Loading...
1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * core_intr.c - DesignWare HS OTG Controller common interrupt handling
4 *
5 * Copyright (C) 2004-2013 Synopsys, Inc.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. The names of the above-listed copyright holders may not be used
17 * to endorse or promote products derived from this software without
18 * specific prior written permission.
19 *
20 * ALTERNATIVELY, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") as published by the Free Software
22 * Foundation; either version 2 of the License, or (at your option) any
23 * later version.
24 *
25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
26 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
27 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
29 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
30 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
31 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
32 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
33 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
34 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
35 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
36 */
37
38/*
39 * This file contains the common interrupt handlers
40 */
41#include <linux/kernel.h>
42#include <linux/module.h>
43#include <linux/moduleparam.h>
44#include <linux/spinlock.h>
45#include <linux/interrupt.h>
46#include <linux/dma-mapping.h>
47#include <linux/io.h>
48#include <linux/slab.h>
49#include <linux/usb.h>
50
51#include <linux/usb/hcd.h>
52#include <linux/usb/ch11.h>
53
54#include "core.h"
55#include "hcd.h"
56
57static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg)
58{
59 switch (hsotg->op_state) {
60 case OTG_STATE_A_HOST:
61 return "a_host";
62 case OTG_STATE_A_SUSPEND:
63 return "a_suspend";
64 case OTG_STATE_A_PERIPHERAL:
65 return "a_peripheral";
66 case OTG_STATE_B_PERIPHERAL:
67 return "b_peripheral";
68 case OTG_STATE_B_HOST:
69 return "b_host";
70 default:
71 return "unknown";
72 }
73}
74
75/**
76 * dwc2_handle_usb_port_intr - handles OTG PRTINT interrupts.
77 * When the PRTINT interrupt fires, there are certain status bits in the Host
78 * Port that needs to get cleared.
79 *
80 * @hsotg: Programming view of DWC_otg controller
81 */
82static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg)
83{
84 u32 hprt0 = dwc2_readl(hsotg, HPRT0);
85
86 if (hprt0 & HPRT0_ENACHG) {
87 hprt0 &= ~HPRT0_ENA;
88 dwc2_writel(hsotg, hprt0, HPRT0);
89 }
90}
91
92/**
93 * dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message
94 *
95 * @hsotg: Programming view of DWC_otg controller
96 */
97static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg)
98{
99 /* Clear interrupt */
100 dwc2_writel(hsotg, GINTSTS_MODEMIS, GINTSTS);
101
102 dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n",
103 dwc2_is_host_mode(hsotg) ? "Host" : "Device");
104}
105
106/**
107 * dwc2_handle_otg_intr() - Handles the OTG Interrupts. It reads the OTG
108 * Interrupt Register (GOTGINT) to determine what interrupt has occurred.
109 *
110 * @hsotg: Programming view of DWC_otg controller
111 */
112static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
113{
114 u32 gotgint;
115 u32 gotgctl;
116 u32 gintmsk;
117
118 gotgint = dwc2_readl(hsotg, GOTGINT);
119 gotgctl = dwc2_readl(hsotg, GOTGCTL);
120 dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint,
121 dwc2_op_state_str(hsotg));
122
123 if (gotgint & GOTGINT_SES_END_DET) {
124 dev_dbg(hsotg->dev,
125 " ++OTG Interrupt: Session End Detected++ (%s)\n",
126 dwc2_op_state_str(hsotg));
127 gotgctl = dwc2_readl(hsotg, GOTGCTL);
128
129 if (dwc2_is_device_mode(hsotg))
130 dwc2_hsotg_disconnect(hsotg);
131
132 if (hsotg->op_state == OTG_STATE_B_HOST) {
133 hsotg->op_state = OTG_STATE_B_PERIPHERAL;
134 } else {
135 /*
136 * If not B_HOST and Device HNP still set, HNP did
137 * not succeed!
138 */
139 if (gotgctl & GOTGCTL_DEVHNPEN) {
140 dev_dbg(hsotg->dev, "Session End Detected\n");
141 dev_err(hsotg->dev,
142 "Device Not Connected/Responding!\n");
143 }
144
145 /*
146 * If Session End Detected the B-Cable has been
147 * disconnected
148 */
149 /* Reset to a clean state */
150 hsotg->lx_state = DWC2_L0;
151 }
152
153 gotgctl = dwc2_readl(hsotg, GOTGCTL);
154 gotgctl &= ~GOTGCTL_DEVHNPEN;
155 dwc2_writel(hsotg, gotgctl, GOTGCTL);
156 }
157
158 if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) {
159 dev_dbg(hsotg->dev,
160 " ++OTG Interrupt: Session Request Success Status Change++\n");
161 gotgctl = dwc2_readl(hsotg, GOTGCTL);
162 if (gotgctl & GOTGCTL_SESREQSCS) {
163 if (hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS &&
164 hsotg->params.i2c_enable) {
165 hsotg->srp_success = 1;
166 } else {
167 /* Clear Session Request */
168 gotgctl = dwc2_readl(hsotg, GOTGCTL);
169 gotgctl &= ~GOTGCTL_SESREQ;
170 dwc2_writel(hsotg, gotgctl, GOTGCTL);
171 }
172 }
173 }
174
175 if (gotgint & GOTGINT_HST_NEG_SUC_STS_CHNG) {
176 /*
177 * Print statements during the HNP interrupt handling
178 * can cause it to fail
179 */
180 gotgctl = dwc2_readl(hsotg, GOTGCTL);
181 /*
182 * WA for 3.00a- HW is not setting cur_mode, even sometimes
183 * this does not help
184 */
185 if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a)
186 udelay(100);
187 if (gotgctl & GOTGCTL_HSTNEGSCS) {
188 if (dwc2_is_host_mode(hsotg)) {
189 hsotg->op_state = OTG_STATE_B_HOST;
190 /*
191 * Need to disable SOF interrupt immediately.
192 * When switching from device to host, the PCD
193 * interrupt handler won't handle the interrupt
194 * if host mode is already set. The HCD
195 * interrupt handler won't get called if the
196 * HCD state is HALT. This means that the
197 * interrupt does not get handled and Linux
198 * complains loudly.
199 */
200 gintmsk = dwc2_readl(hsotg, GINTMSK);
201 gintmsk &= ~GINTSTS_SOF;
202 dwc2_writel(hsotg, gintmsk, GINTMSK);
203
204 /*
205 * Call callback function with spin lock
206 * released
207 */
208 spin_unlock(&hsotg->lock);
209
210 /* Initialize the Core for Host mode */
211 dwc2_hcd_start(hsotg);
212 spin_lock(&hsotg->lock);
213 hsotg->op_state = OTG_STATE_B_HOST;
214 }
215 } else {
216 gotgctl = dwc2_readl(hsotg, GOTGCTL);
217 gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN);
218 dwc2_writel(hsotg, gotgctl, GOTGCTL);
219 dev_dbg(hsotg->dev, "HNP Failed\n");
220 dev_err(hsotg->dev,
221 "Device Not Connected/Responding\n");
222 }
223 }
224
225 if (gotgint & GOTGINT_HST_NEG_DET) {
226 /*
227 * The disconnect interrupt is set at the same time as
228 * Host Negotiation Detected. During the mode switch all
229 * interrupts are cleared so the disconnect interrupt
230 * handler will not get executed.
231 */
232 dev_dbg(hsotg->dev,
233 " ++OTG Interrupt: Host Negotiation Detected++ (%s)\n",
234 (dwc2_is_host_mode(hsotg) ? "Host" : "Device"));
235 if (dwc2_is_device_mode(hsotg)) {
236 dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n",
237 hsotg->op_state);
238 spin_unlock(&hsotg->lock);
239 dwc2_hcd_disconnect(hsotg, false);
240 spin_lock(&hsotg->lock);
241 hsotg->op_state = OTG_STATE_A_PERIPHERAL;
242 } else {
243 /* Need to disable SOF interrupt immediately */
244 gintmsk = dwc2_readl(hsotg, GINTMSK);
245 gintmsk &= ~GINTSTS_SOF;
246 dwc2_writel(hsotg, gintmsk, GINTMSK);
247 spin_unlock(&hsotg->lock);
248 dwc2_hcd_start(hsotg);
249 spin_lock(&hsotg->lock);
250 hsotg->op_state = OTG_STATE_A_HOST;
251 }
252 }
253
254 if (gotgint & GOTGINT_A_DEV_TOUT_CHG)
255 dev_dbg(hsotg->dev,
256 " ++OTG Interrupt: A-Device Timeout Change++\n");
257 if (gotgint & GOTGINT_DBNCE_DONE)
258 dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n");
259
260 /* Clear GOTGINT */
261 dwc2_writel(hsotg, gotgint, GOTGINT);
262}
263
264/**
265 * dwc2_handle_conn_id_status_change_intr() - Handles the Connector ID Status
266 * Change Interrupt
267 *
268 * @hsotg: Programming view of DWC_otg controller
269 *
270 * Reads the OTG Interrupt Register (GOTCTL) to determine whether this is a
271 * Device to Host Mode transition or a Host to Device Mode transition. This only
272 * occurs when the cable is connected/removed from the PHY connector.
273 */
274static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg)
275{
276 u32 gintmsk;
277
278 /* Clear interrupt */
279 dwc2_writel(hsotg, GINTSTS_CONIDSTSCHNG, GINTSTS);
280
281 /* Need to disable SOF interrupt immediately */
282 gintmsk = dwc2_readl(hsotg, GINTMSK);
283 gintmsk &= ~GINTSTS_SOF;
284 dwc2_writel(hsotg, gintmsk, GINTMSK);
285
286 dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++ (%s)\n",
287 dwc2_is_host_mode(hsotg) ? "Host" : "Device");
288
289 /*
290 * Need to schedule a work, as there are possible DELAY function calls.
291 * Release lock before scheduling workq as it holds spinlock during
292 * scheduling.
293 */
294 if (hsotg->wq_otg) {
295 spin_unlock(&hsotg->lock);
296 queue_work(hsotg->wq_otg, &hsotg->wf_otg);
297 spin_lock(&hsotg->lock);
298 }
299}
300
301/**
302 * dwc2_handle_session_req_intr() - This interrupt indicates that a device is
303 * initiating the Session Request Protocol to request the host to turn on bus
304 * power so a new session can begin
305 *
306 * @hsotg: Programming view of DWC_otg controller
307 *
308 * This handler responds by turning on bus power. If the DWC_otg controller is
309 * in low power mode, this handler brings the controller out of low power mode
310 * before turning on bus power.
311 */
312static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
313{
314 int ret;
315
316 /* Clear interrupt */
317 dwc2_writel(hsotg, GINTSTS_SESSREQINT, GINTSTS);
318
319 dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n",
320 hsotg->lx_state);
321
322 if (dwc2_is_device_mode(hsotg)) {
323 if (hsotg->lx_state == DWC2_L2) {
324 ret = dwc2_exit_partial_power_down(hsotg, true);
325 if (ret && (ret != -ENOTSUPP))
326 dev_err(hsotg->dev,
327 "exit power_down failed\n");
328 }
329
330 /*
331 * Report disconnect if there is any previous session
332 * established
333 */
334 dwc2_hsotg_disconnect(hsotg);
335 }
336}
337
338/**
339 * dwc2_wakeup_from_lpm_l1 - Exit the device from LPM L1 state
340 *
341 * @hsotg: Programming view of DWC_otg controller
342 *
343 */
344static void dwc2_wakeup_from_lpm_l1(struct dwc2_hsotg *hsotg)
345{
346 u32 glpmcfg;
347 u32 i = 0;
348
349 if (hsotg->lx_state != DWC2_L1) {
350 dev_err(hsotg->dev, "Core isn't in DWC2_L1 state\n");
351 return;
352 }
353
354 glpmcfg = dwc2_readl(hsotg, GLPMCFG);
355 if (dwc2_is_device_mode(hsotg)) {
356 dev_dbg(hsotg->dev, "Exit from L1 state\n");
357 glpmcfg &= ~GLPMCFG_ENBLSLPM;
358 glpmcfg &= ~GLPMCFG_HIRD_THRES_EN;
359 dwc2_writel(hsotg, glpmcfg, GLPMCFG);
360
361 do {
362 glpmcfg = dwc2_readl(hsotg, GLPMCFG);
363
364 if (!(glpmcfg & (GLPMCFG_COREL1RES_MASK |
365 GLPMCFG_L1RESUMEOK | GLPMCFG_SLPSTS)))
366 break;
367
368 udelay(1);
369 } while (++i < 200);
370
371 if (i == 200) {
372 dev_err(hsotg->dev, "Failed to exit L1 sleep state in 200us.\n");
373 return;
374 }
375 dwc2_gadget_init_lpm(hsotg);
376 } else {
377 /* TODO */
378 dev_err(hsotg->dev, "Host side LPM is not supported.\n");
379 return;
380 }
381
382 /* Change to L0 state */
383 hsotg->lx_state = DWC2_L0;
384
385 /* Inform gadget to exit from L1 */
386 call_gadget(hsotg, resume);
387}
388
389/*
390 * This interrupt indicates that the DWC_otg controller has detected a
391 * resume or remote wakeup sequence. If the DWC_otg controller is in
392 * low power mode, the handler must brings the controller out of low
393 * power mode. The controller automatically begins resume signaling.
394 * The handler schedules a time to stop resume signaling.
395 */
396static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
397{
398 int ret;
399
400 /* Clear interrupt */
401 dwc2_writel(hsotg, GINTSTS_WKUPINT, GINTSTS);
402
403 dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n");
404 dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state);
405
406 if (hsotg->lx_state == DWC2_L1) {
407 dwc2_wakeup_from_lpm_l1(hsotg);
408 return;
409 }
410
411 if (dwc2_is_device_mode(hsotg)) {
412 dev_dbg(hsotg->dev, "DSTS=0x%0x\n",
413 dwc2_readl(hsotg, DSTS));
414 if (hsotg->lx_state == DWC2_L2) {
415 u32 dctl = dwc2_readl(hsotg, DCTL);
416
417 /* Clear Remote Wakeup Signaling */
418 dctl &= ~DCTL_RMTWKUPSIG;
419 dwc2_writel(hsotg, dctl, DCTL);
420 ret = dwc2_exit_partial_power_down(hsotg, true);
421 if (ret && (ret != -ENOTSUPP))
422 dev_err(hsotg->dev, "exit power_down failed\n");
423
424 call_gadget(hsotg, resume);
425 }
426 /* Change to L0 state */
427 hsotg->lx_state = DWC2_L0;
428 } else {
429 if (hsotg->params.power_down)
430 return;
431
432 if (hsotg->lx_state != DWC2_L1) {
433 u32 pcgcctl = dwc2_readl(hsotg, PCGCTL);
434
435 /* Restart the Phy Clock */
436 pcgcctl &= ~PCGCTL_STOPPCLK;
437 dwc2_writel(hsotg, pcgcctl, PCGCTL);
438
439 /*
440 * If we've got this quirk then the PHY is stuck upon
441 * wakeup. Assert reset. This will propagate out and
442 * eventually we'll re-enumerate the device. Not great
443 * but the best we can do. We can't call phy_reset()
444 * at interrupt time but there's no hurry, so we'll
445 * schedule it for later.
446 */
447 if (hsotg->reset_phy_on_wake)
448 dwc2_host_schedule_phy_reset(hsotg);
449
450 mod_timer(&hsotg->wkp_timer,
451 jiffies + msecs_to_jiffies(71));
452 } else {
453 /* Change to L0 state */
454 hsotg->lx_state = DWC2_L0;
455 }
456 }
457}
458
459/*
460 * This interrupt indicates that a device has been disconnected from the
461 * root port
462 */
463static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg)
464{
465 dwc2_writel(hsotg, GINTSTS_DISCONNINT, GINTSTS);
466
467 dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n",
468 dwc2_is_host_mode(hsotg) ? "Host" : "Device",
469 dwc2_op_state_str(hsotg));
470
471 if (hsotg->op_state == OTG_STATE_A_HOST)
472 dwc2_hcd_disconnect(hsotg, false);
473}
474
475/*
476 * This interrupt indicates that SUSPEND state has been detected on the USB.
477 *
478 * For HNP the USB Suspend interrupt signals the change from "a_peripheral"
479 * to "a_host".
480 *
481 * When power management is enabled the core will be put in low power mode.
482 */
483static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg)
484{
485 u32 dsts;
486 int ret;
487
488 /* Clear interrupt */
489 dwc2_writel(hsotg, GINTSTS_USBSUSP, GINTSTS);
490
491 dev_dbg(hsotg->dev, "USB SUSPEND\n");
492
493 if (dwc2_is_device_mode(hsotg)) {
494 /*
495 * Check the Device status register to determine if the Suspend
496 * state is active
497 */
498 dsts = dwc2_readl(hsotg, DSTS);
499 dev_dbg(hsotg->dev, "%s: DSTS=0x%0x\n", __func__, dsts);
500 dev_dbg(hsotg->dev,
501 "DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d HWCFG4.Hibernation=%d\n",
502 !!(dsts & DSTS_SUSPSTS),
503 hsotg->hw_params.power_optimized,
504 hsotg->hw_params.hibernation);
505
506 /* Ignore suspend request before enumeration */
507 if (!dwc2_is_device_connected(hsotg)) {
508 dev_dbg(hsotg->dev,
509 "ignore suspend request before enumeration\n");
510 return;
511 }
512 if (dsts & DSTS_SUSPSTS) {
513 if (hsotg->hw_params.power_optimized) {
514 ret = dwc2_enter_partial_power_down(hsotg);
515 if (ret) {
516 if (ret != -ENOTSUPP)
517 dev_err(hsotg->dev,
518 "%s: enter partial_power_down failed\n",
519 __func__);
520 goto skip_power_saving;
521 }
522
523 udelay(100);
524
525 /* Ask phy to be suspended */
526 if (!IS_ERR_OR_NULL(hsotg->uphy))
527 usb_phy_set_suspend(hsotg->uphy, true);
528 }
529
530 if (hsotg->hw_params.hibernation) {
531 ret = dwc2_enter_hibernation(hsotg, 0);
532 if (ret && ret != -ENOTSUPP)
533 dev_err(hsotg->dev,
534 "%s: enter hibernation failed\n",
535 __func__);
536 }
537skip_power_saving:
538 /*
539 * Change to L2 (suspend) state before releasing
540 * spinlock
541 */
542 hsotg->lx_state = DWC2_L2;
543
544 /* Call gadget suspend callback */
545 call_gadget(hsotg, suspend);
546 }
547 } else {
548 if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) {
549 dev_dbg(hsotg->dev, "a_peripheral->a_host\n");
550
551 /* Change to L2 (suspend) state */
552 hsotg->lx_state = DWC2_L2;
553 /* Clear the a_peripheral flag, back to a_host */
554 spin_unlock(&hsotg->lock);
555 dwc2_hcd_start(hsotg);
556 spin_lock(&hsotg->lock);
557 hsotg->op_state = OTG_STATE_A_HOST;
558 }
559 }
560}
561
562/**
563 * dwc2_handle_lpm_intr - GINTSTS_LPMTRANRCVD Interrupt handler
564 *
565 * @hsotg: Programming view of DWC_otg controller
566 *
567 */
568static void dwc2_handle_lpm_intr(struct dwc2_hsotg *hsotg)
569{
570 u32 glpmcfg;
571 u32 pcgcctl;
572 u32 hird;
573 u32 hird_thres;
574 u32 hird_thres_en;
575 u32 enslpm;
576
577 /* Clear interrupt */
578 dwc2_writel(hsotg, GINTSTS_LPMTRANRCVD, GINTSTS);
579
580 glpmcfg = dwc2_readl(hsotg, GLPMCFG);
581
582 if (!(glpmcfg & GLPMCFG_LPMCAP)) {
583 dev_err(hsotg->dev, "Unexpected LPM interrupt\n");
584 return;
585 }
586
587 hird = (glpmcfg & GLPMCFG_HIRD_MASK) >> GLPMCFG_HIRD_SHIFT;
588 hird_thres = (glpmcfg & GLPMCFG_HIRD_THRES_MASK &
589 ~GLPMCFG_HIRD_THRES_EN) >> GLPMCFG_HIRD_THRES_SHIFT;
590 hird_thres_en = glpmcfg & GLPMCFG_HIRD_THRES_EN;
591 enslpm = glpmcfg & GLPMCFG_ENBLSLPM;
592
593 if (dwc2_is_device_mode(hsotg)) {
594 dev_dbg(hsotg->dev, "HIRD_THRES_EN = %d\n", hird_thres_en);
595
596 if (hird_thres_en && hird >= hird_thres) {
597 dev_dbg(hsotg->dev, "L1 with utmi_l1_suspend_n\n");
598 } else if (enslpm) {
599 dev_dbg(hsotg->dev, "L1 with utmi_sleep_n\n");
600 } else {
601 dev_dbg(hsotg->dev, "Entering Sleep with L1 Gating\n");
602
603 pcgcctl = dwc2_readl(hsotg, PCGCTL);
604 pcgcctl |= PCGCTL_ENBL_SLEEP_GATING;
605 dwc2_writel(hsotg, pcgcctl, PCGCTL);
606 }
607 /**
608 * Examine prt_sleep_sts after TL1TokenTetry period max (10 us)
609 */
610 udelay(10);
611
612 glpmcfg = dwc2_readl(hsotg, GLPMCFG);
613
614 if (glpmcfg & GLPMCFG_SLPSTS) {
615 /* Save the current state */
616 hsotg->lx_state = DWC2_L1;
617 dev_dbg(hsotg->dev,
618 "Core is in L1 sleep glpmcfg=%08x\n", glpmcfg);
619
620 /* Inform gadget that we are in L1 state */
621 call_gadget(hsotg, suspend);
622 }
623 }
624}
625
626#define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \
627 GINTSTS_CONIDSTSCHNG | GINTSTS_OTGINT | \
628 GINTSTS_MODEMIS | GINTSTS_DISCONNINT | \
629 GINTSTS_USBSUSP | GINTSTS_PRTINT | \
630 GINTSTS_LPMTRANRCVD)
631
632/*
633 * This function returns the Core Interrupt register
634 */
635static u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg)
636{
637 u32 gintsts;
638 u32 gintmsk;
639 u32 gahbcfg;
640 u32 gintmsk_common = GINTMSK_COMMON;
641
642 gintsts = dwc2_readl(hsotg, GINTSTS);
643 gintmsk = dwc2_readl(hsotg, GINTMSK);
644 gahbcfg = dwc2_readl(hsotg, GAHBCFG);
645
646 /* If any common interrupts set */
647 if (gintsts & gintmsk_common)
648 dev_dbg(hsotg->dev, "gintsts=%08x gintmsk=%08x\n",
649 gintsts, gintmsk);
650
651 if (gahbcfg & GAHBCFG_GLBL_INTR_EN)
652 return gintsts & gintmsk & gintmsk_common;
653 else
654 return 0;
655}
656
657/*
658 * GPWRDN interrupt handler.
659 *
660 * The GPWRDN interrupts are those that occur in both Host and
661 * Device mode while core is in hibernated state.
662 */
663static void dwc2_handle_gpwrdn_intr(struct dwc2_hsotg *hsotg)
664{
665 u32 gpwrdn;
666 int linestate;
667
668 gpwrdn = dwc2_readl(hsotg, GPWRDN);
669 /* clear all interrupt */
670 dwc2_writel(hsotg, gpwrdn, GPWRDN);
671 linestate = (gpwrdn & GPWRDN_LINESTATE_MASK) >> GPWRDN_LINESTATE_SHIFT;
672 dev_dbg(hsotg->dev,
673 "%s: dwc2_handle_gpwrdwn_intr called gpwrdn= %08x\n", __func__,
674 gpwrdn);
675
676 if ((gpwrdn & GPWRDN_DISCONN_DET) &&
677 (gpwrdn & GPWRDN_DISCONN_DET_MSK) && !linestate) {
678 u32 gpwrdn_tmp;
679
680 dev_dbg(hsotg->dev, "%s: GPWRDN_DISCONN_DET\n", __func__);
681
682 /* Switch-on voltage to the core */
683 gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
684 gpwrdn_tmp &= ~GPWRDN_PWRDNSWTCH;
685 dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
686 udelay(10);
687
688 /* Reset core */
689 gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
690 gpwrdn_tmp &= ~GPWRDN_PWRDNRSTN;
691 dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
692 udelay(10);
693
694 /* Disable Power Down Clamp */
695 gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
696 gpwrdn_tmp &= ~GPWRDN_PWRDNCLMP;
697 dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
698 udelay(10);
699
700 /* Deassert reset core */
701 gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
702 gpwrdn_tmp |= GPWRDN_PWRDNRSTN;
703 dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
704 udelay(10);
705
706 /* Disable PMU interrupt */
707 gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
708 gpwrdn_tmp &= ~GPWRDN_PMUINTSEL;
709 dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
710
711 /* De-assert Wakeup Logic */
712 gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
713 gpwrdn_tmp &= ~GPWRDN_PMUACTV;
714 dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
715
716 hsotg->hibernated = 0;
717
718 if (gpwrdn & GPWRDN_IDSTS) {
719 hsotg->op_state = OTG_STATE_B_PERIPHERAL;
720 dwc2_core_init(hsotg, false);
721 dwc2_enable_global_interrupts(hsotg);
722 dwc2_hsotg_core_init_disconnected(hsotg, false);
723 dwc2_hsotg_core_connect(hsotg);
724 } else {
725 hsotg->op_state = OTG_STATE_A_HOST;
726
727 /* Initialize the Core for Host mode */
728 dwc2_core_init(hsotg, false);
729 dwc2_enable_global_interrupts(hsotg);
730 dwc2_hcd_start(hsotg);
731 }
732 }
733
734 if ((gpwrdn & GPWRDN_LNSTSCHG) &&
735 (gpwrdn & GPWRDN_LNSTSCHG_MSK) && linestate) {
736 dev_dbg(hsotg->dev, "%s: GPWRDN_LNSTSCHG\n", __func__);
737 if (hsotg->hw_params.hibernation &&
738 hsotg->hibernated) {
739 if (gpwrdn & GPWRDN_IDSTS) {
740 dwc2_exit_hibernation(hsotg, 0, 0, 0);
741 call_gadget(hsotg, resume);
742 } else {
743 dwc2_exit_hibernation(hsotg, 1, 0, 1);
744 }
745 }
746 }
747 if ((gpwrdn & GPWRDN_RST_DET) && (gpwrdn & GPWRDN_RST_DET_MSK)) {
748 dev_dbg(hsotg->dev, "%s: GPWRDN_RST_DET\n", __func__);
749 if (!linestate && (gpwrdn & GPWRDN_BSESSVLD))
750 dwc2_exit_hibernation(hsotg, 0, 1, 0);
751 }
752 if ((gpwrdn & GPWRDN_STS_CHGINT) &&
753 (gpwrdn & GPWRDN_STS_CHGINT_MSK) && linestate) {
754 dev_dbg(hsotg->dev, "%s: GPWRDN_STS_CHGINT\n", __func__);
755 if (hsotg->hw_params.hibernation &&
756 hsotg->hibernated) {
757 if (gpwrdn & GPWRDN_IDSTS) {
758 dwc2_exit_hibernation(hsotg, 0, 0, 0);
759 call_gadget(hsotg, resume);
760 } else {
761 dwc2_exit_hibernation(hsotg, 1, 0, 1);
762 }
763 }
764 }
765}
766
767/*
768 * Common interrupt handler
769 *
770 * The common interrupts are those that occur in both Host and Device mode.
771 * This handler handles the following interrupts:
772 * - Mode Mismatch Interrupt
773 * - OTG Interrupt
774 * - Connector ID Status Change Interrupt
775 * - Disconnect Interrupt
776 * - Session Request Interrupt
777 * - Resume / Remote Wakeup Detected Interrupt
778 * - Suspend Interrupt
779 */
780irqreturn_t dwc2_handle_common_intr(int irq, void *dev)
781{
782 struct dwc2_hsotg *hsotg = dev;
783 u32 gintsts;
784 irqreturn_t retval = IRQ_NONE;
785
786 spin_lock(&hsotg->lock);
787
788 if (!dwc2_is_controller_alive(hsotg)) {
789 dev_warn(hsotg->dev, "Controller is dead\n");
790 goto out;
791 }
792
793 /* Reading current frame number value in device or host modes. */
794 if (dwc2_is_device_mode(hsotg))
795 hsotg->frame_number = (dwc2_readl(hsotg, DSTS)
796 & DSTS_SOFFN_MASK) >> DSTS_SOFFN_SHIFT;
797 else
798 hsotg->frame_number = (dwc2_readl(hsotg, HFNUM)
799 & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT;
800
801 gintsts = dwc2_read_common_intr(hsotg);
802 if (gintsts & ~GINTSTS_PRTINT)
803 retval = IRQ_HANDLED;
804
805 /* In case of hibernated state gintsts must not work */
806 if (hsotg->hibernated) {
807 dwc2_handle_gpwrdn_intr(hsotg);
808 retval = IRQ_HANDLED;
809 goto out;
810 }
811
812 if (gintsts & GINTSTS_MODEMIS)
813 dwc2_handle_mode_mismatch_intr(hsotg);
814 if (gintsts & GINTSTS_OTGINT)
815 dwc2_handle_otg_intr(hsotg);
816 if (gintsts & GINTSTS_CONIDSTSCHNG)
817 dwc2_handle_conn_id_status_change_intr(hsotg);
818 if (gintsts & GINTSTS_DISCONNINT)
819 dwc2_handle_disconnect_intr(hsotg);
820 if (gintsts & GINTSTS_SESSREQINT)
821 dwc2_handle_session_req_intr(hsotg);
822 if (gintsts & GINTSTS_WKUPINT)
823 dwc2_handle_wakeup_detected_intr(hsotg);
824 if (gintsts & GINTSTS_USBSUSP)
825 dwc2_handle_usb_suspend_intr(hsotg);
826 if (gintsts & GINTSTS_LPMTRANRCVD)
827 dwc2_handle_lpm_intr(hsotg);
828
829 if (gintsts & GINTSTS_PRTINT) {
830 /*
831 * The port interrupt occurs while in device mode with HPRT0
832 * Port Enable/Disable
833 */
834 if (dwc2_is_device_mode(hsotg)) {
835 dev_dbg(hsotg->dev,
836 " --Port interrupt received in Device mode--\n");
837 dwc2_handle_usb_port_intr(hsotg);
838 retval = IRQ_HANDLED;
839 }
840 }
841
842out:
843 spin_unlock(&hsotg->lock);
844 return retval;
845}
1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * core_intr.c - DesignWare HS OTG Controller common interrupt handling
4 *
5 * Copyright (C) 2004-2013 Synopsys, Inc.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. The names of the above-listed copyright holders may not be used
17 * to endorse or promote products derived from this software without
18 * specific prior written permission.
19 *
20 * ALTERNATIVELY, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") as published by the Free Software
22 * Foundation; either version 2 of the License, or (at your option) any
23 * later version.
24 *
25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
26 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
27 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
29 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
30 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
31 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
32 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
33 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
34 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
35 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
36 */
37
38/*
39 * This file contains the common interrupt handlers
40 */
41#include <linux/kernel.h>
42#include <linux/module.h>
43#include <linux/moduleparam.h>
44#include <linux/spinlock.h>
45#include <linux/interrupt.h>
46#include <linux/dma-mapping.h>
47#include <linux/io.h>
48#include <linux/slab.h>
49#include <linux/usb.h>
50
51#include <linux/usb/hcd.h>
52#include <linux/usb/ch11.h>
53
54#include "core.h"
55#include "hcd.h"
56
57static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg)
58{
59 switch (hsotg->op_state) {
60 case OTG_STATE_A_HOST:
61 return "a_host";
62 case OTG_STATE_A_SUSPEND:
63 return "a_suspend";
64 case OTG_STATE_A_PERIPHERAL:
65 return "a_peripheral";
66 case OTG_STATE_B_PERIPHERAL:
67 return "b_peripheral";
68 case OTG_STATE_B_HOST:
69 return "b_host";
70 default:
71 return "unknown";
72 }
73}
74
75/**
76 * dwc2_handle_usb_port_intr - handles OTG PRTINT interrupts.
77 * When the PRTINT interrupt fires, there are certain status bits in the Host
78 * Port that needs to get cleared.
79 *
80 * @hsotg: Programming view of DWC_otg controller
81 */
82static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg)
83{
84 u32 hprt0 = dwc2_readl(hsotg, HPRT0);
85
86 if (hprt0 & HPRT0_ENACHG) {
87 hprt0 &= ~HPRT0_ENA;
88 dwc2_writel(hsotg, hprt0, HPRT0);
89 }
90}
91
92/**
93 * dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message
94 *
95 * @hsotg: Programming view of DWC_otg controller
96 */
97static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg)
98{
99 /* Clear interrupt */
100 dwc2_writel(hsotg, GINTSTS_MODEMIS, GINTSTS);
101
102 dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n",
103 dwc2_is_host_mode(hsotg) ? "Host" : "Device");
104}
105
106/**
107 * dwc2_handle_otg_intr() - Handles the OTG Interrupts. It reads the OTG
108 * Interrupt Register (GOTGINT) to determine what interrupt has occurred.
109 *
110 * @hsotg: Programming view of DWC_otg controller
111 */
112static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
113{
114 u32 gotgint;
115 u32 gotgctl;
116 u32 gintmsk;
117
118 gotgint = dwc2_readl(hsotg, GOTGINT);
119 gotgctl = dwc2_readl(hsotg, GOTGCTL);
120 dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint,
121 dwc2_op_state_str(hsotg));
122
123 if (gotgint & GOTGINT_SES_END_DET) {
124 dev_dbg(hsotg->dev,
125 " ++OTG Interrupt: Session End Detected++ (%s)\n",
126 dwc2_op_state_str(hsotg));
127 gotgctl = dwc2_readl(hsotg, GOTGCTL);
128
129 if (dwc2_is_device_mode(hsotg))
130 dwc2_hsotg_disconnect(hsotg);
131
132 if (hsotg->op_state == OTG_STATE_B_HOST) {
133 hsotg->op_state = OTG_STATE_B_PERIPHERAL;
134 } else {
135 /*
136 * If not B_HOST and Device HNP still set, HNP did
137 * not succeed!
138 */
139 if (gotgctl & GOTGCTL_DEVHNPEN) {
140 dev_dbg(hsotg->dev, "Session End Detected\n");
141 dev_err(hsotg->dev,
142 "Device Not Connected/Responding!\n");
143 }
144
145 /*
146 * If Session End Detected the B-Cable has been
147 * disconnected
148 */
149 /* Reset to a clean state */
150 hsotg->lx_state = DWC2_L0;
151 }
152
153 gotgctl = dwc2_readl(hsotg, GOTGCTL);
154 gotgctl &= ~GOTGCTL_DEVHNPEN;
155 dwc2_writel(hsotg, gotgctl, GOTGCTL);
156 }
157
158 if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) {
159 dev_dbg(hsotg->dev,
160 " ++OTG Interrupt: Session Request Success Status Change++\n");
161 gotgctl = dwc2_readl(hsotg, GOTGCTL);
162 if (gotgctl & GOTGCTL_SESREQSCS) {
163 if (hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS &&
164 hsotg->params.i2c_enable) {
165 hsotg->srp_success = 1;
166 } else {
167 /* Clear Session Request */
168 gotgctl = dwc2_readl(hsotg, GOTGCTL);
169 gotgctl &= ~GOTGCTL_SESREQ;
170 dwc2_writel(hsotg, gotgctl, GOTGCTL);
171 }
172 }
173 }
174
175 if (gotgint & GOTGINT_HST_NEG_SUC_STS_CHNG) {
176 /*
177 * Print statements during the HNP interrupt handling
178 * can cause it to fail
179 */
180 gotgctl = dwc2_readl(hsotg, GOTGCTL);
181 /*
182 * WA for 3.00a- HW is not setting cur_mode, even sometimes
183 * this does not help
184 */
185 if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a)
186 udelay(100);
187 if (gotgctl & GOTGCTL_HSTNEGSCS) {
188 if (dwc2_is_host_mode(hsotg)) {
189 hsotg->op_state = OTG_STATE_B_HOST;
190 /*
191 * Need to disable SOF interrupt immediately.
192 * When switching from device to host, the PCD
193 * interrupt handler won't handle the interrupt
194 * if host mode is already set. The HCD
195 * interrupt handler won't get called if the
196 * HCD state is HALT. This means that the
197 * interrupt does not get handled and Linux
198 * complains loudly.
199 */
200 gintmsk = dwc2_readl(hsotg, GINTMSK);
201 gintmsk &= ~GINTSTS_SOF;
202 dwc2_writel(hsotg, gintmsk, GINTMSK);
203
204 /*
205 * Call callback function with spin lock
206 * released
207 */
208 spin_unlock(&hsotg->lock);
209
210 /* Initialize the Core for Host mode */
211 dwc2_hcd_start(hsotg);
212 spin_lock(&hsotg->lock);
213 hsotg->op_state = OTG_STATE_B_HOST;
214 }
215 } else {
216 gotgctl = dwc2_readl(hsotg, GOTGCTL);
217 gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN);
218 dwc2_writel(hsotg, gotgctl, GOTGCTL);
219 dev_dbg(hsotg->dev, "HNP Failed\n");
220 dev_err(hsotg->dev,
221 "Device Not Connected/Responding\n");
222 }
223 }
224
225 if (gotgint & GOTGINT_HST_NEG_DET) {
226 /*
227 * The disconnect interrupt is set at the same time as
228 * Host Negotiation Detected. During the mode switch all
229 * interrupts are cleared so the disconnect interrupt
230 * handler will not get executed.
231 */
232 dev_dbg(hsotg->dev,
233 " ++OTG Interrupt: Host Negotiation Detected++ (%s)\n",
234 (dwc2_is_host_mode(hsotg) ? "Host" : "Device"));
235 if (dwc2_is_device_mode(hsotg)) {
236 dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n",
237 hsotg->op_state);
238 spin_unlock(&hsotg->lock);
239 dwc2_hcd_disconnect(hsotg, false);
240 spin_lock(&hsotg->lock);
241 hsotg->op_state = OTG_STATE_A_PERIPHERAL;
242 } else {
243 /* Need to disable SOF interrupt immediately */
244 gintmsk = dwc2_readl(hsotg, GINTMSK);
245 gintmsk &= ~GINTSTS_SOF;
246 dwc2_writel(hsotg, gintmsk, GINTMSK);
247 spin_unlock(&hsotg->lock);
248 dwc2_hcd_start(hsotg);
249 spin_lock(&hsotg->lock);
250 hsotg->op_state = OTG_STATE_A_HOST;
251 }
252 }
253
254 if (gotgint & GOTGINT_A_DEV_TOUT_CHG)
255 dev_dbg(hsotg->dev,
256 " ++OTG Interrupt: A-Device Timeout Change++\n");
257 if (gotgint & GOTGINT_DBNCE_DONE)
258 dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n");
259
260 /* Clear GOTGINT */
261 dwc2_writel(hsotg, gotgint, GOTGINT);
262}
263
264/**
265 * dwc2_handle_conn_id_status_change_intr() - Handles the Connector ID Status
266 * Change Interrupt
267 *
268 * @hsotg: Programming view of DWC_otg controller
269 *
270 * Reads the OTG Interrupt Register (GOTCTL) to determine whether this is a
271 * Device to Host Mode transition or a Host to Device Mode transition. This only
272 * occurs when the cable is connected/removed from the PHY connector.
273 */
274static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg)
275{
276 u32 gintmsk;
277
278 /* Clear interrupt */
279 dwc2_writel(hsotg, GINTSTS_CONIDSTSCHNG, GINTSTS);
280
281 /* Need to disable SOF interrupt immediately */
282 gintmsk = dwc2_readl(hsotg, GINTMSK);
283 gintmsk &= ~GINTSTS_SOF;
284 dwc2_writel(hsotg, gintmsk, GINTMSK);
285
286 dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++ (%s)\n",
287 dwc2_is_host_mode(hsotg) ? "Host" : "Device");
288
289 /*
290 * Need to schedule a work, as there are possible DELAY function calls.
291 */
292 if (hsotg->wq_otg)
293 queue_work(hsotg->wq_otg, &hsotg->wf_otg);
294}
295
296/**
297 * dwc2_handle_session_req_intr() - This interrupt indicates that a device is
298 * initiating the Session Request Protocol to request the host to turn on bus
299 * power so a new session can begin
300 *
301 * @hsotg: Programming view of DWC_otg controller
302 *
303 * This handler responds by turning on bus power. If the DWC_otg controller is
304 * in low power mode, this handler brings the controller out of low power mode
305 * before turning on bus power.
306 */
307static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
308{
309 int ret;
310 u32 hprt0;
311
312 /* Clear interrupt */
313 dwc2_writel(hsotg, GINTSTS_SESSREQINT, GINTSTS);
314
315 dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n",
316 hsotg->lx_state);
317
318 if (dwc2_is_device_mode(hsotg)) {
319 if (hsotg->lx_state == DWC2_L2) {
320 if (hsotg->in_ppd) {
321 ret = dwc2_exit_partial_power_down(hsotg, 0,
322 true);
323 if (ret)
324 dev_err(hsotg->dev,
325 "exit power_down failed\n");
326 }
327
328 /* Exit gadget mode clock gating. */
329 if (hsotg->params.power_down ==
330 DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
331 dwc2_gadget_exit_clock_gating(hsotg, 0);
332 }
333
334 /*
335 * Report disconnect if there is any previous session
336 * established
337 */
338 dwc2_hsotg_disconnect(hsotg);
339 } else {
340 /* Turn on the port power bit. */
341 hprt0 = dwc2_read_hprt0(hsotg);
342 hprt0 |= HPRT0_PWR;
343 dwc2_writel(hsotg, hprt0, HPRT0);
344 /* Connect hcd after port power is set. */
345 dwc2_hcd_connect(hsotg);
346 }
347}
348
349/**
350 * dwc2_wakeup_from_lpm_l1 - Exit the device from LPM L1 state
351 *
352 * @hsotg: Programming view of DWC_otg controller
353 *
354 */
355static void dwc2_wakeup_from_lpm_l1(struct dwc2_hsotg *hsotg)
356{
357 u32 glpmcfg;
358 u32 i = 0;
359
360 if (hsotg->lx_state != DWC2_L1) {
361 dev_err(hsotg->dev, "Core isn't in DWC2_L1 state\n");
362 return;
363 }
364
365 glpmcfg = dwc2_readl(hsotg, GLPMCFG);
366 if (dwc2_is_device_mode(hsotg)) {
367 dev_dbg(hsotg->dev, "Exit from L1 state\n");
368 glpmcfg &= ~GLPMCFG_ENBLSLPM;
369 glpmcfg &= ~GLPMCFG_HIRD_THRES_EN;
370 dwc2_writel(hsotg, glpmcfg, GLPMCFG);
371
372 do {
373 glpmcfg = dwc2_readl(hsotg, GLPMCFG);
374
375 if (!(glpmcfg & (GLPMCFG_COREL1RES_MASK |
376 GLPMCFG_L1RESUMEOK | GLPMCFG_SLPSTS)))
377 break;
378
379 udelay(1);
380 } while (++i < 200);
381
382 if (i == 200) {
383 dev_err(hsotg->dev, "Failed to exit L1 sleep state in 200us.\n");
384 return;
385 }
386 dwc2_gadget_init_lpm(hsotg);
387 } else {
388 /* TODO */
389 dev_err(hsotg->dev, "Host side LPM is not supported.\n");
390 return;
391 }
392
393 /* Change to L0 state */
394 hsotg->lx_state = DWC2_L0;
395
396 /* Inform gadget to exit from L1 */
397 call_gadget(hsotg, resume);
398}
399
400/*
401 * This interrupt indicates that the DWC_otg controller has detected a
402 * resume or remote wakeup sequence. If the DWC_otg controller is in
403 * low power mode, the handler must brings the controller out of low
404 * power mode. The controller automatically begins resume signaling.
405 * The handler schedules a time to stop resume signaling.
406 */
407static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
408{
409 int ret;
410
411 /* Clear interrupt */
412 dwc2_writel(hsotg, GINTSTS_WKUPINT, GINTSTS);
413
414 dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n");
415 dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state);
416
417 if (hsotg->lx_state == DWC2_L1) {
418 dwc2_wakeup_from_lpm_l1(hsotg);
419 return;
420 }
421
422 if (dwc2_is_device_mode(hsotg)) {
423 dev_dbg(hsotg->dev, "DSTS=0x%0x\n",
424 dwc2_readl(hsotg, DSTS));
425 if (hsotg->lx_state == DWC2_L2) {
426 if (hsotg->in_ppd) {
427 u32 dctl = dwc2_readl(hsotg, DCTL);
428 /* Clear Remote Wakeup Signaling */
429 dctl &= ~DCTL_RMTWKUPSIG;
430 dwc2_writel(hsotg, dctl, DCTL);
431 ret = dwc2_exit_partial_power_down(hsotg, 1,
432 true);
433 if (ret)
434 dev_err(hsotg->dev,
435 "exit partial_power_down failed\n");
436 call_gadget(hsotg, resume);
437 }
438
439 /* Exit gadget mode clock gating. */
440 if (hsotg->params.power_down ==
441 DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
442 dwc2_gadget_exit_clock_gating(hsotg, 0);
443 } else {
444 /* Change to L0 state */
445 hsotg->lx_state = DWC2_L0;
446 }
447 } else {
448 if (hsotg->lx_state == DWC2_L2) {
449 if (hsotg->in_ppd) {
450 ret = dwc2_exit_partial_power_down(hsotg, 1,
451 true);
452 if (ret)
453 dev_err(hsotg->dev,
454 "exit partial_power_down failed\n");
455 }
456
457 if (hsotg->params.power_down ==
458 DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
459 dwc2_host_exit_clock_gating(hsotg, 1);
460
461 /*
462 * If we've got this quirk then the PHY is stuck upon
463 * wakeup. Assert reset. This will propagate out and
464 * eventually we'll re-enumerate the device. Not great
465 * but the best we can do. We can't call phy_reset()
466 * at interrupt time but there's no hurry, so we'll
467 * schedule it for later.
468 */
469 if (hsotg->reset_phy_on_wake)
470 dwc2_host_schedule_phy_reset(hsotg);
471
472 mod_timer(&hsotg->wkp_timer,
473 jiffies + msecs_to_jiffies(71));
474 } else {
475 /* Change to L0 state */
476 hsotg->lx_state = DWC2_L0;
477 }
478 }
479}
480
481/*
482 * This interrupt indicates that a device has been disconnected from the
483 * root port
484 */
485static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg)
486{
487 dwc2_writel(hsotg, GINTSTS_DISCONNINT, GINTSTS);
488
489 dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n",
490 dwc2_is_host_mode(hsotg) ? "Host" : "Device",
491 dwc2_op_state_str(hsotg));
492
493 if (hsotg->op_state == OTG_STATE_A_HOST)
494 dwc2_hcd_disconnect(hsotg, false);
495}
496
497/*
498 * This interrupt indicates that SUSPEND state has been detected on the USB.
499 *
500 * For HNP the USB Suspend interrupt signals the change from "a_peripheral"
501 * to "a_host".
502 *
503 * When power management is enabled the core will be put in low power mode.
504 */
505static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg)
506{
507 u32 dsts;
508 int ret;
509
510 /* Clear interrupt */
511 dwc2_writel(hsotg, GINTSTS_USBSUSP, GINTSTS);
512
513 dev_dbg(hsotg->dev, "USB SUSPEND\n");
514
515 if (dwc2_is_device_mode(hsotg)) {
516 /*
517 * Check the Device status register to determine if the Suspend
518 * state is active
519 */
520 dsts = dwc2_readl(hsotg, DSTS);
521 dev_dbg(hsotg->dev, "%s: DSTS=0x%0x\n", __func__, dsts);
522 dev_dbg(hsotg->dev,
523 "DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d HWCFG4.Hibernation=%d\n",
524 !!(dsts & DSTS_SUSPSTS),
525 hsotg->hw_params.power_optimized,
526 hsotg->hw_params.hibernation);
527
528 /* Ignore suspend request before enumeration */
529 if (!dwc2_is_device_connected(hsotg)) {
530 dev_dbg(hsotg->dev,
531 "ignore suspend request before enumeration\n");
532 return;
533 }
534 if (dsts & DSTS_SUSPSTS) {
535 switch (hsotg->params.power_down) {
536 case DWC2_POWER_DOWN_PARAM_PARTIAL:
537 ret = dwc2_enter_partial_power_down(hsotg);
538 if (ret)
539 dev_err(hsotg->dev,
540 "enter partial_power_down failed\n");
541
542 udelay(100);
543
544 /* Ask phy to be suspended */
545 if (!IS_ERR_OR_NULL(hsotg->uphy))
546 usb_phy_set_suspend(hsotg->uphy, true);
547 break;
548 case DWC2_POWER_DOWN_PARAM_HIBERNATION:
549 ret = dwc2_enter_hibernation(hsotg, 0);
550 if (ret)
551 dev_err(hsotg->dev,
552 "enter hibernation failed\n");
553 break;
554 case DWC2_POWER_DOWN_PARAM_NONE:
555 /*
556 * If neither hibernation nor partial power down are supported,
557 * clock gating is used to save power.
558 */
559 if (!hsotg->params.no_clock_gating)
560 dwc2_gadget_enter_clock_gating(hsotg);
561 }
562
563 /*
564 * Change to L2 (suspend) state before releasing
565 * spinlock
566 */
567 hsotg->lx_state = DWC2_L2;
568
569 /* Call gadget suspend callback */
570 call_gadget(hsotg, suspend);
571 }
572 } else {
573 if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) {
574 dev_dbg(hsotg->dev, "a_peripheral->a_host\n");
575
576 /* Change to L2 (suspend) state */
577 hsotg->lx_state = DWC2_L2;
578 /* Clear the a_peripheral flag, back to a_host */
579 spin_unlock(&hsotg->lock);
580 dwc2_hcd_start(hsotg);
581 spin_lock(&hsotg->lock);
582 hsotg->op_state = OTG_STATE_A_HOST;
583 }
584 }
585}
586
587/**
588 * dwc2_handle_lpm_intr - GINTSTS_LPMTRANRCVD Interrupt handler
589 *
590 * @hsotg: Programming view of DWC_otg controller
591 *
592 */
593static void dwc2_handle_lpm_intr(struct dwc2_hsotg *hsotg)
594{
595 u32 glpmcfg;
596 u32 pcgcctl;
597 u32 hird;
598 u32 hird_thres;
599 u32 hird_thres_en;
600 u32 enslpm;
601
602 /* Clear interrupt */
603 dwc2_writel(hsotg, GINTSTS_LPMTRANRCVD, GINTSTS);
604
605 glpmcfg = dwc2_readl(hsotg, GLPMCFG);
606
607 if (!(glpmcfg & GLPMCFG_LPMCAP)) {
608 dev_err(hsotg->dev, "Unexpected LPM interrupt\n");
609 return;
610 }
611
612 hird = (glpmcfg & GLPMCFG_HIRD_MASK) >> GLPMCFG_HIRD_SHIFT;
613 hird_thres = (glpmcfg & GLPMCFG_HIRD_THRES_MASK &
614 ~GLPMCFG_HIRD_THRES_EN) >> GLPMCFG_HIRD_THRES_SHIFT;
615 hird_thres_en = glpmcfg & GLPMCFG_HIRD_THRES_EN;
616 enslpm = glpmcfg & GLPMCFG_ENBLSLPM;
617
618 if (dwc2_is_device_mode(hsotg)) {
619 dev_dbg(hsotg->dev, "HIRD_THRES_EN = %d\n", hird_thres_en);
620
621 if (hird_thres_en && hird >= hird_thres) {
622 dev_dbg(hsotg->dev, "L1 with utmi_l1_suspend_n\n");
623 } else if (enslpm) {
624 dev_dbg(hsotg->dev, "L1 with utmi_sleep_n\n");
625 } else {
626 dev_dbg(hsotg->dev, "Entering Sleep with L1 Gating\n");
627
628 pcgcctl = dwc2_readl(hsotg, PCGCTL);
629 pcgcctl |= PCGCTL_ENBL_SLEEP_GATING;
630 dwc2_writel(hsotg, pcgcctl, PCGCTL);
631 }
632 /**
633 * Examine prt_sleep_sts after TL1TokenTetry period max (10 us)
634 */
635 udelay(10);
636
637 glpmcfg = dwc2_readl(hsotg, GLPMCFG);
638
639 if (glpmcfg & GLPMCFG_SLPSTS) {
640 /* Save the current state */
641 hsotg->lx_state = DWC2_L1;
642 dev_dbg(hsotg->dev,
643 "Core is in L1 sleep glpmcfg=%08x\n", glpmcfg);
644
645 /* Inform gadget that we are in L1 state */
646 call_gadget(hsotg, suspend);
647 }
648 }
649}
650
651#define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \
652 GINTSTS_CONIDSTSCHNG | GINTSTS_OTGINT | \
653 GINTSTS_MODEMIS | GINTSTS_DISCONNINT | \
654 GINTSTS_USBSUSP | GINTSTS_PRTINT | \
655 GINTSTS_LPMTRANRCVD)
656
657/*
658 * This function returns the Core Interrupt register
659 */
660static u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg)
661{
662 u32 gintsts;
663 u32 gintmsk;
664 u32 gahbcfg;
665 u32 gintmsk_common = GINTMSK_COMMON;
666
667 gintsts = dwc2_readl(hsotg, GINTSTS);
668 gintmsk = dwc2_readl(hsotg, GINTMSK);
669 gahbcfg = dwc2_readl(hsotg, GAHBCFG);
670
671 /* If any common interrupts set */
672 if (gintsts & gintmsk_common)
673 dev_dbg(hsotg->dev, "gintsts=%08x gintmsk=%08x\n",
674 gintsts, gintmsk);
675
676 if (gahbcfg & GAHBCFG_GLBL_INTR_EN)
677 return gintsts & gintmsk & gintmsk_common;
678 else
679 return 0;
680}
681
682/**
683 * dwc_handle_gpwrdn_disc_det() - Handles the gpwrdn disconnect detect.
684 * Exits hibernation without restoring registers.
685 *
686 * @hsotg: Programming view of DWC_otg controller
687 * @gpwrdn: GPWRDN register
688 */
689static inline void dwc_handle_gpwrdn_disc_det(struct dwc2_hsotg *hsotg,
690 u32 gpwrdn)
691{
692 u32 gpwrdn_tmp;
693
694 /* Switch-on voltage to the core */
695 gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
696 gpwrdn_tmp &= ~GPWRDN_PWRDNSWTCH;
697 dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
698 udelay(5);
699
700 /* Reset core */
701 gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
702 gpwrdn_tmp &= ~GPWRDN_PWRDNRSTN;
703 dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
704 udelay(5);
705
706 /* Disable Power Down Clamp */
707 gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
708 gpwrdn_tmp &= ~GPWRDN_PWRDNCLMP;
709 dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
710 udelay(5);
711
712 /* Deassert reset core */
713 gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
714 gpwrdn_tmp |= GPWRDN_PWRDNRSTN;
715 dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
716 udelay(5);
717
718 /* Disable PMU interrupt */
719 gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
720 gpwrdn_tmp &= ~GPWRDN_PMUINTSEL;
721 dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
722
723 /* De-assert Wakeup Logic */
724 gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
725 gpwrdn_tmp &= ~GPWRDN_PMUACTV;
726 dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
727
728 hsotg->hibernated = 0;
729 hsotg->bus_suspended = 0;
730
731 if (gpwrdn & GPWRDN_IDSTS) {
732 hsotg->op_state = OTG_STATE_B_PERIPHERAL;
733 dwc2_core_init(hsotg, false);
734 dwc2_enable_global_interrupts(hsotg);
735 dwc2_hsotg_core_init_disconnected(hsotg, false);
736 dwc2_hsotg_core_connect(hsotg);
737 } else {
738 hsotg->op_state = OTG_STATE_A_HOST;
739
740 /* Initialize the Core for Host mode */
741 dwc2_core_init(hsotg, false);
742 dwc2_enable_global_interrupts(hsotg);
743 dwc2_hcd_start(hsotg);
744 }
745}
746
747/*
748 * GPWRDN interrupt handler.
749 *
750 * The GPWRDN interrupts are those that occur in both Host and
751 * Device mode while core is in hibernated state.
752 */
753static int dwc2_handle_gpwrdn_intr(struct dwc2_hsotg *hsotg)
754{
755 u32 gpwrdn;
756 int linestate;
757 int ret = 0;
758
759 gpwrdn = dwc2_readl(hsotg, GPWRDN);
760 /* clear all interrupt */
761 dwc2_writel(hsotg, gpwrdn, GPWRDN);
762 linestate = (gpwrdn & GPWRDN_LINESTATE_MASK) >> GPWRDN_LINESTATE_SHIFT;
763 dev_dbg(hsotg->dev,
764 "%s: dwc2_handle_gpwrdwn_intr called gpwrdn= %08x\n", __func__,
765 gpwrdn);
766
767 if ((gpwrdn & GPWRDN_DISCONN_DET) &&
768 (gpwrdn & GPWRDN_DISCONN_DET_MSK) && !linestate) {
769 dev_dbg(hsotg->dev, "%s: GPWRDN_DISCONN_DET\n", __func__);
770 /*
771 * Call disconnect detect function to exit from
772 * hibernation
773 */
774 dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn);
775 } else if ((gpwrdn & GPWRDN_LNSTSCHG) &&
776 (gpwrdn & GPWRDN_LNSTSCHG_MSK) && linestate) {
777 dev_dbg(hsotg->dev, "%s: GPWRDN_LNSTSCHG\n", __func__);
778 if (hsotg->hw_params.hibernation &&
779 hsotg->hibernated) {
780 if (gpwrdn & GPWRDN_IDSTS) {
781 ret = dwc2_exit_hibernation(hsotg, 0, 0, 0);
782 if (ret)
783 dev_err(hsotg->dev,
784 "exit hibernation failed.\n");
785 call_gadget(hsotg, resume);
786 } else {
787 ret = dwc2_exit_hibernation(hsotg, 1, 0, 1);
788 if (ret)
789 dev_err(hsotg->dev,
790 "exit hibernation failed.\n");
791 }
792 }
793 } else if ((gpwrdn & GPWRDN_RST_DET) &&
794 (gpwrdn & GPWRDN_RST_DET_MSK)) {
795 dev_dbg(hsotg->dev, "%s: GPWRDN_RST_DET\n", __func__);
796 if (!linestate) {
797 ret = dwc2_exit_hibernation(hsotg, 0, 1, 0);
798 if (ret)
799 dev_err(hsotg->dev,
800 "exit hibernation failed.\n");
801 }
802 } else if ((gpwrdn & GPWRDN_STS_CHGINT) &&
803 (gpwrdn & GPWRDN_STS_CHGINT_MSK)) {
804 dev_dbg(hsotg->dev, "%s: GPWRDN_STS_CHGINT\n", __func__);
805 /*
806 * As GPWRDN_STS_CHGINT exit from hibernation flow is
807 * the same as in GPWRDN_DISCONN_DET flow. Call
808 * disconnect detect helper function to exit from
809 * hibernation.
810 */
811 dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn);
812 }
813
814 return ret;
815}
816
817/*
818 * Common interrupt handler
819 *
820 * The common interrupts are those that occur in both Host and Device mode.
821 * This handler handles the following interrupts:
822 * - Mode Mismatch Interrupt
823 * - OTG Interrupt
824 * - Connector ID Status Change Interrupt
825 * - Disconnect Interrupt
826 * - Session Request Interrupt
827 * - Resume / Remote Wakeup Detected Interrupt
828 * - Suspend Interrupt
829 */
830irqreturn_t dwc2_handle_common_intr(int irq, void *dev)
831{
832 struct dwc2_hsotg *hsotg = dev;
833 u32 gintsts;
834 irqreturn_t retval = IRQ_NONE;
835
836 spin_lock(&hsotg->lock);
837
838 if (!dwc2_is_controller_alive(hsotg)) {
839 dev_warn(hsotg->dev, "Controller is dead\n");
840 goto out;
841 }
842
843 /* Reading current frame number value in device or host modes. */
844 if (dwc2_is_device_mode(hsotg))
845 hsotg->frame_number = (dwc2_readl(hsotg, DSTS)
846 & DSTS_SOFFN_MASK) >> DSTS_SOFFN_SHIFT;
847 else
848 hsotg->frame_number = (dwc2_readl(hsotg, HFNUM)
849 & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT;
850
851 gintsts = dwc2_read_common_intr(hsotg);
852 if (gintsts & ~GINTSTS_PRTINT)
853 retval = IRQ_HANDLED;
854
855 /* In case of hibernated state gintsts must not work */
856 if (hsotg->hibernated) {
857 dwc2_handle_gpwrdn_intr(hsotg);
858 retval = IRQ_HANDLED;
859 goto out;
860 }
861
862 if (gintsts & GINTSTS_MODEMIS)
863 dwc2_handle_mode_mismatch_intr(hsotg);
864 if (gintsts & GINTSTS_OTGINT)
865 dwc2_handle_otg_intr(hsotg);
866 if (gintsts & GINTSTS_CONIDSTSCHNG)
867 dwc2_handle_conn_id_status_change_intr(hsotg);
868 if (gintsts & GINTSTS_DISCONNINT)
869 dwc2_handle_disconnect_intr(hsotg);
870 if (gintsts & GINTSTS_SESSREQINT)
871 dwc2_handle_session_req_intr(hsotg);
872 if (gintsts & GINTSTS_WKUPINT)
873 dwc2_handle_wakeup_detected_intr(hsotg);
874 if (gintsts & GINTSTS_USBSUSP)
875 dwc2_handle_usb_suspend_intr(hsotg);
876 if (gintsts & GINTSTS_LPMTRANRCVD)
877 dwc2_handle_lpm_intr(hsotg);
878
879 if (gintsts & GINTSTS_PRTINT) {
880 /*
881 * The port interrupt occurs while in device mode with HPRT0
882 * Port Enable/Disable
883 */
884 if (dwc2_is_device_mode(hsotg)) {
885 dev_dbg(hsotg->dev,
886 " --Port interrupt received in Device mode--\n");
887 dwc2_handle_usb_port_intr(hsotg);
888 retval = IRQ_HANDLED;
889 }
890 }
891
892out:
893 spin_unlock(&hsotg->lock);
894 return retval;
895}