Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * processor_idle - idle state submodule to the ACPI processor driver
4 *
5 * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
6 * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
7 * Copyright (C) 2004, 2005 Dominik Brodowski <linux@brodo.de>
8 * Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
9 * - Added processor hotplug support
10 * Copyright (C) 2005 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
11 * - Added support for C3 on SMP
12 */
13#define pr_fmt(fmt) "ACPI: " fmt
14
15#include <linux/module.h>
16#include <linux/acpi.h>
17#include <linux/dmi.h>
18#include <linux/sched.h> /* need_resched() */
19#include <linux/tick.h>
20#include <linux/cpuidle.h>
21#include <linux/cpu.h>
22#include <acpi/processor.h>
23
24/*
25 * Include the apic definitions for x86 to have the APIC timer related defines
26 * available also for UP (on SMP it gets magically included via linux/smp.h).
27 * asm/acpi.h is not an option, as it would require more include magic. Also
28 * creating an empty asm-ia64/apic.h would just trade pest vs. cholera.
29 */
30#ifdef CONFIG_X86
31#include <asm/apic.h>
32#endif
33
34#define ACPI_PROCESSOR_CLASS "processor"
35#define _COMPONENT ACPI_PROCESSOR_COMPONENT
36ACPI_MODULE_NAME("processor_idle");
37
38#define ACPI_IDLE_STATE_START (IS_ENABLED(CONFIG_ARCH_HAS_CPU_RELAX) ? 1 : 0)
39
40static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
41module_param(max_cstate, uint, 0000);
42static unsigned int nocst __read_mostly;
43module_param(nocst, uint, 0000);
44static int bm_check_disable __read_mostly;
45module_param(bm_check_disable, uint, 0000);
46
47static unsigned int latency_factor __read_mostly = 2;
48module_param(latency_factor, uint, 0644);
49
50static DEFINE_PER_CPU(struct cpuidle_device *, acpi_cpuidle_device);
51
52struct cpuidle_driver acpi_idle_driver = {
53 .name = "acpi_idle",
54 .owner = THIS_MODULE,
55};
56
57#ifdef CONFIG_ACPI_PROCESSOR_CSTATE
58static
59DEFINE_PER_CPU(struct acpi_processor_cx * [CPUIDLE_STATE_MAX], acpi_cstate);
60
61static int disabled_by_idle_boot_param(void)
62{
63 return boot_option_idle_override == IDLE_POLL ||
64 boot_option_idle_override == IDLE_HALT;
65}
66
67/*
68 * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
69 * For now disable this. Probably a bug somewhere else.
70 *
71 * To skip this limit, boot/load with a large max_cstate limit.
72 */
73static int set_max_cstate(const struct dmi_system_id *id)
74{
75 if (max_cstate > ACPI_PROCESSOR_MAX_POWER)
76 return 0;
77
78 pr_notice("%s detected - limiting to C%ld max_cstate."
79 " Override with \"processor.max_cstate=%d\"\n", id->ident,
80 (long)id->driver_data, ACPI_PROCESSOR_MAX_POWER + 1);
81
82 max_cstate = (long)id->driver_data;
83
84 return 0;
85}
86
87static const struct dmi_system_id processor_power_dmi_table[] = {
88 { set_max_cstate, "Clevo 5600D", {
89 DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
90 DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")},
91 (void *)2},
92 { set_max_cstate, "Pavilion zv5000", {
93 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
94 DMI_MATCH(DMI_PRODUCT_NAME,"Pavilion zv5000 (DS502A#ABA)")},
95 (void *)1},
96 { set_max_cstate, "Asus L8400B", {
97 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
98 DMI_MATCH(DMI_PRODUCT_NAME,"L8400B series Notebook PC")},
99 (void *)1},
100 {},
101};
102
103
104/*
105 * Callers should disable interrupts before the call and enable
106 * interrupts after return.
107 */
108static void __cpuidle acpi_safe_halt(void)
109{
110 if (!tif_need_resched()) {
111 safe_halt();
112 local_irq_disable();
113 }
114}
115
116#ifdef ARCH_APICTIMER_STOPS_ON_C3
117
118/*
119 * Some BIOS implementations switch to C3 in the published C2 state.
120 * This seems to be a common problem on AMD boxen, but other vendors
121 * are affected too. We pick the most conservative approach: we assume
122 * that the local APIC stops in both C2 and C3.
123 */
124static void lapic_timer_check_state(int state, struct acpi_processor *pr,
125 struct acpi_processor_cx *cx)
126{
127 struct acpi_processor_power *pwr = &pr->power;
128 u8 type = local_apic_timer_c2_ok ? ACPI_STATE_C3 : ACPI_STATE_C2;
129
130 if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
131 return;
132
133 if (boot_cpu_has_bug(X86_BUG_AMD_APIC_C1E))
134 type = ACPI_STATE_C1;
135
136 /*
137 * Check, if one of the previous states already marked the lapic
138 * unstable
139 */
140 if (pwr->timer_broadcast_on_state < state)
141 return;
142
143 if (cx->type >= type)
144 pr->power.timer_broadcast_on_state = state;
145}
146
147static void __lapic_timer_propagate_broadcast(void *arg)
148{
149 struct acpi_processor *pr = (struct acpi_processor *) arg;
150
151 if (pr->power.timer_broadcast_on_state < INT_MAX)
152 tick_broadcast_enable();
153 else
154 tick_broadcast_disable();
155}
156
157static void lapic_timer_propagate_broadcast(struct acpi_processor *pr)
158{
159 smp_call_function_single(pr->id, __lapic_timer_propagate_broadcast,
160 (void *)pr, 1);
161}
162
163/* Power(C) State timer broadcast control */
164static void lapic_timer_state_broadcast(struct acpi_processor *pr,
165 struct acpi_processor_cx *cx,
166 int broadcast)
167{
168 int state = cx - pr->power.states;
169
170 if (state >= pr->power.timer_broadcast_on_state) {
171 if (broadcast)
172 tick_broadcast_enter();
173 else
174 tick_broadcast_exit();
175 }
176}
177
178#else
179
180static void lapic_timer_check_state(int state, struct acpi_processor *pr,
181 struct acpi_processor_cx *cstate) { }
182static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) { }
183static void lapic_timer_state_broadcast(struct acpi_processor *pr,
184 struct acpi_processor_cx *cx,
185 int broadcast)
186{
187}
188
189#endif
190
191#if defined(CONFIG_X86)
192static void tsc_check_state(int state)
193{
194 switch (boot_cpu_data.x86_vendor) {
195 case X86_VENDOR_HYGON:
196 case X86_VENDOR_AMD:
197 case X86_VENDOR_INTEL:
198 case X86_VENDOR_CENTAUR:
199 case X86_VENDOR_ZHAOXIN:
200 /*
201 * AMD Fam10h TSC will tick in all
202 * C/P/S0/S1 states when this bit is set.
203 */
204 if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
205 return;
206
207 /*FALL THROUGH*/
208 default:
209 /* TSC could halt in idle, so notify users */
210 if (state > ACPI_STATE_C1)
211 mark_tsc_unstable("TSC halts in idle");
212 }
213}
214#else
215static void tsc_check_state(int state) { return; }
216#endif
217
218static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
219{
220
221 if (!pr->pblk)
222 return -ENODEV;
223
224 /* if info is obtained from pblk/fadt, type equals state */
225 pr->power.states[ACPI_STATE_C2].type = ACPI_STATE_C2;
226 pr->power.states[ACPI_STATE_C3].type = ACPI_STATE_C3;
227
228#ifndef CONFIG_HOTPLUG_CPU
229 /*
230 * Check for P_LVL2_UP flag before entering C2 and above on
231 * an SMP system.
232 */
233 if ((num_online_cpus() > 1) &&
234 !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
235 return -ENODEV;
236#endif
237
238 /* determine C2 and C3 address from pblk */
239 pr->power.states[ACPI_STATE_C2].address = pr->pblk + 4;
240 pr->power.states[ACPI_STATE_C3].address = pr->pblk + 5;
241
242 /* determine latencies from FADT */
243 pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.c2_latency;
244 pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.c3_latency;
245
246 /*
247 * FADT specified C2 latency must be less than or equal to
248 * 100 microseconds.
249 */
250 if (acpi_gbl_FADT.c2_latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
251 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
252 "C2 latency too large [%d]\n", acpi_gbl_FADT.c2_latency));
253 /* invalidate C2 */
254 pr->power.states[ACPI_STATE_C2].address = 0;
255 }
256
257 /*
258 * FADT supplied C3 latency must be less than or equal to
259 * 1000 microseconds.
260 */
261 if (acpi_gbl_FADT.c3_latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
262 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
263 "C3 latency too large [%d]\n", acpi_gbl_FADT.c3_latency));
264 /* invalidate C3 */
265 pr->power.states[ACPI_STATE_C3].address = 0;
266 }
267
268 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
269 "lvl2[0x%08x] lvl3[0x%08x]\n",
270 pr->power.states[ACPI_STATE_C2].address,
271 pr->power.states[ACPI_STATE_C3].address));
272
273 snprintf(pr->power.states[ACPI_STATE_C2].desc,
274 ACPI_CX_DESC_LEN, "ACPI P_LVL2 IOPORT 0x%x",
275 pr->power.states[ACPI_STATE_C2].address);
276 snprintf(pr->power.states[ACPI_STATE_C3].desc,
277 ACPI_CX_DESC_LEN, "ACPI P_LVL3 IOPORT 0x%x",
278 pr->power.states[ACPI_STATE_C3].address);
279
280 return 0;
281}
282
283static int acpi_processor_get_power_info_default(struct acpi_processor *pr)
284{
285 if (!pr->power.states[ACPI_STATE_C1].valid) {
286 /* set the first C-State to C1 */
287 /* all processors need to support C1 */
288 pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
289 pr->power.states[ACPI_STATE_C1].valid = 1;
290 pr->power.states[ACPI_STATE_C1].entry_method = ACPI_CSTATE_HALT;
291
292 snprintf(pr->power.states[ACPI_STATE_C1].desc,
293 ACPI_CX_DESC_LEN, "ACPI HLT");
294 }
295 /* the C0 state only exists as a filler in our array */
296 pr->power.states[ACPI_STATE_C0].valid = 1;
297 return 0;
298}
299
300static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
301{
302 acpi_status status;
303 u64 count;
304 int current_count;
305 int i, ret = 0;
306 struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
307 union acpi_object *cst;
308
309 if (nocst)
310 return -ENODEV;
311
312 current_count = 0;
313
314 status = acpi_evaluate_object(pr->handle, "_CST", NULL, &buffer);
315 if (ACPI_FAILURE(status)) {
316 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No _CST, giving up\n"));
317 return -ENODEV;
318 }
319
320 cst = buffer.pointer;
321
322 /* There must be at least 2 elements */
323 if (!cst || (cst->type != ACPI_TYPE_PACKAGE) || cst->package.count < 2) {
324 pr_err("not enough elements in _CST\n");
325 ret = -EFAULT;
326 goto end;
327 }
328
329 count = cst->package.elements[0].integer.value;
330
331 /* Validate number of power states. */
332 if (count < 1 || count != cst->package.count - 1) {
333 pr_err("count given by _CST is not valid\n");
334 ret = -EFAULT;
335 goto end;
336 }
337
338 /* Tell driver that at least _CST is supported. */
339 pr->flags.has_cst = 1;
340
341 for (i = 1; i <= count; i++) {
342 union acpi_object *element;
343 union acpi_object *obj;
344 struct acpi_power_register *reg;
345 struct acpi_processor_cx cx;
346
347 memset(&cx, 0, sizeof(cx));
348
349 element = &(cst->package.elements[i]);
350 if (element->type != ACPI_TYPE_PACKAGE)
351 continue;
352
353 if (element->package.count != 4)
354 continue;
355
356 obj = &(element->package.elements[0]);
357
358 if (obj->type != ACPI_TYPE_BUFFER)
359 continue;
360
361 reg = (struct acpi_power_register *)obj->buffer.pointer;
362
363 if (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO &&
364 (reg->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE))
365 continue;
366
367 /* There should be an easy way to extract an integer... */
368 obj = &(element->package.elements[1]);
369 if (obj->type != ACPI_TYPE_INTEGER)
370 continue;
371
372 cx.type = obj->integer.value;
373 /*
374 * Some buggy BIOSes won't list C1 in _CST -
375 * Let acpi_processor_get_power_info_default() handle them later
376 */
377 if (i == 1 && cx.type != ACPI_STATE_C1)
378 current_count++;
379
380 cx.address = reg->address;
381 cx.index = current_count + 1;
382
383 cx.entry_method = ACPI_CSTATE_SYSTEMIO;
384 if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) {
385 if (acpi_processor_ffh_cstate_probe
386 (pr->id, &cx, reg) == 0) {
387 cx.entry_method = ACPI_CSTATE_FFH;
388 } else if (cx.type == ACPI_STATE_C1) {
389 /*
390 * C1 is a special case where FIXED_HARDWARE
391 * can be handled in non-MWAIT way as well.
392 * In that case, save this _CST entry info.
393 * Otherwise, ignore this info and continue.
394 */
395 cx.entry_method = ACPI_CSTATE_HALT;
396 snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI HLT");
397 } else {
398 continue;
399 }
400 if (cx.type == ACPI_STATE_C1 &&
401 (boot_option_idle_override == IDLE_NOMWAIT)) {
402 /*
403 * In most cases the C1 space_id obtained from
404 * _CST object is FIXED_HARDWARE access mode.
405 * But when the option of idle=halt is added,
406 * the entry_method type should be changed from
407 * CSTATE_FFH to CSTATE_HALT.
408 * When the option of idle=nomwait is added,
409 * the C1 entry_method type should be
410 * CSTATE_HALT.
411 */
412 cx.entry_method = ACPI_CSTATE_HALT;
413 snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI HLT");
414 }
415 } else {
416 snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI IOPORT 0x%x",
417 cx.address);
418 }
419
420 if (cx.type == ACPI_STATE_C1) {
421 cx.valid = 1;
422 }
423
424 obj = &(element->package.elements[2]);
425 if (obj->type != ACPI_TYPE_INTEGER)
426 continue;
427
428 cx.latency = obj->integer.value;
429
430 obj = &(element->package.elements[3]);
431 if (obj->type != ACPI_TYPE_INTEGER)
432 continue;
433
434 current_count++;
435 memcpy(&(pr->power.states[current_count]), &cx, sizeof(cx));
436
437 /*
438 * We support total ACPI_PROCESSOR_MAX_POWER - 1
439 * (From 1 through ACPI_PROCESSOR_MAX_POWER - 1)
440 */
441 if (current_count >= (ACPI_PROCESSOR_MAX_POWER - 1)) {
442 pr_warn("Limiting number of power states to max (%d)\n",
443 ACPI_PROCESSOR_MAX_POWER);
444 pr_warn("Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n");
445 break;
446 }
447 }
448
449 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d power states\n",
450 current_count));
451
452 /* Validate number of power states discovered */
453 if (current_count < 2)
454 ret = -EFAULT;
455
456 end:
457 kfree(buffer.pointer);
458
459 return ret;
460}
461
462static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
463 struct acpi_processor_cx *cx)
464{
465 static int bm_check_flag = -1;
466 static int bm_control_flag = -1;
467
468
469 if (!cx->address)
470 return;
471
472 /*
473 * PIIX4 Erratum #18: We don't support C3 when Type-F (fast)
474 * DMA transfers are used by any ISA device to avoid livelock.
475 * Note that we could disable Type-F DMA (as recommended by
476 * the erratum), but this is known to disrupt certain ISA
477 * devices thus we take the conservative approach.
478 */
479 else if (errata.piix4.fdma) {
480 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
481 "C3 not supported on PIIX4 with Type-F DMA\n"));
482 return;
483 }
484
485 /* All the logic here assumes flags.bm_check is same across all CPUs */
486 if (bm_check_flag == -1) {
487 /* Determine whether bm_check is needed based on CPU */
488 acpi_processor_power_init_bm_check(&(pr->flags), pr->id);
489 bm_check_flag = pr->flags.bm_check;
490 bm_control_flag = pr->flags.bm_control;
491 } else {
492 pr->flags.bm_check = bm_check_flag;
493 pr->flags.bm_control = bm_control_flag;
494 }
495
496 if (pr->flags.bm_check) {
497 if (!pr->flags.bm_control) {
498 if (pr->flags.has_cst != 1) {
499 /* bus mastering control is necessary */
500 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
501 "C3 support requires BM control\n"));
502 return;
503 } else {
504 /* Here we enter C3 without bus mastering */
505 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
506 "C3 support without BM control\n"));
507 }
508 }
509 } else {
510 /*
511 * WBINVD should be set in fadt, for C3 state to be
512 * supported on when bm_check is not required.
513 */
514 if (!(acpi_gbl_FADT.flags & ACPI_FADT_WBINVD)) {
515 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
516 "Cache invalidation should work properly"
517 " for C3 to be enabled on SMP systems\n"));
518 return;
519 }
520 }
521
522 /*
523 * Otherwise we've met all of our C3 requirements.
524 * Normalize the C3 latency to expidite policy. Enable
525 * checking of bus mastering status (bm_check) so we can
526 * use this in our C3 policy
527 */
528 cx->valid = 1;
529
530 /*
531 * On older chipsets, BM_RLD needs to be set
532 * in order for Bus Master activity to wake the
533 * system from C3. Newer chipsets handle DMA
534 * during C3 automatically and BM_RLD is a NOP.
535 * In either case, the proper way to
536 * handle BM_RLD is to set it and leave it set.
537 */
538 acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 1);
539
540 return;
541}
542
543static int acpi_processor_power_verify(struct acpi_processor *pr)
544{
545 unsigned int i;
546 unsigned int working = 0;
547
548 pr->power.timer_broadcast_on_state = INT_MAX;
549
550 for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
551 struct acpi_processor_cx *cx = &pr->power.states[i];
552
553 switch (cx->type) {
554 case ACPI_STATE_C1:
555 cx->valid = 1;
556 break;
557
558 case ACPI_STATE_C2:
559 if (!cx->address)
560 break;
561 cx->valid = 1;
562 break;
563
564 case ACPI_STATE_C3:
565 acpi_processor_power_verify_c3(pr, cx);
566 break;
567 }
568 if (!cx->valid)
569 continue;
570
571 lapic_timer_check_state(i, pr, cx);
572 tsc_check_state(cx->type);
573 working++;
574 }
575
576 lapic_timer_propagate_broadcast(pr);
577
578 return (working);
579}
580
581static int acpi_processor_get_cstate_info(struct acpi_processor *pr)
582{
583 unsigned int i;
584 int result;
585
586
587 /* NOTE: the idle thread may not be running while calling
588 * this function */
589
590 /* Zero initialize all the C-states info. */
591 memset(pr->power.states, 0, sizeof(pr->power.states));
592
593 result = acpi_processor_get_power_info_cst(pr);
594 if (result == -ENODEV)
595 result = acpi_processor_get_power_info_fadt(pr);
596
597 if (result)
598 return result;
599
600 acpi_processor_get_power_info_default(pr);
601
602 pr->power.count = acpi_processor_power_verify(pr);
603
604 /*
605 * if one state of type C2 or C3 is available, mark this
606 * CPU as being "idle manageable"
607 */
608 for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
609 if (pr->power.states[i].valid) {
610 pr->power.count = i;
611 if (pr->power.states[i].type >= ACPI_STATE_C2)
612 pr->flags.power = 1;
613 }
614 }
615
616 return 0;
617}
618
619/**
620 * acpi_idle_bm_check - checks if bus master activity was detected
621 */
622static int acpi_idle_bm_check(void)
623{
624 u32 bm_status = 0;
625
626 if (bm_check_disable)
627 return 0;
628
629 acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
630 if (bm_status)
631 acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
632 /*
633 * PIIX4 Erratum #18: Note that BM_STS doesn't always reflect
634 * the true state of bus mastering activity; forcing us to
635 * manually check the BMIDEA bit of each IDE channel.
636 */
637 else if (errata.piix4.bmisx) {
638 if ((inb_p(errata.piix4.bmisx + 0x02) & 0x01)
639 || (inb_p(errata.piix4.bmisx + 0x0A) & 0x01))
640 bm_status = 1;
641 }
642 return bm_status;
643}
644
645/**
646 * acpi_idle_do_entry - enter idle state using the appropriate method
647 * @cx: cstate data
648 *
649 * Caller disables interrupt before call and enables interrupt after return.
650 */
651static void __cpuidle acpi_idle_do_entry(struct acpi_processor_cx *cx)
652{
653 if (cx->entry_method == ACPI_CSTATE_FFH) {
654 /* Call into architectural FFH based C-state */
655 acpi_processor_ffh_cstate_enter(cx);
656 } else if (cx->entry_method == ACPI_CSTATE_HALT) {
657 acpi_safe_halt();
658 } else {
659 /* IO port based C-state */
660 inb(cx->address);
661 /* Dummy wait op - must do something useless after P_LVL2 read
662 because chipsets cannot guarantee that STPCLK# signal
663 gets asserted in time to freeze execution properly. */
664 inl(acpi_gbl_FADT.xpm_timer_block.address);
665 }
666}
667
668/**
669 * acpi_idle_play_dead - enters an ACPI state for long-term idle (i.e. off-lining)
670 * @dev: the target CPU
671 * @index: the index of suggested state
672 */
673static int acpi_idle_play_dead(struct cpuidle_device *dev, int index)
674{
675 struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
676
677 ACPI_FLUSH_CPU_CACHE();
678
679 while (1) {
680
681 if (cx->entry_method == ACPI_CSTATE_HALT)
682 safe_halt();
683 else if (cx->entry_method == ACPI_CSTATE_SYSTEMIO) {
684 inb(cx->address);
685 /* See comment in acpi_idle_do_entry() */
686 inl(acpi_gbl_FADT.xpm_timer_block.address);
687 } else
688 return -ENODEV;
689 }
690
691 /* Never reached */
692 return 0;
693}
694
695static bool acpi_idle_fallback_to_c1(struct acpi_processor *pr)
696{
697 return IS_ENABLED(CONFIG_HOTPLUG_CPU) && !pr->flags.has_cst &&
698 !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED);
699}
700
701static int c3_cpu_count;
702static DEFINE_RAW_SPINLOCK(c3_lock);
703
704/**
705 * acpi_idle_enter_bm - enters C3 with proper BM handling
706 * @pr: Target processor
707 * @cx: Target state context
708 * @timer_bc: Whether or not to change timer mode to broadcast
709 */
710static void acpi_idle_enter_bm(struct acpi_processor *pr,
711 struct acpi_processor_cx *cx, bool timer_bc)
712{
713 acpi_unlazy_tlb(smp_processor_id());
714
715 /*
716 * Must be done before busmaster disable as we might need to
717 * access HPET !
718 */
719 if (timer_bc)
720 lapic_timer_state_broadcast(pr, cx, 1);
721
722 /*
723 * disable bus master
724 * bm_check implies we need ARB_DIS
725 * bm_control implies whether we can do ARB_DIS
726 *
727 * That leaves a case where bm_check is set and bm_control is
728 * not set. In that case we cannot do much, we enter C3
729 * without doing anything.
730 */
731 if (pr->flags.bm_control) {
732 raw_spin_lock(&c3_lock);
733 c3_cpu_count++;
734 /* Disable bus master arbitration when all CPUs are in C3 */
735 if (c3_cpu_count == num_online_cpus())
736 acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
737 raw_spin_unlock(&c3_lock);
738 }
739
740 acpi_idle_do_entry(cx);
741
742 /* Re-enable bus master arbitration */
743 if (pr->flags.bm_control) {
744 raw_spin_lock(&c3_lock);
745 acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
746 c3_cpu_count--;
747 raw_spin_unlock(&c3_lock);
748 }
749
750 if (timer_bc)
751 lapic_timer_state_broadcast(pr, cx, 0);
752}
753
754static int acpi_idle_enter(struct cpuidle_device *dev,
755 struct cpuidle_driver *drv, int index)
756{
757 struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
758 struct acpi_processor *pr;
759
760 pr = __this_cpu_read(processors);
761 if (unlikely(!pr))
762 return -EINVAL;
763
764 if (cx->type != ACPI_STATE_C1) {
765 if (acpi_idle_fallback_to_c1(pr) && num_online_cpus() > 1) {
766 index = ACPI_IDLE_STATE_START;
767 cx = per_cpu(acpi_cstate[index], dev->cpu);
768 } else if (cx->type == ACPI_STATE_C3 && pr->flags.bm_check) {
769 if (cx->bm_sts_skip || !acpi_idle_bm_check()) {
770 acpi_idle_enter_bm(pr, cx, true);
771 return index;
772 } else if (drv->safe_state_index >= 0) {
773 index = drv->safe_state_index;
774 cx = per_cpu(acpi_cstate[index], dev->cpu);
775 } else {
776 acpi_safe_halt();
777 return -EBUSY;
778 }
779 }
780 }
781
782 lapic_timer_state_broadcast(pr, cx, 1);
783
784 if (cx->type == ACPI_STATE_C3)
785 ACPI_FLUSH_CPU_CACHE();
786
787 acpi_idle_do_entry(cx);
788
789 lapic_timer_state_broadcast(pr, cx, 0);
790
791 return index;
792}
793
794static void acpi_idle_enter_s2idle(struct cpuidle_device *dev,
795 struct cpuidle_driver *drv, int index)
796{
797 struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
798
799 if (cx->type == ACPI_STATE_C3) {
800 struct acpi_processor *pr = __this_cpu_read(processors);
801
802 if (unlikely(!pr))
803 return;
804
805 if (pr->flags.bm_check) {
806 acpi_idle_enter_bm(pr, cx, false);
807 return;
808 } else {
809 ACPI_FLUSH_CPU_CACHE();
810 }
811 }
812 acpi_idle_do_entry(cx);
813}
814
815static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr,
816 struct cpuidle_device *dev)
817{
818 int i, count = ACPI_IDLE_STATE_START;
819 struct acpi_processor_cx *cx;
820
821 if (max_cstate == 0)
822 max_cstate = 1;
823
824 for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
825 cx = &pr->power.states[i];
826
827 if (!cx->valid)
828 continue;
829
830 per_cpu(acpi_cstate[count], dev->cpu) = cx;
831
832 count++;
833 if (count == CPUIDLE_STATE_MAX)
834 break;
835 }
836
837 if (!count)
838 return -EINVAL;
839
840 return 0;
841}
842
843static int acpi_processor_setup_cstates(struct acpi_processor *pr)
844{
845 int i, count;
846 struct acpi_processor_cx *cx;
847 struct cpuidle_state *state;
848 struct cpuidle_driver *drv = &acpi_idle_driver;
849
850 if (max_cstate == 0)
851 max_cstate = 1;
852
853 if (IS_ENABLED(CONFIG_ARCH_HAS_CPU_RELAX)) {
854 cpuidle_poll_state_init(drv);
855 count = 1;
856 } else {
857 count = 0;
858 }
859
860 for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
861 cx = &pr->power.states[i];
862
863 if (!cx->valid)
864 continue;
865
866 state = &drv->states[count];
867 snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i);
868 strlcpy(state->desc, cx->desc, CPUIDLE_DESC_LEN);
869 state->exit_latency = cx->latency;
870 state->target_residency = cx->latency * latency_factor;
871 state->enter = acpi_idle_enter;
872
873 state->flags = 0;
874 if (cx->type == ACPI_STATE_C1 || cx->type == ACPI_STATE_C2) {
875 state->enter_dead = acpi_idle_play_dead;
876 drv->safe_state_index = count;
877 }
878 /*
879 * Halt-induced C1 is not good for ->enter_s2idle, because it
880 * re-enables interrupts on exit. Moreover, C1 is generally not
881 * particularly interesting from the suspend-to-idle angle, so
882 * avoid C1 and the situations in which we may need to fall back
883 * to it altogether.
884 */
885 if (cx->type != ACPI_STATE_C1 && !acpi_idle_fallback_to_c1(pr))
886 state->enter_s2idle = acpi_idle_enter_s2idle;
887
888 count++;
889 if (count == CPUIDLE_STATE_MAX)
890 break;
891 }
892
893 drv->state_count = count;
894
895 if (!count)
896 return -EINVAL;
897
898 return 0;
899}
900
901static inline void acpi_processor_cstate_first_run_checks(void)
902{
903 acpi_status status;
904 static int first_run;
905
906 if (first_run)
907 return;
908 dmi_check_system(processor_power_dmi_table);
909 max_cstate = acpi_processor_cstate_check(max_cstate);
910 if (max_cstate < ACPI_C_STATES_MAX)
911 pr_notice("ACPI: processor limited to max C-state %d\n",
912 max_cstate);
913 first_run++;
914
915 if (acpi_gbl_FADT.cst_control && !nocst) {
916 status = acpi_os_write_port(acpi_gbl_FADT.smi_command,
917 acpi_gbl_FADT.cst_control, 8);
918 if (ACPI_FAILURE(status))
919 ACPI_EXCEPTION((AE_INFO, status,
920 "Notifying BIOS of _CST ability failed"));
921 }
922}
923#else
924
925static inline int disabled_by_idle_boot_param(void) { return 0; }
926static inline void acpi_processor_cstate_first_run_checks(void) { }
927static int acpi_processor_get_cstate_info(struct acpi_processor *pr)
928{
929 return -ENODEV;
930}
931
932static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr,
933 struct cpuidle_device *dev)
934{
935 return -EINVAL;
936}
937
938static int acpi_processor_setup_cstates(struct acpi_processor *pr)
939{
940 return -EINVAL;
941}
942
943#endif /* CONFIG_ACPI_PROCESSOR_CSTATE */
944
945struct acpi_lpi_states_array {
946 unsigned int size;
947 unsigned int composite_states_size;
948 struct acpi_lpi_state *entries;
949 struct acpi_lpi_state *composite_states[ACPI_PROCESSOR_MAX_POWER];
950};
951
952static int obj_get_integer(union acpi_object *obj, u32 *value)
953{
954 if (obj->type != ACPI_TYPE_INTEGER)
955 return -EINVAL;
956
957 *value = obj->integer.value;
958 return 0;
959}
960
961static int acpi_processor_evaluate_lpi(acpi_handle handle,
962 struct acpi_lpi_states_array *info)
963{
964 acpi_status status;
965 int ret = 0;
966 int pkg_count, state_idx = 1, loop;
967 struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
968 union acpi_object *lpi_data;
969 struct acpi_lpi_state *lpi_state;
970
971 status = acpi_evaluate_object(handle, "_LPI", NULL, &buffer);
972 if (ACPI_FAILURE(status)) {
973 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No _LPI, giving up\n"));
974 return -ENODEV;
975 }
976
977 lpi_data = buffer.pointer;
978
979 /* There must be at least 4 elements = 3 elements + 1 package */
980 if (!lpi_data || lpi_data->type != ACPI_TYPE_PACKAGE ||
981 lpi_data->package.count < 4) {
982 pr_debug("not enough elements in _LPI\n");
983 ret = -ENODATA;
984 goto end;
985 }
986
987 pkg_count = lpi_data->package.elements[2].integer.value;
988
989 /* Validate number of power states. */
990 if (pkg_count < 1 || pkg_count != lpi_data->package.count - 3) {
991 pr_debug("count given by _LPI is not valid\n");
992 ret = -ENODATA;
993 goto end;
994 }
995
996 lpi_state = kcalloc(pkg_count, sizeof(*lpi_state), GFP_KERNEL);
997 if (!lpi_state) {
998 ret = -ENOMEM;
999 goto end;
1000 }
1001
1002 info->size = pkg_count;
1003 info->entries = lpi_state;
1004
1005 /* LPI States start at index 3 */
1006 for (loop = 3; state_idx <= pkg_count; loop++, state_idx++, lpi_state++) {
1007 union acpi_object *element, *pkg_elem, *obj;
1008
1009 element = &lpi_data->package.elements[loop];
1010 if (element->type != ACPI_TYPE_PACKAGE || element->package.count < 7)
1011 continue;
1012
1013 pkg_elem = element->package.elements;
1014
1015 obj = pkg_elem + 6;
1016 if (obj->type == ACPI_TYPE_BUFFER) {
1017 struct acpi_power_register *reg;
1018
1019 reg = (struct acpi_power_register *)obj->buffer.pointer;
1020 if (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO &&
1021 reg->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)
1022 continue;
1023
1024 lpi_state->address = reg->address;
1025 lpi_state->entry_method =
1026 reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE ?
1027 ACPI_CSTATE_FFH : ACPI_CSTATE_SYSTEMIO;
1028 } else if (obj->type == ACPI_TYPE_INTEGER) {
1029 lpi_state->entry_method = ACPI_CSTATE_INTEGER;
1030 lpi_state->address = obj->integer.value;
1031 } else {
1032 continue;
1033 }
1034
1035 /* elements[7,8] skipped for now i.e. Residency/Usage counter*/
1036
1037 obj = pkg_elem + 9;
1038 if (obj->type == ACPI_TYPE_STRING)
1039 strlcpy(lpi_state->desc, obj->string.pointer,
1040 ACPI_CX_DESC_LEN);
1041
1042 lpi_state->index = state_idx;
1043 if (obj_get_integer(pkg_elem + 0, &lpi_state->min_residency)) {
1044 pr_debug("No min. residency found, assuming 10 us\n");
1045 lpi_state->min_residency = 10;
1046 }
1047
1048 if (obj_get_integer(pkg_elem + 1, &lpi_state->wake_latency)) {
1049 pr_debug("No wakeup residency found, assuming 10 us\n");
1050 lpi_state->wake_latency = 10;
1051 }
1052
1053 if (obj_get_integer(pkg_elem + 2, &lpi_state->flags))
1054 lpi_state->flags = 0;
1055
1056 if (obj_get_integer(pkg_elem + 3, &lpi_state->arch_flags))
1057 lpi_state->arch_flags = 0;
1058
1059 if (obj_get_integer(pkg_elem + 4, &lpi_state->res_cnt_freq))
1060 lpi_state->res_cnt_freq = 1;
1061
1062 if (obj_get_integer(pkg_elem + 5, &lpi_state->enable_parent_state))
1063 lpi_state->enable_parent_state = 0;
1064 }
1065
1066 acpi_handle_debug(handle, "Found %d power states\n", state_idx);
1067end:
1068 kfree(buffer.pointer);
1069 return ret;
1070}
1071
1072/*
1073 * flat_state_cnt - the number of composite LPI states after the process of flattening
1074 */
1075static int flat_state_cnt;
1076
1077/**
1078 * combine_lpi_states - combine local and parent LPI states to form a composite LPI state
1079 *
1080 * @local: local LPI state
1081 * @parent: parent LPI state
1082 * @result: composite LPI state
1083 */
1084static bool combine_lpi_states(struct acpi_lpi_state *local,
1085 struct acpi_lpi_state *parent,
1086 struct acpi_lpi_state *result)
1087{
1088 if (parent->entry_method == ACPI_CSTATE_INTEGER) {
1089 if (!parent->address) /* 0 means autopromotable */
1090 return false;
1091 result->address = local->address + parent->address;
1092 } else {
1093 result->address = parent->address;
1094 }
1095
1096 result->min_residency = max(local->min_residency, parent->min_residency);
1097 result->wake_latency = local->wake_latency + parent->wake_latency;
1098 result->enable_parent_state = parent->enable_parent_state;
1099 result->entry_method = local->entry_method;
1100
1101 result->flags = parent->flags;
1102 result->arch_flags = parent->arch_flags;
1103 result->index = parent->index;
1104
1105 strlcpy(result->desc, local->desc, ACPI_CX_DESC_LEN);
1106 strlcat(result->desc, "+", ACPI_CX_DESC_LEN);
1107 strlcat(result->desc, parent->desc, ACPI_CX_DESC_LEN);
1108 return true;
1109}
1110
1111#define ACPI_LPI_STATE_FLAGS_ENABLED BIT(0)
1112
1113static void stash_composite_state(struct acpi_lpi_states_array *curr_level,
1114 struct acpi_lpi_state *t)
1115{
1116 curr_level->composite_states[curr_level->composite_states_size++] = t;
1117}
1118
1119static int flatten_lpi_states(struct acpi_processor *pr,
1120 struct acpi_lpi_states_array *curr_level,
1121 struct acpi_lpi_states_array *prev_level)
1122{
1123 int i, j, state_count = curr_level->size;
1124 struct acpi_lpi_state *p, *t = curr_level->entries;
1125
1126 curr_level->composite_states_size = 0;
1127 for (j = 0; j < state_count; j++, t++) {
1128 struct acpi_lpi_state *flpi;
1129
1130 if (!(t->flags & ACPI_LPI_STATE_FLAGS_ENABLED))
1131 continue;
1132
1133 if (flat_state_cnt >= ACPI_PROCESSOR_MAX_POWER) {
1134 pr_warn("Limiting number of LPI states to max (%d)\n",
1135 ACPI_PROCESSOR_MAX_POWER);
1136 pr_warn("Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n");
1137 break;
1138 }
1139
1140 flpi = &pr->power.lpi_states[flat_state_cnt];
1141
1142 if (!prev_level) { /* leaf/processor node */
1143 memcpy(flpi, t, sizeof(*t));
1144 stash_composite_state(curr_level, flpi);
1145 flat_state_cnt++;
1146 continue;
1147 }
1148
1149 for (i = 0; i < prev_level->composite_states_size; i++) {
1150 p = prev_level->composite_states[i];
1151 if (t->index <= p->enable_parent_state &&
1152 combine_lpi_states(p, t, flpi)) {
1153 stash_composite_state(curr_level, flpi);
1154 flat_state_cnt++;
1155 flpi++;
1156 }
1157 }
1158 }
1159
1160 kfree(curr_level->entries);
1161 return 0;
1162}
1163
1164static int acpi_processor_get_lpi_info(struct acpi_processor *pr)
1165{
1166 int ret, i;
1167 acpi_status status;
1168 acpi_handle handle = pr->handle, pr_ahandle;
1169 struct acpi_device *d = NULL;
1170 struct acpi_lpi_states_array info[2], *tmp, *prev, *curr;
1171
1172 if (!osc_pc_lpi_support_confirmed)
1173 return -EOPNOTSUPP;
1174
1175 if (!acpi_has_method(handle, "_LPI"))
1176 return -EINVAL;
1177
1178 flat_state_cnt = 0;
1179 prev = &info[0];
1180 curr = &info[1];
1181 handle = pr->handle;
1182 ret = acpi_processor_evaluate_lpi(handle, prev);
1183 if (ret)
1184 return ret;
1185 flatten_lpi_states(pr, prev, NULL);
1186
1187 status = acpi_get_parent(handle, &pr_ahandle);
1188 while (ACPI_SUCCESS(status)) {
1189 acpi_bus_get_device(pr_ahandle, &d);
1190 handle = pr_ahandle;
1191
1192 if (strcmp(acpi_device_hid(d), ACPI_PROCESSOR_CONTAINER_HID))
1193 break;
1194
1195 /* can be optional ? */
1196 if (!acpi_has_method(handle, "_LPI"))
1197 break;
1198
1199 ret = acpi_processor_evaluate_lpi(handle, curr);
1200 if (ret)
1201 break;
1202
1203 /* flatten all the LPI states in this level of hierarchy */
1204 flatten_lpi_states(pr, curr, prev);
1205
1206 tmp = prev, prev = curr, curr = tmp;
1207
1208 status = acpi_get_parent(handle, &pr_ahandle);
1209 }
1210
1211 pr->power.count = flat_state_cnt;
1212 /* reset the index after flattening */
1213 for (i = 0; i < pr->power.count; i++)
1214 pr->power.lpi_states[i].index = i;
1215
1216 /* Tell driver that _LPI is supported. */
1217 pr->flags.has_lpi = 1;
1218 pr->flags.power = 1;
1219
1220 return 0;
1221}
1222
1223int __weak acpi_processor_ffh_lpi_probe(unsigned int cpu)
1224{
1225 return -ENODEV;
1226}
1227
1228int __weak acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi)
1229{
1230 return -ENODEV;
1231}
1232
1233/**
1234 * acpi_idle_lpi_enter - enters an ACPI any LPI state
1235 * @dev: the target CPU
1236 * @drv: cpuidle driver containing cpuidle state info
1237 * @index: index of target state
1238 *
1239 * Return: 0 for success or negative value for error
1240 */
1241static int acpi_idle_lpi_enter(struct cpuidle_device *dev,
1242 struct cpuidle_driver *drv, int index)
1243{
1244 struct acpi_processor *pr;
1245 struct acpi_lpi_state *lpi;
1246
1247 pr = __this_cpu_read(processors);
1248
1249 if (unlikely(!pr))
1250 return -EINVAL;
1251
1252 lpi = &pr->power.lpi_states[index];
1253 if (lpi->entry_method == ACPI_CSTATE_FFH)
1254 return acpi_processor_ffh_lpi_enter(lpi);
1255
1256 return -EINVAL;
1257}
1258
1259static int acpi_processor_setup_lpi_states(struct acpi_processor *pr)
1260{
1261 int i;
1262 struct acpi_lpi_state *lpi;
1263 struct cpuidle_state *state;
1264 struct cpuidle_driver *drv = &acpi_idle_driver;
1265
1266 if (!pr->flags.has_lpi)
1267 return -EOPNOTSUPP;
1268
1269 for (i = 0; i < pr->power.count && i < CPUIDLE_STATE_MAX; i++) {
1270 lpi = &pr->power.lpi_states[i];
1271
1272 state = &drv->states[i];
1273 snprintf(state->name, CPUIDLE_NAME_LEN, "LPI-%d", i);
1274 strlcpy(state->desc, lpi->desc, CPUIDLE_DESC_LEN);
1275 state->exit_latency = lpi->wake_latency;
1276 state->target_residency = lpi->min_residency;
1277 if (lpi->arch_flags)
1278 state->flags |= CPUIDLE_FLAG_TIMER_STOP;
1279 state->enter = acpi_idle_lpi_enter;
1280 drv->safe_state_index = i;
1281 }
1282
1283 drv->state_count = i;
1284
1285 return 0;
1286}
1287
1288/**
1289 * acpi_processor_setup_cpuidle_states- prepares and configures cpuidle
1290 * global state data i.e. idle routines
1291 *
1292 * @pr: the ACPI processor
1293 */
1294static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr)
1295{
1296 int i;
1297 struct cpuidle_driver *drv = &acpi_idle_driver;
1298
1299 if (!pr->flags.power_setup_done || !pr->flags.power)
1300 return -EINVAL;
1301
1302 drv->safe_state_index = -1;
1303 for (i = ACPI_IDLE_STATE_START; i < CPUIDLE_STATE_MAX; i++) {
1304 drv->states[i].name[0] = '\0';
1305 drv->states[i].desc[0] = '\0';
1306 }
1307
1308 if (pr->flags.has_lpi)
1309 return acpi_processor_setup_lpi_states(pr);
1310
1311 return acpi_processor_setup_cstates(pr);
1312}
1313
1314/**
1315 * acpi_processor_setup_cpuidle_dev - prepares and configures CPUIDLE
1316 * device i.e. per-cpu data
1317 *
1318 * @pr: the ACPI processor
1319 * @dev : the cpuidle device
1320 */
1321static int acpi_processor_setup_cpuidle_dev(struct acpi_processor *pr,
1322 struct cpuidle_device *dev)
1323{
1324 if (!pr->flags.power_setup_done || !pr->flags.power || !dev)
1325 return -EINVAL;
1326
1327 dev->cpu = pr->id;
1328 if (pr->flags.has_lpi)
1329 return acpi_processor_ffh_lpi_probe(pr->id);
1330
1331 return acpi_processor_setup_cpuidle_cx(pr, dev);
1332}
1333
1334static int acpi_processor_get_power_info(struct acpi_processor *pr)
1335{
1336 int ret;
1337
1338 ret = acpi_processor_get_lpi_info(pr);
1339 if (ret)
1340 ret = acpi_processor_get_cstate_info(pr);
1341
1342 return ret;
1343}
1344
1345int acpi_processor_hotplug(struct acpi_processor *pr)
1346{
1347 int ret = 0;
1348 struct cpuidle_device *dev;
1349
1350 if (disabled_by_idle_boot_param())
1351 return 0;
1352
1353 if (!pr->flags.power_setup_done)
1354 return -ENODEV;
1355
1356 dev = per_cpu(acpi_cpuidle_device, pr->id);
1357 cpuidle_pause_and_lock();
1358 cpuidle_disable_device(dev);
1359 ret = acpi_processor_get_power_info(pr);
1360 if (!ret && pr->flags.power) {
1361 acpi_processor_setup_cpuidle_dev(pr, dev);
1362 ret = cpuidle_enable_device(dev);
1363 }
1364 cpuidle_resume_and_unlock();
1365
1366 return ret;
1367}
1368
1369int acpi_processor_power_state_has_changed(struct acpi_processor *pr)
1370{
1371 int cpu;
1372 struct acpi_processor *_pr;
1373 struct cpuidle_device *dev;
1374
1375 if (disabled_by_idle_boot_param())
1376 return 0;
1377
1378 if (!pr->flags.power_setup_done)
1379 return -ENODEV;
1380
1381 /*
1382 * FIXME: Design the ACPI notification to make it once per
1383 * system instead of once per-cpu. This condition is a hack
1384 * to make the code that updates C-States be called once.
1385 */
1386
1387 if (pr->id == 0 && cpuidle_get_driver() == &acpi_idle_driver) {
1388
1389 /* Protect against cpu-hotplug */
1390 get_online_cpus();
1391 cpuidle_pause_and_lock();
1392
1393 /* Disable all cpuidle devices */
1394 for_each_online_cpu(cpu) {
1395 _pr = per_cpu(processors, cpu);
1396 if (!_pr || !_pr->flags.power_setup_done)
1397 continue;
1398 dev = per_cpu(acpi_cpuidle_device, cpu);
1399 cpuidle_disable_device(dev);
1400 }
1401
1402 /* Populate Updated C-state information */
1403 acpi_processor_get_power_info(pr);
1404 acpi_processor_setup_cpuidle_states(pr);
1405
1406 /* Enable all cpuidle devices */
1407 for_each_online_cpu(cpu) {
1408 _pr = per_cpu(processors, cpu);
1409 if (!_pr || !_pr->flags.power_setup_done)
1410 continue;
1411 acpi_processor_get_power_info(_pr);
1412 if (_pr->flags.power) {
1413 dev = per_cpu(acpi_cpuidle_device, cpu);
1414 acpi_processor_setup_cpuidle_dev(_pr, dev);
1415 cpuidle_enable_device(dev);
1416 }
1417 }
1418 cpuidle_resume_and_unlock();
1419 put_online_cpus();
1420 }
1421
1422 return 0;
1423}
1424
1425static int acpi_processor_registered;
1426
1427int acpi_processor_power_init(struct acpi_processor *pr)
1428{
1429 int retval;
1430 struct cpuidle_device *dev;
1431
1432 if (disabled_by_idle_boot_param())
1433 return 0;
1434
1435 acpi_processor_cstate_first_run_checks();
1436
1437 if (!acpi_processor_get_power_info(pr))
1438 pr->flags.power_setup_done = 1;
1439
1440 /*
1441 * Install the idle handler if processor power management is supported.
1442 * Note that we use previously set idle handler will be used on
1443 * platforms that only support C1.
1444 */
1445 if (pr->flags.power) {
1446 /* Register acpi_idle_driver if not already registered */
1447 if (!acpi_processor_registered) {
1448 acpi_processor_setup_cpuidle_states(pr);
1449 retval = cpuidle_register_driver(&acpi_idle_driver);
1450 if (retval)
1451 return retval;
1452 pr_debug("%s registered with cpuidle\n",
1453 acpi_idle_driver.name);
1454 }
1455
1456 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
1457 if (!dev)
1458 return -ENOMEM;
1459 per_cpu(acpi_cpuidle_device, pr->id) = dev;
1460
1461 acpi_processor_setup_cpuidle_dev(pr, dev);
1462
1463 /* Register per-cpu cpuidle_device. Cpuidle driver
1464 * must already be registered before registering device
1465 */
1466 retval = cpuidle_register_device(dev);
1467 if (retval) {
1468 if (acpi_processor_registered == 0)
1469 cpuidle_unregister_driver(&acpi_idle_driver);
1470 return retval;
1471 }
1472 acpi_processor_registered++;
1473 }
1474 return 0;
1475}
1476
1477int acpi_processor_power_exit(struct acpi_processor *pr)
1478{
1479 struct cpuidle_device *dev = per_cpu(acpi_cpuidle_device, pr->id);
1480
1481 if (disabled_by_idle_boot_param())
1482 return 0;
1483
1484 if (pr->flags.power) {
1485 cpuidle_unregister_device(dev);
1486 acpi_processor_registered--;
1487 if (acpi_processor_registered == 0)
1488 cpuidle_unregister_driver(&acpi_idle_driver);
1489 }
1490
1491 pr->flags.power_setup_done = 0;
1492 return 0;
1493}
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * processor_idle - idle state submodule to the ACPI processor driver
4 *
5 * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
6 * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
7 * Copyright (C) 2004, 2005 Dominik Brodowski <linux@brodo.de>
8 * Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
9 * - Added processor hotplug support
10 * Copyright (C) 2005 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
11 * - Added support for C3 on SMP
12 */
13#define pr_fmt(fmt) "ACPI: " fmt
14
15#include <linux/module.h>
16#include <linux/acpi.h>
17#include <linux/dmi.h>
18#include <linux/sched.h> /* need_resched() */
19#include <linux/sort.h>
20#include <linux/tick.h>
21#include <linux/cpuidle.h>
22#include <linux/cpu.h>
23#include <acpi/processor.h>
24
25/*
26 * Include the apic definitions for x86 to have the APIC timer related defines
27 * available also for UP (on SMP it gets magically included via linux/smp.h).
28 * asm/acpi.h is not an option, as it would require more include magic. Also
29 * creating an empty asm-ia64/apic.h would just trade pest vs. cholera.
30 */
31#ifdef CONFIG_X86
32#include <asm/apic.h>
33#include <asm/cpu.h>
34#endif
35
36#define ACPI_IDLE_STATE_START (IS_ENABLED(CONFIG_ARCH_HAS_CPU_RELAX) ? 1 : 0)
37
38static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
39module_param(max_cstate, uint, 0000);
40static unsigned int nocst __read_mostly;
41module_param(nocst, uint, 0000);
42static int bm_check_disable __read_mostly;
43module_param(bm_check_disable, uint, 0000);
44
45static unsigned int latency_factor __read_mostly = 2;
46module_param(latency_factor, uint, 0644);
47
48static DEFINE_PER_CPU(struct cpuidle_device *, acpi_cpuidle_device);
49
50struct cpuidle_driver acpi_idle_driver = {
51 .name = "acpi_idle",
52 .owner = THIS_MODULE,
53};
54
55#ifdef CONFIG_ACPI_PROCESSOR_CSTATE
56static
57DEFINE_PER_CPU(struct acpi_processor_cx * [CPUIDLE_STATE_MAX], acpi_cstate);
58
59static int disabled_by_idle_boot_param(void)
60{
61 return boot_option_idle_override == IDLE_POLL ||
62 boot_option_idle_override == IDLE_HALT;
63}
64
65/*
66 * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
67 * For now disable this. Probably a bug somewhere else.
68 *
69 * To skip this limit, boot/load with a large max_cstate limit.
70 */
71static int set_max_cstate(const struct dmi_system_id *id)
72{
73 if (max_cstate > ACPI_PROCESSOR_MAX_POWER)
74 return 0;
75
76 pr_notice("%s detected - limiting to C%ld max_cstate."
77 " Override with \"processor.max_cstate=%d\"\n", id->ident,
78 (long)id->driver_data, ACPI_PROCESSOR_MAX_POWER + 1);
79
80 max_cstate = (long)id->driver_data;
81
82 return 0;
83}
84
85static const struct dmi_system_id processor_power_dmi_table[] = {
86 { set_max_cstate, "Clevo 5600D", {
87 DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
88 DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")},
89 (void *)2},
90 { set_max_cstate, "Pavilion zv5000", {
91 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
92 DMI_MATCH(DMI_PRODUCT_NAME,"Pavilion zv5000 (DS502A#ABA)")},
93 (void *)1},
94 { set_max_cstate, "Asus L8400B", {
95 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
96 DMI_MATCH(DMI_PRODUCT_NAME,"L8400B series Notebook PC")},
97 (void *)1},
98 {},
99};
100
101
102/*
103 * Callers should disable interrupts before the call and enable
104 * interrupts after return.
105 */
106static void __cpuidle acpi_safe_halt(void)
107{
108 if (!tif_need_resched()) {
109 safe_halt();
110 local_irq_disable();
111 }
112}
113
114#ifdef ARCH_APICTIMER_STOPS_ON_C3
115
116/*
117 * Some BIOS implementations switch to C3 in the published C2 state.
118 * This seems to be a common problem on AMD boxen, but other vendors
119 * are affected too. We pick the most conservative approach: we assume
120 * that the local APIC stops in both C2 and C3.
121 */
122static void lapic_timer_check_state(int state, struct acpi_processor *pr,
123 struct acpi_processor_cx *cx)
124{
125 struct acpi_processor_power *pwr = &pr->power;
126 u8 type = local_apic_timer_c2_ok ? ACPI_STATE_C3 : ACPI_STATE_C2;
127
128 if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
129 return;
130
131 if (boot_cpu_has_bug(X86_BUG_AMD_APIC_C1E))
132 type = ACPI_STATE_C1;
133
134 /*
135 * Check, if one of the previous states already marked the lapic
136 * unstable
137 */
138 if (pwr->timer_broadcast_on_state < state)
139 return;
140
141 if (cx->type >= type)
142 pr->power.timer_broadcast_on_state = state;
143}
144
145static void __lapic_timer_propagate_broadcast(void *arg)
146{
147 struct acpi_processor *pr = (struct acpi_processor *) arg;
148
149 if (pr->power.timer_broadcast_on_state < INT_MAX)
150 tick_broadcast_enable();
151 else
152 tick_broadcast_disable();
153}
154
155static void lapic_timer_propagate_broadcast(struct acpi_processor *pr)
156{
157 smp_call_function_single(pr->id, __lapic_timer_propagate_broadcast,
158 (void *)pr, 1);
159}
160
161/* Power(C) State timer broadcast control */
162static bool lapic_timer_needs_broadcast(struct acpi_processor *pr,
163 struct acpi_processor_cx *cx)
164{
165 return cx - pr->power.states >= pr->power.timer_broadcast_on_state;
166}
167
168#else
169
170static void lapic_timer_check_state(int state, struct acpi_processor *pr,
171 struct acpi_processor_cx *cstate) { }
172static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) { }
173
174static bool lapic_timer_needs_broadcast(struct acpi_processor *pr,
175 struct acpi_processor_cx *cx)
176{
177 return false;
178}
179
180#endif
181
182#if defined(CONFIG_X86)
183static void tsc_check_state(int state)
184{
185 switch (boot_cpu_data.x86_vendor) {
186 case X86_VENDOR_HYGON:
187 case X86_VENDOR_AMD:
188 case X86_VENDOR_INTEL:
189 case X86_VENDOR_CENTAUR:
190 case X86_VENDOR_ZHAOXIN:
191 /*
192 * AMD Fam10h TSC will tick in all
193 * C/P/S0/S1 states when this bit is set.
194 */
195 if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
196 return;
197 fallthrough;
198 default:
199 /* TSC could halt in idle, so notify users */
200 if (state > ACPI_STATE_C1)
201 mark_tsc_unstable("TSC halts in idle");
202 }
203}
204#else
205static void tsc_check_state(int state) { return; }
206#endif
207
208static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
209{
210
211 if (!pr->pblk)
212 return -ENODEV;
213
214 /* if info is obtained from pblk/fadt, type equals state */
215 pr->power.states[ACPI_STATE_C2].type = ACPI_STATE_C2;
216 pr->power.states[ACPI_STATE_C3].type = ACPI_STATE_C3;
217
218#ifndef CONFIG_HOTPLUG_CPU
219 /*
220 * Check for P_LVL2_UP flag before entering C2 and above on
221 * an SMP system.
222 */
223 if ((num_online_cpus() > 1) &&
224 !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
225 return -ENODEV;
226#endif
227
228 /* determine C2 and C3 address from pblk */
229 pr->power.states[ACPI_STATE_C2].address = pr->pblk + 4;
230 pr->power.states[ACPI_STATE_C3].address = pr->pblk + 5;
231
232 /* determine latencies from FADT */
233 pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.c2_latency;
234 pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.c3_latency;
235
236 /*
237 * FADT specified C2 latency must be less than or equal to
238 * 100 microseconds.
239 */
240 if (acpi_gbl_FADT.c2_latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
241 acpi_handle_debug(pr->handle, "C2 latency too large [%d]\n",
242 acpi_gbl_FADT.c2_latency);
243 /* invalidate C2 */
244 pr->power.states[ACPI_STATE_C2].address = 0;
245 }
246
247 /*
248 * FADT supplied C3 latency must be less than or equal to
249 * 1000 microseconds.
250 */
251 if (acpi_gbl_FADT.c3_latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
252 acpi_handle_debug(pr->handle, "C3 latency too large [%d]\n",
253 acpi_gbl_FADT.c3_latency);
254 /* invalidate C3 */
255 pr->power.states[ACPI_STATE_C3].address = 0;
256 }
257
258 acpi_handle_debug(pr->handle, "lvl2[0x%08x] lvl3[0x%08x]\n",
259 pr->power.states[ACPI_STATE_C2].address,
260 pr->power.states[ACPI_STATE_C3].address);
261
262 snprintf(pr->power.states[ACPI_STATE_C2].desc,
263 ACPI_CX_DESC_LEN, "ACPI P_LVL2 IOPORT 0x%x",
264 pr->power.states[ACPI_STATE_C2].address);
265 snprintf(pr->power.states[ACPI_STATE_C3].desc,
266 ACPI_CX_DESC_LEN, "ACPI P_LVL3 IOPORT 0x%x",
267 pr->power.states[ACPI_STATE_C3].address);
268
269 return 0;
270}
271
272static int acpi_processor_get_power_info_default(struct acpi_processor *pr)
273{
274 if (!pr->power.states[ACPI_STATE_C1].valid) {
275 /* set the first C-State to C1 */
276 /* all processors need to support C1 */
277 pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
278 pr->power.states[ACPI_STATE_C1].valid = 1;
279 pr->power.states[ACPI_STATE_C1].entry_method = ACPI_CSTATE_HALT;
280
281 snprintf(pr->power.states[ACPI_STATE_C1].desc,
282 ACPI_CX_DESC_LEN, "ACPI HLT");
283 }
284 /* the C0 state only exists as a filler in our array */
285 pr->power.states[ACPI_STATE_C0].valid = 1;
286 return 0;
287}
288
289static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
290{
291 int ret;
292
293 if (nocst)
294 return -ENODEV;
295
296 ret = acpi_processor_evaluate_cst(pr->handle, pr->id, &pr->power);
297 if (ret)
298 return ret;
299
300 if (!pr->power.count)
301 return -EFAULT;
302
303 pr->flags.has_cst = 1;
304 return 0;
305}
306
307static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
308 struct acpi_processor_cx *cx)
309{
310 static int bm_check_flag = -1;
311 static int bm_control_flag = -1;
312
313
314 if (!cx->address)
315 return;
316
317 /*
318 * PIIX4 Erratum #18: We don't support C3 when Type-F (fast)
319 * DMA transfers are used by any ISA device to avoid livelock.
320 * Note that we could disable Type-F DMA (as recommended by
321 * the erratum), but this is known to disrupt certain ISA
322 * devices thus we take the conservative approach.
323 */
324 else if (errata.piix4.fdma) {
325 acpi_handle_debug(pr->handle,
326 "C3 not supported on PIIX4 with Type-F DMA\n");
327 return;
328 }
329
330 /* All the logic here assumes flags.bm_check is same across all CPUs */
331 if (bm_check_flag == -1) {
332 /* Determine whether bm_check is needed based on CPU */
333 acpi_processor_power_init_bm_check(&(pr->flags), pr->id);
334 bm_check_flag = pr->flags.bm_check;
335 bm_control_flag = pr->flags.bm_control;
336 } else {
337 pr->flags.bm_check = bm_check_flag;
338 pr->flags.bm_control = bm_control_flag;
339 }
340
341 if (pr->flags.bm_check) {
342 if (!pr->flags.bm_control) {
343 if (pr->flags.has_cst != 1) {
344 /* bus mastering control is necessary */
345 acpi_handle_debug(pr->handle,
346 "C3 support requires BM control\n");
347 return;
348 } else {
349 /* Here we enter C3 without bus mastering */
350 acpi_handle_debug(pr->handle,
351 "C3 support without BM control\n");
352 }
353 }
354 } else {
355 /*
356 * WBINVD should be set in fadt, for C3 state to be
357 * supported on when bm_check is not required.
358 */
359 if (!(acpi_gbl_FADT.flags & ACPI_FADT_WBINVD)) {
360 acpi_handle_debug(pr->handle,
361 "Cache invalidation should work properly"
362 " for C3 to be enabled on SMP systems\n");
363 return;
364 }
365 }
366
367 /*
368 * Otherwise we've met all of our C3 requirements.
369 * Normalize the C3 latency to expidite policy. Enable
370 * checking of bus mastering status (bm_check) so we can
371 * use this in our C3 policy
372 */
373 cx->valid = 1;
374
375 /*
376 * On older chipsets, BM_RLD needs to be set
377 * in order for Bus Master activity to wake the
378 * system from C3. Newer chipsets handle DMA
379 * during C3 automatically and BM_RLD is a NOP.
380 * In either case, the proper way to
381 * handle BM_RLD is to set it and leave it set.
382 */
383 acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 1);
384
385 return;
386}
387
388static int acpi_cst_latency_cmp(const void *a, const void *b)
389{
390 const struct acpi_processor_cx *x = a, *y = b;
391
392 if (!(x->valid && y->valid))
393 return 0;
394 if (x->latency > y->latency)
395 return 1;
396 if (x->latency < y->latency)
397 return -1;
398 return 0;
399}
400static void acpi_cst_latency_swap(void *a, void *b, int n)
401{
402 struct acpi_processor_cx *x = a, *y = b;
403 u32 tmp;
404
405 if (!(x->valid && y->valid))
406 return;
407 tmp = x->latency;
408 x->latency = y->latency;
409 y->latency = tmp;
410}
411
412static int acpi_processor_power_verify(struct acpi_processor *pr)
413{
414 unsigned int i;
415 unsigned int working = 0;
416 unsigned int last_latency = 0;
417 unsigned int last_type = 0;
418 bool buggy_latency = false;
419
420 pr->power.timer_broadcast_on_state = INT_MAX;
421
422 for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
423 struct acpi_processor_cx *cx = &pr->power.states[i];
424
425 switch (cx->type) {
426 case ACPI_STATE_C1:
427 cx->valid = 1;
428 break;
429
430 case ACPI_STATE_C2:
431 if (!cx->address)
432 break;
433 cx->valid = 1;
434 break;
435
436 case ACPI_STATE_C3:
437 acpi_processor_power_verify_c3(pr, cx);
438 break;
439 }
440 if (!cx->valid)
441 continue;
442 if (cx->type >= last_type && cx->latency < last_latency)
443 buggy_latency = true;
444 last_latency = cx->latency;
445 last_type = cx->type;
446
447 lapic_timer_check_state(i, pr, cx);
448 tsc_check_state(cx->type);
449 working++;
450 }
451
452 if (buggy_latency) {
453 pr_notice("FW issue: working around C-state latencies out of order\n");
454 sort(&pr->power.states[1], max_cstate,
455 sizeof(struct acpi_processor_cx),
456 acpi_cst_latency_cmp,
457 acpi_cst_latency_swap);
458 }
459
460 lapic_timer_propagate_broadcast(pr);
461
462 return (working);
463}
464
465static int acpi_processor_get_cstate_info(struct acpi_processor *pr)
466{
467 unsigned int i;
468 int result;
469
470
471 /* NOTE: the idle thread may not be running while calling
472 * this function */
473
474 /* Zero initialize all the C-states info. */
475 memset(pr->power.states, 0, sizeof(pr->power.states));
476
477 result = acpi_processor_get_power_info_cst(pr);
478 if (result == -ENODEV)
479 result = acpi_processor_get_power_info_fadt(pr);
480
481 if (result)
482 return result;
483
484 acpi_processor_get_power_info_default(pr);
485
486 pr->power.count = acpi_processor_power_verify(pr);
487
488 /*
489 * if one state of type C2 or C3 is available, mark this
490 * CPU as being "idle manageable"
491 */
492 for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
493 if (pr->power.states[i].valid) {
494 pr->power.count = i;
495 pr->flags.power = 1;
496 }
497 }
498
499 return 0;
500}
501
502/**
503 * acpi_idle_bm_check - checks if bus master activity was detected
504 */
505static int acpi_idle_bm_check(void)
506{
507 u32 bm_status = 0;
508
509 if (bm_check_disable)
510 return 0;
511
512 acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
513 if (bm_status)
514 acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
515 /*
516 * PIIX4 Erratum #18: Note that BM_STS doesn't always reflect
517 * the true state of bus mastering activity; forcing us to
518 * manually check the BMIDEA bit of each IDE channel.
519 */
520 else if (errata.piix4.bmisx) {
521 if ((inb_p(errata.piix4.bmisx + 0x02) & 0x01)
522 || (inb_p(errata.piix4.bmisx + 0x0A) & 0x01))
523 bm_status = 1;
524 }
525 return bm_status;
526}
527
528static void wait_for_freeze(void)
529{
530#ifdef CONFIG_X86
531 /* No delay is needed if we are in guest */
532 if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
533 return;
534#endif
535 /* Dummy wait op - must do something useless after P_LVL2 read
536 because chipsets cannot guarantee that STPCLK# signal
537 gets asserted in time to freeze execution properly. */
538 inl(acpi_gbl_FADT.xpm_timer_block.address);
539}
540
541/**
542 * acpi_idle_do_entry - enter idle state using the appropriate method
543 * @cx: cstate data
544 *
545 * Caller disables interrupt before call and enables interrupt after return.
546 */
547static void __cpuidle acpi_idle_do_entry(struct acpi_processor_cx *cx)
548{
549 if (cx->entry_method == ACPI_CSTATE_FFH) {
550 /* Call into architectural FFH based C-state */
551 acpi_processor_ffh_cstate_enter(cx);
552 } else if (cx->entry_method == ACPI_CSTATE_HALT) {
553 acpi_safe_halt();
554 } else {
555 /* IO port based C-state */
556 inb(cx->address);
557 wait_for_freeze();
558 }
559}
560
561/**
562 * acpi_idle_play_dead - enters an ACPI state for long-term idle (i.e. off-lining)
563 * @dev: the target CPU
564 * @index: the index of suggested state
565 */
566static int acpi_idle_play_dead(struct cpuidle_device *dev, int index)
567{
568 struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
569
570 ACPI_FLUSH_CPU_CACHE();
571
572 while (1) {
573
574 if (cx->entry_method == ACPI_CSTATE_HALT)
575 safe_halt();
576 else if (cx->entry_method == ACPI_CSTATE_SYSTEMIO) {
577 inb(cx->address);
578 wait_for_freeze();
579 } else
580 return -ENODEV;
581
582#if defined(CONFIG_X86) && defined(CONFIG_HOTPLUG_CPU)
583 cond_wakeup_cpu0();
584#endif
585 }
586
587 /* Never reached */
588 return 0;
589}
590
591static bool acpi_idle_fallback_to_c1(struct acpi_processor *pr)
592{
593 return IS_ENABLED(CONFIG_HOTPLUG_CPU) && !pr->flags.has_cst &&
594 !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED);
595}
596
597static int c3_cpu_count;
598static DEFINE_RAW_SPINLOCK(c3_lock);
599
600/**
601 * acpi_idle_enter_bm - enters C3 with proper BM handling
602 * @drv: cpuidle driver
603 * @pr: Target processor
604 * @cx: Target state context
605 * @index: index of target state
606 */
607static int acpi_idle_enter_bm(struct cpuidle_driver *drv,
608 struct acpi_processor *pr,
609 struct acpi_processor_cx *cx,
610 int index)
611{
612 static struct acpi_processor_cx safe_cx = {
613 .entry_method = ACPI_CSTATE_HALT,
614 };
615
616 /*
617 * disable bus master
618 * bm_check implies we need ARB_DIS
619 * bm_control implies whether we can do ARB_DIS
620 *
621 * That leaves a case where bm_check is set and bm_control is not set.
622 * In that case we cannot do much, we enter C3 without doing anything.
623 */
624 bool dis_bm = pr->flags.bm_control;
625
626 /* If we can skip BM, demote to a safe state. */
627 if (!cx->bm_sts_skip && acpi_idle_bm_check()) {
628 dis_bm = false;
629 index = drv->safe_state_index;
630 if (index >= 0) {
631 cx = this_cpu_read(acpi_cstate[index]);
632 } else {
633 cx = &safe_cx;
634 index = -EBUSY;
635 }
636 }
637
638 if (dis_bm) {
639 raw_spin_lock(&c3_lock);
640 c3_cpu_count++;
641 /* Disable bus master arbitration when all CPUs are in C3 */
642 if (c3_cpu_count == num_online_cpus())
643 acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
644 raw_spin_unlock(&c3_lock);
645 }
646
647 rcu_idle_enter();
648
649 acpi_idle_do_entry(cx);
650
651 rcu_idle_exit();
652
653 /* Re-enable bus master arbitration */
654 if (dis_bm) {
655 raw_spin_lock(&c3_lock);
656 acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
657 c3_cpu_count--;
658 raw_spin_unlock(&c3_lock);
659 }
660
661 return index;
662}
663
664static int acpi_idle_enter(struct cpuidle_device *dev,
665 struct cpuidle_driver *drv, int index)
666{
667 struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
668 struct acpi_processor *pr;
669
670 pr = __this_cpu_read(processors);
671 if (unlikely(!pr))
672 return -EINVAL;
673
674 if (cx->type != ACPI_STATE_C1) {
675 if (cx->type == ACPI_STATE_C3 && pr->flags.bm_check)
676 return acpi_idle_enter_bm(drv, pr, cx, index);
677
678 /* C2 to C1 demotion. */
679 if (acpi_idle_fallback_to_c1(pr) && num_online_cpus() > 1) {
680 index = ACPI_IDLE_STATE_START;
681 cx = per_cpu(acpi_cstate[index], dev->cpu);
682 }
683 }
684
685 if (cx->type == ACPI_STATE_C3)
686 ACPI_FLUSH_CPU_CACHE();
687
688 acpi_idle_do_entry(cx);
689
690 return index;
691}
692
693static int acpi_idle_enter_s2idle(struct cpuidle_device *dev,
694 struct cpuidle_driver *drv, int index)
695{
696 struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
697
698 if (cx->type == ACPI_STATE_C3) {
699 struct acpi_processor *pr = __this_cpu_read(processors);
700
701 if (unlikely(!pr))
702 return 0;
703
704 if (pr->flags.bm_check) {
705 u8 bm_sts_skip = cx->bm_sts_skip;
706
707 /* Don't check BM_STS, do an unconditional ARB_DIS for S2IDLE */
708 cx->bm_sts_skip = 1;
709 acpi_idle_enter_bm(drv, pr, cx, index);
710 cx->bm_sts_skip = bm_sts_skip;
711
712 return 0;
713 } else {
714 ACPI_FLUSH_CPU_CACHE();
715 }
716 }
717 acpi_idle_do_entry(cx);
718
719 return 0;
720}
721
722static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr,
723 struct cpuidle_device *dev)
724{
725 int i, count = ACPI_IDLE_STATE_START;
726 struct acpi_processor_cx *cx;
727 struct cpuidle_state *state;
728
729 if (max_cstate == 0)
730 max_cstate = 1;
731
732 for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
733 state = &acpi_idle_driver.states[count];
734 cx = &pr->power.states[i];
735
736 if (!cx->valid)
737 continue;
738
739 per_cpu(acpi_cstate[count], dev->cpu) = cx;
740
741 if (lapic_timer_needs_broadcast(pr, cx))
742 state->flags |= CPUIDLE_FLAG_TIMER_STOP;
743
744 if (cx->type == ACPI_STATE_C3) {
745 state->flags |= CPUIDLE_FLAG_TLB_FLUSHED;
746 if (pr->flags.bm_check)
747 state->flags |= CPUIDLE_FLAG_RCU_IDLE;
748 }
749
750 count++;
751 if (count == CPUIDLE_STATE_MAX)
752 break;
753 }
754
755 if (!count)
756 return -EINVAL;
757
758 return 0;
759}
760
761static int acpi_processor_setup_cstates(struct acpi_processor *pr)
762{
763 int i, count;
764 struct acpi_processor_cx *cx;
765 struct cpuidle_state *state;
766 struct cpuidle_driver *drv = &acpi_idle_driver;
767
768 if (max_cstate == 0)
769 max_cstate = 1;
770
771 if (IS_ENABLED(CONFIG_ARCH_HAS_CPU_RELAX)) {
772 cpuidle_poll_state_init(drv);
773 count = 1;
774 } else {
775 count = 0;
776 }
777
778 for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
779 cx = &pr->power.states[i];
780
781 if (!cx->valid)
782 continue;
783
784 state = &drv->states[count];
785 snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i);
786 strlcpy(state->desc, cx->desc, CPUIDLE_DESC_LEN);
787 state->exit_latency = cx->latency;
788 state->target_residency = cx->latency * latency_factor;
789 state->enter = acpi_idle_enter;
790
791 state->flags = 0;
792 if (cx->type == ACPI_STATE_C1 || cx->type == ACPI_STATE_C2) {
793 state->enter_dead = acpi_idle_play_dead;
794 drv->safe_state_index = count;
795 }
796 /*
797 * Halt-induced C1 is not good for ->enter_s2idle, because it
798 * re-enables interrupts on exit. Moreover, C1 is generally not
799 * particularly interesting from the suspend-to-idle angle, so
800 * avoid C1 and the situations in which we may need to fall back
801 * to it altogether.
802 */
803 if (cx->type != ACPI_STATE_C1 && !acpi_idle_fallback_to_c1(pr))
804 state->enter_s2idle = acpi_idle_enter_s2idle;
805
806 count++;
807 if (count == CPUIDLE_STATE_MAX)
808 break;
809 }
810
811 drv->state_count = count;
812
813 if (!count)
814 return -EINVAL;
815
816 return 0;
817}
818
819static inline void acpi_processor_cstate_first_run_checks(void)
820{
821 static int first_run;
822
823 if (first_run)
824 return;
825 dmi_check_system(processor_power_dmi_table);
826 max_cstate = acpi_processor_cstate_check(max_cstate);
827 if (max_cstate < ACPI_C_STATES_MAX)
828 pr_notice("processor limited to max C-state %d\n", max_cstate);
829
830 first_run++;
831
832 if (nocst)
833 return;
834
835 acpi_processor_claim_cst_control();
836}
837#else
838
839static inline int disabled_by_idle_boot_param(void) { return 0; }
840static inline void acpi_processor_cstate_first_run_checks(void) { }
841static int acpi_processor_get_cstate_info(struct acpi_processor *pr)
842{
843 return -ENODEV;
844}
845
846static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr,
847 struct cpuidle_device *dev)
848{
849 return -EINVAL;
850}
851
852static int acpi_processor_setup_cstates(struct acpi_processor *pr)
853{
854 return -EINVAL;
855}
856
857#endif /* CONFIG_ACPI_PROCESSOR_CSTATE */
858
859struct acpi_lpi_states_array {
860 unsigned int size;
861 unsigned int composite_states_size;
862 struct acpi_lpi_state *entries;
863 struct acpi_lpi_state *composite_states[ACPI_PROCESSOR_MAX_POWER];
864};
865
866static int obj_get_integer(union acpi_object *obj, u32 *value)
867{
868 if (obj->type != ACPI_TYPE_INTEGER)
869 return -EINVAL;
870
871 *value = obj->integer.value;
872 return 0;
873}
874
875static int acpi_processor_evaluate_lpi(acpi_handle handle,
876 struct acpi_lpi_states_array *info)
877{
878 acpi_status status;
879 int ret = 0;
880 int pkg_count, state_idx = 1, loop;
881 struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
882 union acpi_object *lpi_data;
883 struct acpi_lpi_state *lpi_state;
884
885 status = acpi_evaluate_object(handle, "_LPI", NULL, &buffer);
886 if (ACPI_FAILURE(status)) {
887 acpi_handle_debug(handle, "No _LPI, giving up\n");
888 return -ENODEV;
889 }
890
891 lpi_data = buffer.pointer;
892
893 /* There must be at least 4 elements = 3 elements + 1 package */
894 if (!lpi_data || lpi_data->type != ACPI_TYPE_PACKAGE ||
895 lpi_data->package.count < 4) {
896 pr_debug("not enough elements in _LPI\n");
897 ret = -ENODATA;
898 goto end;
899 }
900
901 pkg_count = lpi_data->package.elements[2].integer.value;
902
903 /* Validate number of power states. */
904 if (pkg_count < 1 || pkg_count != lpi_data->package.count - 3) {
905 pr_debug("count given by _LPI is not valid\n");
906 ret = -ENODATA;
907 goto end;
908 }
909
910 lpi_state = kcalloc(pkg_count, sizeof(*lpi_state), GFP_KERNEL);
911 if (!lpi_state) {
912 ret = -ENOMEM;
913 goto end;
914 }
915
916 info->size = pkg_count;
917 info->entries = lpi_state;
918
919 /* LPI States start at index 3 */
920 for (loop = 3; state_idx <= pkg_count; loop++, state_idx++, lpi_state++) {
921 union acpi_object *element, *pkg_elem, *obj;
922
923 element = &lpi_data->package.elements[loop];
924 if (element->type != ACPI_TYPE_PACKAGE || element->package.count < 7)
925 continue;
926
927 pkg_elem = element->package.elements;
928
929 obj = pkg_elem + 6;
930 if (obj->type == ACPI_TYPE_BUFFER) {
931 struct acpi_power_register *reg;
932
933 reg = (struct acpi_power_register *)obj->buffer.pointer;
934 if (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO &&
935 reg->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)
936 continue;
937
938 lpi_state->address = reg->address;
939 lpi_state->entry_method =
940 reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE ?
941 ACPI_CSTATE_FFH : ACPI_CSTATE_SYSTEMIO;
942 } else if (obj->type == ACPI_TYPE_INTEGER) {
943 lpi_state->entry_method = ACPI_CSTATE_INTEGER;
944 lpi_state->address = obj->integer.value;
945 } else {
946 continue;
947 }
948
949 /* elements[7,8] skipped for now i.e. Residency/Usage counter*/
950
951 obj = pkg_elem + 9;
952 if (obj->type == ACPI_TYPE_STRING)
953 strlcpy(lpi_state->desc, obj->string.pointer,
954 ACPI_CX_DESC_LEN);
955
956 lpi_state->index = state_idx;
957 if (obj_get_integer(pkg_elem + 0, &lpi_state->min_residency)) {
958 pr_debug("No min. residency found, assuming 10 us\n");
959 lpi_state->min_residency = 10;
960 }
961
962 if (obj_get_integer(pkg_elem + 1, &lpi_state->wake_latency)) {
963 pr_debug("No wakeup residency found, assuming 10 us\n");
964 lpi_state->wake_latency = 10;
965 }
966
967 if (obj_get_integer(pkg_elem + 2, &lpi_state->flags))
968 lpi_state->flags = 0;
969
970 if (obj_get_integer(pkg_elem + 3, &lpi_state->arch_flags))
971 lpi_state->arch_flags = 0;
972
973 if (obj_get_integer(pkg_elem + 4, &lpi_state->res_cnt_freq))
974 lpi_state->res_cnt_freq = 1;
975
976 if (obj_get_integer(pkg_elem + 5, &lpi_state->enable_parent_state))
977 lpi_state->enable_parent_state = 0;
978 }
979
980 acpi_handle_debug(handle, "Found %d power states\n", state_idx);
981end:
982 kfree(buffer.pointer);
983 return ret;
984}
985
986/*
987 * flat_state_cnt - the number of composite LPI states after the process of flattening
988 */
989static int flat_state_cnt;
990
991/**
992 * combine_lpi_states - combine local and parent LPI states to form a composite LPI state
993 *
994 * @local: local LPI state
995 * @parent: parent LPI state
996 * @result: composite LPI state
997 */
998static bool combine_lpi_states(struct acpi_lpi_state *local,
999 struct acpi_lpi_state *parent,
1000 struct acpi_lpi_state *result)
1001{
1002 if (parent->entry_method == ACPI_CSTATE_INTEGER) {
1003 if (!parent->address) /* 0 means autopromotable */
1004 return false;
1005 result->address = local->address + parent->address;
1006 } else {
1007 result->address = parent->address;
1008 }
1009
1010 result->min_residency = max(local->min_residency, parent->min_residency);
1011 result->wake_latency = local->wake_latency + parent->wake_latency;
1012 result->enable_parent_state = parent->enable_parent_state;
1013 result->entry_method = local->entry_method;
1014
1015 result->flags = parent->flags;
1016 result->arch_flags = parent->arch_flags;
1017 result->index = parent->index;
1018
1019 strlcpy(result->desc, local->desc, ACPI_CX_DESC_LEN);
1020 strlcat(result->desc, "+", ACPI_CX_DESC_LEN);
1021 strlcat(result->desc, parent->desc, ACPI_CX_DESC_LEN);
1022 return true;
1023}
1024
1025#define ACPI_LPI_STATE_FLAGS_ENABLED BIT(0)
1026
1027static void stash_composite_state(struct acpi_lpi_states_array *curr_level,
1028 struct acpi_lpi_state *t)
1029{
1030 curr_level->composite_states[curr_level->composite_states_size++] = t;
1031}
1032
1033static int flatten_lpi_states(struct acpi_processor *pr,
1034 struct acpi_lpi_states_array *curr_level,
1035 struct acpi_lpi_states_array *prev_level)
1036{
1037 int i, j, state_count = curr_level->size;
1038 struct acpi_lpi_state *p, *t = curr_level->entries;
1039
1040 curr_level->composite_states_size = 0;
1041 for (j = 0; j < state_count; j++, t++) {
1042 struct acpi_lpi_state *flpi;
1043
1044 if (!(t->flags & ACPI_LPI_STATE_FLAGS_ENABLED))
1045 continue;
1046
1047 if (flat_state_cnt >= ACPI_PROCESSOR_MAX_POWER) {
1048 pr_warn("Limiting number of LPI states to max (%d)\n",
1049 ACPI_PROCESSOR_MAX_POWER);
1050 pr_warn("Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n");
1051 break;
1052 }
1053
1054 flpi = &pr->power.lpi_states[flat_state_cnt];
1055
1056 if (!prev_level) { /* leaf/processor node */
1057 memcpy(flpi, t, sizeof(*t));
1058 stash_composite_state(curr_level, flpi);
1059 flat_state_cnt++;
1060 continue;
1061 }
1062
1063 for (i = 0; i < prev_level->composite_states_size; i++) {
1064 p = prev_level->composite_states[i];
1065 if (t->index <= p->enable_parent_state &&
1066 combine_lpi_states(p, t, flpi)) {
1067 stash_composite_state(curr_level, flpi);
1068 flat_state_cnt++;
1069 flpi++;
1070 }
1071 }
1072 }
1073
1074 kfree(curr_level->entries);
1075 return 0;
1076}
1077
1078static int acpi_processor_get_lpi_info(struct acpi_processor *pr)
1079{
1080 int ret, i;
1081 acpi_status status;
1082 acpi_handle handle = pr->handle, pr_ahandle;
1083 struct acpi_device *d = NULL;
1084 struct acpi_lpi_states_array info[2], *tmp, *prev, *curr;
1085
1086 if (!osc_pc_lpi_support_confirmed)
1087 return -EOPNOTSUPP;
1088
1089 if (!acpi_has_method(handle, "_LPI"))
1090 return -EINVAL;
1091
1092 flat_state_cnt = 0;
1093 prev = &info[0];
1094 curr = &info[1];
1095 handle = pr->handle;
1096 ret = acpi_processor_evaluate_lpi(handle, prev);
1097 if (ret)
1098 return ret;
1099 flatten_lpi_states(pr, prev, NULL);
1100
1101 status = acpi_get_parent(handle, &pr_ahandle);
1102 while (ACPI_SUCCESS(status)) {
1103 acpi_bus_get_device(pr_ahandle, &d);
1104 handle = pr_ahandle;
1105
1106 if (strcmp(acpi_device_hid(d), ACPI_PROCESSOR_CONTAINER_HID))
1107 break;
1108
1109 /* can be optional ? */
1110 if (!acpi_has_method(handle, "_LPI"))
1111 break;
1112
1113 ret = acpi_processor_evaluate_lpi(handle, curr);
1114 if (ret)
1115 break;
1116
1117 /* flatten all the LPI states in this level of hierarchy */
1118 flatten_lpi_states(pr, curr, prev);
1119
1120 tmp = prev, prev = curr, curr = tmp;
1121
1122 status = acpi_get_parent(handle, &pr_ahandle);
1123 }
1124
1125 pr->power.count = flat_state_cnt;
1126 /* reset the index after flattening */
1127 for (i = 0; i < pr->power.count; i++)
1128 pr->power.lpi_states[i].index = i;
1129
1130 /* Tell driver that _LPI is supported. */
1131 pr->flags.has_lpi = 1;
1132 pr->flags.power = 1;
1133
1134 return 0;
1135}
1136
1137int __weak acpi_processor_ffh_lpi_probe(unsigned int cpu)
1138{
1139 return -ENODEV;
1140}
1141
1142int __weak acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi)
1143{
1144 return -ENODEV;
1145}
1146
1147/**
1148 * acpi_idle_lpi_enter - enters an ACPI any LPI state
1149 * @dev: the target CPU
1150 * @drv: cpuidle driver containing cpuidle state info
1151 * @index: index of target state
1152 *
1153 * Return: 0 for success or negative value for error
1154 */
1155static int acpi_idle_lpi_enter(struct cpuidle_device *dev,
1156 struct cpuidle_driver *drv, int index)
1157{
1158 struct acpi_processor *pr;
1159 struct acpi_lpi_state *lpi;
1160
1161 pr = __this_cpu_read(processors);
1162
1163 if (unlikely(!pr))
1164 return -EINVAL;
1165
1166 lpi = &pr->power.lpi_states[index];
1167 if (lpi->entry_method == ACPI_CSTATE_FFH)
1168 return acpi_processor_ffh_lpi_enter(lpi);
1169
1170 return -EINVAL;
1171}
1172
1173static int acpi_processor_setup_lpi_states(struct acpi_processor *pr)
1174{
1175 int i;
1176 struct acpi_lpi_state *lpi;
1177 struct cpuidle_state *state;
1178 struct cpuidle_driver *drv = &acpi_idle_driver;
1179
1180 if (!pr->flags.has_lpi)
1181 return -EOPNOTSUPP;
1182
1183 for (i = 0; i < pr->power.count && i < CPUIDLE_STATE_MAX; i++) {
1184 lpi = &pr->power.lpi_states[i];
1185
1186 state = &drv->states[i];
1187 snprintf(state->name, CPUIDLE_NAME_LEN, "LPI-%d", i);
1188 strlcpy(state->desc, lpi->desc, CPUIDLE_DESC_LEN);
1189 state->exit_latency = lpi->wake_latency;
1190 state->target_residency = lpi->min_residency;
1191 if (lpi->arch_flags)
1192 state->flags |= CPUIDLE_FLAG_TIMER_STOP;
1193 state->enter = acpi_idle_lpi_enter;
1194 drv->safe_state_index = i;
1195 }
1196
1197 drv->state_count = i;
1198
1199 return 0;
1200}
1201
1202/**
1203 * acpi_processor_setup_cpuidle_states- prepares and configures cpuidle
1204 * global state data i.e. idle routines
1205 *
1206 * @pr: the ACPI processor
1207 */
1208static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr)
1209{
1210 int i;
1211 struct cpuidle_driver *drv = &acpi_idle_driver;
1212
1213 if (!pr->flags.power_setup_done || !pr->flags.power)
1214 return -EINVAL;
1215
1216 drv->safe_state_index = -1;
1217 for (i = ACPI_IDLE_STATE_START; i < CPUIDLE_STATE_MAX; i++) {
1218 drv->states[i].name[0] = '\0';
1219 drv->states[i].desc[0] = '\0';
1220 }
1221
1222 if (pr->flags.has_lpi)
1223 return acpi_processor_setup_lpi_states(pr);
1224
1225 return acpi_processor_setup_cstates(pr);
1226}
1227
1228/**
1229 * acpi_processor_setup_cpuidle_dev - prepares and configures CPUIDLE
1230 * device i.e. per-cpu data
1231 *
1232 * @pr: the ACPI processor
1233 * @dev : the cpuidle device
1234 */
1235static int acpi_processor_setup_cpuidle_dev(struct acpi_processor *pr,
1236 struct cpuidle_device *dev)
1237{
1238 if (!pr->flags.power_setup_done || !pr->flags.power || !dev)
1239 return -EINVAL;
1240
1241 dev->cpu = pr->id;
1242 if (pr->flags.has_lpi)
1243 return acpi_processor_ffh_lpi_probe(pr->id);
1244
1245 return acpi_processor_setup_cpuidle_cx(pr, dev);
1246}
1247
1248static int acpi_processor_get_power_info(struct acpi_processor *pr)
1249{
1250 int ret;
1251
1252 ret = acpi_processor_get_lpi_info(pr);
1253 if (ret)
1254 ret = acpi_processor_get_cstate_info(pr);
1255
1256 return ret;
1257}
1258
1259int acpi_processor_hotplug(struct acpi_processor *pr)
1260{
1261 int ret = 0;
1262 struct cpuidle_device *dev;
1263
1264 if (disabled_by_idle_boot_param())
1265 return 0;
1266
1267 if (!pr->flags.power_setup_done)
1268 return -ENODEV;
1269
1270 dev = per_cpu(acpi_cpuidle_device, pr->id);
1271 cpuidle_pause_and_lock();
1272 cpuidle_disable_device(dev);
1273 ret = acpi_processor_get_power_info(pr);
1274 if (!ret && pr->flags.power) {
1275 acpi_processor_setup_cpuidle_dev(pr, dev);
1276 ret = cpuidle_enable_device(dev);
1277 }
1278 cpuidle_resume_and_unlock();
1279
1280 return ret;
1281}
1282
1283int acpi_processor_power_state_has_changed(struct acpi_processor *pr)
1284{
1285 int cpu;
1286 struct acpi_processor *_pr;
1287 struct cpuidle_device *dev;
1288
1289 if (disabled_by_idle_boot_param())
1290 return 0;
1291
1292 if (!pr->flags.power_setup_done)
1293 return -ENODEV;
1294
1295 /*
1296 * FIXME: Design the ACPI notification to make it once per
1297 * system instead of once per-cpu. This condition is a hack
1298 * to make the code that updates C-States be called once.
1299 */
1300
1301 if (pr->id == 0 && cpuidle_get_driver() == &acpi_idle_driver) {
1302
1303 /* Protect against cpu-hotplug */
1304 get_online_cpus();
1305 cpuidle_pause_and_lock();
1306
1307 /* Disable all cpuidle devices */
1308 for_each_online_cpu(cpu) {
1309 _pr = per_cpu(processors, cpu);
1310 if (!_pr || !_pr->flags.power_setup_done)
1311 continue;
1312 dev = per_cpu(acpi_cpuidle_device, cpu);
1313 cpuidle_disable_device(dev);
1314 }
1315
1316 /* Populate Updated C-state information */
1317 acpi_processor_get_power_info(pr);
1318 acpi_processor_setup_cpuidle_states(pr);
1319
1320 /* Enable all cpuidle devices */
1321 for_each_online_cpu(cpu) {
1322 _pr = per_cpu(processors, cpu);
1323 if (!_pr || !_pr->flags.power_setup_done)
1324 continue;
1325 acpi_processor_get_power_info(_pr);
1326 if (_pr->flags.power) {
1327 dev = per_cpu(acpi_cpuidle_device, cpu);
1328 acpi_processor_setup_cpuidle_dev(_pr, dev);
1329 cpuidle_enable_device(dev);
1330 }
1331 }
1332 cpuidle_resume_and_unlock();
1333 put_online_cpus();
1334 }
1335
1336 return 0;
1337}
1338
1339static int acpi_processor_registered;
1340
1341int acpi_processor_power_init(struct acpi_processor *pr)
1342{
1343 int retval;
1344 struct cpuidle_device *dev;
1345
1346 if (disabled_by_idle_boot_param())
1347 return 0;
1348
1349 acpi_processor_cstate_first_run_checks();
1350
1351 if (!acpi_processor_get_power_info(pr))
1352 pr->flags.power_setup_done = 1;
1353
1354 /*
1355 * Install the idle handler if processor power management is supported.
1356 * Note that we use previously set idle handler will be used on
1357 * platforms that only support C1.
1358 */
1359 if (pr->flags.power) {
1360 /* Register acpi_idle_driver if not already registered */
1361 if (!acpi_processor_registered) {
1362 acpi_processor_setup_cpuidle_states(pr);
1363 retval = cpuidle_register_driver(&acpi_idle_driver);
1364 if (retval)
1365 return retval;
1366 pr_debug("%s registered with cpuidle\n",
1367 acpi_idle_driver.name);
1368 }
1369
1370 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
1371 if (!dev)
1372 return -ENOMEM;
1373 per_cpu(acpi_cpuidle_device, pr->id) = dev;
1374
1375 acpi_processor_setup_cpuidle_dev(pr, dev);
1376
1377 /* Register per-cpu cpuidle_device. Cpuidle driver
1378 * must already be registered before registering device
1379 */
1380 retval = cpuidle_register_device(dev);
1381 if (retval) {
1382 if (acpi_processor_registered == 0)
1383 cpuidle_unregister_driver(&acpi_idle_driver);
1384 return retval;
1385 }
1386 acpi_processor_registered++;
1387 }
1388 return 0;
1389}
1390
1391int acpi_processor_power_exit(struct acpi_processor *pr)
1392{
1393 struct cpuidle_device *dev = per_cpu(acpi_cpuidle_device, pr->id);
1394
1395 if (disabled_by_idle_boot_param())
1396 return 0;
1397
1398 if (pr->flags.power) {
1399 cpuidle_unregister_device(dev);
1400 acpi_processor_registered--;
1401 if (acpi_processor_registered == 0)
1402 cpuidle_unregister_driver(&acpi_idle_driver);
1403 }
1404
1405 pr->flags.power_setup_done = 0;
1406 return 0;
1407}