Loading...
1// SPDX-License-Identifier: GPL-2.0 OR MIT
2/*
3 * Copyright 2014 Carlo Caione <carlo@caione.org>
4 */
5
6#include <dt-bindings/interrupt-controller/irq.h>
7#include <dt-bindings/interrupt-controller/arm-gic.h>
8
9/ {
10 #address-cells = <1>;
11 #size-cells = <1>;
12 interrupt-parent = <&gic>;
13
14 L2: l2-cache-controller@c4200000 {
15 compatible = "arm,pl310-cache";
16 reg = <0xc4200000 0x1000>;
17 cache-unified;
18 cache-level = <2>;
19 };
20
21 soc {
22 compatible = "simple-bus";
23 #address-cells = <1>;
24 #size-cells = <1>;
25 ranges;
26
27 cbus: cbus@c1100000 {
28 compatible = "simple-bus";
29 reg = <0xc1100000 0x200000>;
30 #address-cells = <1>;
31 #size-cells = <1>;
32 ranges = <0x0 0xc1100000 0x200000>;
33
34 hhi: system-controller@4000 {
35 compatible = "amlogic,meson-hhi-sysctrl",
36 "simple-mfd",
37 "syscon";
38 reg = <0x4000 0x400>;
39 };
40
41 assist: assist@7c00 {
42 compatible = "amlogic,meson-mx-assist", "syscon";
43 reg = <0x7c00 0x200>;
44 };
45
46 hwrng: rng@8100 {
47 compatible = "amlogic,meson-rng";
48 reg = <0x8100 0x8>;
49 };
50
51 uart_A: serial@84c0 {
52 compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
53 reg = <0x84c0 0x18>;
54 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
55 status = "disabled";
56 };
57
58 uart_B: serial@84dc {
59 compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
60 reg = <0x84dc 0x18>;
61 interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
62 status = "disabled";
63 };
64
65 i2c_A: i2c@8500 {
66 compatible = "amlogic,meson6-i2c";
67 reg = <0x8500 0x20>;
68 interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
69 #address-cells = <1>;
70 #size-cells = <0>;
71 status = "disabled";
72 };
73
74 pwm_ab: pwm@8550 {
75 compatible = "amlogic,meson-pwm";
76 reg = <0x8550 0x10>;
77 #pwm-cells = <3>;
78 status = "disabled";
79 };
80
81 pwm_cd: pwm@8650 {
82 compatible = "amlogic,meson-pwm";
83 reg = <0x8650 0x10>;
84 #pwm-cells = <3>;
85 status = "disabled";
86 };
87
88 saradc: adc@8680 {
89 compatible = "amlogic,meson-saradc";
90 reg = <0x8680 0x34>;
91 #io-channel-cells = <1>;
92 interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
93 status = "disabled";
94 };
95
96 uart_C: serial@8700 {
97 compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
98 reg = <0x8700 0x18>;
99 interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
100 status = "disabled";
101 };
102
103 i2c_B: i2c@87c0 {
104 compatible = "amlogic,meson6-i2c";
105 reg = <0x87c0 0x20>;
106 interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
107 #address-cells = <1>;
108 #size-cells = <0>;
109 status = "disabled";
110 };
111
112 usb0_phy: phy@8800 {
113 compatible = "amlogic,meson-mx-usb2-phy";
114 #phy-cells = <0>;
115 reg = <0x8800 0x20>;
116 status = "disabled";
117 };
118
119 usb1_phy: phy@8820 {
120 compatible = "amlogic,meson-mx-usb2-phy";
121 #phy-cells = <0>;
122 reg = <0x8820 0x20>;
123 status = "disabled";
124 };
125
126 sdio: mmc@8c20 {
127 compatible = "amlogic,meson-mx-sdio";
128 reg = <0x8c20 0x20>;
129 interrupts = <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>;
130 #address-cells = <1>;
131 #size-cells = <0>;
132 status = "disabled";
133 };
134
135 spifc: spi@8c80 {
136 compatible = "amlogic,meson6-spifc";
137 reg = <0x8c80 0x80>;
138 #address-cells = <1>;
139 #size-cells = <0>;
140 status = "disabled";
141 };
142
143 gpio_intc: interrupt-controller@9880 {
144 compatible = "amlogic,meson-gpio-intc";
145 reg = <0x9880 0x10>;
146 interrupt-controller;
147 #interrupt-cells = <2>;
148 amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
149 status = "disabled";
150 };
151
152 wdt: watchdog@9900 {
153 compatible = "amlogic,meson6-wdt";
154 reg = <0x9900 0x8>;
155 interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
156 };
157
158 timer_abcde: timer@9940 {
159 compatible = "amlogic,meson6-timer";
160 reg = <0x9940 0x18>;
161 interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>,
162 <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>,
163 <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
164 <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
165 };
166 };
167
168 periph: bus@c4300000 {
169 compatible = "simple-bus";
170 reg = <0xc4300000 0x10000>;
171 #address-cells = <1>;
172 #size-cells = <1>;
173 ranges = <0x0 0xc4300000 0x10000>;
174
175 gic: interrupt-controller@1000 {
176 compatible = "arm,cortex-a9-gic";
177 reg = <0x1000 0x1000>,
178 <0x100 0x100>;
179 interrupt-controller;
180 #interrupt-cells = <3>;
181 };
182 };
183
184 aobus: aobus@c8100000 {
185 compatible = "simple-bus";
186 reg = <0xc8100000 0x100000>;
187 #address-cells = <1>;
188 #size-cells = <1>;
189 ranges = <0x0 0xc8100000 0x100000>;
190
191 ir_receiver: ir-receiver@480 {
192 compatible= "amlogic,meson6-ir";
193 reg = <0x480 0x20>;
194 interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
195 status = "disabled";
196 };
197
198 uart_AO: serial@4c0 {
199 compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
200 reg = <0x4c0 0x18>;
201 interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
202 status = "disabled";
203 };
204
205 i2c_AO: i2c@500 {
206 compatible = "amlogic,meson6-i2c";
207 reg = <0x500 0x20>;
208 interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>;
209 #address-cells = <1>;
210 #size-cells = <0>;
211 status = "disabled";
212 };
213
214 rtc: rtc@740 {
215 compatible = "amlogic,meson6-rtc";
216 reg = <0x740 0x14>;
217 interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
218 #address-cells = <1>;
219 #size-cells = <1>;
220 status = "disabled";
221 };
222 };
223
224 usb0: usb@c9040000 {
225 compatible = "snps,dwc2";
226 #address-cells = <1>;
227 #size-cells = <0>;
228 reg = <0xc9040000 0x40000>;
229 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
230 phys = <&usb0_phy>;
231 phy-names = "usb2-phy";
232 dr_mode = "host";
233 status = "disabled";
234 };
235
236 usb1: usb@c90c0000 {
237 compatible = "snps,dwc2";
238 #address-cells = <1>;
239 #size-cells = <0>;
240 reg = <0xc90c0000 0x40000>;
241 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
242 phys = <&usb1_phy>;
243 phy-names = "usb2-phy";
244 dr_mode = "host";
245 status = "disabled";
246 };
247
248 ethmac: ethernet@c9410000 {
249 compatible = "amlogic,meson6-dwmac", "snps,dwmac";
250 reg = <0xc9410000 0x10000
251 0xc1108108 0x4>;
252 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
253 interrupt-names = "macirq";
254 status = "disabled";
255 };
256
257 ahb_sram: sram@d9000000 {
258 compatible = "mmio-sram";
259 reg = <0xd9000000 0x20000>;
260 #address-cells = <1>;
261 #size-cells = <1>;
262 ranges = <0 0xd9000000 0x20000>;
263 };
264
265 bootrom: bootrom@d9040000 {
266 compatible = "amlogic,meson-mx-bootrom", "syscon";
267 reg = <0xd9040000 0x10000>;
268 };
269
270 secbus: secbus@da000000 {
271 compatible = "simple-bus";
272 reg = <0xda000000 0x6000>;
273 #address-cells = <1>;
274 #size-cells = <1>;
275 ranges = <0x0 0xda000000 0x6000>;
276
277 efuse: nvmem@0 {
278 compatible = "amlogic,meson6-efuse";
279 reg = <0x0 0x2000>;
280 #address-cells = <1>;
281 #size-cells = <1>;
282 };
283 };
284 };
285}; /* end of / */
1/*
2 * Copyright 2014 Carlo Caione <carlo@caione.org>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This library is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This library is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public
20 * License along with this library; if not, write to the Free
21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 * MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 * b) Permission is hereby granted, free of charge, to any person
27 * obtaining a copy of this software and associated documentation
28 * files (the "Software"), to deal in the Software without
29 * restriction, including without limitation the rights to use,
30 * copy, modify, merge, publish, distribute, sublicense, and/or
31 * sell copies of the Software, and to permit persons to whom the
32 * Software is furnished to do so, subject to the following
33 * conditions:
34 *
35 * The above copyright notice and this permission notice shall be
36 * included in all copies or substantial portions of the Software.
37 *
38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 * OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48/include/ "skeleton.dtsi"
49
50/ {
51 interrupt-parent = <&gic>;
52
53 L2: l2-cache-controller@c4200000 {
54 compatible = "arm,pl310-cache";
55 reg = <0xc4200000 0x1000>;
56 cache-unified;
57 cache-level = <2>;
58 };
59
60 gic: interrupt-controller@c4301000 {
61 compatible = "arm,cortex-a9-gic";
62 reg = <0xc4301000 0x1000>,
63 <0xc4300100 0x0100>;
64 interrupt-controller;
65 #interrupt-cells = <3>;
66 };
67
68 timer@c1109940 {
69 compatible = "amlogic,meson6-timer";
70 reg = <0xc1109940 0x18>;
71 interrupts = <0 10 1>;
72 };
73
74 soc {
75 compatible = "simple-bus";
76 #address-cells = <1>;
77 #size-cells = <1>;
78 ranges;
79
80 wdt: watchdog@c1109900 {
81 compatible = "amlogic,meson6-wdt";
82 reg = <0xc1109900 0x8>;
83 interrupts = <0 0 1>;
84 };
85
86 uart_AO: serial@c81004c0 {
87 compatible = "amlogic,meson-uart";
88 reg = <0xc81004c0 0x18>;
89 interrupts = <0 90 1>;
90 clocks = <&clk81>;
91 status = "disabled";
92 };
93
94 uart_A: serial@c11084c0 {
95 compatible = "amlogic,meson-uart";
96 reg = <0xc11084c0 0x18>;
97 interrupts = <0 26 1>;
98 clocks = <&clk81>;
99 status = "disabled";
100 };
101
102 uart_B: serial@c11084dc {
103 compatible = "amlogic,meson-uart";
104 reg = <0xc11084dc 0x18>;
105 interrupts = <0 75 1>;
106 clocks = <&clk81>;
107 status = "disabled";
108 };
109
110 uart_C: serial@c1108700 {
111 compatible = "amlogic,meson-uart";
112 reg = <0xc1108700 0x18>;
113 interrupts = <0 93 1>;
114 clocks = <&clk81>;
115 status = "disabled";
116 };
117
118 i2c_AO: i2c@c8100500 {
119 compatible = "amlogic,meson6-i2c";
120 reg = <0xc8100500 0x20>;
121 interrupts = <0 92 1>;
122 clocks = <&clk81>;
123 #address-cells = <1>;
124 #size-cells = <0>;
125 status = "disabled";
126 };
127
128 i2c_A: i2c@c1108500 {
129 compatible = "amlogic,meson6-i2c";
130 reg = <0xc1108500 0x20>;
131 interrupts = <0 21 1>;
132 clocks = <&clk81>;
133 #address-cells = <1>;
134 #size-cells = <0>;
135 status = "disabled";
136 };
137
138 i2c_B: i2c@c11087c0 {
139 compatible = "amlogic,meson6-i2c";
140 reg = <0xc11087c0 0x20>;
141 interrupts = <0 128 1>;
142 clocks = <&clk81>;
143 #address-cells = <1>;
144 #size-cells = <0>;
145 status = "disabled";
146 };
147
148 ir_receiver: ir-receiver@c8100480 {
149 compatible= "amlogic,meson6-ir";
150 reg = <0xc8100480 0x20>;
151 interrupts = <0 15 1>;
152 status = "disabled";
153 };
154
155 spifc: spi@c1108c80 {
156 compatible = "amlogic,meson6-spifc";
157 reg = <0xc1108c80 0x80>;
158 #address-cells = <1>;
159 #size-cells = <0>;
160 clocks = <&clk81>;
161 status = "disabled";
162 };
163
164 ethmac: ethernet@c9410000 {
165 compatible = "amlogic,meson6-dwmac", "snps,dwmac";
166 reg = <0xc9410000 0x10000
167 0xc1108108 0x4>;
168 interrupts = <0 8 1>;
169 interrupt-names = "macirq";
170 clocks = <&clk81>;
171 clock-names = "stmmaceth";
172 status = "disabled";
173 };
174 };
175}; /* end of / */