do not enable SSBD.
417 */
418 if (!rdmsrl_safe(MSR_AMD64_LS_CFG, &x86_amd_ls_cfg_base)) {
419 setup_force_cpu_cap(X86_FEATURE_LS_CFG_SSBD);
420 setup_force_cpu_cap(X86_FEATURE_SSBD);
421 x86_amd_ls_cfg_ssbd_mask = 1ULL << bit;
422 }
423 }
424
425 resctrl_cpu_detect(c);
426
427 /* Figure out Zen generations: */
428 switch (c->x86) {
429 case 0x17:
430 switch (c->x86_model) {
431 case 0x00 ... 0x2f:
432 case 0x50 ... 0x5f:
433 setup_force_cpu_cap(X86_FEATURE_ZEN1);
434 break;
435 case 0x30 ... 0x4f:
436 case 0x60 ... 0x7f:
437 case 0x90 ... 0x91:
438 case 0xa0 ... 0xaf:
439 setup_force_cpu_cap(X86_FEATURE_ZEN2);
440 break;
441 default:
442 goto warn;
443 }
444 break;
445
446 case 0x19:
447 switch (c->x86_model) {
448 case 0x00 ... 0x0f:
449 case 0x20 ... 0x5f:
450 setup_force_cpu_cap(X86_FEATURE_ZEN3);
451 break;
452 case 0x10 ... 0x1f:
453 case 0x60 ... 0xaf:
454 setup_force_cpu_cap(X86_FEATURE_ZEN4);
455 break;
456 default:
457 goto warn;
458 }
459 break;
460
461 case 0x1a:
462 switch (c->x86_model) {
463 case 0x00 ... 0x2f:
464 case 0x40 ... 0x4f:
465 case 0x60 ... 0x7f:
466 setup_force_cpu_cap(X86_FEATURE_ZEN5);
467 break;
468 default:
469 goto warn;
470 }
471 break;
472
473 default:
474 break;
475 }
476
477 bsp_determine_snp(c);
478 return;
479
480warn:
481 WARN_ONCE(1, "Family 0x%x, model: 0x%x??\n", c->x86, c->x86_model);
482}
483
484static void early_detect_mem_encrypt(struct cpuinfo_x86 *c)
485{
486 u64 msr;
487
488 /*
489 * BIOS support is required for SME and SEV.
490 * For SME: If BIOS has enabled SME then adjust x86_phys_bits by
491 * the SME physical address space reduction value.
492 * If BIOS has not enabled SME then don't advertise the
493 * SME feature (set in scattered.c).
494 * If the kernel has not enabled SME via any means then
495 * don't advertise the SME feature.
496 * For SEV: If BIOS has not enabled SEV then don't advertise SEV and
497 * any additional functionality based on it.
498 *
499 * In all cases, since support for SME and SEV requires long mode,
500 * don't advertise the feature under CONFIG_X86_32.
501 */
502 if (cpu_has(c, X86_FEATURE_SME) || cpu_has(c, X86_FEATURE_SEV)) {
503 /* Check if memory encryption is enabled */
504 rdmsrl(MSR_AMD64_SYSCFG, msr);
505 if (!(msr & MSR_AMD64_SYSCFG_MEM_ENCRYPT))
506 goto clear_all;
507
508 /*
509 * Always adjust physical address bits. Even though this
510 * will be a value above 32-bits this is still done for
511 * CONFIG_X86_32 so that accurate values are reported.
512 */
513 c->x86_phys_bits -= (cpuid_ebx(0x8000001f) >> 6) & 0x3f;
514
515 if (IS_ENABLED(CONFIG_X86_32))
516 goto clear_all;
517
518 if (!sme_me_mask)
519 setup_clear_cpu_cap(X86_FEATURE_SME);
520
521 rdmsrl(MSR_K7_HWCR, msr);
522 if (!(msr & MSR_K7_HWCR_SMMLOCK))
523 goto clear_sev;
524
525 return;
526
527clear_all:
528 setup_clear_cpu_cap(X86_FEATURE_SME);
529clear_sev:
530 setup_clear_cpu_cap(X86_FEATURE_SEV);
531 setup_clear_cpu_cap(X86_FEATURE_SEV_ES);
532 setup_clear_cpu_cap(X86_FEATURE_SEV_SNP);
533 }
534}
535
536static void early_init_amd(struct cpuinfo_x86 *c)
537{
538 u32 dummy;
539
540 if (c->x86 >= 0xf)
541 set_cpu_cap(c, X86_FEATURE_K8);
542
543 rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy);
544
545 /*
546 * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate
547 * with P/T states and does not stop in deep C-states
548 */
549 if (c->x86_power & (1 << 8)) {
550 set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
551 set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
552 }
553
554 /* Bit 12 of 8000_0007 edx is accumulated power mechanism. */
555 if (c->x86_power & BIT(12))
556 set_cpu_cap(c, X86_FEATURE_ACC_POWER);
557
558 /* Bit 14 indicates the Runtime Average Power Limit interface. */
559 if (c->x86_power & BIT(14))
560 set_cpu_cap(c, X86_FEATURE_RAPL);
561
562#ifdef CONFIG_X86_64
563 set_cpu_cap(c, X86_FEATURE_SYSCALL32);
564#else
565 /* Set MTRR capability flag if appropriate */
566 if (c->x86 == 5)
567 if (c->x86_model == 13 || c->x86_model == 9 ||
568 (c->x86_model == 8 && c->x86_stepping >= 8))
569 set_cpu_cap(c, X86_FEATURE_K6_MTRR);
570#endif
571#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
572 /*
573 * ApicID can always be treated as an 8-bit value for AMD APIC versions
574 * >= 0x10, but even old K8s came out of reset with version 0x10. So, we
575 * can safely set X86_FEATURE_EXTD_APICID unconditionally for families
576 * after 16h.
577 */
578 if (boot_cpu_has(X86_FEATURE_APIC)) {
579 if (c->x86 > 0x16)
580 set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
581 else if (c->x86 >= 0xf) {
582 /* check CPU config space for extended APIC ID */
583 unsigned int val;
584
585 val = read_pci_config(0, 24, 0, 0x68);
586 if ((val >> 17 & 0x3) == 0x3)
587 set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
588 }
589 }
590#endif
591
592 /*
593 * This is only needed to tell the kernel whether to use VMCALL
594 * and VMMCALL. VMMCALL is never executed except under virt, so
595 * we can set it unconditionally.
596 */
597 set_cpu_cap(c, X86_FEATURE_VMMCALL);
598
599 /* F16h erratum 793, CVE-2013-6885 */
600 if (c->x86 == 0x16 && c->x86_model <= 0xf)
601 msr_set_bit(MSR_AMD64_LS_CFG, 15);
602
603 early_detect_mem_encrypt(c);
604
605 if (!cpu_has(c, X86_FEATURE_HYPERVISOR) && !cpu_has(c, X86_FEATURE_IBPB_BRTYPE)) {
606 if (c->x86 == 0x17 && boot_cpu_has(X86_FEATURE_AMD_IBPB))
607 setup_force_cpu_cap(X86_FEATURE_IBPB_BRTYPE);
608 else if (c->x86 >= 0x19 && !wrmsrl_safe(MSR_IA32_PRED_CMD, PRED_CMD_SBPB)) {
609 setup_force_cpu_cap(X86_FEATURE_IBPB_BRTYPE);
610 setup_force_cpu_cap(X86_FEATURE_SBPB);
611 }
612 }
613}
614
615static void init_amd_k8(struct cpuinfo_x86 *c)
616{
617 u32 level;
618 u64 value;
619
620 /* On C+ stepping K8 rep microcode works well for copy/memset */
621 level = cpuid_eax(1);
622 if ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
623 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
624
625 /*
626 * Some BIOSes incorrectly force this feature, but only K8 revision D
627 * (model = 0x14) and later actually support it.
628 * (AMD Erratum #110, docId: 25759).
629 */
630 if (c->x86_model < 0x14 && cpu_has(c, X86_FEATURE_LAHF_LM)) {
631 clear_cpu_cap(c, X86_FEATURE_LAHF_LM);
632 if (!rdmsrl_amd_safe(0xc001100d, &value)) {
633 value &= ~BIT_64(32);
634 wrmsrl_amd_safe(0xc001100d, value);
635 }
636 }
637
638 if (!c->x86_model_id[0])
639 strcpy(c->x86_model_id, "Hammer");
640
641#ifdef CONFIG_SMP
642 /*
643 * Disable TLB flush filter by setting HWCR.FFDIS on K8
644 * bit 6 of msr C001_0015
645 *
646 * Errata 63 for SH-B3 steppings
647 * Errata 122 for all steppings (F+ have it disabled by default)
648 */
649 msr_set_bit(MSR_K7_HWCR, 6);
650#endif
651 set_cpu_bug(c, X86_BUG_SWAPGS_FENCE);
652
653 /*
654 * Check models and steppings affected by erratum 400. This is
655 * used to select the proper idle routine and to enable the
656 * check whether the machine is affected in arch_post_acpi_subsys_init()
657 * which sets the X86_BUG_AMD_APIC_C1E bug depending on the MSR check.
658 */
659 if (c->x86_model > 0x41 ||
660 (c->x86_model == 0x41 && c->x86_stepping >= 0x2))
661 setup_force_cpu_bug(X86_BUG_AMD_E400);
662}
663
664static void init_amd_gh(struct cpuinfo_x86 *c)
665{
666#ifdef CONFIG_MMCONF_FAM10H
667 /* do this for boot cpu */
668 if (c == &boot_cpu_data)
669 check_enable_amd_mmconf_dmi();
670
671 fam10h_check_enable_mmcfg();
672#endif
673
674 /*
675 * Disable GART TLB Walk Errors on Fam10h. We do this here because this
676 * is always needed when GART is enabled, even in a kernel which has no
677 * MCE support built in. BIOS should disable GartTlbWlk Errors already.
678 * If it doesn't, we do it here as suggested by the BKDG.
679 *
680 * Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33012
681 */
682 msr_set_bit(MSR_AMD64_MCx_MASK(4), 10);
683
684 /*
685 * On family 10h BIOS may not have properly enabled WC+ support, causing
686 * it to be converted to CD memtype. This may result in performance
687 * degradation for certain nested-paging guests. Prevent this conversion
688 * by clearing bit 24 in MSR_AMD64_BU_CFG2.
689 *
690 * NOTE: we want to use the _safe accessors so as not to #GP kvm
691 * guests on older kvm hosts.
692 */
693 msr_clear_bit(MSR_AMD64_BU_CFG2, 24);
694
695 set_cpu_bug(c, X86_BUG_AMD_TLB_MMATCH);
696
697 /*
698 * Check models and steppings affected by erratum 400. This is
699 * used to select the proper idle routine and to enable the
700 * check whether the machine is affected in arch_post_acpi_subsys_init()
701 * which sets the X86_BUG_AMD_APIC_C1E bug depending on the MSR check.
702 */
703 if (c->x86_model > 0x2 ||
704 (c->x86_model == 0x2 && c->x86_stepping >= 0x1))
705 setup_force_cpu_bug(X86_BUG_AMD_E400);
706}
707
708static void init_amd_ln(struct cpuinfo_x86 *c)
709{
710 /*
711 * Apply erratum 665 fix unconditionally so machines without a BIOS
712 * fix work.
713 */
714 msr_set_bit(MSR_AMD64_DE_CFG, 31);
715}
716
717static bool rdrand_force;
718
719static int __init rdrand_cmdline(char *str)
720{
721 if (!str)
722 return -EINVAL;
723
724 if (!strcmp(str, "force"))
725 rdrand_force = true;
726 else
727 return -EINVAL;
728
729 return 0;
730}
731early_param("rdrand", rdrand_cmdline);
732
733static void clear_rdrand_cpuid_bit(struct cpuinfo_x86 *c)
734{
735 /*
736 * Saving of the MSR used to hide the RDRAND support during
737 * suspend/resume is done by arch/x86/power/cpu.c, which is
738 * dependent on CONFIG_PM_SLEEP.
739 */
740 if (!IS_ENABLED(CONFIG_PM_SLEEP))
741 return;
742
743 /*
744 * The self-test can clear X86_FEATURE_RDRAND, so check for
745 * RDRAND support using the CPUID function directly.
746 */
747 if (!(cpuid_ecx(1) & BIT(30)) || rdrand_force)
748 return;
749
750 msr_clear_bit(MSR_AMD64_CPUID_FN_1, 62);
751
752 /*
753 * Verify that the CPUID change has occurred in case the kernel is
754 * running virtualized and the hypervisor doesn't support the MSR.
755 */
756 if (cpuid_ecx(1) & BIT(30)) {
757 pr_info_once("BIOS may not properly restore RDRAND after suspend, but hypervisor does not support hiding RDRAND via CPUID.\n");
758 return;
759 }
760
761 clear_cpu_cap(c, X86_FEATURE_RDRAND);
762 pr_info_once("BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.\n");
763}
764
765static void init_amd_jg(struct cpuinfo_x86 *c)
766{
767 /*
768 * Some BIOS implementations do not restore proper RDRAND support
769 * across suspend and resume. Check on whether to hide the RDRAND
770 * instruction support via CPUID.
771 */
772 clear_rdrand_cpuid_bit(c);
773}
774
775static void init_amd_bd(struct cpuinfo_x86 *c)
776{
777 u64 value;
778
779 /*
780 * The way access filter has a performance penalty on some workloads.
781 * Disable it on the affected CPUs.
782 */
783 if ((c->x86_model >= 0x02) && (c->x86_model < 0x20)) {
784 if (!rdmsrl_safe(MSR_F15H_IC_CFG, &value) && !(value & 0x1E)) {
785 value |= 0x1E;
786 wrmsrl_safe(MSR_F15H_IC_CFG, value);
787 }
788 }
789
790 /*
791 * Some BIOS implementations do not restore proper RDRAND support
792 * across suspend and resume. Check on whether to hide the RDRAND
793 * instruction support via CPUID.
794 */
795 clear_rdrand_cpuid_bit(c);
796}
797
798static const struct x86_cpu_desc erratum_1386_microcode[] = {
799 AMD_CPU_DESC(0x17, 0x1, 0x2, 0x0800126e),
800 AMD_CPU_DESC(0x17, 0x31, 0x0, 0x08301052),
801 {},
802};
803
804static void fix_erratum_1386(struct cpuinfo_x86 *c)
805{
806 /*
807 * Work around Erratum 1386. The XSAVES instruction malfunctions in
808 * certain circumstances on Zen1/2 uarch, and not all parts have had
809 * updated microcode at the time of writing (March 2023).
810 *
811 * Affected parts all have no supervisor XSAVE states, meaning that
812 * the XSAVEC instruction (which works fine) is equivalent.
813 *
814 * Clear the feature flag only on microcode revisions which
815 * don't have the fix.
816 */
817 if (x86_cpu_has_min_microcode_rev(erratum_1386_microcode))
818 return;
819
820 clear_cpu_cap(c, X86_FEATURE_XSAVES);
821}
822
823void init_spectral_chicken(struct cpuinfo_x86 *c)
824{
825#ifdef CONFIG_MITIGATION_UNRET_ENTRY
826 u64 value;
827
828 /*
829 * On Zen2 we offer this chicken (bit) on the altar of Speculation.
830 *
831 * This suppresses speculation from the middle of a basic block, i.e. it
832 * suppresses non-branch predictions.
833 */
834 if (!cpu_has(c, X86_FEATURE_HYPERVISOR)) {
835 if (!rdmsrl_safe(MSR_ZEN2_SPECTRAL_CHICKEN, &value)) {
836 value |= MSR_ZEN2_SPECTRAL_CHICKEN_BIT;
837 wrmsrl_safe(MSR_ZEN2_SPECTRAL_CHICKEN, value);
838 }
839 }
840#endif
841}
842
843static void init_amd_zen_common(void)
844{
845 setup_force_cpu_cap(X86_FEATURE_ZEN);
846#ifdef CONFIG_NUMA
847 node_reclaim_distance = 32;
848#endif
849}
850
851static void init_amd_zen1(struct cpuinfo_x86 *c)
852{
853 fix_erratum_1386(c);
854
855 /* Fix up CPUID bits, but only if not virtualised. */
856 if (!cpu_has(c, X86_FEATURE_HYPERVISOR)) {
857
858 /* Erratum 1076: CPB feature bit not being set in CPUID. */
859 if (!cpu_has(c, X86_FEATURE_CPB))
860 set_cpu_cap(c, X86_FEATURE_CPB);
861 }
862
863 pr_notice_once("AMD Zen1 DIV0 bug detected. Disable SMT for full protection.\n");
864 setup_force_cpu_bug(X86_BUG_DIV0);
865}
866
867static bool cpu_has_zenbleed_microcode(void)
868{
869 u32 good_rev = 0;
870
871 switch (boot_cpu_data.x86_model) {
872 case 0x30 ... 0x3f: good_rev = 0x0830107b; break;
873 case 0x60 ... 0x67: good_rev = 0x0860010c; break;
874 case 0x68 ... 0x6f: good_rev = 0x08608107; break;
875 case 0x70 ... 0x7f: good_rev = 0x08701033; break;
876 case 0xa0 ... 0xaf: good_rev = 0x08a00009; break;
877
878 default:
879 return false;
880 }
881
882 if (boot_cpu_data.microcode < good_rev)
883 return false;
884
885 return true;
886}
887
888static void zen2_zenbleed_check(struct cpuinfo_x86 *c)
889{
890 if (cpu_has(c, X86_FEATURE_HYPERVISOR))
891 return;
892
893 if (!cpu_has(c, X86_FEATURE_AVX))
894 return;
895
896 if (!cpu_has_zenbleed_microcode()) {
897 pr_notice_once("Zenbleed: please update your microcode for the most optimal fix\n");
898 msr_set_bit(MSR_AMD64_DE_CFG, MSR_AMD64_DE_CFG_ZEN2_FP_BACKUP_FIX_BIT);
899 } else {
900 msr_clear_bit(MSR_AMD64_DE_CFG, MSR_AMD64_DE_CFG_ZEN2_FP_BACKUP_FIX_BIT);
901 }
902}
903
904static void init_amd_zen2(struct cpuinfo_x86 *c)
905{
906 init_spectral_chicken(c);
907 fix_erratum_1386(c);
908 zen2_zenbleed_check(c);
909}
910
911static void init_amd_zen3(struct cpuinfo_x86 *c)
912{
913 if (!cpu_has(c, X86_FEATURE_HYPERVISOR)) {
914 /*
915 * Zen3 (Fam19 model < 0x10) parts are not susceptible to
916 * Branch Type Confusion, but predate the allocation of the
917 * BTC_NO bit.
918 */
919 if (!cpu_has(c, X86_FEATURE_BTC_NO))
920 set_cpu_cap(c, X86_FEATURE_BTC_NO);
921 }
922}
923
924static void init_amd_zen4(struct cpuinfo_x86 *c)
925{
926 if (!cpu_has(c, X86_FEATURE_HYPERVISOR))
927 msr_set_bit(MSR_ZEN4_BP_CFG, MSR_ZEN4_BP_CFG_SHARED_BTB_FIX_BIT);
928
929 /*
930 * These Zen4 SoCs advertise support for virtualized VMLOAD/VMSAVE
931 * in some BIOS versions but they can lead to random host reboots.
932 */
933 switch (c->x86_model) {
934 case 0x18 ... 0x1f:
935 case 0x60 ... 0x7f:
936 clear_cpu_cap(c, X86_FEATURE_V_VMSAVE_VMLOAD);
937 break;
938 }
939}
940
941static void init_amd_zen5(struct cpuinfo_x86 *c)
942{
943}
944
945static void init_amd(struct cpuinfo_x86 *c)
946{
947 u64 vm_cr;
948
949 early_init_amd(c);
950
951 /*
952 * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
953 * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
954 */
955 clear_cpu_cap(c, 0*32+31);
956
957 if (c->x86 >= 0x10)
958 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
959
960 /* AMD FSRM also implies FSRS */
961 if (cpu_has(c, X86_FEATURE_FSRM))
962 set_cpu_cap(c, X86_FEATURE_FSRS);
963
964 /* K6s reports MCEs but don't actually have all the MSRs */
965 if (c->x86 < 6)
966 clear_cpu_cap(c, X86_FEATURE_MCE);
967
968 switch (c->x86) {
969 case 4: init_amd_k5(c); break;
970 case 5: init_amd_k6(c); break;
971 case 6: init_amd_k7(c); break;
972 case 0xf: init_amd_k8(c); break;
973 case 0x10: init_amd_gh(c); break;
974 case 0x12: init_amd_ln(c); break;
975 case 0x15: init_amd_bd(c); break;
976 case 0x16: init_amd_jg(c); break;
977 }
978
979 /*
980 * Save up on some future enablement work and do common Zen
981 * settings.
982 */
983 if (c->x86 >= 0x17)
984 init_amd_zen_common();
985
986 if (boot_cpu_has(X86_FEATURE_ZEN1))
987 init_amd_zen1(c);
988 else if (boot_cpu_has(X86_FEATURE_ZEN2))
989 init_amd_zen2(c);
990 else if (boot_cpu_has(X86_FEATURE_ZEN3))
991 init_amd_zen3(c);
992 else if (boot_cpu_has(X86_FEATURE_ZEN4))
993 init_amd_zen4(c);
994 else if (boot_cpu_has(X86_FEATURE_ZEN5))
995 init_amd_zen5(c);
996
997 /*
998 * Enable workaround for FXSAVE leak on CPUs
999 * without a XSaveErPtr feature
1000 */
1001 if ((c->x86 >= 6) && (!cpu_has(c, X86_FEATURE_XSAVEERPTR)))
1002 set_cpu_bug(c, X86_BUG_FXSAVE_LEAK);
1003
1004 cpu_detect_cache_sizes(c);
1005
1006 srat_detect_node(c);
1007
1008 init_amd_cacheinfo(c);
1009
1010 if (cpu_has(c, X86_FEATURE_SVM)) {
1011 rdmsrl(MSR_VM_CR, vm_cr);
1012 if (vm_cr & SVM_VM_CR_SVM_DIS_MASK) {
1013 pr_notice_once("SVM disabled (by BIOS) in MSR_VM_CR\n");
1014 clear_cpu_cap(c, X86_FEATURE_SVM);
1015 }
1016 }
1017
1018 if (!cpu_has(c, X86_FEATURE_LFENCE_RDTSC) && cpu_has(c, X86_FEATURE_XMM2)) {
1019 /*
1020 * Use LFENCE for execution serialization. On families which
1021 * don't have that MSR, LFENCE is already serializing.
1022 * msr_set_bit() uses the safe accessors, too, even if the MSR
1023 * is not present.
1024 */
1025 msr_set_bit(MSR_AMD64_DE_CFG,
1026 MSR_AMD64_DE_CFG_LFENCE_SERIALIZE_BIT);
1027
1028 /* A serializing LFENCE stops RDTSC speculation */
1029 set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
1030 }
1031
1032 /*
1033 * Family 0x12 and above processors have APIC timer
1034 * running in deep C states.
1035 */
1036 if (c->x86 > 0x11)
1037 set_cpu_cap(c, X86_FEATURE_ARAT);
1038
1039 /* 3DNow or LM implies PREFETCHW */
1040 if (!cpu_has(c, X86_FEATURE_3DNOWPREFETCH))
1041 if (cpu_has(c, X86_FEATURE_3DNOW) || cpu_has(c, X86_FEATURE_LM))
1042 set_cpu_cap(c, X86_FEATURE_3DNOWPREFETCH);
1043
1044 /* AMD CPUs don't reset SS attributes on SYSRET, Xen does. */
1045 if (!cpu_feature_enabled(X86_FEATURE_XENPV))
1046 set_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS);
1047
1048 /*
1049 * Turn on the Instructions Retired free counter on machines not
1050 * susceptible to erratum #1054 "Instructions Retired Performance
1051 * Counter May Be Inaccurate".
1052 */
1053 if (cpu_has(c, X86_FEATURE_IRPERF) &&
1054 (boot_cpu_has(X86_FEATURE_ZEN1) && c->x86_model > 0x2f))
1055 msr_set_bit(MSR_K7_HWCR, MSR_K7_HWCR_IRPERF_EN_BIT);
1056
1057 check_null_seg_clears_base(c);
1058
1059 /*
1060 * Make sure EFER[AIBRSE - Automatic IBRS Enable] is set. The APs are brought up
1061 * using the trampoline code and as part of it, MSR_EFER gets prepared there in
1062 * order to be replicated onto them. Regardless, set it here again, if not set,
1063 * to protect against any future refactoring/code reorganization which might
1064 * miss setting this important bit.
1065 */
1066 if (spectre_v2_in_eibrs_mode(spectre_v2_enabled) &&
1067 cpu_has(c, X86_FEATURE_AUTOIBRS))
1068 WARN_ON_ONCE(msr_set_bit(MSR_EFER, _EFER_AUTOIBRS) < 0);
1069
1070 /* AMD CPUs don't need fencing after x2APIC/TSC_DEADLINE MSR writes. */
1071 clear_cpu_cap(c, X86_FEATURE_APIC_MSRS_FENCE);
1072}
1073
1074#ifdef CONFIG_X86_32
1075static unsigned int amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
1076{
1077 /* AMD errata T13 (order #21922) */
1078 if (c->x86 == 6) {
1079 /* Duron Rev A0 */
1080 if (c->x86_model == 3 && c->x86_stepping == 0)
1081 size = 64;
1082 /* Tbird rev A1/A2 */
1083 if (c->x86_model == 4 &&
1084 (c->x86_stepping == 0 || c->x86_stepping == 1))
1085 size = 256;
1086 }
1087 return size;
1088}
1089#endif
1090
1091static void cpu_detect_tlb_amd(struct cpuinfo_x86 *c)
1092{
1093 u32 ebx, eax, ecx, edx;
1094 u16 mask = 0xfff;
1095
1096 if (c->x86 < 0xf)
1097 return;
1098
1099 if (c->extended_cpuid_level < 0x80000006)
1100 return;
1101
1102 cpuid(0x80000006, &eax, &ebx, &ecx, &edx);
1103
1104 tlb_lld_4k[ENTRIES] = (ebx >> 16) & mask;
1105 tlb_lli_4k[ENTRIES] = ebx & mask;
1106
1107 /*
1108 * K8 doesn't have 2M/4M entries in the L2 TLB so read out the L1 TLB
1109 * characteristics from the CPUID function 0x80000005 instead.
1110 */
1111 if (c->x86 == 0xf) {
1112 cpuid(0x80000005, &eax, &ebx, &ecx, &edx);
1113 mask = 0xff;
1114 }
1115
1116 /* Handle DTLB 2M and 4M sizes, fall back to L1 if L2 is disabled */
1117 if (!((eax >> 16) & mask))
1118 tlb_lld_2m[ENTRIES] = (cpuid_eax(0x80000005) >> 16) & 0xff;
1119 else
1120 tlb_lld_2m[ENTRIES] = (eax >> 16) & mask;
1121
1122 /* a 4M entry uses two 2M entries */
1123 tlb_lld_4m[ENTRIES] = tlb_lld_2m[ENTRIES] >> 1;
1124
1125 /* Handle ITLB 2M and 4M sizes, fall back to L1 if L2 is disabled */
1126 if (!(eax & mask)) {
1127 /* Erratum 658 */
1128 if (c->x86 == 0x15 && c->x86_model <= 0x1f) {
1129 tlb_lli_2m[ENTRIES] = 1024;
1130 } else {
1131 cpuid(0x80000005, &eax, &ebx, &ecx, &edx);
1132 tlb_lli_2m[ENTRIES] = eax & 0xff;
1133 }
1134 } else
1135 tlb_lli_2m[ENTRIES] = eax & mask;
1136
1137 tlb_lli_4m[ENTRIES] = tlb_lli_2m[ENTRIES] >> 1;
1138}
1139
1140static const struct cpu_dev amd_cpu_dev = {
1141 .c_vendor = "AMD",
1142 .c_ident = { "AuthenticAMD" },
1143#ifdef CONFIG_X86_32
1144 .legacy_models = {
1145 { .family = 4, .model_names =
1146 {
1147 [3] = "486 DX/2",
1148 [7] = "486 DX/2-WB",
1149 [8] = "486 DX/4",
1150 [9] = "486 DX/4-WB",
1151 [14] = "Am5x86-WT",
1152 [15] = "Am5x86-WB"
1153 }
1154 },
1155 },
1156 .legacy_cache_size = amd_size_cache,
1157#endif
1158 .c_early_init = early_init_amd,
1159 .c_detect_tlb = cpu_detect_tlb_amd,
1160 .c_bsp_init = bsp_init_amd,
1161 .c_init = init_amd,
1162 .c_x86_vendor = X86_VENDOR_AMD,
1163};
1164
1165cpu_dev_register(amd_cpu_dev);
1166
1167static DEFINE_PER_CPU_READ_MOSTLY(unsigned long[4], amd_dr_addr_mask);
1168
1169static unsigned int amd_msr_dr_addr_masks[] = {
1170 MSR_F16H_DR0_ADDR_MASK,
1171 MSR_F16H_DR1_ADDR_MASK,
1172 MSR_F16H_DR1_ADDR_MASK + 1,
1173 MSR_F16H_DR1_ADDR_MASK + 2
1174};
1175
1176void amd_set_dr_addr_mask(unsigned long mask, unsigned int dr)
1177{
1178 int cpu = smp_processor_id();
1179
1180 if (!cpu_feature_enabled(X86_FEATURE_BPEXT))
1181 return;
1182
1183 if (WARN_ON_ONCE(dr >= ARRAY_SIZE(amd_msr_dr_addr_masks)))
1184 return;
1185
1186 if (per_cpu(amd_dr_addr_mask, cpu)[dr] == mask)
1187 return;
1188
1189 wrmsr(amd_msr_dr_addr_masks[dr], mask, 0);
1190 per_cpu(amd_dr_addr_mask, cpu)[dr] = mask;
1191}
1192
1193unsigned long amd_get_dr_addr_mask(unsigned int dr)
1194{
1195 if (!cpu_feature_enabled(X86_FEATURE_BPEXT))
1196 return 0;
1197
1198 if (WARN_ON_ONCE(dr >= ARRAY_SIZE(amd_msr_dr_addr_masks)))
1199 return 0;
1200
1201 return per_cpu(amd_dr_addr_mask[dr], smp_processor_id());
1202}
1203EXPORT_SYMBOL_GPL(amd_get_dr_addr_mask);
1204
1205static void zenbleed_check_cpu(void *unused)
1206{
1207 struct cpuinfo_x86 *c = &cpu_data(smp_processor_id());
1208
1209 zen2_zenbleed_check(c);
1210}
1211
1212void amd_check_microcode(void)
1213{
1214 if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
1215 return;
1216
1217 if (cpu_feature_enabled(X86_FEATURE_ZEN2))
1218 on_each_cpu(zenbleed_check_cpu, NULL, 1);
1219}