1// SPDX-License-Identifier: GPL-2.0
  2/dts-v1/;
  3
  4#include "kirkwood.dtsi"
  5#include "kirkwood-6281.dtsi"
  6
  7/ {
  8	model = "Globalscale Technologies Guruplug Server Plus";
  9	compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 10
 11	memory {
 12		device_type = "memory";
 13		reg = <0x00000000 0x20000000>;
 14	};
 15
 16	chosen {
 17		bootargs = "console=ttyS0,115200n8 earlyprintk";
 18		stdout-path = &uart0;
 19	};
 20
 21	ocp@f1000000 {
 22		pinctrl: pin-controller@10000 {
 23			pmx_led_health_r: pmx-led-health-r {
 24				marvell,pins = "mpp46";
 25				marvell,function = "gpio";
 26			};
 27			pmx_led_health_g: pmx-led-health-g {
 28				marvell,pins = "mpp47";
 29				marvell,function = "gpio";
 30			};
 31			pmx_led_wmode_r: pmx-led-wmode-r {
 32				marvell,pins = "mpp48";
 33				marvell,function = "gpio";
 34			};
 35			pmx_led_wmode_g: pmx-led-wmode-g {
 36				marvell,pins = "mpp49";
 37				marvell,function = "gpio";
 38			};
 39		};
 40		serial@12000 {
 41			status = "ok";
 42		};
 43
 44		sata@80000 {
 45			status = "okay";
 46			nr-ports = <1>;
 47		};
 48
 49		/* AzureWave AW-GH381 WiFi/BT */
 50		mvsdio@90000 {
 51			status = "okay";
 52			non-removable;
 53		};
 54	};
 55
 56	gpio-leds {
 57		compatible = "gpio-leds";
 58		pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
 59			      &pmx_led_wmode_r &pmx_led_wmode_g >;
 60		pinctrl-names = "default";
 61
 62		health-r {
 63			label = "guruplug:red:health";
 64			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 65		};
 66		health-g {
 67			label = "guruplug:green:health";
 68			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 69		};
 70		wmode-r {
 71			label = "guruplug:red:wmode";
 72			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 73		};
 74		wmode-g {
 75			label = "guruplug:green:wmode";
 76			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 77		};
 78	};
 79};
 80
 81&nand {
 82	status = "okay";
 83
 84	partition@0 {
 85		label = "u-boot";
 86		reg = <0x00000000 0x00100000>;
 87		read-only;
 88	};
 89
 90	partition@100000 {
 91		label = "uImage";
 92		reg = <0x00100000 0x00400000>;
 93	};
 94
 95	partition@500000 {
 96		label = "data";
 97		reg = <0x00500000 0x1fb00000>;
 98	};
 99};
100
101&mdio {
102	status = "okay";
103
104	ethphy0: ethernet-phy@0 {
105		/* Marvell 88E1121R */
106		compatible = "ethernet-phy-id0141.0cb0",
107		             "ethernet-phy-ieee802.3-c22";
108		reg = <0>;
109	};
110
111	ethphy1: ethernet-phy@1 {
112		/* Marvell 88E1121R */
113		compatible = "ethernet-phy-id0141.0cb0",
114		             "ethernet-phy-ieee802.3-c22";
115		reg = <1>;
116	};
117};
118
119&eth0 {
120	status = "okay";
121	ethernet0-port@0 {
122		phy-handle = <&ethphy0>;
123		phy-connection-type = "rgmii-id";
124	};
125};
126
127&eth1 {
128	status = "okay";
129	ethernet1-port@0 {
130		phy-handle = <&ethphy1>;
131		phy-connection-type = "rgmii-id";
132	};
133};

 
  1/dts-v1/;
  2
  3#include "kirkwood.dtsi"
  4#include "kirkwood-6281.dtsi"
  5
  6/ {
  7	model = "Globalscale Technologies Guruplug Server Plus";
  8	compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
  9
 10	memory {
 11		device_type = "memory";
 12		reg = <0x00000000 0x20000000>;
 13	};
 14
 15	chosen {
 16		bootargs = "console=ttyS0,115200n8 earlyprintk";
 17		stdout-path = &uart0;
 18	};
 19
 20	ocp@f1000000 {
 21		pinctrl: pin-controller@10000 {
 22			pmx_led_health_r: pmx-led-health-r {
 23				marvell,pins = "mpp46";
 24				marvell,function = "gpio";
 25			};
 26			pmx_led_health_g: pmx-led-health-g {
 27				marvell,pins = "mpp47";
 28				marvell,function = "gpio";
 29			};
 30			pmx_led_wmode_r: pmx-led-wmode-r {
 31				marvell,pins = "mpp48";
 32				marvell,function = "gpio";
 33			};
 34			pmx_led_wmode_g: pmx-led-wmode-g {
 35				marvell,pins = "mpp49";
 36				marvell,function = "gpio";
 37			};
 38		};
 39		serial@12000 {
 40			status = "ok";
 41		};
 42
 43		sata@80000 {
 44			status = "okay";
 45			nr-ports = <1>;
 46		};
 47
 48		/* AzureWave AW-GH381 WiFi/BT */
 49		mvsdio@90000 {
 50			status = "okay";
 51			non-removable;
 52		};
 53	};
 54
 55	gpio-leds {
 56		compatible = "gpio-leds";
 57		pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
 58			      &pmx_led_wmode_r &pmx_led_wmode_g >;
 59		pinctrl-names = "default";
 60
 61		health-r {
 62			label = "guruplug:red:health";
 63			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 64		};
 65		health-g {
 66			label = "guruplug:green:health";
 67			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 68		};
 69		wmode-r {
 70			label = "guruplug:red:wmode";
 71			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 72		};
 73		wmode-g {
 74			label = "guruplug:green:wmode";
 75			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 76		};
 77	};
 78};
 79
 80&nand {
 81	status = "okay";
 82
 83	partition@0 {
 84		label = "u-boot";
 85		reg = <0x00000000 0x00100000>;
 86		read-only;
 87	};
 88
 89	partition@100000 {
 90		label = "uImage";
 91		reg = <0x00100000 0x00400000>;
 92	};
 93
 94	partition@500000 {
 95		label = "data";
 96		reg = <0x00500000 0x1fb00000>;
 97	};
 98};
 99
100&mdio {
101	status = "okay";
102
103	ethphy0: ethernet-phy@0 {
104		/* Marvell 88E1121R */
105		compatible = "ethernet-phy-id0141.0cb0",
106		             "ethernet-phy-ieee802.3-c22";
107		reg = <0>;
108	};
109
110	ethphy1: ethernet-phy@1 {
111		/* Marvell 88E1121R */
112		compatible = "ethernet-phy-id0141.0cb0",
113		             "ethernet-phy-ieee802.3-c22";
114		reg = <1>;
115	};
116};
117
118&eth0 {
119	status = "okay";
120	ethernet0-port@0 {
121		phy-handle = <&ethphy0>;
122		phy-connection-type = "rgmii-id";
123	};
124};
125
126&eth1 {
127	status = "okay";
128	ethernet1-port@0 {
129		phy-handle = <&ethphy1>;
130		phy-connection-type = "rgmii-id";
131	};
132};