Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright (C) 2001,2002,2005 Broadcom Corporation
4 * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
5 */
6
7/*
8 * BCM1x80/1x55-specific PCI support
9 *
10 * This module provides the glue between Linux's PCI subsystem
11 * and the hardware. We basically provide glue for accessing
12 * configuration space, and set up the translation for I/O
13 * space accesses.
14 *
15 * To access configuration space, we use ioremap. In the 32-bit
16 * kernel, this consumes either 4 or 8 page table pages, and 16MB of
17 * kernel mapped memory. Hopefully neither of these should be a huge
18 * problem.
19 *
20 * XXX: AT THIS TIME, ONLY the NATIVE PCI-X INTERFACE IS SUPPORTED.
21 */
22#include <linux/types.h>
23#include <linux/pci.h>
24#include <linux/kernel.h>
25#include <linux/init.h>
26#include <linux/mm.h>
27#include <linux/console.h>
28#include <linux/tty.h>
29#include <linux/vt.h>
30
31#include <asm/sibyte/bcm1480_regs.h>
32#include <asm/sibyte/bcm1480_scd.h>
33#include <asm/sibyte/board.h>
34#include <asm/io.h>
35
36/*
37 * Macros for calculating offsets into config space given a device
38 * structure or dev/fun/reg
39 */
40#define CFGOFFSET(bus, devfn, where) (((bus)<<16)+((devfn)<<8)+(where))
41#define CFGADDR(bus, devfn, where) CFGOFFSET((bus)->number, (devfn), where)
42
43static void *cfg_space;
44
45#define PCI_BUS_ENABLED 1
46#define PCI_DEVICE_MODE 2
47
48static int bcm1480_bus_status;
49
50#define PCI_BRIDGE_DEVICE 0
51
52/*
53 * Read/write 32-bit values in config space.
54 */
55static inline u32 READCFG32(u32 addr)
56{
57 return *(u32 *)(cfg_space + (addr&~3));
58}
59
60static inline void WRITECFG32(u32 addr, u32 data)
61{
62 *(u32 *)(cfg_space + (addr & ~3)) = data;
63}
64
65int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
66{
67 if (pin == 0)
68 return -1;
69
70 return K_BCM1480_INT_PCI_INTA - 1 + pin;
71}
72
73/* Do platform specific device initialization at pci_enable_device() time */
74int pcibios_plat_dev_init(struct pci_dev *dev)
75{
76 return 0;
77}
78
79/*
80 * Some checks before doing config cycles:
81 * In PCI Device Mode, hide everything on bus 0 except the LDT host
82 * bridge. Otherwise, access is controlled by bridge MasterEn bits.
83 */
84static int bcm1480_pci_can_access(struct pci_bus *bus, int devfn)
85{
86 u32 devno;
87
88 if (!(bcm1480_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
89 return 0;
90
91 if (bus->number == 0) {
92 devno = PCI_SLOT(devfn);
93 if (bcm1480_bus_status & PCI_DEVICE_MODE)
94 return 0;
95 else
96 return 1;
97 } else
98 return 1;
99}
100
101/*
102 * Read/write access functions for various sizes of values
103 * in config space. Return all 1's for disallowed accesses
104 * for a kludgy but adequate simulation of master aborts.
105 */
106
107static int bcm1480_pcibios_read(struct pci_bus *bus, unsigned int devfn,
108 int where, int size, u32 * val)
109{
110 u32 data = 0;
111
112 if ((size == 2) && (where & 1))
113 return PCIBIOS_BAD_REGISTER_NUMBER;
114 else if ((size == 4) && (where & 3))
115 return PCIBIOS_BAD_REGISTER_NUMBER;
116
117 if (bcm1480_pci_can_access(bus, devfn))
118 data = READCFG32(CFGADDR(bus, devfn, where));
119 else
120 data = 0xFFFFFFFF;
121
122 if (size == 1)
123 *val = (data >> ((where & 3) << 3)) & 0xff;
124 else if (size == 2)
125 *val = (data >> ((where & 3) << 3)) & 0xffff;
126 else
127 *val = data;
128
129 return PCIBIOS_SUCCESSFUL;
130}
131
132static int bcm1480_pcibios_write(struct pci_bus *bus, unsigned int devfn,
133 int where, int size, u32 val)
134{
135 u32 cfgaddr = CFGADDR(bus, devfn, where);
136 u32 data = 0;
137
138 if ((size == 2) && (where & 1))
139 return PCIBIOS_BAD_REGISTER_NUMBER;
140 else if ((size == 4) && (where & 3))
141 return PCIBIOS_BAD_REGISTER_NUMBER;
142
143 if (!bcm1480_pci_can_access(bus, devfn))
144 return PCIBIOS_BAD_REGISTER_NUMBER;
145
146 data = READCFG32(cfgaddr);
147
148 if (size == 1)
149 data = (data & ~(0xff << ((where & 3) << 3))) |
150 (val << ((where & 3) << 3));
151 else if (size == 2)
152 data = (data & ~(0xffff << ((where & 3) << 3))) |
153 (val << ((where & 3) << 3));
154 else
155 data = val;
156
157 WRITECFG32(cfgaddr, data);
158
159 return PCIBIOS_SUCCESSFUL;
160}
161
162struct pci_ops bcm1480_pci_ops = {
163 .read = bcm1480_pcibios_read,
164 .write = bcm1480_pcibios_write,
165};
166
167static struct resource bcm1480_mem_resource = {
168 .name = "BCM1480 PCI MEM",
169 .start = A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES,
170 .end = A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES + 0xfffffffUL,
171 .flags = IORESOURCE_MEM,
172};
173
174static struct resource bcm1480_io_resource = {
175 .name = "BCM1480 PCI I/O",
176 .start = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
177 .end = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES + 0x1ffffffUL,
178 .flags = IORESOURCE_IO,
179};
180
181struct pci_controller bcm1480_controller = {
182 .pci_ops = &bcm1480_pci_ops,
183 .mem_resource = &bcm1480_mem_resource,
184 .io_resource = &bcm1480_io_resource,
185 .io_offset = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
186};
187
188
189static int __init bcm1480_pcibios_init(void)
190{
191 uint32_t cmdreg;
192 uint64_t reg;
193
194 /* CFE will assign PCI resources */
195 pci_set_flags(PCI_PROBE_ONLY);
196
197 /* Avoid ISA compat ranges. */
198 PCIBIOS_MIN_IO = 0x00008000UL;
199 PCIBIOS_MIN_MEM = 0x01000000UL;
200
201 /* Set I/O resource limits. - unlimited for now to accommodate HT */
202 ioport_resource.end = 0xffffffffUL;
203 iomem_resource.end = 0xffffffffUL;
204
205 cfg_space = ioremap(A_BCM1480_PHYS_PCI_CFG_MATCH_BITS, 16*1024*1024);
206
207 /*
208 * See if the PCI bus has been configured by the firmware.
209 */
210 reg = __raw_readq(IOADDR(A_SCD_SYSTEM_CFG));
211 if (!(reg & M_BCM1480_SYS_PCI_HOST)) {
212 bcm1480_bus_status |= PCI_DEVICE_MODE;
213 } else {
214 cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
215 PCI_COMMAND));
216 if (!(cmdreg & PCI_COMMAND_MASTER)) {
217 printk
218 ("PCI: Skipping PCI probe. Bus is not initialized.\n");
219 iounmap(cfg_space);
220 return 1; /* XXX */
221 }
222 bcm1480_bus_status |= PCI_BUS_ENABLED;
223 }
224
225 /* turn on ExpMemEn */
226 cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
227 WRITECFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40),
228 cmdreg | 0x10);
229 cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
230
231 /*
232 * Establish mappings in KSEG2 (kernel virtual) to PCI I/O
233 * space. Use "match bytes" policy to make everything look
234 * little-endian. So, you need to also set
235 * CONFIG_SWAP_IO_SPACE, but this is the combination that
236 * works correctly with most of Linux's drivers.
237 * XXX ehs: Should this happen in PCI Device mode?
238 */
239
240 bcm1480_controller.io_map_base = (unsigned long)
241 ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536);
242 bcm1480_controller.io_map_base -= bcm1480_controller.io_offset;
243 set_io_port_base(bcm1480_controller.io_map_base);
244
245 register_pci_controller(&bcm1480_controller);
246
247#ifdef CONFIG_VGA_CONSOLE
248 console_lock();
249 do_take_over_console(&vga_con, 0, MAX_NR_CONSOLES-1, 1);
250 console_unlock();
251#endif
252 return 0;
253}
254
255arch_initcall(bcm1480_pcibios_init);
1/*
2 * Copyright (C) 2001,2002,2005 Broadcom Corporation
3 * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
4 *
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version 2
8 * of the License, or (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 */
19
20/*
21 * BCM1x80/1x55-specific PCI support
22 *
23 * This module provides the glue between Linux's PCI subsystem
24 * and the hardware. We basically provide glue for accessing
25 * configuration space, and set up the translation for I/O
26 * space accesses.
27 *
28 * To access configuration space, we use ioremap. In the 32-bit
29 * kernel, this consumes either 4 or 8 page table pages, and 16MB of
30 * kernel mapped memory. Hopefully neither of these should be a huge
31 * problem.
32 *
33 * XXX: AT THIS TIME, ONLY the NATIVE PCI-X INTERFACE IS SUPPORTED.
34 */
35#include <linux/types.h>
36#include <linux/pci.h>
37#include <linux/kernel.h>
38#include <linux/init.h>
39#include <linux/mm.h>
40#include <linux/console.h>
41#include <linux/tty.h>
42#include <linux/vt.h>
43
44#include <asm/sibyte/bcm1480_regs.h>
45#include <asm/sibyte/bcm1480_scd.h>
46#include <asm/sibyte/board.h>
47#include <asm/io.h>
48
49/*
50 * Macros for calculating offsets into config space given a device
51 * structure or dev/fun/reg
52 */
53#define CFGOFFSET(bus, devfn, where) (((bus)<<16)+((devfn)<<8)+(where))
54#define CFGADDR(bus, devfn, where) CFGOFFSET((bus)->number, (devfn), where)
55
56static void *cfg_space;
57
58#define PCI_BUS_ENABLED 1
59#define PCI_DEVICE_MODE 2
60
61static int bcm1480_bus_status;
62
63#define PCI_BRIDGE_DEVICE 0
64
65/*
66 * Read/write 32-bit values in config space.
67 */
68static inline u32 READCFG32(u32 addr)
69{
70 return *(u32 *)(cfg_space + (addr&~3));
71}
72
73static inline void WRITECFG32(u32 addr, u32 data)
74{
75 *(u32 *)(cfg_space + (addr & ~3)) = data;
76}
77
78int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
79{
80 if (pin == 0)
81 return -1;
82
83 return K_BCM1480_INT_PCI_INTA - 1 + pin;
84}
85
86/* Do platform specific device initialization at pci_enable_device() time */
87int pcibios_plat_dev_init(struct pci_dev *dev)
88{
89 return 0;
90}
91
92/*
93 * Some checks before doing config cycles:
94 * In PCI Device Mode, hide everything on bus 0 except the LDT host
95 * bridge. Otherwise, access is controlled by bridge MasterEn bits.
96 */
97static int bcm1480_pci_can_access(struct pci_bus *bus, int devfn)
98{
99 u32 devno;
100
101 if (!(bcm1480_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
102 return 0;
103
104 if (bus->number == 0) {
105 devno = PCI_SLOT(devfn);
106 if (bcm1480_bus_status & PCI_DEVICE_MODE)
107 return 0;
108 else
109 return 1;
110 } else
111 return 1;
112}
113
114/*
115 * Read/write access functions for various sizes of values
116 * in config space. Return all 1's for disallowed accesses
117 * for a kludgy but adequate simulation of master aborts.
118 */
119
120static int bcm1480_pcibios_read(struct pci_bus *bus, unsigned int devfn,
121 int where, int size, u32 * val)
122{
123 u32 data = 0;
124
125 if ((size == 2) && (where & 1))
126 return PCIBIOS_BAD_REGISTER_NUMBER;
127 else if ((size == 4) && (where & 3))
128 return PCIBIOS_BAD_REGISTER_NUMBER;
129
130 if (bcm1480_pci_can_access(bus, devfn))
131 data = READCFG32(CFGADDR(bus, devfn, where));
132 else
133 data = 0xFFFFFFFF;
134
135 if (size == 1)
136 *val = (data >> ((where & 3) << 3)) & 0xff;
137 else if (size == 2)
138 *val = (data >> ((where & 3) << 3)) & 0xffff;
139 else
140 *val = data;
141
142 return PCIBIOS_SUCCESSFUL;
143}
144
145static int bcm1480_pcibios_write(struct pci_bus *bus, unsigned int devfn,
146 int where, int size, u32 val)
147{
148 u32 cfgaddr = CFGADDR(bus, devfn, where);
149 u32 data = 0;
150
151 if ((size == 2) && (where & 1))
152 return PCIBIOS_BAD_REGISTER_NUMBER;
153 else if ((size == 4) && (where & 3))
154 return PCIBIOS_BAD_REGISTER_NUMBER;
155
156 if (!bcm1480_pci_can_access(bus, devfn))
157 return PCIBIOS_BAD_REGISTER_NUMBER;
158
159 data = READCFG32(cfgaddr);
160
161 if (size == 1)
162 data = (data & ~(0xff << ((where & 3) << 3))) |
163 (val << ((where & 3) << 3));
164 else if (size == 2)
165 data = (data & ~(0xffff << ((where & 3) << 3))) |
166 (val << ((where & 3) << 3));
167 else
168 data = val;
169
170 WRITECFG32(cfgaddr, data);
171
172 return PCIBIOS_SUCCESSFUL;
173}
174
175struct pci_ops bcm1480_pci_ops = {
176 .read = bcm1480_pcibios_read,
177 .write = bcm1480_pcibios_write,
178};
179
180static struct resource bcm1480_mem_resource = {
181 .name = "BCM1480 PCI MEM",
182 .start = A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES,
183 .end = A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES + 0xfffffffUL,
184 .flags = IORESOURCE_MEM,
185};
186
187static struct resource bcm1480_io_resource = {
188 .name = "BCM1480 PCI I/O",
189 .start = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
190 .end = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES + 0x1ffffffUL,
191 .flags = IORESOURCE_IO,
192};
193
194struct pci_controller bcm1480_controller = {
195 .pci_ops = &bcm1480_pci_ops,
196 .mem_resource = &bcm1480_mem_resource,
197 .io_resource = &bcm1480_io_resource,
198 .io_offset = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
199};
200
201
202static int __init bcm1480_pcibios_init(void)
203{
204 uint32_t cmdreg;
205 uint64_t reg;
206
207 /* CFE will assign PCI resources */
208 pci_set_flags(PCI_PROBE_ONLY);
209
210 /* Avoid ISA compat ranges. */
211 PCIBIOS_MIN_IO = 0x00008000UL;
212 PCIBIOS_MIN_MEM = 0x01000000UL;
213
214 /* Set I/O resource limits. - unlimited for now to accommodate HT */
215 ioport_resource.end = 0xffffffffUL;
216 iomem_resource.end = 0xffffffffUL;
217
218 cfg_space = ioremap(A_BCM1480_PHYS_PCI_CFG_MATCH_BITS, 16*1024*1024);
219
220 /*
221 * See if the PCI bus has been configured by the firmware.
222 */
223 reg = __raw_readq(IOADDR(A_SCD_SYSTEM_CFG));
224 if (!(reg & M_BCM1480_SYS_PCI_HOST)) {
225 bcm1480_bus_status |= PCI_DEVICE_MODE;
226 } else {
227 cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
228 PCI_COMMAND));
229 if (!(cmdreg & PCI_COMMAND_MASTER)) {
230 printk
231 ("PCI: Skipping PCI probe. Bus is not initialized.\n");
232 iounmap(cfg_space);
233 return 1; /* XXX */
234 }
235 bcm1480_bus_status |= PCI_BUS_ENABLED;
236 }
237
238 /* turn on ExpMemEn */
239 cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
240 WRITECFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40),
241 cmdreg | 0x10);
242 cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
243
244 /*
245 * Establish mappings in KSEG2 (kernel virtual) to PCI I/O
246 * space. Use "match bytes" policy to make everything look
247 * little-endian. So, you need to also set
248 * CONFIG_SWAP_IO_SPACE, but this is the combination that
249 * works correctly with most of Linux's drivers.
250 * XXX ehs: Should this happen in PCI Device mode?
251 */
252
253 bcm1480_controller.io_map_base = (unsigned long)
254 ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536);
255 bcm1480_controller.io_map_base -= bcm1480_controller.io_offset;
256 set_io_port_base(bcm1480_controller.io_map_base);
257
258 register_pci_controller(&bcm1480_controller);
259
260#ifdef CONFIG_VGA_CONSOLE
261 console_lock();
262 do_take_over_console(&vga_con, 0, MAX_NR_CONSOLES-1, 1);
263 console_unlock();
264#endif
265 return 0;
266}
267
268arch_initcall(bcm1480_pcibios_init);