Loading...
1/* SPDX-License-Identifier: GPL-2.0+ */
2#ifndef __IBMPHP_H
3#define __IBMPHP_H
4
5/*
6 * IBM Hot Plug Controller Driver
7 *
8 * Written By: Jyoti Shah, Tong Yu, Irene Zubarev, IBM Corporation
9 *
10 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
11 * Copyright (C) 2001-2003 IBM Corp.
12 *
13 * All rights reserved.
14 *
15 * Send feedback to <gregkh@us.ibm.com>
16 *
17 */
18
19#include <linux/pci_hotplug.h>
20
21extern int ibmphp_debug;
22
23#if !defined(MODULE)
24 #define MY_NAME "ibmphpd"
25#else
26 #define MY_NAME THIS_MODULE->name
27#endif
28#define debug(fmt, arg...) do { if (ibmphp_debug == 1) printk(KERN_DEBUG "%s: " fmt, MY_NAME, ## arg); } while (0)
29#define debug_pci(fmt, arg...) do { if (ibmphp_debug) printk(KERN_DEBUG "%s: " fmt, MY_NAME, ## arg); } while (0)
30#define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME, ## arg)
31#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME, ## arg)
32#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME, ## arg)
33
34
35/* EBDA stuff */
36
37/***********************************************************
38* SLOT CAPABILITY *
39***********************************************************/
40
41#define EBDA_SLOT_133_MAX 0x20
42#define EBDA_SLOT_100_MAX 0x10
43#define EBDA_SLOT_66_MAX 0x02
44#define EBDA_SLOT_PCIX_CAP 0x08
45
46
47/************************************************************
48* RESOURCE TYPE *
49************************************************************/
50
51#define EBDA_RSRC_TYPE_MASK 0x03
52#define EBDA_IO_RSRC_TYPE 0x00
53#define EBDA_MEM_RSRC_TYPE 0x01
54#define EBDA_PFM_RSRC_TYPE 0x03
55#define EBDA_RES_RSRC_TYPE 0x02
56
57
58/*************************************************************
59* IO RESTRICTION TYPE *
60*************************************************************/
61
62#define EBDA_IO_RESTRI_MASK 0x0c
63#define EBDA_NO_RESTRI 0x00
64#define EBDA_AVO_VGA_ADDR 0x04
65#define EBDA_AVO_VGA_ADDR_AND_ALIA 0x08
66#define EBDA_AVO_ISA_ADDR 0x0c
67
68
69/**************************************************************
70* DEVICE TYPE DEF *
71**************************************************************/
72
73#define EBDA_DEV_TYPE_MASK 0x10
74#define EBDA_PCI_DEV 0x10
75#define EBDA_NON_PCI_DEV 0x00
76
77
78/***************************************************************
79* PRIMARY DEF DEFINITION *
80***************************************************************/
81
82#define EBDA_PRI_DEF_MASK 0x20
83#define EBDA_PRI_PCI_BUS_INFO 0x20
84#define EBDA_NORM_DEV_RSRC_INFO 0x00
85
86
87//--------------------------------------------------------------
88// RIO TABLE DATA STRUCTURE
89//--------------------------------------------------------------
90
91struct rio_table_hdr {
92 u8 ver_num;
93 u8 scal_count;
94 u8 riodev_count;
95 u16 offset;
96};
97
98//-------------------------------------------------------------
99// SCALABILITY DETAIL
100//-------------------------------------------------------------
101
102struct scal_detail {
103 u8 node_id;
104 u32 cbar;
105 u8 port0_node_connect;
106 u8 port0_port_connect;
107 u8 port1_node_connect;
108 u8 port1_port_connect;
109 u8 port2_node_connect;
110 u8 port2_port_connect;
111 u8 chassis_num;
112// struct list_head scal_detail_list;
113};
114
115//--------------------------------------------------------------
116// RIO DETAIL
117//--------------------------------------------------------------
118
119struct rio_detail {
120 u8 rio_node_id;
121 u32 bbar;
122 u8 rio_type;
123 u8 owner_id;
124 u8 port0_node_connect;
125 u8 port0_port_connect;
126 u8 port1_node_connect;
127 u8 port1_port_connect;
128 u8 first_slot_num;
129 u8 status;
130 u8 wpindex;
131 u8 chassis_num;
132 struct list_head rio_detail_list;
133};
134
135struct opt_rio {
136 u8 rio_type;
137 u8 chassis_num;
138 u8 first_slot_num;
139 u8 middle_num;
140 struct list_head opt_rio_list;
141};
142
143struct opt_rio_lo {
144 u8 rio_type;
145 u8 chassis_num;
146 u8 first_slot_num;
147 u8 middle_num;
148 u8 pack_count;
149 struct list_head opt_rio_lo_list;
150};
151
152/****************************************************************
153* HPC DESCRIPTOR NODE *
154****************************************************************/
155
156struct ebda_hpc_list {
157 u8 format;
158 u16 num_ctlrs;
159 short phys_addr;
160// struct list_head ebda_hpc_list;
161};
162/*****************************************************************
163* IN HPC DATA STRUCTURE, THE ASSOCIATED SLOT AND BUS *
164* STRUCTURE *
165*****************************************************************/
166
167struct ebda_hpc_slot {
168 u8 slot_num;
169 u32 slot_bus_num;
170 u8 ctl_index;
171 u8 slot_cap;
172};
173
174struct ebda_hpc_bus {
175 u32 bus_num;
176 u8 slots_at_33_conv;
177 u8 slots_at_66_conv;
178 u8 slots_at_66_pcix;
179 u8 slots_at_100_pcix;
180 u8 slots_at_133_pcix;
181};
182
183
184/********************************************************************
185* THREE TYPE OF HOT PLUG CONTROLLER *
186********************************************************************/
187
188struct isa_ctlr_access {
189 u16 io_start;
190 u16 io_end;
191};
192
193struct pci_ctlr_access {
194 u8 bus;
195 u8 dev_fun;
196};
197
198struct wpeg_i2c_ctlr_access {
199 ulong wpegbbar;
200 u8 i2c_addr;
201};
202
203#define HPC_DEVICE_ID 0x0246
204#define HPC_SUBSYSTEM_ID 0x0247
205#define HPC_PCI_OFFSET 0x40
206/*************************************************************************
207* RSTC DESCRIPTOR NODE *
208*************************************************************************/
209
210struct ebda_rsrc_list {
211 u8 format;
212 u16 num_entries;
213 u16 phys_addr;
214 struct ebda_rsrc_list *next;
215};
216
217
218/***************************************************************************
219* PCI RSRC NODE *
220***************************************************************************/
221
222struct ebda_pci_rsrc {
223 u8 rsrc_type;
224 u8 bus_num;
225 u8 dev_fun;
226 u32 start_addr;
227 u32 end_addr;
228 u8 marked; /* for NVRAM */
229 struct list_head ebda_pci_rsrc_list;
230};
231
232
233/***********************************************************
234* BUS_INFO DATE STRUCTURE *
235***********************************************************/
236
237struct bus_info {
238 u8 slot_min;
239 u8 slot_max;
240 u8 slot_count;
241 u8 busno;
242 u8 controller_id;
243 u8 current_speed;
244 u8 current_bus_mode;
245 u8 index;
246 u8 slots_at_33_conv;
247 u8 slots_at_66_conv;
248 u8 slots_at_66_pcix;
249 u8 slots_at_100_pcix;
250 u8 slots_at_133_pcix;
251 struct list_head bus_info_list;
252};
253
254
255/***********************************************************
256* GLOBAL VARIABLES *
257***********************************************************/
258extern struct list_head ibmphp_ebda_pci_rsrc_head;
259extern struct list_head ibmphp_slot_head;
260/***********************************************************
261* FUNCTION PROTOTYPES *
262***********************************************************/
263
264void ibmphp_free_ebda_hpc_queue(void);
265int ibmphp_access_ebda(void);
266struct slot *ibmphp_get_slot_from_physical_num(u8);
267int ibmphp_get_total_hp_slots(void);
268void ibmphp_free_ibm_slot(struct slot *);
269void ibmphp_free_bus_info_queue(void);
270void ibmphp_free_ebda_pci_rsrc_queue(void);
271struct bus_info *ibmphp_find_same_bus_num(u32);
272int ibmphp_get_bus_index(u8);
273u16 ibmphp_get_total_controllers(void);
274int ibmphp_register_pci(void);
275
276/* passed parameters */
277#define MEM 0
278#define IO 1
279#define PFMEM 2
280
281/* bit masks */
282#define RESTYPE 0x03
283#define IOMASK 0x00 /* will need to take its complement */
284#define MMASK 0x01
285#define PFMASK 0x03
286#define PCIDEVMASK 0x10 /* we should always have PCI devices */
287#define PRIMARYBUSMASK 0x20
288
289/* pci specific defines */
290#define PCI_VENDOR_ID_NOTVALID 0xFFFF
291#define PCI_HEADER_TYPE_MULTIDEVICE 0x80
292#define PCI_HEADER_TYPE_MULTIBRIDGE 0x81
293
294#define LATENCY 0x64
295#define CACHE 64
296#define DEVICEENABLE 0x015F /* CPQ has 0x0157 */
297
298#define IOBRIDGE 0x1000 /* 4k */
299#define MEMBRIDGE 0x100000 /* 1M */
300
301/* irqs */
302#define SCSI_IRQ 0x09
303#define LAN_IRQ 0x0A
304#define OTHER_IRQ 0x0B
305
306/* Data Structures */
307
308/* type is of the form x x xx xx
309 * | | | |_ 00 - I/O, 01 - Memory, 11 - PFMemory
310 * | | - 00 - No Restrictions, 01 - Avoid VGA, 10 - Avoid
311 * | | VGA and their aliases, 11 - Avoid ISA
312 * | - 1 - PCI device, 0 - non pci device
313 * - 1 - Primary PCI Bus Information (0 if Normal device)
314 * the IO restrictions [2:3] are only for primary buses
315 */
316
317
318/* we need this struct because there could be several resource blocks
319 * allocated per primary bus in the EBDA
320 */
321struct range_node {
322 int rangeno;
323 u32 start;
324 u32 end;
325 struct range_node *next;
326};
327
328struct bus_node {
329 u8 busno;
330 int noIORanges;
331 struct range_node *rangeIO;
332 int noMemRanges;
333 struct range_node *rangeMem;
334 int noPFMemRanges;
335 struct range_node *rangePFMem;
336 int needIOUpdate;
337 int needMemUpdate;
338 int needPFMemUpdate;
339 struct resource_node *firstIO; /* first IO resource on the Bus */
340 struct resource_node *firstMem; /* first memory resource on the Bus */
341 struct resource_node *firstPFMem; /* first prefetchable memory resource on the Bus */
342 struct resource_node *firstPFMemFromMem; /* when run out of pfmem available, taking from Mem */
343 struct list_head bus_list;
344};
345
346struct resource_node {
347 int rangeno;
348 u8 busno;
349 u8 devfunc;
350 u32 start;
351 u32 end;
352 u32 len;
353 int type; /* MEM, IO, PFMEM */
354 u8 fromMem; /* this is to indicate that the range is from
355 * from the Memory bucket rather than from PFMem */
356 struct resource_node *next;
357 struct resource_node *nextRange; /* for the other mem range on bus */
358};
359
360struct res_needed {
361 u32 mem;
362 u32 pfmem;
363 u32 io;
364 u8 not_correct; /* needed for return */
365 int devices[32]; /* for device numbers behind this bridge */
366};
367
368/* functions */
369
370int ibmphp_rsrc_init(void);
371int ibmphp_add_resource(struct resource_node *);
372int ibmphp_remove_resource(struct resource_node *);
373int ibmphp_find_resource(struct bus_node *, u32, struct resource_node **, int);
374int ibmphp_check_resource(struct resource_node *, u8);
375int ibmphp_remove_bus(struct bus_node *, u8);
376void ibmphp_free_resources(void);
377int ibmphp_add_pfmem_from_mem(struct resource_node *);
378struct bus_node *ibmphp_find_res_bus(u8);
379void ibmphp_print_test(void); /* for debugging purposes */
380
381int ibmphp_hpc_readslot(struct slot *, u8, u8 *);
382int ibmphp_hpc_writeslot(struct slot *, u8);
383void ibmphp_lock_operations(void);
384void ibmphp_unlock_operations(void);
385int ibmphp_hpc_start_poll_thread(void);
386void ibmphp_hpc_stop_poll_thread(void);
387
388//----------------------------------------------------------------------------
389
390
391//----------------------------------------------------------------------------
392// HPC return codes
393//----------------------------------------------------------------------------
394#define HPC_ERROR 0xFF
395
396//-----------------------------------------------------------------------------
397// BUS INFO
398//-----------------------------------------------------------------------------
399#define BUS_SPEED 0x30
400#define BUS_MODE 0x40
401#define BUS_MODE_PCIX 0x01
402#define BUS_MODE_PCI 0x00
403#define BUS_SPEED_2 0x20
404#define BUS_SPEED_1 0x10
405#define BUS_SPEED_33 0x00
406#define BUS_SPEED_66 0x01
407#define BUS_SPEED_100 0x02
408#define BUS_SPEED_133 0x03
409#define BUS_SPEED_66PCIX 0x04
410#define BUS_SPEED_66UNKNOWN 0x05
411#define BUS_STATUS_AVAILABLE 0x01
412#define BUS_CONTROL_AVAILABLE 0x02
413#define SLOT_LATCH_REGS_SUPPORTED 0x10
414
415#define PRGM_MODEL_REV_LEVEL 0xF0
416#define MAX_ADAPTER_NONE 0x09
417
418//----------------------------------------------------------------------------
419// HPC 'write' operations/commands
420//----------------------------------------------------------------------------
421// Command Code State Write to reg
422// Machine at index
423//------------------------- ---- ------- ------------
424#define HPC_CTLR_ENABLEIRQ 0x00 // N 15
425#define HPC_CTLR_DISABLEIRQ 0x01 // N 15
426#define HPC_SLOT_OFF 0x02 // Y 0-14
427#define HPC_SLOT_ON 0x03 // Y 0-14
428#define HPC_SLOT_ATTNOFF 0x04 // N 0-14
429#define HPC_SLOT_ATTNON 0x05 // N 0-14
430#define HPC_CTLR_CLEARIRQ 0x06 // N 15
431#define HPC_CTLR_RESET 0x07 // Y 15
432#define HPC_CTLR_IRQSTEER 0x08 // N 15
433#define HPC_BUS_33CONVMODE 0x09 // Y 31-34
434#define HPC_BUS_66CONVMODE 0x0A // Y 31-34
435#define HPC_BUS_66PCIXMODE 0x0B // Y 31-34
436#define HPC_BUS_100PCIXMODE 0x0C // Y 31-34
437#define HPC_BUS_133PCIXMODE 0x0D // Y 31-34
438#define HPC_ALLSLOT_OFF 0x11 // Y 15
439#define HPC_ALLSLOT_ON 0x12 // Y 15
440#define HPC_SLOT_BLINKLED 0x13 // N 0-14
441
442//----------------------------------------------------------------------------
443// read commands
444//----------------------------------------------------------------------------
445#define READ_SLOTSTATUS 0x01
446#define READ_EXTSLOTSTATUS 0x02
447#define READ_BUSSTATUS 0x03
448#define READ_CTLRSTATUS 0x04
449#define READ_ALLSTAT 0x05
450#define READ_ALLSLOT 0x06
451#define READ_SLOTLATCHLOWREG 0x07
452#define READ_REVLEVEL 0x08
453#define READ_HPCOPTIONS 0x09
454//----------------------------------------------------------------------------
455// slot status
456//----------------------------------------------------------------------------
457#define HPC_SLOT_POWER 0x01
458#define HPC_SLOT_CONNECT 0x02
459#define HPC_SLOT_ATTN 0x04
460#define HPC_SLOT_PRSNT2 0x08
461#define HPC_SLOT_PRSNT1 0x10
462#define HPC_SLOT_PWRGD 0x20
463#define HPC_SLOT_BUS_SPEED 0x40
464#define HPC_SLOT_LATCH 0x80
465
466//----------------------------------------------------------------------------
467// HPC_SLOT_POWER status return codes
468//----------------------------------------------------------------------------
469#define HPC_SLOT_POWER_OFF 0x00
470#define HPC_SLOT_POWER_ON 0x01
471
472//----------------------------------------------------------------------------
473// HPC_SLOT_CONNECT status return codes
474//----------------------------------------------------------------------------
475#define HPC_SLOT_CONNECTED 0x00
476#define HPC_SLOT_DISCONNECTED 0x01
477
478//----------------------------------------------------------------------------
479// HPC_SLOT_ATTN status return codes
480//----------------------------------------------------------------------------
481#define HPC_SLOT_ATTN_OFF 0x00
482#define HPC_SLOT_ATTN_ON 0x01
483#define HPC_SLOT_ATTN_BLINK 0x02
484
485//----------------------------------------------------------------------------
486// HPC_SLOT_PRSNT status return codes
487//----------------------------------------------------------------------------
488#define HPC_SLOT_EMPTY 0x00
489#define HPC_SLOT_PRSNT_7 0x01
490#define HPC_SLOT_PRSNT_15 0x02
491#define HPC_SLOT_PRSNT_25 0x03
492
493//----------------------------------------------------------------------------
494// HPC_SLOT_PWRGD status return codes
495//----------------------------------------------------------------------------
496#define HPC_SLOT_PWRGD_FAULT_NONE 0x00
497#define HPC_SLOT_PWRGD_GOOD 0x01
498
499//----------------------------------------------------------------------------
500// HPC_SLOT_BUS_SPEED status return codes
501//----------------------------------------------------------------------------
502#define HPC_SLOT_BUS_SPEED_OK 0x00
503#define HPC_SLOT_BUS_SPEED_MISM 0x01
504
505//----------------------------------------------------------------------------
506// HPC_SLOT_LATCH status return codes
507//----------------------------------------------------------------------------
508#define HPC_SLOT_LATCH_OPEN 0x01 // NOTE : in PCI spec bit off = open
509#define HPC_SLOT_LATCH_CLOSED 0x00 // NOTE : in PCI spec bit on = closed
510
511
512//----------------------------------------------------------------------------
513// extended slot status
514//----------------------------------------------------------------------------
515#define HPC_SLOT_PCIX 0x01
516#define HPC_SLOT_SPEED1 0x02
517#define HPC_SLOT_SPEED2 0x04
518#define HPC_SLOT_BLINK_ATTN 0x08
519#define HPC_SLOT_RSRVD1 0x10
520#define HPC_SLOT_RSRVD2 0x20
521#define HPC_SLOT_BUS_MODE 0x40
522#define HPC_SLOT_RSRVD3 0x80
523
524//----------------------------------------------------------------------------
525// HPC_XSLOT_PCIX_CAP status return codes
526//----------------------------------------------------------------------------
527#define HPC_SLOT_PCIX_NO 0x00
528#define HPC_SLOT_PCIX_YES 0x01
529
530//----------------------------------------------------------------------------
531// HPC_XSLOT_SPEED status return codes
532//----------------------------------------------------------------------------
533#define HPC_SLOT_SPEED_33 0x00
534#define HPC_SLOT_SPEED_66 0x01
535#define HPC_SLOT_SPEED_133 0x02
536
537//----------------------------------------------------------------------------
538// HPC_XSLOT_ATTN_BLINK status return codes
539//----------------------------------------------------------------------------
540#define HPC_SLOT_ATTN_BLINK_OFF 0x00
541#define HPC_SLOT_ATTN_BLINK_ON 0x01
542
543//----------------------------------------------------------------------------
544// HPC_XSLOT_BUS_MODE status return codes
545//----------------------------------------------------------------------------
546#define HPC_SLOT_BUS_MODE_OK 0x00
547#define HPC_SLOT_BUS_MODE_MISM 0x01
548
549//----------------------------------------------------------------------------
550// Controller status
551//----------------------------------------------------------------------------
552#define HPC_CTLR_WORKING 0x01
553#define HPC_CTLR_FINISHED 0x02
554#define HPC_CTLR_RESULT0 0x04
555#define HPC_CTLR_RESULT1 0x08
556#define HPC_CTLR_RESULE2 0x10
557#define HPC_CTLR_RESULT3 0x20
558#define HPC_CTLR_IRQ_ROUTG 0x40
559#define HPC_CTLR_IRQ_PENDG 0x80
560
561//----------------------------------------------------------------------------
562// HPC_CTLR_WORKING status return codes
563//----------------------------------------------------------------------------
564#define HPC_CTLR_WORKING_NO 0x00
565#define HPC_CTLR_WORKING_YES 0x01
566
567//----------------------------------------------------------------------------
568// HPC_CTLR_FINISHED status return codes
569//----------------------------------------------------------------------------
570#define HPC_CTLR_FINISHED_NO 0x00
571#define HPC_CTLR_FINISHED_YES 0x01
572
573//----------------------------------------------------------------------------
574// HPC_CTLR_RESULT status return codes
575//----------------------------------------------------------------------------
576#define HPC_CTLR_RESULT_SUCCESS 0x00
577#define HPC_CTLR_RESULT_FAILED 0x01
578#define HPC_CTLR_RESULT_RSVD 0x02
579#define HPC_CTLR_RESULT_NORESP 0x03
580
581
582//----------------------------------------------------------------------------
583// macro for slot info
584//----------------------------------------------------------------------------
585#define SLOT_POWER(s) ((u8) ((s & HPC_SLOT_POWER) \
586 ? HPC_SLOT_POWER_ON : HPC_SLOT_POWER_OFF))
587
588#define SLOT_CONNECT(s) ((u8) ((s & HPC_SLOT_CONNECT) \
589 ? HPC_SLOT_DISCONNECTED : HPC_SLOT_CONNECTED))
590
591#define SLOT_ATTN(s, es) ((u8) ((es & HPC_SLOT_BLINK_ATTN) \
592 ? HPC_SLOT_ATTN_BLINK \
593 : ((s & HPC_SLOT_ATTN) ? HPC_SLOT_ATTN_ON : HPC_SLOT_ATTN_OFF)))
594
595#define SLOT_PRESENT(s) ((u8) ((s & HPC_SLOT_PRSNT1) \
596 ? ((s & HPC_SLOT_PRSNT2) ? HPC_SLOT_EMPTY : HPC_SLOT_PRSNT_15) \
597 : ((s & HPC_SLOT_PRSNT2) ? HPC_SLOT_PRSNT_25 : HPC_SLOT_PRSNT_7)))
598
599#define SLOT_PWRGD(s) ((u8) ((s & HPC_SLOT_PWRGD) \
600 ? HPC_SLOT_PWRGD_GOOD : HPC_SLOT_PWRGD_FAULT_NONE))
601
602#define SLOT_BUS_SPEED(s) ((u8) ((s & HPC_SLOT_BUS_SPEED) \
603 ? HPC_SLOT_BUS_SPEED_MISM : HPC_SLOT_BUS_SPEED_OK))
604
605#define SLOT_LATCH(s) ((u8) ((s & HPC_SLOT_LATCH) \
606 ? HPC_SLOT_LATCH_CLOSED : HPC_SLOT_LATCH_OPEN))
607
608#define SLOT_PCIX(es) ((u8) ((es & HPC_SLOT_PCIX) \
609 ? HPC_SLOT_PCIX_YES : HPC_SLOT_PCIX_NO))
610
611#define SLOT_SPEED(es) ((u8) ((es & HPC_SLOT_SPEED2) \
612 ? ((es & HPC_SLOT_SPEED1) ? HPC_SLOT_SPEED_133 \
613 : HPC_SLOT_SPEED_66) \
614 : HPC_SLOT_SPEED_33))
615
616#define SLOT_BUS_MODE(es) ((u8) ((es & HPC_SLOT_BUS_MODE) \
617 ? HPC_SLOT_BUS_MODE_MISM : HPC_SLOT_BUS_MODE_OK))
618
619//--------------------------------------------------------------------------
620// macro for bus info
621//---------------------------------------------------------------------------
622#define CURRENT_BUS_SPEED(s) ((u8) (s & BUS_SPEED_2) \
623 ? ((s & BUS_SPEED_1) ? BUS_SPEED_133 : BUS_SPEED_100) \
624 : ((s & BUS_SPEED_1) ? BUS_SPEED_66 : BUS_SPEED_33))
625
626#define CURRENT_BUS_MODE(s) ((u8) (s & BUS_MODE) ? BUS_MODE_PCIX : BUS_MODE_PCI)
627
628#define READ_BUS_STATUS(s) ((u8) (s->options & BUS_STATUS_AVAILABLE))
629
630#define READ_BUS_MODE(s) ((s->revision & PRGM_MODEL_REV_LEVEL) >= 0x20)
631
632#define SET_BUS_STATUS(s) ((u8) (s->options & BUS_CONTROL_AVAILABLE))
633
634#define READ_SLOT_LATCH(s) ((u8) (s->options & SLOT_LATCH_REGS_SUPPORTED))
635
636//----------------------------------------------------------------------------
637// macro for controller info
638//----------------------------------------------------------------------------
639#define CTLR_WORKING(c) ((u8) ((c & HPC_CTLR_WORKING) \
640 ? HPC_CTLR_WORKING_YES : HPC_CTLR_WORKING_NO))
641#define CTLR_FINISHED(c) ((u8) ((c & HPC_CTLR_FINISHED) \
642 ? HPC_CTLR_FINISHED_YES : HPC_CTLR_FINISHED_NO))
643#define CTLR_RESULT(c) ((u8) ((c & HPC_CTLR_RESULT1) \
644 ? ((c & HPC_CTLR_RESULT0) ? HPC_CTLR_RESULT_NORESP \
645 : HPC_CTLR_RESULT_RSVD) \
646 : ((c & HPC_CTLR_RESULT0) ? HPC_CTLR_RESULT_FAILED \
647 : HPC_CTLR_RESULT_SUCCESS)))
648
649// command that affect the state machine of HPC
650#define NEEDTOCHECK_CMDSTATUS(c) ((c == HPC_SLOT_OFF) || \
651 (c == HPC_SLOT_ON) || \
652 (c == HPC_CTLR_RESET) || \
653 (c == HPC_BUS_33CONVMODE) || \
654 (c == HPC_BUS_66CONVMODE) || \
655 (c == HPC_BUS_66PCIXMODE) || \
656 (c == HPC_BUS_100PCIXMODE) || \
657 (c == HPC_BUS_133PCIXMODE) || \
658 (c == HPC_ALLSLOT_OFF) || \
659 (c == HPC_ALLSLOT_ON))
660
661
662/* Core part of the driver */
663
664#define ENABLE 1
665#define DISABLE 0
666
667#define CARD_INFO 0x07
668#define PCIX133 0x07
669#define PCIX66 0x05
670#define PCI66 0x04
671
672extern struct pci_bus *ibmphp_pci_bus;
673
674/* Variables */
675
676struct pci_func {
677 struct pci_dev *dev; /* from the OS */
678 u8 busno;
679 u8 device;
680 u8 function;
681 struct resource_node *io[6];
682 struct resource_node *mem[6];
683 struct resource_node *pfmem[6];
684 struct pci_func *next;
685 int devices[32]; /* for bridge config */
686 u8 irq[4]; /* for interrupt config */
687 u8 bus; /* flag for unconfiguring, to say if PPB */
688};
689
690struct slot {
691 u8 bus;
692 u8 device;
693 u8 number;
694 u8 real_physical_slot_num;
695 u32 capabilities;
696 u8 supported_speed;
697 u8 supported_bus_mode;
698 u8 flag; /* this is for disable slot and polling */
699 u8 ctlr_index;
700 struct hotplug_slot hotplug_slot;
701 struct controller *ctrl;
702 struct pci_func *func;
703 u8 irq[4];
704 int bit_mode; /* 0 = 32, 1 = 64 */
705 struct bus_info *bus_on;
706 struct list_head ibm_slot_list;
707 u8 status;
708 u8 ext_status;
709 u8 busstatus;
710};
711
712struct controller {
713 struct ebda_hpc_slot *slots;
714 struct ebda_hpc_bus *buses;
715 struct pci_dev *ctrl_dev; /* in case where controller is PCI */
716 u8 starting_slot_num; /* starting and ending slot #'s this ctrl controls*/
717 u8 ending_slot_num;
718 u8 revision;
719 u8 options; /* which options HPC supports */
720 u8 status;
721 u8 ctlr_id;
722 u8 slot_count;
723 u8 bus_count;
724 u8 ctlr_relative_id;
725 u32 irq;
726 union {
727 struct isa_ctlr_access isa_ctlr;
728 struct pci_ctlr_access pci_ctlr;
729 struct wpeg_i2c_ctlr_access wpeg_ctlr;
730 } u;
731 u8 ctlr_type;
732 struct list_head ebda_hpc_list;
733};
734
735/* Functions */
736
737int ibmphp_init_devno(struct slot **); /* This function is called from EBDA, so we need it not be static */
738int ibmphp_do_disable_slot(struct slot *slot_cur);
739int ibmphp_update_slot_info(struct slot *); /* This function is called from HPC, so we need it to not be be static */
740int ibmphp_configure_card(struct pci_func *, u8);
741int ibmphp_unconfigure_card(struct slot **, int);
742extern const struct hotplug_slot_ops ibmphp_hotplug_slot_ops;
743
744static inline struct slot *to_slot(struct hotplug_slot *hotplug_slot)
745{
746 return container_of(hotplug_slot, struct slot, hotplug_slot);
747}
748
749#endif //__IBMPHP_H
750
1/* SPDX-License-Identifier: GPL-2.0+ */
2#ifndef __IBMPHP_H
3#define __IBMPHP_H
4
5/*
6 * IBM Hot Plug Controller Driver
7 *
8 * Written By: Jyoti Shah, Tong Yu, Irene Zubarev, IBM Corporation
9 *
10 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
11 * Copyright (C) 2001-2003 IBM Corp.
12 *
13 * All rights reserved.
14 *
15 * Send feedback to <gregkh@us.ibm.com>
16 *
17 */
18
19#include <linux/pci_hotplug.h>
20
21extern int ibmphp_debug;
22
23#if !defined(MODULE)
24 #define MY_NAME "ibmphpd"
25#else
26 #define MY_NAME THIS_MODULE->name
27#endif
28#define debug(fmt, arg...) do { if (ibmphp_debug == 1) printk(KERN_DEBUG "%s: " fmt, MY_NAME, ## arg); } while (0)
29#define debug_pci(fmt, arg...) do { if (ibmphp_debug) printk(KERN_DEBUG "%s: " fmt, MY_NAME, ## arg); } while (0)
30#define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME, ## arg)
31#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME, ## arg)
32#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME, ## arg)
33
34
35/* EBDA stuff */
36
37/***********************************************************
38* SLOT CAPABILITY *
39***********************************************************/
40
41#define EBDA_SLOT_133_MAX 0x20
42#define EBDA_SLOT_100_MAX 0x10
43#define EBDA_SLOT_66_MAX 0x02
44#define EBDA_SLOT_PCIX_CAP 0x08
45
46
47/************************************************************
48* RESOURCE TYPE *
49************************************************************/
50
51#define EBDA_RSRC_TYPE_MASK 0x03
52#define EBDA_IO_RSRC_TYPE 0x00
53#define EBDA_MEM_RSRC_TYPE 0x01
54#define EBDA_PFM_RSRC_TYPE 0x03
55#define EBDA_RES_RSRC_TYPE 0x02
56
57
58/*************************************************************
59* IO RESTRICTION TYPE *
60*************************************************************/
61
62#define EBDA_IO_RESTRI_MASK 0x0c
63#define EBDA_NO_RESTRI 0x00
64#define EBDA_AVO_VGA_ADDR 0x04
65#define EBDA_AVO_VGA_ADDR_AND_ALIA 0x08
66#define EBDA_AVO_ISA_ADDR 0x0c
67
68
69/**************************************************************
70* DEVICE TYPE DEF *
71**************************************************************/
72
73#define EBDA_DEV_TYPE_MASK 0x10
74#define EBDA_PCI_DEV 0x10
75#define EBDA_NON_PCI_DEV 0x00
76
77
78/***************************************************************
79* PRIMARY DEF DEFINITION *
80***************************************************************/
81
82#define EBDA_PRI_DEF_MASK 0x20
83#define EBDA_PRI_PCI_BUS_INFO 0x20
84#define EBDA_NORM_DEV_RSRC_INFO 0x00
85
86
87//--------------------------------------------------------------
88// RIO TABLE DATA STRUCTURE
89//--------------------------------------------------------------
90
91struct rio_table_hdr {
92 u8 ver_num;
93 u8 scal_count;
94 u8 riodev_count;
95 u16 offset;
96};
97
98//-------------------------------------------------------------
99// SCALABILITY DETAIL
100//-------------------------------------------------------------
101
102struct scal_detail {
103 u8 node_id;
104 u32 cbar;
105 u8 port0_node_connect;
106 u8 port0_port_connect;
107 u8 port1_node_connect;
108 u8 port1_port_connect;
109 u8 port2_node_connect;
110 u8 port2_port_connect;
111 u8 chassis_num;
112// struct list_head scal_detail_list;
113};
114
115//--------------------------------------------------------------
116// RIO DETAIL
117//--------------------------------------------------------------
118
119struct rio_detail {
120 u8 rio_node_id;
121 u32 bbar;
122 u8 rio_type;
123 u8 owner_id;
124 u8 port0_node_connect;
125 u8 port0_port_connect;
126 u8 port1_node_connect;
127 u8 port1_port_connect;
128 u8 first_slot_num;
129 u8 status;
130 u8 wpindex;
131 u8 chassis_num;
132 struct list_head rio_detail_list;
133};
134
135struct opt_rio {
136 u8 rio_type;
137 u8 chassis_num;
138 u8 first_slot_num;
139 u8 middle_num;
140 struct list_head opt_rio_list;
141};
142
143struct opt_rio_lo {
144 u8 rio_type;
145 u8 chassis_num;
146 u8 first_slot_num;
147 u8 middle_num;
148 u8 pack_count;
149 struct list_head opt_rio_lo_list;
150};
151
152/****************************************************************
153* HPC DESCRIPTOR NODE *
154****************************************************************/
155
156struct ebda_hpc_list {
157 u8 format;
158 u16 num_ctlrs;
159 short phys_addr;
160// struct list_head ebda_hpc_list;
161};
162/*****************************************************************
163* IN HPC DATA STRUCTURE, THE ASSOCIATED SLOT AND BUS *
164* STRUCTURE *
165*****************************************************************/
166
167struct ebda_hpc_slot {
168 u8 slot_num;
169 u32 slot_bus_num;
170 u8 ctl_index;
171 u8 slot_cap;
172};
173
174struct ebda_hpc_bus {
175 u32 bus_num;
176 u8 slots_at_33_conv;
177 u8 slots_at_66_conv;
178 u8 slots_at_66_pcix;
179 u8 slots_at_100_pcix;
180 u8 slots_at_133_pcix;
181};
182
183
184/********************************************************************
185* THREE TYPE OF HOT PLUG CONTROLLER *
186********************************************************************/
187
188struct isa_ctlr_access {
189 u16 io_start;
190 u16 io_end;
191};
192
193struct pci_ctlr_access {
194 u8 bus;
195 u8 dev_fun;
196};
197
198struct wpeg_i2c_ctlr_access {
199 ulong wpegbbar;
200 u8 i2c_addr;
201};
202
203#define HPC_DEVICE_ID 0x0246
204#define HPC_SUBSYSTEM_ID 0x0247
205#define HPC_PCI_OFFSET 0x40
206/*************************************************************************
207* RSTC DESCRIPTOR NODE *
208*************************************************************************/
209
210struct ebda_rsrc_list {
211 u8 format;
212 u16 num_entries;
213 u16 phys_addr;
214 struct ebda_rsrc_list *next;
215};
216
217
218/***************************************************************************
219* PCI RSRC NODE *
220***************************************************************************/
221
222struct ebda_pci_rsrc {
223 u8 rsrc_type;
224 u8 bus_num;
225 u8 dev_fun;
226 u32 start_addr;
227 u32 end_addr;
228 u8 marked; /* for NVRAM */
229 struct list_head ebda_pci_rsrc_list;
230};
231
232
233/***********************************************************
234* BUS_INFO DATE STRUCTURE *
235***********************************************************/
236
237struct bus_info {
238 u8 slot_min;
239 u8 slot_max;
240 u8 slot_count;
241 u8 busno;
242 u8 controller_id;
243 u8 current_speed;
244 u8 current_bus_mode;
245 u8 index;
246 u8 slots_at_33_conv;
247 u8 slots_at_66_conv;
248 u8 slots_at_66_pcix;
249 u8 slots_at_100_pcix;
250 u8 slots_at_133_pcix;
251 struct list_head bus_info_list;
252};
253
254
255/***********************************************************
256* GLOBAL VARIABLES *
257***********************************************************/
258extern struct list_head ibmphp_ebda_pci_rsrc_head;
259extern struct list_head ibmphp_slot_head;
260/***********************************************************
261* FUNCTION PROTOTYPES *
262***********************************************************/
263
264void ibmphp_free_ebda_hpc_queue(void);
265int ibmphp_access_ebda(void);
266struct slot *ibmphp_get_slot_from_physical_num(u8);
267int ibmphp_get_total_hp_slots(void);
268void ibmphp_free_ibm_slot(struct slot *);
269void ibmphp_free_bus_info_queue(void);
270void ibmphp_free_ebda_pci_rsrc_queue(void);
271struct bus_info *ibmphp_find_same_bus_num(u32);
272int ibmphp_get_bus_index(u8);
273u16 ibmphp_get_total_controllers(void);
274int ibmphp_register_pci(void);
275
276/* passed parameters */
277#define MEM 0
278#define IO 1
279#define PFMEM 2
280
281/* bit masks */
282#define RESTYPE 0x03
283#define IOMASK 0x00 /* will need to take its complement */
284#define MMASK 0x01
285#define PFMASK 0x03
286#define PCIDEVMASK 0x10 /* we should always have PCI devices */
287#define PRIMARYBUSMASK 0x20
288
289/* pci specific defines */
290#define PCI_VENDOR_ID_NOTVALID 0xFFFF
291#define PCI_HEADER_TYPE_MULTIDEVICE 0x80
292#define PCI_HEADER_TYPE_MULTIBRIDGE 0x81
293
294#define LATENCY 0x64
295#define CACHE 64
296#define DEVICEENABLE 0x015F /* CPQ has 0x0157 */
297
298#define IOBRIDGE 0x1000 /* 4k */
299#define MEMBRIDGE 0x100000 /* 1M */
300
301/* irqs */
302#define SCSI_IRQ 0x09
303#define LAN_IRQ 0x0A
304#define OTHER_IRQ 0x0B
305
306/* Data Structures */
307
308/* type is of the form x x xx xx
309 * | | | |_ 00 - I/O, 01 - Memory, 11 - PFMemory
310 * | | - 00 - No Restrictions, 01 - Avoid VGA, 10 - Avoid
311 * | | VGA and their aliases, 11 - Avoid ISA
312 * | - 1 - PCI device, 0 - non pci device
313 * - 1 - Primary PCI Bus Information (0 if Normal device)
314 * the IO restrictions [2:3] are only for primary buses
315 */
316
317
318/* we need this struct because there could be several resource blocks
319 * allocated per primary bus in the EBDA
320 */
321struct range_node {
322 int rangeno;
323 u32 start;
324 u32 end;
325 struct range_node *next;
326};
327
328struct bus_node {
329 u8 busno;
330 int noIORanges;
331 struct range_node *rangeIO;
332 int noMemRanges;
333 struct range_node *rangeMem;
334 int noPFMemRanges;
335 struct range_node *rangePFMem;
336 int needIOUpdate;
337 int needMemUpdate;
338 int needPFMemUpdate;
339 struct resource_node *firstIO; /* first IO resource on the Bus */
340 struct resource_node *firstMem; /* first memory resource on the Bus */
341 struct resource_node *firstPFMem; /* first prefetchable memory resource on the Bus */
342 struct resource_node *firstPFMemFromMem; /* when run out of pfmem available, taking from Mem */
343 struct list_head bus_list;
344};
345
346struct resource_node {
347 int rangeno;
348 u8 busno;
349 u8 devfunc;
350 u32 start;
351 u32 end;
352 u32 len;
353 int type; /* MEM, IO, PFMEM */
354 u8 fromMem; /* this is to indicate that the range is from
355 * from the Memory bucket rather than from PFMem */
356 struct resource_node *next;
357 struct resource_node *nextRange; /* for the other mem range on bus */
358};
359
360struct res_needed {
361 u32 mem;
362 u32 pfmem;
363 u32 io;
364 u8 not_correct; /* needed for return */
365 int devices[32]; /* for device numbers behind this bridge */
366};
367
368/* functions */
369
370int ibmphp_rsrc_init(void);
371int ibmphp_add_resource(struct resource_node *);
372int ibmphp_remove_resource(struct resource_node *);
373int ibmphp_find_resource(struct bus_node *, u32, struct resource_node **, int);
374int ibmphp_check_resource(struct resource_node *, u8);
375int ibmphp_remove_bus(struct bus_node *, u8);
376void ibmphp_free_resources(void);
377int ibmphp_add_pfmem_from_mem(struct resource_node *);
378struct bus_node *ibmphp_find_res_bus(u8);
379void ibmphp_print_test(void); /* for debugging purposes */
380
381int ibmphp_hpc_readslot(struct slot *, u8, u8 *);
382int ibmphp_hpc_writeslot(struct slot *, u8);
383void ibmphp_lock_operations(void);
384void ibmphp_unlock_operations(void);
385int ibmphp_hpc_start_poll_thread(void);
386void ibmphp_hpc_stop_poll_thread(void);
387
388//----------------------------------------------------------------------------
389
390
391//----------------------------------------------------------------------------
392// HPC return codes
393//----------------------------------------------------------------------------
394#define HPC_ERROR 0xFF
395
396//-----------------------------------------------------------------------------
397// BUS INFO
398//-----------------------------------------------------------------------------
399#define BUS_SPEED 0x30
400#define BUS_MODE 0x40
401#define BUS_MODE_PCIX 0x01
402#define BUS_MODE_PCI 0x00
403#define BUS_SPEED_2 0x20
404#define BUS_SPEED_1 0x10
405#define BUS_SPEED_33 0x00
406#define BUS_SPEED_66 0x01
407#define BUS_SPEED_100 0x02
408#define BUS_SPEED_133 0x03
409#define BUS_SPEED_66PCIX 0x04
410#define BUS_SPEED_66UNKNOWN 0x05
411#define BUS_STATUS_AVAILABLE 0x01
412#define BUS_CONTROL_AVAILABLE 0x02
413#define SLOT_LATCH_REGS_SUPPORTED 0x10
414
415#define PRGM_MODEL_REV_LEVEL 0xF0
416#define MAX_ADAPTER_NONE 0x09
417
418//----------------------------------------------------------------------------
419// HPC 'write' operations/commands
420//----------------------------------------------------------------------------
421// Command Code State Write to reg
422// Machine at index
423//------------------------- ---- ------- ------------
424#define HPC_CTLR_ENABLEIRQ 0x00 // N 15
425#define HPC_CTLR_DISABLEIRQ 0x01 // N 15
426#define HPC_SLOT_OFF 0x02 // Y 0-14
427#define HPC_SLOT_ON 0x03 // Y 0-14
428#define HPC_SLOT_ATTNOFF 0x04 // N 0-14
429#define HPC_SLOT_ATTNON 0x05 // N 0-14
430#define HPC_CTLR_CLEARIRQ 0x06 // N 15
431#define HPC_CTLR_RESET 0x07 // Y 15
432#define HPC_CTLR_IRQSTEER 0x08 // N 15
433#define HPC_BUS_33CONVMODE 0x09 // Y 31-34
434#define HPC_BUS_66CONVMODE 0x0A // Y 31-34
435#define HPC_BUS_66PCIXMODE 0x0B // Y 31-34
436#define HPC_BUS_100PCIXMODE 0x0C // Y 31-34
437#define HPC_BUS_133PCIXMODE 0x0D // Y 31-34
438#define HPC_ALLSLOT_OFF 0x11 // Y 15
439#define HPC_ALLSLOT_ON 0x12 // Y 15
440#define HPC_SLOT_BLINKLED 0x13 // N 0-14
441
442//----------------------------------------------------------------------------
443// read commands
444//----------------------------------------------------------------------------
445#define READ_SLOTSTATUS 0x01
446#define READ_EXTSLOTSTATUS 0x02
447#define READ_BUSSTATUS 0x03
448#define READ_CTLRSTATUS 0x04
449#define READ_ALLSTAT 0x05
450#define READ_ALLSLOT 0x06
451#define READ_SLOTLATCHLOWREG 0x07
452#define READ_REVLEVEL 0x08
453#define READ_HPCOPTIONS 0x09
454//----------------------------------------------------------------------------
455// slot status
456//----------------------------------------------------------------------------
457#define HPC_SLOT_POWER 0x01
458#define HPC_SLOT_CONNECT 0x02
459#define HPC_SLOT_ATTN 0x04
460#define HPC_SLOT_PRSNT2 0x08
461#define HPC_SLOT_PRSNT1 0x10
462#define HPC_SLOT_PWRGD 0x20
463#define HPC_SLOT_BUS_SPEED 0x40
464#define HPC_SLOT_LATCH 0x80
465
466//----------------------------------------------------------------------------
467// HPC_SLOT_POWER status return codes
468//----------------------------------------------------------------------------
469#define HPC_SLOT_POWER_OFF 0x00
470#define HPC_SLOT_POWER_ON 0x01
471
472//----------------------------------------------------------------------------
473// HPC_SLOT_CONNECT status return codes
474//----------------------------------------------------------------------------
475#define HPC_SLOT_CONNECTED 0x00
476#define HPC_SLOT_DISCONNECTED 0x01
477
478//----------------------------------------------------------------------------
479// HPC_SLOT_ATTN status return codes
480//----------------------------------------------------------------------------
481#define HPC_SLOT_ATTN_OFF 0x00
482#define HPC_SLOT_ATTN_ON 0x01
483#define HPC_SLOT_ATTN_BLINK 0x02
484
485//----------------------------------------------------------------------------
486// HPC_SLOT_PRSNT status return codes
487//----------------------------------------------------------------------------
488#define HPC_SLOT_EMPTY 0x00
489#define HPC_SLOT_PRSNT_7 0x01
490#define HPC_SLOT_PRSNT_15 0x02
491#define HPC_SLOT_PRSNT_25 0x03
492
493//----------------------------------------------------------------------------
494// HPC_SLOT_PWRGD status return codes
495//----------------------------------------------------------------------------
496#define HPC_SLOT_PWRGD_FAULT_NONE 0x00
497#define HPC_SLOT_PWRGD_GOOD 0x01
498
499//----------------------------------------------------------------------------
500// HPC_SLOT_BUS_SPEED status return codes
501//----------------------------------------------------------------------------
502#define HPC_SLOT_BUS_SPEED_OK 0x00
503#define HPC_SLOT_BUS_SPEED_MISM 0x01
504
505//----------------------------------------------------------------------------
506// HPC_SLOT_LATCH status return codes
507//----------------------------------------------------------------------------
508#define HPC_SLOT_LATCH_OPEN 0x01 // NOTE : in PCI spec bit off = open
509#define HPC_SLOT_LATCH_CLOSED 0x00 // NOTE : in PCI spec bit on = closed
510
511
512//----------------------------------------------------------------------------
513// extended slot status
514//----------------------------------------------------------------------------
515#define HPC_SLOT_PCIX 0x01
516#define HPC_SLOT_SPEED1 0x02
517#define HPC_SLOT_SPEED2 0x04
518#define HPC_SLOT_BLINK_ATTN 0x08
519#define HPC_SLOT_RSRVD1 0x10
520#define HPC_SLOT_RSRVD2 0x20
521#define HPC_SLOT_BUS_MODE 0x40
522#define HPC_SLOT_RSRVD3 0x80
523
524//----------------------------------------------------------------------------
525// HPC_XSLOT_PCIX_CAP status return codes
526//----------------------------------------------------------------------------
527#define HPC_SLOT_PCIX_NO 0x00
528#define HPC_SLOT_PCIX_YES 0x01
529
530//----------------------------------------------------------------------------
531// HPC_XSLOT_SPEED status return codes
532//----------------------------------------------------------------------------
533#define HPC_SLOT_SPEED_33 0x00
534#define HPC_SLOT_SPEED_66 0x01
535#define HPC_SLOT_SPEED_133 0x02
536
537//----------------------------------------------------------------------------
538// HPC_XSLOT_ATTN_BLINK status return codes
539//----------------------------------------------------------------------------
540#define HPC_SLOT_ATTN_BLINK_OFF 0x00
541#define HPC_SLOT_ATTN_BLINK_ON 0x01
542
543//----------------------------------------------------------------------------
544// HPC_XSLOT_BUS_MODE status return codes
545//----------------------------------------------------------------------------
546#define HPC_SLOT_BUS_MODE_OK 0x00
547#define HPC_SLOT_BUS_MODE_MISM 0x01
548
549//----------------------------------------------------------------------------
550// Controller status
551//----------------------------------------------------------------------------
552#define HPC_CTLR_WORKING 0x01
553#define HPC_CTLR_FINISHED 0x02
554#define HPC_CTLR_RESULT0 0x04
555#define HPC_CTLR_RESULT1 0x08
556#define HPC_CTLR_RESULE2 0x10
557#define HPC_CTLR_RESULT3 0x20
558#define HPC_CTLR_IRQ_ROUTG 0x40
559#define HPC_CTLR_IRQ_PENDG 0x80
560
561//----------------------------------------------------------------------------
562// HPC_CTLR_WORKING status return codes
563//----------------------------------------------------------------------------
564#define HPC_CTLR_WORKING_NO 0x00
565#define HPC_CTLR_WORKING_YES 0x01
566
567//----------------------------------------------------------------------------
568// HPC_CTLR_FINISHED status return codes
569//----------------------------------------------------------------------------
570#define HPC_CTLR_FINISHED_NO 0x00
571#define HPC_CTLR_FINISHED_YES 0x01
572
573//----------------------------------------------------------------------------
574// HPC_CTLR_RESULT status return codes
575//----------------------------------------------------------------------------
576#define HPC_CTLR_RESULT_SUCCESS 0x00
577#define HPC_CTLR_RESULT_FAILED 0x01
578#define HPC_CTLR_RESULT_RSVD 0x02
579#define HPC_CTLR_RESULT_NORESP 0x03
580
581
582//----------------------------------------------------------------------------
583// macro for slot info
584//----------------------------------------------------------------------------
585#define SLOT_POWER(s) ((u8) ((s & HPC_SLOT_POWER) \
586 ? HPC_SLOT_POWER_ON : HPC_SLOT_POWER_OFF))
587
588#define SLOT_CONNECT(s) ((u8) ((s & HPC_SLOT_CONNECT) \
589 ? HPC_SLOT_DISCONNECTED : HPC_SLOT_CONNECTED))
590
591#define SLOT_ATTN(s, es) ((u8) ((es & HPC_SLOT_BLINK_ATTN) \
592 ? HPC_SLOT_ATTN_BLINK \
593 : ((s & HPC_SLOT_ATTN) ? HPC_SLOT_ATTN_ON : HPC_SLOT_ATTN_OFF)))
594
595#define SLOT_PRESENT(s) ((u8) ((s & HPC_SLOT_PRSNT1) \
596 ? ((s & HPC_SLOT_PRSNT2) ? HPC_SLOT_EMPTY : HPC_SLOT_PRSNT_15) \
597 : ((s & HPC_SLOT_PRSNT2) ? HPC_SLOT_PRSNT_25 : HPC_SLOT_PRSNT_7)))
598
599#define SLOT_PWRGD(s) ((u8) ((s & HPC_SLOT_PWRGD) \
600 ? HPC_SLOT_PWRGD_GOOD : HPC_SLOT_PWRGD_FAULT_NONE))
601
602#define SLOT_BUS_SPEED(s) ((u8) ((s & HPC_SLOT_BUS_SPEED) \
603 ? HPC_SLOT_BUS_SPEED_MISM : HPC_SLOT_BUS_SPEED_OK))
604
605#define SLOT_LATCH(s) ((u8) ((s & HPC_SLOT_LATCH) \
606 ? HPC_SLOT_LATCH_CLOSED : HPC_SLOT_LATCH_OPEN))
607
608#define SLOT_PCIX(es) ((u8) ((es & HPC_SLOT_PCIX) \
609 ? HPC_SLOT_PCIX_YES : HPC_SLOT_PCIX_NO))
610
611#define SLOT_SPEED(es) ((u8) ((es & HPC_SLOT_SPEED2) \
612 ? ((es & HPC_SLOT_SPEED1) ? HPC_SLOT_SPEED_133 \
613 : HPC_SLOT_SPEED_66) \
614 : HPC_SLOT_SPEED_33))
615
616#define SLOT_BUS_MODE(es) ((u8) ((es & HPC_SLOT_BUS_MODE) \
617 ? HPC_SLOT_BUS_MODE_MISM : HPC_SLOT_BUS_MODE_OK))
618
619//--------------------------------------------------------------------------
620// macro for bus info
621//---------------------------------------------------------------------------
622#define CURRENT_BUS_SPEED(s) ((u8) (s & BUS_SPEED_2) \
623 ? ((s & BUS_SPEED_1) ? BUS_SPEED_133 : BUS_SPEED_100) \
624 : ((s & BUS_SPEED_1) ? BUS_SPEED_66 : BUS_SPEED_33))
625
626#define CURRENT_BUS_MODE(s) ((u8) (s & BUS_MODE) ? BUS_MODE_PCIX : BUS_MODE_PCI)
627
628#define READ_BUS_STATUS(s) ((u8) (s->options & BUS_STATUS_AVAILABLE))
629
630#define READ_BUS_MODE(s) ((s->revision & PRGM_MODEL_REV_LEVEL) >= 0x20)
631
632#define SET_BUS_STATUS(s) ((u8) (s->options & BUS_CONTROL_AVAILABLE))
633
634#define READ_SLOT_LATCH(s) ((u8) (s->options & SLOT_LATCH_REGS_SUPPORTED))
635
636//----------------------------------------------------------------------------
637// macro for controller info
638//----------------------------------------------------------------------------
639#define CTLR_WORKING(c) ((u8) ((c & HPC_CTLR_WORKING) \
640 ? HPC_CTLR_WORKING_YES : HPC_CTLR_WORKING_NO))
641#define CTLR_FINISHED(c) ((u8) ((c & HPC_CTLR_FINISHED) \
642 ? HPC_CTLR_FINISHED_YES : HPC_CTLR_FINISHED_NO))
643#define CTLR_RESULT(c) ((u8) ((c & HPC_CTLR_RESULT1) \
644 ? ((c & HPC_CTLR_RESULT0) ? HPC_CTLR_RESULT_NORESP \
645 : HPC_CTLR_RESULT_RSVD) \
646 : ((c & HPC_CTLR_RESULT0) ? HPC_CTLR_RESULT_FAILED \
647 : HPC_CTLR_RESULT_SUCCESS)))
648
649// command that affect the state machine of HPC
650#define NEEDTOCHECK_CMDSTATUS(c) ((c == HPC_SLOT_OFF) || \
651 (c == HPC_SLOT_ON) || \
652 (c == HPC_CTLR_RESET) || \
653 (c == HPC_BUS_33CONVMODE) || \
654 (c == HPC_BUS_66CONVMODE) || \
655 (c == HPC_BUS_66PCIXMODE) || \
656 (c == HPC_BUS_100PCIXMODE) || \
657 (c == HPC_BUS_133PCIXMODE) || \
658 (c == HPC_ALLSLOT_OFF) || \
659 (c == HPC_ALLSLOT_ON))
660
661
662/* Core part of the driver */
663
664#define ENABLE 1
665#define DISABLE 0
666
667#define CARD_INFO 0x07
668#define PCIX133 0x07
669#define PCIX66 0x05
670#define PCI66 0x04
671
672extern struct pci_bus *ibmphp_pci_bus;
673
674/* Variables */
675
676struct pci_func {
677 struct pci_dev *dev; /* from the OS */
678 u8 busno;
679 u8 device;
680 u8 function;
681 struct resource_node *io[6];
682 struct resource_node *mem[6];
683 struct resource_node *pfmem[6];
684 struct pci_func *next;
685 int devices[32]; /* for bridge config */
686 u8 irq[4]; /* for interrupt config */
687 u8 bus; /* flag for unconfiguring, to say if PPB */
688};
689
690struct slot {
691 u8 bus;
692 u8 device;
693 u8 number;
694 u8 real_physical_slot_num;
695 u32 capabilities;
696 u8 supported_speed;
697 u8 supported_bus_mode;
698 u8 flag; /* this is for disable slot and polling */
699 u8 ctlr_index;
700 struct hotplug_slot hotplug_slot;
701 struct controller *ctrl;
702 struct pci_func *func;
703 u8 irq[4];
704 int bit_mode; /* 0 = 32, 1 = 64 */
705 struct bus_info *bus_on;
706 struct list_head ibm_slot_list;
707 u8 status;
708 u8 ext_status;
709 u8 busstatus;
710};
711
712struct controller {
713 struct ebda_hpc_slot *slots;
714 struct ebda_hpc_bus *buses;
715 struct pci_dev *ctrl_dev; /* in case where controller is PCI */
716 u8 starting_slot_num; /* starting and ending slot #'s this ctrl controls*/
717 u8 ending_slot_num;
718 u8 revision;
719 u8 options; /* which options HPC supports */
720 u8 status;
721 u8 ctlr_id;
722 u8 slot_count;
723 u8 bus_count;
724 u8 ctlr_relative_id;
725 u32 irq;
726 union {
727 struct isa_ctlr_access isa_ctlr;
728 struct pci_ctlr_access pci_ctlr;
729 struct wpeg_i2c_ctlr_access wpeg_ctlr;
730 } u;
731 u8 ctlr_type;
732 struct list_head ebda_hpc_list;
733};
734
735/* Functions */
736
737int ibmphp_init_devno(struct slot **); /* This function is called from EBDA, so we need it not be static */
738int ibmphp_do_disable_slot(struct slot *slot_cur);
739int ibmphp_update_slot_info(struct slot *); /* This function is called from HPC, so we need it to not be be static */
740int ibmphp_configure_card(struct pci_func *, u8);
741int ibmphp_unconfigure_card(struct slot **, int);
742extern const struct hotplug_slot_ops ibmphp_hotplug_slot_ops;
743
744static inline struct slot *to_slot(struct hotplug_slot *hotplug_slot)
745{
746 return container_of(hotplug_slot, struct slot, hotplug_slot);
747}
748
749#endif //__IBMPHP_H
750