Loading...
1/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) */
2#ifndef LIBFDT_H
3#define LIBFDT_H
4/*
5 * libfdt - Flat Device Tree manipulation
6 * Copyright (C) 2006 David Gibson, IBM Corporation.
7 */
8
9#include "libfdt_env.h"
10#include "fdt.h"
11
12#define FDT_FIRST_SUPPORTED_VERSION 0x02
13#define FDT_LAST_SUPPORTED_VERSION 0x11
14
15/* Error codes: informative error codes */
16#define FDT_ERR_NOTFOUND 1
17 /* FDT_ERR_NOTFOUND: The requested node or property does not exist */
18#define FDT_ERR_EXISTS 2
19 /* FDT_ERR_EXISTS: Attempted to create a node or property which
20 * already exists */
21#define FDT_ERR_NOSPACE 3
22 /* FDT_ERR_NOSPACE: Operation needed to expand the device
23 * tree, but its buffer did not have sufficient space to
24 * contain the expanded tree. Use fdt_open_into() to move the
25 * device tree to a buffer with more space. */
26
27/* Error codes: codes for bad parameters */
28#define FDT_ERR_BADOFFSET 4
29 /* FDT_ERR_BADOFFSET: Function was passed a structure block
30 * offset which is out-of-bounds, or which points to an
31 * unsuitable part of the structure for the operation. */
32#define FDT_ERR_BADPATH 5
33 /* FDT_ERR_BADPATH: Function was passed a badly formatted path
34 * (e.g. missing a leading / for a function which requires an
35 * absolute path) */
36#define FDT_ERR_BADPHANDLE 6
37 /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle.
38 * This can be caused either by an invalid phandle property
39 * length, or the phandle value was either 0 or -1, which are
40 * not permitted. */
41#define FDT_ERR_BADSTATE 7
42 /* FDT_ERR_BADSTATE: Function was passed an incomplete device
43 * tree created by the sequential-write functions, which is
44 * not sufficiently complete for the requested operation. */
45
46/* Error codes: codes for bad device tree blobs */
47#define FDT_ERR_TRUNCATED 8
48 /* FDT_ERR_TRUNCATED: FDT or a sub-block is improperly
49 * terminated (overflows, goes outside allowed bounds, or
50 * isn't properly terminated). */
51#define FDT_ERR_BADMAGIC 9
52 /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a
53 * device tree at all - it is missing the flattened device
54 * tree magic number. */
55#define FDT_ERR_BADVERSION 10
56 /* FDT_ERR_BADVERSION: Given device tree has a version which
57 * can't be handled by the requested operation. For
58 * read-write functions, this may mean that fdt_open_into() is
59 * required to convert the tree to the expected version. */
60#define FDT_ERR_BADSTRUCTURE 11
61 /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt
62 * structure block or other serious error (e.g. misnested
63 * nodes, or subnodes preceding properties). */
64#define FDT_ERR_BADLAYOUT 12
65 /* FDT_ERR_BADLAYOUT: For read-write functions, the given
66 * device tree has it's sub-blocks in an order that the
67 * function can't handle (memory reserve map, then structure,
68 * then strings). Use fdt_open_into() to reorganize the tree
69 * into a form suitable for the read-write operations. */
70
71/* "Can't happen" error indicating a bug in libfdt */
72#define FDT_ERR_INTERNAL 13
73 /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion.
74 * Should never be returned, if it is, it indicates a bug in
75 * libfdt itself. */
76
77/* Errors in device tree content */
78#define FDT_ERR_BADNCELLS 14
79 /* FDT_ERR_BADNCELLS: Device tree has a #address-cells, #size-cells
80 * or similar property with a bad format or value */
81
82#define FDT_ERR_BADVALUE 15
83 /* FDT_ERR_BADVALUE: Device tree has a property with an unexpected
84 * value. For example: a property expected to contain a string list
85 * is not NUL-terminated within the length of its value. */
86
87#define FDT_ERR_BADOVERLAY 16
88 /* FDT_ERR_BADOVERLAY: The device tree overlay, while
89 * correctly structured, cannot be applied due to some
90 * unexpected or missing value, property or node. */
91
92#define FDT_ERR_NOPHANDLES 17
93 /* FDT_ERR_NOPHANDLES: The device tree doesn't have any
94 * phandle available anymore without causing an overflow */
95
96#define FDT_ERR_BADFLAGS 18
97 /* FDT_ERR_BADFLAGS: The function was passed a flags field that
98 * contains invalid flags or an invalid combination of flags. */
99
100#define FDT_ERR_MAX 18
101
102/* constants */
103#define FDT_MAX_PHANDLE 0xfffffffe
104 /* Valid values for phandles range from 1 to 2^32-2. */
105
106/**********************************************************************/
107/* Low-level functions (you probably don't need these) */
108/**********************************************************************/
109
110#ifndef SWIG /* This function is not useful in Python */
111const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int checklen);
112#endif
113static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen)
114{
115 return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen);
116}
117
118uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset);
119
120/*
121 * Alignment helpers:
122 * These helpers access words from a device tree blob. They're
123 * built to work even with unaligned pointers on platforms (ike
124 * ARM) that don't like unaligned loads and stores
125 */
126
127static inline uint32_t fdt32_ld(const fdt32_t *p)
128{
129 const uint8_t *bp = (const uint8_t *)p;
130
131 return ((uint32_t)bp[0] << 24)
132 | ((uint32_t)bp[1] << 16)
133 | ((uint32_t)bp[2] << 8)
134 | bp[3];
135}
136
137static inline void fdt32_st(void *property, uint32_t value)
138{
139 uint8_t *bp = property;
140
141 bp[0] = value >> 24;
142 bp[1] = (value >> 16) & 0xff;
143 bp[2] = (value >> 8) & 0xff;
144 bp[3] = value & 0xff;
145}
146
147static inline uint64_t fdt64_ld(const fdt64_t *p)
148{
149 const uint8_t *bp = (const uint8_t *)p;
150
151 return ((uint64_t)bp[0] << 56)
152 | ((uint64_t)bp[1] << 48)
153 | ((uint64_t)bp[2] << 40)
154 | ((uint64_t)bp[3] << 32)
155 | ((uint64_t)bp[4] << 24)
156 | ((uint64_t)bp[5] << 16)
157 | ((uint64_t)bp[6] << 8)
158 | bp[7];
159}
160
161static inline void fdt64_st(void *property, uint64_t value)
162{
163 uint8_t *bp = property;
164
165 bp[0] = value >> 56;
166 bp[1] = (value >> 48) & 0xff;
167 bp[2] = (value >> 40) & 0xff;
168 bp[3] = (value >> 32) & 0xff;
169 bp[4] = (value >> 24) & 0xff;
170 bp[5] = (value >> 16) & 0xff;
171 bp[6] = (value >> 8) & 0xff;
172 bp[7] = value & 0xff;
173}
174
175/**********************************************************************/
176/* Traversal functions */
177/**********************************************************************/
178
179int fdt_next_node(const void *fdt, int offset, int *depth);
180
181/**
182 * fdt_first_subnode() - get offset of first direct subnode
183 *
184 * @fdt: FDT blob
185 * @offset: Offset of node to check
186 * @return offset of first subnode, or -FDT_ERR_NOTFOUND if there is none
187 */
188int fdt_first_subnode(const void *fdt, int offset);
189
190/**
191 * fdt_next_subnode() - get offset of next direct subnode
192 *
193 * After first calling fdt_first_subnode(), call this function repeatedly to
194 * get direct subnodes of a parent node.
195 *
196 * @fdt: FDT blob
197 * @offset: Offset of previous subnode
198 * @return offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more
199 * subnodes
200 */
201int fdt_next_subnode(const void *fdt, int offset);
202
203/**
204 * fdt_for_each_subnode - iterate over all subnodes of a parent
205 *
206 * @node: child node (int, lvalue)
207 * @fdt: FDT blob (const void *)
208 * @parent: parent node (int)
209 *
210 * This is actually a wrapper around a for loop and would be used like so:
211 *
212 * fdt_for_each_subnode(node, fdt, parent) {
213 * Use node
214 * ...
215 * }
216 *
217 * if ((node < 0) && (node != -FDT_ERR_NOTFOUND)) {
218 * Error handling
219 * }
220 *
221 * Note that this is implemented as a macro and @node is used as
222 * iterator in the loop. The parent variable be constant or even a
223 * literal.
224 *
225 */
226#define fdt_for_each_subnode(node, fdt, parent) \
227 for (node = fdt_first_subnode(fdt, parent); \
228 node >= 0; \
229 node = fdt_next_subnode(fdt, node))
230
231/**********************************************************************/
232/* General functions */
233/**********************************************************************/
234#define fdt_get_header(fdt, field) \
235 (fdt32_ld(&((const struct fdt_header *)(fdt))->field))
236#define fdt_magic(fdt) (fdt_get_header(fdt, magic))
237#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize))
238#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct))
239#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings))
240#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap))
241#define fdt_version(fdt) (fdt_get_header(fdt, version))
242#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version))
243#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys))
244#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings))
245#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct))
246
247#define fdt_set_hdr_(name) \
248 static inline void fdt_set_##name(void *fdt, uint32_t val) \
249 { \
250 struct fdt_header *fdth = (struct fdt_header *)fdt; \
251 fdth->name = cpu_to_fdt32(val); \
252 }
253fdt_set_hdr_(magic);
254fdt_set_hdr_(totalsize);
255fdt_set_hdr_(off_dt_struct);
256fdt_set_hdr_(off_dt_strings);
257fdt_set_hdr_(off_mem_rsvmap);
258fdt_set_hdr_(version);
259fdt_set_hdr_(last_comp_version);
260fdt_set_hdr_(boot_cpuid_phys);
261fdt_set_hdr_(size_dt_strings);
262fdt_set_hdr_(size_dt_struct);
263#undef fdt_set_hdr_
264
265/**
266 * fdt_header_size - return the size of the tree's header
267 * @fdt: pointer to a flattened device tree
268 */
269size_t fdt_header_size_(uint32_t version);
270static inline size_t fdt_header_size(const void *fdt)
271{
272 return fdt_header_size_(fdt_version(fdt));
273}
274
275/**
276 * fdt_check_header - sanity check a device tree header
277
278 * @fdt: pointer to data which might be a flattened device tree
279 *
280 * fdt_check_header() checks that the given buffer contains what
281 * appears to be a flattened device tree, and that the header contains
282 * valid information (to the extent that can be determined from the
283 * header alone).
284 *
285 * returns:
286 * 0, if the buffer appears to contain a valid device tree
287 * -FDT_ERR_BADMAGIC,
288 * -FDT_ERR_BADVERSION,
289 * -FDT_ERR_BADSTATE,
290 * -FDT_ERR_TRUNCATED, standard meanings, as above
291 */
292int fdt_check_header(const void *fdt);
293
294/**
295 * fdt_move - move a device tree around in memory
296 * @fdt: pointer to the device tree to move
297 * @buf: pointer to memory where the device is to be moved
298 * @bufsize: size of the memory space at buf
299 *
300 * fdt_move() relocates, if possible, the device tree blob located at
301 * fdt to the buffer at buf of size bufsize. The buffer may overlap
302 * with the existing device tree blob at fdt. Therefore,
303 * fdt_move(fdt, fdt, fdt_totalsize(fdt))
304 * should always succeed.
305 *
306 * returns:
307 * 0, on success
308 * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree
309 * -FDT_ERR_BADMAGIC,
310 * -FDT_ERR_BADVERSION,
311 * -FDT_ERR_BADSTATE, standard meanings
312 */
313int fdt_move(const void *fdt, void *buf, int bufsize);
314
315/**********************************************************************/
316/* Read-only functions */
317/**********************************************************************/
318
319int fdt_check_full(const void *fdt, size_t bufsize);
320
321/**
322 * fdt_get_string - retrieve a string from the strings block of a device tree
323 * @fdt: pointer to the device tree blob
324 * @stroffset: offset of the string within the strings block (native endian)
325 * @lenp: optional pointer to return the string's length
326 *
327 * fdt_get_string() retrieves a pointer to a single string from the
328 * strings block of the device tree blob at fdt, and optionally also
329 * returns the string's length in *lenp.
330 *
331 * returns:
332 * a pointer to the string, on success
333 * NULL, if stroffset is out of bounds, or doesn't point to a valid string
334 */
335const char *fdt_get_string(const void *fdt, int stroffset, int *lenp);
336
337/**
338 * fdt_string - retrieve a string from the strings block of a device tree
339 * @fdt: pointer to the device tree blob
340 * @stroffset: offset of the string within the strings block (native endian)
341 *
342 * fdt_string() retrieves a pointer to a single string from the
343 * strings block of the device tree blob at fdt.
344 *
345 * returns:
346 * a pointer to the string, on success
347 * NULL, if stroffset is out of bounds, or doesn't point to a valid string
348 */
349const char *fdt_string(const void *fdt, int stroffset);
350
351/**
352 * fdt_find_max_phandle - find and return the highest phandle in a tree
353 * @fdt: pointer to the device tree blob
354 * @phandle: return location for the highest phandle value found in the tree
355 *
356 * fdt_find_max_phandle() finds the highest phandle value in the given device
357 * tree. The value returned in @phandle is only valid if the function returns
358 * success.
359 *
360 * returns:
361 * 0 on success or a negative error code on failure
362 */
363int fdt_find_max_phandle(const void *fdt, uint32_t *phandle);
364
365/**
366 * fdt_get_max_phandle - retrieves the highest phandle in a tree
367 * @fdt: pointer to the device tree blob
368 *
369 * fdt_get_max_phandle retrieves the highest phandle in the given
370 * device tree. This will ignore badly formatted phandles, or phandles
371 * with a value of 0 or -1.
372 *
373 * This function is deprecated in favour of fdt_find_max_phandle().
374 *
375 * returns:
376 * the highest phandle on success
377 * 0, if no phandle was found in the device tree
378 * -1, if an error occurred
379 */
380static inline uint32_t fdt_get_max_phandle(const void *fdt)
381{
382 uint32_t phandle;
383 int err;
384
385 err = fdt_find_max_phandle(fdt, &phandle);
386 if (err < 0)
387 return (uint32_t)-1;
388
389 return phandle;
390}
391
392/**
393 * fdt_generate_phandle - return a new, unused phandle for a device tree blob
394 * @fdt: pointer to the device tree blob
395 * @phandle: return location for the new phandle
396 *
397 * Walks the device tree blob and looks for the highest phandle value. On
398 * success, the new, unused phandle value (one higher than the previously
399 * highest phandle value in the device tree blob) will be returned in the
400 * @phandle parameter.
401 *
402 * Returns:
403 * 0 on success or a negative error-code on failure
404 */
405int fdt_generate_phandle(const void *fdt, uint32_t *phandle);
406
407/**
408 * fdt_num_mem_rsv - retrieve the number of memory reserve map entries
409 * @fdt: pointer to the device tree blob
410 *
411 * Returns the number of entries in the device tree blob's memory
412 * reservation map. This does not include the terminating 0,0 entry
413 * or any other (0,0) entries reserved for expansion.
414 *
415 * returns:
416 * the number of entries
417 */
418int fdt_num_mem_rsv(const void *fdt);
419
420/**
421 * fdt_get_mem_rsv - retrieve one memory reserve map entry
422 * @fdt: pointer to the device tree blob
423 * @address, @size: pointers to 64-bit variables
424 *
425 * On success, *address and *size will contain the address and size of
426 * the n-th reserve map entry from the device tree blob, in
427 * native-endian format.
428 *
429 * returns:
430 * 0, on success
431 * -FDT_ERR_BADMAGIC,
432 * -FDT_ERR_BADVERSION,
433 * -FDT_ERR_BADSTATE, standard meanings
434 */
435int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size);
436
437/**
438 * fdt_subnode_offset_namelen - find a subnode based on substring
439 * @fdt: pointer to the device tree blob
440 * @parentoffset: structure block offset of a node
441 * @name: name of the subnode to locate
442 * @namelen: number of characters of name to consider
443 *
444 * Identical to fdt_subnode_offset(), but only examine the first
445 * namelen characters of name for matching the subnode name. This is
446 * useful for finding subnodes based on a portion of a larger string,
447 * such as a full path.
448 */
449#ifndef SWIG /* Not available in Python */
450int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
451 const char *name, int namelen);
452#endif
453/**
454 * fdt_subnode_offset - find a subnode of a given node
455 * @fdt: pointer to the device tree blob
456 * @parentoffset: structure block offset of a node
457 * @name: name of the subnode to locate
458 *
459 * fdt_subnode_offset() finds a subnode of the node at structure block
460 * offset parentoffset with the given name. name may include a unit
461 * address, in which case fdt_subnode_offset() will find the subnode
462 * with that unit address, or the unit address may be omitted, in
463 * which case fdt_subnode_offset() will find an arbitrary subnode
464 * whose name excluding unit address matches the given name.
465 *
466 * returns:
467 * structure block offset of the requested subnode (>=0), on success
468 * -FDT_ERR_NOTFOUND, if the requested subnode does not exist
469 * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE
470 * tag
471 * -FDT_ERR_BADMAGIC,
472 * -FDT_ERR_BADVERSION,
473 * -FDT_ERR_BADSTATE,
474 * -FDT_ERR_BADSTRUCTURE,
475 * -FDT_ERR_TRUNCATED, standard meanings.
476 */
477int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name);
478
479/**
480 * fdt_path_offset_namelen - find a tree node by its full path
481 * @fdt: pointer to the device tree blob
482 * @path: full path of the node to locate
483 * @namelen: number of characters of path to consider
484 *
485 * Identical to fdt_path_offset(), but only consider the first namelen
486 * characters of path as the path name.
487 */
488#ifndef SWIG /* Not available in Python */
489int fdt_path_offset_namelen(const void *fdt, const char *path, int namelen);
490#endif
491
492/**
493 * fdt_path_offset - find a tree node by its full path
494 * @fdt: pointer to the device tree blob
495 * @path: full path of the node to locate
496 *
497 * fdt_path_offset() finds a node of a given path in the device tree.
498 * Each path component may omit the unit address portion, but the
499 * results of this are undefined if any such path component is
500 * ambiguous (that is if there are multiple nodes at the relevant
501 * level matching the given component, differentiated only by unit
502 * address).
503 *
504 * returns:
505 * structure block offset of the node with the requested path (>=0), on
506 * success
507 * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid
508 * -FDT_ERR_NOTFOUND, if the requested node does not exist
509 * -FDT_ERR_BADMAGIC,
510 * -FDT_ERR_BADVERSION,
511 * -FDT_ERR_BADSTATE,
512 * -FDT_ERR_BADSTRUCTURE,
513 * -FDT_ERR_TRUNCATED, standard meanings.
514 */
515int fdt_path_offset(const void *fdt, const char *path);
516
517/**
518 * fdt_get_name - retrieve the name of a given node
519 * @fdt: pointer to the device tree blob
520 * @nodeoffset: structure block offset of the starting node
521 * @lenp: pointer to an integer variable (will be overwritten) or NULL
522 *
523 * fdt_get_name() retrieves the name (including unit address) of the
524 * device tree node at structure block offset nodeoffset. If lenp is
525 * non-NULL, the length of this name is also returned, in the integer
526 * pointed to by lenp.
527 *
528 * returns:
529 * pointer to the node's name, on success
530 * If lenp is non-NULL, *lenp contains the length of that name
531 * (>=0)
532 * NULL, on error
533 * if lenp is non-NULL *lenp contains an error code (<0):
534 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE
535 * tag
536 * -FDT_ERR_BADMAGIC,
537 * -FDT_ERR_BADVERSION,
538 * -FDT_ERR_BADSTATE, standard meanings
539 */
540const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp);
541
542/**
543 * fdt_first_property_offset - find the offset of a node's first property
544 * @fdt: pointer to the device tree blob
545 * @nodeoffset: structure block offset of a node
546 *
547 * fdt_first_property_offset() finds the first property of the node at
548 * the given structure block offset.
549 *
550 * returns:
551 * structure block offset of the property (>=0), on success
552 * -FDT_ERR_NOTFOUND, if the requested node has no properties
553 * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_BEGIN_NODE tag
554 * -FDT_ERR_BADMAGIC,
555 * -FDT_ERR_BADVERSION,
556 * -FDT_ERR_BADSTATE,
557 * -FDT_ERR_BADSTRUCTURE,
558 * -FDT_ERR_TRUNCATED, standard meanings.
559 */
560int fdt_first_property_offset(const void *fdt, int nodeoffset);
561
562/**
563 * fdt_next_property_offset - step through a node's properties
564 * @fdt: pointer to the device tree blob
565 * @offset: structure block offset of a property
566 *
567 * fdt_next_property_offset() finds the property immediately after the
568 * one at the given structure block offset. This will be a property
569 * of the same node as the given property.
570 *
571 * returns:
572 * structure block offset of the next property (>=0), on success
573 * -FDT_ERR_NOTFOUND, if the given property is the last in its node
574 * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_PROP tag
575 * -FDT_ERR_BADMAGIC,
576 * -FDT_ERR_BADVERSION,
577 * -FDT_ERR_BADSTATE,
578 * -FDT_ERR_BADSTRUCTURE,
579 * -FDT_ERR_TRUNCATED, standard meanings.
580 */
581int fdt_next_property_offset(const void *fdt, int offset);
582
583/**
584 * fdt_for_each_property_offset - iterate over all properties of a node
585 *
586 * @property_offset: property offset (int, lvalue)
587 * @fdt: FDT blob (const void *)
588 * @node: node offset (int)
589 *
590 * This is actually a wrapper around a for loop and would be used like so:
591 *
592 * fdt_for_each_property_offset(property, fdt, node) {
593 * Use property
594 * ...
595 * }
596 *
597 * if ((property < 0) && (property != -FDT_ERR_NOTFOUND)) {
598 * Error handling
599 * }
600 *
601 * Note that this is implemented as a macro and property is used as
602 * iterator in the loop. The node variable can be constant or even a
603 * literal.
604 */
605#define fdt_for_each_property_offset(property, fdt, node) \
606 for (property = fdt_first_property_offset(fdt, node); \
607 property >= 0; \
608 property = fdt_next_property_offset(fdt, property))
609
610/**
611 * fdt_get_property_by_offset - retrieve the property at a given offset
612 * @fdt: pointer to the device tree blob
613 * @offset: offset of the property to retrieve
614 * @lenp: pointer to an integer variable (will be overwritten) or NULL
615 *
616 * fdt_get_property_by_offset() retrieves a pointer to the
617 * fdt_property structure within the device tree blob at the given
618 * offset. If lenp is non-NULL, the length of the property value is
619 * also returned, in the integer pointed to by lenp.
620 *
621 * Note that this code only works on device tree versions >= 16. fdt_getprop()
622 * works on all versions.
623 *
624 * returns:
625 * pointer to the structure representing the property
626 * if lenp is non-NULL, *lenp contains the length of the property
627 * value (>=0)
628 * NULL, on error
629 * if lenp is non-NULL, *lenp contains an error code (<0):
630 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag
631 * -FDT_ERR_BADMAGIC,
632 * -FDT_ERR_BADVERSION,
633 * -FDT_ERR_BADSTATE,
634 * -FDT_ERR_BADSTRUCTURE,
635 * -FDT_ERR_TRUNCATED, standard meanings
636 */
637const struct fdt_property *fdt_get_property_by_offset(const void *fdt,
638 int offset,
639 int *lenp);
640
641/**
642 * fdt_get_property_namelen - find a property based on substring
643 * @fdt: pointer to the device tree blob
644 * @nodeoffset: offset of the node whose property to find
645 * @name: name of the property to find
646 * @namelen: number of characters of name to consider
647 * @lenp: pointer to an integer variable (will be overwritten) or NULL
648 *
649 * Identical to fdt_get_property(), but only examine the first namelen
650 * characters of name for matching the property name.
651 */
652#ifndef SWIG /* Not available in Python */
653const struct fdt_property *fdt_get_property_namelen(const void *fdt,
654 int nodeoffset,
655 const char *name,
656 int namelen, int *lenp);
657#endif
658
659/**
660 * fdt_get_property - find a given property in a given node
661 * @fdt: pointer to the device tree blob
662 * @nodeoffset: offset of the node whose property to find
663 * @name: name of the property to find
664 * @lenp: pointer to an integer variable (will be overwritten) or NULL
665 *
666 * fdt_get_property() retrieves a pointer to the fdt_property
667 * structure within the device tree blob corresponding to the property
668 * named 'name' of the node at offset nodeoffset. If lenp is
669 * non-NULL, the length of the property value is also returned, in the
670 * integer pointed to by lenp.
671 *
672 * returns:
673 * pointer to the structure representing the property
674 * if lenp is non-NULL, *lenp contains the length of the property
675 * value (>=0)
676 * NULL, on error
677 * if lenp is non-NULL, *lenp contains an error code (<0):
678 * -FDT_ERR_NOTFOUND, node does not have named property
679 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE
680 * tag
681 * -FDT_ERR_BADMAGIC,
682 * -FDT_ERR_BADVERSION,
683 * -FDT_ERR_BADSTATE,
684 * -FDT_ERR_BADSTRUCTURE,
685 * -FDT_ERR_TRUNCATED, standard meanings
686 */
687const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset,
688 const char *name, int *lenp);
689static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset,
690 const char *name,
691 int *lenp)
692{
693 return (struct fdt_property *)(uintptr_t)
694 fdt_get_property(fdt, nodeoffset, name, lenp);
695}
696
697/**
698 * fdt_getprop_by_offset - retrieve the value of a property at a given offset
699 * @fdt: pointer to the device tree blob
700 * @offset: offset of the property to read
701 * @namep: pointer to a string variable (will be overwritten) or NULL
702 * @lenp: pointer to an integer variable (will be overwritten) or NULL
703 *
704 * fdt_getprop_by_offset() retrieves a pointer to the value of the
705 * property at structure block offset 'offset' (this will be a pointer
706 * to within the device blob itself, not a copy of the value). If
707 * lenp is non-NULL, the length of the property value is also
708 * returned, in the integer pointed to by lenp. If namep is non-NULL,
709 * the property's namne will also be returned in the char * pointed to
710 * by namep (this will be a pointer to within the device tree's string
711 * block, not a new copy of the name).
712 *
713 * returns:
714 * pointer to the property's value
715 * if lenp is non-NULL, *lenp contains the length of the property
716 * value (>=0)
717 * if namep is non-NULL *namep contiains a pointer to the property
718 * name.
719 * NULL, on error
720 * if lenp is non-NULL, *lenp contains an error code (<0):
721 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag
722 * -FDT_ERR_BADMAGIC,
723 * -FDT_ERR_BADVERSION,
724 * -FDT_ERR_BADSTATE,
725 * -FDT_ERR_BADSTRUCTURE,
726 * -FDT_ERR_TRUNCATED, standard meanings
727 */
728#ifndef SWIG /* This function is not useful in Python */
729const void *fdt_getprop_by_offset(const void *fdt, int offset,
730 const char **namep, int *lenp);
731#endif
732
733/**
734 * fdt_getprop_namelen - get property value based on substring
735 * @fdt: pointer to the device tree blob
736 * @nodeoffset: offset of the node whose property to find
737 * @name: name of the property to find
738 * @namelen: number of characters of name to consider
739 * @lenp: pointer to an integer variable (will be overwritten) or NULL
740 *
741 * Identical to fdt_getprop(), but only examine the first namelen
742 * characters of name for matching the property name.
743 */
744#ifndef SWIG /* Not available in Python */
745const void *fdt_getprop_namelen(const void *fdt, int nodeoffset,
746 const char *name, int namelen, int *lenp);
747static inline void *fdt_getprop_namelen_w(void *fdt, int nodeoffset,
748 const char *name, int namelen,
749 int *lenp)
750{
751 return (void *)(uintptr_t)fdt_getprop_namelen(fdt, nodeoffset, name,
752 namelen, lenp);
753}
754#endif
755
756/**
757 * fdt_getprop - retrieve the value of a given property
758 * @fdt: pointer to the device tree blob
759 * @nodeoffset: offset of the node whose property to find
760 * @name: name of the property to find
761 * @lenp: pointer to an integer variable (will be overwritten) or NULL
762 *
763 * fdt_getprop() retrieves a pointer to the value of the property
764 * named 'name' of the node at offset nodeoffset (this will be a
765 * pointer to within the device blob itself, not a copy of the value).
766 * If lenp is non-NULL, the length of the property value is also
767 * returned, in the integer pointed to by lenp.
768 *
769 * returns:
770 * pointer to the property's value
771 * if lenp is non-NULL, *lenp contains the length of the property
772 * value (>=0)
773 * NULL, on error
774 * if lenp is non-NULL, *lenp contains an error code (<0):
775 * -FDT_ERR_NOTFOUND, node does not have named property
776 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE
777 * tag
778 * -FDT_ERR_BADMAGIC,
779 * -FDT_ERR_BADVERSION,
780 * -FDT_ERR_BADSTATE,
781 * -FDT_ERR_BADSTRUCTURE,
782 * -FDT_ERR_TRUNCATED, standard meanings
783 */
784const void *fdt_getprop(const void *fdt, int nodeoffset,
785 const char *name, int *lenp);
786static inline void *fdt_getprop_w(void *fdt, int nodeoffset,
787 const char *name, int *lenp)
788{
789 return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp);
790}
791
792/**
793 * fdt_get_phandle - retrieve the phandle of a given node
794 * @fdt: pointer to the device tree blob
795 * @nodeoffset: structure block offset of the node
796 *
797 * fdt_get_phandle() retrieves the phandle of the device tree node at
798 * structure block offset nodeoffset.
799 *
800 * returns:
801 * the phandle of the node at nodeoffset, on success (!= 0, != -1)
802 * 0, if the node has no phandle, or another error occurs
803 */
804uint32_t fdt_get_phandle(const void *fdt, int nodeoffset);
805
806/**
807 * fdt_get_alias_namelen - get alias based on substring
808 * @fdt: pointer to the device tree blob
809 * @name: name of the alias th look up
810 * @namelen: number of characters of name to consider
811 *
812 * Identical to fdt_get_alias(), but only examine the first namelen
813 * characters of name for matching the alias name.
814 */
815#ifndef SWIG /* Not available in Python */
816const char *fdt_get_alias_namelen(const void *fdt,
817 const char *name, int namelen);
818#endif
819
820/**
821 * fdt_get_alias - retrieve the path referenced by a given alias
822 * @fdt: pointer to the device tree blob
823 * @name: name of the alias th look up
824 *
825 * fdt_get_alias() retrieves the value of a given alias. That is, the
826 * value of the property named 'name' in the node /aliases.
827 *
828 * returns:
829 * a pointer to the expansion of the alias named 'name', if it exists
830 * NULL, if the given alias or the /aliases node does not exist
831 */
832const char *fdt_get_alias(const void *fdt, const char *name);
833
834/**
835 * fdt_get_path - determine the full path of a node
836 * @fdt: pointer to the device tree blob
837 * @nodeoffset: offset of the node whose path to find
838 * @buf: character buffer to contain the returned path (will be overwritten)
839 * @buflen: size of the character buffer at buf
840 *
841 * fdt_get_path() computes the full path of the node at offset
842 * nodeoffset, and records that path in the buffer at buf.
843 *
844 * NOTE: This function is expensive, as it must scan the device tree
845 * structure from the start to nodeoffset.
846 *
847 * returns:
848 * 0, on success
849 * buf contains the absolute path of the node at
850 * nodeoffset, as a NUL-terminated string.
851 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
852 * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1)
853 * characters and will not fit in the given buffer.
854 * -FDT_ERR_BADMAGIC,
855 * -FDT_ERR_BADVERSION,
856 * -FDT_ERR_BADSTATE,
857 * -FDT_ERR_BADSTRUCTURE, standard meanings
858 */
859int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen);
860
861/**
862 * fdt_supernode_atdepth_offset - find a specific ancestor of a node
863 * @fdt: pointer to the device tree blob
864 * @nodeoffset: offset of the node whose parent to find
865 * @supernodedepth: depth of the ancestor to find
866 * @nodedepth: pointer to an integer variable (will be overwritten) or NULL
867 *
868 * fdt_supernode_atdepth_offset() finds an ancestor of the given node
869 * at a specific depth from the root (where the root itself has depth
870 * 0, its immediate subnodes depth 1 and so forth). So
871 * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL);
872 * will always return 0, the offset of the root node. If the node at
873 * nodeoffset has depth D, then:
874 * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL);
875 * will return nodeoffset itself.
876 *
877 * NOTE: This function is expensive, as it must scan the device tree
878 * structure from the start to nodeoffset.
879 *
880 * returns:
881 * structure block offset of the node at node offset's ancestor
882 * of depth supernodedepth (>=0), on success
883 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
884 * -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of
885 * nodeoffset
886 * -FDT_ERR_BADMAGIC,
887 * -FDT_ERR_BADVERSION,
888 * -FDT_ERR_BADSTATE,
889 * -FDT_ERR_BADSTRUCTURE, standard meanings
890 */
891int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
892 int supernodedepth, int *nodedepth);
893
894/**
895 * fdt_node_depth - find the depth of a given node
896 * @fdt: pointer to the device tree blob
897 * @nodeoffset: offset of the node whose parent to find
898 *
899 * fdt_node_depth() finds the depth of a given node. The root node
900 * has depth 0, its immediate subnodes depth 1 and so forth.
901 *
902 * NOTE: This function is expensive, as it must scan the device tree
903 * structure from the start to nodeoffset.
904 *
905 * returns:
906 * depth of the node at nodeoffset (>=0), on success
907 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
908 * -FDT_ERR_BADMAGIC,
909 * -FDT_ERR_BADVERSION,
910 * -FDT_ERR_BADSTATE,
911 * -FDT_ERR_BADSTRUCTURE, standard meanings
912 */
913int fdt_node_depth(const void *fdt, int nodeoffset);
914
915/**
916 * fdt_parent_offset - find the parent of a given node
917 * @fdt: pointer to the device tree blob
918 * @nodeoffset: offset of the node whose parent to find
919 *
920 * fdt_parent_offset() locates the parent node of a given node (that
921 * is, it finds the offset of the node which contains the node at
922 * nodeoffset as a subnode).
923 *
924 * NOTE: This function is expensive, as it must scan the device tree
925 * structure from the start to nodeoffset, *twice*.
926 *
927 * returns:
928 * structure block offset of the parent of the node at nodeoffset
929 * (>=0), on success
930 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
931 * -FDT_ERR_BADMAGIC,
932 * -FDT_ERR_BADVERSION,
933 * -FDT_ERR_BADSTATE,
934 * -FDT_ERR_BADSTRUCTURE, standard meanings
935 */
936int fdt_parent_offset(const void *fdt, int nodeoffset);
937
938/**
939 * fdt_node_offset_by_prop_value - find nodes with a given property value
940 * @fdt: pointer to the device tree blob
941 * @startoffset: only find nodes after this offset
942 * @propname: property name to check
943 * @propval: property value to search for
944 * @proplen: length of the value in propval
945 *
946 * fdt_node_offset_by_prop_value() returns the offset of the first
947 * node after startoffset, which has a property named propname whose
948 * value is of length proplen and has value equal to propval; or if
949 * startoffset is -1, the very first such node in the tree.
950 *
951 * To iterate through all nodes matching the criterion, the following
952 * idiom can be used:
953 * offset = fdt_node_offset_by_prop_value(fdt, -1, propname,
954 * propval, proplen);
955 * while (offset != -FDT_ERR_NOTFOUND) {
956 * // other code here
957 * offset = fdt_node_offset_by_prop_value(fdt, offset, propname,
958 * propval, proplen);
959 * }
960 *
961 * Note the -1 in the first call to the function, if 0 is used here
962 * instead, the function will never locate the root node, even if it
963 * matches the criterion.
964 *
965 * returns:
966 * structure block offset of the located node (>= 0, >startoffset),
967 * on success
968 * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the
969 * tree after startoffset
970 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
971 * -FDT_ERR_BADMAGIC,
972 * -FDT_ERR_BADVERSION,
973 * -FDT_ERR_BADSTATE,
974 * -FDT_ERR_BADSTRUCTURE, standard meanings
975 */
976int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
977 const char *propname,
978 const void *propval, int proplen);
979
980/**
981 * fdt_node_offset_by_phandle - find the node with a given phandle
982 * @fdt: pointer to the device tree blob
983 * @phandle: phandle value
984 *
985 * fdt_node_offset_by_phandle() returns the offset of the node
986 * which has the given phandle value. If there is more than one node
987 * in the tree with the given phandle (an invalid tree), results are
988 * undefined.
989 *
990 * returns:
991 * structure block offset of the located node (>= 0), on success
992 * -FDT_ERR_NOTFOUND, no node with that phandle exists
993 * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1)
994 * -FDT_ERR_BADMAGIC,
995 * -FDT_ERR_BADVERSION,
996 * -FDT_ERR_BADSTATE,
997 * -FDT_ERR_BADSTRUCTURE, standard meanings
998 */
999int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle);
1000
1001/**
1002 * fdt_node_check_compatible: check a node's compatible property
1003 * @fdt: pointer to the device tree blob
1004 * @nodeoffset: offset of a tree node
1005 * @compatible: string to match against
1006 *
1007 *
1008 * fdt_node_check_compatible() returns 0 if the given node contains a
1009 * 'compatible' property with the given string as one of its elements,
1010 * it returns non-zero otherwise, or on error.
1011 *
1012 * returns:
1013 * 0, if the node has a 'compatible' property listing the given string
1014 * 1, if the node has a 'compatible' property, but it does not list
1015 * the given string
1016 * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property
1017 * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag
1018 * -FDT_ERR_BADMAGIC,
1019 * -FDT_ERR_BADVERSION,
1020 * -FDT_ERR_BADSTATE,
1021 * -FDT_ERR_BADSTRUCTURE, standard meanings
1022 */
1023int fdt_node_check_compatible(const void *fdt, int nodeoffset,
1024 const char *compatible);
1025
1026/**
1027 * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value
1028 * @fdt: pointer to the device tree blob
1029 * @startoffset: only find nodes after this offset
1030 * @compatible: 'compatible' string to match against
1031 *
1032 * fdt_node_offset_by_compatible() returns the offset of the first
1033 * node after startoffset, which has a 'compatible' property which
1034 * lists the given compatible string; or if startoffset is -1, the
1035 * very first such node in the tree.
1036 *
1037 * To iterate through all nodes matching the criterion, the following
1038 * idiom can be used:
1039 * offset = fdt_node_offset_by_compatible(fdt, -1, compatible);
1040 * while (offset != -FDT_ERR_NOTFOUND) {
1041 * // other code here
1042 * offset = fdt_node_offset_by_compatible(fdt, offset, compatible);
1043 * }
1044 *
1045 * Note the -1 in the first call to the function, if 0 is used here
1046 * instead, the function will never locate the root node, even if it
1047 * matches the criterion.
1048 *
1049 * returns:
1050 * structure block offset of the located node (>= 0, >startoffset),
1051 * on success
1052 * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the
1053 * tree after startoffset
1054 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
1055 * -FDT_ERR_BADMAGIC,
1056 * -FDT_ERR_BADVERSION,
1057 * -FDT_ERR_BADSTATE,
1058 * -FDT_ERR_BADSTRUCTURE, standard meanings
1059 */
1060int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
1061 const char *compatible);
1062
1063/**
1064 * fdt_stringlist_contains - check a string list property for a string
1065 * @strlist: Property containing a list of strings to check
1066 * @listlen: Length of property
1067 * @str: String to search for
1068 *
1069 * This is a utility function provided for convenience. The list contains
1070 * one or more strings, each terminated by \0, as is found in a device tree
1071 * "compatible" property.
1072 *
1073 * @return: 1 if the string is found in the list, 0 not found, or invalid list
1074 */
1075int fdt_stringlist_contains(const char *strlist, int listlen, const char *str);
1076
1077/**
1078 * fdt_stringlist_count - count the number of strings in a string list
1079 * @fdt: pointer to the device tree blob
1080 * @nodeoffset: offset of a tree node
1081 * @property: name of the property containing the string list
1082 * @return:
1083 * the number of strings in the given property
1084 * -FDT_ERR_BADVALUE if the property value is not NUL-terminated
1085 * -FDT_ERR_NOTFOUND if the property does not exist
1086 */
1087int fdt_stringlist_count(const void *fdt, int nodeoffset, const char *property);
1088
1089/**
1090 * fdt_stringlist_search - find a string in a string list and return its index
1091 * @fdt: pointer to the device tree blob
1092 * @nodeoffset: offset of a tree node
1093 * @property: name of the property containing the string list
1094 * @string: string to look up in the string list
1095 *
1096 * Note that it is possible for this function to succeed on property values
1097 * that are not NUL-terminated. That's because the function will stop after
1098 * finding the first occurrence of @string. This can for example happen with
1099 * small-valued cell properties, such as #address-cells, when searching for
1100 * the empty string.
1101 *
1102 * @return:
1103 * the index of the string in the list of strings
1104 * -FDT_ERR_BADVALUE if the property value is not NUL-terminated
1105 * -FDT_ERR_NOTFOUND if the property does not exist or does not contain
1106 * the given string
1107 */
1108int fdt_stringlist_search(const void *fdt, int nodeoffset, const char *property,
1109 const char *string);
1110
1111/**
1112 * fdt_stringlist_get() - obtain the string at a given index in a string list
1113 * @fdt: pointer to the device tree blob
1114 * @nodeoffset: offset of a tree node
1115 * @property: name of the property containing the string list
1116 * @index: index of the string to return
1117 * @lenp: return location for the string length or an error code on failure
1118 *
1119 * Note that this will successfully extract strings from properties with
1120 * non-NUL-terminated values. For example on small-valued cell properties
1121 * this function will return the empty string.
1122 *
1123 * If non-NULL, the length of the string (on success) or a negative error-code
1124 * (on failure) will be stored in the integer pointer to by lenp.
1125 *
1126 * @return:
1127 * A pointer to the string at the given index in the string list or NULL on
1128 * failure. On success the length of the string will be stored in the memory
1129 * location pointed to by the lenp parameter, if non-NULL. On failure one of
1130 * the following negative error codes will be returned in the lenp parameter
1131 * (if non-NULL):
1132 * -FDT_ERR_BADVALUE if the property value is not NUL-terminated
1133 * -FDT_ERR_NOTFOUND if the property does not exist
1134 */
1135const char *fdt_stringlist_get(const void *fdt, int nodeoffset,
1136 const char *property, int index,
1137 int *lenp);
1138
1139/**********************************************************************/
1140/* Read-only functions (addressing related) */
1141/**********************************************************************/
1142
1143/**
1144 * FDT_MAX_NCELLS - maximum value for #address-cells and #size-cells
1145 *
1146 * This is the maximum value for #address-cells, #size-cells and
1147 * similar properties that will be processed by libfdt. IEE1275
1148 * requires that OF implementations handle values up to 4.
1149 * Implementations may support larger values, but in practice higher
1150 * values aren't used.
1151 */
1152#define FDT_MAX_NCELLS 4
1153
1154/**
1155 * fdt_address_cells - retrieve address size for a bus represented in the tree
1156 * @fdt: pointer to the device tree blob
1157 * @nodeoffset: offset of the node to find the address size for
1158 *
1159 * When the node has a valid #address-cells property, returns its value.
1160 *
1161 * returns:
1162 * 0 <= n < FDT_MAX_NCELLS, on success
1163 * 2, if the node has no #address-cells property
1164 * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid
1165 * #address-cells property
1166 * -FDT_ERR_BADMAGIC,
1167 * -FDT_ERR_BADVERSION,
1168 * -FDT_ERR_BADSTATE,
1169 * -FDT_ERR_BADSTRUCTURE,
1170 * -FDT_ERR_TRUNCATED, standard meanings
1171 */
1172int fdt_address_cells(const void *fdt, int nodeoffset);
1173
1174/**
1175 * fdt_size_cells - retrieve address range size for a bus represented in the
1176 * tree
1177 * @fdt: pointer to the device tree blob
1178 * @nodeoffset: offset of the node to find the address range size for
1179 *
1180 * When the node has a valid #size-cells property, returns its value.
1181 *
1182 * returns:
1183 * 0 <= n < FDT_MAX_NCELLS, on success
1184 * 1, if the node has no #size-cells property
1185 * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid
1186 * #size-cells property
1187 * -FDT_ERR_BADMAGIC,
1188 * -FDT_ERR_BADVERSION,
1189 * -FDT_ERR_BADSTATE,
1190 * -FDT_ERR_BADSTRUCTURE,
1191 * -FDT_ERR_TRUNCATED, standard meanings
1192 */
1193int fdt_size_cells(const void *fdt, int nodeoffset);
1194
1195
1196/**********************************************************************/
1197/* Write-in-place functions */
1198/**********************************************************************/
1199
1200/**
1201 * fdt_setprop_inplace_namelen_partial - change a property's value,
1202 * but not its size
1203 * @fdt: pointer to the device tree blob
1204 * @nodeoffset: offset of the node whose property to change
1205 * @name: name of the property to change
1206 * @namelen: number of characters of name to consider
1207 * @idx: index of the property to change in the array
1208 * @val: pointer to data to replace the property value with
1209 * @len: length of the property value
1210 *
1211 * Identical to fdt_setprop_inplace(), but modifies the given property
1212 * starting from the given index, and using only the first characters
1213 * of the name. It is useful when you want to manipulate only one value of
1214 * an array and you have a string that doesn't end with \0.
1215 */
1216#ifndef SWIG /* Not available in Python */
1217int fdt_setprop_inplace_namelen_partial(void *fdt, int nodeoffset,
1218 const char *name, int namelen,
1219 uint32_t idx, const void *val,
1220 int len);
1221#endif
1222
1223/**
1224 * fdt_setprop_inplace - change a property's value, but not its size
1225 * @fdt: pointer to the device tree blob
1226 * @nodeoffset: offset of the node whose property to change
1227 * @name: name of the property to change
1228 * @val: pointer to data to replace the property value with
1229 * @len: length of the property value
1230 *
1231 * fdt_setprop_inplace() replaces the value of a given property with
1232 * the data in val, of length len. This function cannot change the
1233 * size of a property, and so will only work if len is equal to the
1234 * current length of the property.
1235 *
1236 * This function will alter only the bytes in the blob which contain
1237 * the given property value, and will not alter or move any other part
1238 * of the tree.
1239 *
1240 * returns:
1241 * 0, on success
1242 * -FDT_ERR_NOSPACE, if len is not equal to the property's current length
1243 * -FDT_ERR_NOTFOUND, node does not have the named property
1244 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1245 * -FDT_ERR_BADMAGIC,
1246 * -FDT_ERR_BADVERSION,
1247 * -FDT_ERR_BADSTATE,
1248 * -FDT_ERR_BADSTRUCTURE,
1249 * -FDT_ERR_TRUNCATED, standard meanings
1250 */
1251#ifndef SWIG /* Not available in Python */
1252int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
1253 const void *val, int len);
1254#endif
1255
1256/**
1257 * fdt_setprop_inplace_u32 - change the value of a 32-bit integer property
1258 * @fdt: pointer to the device tree blob
1259 * @nodeoffset: offset of the node whose property to change
1260 * @name: name of the property to change
1261 * @val: 32-bit integer value to replace the property with
1262 *
1263 * fdt_setprop_inplace_u32() replaces the value of a given property
1264 * with the 32-bit integer value in val, converting val to big-endian
1265 * if necessary. This function cannot change the size of a property,
1266 * and so will only work if the property already exists and has length
1267 * 4.
1268 *
1269 * This function will alter only the bytes in the blob which contain
1270 * the given property value, and will not alter or move any other part
1271 * of the tree.
1272 *
1273 * returns:
1274 * 0, on success
1275 * -FDT_ERR_NOSPACE, if the property's length is not equal to 4
1276 * -FDT_ERR_NOTFOUND, node does not have the named property
1277 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1278 * -FDT_ERR_BADMAGIC,
1279 * -FDT_ERR_BADVERSION,
1280 * -FDT_ERR_BADSTATE,
1281 * -FDT_ERR_BADSTRUCTURE,
1282 * -FDT_ERR_TRUNCATED, standard meanings
1283 */
1284static inline int fdt_setprop_inplace_u32(void *fdt, int nodeoffset,
1285 const char *name, uint32_t val)
1286{
1287 fdt32_t tmp = cpu_to_fdt32(val);
1288 return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp));
1289}
1290
1291/**
1292 * fdt_setprop_inplace_u64 - change the value of a 64-bit integer property
1293 * @fdt: pointer to the device tree blob
1294 * @nodeoffset: offset of the node whose property to change
1295 * @name: name of the property to change
1296 * @val: 64-bit integer value to replace the property with
1297 *
1298 * fdt_setprop_inplace_u64() replaces the value of a given property
1299 * with the 64-bit integer value in val, converting val to big-endian
1300 * if necessary. This function cannot change the size of a property,
1301 * and so will only work if the property already exists and has length
1302 * 8.
1303 *
1304 * This function will alter only the bytes in the blob which contain
1305 * the given property value, and will not alter or move any other part
1306 * of the tree.
1307 *
1308 * returns:
1309 * 0, on success
1310 * -FDT_ERR_NOSPACE, if the property's length is not equal to 8
1311 * -FDT_ERR_NOTFOUND, node does not have the named property
1312 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1313 * -FDT_ERR_BADMAGIC,
1314 * -FDT_ERR_BADVERSION,
1315 * -FDT_ERR_BADSTATE,
1316 * -FDT_ERR_BADSTRUCTURE,
1317 * -FDT_ERR_TRUNCATED, standard meanings
1318 */
1319static inline int fdt_setprop_inplace_u64(void *fdt, int nodeoffset,
1320 const char *name, uint64_t val)
1321{
1322 fdt64_t tmp = cpu_to_fdt64(val);
1323 return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp));
1324}
1325
1326/**
1327 * fdt_setprop_inplace_cell - change the value of a single-cell property
1328 *
1329 * This is an alternative name for fdt_setprop_inplace_u32()
1330 */
1331static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
1332 const char *name, uint32_t val)
1333{
1334 return fdt_setprop_inplace_u32(fdt, nodeoffset, name, val);
1335}
1336
1337/**
1338 * fdt_nop_property - replace a property with nop tags
1339 * @fdt: pointer to the device tree blob
1340 * @nodeoffset: offset of the node whose property to nop
1341 * @name: name of the property to nop
1342 *
1343 * fdt_nop_property() will replace a given property's representation
1344 * in the blob with FDT_NOP tags, effectively removing it from the
1345 * tree.
1346 *
1347 * This function will alter only the bytes in the blob which contain
1348 * the property, and will not alter or move any other part of the
1349 * tree.
1350 *
1351 * returns:
1352 * 0, on success
1353 * -FDT_ERR_NOTFOUND, node does not have the named property
1354 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1355 * -FDT_ERR_BADMAGIC,
1356 * -FDT_ERR_BADVERSION,
1357 * -FDT_ERR_BADSTATE,
1358 * -FDT_ERR_BADSTRUCTURE,
1359 * -FDT_ERR_TRUNCATED, standard meanings
1360 */
1361int fdt_nop_property(void *fdt, int nodeoffset, const char *name);
1362
1363/**
1364 * fdt_nop_node - replace a node (subtree) with nop tags
1365 * @fdt: pointer to the device tree blob
1366 * @nodeoffset: offset of the node to nop
1367 *
1368 * fdt_nop_node() will replace a given node's representation in the
1369 * blob, including all its subnodes, if any, with FDT_NOP tags,
1370 * effectively removing it from the tree.
1371 *
1372 * This function will alter only the bytes in the blob which contain
1373 * the node and its properties and subnodes, and will not alter or
1374 * move any other part of the tree.
1375 *
1376 * returns:
1377 * 0, on success
1378 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1379 * -FDT_ERR_BADMAGIC,
1380 * -FDT_ERR_BADVERSION,
1381 * -FDT_ERR_BADSTATE,
1382 * -FDT_ERR_BADSTRUCTURE,
1383 * -FDT_ERR_TRUNCATED, standard meanings
1384 */
1385int fdt_nop_node(void *fdt, int nodeoffset);
1386
1387/**********************************************************************/
1388/* Sequential write functions */
1389/**********************************************************************/
1390
1391/* fdt_create_with_flags flags */
1392#define FDT_CREATE_FLAG_NO_NAME_DEDUP 0x1
1393 /* FDT_CREATE_FLAG_NO_NAME_DEDUP: Do not try to de-duplicate property
1394 * names in the fdt. This can result in faster creation times, but
1395 * a larger fdt. */
1396
1397#define FDT_CREATE_FLAGS_ALL (FDT_CREATE_FLAG_NO_NAME_DEDUP)
1398
1399/**
1400 * fdt_create_with_flags - begin creation of a new fdt
1401 * @fdt: pointer to memory allocated where fdt will be created
1402 * @bufsize: size of the memory space at fdt
1403 * @flags: a valid combination of FDT_CREATE_FLAG_ flags, or 0.
1404 *
1405 * fdt_create_with_flags() begins the process of creating a new fdt with
1406 * the sequential write interface.
1407 *
1408 * fdt creation process must end with fdt_finished() to produce a valid fdt.
1409 *
1410 * returns:
1411 * 0, on success
1412 * -FDT_ERR_NOSPACE, bufsize is insufficient for a minimal fdt
1413 * -FDT_ERR_BADFLAGS, flags is not valid
1414 */
1415int fdt_create_with_flags(void *buf, int bufsize, uint32_t flags);
1416
1417/**
1418 * fdt_create - begin creation of a new fdt
1419 * @fdt: pointer to memory allocated where fdt will be created
1420 * @bufsize: size of the memory space at fdt
1421 *
1422 * fdt_create() is equivalent to fdt_create_with_flags() with flags=0.
1423 *
1424 * returns:
1425 * 0, on success
1426 * -FDT_ERR_NOSPACE, bufsize is insufficient for a minimal fdt
1427 */
1428int fdt_create(void *buf, int bufsize);
1429
1430int fdt_resize(void *fdt, void *buf, int bufsize);
1431int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size);
1432int fdt_finish_reservemap(void *fdt);
1433int fdt_begin_node(void *fdt, const char *name);
1434int fdt_property(void *fdt, const char *name, const void *val, int len);
1435static inline int fdt_property_u32(void *fdt, const char *name, uint32_t val)
1436{
1437 fdt32_t tmp = cpu_to_fdt32(val);
1438 return fdt_property(fdt, name, &tmp, sizeof(tmp));
1439}
1440static inline int fdt_property_u64(void *fdt, const char *name, uint64_t val)
1441{
1442 fdt64_t tmp = cpu_to_fdt64(val);
1443 return fdt_property(fdt, name, &tmp, sizeof(tmp));
1444}
1445
1446#ifndef SWIG /* Not available in Python */
1447static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val)
1448{
1449 return fdt_property_u32(fdt, name, val);
1450}
1451#endif
1452
1453/**
1454 * fdt_property_placeholder - add a new property and return a ptr to its value
1455 *
1456 * @fdt: pointer to the device tree blob
1457 * @name: name of property to add
1458 * @len: length of property value in bytes
1459 * @valp: returns a pointer to where where the value should be placed
1460 *
1461 * returns:
1462 * 0, on success
1463 * -FDT_ERR_BADMAGIC,
1464 * -FDT_ERR_NOSPACE, standard meanings
1465 */
1466int fdt_property_placeholder(void *fdt, const char *name, int len, void **valp);
1467
1468#define fdt_property_string(fdt, name, str) \
1469 fdt_property(fdt, name, str, strlen(str)+1)
1470int fdt_end_node(void *fdt);
1471int fdt_finish(void *fdt);
1472
1473/**********************************************************************/
1474/* Read-write functions */
1475/**********************************************************************/
1476
1477int fdt_create_empty_tree(void *buf, int bufsize);
1478int fdt_open_into(const void *fdt, void *buf, int bufsize);
1479int fdt_pack(void *fdt);
1480
1481/**
1482 * fdt_add_mem_rsv - add one memory reserve map entry
1483 * @fdt: pointer to the device tree blob
1484 * @address, @size: 64-bit values (native endian)
1485 *
1486 * Adds a reserve map entry to the given blob reserving a region at
1487 * address address of length size.
1488 *
1489 * This function will insert data into the reserve map and will
1490 * therefore change the indexes of some entries in the table.
1491 *
1492 * returns:
1493 * 0, on success
1494 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1495 * contain the new reservation entry
1496 * -FDT_ERR_BADMAGIC,
1497 * -FDT_ERR_BADVERSION,
1498 * -FDT_ERR_BADSTATE,
1499 * -FDT_ERR_BADSTRUCTURE,
1500 * -FDT_ERR_BADLAYOUT,
1501 * -FDT_ERR_TRUNCATED, standard meanings
1502 */
1503int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size);
1504
1505/**
1506 * fdt_del_mem_rsv - remove a memory reserve map entry
1507 * @fdt: pointer to the device tree blob
1508 * @n: entry to remove
1509 *
1510 * fdt_del_mem_rsv() removes the n-th memory reserve map entry from
1511 * the blob.
1512 *
1513 * This function will delete data from the reservation table and will
1514 * therefore change the indexes of some entries in the table.
1515 *
1516 * returns:
1517 * 0, on success
1518 * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there
1519 * are less than n+1 reserve map entries)
1520 * -FDT_ERR_BADMAGIC,
1521 * -FDT_ERR_BADVERSION,
1522 * -FDT_ERR_BADSTATE,
1523 * -FDT_ERR_BADSTRUCTURE,
1524 * -FDT_ERR_BADLAYOUT,
1525 * -FDT_ERR_TRUNCATED, standard meanings
1526 */
1527int fdt_del_mem_rsv(void *fdt, int n);
1528
1529/**
1530 * fdt_set_name - change the name of a given node
1531 * @fdt: pointer to the device tree blob
1532 * @nodeoffset: structure block offset of a node
1533 * @name: name to give the node
1534 *
1535 * fdt_set_name() replaces the name (including unit address, if any)
1536 * of the given node with the given string. NOTE: this function can't
1537 * efficiently check if the new name is unique amongst the given
1538 * node's siblings; results are undefined if this function is invoked
1539 * with a name equal to one of the given node's siblings.
1540 *
1541 * This function may insert or delete data from the blob, and will
1542 * therefore change the offsets of some existing nodes.
1543 *
1544 * returns:
1545 * 0, on success
1546 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob
1547 * to contain the new name
1548 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1549 * -FDT_ERR_BADMAGIC,
1550 * -FDT_ERR_BADVERSION,
1551 * -FDT_ERR_BADSTATE, standard meanings
1552 */
1553int fdt_set_name(void *fdt, int nodeoffset, const char *name);
1554
1555/**
1556 * fdt_setprop - create or change a property
1557 * @fdt: pointer to the device tree blob
1558 * @nodeoffset: offset of the node whose property to change
1559 * @name: name of the property to change
1560 * @val: pointer to data to set the property value to
1561 * @len: length of the property value
1562 *
1563 * fdt_setprop() sets the value of the named property in the given
1564 * node to the given value and length, creating the property if it
1565 * does not already exist.
1566 *
1567 * This function may insert or delete data from the blob, and will
1568 * therefore change the offsets of some existing nodes.
1569 *
1570 * returns:
1571 * 0, on success
1572 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1573 * contain the new property value
1574 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1575 * -FDT_ERR_BADLAYOUT,
1576 * -FDT_ERR_BADMAGIC,
1577 * -FDT_ERR_BADVERSION,
1578 * -FDT_ERR_BADSTATE,
1579 * -FDT_ERR_BADSTRUCTURE,
1580 * -FDT_ERR_BADLAYOUT,
1581 * -FDT_ERR_TRUNCATED, standard meanings
1582 */
1583int fdt_setprop(void *fdt, int nodeoffset, const char *name,
1584 const void *val, int len);
1585
1586/**
1587 * fdt_setprop_placeholder - allocate space for a property
1588 * @fdt: pointer to the device tree blob
1589 * @nodeoffset: offset of the node whose property to change
1590 * @name: name of the property to change
1591 * @len: length of the property value
1592 * @prop_data: return pointer to property data
1593 *
1594 * fdt_setprop_placeholer() allocates the named property in the given node.
1595 * If the property exists it is resized. In either case a pointer to the
1596 * property data is returned.
1597 *
1598 * This function may insert or delete data from the blob, and will
1599 * therefore change the offsets of some existing nodes.
1600 *
1601 * returns:
1602 * 0, on success
1603 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1604 * contain the new property value
1605 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1606 * -FDT_ERR_BADLAYOUT,
1607 * -FDT_ERR_BADMAGIC,
1608 * -FDT_ERR_BADVERSION,
1609 * -FDT_ERR_BADSTATE,
1610 * -FDT_ERR_BADSTRUCTURE,
1611 * -FDT_ERR_BADLAYOUT,
1612 * -FDT_ERR_TRUNCATED, standard meanings
1613 */
1614int fdt_setprop_placeholder(void *fdt, int nodeoffset, const char *name,
1615 int len, void **prop_data);
1616
1617/**
1618 * fdt_setprop_u32 - set a property to a 32-bit integer
1619 * @fdt: pointer to the device tree blob
1620 * @nodeoffset: offset of the node whose property to change
1621 * @name: name of the property to change
1622 * @val: 32-bit integer value for the property (native endian)
1623 *
1624 * fdt_setprop_u32() sets the value of the named property in the given
1625 * node to the given 32-bit integer value (converting to big-endian if
1626 * necessary), or creates a new property with that value if it does
1627 * not already exist.
1628 *
1629 * This function may insert or delete data from the blob, and will
1630 * therefore change the offsets of some existing nodes.
1631 *
1632 * returns:
1633 * 0, on success
1634 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1635 * contain the new property value
1636 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1637 * -FDT_ERR_BADLAYOUT,
1638 * -FDT_ERR_BADMAGIC,
1639 * -FDT_ERR_BADVERSION,
1640 * -FDT_ERR_BADSTATE,
1641 * -FDT_ERR_BADSTRUCTURE,
1642 * -FDT_ERR_BADLAYOUT,
1643 * -FDT_ERR_TRUNCATED, standard meanings
1644 */
1645static inline int fdt_setprop_u32(void *fdt, int nodeoffset, const char *name,
1646 uint32_t val)
1647{
1648 fdt32_t tmp = cpu_to_fdt32(val);
1649 return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
1650}
1651
1652/**
1653 * fdt_setprop_u64 - set a property to a 64-bit integer
1654 * @fdt: pointer to the device tree blob
1655 * @nodeoffset: offset of the node whose property to change
1656 * @name: name of the property to change
1657 * @val: 64-bit integer value for the property (native endian)
1658 *
1659 * fdt_setprop_u64() sets the value of the named property in the given
1660 * node to the given 64-bit integer value (converting to big-endian if
1661 * necessary), or creates a new property with that value if it does
1662 * not already exist.
1663 *
1664 * This function may insert or delete data from the blob, and will
1665 * therefore change the offsets of some existing nodes.
1666 *
1667 * returns:
1668 * 0, on success
1669 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1670 * contain the new property value
1671 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1672 * -FDT_ERR_BADLAYOUT,
1673 * -FDT_ERR_BADMAGIC,
1674 * -FDT_ERR_BADVERSION,
1675 * -FDT_ERR_BADSTATE,
1676 * -FDT_ERR_BADSTRUCTURE,
1677 * -FDT_ERR_BADLAYOUT,
1678 * -FDT_ERR_TRUNCATED, standard meanings
1679 */
1680static inline int fdt_setprop_u64(void *fdt, int nodeoffset, const char *name,
1681 uint64_t val)
1682{
1683 fdt64_t tmp = cpu_to_fdt64(val);
1684 return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
1685}
1686
1687/**
1688 * fdt_setprop_cell - set a property to a single cell value
1689 *
1690 * This is an alternative name for fdt_setprop_u32()
1691 */
1692static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
1693 uint32_t val)
1694{
1695 return fdt_setprop_u32(fdt, nodeoffset, name, val);
1696}
1697
1698/**
1699 * fdt_setprop_string - set a property to a string value
1700 * @fdt: pointer to the device tree blob
1701 * @nodeoffset: offset of the node whose property to change
1702 * @name: name of the property to change
1703 * @str: string value for the property
1704 *
1705 * fdt_setprop_string() sets the value of the named property in the
1706 * given node to the given string value (using the length of the
1707 * string to determine the new length of the property), or creates a
1708 * new property with that value if it does not already exist.
1709 *
1710 * This function may insert or delete data from the blob, and will
1711 * therefore change the offsets of some existing nodes.
1712 *
1713 * returns:
1714 * 0, on success
1715 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1716 * contain the new property value
1717 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1718 * -FDT_ERR_BADLAYOUT,
1719 * -FDT_ERR_BADMAGIC,
1720 * -FDT_ERR_BADVERSION,
1721 * -FDT_ERR_BADSTATE,
1722 * -FDT_ERR_BADSTRUCTURE,
1723 * -FDT_ERR_BADLAYOUT,
1724 * -FDT_ERR_TRUNCATED, standard meanings
1725 */
1726#define fdt_setprop_string(fdt, nodeoffset, name, str) \
1727 fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
1728
1729
1730/**
1731 * fdt_setprop_empty - set a property to an empty value
1732 * @fdt: pointer to the device tree blob
1733 * @nodeoffset: offset of the node whose property to change
1734 * @name: name of the property to change
1735 *
1736 * fdt_setprop_empty() sets the value of the named property in the
1737 * given node to an empty (zero length) value, or creates a new empty
1738 * property if it does not already exist.
1739 *
1740 * This function may insert or delete data from the blob, and will
1741 * therefore change the offsets of some existing nodes.
1742 *
1743 * returns:
1744 * 0, on success
1745 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1746 * contain the new property value
1747 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1748 * -FDT_ERR_BADLAYOUT,
1749 * -FDT_ERR_BADMAGIC,
1750 * -FDT_ERR_BADVERSION,
1751 * -FDT_ERR_BADSTATE,
1752 * -FDT_ERR_BADSTRUCTURE,
1753 * -FDT_ERR_BADLAYOUT,
1754 * -FDT_ERR_TRUNCATED, standard meanings
1755 */
1756#define fdt_setprop_empty(fdt, nodeoffset, name) \
1757 fdt_setprop((fdt), (nodeoffset), (name), NULL, 0)
1758
1759/**
1760 * fdt_appendprop - append to or create a property
1761 * @fdt: pointer to the device tree blob
1762 * @nodeoffset: offset of the node whose property to change
1763 * @name: name of the property to append to
1764 * @val: pointer to data to append to the property value
1765 * @len: length of the data to append to the property value
1766 *
1767 * fdt_appendprop() appends the value to the named property in the
1768 * given node, creating the property if it does not already exist.
1769 *
1770 * This function may insert data into the blob, and will therefore
1771 * change the offsets of some existing nodes.
1772 *
1773 * returns:
1774 * 0, on success
1775 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1776 * contain the new property value
1777 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1778 * -FDT_ERR_BADLAYOUT,
1779 * -FDT_ERR_BADMAGIC,
1780 * -FDT_ERR_BADVERSION,
1781 * -FDT_ERR_BADSTATE,
1782 * -FDT_ERR_BADSTRUCTURE,
1783 * -FDT_ERR_BADLAYOUT,
1784 * -FDT_ERR_TRUNCATED, standard meanings
1785 */
1786int fdt_appendprop(void *fdt, int nodeoffset, const char *name,
1787 const void *val, int len);
1788
1789/**
1790 * fdt_appendprop_u32 - append a 32-bit integer value to a property
1791 * @fdt: pointer to the device tree blob
1792 * @nodeoffset: offset of the node whose property to change
1793 * @name: name of the property to change
1794 * @val: 32-bit integer value to append to the property (native endian)
1795 *
1796 * fdt_appendprop_u32() appends the given 32-bit integer value
1797 * (converting to big-endian if necessary) to the value of the named
1798 * property in the given node, or creates a new property with that
1799 * value if it does not already exist.
1800 *
1801 * This function may insert data into the blob, and will therefore
1802 * change the offsets of some existing nodes.
1803 *
1804 * returns:
1805 * 0, on success
1806 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1807 * contain the new property value
1808 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1809 * -FDT_ERR_BADLAYOUT,
1810 * -FDT_ERR_BADMAGIC,
1811 * -FDT_ERR_BADVERSION,
1812 * -FDT_ERR_BADSTATE,
1813 * -FDT_ERR_BADSTRUCTURE,
1814 * -FDT_ERR_BADLAYOUT,
1815 * -FDT_ERR_TRUNCATED, standard meanings
1816 */
1817static inline int fdt_appendprop_u32(void *fdt, int nodeoffset,
1818 const char *name, uint32_t val)
1819{
1820 fdt32_t tmp = cpu_to_fdt32(val);
1821 return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
1822}
1823
1824/**
1825 * fdt_appendprop_u64 - append a 64-bit integer value to a property
1826 * @fdt: pointer to the device tree blob
1827 * @nodeoffset: offset of the node whose property to change
1828 * @name: name of the property to change
1829 * @val: 64-bit integer value to append to the property (native endian)
1830 *
1831 * fdt_appendprop_u64() appends the given 64-bit integer value
1832 * (converting to big-endian if necessary) to the value of the named
1833 * property in the given node, or creates a new property with that
1834 * value if it does not already exist.
1835 *
1836 * This function may insert data into the blob, and will therefore
1837 * change the offsets of some existing nodes.
1838 *
1839 * returns:
1840 * 0, on success
1841 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1842 * contain the new property value
1843 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1844 * -FDT_ERR_BADLAYOUT,
1845 * -FDT_ERR_BADMAGIC,
1846 * -FDT_ERR_BADVERSION,
1847 * -FDT_ERR_BADSTATE,
1848 * -FDT_ERR_BADSTRUCTURE,
1849 * -FDT_ERR_BADLAYOUT,
1850 * -FDT_ERR_TRUNCATED, standard meanings
1851 */
1852static inline int fdt_appendprop_u64(void *fdt, int nodeoffset,
1853 const char *name, uint64_t val)
1854{
1855 fdt64_t tmp = cpu_to_fdt64(val);
1856 return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
1857}
1858
1859/**
1860 * fdt_appendprop_cell - append a single cell value to a property
1861 *
1862 * This is an alternative name for fdt_appendprop_u32()
1863 */
1864static inline int fdt_appendprop_cell(void *fdt, int nodeoffset,
1865 const char *name, uint32_t val)
1866{
1867 return fdt_appendprop_u32(fdt, nodeoffset, name, val);
1868}
1869
1870/**
1871 * fdt_appendprop_string - append a string to a property
1872 * @fdt: pointer to the device tree blob
1873 * @nodeoffset: offset of the node whose property to change
1874 * @name: name of the property to change
1875 * @str: string value to append to the property
1876 *
1877 * fdt_appendprop_string() appends the given string to the value of
1878 * the named property in the given node, or creates a new property
1879 * with that value if it does not already exist.
1880 *
1881 * This function may insert data into the blob, and will therefore
1882 * change the offsets of some existing nodes.
1883 *
1884 * returns:
1885 * 0, on success
1886 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1887 * contain the new property value
1888 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1889 * -FDT_ERR_BADLAYOUT,
1890 * -FDT_ERR_BADMAGIC,
1891 * -FDT_ERR_BADVERSION,
1892 * -FDT_ERR_BADSTATE,
1893 * -FDT_ERR_BADSTRUCTURE,
1894 * -FDT_ERR_BADLAYOUT,
1895 * -FDT_ERR_TRUNCATED, standard meanings
1896 */
1897#define fdt_appendprop_string(fdt, nodeoffset, name, str) \
1898 fdt_appendprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
1899
1900/**
1901 * fdt_appendprop_addrrange - append a address range property
1902 * @fdt: pointer to the device tree blob
1903 * @parent: offset of the parent node
1904 * @nodeoffset: offset of the node to add a property at
1905 * @name: name of property
1906 * @addr: start address of a given range
1907 * @size: size of a given range
1908 *
1909 * fdt_appendprop_addrrange() appends an address range value (start
1910 * address and size) to the value of the named property in the given
1911 * node, or creates a new property with that value if it does not
1912 * already exist.
1913 * If "name" is not specified, a default "reg" is used.
1914 * Cell sizes are determined by parent's #address-cells and #size-cells.
1915 *
1916 * This function may insert data into the blob, and will therefore
1917 * change the offsets of some existing nodes.
1918 *
1919 * returns:
1920 * 0, on success
1921 * -FDT_ERR_BADLAYOUT,
1922 * -FDT_ERR_BADMAGIC,
1923 * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid
1924 * #address-cells property
1925 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1926 * -FDT_ERR_BADSTATE,
1927 * -FDT_ERR_BADSTRUCTURE,
1928 * -FDT_ERR_BADVERSION,
1929 * -FDT_ERR_BADVALUE, addr or size doesn't fit to respective cells size
1930 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1931 * contain a new property
1932 * -FDT_ERR_TRUNCATED, standard meanings
1933 */
1934int fdt_appendprop_addrrange(void *fdt, int parent, int nodeoffset,
1935 const char *name, uint64_t addr, uint64_t size);
1936
1937/**
1938 * fdt_delprop - delete a property
1939 * @fdt: pointer to the device tree blob
1940 * @nodeoffset: offset of the node whose property to nop
1941 * @name: name of the property to nop
1942 *
1943 * fdt_del_property() will delete the given property.
1944 *
1945 * This function will delete data from the blob, and will therefore
1946 * change the offsets of some existing nodes.
1947 *
1948 * returns:
1949 * 0, on success
1950 * -FDT_ERR_NOTFOUND, node does not have the named property
1951 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1952 * -FDT_ERR_BADLAYOUT,
1953 * -FDT_ERR_BADMAGIC,
1954 * -FDT_ERR_BADVERSION,
1955 * -FDT_ERR_BADSTATE,
1956 * -FDT_ERR_BADSTRUCTURE,
1957 * -FDT_ERR_TRUNCATED, standard meanings
1958 */
1959int fdt_delprop(void *fdt, int nodeoffset, const char *name);
1960
1961/**
1962 * fdt_add_subnode_namelen - creates a new node based on substring
1963 * @fdt: pointer to the device tree blob
1964 * @parentoffset: structure block offset of a node
1965 * @name: name of the subnode to locate
1966 * @namelen: number of characters of name to consider
1967 *
1968 * Identical to fdt_add_subnode(), but use only the first namelen
1969 * characters of name as the name of the new node. This is useful for
1970 * creating subnodes based on a portion of a larger string, such as a
1971 * full path.
1972 */
1973#ifndef SWIG /* Not available in Python */
1974int fdt_add_subnode_namelen(void *fdt, int parentoffset,
1975 const char *name, int namelen);
1976#endif
1977
1978/**
1979 * fdt_add_subnode - creates a new node
1980 * @fdt: pointer to the device tree blob
1981 * @parentoffset: structure block offset of a node
1982 * @name: name of the subnode to locate
1983 *
1984 * fdt_add_subnode() creates a new node as a subnode of the node at
1985 * structure block offset parentoffset, with the given name (which
1986 * should include the unit address, if any).
1987 *
1988 * This function will insert data into the blob, and will therefore
1989 * change the offsets of some existing nodes.
1990
1991 * returns:
1992 * structure block offset of the created nodeequested subnode (>=0), on
1993 * success
1994 * -FDT_ERR_NOTFOUND, if the requested subnode does not exist
1995 * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE
1996 * tag
1997 * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of
1998 * the given name
1999 * -FDT_ERR_NOSPACE, if there is insufficient free space in the
2000 * blob to contain the new node
2001 * -FDT_ERR_NOSPACE
2002 * -FDT_ERR_BADLAYOUT
2003 * -FDT_ERR_BADMAGIC,
2004 * -FDT_ERR_BADVERSION,
2005 * -FDT_ERR_BADSTATE,
2006 * -FDT_ERR_BADSTRUCTURE,
2007 * -FDT_ERR_TRUNCATED, standard meanings.
2008 */
2009int fdt_add_subnode(void *fdt, int parentoffset, const char *name);
2010
2011/**
2012 * fdt_del_node - delete a node (subtree)
2013 * @fdt: pointer to the device tree blob
2014 * @nodeoffset: offset of the node to nop
2015 *
2016 * fdt_del_node() will remove the given node, including all its
2017 * subnodes if any, from the blob.
2018 *
2019 * This function will delete data from the blob, and will therefore
2020 * change the offsets of some existing nodes.
2021 *
2022 * returns:
2023 * 0, on success
2024 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
2025 * -FDT_ERR_BADLAYOUT,
2026 * -FDT_ERR_BADMAGIC,
2027 * -FDT_ERR_BADVERSION,
2028 * -FDT_ERR_BADSTATE,
2029 * -FDT_ERR_BADSTRUCTURE,
2030 * -FDT_ERR_TRUNCATED, standard meanings
2031 */
2032int fdt_del_node(void *fdt, int nodeoffset);
2033
2034/**
2035 * fdt_overlay_apply - Applies a DT overlay on a base DT
2036 * @fdt: pointer to the base device tree blob
2037 * @fdto: pointer to the device tree overlay blob
2038 *
2039 * fdt_overlay_apply() will apply the given device tree overlay on the
2040 * given base device tree.
2041 *
2042 * Expect the base device tree to be modified, even if the function
2043 * returns an error.
2044 *
2045 * returns:
2046 * 0, on success
2047 * -FDT_ERR_NOSPACE, there's not enough space in the base device tree
2048 * -FDT_ERR_NOTFOUND, the overlay points to some inexistant nodes or
2049 * properties in the base DT
2050 * -FDT_ERR_BADPHANDLE,
2051 * -FDT_ERR_BADOVERLAY,
2052 * -FDT_ERR_NOPHANDLES,
2053 * -FDT_ERR_INTERNAL,
2054 * -FDT_ERR_BADLAYOUT,
2055 * -FDT_ERR_BADMAGIC,
2056 * -FDT_ERR_BADOFFSET,
2057 * -FDT_ERR_BADPATH,
2058 * -FDT_ERR_BADVERSION,
2059 * -FDT_ERR_BADSTRUCTURE,
2060 * -FDT_ERR_BADSTATE,
2061 * -FDT_ERR_TRUNCATED, standard meanings
2062 */
2063int fdt_overlay_apply(void *fdt, void *fdto);
2064
2065/**********************************************************************/
2066/* Debugging / informational functions */
2067/**********************************************************************/
2068
2069const char *fdt_strerror(int errval);
2070
2071#endif /* LIBFDT_H */
1/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) */
2#ifndef LIBFDT_H
3#define LIBFDT_H
4/*
5 * libfdt - Flat Device Tree manipulation
6 * Copyright (C) 2006 David Gibson, IBM Corporation.
7 */
8
9#include "libfdt_env.h"
10#include "fdt.h"
11
12#ifdef __cplusplus
13extern "C" {
14#endif
15
16#define FDT_FIRST_SUPPORTED_VERSION 0x02
17#define FDT_LAST_SUPPORTED_VERSION 0x11
18
19/* Error codes: informative error codes */
20#define FDT_ERR_NOTFOUND 1
21 /* FDT_ERR_NOTFOUND: The requested node or property does not exist */
22#define FDT_ERR_EXISTS 2
23 /* FDT_ERR_EXISTS: Attempted to create a node or property which
24 * already exists */
25#define FDT_ERR_NOSPACE 3
26 /* FDT_ERR_NOSPACE: Operation needed to expand the device
27 * tree, but its buffer did not have sufficient space to
28 * contain the expanded tree. Use fdt_open_into() to move the
29 * device tree to a buffer with more space. */
30
31/* Error codes: codes for bad parameters */
32#define FDT_ERR_BADOFFSET 4
33 /* FDT_ERR_BADOFFSET: Function was passed a structure block
34 * offset which is out-of-bounds, or which points to an
35 * unsuitable part of the structure for the operation. */
36#define FDT_ERR_BADPATH 5
37 /* FDT_ERR_BADPATH: Function was passed a badly formatted path
38 * (e.g. missing a leading / for a function which requires an
39 * absolute path) */
40#define FDT_ERR_BADPHANDLE 6
41 /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle.
42 * This can be caused either by an invalid phandle property
43 * length, or the phandle value was either 0 or -1, which are
44 * not permitted. */
45#define FDT_ERR_BADSTATE 7
46 /* FDT_ERR_BADSTATE: Function was passed an incomplete device
47 * tree created by the sequential-write functions, which is
48 * not sufficiently complete for the requested operation. */
49
50/* Error codes: codes for bad device tree blobs */
51#define FDT_ERR_TRUNCATED 8
52 /* FDT_ERR_TRUNCATED: FDT or a sub-block is improperly
53 * terminated (overflows, goes outside allowed bounds, or
54 * isn't properly terminated). */
55#define FDT_ERR_BADMAGIC 9
56 /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a
57 * device tree at all - it is missing the flattened device
58 * tree magic number. */
59#define FDT_ERR_BADVERSION 10
60 /* FDT_ERR_BADVERSION: Given device tree has a version which
61 * can't be handled by the requested operation. For
62 * read-write functions, this may mean that fdt_open_into() is
63 * required to convert the tree to the expected version. */
64#define FDT_ERR_BADSTRUCTURE 11
65 /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt
66 * structure block or other serious error (e.g. misnested
67 * nodes, or subnodes preceding properties). */
68#define FDT_ERR_BADLAYOUT 12
69 /* FDT_ERR_BADLAYOUT: For read-write functions, the given
70 * device tree has it's sub-blocks in an order that the
71 * function can't handle (memory reserve map, then structure,
72 * then strings). Use fdt_open_into() to reorganize the tree
73 * into a form suitable for the read-write operations. */
74
75/* "Can't happen" error indicating a bug in libfdt */
76#define FDT_ERR_INTERNAL 13
77 /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion.
78 * Should never be returned, if it is, it indicates a bug in
79 * libfdt itself. */
80
81/* Errors in device tree content */
82#define FDT_ERR_BADNCELLS 14
83 /* FDT_ERR_BADNCELLS: Device tree has a #address-cells, #size-cells
84 * or similar property with a bad format or value */
85
86#define FDT_ERR_BADVALUE 15
87 /* FDT_ERR_BADVALUE: Device tree has a property with an unexpected
88 * value. For example: a property expected to contain a string list
89 * is not NUL-terminated within the length of its value. */
90
91#define FDT_ERR_BADOVERLAY 16
92 /* FDT_ERR_BADOVERLAY: The device tree overlay, while
93 * correctly structured, cannot be applied due to some
94 * unexpected or missing value, property or node. */
95
96#define FDT_ERR_NOPHANDLES 17
97 /* FDT_ERR_NOPHANDLES: The device tree doesn't have any
98 * phandle available anymore without causing an overflow */
99
100#define FDT_ERR_BADFLAGS 18
101 /* FDT_ERR_BADFLAGS: The function was passed a flags field that
102 * contains invalid flags or an invalid combination of flags. */
103
104#define FDT_ERR_MAX 18
105
106/* constants */
107#define FDT_MAX_PHANDLE 0xfffffffe
108 /* Valid values for phandles range from 1 to 2^32-2. */
109
110/**********************************************************************/
111/* Low-level functions (you probably don't need these) */
112/**********************************************************************/
113
114#ifndef SWIG /* This function is not useful in Python */
115const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int checklen);
116#endif
117static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen)
118{
119 return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen);
120}
121
122uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset);
123
124/*
125 * Alignment helpers:
126 * These helpers access words from a device tree blob. They're
127 * built to work even with unaligned pointers on platforms (ike
128 * ARM) that don't like unaligned loads and stores
129 */
130
131static inline uint32_t fdt32_ld(const fdt32_t *p)
132{
133 const uint8_t *bp = (const uint8_t *)p;
134
135 return ((uint32_t)bp[0] << 24)
136 | ((uint32_t)bp[1] << 16)
137 | ((uint32_t)bp[2] << 8)
138 | bp[3];
139}
140
141static inline void fdt32_st(void *property, uint32_t value)
142{
143 uint8_t *bp = (uint8_t *)property;
144
145 bp[0] = value >> 24;
146 bp[1] = (value >> 16) & 0xff;
147 bp[2] = (value >> 8) & 0xff;
148 bp[3] = value & 0xff;
149}
150
151static inline uint64_t fdt64_ld(const fdt64_t *p)
152{
153 const uint8_t *bp = (const uint8_t *)p;
154
155 return ((uint64_t)bp[0] << 56)
156 | ((uint64_t)bp[1] << 48)
157 | ((uint64_t)bp[2] << 40)
158 | ((uint64_t)bp[3] << 32)
159 | ((uint64_t)bp[4] << 24)
160 | ((uint64_t)bp[5] << 16)
161 | ((uint64_t)bp[6] << 8)
162 | bp[7];
163}
164
165static inline void fdt64_st(void *property, uint64_t value)
166{
167 uint8_t *bp = (uint8_t *)property;
168
169 bp[0] = value >> 56;
170 bp[1] = (value >> 48) & 0xff;
171 bp[2] = (value >> 40) & 0xff;
172 bp[3] = (value >> 32) & 0xff;
173 bp[4] = (value >> 24) & 0xff;
174 bp[5] = (value >> 16) & 0xff;
175 bp[6] = (value >> 8) & 0xff;
176 bp[7] = value & 0xff;
177}
178
179/**********************************************************************/
180/* Traversal functions */
181/**********************************************************************/
182
183int fdt_next_node(const void *fdt, int offset, int *depth);
184
185/**
186 * fdt_first_subnode() - get offset of first direct subnode
187 *
188 * @fdt: FDT blob
189 * @offset: Offset of node to check
190 * @return offset of first subnode, or -FDT_ERR_NOTFOUND if there is none
191 */
192int fdt_first_subnode(const void *fdt, int offset);
193
194/**
195 * fdt_next_subnode() - get offset of next direct subnode
196 *
197 * After first calling fdt_first_subnode(), call this function repeatedly to
198 * get direct subnodes of a parent node.
199 *
200 * @fdt: FDT blob
201 * @offset: Offset of previous subnode
202 * @return offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more
203 * subnodes
204 */
205int fdt_next_subnode(const void *fdt, int offset);
206
207/**
208 * fdt_for_each_subnode - iterate over all subnodes of a parent
209 *
210 * @node: child node (int, lvalue)
211 * @fdt: FDT blob (const void *)
212 * @parent: parent node (int)
213 *
214 * This is actually a wrapper around a for loop and would be used like so:
215 *
216 * fdt_for_each_subnode(node, fdt, parent) {
217 * Use node
218 * ...
219 * }
220 *
221 * if ((node < 0) && (node != -FDT_ERR_NOTFOUND)) {
222 * Error handling
223 * }
224 *
225 * Note that this is implemented as a macro and @node is used as
226 * iterator in the loop. The parent variable be constant or even a
227 * literal.
228 *
229 */
230#define fdt_for_each_subnode(node, fdt, parent) \
231 for (node = fdt_first_subnode(fdt, parent); \
232 node >= 0; \
233 node = fdt_next_subnode(fdt, node))
234
235/**********************************************************************/
236/* General functions */
237/**********************************************************************/
238#define fdt_get_header(fdt, field) \
239 (fdt32_ld(&((const struct fdt_header *)(fdt))->field))
240#define fdt_magic(fdt) (fdt_get_header(fdt, magic))
241#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize))
242#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct))
243#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings))
244#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap))
245#define fdt_version(fdt) (fdt_get_header(fdt, version))
246#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version))
247#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys))
248#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings))
249#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct))
250
251#define fdt_set_hdr_(name) \
252 static inline void fdt_set_##name(void *fdt, uint32_t val) \
253 { \
254 struct fdt_header *fdth = (struct fdt_header *)fdt; \
255 fdth->name = cpu_to_fdt32(val); \
256 }
257fdt_set_hdr_(magic);
258fdt_set_hdr_(totalsize);
259fdt_set_hdr_(off_dt_struct);
260fdt_set_hdr_(off_dt_strings);
261fdt_set_hdr_(off_mem_rsvmap);
262fdt_set_hdr_(version);
263fdt_set_hdr_(last_comp_version);
264fdt_set_hdr_(boot_cpuid_phys);
265fdt_set_hdr_(size_dt_strings);
266fdt_set_hdr_(size_dt_struct);
267#undef fdt_set_hdr_
268
269/**
270 * fdt_header_size - return the size of the tree's header
271 * @fdt: pointer to a flattened device tree
272 */
273size_t fdt_header_size(const void *fdt);
274
275/**
276 * fdt_header_size_ - internal function which takes a version number
277 */
278size_t fdt_header_size_(uint32_t version);
279
280/**
281 * fdt_check_header - sanity check a device tree header
282
283 * @fdt: pointer to data which might be a flattened device tree
284 *
285 * fdt_check_header() checks that the given buffer contains what
286 * appears to be a flattened device tree, and that the header contains
287 * valid information (to the extent that can be determined from the
288 * header alone).
289 *
290 * returns:
291 * 0, if the buffer appears to contain a valid device tree
292 * -FDT_ERR_BADMAGIC,
293 * -FDT_ERR_BADVERSION,
294 * -FDT_ERR_BADSTATE,
295 * -FDT_ERR_TRUNCATED, standard meanings, as above
296 */
297int fdt_check_header(const void *fdt);
298
299/**
300 * fdt_move - move a device tree around in memory
301 * @fdt: pointer to the device tree to move
302 * @buf: pointer to memory where the device is to be moved
303 * @bufsize: size of the memory space at buf
304 *
305 * fdt_move() relocates, if possible, the device tree blob located at
306 * fdt to the buffer at buf of size bufsize. The buffer may overlap
307 * with the existing device tree blob at fdt. Therefore,
308 * fdt_move(fdt, fdt, fdt_totalsize(fdt))
309 * should always succeed.
310 *
311 * returns:
312 * 0, on success
313 * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree
314 * -FDT_ERR_BADMAGIC,
315 * -FDT_ERR_BADVERSION,
316 * -FDT_ERR_BADSTATE, standard meanings
317 */
318int fdt_move(const void *fdt, void *buf, int bufsize);
319
320/**********************************************************************/
321/* Read-only functions */
322/**********************************************************************/
323
324int fdt_check_full(const void *fdt, size_t bufsize);
325
326/**
327 * fdt_get_string - retrieve a string from the strings block of a device tree
328 * @fdt: pointer to the device tree blob
329 * @stroffset: offset of the string within the strings block (native endian)
330 * @lenp: optional pointer to return the string's length
331 *
332 * fdt_get_string() retrieves a pointer to a single string from the
333 * strings block of the device tree blob at fdt, and optionally also
334 * returns the string's length in *lenp.
335 *
336 * returns:
337 * a pointer to the string, on success
338 * NULL, if stroffset is out of bounds, or doesn't point to a valid string
339 */
340const char *fdt_get_string(const void *fdt, int stroffset, int *lenp);
341
342/**
343 * fdt_string - retrieve a string from the strings block of a device tree
344 * @fdt: pointer to the device tree blob
345 * @stroffset: offset of the string within the strings block (native endian)
346 *
347 * fdt_string() retrieves a pointer to a single string from the
348 * strings block of the device tree blob at fdt.
349 *
350 * returns:
351 * a pointer to the string, on success
352 * NULL, if stroffset is out of bounds, or doesn't point to a valid string
353 */
354const char *fdt_string(const void *fdt, int stroffset);
355
356/**
357 * fdt_find_max_phandle - find and return the highest phandle in a tree
358 * @fdt: pointer to the device tree blob
359 * @phandle: return location for the highest phandle value found in the tree
360 *
361 * fdt_find_max_phandle() finds the highest phandle value in the given device
362 * tree. The value returned in @phandle is only valid if the function returns
363 * success.
364 *
365 * returns:
366 * 0 on success or a negative error code on failure
367 */
368int fdt_find_max_phandle(const void *fdt, uint32_t *phandle);
369
370/**
371 * fdt_get_max_phandle - retrieves the highest phandle in a tree
372 * @fdt: pointer to the device tree blob
373 *
374 * fdt_get_max_phandle retrieves the highest phandle in the given
375 * device tree. This will ignore badly formatted phandles, or phandles
376 * with a value of 0 or -1.
377 *
378 * This function is deprecated in favour of fdt_find_max_phandle().
379 *
380 * returns:
381 * the highest phandle on success
382 * 0, if no phandle was found in the device tree
383 * -1, if an error occurred
384 */
385static inline uint32_t fdt_get_max_phandle(const void *fdt)
386{
387 uint32_t phandle;
388 int err;
389
390 err = fdt_find_max_phandle(fdt, &phandle);
391 if (err < 0)
392 return (uint32_t)-1;
393
394 return phandle;
395}
396
397/**
398 * fdt_generate_phandle - return a new, unused phandle for a device tree blob
399 * @fdt: pointer to the device tree blob
400 * @phandle: return location for the new phandle
401 *
402 * Walks the device tree blob and looks for the highest phandle value. On
403 * success, the new, unused phandle value (one higher than the previously
404 * highest phandle value in the device tree blob) will be returned in the
405 * @phandle parameter.
406 *
407 * Returns:
408 * 0 on success or a negative error-code on failure
409 */
410int fdt_generate_phandle(const void *fdt, uint32_t *phandle);
411
412/**
413 * fdt_num_mem_rsv - retrieve the number of memory reserve map entries
414 * @fdt: pointer to the device tree blob
415 *
416 * Returns the number of entries in the device tree blob's memory
417 * reservation map. This does not include the terminating 0,0 entry
418 * or any other (0,0) entries reserved for expansion.
419 *
420 * returns:
421 * the number of entries
422 */
423int fdt_num_mem_rsv(const void *fdt);
424
425/**
426 * fdt_get_mem_rsv - retrieve one memory reserve map entry
427 * @fdt: pointer to the device tree blob
428 * @address, @size: pointers to 64-bit variables
429 *
430 * On success, *address and *size will contain the address and size of
431 * the n-th reserve map entry from the device tree blob, in
432 * native-endian format.
433 *
434 * returns:
435 * 0, on success
436 * -FDT_ERR_BADMAGIC,
437 * -FDT_ERR_BADVERSION,
438 * -FDT_ERR_BADSTATE, standard meanings
439 */
440int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size);
441
442/**
443 * fdt_subnode_offset_namelen - find a subnode based on substring
444 * @fdt: pointer to the device tree blob
445 * @parentoffset: structure block offset of a node
446 * @name: name of the subnode to locate
447 * @namelen: number of characters of name to consider
448 *
449 * Identical to fdt_subnode_offset(), but only examine the first
450 * namelen characters of name for matching the subnode name. This is
451 * useful for finding subnodes based on a portion of a larger string,
452 * such as a full path.
453 */
454#ifndef SWIG /* Not available in Python */
455int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
456 const char *name, int namelen);
457#endif
458/**
459 * fdt_subnode_offset - find a subnode of a given node
460 * @fdt: pointer to the device tree blob
461 * @parentoffset: structure block offset of a node
462 * @name: name of the subnode to locate
463 *
464 * fdt_subnode_offset() finds a subnode of the node at structure block
465 * offset parentoffset with the given name. name may include a unit
466 * address, in which case fdt_subnode_offset() will find the subnode
467 * with that unit address, or the unit address may be omitted, in
468 * which case fdt_subnode_offset() will find an arbitrary subnode
469 * whose name excluding unit address matches the given name.
470 *
471 * returns:
472 * structure block offset of the requested subnode (>=0), on success
473 * -FDT_ERR_NOTFOUND, if the requested subnode does not exist
474 * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE
475 * tag
476 * -FDT_ERR_BADMAGIC,
477 * -FDT_ERR_BADVERSION,
478 * -FDT_ERR_BADSTATE,
479 * -FDT_ERR_BADSTRUCTURE,
480 * -FDT_ERR_TRUNCATED, standard meanings.
481 */
482int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name);
483
484/**
485 * fdt_path_offset_namelen - find a tree node by its full path
486 * @fdt: pointer to the device tree blob
487 * @path: full path of the node to locate
488 * @namelen: number of characters of path to consider
489 *
490 * Identical to fdt_path_offset(), but only consider the first namelen
491 * characters of path as the path name.
492 */
493#ifndef SWIG /* Not available in Python */
494int fdt_path_offset_namelen(const void *fdt, const char *path, int namelen);
495#endif
496
497/**
498 * fdt_path_offset - find a tree node by its full path
499 * @fdt: pointer to the device tree blob
500 * @path: full path of the node to locate
501 *
502 * fdt_path_offset() finds a node of a given path in the device tree.
503 * Each path component may omit the unit address portion, but the
504 * results of this are undefined if any such path component is
505 * ambiguous (that is if there are multiple nodes at the relevant
506 * level matching the given component, differentiated only by unit
507 * address).
508 *
509 * returns:
510 * structure block offset of the node with the requested path (>=0), on
511 * success
512 * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid
513 * -FDT_ERR_NOTFOUND, if the requested node does not exist
514 * -FDT_ERR_BADMAGIC,
515 * -FDT_ERR_BADVERSION,
516 * -FDT_ERR_BADSTATE,
517 * -FDT_ERR_BADSTRUCTURE,
518 * -FDT_ERR_TRUNCATED, standard meanings.
519 */
520int fdt_path_offset(const void *fdt, const char *path);
521
522/**
523 * fdt_get_name - retrieve the name of a given node
524 * @fdt: pointer to the device tree blob
525 * @nodeoffset: structure block offset of the starting node
526 * @lenp: pointer to an integer variable (will be overwritten) or NULL
527 *
528 * fdt_get_name() retrieves the name (including unit address) of the
529 * device tree node at structure block offset nodeoffset. If lenp is
530 * non-NULL, the length of this name is also returned, in the integer
531 * pointed to by lenp.
532 *
533 * returns:
534 * pointer to the node's name, on success
535 * If lenp is non-NULL, *lenp contains the length of that name
536 * (>=0)
537 * NULL, on error
538 * if lenp is non-NULL *lenp contains an error code (<0):
539 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE
540 * tag
541 * -FDT_ERR_BADMAGIC,
542 * -FDT_ERR_BADVERSION,
543 * -FDT_ERR_BADSTATE, standard meanings
544 */
545const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp);
546
547/**
548 * fdt_first_property_offset - find the offset of a node's first property
549 * @fdt: pointer to the device tree blob
550 * @nodeoffset: structure block offset of a node
551 *
552 * fdt_first_property_offset() finds the first property of the node at
553 * the given structure block offset.
554 *
555 * returns:
556 * structure block offset of the property (>=0), on success
557 * -FDT_ERR_NOTFOUND, if the requested node has no properties
558 * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_BEGIN_NODE tag
559 * -FDT_ERR_BADMAGIC,
560 * -FDT_ERR_BADVERSION,
561 * -FDT_ERR_BADSTATE,
562 * -FDT_ERR_BADSTRUCTURE,
563 * -FDT_ERR_TRUNCATED, standard meanings.
564 */
565int fdt_first_property_offset(const void *fdt, int nodeoffset);
566
567/**
568 * fdt_next_property_offset - step through a node's properties
569 * @fdt: pointer to the device tree blob
570 * @offset: structure block offset of a property
571 *
572 * fdt_next_property_offset() finds the property immediately after the
573 * one at the given structure block offset. This will be a property
574 * of the same node as the given property.
575 *
576 * returns:
577 * structure block offset of the next property (>=0), on success
578 * -FDT_ERR_NOTFOUND, if the given property is the last in its node
579 * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_PROP tag
580 * -FDT_ERR_BADMAGIC,
581 * -FDT_ERR_BADVERSION,
582 * -FDT_ERR_BADSTATE,
583 * -FDT_ERR_BADSTRUCTURE,
584 * -FDT_ERR_TRUNCATED, standard meanings.
585 */
586int fdt_next_property_offset(const void *fdt, int offset);
587
588/**
589 * fdt_for_each_property_offset - iterate over all properties of a node
590 *
591 * @property_offset: property offset (int, lvalue)
592 * @fdt: FDT blob (const void *)
593 * @node: node offset (int)
594 *
595 * This is actually a wrapper around a for loop and would be used like so:
596 *
597 * fdt_for_each_property_offset(property, fdt, node) {
598 * Use property
599 * ...
600 * }
601 *
602 * if ((property < 0) && (property != -FDT_ERR_NOTFOUND)) {
603 * Error handling
604 * }
605 *
606 * Note that this is implemented as a macro and property is used as
607 * iterator in the loop. The node variable can be constant or even a
608 * literal.
609 */
610#define fdt_for_each_property_offset(property, fdt, node) \
611 for (property = fdt_first_property_offset(fdt, node); \
612 property >= 0; \
613 property = fdt_next_property_offset(fdt, property))
614
615/**
616 * fdt_get_property_by_offset - retrieve the property at a given offset
617 * @fdt: pointer to the device tree blob
618 * @offset: offset of the property to retrieve
619 * @lenp: pointer to an integer variable (will be overwritten) or NULL
620 *
621 * fdt_get_property_by_offset() retrieves a pointer to the
622 * fdt_property structure within the device tree blob at the given
623 * offset. If lenp is non-NULL, the length of the property value is
624 * also returned, in the integer pointed to by lenp.
625 *
626 * Note that this code only works on device tree versions >= 16. fdt_getprop()
627 * works on all versions.
628 *
629 * returns:
630 * pointer to the structure representing the property
631 * if lenp is non-NULL, *lenp contains the length of the property
632 * value (>=0)
633 * NULL, on error
634 * if lenp is non-NULL, *lenp contains an error code (<0):
635 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag
636 * -FDT_ERR_BADMAGIC,
637 * -FDT_ERR_BADVERSION,
638 * -FDT_ERR_BADSTATE,
639 * -FDT_ERR_BADSTRUCTURE,
640 * -FDT_ERR_TRUNCATED, standard meanings
641 */
642const struct fdt_property *fdt_get_property_by_offset(const void *fdt,
643 int offset,
644 int *lenp);
645
646/**
647 * fdt_get_property_namelen - find a property based on substring
648 * @fdt: pointer to the device tree blob
649 * @nodeoffset: offset of the node whose property to find
650 * @name: name of the property to find
651 * @namelen: number of characters of name to consider
652 * @lenp: pointer to an integer variable (will be overwritten) or NULL
653 *
654 * Identical to fdt_get_property(), but only examine the first namelen
655 * characters of name for matching the property name.
656 */
657#ifndef SWIG /* Not available in Python */
658const struct fdt_property *fdt_get_property_namelen(const void *fdt,
659 int nodeoffset,
660 const char *name,
661 int namelen, int *lenp);
662#endif
663
664/**
665 * fdt_get_property - find a given property in a given node
666 * @fdt: pointer to the device tree blob
667 * @nodeoffset: offset of the node whose property to find
668 * @name: name of the property to find
669 * @lenp: pointer to an integer variable (will be overwritten) or NULL
670 *
671 * fdt_get_property() retrieves a pointer to the fdt_property
672 * structure within the device tree blob corresponding to the property
673 * named 'name' of the node at offset nodeoffset. If lenp is
674 * non-NULL, the length of the property value is also returned, in the
675 * integer pointed to by lenp.
676 *
677 * returns:
678 * pointer to the structure representing the property
679 * if lenp is non-NULL, *lenp contains the length of the property
680 * value (>=0)
681 * NULL, on error
682 * if lenp is non-NULL, *lenp contains an error code (<0):
683 * -FDT_ERR_NOTFOUND, node does not have named property
684 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE
685 * tag
686 * -FDT_ERR_BADMAGIC,
687 * -FDT_ERR_BADVERSION,
688 * -FDT_ERR_BADSTATE,
689 * -FDT_ERR_BADSTRUCTURE,
690 * -FDT_ERR_TRUNCATED, standard meanings
691 */
692const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset,
693 const char *name, int *lenp);
694static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset,
695 const char *name,
696 int *lenp)
697{
698 return (struct fdt_property *)(uintptr_t)
699 fdt_get_property(fdt, nodeoffset, name, lenp);
700}
701
702/**
703 * fdt_getprop_by_offset - retrieve the value of a property at a given offset
704 * @fdt: pointer to the device tree blob
705 * @offset: offset of the property to read
706 * @namep: pointer to a string variable (will be overwritten) or NULL
707 * @lenp: pointer to an integer variable (will be overwritten) or NULL
708 *
709 * fdt_getprop_by_offset() retrieves a pointer to the value of the
710 * property at structure block offset 'offset' (this will be a pointer
711 * to within the device blob itself, not a copy of the value). If
712 * lenp is non-NULL, the length of the property value is also
713 * returned, in the integer pointed to by lenp. If namep is non-NULL,
714 * the property's namne will also be returned in the char * pointed to
715 * by namep (this will be a pointer to within the device tree's string
716 * block, not a new copy of the name).
717 *
718 * returns:
719 * pointer to the property's value
720 * if lenp is non-NULL, *lenp contains the length of the property
721 * value (>=0)
722 * if namep is non-NULL *namep contiains a pointer to the property
723 * name.
724 * NULL, on error
725 * if lenp is non-NULL, *lenp contains an error code (<0):
726 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag
727 * -FDT_ERR_BADMAGIC,
728 * -FDT_ERR_BADVERSION,
729 * -FDT_ERR_BADSTATE,
730 * -FDT_ERR_BADSTRUCTURE,
731 * -FDT_ERR_TRUNCATED, standard meanings
732 */
733#ifndef SWIG /* This function is not useful in Python */
734const void *fdt_getprop_by_offset(const void *fdt, int offset,
735 const char **namep, int *lenp);
736#endif
737
738/**
739 * fdt_getprop_namelen - get property value based on substring
740 * @fdt: pointer to the device tree blob
741 * @nodeoffset: offset of the node whose property to find
742 * @name: name of the property to find
743 * @namelen: number of characters of name to consider
744 * @lenp: pointer to an integer variable (will be overwritten) or NULL
745 *
746 * Identical to fdt_getprop(), but only examine the first namelen
747 * characters of name for matching the property name.
748 */
749#ifndef SWIG /* Not available in Python */
750const void *fdt_getprop_namelen(const void *fdt, int nodeoffset,
751 const char *name, int namelen, int *lenp);
752static inline void *fdt_getprop_namelen_w(void *fdt, int nodeoffset,
753 const char *name, int namelen,
754 int *lenp)
755{
756 return (void *)(uintptr_t)fdt_getprop_namelen(fdt, nodeoffset, name,
757 namelen, lenp);
758}
759#endif
760
761/**
762 * fdt_getprop - retrieve the value of a given property
763 * @fdt: pointer to the device tree blob
764 * @nodeoffset: offset of the node whose property to find
765 * @name: name of the property to find
766 * @lenp: pointer to an integer variable (will be overwritten) or NULL
767 *
768 * fdt_getprop() retrieves a pointer to the value of the property
769 * named 'name' of the node at offset nodeoffset (this will be a
770 * pointer to within the device blob itself, not a copy of the value).
771 * If lenp is non-NULL, the length of the property value is also
772 * returned, in the integer pointed to by lenp.
773 *
774 * returns:
775 * pointer to the property's value
776 * if lenp is non-NULL, *lenp contains the length of the property
777 * value (>=0)
778 * NULL, on error
779 * if lenp is non-NULL, *lenp contains an error code (<0):
780 * -FDT_ERR_NOTFOUND, node does not have named property
781 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE
782 * tag
783 * -FDT_ERR_BADMAGIC,
784 * -FDT_ERR_BADVERSION,
785 * -FDT_ERR_BADSTATE,
786 * -FDT_ERR_BADSTRUCTURE,
787 * -FDT_ERR_TRUNCATED, standard meanings
788 */
789const void *fdt_getprop(const void *fdt, int nodeoffset,
790 const char *name, int *lenp);
791static inline void *fdt_getprop_w(void *fdt, int nodeoffset,
792 const char *name, int *lenp)
793{
794 return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp);
795}
796
797/**
798 * fdt_get_phandle - retrieve the phandle of a given node
799 * @fdt: pointer to the device tree blob
800 * @nodeoffset: structure block offset of the node
801 *
802 * fdt_get_phandle() retrieves the phandle of the device tree node at
803 * structure block offset nodeoffset.
804 *
805 * returns:
806 * the phandle of the node at nodeoffset, on success (!= 0, != -1)
807 * 0, if the node has no phandle, or another error occurs
808 */
809uint32_t fdt_get_phandle(const void *fdt, int nodeoffset);
810
811/**
812 * fdt_get_alias_namelen - get alias based on substring
813 * @fdt: pointer to the device tree blob
814 * @name: name of the alias th look up
815 * @namelen: number of characters of name to consider
816 *
817 * Identical to fdt_get_alias(), but only examine the first namelen
818 * characters of name for matching the alias name.
819 */
820#ifndef SWIG /* Not available in Python */
821const char *fdt_get_alias_namelen(const void *fdt,
822 const char *name, int namelen);
823#endif
824
825/**
826 * fdt_get_alias - retrieve the path referenced by a given alias
827 * @fdt: pointer to the device tree blob
828 * @name: name of the alias th look up
829 *
830 * fdt_get_alias() retrieves the value of a given alias. That is, the
831 * value of the property named 'name' in the node /aliases.
832 *
833 * returns:
834 * a pointer to the expansion of the alias named 'name', if it exists
835 * NULL, if the given alias or the /aliases node does not exist
836 */
837const char *fdt_get_alias(const void *fdt, const char *name);
838
839/**
840 * fdt_get_path - determine the full path of a node
841 * @fdt: pointer to the device tree blob
842 * @nodeoffset: offset of the node whose path to find
843 * @buf: character buffer to contain the returned path (will be overwritten)
844 * @buflen: size of the character buffer at buf
845 *
846 * fdt_get_path() computes the full path of the node at offset
847 * nodeoffset, and records that path in the buffer at buf.
848 *
849 * NOTE: This function is expensive, as it must scan the device tree
850 * structure from the start to nodeoffset.
851 *
852 * returns:
853 * 0, on success
854 * buf contains the absolute path of the node at
855 * nodeoffset, as a NUL-terminated string.
856 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
857 * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1)
858 * characters and will not fit in the given buffer.
859 * -FDT_ERR_BADMAGIC,
860 * -FDT_ERR_BADVERSION,
861 * -FDT_ERR_BADSTATE,
862 * -FDT_ERR_BADSTRUCTURE, standard meanings
863 */
864int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen);
865
866/**
867 * fdt_supernode_atdepth_offset - find a specific ancestor of a node
868 * @fdt: pointer to the device tree blob
869 * @nodeoffset: offset of the node whose parent to find
870 * @supernodedepth: depth of the ancestor to find
871 * @nodedepth: pointer to an integer variable (will be overwritten) or NULL
872 *
873 * fdt_supernode_atdepth_offset() finds an ancestor of the given node
874 * at a specific depth from the root (where the root itself has depth
875 * 0, its immediate subnodes depth 1 and so forth). So
876 * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL);
877 * will always return 0, the offset of the root node. If the node at
878 * nodeoffset has depth D, then:
879 * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL);
880 * will return nodeoffset itself.
881 *
882 * NOTE: This function is expensive, as it must scan the device tree
883 * structure from the start to nodeoffset.
884 *
885 * returns:
886 * structure block offset of the node at node offset's ancestor
887 * of depth supernodedepth (>=0), on success
888 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
889 * -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of
890 * nodeoffset
891 * -FDT_ERR_BADMAGIC,
892 * -FDT_ERR_BADVERSION,
893 * -FDT_ERR_BADSTATE,
894 * -FDT_ERR_BADSTRUCTURE, standard meanings
895 */
896int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
897 int supernodedepth, int *nodedepth);
898
899/**
900 * fdt_node_depth - find the depth of a given node
901 * @fdt: pointer to the device tree blob
902 * @nodeoffset: offset of the node whose parent to find
903 *
904 * fdt_node_depth() finds the depth of a given node. The root node
905 * has depth 0, its immediate subnodes depth 1 and so forth.
906 *
907 * NOTE: This function is expensive, as it must scan the device tree
908 * structure from the start to nodeoffset.
909 *
910 * returns:
911 * depth of the node at nodeoffset (>=0), on success
912 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
913 * -FDT_ERR_BADMAGIC,
914 * -FDT_ERR_BADVERSION,
915 * -FDT_ERR_BADSTATE,
916 * -FDT_ERR_BADSTRUCTURE, standard meanings
917 */
918int fdt_node_depth(const void *fdt, int nodeoffset);
919
920/**
921 * fdt_parent_offset - find the parent of a given node
922 * @fdt: pointer to the device tree blob
923 * @nodeoffset: offset of the node whose parent to find
924 *
925 * fdt_parent_offset() locates the parent node of a given node (that
926 * is, it finds the offset of the node which contains the node at
927 * nodeoffset as a subnode).
928 *
929 * NOTE: This function is expensive, as it must scan the device tree
930 * structure from the start to nodeoffset, *twice*.
931 *
932 * returns:
933 * structure block offset of the parent of the node at nodeoffset
934 * (>=0), on success
935 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
936 * -FDT_ERR_BADMAGIC,
937 * -FDT_ERR_BADVERSION,
938 * -FDT_ERR_BADSTATE,
939 * -FDT_ERR_BADSTRUCTURE, standard meanings
940 */
941int fdt_parent_offset(const void *fdt, int nodeoffset);
942
943/**
944 * fdt_node_offset_by_prop_value - find nodes with a given property value
945 * @fdt: pointer to the device tree blob
946 * @startoffset: only find nodes after this offset
947 * @propname: property name to check
948 * @propval: property value to search for
949 * @proplen: length of the value in propval
950 *
951 * fdt_node_offset_by_prop_value() returns the offset of the first
952 * node after startoffset, which has a property named propname whose
953 * value is of length proplen and has value equal to propval; or if
954 * startoffset is -1, the very first such node in the tree.
955 *
956 * To iterate through all nodes matching the criterion, the following
957 * idiom can be used:
958 * offset = fdt_node_offset_by_prop_value(fdt, -1, propname,
959 * propval, proplen);
960 * while (offset != -FDT_ERR_NOTFOUND) {
961 * // other code here
962 * offset = fdt_node_offset_by_prop_value(fdt, offset, propname,
963 * propval, proplen);
964 * }
965 *
966 * Note the -1 in the first call to the function, if 0 is used here
967 * instead, the function will never locate the root node, even if it
968 * matches the criterion.
969 *
970 * returns:
971 * structure block offset of the located node (>= 0, >startoffset),
972 * on success
973 * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the
974 * tree after startoffset
975 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
976 * -FDT_ERR_BADMAGIC,
977 * -FDT_ERR_BADVERSION,
978 * -FDT_ERR_BADSTATE,
979 * -FDT_ERR_BADSTRUCTURE, standard meanings
980 */
981int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
982 const char *propname,
983 const void *propval, int proplen);
984
985/**
986 * fdt_node_offset_by_phandle - find the node with a given phandle
987 * @fdt: pointer to the device tree blob
988 * @phandle: phandle value
989 *
990 * fdt_node_offset_by_phandle() returns the offset of the node
991 * which has the given phandle value. If there is more than one node
992 * in the tree with the given phandle (an invalid tree), results are
993 * undefined.
994 *
995 * returns:
996 * structure block offset of the located node (>= 0), on success
997 * -FDT_ERR_NOTFOUND, no node with that phandle exists
998 * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1)
999 * -FDT_ERR_BADMAGIC,
1000 * -FDT_ERR_BADVERSION,
1001 * -FDT_ERR_BADSTATE,
1002 * -FDT_ERR_BADSTRUCTURE, standard meanings
1003 */
1004int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle);
1005
1006/**
1007 * fdt_node_check_compatible: check a node's compatible property
1008 * @fdt: pointer to the device tree blob
1009 * @nodeoffset: offset of a tree node
1010 * @compatible: string to match against
1011 *
1012 *
1013 * fdt_node_check_compatible() returns 0 if the given node contains a
1014 * 'compatible' property with the given string as one of its elements,
1015 * it returns non-zero otherwise, or on error.
1016 *
1017 * returns:
1018 * 0, if the node has a 'compatible' property listing the given string
1019 * 1, if the node has a 'compatible' property, but it does not list
1020 * the given string
1021 * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property
1022 * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag
1023 * -FDT_ERR_BADMAGIC,
1024 * -FDT_ERR_BADVERSION,
1025 * -FDT_ERR_BADSTATE,
1026 * -FDT_ERR_BADSTRUCTURE, standard meanings
1027 */
1028int fdt_node_check_compatible(const void *fdt, int nodeoffset,
1029 const char *compatible);
1030
1031/**
1032 * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value
1033 * @fdt: pointer to the device tree blob
1034 * @startoffset: only find nodes after this offset
1035 * @compatible: 'compatible' string to match against
1036 *
1037 * fdt_node_offset_by_compatible() returns the offset of the first
1038 * node after startoffset, which has a 'compatible' property which
1039 * lists the given compatible string; or if startoffset is -1, the
1040 * very first such node in the tree.
1041 *
1042 * To iterate through all nodes matching the criterion, the following
1043 * idiom can be used:
1044 * offset = fdt_node_offset_by_compatible(fdt, -1, compatible);
1045 * while (offset != -FDT_ERR_NOTFOUND) {
1046 * // other code here
1047 * offset = fdt_node_offset_by_compatible(fdt, offset, compatible);
1048 * }
1049 *
1050 * Note the -1 in the first call to the function, if 0 is used here
1051 * instead, the function will never locate the root node, even if it
1052 * matches the criterion.
1053 *
1054 * returns:
1055 * structure block offset of the located node (>= 0, >startoffset),
1056 * on success
1057 * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the
1058 * tree after startoffset
1059 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
1060 * -FDT_ERR_BADMAGIC,
1061 * -FDT_ERR_BADVERSION,
1062 * -FDT_ERR_BADSTATE,
1063 * -FDT_ERR_BADSTRUCTURE, standard meanings
1064 */
1065int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
1066 const char *compatible);
1067
1068/**
1069 * fdt_stringlist_contains - check a string list property for a string
1070 * @strlist: Property containing a list of strings to check
1071 * @listlen: Length of property
1072 * @str: String to search for
1073 *
1074 * This is a utility function provided for convenience. The list contains
1075 * one or more strings, each terminated by \0, as is found in a device tree
1076 * "compatible" property.
1077 *
1078 * @return: 1 if the string is found in the list, 0 not found, or invalid list
1079 */
1080int fdt_stringlist_contains(const char *strlist, int listlen, const char *str);
1081
1082/**
1083 * fdt_stringlist_count - count the number of strings in a string list
1084 * @fdt: pointer to the device tree blob
1085 * @nodeoffset: offset of a tree node
1086 * @property: name of the property containing the string list
1087 * @return:
1088 * the number of strings in the given property
1089 * -FDT_ERR_BADVALUE if the property value is not NUL-terminated
1090 * -FDT_ERR_NOTFOUND if the property does not exist
1091 */
1092int fdt_stringlist_count(const void *fdt, int nodeoffset, const char *property);
1093
1094/**
1095 * fdt_stringlist_search - find a string in a string list and return its index
1096 * @fdt: pointer to the device tree blob
1097 * @nodeoffset: offset of a tree node
1098 * @property: name of the property containing the string list
1099 * @string: string to look up in the string list
1100 *
1101 * Note that it is possible for this function to succeed on property values
1102 * that are not NUL-terminated. That's because the function will stop after
1103 * finding the first occurrence of @string. This can for example happen with
1104 * small-valued cell properties, such as #address-cells, when searching for
1105 * the empty string.
1106 *
1107 * @return:
1108 * the index of the string in the list of strings
1109 * -FDT_ERR_BADVALUE if the property value is not NUL-terminated
1110 * -FDT_ERR_NOTFOUND if the property does not exist or does not contain
1111 * the given string
1112 */
1113int fdt_stringlist_search(const void *fdt, int nodeoffset, const char *property,
1114 const char *string);
1115
1116/**
1117 * fdt_stringlist_get() - obtain the string at a given index in a string list
1118 * @fdt: pointer to the device tree blob
1119 * @nodeoffset: offset of a tree node
1120 * @property: name of the property containing the string list
1121 * @index: index of the string to return
1122 * @lenp: return location for the string length or an error code on failure
1123 *
1124 * Note that this will successfully extract strings from properties with
1125 * non-NUL-terminated values. For example on small-valued cell properties
1126 * this function will return the empty string.
1127 *
1128 * If non-NULL, the length of the string (on success) or a negative error-code
1129 * (on failure) will be stored in the integer pointer to by lenp.
1130 *
1131 * @return:
1132 * A pointer to the string at the given index in the string list or NULL on
1133 * failure. On success the length of the string will be stored in the memory
1134 * location pointed to by the lenp parameter, if non-NULL. On failure one of
1135 * the following negative error codes will be returned in the lenp parameter
1136 * (if non-NULL):
1137 * -FDT_ERR_BADVALUE if the property value is not NUL-terminated
1138 * -FDT_ERR_NOTFOUND if the property does not exist
1139 */
1140const char *fdt_stringlist_get(const void *fdt, int nodeoffset,
1141 const char *property, int index,
1142 int *lenp);
1143
1144/**********************************************************************/
1145/* Read-only functions (addressing related) */
1146/**********************************************************************/
1147
1148/**
1149 * FDT_MAX_NCELLS - maximum value for #address-cells and #size-cells
1150 *
1151 * This is the maximum value for #address-cells, #size-cells and
1152 * similar properties that will be processed by libfdt. IEE1275
1153 * requires that OF implementations handle values up to 4.
1154 * Implementations may support larger values, but in practice higher
1155 * values aren't used.
1156 */
1157#define FDT_MAX_NCELLS 4
1158
1159/**
1160 * fdt_address_cells - retrieve address size for a bus represented in the tree
1161 * @fdt: pointer to the device tree blob
1162 * @nodeoffset: offset of the node to find the address size for
1163 *
1164 * When the node has a valid #address-cells property, returns its value.
1165 *
1166 * returns:
1167 * 0 <= n < FDT_MAX_NCELLS, on success
1168 * 2, if the node has no #address-cells property
1169 * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid
1170 * #address-cells property
1171 * -FDT_ERR_BADMAGIC,
1172 * -FDT_ERR_BADVERSION,
1173 * -FDT_ERR_BADSTATE,
1174 * -FDT_ERR_BADSTRUCTURE,
1175 * -FDT_ERR_TRUNCATED, standard meanings
1176 */
1177int fdt_address_cells(const void *fdt, int nodeoffset);
1178
1179/**
1180 * fdt_size_cells - retrieve address range size for a bus represented in the
1181 * tree
1182 * @fdt: pointer to the device tree blob
1183 * @nodeoffset: offset of the node to find the address range size for
1184 *
1185 * When the node has a valid #size-cells property, returns its value.
1186 *
1187 * returns:
1188 * 0 <= n < FDT_MAX_NCELLS, on success
1189 * 1, if the node has no #size-cells property
1190 * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid
1191 * #size-cells property
1192 * -FDT_ERR_BADMAGIC,
1193 * -FDT_ERR_BADVERSION,
1194 * -FDT_ERR_BADSTATE,
1195 * -FDT_ERR_BADSTRUCTURE,
1196 * -FDT_ERR_TRUNCATED, standard meanings
1197 */
1198int fdt_size_cells(const void *fdt, int nodeoffset);
1199
1200
1201/**********************************************************************/
1202/* Write-in-place functions */
1203/**********************************************************************/
1204
1205/**
1206 * fdt_setprop_inplace_namelen_partial - change a property's value,
1207 * but not its size
1208 * @fdt: pointer to the device tree blob
1209 * @nodeoffset: offset of the node whose property to change
1210 * @name: name of the property to change
1211 * @namelen: number of characters of name to consider
1212 * @idx: index of the property to change in the array
1213 * @val: pointer to data to replace the property value with
1214 * @len: length of the property value
1215 *
1216 * Identical to fdt_setprop_inplace(), but modifies the given property
1217 * starting from the given index, and using only the first characters
1218 * of the name. It is useful when you want to manipulate only one value of
1219 * an array and you have a string that doesn't end with \0.
1220 */
1221#ifndef SWIG /* Not available in Python */
1222int fdt_setprop_inplace_namelen_partial(void *fdt, int nodeoffset,
1223 const char *name, int namelen,
1224 uint32_t idx, const void *val,
1225 int len);
1226#endif
1227
1228/**
1229 * fdt_setprop_inplace - change a property's value, but not its size
1230 * @fdt: pointer to the device tree blob
1231 * @nodeoffset: offset of the node whose property to change
1232 * @name: name of the property to change
1233 * @val: pointer to data to replace the property value with
1234 * @len: length of the property value
1235 *
1236 * fdt_setprop_inplace() replaces the value of a given property with
1237 * the data in val, of length len. This function cannot change the
1238 * size of a property, and so will only work if len is equal to the
1239 * current length of the property.
1240 *
1241 * This function will alter only the bytes in the blob which contain
1242 * the given property value, and will not alter or move any other part
1243 * of the tree.
1244 *
1245 * returns:
1246 * 0, on success
1247 * -FDT_ERR_NOSPACE, if len is not equal to the property's current length
1248 * -FDT_ERR_NOTFOUND, node does not have the named property
1249 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1250 * -FDT_ERR_BADMAGIC,
1251 * -FDT_ERR_BADVERSION,
1252 * -FDT_ERR_BADSTATE,
1253 * -FDT_ERR_BADSTRUCTURE,
1254 * -FDT_ERR_TRUNCATED, standard meanings
1255 */
1256#ifndef SWIG /* Not available in Python */
1257int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
1258 const void *val, int len);
1259#endif
1260
1261/**
1262 * fdt_setprop_inplace_u32 - change the value of a 32-bit integer property
1263 * @fdt: pointer to the device tree blob
1264 * @nodeoffset: offset of the node whose property to change
1265 * @name: name of the property to change
1266 * @val: 32-bit integer value to replace the property with
1267 *
1268 * fdt_setprop_inplace_u32() replaces the value of a given property
1269 * with the 32-bit integer value in val, converting val to big-endian
1270 * if necessary. This function cannot change the size of a property,
1271 * and so will only work if the property already exists and has length
1272 * 4.
1273 *
1274 * This function will alter only the bytes in the blob which contain
1275 * the given property value, and will not alter or move any other part
1276 * of the tree.
1277 *
1278 * returns:
1279 * 0, on success
1280 * -FDT_ERR_NOSPACE, if the property's length is not equal to 4
1281 * -FDT_ERR_NOTFOUND, node does not have the named property
1282 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1283 * -FDT_ERR_BADMAGIC,
1284 * -FDT_ERR_BADVERSION,
1285 * -FDT_ERR_BADSTATE,
1286 * -FDT_ERR_BADSTRUCTURE,
1287 * -FDT_ERR_TRUNCATED, standard meanings
1288 */
1289static inline int fdt_setprop_inplace_u32(void *fdt, int nodeoffset,
1290 const char *name, uint32_t val)
1291{
1292 fdt32_t tmp = cpu_to_fdt32(val);
1293 return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp));
1294}
1295
1296/**
1297 * fdt_setprop_inplace_u64 - change the value of a 64-bit integer property
1298 * @fdt: pointer to the device tree blob
1299 * @nodeoffset: offset of the node whose property to change
1300 * @name: name of the property to change
1301 * @val: 64-bit integer value to replace the property with
1302 *
1303 * fdt_setprop_inplace_u64() replaces the value of a given property
1304 * with the 64-bit integer value in val, converting val to big-endian
1305 * if necessary. This function cannot change the size of a property,
1306 * and so will only work if the property already exists and has length
1307 * 8.
1308 *
1309 * This function will alter only the bytes in the blob which contain
1310 * the given property value, and will not alter or move any other part
1311 * of the tree.
1312 *
1313 * returns:
1314 * 0, on success
1315 * -FDT_ERR_NOSPACE, if the property's length is not equal to 8
1316 * -FDT_ERR_NOTFOUND, node does not have the named property
1317 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1318 * -FDT_ERR_BADMAGIC,
1319 * -FDT_ERR_BADVERSION,
1320 * -FDT_ERR_BADSTATE,
1321 * -FDT_ERR_BADSTRUCTURE,
1322 * -FDT_ERR_TRUNCATED, standard meanings
1323 */
1324static inline int fdt_setprop_inplace_u64(void *fdt, int nodeoffset,
1325 const char *name, uint64_t val)
1326{
1327 fdt64_t tmp = cpu_to_fdt64(val);
1328 return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp));
1329}
1330
1331/**
1332 * fdt_setprop_inplace_cell - change the value of a single-cell property
1333 *
1334 * This is an alternative name for fdt_setprop_inplace_u32()
1335 */
1336static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
1337 const char *name, uint32_t val)
1338{
1339 return fdt_setprop_inplace_u32(fdt, nodeoffset, name, val);
1340}
1341
1342/**
1343 * fdt_nop_property - replace a property with nop tags
1344 * @fdt: pointer to the device tree blob
1345 * @nodeoffset: offset of the node whose property to nop
1346 * @name: name of the property to nop
1347 *
1348 * fdt_nop_property() will replace a given property's representation
1349 * in the blob with FDT_NOP tags, effectively removing it from the
1350 * tree.
1351 *
1352 * This function will alter only the bytes in the blob which contain
1353 * the property, and will not alter or move any other part of the
1354 * tree.
1355 *
1356 * returns:
1357 * 0, on success
1358 * -FDT_ERR_NOTFOUND, node does not have the named property
1359 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1360 * -FDT_ERR_BADMAGIC,
1361 * -FDT_ERR_BADVERSION,
1362 * -FDT_ERR_BADSTATE,
1363 * -FDT_ERR_BADSTRUCTURE,
1364 * -FDT_ERR_TRUNCATED, standard meanings
1365 */
1366int fdt_nop_property(void *fdt, int nodeoffset, const char *name);
1367
1368/**
1369 * fdt_nop_node - replace a node (subtree) with nop tags
1370 * @fdt: pointer to the device tree blob
1371 * @nodeoffset: offset of the node to nop
1372 *
1373 * fdt_nop_node() will replace a given node's representation in the
1374 * blob, including all its subnodes, if any, with FDT_NOP tags,
1375 * effectively removing it from the tree.
1376 *
1377 * This function will alter only the bytes in the blob which contain
1378 * the node and its properties and subnodes, and will not alter or
1379 * move any other part of the tree.
1380 *
1381 * returns:
1382 * 0, on success
1383 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1384 * -FDT_ERR_BADMAGIC,
1385 * -FDT_ERR_BADVERSION,
1386 * -FDT_ERR_BADSTATE,
1387 * -FDT_ERR_BADSTRUCTURE,
1388 * -FDT_ERR_TRUNCATED, standard meanings
1389 */
1390int fdt_nop_node(void *fdt, int nodeoffset);
1391
1392/**********************************************************************/
1393/* Sequential write functions */
1394/**********************************************************************/
1395
1396/* fdt_create_with_flags flags */
1397#define FDT_CREATE_FLAG_NO_NAME_DEDUP 0x1
1398 /* FDT_CREATE_FLAG_NO_NAME_DEDUP: Do not try to de-duplicate property
1399 * names in the fdt. This can result in faster creation times, but
1400 * a larger fdt. */
1401
1402#define FDT_CREATE_FLAGS_ALL (FDT_CREATE_FLAG_NO_NAME_DEDUP)
1403
1404/**
1405 * fdt_create_with_flags - begin creation of a new fdt
1406 * @fdt: pointer to memory allocated where fdt will be created
1407 * @bufsize: size of the memory space at fdt
1408 * @flags: a valid combination of FDT_CREATE_FLAG_ flags, or 0.
1409 *
1410 * fdt_create_with_flags() begins the process of creating a new fdt with
1411 * the sequential write interface.
1412 *
1413 * fdt creation process must end with fdt_finished() to produce a valid fdt.
1414 *
1415 * returns:
1416 * 0, on success
1417 * -FDT_ERR_NOSPACE, bufsize is insufficient for a minimal fdt
1418 * -FDT_ERR_BADFLAGS, flags is not valid
1419 */
1420int fdt_create_with_flags(void *buf, int bufsize, uint32_t flags);
1421
1422/**
1423 * fdt_create - begin creation of a new fdt
1424 * @fdt: pointer to memory allocated where fdt will be created
1425 * @bufsize: size of the memory space at fdt
1426 *
1427 * fdt_create() is equivalent to fdt_create_with_flags() with flags=0.
1428 *
1429 * returns:
1430 * 0, on success
1431 * -FDT_ERR_NOSPACE, bufsize is insufficient for a minimal fdt
1432 */
1433int fdt_create(void *buf, int bufsize);
1434
1435int fdt_resize(void *fdt, void *buf, int bufsize);
1436int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size);
1437int fdt_finish_reservemap(void *fdt);
1438int fdt_begin_node(void *fdt, const char *name);
1439int fdt_property(void *fdt, const char *name, const void *val, int len);
1440static inline int fdt_property_u32(void *fdt, const char *name, uint32_t val)
1441{
1442 fdt32_t tmp = cpu_to_fdt32(val);
1443 return fdt_property(fdt, name, &tmp, sizeof(tmp));
1444}
1445static inline int fdt_property_u64(void *fdt, const char *name, uint64_t val)
1446{
1447 fdt64_t tmp = cpu_to_fdt64(val);
1448 return fdt_property(fdt, name, &tmp, sizeof(tmp));
1449}
1450
1451#ifndef SWIG /* Not available in Python */
1452static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val)
1453{
1454 return fdt_property_u32(fdt, name, val);
1455}
1456#endif
1457
1458/**
1459 * fdt_property_placeholder - add a new property and return a ptr to its value
1460 *
1461 * @fdt: pointer to the device tree blob
1462 * @name: name of property to add
1463 * @len: length of property value in bytes
1464 * @valp: returns a pointer to where where the value should be placed
1465 *
1466 * returns:
1467 * 0, on success
1468 * -FDT_ERR_BADMAGIC,
1469 * -FDT_ERR_NOSPACE, standard meanings
1470 */
1471int fdt_property_placeholder(void *fdt, const char *name, int len, void **valp);
1472
1473#define fdt_property_string(fdt, name, str) \
1474 fdt_property(fdt, name, str, strlen(str)+1)
1475int fdt_end_node(void *fdt);
1476int fdt_finish(void *fdt);
1477
1478/**********************************************************************/
1479/* Read-write functions */
1480/**********************************************************************/
1481
1482int fdt_create_empty_tree(void *buf, int bufsize);
1483int fdt_open_into(const void *fdt, void *buf, int bufsize);
1484int fdt_pack(void *fdt);
1485
1486/**
1487 * fdt_add_mem_rsv - add one memory reserve map entry
1488 * @fdt: pointer to the device tree blob
1489 * @address, @size: 64-bit values (native endian)
1490 *
1491 * Adds a reserve map entry to the given blob reserving a region at
1492 * address address of length size.
1493 *
1494 * This function will insert data into the reserve map and will
1495 * therefore change the indexes of some entries in the table.
1496 *
1497 * returns:
1498 * 0, on success
1499 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1500 * contain the new reservation entry
1501 * -FDT_ERR_BADMAGIC,
1502 * -FDT_ERR_BADVERSION,
1503 * -FDT_ERR_BADSTATE,
1504 * -FDT_ERR_BADSTRUCTURE,
1505 * -FDT_ERR_BADLAYOUT,
1506 * -FDT_ERR_TRUNCATED, standard meanings
1507 */
1508int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size);
1509
1510/**
1511 * fdt_del_mem_rsv - remove a memory reserve map entry
1512 * @fdt: pointer to the device tree blob
1513 * @n: entry to remove
1514 *
1515 * fdt_del_mem_rsv() removes the n-th memory reserve map entry from
1516 * the blob.
1517 *
1518 * This function will delete data from the reservation table and will
1519 * therefore change the indexes of some entries in the table.
1520 *
1521 * returns:
1522 * 0, on success
1523 * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there
1524 * are less than n+1 reserve map entries)
1525 * -FDT_ERR_BADMAGIC,
1526 * -FDT_ERR_BADVERSION,
1527 * -FDT_ERR_BADSTATE,
1528 * -FDT_ERR_BADSTRUCTURE,
1529 * -FDT_ERR_BADLAYOUT,
1530 * -FDT_ERR_TRUNCATED, standard meanings
1531 */
1532int fdt_del_mem_rsv(void *fdt, int n);
1533
1534/**
1535 * fdt_set_name - change the name of a given node
1536 * @fdt: pointer to the device tree blob
1537 * @nodeoffset: structure block offset of a node
1538 * @name: name to give the node
1539 *
1540 * fdt_set_name() replaces the name (including unit address, if any)
1541 * of the given node with the given string. NOTE: this function can't
1542 * efficiently check if the new name is unique amongst the given
1543 * node's siblings; results are undefined if this function is invoked
1544 * with a name equal to one of the given node's siblings.
1545 *
1546 * This function may insert or delete data from the blob, and will
1547 * therefore change the offsets of some existing nodes.
1548 *
1549 * returns:
1550 * 0, on success
1551 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob
1552 * to contain the new name
1553 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1554 * -FDT_ERR_BADMAGIC,
1555 * -FDT_ERR_BADVERSION,
1556 * -FDT_ERR_BADSTATE, standard meanings
1557 */
1558int fdt_set_name(void *fdt, int nodeoffset, const char *name);
1559
1560/**
1561 * fdt_setprop - create or change a property
1562 * @fdt: pointer to the device tree blob
1563 * @nodeoffset: offset of the node whose property to change
1564 * @name: name of the property to change
1565 * @val: pointer to data to set the property value to
1566 * @len: length of the property value
1567 *
1568 * fdt_setprop() sets the value of the named property in the given
1569 * node to the given value and length, creating the property if it
1570 * does not already exist.
1571 *
1572 * This function may insert or delete data from the blob, and will
1573 * therefore change the offsets of some existing nodes.
1574 *
1575 * returns:
1576 * 0, on success
1577 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1578 * contain the new property value
1579 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1580 * -FDT_ERR_BADLAYOUT,
1581 * -FDT_ERR_BADMAGIC,
1582 * -FDT_ERR_BADVERSION,
1583 * -FDT_ERR_BADSTATE,
1584 * -FDT_ERR_BADSTRUCTURE,
1585 * -FDT_ERR_BADLAYOUT,
1586 * -FDT_ERR_TRUNCATED, standard meanings
1587 */
1588int fdt_setprop(void *fdt, int nodeoffset, const char *name,
1589 const void *val, int len);
1590
1591/**
1592 * fdt_setprop_placeholder - allocate space for a property
1593 * @fdt: pointer to the device tree blob
1594 * @nodeoffset: offset of the node whose property to change
1595 * @name: name of the property to change
1596 * @len: length of the property value
1597 * @prop_data: return pointer to property data
1598 *
1599 * fdt_setprop_placeholer() allocates the named property in the given node.
1600 * If the property exists it is resized. In either case a pointer to the
1601 * property data is returned.
1602 *
1603 * This function may insert or delete data from the blob, and will
1604 * therefore change the offsets of some existing nodes.
1605 *
1606 * returns:
1607 * 0, on success
1608 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1609 * contain the new property value
1610 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1611 * -FDT_ERR_BADLAYOUT,
1612 * -FDT_ERR_BADMAGIC,
1613 * -FDT_ERR_BADVERSION,
1614 * -FDT_ERR_BADSTATE,
1615 * -FDT_ERR_BADSTRUCTURE,
1616 * -FDT_ERR_BADLAYOUT,
1617 * -FDT_ERR_TRUNCATED, standard meanings
1618 */
1619int fdt_setprop_placeholder(void *fdt, int nodeoffset, const char *name,
1620 int len, void **prop_data);
1621
1622/**
1623 * fdt_setprop_u32 - set a property to a 32-bit integer
1624 * @fdt: pointer to the device tree blob
1625 * @nodeoffset: offset of the node whose property to change
1626 * @name: name of the property to change
1627 * @val: 32-bit integer value for the property (native endian)
1628 *
1629 * fdt_setprop_u32() sets the value of the named property in the given
1630 * node to the given 32-bit integer value (converting to big-endian if
1631 * necessary), or creates a new property with that value if it does
1632 * not already exist.
1633 *
1634 * This function may insert or delete data from the blob, and will
1635 * therefore change the offsets of some existing nodes.
1636 *
1637 * returns:
1638 * 0, on success
1639 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1640 * contain the new property value
1641 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1642 * -FDT_ERR_BADLAYOUT,
1643 * -FDT_ERR_BADMAGIC,
1644 * -FDT_ERR_BADVERSION,
1645 * -FDT_ERR_BADSTATE,
1646 * -FDT_ERR_BADSTRUCTURE,
1647 * -FDT_ERR_BADLAYOUT,
1648 * -FDT_ERR_TRUNCATED, standard meanings
1649 */
1650static inline int fdt_setprop_u32(void *fdt, int nodeoffset, const char *name,
1651 uint32_t val)
1652{
1653 fdt32_t tmp = cpu_to_fdt32(val);
1654 return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
1655}
1656
1657/**
1658 * fdt_setprop_u64 - set a property to a 64-bit integer
1659 * @fdt: pointer to the device tree blob
1660 * @nodeoffset: offset of the node whose property to change
1661 * @name: name of the property to change
1662 * @val: 64-bit integer value for the property (native endian)
1663 *
1664 * fdt_setprop_u64() sets the value of the named property in the given
1665 * node to the given 64-bit integer value (converting to big-endian if
1666 * necessary), or creates a new property with that value if it does
1667 * not already exist.
1668 *
1669 * This function may insert or delete data from the blob, and will
1670 * therefore change the offsets of some existing nodes.
1671 *
1672 * returns:
1673 * 0, on success
1674 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1675 * contain the new property value
1676 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1677 * -FDT_ERR_BADLAYOUT,
1678 * -FDT_ERR_BADMAGIC,
1679 * -FDT_ERR_BADVERSION,
1680 * -FDT_ERR_BADSTATE,
1681 * -FDT_ERR_BADSTRUCTURE,
1682 * -FDT_ERR_BADLAYOUT,
1683 * -FDT_ERR_TRUNCATED, standard meanings
1684 */
1685static inline int fdt_setprop_u64(void *fdt, int nodeoffset, const char *name,
1686 uint64_t val)
1687{
1688 fdt64_t tmp = cpu_to_fdt64(val);
1689 return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
1690}
1691
1692/**
1693 * fdt_setprop_cell - set a property to a single cell value
1694 *
1695 * This is an alternative name for fdt_setprop_u32()
1696 */
1697static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
1698 uint32_t val)
1699{
1700 return fdt_setprop_u32(fdt, nodeoffset, name, val);
1701}
1702
1703/**
1704 * fdt_setprop_string - set a property to a string value
1705 * @fdt: pointer to the device tree blob
1706 * @nodeoffset: offset of the node whose property to change
1707 * @name: name of the property to change
1708 * @str: string value for the property
1709 *
1710 * fdt_setprop_string() sets the value of the named property in the
1711 * given node to the given string value (using the length of the
1712 * string to determine the new length of the property), or creates a
1713 * new property with that value if it does not already exist.
1714 *
1715 * This function may insert or delete data from the blob, and will
1716 * therefore change the offsets of some existing nodes.
1717 *
1718 * returns:
1719 * 0, on success
1720 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1721 * contain the new property value
1722 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1723 * -FDT_ERR_BADLAYOUT,
1724 * -FDT_ERR_BADMAGIC,
1725 * -FDT_ERR_BADVERSION,
1726 * -FDT_ERR_BADSTATE,
1727 * -FDT_ERR_BADSTRUCTURE,
1728 * -FDT_ERR_BADLAYOUT,
1729 * -FDT_ERR_TRUNCATED, standard meanings
1730 */
1731#define fdt_setprop_string(fdt, nodeoffset, name, str) \
1732 fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
1733
1734
1735/**
1736 * fdt_setprop_empty - set a property to an empty value
1737 * @fdt: pointer to the device tree blob
1738 * @nodeoffset: offset of the node whose property to change
1739 * @name: name of the property to change
1740 *
1741 * fdt_setprop_empty() sets the value of the named property in the
1742 * given node to an empty (zero length) value, or creates a new empty
1743 * property if it does not already exist.
1744 *
1745 * This function may insert or delete data from the blob, and will
1746 * therefore change the offsets of some existing nodes.
1747 *
1748 * returns:
1749 * 0, on success
1750 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1751 * contain the new property value
1752 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1753 * -FDT_ERR_BADLAYOUT,
1754 * -FDT_ERR_BADMAGIC,
1755 * -FDT_ERR_BADVERSION,
1756 * -FDT_ERR_BADSTATE,
1757 * -FDT_ERR_BADSTRUCTURE,
1758 * -FDT_ERR_BADLAYOUT,
1759 * -FDT_ERR_TRUNCATED, standard meanings
1760 */
1761#define fdt_setprop_empty(fdt, nodeoffset, name) \
1762 fdt_setprop((fdt), (nodeoffset), (name), NULL, 0)
1763
1764/**
1765 * fdt_appendprop - append to or create a property
1766 * @fdt: pointer to the device tree blob
1767 * @nodeoffset: offset of the node whose property to change
1768 * @name: name of the property to append to
1769 * @val: pointer to data to append to the property value
1770 * @len: length of the data to append to the property value
1771 *
1772 * fdt_appendprop() appends the value to the named property in the
1773 * given node, creating the property if it does not already exist.
1774 *
1775 * This function may insert data into the blob, and will therefore
1776 * change the offsets of some existing nodes.
1777 *
1778 * returns:
1779 * 0, on success
1780 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1781 * contain the new property value
1782 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1783 * -FDT_ERR_BADLAYOUT,
1784 * -FDT_ERR_BADMAGIC,
1785 * -FDT_ERR_BADVERSION,
1786 * -FDT_ERR_BADSTATE,
1787 * -FDT_ERR_BADSTRUCTURE,
1788 * -FDT_ERR_BADLAYOUT,
1789 * -FDT_ERR_TRUNCATED, standard meanings
1790 */
1791int fdt_appendprop(void *fdt, int nodeoffset, const char *name,
1792 const void *val, int len);
1793
1794/**
1795 * fdt_appendprop_u32 - append a 32-bit integer value to a property
1796 * @fdt: pointer to the device tree blob
1797 * @nodeoffset: offset of the node whose property to change
1798 * @name: name of the property to change
1799 * @val: 32-bit integer value to append to the property (native endian)
1800 *
1801 * fdt_appendprop_u32() appends the given 32-bit integer value
1802 * (converting to big-endian if necessary) to the value of the named
1803 * property in the given node, or creates a new property with that
1804 * value if it does not already exist.
1805 *
1806 * This function may insert data into the blob, and will therefore
1807 * change the offsets of some existing nodes.
1808 *
1809 * returns:
1810 * 0, on success
1811 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1812 * contain the new property value
1813 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1814 * -FDT_ERR_BADLAYOUT,
1815 * -FDT_ERR_BADMAGIC,
1816 * -FDT_ERR_BADVERSION,
1817 * -FDT_ERR_BADSTATE,
1818 * -FDT_ERR_BADSTRUCTURE,
1819 * -FDT_ERR_BADLAYOUT,
1820 * -FDT_ERR_TRUNCATED, standard meanings
1821 */
1822static inline int fdt_appendprop_u32(void *fdt, int nodeoffset,
1823 const char *name, uint32_t val)
1824{
1825 fdt32_t tmp = cpu_to_fdt32(val);
1826 return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
1827}
1828
1829/**
1830 * fdt_appendprop_u64 - append a 64-bit integer value to a property
1831 * @fdt: pointer to the device tree blob
1832 * @nodeoffset: offset of the node whose property to change
1833 * @name: name of the property to change
1834 * @val: 64-bit integer value to append to the property (native endian)
1835 *
1836 * fdt_appendprop_u64() appends the given 64-bit integer value
1837 * (converting to big-endian if necessary) to the value of the named
1838 * property in the given node, or creates a new property with that
1839 * value if it does not already exist.
1840 *
1841 * This function may insert data into the blob, and will therefore
1842 * change the offsets of some existing nodes.
1843 *
1844 * returns:
1845 * 0, on success
1846 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1847 * contain the new property value
1848 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1849 * -FDT_ERR_BADLAYOUT,
1850 * -FDT_ERR_BADMAGIC,
1851 * -FDT_ERR_BADVERSION,
1852 * -FDT_ERR_BADSTATE,
1853 * -FDT_ERR_BADSTRUCTURE,
1854 * -FDT_ERR_BADLAYOUT,
1855 * -FDT_ERR_TRUNCATED, standard meanings
1856 */
1857static inline int fdt_appendprop_u64(void *fdt, int nodeoffset,
1858 const char *name, uint64_t val)
1859{
1860 fdt64_t tmp = cpu_to_fdt64(val);
1861 return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
1862}
1863
1864/**
1865 * fdt_appendprop_cell - append a single cell value to a property
1866 *
1867 * This is an alternative name for fdt_appendprop_u32()
1868 */
1869static inline int fdt_appendprop_cell(void *fdt, int nodeoffset,
1870 const char *name, uint32_t val)
1871{
1872 return fdt_appendprop_u32(fdt, nodeoffset, name, val);
1873}
1874
1875/**
1876 * fdt_appendprop_string - append a string to a property
1877 * @fdt: pointer to the device tree blob
1878 * @nodeoffset: offset of the node whose property to change
1879 * @name: name of the property to change
1880 * @str: string value to append to the property
1881 *
1882 * fdt_appendprop_string() appends the given string to the value of
1883 * the named property in the given node, or creates a new property
1884 * with that value if it does not already exist.
1885 *
1886 * This function may insert data into the blob, and will therefore
1887 * change the offsets of some existing nodes.
1888 *
1889 * returns:
1890 * 0, on success
1891 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1892 * contain the new property value
1893 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1894 * -FDT_ERR_BADLAYOUT,
1895 * -FDT_ERR_BADMAGIC,
1896 * -FDT_ERR_BADVERSION,
1897 * -FDT_ERR_BADSTATE,
1898 * -FDT_ERR_BADSTRUCTURE,
1899 * -FDT_ERR_BADLAYOUT,
1900 * -FDT_ERR_TRUNCATED, standard meanings
1901 */
1902#define fdt_appendprop_string(fdt, nodeoffset, name, str) \
1903 fdt_appendprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
1904
1905/**
1906 * fdt_appendprop_addrrange - append a address range property
1907 * @fdt: pointer to the device tree blob
1908 * @parent: offset of the parent node
1909 * @nodeoffset: offset of the node to add a property at
1910 * @name: name of property
1911 * @addr: start address of a given range
1912 * @size: size of a given range
1913 *
1914 * fdt_appendprop_addrrange() appends an address range value (start
1915 * address and size) to the value of the named property in the given
1916 * node, or creates a new property with that value if it does not
1917 * already exist.
1918 * If "name" is not specified, a default "reg" is used.
1919 * Cell sizes are determined by parent's #address-cells and #size-cells.
1920 *
1921 * This function may insert data into the blob, and will therefore
1922 * change the offsets of some existing nodes.
1923 *
1924 * returns:
1925 * 0, on success
1926 * -FDT_ERR_BADLAYOUT,
1927 * -FDT_ERR_BADMAGIC,
1928 * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid
1929 * #address-cells property
1930 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1931 * -FDT_ERR_BADSTATE,
1932 * -FDT_ERR_BADSTRUCTURE,
1933 * -FDT_ERR_BADVERSION,
1934 * -FDT_ERR_BADVALUE, addr or size doesn't fit to respective cells size
1935 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
1936 * contain a new property
1937 * -FDT_ERR_TRUNCATED, standard meanings
1938 */
1939int fdt_appendprop_addrrange(void *fdt, int parent, int nodeoffset,
1940 const char *name, uint64_t addr, uint64_t size);
1941
1942/**
1943 * fdt_delprop - delete a property
1944 * @fdt: pointer to the device tree blob
1945 * @nodeoffset: offset of the node whose property to nop
1946 * @name: name of the property to nop
1947 *
1948 * fdt_del_property() will delete the given property.
1949 *
1950 * This function will delete data from the blob, and will therefore
1951 * change the offsets of some existing nodes.
1952 *
1953 * returns:
1954 * 0, on success
1955 * -FDT_ERR_NOTFOUND, node does not have the named property
1956 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
1957 * -FDT_ERR_BADLAYOUT,
1958 * -FDT_ERR_BADMAGIC,
1959 * -FDT_ERR_BADVERSION,
1960 * -FDT_ERR_BADSTATE,
1961 * -FDT_ERR_BADSTRUCTURE,
1962 * -FDT_ERR_TRUNCATED, standard meanings
1963 */
1964int fdt_delprop(void *fdt, int nodeoffset, const char *name);
1965
1966/**
1967 * fdt_add_subnode_namelen - creates a new node based on substring
1968 * @fdt: pointer to the device tree blob
1969 * @parentoffset: structure block offset of a node
1970 * @name: name of the subnode to locate
1971 * @namelen: number of characters of name to consider
1972 *
1973 * Identical to fdt_add_subnode(), but use only the first namelen
1974 * characters of name as the name of the new node. This is useful for
1975 * creating subnodes based on a portion of a larger string, such as a
1976 * full path.
1977 */
1978#ifndef SWIG /* Not available in Python */
1979int fdt_add_subnode_namelen(void *fdt, int parentoffset,
1980 const char *name, int namelen);
1981#endif
1982
1983/**
1984 * fdt_add_subnode - creates a new node
1985 * @fdt: pointer to the device tree blob
1986 * @parentoffset: structure block offset of a node
1987 * @name: name of the subnode to locate
1988 *
1989 * fdt_add_subnode() creates a new node as a subnode of the node at
1990 * structure block offset parentoffset, with the given name (which
1991 * should include the unit address, if any).
1992 *
1993 * This function will insert data into the blob, and will therefore
1994 * change the offsets of some existing nodes.
1995
1996 * returns:
1997 * structure block offset of the created nodeequested subnode (>=0), on
1998 * success
1999 * -FDT_ERR_NOTFOUND, if the requested subnode does not exist
2000 * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE
2001 * tag
2002 * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of
2003 * the given name
2004 * -FDT_ERR_NOSPACE, if there is insufficient free space in the
2005 * blob to contain the new node
2006 * -FDT_ERR_NOSPACE
2007 * -FDT_ERR_BADLAYOUT
2008 * -FDT_ERR_BADMAGIC,
2009 * -FDT_ERR_BADVERSION,
2010 * -FDT_ERR_BADSTATE,
2011 * -FDT_ERR_BADSTRUCTURE,
2012 * -FDT_ERR_TRUNCATED, standard meanings.
2013 */
2014int fdt_add_subnode(void *fdt, int parentoffset, const char *name);
2015
2016/**
2017 * fdt_del_node - delete a node (subtree)
2018 * @fdt: pointer to the device tree blob
2019 * @nodeoffset: offset of the node to nop
2020 *
2021 * fdt_del_node() will remove the given node, including all its
2022 * subnodes if any, from the blob.
2023 *
2024 * This function will delete data from the blob, and will therefore
2025 * change the offsets of some existing nodes.
2026 *
2027 * returns:
2028 * 0, on success
2029 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
2030 * -FDT_ERR_BADLAYOUT,
2031 * -FDT_ERR_BADMAGIC,
2032 * -FDT_ERR_BADVERSION,
2033 * -FDT_ERR_BADSTATE,
2034 * -FDT_ERR_BADSTRUCTURE,
2035 * -FDT_ERR_TRUNCATED, standard meanings
2036 */
2037int fdt_del_node(void *fdt, int nodeoffset);
2038
2039/**
2040 * fdt_overlay_apply - Applies a DT overlay on a base DT
2041 * @fdt: pointer to the base device tree blob
2042 * @fdto: pointer to the device tree overlay blob
2043 *
2044 * fdt_overlay_apply() will apply the given device tree overlay on the
2045 * given base device tree.
2046 *
2047 * Expect the base device tree to be modified, even if the function
2048 * returns an error.
2049 *
2050 * returns:
2051 * 0, on success
2052 * -FDT_ERR_NOSPACE, there's not enough space in the base device tree
2053 * -FDT_ERR_NOTFOUND, the overlay points to some inexistant nodes or
2054 * properties in the base DT
2055 * -FDT_ERR_BADPHANDLE,
2056 * -FDT_ERR_BADOVERLAY,
2057 * -FDT_ERR_NOPHANDLES,
2058 * -FDT_ERR_INTERNAL,
2059 * -FDT_ERR_BADLAYOUT,
2060 * -FDT_ERR_BADMAGIC,
2061 * -FDT_ERR_BADOFFSET,
2062 * -FDT_ERR_BADPATH,
2063 * -FDT_ERR_BADVERSION,
2064 * -FDT_ERR_BADSTRUCTURE,
2065 * -FDT_ERR_BADSTATE,
2066 * -FDT_ERR_TRUNCATED, standard meanings
2067 */
2068int fdt_overlay_apply(void *fdt, void *fdto);
2069
2070/**********************************************************************/
2071/* Debugging / informational functions */
2072/**********************************************************************/
2073
2074const char *fdt_strerror(int errval);
2075
2076#ifdef __cplusplus
2077}
2078#endif
2079
2080#endif /* LIBFDT_H */