Loading...
1/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */
2/******************************************************************************
3 *
4 * Name: actypes.h - Common data types for the entire ACPI subsystem
5 *
6 * Copyright (C) 2000 - 2019, Intel Corp.
7 *
8 *****************************************************************************/
9
10#ifndef __ACTYPES_H__
11#define __ACTYPES_H__
12
13/* acpisrc:struct_defs -- for acpisrc conversion */
14
15/*
16 * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent
17 * header and must be either 32 or 64. 16-bit ACPICA is no longer
18 * supported, as of 12/2006.
19 */
20#ifndef ACPI_MACHINE_WIDTH
21#error ACPI_MACHINE_WIDTH not defined
22#endif
23
24/*
25 * Data type ranges
26 * Note: These macros are designed to be compiler independent as well as
27 * working around problems that some 32-bit compilers have with 64-bit
28 * constants.
29 */
30#define ACPI_UINT8_MAX (u8) (~((u8) 0)) /* 0xFF */
31#define ACPI_UINT16_MAX (u16)(~((u16) 0)) /* 0xFFFF */
32#define ACPI_UINT32_MAX (u32)(~((u32) 0)) /* 0xFFFFFFFF */
33#define ACPI_UINT64_MAX (u64)(~((u64) 0)) /* 0xFFFFFFFFFFFFFFFF */
34#define ACPI_ASCII_MAX 0x7F
35
36/*
37 * Architecture-specific ACPICA Subsystem Data Types
38 *
39 * The goal of these types is to provide source code portability across
40 * 16-bit, 32-bit, and 64-bit targets.
41 *
42 * 1) The following types are of fixed size for all targets (16/32/64):
43 *
44 * u8 Logical boolean
45 *
46 * u8 8-bit (1 byte) unsigned value
47 * u16 16-bit (2 byte) unsigned value
48 * u32 32-bit (4 byte) unsigned value
49 * u64 64-bit (8 byte) unsigned value
50 *
51 * s16 16-bit (2 byte) signed value
52 * s32 32-bit (4 byte) signed value
53 * s64 64-bit (8 byte) signed value
54 *
55 * COMPILER_DEPENDENT_UINT64/s64 - These types are defined in the
56 * compiler-dependent header(s) and were introduced because there is no
57 * common 64-bit integer type across the various compilation models, as
58 * shown in the table below.
59 *
60 * Datatype LP64 ILP64 LLP64 ILP32 LP32 16bit
61 * char 8 8 8 8 8 8
62 * short 16 16 16 16 16 16
63 * _int32 32
64 * int 32 64 32 32 16 16
65 * long 64 64 32 32 32 32
66 * long long 64 64
67 * pointer 64 64 64 32 32 32
68 *
69 * Note: ILP64 and LP32 are currently not supported.
70 *
71 *
72 * 2) These types represent the native word size of the target mode of the
73 * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are
74 * usually used for memory allocation, efficient loop counters, and array
75 * indexes. The types are similar to the size_t type in the C library and
76 * are required because there is no C type that consistently represents the
77 * native data width. acpi_size is needed because there is no guarantee
78 * that a kernel-level C library is present.
79 *
80 * acpi_size 16/32/64-bit unsigned value
81 * acpi_native_int 16/32/64-bit signed value
82 */
83
84/*******************************************************************************
85 *
86 * Common types for all compilers, all targets
87 *
88 ******************************************************************************/
89
90#ifndef ACPI_USE_SYSTEM_INTTYPES
91
92typedef unsigned char u8;
93typedef unsigned short u16;
94typedef short s16;
95typedef COMPILER_DEPENDENT_UINT64 u64;
96typedef COMPILER_DEPENDENT_INT64 s64;
97
98#endif /* ACPI_USE_SYSTEM_INTTYPES */
99
100/*
101 * Value returned by acpi_os_get_thread_id. There is no standard "thread_id"
102 * across operating systems or even the various UNIX systems. Since ACPICA
103 * only needs the thread ID as a unique thread identifier, we use a u64
104 * as the only common data type - it will accommodate any type of pointer or
105 * any type of integer. It is up to the host-dependent OSL to cast the
106 * native thread ID type to a u64 (in acpi_os_get_thread_id).
107 */
108#define acpi_thread_id u64
109
110/*******************************************************************************
111 *
112 * Types specific to 64-bit targets
113 *
114 ******************************************************************************/
115
116#if ACPI_MACHINE_WIDTH == 64
117
118#ifndef ACPI_USE_SYSTEM_INTTYPES
119
120typedef unsigned int u32;
121typedef int s32;
122
123#endif /* ACPI_USE_SYSTEM_INTTYPES */
124
125typedef s64 acpi_native_int;
126
127typedef u64 acpi_size;
128typedef u64 acpi_io_address;
129typedef u64 acpi_physical_address;
130
131#define ACPI_MAX_PTR ACPI_UINT64_MAX
132#define ACPI_SIZE_MAX ACPI_UINT64_MAX
133
134#define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */
135#define ACPI_USE_NATIVE_MATH64 /* Has native 64-bit integer support */
136
137/*
138 * In the case of the Itanium Processor Family (IPF), the hardware does not
139 * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED
140 * flag to indicate that special precautions must be taken to avoid alignment
141 * faults. (IA64 or ia64 is currently used by existing compilers to indicate
142 * IPF.)
143 *
144 * Note: EM64T and other X86-64 processors support misaligned transfers,
145 * so there is no need to define this flag.
146 */
147#if defined (__IA64__) || defined (__ia64__)
148#define ACPI_MISALIGNMENT_NOT_SUPPORTED
149#endif
150
151/*******************************************************************************
152 *
153 * Types specific to 32-bit targets
154 *
155 ******************************************************************************/
156
157#elif ACPI_MACHINE_WIDTH == 32
158
159#ifndef ACPI_USE_SYSTEM_INTTYPES
160
161typedef unsigned int u32;
162typedef int s32;
163
164#endif /* ACPI_USE_SYSTEM_INTTYPES */
165
166typedef s32 acpi_native_int;
167
168typedef u32 acpi_size;
169
170#ifdef ACPI_32BIT_PHYSICAL_ADDRESS
171
172/*
173 * OSPMs can define this to shrink the size of the structures for 32-bit
174 * none PAE environment. ASL compiler may always define this to generate
175 * 32-bit OSPM compliant tables.
176 */
177typedef u32 acpi_io_address;
178typedef u32 acpi_physical_address;
179
180#else /* ACPI_32BIT_PHYSICAL_ADDRESS */
181
182/*
183 * It is reported that, after some calculations, the physical addresses can
184 * wrap over the 32-bit boundary on 32-bit PAE environment.
185 * https://bugzilla.kernel.org/show_bug.cgi?id=87971
186 */
187typedef u64 acpi_io_address;
188typedef u64 acpi_physical_address;
189
190#endif /* ACPI_32BIT_PHYSICAL_ADDRESS */
191
192#define ACPI_MAX_PTR ACPI_UINT32_MAX
193#define ACPI_SIZE_MAX ACPI_UINT32_MAX
194
195#else
196
197/* ACPI_MACHINE_WIDTH must be either 64 or 32 */
198
199#error unknown ACPI_MACHINE_WIDTH
200#endif
201
202/*******************************************************************************
203 *
204 * OS-dependent types
205 *
206 * If the defaults below are not appropriate for the host system, they can
207 * be defined in the OS-specific header, and this will take precedence.
208 *
209 ******************************************************************************/
210
211/* Flags for acpi_os_acquire_lock/acpi_os_release_lock */
212
213#ifndef acpi_cpu_flags
214#define acpi_cpu_flags acpi_size
215#endif
216
217/* Object returned from acpi_os_create_cache */
218
219#ifndef acpi_cache_t
220#ifdef ACPI_USE_LOCAL_CACHE
221#define acpi_cache_t struct acpi_memory_list
222#else
223#define acpi_cache_t void *
224#endif
225#endif
226
227/*
228 * Synchronization objects - Mutexes, Semaphores, and spin_locks
229 */
230#if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE)
231/*
232 * These macros are used if the host OS does not support a mutex object.
233 * Map the OSL Mutex interfaces to binary semaphores.
234 */
235#define acpi_mutex acpi_semaphore
236#define acpi_os_create_mutex(out_handle) acpi_os_create_semaphore (1, 1, out_handle)
237#define acpi_os_delete_mutex(handle) (void) acpi_os_delete_semaphore (handle)
238#define acpi_os_acquire_mutex(handle,time) acpi_os_wait_semaphore (handle, 1, time)
239#define acpi_os_release_mutex(handle) (void) acpi_os_signal_semaphore (handle, 1)
240#endif
241
242/* Configurable types for synchronization objects */
243
244#ifndef acpi_spinlock
245#define acpi_spinlock void *
246#endif
247
248#ifndef acpi_raw_spinlock
249#define acpi_raw_spinlock acpi_spinlock
250#endif
251
252#ifndef acpi_semaphore
253#define acpi_semaphore void *
254#endif
255
256#ifndef acpi_mutex
257#define acpi_mutex void *
258#endif
259
260/*******************************************************************************
261 *
262 * Compiler-dependent types
263 *
264 * If the defaults below are not appropriate for the host compiler, they can
265 * be defined in the compiler-specific header, and this will take precedence.
266 *
267 ******************************************************************************/
268
269/* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */
270
271#ifndef acpi_uintptr_t
272#define acpi_uintptr_t void *
273#endif
274
275/*
276 * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because
277 * some compilers can catch printf format string problems
278 */
279#ifndef ACPI_PRINTF_LIKE
280#define ACPI_PRINTF_LIKE(c)
281#endif
282
283/*
284 * Some compilers complain about unused variables. Sometimes we don't want
285 * to use all the variables (for example, _acpi_module_name). This allows us
286 * to tell the compiler in a per-variable manner that a variable
287 * is unused
288 */
289#ifndef ACPI_UNUSED_VAR
290#define ACPI_UNUSED_VAR
291#endif
292
293/*
294 * All ACPICA external functions that are available to the rest of the
295 * kernel are tagged with these macros which can be defined as appropriate
296 * for the host.
297 *
298 * Notes:
299 * ACPI_EXPORT_SYMBOL_INIT is used for initialization and termination
300 * interfaces that may need special processing.
301 * ACPI_EXPORT_SYMBOL is used for all other public external functions.
302 */
303#ifndef ACPI_EXPORT_SYMBOL_INIT
304#define ACPI_EXPORT_SYMBOL_INIT(symbol)
305#endif
306
307#ifndef ACPI_EXPORT_SYMBOL
308#define ACPI_EXPORT_SYMBOL(symbol)
309#endif
310
311/*
312 * Compiler/Clibrary-dependent debug initialization. Used for ACPICA
313 * utilities only.
314 */
315#ifndef ACPI_DEBUG_INITIALIZE
316#define ACPI_DEBUG_INITIALIZE()
317#endif
318
319/*******************************************************************************
320 *
321 * Configuration
322 *
323 ******************************************************************************/
324
325#ifdef ACPI_NO_MEM_ALLOCATIONS
326
327#define ACPI_ALLOCATE(a) NULL
328#define ACPI_ALLOCATE_ZEROED(a) NULL
329#define ACPI_FREE(a)
330#define ACPI_MEM_TRACKING(a)
331
332#else /* ACPI_NO_MEM_ALLOCATIONS */
333
334#ifdef ACPI_DBG_TRACK_ALLOCATIONS
335/*
336 * Memory allocation tracking (used by acpi_exec to detect memory leaks)
337 */
338#define ACPI_MEM_PARAMETERS _COMPONENT, _acpi_module_name, __LINE__
339#define ACPI_ALLOCATE(a) acpi_ut_allocate_and_track ((acpi_size) (a), ACPI_MEM_PARAMETERS)
340#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed_and_track ((acpi_size) (a), ACPI_MEM_PARAMETERS)
341#define ACPI_FREE(a) acpi_ut_free_and_track (a, ACPI_MEM_PARAMETERS)
342#define ACPI_MEM_TRACKING(a) a
343
344#else
345/*
346 * Normal memory allocation directly via the OS services layer
347 */
348#define ACPI_ALLOCATE(a) acpi_os_allocate ((acpi_size) (a))
349#define ACPI_ALLOCATE_ZEROED(a) acpi_os_allocate_zeroed ((acpi_size) (a))
350#define ACPI_FREE(a) acpi_os_free (a)
351#define ACPI_MEM_TRACKING(a)
352
353#endif /* ACPI_DBG_TRACK_ALLOCATIONS */
354
355#endif /* ACPI_NO_MEM_ALLOCATIONS */
356
357/******************************************************************************
358 *
359 * ACPI Specification constants (Do not change unless the specification
360 * changes)
361 *
362 *****************************************************************************/
363
364/* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */
365
366#define ACPI_MAX_GPE_BLOCKS 2
367
368/* Default ACPI register widths */
369
370#define ACPI_GPE_REGISTER_WIDTH 8
371#define ACPI_PM1_REGISTER_WIDTH 16
372#define ACPI_PM2_REGISTER_WIDTH 8
373#define ACPI_PM_TIMER_WIDTH 32
374#define ACPI_RESET_REGISTER_WIDTH 8
375
376/* Names within the namespace are 4 bytes long */
377
378#define ACPI_NAMESEG_SIZE 4 /* Fixed by ACPI spec */
379#define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */
380#define ACPI_PATH_SEPARATOR '.'
381
382/* Sizes for ACPI table headers */
383
384#define ACPI_OEM_ID_SIZE 6
385#define ACPI_OEM_TABLE_ID_SIZE 8
386
387/* ACPI/PNP hardware IDs */
388
389#define PCI_ROOT_HID_STRING "PNP0A03"
390#define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08"
391
392/* PM Timer ticks per second (HZ) */
393
394#define ACPI_PM_TIMER_FREQUENCY 3579545
395
396/*******************************************************************************
397 *
398 * Independent types
399 *
400 ******************************************************************************/
401
402/* Logical defines and NULL */
403
404#ifdef FALSE
405#undef FALSE
406#endif
407#define FALSE (1 == 0)
408
409#ifdef TRUE
410#undef TRUE
411#endif
412#define TRUE (1 == 1)
413
414#ifndef NULL
415#define NULL (void *) 0
416#endif
417
418/*
419 * Miscellaneous types
420 */
421typedef u32 acpi_status; /* All ACPI Exceptions */
422typedef u32 acpi_name; /* 4-byte ACPI name */
423typedef char *acpi_string; /* Null terminated ASCII string */
424typedef void *acpi_handle; /* Actually a ptr to a NS Node */
425
426/* Time constants for timer calculations */
427
428#define ACPI_MSEC_PER_SEC 1000L
429
430#define ACPI_USEC_PER_MSEC 1000L
431#define ACPI_USEC_PER_SEC 1000000L
432
433#define ACPI_100NSEC_PER_USEC 10L
434#define ACPI_100NSEC_PER_MSEC 10000L
435#define ACPI_100NSEC_PER_SEC 10000000L
436
437#define ACPI_NSEC_PER_USEC 1000L
438#define ACPI_NSEC_PER_MSEC 1000000L
439#define ACPI_NSEC_PER_SEC 1000000000L
440
441#define ACPI_TIME_AFTER(a, b) ((s64)((b) - (a)) < 0)
442
443/* Owner IDs are used to track namespace nodes for selective deletion */
444
445typedef u16 acpi_owner_id;
446#define ACPI_OWNER_ID_MAX 0xFFF /* 4095 possible owner IDs */
447
448#define ACPI_INTEGER_BIT_SIZE 64
449#define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */
450#define ACPI_MAX64_DECIMAL_DIGITS 20
451#define ACPI_MAX32_DECIMAL_DIGITS 10
452#define ACPI_MAX16_DECIMAL_DIGITS 5
453#define ACPI_MAX8_DECIMAL_DIGITS 3
454
455/*
456 * Constants with special meanings
457 */
458#define ACPI_ROOT_OBJECT ((acpi_handle) ACPI_TO_POINTER (ACPI_MAX_PTR))
459#define ACPI_WAIT_FOREVER 0xFFFF /* u16, as per ACPI spec */
460#define ACPI_DO_NOT_WAIT 0
461
462/*
463 * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are
464 * 32 bits. In ACPI version 2 (2000) and later, integers are max 64 bits.
465 * Note that this pertains to the ACPI integer type only, not to other
466 * integers used in the implementation of the ACPICA subsystem.
467 *
468 * 01/2010: This type is obsolete and has been removed from the entire ACPICA
469 * code base. It remains here for compatibility with device drivers that use
470 * the type. However, it will be removed in the future.
471 */
472typedef u64 acpi_integer;
473#define ACPI_INTEGER_MAX ACPI_UINT64_MAX
474
475/*******************************************************************************
476 *
477 * Commonly used macros
478 *
479 ******************************************************************************/
480
481/* Data manipulation */
482
483#define ACPI_LOBYTE(integer) ((u8) (u16)(integer))
484#define ACPI_HIBYTE(integer) ((u8) (((u16)(integer)) >> 8))
485#define ACPI_LOWORD(integer) ((u16) (u32)(integer))
486#define ACPI_HIWORD(integer) ((u16)(((u32)(integer)) >> 16))
487#define ACPI_LODWORD(integer64) ((u32) (u64)(integer64))
488#define ACPI_HIDWORD(integer64) ((u32)(((u64)(integer64)) >> 32))
489
490#define ACPI_SET_BIT(target,bit) ((target) |= (bit))
491#define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit))
492#define ACPI_MIN(a,b) (((a)<(b))?(a):(b))
493#define ACPI_MAX(a,b) (((a)>(b))?(a):(b))
494
495/* Size calculation */
496
497#define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0]))
498
499/* Pointer manipulation */
500
501#define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p))
502#define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p))
503#define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b)))
504#define ACPI_SUB_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) - (acpi_size)(b)))
505#define ACPI_PTR_DIFF(a, b) ((acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b))))
506
507/* Pointer/Integer type conversions */
508
509#define ACPI_TO_POINTER(i) ACPI_CAST_PTR (void, (acpi_size) (i))
510#define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) 0)
511#define ACPI_OFFSET(d, f) ACPI_PTR_DIFF (&(((d *) 0)->f), (void *) 0)
512#define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i)
513#define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i)
514
515/* Optimizations for 4-character (32-bit) acpi_name manipulation */
516
517#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
518#define ACPI_COMPARE_NAMESEG(a,b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b)))
519#define ACPI_COPY_NAMESEG(dest,src) (*ACPI_CAST_PTR (u32, (dest)) = *ACPI_CAST_PTR (u32, (src)))
520#else
521#define ACPI_COMPARE_NAMESEG(a,b) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAMESEG_SIZE))
522#define ACPI_COPY_NAMESEG(dest,src) (strncpy (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAMESEG_SIZE))
523#endif
524
525/* Support for the special RSDP signature (8 characters) */
526
527#define ACPI_VALIDATE_RSDP_SIG(a) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_SIG_RSDP, 8))
528#define ACPI_MAKE_RSDP_SIG(dest) (memcpy (ACPI_CAST_PTR (char, (dest)), ACPI_SIG_RSDP, 8))
529
530/* Support for OEMx signature (x can be any character) */
531#define ACPI_IS_OEM_SIG(a) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_OEM_NAME, 3) &&\
532 strnlen (a, ACPI_NAMESEG_SIZE) == ACPI_NAMESEG_SIZE)
533
534/*
535 * Algorithm to obtain access bit width.
536 * Can be used with access_width of struct acpi_generic_address and access_size of
537 * struct acpi_resource_generic_register.
538 */
539#define ACPI_ACCESS_BIT_WIDTH(size) (1 << ((size) + 2))
540
541/*******************************************************************************
542 *
543 * Miscellaneous constants
544 *
545 ******************************************************************************/
546
547/*
548 * Initialization sequence options
549 */
550#define ACPI_FULL_INITIALIZATION 0x0000
551#define ACPI_NO_FACS_INIT 0x0001
552#define ACPI_NO_ACPI_ENABLE 0x0002
553#define ACPI_NO_HARDWARE_INIT 0x0004
554#define ACPI_NO_EVENT_INIT 0x0008
555#define ACPI_NO_HANDLER_INIT 0x0010
556#define ACPI_NO_OBJECT_INIT 0x0020
557#define ACPI_NO_DEVICE_INIT 0x0040
558#define ACPI_NO_ADDRESS_SPACE_INIT 0x0080
559
560/*
561 * Initialization state
562 */
563#define ACPI_SUBSYSTEM_INITIALIZE 0x01
564#define ACPI_INITIALIZED_OK 0x02
565
566/*
567 * Power state values
568 */
569#define ACPI_STATE_UNKNOWN (u8) 0xFF
570
571#define ACPI_STATE_S0 (u8) 0
572#define ACPI_STATE_S1 (u8) 1
573#define ACPI_STATE_S2 (u8) 2
574#define ACPI_STATE_S3 (u8) 3
575#define ACPI_STATE_S4 (u8) 4
576#define ACPI_STATE_S5 (u8) 5
577#define ACPI_S_STATES_MAX ACPI_STATE_S5
578#define ACPI_S_STATE_COUNT 6
579
580#define ACPI_STATE_D0 (u8) 0
581#define ACPI_STATE_D1 (u8) 1
582#define ACPI_STATE_D2 (u8) 2
583#define ACPI_STATE_D3_HOT (u8) 3
584#define ACPI_STATE_D3 (u8) 4
585#define ACPI_STATE_D3_COLD ACPI_STATE_D3
586#define ACPI_D_STATES_MAX ACPI_STATE_D3
587#define ACPI_D_STATE_COUNT 5
588
589#define ACPI_STATE_C0 (u8) 0
590#define ACPI_STATE_C1 (u8) 1
591#define ACPI_STATE_C2 (u8) 2
592#define ACPI_STATE_C3 (u8) 3
593#define ACPI_C_STATES_MAX ACPI_STATE_C3
594#define ACPI_C_STATE_COUNT 4
595
596/*
597 * Sleep type invalid value
598 */
599#define ACPI_SLEEP_TYPE_MAX 0x7
600#define ACPI_SLEEP_TYPE_INVALID 0xFF
601
602/*
603 * Standard notify values
604 */
605#define ACPI_NOTIFY_BUS_CHECK (u8) 0x00
606#define ACPI_NOTIFY_DEVICE_CHECK (u8) 0x01
607#define ACPI_NOTIFY_DEVICE_WAKE (u8) 0x02
608#define ACPI_NOTIFY_EJECT_REQUEST (u8) 0x03
609#define ACPI_NOTIFY_DEVICE_CHECK_LIGHT (u8) 0x04
610#define ACPI_NOTIFY_FREQUENCY_MISMATCH (u8) 0x05
611#define ACPI_NOTIFY_BUS_MODE_MISMATCH (u8) 0x06
612#define ACPI_NOTIFY_POWER_FAULT (u8) 0x07
613#define ACPI_NOTIFY_CAPABILITIES_CHECK (u8) 0x08
614#define ACPI_NOTIFY_DEVICE_PLD_CHECK (u8) 0x09
615#define ACPI_NOTIFY_RESERVED (u8) 0x0A
616#define ACPI_NOTIFY_LOCALITY_UPDATE (u8) 0x0B
617#define ACPI_NOTIFY_SHUTDOWN_REQUEST (u8) 0x0C
618#define ACPI_NOTIFY_AFFINITY_UPDATE (u8) 0x0D
619#define ACPI_NOTIFY_MEMORY_UPDATE (u8) 0x0E
620#define ACPI_NOTIFY_DISCONNECT_RECOVER (u8) 0x0F
621
622#define ACPI_GENERIC_NOTIFY_MAX 0x0F
623#define ACPI_SPECIFIC_NOTIFY_MAX 0x84
624
625/*
626 * Types associated with ACPI names and objects. The first group of
627 * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition
628 * of the ACPI object_type() operator (See the ACPI Spec). Therefore,
629 * only add to the first group if the spec changes.
630 *
631 * NOTE: Types must be kept in sync with the global acpi_ns_properties
632 * and acpi_ns_type_names arrays.
633 */
634typedef u32 acpi_object_type;
635
636#define ACPI_TYPE_ANY 0x00
637#define ACPI_TYPE_INTEGER 0x01 /* Byte/Word/Dword/Zero/One/Ones */
638#define ACPI_TYPE_STRING 0x02
639#define ACPI_TYPE_BUFFER 0x03
640#define ACPI_TYPE_PACKAGE 0x04 /* byte_const, multiple data_term/Constant/super_name */
641#define ACPI_TYPE_FIELD_UNIT 0x05
642#define ACPI_TYPE_DEVICE 0x06 /* Name, multiple Node */
643#define ACPI_TYPE_EVENT 0x07
644#define ACPI_TYPE_METHOD 0x08 /* Name, byte_const, multiple Code */
645#define ACPI_TYPE_MUTEX 0x09
646#define ACPI_TYPE_REGION 0x0A
647#define ACPI_TYPE_POWER 0x0B /* Name,byte_const,word_const,multi Node */
648#define ACPI_TYPE_PROCESSOR 0x0C /* Name,byte_const,Dword_const,byte_const,multi nm_o */
649#define ACPI_TYPE_THERMAL 0x0D /* Name, multiple Node */
650#define ACPI_TYPE_BUFFER_FIELD 0x0E
651#define ACPI_TYPE_DDB_HANDLE 0x0F
652#define ACPI_TYPE_DEBUG_OBJECT 0x10
653
654#define ACPI_TYPE_EXTERNAL_MAX 0x10
655#define ACPI_NUM_TYPES (ACPI_TYPE_EXTERNAL_MAX + 1)
656
657/*
658 * These are object types that do not map directly to the ACPI
659 * object_type() operator. They are used for various internal purposes
660 * only. If new predefined ACPI_TYPEs are added (via the ACPI
661 * specification), these internal types must move upwards. (There
662 * is code that depends on these values being contiguous with the
663 * external types above.)
664 */
665#define ACPI_TYPE_LOCAL_REGION_FIELD 0x11
666#define ACPI_TYPE_LOCAL_BANK_FIELD 0x12
667#define ACPI_TYPE_LOCAL_INDEX_FIELD 0x13
668#define ACPI_TYPE_LOCAL_REFERENCE 0x14 /* Arg#, Local#, Name, Debug, ref_of, Index */
669#define ACPI_TYPE_LOCAL_ALIAS 0x15
670#define ACPI_TYPE_LOCAL_METHOD_ALIAS 0x16
671#define ACPI_TYPE_LOCAL_NOTIFY 0x17
672#define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18
673#define ACPI_TYPE_LOCAL_RESOURCE 0x19
674#define ACPI_TYPE_LOCAL_RESOURCE_FIELD 0x1A
675#define ACPI_TYPE_LOCAL_SCOPE 0x1B /* 1 Name, multiple object_list Nodes */
676
677#define ACPI_TYPE_NS_NODE_MAX 0x1B /* Last typecode used within a NS Node */
678#define ACPI_TOTAL_TYPES (ACPI_TYPE_NS_NODE_MAX + 1)
679
680/*
681 * These are special object types that never appear in
682 * a Namespace node, only in an object of union acpi_operand_object
683 */
684#define ACPI_TYPE_LOCAL_EXTRA 0x1C
685#define ACPI_TYPE_LOCAL_DATA 0x1D
686
687#define ACPI_TYPE_LOCAL_MAX 0x1D
688
689/* All types above here are invalid */
690
691#define ACPI_TYPE_INVALID 0x1E
692#define ACPI_TYPE_NOT_FOUND 0xFF
693
694#define ACPI_NUM_NS_TYPES (ACPI_TYPE_INVALID + 1)
695
696/*
697 * All I/O
698 */
699#define ACPI_READ 0
700#define ACPI_WRITE 1
701#define ACPI_IO_MASK 1
702
703/*
704 * Event Types: Fixed & General Purpose
705 */
706typedef u32 acpi_event_type;
707
708/*
709 * Fixed events
710 */
711#define ACPI_EVENT_PMTIMER 0
712#define ACPI_EVENT_GLOBAL 1
713#define ACPI_EVENT_POWER_BUTTON 2
714#define ACPI_EVENT_SLEEP_BUTTON 3
715#define ACPI_EVENT_RTC 4
716#define ACPI_EVENT_MAX 4
717#define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1
718
719/*
720 * Event status - Per event
721 * -------------
722 * The encoding of acpi_event_status is illustrated below.
723 * Note that a set bit (1) indicates the property is TRUE
724 * (e.g. if bit 0 is set then the event is enabled).
725 * +-------------+-+-+-+-+-+-+
726 * | Bits 31:6 |5|4|3|2|1|0|
727 * +-------------+-+-+-+-+-+-+
728 * | | | | | | |
729 * | | | | | | +- Enabled?
730 * | | | | | +--- Enabled for wake?
731 * | | | | +----- Status bit set?
732 * | | | +------- Enable bit set?
733 * | | +--------- Has a handler?
734 * | +----------- Masked?
735 * +----------------- <Reserved>
736 */
737typedef u32 acpi_event_status;
738
739#define ACPI_EVENT_FLAG_DISABLED (acpi_event_status) 0x00
740#define ACPI_EVENT_FLAG_ENABLED (acpi_event_status) 0x01
741#define ACPI_EVENT_FLAG_WAKE_ENABLED (acpi_event_status) 0x02
742#define ACPI_EVENT_FLAG_STATUS_SET (acpi_event_status) 0x04
743#define ACPI_EVENT_FLAG_ENABLE_SET (acpi_event_status) 0x08
744#define ACPI_EVENT_FLAG_HAS_HANDLER (acpi_event_status) 0x10
745#define ACPI_EVENT_FLAG_MASKED (acpi_event_status) 0x20
746#define ACPI_EVENT_FLAG_SET ACPI_EVENT_FLAG_STATUS_SET
747
748/* Actions for acpi_set_gpe, acpi_gpe_wakeup, acpi_hw_low_set_gpe */
749
750#define ACPI_GPE_ENABLE 0
751#define ACPI_GPE_DISABLE 1
752#define ACPI_GPE_CONDITIONAL_ENABLE 2
753
754/*
755 * GPE info flags - Per GPE
756 * +---+-+-+-+---+
757 * |7:6|5|4|3|2:0|
758 * +---+-+-+-+---+
759 * | | | | |
760 * | | | | +-- Type of dispatch:to method, handler, notify, or none
761 * | | | +----- Interrupt type: edge or level triggered
762 * | | +------- Is a Wake GPE
763 * | +--------- Has been enabled automatically at init time
764 * +------------ <Reserved>
765 */
766#define ACPI_GPE_DISPATCH_NONE (u8) 0x00
767#define ACPI_GPE_DISPATCH_METHOD (u8) 0x01
768#define ACPI_GPE_DISPATCH_HANDLER (u8) 0x02
769#define ACPI_GPE_DISPATCH_NOTIFY (u8) 0x03
770#define ACPI_GPE_DISPATCH_RAW_HANDLER (u8) 0x04
771#define ACPI_GPE_DISPATCH_MASK (u8) 0x07
772#define ACPI_GPE_DISPATCH_TYPE(flags) ((u8) ((flags) & ACPI_GPE_DISPATCH_MASK))
773
774#define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x08
775#define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00
776#define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x08
777
778#define ACPI_GPE_CAN_WAKE (u8) 0x10
779#define ACPI_GPE_AUTO_ENABLED (u8) 0x20
780#define ACPI_GPE_INITIALIZED (u8) 0x40
781
782/*
783 * Flags for GPE and Lock interfaces
784 */
785#define ACPI_NOT_ISR 0x1
786#define ACPI_ISR 0x0
787
788/* Notify types */
789
790#define ACPI_SYSTEM_NOTIFY 0x1
791#define ACPI_DEVICE_NOTIFY 0x2
792#define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY)
793#define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3
794#define ACPI_NUM_NOTIFY_TYPES 2
795
796#define ACPI_MAX_SYS_NOTIFY 0x7F
797#define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF
798
799#define ACPI_SYSTEM_HANDLER_LIST 0 /* Used as index, must be SYSTEM_NOTIFY -1 */
800#define ACPI_DEVICE_HANDLER_LIST 1 /* Used as index, must be DEVICE_NOTIFY -1 */
801
802/* Address Space (Operation Region) Types */
803
804typedef u8 acpi_adr_space_type;
805
806#define ACPI_ADR_SPACE_SYSTEM_MEMORY (acpi_adr_space_type) 0
807#define ACPI_ADR_SPACE_SYSTEM_IO (acpi_adr_space_type) 1
808#define ACPI_ADR_SPACE_PCI_CONFIG (acpi_adr_space_type) 2
809#define ACPI_ADR_SPACE_EC (acpi_adr_space_type) 3
810#define ACPI_ADR_SPACE_SMBUS (acpi_adr_space_type) 4
811#define ACPI_ADR_SPACE_CMOS (acpi_adr_space_type) 5
812#define ACPI_ADR_SPACE_PCI_BAR_TARGET (acpi_adr_space_type) 6
813#define ACPI_ADR_SPACE_IPMI (acpi_adr_space_type) 7
814#define ACPI_ADR_SPACE_GPIO (acpi_adr_space_type) 8
815#define ACPI_ADR_SPACE_GSBUS (acpi_adr_space_type) 9
816#define ACPI_ADR_SPACE_PLATFORM_COMM (acpi_adr_space_type) 10
817
818#define ACPI_NUM_PREDEFINED_REGIONS 11
819
820/*
821 * Special Address Spaces
822 *
823 * Note: A Data Table region is a special type of operation region
824 * that has its own AML opcode. However, internally, the AML
825 * interpreter simply creates an operation region with an an address
826 * space type of ACPI_ADR_SPACE_DATA_TABLE.
827 */
828#define ACPI_ADR_SPACE_DATA_TABLE (acpi_adr_space_type) 0x7E /* Internal to ACPICA only */
829#define ACPI_ADR_SPACE_FIXED_HARDWARE (acpi_adr_space_type) 0x7F
830
831/* Values for _REG connection code */
832
833#define ACPI_REG_DISCONNECT 0
834#define ACPI_REG_CONNECT 1
835
836/*
837 * bit_register IDs
838 *
839 * These values are intended to be used by the hardware interfaces
840 * and are mapped to individual bitfields defined within the ACPI
841 * registers. See the acpi_gbl_bit_register_info global table in utglobal.c
842 * for this mapping.
843 */
844
845/* PM1 Status register */
846
847#define ACPI_BITREG_TIMER_STATUS 0x00
848#define ACPI_BITREG_BUS_MASTER_STATUS 0x01
849#define ACPI_BITREG_GLOBAL_LOCK_STATUS 0x02
850#define ACPI_BITREG_POWER_BUTTON_STATUS 0x03
851#define ACPI_BITREG_SLEEP_BUTTON_STATUS 0x04
852#define ACPI_BITREG_RT_CLOCK_STATUS 0x05
853#define ACPI_BITREG_WAKE_STATUS 0x06
854#define ACPI_BITREG_PCIEXP_WAKE_STATUS 0x07
855
856/* PM1 Enable register */
857
858#define ACPI_BITREG_TIMER_ENABLE 0x08
859#define ACPI_BITREG_GLOBAL_LOCK_ENABLE 0x09
860#define ACPI_BITREG_POWER_BUTTON_ENABLE 0x0A
861#define ACPI_BITREG_SLEEP_BUTTON_ENABLE 0x0B
862#define ACPI_BITREG_RT_CLOCK_ENABLE 0x0C
863#define ACPI_BITREG_PCIEXP_WAKE_DISABLE 0x0D
864
865/* PM1 Control register */
866
867#define ACPI_BITREG_SCI_ENABLE 0x0E
868#define ACPI_BITREG_BUS_MASTER_RLD 0x0F
869#define ACPI_BITREG_GLOBAL_LOCK_RELEASE 0x10
870#define ACPI_BITREG_SLEEP_TYPE 0x11
871#define ACPI_BITREG_SLEEP_ENABLE 0x12
872
873/* PM2 Control register */
874
875#define ACPI_BITREG_ARB_DISABLE 0x13
876
877#define ACPI_BITREG_MAX 0x13
878#define ACPI_NUM_BITREG ACPI_BITREG_MAX + 1
879
880/* Status register values. A 1 clears a status bit. 0 = no effect */
881
882#define ACPI_CLEAR_STATUS 1
883
884/* Enable and Control register values */
885
886#define ACPI_ENABLE_EVENT 1
887#define ACPI_DISABLE_EVENT 0
888
889/*
890 * External ACPI object definition
891 */
892
893/*
894 * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package
895 * element or an unresolved named reference.
896 */
897union acpi_object {
898 acpi_object_type type; /* See definition of acpi_ns_type for values */
899 struct {
900 acpi_object_type type; /* ACPI_TYPE_INTEGER */
901 u64 value; /* The actual number */
902 } integer;
903
904 struct {
905 acpi_object_type type; /* ACPI_TYPE_STRING */
906 u32 length; /* # of bytes in string, excluding trailing null */
907 char *pointer; /* points to the string value */
908 } string;
909
910 struct {
911 acpi_object_type type; /* ACPI_TYPE_BUFFER */
912 u32 length; /* # of bytes in buffer */
913 u8 *pointer; /* points to the buffer */
914 } buffer;
915
916 struct {
917 acpi_object_type type; /* ACPI_TYPE_PACKAGE */
918 u32 count; /* # of elements in package */
919 union acpi_object *elements; /* Pointer to an array of ACPI_OBJECTs */
920 } package;
921
922 struct {
923 acpi_object_type type; /* ACPI_TYPE_LOCAL_REFERENCE */
924 acpi_object_type actual_type; /* Type associated with the Handle */
925 acpi_handle handle; /* object reference */
926 } reference;
927
928 struct {
929 acpi_object_type type; /* ACPI_TYPE_PROCESSOR */
930 u32 proc_id;
931 acpi_io_address pblk_address;
932 u32 pblk_length;
933 } processor;
934
935 struct {
936 acpi_object_type type; /* ACPI_TYPE_POWER */
937 u32 system_level;
938 u32 resource_order;
939 } power_resource;
940};
941
942/*
943 * List of objects, used as a parameter list for control method evaluation
944 */
945struct acpi_object_list {
946 u32 count;
947 union acpi_object *pointer;
948};
949
950/*
951 * Miscellaneous common Data Structures used by the interfaces
952 */
953#define ACPI_NO_BUFFER 0
954
955#ifdef ACPI_NO_MEM_ALLOCATIONS
956
957#define ACPI_ALLOCATE_BUFFER (acpi_size) (0)
958#define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (0)
959
960#else /* ACPI_NO_MEM_ALLOCATIONS */
961
962#define ACPI_ALLOCATE_BUFFER (acpi_size) (-1) /* Let ACPICA allocate buffer */
963#define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (-2) /* For internal use only (enables tracking) */
964
965#endif /* ACPI_NO_MEM_ALLOCATIONS */
966
967struct acpi_buffer {
968 acpi_size length; /* Length in bytes of the buffer */
969 void *pointer; /* pointer to buffer */
970};
971
972/*
973 * name_type for acpi_get_name
974 */
975#define ACPI_FULL_PATHNAME 0
976#define ACPI_SINGLE_NAME 1
977#define ACPI_FULL_PATHNAME_NO_TRAILING 2
978#define ACPI_NAME_TYPE_MAX 2
979
980/*
981 * Predefined Namespace items
982 */
983struct acpi_predefined_names {
984 const char *name;
985 u8 type;
986 char *val;
987};
988
989/*
990 * Structure and flags for acpi_get_system_info
991 */
992#define ACPI_SYS_MODE_UNKNOWN 0x0000
993#define ACPI_SYS_MODE_ACPI 0x0001
994#define ACPI_SYS_MODE_LEGACY 0x0002
995#define ACPI_SYS_MODES_MASK 0x0003
996
997/*
998 * System info returned by acpi_get_system_info()
999 */
1000struct acpi_system_info {
1001 u32 acpi_ca_version;
1002 u32 flags;
1003 u32 timer_resolution;
1004 u32 reserved1;
1005 u32 reserved2;
1006 u32 debug_level;
1007 u32 debug_layer;
1008};
1009
1010/*
1011 * System statistics returned by acpi_get_statistics()
1012 */
1013struct acpi_statistics {
1014 u32 sci_count;
1015 u32 gpe_count;
1016 u32 fixed_event_count[ACPI_NUM_FIXED_EVENTS];
1017 u32 method_count;
1018};
1019
1020/*
1021 * Types specific to the OS service interfaces
1022 */
1023typedef u32
1024 (ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context);
1025
1026typedef void
1027 (ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context);
1028
1029/*
1030 * Various handlers and callback procedures
1031 */
1032typedef
1033u32 (*acpi_sci_handler) (void *context);
1034
1035typedef
1036void (*acpi_gbl_event_handler) (u32 event_type,
1037 acpi_handle device,
1038 u32 event_number, void *context);
1039
1040#define ACPI_EVENT_TYPE_GPE 0
1041#define ACPI_EVENT_TYPE_FIXED 1
1042
1043typedef
1044u32(*acpi_event_handler) (void *context);
1045
1046typedef
1047u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context);
1048
1049typedef
1050void (*acpi_notify_handler) (acpi_handle device, u32 value, void *context);
1051
1052typedef
1053void (*acpi_object_handler) (acpi_handle object, void *data);
1054
1055typedef
1056acpi_status (*acpi_init_handler) (acpi_handle object, u32 function);
1057
1058#define ACPI_INIT_DEVICE_INI 1
1059
1060typedef
1061acpi_status (*acpi_exception_handler) (acpi_status aml_status,
1062 acpi_name name,
1063 u16 opcode,
1064 u32 aml_offset, void *context);
1065
1066/* Table Event handler (Load, load_table, etc.) and types */
1067
1068typedef
1069acpi_status (*acpi_table_handler) (u32 event, void *table, void *context);
1070
1071/* Table Event Types */
1072
1073#define ACPI_TABLE_EVENT_LOAD 0x0
1074#define ACPI_TABLE_EVENT_UNLOAD 0x1
1075#define ACPI_TABLE_EVENT_INSTALL 0x2
1076#define ACPI_TABLE_EVENT_UNINSTALL 0x3
1077#define ACPI_NUM_TABLE_EVENTS 4
1078
1079/* Address Spaces (For Operation Regions) */
1080
1081typedef
1082acpi_status (*acpi_adr_space_handler) (u32 function,
1083 acpi_physical_address address,
1084 u32 bit_width,
1085 u64 *value,
1086 void *handler_context,
1087 void *region_context);
1088
1089#define ACPI_DEFAULT_HANDLER NULL
1090
1091/* Special Context data for generic_serial_bus/general_purpose_io (ACPI 5.0) */
1092
1093struct acpi_connection_info {
1094 u8 *connection;
1095 u16 length;
1096 u8 access_length;
1097};
1098
1099typedef
1100acpi_status (*acpi_adr_space_setup) (acpi_handle region_handle,
1101 u32 function,
1102 void *handler_context,
1103 void **region_context);
1104
1105#define ACPI_REGION_ACTIVATE 0
1106#define ACPI_REGION_DEACTIVATE 1
1107
1108typedef
1109acpi_status (*acpi_walk_callback) (acpi_handle object,
1110 u32 nesting_level,
1111 void *context, void **return_value);
1112
1113typedef
1114u32 (*acpi_interface_handler) (acpi_string interface_name, u32 supported);
1115
1116/* Interrupt handler return values */
1117
1118#define ACPI_INTERRUPT_NOT_HANDLED 0x00
1119#define ACPI_INTERRUPT_HANDLED 0x01
1120
1121/* GPE handler return values */
1122
1123#define ACPI_REENABLE_GPE 0x80
1124
1125/* Length of 32-bit EISAID values when converted back to a string */
1126
1127#define ACPI_EISAID_STRING_SIZE 8 /* Includes null terminator */
1128
1129/* Length of UUID (string) values */
1130
1131#define ACPI_UUID_LENGTH 16
1132
1133/* Length of 3-byte PCI class code values when converted back to a string */
1134
1135#define ACPI_PCICLS_STRING_SIZE 7 /* Includes null terminator */
1136
1137/* Structures used for device/processor HID, UID, CID */
1138
1139struct acpi_pnp_device_id {
1140 u32 length; /* Length of string + null */
1141 char *string;
1142};
1143
1144struct acpi_pnp_device_id_list {
1145 u32 count; /* Number of IDs in Ids array */
1146 u32 list_size; /* Size of list, including ID strings */
1147 struct acpi_pnp_device_id ids[1]; /* ID array */
1148};
1149
1150/*
1151 * Structure returned from acpi_get_object_info.
1152 * Optimized for both 32-bit and 64-bit builds.
1153 */
1154struct acpi_device_info {
1155 u32 info_size; /* Size of info, including ID strings */
1156 u32 name; /* ACPI object Name */
1157 acpi_object_type type; /* ACPI object Type */
1158 u8 param_count; /* If a method, required parameter count */
1159 u16 valid; /* Indicates which optional fields are valid */
1160 u8 flags; /* Miscellaneous info */
1161 u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */
1162 u8 lowest_dstates[5]; /* _sx_w values: 0xFF indicates not valid */
1163 u64 address; /* _ADR value */
1164 struct acpi_pnp_device_id hardware_id; /* _HID value */
1165 struct acpi_pnp_device_id unique_id; /* _UID value */
1166 struct acpi_pnp_device_id class_code; /* _CLS value */
1167 struct acpi_pnp_device_id_list compatible_id_list; /* _CID list <must be last> */
1168};
1169
1170/* Values for Flags field above (acpi_get_object_info) */
1171
1172#define ACPI_PCI_ROOT_BRIDGE 0x01
1173
1174/* Flags for Valid field above (acpi_get_object_info) */
1175
1176#define ACPI_VALID_ADR 0x0002
1177#define ACPI_VALID_HID 0x0004
1178#define ACPI_VALID_UID 0x0008
1179#define ACPI_VALID_CID 0x0020
1180#define ACPI_VALID_CLS 0x0040
1181#define ACPI_VALID_SXDS 0x0100
1182#define ACPI_VALID_SXWS 0x0200
1183
1184/* Flags for _STA method */
1185
1186#define ACPI_STA_DEVICE_PRESENT 0x01
1187#define ACPI_STA_DEVICE_ENABLED 0x02
1188#define ACPI_STA_DEVICE_UI 0x04
1189#define ACPI_STA_DEVICE_FUNCTIONING 0x08
1190#define ACPI_STA_DEVICE_OK 0x08 /* Synonym */
1191#define ACPI_STA_BATTERY_PRESENT 0x10
1192
1193/* Context structs for address space handlers */
1194
1195struct acpi_pci_id {
1196 u16 segment;
1197 u16 bus;
1198 u16 device;
1199 u16 function;
1200};
1201
1202struct acpi_mem_space_context {
1203 u32 length;
1204 acpi_physical_address address;
1205 acpi_physical_address mapped_physical_address;
1206 u8 *mapped_logical_address;
1207 acpi_size mapped_length;
1208};
1209
1210/*
1211 * struct acpi_memory_list is used only if the ACPICA local cache is enabled
1212 */
1213struct acpi_memory_list {
1214 const char *list_name;
1215 void *list_head;
1216 u16 object_size;
1217 u16 max_depth;
1218 u16 current_depth;
1219
1220#ifdef ACPI_DBG_TRACK_ALLOCATIONS
1221
1222 /* Statistics for debug memory tracking only */
1223
1224 u32 total_allocated;
1225 u32 total_freed;
1226 u32 max_occupied;
1227 u32 total_size;
1228 u32 current_total_size;
1229 u32 requests;
1230 u32 hits;
1231#endif
1232};
1233
1234/* Definitions of trace event types */
1235
1236typedef enum {
1237 ACPI_TRACE_AML_METHOD,
1238 ACPI_TRACE_AML_OPCODE,
1239 ACPI_TRACE_AML_REGION
1240} acpi_trace_event_type;
1241
1242/* Definitions of _OSI support */
1243
1244#define ACPI_VENDOR_STRINGS 0x01
1245#define ACPI_FEATURE_STRINGS 0x02
1246#define ACPI_ENABLE_INTERFACES 0x00
1247#define ACPI_DISABLE_INTERFACES 0x04
1248
1249#define ACPI_DISABLE_ALL_VENDOR_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS)
1250#define ACPI_DISABLE_ALL_FEATURE_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_FEATURE_STRINGS)
1251#define ACPI_DISABLE_ALL_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS)
1252#define ACPI_ENABLE_ALL_VENDOR_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS)
1253#define ACPI_ENABLE_ALL_FEATURE_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_FEATURE_STRINGS)
1254#define ACPI_ENABLE_ALL_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS)
1255
1256#define ACPI_OSI_WIN_2000 0x01
1257#define ACPI_OSI_WIN_XP 0x02
1258#define ACPI_OSI_WIN_XP_SP1 0x03
1259#define ACPI_OSI_WINSRV_2003 0x04
1260#define ACPI_OSI_WIN_XP_SP2 0x05
1261#define ACPI_OSI_WINSRV_2003_SP1 0x06
1262#define ACPI_OSI_WIN_VISTA 0x07
1263#define ACPI_OSI_WINSRV_2008 0x08
1264#define ACPI_OSI_WIN_VISTA_SP1 0x09
1265#define ACPI_OSI_WIN_VISTA_SP2 0x0A
1266#define ACPI_OSI_WIN_7 0x0B
1267#define ACPI_OSI_WIN_8 0x0C
1268#define ACPI_OSI_WIN_8_1 0x0D
1269#define ACPI_OSI_WIN_10 0x0E
1270#define ACPI_OSI_WIN_10_RS1 0x0F
1271#define ACPI_OSI_WIN_10_RS2 0x10
1272#define ACPI_OSI_WIN_10_RS3 0x11
1273#define ACPI_OSI_WIN_10_RS4 0x12
1274#define ACPI_OSI_WIN_10_RS5 0x13
1275#define ACPI_OSI_WIN_10_19H1 0x14
1276
1277/* Definitions of getopt */
1278
1279#define ACPI_OPT_END -1
1280
1281#endif /* __ACTYPES_H__ */
1/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */
2/******************************************************************************
3 *
4 * Name: actypes.h - Common data types for the entire ACPI subsystem
5 *
6 * Copyright (C) 2000 - 2021, Intel Corp.
7 *
8 *****************************************************************************/
9
10#ifndef __ACTYPES_H__
11#define __ACTYPES_H__
12
13/* acpisrc:struct_defs -- for acpisrc conversion */
14
15/*
16 * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent
17 * header and must be either 32 or 64. 16-bit ACPICA is no longer
18 * supported, as of 12/2006.
19 */
20#ifndef ACPI_MACHINE_WIDTH
21#error ACPI_MACHINE_WIDTH not defined
22#endif
23
24/*
25 * Data type ranges
26 * Note: These macros are designed to be compiler independent as well as
27 * working around problems that some 32-bit compilers have with 64-bit
28 * constants.
29 */
30#define ACPI_UINT8_MAX (u8) (~((u8) 0)) /* 0xFF */
31#define ACPI_UINT16_MAX (u16)(~((u16) 0)) /* 0xFFFF */
32#define ACPI_UINT32_MAX (u32)(~((u32) 0)) /* 0xFFFFFFFF */
33#define ACPI_UINT64_MAX (u64)(~((u64) 0)) /* 0xFFFFFFFFFFFFFFFF */
34#define ACPI_ASCII_MAX 0x7F
35
36/*
37 * Architecture-specific ACPICA Subsystem Data Types
38 *
39 * The goal of these types is to provide source code portability across
40 * 16-bit, 32-bit, and 64-bit targets.
41 *
42 * 1) The following types are of fixed size for all targets (16/32/64):
43 *
44 * u8 Logical boolean
45 *
46 * u8 8-bit (1 byte) unsigned value
47 * u16 16-bit (2 byte) unsigned value
48 * u32 32-bit (4 byte) unsigned value
49 * u64 64-bit (8 byte) unsigned value
50 *
51 * s16 16-bit (2 byte) signed value
52 * s32 32-bit (4 byte) signed value
53 * s64 64-bit (8 byte) signed value
54 *
55 * COMPILER_DEPENDENT_UINT64/s64 - These types are defined in the
56 * compiler-dependent header(s) and were introduced because there is no
57 * common 64-bit integer type across the various compilation models, as
58 * shown in the table below.
59 *
60 * Datatype LP64 ILP64 LLP64 ILP32 LP32 16bit
61 * char 8 8 8 8 8 8
62 * short 16 16 16 16 16 16
63 * _int32 32
64 * int 32 64 32 32 16 16
65 * long 64 64 32 32 32 32
66 * long long 64 64
67 * pointer 64 64 64 32 32 32
68 *
69 * Note: ILP64 and LP32 are currently not supported.
70 *
71 *
72 * 2) These types represent the native word size of the target mode of the
73 * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are
74 * usually used for memory allocation, efficient loop counters, and array
75 * indexes. The types are similar to the size_t type in the C library and
76 * are required because there is no C type that consistently represents the
77 * native data width. acpi_size is needed because there is no guarantee
78 * that a kernel-level C library is present.
79 *
80 * acpi_size 16/32/64-bit unsigned value
81 * acpi_native_int 16/32/64-bit signed value
82 */
83
84/*******************************************************************************
85 *
86 * Common types for all compilers, all targets
87 *
88 ******************************************************************************/
89
90#ifndef ACPI_USE_SYSTEM_INTTYPES
91
92typedef unsigned char u8;
93typedef unsigned short u16;
94typedef short s16;
95typedef COMPILER_DEPENDENT_UINT64 u64;
96typedef COMPILER_DEPENDENT_INT64 s64;
97
98#endif /* ACPI_USE_SYSTEM_INTTYPES */
99
100/*
101 * Value returned by acpi_os_get_thread_id. There is no standard "thread_id"
102 * across operating systems or even the various UNIX systems. Since ACPICA
103 * only needs the thread ID as a unique thread identifier, we use a u64
104 * as the only common data type - it will accommodate any type of pointer or
105 * any type of integer. It is up to the host-dependent OSL to cast the
106 * native thread ID type to a u64 (in acpi_os_get_thread_id).
107 */
108#define acpi_thread_id u64
109
110/*******************************************************************************
111 *
112 * Types specific to 64-bit targets
113 *
114 ******************************************************************************/
115
116#if ACPI_MACHINE_WIDTH == 64
117
118#ifndef ACPI_USE_SYSTEM_INTTYPES
119
120typedef unsigned int u32;
121typedef int s32;
122
123#endif /* ACPI_USE_SYSTEM_INTTYPES */
124
125typedef s64 acpi_native_int;
126
127typedef u64 acpi_size;
128typedef u64 acpi_io_address;
129typedef u64 acpi_physical_address;
130
131#define ACPI_MAX_PTR ACPI_UINT64_MAX
132#define ACPI_SIZE_MAX ACPI_UINT64_MAX
133
134#define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */
135#define ACPI_USE_NATIVE_MATH64 /* Has native 64-bit integer support */
136
137/*
138 * In the case of the Itanium Processor Family (IPF), the hardware does not
139 * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED
140 * flag to indicate that special precautions must be taken to avoid alignment
141 * faults. (IA64 or ia64 is currently used by existing compilers to indicate
142 * IPF.)
143 *
144 * Note: EM64T and other X86-64 processors support misaligned transfers,
145 * so there is no need to define this flag.
146 */
147#if defined (__IA64__) || defined (__ia64__)
148#define ACPI_MISALIGNMENT_NOT_SUPPORTED
149#endif
150
151/*******************************************************************************
152 *
153 * Types specific to 32-bit targets
154 *
155 ******************************************************************************/
156
157#elif ACPI_MACHINE_WIDTH == 32
158
159#ifndef ACPI_USE_SYSTEM_INTTYPES
160
161typedef unsigned int u32;
162typedef int s32;
163
164#endif /* ACPI_USE_SYSTEM_INTTYPES */
165
166typedef s32 acpi_native_int;
167
168typedef u32 acpi_size;
169
170#ifdef ACPI_32BIT_PHYSICAL_ADDRESS
171
172/*
173 * OSPMs can define this to shrink the size of the structures for 32-bit
174 * none PAE environment. ASL compiler may always define this to generate
175 * 32-bit OSPM compliant tables.
176 */
177typedef u32 acpi_io_address;
178typedef u32 acpi_physical_address;
179
180#else /* ACPI_32BIT_PHYSICAL_ADDRESS */
181
182/*
183 * It is reported that, after some calculations, the physical addresses can
184 * wrap over the 32-bit boundary on 32-bit PAE environment.
185 * https://bugzilla.kernel.org/show_bug.cgi?id=87971
186 */
187typedef u64 acpi_io_address;
188typedef u64 acpi_physical_address;
189
190#endif /* ACPI_32BIT_PHYSICAL_ADDRESS */
191
192#define ACPI_MAX_PTR ACPI_UINT32_MAX
193#define ACPI_SIZE_MAX ACPI_UINT32_MAX
194
195#else
196
197/* ACPI_MACHINE_WIDTH must be either 64 or 32 */
198
199#error unknown ACPI_MACHINE_WIDTH
200#endif
201
202/*******************************************************************************
203 *
204 * OS-dependent types
205 *
206 * If the defaults below are not appropriate for the host system, they can
207 * be defined in the OS-specific header, and this will take precedence.
208 *
209 ******************************************************************************/
210
211/* Flags for acpi_os_acquire_lock/acpi_os_release_lock */
212
213#ifndef acpi_cpu_flags
214#define acpi_cpu_flags acpi_size
215#endif
216
217/* Object returned from acpi_os_create_cache */
218
219#ifndef acpi_cache_t
220#ifdef ACPI_USE_LOCAL_CACHE
221#define acpi_cache_t struct acpi_memory_list
222#else
223#define acpi_cache_t void *
224#endif
225#endif
226
227/*
228 * Synchronization objects - Mutexes, Semaphores, and spin_locks
229 */
230#if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE)
231/*
232 * These macros are used if the host OS does not support a mutex object.
233 * Map the OSL Mutex interfaces to binary semaphores.
234 */
235#define acpi_mutex acpi_semaphore
236#define acpi_os_create_mutex(out_handle) acpi_os_create_semaphore (1, 1, out_handle)
237#define acpi_os_delete_mutex(handle) (void) acpi_os_delete_semaphore (handle)
238#define acpi_os_acquire_mutex(handle,time) acpi_os_wait_semaphore (handle, 1, time)
239#define acpi_os_release_mutex(handle) (void) acpi_os_signal_semaphore (handle, 1)
240#endif
241
242/* Configurable types for synchronization objects */
243
244#ifndef acpi_spinlock
245#define acpi_spinlock void *
246#endif
247
248#ifndef acpi_raw_spinlock
249#define acpi_raw_spinlock acpi_spinlock
250#endif
251
252#ifndef acpi_semaphore
253#define acpi_semaphore void *
254#endif
255
256#ifndef acpi_mutex
257#define acpi_mutex void *
258#endif
259
260/*******************************************************************************
261 *
262 * Compiler-dependent types
263 *
264 * If the defaults below are not appropriate for the host compiler, they can
265 * be defined in the compiler-specific header, and this will take precedence.
266 *
267 ******************************************************************************/
268
269/* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */
270
271#ifndef acpi_uintptr_t
272#define acpi_uintptr_t void *
273#endif
274
275/*
276 * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because
277 * some compilers can catch printf format string problems
278 */
279#ifndef ACPI_PRINTF_LIKE
280#define ACPI_PRINTF_LIKE(c)
281#endif
282
283/*
284 * Some compilers complain about unused variables. Sometimes we don't want
285 * to use all the variables (for example, _acpi_module_name). This allows us
286 * to tell the compiler in a per-variable manner that a variable
287 * is unused
288 */
289#ifndef ACPI_UNUSED_VAR
290#define ACPI_UNUSED_VAR
291#endif
292
293/*
294 * All ACPICA external functions that are available to the rest of the
295 * kernel are tagged with these macros which can be defined as appropriate
296 * for the host.
297 *
298 * Notes:
299 * ACPI_EXPORT_SYMBOL_INIT is used for initialization and termination
300 * interfaces that may need special processing.
301 * ACPI_EXPORT_SYMBOL is used for all other public external functions.
302 */
303#ifndef ACPI_EXPORT_SYMBOL_INIT
304#define ACPI_EXPORT_SYMBOL_INIT(symbol)
305#endif
306
307#ifndef ACPI_EXPORT_SYMBOL
308#define ACPI_EXPORT_SYMBOL(symbol)
309#endif
310
311/*
312 * Compiler/Clibrary-dependent debug initialization. Used for ACPICA
313 * utilities only.
314 */
315#ifndef ACPI_DEBUG_INITIALIZE
316#define ACPI_DEBUG_INITIALIZE()
317#endif
318
319/*******************************************************************************
320 *
321 * Configuration
322 *
323 ******************************************************************************/
324
325#ifdef ACPI_NO_MEM_ALLOCATIONS
326
327#define ACPI_ALLOCATE(a) NULL
328#define ACPI_ALLOCATE_ZEROED(a) NULL
329#define ACPI_FREE(a)
330#define ACPI_MEM_TRACKING(a)
331
332#else /* ACPI_NO_MEM_ALLOCATIONS */
333
334#ifdef ACPI_DBG_TRACK_ALLOCATIONS
335/*
336 * Memory allocation tracking (used by acpi_exec to detect memory leaks)
337 */
338#define ACPI_MEM_PARAMETERS _COMPONENT, _acpi_module_name, __LINE__
339#define ACPI_ALLOCATE(a) acpi_ut_allocate_and_track ((acpi_size) (a), ACPI_MEM_PARAMETERS)
340#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed_and_track ((acpi_size) (a), ACPI_MEM_PARAMETERS)
341#define ACPI_FREE(a) acpi_ut_free_and_track (a, ACPI_MEM_PARAMETERS)
342#define ACPI_MEM_TRACKING(a) a
343
344#else
345/*
346 * Normal memory allocation directly via the OS services layer
347 */
348#define ACPI_ALLOCATE(a) acpi_os_allocate ((acpi_size) (a))
349#define ACPI_ALLOCATE_ZEROED(a) acpi_os_allocate_zeroed ((acpi_size) (a))
350#define ACPI_FREE(a) acpi_os_free (a)
351#define ACPI_MEM_TRACKING(a)
352
353#endif /* ACPI_DBG_TRACK_ALLOCATIONS */
354
355#endif /* ACPI_NO_MEM_ALLOCATIONS */
356
357/******************************************************************************
358 *
359 * ACPI Specification constants (Do not change unless the specification
360 * changes)
361 *
362 *****************************************************************************/
363
364/* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */
365
366#define ACPI_MAX_GPE_BLOCKS 2
367
368/* Default ACPI register widths */
369
370#define ACPI_GPE_REGISTER_WIDTH 8
371#define ACPI_PM1_REGISTER_WIDTH 16
372#define ACPI_PM2_REGISTER_WIDTH 8
373#define ACPI_PM_TIMER_WIDTH 32
374#define ACPI_RESET_REGISTER_WIDTH 8
375
376/* Names within the namespace are 4 bytes long */
377
378#define ACPI_NAMESEG_SIZE 4 /* Fixed by ACPI spec */
379#define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */
380#define ACPI_PATH_SEPARATOR '.'
381
382/* Sizes for ACPI table headers */
383
384#define ACPI_OEM_ID_SIZE 6
385#define ACPI_OEM_TABLE_ID_SIZE 8
386
387/* ACPI/PNP hardware IDs */
388
389#define PCI_ROOT_HID_STRING "PNP0A03"
390#define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08"
391
392/* PM Timer ticks per second (HZ) */
393
394#define ACPI_PM_TIMER_FREQUENCY 3579545
395
396/*******************************************************************************
397 *
398 * Independent types
399 *
400 ******************************************************************************/
401
402/* Logical defines and NULL */
403
404#ifdef FALSE
405#undef FALSE
406#endif
407#define FALSE (1 == 0)
408
409#ifdef TRUE
410#undef TRUE
411#endif
412#define TRUE (1 == 1)
413
414#ifndef NULL
415#define NULL (void *) 0
416#endif
417
418/*
419 * Miscellaneous types
420 */
421typedef u32 acpi_status; /* All ACPI Exceptions */
422typedef u32 acpi_name; /* 4-byte ACPI name */
423typedef char *acpi_string; /* Null terminated ASCII string */
424typedef void *acpi_handle; /* Actually a ptr to a NS Node */
425
426/* Time constants for timer calculations */
427
428#define ACPI_MSEC_PER_SEC 1000L
429
430#define ACPI_USEC_PER_MSEC 1000L
431#define ACPI_USEC_PER_SEC 1000000L
432
433#define ACPI_100NSEC_PER_USEC 10L
434#define ACPI_100NSEC_PER_MSEC 10000L
435#define ACPI_100NSEC_PER_SEC 10000000L
436
437#define ACPI_NSEC_PER_USEC 1000L
438#define ACPI_NSEC_PER_MSEC 1000000L
439#define ACPI_NSEC_PER_SEC 1000000000L
440
441#define ACPI_TIME_AFTER(a, b) ((s64)((b) - (a)) < 0)
442
443/* Owner IDs are used to track namespace nodes for selective deletion */
444
445typedef u16 acpi_owner_id;
446#define ACPI_OWNER_ID_MAX 0xFFF /* 4095 possible owner IDs */
447
448#define ACPI_INTEGER_BIT_SIZE 64
449#define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */
450#define ACPI_MAX64_DECIMAL_DIGITS 20
451#define ACPI_MAX32_DECIMAL_DIGITS 10
452#define ACPI_MAX16_DECIMAL_DIGITS 5
453#define ACPI_MAX8_DECIMAL_DIGITS 3
454
455/*
456 * Constants with special meanings
457 */
458#define ACPI_ROOT_OBJECT ((acpi_handle) ACPI_TO_POINTER (ACPI_MAX_PTR))
459#define ACPI_WAIT_FOREVER 0xFFFF /* u16, as per ACPI spec */
460#define ACPI_DO_NOT_WAIT 0
461
462/*
463 * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are
464 * 32 bits. In ACPI version 2 (2000) and later, integers are max 64 bits.
465 * Note that this pertains to the ACPI integer type only, not to other
466 * integers used in the implementation of the ACPICA subsystem.
467 *
468 * 01/2010: This type is obsolete and has been removed from the entire ACPICA
469 * code base. It remains here for compatibility with device drivers that use
470 * the type. However, it will be removed in the future.
471 */
472typedef u64 acpi_integer;
473#define ACPI_INTEGER_MAX ACPI_UINT64_MAX
474
475/*******************************************************************************
476 *
477 * Commonly used macros
478 *
479 ******************************************************************************/
480
481/* Data manipulation */
482
483#define ACPI_LOBYTE(integer) ((u8) (u16)(integer))
484#define ACPI_HIBYTE(integer) ((u8) (((u16)(integer)) >> 8))
485#define ACPI_LOWORD(integer) ((u16) (u32)(integer))
486#define ACPI_HIWORD(integer) ((u16)(((u32)(integer)) >> 16))
487#define ACPI_LODWORD(integer64) ((u32) (u64)(integer64))
488#define ACPI_HIDWORD(integer64) ((u32)(((u64)(integer64)) >> 32))
489
490#define ACPI_SET_BIT(target,bit) ((target) |= (bit))
491#define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit))
492#define ACPI_MIN(a,b) (((a)<(b))?(a):(b))
493#define ACPI_MAX(a,b) (((a)>(b))?(a):(b))
494
495/* Size calculation */
496
497#define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0]))
498
499/* Pointer manipulation */
500
501#define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p))
502#define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p))
503#define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b)))
504#define ACPI_SUB_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) - (acpi_size)(b)))
505#define ACPI_PTR_DIFF(a, b) ((acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b))))
506
507/* Pointer/Integer type conversions */
508
509#define ACPI_TO_POINTER(i) ACPI_CAST_PTR (void, (acpi_size) (i))
510#define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) 0)
511#define ACPI_OFFSET(d, f) ACPI_PTR_DIFF (&(((d *) 0)->f), (void *) 0)
512#define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i)
513#define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i)
514
515/* Optimizations for 4-character (32-bit) acpi_name manipulation */
516
517#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
518#define ACPI_COMPARE_NAMESEG(a,b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b)))
519#define ACPI_COPY_NAMESEG(dest,src) (*ACPI_CAST_PTR (u32, (dest)) = *ACPI_CAST_PTR (u32, (src)))
520#else
521#define ACPI_COMPARE_NAMESEG(a,b) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAMESEG_SIZE))
522#define ACPI_COPY_NAMESEG(dest,src) (strncpy (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAMESEG_SIZE))
523#endif
524
525/* Support for the special RSDP signature (8 characters) */
526
527#define ACPI_VALIDATE_RSDP_SIG(a) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_SIG_RSDP, 8))
528#define ACPI_MAKE_RSDP_SIG(dest) (memcpy (ACPI_CAST_PTR (char, (dest)), ACPI_SIG_RSDP, 8))
529
530/* Support for OEMx signature (x can be any character) */
531#define ACPI_IS_OEM_SIG(a) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_OEM_NAME, 3) &&\
532 strnlen (a, ACPI_NAMESEG_SIZE) == ACPI_NAMESEG_SIZE)
533
534/*
535 * Algorithm to obtain access bit or byte width.
536 * Can be used with access_width of struct acpi_generic_address and access_size of
537 * struct acpi_resource_generic_register.
538 */
539#define ACPI_ACCESS_BIT_WIDTH(size) (1 << ((size) + 2))
540#define ACPI_ACCESS_BYTE_WIDTH(size) (1 << ((size) - 1))
541
542/*******************************************************************************
543 *
544 * Miscellaneous constants
545 *
546 ******************************************************************************/
547
548/*
549 * Initialization sequence options
550 */
551#define ACPI_FULL_INITIALIZATION 0x0000
552#define ACPI_NO_FACS_INIT 0x0001
553#define ACPI_NO_ACPI_ENABLE 0x0002
554#define ACPI_NO_HARDWARE_INIT 0x0004
555#define ACPI_NO_EVENT_INIT 0x0008
556#define ACPI_NO_HANDLER_INIT 0x0010
557#define ACPI_NO_OBJECT_INIT 0x0020
558#define ACPI_NO_DEVICE_INIT 0x0040
559#define ACPI_NO_ADDRESS_SPACE_INIT 0x0080
560
561/*
562 * Initialization state
563 */
564#define ACPI_SUBSYSTEM_INITIALIZE 0x01
565#define ACPI_INITIALIZED_OK 0x02
566
567/*
568 * Power state values
569 */
570#define ACPI_STATE_UNKNOWN (u8) 0xFF
571
572#define ACPI_STATE_S0 (u8) 0
573#define ACPI_STATE_S1 (u8) 1
574#define ACPI_STATE_S2 (u8) 2
575#define ACPI_STATE_S3 (u8) 3
576#define ACPI_STATE_S4 (u8) 4
577#define ACPI_STATE_S5 (u8) 5
578#define ACPI_S_STATES_MAX ACPI_STATE_S5
579#define ACPI_S_STATE_COUNT 6
580
581#define ACPI_STATE_D0 (u8) 0
582#define ACPI_STATE_D1 (u8) 1
583#define ACPI_STATE_D2 (u8) 2
584#define ACPI_STATE_D3_HOT (u8) 3
585#define ACPI_STATE_D3 (u8) 4
586#define ACPI_STATE_D3_COLD ACPI_STATE_D3
587#define ACPI_D_STATES_MAX ACPI_STATE_D3
588#define ACPI_D_STATE_COUNT 5
589
590#define ACPI_STATE_C0 (u8) 0
591#define ACPI_STATE_C1 (u8) 1
592#define ACPI_STATE_C2 (u8) 2
593#define ACPI_STATE_C3 (u8) 3
594#define ACPI_C_STATES_MAX ACPI_STATE_C3
595#define ACPI_C_STATE_COUNT 4
596
597/*
598 * Sleep type invalid value
599 */
600#define ACPI_SLEEP_TYPE_MAX 0x7
601#define ACPI_SLEEP_TYPE_INVALID 0xFF
602
603/*
604 * Standard notify values
605 */
606#define ACPI_NOTIFY_BUS_CHECK (u8) 0x00
607#define ACPI_NOTIFY_DEVICE_CHECK (u8) 0x01
608#define ACPI_NOTIFY_DEVICE_WAKE (u8) 0x02
609#define ACPI_NOTIFY_EJECT_REQUEST (u8) 0x03
610#define ACPI_NOTIFY_DEVICE_CHECK_LIGHT (u8) 0x04
611#define ACPI_NOTIFY_FREQUENCY_MISMATCH (u8) 0x05
612#define ACPI_NOTIFY_BUS_MODE_MISMATCH (u8) 0x06
613#define ACPI_NOTIFY_POWER_FAULT (u8) 0x07
614#define ACPI_NOTIFY_CAPABILITIES_CHECK (u8) 0x08
615#define ACPI_NOTIFY_DEVICE_PLD_CHECK (u8) 0x09
616#define ACPI_NOTIFY_RESERVED (u8) 0x0A
617#define ACPI_NOTIFY_LOCALITY_UPDATE (u8) 0x0B
618#define ACPI_NOTIFY_SHUTDOWN_REQUEST (u8) 0x0C
619#define ACPI_NOTIFY_AFFINITY_UPDATE (u8) 0x0D
620#define ACPI_NOTIFY_MEMORY_UPDATE (u8) 0x0E
621#define ACPI_NOTIFY_DISCONNECT_RECOVER (u8) 0x0F
622
623#define ACPI_GENERIC_NOTIFY_MAX 0x0F
624#define ACPI_SPECIFIC_NOTIFY_MAX 0x84
625
626/*
627 * Types associated with ACPI names and objects. The first group of
628 * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition
629 * of the ACPI object_type() operator (See the ACPI Spec). Therefore,
630 * only add to the first group if the spec changes.
631 *
632 * NOTE: Types must be kept in sync with the global acpi_ns_properties
633 * and acpi_ns_type_names arrays.
634 */
635typedef u32 acpi_object_type;
636
637#define ACPI_TYPE_ANY 0x00
638#define ACPI_TYPE_INTEGER 0x01 /* Byte/Word/Dword/Zero/One/Ones */
639#define ACPI_TYPE_STRING 0x02
640#define ACPI_TYPE_BUFFER 0x03
641#define ACPI_TYPE_PACKAGE 0x04 /* byte_const, multiple data_term/Constant/super_name */
642#define ACPI_TYPE_FIELD_UNIT 0x05
643#define ACPI_TYPE_DEVICE 0x06 /* Name, multiple Node */
644#define ACPI_TYPE_EVENT 0x07
645#define ACPI_TYPE_METHOD 0x08 /* Name, byte_const, multiple Code */
646#define ACPI_TYPE_MUTEX 0x09
647#define ACPI_TYPE_REGION 0x0A
648#define ACPI_TYPE_POWER 0x0B /* Name,byte_const,word_const,multi Node */
649#define ACPI_TYPE_PROCESSOR 0x0C /* Name,byte_const,Dword_const,byte_const,multi nm_o */
650#define ACPI_TYPE_THERMAL 0x0D /* Name, multiple Node */
651#define ACPI_TYPE_BUFFER_FIELD 0x0E
652#define ACPI_TYPE_DDB_HANDLE 0x0F
653#define ACPI_TYPE_DEBUG_OBJECT 0x10
654
655#define ACPI_TYPE_EXTERNAL_MAX 0x10
656#define ACPI_NUM_TYPES (ACPI_TYPE_EXTERNAL_MAX + 1)
657
658/*
659 * These are object types that do not map directly to the ACPI
660 * object_type() operator. They are used for various internal purposes
661 * only. If new predefined ACPI_TYPEs are added (via the ACPI
662 * specification), these internal types must move upwards. (There
663 * is code that depends on these values being contiguous with the
664 * external types above.)
665 */
666#define ACPI_TYPE_LOCAL_REGION_FIELD 0x11
667#define ACPI_TYPE_LOCAL_BANK_FIELD 0x12
668#define ACPI_TYPE_LOCAL_INDEX_FIELD 0x13
669#define ACPI_TYPE_LOCAL_REFERENCE 0x14 /* Arg#, Local#, Name, Debug, ref_of, Index */
670#define ACPI_TYPE_LOCAL_ALIAS 0x15
671#define ACPI_TYPE_LOCAL_METHOD_ALIAS 0x16
672#define ACPI_TYPE_LOCAL_NOTIFY 0x17
673#define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18
674#define ACPI_TYPE_LOCAL_RESOURCE 0x19
675#define ACPI_TYPE_LOCAL_RESOURCE_FIELD 0x1A
676#define ACPI_TYPE_LOCAL_SCOPE 0x1B /* 1 Name, multiple object_list Nodes */
677
678#define ACPI_TYPE_NS_NODE_MAX 0x1B /* Last typecode used within a NS Node */
679#define ACPI_TOTAL_TYPES (ACPI_TYPE_NS_NODE_MAX + 1)
680
681/*
682 * These are special object types that never appear in
683 * a Namespace node, only in an object of union acpi_operand_object
684 */
685#define ACPI_TYPE_LOCAL_EXTRA 0x1C
686#define ACPI_TYPE_LOCAL_DATA 0x1D
687
688#define ACPI_TYPE_LOCAL_MAX 0x1D
689
690/* All types above here are invalid */
691
692#define ACPI_TYPE_INVALID 0x1E
693#define ACPI_TYPE_NOT_FOUND 0xFF
694
695#define ACPI_NUM_NS_TYPES (ACPI_TYPE_INVALID + 1)
696
697/*
698 * All I/O
699 */
700#define ACPI_READ 0
701#define ACPI_WRITE 1
702#define ACPI_IO_MASK 1
703
704/*
705 * Event Types: Fixed & General Purpose
706 */
707typedef u32 acpi_event_type;
708
709/*
710 * Fixed events
711 */
712#define ACPI_EVENT_PMTIMER 0
713#define ACPI_EVENT_GLOBAL 1
714#define ACPI_EVENT_POWER_BUTTON 2
715#define ACPI_EVENT_SLEEP_BUTTON 3
716#define ACPI_EVENT_RTC 4
717#define ACPI_EVENT_MAX 4
718#define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1
719
720/*
721 * Event status - Per event
722 * -------------
723 * The encoding of acpi_event_status is illustrated below.
724 * Note that a set bit (1) indicates the property is TRUE
725 * (e.g. if bit 0 is set then the event is enabled).
726 * +-------------+-+-+-+-+-+-+
727 * | Bits 31:6 |5|4|3|2|1|0|
728 * +-------------+-+-+-+-+-+-+
729 * | | | | | | |
730 * | | | | | | +- Enabled?
731 * | | | | | +--- Enabled for wake?
732 * | | | | +----- Status bit set?
733 * | | | +------- Enable bit set?
734 * | | +--------- Has a handler?
735 * | +----------- Masked?
736 * +----------------- <Reserved>
737 */
738typedef u32 acpi_event_status;
739
740#define ACPI_EVENT_FLAG_DISABLED (acpi_event_status) 0x00
741#define ACPI_EVENT_FLAG_ENABLED (acpi_event_status) 0x01
742#define ACPI_EVENT_FLAG_WAKE_ENABLED (acpi_event_status) 0x02
743#define ACPI_EVENT_FLAG_STATUS_SET (acpi_event_status) 0x04
744#define ACPI_EVENT_FLAG_ENABLE_SET (acpi_event_status) 0x08
745#define ACPI_EVENT_FLAG_HAS_HANDLER (acpi_event_status) 0x10
746#define ACPI_EVENT_FLAG_MASKED (acpi_event_status) 0x20
747#define ACPI_EVENT_FLAG_SET ACPI_EVENT_FLAG_STATUS_SET
748
749/* Actions for acpi_set_gpe, acpi_gpe_wakeup, acpi_hw_low_set_gpe */
750
751#define ACPI_GPE_ENABLE 0
752#define ACPI_GPE_DISABLE 1
753#define ACPI_GPE_CONDITIONAL_ENABLE 2
754
755/*
756 * GPE info flags - Per GPE
757 * +---+-+-+-+---+
758 * |7:6|5|4|3|2:0|
759 * +---+-+-+-+---+
760 * | | | | |
761 * | | | | +-- Type of dispatch:to method, handler, notify, or none
762 * | | | +----- Interrupt type: edge or level triggered
763 * | | +------- Is a Wake GPE
764 * | +--------- Has been enabled automatically at init time
765 * +------------ <Reserved>
766 */
767#define ACPI_GPE_DISPATCH_NONE (u8) 0x00
768#define ACPI_GPE_DISPATCH_METHOD (u8) 0x01
769#define ACPI_GPE_DISPATCH_HANDLER (u8) 0x02
770#define ACPI_GPE_DISPATCH_NOTIFY (u8) 0x03
771#define ACPI_GPE_DISPATCH_RAW_HANDLER (u8) 0x04
772#define ACPI_GPE_DISPATCH_MASK (u8) 0x07
773#define ACPI_GPE_DISPATCH_TYPE(flags) ((u8) ((flags) & ACPI_GPE_DISPATCH_MASK))
774
775#define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x08
776#define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00
777#define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x08
778
779#define ACPI_GPE_CAN_WAKE (u8) 0x10
780#define ACPI_GPE_AUTO_ENABLED (u8) 0x20
781#define ACPI_GPE_INITIALIZED (u8) 0x40
782
783/*
784 * Flags for GPE and Lock interfaces
785 */
786#define ACPI_NOT_ISR 0x1
787#define ACPI_ISR 0x0
788
789/* Notify types */
790
791#define ACPI_SYSTEM_NOTIFY 0x1
792#define ACPI_DEVICE_NOTIFY 0x2
793#define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY)
794#define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3
795#define ACPI_NUM_NOTIFY_TYPES 2
796
797#define ACPI_MAX_SYS_NOTIFY 0x7F
798#define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF
799
800#define ACPI_SYSTEM_HANDLER_LIST 0 /* Used as index, must be SYSTEM_NOTIFY -1 */
801#define ACPI_DEVICE_HANDLER_LIST 1 /* Used as index, must be DEVICE_NOTIFY -1 */
802
803/* Address Space (Operation Region) Types */
804
805typedef u8 acpi_adr_space_type;
806
807#define ACPI_ADR_SPACE_SYSTEM_MEMORY (acpi_adr_space_type) 0
808#define ACPI_ADR_SPACE_SYSTEM_IO (acpi_adr_space_type) 1
809#define ACPI_ADR_SPACE_PCI_CONFIG (acpi_adr_space_type) 2
810#define ACPI_ADR_SPACE_EC (acpi_adr_space_type) 3
811#define ACPI_ADR_SPACE_SMBUS (acpi_adr_space_type) 4
812#define ACPI_ADR_SPACE_CMOS (acpi_adr_space_type) 5
813#define ACPI_ADR_SPACE_PCI_BAR_TARGET (acpi_adr_space_type) 6
814#define ACPI_ADR_SPACE_IPMI (acpi_adr_space_type) 7
815#define ACPI_ADR_SPACE_GPIO (acpi_adr_space_type) 8
816#define ACPI_ADR_SPACE_GSBUS (acpi_adr_space_type) 9
817#define ACPI_ADR_SPACE_PLATFORM_COMM (acpi_adr_space_type) 10
818#define ACPI_ADR_SPACE_PLATFORM_RT (acpi_adr_space_type) 11
819
820#define ACPI_NUM_PREDEFINED_REGIONS 12
821
822/*
823 * Special Address Spaces
824 *
825 * Note: A Data Table region is a special type of operation region
826 * that has its own AML opcode. However, internally, the AML
827 * interpreter simply creates an operation region with an address
828 * space type of ACPI_ADR_SPACE_DATA_TABLE.
829 */
830#define ACPI_ADR_SPACE_DATA_TABLE (acpi_adr_space_type) 0x7E /* Internal to ACPICA only */
831#define ACPI_ADR_SPACE_FIXED_HARDWARE (acpi_adr_space_type) 0x7F
832
833/* Values for _REG connection code */
834
835#define ACPI_REG_DISCONNECT 0
836#define ACPI_REG_CONNECT 1
837
838/*
839 * bit_register IDs
840 *
841 * These values are intended to be used by the hardware interfaces
842 * and are mapped to individual bitfields defined within the ACPI
843 * registers. See the acpi_gbl_bit_register_info global table in utglobal.c
844 * for this mapping.
845 */
846
847/* PM1 Status register */
848
849#define ACPI_BITREG_TIMER_STATUS 0x00
850#define ACPI_BITREG_BUS_MASTER_STATUS 0x01
851#define ACPI_BITREG_GLOBAL_LOCK_STATUS 0x02
852#define ACPI_BITREG_POWER_BUTTON_STATUS 0x03
853#define ACPI_BITREG_SLEEP_BUTTON_STATUS 0x04
854#define ACPI_BITREG_RT_CLOCK_STATUS 0x05
855#define ACPI_BITREG_WAKE_STATUS 0x06
856#define ACPI_BITREG_PCIEXP_WAKE_STATUS 0x07
857
858/* PM1 Enable register */
859
860#define ACPI_BITREG_TIMER_ENABLE 0x08
861#define ACPI_BITREG_GLOBAL_LOCK_ENABLE 0x09
862#define ACPI_BITREG_POWER_BUTTON_ENABLE 0x0A
863#define ACPI_BITREG_SLEEP_BUTTON_ENABLE 0x0B
864#define ACPI_BITREG_RT_CLOCK_ENABLE 0x0C
865#define ACPI_BITREG_PCIEXP_WAKE_DISABLE 0x0D
866
867/* PM1 Control register */
868
869#define ACPI_BITREG_SCI_ENABLE 0x0E
870#define ACPI_BITREG_BUS_MASTER_RLD 0x0F
871#define ACPI_BITREG_GLOBAL_LOCK_RELEASE 0x10
872#define ACPI_BITREG_SLEEP_TYPE 0x11
873#define ACPI_BITREG_SLEEP_ENABLE 0x12
874
875/* PM2 Control register */
876
877#define ACPI_BITREG_ARB_DISABLE 0x13
878
879#define ACPI_BITREG_MAX 0x13
880#define ACPI_NUM_BITREG ACPI_BITREG_MAX + 1
881
882/* Status register values. A 1 clears a status bit. 0 = no effect */
883
884#define ACPI_CLEAR_STATUS 1
885
886/* Enable and Control register values */
887
888#define ACPI_ENABLE_EVENT 1
889#define ACPI_DISABLE_EVENT 0
890
891/*
892 * External ACPI object definition
893 */
894
895/*
896 * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package
897 * element or an unresolved named reference.
898 */
899union acpi_object {
900 acpi_object_type type; /* See definition of acpi_ns_type for values */
901 struct {
902 acpi_object_type type; /* ACPI_TYPE_INTEGER */
903 u64 value; /* The actual number */
904 } integer;
905
906 struct {
907 acpi_object_type type; /* ACPI_TYPE_STRING */
908 u32 length; /* # of bytes in string, excluding trailing null */
909 char *pointer; /* points to the string value */
910 } string;
911
912 struct {
913 acpi_object_type type; /* ACPI_TYPE_BUFFER */
914 u32 length; /* # of bytes in buffer */
915 u8 *pointer; /* points to the buffer */
916 } buffer;
917
918 struct {
919 acpi_object_type type; /* ACPI_TYPE_PACKAGE */
920 u32 count; /* # of elements in package */
921 union acpi_object *elements; /* Pointer to an array of ACPI_OBJECTs */
922 } package;
923
924 struct {
925 acpi_object_type type; /* ACPI_TYPE_LOCAL_REFERENCE */
926 acpi_object_type actual_type; /* Type associated with the Handle */
927 acpi_handle handle; /* object reference */
928 } reference;
929
930 struct {
931 acpi_object_type type; /* ACPI_TYPE_PROCESSOR */
932 u32 proc_id;
933 acpi_io_address pblk_address;
934 u32 pblk_length;
935 } processor;
936
937 struct {
938 acpi_object_type type; /* ACPI_TYPE_POWER */
939 u32 system_level;
940 u32 resource_order;
941 } power_resource;
942};
943
944/*
945 * List of objects, used as a parameter list for control method evaluation
946 */
947struct acpi_object_list {
948 u32 count;
949 union acpi_object *pointer;
950};
951
952/*
953 * Miscellaneous common Data Structures used by the interfaces
954 */
955#define ACPI_NO_BUFFER 0
956
957#ifdef ACPI_NO_MEM_ALLOCATIONS
958
959#define ACPI_ALLOCATE_BUFFER (acpi_size) (0)
960#define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (0)
961
962#else /* ACPI_NO_MEM_ALLOCATIONS */
963
964#define ACPI_ALLOCATE_BUFFER (acpi_size) (-1) /* Let ACPICA allocate buffer */
965#define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (-2) /* For internal use only (enables tracking) */
966
967#endif /* ACPI_NO_MEM_ALLOCATIONS */
968
969struct acpi_buffer {
970 acpi_size length; /* Length in bytes of the buffer */
971 void *pointer; /* pointer to buffer */
972};
973
974/*
975 * name_type for acpi_get_name
976 */
977#define ACPI_FULL_PATHNAME 0
978#define ACPI_SINGLE_NAME 1
979#define ACPI_FULL_PATHNAME_NO_TRAILING 2
980#define ACPI_NAME_TYPE_MAX 2
981
982/*
983 * Predefined Namespace items
984 */
985struct acpi_predefined_names {
986 const char *name;
987 u8 type;
988 char *val;
989};
990
991/*
992 * Structure and flags for acpi_get_system_info
993 */
994#define ACPI_SYS_MODE_UNKNOWN 0x0000
995#define ACPI_SYS_MODE_ACPI 0x0001
996#define ACPI_SYS_MODE_LEGACY 0x0002
997#define ACPI_SYS_MODES_MASK 0x0003
998
999/*
1000 * System info returned by acpi_get_system_info()
1001 */
1002struct acpi_system_info {
1003 u32 acpi_ca_version;
1004 u32 flags;
1005 u32 timer_resolution;
1006 u32 reserved1;
1007 u32 reserved2;
1008 u32 debug_level;
1009 u32 debug_layer;
1010};
1011
1012/*
1013 * System statistics returned by acpi_get_statistics()
1014 */
1015struct acpi_statistics {
1016 u32 sci_count;
1017 u32 gpe_count;
1018 u32 fixed_event_count[ACPI_NUM_FIXED_EVENTS];
1019 u32 method_count;
1020};
1021
1022/*
1023 * Types specific to the OS service interfaces
1024 */
1025typedef u32
1026 (ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context);
1027
1028typedef void
1029 (ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context);
1030
1031/*
1032 * Various handlers and callback procedures
1033 */
1034typedef
1035u32 (*acpi_sci_handler) (void *context);
1036
1037typedef
1038void (*acpi_gbl_event_handler) (u32 event_type,
1039 acpi_handle device,
1040 u32 event_number, void *context);
1041
1042#define ACPI_EVENT_TYPE_GPE 0
1043#define ACPI_EVENT_TYPE_FIXED 1
1044
1045typedef
1046u32(*acpi_event_handler) (void *context);
1047
1048typedef
1049u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context);
1050
1051typedef
1052void (*acpi_notify_handler) (acpi_handle device, u32 value, void *context);
1053
1054typedef
1055void (*acpi_object_handler) (acpi_handle object, void *data);
1056
1057typedef
1058acpi_status (*acpi_init_handler) (acpi_handle object, u32 function);
1059
1060#define ACPI_INIT_DEVICE_INI 1
1061
1062typedef
1063acpi_status (*acpi_exception_handler) (acpi_status aml_status,
1064 acpi_name name,
1065 u16 opcode,
1066 u32 aml_offset, void *context);
1067
1068/* Table Event handler (Load, load_table, etc.) and types */
1069
1070typedef
1071acpi_status (*acpi_table_handler) (u32 event, void *table, void *context);
1072
1073/* Table Event Types */
1074
1075#define ACPI_TABLE_EVENT_LOAD 0x0
1076#define ACPI_TABLE_EVENT_UNLOAD 0x1
1077#define ACPI_TABLE_EVENT_INSTALL 0x2
1078#define ACPI_TABLE_EVENT_UNINSTALL 0x3
1079#define ACPI_NUM_TABLE_EVENTS 4
1080
1081/* Address Spaces (For Operation Regions) */
1082
1083typedef
1084acpi_status (*acpi_adr_space_handler) (u32 function,
1085 acpi_physical_address address,
1086 u32 bit_width,
1087 u64 *value,
1088 void *handler_context,
1089 void *region_context);
1090
1091#define ACPI_DEFAULT_HANDLER NULL
1092
1093/* Special Context data for generic_serial_bus/general_purpose_io (ACPI 5.0) */
1094
1095struct acpi_connection_info {
1096 u8 *connection;
1097 u16 length;
1098 u8 access_length;
1099};
1100
1101typedef
1102acpi_status (*acpi_adr_space_setup) (acpi_handle region_handle,
1103 u32 function,
1104 void *handler_context,
1105 void **region_context);
1106
1107#define ACPI_REGION_ACTIVATE 0
1108#define ACPI_REGION_DEACTIVATE 1
1109
1110typedef
1111acpi_status (*acpi_walk_callback) (acpi_handle object,
1112 u32 nesting_level,
1113 void *context, void **return_value);
1114
1115typedef
1116u32 (*acpi_interface_handler) (acpi_string interface_name, u32 supported);
1117
1118/* Interrupt handler return values */
1119
1120#define ACPI_INTERRUPT_NOT_HANDLED 0x00
1121#define ACPI_INTERRUPT_HANDLED 0x01
1122
1123/* GPE handler return values */
1124
1125#define ACPI_REENABLE_GPE 0x80
1126
1127/* Length of 32-bit EISAID values when converted back to a string */
1128
1129#define ACPI_EISAID_STRING_SIZE 8 /* Includes null terminator */
1130
1131/* Length of UUID (string) values */
1132
1133#define ACPI_UUID_LENGTH 16
1134
1135/* Length of 3-byte PCI class code values when converted back to a string */
1136
1137#define ACPI_PCICLS_STRING_SIZE 7 /* Includes null terminator */
1138
1139/* Structures used for device/processor HID, UID, CID */
1140
1141struct acpi_pnp_device_id {
1142 u32 length; /* Length of string + null */
1143 char *string;
1144};
1145
1146struct acpi_pnp_device_id_list {
1147 u32 count; /* Number of IDs in Ids array */
1148 u32 list_size; /* Size of list, including ID strings */
1149 struct acpi_pnp_device_id ids[]; /* ID array */
1150};
1151
1152/*
1153 * Structure returned from acpi_get_object_info.
1154 * Optimized for both 32-bit and 64-bit builds.
1155 */
1156struct acpi_device_info {
1157 u32 info_size; /* Size of info, including ID strings */
1158 u32 name; /* ACPI object Name */
1159 acpi_object_type type; /* ACPI object Type */
1160 u8 param_count; /* If a method, required parameter count */
1161 u16 valid; /* Indicates which optional fields are valid */
1162 u8 flags; /* Miscellaneous info */
1163 u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */
1164 u8 lowest_dstates[5]; /* _sx_w values: 0xFF indicates not valid */
1165 u64 address; /* _ADR value */
1166 struct acpi_pnp_device_id hardware_id; /* _HID value */
1167 struct acpi_pnp_device_id unique_id; /* _UID value */
1168 struct acpi_pnp_device_id class_code; /* _CLS value */
1169 struct acpi_pnp_device_id_list compatible_id_list; /* _CID list <must be last> */
1170};
1171
1172/* Values for Flags field above (acpi_get_object_info) */
1173
1174#define ACPI_PCI_ROOT_BRIDGE 0x01
1175
1176/* Flags for Valid field above (acpi_get_object_info) */
1177
1178#define ACPI_VALID_ADR 0x0002
1179#define ACPI_VALID_HID 0x0004
1180#define ACPI_VALID_UID 0x0008
1181#define ACPI_VALID_CID 0x0020
1182#define ACPI_VALID_CLS 0x0040
1183#define ACPI_VALID_SXDS 0x0100
1184#define ACPI_VALID_SXWS 0x0200
1185
1186/* Flags for _STA method */
1187
1188#define ACPI_STA_DEVICE_PRESENT 0x01
1189#define ACPI_STA_DEVICE_ENABLED 0x02
1190#define ACPI_STA_DEVICE_UI 0x04
1191#define ACPI_STA_DEVICE_FUNCTIONING 0x08
1192#define ACPI_STA_DEVICE_OK 0x08 /* Synonym */
1193#define ACPI_STA_BATTERY_PRESENT 0x10
1194
1195/* Context structs for address space handlers */
1196
1197struct acpi_pci_id {
1198 u16 segment;
1199 u16 bus;
1200 u16 device;
1201 u16 function;
1202};
1203
1204struct acpi_mem_mapping {
1205 acpi_physical_address physical_address;
1206 u8 *logical_address;
1207 acpi_size length;
1208 struct acpi_mem_mapping *next_mm;
1209};
1210
1211struct acpi_mem_space_context {
1212 u32 length;
1213 acpi_physical_address address;
1214 struct acpi_mem_mapping *cur_mm;
1215 struct acpi_mem_mapping *first_mm;
1216};
1217
1218/*
1219 * struct acpi_memory_list is used only if the ACPICA local cache is enabled
1220 */
1221struct acpi_memory_list {
1222 const char *list_name;
1223 void *list_head;
1224 u16 object_size;
1225 u16 max_depth;
1226 u16 current_depth;
1227
1228#ifdef ACPI_DBG_TRACK_ALLOCATIONS
1229
1230 /* Statistics for debug memory tracking only */
1231
1232 u32 total_allocated;
1233 u32 total_freed;
1234 u32 max_occupied;
1235 u32 total_size;
1236 u32 current_total_size;
1237 u32 requests;
1238 u32 hits;
1239#endif
1240};
1241
1242/* Definitions of trace event types */
1243
1244typedef enum {
1245 ACPI_TRACE_AML_METHOD,
1246 ACPI_TRACE_AML_OPCODE,
1247 ACPI_TRACE_AML_REGION
1248} acpi_trace_event_type;
1249
1250/* Definitions of _OSI support */
1251
1252#define ACPI_VENDOR_STRINGS 0x01
1253#define ACPI_FEATURE_STRINGS 0x02
1254#define ACPI_ENABLE_INTERFACES 0x00
1255#define ACPI_DISABLE_INTERFACES 0x04
1256
1257#define ACPI_DISABLE_ALL_VENDOR_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS)
1258#define ACPI_DISABLE_ALL_FEATURE_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_FEATURE_STRINGS)
1259#define ACPI_DISABLE_ALL_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS)
1260#define ACPI_ENABLE_ALL_VENDOR_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS)
1261#define ACPI_ENABLE_ALL_FEATURE_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_FEATURE_STRINGS)
1262#define ACPI_ENABLE_ALL_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS)
1263
1264#define ACPI_OSI_WIN_2000 0x01
1265#define ACPI_OSI_WIN_XP 0x02
1266#define ACPI_OSI_WIN_XP_SP1 0x03
1267#define ACPI_OSI_WINSRV_2003 0x04
1268#define ACPI_OSI_WIN_XP_SP2 0x05
1269#define ACPI_OSI_WINSRV_2003_SP1 0x06
1270#define ACPI_OSI_WIN_VISTA 0x07
1271#define ACPI_OSI_WINSRV_2008 0x08
1272#define ACPI_OSI_WIN_VISTA_SP1 0x09
1273#define ACPI_OSI_WIN_VISTA_SP2 0x0A
1274#define ACPI_OSI_WIN_7 0x0B
1275#define ACPI_OSI_WIN_8 0x0C
1276#define ACPI_OSI_WIN_8_1 0x0D
1277#define ACPI_OSI_WIN_10 0x0E
1278#define ACPI_OSI_WIN_10_RS1 0x0F
1279#define ACPI_OSI_WIN_10_RS2 0x10
1280#define ACPI_OSI_WIN_10_RS3 0x11
1281#define ACPI_OSI_WIN_10_RS4 0x12
1282#define ACPI_OSI_WIN_10_RS5 0x13
1283#define ACPI_OSI_WIN_10_19H1 0x14
1284
1285/* Definitions of getopt */
1286
1287#define ACPI_OPT_END -1
1288
1289/* Definitions for explicit fallthrough */
1290
1291#ifndef ACPI_FALLTHROUGH
1292#define ACPI_FALLTHROUGH do {} while(0)
1293#endif
1294
1295#endif /* __ACTYPES_H__ */