1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
  2/*
  3 * Copyright 2016 Luxul Inc.
  4 */
  5
  6/dts-v1/;
  7
  8#include "bcm47094.dtsi"
  9#include "bcm5301x-nand-cs0-bch4.dtsi"
 10
 11/ {
 12	compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
 13	model = "Luxul XWR-3100 V1";
 14
 15	chosen {
 16		bootargs = "console=ttyS0,115200 earlycon";
 17	};
 18
 19	memory@0 {
 20		device_type = "memory";
 21		reg = <0x00000000 0x08000000
 22		       0x88000000 0x08000000>;
 23	};
 24
 25	leds {
 26		compatible = "gpio-leds";
 27
 28		power	{
 29			label = "bcm53xx:green:power";
 30			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 31			linux,default-trigger = "default-on";
 32		};
 33
 34		lan3	{
 35			label = "bcm53xx:green:lan3";
 36			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 37		};
 38
 39		lan4	{
 40			label = "bcm53xx:green:lan4";
 41			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 42		};
 43
 44		wan	{
 45			label = "bcm53xx:green:wan";
 46			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 47		};
 48
 49		lan1	{
 50			label = "bcm53xx:green:lan1";
 51			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 52		};
 53
 54		lan2	{
 55			label = "bcm53xx:green:lan2";
 56			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 57		};
 58
 59		usb3	{
 60			label = "bcm53xx:green:usb3";
 61			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 62			trigger-sources = <&ohci_port1>, <&ehci_port1>,
 63					  <&xhci_port1>;
 64			linux,default-trigger = "usbport";
 65		};
 66
 67		status	{
 68			label = "bcm53xx:green:status";
 69			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 70			linux,default-trigger = "timer";
 71		};
 72
 73		2ghz {
 74			label = "bcm53xx:green:2ghz";
 75			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 76		};
 77
 78		5ghz {
 79			label = "bcm53xx:green:5ghz";
 80			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 81		};
 82	};
 83
 84	gpio-keys {
 85		compatible = "gpio-keys";
 86
 87		restart {
 88			label = "Reset";
 89			linux,code = <KEY_RESTART>;
 90			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 91		};
 92	};
 93};
 94
 95&usb3 {
 96	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 97};
 98
 99&spi_nor {
100	status = "okay";
101};
102
103&usb3_phy {
104	status = "okay";
105};