Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * STx/Freescale ADS5125 MPC5125 silicon
4 *
5 * Copyright (C) 2009 Freescale Semiconductor Inc. All rights reserved.
6 *
7 * Reworked by Matteo Facchinetti (engineering@sirius-es.it)
8 * Copyright (C) 2013 Sirius Electronic Systems
9 */
10
11#include <dt-bindings/clock/mpc512x-clock.h>
12
13/dts-v1/;
14
15/ {
16 model = "mpc5125twr"; // In BSP "mpc5125ads"
17 compatible = "fsl,mpc5125ads", "fsl,mpc5125";
18 #address-cells = <1>;
19 #size-cells = <1>;
20 interrupt-parent = <&ipic>;
21
22 aliases {
23 gpio0 = &gpio0;
24 gpio1 = &gpio1;
25 ethernet0 = ð0;
26 };
27
28 cpus {
29 #address-cells = <1>;
30 #size-cells = <0>;
31
32 PowerPC,5125@0 {
33 device_type = "cpu";
34 reg = <0>;
35 d-cache-line-size = <0x20>; // 32 bytes
36 i-cache-line-size = <0x20>; // 32 bytes
37 d-cache-size = <0x8000>; // L1, 32K
38 i-cache-size = <0x8000>; // L1, 32K
39 timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
40 bus-frequency = <198000000>; // 198 MHz csb bus
41 clock-frequency = <396000000>; // 396 MHz ppc core
42 };
43 };
44
45 memory {
46 device_type = "memory";
47 reg = <0x00000000 0x10000000>; // 256MB at 0
48 };
49
50 sram@30000000 {
51 compatible = "fsl,mpc5121-sram";
52 reg = <0x30000000 0x08000>; // 32K at 0x30000000
53 };
54
55 clocks {
56 #address-cells = <1>;
57 #size-cells = <0>;
58
59 osc: osc {
60 compatible = "fixed-clock";
61 #clock-cells = <0>;
62 clock-frequency = <33000000>;
63 };
64 };
65
66 soc@80000000 {
67 compatible = "fsl,mpc5121-immr";
68 #address-cells = <1>;
69 #size-cells = <1>;
70 ranges = <0x0 0x80000000 0x400000>;
71 reg = <0x80000000 0x400000>;
72 bus-frequency = <66000000>; // 66 MHz ips bus
73
74 // IPIC
75 // interrupts cell = <intr #, sense>
76 // sense values match linux IORESOURCE_IRQ_* defines:
77 // sense == 8: Level, low assertion
78 // sense == 2: Edge, high-to-low change
79 //
80 ipic: interrupt-controller@c00 {
81 compatible = "fsl,mpc5121-ipic", "fsl,ipic";
82 interrupt-controller;
83 #address-cells = <0>;
84 #interrupt-cells = <2>;
85 reg = <0xc00 0x100>;
86 };
87
88 rtc@a00 { // Real time clock
89 compatible = "fsl,mpc5121-rtc";
90 reg = <0xa00 0x100>;
91 interrupts = <79 0x8 80 0x8>;
92 };
93
94 reset@e00 { // Reset module
95 compatible = "fsl,mpc5125-reset";
96 reg = <0xe00 0x100>;
97 };
98
99 clks: clock@f00 { // Clock control
100 compatible = "fsl,mpc5121-clock";
101 reg = <0xf00 0x100>;
102 #clock-cells = <1>;
103 clocks = <&osc>;
104 clock-names = "osc";
105 };
106
107 pmc@1000{ // Power Management Controller
108 compatible = "fsl,mpc5121-pmc";
109 reg = <0x1000 0x100>;
110 interrupts = <83 0x2>;
111 };
112
113 gpio0: gpio@1100 {
114 compatible = "fsl,mpc5125-gpio";
115 reg = <0x1100 0x080>;
116 interrupts = <78 0x8>;
117 };
118
119 gpio1: gpio@1180 {
120 compatible = "fsl,mpc5125-gpio";
121 reg = <0x1180 0x080>;
122 interrupts = <86 0x8>;
123 };
124
125 can@1300 { // CAN rev.2
126 compatible = "fsl,mpc5121-mscan";
127 interrupts = <12 0x8>;
128 reg = <0x1300 0x80>;
129 clocks = <&clks MPC512x_CLK_BDLC>,
130 <&clks MPC512x_CLK_IPS>,
131 <&clks MPC512x_CLK_SYS>,
132 <&clks MPC512x_CLK_REF>,
133 <&clks MPC512x_CLK_MSCAN0_MCLK>;
134 clock-names = "ipg", "ips", "sys", "ref", "mclk";
135 };
136
137 can@1380 {
138 compatible = "fsl,mpc5121-mscan";
139 interrupts = <13 0x8>;
140 reg = <0x1380 0x80>;
141 clocks = <&clks MPC512x_CLK_BDLC>,
142 <&clks MPC512x_CLK_IPS>,
143 <&clks MPC512x_CLK_SYS>,
144 <&clks MPC512x_CLK_REF>,
145 <&clks MPC512x_CLK_MSCAN1_MCLK>;
146 clock-names = "ipg", "ips", "sys", "ref", "mclk";
147 };
148
149 sdhc@1500 {
150 compatible = "fsl,mpc5121-sdhc";
151 interrupts = <8 0x8>;
152 reg = <0x1500 0x100>;
153 clocks = <&clks MPC512x_CLK_IPS>,
154 <&clks MPC512x_CLK_SDHC>;
155 clock-names = "ipg", "per";
156 };
157
158 i2c@1700 {
159 #address-cells = <1>;
160 #size-cells = <0>;
161 compatible = "fsl,mpc5121-i2c", "fsl-i2c";
162 reg = <0x1700 0x20>;
163 interrupts = <0x9 0x8>;
164 clocks = <&clks MPC512x_CLK_I2C>;
165 clock-names = "ipg";
166 };
167
168 i2c@1720 {
169 #address-cells = <1>;
170 #size-cells = <0>;
171 compatible = "fsl,mpc5121-i2c", "fsl-i2c";
172 reg = <0x1720 0x20>;
173 interrupts = <0xa 0x8>;
174 clocks = <&clks MPC512x_CLK_I2C>;
175 clock-names = "ipg";
176 };
177
178 i2c@1740 {
179 #address-cells = <1>;
180 #size-cells = <0>;
181 compatible = "fsl,mpc5121-i2c", "fsl-i2c";
182 reg = <0x1740 0x20>;
183 interrupts = <0xb 0x8>;
184 clocks = <&clks MPC512x_CLK_I2C>;
185 clock-names = "ipg";
186 };
187
188 i2ccontrol@1760 {
189 compatible = "fsl,mpc5121-i2c-ctrl";
190 reg = <0x1760 0x8>;
191 };
192
193 diu@2100 {
194 compatible = "fsl,mpc5121-diu";
195 reg = <0x2100 0x100>;
196 interrupts = <64 0x8>;
197 clocks = <&clks MPC512x_CLK_DIU>;
198 clock-names = "ipg";
199 };
200
201 mdio@2800 {
202 compatible = "fsl,mpc5121-fec-mdio";
203 reg = <0x2800 0x800>;
204 #address-cells = <1>;
205 #size-cells = <0>;
206 phy0: ethernet-phy@0 {
207 reg = <1>;
208 };
209 };
210
211 eth0: ethernet@2800 {
212 compatible = "fsl,mpc5125-fec";
213 reg = <0x2800 0x800>;
214 local-mac-address = [ 00 00 00 00 00 00 ];
215 interrupts = <4 0x8>;
216 phy-handle = < &phy0 >;
217 phy-connection-type = "rmii";
218 clocks = <&clks MPC512x_CLK_FEC>;
219 clock-names = "per";
220 };
221
222 // IO control
223 ioctl@a000 {
224 compatible = "fsl,mpc5125-ioctl";
225 reg = <0xA000 0x1000>;
226 };
227
228 // disable USB1 port
229 // TODO:
230 // correct pinmux config and fix USB3320 ulpi dependency
231 // before re-enabling it
232 usb@3000 {
233 compatible = "fsl,mpc5121-usb2-dr";
234 reg = <0x3000 0x400>;
235 #address-cells = <1>;
236 #size-cells = <0>;
237 interrupts = <43 0x8>;
238 dr_mode = "host";
239 phy_type = "ulpi";
240 clocks = <&clks MPC512x_CLK_USB1>;
241 clock-names = "ipg";
242 status = "disabled";
243 };
244
245 sclpc@10100 {
246 compatible = "fsl,mpc512x-lpbfifo";
247 reg = <0x10100 0x50>;
248 interrupts = <7 0x8>;
249 dmas = <&dma0 26>;
250 dma-names = "rx-tx";
251 };
252
253 // 5125 PSCs are not 52xx or 5121 PSC compatible
254 // PSC1 uart0 aka ttyPSC0
255 serial@11100 {
256 compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
257 reg = <0x11100 0x100>;
258 interrupts = <40 0x8>;
259 fsl,rx-fifo-size = <16>;
260 fsl,tx-fifo-size = <16>;
261 clocks = <&clks MPC512x_CLK_PSC1>,
262 <&clks MPC512x_CLK_PSC1_MCLK>;
263 clock-names = "ipg", "mclk";
264 };
265
266 // PSC9 uart1 aka ttyPSC1
267 serial@11900 {
268 compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
269 reg = <0x11900 0x100>;
270 interrupts = <40 0x8>;
271 fsl,rx-fifo-size = <16>;
272 fsl,tx-fifo-size = <16>;
273 clocks = <&clks MPC512x_CLK_PSC9>,
274 <&clks MPC512x_CLK_PSC9_MCLK>;
275 clock-names = "ipg", "mclk";
276 };
277
278 pscfifo@11f00 {
279 compatible = "fsl,mpc5121-psc-fifo";
280 reg = <0x11f00 0x100>;
281 interrupts = <40 0x8>;
282 clocks = <&clks MPC512x_CLK_PSC_FIFO>;
283 clock-names = "ipg";
284 };
285
286 dma0: dma@14000 {
287 compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2"
288 reg = <0x14000 0x1800>;
289 interrupts = <65 0x8>;
290 #dma-cells = <1>;
291 };
292 };
293};
1/*
2 * STx/Freescale ADS5125 MPC5125 silicon
3 *
4 * Copyright (C) 2009 Freescale Semiconductor Inc. All rights reserved.
5 *
6 * Reworked by Matteo Facchinetti (engineering@sirius-es.it)
7 * Copyright (C) 2013 Sirius Electronic Systems
8 *
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License as published by the
11 * Free Software Foundation; either version 2 of the License, or (at your
12 * option) any later version.
13 */
14
15#include <dt-bindings/clock/mpc512x-clock.h>
16
17/dts-v1/;
18
19/ {
20 model = "mpc5125twr"; // In BSP "mpc5125ads"
21 compatible = "fsl,mpc5125ads", "fsl,mpc5125";
22 #address-cells = <1>;
23 #size-cells = <1>;
24 interrupt-parent = <&ipic>;
25
26 aliases {
27 gpio0 = &gpio0;
28 gpio1 = &gpio1;
29 ethernet0 = ð0;
30 };
31
32 cpus {
33 #address-cells = <1>;
34 #size-cells = <0>;
35
36 PowerPC,5125@0 {
37 device_type = "cpu";
38 reg = <0>;
39 d-cache-line-size = <0x20>; // 32 bytes
40 i-cache-line-size = <0x20>; // 32 bytes
41 d-cache-size = <0x8000>; // L1, 32K
42 i-cache-size = <0x8000>; // L1, 32K
43 timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
44 bus-frequency = <198000000>; // 198 MHz csb bus
45 clock-frequency = <396000000>; // 396 MHz ppc core
46 };
47 };
48
49 memory {
50 device_type = "memory";
51 reg = <0x00000000 0x10000000>; // 256MB at 0
52 };
53
54 sram@30000000 {
55 compatible = "fsl,mpc5121-sram";
56 reg = <0x30000000 0x08000>; // 32K at 0x30000000
57 };
58
59 clocks {
60 #address-cells = <1>;
61 #size-cells = <0>;
62
63 osc: osc {
64 compatible = "fixed-clock";
65 #clock-cells = <0>;
66 clock-frequency = <33000000>;
67 };
68 };
69
70 soc@80000000 {
71 compatible = "fsl,mpc5121-immr";
72 #address-cells = <1>;
73 #size-cells = <1>;
74 ranges = <0x0 0x80000000 0x400000>;
75 reg = <0x80000000 0x400000>;
76 bus-frequency = <66000000>; // 66 MHz ips bus
77
78 // IPIC
79 // interrupts cell = <intr #, sense>
80 // sense values match linux IORESOURCE_IRQ_* defines:
81 // sense == 8: Level, low assertion
82 // sense == 2: Edge, high-to-low change
83 //
84 ipic: interrupt-controller@c00 {
85 compatible = "fsl,mpc5121-ipic", "fsl,ipic";
86 interrupt-controller;
87 #address-cells = <0>;
88 #interrupt-cells = <2>;
89 reg = <0xc00 0x100>;
90 };
91
92 rtc@a00 { // Real time clock
93 compatible = "fsl,mpc5121-rtc";
94 reg = <0xa00 0x100>;
95 interrupts = <79 0x8 80 0x8>;
96 };
97
98 reset@e00 { // Reset module
99 compatible = "fsl,mpc5125-reset";
100 reg = <0xe00 0x100>;
101 };
102
103 clks: clock@f00 { // Clock control
104 compatible = "fsl,mpc5121-clock";
105 reg = <0xf00 0x100>;
106 #clock-cells = <1>;
107 clocks = <&osc>;
108 clock-names = "osc";
109 };
110
111 pmc@1000{ // Power Management Controller
112 compatible = "fsl,mpc5121-pmc";
113 reg = <0x1000 0x100>;
114 interrupts = <83 0x2>;
115 };
116
117 gpio0: gpio@1100 {
118 compatible = "fsl,mpc5125-gpio";
119 reg = <0x1100 0x080>;
120 interrupts = <78 0x8>;
121 };
122
123 gpio1: gpio@1180 {
124 compatible = "fsl,mpc5125-gpio";
125 reg = <0x1180 0x080>;
126 interrupts = <86 0x8>;
127 };
128
129 can@1300 { // CAN rev.2
130 compatible = "fsl,mpc5121-mscan";
131 interrupts = <12 0x8>;
132 reg = <0x1300 0x80>;
133 clocks = <&clks MPC512x_CLK_BDLC>,
134 <&clks MPC512x_CLK_IPS>,
135 <&clks MPC512x_CLK_SYS>,
136 <&clks MPC512x_CLK_REF>,
137 <&clks MPC512x_CLK_MSCAN0_MCLK>;
138 clock-names = "ipg", "ips", "sys", "ref", "mclk";
139 };
140
141 can@1380 {
142 compatible = "fsl,mpc5121-mscan";
143 interrupts = <13 0x8>;
144 reg = <0x1380 0x80>;
145 clocks = <&clks MPC512x_CLK_BDLC>,
146 <&clks MPC512x_CLK_IPS>,
147 <&clks MPC512x_CLK_SYS>,
148 <&clks MPC512x_CLK_REF>,
149 <&clks MPC512x_CLK_MSCAN1_MCLK>;
150 clock-names = "ipg", "ips", "sys", "ref", "mclk";
151 };
152
153 sdhc@1500 {
154 compatible = "fsl,mpc5121-sdhc";
155 interrupts = <8 0x8>;
156 reg = <0x1500 0x100>;
157 clocks = <&clks MPC512x_CLK_IPS>,
158 <&clks MPC512x_CLK_SDHC>;
159 clock-names = "ipg", "per";
160 };
161
162 i2c@1700 {
163 #address-cells = <1>;
164 #size-cells = <0>;
165 compatible = "fsl,mpc5121-i2c", "fsl-i2c";
166 reg = <0x1700 0x20>;
167 interrupts = <0x9 0x8>;
168 clocks = <&clks MPC512x_CLK_I2C>;
169 clock-names = "ipg";
170 };
171
172 i2c@1720 {
173 #address-cells = <1>;
174 #size-cells = <0>;
175 compatible = "fsl,mpc5121-i2c", "fsl-i2c";
176 reg = <0x1720 0x20>;
177 interrupts = <0xa 0x8>;
178 clocks = <&clks MPC512x_CLK_I2C>;
179 clock-names = "ipg";
180 };
181
182 i2c@1740 {
183 #address-cells = <1>;
184 #size-cells = <0>;
185 compatible = "fsl,mpc5121-i2c", "fsl-i2c";
186 reg = <0x1740 0x20>;
187 interrupts = <0xb 0x8>;
188 clocks = <&clks MPC512x_CLK_I2C>;
189 clock-names = "ipg";
190 };
191
192 i2ccontrol@1760 {
193 compatible = "fsl,mpc5121-i2c-ctrl";
194 reg = <0x1760 0x8>;
195 };
196
197 diu@2100 {
198 compatible = "fsl,mpc5121-diu";
199 reg = <0x2100 0x100>;
200 interrupts = <64 0x8>;
201 clocks = <&clks MPC512x_CLK_DIU>;
202 clock-names = "ipg";
203 };
204
205 mdio@2800 {
206 compatible = "fsl,mpc5121-fec-mdio";
207 reg = <0x2800 0x800>;
208 #address-cells = <1>;
209 #size-cells = <0>;
210 phy0: ethernet-phy@0 {
211 reg = <1>;
212 };
213 };
214
215 eth0: ethernet@2800 {
216 compatible = "fsl,mpc5125-fec";
217 reg = <0x2800 0x800>;
218 local-mac-address = [ 00 00 00 00 00 00 ];
219 interrupts = <4 0x8>;
220 phy-handle = < &phy0 >;
221 phy-connection-type = "rmii";
222 clocks = <&clks MPC512x_CLK_FEC>;
223 clock-names = "per";
224 };
225
226 // IO control
227 ioctl@a000 {
228 compatible = "fsl,mpc5125-ioctl";
229 reg = <0xA000 0x1000>;
230 };
231
232 // disable USB1 port
233 // TODO:
234 // correct pinmux config and fix USB3320 ulpi dependency
235 // before re-enabling it
236 usb@3000 {
237 compatible = "fsl,mpc5121-usb2-dr";
238 reg = <0x3000 0x400>;
239 #address-cells = <1>;
240 #size-cells = <0>;
241 interrupts = <43 0x8>;
242 dr_mode = "host";
243 phy_type = "ulpi";
244 clocks = <&clks MPC512x_CLK_USB1>;
245 clock-names = "ipg";
246 status = "disabled";
247 };
248
249 sclpc@10100 {
250 compatible = "fsl,mpc512x-lpbfifo";
251 reg = <0x10100 0x50>;
252 interrupts = <7 0x8>;
253 dmas = <&dma0 26>;
254 dma-names = "rx-tx";
255 };
256
257 // 5125 PSCs are not 52xx or 5121 PSC compatible
258 // PSC1 uart0 aka ttyPSC0
259 serial@11100 {
260 compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
261 reg = <0x11100 0x100>;
262 interrupts = <40 0x8>;
263 fsl,rx-fifo-size = <16>;
264 fsl,tx-fifo-size = <16>;
265 clocks = <&clks MPC512x_CLK_PSC1>,
266 <&clks MPC512x_CLK_PSC1_MCLK>;
267 clock-names = "ipg", "mclk";
268 };
269
270 // PSC9 uart1 aka ttyPSC1
271 serial@11900 {
272 compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
273 reg = <0x11900 0x100>;
274 interrupts = <40 0x8>;
275 fsl,rx-fifo-size = <16>;
276 fsl,tx-fifo-size = <16>;
277 clocks = <&clks MPC512x_CLK_PSC9>,
278 <&clks MPC512x_CLK_PSC9_MCLK>;
279 clock-names = "ipg", "mclk";
280 };
281
282 pscfifo@11f00 {
283 compatible = "fsl,mpc5121-psc-fifo";
284 reg = <0x11f00 0x100>;
285 interrupts = <40 0x8>;
286 clocks = <&clks MPC512x_CLK_PSC_FIFO>;
287 clock-names = "ipg";
288 };
289
290 dma0: dma@14000 {
291 compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2"
292 reg = <0x14000 0x1800>;
293 interrupts = <65 0x8>;
294 #dma-cells = <1>;
295 };
296 };
297};