Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Windfarm PowerMac thermal control. LM75 sensor
4 *
5 * (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
6 * <benh@kernel.crashing.org>
7 */
8
9#include <linux/types.h>
10#include <linux/errno.h>
11#include <linux/kernel.h>
12#include <linux/delay.h>
13#include <linux/slab.h>
14#include <linux/init.h>
15#include <linux/wait.h>
16#include <linux/i2c.h>
17#include <asm/prom.h>
18#include <asm/machdep.h>
19#include <asm/io.h>
20#include <asm/sections.h>
21#include <asm/pmac_low_i2c.h>
22
23#include "windfarm.h"
24
25#define VERSION "1.0"
26
27#undef DEBUG
28
29#ifdef DEBUG
30#define DBG(args...) printk(args)
31#else
32#define DBG(args...) do { } while(0)
33#endif
34
35struct wf_lm75_sensor {
36 int ds1775 : 1;
37 int inited : 1;
38 struct i2c_client *i2c;
39 struct wf_sensor sens;
40};
41#define wf_to_lm75(c) container_of(c, struct wf_lm75_sensor, sens)
42
43static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
44{
45 struct wf_lm75_sensor *lm = wf_to_lm75(sr);
46 s32 data;
47
48 if (lm->i2c == NULL)
49 return -ENODEV;
50
51 /* Init chip if necessary */
52 if (!lm->inited) {
53 u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(lm->i2c, 1);
54
55 DBG("wf_lm75: Initializing %s, cfg was: %02x\n",
56 sr->name, cfg);
57
58 /* clear shutdown bit, keep other settings as left by
59 * the firmware for now
60 */
61 cfg_new = cfg & ~0x01;
62 i2c_smbus_write_byte_data(lm->i2c, 1, cfg_new);
63 lm->inited = 1;
64
65 /* If we just powered it up, let's wait 200 ms */
66 msleep(200);
67 }
68
69 /* Read temperature register */
70 data = (s32)le16_to_cpu(i2c_smbus_read_word_data(lm->i2c, 0));
71 data <<= 8;
72 *value = data;
73
74 return 0;
75}
76
77static void wf_lm75_release(struct wf_sensor *sr)
78{
79 struct wf_lm75_sensor *lm = wf_to_lm75(sr);
80
81 kfree(lm);
82}
83
84static const struct wf_sensor_ops wf_lm75_ops = {
85 .get_value = wf_lm75_get,
86 .release = wf_lm75_release,
87 .owner = THIS_MODULE,
88};
89
90static int wf_lm75_probe(struct i2c_client *client,
91 const struct i2c_device_id *id)
92{
93 struct wf_lm75_sensor *lm;
94 int rc, ds1775 = id->driver_data;
95 const char *name, *loc;
96
97 DBG("wf_lm75: creating %s device at address 0x%02x\n",
98 ds1775 ? "ds1775" : "lm75", client->addr);
99
100 loc = of_get_property(client->dev.of_node, "hwsensor-location", NULL);
101 if (!loc) {
102 dev_warn(&client->dev, "Missing hwsensor-location property!\n");
103 return -ENXIO;
104 }
105
106 /* Usual rant about sensor names not beeing very consistent in
107 * the device-tree, oh well ...
108 * Add more entries below as you deal with more setups
109 */
110 if (!strcmp(loc, "Hard drive") || !strcmp(loc, "DRIVE BAY"))
111 name = "hd-temp";
112 else if (!strcmp(loc, "Incoming Air Temp"))
113 name = "incoming-air-temp";
114 else if (!strcmp(loc, "ODD Temp"))
115 name = "optical-drive-temp";
116 else if (!strcmp(loc, "HD Temp"))
117 name = "hard-drive-temp";
118 else if (!strcmp(loc, "PCI SLOTS"))
119 name = "slots-temp";
120 else if (!strcmp(loc, "CPU A INLET"))
121 name = "cpu-inlet-temp-0";
122 else if (!strcmp(loc, "CPU B INLET"))
123 name = "cpu-inlet-temp-1";
124 else
125 return -ENXIO;
126
127
128 lm = kzalloc(sizeof(struct wf_lm75_sensor), GFP_KERNEL);
129 if (lm == NULL)
130 return -ENODEV;
131
132 lm->inited = 0;
133 lm->ds1775 = ds1775;
134 lm->i2c = client;
135 lm->sens.name = name;
136 lm->sens.ops = &wf_lm75_ops;
137 i2c_set_clientdata(client, lm);
138
139 rc = wf_register_sensor(&lm->sens);
140 if (rc)
141 kfree(lm);
142 return rc;
143}
144
145static int wf_lm75_remove(struct i2c_client *client)
146{
147 struct wf_lm75_sensor *lm = i2c_get_clientdata(client);
148
149 DBG("wf_lm75: i2c detatch called for %s\n", lm->sens.name);
150
151 /* Mark client detached */
152 lm->i2c = NULL;
153
154 /* release sensor */
155 wf_unregister_sensor(&lm->sens);
156
157 return 0;
158}
159
160static const struct i2c_device_id wf_lm75_id[] = {
161 { "MAC,lm75", 0 },
162 { "MAC,ds1775", 1 },
163 { }
164};
165MODULE_DEVICE_TABLE(i2c, wf_lm75_id);
166
167static struct i2c_driver wf_lm75_driver = {
168 .driver = {
169 .name = "wf_lm75",
170 },
171 .probe = wf_lm75_probe,
172 .remove = wf_lm75_remove,
173 .id_table = wf_lm75_id,
174};
175
176module_i2c_driver(wf_lm75_driver);
177
178MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
179MODULE_DESCRIPTION("LM75 sensor objects for PowerMacs thermal control");
180MODULE_LICENSE("GPL");
181
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Windfarm PowerMac thermal control. LM75 sensor
4 *
5 * (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
6 * <benh@kernel.crashing.org>
7 */
8
9#include <linux/types.h>
10#include <linux/errno.h>
11#include <linux/kernel.h>
12#include <linux/delay.h>
13#include <linux/slab.h>
14#include <linux/init.h>
15#include <linux/wait.h>
16#include <linux/i2c.h>
17#include <linux/of_device.h>
18#include <asm/prom.h>
19#include <asm/machdep.h>
20#include <asm/io.h>
21#include <asm/sections.h>
22#include <asm/pmac_low_i2c.h>
23
24#include "windfarm.h"
25
26#define VERSION "1.0"
27
28#undef DEBUG
29
30#ifdef DEBUG
31#define DBG(args...) printk(args)
32#else
33#define DBG(args...) do { } while(0)
34#endif
35
36struct wf_lm75_sensor {
37 int ds1775 : 1;
38 int inited : 1;
39 struct i2c_client *i2c;
40 struct wf_sensor sens;
41};
42#define wf_to_lm75(c) container_of(c, struct wf_lm75_sensor, sens)
43
44static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
45{
46 struct wf_lm75_sensor *lm = wf_to_lm75(sr);
47 s32 data;
48
49 if (lm->i2c == NULL)
50 return -ENODEV;
51
52 /* Init chip if necessary */
53 if (!lm->inited) {
54 u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(lm->i2c, 1);
55
56 DBG("wf_lm75: Initializing %s, cfg was: %02x\n",
57 sr->name, cfg);
58
59 /* clear shutdown bit, keep other settings as left by
60 * the firmware for now
61 */
62 cfg_new = cfg & ~0x01;
63 i2c_smbus_write_byte_data(lm->i2c, 1, cfg_new);
64 lm->inited = 1;
65
66 /* If we just powered it up, let's wait 200 ms */
67 msleep(200);
68 }
69
70 /* Read temperature register */
71 data = (s32)le16_to_cpu(i2c_smbus_read_word_data(lm->i2c, 0));
72 data <<= 8;
73 *value = data;
74
75 return 0;
76}
77
78static void wf_lm75_release(struct wf_sensor *sr)
79{
80 struct wf_lm75_sensor *lm = wf_to_lm75(sr);
81
82 kfree(lm);
83}
84
85static const struct wf_sensor_ops wf_lm75_ops = {
86 .get_value = wf_lm75_get,
87 .release = wf_lm75_release,
88 .owner = THIS_MODULE,
89};
90
91static int wf_lm75_probe(struct i2c_client *client,
92 const struct i2c_device_id *id)
93{
94 struct wf_lm75_sensor *lm;
95 int rc, ds1775;
96 const char *name, *loc;
97
98 if (id)
99 ds1775 = id->driver_data;
100 else
101 ds1775 = !!of_device_get_match_data(&client->dev);
102
103 DBG("wf_lm75: creating %s device at address 0x%02x\n",
104 ds1775 ? "ds1775" : "lm75", client->addr);
105
106 loc = of_get_property(client->dev.of_node, "hwsensor-location", NULL);
107 if (!loc) {
108 dev_warn(&client->dev, "Missing hwsensor-location property!\n");
109 return -ENXIO;
110 }
111
112 /* Usual rant about sensor names not beeing very consistent in
113 * the device-tree, oh well ...
114 * Add more entries below as you deal with more setups
115 */
116 if (!strcmp(loc, "Hard drive") || !strcmp(loc, "DRIVE BAY"))
117 name = "hd-temp";
118 else if (!strcmp(loc, "Incoming Air Temp"))
119 name = "incoming-air-temp";
120 else if (!strcmp(loc, "ODD Temp"))
121 name = "optical-drive-temp";
122 else if (!strcmp(loc, "HD Temp"))
123 name = "hard-drive-temp";
124 else if (!strcmp(loc, "PCI SLOTS"))
125 name = "slots-temp";
126 else if (!strcmp(loc, "CPU A INLET"))
127 name = "cpu-inlet-temp-0";
128 else if (!strcmp(loc, "CPU B INLET"))
129 name = "cpu-inlet-temp-1";
130 else
131 return -ENXIO;
132
133
134 lm = kzalloc(sizeof(struct wf_lm75_sensor), GFP_KERNEL);
135 if (lm == NULL)
136 return -ENODEV;
137
138 lm->inited = 0;
139 lm->ds1775 = ds1775;
140 lm->i2c = client;
141 lm->sens.name = name;
142 lm->sens.ops = &wf_lm75_ops;
143 i2c_set_clientdata(client, lm);
144
145 rc = wf_register_sensor(&lm->sens);
146 if (rc)
147 kfree(lm);
148 return rc;
149}
150
151static int wf_lm75_remove(struct i2c_client *client)
152{
153 struct wf_lm75_sensor *lm = i2c_get_clientdata(client);
154
155 DBG("wf_lm75: i2c detatch called for %s\n", lm->sens.name);
156
157 /* Mark client detached */
158 lm->i2c = NULL;
159
160 /* release sensor */
161 wf_unregister_sensor(&lm->sens);
162
163 return 0;
164}
165
166static const struct i2c_device_id wf_lm75_id[] = {
167 { "MAC,lm75", 0 },
168 { "MAC,ds1775", 1 },
169 { }
170};
171MODULE_DEVICE_TABLE(i2c, wf_lm75_id);
172
173static const struct of_device_id wf_lm75_of_id[] = {
174 { .compatible = "lm75", .data = (void *)0},
175 { .compatible = "ds1775", .data = (void *)1 },
176 { }
177};
178MODULE_DEVICE_TABLE(of, wf_lm75_of_id);
179
180static struct i2c_driver wf_lm75_driver = {
181 .driver = {
182 .name = "wf_lm75",
183 .of_match_table = wf_lm75_of_id,
184 },
185 .probe = wf_lm75_probe,
186 .remove = wf_lm75_remove,
187 .id_table = wf_lm75_id,
188};
189
190module_i2c_driver(wf_lm75_driver);
191
192MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
193MODULE_DESCRIPTION("LM75 sensor objects for PowerMacs thermal control");
194MODULE_LICENSE("GPL");
195