Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * pata_rdc - Driver for later RDC PATA controllers
4 *
5 * This is actually a driver for hardware meeting
6 * INCITS 370-2004 (1510D): ATA Host Adapter Standards
7 *
8 * Based on ata_piix.
9 */
10
11#include <linux/kernel.h>
12#include <linux/module.h>
13#include <linux/pci.h>
14#include <linux/blkdev.h>
15#include <linux/delay.h>
16#include <linux/device.h>
17#include <linux/gfp.h>
18#include <scsi/scsi_host.h>
19#include <linux/libata.h>
20#include <linux/dmi.h>
21
22#define DRV_NAME "pata_rdc"
23#define DRV_VERSION "0.01"
24
25struct rdc_host_priv {
26 u32 saved_iocfg;
27};
28
29/**
30 * rdc_pata_cable_detect - Probe host controller cable detect info
31 * @ap: Port for which cable detect info is desired
32 *
33 * Read 80c cable indicator from ATA PCI device's PCI config
34 * register. This register is normally set by firmware (BIOS).
35 *
36 * LOCKING:
37 * None (inherited from caller).
38 */
39
40static int rdc_pata_cable_detect(struct ata_port *ap)
41{
42 struct rdc_host_priv *hpriv = ap->host->private_data;
43 u8 mask;
44
45 /* check BIOS cable detect results */
46 mask = 0x30 << (2 * ap->port_no);
47 if ((hpriv->saved_iocfg & mask) == 0)
48 return ATA_CBL_PATA40;
49 return ATA_CBL_PATA80;
50}
51
52/**
53 * rdc_pata_prereset - prereset for PATA host controller
54 * @link: Target link
55 * @deadline: deadline jiffies for the operation
56 *
57 * LOCKING:
58 * None (inherited from caller).
59 */
60static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline)
61{
62 struct ata_port *ap = link->ap;
63 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
64
65 static const struct pci_bits rdc_enable_bits[] = {
66 { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */
67 { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */
68 };
69
70 if (!pci_test_config_bits(pdev, &rdc_enable_bits[ap->port_no]))
71 return -ENOENT;
72 return ata_sff_prereset(link, deadline);
73}
74
75static DEFINE_SPINLOCK(rdc_lock);
76
77/**
78 * rdc_set_piomode - Initialize host controller PATA PIO timings
79 * @ap: Port whose timings we are configuring
80 * @adev: um
81 *
82 * Set PIO mode for device, in host controller PCI config space.
83 *
84 * LOCKING:
85 * None (inherited from caller).
86 */
87
88static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
89{
90 unsigned int pio = adev->pio_mode - XFER_PIO_0;
91 struct pci_dev *dev = to_pci_dev(ap->host->dev);
92 unsigned long flags;
93 unsigned int is_slave = (adev->devno != 0);
94 unsigned int master_port= ap->port_no ? 0x42 : 0x40;
95 unsigned int slave_port = 0x44;
96 u16 master_data;
97 u8 slave_data;
98 u8 udma_enable;
99 int control = 0;
100
101 static const /* ISP RTC */
102 u8 timings[][2] = { { 0, 0 },
103 { 0, 0 },
104 { 1, 0 },
105 { 2, 1 },
106 { 2, 3 }, };
107
108 if (pio >= 2)
109 control |= 1; /* TIME1 enable */
110 if (ata_pio_need_iordy(adev))
111 control |= 2; /* IE enable */
112
113 if (adev->class == ATA_DEV_ATA)
114 control |= 4; /* PPE enable */
115
116 spin_lock_irqsave(&rdc_lock, flags);
117
118 /* PIO configuration clears DTE unconditionally. It will be
119 * programmed in set_dmamode which is guaranteed to be called
120 * after set_piomode if any DMA mode is available.
121 */
122 pci_read_config_word(dev, master_port, &master_data);
123 if (is_slave) {
124 /* clear TIME1|IE1|PPE1|DTE1 */
125 master_data &= 0xff0f;
126 /* Enable SITRE (separate slave timing register) */
127 master_data |= 0x4000;
128 /* enable PPE1, IE1 and TIME1 as needed */
129 master_data |= (control << 4);
130 pci_read_config_byte(dev, slave_port, &slave_data);
131 slave_data &= (ap->port_no ? 0x0f : 0xf0);
132 /* Load the timing nibble for this slave */
133 slave_data |= ((timings[pio][0] << 2) | timings[pio][1])
134 << (ap->port_no ? 4 : 0);
135 } else {
136 /* clear ISP|RCT|TIME0|IE0|PPE0|DTE0 */
137 master_data &= 0xccf0;
138 /* Enable PPE, IE and TIME as appropriate */
139 master_data |= control;
140 /* load ISP and RCT */
141 master_data |=
142 (timings[pio][0] << 12) |
143 (timings[pio][1] << 8);
144 }
145 pci_write_config_word(dev, master_port, master_data);
146 if (is_slave)
147 pci_write_config_byte(dev, slave_port, slave_data);
148
149 /* Ensure the UDMA bit is off - it will be turned back on if
150 UDMA is selected */
151
152 pci_read_config_byte(dev, 0x48, &udma_enable);
153 udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
154 pci_write_config_byte(dev, 0x48, udma_enable);
155
156 spin_unlock_irqrestore(&rdc_lock, flags);
157}
158
159/**
160 * rdc_set_dmamode - Initialize host controller PATA PIO timings
161 * @ap: Port whose timings we are configuring
162 * @adev: Drive in question
163 *
164 * Set UDMA mode for device, in host controller PCI config space.
165 *
166 * LOCKING:
167 * None (inherited from caller).
168 */
169
170static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
171{
172 struct pci_dev *dev = to_pci_dev(ap->host->dev);
173 unsigned long flags;
174 u8 master_port = ap->port_no ? 0x42 : 0x40;
175 u16 master_data;
176 u8 speed = adev->dma_mode;
177 int devid = adev->devno + 2 * ap->port_no;
178 u8 udma_enable = 0;
179
180 static const /* ISP RTC */
181 u8 timings[][2] = { { 0, 0 },
182 { 0, 0 },
183 { 1, 0 },
184 { 2, 1 },
185 { 2, 3 }, };
186
187 spin_lock_irqsave(&rdc_lock, flags);
188
189 pci_read_config_word(dev, master_port, &master_data);
190 pci_read_config_byte(dev, 0x48, &udma_enable);
191
192 if (speed >= XFER_UDMA_0) {
193 unsigned int udma = adev->dma_mode - XFER_UDMA_0;
194 u16 udma_timing;
195 u16 ideconf;
196 int u_clock, u_speed;
197
198 /*
199 * UDMA is handled by a combination of clock switching and
200 * selection of dividers
201 *
202 * Handy rule: Odd modes are UDMATIMx 01, even are 02
203 * except UDMA0 which is 00
204 */
205 u_speed = min(2 - (udma & 1), udma);
206 if (udma == 5)
207 u_clock = 0x1000; /* 100Mhz */
208 else if (udma > 2)
209 u_clock = 1; /* 66Mhz */
210 else
211 u_clock = 0; /* 33Mhz */
212
213 udma_enable |= (1 << devid);
214
215 /* Load the CT/RP selection */
216 pci_read_config_word(dev, 0x4A, &udma_timing);
217 udma_timing &= ~(3 << (4 * devid));
218 udma_timing |= u_speed << (4 * devid);
219 pci_write_config_word(dev, 0x4A, udma_timing);
220
221 /* Select a 33/66/100Mhz clock */
222 pci_read_config_word(dev, 0x54, &ideconf);
223 ideconf &= ~(0x1001 << devid);
224 ideconf |= u_clock << devid;
225 pci_write_config_word(dev, 0x54, ideconf);
226 } else {
227 /*
228 * MWDMA is driven by the PIO timings. We must also enable
229 * IORDY unconditionally along with TIME1. PPE has already
230 * been set when the PIO timing was set.
231 */
232 unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0;
233 unsigned int control;
234 u8 slave_data;
235 const unsigned int needed_pio[3] = {
236 XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
237 };
238 int pio = needed_pio[mwdma] - XFER_PIO_0;
239
240 control = 3; /* IORDY|TIME1 */
241
242 /* If the drive MWDMA is faster than it can do PIO then
243 we must force PIO into PIO0 */
244
245 if (adev->pio_mode < needed_pio[mwdma])
246 /* Enable DMA timing only */
247 control |= 8; /* PIO cycles in PIO0 */
248
249 if (adev->devno) { /* Slave */
250 master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */
251 master_data |= control << 4;
252 pci_read_config_byte(dev, 0x44, &slave_data);
253 slave_data &= (ap->port_no ? 0x0f : 0xf0);
254 /* Load the matching timing */
255 slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
256 pci_write_config_byte(dev, 0x44, slave_data);
257 } else { /* Master */
258 master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY
259 and master timing bits */
260 master_data |= control;
261 master_data |=
262 (timings[pio][0] << 12) |
263 (timings[pio][1] << 8);
264 }
265
266 udma_enable &= ~(1 << devid);
267 pci_write_config_word(dev, master_port, master_data);
268 }
269 pci_write_config_byte(dev, 0x48, udma_enable);
270
271 spin_unlock_irqrestore(&rdc_lock, flags);
272}
273
274static struct ata_port_operations rdc_pata_ops = {
275 .inherits = &ata_bmdma32_port_ops,
276 .cable_detect = rdc_pata_cable_detect,
277 .set_piomode = rdc_set_piomode,
278 .set_dmamode = rdc_set_dmamode,
279 .prereset = rdc_pata_prereset,
280};
281
282static const struct ata_port_info rdc_port_info = {
283
284 .flags = ATA_FLAG_SLAVE_POSS,
285 .pio_mask = ATA_PIO4,
286 .mwdma_mask = ATA_MWDMA12_ONLY,
287 .udma_mask = ATA_UDMA5,
288 .port_ops = &rdc_pata_ops,
289};
290
291static struct scsi_host_template rdc_sht = {
292 ATA_BMDMA_SHT(DRV_NAME),
293};
294
295/**
296 * rdc_init_one - Register PIIX ATA PCI device with kernel services
297 * @pdev: PCI device to register
298 * @ent: Entry in rdc_pci_tbl matching with @pdev
299 *
300 * Called from kernel PCI layer. We probe for combined mode (sigh),
301 * and then hand over control to libata, for it to do the rest.
302 *
303 * LOCKING:
304 * Inherited from PCI layer (may sleep).
305 *
306 * RETURNS:
307 * Zero on success, or -ERRNO value.
308 */
309
310static int rdc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
311{
312 struct device *dev = &pdev->dev;
313 struct ata_port_info port_info[2];
314 const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] };
315 struct ata_host *host;
316 struct rdc_host_priv *hpriv;
317 int rc;
318
319 ata_print_version_once(&pdev->dev, DRV_VERSION);
320
321 port_info[0] = rdc_port_info;
322 port_info[1] = rdc_port_info;
323
324 /* enable device and prepare host */
325 rc = pcim_enable_device(pdev);
326 if (rc)
327 return rc;
328
329 hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
330 if (!hpriv)
331 return -ENOMEM;
332
333 /* Save IOCFG, this will be used for cable detection, quirk
334 * detection and restoration on detach.
335 */
336 pci_read_config_dword(pdev, 0x54, &hpriv->saved_iocfg);
337
338 rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
339 if (rc)
340 return rc;
341 host->private_data = hpriv;
342
343 pci_intx(pdev, 1);
344
345 host->flags |= ATA_HOST_PARALLEL_SCAN;
346
347 pci_set_master(pdev);
348 return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &rdc_sht);
349}
350
351static void rdc_remove_one(struct pci_dev *pdev)
352{
353 struct ata_host *host = pci_get_drvdata(pdev);
354 struct rdc_host_priv *hpriv = host->private_data;
355
356 pci_write_config_dword(pdev, 0x54, hpriv->saved_iocfg);
357
358 ata_pci_remove_one(pdev);
359}
360
361static const struct pci_device_id rdc_pci_tbl[] = {
362 { PCI_DEVICE(0x17F3, 0x1011), },
363 { PCI_DEVICE(0x17F3, 0x1012), },
364 { } /* terminate list */
365};
366
367static struct pci_driver rdc_pci_driver = {
368 .name = DRV_NAME,
369 .id_table = rdc_pci_tbl,
370 .probe = rdc_init_one,
371 .remove = rdc_remove_one,
372#ifdef CONFIG_PM_SLEEP
373 .suspend = ata_pci_device_suspend,
374 .resume = ata_pci_device_resume,
375#endif
376};
377
378
379module_pci_driver(rdc_pci_driver);
380
381MODULE_AUTHOR("Alan Cox (based on ata_piix)");
382MODULE_DESCRIPTION("SCSI low-level driver for RDC PATA controllers");
383MODULE_LICENSE("GPL");
384MODULE_DEVICE_TABLE(pci, rdc_pci_tbl);
385MODULE_VERSION(DRV_VERSION);
1/*
2 * pata_rdc - Driver for later RDC PATA controllers
3 *
4 * This is actually a driver for hardware meeting
5 * INCITS 370-2004 (1510D): ATA Host Adapter Standards
6 *
7 * Based on ata_piix.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2, or (at your option)
12 * any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; see the file COPYING. If not, write to
21 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
22 */
23
24#include <linux/kernel.h>
25#include <linux/module.h>
26#include <linux/pci.h>
27#include <linux/blkdev.h>
28#include <linux/delay.h>
29#include <linux/device.h>
30#include <linux/gfp.h>
31#include <scsi/scsi_host.h>
32#include <linux/libata.h>
33#include <linux/dmi.h>
34
35#define DRV_NAME "pata_rdc"
36#define DRV_VERSION "0.01"
37
38struct rdc_host_priv {
39 u32 saved_iocfg;
40};
41
42/**
43 * rdc_pata_cable_detect - Probe host controller cable detect info
44 * @ap: Port for which cable detect info is desired
45 *
46 * Read 80c cable indicator from ATA PCI device's PCI config
47 * register. This register is normally set by firmware (BIOS).
48 *
49 * LOCKING:
50 * None (inherited from caller).
51 */
52
53static int rdc_pata_cable_detect(struct ata_port *ap)
54{
55 struct rdc_host_priv *hpriv = ap->host->private_data;
56 u8 mask;
57
58 /* check BIOS cable detect results */
59 mask = 0x30 << (2 * ap->port_no);
60 if ((hpriv->saved_iocfg & mask) == 0)
61 return ATA_CBL_PATA40;
62 return ATA_CBL_PATA80;
63}
64
65/**
66 * rdc_pata_prereset - prereset for PATA host controller
67 * @link: Target link
68 * @deadline: deadline jiffies for the operation
69 *
70 * LOCKING:
71 * None (inherited from caller).
72 */
73static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline)
74{
75 struct ata_port *ap = link->ap;
76 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
77
78 static const struct pci_bits rdc_enable_bits[] = {
79 { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */
80 { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */
81 };
82
83 if (!pci_test_config_bits(pdev, &rdc_enable_bits[ap->port_no]))
84 return -ENOENT;
85 return ata_sff_prereset(link, deadline);
86}
87
88static DEFINE_SPINLOCK(rdc_lock);
89
90/**
91 * rdc_set_piomode - Initialize host controller PATA PIO timings
92 * @ap: Port whose timings we are configuring
93 * @adev: um
94 *
95 * Set PIO mode for device, in host controller PCI config space.
96 *
97 * LOCKING:
98 * None (inherited from caller).
99 */
100
101static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
102{
103 unsigned int pio = adev->pio_mode - XFER_PIO_0;
104 struct pci_dev *dev = to_pci_dev(ap->host->dev);
105 unsigned long flags;
106 unsigned int is_slave = (adev->devno != 0);
107 unsigned int master_port= ap->port_no ? 0x42 : 0x40;
108 unsigned int slave_port = 0x44;
109 u16 master_data;
110 u8 slave_data;
111 u8 udma_enable;
112 int control = 0;
113
114 static const /* ISP RTC */
115 u8 timings[][2] = { { 0, 0 },
116 { 0, 0 },
117 { 1, 0 },
118 { 2, 1 },
119 { 2, 3 }, };
120
121 if (pio >= 2)
122 control |= 1; /* TIME1 enable */
123 if (ata_pio_need_iordy(adev))
124 control |= 2; /* IE enable */
125
126 if (adev->class == ATA_DEV_ATA)
127 control |= 4; /* PPE enable */
128
129 spin_lock_irqsave(&rdc_lock, flags);
130
131 /* PIO configuration clears DTE unconditionally. It will be
132 * programmed in set_dmamode which is guaranteed to be called
133 * after set_piomode if any DMA mode is available.
134 */
135 pci_read_config_word(dev, master_port, &master_data);
136 if (is_slave) {
137 /* clear TIME1|IE1|PPE1|DTE1 */
138 master_data &= 0xff0f;
139 /* Enable SITRE (separate slave timing register) */
140 master_data |= 0x4000;
141 /* enable PPE1, IE1 and TIME1 as needed */
142 master_data |= (control << 4);
143 pci_read_config_byte(dev, slave_port, &slave_data);
144 slave_data &= (ap->port_no ? 0x0f : 0xf0);
145 /* Load the timing nibble for this slave */
146 slave_data |= ((timings[pio][0] << 2) | timings[pio][1])
147 << (ap->port_no ? 4 : 0);
148 } else {
149 /* clear ISP|RCT|TIME0|IE0|PPE0|DTE0 */
150 master_data &= 0xccf0;
151 /* Enable PPE, IE and TIME as appropriate */
152 master_data |= control;
153 /* load ISP and RCT */
154 master_data |=
155 (timings[pio][0] << 12) |
156 (timings[pio][1] << 8);
157 }
158 pci_write_config_word(dev, master_port, master_data);
159 if (is_slave)
160 pci_write_config_byte(dev, slave_port, slave_data);
161
162 /* Ensure the UDMA bit is off - it will be turned back on if
163 UDMA is selected */
164
165 pci_read_config_byte(dev, 0x48, &udma_enable);
166 udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
167 pci_write_config_byte(dev, 0x48, udma_enable);
168
169 spin_unlock_irqrestore(&rdc_lock, flags);
170}
171
172/**
173 * rdc_set_dmamode - Initialize host controller PATA PIO timings
174 * @ap: Port whose timings we are configuring
175 * @adev: Drive in question
176 *
177 * Set UDMA mode for device, in host controller PCI config space.
178 *
179 * LOCKING:
180 * None (inherited from caller).
181 */
182
183static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
184{
185 struct pci_dev *dev = to_pci_dev(ap->host->dev);
186 unsigned long flags;
187 u8 master_port = ap->port_no ? 0x42 : 0x40;
188 u16 master_data;
189 u8 speed = adev->dma_mode;
190 int devid = adev->devno + 2 * ap->port_no;
191 u8 udma_enable = 0;
192
193 static const /* ISP RTC */
194 u8 timings[][2] = { { 0, 0 },
195 { 0, 0 },
196 { 1, 0 },
197 { 2, 1 },
198 { 2, 3 }, };
199
200 spin_lock_irqsave(&rdc_lock, flags);
201
202 pci_read_config_word(dev, master_port, &master_data);
203 pci_read_config_byte(dev, 0x48, &udma_enable);
204
205 if (speed >= XFER_UDMA_0) {
206 unsigned int udma = adev->dma_mode - XFER_UDMA_0;
207 u16 udma_timing;
208 u16 ideconf;
209 int u_clock, u_speed;
210
211 /*
212 * UDMA is handled by a combination of clock switching and
213 * selection of dividers
214 *
215 * Handy rule: Odd modes are UDMATIMx 01, even are 02
216 * except UDMA0 which is 00
217 */
218 u_speed = min(2 - (udma & 1), udma);
219 if (udma == 5)
220 u_clock = 0x1000; /* 100Mhz */
221 else if (udma > 2)
222 u_clock = 1; /* 66Mhz */
223 else
224 u_clock = 0; /* 33Mhz */
225
226 udma_enable |= (1 << devid);
227
228 /* Load the CT/RP selection */
229 pci_read_config_word(dev, 0x4A, &udma_timing);
230 udma_timing &= ~(3 << (4 * devid));
231 udma_timing |= u_speed << (4 * devid);
232 pci_write_config_word(dev, 0x4A, udma_timing);
233
234 /* Select a 33/66/100Mhz clock */
235 pci_read_config_word(dev, 0x54, &ideconf);
236 ideconf &= ~(0x1001 << devid);
237 ideconf |= u_clock << devid;
238 pci_write_config_word(dev, 0x54, ideconf);
239 } else {
240 /*
241 * MWDMA is driven by the PIO timings. We must also enable
242 * IORDY unconditionally along with TIME1. PPE has already
243 * been set when the PIO timing was set.
244 */
245 unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0;
246 unsigned int control;
247 u8 slave_data;
248 const unsigned int needed_pio[3] = {
249 XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
250 };
251 int pio = needed_pio[mwdma] - XFER_PIO_0;
252
253 control = 3; /* IORDY|TIME1 */
254
255 /* If the drive MWDMA is faster than it can do PIO then
256 we must force PIO into PIO0 */
257
258 if (adev->pio_mode < needed_pio[mwdma])
259 /* Enable DMA timing only */
260 control |= 8; /* PIO cycles in PIO0 */
261
262 if (adev->devno) { /* Slave */
263 master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */
264 master_data |= control << 4;
265 pci_read_config_byte(dev, 0x44, &slave_data);
266 slave_data &= (ap->port_no ? 0x0f : 0xf0);
267 /* Load the matching timing */
268 slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
269 pci_write_config_byte(dev, 0x44, slave_data);
270 } else { /* Master */
271 master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY
272 and master timing bits */
273 master_data |= control;
274 master_data |=
275 (timings[pio][0] << 12) |
276 (timings[pio][1] << 8);
277 }
278
279 udma_enable &= ~(1 << devid);
280 pci_write_config_word(dev, master_port, master_data);
281 }
282 pci_write_config_byte(dev, 0x48, udma_enable);
283
284 spin_unlock_irqrestore(&rdc_lock, flags);
285}
286
287static struct ata_port_operations rdc_pata_ops = {
288 .inherits = &ata_bmdma32_port_ops,
289 .cable_detect = rdc_pata_cable_detect,
290 .set_piomode = rdc_set_piomode,
291 .set_dmamode = rdc_set_dmamode,
292 .prereset = rdc_pata_prereset,
293};
294
295static struct ata_port_info rdc_port_info = {
296
297 .flags = ATA_FLAG_SLAVE_POSS,
298 .pio_mask = ATA_PIO4,
299 .mwdma_mask = ATA_MWDMA12_ONLY,
300 .udma_mask = ATA_UDMA5,
301 .port_ops = &rdc_pata_ops,
302};
303
304static struct scsi_host_template rdc_sht = {
305 ATA_BMDMA_SHT(DRV_NAME),
306};
307
308/**
309 * rdc_init_one - Register PIIX ATA PCI device with kernel services
310 * @pdev: PCI device to register
311 * @ent: Entry in rdc_pci_tbl matching with @pdev
312 *
313 * Called from kernel PCI layer. We probe for combined mode (sigh),
314 * and then hand over control to libata, for it to do the rest.
315 *
316 * LOCKING:
317 * Inherited from PCI layer (may sleep).
318 *
319 * RETURNS:
320 * Zero on success, or -ERRNO value.
321 */
322
323static int rdc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
324{
325 struct device *dev = &pdev->dev;
326 struct ata_port_info port_info[2];
327 const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] };
328 struct ata_host *host;
329 struct rdc_host_priv *hpriv;
330 int rc;
331
332 ata_print_version_once(&pdev->dev, DRV_VERSION);
333
334 port_info[0] = rdc_port_info;
335 port_info[1] = rdc_port_info;
336
337 /* enable device and prepare host */
338 rc = pcim_enable_device(pdev);
339 if (rc)
340 return rc;
341
342 hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
343 if (!hpriv)
344 return -ENOMEM;
345
346 /* Save IOCFG, this will be used for cable detection, quirk
347 * detection and restoration on detach.
348 */
349 pci_read_config_dword(pdev, 0x54, &hpriv->saved_iocfg);
350
351 rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
352 if (rc)
353 return rc;
354 host->private_data = hpriv;
355
356 pci_intx(pdev, 1);
357
358 host->flags |= ATA_HOST_PARALLEL_SCAN;
359
360 pci_set_master(pdev);
361 return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &rdc_sht);
362}
363
364static void rdc_remove_one(struct pci_dev *pdev)
365{
366 struct ata_host *host = pci_get_drvdata(pdev);
367 struct rdc_host_priv *hpriv = host->private_data;
368
369 pci_write_config_dword(pdev, 0x54, hpriv->saved_iocfg);
370
371 ata_pci_remove_one(pdev);
372}
373
374static const struct pci_device_id rdc_pci_tbl[] = {
375 { PCI_DEVICE(0x17F3, 0x1011), },
376 { PCI_DEVICE(0x17F3, 0x1012), },
377 { } /* terminate list */
378};
379
380static struct pci_driver rdc_pci_driver = {
381 .name = DRV_NAME,
382 .id_table = rdc_pci_tbl,
383 .probe = rdc_init_one,
384 .remove = rdc_remove_one,
385#ifdef CONFIG_PM_SLEEP
386 .suspend = ata_pci_device_suspend,
387 .resume = ata_pci_device_resume,
388#endif
389};
390
391
392module_pci_driver(rdc_pci_driver);
393
394MODULE_AUTHOR("Alan Cox (based on ata_piix)");
395MODULE_DESCRIPTION("SCSI low-level driver for RDC PATA controllers");
396MODULE_LICENSE("GPL");
397MODULE_DEVICE_TABLE(pci, rdc_pci_tbl);
398MODULE_VERSION(DRV_VERSION);