Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 */
4
5#include <linux/init.h>
6#include <linux/slab.h>
7#include <linux/usb.h>
8#include <linux/usb/audio.h>
9#include <linux/usb/audio-v2.h>
10#include <linux/usb/audio-v3.h>
11
12#include <sound/core.h>
13#include <sound/pcm.h>
14
15#include "usbaudio.h"
16#include "card.h"
17#include "quirks.h"
18#include "helper.h"
19#include "debug.h"
20#include "clock.h"
21#include "format.h"
22
23/*
24 * parse the audio format type I descriptor
25 * and returns the corresponding pcm format
26 *
27 * @dev: usb device
28 * @fp: audioformat record
29 * @format: the format tag (wFormatTag)
30 * @fmt: the format type descriptor (v1/v2) or AudioStreaming descriptor (v3)
31 */
32static u64 parse_audio_format_i_type(struct snd_usb_audio *chip,
33 struct audioformat *fp,
34 u64 format, void *_fmt)
35{
36 int sample_width, sample_bytes;
37 u64 pcm_formats = 0;
38
39 switch (fp->protocol) {
40 case UAC_VERSION_1:
41 default: {
42 struct uac_format_type_i_discrete_descriptor *fmt = _fmt;
43 sample_width = fmt->bBitResolution;
44 sample_bytes = fmt->bSubframeSize;
45 format = 1ULL << format;
46 break;
47 }
48
49 case UAC_VERSION_2: {
50 struct uac_format_type_i_ext_descriptor *fmt = _fmt;
51 sample_width = fmt->bBitResolution;
52 sample_bytes = fmt->bSubslotSize;
53
54 if (format & UAC2_FORMAT_TYPE_I_RAW_DATA) {
55 pcm_formats |= SNDRV_PCM_FMTBIT_SPECIAL;
56 /* flag potentially raw DSD capable altsettings */
57 fp->dsd_raw = true;
58 }
59
60 format <<= 1;
61 break;
62 }
63 case UAC_VERSION_3: {
64 struct uac3_as_header_descriptor *as = _fmt;
65
66 sample_width = as->bBitResolution;
67 sample_bytes = as->bSubslotSize;
68
69 if (format & UAC3_FORMAT_TYPE_I_RAW_DATA)
70 pcm_formats |= SNDRV_PCM_FMTBIT_SPECIAL;
71
72 format <<= 1;
73 break;
74 }
75 }
76
77 fp->fmt_bits = sample_width;
78
79 if ((pcm_formats == 0) &&
80 (format == 0 || format == (1 << UAC_FORMAT_TYPE_I_UNDEFINED))) {
81 /* some devices don't define this correctly... */
82 usb_audio_info(chip, "%u:%d : format type 0 is detected, processed as PCM\n",
83 fp->iface, fp->altsetting);
84 format = 1 << UAC_FORMAT_TYPE_I_PCM;
85 }
86 if (format & (1 << UAC_FORMAT_TYPE_I_PCM)) {
87 if (((chip->usb_id == USB_ID(0x0582, 0x0016)) ||
88 /* Edirol SD-90 */
89 (chip->usb_id == USB_ID(0x0582, 0x000c))) &&
90 /* Roland SC-D70 */
91 sample_width == 24 && sample_bytes == 2)
92 sample_bytes = 3;
93 else if (sample_width > sample_bytes * 8) {
94 usb_audio_info(chip, "%u:%d : sample bitwidth %d in over sample bytes %d\n",
95 fp->iface, fp->altsetting,
96 sample_width, sample_bytes);
97 }
98 /* check the format byte size */
99 switch (sample_bytes) {
100 case 1:
101 pcm_formats |= SNDRV_PCM_FMTBIT_S8;
102 break;
103 case 2:
104 if (snd_usb_is_big_endian_format(chip, fp))
105 pcm_formats |= SNDRV_PCM_FMTBIT_S16_BE; /* grrr, big endian!! */
106 else
107 pcm_formats |= SNDRV_PCM_FMTBIT_S16_LE;
108 break;
109 case 3:
110 if (snd_usb_is_big_endian_format(chip, fp))
111 pcm_formats |= SNDRV_PCM_FMTBIT_S24_3BE; /* grrr, big endian!! */
112 else
113 pcm_formats |= SNDRV_PCM_FMTBIT_S24_3LE;
114 break;
115 case 4:
116 pcm_formats |= SNDRV_PCM_FMTBIT_S32_LE;
117 break;
118 default:
119 usb_audio_info(chip,
120 "%u:%d : unsupported sample bitwidth %d in %d bytes\n",
121 fp->iface, fp->altsetting,
122 sample_width, sample_bytes);
123 break;
124 }
125 }
126 if (format & (1 << UAC_FORMAT_TYPE_I_PCM8)) {
127 /* Dallas DS4201 workaround: it advertises U8 format, but really
128 supports S8. */
129 if (chip->usb_id == USB_ID(0x04fa, 0x4201))
130 pcm_formats |= SNDRV_PCM_FMTBIT_S8;
131 else
132 pcm_formats |= SNDRV_PCM_FMTBIT_U8;
133 }
134 if (format & (1 << UAC_FORMAT_TYPE_I_IEEE_FLOAT)) {
135 pcm_formats |= SNDRV_PCM_FMTBIT_FLOAT_LE;
136 }
137 if (format & (1 << UAC_FORMAT_TYPE_I_ALAW)) {
138 pcm_formats |= SNDRV_PCM_FMTBIT_A_LAW;
139 }
140 if (format & (1 << UAC_FORMAT_TYPE_I_MULAW)) {
141 pcm_formats |= SNDRV_PCM_FMTBIT_MU_LAW;
142 }
143 if (format & ~0x3f) {
144 usb_audio_info(chip,
145 "%u:%d : unsupported format bits %#llx\n",
146 fp->iface, fp->altsetting, format);
147 }
148
149 pcm_formats |= snd_usb_interface_dsd_format_quirks(chip, fp, sample_bytes);
150
151 return pcm_formats;
152}
153
154
155/*
156 * parse the format descriptor and stores the possible sample rates
157 * on the audioformat table (audio class v1).
158 *
159 * @dev: usb device
160 * @fp: audioformat record
161 * @fmt: the format descriptor
162 * @offset: the start offset of descriptor pointing the rate type
163 * (7 for type I and II, 8 for type II)
164 */
165static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audioformat *fp,
166 unsigned char *fmt, int offset)
167{
168 int nr_rates = fmt[offset];
169
170 if (fmt[0] < offset + 1 + 3 * (nr_rates ? nr_rates : 2)) {
171 usb_audio_err(chip,
172 "%u:%d : invalid UAC_FORMAT_TYPE desc\n",
173 fp->iface, fp->altsetting);
174 return -EINVAL;
175 }
176
177 if (nr_rates) {
178 /*
179 * build the rate table and bitmap flags
180 */
181 int r, idx;
182
183 fp->rate_table = kmalloc_array(nr_rates, sizeof(int),
184 GFP_KERNEL);
185 if (fp->rate_table == NULL)
186 return -ENOMEM;
187
188 fp->nr_rates = 0;
189 fp->rate_min = fp->rate_max = 0;
190 for (r = 0, idx = offset + 1; r < nr_rates; r++, idx += 3) {
191 unsigned int rate = combine_triple(&fmt[idx]);
192 if (!rate)
193 continue;
194 /* C-Media CM6501 mislabels its 96 kHz altsetting */
195 /* Terratec Aureon 7.1 USB C-Media 6206, too */
196 if (rate == 48000 && nr_rates == 1 &&
197 (chip->usb_id == USB_ID(0x0d8c, 0x0201) ||
198 chip->usb_id == USB_ID(0x0d8c, 0x0102) ||
199 chip->usb_id == USB_ID(0x0ccd, 0x00b1)) &&
200 fp->altsetting == 5 && fp->maxpacksize == 392)
201 rate = 96000;
202 /* Creative VF0420/VF0470 Live Cams report 16 kHz instead of 8kHz */
203 if (rate == 16000 &&
204 (chip->usb_id == USB_ID(0x041e, 0x4064) ||
205 chip->usb_id == USB_ID(0x041e, 0x4068)))
206 rate = 8000;
207
208 fp->rate_table[fp->nr_rates] = rate;
209 if (!fp->rate_min || rate < fp->rate_min)
210 fp->rate_min = rate;
211 if (!fp->rate_max || rate > fp->rate_max)
212 fp->rate_max = rate;
213 fp->rates |= snd_pcm_rate_to_rate_bit(rate);
214 fp->nr_rates++;
215 }
216 if (!fp->nr_rates) {
217 hwc_debug("All rates were zero. Skipping format!\n");
218 return -EINVAL;
219 }
220 } else {
221 /* continuous rates */
222 fp->rates = SNDRV_PCM_RATE_CONTINUOUS;
223 fp->rate_min = combine_triple(&fmt[offset + 1]);
224 fp->rate_max = combine_triple(&fmt[offset + 4]);
225 }
226 return 0;
227}
228
229/*
230 * Helper function to walk the array of sample rate triplets reported by
231 * the device. The problem is that we need to parse whole array first to
232 * get to know how many sample rates we have to expect.
233 * Then fp->rate_table can be allocated and filled.
234 */
235static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip,
236 struct audioformat *fp, int nr_triplets,
237 const unsigned char *data)
238{
239 int i, nr_rates = 0;
240
241 fp->rates = fp->rate_min = fp->rate_max = 0;
242
243 for (i = 0; i < nr_triplets; i++) {
244 int min = combine_quad(&data[2 + 12 * i]);
245 int max = combine_quad(&data[6 + 12 * i]);
246 int res = combine_quad(&data[10 + 12 * i]);
247 unsigned int rate;
248
249 if ((max < 0) || (min < 0) || (res < 0) || (max < min))
250 continue;
251
252 /*
253 * for ranges with res == 1, we announce a continuous sample
254 * rate range, and this function should return 0 for no further
255 * parsing.
256 */
257 if (res == 1) {
258 fp->rate_min = min;
259 fp->rate_max = max;
260 fp->rates = SNDRV_PCM_RATE_CONTINUOUS;
261 return 0;
262 }
263
264 for (rate = min; rate <= max; rate += res) {
265 if (fp->rate_table)
266 fp->rate_table[nr_rates] = rate;
267 if (!fp->rate_min || rate < fp->rate_min)
268 fp->rate_min = rate;
269 if (!fp->rate_max || rate > fp->rate_max)
270 fp->rate_max = rate;
271 fp->rates |= snd_pcm_rate_to_rate_bit(rate);
272
273 nr_rates++;
274 if (nr_rates >= MAX_NR_RATES) {
275 usb_audio_err(chip, "invalid uac2 rates\n");
276 break;
277 }
278
279 /* avoid endless loop */
280 if (res == 0)
281 break;
282 }
283 }
284
285 return nr_rates;
286}
287
288/* Line6 Helix series don't support the UAC2_CS_RANGE usb function
289 * call. Return a static table of known clock rates.
290 */
291static int line6_parse_audio_format_rates_quirk(struct snd_usb_audio *chip,
292 struct audioformat *fp)
293{
294 switch (chip->usb_id) {
295 case USB_ID(0x0E41, 0x4241): /* Line6 Helix */
296 case USB_ID(0x0E41, 0x4242): /* Line6 Helix Rack */
297 case USB_ID(0x0E41, 0x4244): /* Line6 Helix LT */
298 case USB_ID(0x0E41, 0x4246): /* Line6 HX-Stomp */
299 /* supported rates: 48Khz */
300 kfree(fp->rate_table);
301 fp->rate_table = kmalloc(sizeof(int), GFP_KERNEL);
302 if (!fp->rate_table)
303 return -ENOMEM;
304 fp->nr_rates = 1;
305 fp->rate_min = 48000;
306 fp->rate_max = 48000;
307 fp->rates = SNDRV_PCM_RATE_48000;
308 fp->rate_table[0] = 48000;
309 return 0;
310 }
311
312 return -ENODEV;
313}
314
315/*
316 * parse the format descriptor and stores the possible sample rates
317 * on the audioformat table (audio class v2 and v3).
318 */
319static int parse_audio_format_rates_v2v3(struct snd_usb_audio *chip,
320 struct audioformat *fp)
321{
322 struct usb_device *dev = chip->dev;
323 unsigned char tmp[2], *data;
324 int nr_triplets, data_size, ret = 0, ret_l6;
325 int clock = snd_usb_clock_find_source(chip, fp->protocol,
326 fp->clock, false);
327
328 if (clock < 0) {
329 dev_err(&dev->dev,
330 "%s(): unable to find clock source (clock %d)\n",
331 __func__, clock);
332 goto err;
333 }
334
335 /* get the number of sample rates first by only fetching 2 bytes */
336 ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
337 USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
338 UAC2_CS_CONTROL_SAM_FREQ << 8,
339 snd_usb_ctrl_intf(chip) | (clock << 8),
340 tmp, sizeof(tmp));
341
342 if (ret < 0) {
343 /* line6 helix devices don't support UAC2_CS_CONTROL_SAM_FREQ call */
344 ret_l6 = line6_parse_audio_format_rates_quirk(chip, fp);
345 if (ret_l6 == -ENODEV) {
346 /* no line6 device found continue showing the error */
347 dev_err(&dev->dev,
348 "%s(): unable to retrieve number of sample rates (clock %d)\n",
349 __func__, clock);
350 goto err;
351 }
352 if (ret_l6 == 0) {
353 dev_info(&dev->dev,
354 "%s(): unable to retrieve number of sample rates: set it to a predefined value (clock %d).\n",
355 __func__, clock);
356 return 0;
357 }
358 ret = ret_l6;
359 goto err;
360 }
361
362 nr_triplets = (tmp[1] << 8) | tmp[0];
363 data_size = 2 + 12 * nr_triplets;
364 data = kzalloc(data_size, GFP_KERNEL);
365 if (!data) {
366 ret = -ENOMEM;
367 goto err;
368 }
369
370 /* now get the full information */
371 ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
372 USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
373 UAC2_CS_CONTROL_SAM_FREQ << 8,
374 snd_usb_ctrl_intf(chip) | (clock << 8),
375 data, data_size);
376
377 if (ret < 0) {
378 dev_err(&dev->dev,
379 "%s(): unable to retrieve sample rate range (clock %d)\n",
380 __func__, clock);
381 ret = -EINVAL;
382 goto err_free;
383 }
384
385 /* Call the triplet parser, and make sure fp->rate_table is NULL.
386 * We just use the return value to know how many sample rates we
387 * will have to deal with. */
388 kfree(fp->rate_table);
389 fp->rate_table = NULL;
390 fp->nr_rates = parse_uac2_sample_rate_range(chip, fp, nr_triplets, data);
391
392 if (fp->nr_rates == 0) {
393 /* SNDRV_PCM_RATE_CONTINUOUS */
394 ret = 0;
395 goto err_free;
396 }
397
398 fp->rate_table = kmalloc_array(fp->nr_rates, sizeof(int), GFP_KERNEL);
399 if (!fp->rate_table) {
400 ret = -ENOMEM;
401 goto err_free;
402 }
403
404 /* Call the triplet parser again, but this time, fp->rate_table is
405 * allocated, so the rates will be stored */
406 parse_uac2_sample_rate_range(chip, fp, nr_triplets, data);
407
408err_free:
409 kfree(data);
410err:
411 return ret;
412}
413
414/*
415 * parse the format type I and III descriptors
416 */
417static int parse_audio_format_i(struct snd_usb_audio *chip,
418 struct audioformat *fp, u64 format,
419 void *_fmt)
420{
421 snd_pcm_format_t pcm_format;
422 unsigned int fmt_type;
423 int ret;
424
425 switch (fp->protocol) {
426 default:
427 case UAC_VERSION_1:
428 case UAC_VERSION_2: {
429 struct uac_format_type_i_continuous_descriptor *fmt = _fmt;
430
431 fmt_type = fmt->bFormatType;
432 break;
433 }
434 case UAC_VERSION_3: {
435 /* fp->fmt_type is already set in this case */
436 fmt_type = fp->fmt_type;
437 break;
438 }
439 }
440
441 if (fmt_type == UAC_FORMAT_TYPE_III) {
442 /* FIXME: the format type is really IECxxx
443 * but we give normal PCM format to get the existing
444 * apps working...
445 */
446 switch (chip->usb_id) {
447
448 case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
449 if (chip->setup == 0x00 &&
450 fp->altsetting == 6)
451 pcm_format = SNDRV_PCM_FORMAT_S16_BE;
452 else
453 pcm_format = SNDRV_PCM_FORMAT_S16_LE;
454 break;
455 default:
456 pcm_format = SNDRV_PCM_FORMAT_S16_LE;
457 }
458 fp->formats = pcm_format_to_bits(pcm_format);
459 } else {
460 fp->formats = parse_audio_format_i_type(chip, fp, format, _fmt);
461 if (!fp->formats)
462 return -EINVAL;
463 }
464
465 /* gather possible sample rates */
466 /* audio class v1 reports possible sample rates as part of the
467 * proprietary class specific descriptor.
468 * audio class v2 uses class specific EP0 range requests for that.
469 */
470 switch (fp->protocol) {
471 default:
472 case UAC_VERSION_1: {
473 struct uac_format_type_i_continuous_descriptor *fmt = _fmt;
474
475 fp->channels = fmt->bNrChannels;
476 ret = parse_audio_format_rates_v1(chip, fp, (unsigned char *) fmt, 7);
477 break;
478 }
479 case UAC_VERSION_2:
480 case UAC_VERSION_3: {
481 /* fp->channels is already set in this case */
482 ret = parse_audio_format_rates_v2v3(chip, fp);
483 break;
484 }
485 }
486
487 if (fp->channels < 1) {
488 usb_audio_err(chip,
489 "%u:%d : invalid channels %d\n",
490 fp->iface, fp->altsetting, fp->channels);
491 return -EINVAL;
492 }
493
494 return ret;
495}
496
497/*
498 * parse the format type II descriptor
499 */
500static int parse_audio_format_ii(struct snd_usb_audio *chip,
501 struct audioformat *fp,
502 u64 format, void *_fmt)
503{
504 int brate, framesize, ret;
505
506 switch (format) {
507 case UAC_FORMAT_TYPE_II_AC3:
508 /* FIXME: there is no AC3 format defined yet */
509 // fp->formats = SNDRV_PCM_FMTBIT_AC3;
510 fp->formats = SNDRV_PCM_FMTBIT_U8; /* temporary hack to receive byte streams */
511 break;
512 case UAC_FORMAT_TYPE_II_MPEG:
513 fp->formats = SNDRV_PCM_FMTBIT_MPEG;
514 break;
515 default:
516 usb_audio_info(chip,
517 "%u:%d : unknown format tag %#llx is detected. processed as MPEG.\n",
518 fp->iface, fp->altsetting, format);
519 fp->formats = SNDRV_PCM_FMTBIT_MPEG;
520 break;
521 }
522
523 fp->channels = 1;
524
525 switch (fp->protocol) {
526 default:
527 case UAC_VERSION_1: {
528 struct uac_format_type_ii_discrete_descriptor *fmt = _fmt;
529 brate = le16_to_cpu(fmt->wMaxBitRate);
530 framesize = le16_to_cpu(fmt->wSamplesPerFrame);
531 usb_audio_info(chip, "found format II with max.bitrate = %d, frame size=%d\n", brate, framesize);
532 fp->frame_size = framesize;
533 ret = parse_audio_format_rates_v1(chip, fp, _fmt, 8); /* fmt[8..] sample rates */
534 break;
535 }
536 case UAC_VERSION_2: {
537 struct uac_format_type_ii_ext_descriptor *fmt = _fmt;
538 brate = le16_to_cpu(fmt->wMaxBitRate);
539 framesize = le16_to_cpu(fmt->wSamplesPerFrame);
540 usb_audio_info(chip, "found format II with max.bitrate = %d, frame size=%d\n", brate, framesize);
541 fp->frame_size = framesize;
542 ret = parse_audio_format_rates_v2v3(chip, fp);
543 break;
544 }
545 }
546
547 return ret;
548}
549
550int snd_usb_parse_audio_format(struct snd_usb_audio *chip,
551 struct audioformat *fp, u64 format,
552 struct uac_format_type_i_continuous_descriptor *fmt,
553 int stream)
554{
555 int err;
556
557 switch (fmt->bFormatType) {
558 case UAC_FORMAT_TYPE_I:
559 case UAC_FORMAT_TYPE_III:
560 err = parse_audio_format_i(chip, fp, format, fmt);
561 break;
562 case UAC_FORMAT_TYPE_II:
563 err = parse_audio_format_ii(chip, fp, format, fmt);
564 break;
565 default:
566 usb_audio_info(chip,
567 "%u:%d : format type %d is not supported yet\n",
568 fp->iface, fp->altsetting,
569 fmt->bFormatType);
570 return -ENOTSUPP;
571 }
572 fp->fmt_type = fmt->bFormatType;
573 if (err < 0)
574 return err;
575#if 1
576 /* FIXME: temporary hack for extigy/audigy 2 nx/zs */
577 /* extigy apparently supports sample rates other than 48k
578 * but not in ordinary way. so we enable only 48k atm.
579 */
580 if (chip->usb_id == USB_ID(0x041e, 0x3000) ||
581 chip->usb_id == USB_ID(0x041e, 0x3020) ||
582 chip->usb_id == USB_ID(0x041e, 0x3061)) {
583 if (fmt->bFormatType == UAC_FORMAT_TYPE_I &&
584 fp->rates != SNDRV_PCM_RATE_48000 &&
585 fp->rates != SNDRV_PCM_RATE_96000)
586 return -ENOTSUPP;
587 }
588#endif
589 return 0;
590}
591
592int snd_usb_parse_audio_format_v3(struct snd_usb_audio *chip,
593 struct audioformat *fp,
594 struct uac3_as_header_descriptor *as,
595 int stream)
596{
597 u64 format = le64_to_cpu(as->bmFormats);
598 int err;
599
600 /*
601 * Type I format bits are D0..D6
602 * This test works because type IV is not supported
603 */
604 if (format & 0x7f)
605 fp->fmt_type = UAC_FORMAT_TYPE_I;
606 else
607 fp->fmt_type = UAC_FORMAT_TYPE_III;
608
609 err = parse_audio_format_i(chip, fp, format, as);
610 if (err < 0)
611 return err;
612
613 return 0;
614}
1/*
2 * This program is free software; you can redistribute it and/or modify
3 * it under the terms of the GNU General Public License as published by
4 * the Free Software Foundation; either version 2 of the License, or
5 * (at your option) any later version.
6 *
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
11 *
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
15 *
16 */
17
18#include <linux/init.h>
19#include <linux/slab.h>
20#include <linux/usb.h>
21#include <linux/usb/audio.h>
22#include <linux/usb/audio-v2.h>
23
24#include <sound/core.h>
25#include <sound/pcm.h>
26
27#include "usbaudio.h"
28#include "card.h"
29#include "quirks.h"
30#include "helper.h"
31#include "debug.h"
32#include "clock.h"
33#include "format.h"
34
35/*
36 * parse the audio format type I descriptor
37 * and returns the corresponding pcm format
38 *
39 * @dev: usb device
40 * @fp: audioformat record
41 * @format: the format tag (wFormatTag)
42 * @fmt: the format type descriptor
43 */
44static u64 parse_audio_format_i_type(struct snd_usb_audio *chip,
45 struct audioformat *fp,
46 unsigned int format, void *_fmt)
47{
48 int sample_width, sample_bytes;
49 u64 pcm_formats = 0;
50
51 switch (fp->protocol) {
52 case UAC_VERSION_1:
53 default: {
54 struct uac_format_type_i_discrete_descriptor *fmt = _fmt;
55 sample_width = fmt->bBitResolution;
56 sample_bytes = fmt->bSubframeSize;
57 format = 1 << format;
58 break;
59 }
60
61 case UAC_VERSION_2: {
62 struct uac_format_type_i_ext_descriptor *fmt = _fmt;
63 sample_width = fmt->bBitResolution;
64 sample_bytes = fmt->bSubslotSize;
65
66 if (format & UAC2_FORMAT_TYPE_I_RAW_DATA)
67 pcm_formats |= SNDRV_PCM_FMTBIT_SPECIAL;
68
69 format <<= 1;
70 break;
71 }
72 }
73
74 if ((pcm_formats == 0) &&
75 (format == 0 || format == (1 << UAC_FORMAT_TYPE_I_UNDEFINED))) {
76 /* some devices don't define this correctly... */
77 usb_audio_info(chip, "%u:%d : format type 0 is detected, processed as PCM\n",
78 fp->iface, fp->altsetting);
79 format = 1 << UAC_FORMAT_TYPE_I_PCM;
80 }
81 if (format & (1 << UAC_FORMAT_TYPE_I_PCM)) {
82 if (((chip->usb_id == USB_ID(0x0582, 0x0016)) ||
83 /* Edirol SD-90 */
84 (chip->usb_id == USB_ID(0x0582, 0x000c))) &&
85 /* Roland SC-D70 */
86 sample_width == 24 && sample_bytes == 2)
87 sample_bytes = 3;
88 else if (sample_width > sample_bytes * 8) {
89 usb_audio_info(chip, "%u:%d : sample bitwidth %d in over sample bytes %d\n",
90 fp->iface, fp->altsetting,
91 sample_width, sample_bytes);
92 }
93 /* check the format byte size */
94 switch (sample_bytes) {
95 case 1:
96 pcm_formats |= SNDRV_PCM_FMTBIT_S8;
97 break;
98 case 2:
99 if (snd_usb_is_big_endian_format(chip, fp))
100 pcm_formats |= SNDRV_PCM_FMTBIT_S16_BE; /* grrr, big endian!! */
101 else
102 pcm_formats |= SNDRV_PCM_FMTBIT_S16_LE;
103 break;
104 case 3:
105 if (snd_usb_is_big_endian_format(chip, fp))
106 pcm_formats |= SNDRV_PCM_FMTBIT_S24_3BE; /* grrr, big endian!! */
107 else
108 pcm_formats |= SNDRV_PCM_FMTBIT_S24_3LE;
109 break;
110 case 4:
111 pcm_formats |= SNDRV_PCM_FMTBIT_S32_LE;
112 break;
113 default:
114 usb_audio_info(chip,
115 "%u:%d : unsupported sample bitwidth %d in %d bytes\n",
116 fp->iface, fp->altsetting,
117 sample_width, sample_bytes);
118 break;
119 }
120 }
121 if (format & (1 << UAC_FORMAT_TYPE_I_PCM8)) {
122 /* Dallas DS4201 workaround: it advertises U8 format, but really
123 supports S8. */
124 if (chip->usb_id == USB_ID(0x04fa, 0x4201))
125 pcm_formats |= SNDRV_PCM_FMTBIT_S8;
126 else
127 pcm_formats |= SNDRV_PCM_FMTBIT_U8;
128 }
129 if (format & (1 << UAC_FORMAT_TYPE_I_IEEE_FLOAT)) {
130 pcm_formats |= SNDRV_PCM_FMTBIT_FLOAT_LE;
131 }
132 if (format & (1 << UAC_FORMAT_TYPE_I_ALAW)) {
133 pcm_formats |= SNDRV_PCM_FMTBIT_A_LAW;
134 }
135 if (format & (1 << UAC_FORMAT_TYPE_I_MULAW)) {
136 pcm_formats |= SNDRV_PCM_FMTBIT_MU_LAW;
137 }
138 if (format & ~0x3f) {
139 usb_audio_info(chip,
140 "%u:%d : unsupported format bits %#x\n",
141 fp->iface, fp->altsetting, format);
142 }
143
144 pcm_formats |= snd_usb_interface_dsd_format_quirks(chip, fp, sample_bytes);
145
146 return pcm_formats;
147}
148
149
150/*
151 * parse the format descriptor and stores the possible sample rates
152 * on the audioformat table (audio class v1).
153 *
154 * @dev: usb device
155 * @fp: audioformat record
156 * @fmt: the format descriptor
157 * @offset: the start offset of descriptor pointing the rate type
158 * (7 for type I and II, 8 for type II)
159 */
160static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audioformat *fp,
161 unsigned char *fmt, int offset)
162{
163 int nr_rates = fmt[offset];
164
165 if (fmt[0] < offset + 1 + 3 * (nr_rates ? nr_rates : 2)) {
166 usb_audio_err(chip,
167 "%u:%d : invalid UAC_FORMAT_TYPE desc\n",
168 fp->iface, fp->altsetting);
169 return -EINVAL;
170 }
171
172 if (nr_rates) {
173 /*
174 * build the rate table and bitmap flags
175 */
176 int r, idx;
177
178 fp->rate_table = kmalloc(sizeof(int) * nr_rates, GFP_KERNEL);
179 if (fp->rate_table == NULL) {
180 usb_audio_err(chip, "cannot malloc\n");
181 return -ENOMEM;
182 }
183
184 fp->nr_rates = 0;
185 fp->rate_min = fp->rate_max = 0;
186 for (r = 0, idx = offset + 1; r < nr_rates; r++, idx += 3) {
187 unsigned int rate = combine_triple(&fmt[idx]);
188 if (!rate)
189 continue;
190 /* C-Media CM6501 mislabels its 96 kHz altsetting */
191 /* Terratec Aureon 7.1 USB C-Media 6206, too */
192 if (rate == 48000 && nr_rates == 1 &&
193 (chip->usb_id == USB_ID(0x0d8c, 0x0201) ||
194 chip->usb_id == USB_ID(0x0d8c, 0x0102) ||
195 chip->usb_id == USB_ID(0x0ccd, 0x00b1)) &&
196 fp->altsetting == 5 && fp->maxpacksize == 392)
197 rate = 96000;
198 /* Creative VF0420/VF0470 Live Cams report 16 kHz instead of 8kHz */
199 if (rate == 16000 &&
200 (chip->usb_id == USB_ID(0x041e, 0x4064) ||
201 chip->usb_id == USB_ID(0x041e, 0x4068)))
202 rate = 8000;
203
204 fp->rate_table[fp->nr_rates] = rate;
205 if (!fp->rate_min || rate < fp->rate_min)
206 fp->rate_min = rate;
207 if (!fp->rate_max || rate > fp->rate_max)
208 fp->rate_max = rate;
209 fp->rates |= snd_pcm_rate_to_rate_bit(rate);
210 fp->nr_rates++;
211 }
212 if (!fp->nr_rates) {
213 hwc_debug("All rates were zero. Skipping format!\n");
214 return -EINVAL;
215 }
216 } else {
217 /* continuous rates */
218 fp->rates = SNDRV_PCM_RATE_CONTINUOUS;
219 fp->rate_min = combine_triple(&fmt[offset + 1]);
220 fp->rate_max = combine_triple(&fmt[offset + 4]);
221 }
222 return 0;
223}
224
225/*
226 * Helper function to walk the array of sample rate triplets reported by
227 * the device. The problem is that we need to parse whole array first to
228 * get to know how many sample rates we have to expect.
229 * Then fp->rate_table can be allocated and filled.
230 */
231static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip,
232 struct audioformat *fp, int nr_triplets,
233 const unsigned char *data)
234{
235 int i, nr_rates = 0;
236
237 fp->rates = fp->rate_min = fp->rate_max = 0;
238
239 for (i = 0; i < nr_triplets; i++) {
240 int min = combine_quad(&data[2 + 12 * i]);
241 int max = combine_quad(&data[6 + 12 * i]);
242 int res = combine_quad(&data[10 + 12 * i]);
243 unsigned int rate;
244
245 if ((max < 0) || (min < 0) || (res < 0) || (max < min))
246 continue;
247
248 /*
249 * for ranges with res == 1, we announce a continuous sample
250 * rate range, and this function should return 0 for no further
251 * parsing.
252 */
253 if (res == 1) {
254 fp->rate_min = min;
255 fp->rate_max = max;
256 fp->rates = SNDRV_PCM_RATE_CONTINUOUS;
257 return 0;
258 }
259
260 for (rate = min; rate <= max; rate += res) {
261 if (fp->rate_table)
262 fp->rate_table[nr_rates] = rate;
263 if (!fp->rate_min || rate < fp->rate_min)
264 fp->rate_min = rate;
265 if (!fp->rate_max || rate > fp->rate_max)
266 fp->rate_max = rate;
267 fp->rates |= snd_pcm_rate_to_rate_bit(rate);
268
269 nr_rates++;
270 if (nr_rates >= MAX_NR_RATES) {
271 usb_audio_err(chip, "invalid uac2 rates\n");
272 break;
273 }
274
275 /* avoid endless loop */
276 if (res == 0)
277 break;
278 }
279 }
280
281 return nr_rates;
282}
283
284/*
285 * parse the format descriptor and stores the possible sample rates
286 * on the audioformat table (audio class v2).
287 */
288static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
289 struct audioformat *fp)
290{
291 struct usb_device *dev = chip->dev;
292 unsigned char tmp[2], *data;
293 int nr_triplets, data_size, ret = 0;
294 int clock = snd_usb_clock_find_source(chip, fp->clock, false);
295
296 if (clock < 0) {
297 dev_err(&dev->dev,
298 "%s(): unable to find clock source (clock %d)\n",
299 __func__, clock);
300 goto err;
301 }
302
303 /* get the number of sample rates first by only fetching 2 bytes */
304 ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
305 USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
306 UAC2_CS_CONTROL_SAM_FREQ << 8,
307 snd_usb_ctrl_intf(chip) | (clock << 8),
308 tmp, sizeof(tmp));
309
310 if (ret < 0) {
311 dev_err(&dev->dev,
312 "%s(): unable to retrieve number of sample rates (clock %d)\n",
313 __func__, clock);
314 goto err;
315 }
316
317 nr_triplets = (tmp[1] << 8) | tmp[0];
318 data_size = 2 + 12 * nr_triplets;
319 data = kzalloc(data_size, GFP_KERNEL);
320 if (!data) {
321 ret = -ENOMEM;
322 goto err;
323 }
324
325 /* now get the full information */
326 ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
327 USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
328 UAC2_CS_CONTROL_SAM_FREQ << 8,
329 snd_usb_ctrl_intf(chip) | (clock << 8),
330 data, data_size);
331
332 if (ret < 0) {
333 dev_err(&dev->dev,
334 "%s(): unable to retrieve sample rate range (clock %d)\n",
335 __func__, clock);
336 ret = -EINVAL;
337 goto err_free;
338 }
339
340 /* Call the triplet parser, and make sure fp->rate_table is NULL.
341 * We just use the return value to know how many sample rates we
342 * will have to deal with. */
343 kfree(fp->rate_table);
344 fp->rate_table = NULL;
345 fp->nr_rates = parse_uac2_sample_rate_range(chip, fp, nr_triplets, data);
346
347 if (fp->nr_rates == 0) {
348 /* SNDRV_PCM_RATE_CONTINUOUS */
349 ret = 0;
350 goto err_free;
351 }
352
353 fp->rate_table = kmalloc(sizeof(int) * fp->nr_rates, GFP_KERNEL);
354 if (!fp->rate_table) {
355 ret = -ENOMEM;
356 goto err_free;
357 }
358
359 /* Call the triplet parser again, but this time, fp->rate_table is
360 * allocated, so the rates will be stored */
361 parse_uac2_sample_rate_range(chip, fp, nr_triplets, data);
362
363err_free:
364 kfree(data);
365err:
366 return ret;
367}
368
369/*
370 * parse the format type I and III descriptors
371 */
372static int parse_audio_format_i(struct snd_usb_audio *chip,
373 struct audioformat *fp, unsigned int format,
374 struct uac_format_type_i_continuous_descriptor *fmt)
375{
376 snd_pcm_format_t pcm_format;
377 int ret;
378
379 if (fmt->bFormatType == UAC_FORMAT_TYPE_III) {
380 /* FIXME: the format type is really IECxxx
381 * but we give normal PCM format to get the existing
382 * apps working...
383 */
384 switch (chip->usb_id) {
385
386 case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
387 if (chip->setup == 0x00 &&
388 fp->altsetting == 6)
389 pcm_format = SNDRV_PCM_FORMAT_S16_BE;
390 else
391 pcm_format = SNDRV_PCM_FORMAT_S16_LE;
392 break;
393 default:
394 pcm_format = SNDRV_PCM_FORMAT_S16_LE;
395 }
396 fp->formats = pcm_format_to_bits(pcm_format);
397 } else {
398 fp->formats = parse_audio_format_i_type(chip, fp, format, fmt);
399 if (!fp->formats)
400 return -EINVAL;
401 }
402
403 /* gather possible sample rates */
404 /* audio class v1 reports possible sample rates as part of the
405 * proprietary class specific descriptor.
406 * audio class v2 uses class specific EP0 range requests for that.
407 */
408 switch (fp->protocol) {
409 default:
410 case UAC_VERSION_1:
411 fp->channels = fmt->bNrChannels;
412 ret = parse_audio_format_rates_v1(chip, fp, (unsigned char *) fmt, 7);
413 break;
414 case UAC_VERSION_2:
415 /* fp->channels is already set in this case */
416 ret = parse_audio_format_rates_v2(chip, fp);
417 break;
418 }
419
420 if (fp->channels < 1) {
421 usb_audio_err(chip,
422 "%u:%d : invalid channels %d\n",
423 fp->iface, fp->altsetting, fp->channels);
424 return -EINVAL;
425 }
426
427 return ret;
428}
429
430/*
431 * parse the format type II descriptor
432 */
433static int parse_audio_format_ii(struct snd_usb_audio *chip,
434 struct audioformat *fp,
435 int format, void *_fmt)
436{
437 int brate, framesize, ret;
438
439 switch (format) {
440 case UAC_FORMAT_TYPE_II_AC3:
441 /* FIXME: there is no AC3 format defined yet */
442 // fp->formats = SNDRV_PCM_FMTBIT_AC3;
443 fp->formats = SNDRV_PCM_FMTBIT_U8; /* temporary hack to receive byte streams */
444 break;
445 case UAC_FORMAT_TYPE_II_MPEG:
446 fp->formats = SNDRV_PCM_FMTBIT_MPEG;
447 break;
448 default:
449 usb_audio_info(chip,
450 "%u:%d : unknown format tag %#x is detected. processed as MPEG.\n",
451 fp->iface, fp->altsetting, format);
452 fp->formats = SNDRV_PCM_FMTBIT_MPEG;
453 break;
454 }
455
456 fp->channels = 1;
457
458 switch (fp->protocol) {
459 default:
460 case UAC_VERSION_1: {
461 struct uac_format_type_ii_discrete_descriptor *fmt = _fmt;
462 brate = le16_to_cpu(fmt->wMaxBitRate);
463 framesize = le16_to_cpu(fmt->wSamplesPerFrame);
464 usb_audio_info(chip, "found format II with max.bitrate = %d, frame size=%d\n", brate, framesize);
465 fp->frame_size = framesize;
466 ret = parse_audio_format_rates_v1(chip, fp, _fmt, 8); /* fmt[8..] sample rates */
467 break;
468 }
469 case UAC_VERSION_2: {
470 struct uac_format_type_ii_ext_descriptor *fmt = _fmt;
471 brate = le16_to_cpu(fmt->wMaxBitRate);
472 framesize = le16_to_cpu(fmt->wSamplesPerFrame);
473 usb_audio_info(chip, "found format II with max.bitrate = %d, frame size=%d\n", brate, framesize);
474 fp->frame_size = framesize;
475 ret = parse_audio_format_rates_v2(chip, fp);
476 break;
477 }
478 }
479
480 return ret;
481}
482
483int snd_usb_parse_audio_format(struct snd_usb_audio *chip,
484 struct audioformat *fp, unsigned int format,
485 struct uac_format_type_i_continuous_descriptor *fmt,
486 int stream)
487{
488 int err;
489
490 switch (fmt->bFormatType) {
491 case UAC_FORMAT_TYPE_I:
492 case UAC_FORMAT_TYPE_III:
493 err = parse_audio_format_i(chip, fp, format, fmt);
494 break;
495 case UAC_FORMAT_TYPE_II:
496 err = parse_audio_format_ii(chip, fp, format, fmt);
497 break;
498 default:
499 usb_audio_info(chip,
500 "%u:%d : format type %d is not supported yet\n",
501 fp->iface, fp->altsetting,
502 fmt->bFormatType);
503 return -ENOTSUPP;
504 }
505 fp->fmt_type = fmt->bFormatType;
506 if (err < 0)
507 return err;
508#if 1
509 /* FIXME: temporary hack for extigy/audigy 2 nx/zs */
510 /* extigy apparently supports sample rates other than 48k
511 * but not in ordinary way. so we enable only 48k atm.
512 */
513 if (chip->usb_id == USB_ID(0x041e, 0x3000) ||
514 chip->usb_id == USB_ID(0x041e, 0x3020) ||
515 chip->usb_id == USB_ID(0x041e, 0x3061)) {
516 if (fmt->bFormatType == UAC_FORMAT_TYPE_I &&
517 fp->rates != SNDRV_PCM_RATE_48000 &&
518 fp->rates != SNDRV_PCM_RATE_96000)
519 return -ENOTSUPP;
520 }
521#endif
522 return 0;
523}
524