Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC
4 *
5 * Copyright (C) 2012 Atmel,
6 * 2012 Hong Xu <hong.xu@atmel.com>
7 */
8
9#include <dt-bindings/dma/at91.h>
10#include <dt-bindings/pinctrl/at91.h>
11#include <dt-bindings/interrupt-controller/irq.h>
12#include <dt-bindings/gpio/gpio.h>
13#include <dt-bindings/clock/at91.h>
14
15/ {
16 #address-cells = <1>;
17 #size-cells = <1>;
18 model = "Atmel AT91SAM9N12 SoC";
19 compatible = "atmel,at91sam9n12";
20 interrupt-parent = <&aic>;
21
22 aliases {
23 serial0 = &dbgu;
24 serial1 = &usart0;
25 serial2 = &usart1;
26 serial3 = &usart2;
27 serial4 = &usart3;
28 gpio0 = &pioA;
29 gpio1 = &pioB;
30 gpio2 = &pioC;
31 gpio3 = &pioD;
32 tcb0 = &tcb0;
33 tcb1 = &tcb1;
34 i2c0 = &i2c0;
35 i2c1 = &i2c1;
36 ssc0 = &ssc0;
37 pwm0 = &pwm0;
38 };
39 cpus {
40 #address-cells = <0>;
41 #size-cells = <0>;
42
43 cpu {
44 compatible = "arm,arm926ej-s";
45 device_type = "cpu";
46 };
47 };
48
49 memory {
50 device_type = "memory";
51 reg = <0x20000000 0x10000000>;
52 };
53
54 clocks {
55 slow_xtal: slow_xtal {
56 compatible = "fixed-clock";
57 #clock-cells = <0>;
58 clock-frequency = <0>;
59 };
60
61 main_xtal: main_xtal {
62 compatible = "fixed-clock";
63 #clock-cells = <0>;
64 clock-frequency = <0>;
65 };
66 };
67
68 sram: sram@300000 {
69 compatible = "mmio-sram";
70 reg = <0x00300000 0x8000>;
71 };
72
73 ahb {
74 compatible = "simple-bus";
75 #address-cells = <1>;
76 #size-cells = <1>;
77 ranges;
78
79 apb {
80 compatible = "simple-bus";
81 #address-cells = <1>;
82 #size-cells = <1>;
83 ranges;
84
85 aic: interrupt-controller@fffff000 {
86 #interrupt-cells = <3>;
87 compatible = "atmel,at91rm9200-aic";
88 interrupt-controller;
89 reg = <0xfffff000 0x200>;
90 atmel,external-irqs = <31>;
91 };
92
93 matrix: matrix@ffffde00 {
94 compatible = "atmel,at91sam9n12-matrix", "syscon";
95 reg = <0xffffde00 0x100>;
96 };
97
98 pmecc: ecc-engine@ffffe000 {
99 compatible = "atmel,at91sam9g45-pmecc";
100 reg = <0xffffe000 0x600>,
101 <0xffffe600 0x200>;
102 };
103
104 ramc0: ramc@ffffe800 {
105 compatible = "atmel,at91sam9g45-ddramc";
106 reg = <0xffffe800 0x200>;
107 clocks = <&ddrck>;
108 clock-names = "ddrck";
109 };
110
111 smc: smc@ffffea00 {
112 compatible = "atmel,at91sam9260-smc", "syscon";
113 reg = <0xffffea00 0x200>;
114 };
115
116 pmc: pmc@fffffc00 {
117 compatible = "atmel,at91sam9n12-pmc", "syscon";
118 reg = <0xfffffc00 0x200>;
119 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
120 interrupt-controller;
121 #address-cells = <1>;
122 #size-cells = <0>;
123 #interrupt-cells = <1>;
124
125 main_rc_osc: main_rc_osc {
126 compatible = "atmel,at91sam9x5-clk-main-rc-osc";
127 #clock-cells = <0>;
128 interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
129 clock-frequency = <12000000>;
130 clock-accuracy = <50000000>;
131 };
132
133 main_osc: main_osc {
134 compatible = "atmel,at91rm9200-clk-main-osc";
135 #clock-cells = <0>;
136 interrupts-extended = <&pmc AT91_PMC_MOSCS>;
137 clocks = <&main_xtal>;
138 };
139
140 main: mainck {
141 compatible = "atmel,at91sam9x5-clk-main";
142 #clock-cells = <0>;
143 interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
144 clocks = <&main_rc_osc>, <&main_osc>;
145 };
146
147 plla: pllack {
148 compatible = "atmel,at91rm9200-clk-pll";
149 #clock-cells = <0>;
150 interrupts-extended = <&pmc AT91_PMC_LOCKA>;
151 clocks = <&main>;
152 reg = <0>;
153 atmel,clk-input-range = <2000000 32000000>;
154 #atmel,pll-clk-output-range-cells = <4>;
155 atmel,pll-clk-output-ranges = <745000000 800000000 0 0>,
156 <695000000 750000000 1 0>,
157 <645000000 700000000 2 0>,
158 <595000000 650000000 3 0>,
159 <545000000 600000000 0 1>,
160 <495000000 555000000 1 1>,
161 <445000000 500000000 2 1>,
162 <400000000 450000000 3 1>;
163 };
164
165 plladiv: plladivck {
166 compatible = "atmel,at91sam9x5-clk-plldiv";
167 #clock-cells = <0>;
168 clocks = <&plla>;
169 };
170
171 pllb: pllbck {
172 compatible = "atmel,at91rm9200-clk-pll";
173 #clock-cells = <0>;
174 interrupts-extended = <&pmc AT91_PMC_LOCKB>;
175 clocks = <&main>;
176 reg = <1>;
177 atmel,clk-input-range = <2000000 32000000>;
178 #atmel,pll-clk-output-range-cells = <3>;
179 atmel,pll-clk-output-ranges = <30000000 100000000 0>;
180 };
181
182 mck: masterck {
183 compatible = "atmel,at91sam9x5-clk-master";
184 #clock-cells = <0>;
185 interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
186 clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>;
187 atmel,clk-output-range = <0 133333333>;
188 atmel,clk-divisors = <1 2 4 3>;
189 atmel,master-clk-have-div3-pres;
190 };
191
192 usb: usbck {
193 compatible = "atmel,at91sam9n12-clk-usb";
194 #clock-cells = <0>;
195 clocks = <&pllb>;
196 };
197
198 prog: progck {
199 compatible = "atmel,at91sam9x5-clk-programmable";
200 #address-cells = <1>;
201 #size-cells = <0>;
202 interrupt-parent = <&pmc>;
203 clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>, <&mck>;
204
205 prog0: prog0 {
206 #clock-cells = <0>;
207 reg = <0>;
208 interrupts = <AT91_PMC_PCKRDY(0)>;
209 };
210
211 prog1: prog1 {
212 #clock-cells = <0>;
213 reg = <1>;
214 interrupts = <AT91_PMC_PCKRDY(1)>;
215 };
216 };
217
218 systemck {
219 compatible = "atmel,at91rm9200-clk-system";
220 #address-cells = <1>;
221 #size-cells = <0>;
222
223 ddrck: ddrck {
224 #clock-cells = <0>;
225 reg = <2>;
226 clocks = <&mck>;
227 };
228
229 lcdck: lcdck {
230 #clock-cells = <0>;
231 reg = <3>;
232 clocks = <&mck>;
233 };
234
235 uhpck: uhpck {
236 #clock-cells = <0>;
237 reg = <6>;
238 clocks = <&usb>;
239 };
240
241 udpck: udpck {
242 #clock-cells = <0>;
243 reg = <7>;
244 clocks = <&usb>;
245 };
246
247 pck0: pck0 {
248 #clock-cells = <0>;
249 reg = <8>;
250 clocks = <&prog0>;
251 };
252
253 pck1: pck1 {
254 #clock-cells = <0>;
255 reg = <9>;
256 clocks = <&prog1>;
257 };
258 };
259
260 periphck {
261 compatible = "atmel,at91sam9x5-clk-peripheral";
262 #address-cells = <1>;
263 #size-cells = <0>;
264 clocks = <&mck>;
265
266 pioAB_clk: pioAB_clk {
267 #clock-cells = <0>;
268 reg = <2>;
269 };
270
271 pioCD_clk: pioCD_clk {
272 #clock-cells = <0>;
273 reg = <3>;
274 };
275
276 fuse_clk: fuse_clk {
277 #clock-cells = <0>;
278 reg = <4>;
279 };
280
281 usart0_clk: usart0_clk {
282 #clock-cells = <0>;
283 reg = <5>;
284 };
285
286 usart1_clk: usart1_clk {
287 #clock-cells = <0>;
288 reg = <6>;
289 };
290
291 usart2_clk: usart2_clk {
292 #clock-cells = <0>;
293 reg = <7>;
294 };
295
296 usart3_clk: usart3_clk {
297 #clock-cells = <0>;
298 reg = <8>;
299 };
300
301 twi0_clk: twi0_clk {
302 reg = <9>;
303 #clock-cells = <0>;
304 };
305
306 twi1_clk: twi1_clk {
307 #clock-cells = <0>;
308 reg = <10>;
309 };
310
311 mci0_clk: mci0_clk {
312 #clock-cells = <0>;
313 reg = <12>;
314 };
315
316 spi0_clk: spi0_clk {
317 #clock-cells = <0>;
318 reg = <13>;
319 };
320
321 spi1_clk: spi1_clk {
322 #clock-cells = <0>;
323 reg = <14>;
324 };
325
326 uart0_clk: uart0_clk {
327 #clock-cells = <0>;
328 reg = <15>;
329 };
330
331 uart1_clk: uart1_clk {
332 #clock-cells = <0>;
333 reg = <16>;
334 };
335
336 tcb_clk: tcb_clk {
337 #clock-cells = <0>;
338 reg = <17>;
339 };
340
341 pwm_clk: pwm_clk {
342 #clock-cells = <0>;
343 reg = <18>;
344 };
345
346 adc_clk: adc_clk {
347 #clock-cells = <0>;
348 reg = <19>;
349 };
350
351 dma0_clk: dma0_clk {
352 #clock-cells = <0>;
353 reg = <20>;
354 };
355
356 uhphs_clk: uhphs_clk {
357 #clock-cells = <0>;
358 reg = <22>;
359 };
360
361 udphs_clk: udphs_clk {
362 #clock-cells = <0>;
363 reg = <23>;
364 };
365
366 lcdc_clk: lcdc_clk {
367 #clock-cells = <0>;
368 reg = <25>;
369 };
370
371 sha_clk: sha_clk {
372 #clock-cells = <0>;
373 reg = <27>;
374 };
375
376 ssc0_clk: ssc0_clk {
377 #clock-cells = <0>;
378 reg = <28>;
379 };
380
381 aes_clk: aes_clk {
382 #clock-cells = <0>;
383 reg = <29>;
384 };
385
386 trng_clk: trng_clk {
387 #clock-cells = <0>;
388 reg = <30>;
389 };
390 };
391 };
392
393 rstc@fffffe00 {
394 compatible = "atmel,at91sam9g45-rstc";
395 reg = <0xfffffe00 0x10>;
396 clocks = <&clk32k>;
397 };
398
399 pit: timer@fffffe30 {
400 compatible = "atmel,at91sam9260-pit";
401 reg = <0xfffffe30 0xf>;
402 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
403 clocks = <&mck>;
404 };
405
406 shdwc@fffffe10 {
407 compatible = "atmel,at91sam9x5-shdwc";
408 reg = <0xfffffe10 0x10>;
409 clocks = <&clk32k>;
410 };
411
412 sckc@fffffe50 {
413 compatible = "atmel,at91sam9x5-sckc";
414 reg = <0xfffffe50 0x4>;
415
416 slow_osc: slow_osc {
417 compatible = "atmel,at91sam9x5-clk-slow-osc";
418 #clock-cells = <0>;
419 clocks = <&slow_xtal>;
420 };
421
422 slow_rc_osc: slow_rc_osc {
423 compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
424 #clock-cells = <0>;
425 clock-frequency = <32768>;
426 clock-accuracy = <50000000>;
427 };
428
429 clk32k: slck {
430 compatible = "atmel,at91sam9x5-clk-slow";
431 #clock-cells = <0>;
432 clocks = <&slow_rc_osc>, <&slow_osc>;
433 };
434 };
435
436 mmc0: mmc@f0008000 {
437 compatible = "atmel,hsmci";
438 reg = <0xf0008000 0x600>;
439 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
440 dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
441 dma-names = "rxtx";
442 clocks = <&mci0_clk>;
443 clock-names = "mci_clk";
444 #address-cells = <1>;
445 #size-cells = <0>;
446 status = "disabled";
447 };
448
449 tcb0: timer@f8008000 {
450 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
451 #address-cells = <1>;
452 #size-cells = <0>;
453 reg = <0xf8008000 0x100>;
454 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
455 clocks = <&tcb_clk>, <&clk32k>;
456 clock-names = "t0_clk", "slow_clk";
457 };
458
459 tcb1: timer@f800c000 {
460 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
461 #address-cells = <1>;
462 #size-cells = <0>;
463 reg = <0xf800c000 0x100>;
464 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
465 clocks = <&tcb_clk>, <&clk32k>;
466 clock-names = "t0_clk", "slow_clk";
467 };
468
469 hlcdc: hlcdc@f8038000 {
470 compatible = "atmel,at91sam9n12-hlcdc";
471 reg = <0xf8038000 0x2000>;
472 interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
473 clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
474 clock-names = "periph_clk", "sys_clk", "slow_clk";
475 status = "disabled";
476
477 hlcdc-display-controller {
478 compatible = "atmel,hlcdc-display-controller";
479 #address-cells = <1>;
480 #size-cells = <0>;
481
482 port@0 {
483 #address-cells = <1>;
484 #size-cells = <0>;
485 reg = <0>;
486 };
487 };
488
489 hlcdc_pwm: hlcdc-pwm {
490 compatible = "atmel,hlcdc-pwm";
491 pinctrl-names = "default";
492 pinctrl-0 = <&pinctrl_lcd_pwm>;
493 #pwm-cells = <3>;
494 };
495 };
496
497 dma: dma-controller@ffffec00 {
498 compatible = "atmel,at91sam9g45-dma";
499 reg = <0xffffec00 0x200>;
500 interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
501 #dma-cells = <2>;
502 clocks = <&dma0_clk>;
503 clock-names = "dma_clk";
504 };
505
506 pinctrl@fffff400 {
507 #address-cells = <1>;
508 #size-cells = <1>;
509 compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
510 ranges = <0xfffff400 0xfffff400 0x800>;
511
512 atmel,mux-mask = <
513 /* A B C */
514 0xffffffff 0xffe07983 0x00000000 /* pioA */
515 0x00040000 0x00047e0f 0x00000000 /* pioB */
516 0xfdffffff 0x07c00000 0xb83fffff /* pioC */
517 0x003fffff 0x003f8000 0x00000000 /* pioD */
518 >;
519
520 /* shared pinctrl settings */
521 dbgu {
522 pinctrl_dbgu: dbgu-0 {
523 atmel,pins =
524 <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
525 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
526 };
527 };
528
529 lcd {
530 pinctrl_lcd_base: lcd-base-0 {
531 atmel,pins =
532 <AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */
533 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */
534 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDISP */
535 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */
536 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */
537 };
538
539 pinctrl_lcd_pwm: lcd-pwm-0 {
540 atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */
541 };
542
543 pinctrl_lcd_rgb888: lcd-rgb-3 {
544 atmel,pins =
545 <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
546 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
547 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
548 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
549 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
550 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
551 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
552 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
553 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
554 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
555 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
556 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
557 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
558 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
559 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
560 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
561 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */
562 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */
563 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */
564 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */
565 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */
566 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */
567 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */
568 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */
569 };
570 };
571
572 usart0 {
573 pinctrl_usart0: usart0-0 {
574 atmel,pins =
575 <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */
576 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA0 periph A */
577 };
578
579 pinctrl_usart0_rts: usart0_rts-0 {
580 atmel,pins =
581 <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A */
582 };
583
584 pinctrl_usart0_cts: usart0_cts-0 {
585 atmel,pins =
586 <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA3 periph A */
587 };
588 };
589
590 usart1 {
591 pinctrl_usart1: usart1-0 {
592 atmel,pins =
593 <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA6 periph A with pullup */
594 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA5 periph A */
595 };
596 };
597
598 usart2 {
599 pinctrl_usart2: usart2-0 {
600 atmel,pins =
601 <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA8 periph A with pullup */
602 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA7 periph A */
603 };
604
605 pinctrl_usart2_rts: usart2_rts-0 {
606 atmel,pins =
607 <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */
608 };
609
610 pinctrl_usart2_cts: usart2_cts-0 {
611 atmel,pins =
612 <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */
613 };
614 };
615
616 usart3 {
617 pinctrl_usart3: usart3-0 {
618 atmel,pins =
619 <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC23 periph B with pullup */
620 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC22 periph B */
621 };
622
623 pinctrl_usart3_rts: usart3_rts-0 {
624 atmel,pins =
625 <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */
626 };
627
628 pinctrl_usart3_cts: usart3_cts-0 {
629 atmel,pins =
630 <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */
631 };
632 };
633
634 uart0 {
635 pinctrl_uart0: uart0-0 {
636 atmel,pins =
637 <AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* PC9 periph C with pullup */
638 AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC8 periph C */
639 };
640 };
641
642 uart1 {
643 pinctrl_uart1: uart1-0 {
644 atmel,pins =
645 <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE
646 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
647 };
648 };
649
650 nand {
651 pinctrl_nand_rb: nand-rb-0 {
652 atmel,pins =
653 <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
654 };
655
656 pinctrl_nand_cs: nand-cs-0 {
657 atmel,pins =
658 <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
659 };
660 };
661
662 mmc0 {
663 pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
664 atmel,pins =
665 <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */
666 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */
667 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA15 periph A with pullup */
668 };
669
670 pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
671 atmel,pins =
672 <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */
673 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */
674 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */
675 };
676
677 pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
678 atmel,pins =
679 <AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA11 periph B with pullup */
680 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA12 periph B with pullup */
681 AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA13 periph B with pullup */
682 AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA14 periph B with pullup */
683 };
684 };
685
686 ssc0 {
687 pinctrl_ssc0_tx: ssc0_tx-0 {
688 atmel,pins =
689 <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */
690 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */
691 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */
692 };
693
694 pinctrl_ssc0_rx: ssc0_rx-0 {
695 atmel,pins =
696 <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */
697 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */
698 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */
699 };
700 };
701
702 spi0 {
703 pinctrl_spi0: spi0-0 {
704 atmel,pins =
705 <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A SPI0_MISO pin */
706 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A SPI0_MOSI pin */
707 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */
708 };
709 };
710
711 spi1 {
712 pinctrl_spi1: spi1-0 {
713 atmel,pins =
714 <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA21 periph B SPI1_MISO pin */
715 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B SPI1_MOSI pin */
716 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */
717 };
718 };
719
720 i2c0 {
721 pinctrl_i2c0: i2c0-0 {
722 atmel,pins =
723 <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
724 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
725 };
726 };
727
728 i2c1 {
729 pinctrl_i2c1: i2c1-0 {
730 atmel,pins =
731 <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
732 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
733 };
734 };
735
736 tcb0 {
737 pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
738 atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
739 };
740
741 pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
742 atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
743 };
744
745 pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
746 atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
747 };
748
749 pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
750 atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
751 };
752
753 pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
754 atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
755 };
756
757 pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
758 atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
759 };
760
761 pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
762 atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
763 };
764
765 pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
766 atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
767 };
768
769 pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
770 atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
771 };
772 };
773
774 tcb1 {
775 pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
776 atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
777 };
778
779 pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
780 atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
781 };
782
783 pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
784 atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
785 };
786
787 pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
788 atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
789 };
790
791 pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
792 atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
793 };
794
795 pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
796 atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
797 };
798
799 pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
800 atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
801 };
802
803 pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
804 atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
805 };
806
807 pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
808 atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
809 };
810 };
811
812 pioA: gpio@fffff400 {
813 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
814 reg = <0xfffff400 0x200>;
815 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
816 #gpio-cells = <2>;
817 gpio-controller;
818 interrupt-controller;
819 #interrupt-cells = <2>;
820 clocks = <&pioAB_clk>;
821 };
822
823 pioB: gpio@fffff600 {
824 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
825 reg = <0xfffff600 0x200>;
826 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
827 #gpio-cells = <2>;
828 gpio-controller;
829 interrupt-controller;
830 #interrupt-cells = <2>;
831 clocks = <&pioAB_clk>;
832 };
833
834 pioC: gpio@fffff800 {
835 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
836 reg = <0xfffff800 0x200>;
837 interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
838 #gpio-cells = <2>;
839 gpio-controller;
840 interrupt-controller;
841 #interrupt-cells = <2>;
842 clocks = <&pioCD_clk>;
843 };
844
845 pioD: gpio@fffffa00 {
846 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
847 reg = <0xfffffa00 0x200>;
848 interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
849 #gpio-cells = <2>;
850 gpio-controller;
851 interrupt-controller;
852 #interrupt-cells = <2>;
853 clocks = <&pioCD_clk>;
854 };
855 };
856
857 dbgu: serial@fffff200 {
858 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
859 reg = <0xfffff200 0x200>;
860 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
861 pinctrl-names = "default";
862 pinctrl-0 = <&pinctrl_dbgu>;
863 clocks = <&mck>;
864 clock-names = "usart";
865 status = "disabled";
866 };
867
868 ssc0: ssc@f0010000 {
869 compatible = "atmel,at91sam9g45-ssc";
870 reg = <0xf0010000 0x4000>;
871 interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
872 dmas = <&dma 0 AT91_DMA_CFG_PER_ID(21)>,
873 <&dma 0 AT91_DMA_CFG_PER_ID(22)>;
874 dma-names = "tx", "rx";
875 pinctrl-names = "default";
876 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
877 clocks = <&ssc0_clk>;
878 clock-names = "pclk";
879 status = "disabled";
880 };
881
882 usart0: serial@f801c000 {
883 compatible = "atmel,at91sam9260-usart";
884 reg = <0xf801c000 0x4000>;
885 interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
886 pinctrl-names = "default";
887 pinctrl-0 = <&pinctrl_usart0>;
888 clocks = <&usart0_clk>;
889 clock-names = "usart";
890 status = "disabled";
891 };
892
893 usart1: serial@f8020000 {
894 compatible = "atmel,at91sam9260-usart";
895 reg = <0xf8020000 0x4000>;
896 interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
897 pinctrl-names = "default";
898 pinctrl-0 = <&pinctrl_usart1>;
899 clocks = <&usart1_clk>;
900 clock-names = "usart";
901 status = "disabled";
902 };
903
904 usart2: serial@f8024000 {
905 compatible = "atmel,at91sam9260-usart";
906 reg = <0xf8024000 0x4000>;
907 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
908 pinctrl-names = "default";
909 pinctrl-0 = <&pinctrl_usart2>;
910 clocks = <&usart2_clk>;
911 clock-names = "usart";
912 status = "disabled";
913 };
914
915 usart3: serial@f8028000 {
916 compatible = "atmel,at91sam9260-usart";
917 reg = <0xf8028000 0x4000>;
918 interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
919 pinctrl-names = "default";
920 pinctrl-0 = <&pinctrl_usart3>;
921 clocks = <&usart3_clk>;
922 clock-names = "usart";
923 status = "disabled";
924 };
925
926 i2c0: i2c@f8010000 {
927 compatible = "atmel,at91sam9x5-i2c";
928 reg = <0xf8010000 0x100>;
929 interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
930 dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>,
931 <&dma 1 AT91_DMA_CFG_PER_ID(14)>;
932 dma-names = "tx", "rx";
933 #address-cells = <1>;
934 #size-cells = <0>;
935 pinctrl-names = "default";
936 pinctrl-0 = <&pinctrl_i2c0>;
937 clocks = <&twi0_clk>;
938 status = "disabled";
939 };
940
941 i2c1: i2c@f8014000 {
942 compatible = "atmel,at91sam9x5-i2c";
943 reg = <0xf8014000 0x100>;
944 interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
945 dmas = <&dma 1 AT91_DMA_CFG_PER_ID(15)>,
946 <&dma 1 AT91_DMA_CFG_PER_ID(16)>;
947 dma-names = "tx", "rx";
948 #address-cells = <1>;
949 #size-cells = <0>;
950 pinctrl-names = "default";
951 pinctrl-0 = <&pinctrl_i2c1>;
952 clocks = <&twi1_clk>;
953 status = "disabled";
954 };
955
956 spi0: spi@f0000000 {
957 #address-cells = <1>;
958 #size-cells = <0>;
959 compatible = "atmel,at91rm9200-spi";
960 reg = <0xf0000000 0x100>;
961 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
962 dmas = <&dma 1 AT91_DMA_CFG_PER_ID(1)>,
963 <&dma 1 AT91_DMA_CFG_PER_ID(2)>;
964 dma-names = "tx", "rx";
965 pinctrl-names = "default";
966 pinctrl-0 = <&pinctrl_spi0>;
967 clocks = <&spi0_clk>;
968 clock-names = "spi_clk";
969 status = "disabled";
970 };
971
972 spi1: spi@f0004000 {
973 #address-cells = <1>;
974 #size-cells = <0>;
975 compatible = "atmel,at91rm9200-spi";
976 reg = <0xf0004000 0x100>;
977 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
978 dmas = <&dma 1 AT91_DMA_CFG_PER_ID(3)>,
979 <&dma 1 AT91_DMA_CFG_PER_ID(4)>;
980 dma-names = "tx", "rx";
981 pinctrl-names = "default";
982 pinctrl-0 = <&pinctrl_spi1>;
983 clocks = <&spi1_clk>;
984 clock-names = "spi_clk";
985 status = "disabled";
986 };
987
988 watchdog@fffffe40 {
989 compatible = "atmel,at91sam9260-wdt";
990 reg = <0xfffffe40 0x10>;
991 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
992 clocks = <&clk32k>;
993 atmel,watchdog-type = "hardware";
994 atmel,reset-type = "all";
995 atmel,dbg-halt;
996 status = "disabled";
997 };
998
999 rtc@fffffeb0 {
1000 compatible = "atmel,at91rm9200-rtc";
1001 reg = <0xfffffeb0 0x40>;
1002 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
1003 clocks = <&clk32k>;
1004 status = "disabled";
1005 };
1006
1007 pwm0: pwm@f8034000 {
1008 compatible = "atmel,at91sam9rl-pwm";
1009 reg = <0xf8034000 0x300>;
1010 interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
1011 #pwm-cells = <3>;
1012 clocks = <&pwm_clk>;
1013 status = "disabled";
1014 };
1015
1016 usb1: gadget@f803c000 {
1017 compatible = "atmel,at91sam9260-udc";
1018 reg = <0xf803c000 0x4000>;
1019 interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
1020 clocks = <&udphs_clk>, <&udpck>;
1021 clock-names = "pclk", "hclk";
1022 status = "disabled";
1023 };
1024 };
1025
1026 usb0: ohci@500000 {
1027 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
1028 reg = <0x00500000 0x00100000>;
1029 interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
1030 clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
1031 clock-names = "ohci_clk", "hclk", "uhpck";
1032 status = "disabled";
1033 };
1034
1035 ebi: ebi@10000000 {
1036 compatible = "atmel,at91sam9x5-ebi";
1037 #address-cells = <2>;
1038 #size-cells = <1>;
1039 atmel,smc = <&smc>;
1040 atmel,matrix = <&matrix>;
1041 reg = <0x10000000 0x60000000>;
1042 ranges = <0x0 0x0 0x10000000 0x10000000
1043 0x1 0x0 0x20000000 0x10000000
1044 0x2 0x0 0x30000000 0x10000000
1045 0x3 0x0 0x40000000 0x10000000
1046 0x4 0x0 0x50000000 0x10000000
1047 0x5 0x0 0x60000000 0x10000000>;
1048 clocks = <&mck>;
1049 status = "disabled";
1050
1051 nand_controller: nand-controller {
1052 compatible = "atmel,at91sam9g45-nand-controller";
1053 ecc-engine = <&pmecc>;
1054 #address-cells = <2>;
1055 #size-cells = <1>;
1056 ranges;
1057 status = "disabled";
1058 };
1059 };
1060 };
1061
1062 i2c-gpio-0 {
1063 compatible = "i2c-gpio";
1064 gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
1065 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
1066 >;
1067 i2c-gpio,sda-open-drain;
1068 i2c-gpio,scl-open-drain;
1069 i2c-gpio,delay-us = <2>; /* ~100 kHz */
1070 #address-cells = <1>;
1071 #size-cells = <0>;
1072 status = "disabled";
1073 };
1074};
1/*
2 * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC
3 *
4 * Copyright (C) 2012 Atmel,
5 * 2012 Hong Xu <hong.xu@atmel.com>
6 *
7 * Licensed under GPLv2 or later.
8 */
9
10#include "skeleton.dtsi"
11#include <dt-bindings/dma/at91.h>
12#include <dt-bindings/pinctrl/at91.h>
13#include <dt-bindings/interrupt-controller/irq.h>
14#include <dt-bindings/gpio/gpio.h>
15#include <dt-bindings/clock/at91.h>
16
17/ {
18 model = "Atmel AT91SAM9N12 SoC";
19 compatible = "atmel,at91sam9n12";
20 interrupt-parent = <&aic>;
21
22 aliases {
23 serial0 = &dbgu;
24 serial1 = &usart0;
25 serial2 = &usart1;
26 serial3 = &usart2;
27 serial4 = &usart3;
28 gpio0 = &pioA;
29 gpio1 = &pioB;
30 gpio2 = &pioC;
31 gpio3 = &pioD;
32 tcb0 = &tcb0;
33 tcb1 = &tcb1;
34 i2c0 = &i2c0;
35 i2c1 = &i2c1;
36 ssc0 = &ssc0;
37 pwm0 = &pwm0;
38 };
39 cpus {
40 #address-cells = <0>;
41 #size-cells = <0>;
42
43 cpu {
44 compatible = "arm,arm926ej-s";
45 device_type = "cpu";
46 };
47 };
48
49 memory {
50 reg = <0x20000000 0x10000000>;
51 };
52
53 clocks {
54 slow_xtal: slow_xtal {
55 compatible = "fixed-clock";
56 #clock-cells = <0>;
57 clock-frequency = <0>;
58 };
59
60 main_xtal: main_xtal {
61 compatible = "fixed-clock";
62 #clock-cells = <0>;
63 clock-frequency = <0>;
64 };
65 };
66
67 sram: sram@00300000 {
68 compatible = "mmio-sram";
69 reg = <0x00300000 0x8000>;
70 };
71
72 ahb {
73 compatible = "simple-bus";
74 #address-cells = <1>;
75 #size-cells = <1>;
76 ranges;
77
78 apb {
79 compatible = "simple-bus";
80 #address-cells = <1>;
81 #size-cells = <1>;
82 ranges;
83
84 aic: interrupt-controller@fffff000 {
85 #interrupt-cells = <3>;
86 compatible = "atmel,at91rm9200-aic";
87 interrupt-controller;
88 reg = <0xfffff000 0x200>;
89 atmel,external-irqs = <31>;
90 };
91
92 ramc0: ramc@ffffe800 {
93 compatible = "atmel,at91sam9g45-ddramc";
94 reg = <0xffffe800 0x200>;
95 clocks = <&ddrck>;
96 clock-names = "ddrck";
97 };
98
99 pmc: pmc@fffffc00 {
100 compatible = "atmel,at91sam9n12-pmc", "syscon";
101 reg = <0xfffffc00 0x200>;
102 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
103 interrupt-controller;
104 #address-cells = <1>;
105 #size-cells = <0>;
106 #interrupt-cells = <1>;
107
108 main_rc_osc: main_rc_osc {
109 compatible = "atmel,at91sam9x5-clk-main-rc-osc";
110 #clock-cells = <0>;
111 interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
112 clock-frequency = <12000000>;
113 clock-accuracy = <50000000>;
114 };
115
116 main_osc: main_osc {
117 compatible = "atmel,at91rm9200-clk-main-osc";
118 #clock-cells = <0>;
119 interrupts-extended = <&pmc AT91_PMC_MOSCS>;
120 clocks = <&main_xtal>;
121 };
122
123 main: mainck {
124 compatible = "atmel,at91sam9x5-clk-main";
125 #clock-cells = <0>;
126 interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
127 clocks = <&main_rc_osc>, <&main_osc>;
128 };
129
130 plla: pllack {
131 compatible = "atmel,at91rm9200-clk-pll";
132 #clock-cells = <0>;
133 interrupts-extended = <&pmc AT91_PMC_LOCKA>;
134 clocks = <&main>;
135 reg = <0>;
136 atmel,clk-input-range = <2000000 32000000>;
137 #atmel,pll-clk-output-range-cells = <4>;
138 atmel,pll-clk-output-ranges = <745000000 800000000 0 0>,
139 <695000000 750000000 1 0>,
140 <645000000 700000000 2 0>,
141 <595000000 650000000 3 0>,
142 <545000000 600000000 0 1>,
143 <495000000 555000000 1 1>,
144 <445000000 500000000 2 1>,
145 <400000000 450000000 3 1>;
146 };
147
148 plladiv: plladivck {
149 compatible = "atmel,at91sam9x5-clk-plldiv";
150 #clock-cells = <0>;
151 clocks = <&plla>;
152 };
153
154 pllb: pllbck {
155 compatible = "atmel,at91rm9200-clk-pll";
156 #clock-cells = <0>;
157 interrupts-extended = <&pmc AT91_PMC_LOCKB>;
158 clocks = <&main>;
159 reg = <1>;
160 atmel,clk-input-range = <2000000 32000000>;
161 #atmel,pll-clk-output-range-cells = <3>;
162 atmel,pll-clk-output-ranges = <30000000 100000000 0>;
163 };
164
165 mck: masterck {
166 compatible = "atmel,at91sam9x5-clk-master";
167 #clock-cells = <0>;
168 interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
169 clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>;
170 atmel,clk-output-range = <0 133333333>;
171 atmel,clk-divisors = <1 2 4 3>;
172 atmel,master-clk-have-div3-pres;
173 };
174
175 usb: usbck {
176 compatible = "atmel,at91sam9n12-clk-usb";
177 #clock-cells = <0>;
178 clocks = <&pllb>;
179 };
180
181 prog: progck {
182 compatible = "atmel,at91sam9x5-clk-programmable";
183 #address-cells = <1>;
184 #size-cells = <0>;
185 interrupt-parent = <&pmc>;
186 clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>, <&mck>;
187
188 prog0: prog0 {
189 #clock-cells = <0>;
190 reg = <0>;
191 interrupts = <AT91_PMC_PCKRDY(0)>;
192 };
193
194 prog1: prog1 {
195 #clock-cells = <0>;
196 reg = <1>;
197 interrupts = <AT91_PMC_PCKRDY(1)>;
198 };
199 };
200
201 systemck {
202 compatible = "atmel,at91rm9200-clk-system";
203 #address-cells = <1>;
204 #size-cells = <0>;
205
206 ddrck: ddrck {
207 #clock-cells = <0>;
208 reg = <2>;
209 clocks = <&mck>;
210 };
211
212 lcdck: lcdck {
213 #clock-cells = <0>;
214 reg = <3>;
215 clocks = <&mck>;
216 };
217
218 uhpck: uhpck {
219 #clock-cells = <0>;
220 reg = <6>;
221 clocks = <&usb>;
222 };
223
224 udpck: udpck {
225 #clock-cells = <0>;
226 reg = <7>;
227 clocks = <&usb>;
228 };
229
230 pck0: pck0 {
231 #clock-cells = <0>;
232 reg = <8>;
233 clocks = <&prog0>;
234 };
235
236 pck1: pck1 {
237 #clock-cells = <0>;
238 reg = <9>;
239 clocks = <&prog1>;
240 };
241 };
242
243 periphck {
244 compatible = "atmel,at91sam9x5-clk-peripheral";
245 #address-cells = <1>;
246 #size-cells = <0>;
247 clocks = <&mck>;
248
249 pioAB_clk: pioAB_clk {
250 #clock-cells = <0>;
251 reg = <2>;
252 };
253
254 pioCD_clk: pioCD_clk {
255 #clock-cells = <0>;
256 reg = <3>;
257 };
258
259 fuse_clk: fuse_clk {
260 #clock-cells = <0>;
261 reg = <4>;
262 };
263
264 usart0_clk: usart0_clk {
265 #clock-cells = <0>;
266 reg = <5>;
267 };
268
269 usart1_clk: usart1_clk {
270 #clock-cells = <0>;
271 reg = <6>;
272 };
273
274 usart2_clk: usart2_clk {
275 #clock-cells = <0>;
276 reg = <7>;
277 };
278
279 usart3_clk: usart3_clk {
280 #clock-cells = <0>;
281 reg = <8>;
282 };
283
284 twi0_clk: twi0_clk {
285 reg = <9>;
286 #clock-cells = <0>;
287 };
288
289 twi1_clk: twi1_clk {
290 #clock-cells = <0>;
291 reg = <10>;
292 };
293
294 mci0_clk: mci0_clk {
295 #clock-cells = <0>;
296 reg = <12>;
297 };
298
299 spi0_clk: spi0_clk {
300 #clock-cells = <0>;
301 reg = <13>;
302 };
303
304 spi1_clk: spi1_clk {
305 #clock-cells = <0>;
306 reg = <14>;
307 };
308
309 uart0_clk: uart0_clk {
310 #clock-cells = <0>;
311 reg = <15>;
312 };
313
314 uart1_clk: uart1_clk {
315 #clock-cells = <0>;
316 reg = <16>;
317 };
318
319 tcb_clk: tcb_clk {
320 #clock-cells = <0>;
321 reg = <17>;
322 };
323
324 pwm_clk: pwm_clk {
325 #clock-cells = <0>;
326 reg = <18>;
327 };
328
329 adc_clk: adc_clk {
330 #clock-cells = <0>;
331 reg = <19>;
332 };
333
334 dma0_clk: dma0_clk {
335 #clock-cells = <0>;
336 reg = <20>;
337 };
338
339 uhphs_clk: uhphs_clk {
340 #clock-cells = <0>;
341 reg = <22>;
342 };
343
344 udphs_clk: udphs_clk {
345 #clock-cells = <0>;
346 reg = <23>;
347 };
348
349 lcdc_clk: lcdc_clk {
350 #clock-cells = <0>;
351 reg = <25>;
352 };
353
354 sha_clk: sha_clk {
355 #clock-cells = <0>;
356 reg = <27>;
357 };
358
359 ssc0_clk: ssc0_clk {
360 #clock-cells = <0>;
361 reg = <28>;
362 };
363
364 aes_clk: aes_clk {
365 #clock-cells = <0>;
366 reg = <29>;
367 };
368
369 trng_clk: trng_clk {
370 #clock-cells = <0>;
371 reg = <30>;
372 };
373 };
374 };
375
376 rstc@fffffe00 {
377 compatible = "atmel,at91sam9g45-rstc";
378 reg = <0xfffffe00 0x10>;
379 clocks = <&clk32k>;
380 };
381
382 pit: timer@fffffe30 {
383 compatible = "atmel,at91sam9260-pit";
384 reg = <0xfffffe30 0xf>;
385 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
386 clocks = <&mck>;
387 };
388
389 shdwc@fffffe10 {
390 compatible = "atmel,at91sam9x5-shdwc";
391 reg = <0xfffffe10 0x10>;
392 clocks = <&clk32k>;
393 };
394
395 sckc@fffffe50 {
396 compatible = "atmel,at91sam9x5-sckc";
397 reg = <0xfffffe50 0x4>;
398
399 slow_osc: slow_osc {
400 compatible = "atmel,at91sam9x5-clk-slow-osc";
401 #clock-cells = <0>;
402 clocks = <&slow_xtal>;
403 };
404
405 slow_rc_osc: slow_rc_osc {
406 compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
407 #clock-cells = <0>;
408 clock-frequency = <32768>;
409 clock-accuracy = <50000000>;
410 };
411
412 clk32k: slck {
413 compatible = "atmel,at91sam9x5-clk-slow";
414 #clock-cells = <0>;
415 clocks = <&slow_rc_osc>, <&slow_osc>;
416 };
417 };
418
419 mmc0: mmc@f0008000 {
420 compatible = "atmel,hsmci";
421 reg = <0xf0008000 0x600>;
422 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
423 dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
424 dma-names = "rxtx";
425 clocks = <&mci0_clk>;
426 clock-names = "mci_clk";
427 #address-cells = <1>;
428 #size-cells = <0>;
429 status = "disabled";
430 };
431
432 tcb0: timer@f8008000 {
433 compatible = "atmel,at91sam9x5-tcb";
434 reg = <0xf8008000 0x100>;
435 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
436 clocks = <&tcb_clk>, <&clk32k>;
437 clock-names = "t0_clk", "slow_clk";
438 };
439
440 tcb1: timer@f800c000 {
441 compatible = "atmel,at91sam9x5-tcb";
442 reg = <0xf800c000 0x100>;
443 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
444 clocks = <&tcb_clk>, <&clk32k>;
445 clock-names = "t0_clk", "slow_clk";
446 };
447
448 hlcdc: hlcdc@f8038000 {
449 compatible = "atmel,at91sam9n12-hlcdc";
450 reg = <0xf8038000 0x2000>;
451 interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
452 clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
453 clock-names = "periph_clk", "sys_clk", "slow_clk";
454 status = "disabled";
455
456 hlcdc-display-controller {
457 compatible = "atmel,hlcdc-display-controller";
458 #address-cells = <1>;
459 #size-cells = <0>;
460
461 port@0 {
462 #address-cells = <1>;
463 #size-cells = <0>;
464 reg = <0>;
465 };
466 };
467
468 hlcdc_pwm: hlcdc-pwm {
469 compatible = "atmel,hlcdc-pwm";
470 pinctrl-names = "default";
471 pinctrl-0 = <&pinctrl_lcd_pwm>;
472 #pwm-cells = <3>;
473 };
474 };
475
476 dma: dma-controller@ffffec00 {
477 compatible = "atmel,at91sam9g45-dma";
478 reg = <0xffffec00 0x200>;
479 interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
480 #dma-cells = <2>;
481 clocks = <&dma0_clk>;
482 clock-names = "dma_clk";
483 };
484
485 pinctrl@fffff400 {
486 #address-cells = <1>;
487 #size-cells = <1>;
488 compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
489 ranges = <0xfffff400 0xfffff400 0x800>;
490
491 atmel,mux-mask = <
492 /* A B C */
493 0xffffffff 0xffe07983 0x00000000 /* pioA */
494 0x00040000 0x00047e0f 0x00000000 /* pioB */
495 0xfdffffff 0x07c00000 0xb83fffff /* pioC */
496 0x003fffff 0x003f8000 0x00000000 /* pioD */
497 >;
498
499 /* shared pinctrl settings */
500 dbgu {
501 pinctrl_dbgu: dbgu-0 {
502 atmel,pins =
503 <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */
504 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph with pullup */
505 };
506 };
507
508 lcd {
509 pinctrl_lcd_base: lcd-base-0 {
510 atmel,pins =
511 <AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */
512 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */
513 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDISP */
514 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */
515 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */
516 };
517
518 pinctrl_lcd_pwm: lcd-pwm-0 {
519 atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */
520 };
521
522 pinctrl_lcd_rgb888: lcd-rgb-3 {
523 atmel,pins =
524 <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
525 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
526 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
527 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
528 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
529 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
530 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
531 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
532 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
533 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
534 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
535 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
536 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
537 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
538 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
539 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
540 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */
541 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */
542 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */
543 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */
544 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */
545 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */
546 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */
547 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */
548 };
549 };
550
551 usart0 {
552 pinctrl_usart0: usart0-0 {
553 atmel,pins =
554 <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */
555 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA0 periph A */
556 };
557
558 pinctrl_usart0_rts: usart0_rts-0 {
559 atmel,pins =
560 <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A */
561 };
562
563 pinctrl_usart0_cts: usart0_cts-0 {
564 atmel,pins =
565 <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA3 periph A */
566 };
567 };
568
569 usart1 {
570 pinctrl_usart1: usart1-0 {
571 atmel,pins =
572 <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA6 periph A with pullup */
573 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA5 periph A */
574 };
575 };
576
577 usart2 {
578 pinctrl_usart2: usart2-0 {
579 atmel,pins =
580 <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA8 periph A with pullup */
581 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA7 periph A */
582 };
583
584 pinctrl_usart2_rts: usart2_rts-0 {
585 atmel,pins =
586 <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */
587 };
588
589 pinctrl_usart2_cts: usart2_cts-0 {
590 atmel,pins =
591 <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */
592 };
593 };
594
595 usart3 {
596 pinctrl_usart3: usart3-0 {
597 atmel,pins =
598 <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC23 periph B with pullup */
599 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC22 periph B */
600 };
601
602 pinctrl_usart3_rts: usart3_rts-0 {
603 atmel,pins =
604 <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */
605 };
606
607 pinctrl_usart3_cts: usart3_cts-0 {
608 atmel,pins =
609 <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */
610 };
611 };
612
613 uart0 {
614 pinctrl_uart0: uart0-0 {
615 atmel,pins =
616 <AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* PC9 periph C with pullup */
617 AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC8 periph C */
618 };
619 };
620
621 uart1 {
622 pinctrl_uart1: uart1-0 {
623 atmel,pins =
624 <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* PC17 periph C with pullup */
625 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC16 periph C */
626 };
627 };
628
629 nand {
630 pinctrl_nand: nand-0 {
631 atmel,pins =
632 <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD5 gpio RDY pin pull_up*/
633 AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD4 gpio enable pin pull_up */
634 };
635 };
636
637 mmc0 {
638 pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
639 atmel,pins =
640 <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */
641 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */
642 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA15 periph A with pullup */
643 };
644
645 pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
646 atmel,pins =
647 <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */
648 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */
649 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */
650 };
651
652 pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
653 atmel,pins =
654 <AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA11 periph B with pullup */
655 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA12 periph B with pullup */
656 AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA13 periph B with pullup */
657 AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA14 periph B with pullup */
658 };
659 };
660
661 ssc0 {
662 pinctrl_ssc0_tx: ssc0_tx-0 {
663 atmel,pins =
664 <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */
665 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */
666 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */
667 };
668
669 pinctrl_ssc0_rx: ssc0_rx-0 {
670 atmel,pins =
671 <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */
672 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */
673 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */
674 };
675 };
676
677 spi0 {
678 pinctrl_spi0: spi0-0 {
679 atmel,pins =
680 <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A SPI0_MISO pin */
681 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A SPI0_MOSI pin */
682 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */
683 };
684 };
685
686 spi1 {
687 pinctrl_spi1: spi1-0 {
688 atmel,pins =
689 <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA21 periph B SPI1_MISO pin */
690 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B SPI1_MOSI pin */
691 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */
692 };
693 };
694
695 i2c0 {
696 pinctrl_i2c0: i2c0-0 {
697 atmel,pins =
698 <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
699 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
700 };
701 };
702
703 i2c1 {
704 pinctrl_i2c1: i2c1-0 {
705 atmel,pins =
706 <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
707 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
708 };
709 };
710
711 tcb0 {
712 pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
713 atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
714 };
715
716 pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
717 atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
718 };
719
720 pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
721 atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
722 };
723
724 pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
725 atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
726 };
727
728 pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
729 atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
730 };
731
732 pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
733 atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
734 };
735
736 pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
737 atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
738 };
739
740 pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
741 atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
742 };
743
744 pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
745 atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
746 };
747 };
748
749 tcb1 {
750 pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
751 atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
752 };
753
754 pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
755 atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
756 };
757
758 pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
759 atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
760 };
761
762 pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
763 atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
764 };
765
766 pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
767 atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
768 };
769
770 pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
771 atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
772 };
773
774 pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
775 atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
776 };
777
778 pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
779 atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
780 };
781
782 pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
783 atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
784 };
785 };
786
787 pioA: gpio@fffff400 {
788 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
789 reg = <0xfffff400 0x200>;
790 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
791 #gpio-cells = <2>;
792 gpio-controller;
793 interrupt-controller;
794 #interrupt-cells = <2>;
795 clocks = <&pioAB_clk>;
796 };
797
798 pioB: gpio@fffff600 {
799 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
800 reg = <0xfffff600 0x200>;
801 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
802 #gpio-cells = <2>;
803 gpio-controller;
804 interrupt-controller;
805 #interrupt-cells = <2>;
806 clocks = <&pioAB_clk>;
807 };
808
809 pioC: gpio@fffff800 {
810 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
811 reg = <0xfffff800 0x200>;
812 interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
813 #gpio-cells = <2>;
814 gpio-controller;
815 interrupt-controller;
816 #interrupt-cells = <2>;
817 clocks = <&pioCD_clk>;
818 };
819
820 pioD: gpio@fffffa00 {
821 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
822 reg = <0xfffffa00 0x200>;
823 interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
824 #gpio-cells = <2>;
825 gpio-controller;
826 interrupt-controller;
827 #interrupt-cells = <2>;
828 clocks = <&pioCD_clk>;
829 };
830 };
831
832 dbgu: serial@fffff200 {
833 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
834 reg = <0xfffff200 0x200>;
835 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
836 pinctrl-names = "default";
837 pinctrl-0 = <&pinctrl_dbgu>;
838 clocks = <&mck>;
839 clock-names = "usart";
840 status = "disabled";
841 };
842
843 ssc0: ssc@f0010000 {
844 compatible = "atmel,at91sam9g45-ssc";
845 reg = <0xf0010000 0x4000>;
846 interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
847 dmas = <&dma 0 AT91_DMA_CFG_PER_ID(21)>,
848 <&dma 0 AT91_DMA_CFG_PER_ID(22)>;
849 dma-names = "tx", "rx";
850 pinctrl-names = "default";
851 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
852 clocks = <&ssc0_clk>;
853 clock-names = "pclk";
854 status = "disabled";
855 };
856
857 usart0: serial@f801c000 {
858 compatible = "atmel,at91sam9260-usart";
859 reg = <0xf801c000 0x4000>;
860 interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
861 pinctrl-names = "default";
862 pinctrl-0 = <&pinctrl_usart0>;
863 clocks = <&usart0_clk>;
864 clock-names = "usart";
865 status = "disabled";
866 };
867
868 usart1: serial@f8020000 {
869 compatible = "atmel,at91sam9260-usart";
870 reg = <0xf8020000 0x4000>;
871 interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
872 pinctrl-names = "default";
873 pinctrl-0 = <&pinctrl_usart1>;
874 clocks = <&usart1_clk>;
875 clock-names = "usart";
876 status = "disabled";
877 };
878
879 usart2: serial@f8024000 {
880 compatible = "atmel,at91sam9260-usart";
881 reg = <0xf8024000 0x4000>;
882 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
883 pinctrl-names = "default";
884 pinctrl-0 = <&pinctrl_usart2>;
885 clocks = <&usart2_clk>;
886 clock-names = "usart";
887 status = "disabled";
888 };
889
890 usart3: serial@f8028000 {
891 compatible = "atmel,at91sam9260-usart";
892 reg = <0xf8028000 0x4000>;
893 interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
894 pinctrl-names = "default";
895 pinctrl-0 = <&pinctrl_usart3>;
896 clocks = <&usart3_clk>;
897 clock-names = "usart";
898 status = "disabled";
899 };
900
901 i2c0: i2c@f8010000 {
902 compatible = "atmel,at91sam9x5-i2c";
903 reg = <0xf8010000 0x100>;
904 interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
905 dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>,
906 <&dma 1 AT91_DMA_CFG_PER_ID(14)>;
907 dma-names = "tx", "rx";
908 #address-cells = <1>;
909 #size-cells = <0>;
910 pinctrl-names = "default";
911 pinctrl-0 = <&pinctrl_i2c0>;
912 clocks = <&twi0_clk>;
913 status = "disabled";
914 };
915
916 i2c1: i2c@f8014000 {
917 compatible = "atmel,at91sam9x5-i2c";
918 reg = <0xf8014000 0x100>;
919 interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
920 dmas = <&dma 1 AT91_DMA_CFG_PER_ID(15)>,
921 <&dma 1 AT91_DMA_CFG_PER_ID(16)>;
922 dma-names = "tx", "rx";
923 #address-cells = <1>;
924 #size-cells = <0>;
925 pinctrl-names = "default";
926 pinctrl-0 = <&pinctrl_i2c1>;
927 clocks = <&twi1_clk>;
928 status = "disabled";
929 };
930
931 spi0: spi@f0000000 {
932 #address-cells = <1>;
933 #size-cells = <0>;
934 compatible = "atmel,at91rm9200-spi";
935 reg = <0xf0000000 0x100>;
936 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
937 dmas = <&dma 1 AT91_DMA_CFG_PER_ID(1)>,
938 <&dma 1 AT91_DMA_CFG_PER_ID(2)>;
939 dma-names = "tx", "rx";
940 pinctrl-names = "default";
941 pinctrl-0 = <&pinctrl_spi0>;
942 clocks = <&spi0_clk>;
943 clock-names = "spi_clk";
944 status = "disabled";
945 };
946
947 spi1: spi@f0004000 {
948 #address-cells = <1>;
949 #size-cells = <0>;
950 compatible = "atmel,at91rm9200-spi";
951 reg = <0xf0004000 0x100>;
952 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
953 dmas = <&dma 1 AT91_DMA_CFG_PER_ID(3)>,
954 <&dma 1 AT91_DMA_CFG_PER_ID(4)>;
955 dma-names = "tx", "rx";
956 pinctrl-names = "default";
957 pinctrl-0 = <&pinctrl_spi1>;
958 clocks = <&spi1_clk>;
959 clock-names = "spi_clk";
960 status = "disabled";
961 };
962
963 watchdog@fffffe40 {
964 compatible = "atmel,at91sam9260-wdt";
965 reg = <0xfffffe40 0x10>;
966 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
967 clocks = <&clk32k>;
968 atmel,watchdog-type = "hardware";
969 atmel,reset-type = "all";
970 atmel,dbg-halt;
971 status = "disabled";
972 };
973
974 rtc@fffffeb0 {
975 compatible = "atmel,at91rm9200-rtc";
976 reg = <0xfffffeb0 0x40>;
977 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
978 clocks = <&clk32k>;
979 status = "disabled";
980 };
981
982 pwm0: pwm@f8034000 {
983 compatible = "atmel,at91sam9rl-pwm";
984 reg = <0xf8034000 0x300>;
985 interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
986 #pwm-cells = <3>;
987 clocks = <&pwm_clk>;
988 status = "disabled";
989 };
990
991 usb1: gadget@f803c000 {
992 compatible = "atmel,at91sam9260-udc";
993 reg = <0xf803c000 0x4000>;
994 interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
995 clocks = <&udphs_clk>, <&udpck>;
996 clock-names = "pclk", "hclk";
997 status = "disabled";
998 };
999 };
1000
1001 nand0: nand@40000000 {
1002 compatible = "atmel,at91rm9200-nand";
1003 #address-cells = <1>;
1004 #size-cells = <1>;
1005 reg = < 0x40000000 0x10000000
1006 0xffffe000 0x00000600
1007 0xffffe600 0x00000200
1008 0x00108000 0x00018000
1009 >;
1010 atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
1011 atmel,nand-addr-offset = <21>;
1012 atmel,nand-cmd-offset = <22>;
1013 atmel,nand-has-dma;
1014 pinctrl-names = "default";
1015 pinctrl-0 = <&pinctrl_nand>;
1016 gpios = <&pioD 5 GPIO_ACTIVE_HIGH
1017 &pioD 4 GPIO_ACTIVE_HIGH
1018 0
1019 >;
1020 status = "disabled";
1021 };
1022
1023 usb0: ohci@00500000 {
1024 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
1025 reg = <0x00500000 0x00100000>;
1026 interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
1027 clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
1028 clock-names = "ohci_clk", "hclk", "uhpck";
1029 status = "disabled";
1030 };
1031 };
1032
1033 i2c@0 {
1034 compatible = "i2c-gpio";
1035 gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
1036 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
1037 >;
1038 i2c-gpio,sda-open-drain;
1039 i2c-gpio,scl-open-drain;
1040 i2c-gpio,delay-us = <2>; /* ~100 kHz */
1041 #address-cells = <1>;
1042 #size-cells = <0>;
1043 status = "disabled";
1044 };
1045};