Linux Audio

Check our new training course

Loading...
v5.4
  1// SPDX-License-Identifier: GPL-2.0-only
  2/* dummy.c: a dummy net driver
  3
  4	The purpose of this driver is to provide a device to point a
  5	route through, but not to actually transmit packets.
  6
  7	Why?  If you have a machine whose only connection is an occasional
  8	PPP/SLIP/PLIP link, you can only connect to your own hostname
  9	when the link is up.  Otherwise you have to use localhost.
 10	This isn't very consistent.
 11
 12	One solution is to set up a dummy link using PPP/SLIP/PLIP,
 13	but this seems (to me) too much overhead for too little gain.
 14	This driver provides a small alternative. Thus you can do
 15
 16	[when not running slip]
 17		ifconfig dummy slip.addr.ess.here up
 18	[to go to slip]
 19		ifconfig dummy down
 20		dip whatever
 21
 22	This was written by looking at Donald Becker's skeleton driver
 23	and the loopback driver.  I then threw away anything that didn't
 24	apply!	Thanks to Alan Cox for the key clue on what to do with
 25	misguided packets.
 26
 27			Nick Holloway, 27th May 1994
 28	[I tweaked this explanation a little but that's all]
 29			Alan Cox, 30th May 1994
 30*/
 31
 32#include <linux/module.h>
 33#include <linux/kernel.h>
 34#include <linux/netdevice.h>
 35#include <linux/etherdevice.h>
 36#include <linux/ethtool.h>
 37#include <linux/init.h>
 38#include <linux/moduleparam.h>
 39#include <linux/rtnetlink.h>
 40#include <linux/net_tstamp.h>
 41#include <net/rtnetlink.h>
 42#include <linux/u64_stats_sync.h>
 43
 44#define DRV_NAME	"dummy"
 45#define DRV_VERSION	"1.0"
 46
 47static int numdummies = 1;
 48
 49/* fake multicast ability */
 50static void set_multicast_list(struct net_device *dev)
 51{
 52}
 53
 54struct pcpu_dstats {
 55	u64			tx_packets;
 56	u64			tx_bytes;
 57	struct u64_stats_sync	syncp;
 58};
 59
 60static void dummy_get_stats64(struct net_device *dev,
 61			      struct rtnl_link_stats64 *stats)
 62{
 63	int i;
 64
 65	for_each_possible_cpu(i) {
 66		const struct pcpu_dstats *dstats;
 67		u64 tbytes, tpackets;
 68		unsigned int start;
 69
 70		dstats = per_cpu_ptr(dev->dstats, i);
 71		do {
 72			start = u64_stats_fetch_begin_irq(&dstats->syncp);
 73			tbytes = dstats->tx_bytes;
 74			tpackets = dstats->tx_packets;
 75		} while (u64_stats_fetch_retry_irq(&dstats->syncp, start));
 76		stats->tx_bytes += tbytes;
 77		stats->tx_packets += tpackets;
 78	}
 79}
 80
 81static netdev_tx_t dummy_xmit(struct sk_buff *skb, struct net_device *dev)
 82{
 83	struct pcpu_dstats *dstats = this_cpu_ptr(dev->dstats);
 84
 85	u64_stats_update_begin(&dstats->syncp);
 86	dstats->tx_packets++;
 87	dstats->tx_bytes += skb->len;
 88	u64_stats_update_end(&dstats->syncp);
 89
 90	skb_tx_timestamp(skb);
 91	dev_kfree_skb(skb);
 92	return NETDEV_TX_OK;
 93}
 94
 95static int dummy_dev_init(struct net_device *dev)
 96{
 97	dev->dstats = netdev_alloc_pcpu_stats(struct pcpu_dstats);
 98	if (!dev->dstats)
 99		return -ENOMEM;
100
101	return 0;
102}
103
104static void dummy_dev_uninit(struct net_device *dev)
105{
106	free_percpu(dev->dstats);
107}
108
109static int dummy_change_carrier(struct net_device *dev, bool new_carrier)
110{
111	if (new_carrier)
112		netif_carrier_on(dev);
113	else
114		netif_carrier_off(dev);
115	return 0;
116}
117
118static const struct net_device_ops dummy_netdev_ops = {
119	.ndo_init		= dummy_dev_init,
120	.ndo_uninit		= dummy_dev_uninit,
121	.ndo_start_xmit		= dummy_xmit,
122	.ndo_validate_addr	= eth_validate_addr,
123	.ndo_set_rx_mode	= set_multicast_list,
124	.ndo_set_mac_address	= eth_mac_addr,
125	.ndo_get_stats64	= dummy_get_stats64,
126	.ndo_change_carrier	= dummy_change_carrier,
127};
128
129static void dummy_get_drvinfo(struct net_device *dev,
130			      struct ethtool_drvinfo *info)
131{
132	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
133	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
134}
135
136static const struct ethtool_ops dummy_ethtool_ops = {
137	.get_drvinfo            = dummy_get_drvinfo,
138	.get_ts_info		= ethtool_op_get_ts_info,
139};
140
141static void dummy_setup(struct net_device *dev)
142{
143	ether_setup(dev);
144
145	/* Initialize the device structure. */
146	dev->netdev_ops = &dummy_netdev_ops;
147	dev->ethtool_ops = &dummy_ethtool_ops;
148	dev->needs_free_netdev = true;
149
150	/* Fill in device structure with ethernet-generic values. */
151	dev->flags |= IFF_NOARP;
152	dev->flags &= ~IFF_MULTICAST;
153	dev->priv_flags |= IFF_LIVE_ADDR_CHANGE | IFF_NO_QUEUE;
154	dev->features	|= NETIF_F_SG | NETIF_F_FRAGLIST;
155	dev->features	|= NETIF_F_ALL_TSO;
156	dev->features	|= NETIF_F_HW_CSUM | NETIF_F_HIGHDMA | NETIF_F_LLTX;
157	dev->features	|= NETIF_F_GSO_ENCAP_ALL;
158	dev->hw_features |= dev->features;
159	dev->hw_enc_features |= dev->features;
160	eth_hw_addr_random(dev);
161
162	dev->min_mtu = 0;
163	dev->max_mtu = 0;
164}
165
166static int dummy_validate(struct nlattr *tb[], struct nlattr *data[],
167			  struct netlink_ext_ack *extack)
168{
169	if (tb[IFLA_ADDRESS]) {
170		if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
171			return -EINVAL;
172		if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
173			return -EADDRNOTAVAIL;
174	}
175	return 0;
176}
177
178static struct rtnl_link_ops dummy_link_ops __read_mostly = {
179	.kind		= DRV_NAME,
180	.setup		= dummy_setup,
181	.validate	= dummy_validate,
182};
183
184/* Number of dummy devices to be set up by this module. */
185module_param(numdummies, int, 0);
186MODULE_PARM_DESC(numdummies, "Number of dummy pseudo devices");
187
188static int __init dummy_init_one(void)
189{
190	struct net_device *dev_dummy;
191	int err;
192
193	dev_dummy = alloc_netdev(0, "dummy%d", NET_NAME_ENUM, dummy_setup);
194	if (!dev_dummy)
195		return -ENOMEM;
196
197	dev_dummy->rtnl_link_ops = &dummy_link_ops;
198	err = register_netdevice(dev_dummy);
199	if (err < 0)
200		goto err;
201	return 0;
202
203err:
204	free_netdev(dev_dummy);
205	return err;
206}
207
208static int __init dummy_init_module(void)
209{
210	int i, err = 0;
211
212	down_write(&pernet_ops_rwsem);
213	rtnl_lock();
214	err = __rtnl_link_register(&dummy_link_ops);
215	if (err < 0)
216		goto out;
217
218	for (i = 0; i < numdummies && !err; i++) {
219		err = dummy_init_one();
220		cond_resched();
221	}
222	if (err < 0)
223		__rtnl_link_unregister(&dummy_link_ops);
224
225out:
226	rtnl_unlock();
227	up_write(&pernet_ops_rwsem);
228
229	return err;
230}
231
232static void __exit dummy_cleanup_module(void)
233{
234	rtnl_link_unregister(&dummy_link_ops);
235}
236
237module_init(dummy_init_module);
238module_exit(dummy_cleanup_module);
239MODULE_LICENSE("GPL");
240MODULE_ALIAS_RTNL_LINK(DRV_NAME);
241MODULE_VERSION(DRV_VERSION);
v5.9
  1// SPDX-License-Identifier: GPL-2.0-only
  2/* dummy.c: a dummy net driver
  3
  4	The purpose of this driver is to provide a device to point a
  5	route through, but not to actually transmit packets.
  6
  7	Why?  If you have a machine whose only connection is an occasional
  8	PPP/SLIP/PLIP link, you can only connect to your own hostname
  9	when the link is up.  Otherwise you have to use localhost.
 10	This isn't very consistent.
 11
 12	One solution is to set up a dummy link using PPP/SLIP/PLIP,
 13	but this seems (to me) too much overhead for too little gain.
 14	This driver provides a small alternative. Thus you can do
 15
 16	[when not running slip]
 17		ifconfig dummy slip.addr.ess.here up
 18	[to go to slip]
 19		ifconfig dummy down
 20		dip whatever
 21
 22	This was written by looking at Donald Becker's skeleton driver
 23	and the loopback driver.  I then threw away anything that didn't
 24	apply!	Thanks to Alan Cox for the key clue on what to do with
 25	misguided packets.
 26
 27			Nick Holloway, 27th May 1994
 28	[I tweaked this explanation a little but that's all]
 29			Alan Cox, 30th May 1994
 30*/
 31
 32#include <linux/module.h>
 33#include <linux/kernel.h>
 34#include <linux/netdevice.h>
 35#include <linux/etherdevice.h>
 36#include <linux/ethtool.h>
 37#include <linux/init.h>
 38#include <linux/moduleparam.h>
 39#include <linux/rtnetlink.h>
 40#include <linux/net_tstamp.h>
 41#include <net/rtnetlink.h>
 42#include <linux/u64_stats_sync.h>
 43
 44#define DRV_NAME	"dummy"
 
 45
 46static int numdummies = 1;
 47
 48/* fake multicast ability */
 49static void set_multicast_list(struct net_device *dev)
 50{
 51}
 52
 
 
 
 
 
 
 53static void dummy_get_stats64(struct net_device *dev,
 54			      struct rtnl_link_stats64 *stats)
 55{
 56	dev_lstats_read(dev, &stats->tx_packets, &stats->tx_bytes);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 57}
 58
 59static netdev_tx_t dummy_xmit(struct sk_buff *skb, struct net_device *dev)
 60{
 61	dev_lstats_add(dev, skb->len);
 
 
 
 
 
 62
 63	skb_tx_timestamp(skb);
 64	dev_kfree_skb(skb);
 65	return NETDEV_TX_OK;
 66}
 67
 68static int dummy_dev_init(struct net_device *dev)
 69{
 70	dev->lstats = netdev_alloc_pcpu_stats(struct pcpu_lstats);
 71	if (!dev->lstats)
 72		return -ENOMEM;
 73
 74	return 0;
 75}
 76
 77static void dummy_dev_uninit(struct net_device *dev)
 78{
 79	free_percpu(dev->lstats);
 80}
 81
 82static int dummy_change_carrier(struct net_device *dev, bool new_carrier)
 83{
 84	if (new_carrier)
 85		netif_carrier_on(dev);
 86	else
 87		netif_carrier_off(dev);
 88	return 0;
 89}
 90
 91static const struct net_device_ops dummy_netdev_ops = {
 92	.ndo_init		= dummy_dev_init,
 93	.ndo_uninit		= dummy_dev_uninit,
 94	.ndo_start_xmit		= dummy_xmit,
 95	.ndo_validate_addr	= eth_validate_addr,
 96	.ndo_set_rx_mode	= set_multicast_list,
 97	.ndo_set_mac_address	= eth_mac_addr,
 98	.ndo_get_stats64	= dummy_get_stats64,
 99	.ndo_change_carrier	= dummy_change_carrier,
100};
101
102static void dummy_get_drvinfo(struct net_device *dev,
103			      struct ethtool_drvinfo *info)
104{
105	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
 
106}
107
108static const struct ethtool_ops dummy_ethtool_ops = {
109	.get_drvinfo            = dummy_get_drvinfo,
110	.get_ts_info		= ethtool_op_get_ts_info,
111};
112
113static void dummy_setup(struct net_device *dev)
114{
115	ether_setup(dev);
116
117	/* Initialize the device structure. */
118	dev->netdev_ops = &dummy_netdev_ops;
119	dev->ethtool_ops = &dummy_ethtool_ops;
120	dev->needs_free_netdev = true;
121
122	/* Fill in device structure with ethernet-generic values. */
123	dev->flags |= IFF_NOARP;
124	dev->flags &= ~IFF_MULTICAST;
125	dev->priv_flags |= IFF_LIVE_ADDR_CHANGE | IFF_NO_QUEUE;
126	dev->features	|= NETIF_F_SG | NETIF_F_FRAGLIST;
127	dev->features	|= NETIF_F_ALL_TSO;
128	dev->features	|= NETIF_F_HW_CSUM | NETIF_F_HIGHDMA | NETIF_F_LLTX;
129	dev->features	|= NETIF_F_GSO_ENCAP_ALL;
130	dev->hw_features |= dev->features;
131	dev->hw_enc_features |= dev->features;
132	eth_hw_addr_random(dev);
133
134	dev->min_mtu = 0;
135	dev->max_mtu = 0;
136}
137
138static int dummy_validate(struct nlattr *tb[], struct nlattr *data[],
139			  struct netlink_ext_ack *extack)
140{
141	if (tb[IFLA_ADDRESS]) {
142		if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
143			return -EINVAL;
144		if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
145			return -EADDRNOTAVAIL;
146	}
147	return 0;
148}
149
150static struct rtnl_link_ops dummy_link_ops __read_mostly = {
151	.kind		= DRV_NAME,
152	.setup		= dummy_setup,
153	.validate	= dummy_validate,
154};
155
156/* Number of dummy devices to be set up by this module. */
157module_param(numdummies, int, 0);
158MODULE_PARM_DESC(numdummies, "Number of dummy pseudo devices");
159
160static int __init dummy_init_one(void)
161{
162	struct net_device *dev_dummy;
163	int err;
164
165	dev_dummy = alloc_netdev(0, "dummy%d", NET_NAME_ENUM, dummy_setup);
166	if (!dev_dummy)
167		return -ENOMEM;
168
169	dev_dummy->rtnl_link_ops = &dummy_link_ops;
170	err = register_netdevice(dev_dummy);
171	if (err < 0)
172		goto err;
173	return 0;
174
175err:
176	free_netdev(dev_dummy);
177	return err;
178}
179
180static int __init dummy_init_module(void)
181{
182	int i, err = 0;
183
184	down_write(&pernet_ops_rwsem);
185	rtnl_lock();
186	err = __rtnl_link_register(&dummy_link_ops);
187	if (err < 0)
188		goto out;
189
190	for (i = 0; i < numdummies && !err; i++) {
191		err = dummy_init_one();
192		cond_resched();
193	}
194	if (err < 0)
195		__rtnl_link_unregister(&dummy_link_ops);
196
197out:
198	rtnl_unlock();
199	up_write(&pernet_ops_rwsem);
200
201	return err;
202}
203
204static void __exit dummy_cleanup_module(void)
205{
206	rtnl_link_unregister(&dummy_link_ops);
207}
208
209module_init(dummy_init_module);
210module_exit(dummy_cleanup_module);
211MODULE_LICENSE("GPL");
212MODULE_ALIAS_RTNL_LINK(DRV_NAME);