1/*
  2 * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
  3 *
  4 * This file is dual-licensed: you can use it either under the terms
  5 * of the GPL or the X11 license, at your option. Note that this dual
  6 * licensing only applies to this file, and not this project as a
  7 * whole.
  8 *
  9 *  a) This file is free software; you can redistribute it and/or
 10 *     modify it under the terms of the GNU General Public License as
 11 *     published by the Free Software Foundation; either version 2 of the
 12 *     License, or (at your option) any later version.
 13 *
 14 *     This file is distributed in the hope that it will be useful,
 15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 17 *     GNU General Public License for more details.
 18 *
 19 * Or, alternatively,
 20 *
 21 *  b) Permission is hereby granted, free of charge, to any person
 22 *     obtaining a copy of this software and associated documentation
 23 *     files (the "Software"), to deal in the Software without
 24 *     restriction, including without limitation the rights to use,
 25 *     copy, modify, merge, publish, distribute, sublicense, and/or
 26 *     sell copies of the Software, and to permit persons to whom the
 27 *     Software is furnished to do so, subject to the following
 28 *     conditions:
 29 *
 30 *     The above copyright notice and this permission notice shall be
 31 *     included in all copies or substantial portions of the Software.
 32 *
 33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 40 *     OTHER DEALINGS IN THE SOFTWARE.
 41 */
 42
 43/dts-v1/;
 44#include "sun8i-h3.dtsi"
 45#include "sunxi-common-regulators.dtsi"
 46
 47#include <dt-bindings/gpio/gpio.h>
 48#include <dt-bindings/input/input.h>
 49
 50/ {
 51	model = "Xunlong Orange Pi Lite";
 52	compatible = "xunlong,orangepi-lite", "allwinner,sun8i-h3";
 53
 54	aliases {
 55		/* The H3 emac is not used so the wifi is ethernet0 */
 56		ethernet0 = &rtl8189ftv;
 57		serial0 = &uart0;
 58	};
 59
 60	chosen {
 61		stdout-path = "serial0:115200n8";
 62	};
 63
 64	connector {
 65		compatible = "hdmi-connector";
 66		type = "a";
 67
 68		port {
 69			hdmi_con_in: endpoint {
 70				remote-endpoint = <&hdmi_out_con>;
 71			};
 72		};
 73	};
 74
 75	leds {
 76		compatible = "gpio-leds";
 77
 78		pwr_led {
 79			label = "orangepi:green:pwr";
 80			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
 81			default-state = "on";
 82		};
 83
 84		status_led {
 85			label = "orangepi:red:status";
 86			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
 87		};
 88	};
 89
 90	r_gpio_keys {
 91		compatible = "gpio-keys";
 92
 93		sw4 {
 94			label = "sw4";
 95			linux,code = <BTN_0>;
 96			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
 97		};
 98	};
 99};
100
101&de {
102	status = "okay";
103};
104
105&ehci1 {
106	status = "okay";
107};
108
109&ehci2 {
110	status = "okay";
111};
112
113&hdmi {
114	status = "okay";
115};
116
117&hdmi_out {
118	hdmi_out_con: endpoint {
119		remote-endpoint = <&hdmi_con_in>;
120	};
121};
122
123&ir {
124	pinctrl-names = "default";
125	pinctrl-0 = <&r_ir_rx_pin>;
126	status = "okay";
127};
128
129&mmc0 {
130	vmmc-supply = <&reg_vcc3v3>;
131	bus-width = <4>;
132	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
133	status = "okay";
134};
135
136&mmc1 {
137	vmmc-supply = <&reg_vcc3v3>;
138	bus-width = <4>;
139	non-removable;
140	status = "okay";
141
142	/*
143	 * Explicitly define the sdio device, so that we can add an ethernet
144	 * alias for it (which e.g. makes u-boot set a mac-address).
145	 */
146	rtl8189ftv: sdio_wifi@1 {
147		reg = <1>;
148	};
149};
150
151&ohci1 {
152	status = "okay";
153};
154
155&ohci2 {
156	status = "okay";
157};
158
159&uart0 {
160	pinctrl-names = "default";
161	pinctrl-0 = <&uart0_pa_pins>;
162	status = "okay";
163};
164
165&usbphy {
166	/* USB VBUS is always on */
167	status = "okay";
168};