Loading...
1// SPDX-License-Identifier: (GPL-2.0 OR MPL-1.1)
2/*======================================================================
3
4 A driver for PCMCIA serial devices
5
6 serial_cs.c 1.134 2002/05/04 05:48:53
7
8 The contents of this file are subject to the Mozilla Public
9 License Version 1.1 (the "License"); you may not use this file
10 except in compliance with the License. You may obtain a copy of
11 the License at http://www.mozilla.org/MPL/
12
13 Software distributed under the License is distributed on an "AS
14 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
15 implied. See the License for the specific language governing
16 rights and limitations under the License.
17
18 The initial developer of the original code is David A. Hinds
19 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
20 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
21
22 Alternatively, the contents of this file may be used under the
23 terms of the GNU General Public License version 2 (the "GPL"), in which
24 case the provisions of the GPL are applicable instead of the
25 above. If you wish to allow the use of your version of this file
26 only under the terms of the GPL and not to allow others to use
27 your version of this file under the MPL, indicate your decision
28 by deleting the provisions above and replace them with the notice
29 and other provisions required by the GPL. If you do not delete
30 the provisions above, a recipient may use your version of this
31 file under either the MPL or the GPL.
32
33======================================================================*/
34
35#include <linux/module.h>
36#include <linux/moduleparam.h>
37#include <linux/kernel.h>
38#include <linux/ptrace.h>
39#include <linux/slab.h>
40#include <linux/string.h>
41#include <linux/timer.h>
42#include <linux/serial_core.h>
43#include <linux/delay.h>
44#include <linux/major.h>
45#include <asm/io.h>
46
47#include <pcmcia/cistpl.h>
48#include <pcmcia/ciscode.h>
49#include <pcmcia/ds.h>
50#include <pcmcia/cisreg.h>
51
52#include "8250.h"
53
54
55/*====================================================================*/
56
57/* Parameters that can be set with 'insmod' */
58
59/* Enable the speaker? */
60static int do_sound = 1;
61/* Skip strict UART tests? */
62static int buggy_uart;
63
64module_param(do_sound, int, 0444);
65module_param(buggy_uart, int, 0444);
66
67/*====================================================================*/
68
69/* Table of multi-port card ID's */
70
71struct serial_quirk {
72 unsigned int manfid;
73 unsigned int prodid;
74 int multi; /* 1 = multifunction, > 1 = # ports */
75 void (*config)(struct pcmcia_device *);
76 void (*setup)(struct pcmcia_device *, struct uart_8250_port *);
77 void (*wakeup)(struct pcmcia_device *);
78 int (*post)(struct pcmcia_device *);
79};
80
81struct serial_info {
82 struct pcmcia_device *p_dev;
83 int ndev;
84 int multi;
85 int slave;
86 int manfid;
87 int prodid;
88 int c950ctrl;
89 int line[4];
90 const struct serial_quirk *quirk;
91};
92
93struct serial_cfg_mem {
94 tuple_t tuple;
95 cisparse_t parse;
96 u_char buf[256];
97};
98
99/*
100 * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6"
101 * manfid 0x0160, 0x0104
102 * This card appears to have a 14.7456MHz clock.
103 */
104/* Generic Modem: MD55x (GPRS/EDGE) have
105 * Elan VPU16551 UART with 14.7456MHz oscillator
106 * manfid 0x015D, 0x4C45
107 */
108static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_8250_port *uart)
109{
110 uart->port.uartclk = 14745600;
111}
112
113static int quirk_post_ibm(struct pcmcia_device *link)
114{
115 u8 val;
116 int ret;
117
118 ret = pcmcia_read_config_byte(link, 0x800, &val);
119 if (ret)
120 goto failed;
121
122 ret = pcmcia_write_config_byte(link, 0x800, val | 1);
123 if (ret)
124 goto failed;
125 return 0;
126
127 failed:
128 return -ENODEV;
129}
130
131/*
132 * Nokia cards are not really multiport cards. Shouldn't this
133 * be handled by setting the quirk entry .multi = 0 | 1 ?
134 */
135static void quirk_config_nokia(struct pcmcia_device *link)
136{
137 struct serial_info *info = link->priv;
138
139 if (info->multi > 1)
140 info->multi = 1;
141}
142
143static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
144{
145 struct serial_info *info = link->priv;
146
147 if (info->c950ctrl)
148 outb(12, info->c950ctrl + 1);
149}
150
151/* request_region? oxsemi branch does no request_region too... */
152/*
153 * This sequence is needed to properly initialize MC45 attached to OXCF950.
154 * I tried decreasing these msleep()s, but it worked properly (survived
155 * 1000 stop/start operations) with these timeouts (or bigger).
156 */
157static void quirk_wakeup_possio_gcc(struct pcmcia_device *link)
158{
159 struct serial_info *info = link->priv;
160 unsigned int ctrl = info->c950ctrl;
161
162 outb(0xA, ctrl + 1);
163 msleep(100);
164 outb(0xE, ctrl + 1);
165 msleep(300);
166 outb(0xC, ctrl + 1);
167 msleep(100);
168 outb(0xE, ctrl + 1);
169 msleep(200);
170 outb(0xF, ctrl + 1);
171 msleep(100);
172 outb(0xE, ctrl + 1);
173 msleep(100);
174 outb(0xC, ctrl + 1);
175}
176
177/*
178 * Socket Dual IO: this enables irq's for second port
179 */
180static void quirk_config_socket(struct pcmcia_device *link)
181{
182 struct serial_info *info = link->priv;
183
184 if (info->multi)
185 link->config_flags |= CONF_ENABLE_ESR;
186}
187
188static const struct serial_quirk quirks[] = {
189 {
190 .manfid = 0x0160,
191 .prodid = 0x0104,
192 .multi = -1,
193 .setup = quirk_setup_brainboxes_0104,
194 }, {
195 .manfid = 0x015D,
196 .prodid = 0x4C45,
197 .multi = -1,
198 .setup = quirk_setup_brainboxes_0104,
199 }, {
200 .manfid = MANFID_IBM,
201 .prodid = ~0,
202 .multi = -1,
203 .post = quirk_post_ibm,
204 }, {
205 .manfid = MANFID_INTEL,
206 .prodid = PRODID_INTEL_DUAL_RS232,
207 .multi = 2,
208 }, {
209 .manfid = MANFID_NATINST,
210 .prodid = PRODID_NATINST_QUAD_RS232,
211 .multi = 4,
212 }, {
213 .manfid = MANFID_NOKIA,
214 .prodid = ~0,
215 .multi = -1,
216 .config = quirk_config_nokia,
217 }, {
218 .manfid = MANFID_OMEGA,
219 .prodid = PRODID_OMEGA_QSP_100,
220 .multi = 4,
221 }, {
222 .manfid = MANFID_OXSEMI,
223 .prodid = ~0,
224 .multi = -1,
225 .wakeup = quirk_wakeup_oxsemi,
226 }, {
227 .manfid = MANFID_POSSIO,
228 .prodid = PRODID_POSSIO_GCC,
229 .multi = -1,
230 .wakeup = quirk_wakeup_possio_gcc,
231 }, {
232 .manfid = MANFID_QUATECH,
233 .prodid = PRODID_QUATECH_DUAL_RS232,
234 .multi = 2,
235 }, {
236 .manfid = MANFID_QUATECH,
237 .prodid = PRODID_QUATECH_DUAL_RS232_D1,
238 .multi = 2,
239 }, {
240 .manfid = MANFID_QUATECH,
241 .prodid = PRODID_QUATECH_DUAL_RS232_G,
242 .multi = 2,
243 }, {
244 .manfid = MANFID_QUATECH,
245 .prodid = PRODID_QUATECH_QUAD_RS232,
246 .multi = 4,
247 }, {
248 .manfid = MANFID_SOCKET,
249 .prodid = PRODID_SOCKET_DUAL_RS232,
250 .multi = 2,
251 .config = quirk_config_socket,
252 }, {
253 .manfid = MANFID_SOCKET,
254 .prodid = ~0,
255 .multi = -1,
256 .config = quirk_config_socket,
257 }
258};
259
260
261static int serial_config(struct pcmcia_device *link);
262
263
264static void serial_remove(struct pcmcia_device *link)
265{
266 struct serial_info *info = link->priv;
267 int i;
268
269 dev_dbg(&link->dev, "serial_release\n");
270
271 /*
272 * Recheck to see if the device is still configured.
273 */
274 for (i = 0; i < info->ndev; i++)
275 serial8250_unregister_port(info->line[i]);
276
277 if (!info->slave)
278 pcmcia_disable_device(link);
279}
280
281static int serial_suspend(struct pcmcia_device *link)
282{
283 struct serial_info *info = link->priv;
284 int i;
285
286 for (i = 0; i < info->ndev; i++)
287 serial8250_suspend_port(info->line[i]);
288
289 return 0;
290}
291
292static int serial_resume(struct pcmcia_device *link)
293{
294 struct serial_info *info = link->priv;
295 int i;
296
297 for (i = 0; i < info->ndev; i++)
298 serial8250_resume_port(info->line[i]);
299
300 if (info->quirk && info->quirk->wakeup)
301 info->quirk->wakeup(link);
302
303 return 0;
304}
305
306static int serial_probe(struct pcmcia_device *link)
307{
308 struct serial_info *info;
309
310 dev_dbg(&link->dev, "serial_attach()\n");
311
312 /* Create new serial device */
313 info = kzalloc(sizeof(*info), GFP_KERNEL);
314 if (!info)
315 return -ENOMEM;
316 info->p_dev = link;
317 link->priv = info;
318
319 link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
320 if (do_sound)
321 link->config_flags |= CONF_ENABLE_SPKR;
322
323 return serial_config(link);
324}
325
326static void serial_detach(struct pcmcia_device *link)
327{
328 struct serial_info *info = link->priv;
329
330 dev_dbg(&link->dev, "serial_detach\n");
331
332 /*
333 * Ensure that the ports have been released.
334 */
335 serial_remove(link);
336
337 /* free bits */
338 kfree(info);
339}
340
341/*====================================================================*/
342
343static int setup_serial(struct pcmcia_device *handle, struct serial_info *info,
344 unsigned int iobase, int irq)
345{
346 struct uart_8250_port uart;
347 int line;
348
349 memset(&uart, 0, sizeof(uart));
350 uart.port.iobase = iobase;
351 uart.port.irq = irq;
352 uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
353 uart.port.uartclk = 1843200;
354 uart.port.dev = &handle->dev;
355 if (buggy_uart)
356 uart.port.flags |= UPF_BUGGY_UART;
357
358 if (info->quirk && info->quirk->setup)
359 info->quirk->setup(handle, &uart);
360
361 line = serial8250_register_8250_port(&uart);
362 if (line < 0) {
363 pr_err("serial_cs: serial8250_register_8250_port() at 0x%04lx, irq %d failed\n",
364 (unsigned long)iobase, irq);
365 return -EINVAL;
366 }
367
368 info->line[info->ndev] = line;
369 info->ndev++;
370
371 return 0;
372}
373
374/*====================================================================*/
375
376static int pfc_config(struct pcmcia_device *p_dev)
377{
378 unsigned int port = 0;
379 struct serial_info *info = p_dev->priv;
380
381 if ((p_dev->resource[1]->end != 0) &&
382 (resource_size(p_dev->resource[1]) == 8)) {
383 port = p_dev->resource[1]->start;
384 info->slave = 1;
385 } else if ((info->manfid == MANFID_OSITECH) &&
386 (resource_size(p_dev->resource[0]) == 0x40)) {
387 port = p_dev->resource[0]->start + 0x28;
388 info->slave = 1;
389 }
390 if (info->slave)
391 return setup_serial(p_dev, info, port, p_dev->irq);
392
393 dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
394 return -ENODEV;
395}
396
397static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data)
398{
399 static const int size_table[2] = { 8, 16 };
400 int *try = priv_data;
401
402 if (p_dev->resource[0]->start == 0)
403 return -ENODEV;
404
405 if ((*try & 0x1) == 0)
406 p_dev->io_lines = 16;
407
408 if (p_dev->resource[0]->end != size_table[(*try >> 1)])
409 return -ENODEV;
410
411 p_dev->resource[0]->end = 8;
412 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
413 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
414
415 return pcmcia_request_io(p_dev);
416}
417
418static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
419 void *priv_data)
420{
421 static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
422 int j;
423
424 if (p_dev->io_lines > 3)
425 return -ENODEV;
426
427 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
428 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
429 p_dev->resource[0]->end = 8;
430
431 for (j = 0; j < 5; j++) {
432 p_dev->resource[0]->start = base[j];
433 p_dev->io_lines = base[j] ? 16 : 3;
434 if (!pcmcia_request_io(p_dev))
435 return 0;
436 }
437 return -ENODEV;
438}
439
440static int simple_config(struct pcmcia_device *link)
441{
442 struct serial_info *info = link->priv;
443 int i = -ENODEV, try;
444
445 /*
446 * First pass: look for a config entry that looks normal.
447 * Two tries: without IO aliases, then with aliases.
448 */
449 link->config_flags |= CONF_AUTO_SET_VPP;
450 for (try = 0; try < 4; try++)
451 if (!pcmcia_loop_config(link, simple_config_check, &try))
452 goto found_port;
453
454 /*
455 * Second pass: try to find an entry that isn't picky about
456 * its base address, then try to grab any standard serial port
457 * address, and finally try to get any free port.
458 */
459 if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
460 goto found_port;
461
462 dev_warn(&link->dev, "no usable port range found, giving up\n");
463 return -1;
464
465found_port:
466 if (info->multi && (info->manfid == MANFID_3COM))
467 link->config_index &= ~(0x08);
468
469 /*
470 * Apply any configuration quirks.
471 */
472 if (info->quirk && info->quirk->config)
473 info->quirk->config(link);
474
475 i = pcmcia_enable_device(link);
476 if (i != 0)
477 return -1;
478 return setup_serial(link, info, link->resource[0]->start, link->irq);
479}
480
481static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data)
482{
483 int *multi = priv_data;
484
485 if (p_dev->resource[1]->end)
486 return -EINVAL;
487
488 /*
489 * The quad port cards have bad CIS's, so just look for a
490 * window larger than 8 ports and assume it will be right.
491 */
492 if (p_dev->resource[0]->end <= 8)
493 return -EINVAL;
494
495 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
496 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
497 p_dev->resource[0]->end = *multi * 8;
498
499 if (pcmcia_request_io(p_dev))
500 return -ENODEV;
501 return 0;
502}
503
504static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
505 void *priv_data)
506{
507 int *base2 = priv_data;
508
509 if (!p_dev->resource[0]->end || !p_dev->resource[1]->end ||
510 p_dev->resource[0]->start + 8 != p_dev->resource[1]->start)
511 return -ENODEV;
512
513 p_dev->resource[0]->end = p_dev->resource[1]->end = 8;
514 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
515 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
516
517 if (pcmcia_request_io(p_dev))
518 return -ENODEV;
519
520 *base2 = p_dev->resource[0]->start + 8;
521 return 0;
522}
523
524static int multi_config(struct pcmcia_device *link)
525{
526 struct serial_info *info = link->priv;
527 int i, base2 = 0;
528
529 /* First, look for a generic full-sized window */
530 if (!pcmcia_loop_config(link, multi_config_check, &info->multi))
531 base2 = link->resource[0]->start + 8;
532 else {
533 /* If that didn't work, look for two windows */
534 info->multi = 2;
535 if (pcmcia_loop_config(link, multi_config_check_notpicky,
536 &base2)) {
537 dev_warn(&link->dev,
538 "no usable port range found, giving up\n");
539 return -ENODEV;
540 }
541 }
542
543 if (!link->irq)
544 dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
545
546 /*
547 * Apply any configuration quirks.
548 */
549 if (info->quirk && info->quirk->config)
550 info->quirk->config(link);
551
552 i = pcmcia_enable_device(link);
553 if (i != 0)
554 return -ENODEV;
555
556 /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
557 * 8 registers are for the UART, the others are extra registers.
558 * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
559 */
560 if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
561 info->prodid == PRODID_POSSIO_GCC)) {
562 int err;
563
564 if (link->config_index == 1 ||
565 link->config_index == 3) {
566 err = setup_serial(link, info, base2,
567 link->irq);
568 base2 = link->resource[0]->start;
569 } else {
570 err = setup_serial(link, info, link->resource[0]->start,
571 link->irq);
572 }
573 info->c950ctrl = base2;
574
575 /*
576 * FIXME: We really should wake up the port prior to
577 * handing it over to the serial layer.
578 */
579 if (info->quirk && info->quirk->wakeup)
580 info->quirk->wakeup(link);
581
582 return 0;
583 }
584
585 setup_serial(link, info, link->resource[0]->start, link->irq);
586 for (i = 0; i < info->multi - 1; i++)
587 setup_serial(link, info, base2 + (8 * i),
588 link->irq);
589 return 0;
590}
591
592static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data)
593{
594 struct serial_info *info = p_dev->priv;
595
596 if (!p_dev->resource[0]->end)
597 return -EINVAL;
598
599 if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0))
600 info->multi = p_dev->resource[0]->end >> 3;
601
602 if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8)
603 && (p_dev->resource[1]->end == 8))
604 info->multi = 2;
605
606 return 0; /* break */
607}
608
609
610static int serial_config(struct pcmcia_device *link)
611{
612 struct serial_info *info = link->priv;
613 int i;
614
615 dev_dbg(&link->dev, "serial_config\n");
616
617 /* Is this a compliant multifunction card? */
618 info->multi = (link->socket->functions > 1);
619
620 /* Is this a multiport card? */
621 info->manfid = link->manf_id;
622 info->prodid = link->card_id;
623
624 for (i = 0; i < ARRAY_SIZE(quirks); i++)
625 if ((quirks[i].manfid == ~0 ||
626 quirks[i].manfid == info->manfid) &&
627 (quirks[i].prodid == ~0 ||
628 quirks[i].prodid == info->prodid)) {
629 info->quirk = &quirks[i];
630 break;
631 }
632
633 /*
634 * Another check for dual-serial cards: look for either serial or
635 * multifunction cards that ask for appropriate IO port ranges.
636 */
637 if ((info->multi == 0) &&
638 (link->has_func_id) &&
639 (link->socket->pcmcia_pfc == 0) &&
640 ((link->func_id == CISTPL_FUNCID_MULTI) ||
641 (link->func_id == CISTPL_FUNCID_SERIAL))) {
642 if (pcmcia_loop_config(link, serial_check_for_multi, info))
643 goto failed;
644 }
645
646 /*
647 * Apply any multi-port quirk.
648 */
649 if (info->quirk && info->quirk->multi != -1)
650 info->multi = info->quirk->multi;
651
652 dev_info(&link->dev,
653 "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
654 link->manf_id, link->card_id,
655 link->socket->pcmcia_pfc, info->multi, info->quirk);
656 if (link->socket->pcmcia_pfc)
657 i = pfc_config(link);
658 else if (info->multi > 1)
659 i = multi_config(link);
660 else
661 i = simple_config(link);
662
663 if (i || info->ndev == 0)
664 goto failed;
665
666 /*
667 * Apply any post-init quirk. FIXME: This should really happen
668 * before we register the port, since it might already be in use.
669 */
670 if (info->quirk && info->quirk->post)
671 if (info->quirk->post(link))
672 goto failed;
673
674 return 0;
675
676failed:
677 dev_warn(&link->dev, "failed to initialize\n");
678 serial_remove(link);
679 return -ENODEV;
680}
681
682static const struct pcmcia_device_id serial_ids[] = {
683 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
684 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
685 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
686 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
687 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
688 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
689 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
690 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
691 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
692 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
693 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
694 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
695 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
696 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
697 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
698 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
699 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
700 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
701 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
702 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
703 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
704 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
705 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
706 PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
707 PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
708 PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
709 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
710 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
711 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
712 PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
713 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
714 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
715 PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001", 0x18df0ba0, 0x831b1064),
716 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
717 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
718 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
719 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
720 PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
721 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
722 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
723 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
724 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05),
725 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
726 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
727 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
728 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
729 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
730 PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
731 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
732 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
733 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
734 PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
735 PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
736 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
737 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
738 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
739 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
740 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */
741 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */
742 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */
743 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
744 PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */
745 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
746 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
747 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
748 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
749 PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
750 PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */
751 PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */
752 PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */
753 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
754 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
755 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
756 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
757 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
758 PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */
759 PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */
760 PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
761 PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
762 PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
763 PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
764 PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
765 PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
766 PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
767 PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
768 PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
769 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
770 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
771 PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
772 PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
773 PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b),
774 PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
775 PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
776 PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447),
777 PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
778 PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
779 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
780 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
781 PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
782 PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41),
783 PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
784 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
785 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
786 PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38),
787 PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292),
788 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
789 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
790 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
791 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
792 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
793 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
794 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
795 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
796 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
797 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
798 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
799 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
800 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
801 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */
802 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
803 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
804 PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
805 PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
806 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
807 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
808 PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
809 PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
810 PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
811 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100 1.00.", 0x19ca78af, 0xf964f42b),
812 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100", 0x19ca78af, 0x71d98e83),
813 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232 1.00.", 0x19ca78af, 0x69fb7490),
814 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232", 0x19ca78af, 0xb6bc0235),
815 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232", 0x63f2e0bd, 0xb9e175d3),
816 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232-5", 0x63f2e0bd, 0xfce33442),
817 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232", 0x3beb8cf2, 0x171e7190),
818 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232-5", 0x3beb8cf2, 0x20da4262),
819 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF428", 0x3beb8cf2, 0xea5dd57d),
820 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF500", 0x3beb8cf2, 0xd77255fa),
821 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: IC232", 0x3beb8cf2, 0x6a709903),
822 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: SL232", 0x3beb8cf2, 0x18430676),
823 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: XL232", 0x3beb8cf2, 0x6f933767),
824 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7),
825 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41),
826 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029),
827 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
828 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial+Parallel Port: SP230", 0x3beb8cf2, 0xdb9e58bc),
829 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7),
830 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41),
831 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029),
832 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
833 PCMCIA_MFC_DEVICE_PROD_ID12(2, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
834 PCMCIA_MFC_DEVICE_PROD_ID12(3, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
835 PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
836 /* too generic */
837 /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
838 /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
839 PCMCIA_DEVICE_FUNC_ID(2),
840 PCMCIA_DEVICE_NULL,
841};
842MODULE_DEVICE_TABLE(pcmcia, serial_ids);
843
844MODULE_FIRMWARE("cis/PCMLM28.cis");
845MODULE_FIRMWARE("cis/DP83903.cis");
846MODULE_FIRMWARE("cis/3CCFEM556.cis");
847MODULE_FIRMWARE("cis/3CXEM556.cis");
848MODULE_FIRMWARE("cis/SW_8xx_SER.cis");
849MODULE_FIRMWARE("cis/SW_7xx_SER.cis");
850MODULE_FIRMWARE("cis/SW_555_SER.cis");
851MODULE_FIRMWARE("cis/MT5634ZLX.cis");
852MODULE_FIRMWARE("cis/COMpad2.cis");
853MODULE_FIRMWARE("cis/COMpad4.cis");
854MODULE_FIRMWARE("cis/RS-COM-2P.cis");
855
856static struct pcmcia_driver serial_cs_driver = {
857 .owner = THIS_MODULE,
858 .name = "serial_cs",
859 .probe = serial_probe,
860 .remove = serial_detach,
861 .id_table = serial_ids,
862 .suspend = serial_suspend,
863 .resume = serial_resume,
864};
865module_pcmcia_driver(serial_cs_driver);
866
867MODULE_LICENSE("GPL");
1/*======================================================================
2
3 A driver for PCMCIA serial devices
4
5 serial_cs.c 1.134 2002/05/04 05:48:53
6
7 The contents of this file are subject to the Mozilla Public
8 License Version 1.1 (the "License"); you may not use this file
9 except in compliance with the License. You may obtain a copy of
10 the License at http://www.mozilla.org/MPL/
11
12 Software distributed under the License is distributed on an "AS
13 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 implied. See the License for the specific language governing
15 rights and limitations under the License.
16
17 The initial developer of the original code is David A. Hinds
18 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
20
21 Alternatively, the contents of this file may be used under the
22 terms of the GNU General Public License version 2 (the "GPL"), in which
23 case the provisions of the GPL are applicable instead of the
24 above. If you wish to allow the use of your version of this file
25 only under the terms of the GPL and not to allow others to use
26 your version of this file under the MPL, indicate your decision
27 by deleting the provisions above and replace them with the notice
28 and other provisions required by the GPL. If you do not delete
29 the provisions above, a recipient may use your version of this
30 file under either the MPL or the GPL.
31
32======================================================================*/
33
34#include <linux/module.h>
35#include <linux/moduleparam.h>
36#include <linux/kernel.h>
37#include <linux/ptrace.h>
38#include <linux/slab.h>
39#include <linux/string.h>
40#include <linux/timer.h>
41#include <linux/serial_core.h>
42#include <linux/delay.h>
43#include <linux/major.h>
44#include <asm/io.h>
45
46#include <pcmcia/cistpl.h>
47#include <pcmcia/ciscode.h>
48#include <pcmcia/ds.h>
49#include <pcmcia/cisreg.h>
50
51#include "8250.h"
52
53
54/*====================================================================*/
55
56/* Parameters that can be set with 'insmod' */
57
58/* Enable the speaker? */
59static int do_sound = 1;
60/* Skip strict UART tests? */
61static int buggy_uart;
62
63module_param(do_sound, int, 0444);
64module_param(buggy_uart, int, 0444);
65
66/*====================================================================*/
67
68/* Table of multi-port card ID's */
69
70struct serial_quirk {
71 unsigned int manfid;
72 unsigned int prodid;
73 int multi; /* 1 = multifunction, > 1 = # ports */
74 void (*config)(struct pcmcia_device *);
75 void (*setup)(struct pcmcia_device *, struct uart_8250_port *);
76 void (*wakeup)(struct pcmcia_device *);
77 int (*post)(struct pcmcia_device *);
78};
79
80struct serial_info {
81 struct pcmcia_device *p_dev;
82 int ndev;
83 int multi;
84 int slave;
85 int manfid;
86 int prodid;
87 int c950ctrl;
88 int line[4];
89 const struct serial_quirk *quirk;
90};
91
92struct serial_cfg_mem {
93 tuple_t tuple;
94 cisparse_t parse;
95 u_char buf[256];
96};
97
98/*
99 * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6"
100 * manfid 0x0160, 0x0104
101 * This card appears to have a 14.7456MHz clock.
102 */
103/* Generic Modem: MD55x (GPRS/EDGE) have
104 * Elan VPU16551 UART with 14.7456MHz oscillator
105 * manfid 0x015D, 0x4C45
106 */
107static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_8250_port *uart)
108{
109 uart->port.uartclk = 14745600;
110}
111
112static int quirk_post_ibm(struct pcmcia_device *link)
113{
114 u8 val;
115 int ret;
116
117 ret = pcmcia_read_config_byte(link, 0x800, &val);
118 if (ret)
119 goto failed;
120
121 ret = pcmcia_write_config_byte(link, 0x800, val | 1);
122 if (ret)
123 goto failed;
124 return 0;
125
126 failed:
127 return -ENODEV;
128}
129
130/*
131 * Nokia cards are not really multiport cards. Shouldn't this
132 * be handled by setting the quirk entry .multi = 0 | 1 ?
133 */
134static void quirk_config_nokia(struct pcmcia_device *link)
135{
136 struct serial_info *info = link->priv;
137
138 if (info->multi > 1)
139 info->multi = 1;
140}
141
142static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
143{
144 struct serial_info *info = link->priv;
145
146 if (info->c950ctrl)
147 outb(12, info->c950ctrl + 1);
148}
149
150/* request_region? oxsemi branch does no request_region too... */
151/*
152 * This sequence is needed to properly initialize MC45 attached to OXCF950.
153 * I tried decreasing these msleep()s, but it worked properly (survived
154 * 1000 stop/start operations) with these timeouts (or bigger).
155 */
156static void quirk_wakeup_possio_gcc(struct pcmcia_device *link)
157{
158 struct serial_info *info = link->priv;
159 unsigned int ctrl = info->c950ctrl;
160
161 outb(0xA, ctrl + 1);
162 msleep(100);
163 outb(0xE, ctrl + 1);
164 msleep(300);
165 outb(0xC, ctrl + 1);
166 msleep(100);
167 outb(0xE, ctrl + 1);
168 msleep(200);
169 outb(0xF, ctrl + 1);
170 msleep(100);
171 outb(0xE, ctrl + 1);
172 msleep(100);
173 outb(0xC, ctrl + 1);
174}
175
176/*
177 * Socket Dual IO: this enables irq's for second port
178 */
179static void quirk_config_socket(struct pcmcia_device *link)
180{
181 struct serial_info *info = link->priv;
182
183 if (info->multi)
184 link->config_flags |= CONF_ENABLE_ESR;
185}
186
187static const struct serial_quirk quirks[] = {
188 {
189 .manfid = 0x0160,
190 .prodid = 0x0104,
191 .multi = -1,
192 .setup = quirk_setup_brainboxes_0104,
193 }, {
194 .manfid = 0x015D,
195 .prodid = 0x4C45,
196 .multi = -1,
197 .setup = quirk_setup_brainboxes_0104,
198 }, {
199 .manfid = MANFID_IBM,
200 .prodid = ~0,
201 .multi = -1,
202 .post = quirk_post_ibm,
203 }, {
204 .manfid = MANFID_INTEL,
205 .prodid = PRODID_INTEL_DUAL_RS232,
206 .multi = 2,
207 }, {
208 .manfid = MANFID_NATINST,
209 .prodid = PRODID_NATINST_QUAD_RS232,
210 .multi = 4,
211 }, {
212 .manfid = MANFID_NOKIA,
213 .prodid = ~0,
214 .multi = -1,
215 .config = quirk_config_nokia,
216 }, {
217 .manfid = MANFID_OMEGA,
218 .prodid = PRODID_OMEGA_QSP_100,
219 .multi = 4,
220 }, {
221 .manfid = MANFID_OXSEMI,
222 .prodid = ~0,
223 .multi = -1,
224 .wakeup = quirk_wakeup_oxsemi,
225 }, {
226 .manfid = MANFID_POSSIO,
227 .prodid = PRODID_POSSIO_GCC,
228 .multi = -1,
229 .wakeup = quirk_wakeup_possio_gcc,
230 }, {
231 .manfid = MANFID_QUATECH,
232 .prodid = PRODID_QUATECH_DUAL_RS232,
233 .multi = 2,
234 }, {
235 .manfid = MANFID_QUATECH,
236 .prodid = PRODID_QUATECH_DUAL_RS232_D1,
237 .multi = 2,
238 }, {
239 .manfid = MANFID_QUATECH,
240 .prodid = PRODID_QUATECH_DUAL_RS232_G,
241 .multi = 2,
242 }, {
243 .manfid = MANFID_QUATECH,
244 .prodid = PRODID_QUATECH_QUAD_RS232,
245 .multi = 4,
246 }, {
247 .manfid = MANFID_SOCKET,
248 .prodid = PRODID_SOCKET_DUAL_RS232,
249 .multi = 2,
250 .config = quirk_config_socket,
251 }, {
252 .manfid = MANFID_SOCKET,
253 .prodid = ~0,
254 .multi = -1,
255 .config = quirk_config_socket,
256 }
257};
258
259
260static int serial_config(struct pcmcia_device *link);
261
262
263static void serial_remove(struct pcmcia_device *link)
264{
265 struct serial_info *info = link->priv;
266 int i;
267
268 dev_dbg(&link->dev, "serial_release\n");
269
270 /*
271 * Recheck to see if the device is still configured.
272 */
273 for (i = 0; i < info->ndev; i++)
274 serial8250_unregister_port(info->line[i]);
275
276 if (!info->slave)
277 pcmcia_disable_device(link);
278}
279
280static int serial_suspend(struct pcmcia_device *link)
281{
282 struct serial_info *info = link->priv;
283 int i;
284
285 for (i = 0; i < info->ndev; i++)
286 serial8250_suspend_port(info->line[i]);
287
288 return 0;
289}
290
291static int serial_resume(struct pcmcia_device *link)
292{
293 struct serial_info *info = link->priv;
294 int i;
295
296 for (i = 0; i < info->ndev; i++)
297 serial8250_resume_port(info->line[i]);
298
299 if (info->quirk && info->quirk->wakeup)
300 info->quirk->wakeup(link);
301
302 return 0;
303}
304
305static int serial_probe(struct pcmcia_device *link)
306{
307 struct serial_info *info;
308
309 dev_dbg(&link->dev, "serial_attach()\n");
310
311 /* Create new serial device */
312 info = kzalloc(sizeof(*info), GFP_KERNEL);
313 if (!info)
314 return -ENOMEM;
315 info->p_dev = link;
316 link->priv = info;
317
318 link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
319 if (do_sound)
320 link->config_flags |= CONF_ENABLE_SPKR;
321
322 return serial_config(link);
323}
324
325static void serial_detach(struct pcmcia_device *link)
326{
327 struct serial_info *info = link->priv;
328
329 dev_dbg(&link->dev, "serial_detach\n");
330
331 /*
332 * Ensure that the ports have been released.
333 */
334 serial_remove(link);
335
336 /* free bits */
337 kfree(info);
338}
339
340/*====================================================================*/
341
342static int setup_serial(struct pcmcia_device *handle, struct serial_info *info,
343 unsigned int iobase, int irq)
344{
345 struct uart_8250_port uart;
346 int line;
347
348 memset(&uart, 0, sizeof(uart));
349 uart.port.iobase = iobase;
350 uart.port.irq = irq;
351 uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
352 uart.port.uartclk = 1843200;
353 uart.port.dev = &handle->dev;
354 if (buggy_uart)
355 uart.port.flags |= UPF_BUGGY_UART;
356
357 if (info->quirk && info->quirk->setup)
358 info->quirk->setup(handle, &uart);
359
360 line = serial8250_register_8250_port(&uart);
361 if (line < 0) {
362 pr_err("serial_cs: serial8250_register_8250_port() at 0x%04lx, irq %d failed\n",
363 (unsigned long)iobase, irq);
364 return -EINVAL;
365 }
366
367 info->line[info->ndev] = line;
368 info->ndev++;
369
370 return 0;
371}
372
373/*====================================================================*/
374
375static int pfc_config(struct pcmcia_device *p_dev)
376{
377 unsigned int port = 0;
378 struct serial_info *info = p_dev->priv;
379
380 if ((p_dev->resource[1]->end != 0) &&
381 (resource_size(p_dev->resource[1]) == 8)) {
382 port = p_dev->resource[1]->start;
383 info->slave = 1;
384 } else if ((info->manfid == MANFID_OSITECH) &&
385 (resource_size(p_dev->resource[0]) == 0x40)) {
386 port = p_dev->resource[0]->start + 0x28;
387 info->slave = 1;
388 }
389 if (info->slave)
390 return setup_serial(p_dev, info, port, p_dev->irq);
391
392 dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
393 return -ENODEV;
394}
395
396static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data)
397{
398 static const int size_table[2] = { 8, 16 };
399 int *try = priv_data;
400
401 if (p_dev->resource[0]->start == 0)
402 return -ENODEV;
403
404 if ((*try & 0x1) == 0)
405 p_dev->io_lines = 16;
406
407 if (p_dev->resource[0]->end != size_table[(*try >> 1)])
408 return -ENODEV;
409
410 p_dev->resource[0]->end = 8;
411 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
412 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
413
414 return pcmcia_request_io(p_dev);
415}
416
417static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
418 void *priv_data)
419{
420 static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
421 int j;
422
423 if (p_dev->io_lines > 3)
424 return -ENODEV;
425
426 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
427 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
428 p_dev->resource[0]->end = 8;
429
430 for (j = 0; j < 5; j++) {
431 p_dev->resource[0]->start = base[j];
432 p_dev->io_lines = base[j] ? 16 : 3;
433 if (!pcmcia_request_io(p_dev))
434 return 0;
435 }
436 return -ENODEV;
437}
438
439static int simple_config(struct pcmcia_device *link)
440{
441 struct serial_info *info = link->priv;
442 int i = -ENODEV, try;
443
444 /*
445 * First pass: look for a config entry that looks normal.
446 * Two tries: without IO aliases, then with aliases.
447 */
448 link->config_flags |= CONF_AUTO_SET_VPP;
449 for (try = 0; try < 4; try++)
450 if (!pcmcia_loop_config(link, simple_config_check, &try))
451 goto found_port;
452
453 /*
454 * Second pass: try to find an entry that isn't picky about
455 * its base address, then try to grab any standard serial port
456 * address, and finally try to get any free port.
457 */
458 if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
459 goto found_port;
460
461 dev_warn(&link->dev, "no usable port range found, giving up\n");
462 return -1;
463
464found_port:
465 if (info->multi && (info->manfid == MANFID_3COM))
466 link->config_index &= ~(0x08);
467
468 /*
469 * Apply any configuration quirks.
470 */
471 if (info->quirk && info->quirk->config)
472 info->quirk->config(link);
473
474 i = pcmcia_enable_device(link);
475 if (i != 0)
476 return -1;
477 return setup_serial(link, info, link->resource[0]->start, link->irq);
478}
479
480static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data)
481{
482 int *multi = priv_data;
483
484 if (p_dev->resource[1]->end)
485 return -EINVAL;
486
487 /*
488 * The quad port cards have bad CIS's, so just look for a
489 * window larger than 8 ports and assume it will be right.
490 */
491 if (p_dev->resource[0]->end <= 8)
492 return -EINVAL;
493
494 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
495 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
496 p_dev->resource[0]->end = *multi * 8;
497
498 if (pcmcia_request_io(p_dev))
499 return -ENODEV;
500 return 0;
501}
502
503static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
504 void *priv_data)
505{
506 int *base2 = priv_data;
507
508 if (!p_dev->resource[0]->end || !p_dev->resource[1]->end ||
509 p_dev->resource[0]->start + 8 != p_dev->resource[1]->start)
510 return -ENODEV;
511
512 p_dev->resource[0]->end = p_dev->resource[1]->end = 8;
513 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
514 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
515
516 if (pcmcia_request_io(p_dev))
517 return -ENODEV;
518
519 *base2 = p_dev->resource[0]->start + 8;
520 return 0;
521}
522
523static int multi_config(struct pcmcia_device *link)
524{
525 struct serial_info *info = link->priv;
526 int i, base2 = 0;
527
528 /* First, look for a generic full-sized window */
529 if (!pcmcia_loop_config(link, multi_config_check, &info->multi))
530 base2 = link->resource[0]->start + 8;
531 else {
532 /* If that didn't work, look for two windows */
533 info->multi = 2;
534 if (pcmcia_loop_config(link, multi_config_check_notpicky,
535 &base2)) {
536 dev_warn(&link->dev,
537 "no usable port range found, giving up\n");
538 return -ENODEV;
539 }
540 }
541
542 if (!link->irq)
543 dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
544
545 /*
546 * Apply any configuration quirks.
547 */
548 if (info->quirk && info->quirk->config)
549 info->quirk->config(link);
550
551 i = pcmcia_enable_device(link);
552 if (i != 0)
553 return -ENODEV;
554
555 /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
556 * 8 registers are for the UART, the others are extra registers.
557 * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
558 */
559 if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
560 info->prodid == PRODID_POSSIO_GCC)) {
561 int err;
562
563 if (link->config_index == 1 ||
564 link->config_index == 3) {
565 err = setup_serial(link, info, base2,
566 link->irq);
567 base2 = link->resource[0]->start;
568 } else {
569 err = setup_serial(link, info, link->resource[0]->start,
570 link->irq);
571 }
572 info->c950ctrl = base2;
573
574 /*
575 * FIXME: We really should wake up the port prior to
576 * handing it over to the serial layer.
577 */
578 if (info->quirk && info->quirk->wakeup)
579 info->quirk->wakeup(link);
580
581 return 0;
582 }
583
584 setup_serial(link, info, link->resource[0]->start, link->irq);
585 for (i = 0; i < info->multi - 1; i++)
586 setup_serial(link, info, base2 + (8 * i),
587 link->irq);
588 return 0;
589}
590
591static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data)
592{
593 struct serial_info *info = p_dev->priv;
594
595 if (!p_dev->resource[0]->end)
596 return -EINVAL;
597
598 if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0))
599 info->multi = p_dev->resource[0]->end >> 3;
600
601 if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8)
602 && (p_dev->resource[1]->end == 8))
603 info->multi = 2;
604
605 return 0; /* break */
606}
607
608
609static int serial_config(struct pcmcia_device *link)
610{
611 struct serial_info *info = link->priv;
612 int i;
613
614 dev_dbg(&link->dev, "serial_config\n");
615
616 /* Is this a compliant multifunction card? */
617 info->multi = (link->socket->functions > 1);
618
619 /* Is this a multiport card? */
620 info->manfid = link->manf_id;
621 info->prodid = link->card_id;
622
623 for (i = 0; i < ARRAY_SIZE(quirks); i++)
624 if ((quirks[i].manfid == ~0 ||
625 quirks[i].manfid == info->manfid) &&
626 (quirks[i].prodid == ~0 ||
627 quirks[i].prodid == info->prodid)) {
628 info->quirk = &quirks[i];
629 break;
630 }
631
632 /*
633 * Another check for dual-serial cards: look for either serial or
634 * multifunction cards that ask for appropriate IO port ranges.
635 */
636 if ((info->multi == 0) &&
637 (link->has_func_id) &&
638 (link->socket->pcmcia_pfc == 0) &&
639 ((link->func_id == CISTPL_FUNCID_MULTI) ||
640 (link->func_id == CISTPL_FUNCID_SERIAL)))
641 pcmcia_loop_config(link, serial_check_for_multi, info);
642
643 /*
644 * Apply any multi-port quirk.
645 */
646 if (info->quirk && info->quirk->multi != -1)
647 info->multi = info->quirk->multi;
648
649 dev_info(&link->dev,
650 "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
651 link->manf_id, link->card_id,
652 link->socket->pcmcia_pfc, info->multi, info->quirk);
653 if (link->socket->pcmcia_pfc)
654 i = pfc_config(link);
655 else if (info->multi > 1)
656 i = multi_config(link);
657 else
658 i = simple_config(link);
659
660 if (i || info->ndev == 0)
661 goto failed;
662
663 /*
664 * Apply any post-init quirk. FIXME: This should really happen
665 * before we register the port, since it might already be in use.
666 */
667 if (info->quirk && info->quirk->post)
668 if (info->quirk->post(link))
669 goto failed;
670
671 return 0;
672
673failed:
674 dev_warn(&link->dev, "failed to initialize\n");
675 serial_remove(link);
676 return -ENODEV;
677}
678
679static const struct pcmcia_device_id serial_ids[] = {
680 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
681 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
682 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
683 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
684 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
685 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
686 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
687 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
688 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
689 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
690 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
691 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
692 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
693 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
694 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
695 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
696 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
697 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
698 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
699 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
700 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
701 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
702 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
703 PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
704 PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
705 PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
706 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
707 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
708 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
709 PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
710 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
711 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
712 PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001", 0x18df0ba0, 0x831b1064),
713 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
714 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
715 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
716 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
717 PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
718 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
719 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
720 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
721 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05),
722 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
723 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
724 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
725 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
726 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
727 PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
728 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
729 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
730 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
731 PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
732 PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
733 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
734 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
735 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
736 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
737 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */
738 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */
739 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */
740 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
741 PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */
742 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
743 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
744 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
745 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
746 PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
747 PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */
748 PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */
749 PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */
750 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
751 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
752 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
753 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
754 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
755 PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */
756 PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */
757 PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
758 PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
759 PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
760 PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
761 PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
762 PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
763 PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
764 PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
765 PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
766 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
767 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
768 PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
769 PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
770 PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b),
771 PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
772 PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
773 PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447),
774 PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
775 PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
776 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
777 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
778 PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
779 PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41),
780 PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
781 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
782 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
783 PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38),
784 PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292),
785 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
786 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
787 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
788 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
789 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
790 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
791 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
792 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
793 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
794 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
795 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
796 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
797 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
798 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */
799 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
800 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
801 PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
802 PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
803 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
804 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
805 PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
806 PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
807 PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
808 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100 1.00.", 0x19ca78af, 0xf964f42b),
809 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100", 0x19ca78af, 0x71d98e83),
810 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232 1.00.", 0x19ca78af, 0x69fb7490),
811 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232", 0x19ca78af, 0xb6bc0235),
812 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232", 0x63f2e0bd, 0xb9e175d3),
813 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232-5", 0x63f2e0bd, 0xfce33442),
814 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232", 0x3beb8cf2, 0x171e7190),
815 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232-5", 0x3beb8cf2, 0x20da4262),
816 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF428", 0x3beb8cf2, 0xea5dd57d),
817 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF500", 0x3beb8cf2, 0xd77255fa),
818 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: IC232", 0x3beb8cf2, 0x6a709903),
819 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: SL232", 0x3beb8cf2, 0x18430676),
820 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: XL232", 0x3beb8cf2, 0x6f933767),
821 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7),
822 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41),
823 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029),
824 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
825 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial+Parallel Port: SP230", 0x3beb8cf2, 0xdb9e58bc),
826 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7),
827 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41),
828 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029),
829 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
830 PCMCIA_MFC_DEVICE_PROD_ID12(2, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
831 PCMCIA_MFC_DEVICE_PROD_ID12(3, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
832 PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
833 /* too generic */
834 /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
835 /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
836 PCMCIA_DEVICE_FUNC_ID(2),
837 PCMCIA_DEVICE_NULL,
838};
839MODULE_DEVICE_TABLE(pcmcia, serial_ids);
840
841MODULE_FIRMWARE("cis/PCMLM28.cis");
842MODULE_FIRMWARE("cis/DP83903.cis");
843MODULE_FIRMWARE("cis/3CCFEM556.cis");
844MODULE_FIRMWARE("cis/3CXEM556.cis");
845MODULE_FIRMWARE("cis/SW_8xx_SER.cis");
846MODULE_FIRMWARE("cis/SW_7xx_SER.cis");
847MODULE_FIRMWARE("cis/SW_555_SER.cis");
848MODULE_FIRMWARE("cis/MT5634ZLX.cis");
849MODULE_FIRMWARE("cis/COMpad2.cis");
850MODULE_FIRMWARE("cis/COMpad4.cis");
851MODULE_FIRMWARE("cis/RS-COM-2P.cis");
852
853static struct pcmcia_driver serial_cs_driver = {
854 .owner = THIS_MODULE,
855 .name = "serial_cs",
856 .probe = serial_probe,
857 .remove = serial_detach,
858 .id_table = serial_ids,
859 .suspend = serial_suspend,
860 .resume = serial_resume,
861};
862module_pcmcia_driver(serial_cs_driver);
863
864MODULE_LICENSE("GPL");