Linux Audio

Check our new training course

Loading...
v5.4
   1// SPDX-License-Identifier: GPL-2.0
   2/* Copyright(c) 2013 - 2018 Intel Corporation. */
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   3
   4/* ethtool support for i40e */
   5
   6#include "i40e.h"
   7#include "i40e_diag.h"
   8#include "i40e_txrx_common.h"
   9
  10/* ethtool statistics helpers */
  11
  12/**
  13 * struct i40e_stats - definition for an ethtool statistic
  14 * @stat_string: statistic name to display in ethtool -S output
  15 * @sizeof_stat: the sizeof() the stat, must be no greater than sizeof(u64)
  16 * @stat_offset: offsetof() the stat from a base pointer
  17 *
  18 * This structure defines a statistic to be added to the ethtool stats buffer.
  19 * It defines a statistic as offset from a common base pointer. Stats should
  20 * be defined in constant arrays using the I40E_STAT macro, with every element
  21 * of the array using the same _type for calculating the sizeof_stat and
  22 * stat_offset.
  23 *
  24 * The @sizeof_stat is expected to be sizeof(u8), sizeof(u16), sizeof(u32) or
  25 * sizeof(u64). Other sizes are not expected and will produce a WARN_ONCE from
  26 * the i40e_add_ethtool_stat() helper function.
  27 *
  28 * The @stat_string is interpreted as a format string, allowing formatted
  29 * values to be inserted while looping over multiple structures for a given
  30 * statistics array. Thus, every statistic string in an array should have the
  31 * same type and number of format specifiers, to be formatted by variadic
  32 * arguments to the i40e_add_stat_string() helper function.
  33 **/
  34struct i40e_stats {
  35	char stat_string[ETH_GSTRING_LEN];
  36	int sizeof_stat;
  37	int stat_offset;
  38};
  39
  40/* Helper macro to define an i40e_stat structure with proper size and type.
  41 * Use this when defining constant statistics arrays. Note that @_type expects
  42 * only a type name and is used multiple times.
  43 */
  44#define I40E_STAT(_type, _name, _stat) { \
  45	.stat_string = _name, \
  46	.sizeof_stat = FIELD_SIZEOF(_type, _stat), \
  47	.stat_offset = offsetof(_type, _stat) \
  48}
  49
  50/* Helper macro for defining some statistics directly copied from the netdev
  51 * stats structure.
  52 */
  53#define I40E_NETDEV_STAT(_net_stat) \
  54	I40E_STAT(struct rtnl_link_stats64, #_net_stat, _net_stat)
  55
  56/* Helper macro for defining some statistics related to queues */
  57#define I40E_QUEUE_STAT(_name, _stat) \
  58	I40E_STAT(struct i40e_ring, _name, _stat)
  59
  60/* Stats associated with a Tx or Rx ring */
  61static const struct i40e_stats i40e_gstrings_queue_stats[] = {
  62	I40E_QUEUE_STAT("%s-%u.packets", stats.packets),
  63	I40E_QUEUE_STAT("%s-%u.bytes", stats.bytes),
  64};
  65
  66/**
  67 * i40e_add_one_ethtool_stat - copy the stat into the supplied buffer
  68 * @data: location to store the stat value
  69 * @pointer: basis for where to copy from
  70 * @stat: the stat definition
  71 *
  72 * Copies the stat data defined by the pointer and stat structure pair into
  73 * the memory supplied as data. Used to implement i40e_add_ethtool_stats and
  74 * i40e_add_queue_stats. If the pointer is null, data will be zero'd.
  75 */
  76static void
  77i40e_add_one_ethtool_stat(u64 *data, void *pointer,
  78			  const struct i40e_stats *stat)
  79{
  80	char *p;
  81
  82	if (!pointer) {
  83		/* ensure that the ethtool data buffer is zero'd for any stats
  84		 * which don't have a valid pointer.
  85		 */
  86		*data = 0;
  87		return;
  88	}
  89
  90	p = (char *)pointer + stat->stat_offset;
  91	switch (stat->sizeof_stat) {
  92	case sizeof(u64):
  93		*data = *((u64 *)p);
  94		break;
  95	case sizeof(u32):
  96		*data = *((u32 *)p);
  97		break;
  98	case sizeof(u16):
  99		*data = *((u16 *)p);
 100		break;
 101	case sizeof(u8):
 102		*data = *((u8 *)p);
 103		break;
 104	default:
 105		WARN_ONCE(1, "unexpected stat size for %s",
 106			  stat->stat_string);
 107		*data = 0;
 108	}
 109}
 110
 111/**
 112 * __i40e_add_ethtool_stats - copy stats into the ethtool supplied buffer
 113 * @data: ethtool stats buffer
 114 * @pointer: location to copy stats from
 115 * @stats: array of stats to copy
 116 * @size: the size of the stats definition
 117 *
 118 * Copy the stats defined by the stats array using the pointer as a base into
 119 * the data buffer supplied by ethtool. Updates the data pointer to point to
 120 * the next empty location for successive calls to __i40e_add_ethtool_stats.
 121 * If pointer is null, set the data values to zero and update the pointer to
 122 * skip these stats.
 123 **/
 124static void
 125__i40e_add_ethtool_stats(u64 **data, void *pointer,
 126			 const struct i40e_stats stats[],
 127			 const unsigned int size)
 128{
 129	unsigned int i;
 130
 131	for (i = 0; i < size; i++)
 132		i40e_add_one_ethtool_stat((*data)++, pointer, &stats[i]);
 133}
 134
 135/**
 136 * i40e_add_ethtool_stats - copy stats into ethtool supplied buffer
 137 * @data: ethtool stats buffer
 138 * @pointer: location where stats are stored
 139 * @stats: static const array of stat definitions
 140 *
 141 * Macro to ease the use of __i40e_add_ethtool_stats by taking a static
 142 * constant stats array and passing the ARRAY_SIZE(). This avoids typos by
 143 * ensuring that we pass the size associated with the given stats array.
 144 *
 145 * The parameter @stats is evaluated twice, so parameters with side effects
 146 * should be avoided.
 147 **/
 148#define i40e_add_ethtool_stats(data, pointer, stats) \
 149	__i40e_add_ethtool_stats(data, pointer, stats, ARRAY_SIZE(stats))
 150
 151/**
 152 * i40e_add_queue_stats - copy queue statistics into supplied buffer
 153 * @data: ethtool stats buffer
 154 * @ring: the ring to copy
 155 *
 156 * Queue statistics must be copied while protected by
 157 * u64_stats_fetch_begin_irq, so we can't directly use i40e_add_ethtool_stats.
 158 * Assumes that queue stats are defined in i40e_gstrings_queue_stats. If the
 159 * ring pointer is null, zero out the queue stat values and update the data
 160 * pointer. Otherwise safely copy the stats from the ring into the supplied
 161 * buffer and update the data pointer when finished.
 162 *
 163 * This function expects to be called while under rcu_read_lock().
 164 **/
 165static void
 166i40e_add_queue_stats(u64 **data, struct i40e_ring *ring)
 167{
 168	const unsigned int size = ARRAY_SIZE(i40e_gstrings_queue_stats);
 169	const struct i40e_stats *stats = i40e_gstrings_queue_stats;
 170	unsigned int start;
 171	unsigned int i;
 172
 173	/* To avoid invalid statistics values, ensure that we keep retrying
 174	 * the copy until we get a consistent value according to
 175	 * u64_stats_fetch_retry_irq. But first, make sure our ring is
 176	 * non-null before attempting to access its syncp.
 177	 */
 178	do {
 179		start = !ring ? 0 : u64_stats_fetch_begin_irq(&ring->syncp);
 180		for (i = 0; i < size; i++) {
 181			i40e_add_one_ethtool_stat(&(*data)[i], ring,
 182						  &stats[i]);
 183		}
 184	} while (ring && u64_stats_fetch_retry_irq(&ring->syncp, start));
 185
 186	/* Once we successfully copy the stats in, update the data pointer */
 187	*data += size;
 188}
 189
 190/**
 191 * __i40e_add_stat_strings - copy stat strings into ethtool buffer
 192 * @p: ethtool supplied buffer
 193 * @stats: stat definitions array
 194 * @size: size of the stats array
 195 *
 196 * Format and copy the strings described by stats into the buffer pointed at
 197 * by p.
 198 **/
 199static void __i40e_add_stat_strings(u8 **p, const struct i40e_stats stats[],
 200				    const unsigned int size, ...)
 201{
 202	unsigned int i;
 203
 204	for (i = 0; i < size; i++) {
 205		va_list args;
 206
 207		va_start(args, size);
 208		vsnprintf(*p, ETH_GSTRING_LEN, stats[i].stat_string, args);
 209		*p += ETH_GSTRING_LEN;
 210		va_end(args);
 211	}
 212}
 213
 214/**
 215 * 40e_add_stat_strings - copy stat strings into ethtool buffer
 216 * @p: ethtool supplied buffer
 217 * @stats: stat definitions array
 218 *
 219 * Format and copy the strings described by the const static stats value into
 220 * the buffer pointed at by p.
 221 *
 222 * The parameter @stats is evaluated twice, so parameters with side effects
 223 * should be avoided. Additionally, stats must be an array such that
 224 * ARRAY_SIZE can be called on it.
 225 **/
 226#define i40e_add_stat_strings(p, stats, ...) \
 227	__i40e_add_stat_strings(p, stats, ARRAY_SIZE(stats), ## __VA_ARGS__)
 228
 229#define I40E_PF_STAT(_name, _stat) \
 230	I40E_STAT(struct i40e_pf, _name, _stat)
 231#define I40E_VSI_STAT(_name, _stat) \
 232	I40E_STAT(struct i40e_vsi, _name, _stat)
 233#define I40E_VEB_STAT(_name, _stat) \
 234	I40E_STAT(struct i40e_veb, _name, _stat)
 235#define I40E_PFC_STAT(_name, _stat) \
 236	I40E_STAT(struct i40e_pfc_stats, _name, _stat)
 237#define I40E_QUEUE_STAT(_name, _stat) \
 238	I40E_STAT(struct i40e_ring, _name, _stat)
 239
 240static const struct i40e_stats i40e_gstrings_net_stats[] = {
 241	I40E_NETDEV_STAT(rx_packets),
 242	I40E_NETDEV_STAT(tx_packets),
 243	I40E_NETDEV_STAT(rx_bytes),
 244	I40E_NETDEV_STAT(tx_bytes),
 245	I40E_NETDEV_STAT(rx_errors),
 246	I40E_NETDEV_STAT(tx_errors),
 247	I40E_NETDEV_STAT(rx_dropped),
 248	I40E_NETDEV_STAT(tx_dropped),
 249	I40E_NETDEV_STAT(collisions),
 250	I40E_NETDEV_STAT(rx_length_errors),
 251	I40E_NETDEV_STAT(rx_crc_errors),
 252};
 253
 254static const struct i40e_stats i40e_gstrings_veb_stats[] = {
 255	I40E_VEB_STAT("veb.rx_bytes", stats.rx_bytes),
 256	I40E_VEB_STAT("veb.tx_bytes", stats.tx_bytes),
 257	I40E_VEB_STAT("veb.rx_unicast", stats.rx_unicast),
 258	I40E_VEB_STAT("veb.tx_unicast", stats.tx_unicast),
 259	I40E_VEB_STAT("veb.rx_multicast", stats.rx_multicast),
 260	I40E_VEB_STAT("veb.tx_multicast", stats.tx_multicast),
 261	I40E_VEB_STAT("veb.rx_broadcast", stats.rx_broadcast),
 262	I40E_VEB_STAT("veb.tx_broadcast", stats.tx_broadcast),
 263	I40E_VEB_STAT("veb.rx_discards", stats.rx_discards),
 264	I40E_VEB_STAT("veb.tx_discards", stats.tx_discards),
 265	I40E_VEB_STAT("veb.tx_errors", stats.tx_errors),
 266	I40E_VEB_STAT("veb.rx_unknown_protocol", stats.rx_unknown_protocol),
 267};
 268
 269static const struct i40e_stats i40e_gstrings_veb_tc_stats[] = {
 270	I40E_VEB_STAT("veb.tc_%u_tx_packets", tc_stats.tc_tx_packets),
 271	I40E_VEB_STAT("veb.tc_%u_tx_bytes", tc_stats.tc_tx_bytes),
 272	I40E_VEB_STAT("veb.tc_%u_rx_packets", tc_stats.tc_rx_packets),
 273	I40E_VEB_STAT("veb.tc_%u_rx_bytes", tc_stats.tc_rx_bytes),
 274};
 275
 276static const struct i40e_stats i40e_gstrings_misc_stats[] = {
 277	I40E_VSI_STAT("rx_unicast", eth_stats.rx_unicast),
 278	I40E_VSI_STAT("tx_unicast", eth_stats.tx_unicast),
 279	I40E_VSI_STAT("rx_multicast", eth_stats.rx_multicast),
 280	I40E_VSI_STAT("tx_multicast", eth_stats.tx_multicast),
 281	I40E_VSI_STAT("rx_broadcast", eth_stats.rx_broadcast),
 282	I40E_VSI_STAT("tx_broadcast", eth_stats.tx_broadcast),
 283	I40E_VSI_STAT("rx_unknown_protocol", eth_stats.rx_unknown_protocol),
 284	I40E_VSI_STAT("tx_linearize", tx_linearize),
 285	I40E_VSI_STAT("tx_force_wb", tx_force_wb),
 286	I40E_VSI_STAT("tx_busy", tx_busy),
 287	I40E_VSI_STAT("rx_alloc_fail", rx_buf_failed),
 288	I40E_VSI_STAT("rx_pg_alloc_fail", rx_page_failed),
 289};
 290
 291/* These PF_STATs might look like duplicates of some NETDEV_STATs,
 292 * but they are separate.  This device supports Virtualization, and
 293 * as such might have several netdevs supporting VMDq and FCoE going
 294 * through a single port.  The NETDEV_STATs are for individual netdevs
 295 * seen at the top of the stack, and the PF_STATs are for the physical
 296 * function at the bottom of the stack hosting those netdevs.
 297 *
 298 * The PF_STATs are appended to the netdev stats only when ethtool -S
 299 * is queried on the base PF netdev, not on the VMDq or FCoE netdev.
 300 */
 301static const struct i40e_stats i40e_gstrings_stats[] = {
 302	I40E_PF_STAT("port.rx_bytes", stats.eth.rx_bytes),
 303	I40E_PF_STAT("port.tx_bytes", stats.eth.tx_bytes),
 304	I40E_PF_STAT("port.rx_unicast", stats.eth.rx_unicast),
 305	I40E_PF_STAT("port.tx_unicast", stats.eth.tx_unicast),
 306	I40E_PF_STAT("port.rx_multicast", stats.eth.rx_multicast),
 307	I40E_PF_STAT("port.tx_multicast", stats.eth.tx_multicast),
 308	I40E_PF_STAT("port.rx_broadcast", stats.eth.rx_broadcast),
 309	I40E_PF_STAT("port.tx_broadcast", stats.eth.tx_broadcast),
 310	I40E_PF_STAT("port.tx_errors", stats.eth.tx_errors),
 311	I40E_PF_STAT("port.rx_dropped", stats.eth.rx_discards),
 312	I40E_PF_STAT("port.tx_dropped_link_down", stats.tx_dropped_link_down),
 313	I40E_PF_STAT("port.rx_crc_errors", stats.crc_errors),
 314	I40E_PF_STAT("port.illegal_bytes", stats.illegal_bytes),
 315	I40E_PF_STAT("port.mac_local_faults", stats.mac_local_faults),
 316	I40E_PF_STAT("port.mac_remote_faults", stats.mac_remote_faults),
 317	I40E_PF_STAT("port.tx_timeout", tx_timeout_count),
 318	I40E_PF_STAT("port.rx_csum_bad", hw_csum_rx_error),
 319	I40E_PF_STAT("port.rx_length_errors", stats.rx_length_errors),
 320	I40E_PF_STAT("port.link_xon_rx", stats.link_xon_rx),
 321	I40E_PF_STAT("port.link_xoff_rx", stats.link_xoff_rx),
 322	I40E_PF_STAT("port.link_xon_tx", stats.link_xon_tx),
 323	I40E_PF_STAT("port.link_xoff_tx", stats.link_xoff_tx),
 324	I40E_PF_STAT("port.rx_size_64", stats.rx_size_64),
 325	I40E_PF_STAT("port.rx_size_127", stats.rx_size_127),
 326	I40E_PF_STAT("port.rx_size_255", stats.rx_size_255),
 327	I40E_PF_STAT("port.rx_size_511", stats.rx_size_511),
 328	I40E_PF_STAT("port.rx_size_1023", stats.rx_size_1023),
 329	I40E_PF_STAT("port.rx_size_1522", stats.rx_size_1522),
 330	I40E_PF_STAT("port.rx_size_big", stats.rx_size_big),
 331	I40E_PF_STAT("port.tx_size_64", stats.tx_size_64),
 332	I40E_PF_STAT("port.tx_size_127", stats.tx_size_127),
 333	I40E_PF_STAT("port.tx_size_255", stats.tx_size_255),
 334	I40E_PF_STAT("port.tx_size_511", stats.tx_size_511),
 335	I40E_PF_STAT("port.tx_size_1023", stats.tx_size_1023),
 336	I40E_PF_STAT("port.tx_size_1522", stats.tx_size_1522),
 337	I40E_PF_STAT("port.tx_size_big", stats.tx_size_big),
 338	I40E_PF_STAT("port.rx_undersize", stats.rx_undersize),
 339	I40E_PF_STAT("port.rx_fragments", stats.rx_fragments),
 340	I40E_PF_STAT("port.rx_oversize", stats.rx_oversize),
 341	I40E_PF_STAT("port.rx_jabber", stats.rx_jabber),
 342	I40E_PF_STAT("port.VF_admin_queue_requests", vf_aq_requests),
 343	I40E_PF_STAT("port.arq_overflows", arq_overflows),
 344	I40E_PF_STAT("port.tx_hwtstamp_timeouts", tx_hwtstamp_timeouts),
 345	I40E_PF_STAT("port.rx_hwtstamp_cleared", rx_hwtstamp_cleared),
 346	I40E_PF_STAT("port.tx_hwtstamp_skipped", tx_hwtstamp_skipped),
 347	I40E_PF_STAT("port.fdir_flush_cnt", fd_flush_cnt),
 348	I40E_PF_STAT("port.fdir_atr_match", stats.fd_atr_match),
 349	I40E_PF_STAT("port.fdir_atr_tunnel_match", stats.fd_atr_tunnel_match),
 350	I40E_PF_STAT("port.fdir_atr_status", stats.fd_atr_status),
 351	I40E_PF_STAT("port.fdir_sb_match", stats.fd_sb_match),
 352	I40E_PF_STAT("port.fdir_sb_status", stats.fd_sb_status),
 353
 354	/* LPI stats */
 355	I40E_PF_STAT("port.tx_lpi_status", stats.tx_lpi_status),
 356	I40E_PF_STAT("port.rx_lpi_status", stats.rx_lpi_status),
 357	I40E_PF_STAT("port.tx_lpi_count", stats.tx_lpi_count),
 358	I40E_PF_STAT("port.rx_lpi_count", stats.rx_lpi_count),
 359};
 360
 361struct i40e_pfc_stats {
 362	u64 priority_xon_rx;
 363	u64 priority_xoff_rx;
 364	u64 priority_xon_tx;
 365	u64 priority_xoff_tx;
 366	u64 priority_xon_2_xoff;
 367};
 368
 369static const struct i40e_stats i40e_gstrings_pfc_stats[] = {
 370	I40E_PFC_STAT("port.tx_priority_%u_xon_tx", priority_xon_tx),
 371	I40E_PFC_STAT("port.tx_priority_%u_xoff_tx", priority_xoff_tx),
 372	I40E_PFC_STAT("port.rx_priority_%u_xon_rx", priority_xon_rx),
 373	I40E_PFC_STAT("port.rx_priority_%u_xoff_rx", priority_xoff_rx),
 374	I40E_PFC_STAT("port.rx_priority_%u_xon_2_xoff", priority_xon_2_xoff),
 
 
 
 
 375};
 376
 377#define I40E_NETDEV_STATS_LEN	ARRAY_SIZE(i40e_gstrings_net_stats)
 378
 379#define I40E_MISC_STATS_LEN	ARRAY_SIZE(i40e_gstrings_misc_stats)
 380
 381#define I40E_VSI_STATS_LEN	(I40E_NETDEV_STATS_LEN + I40E_MISC_STATS_LEN)
 382
 383#define I40E_PFC_STATS_LEN	(ARRAY_SIZE(i40e_gstrings_pfc_stats) * \
 384				 I40E_MAX_USER_PRIORITY)
 385
 386#define I40E_VEB_STATS_LEN	(ARRAY_SIZE(i40e_gstrings_veb_stats) + \
 387				 (ARRAY_SIZE(i40e_gstrings_veb_tc_stats) * \
 388				  I40E_MAX_TRAFFIC_CLASS))
 389
 390#define I40E_GLOBAL_STATS_LEN	ARRAY_SIZE(i40e_gstrings_stats)
 391
 392#define I40E_PF_STATS_LEN	(I40E_GLOBAL_STATS_LEN + \
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 393				 I40E_PFC_STATS_LEN + \
 394				 I40E_VEB_STATS_LEN + \
 395				 I40E_VSI_STATS_LEN)
 396
 397/* Length of stats for a single queue */
 398#define I40E_QUEUE_STATS_LEN	ARRAY_SIZE(i40e_gstrings_queue_stats)
 399
 400enum i40e_ethtool_test_id {
 401	I40E_ETH_TEST_REG = 0,
 402	I40E_ETH_TEST_EEPROM,
 403	I40E_ETH_TEST_INTR,
 
 404	I40E_ETH_TEST_LINK,
 405};
 406
 407static const char i40e_gstrings_test[][ETH_GSTRING_LEN] = {
 408	"Register test  (offline)",
 409	"Eeprom test    (offline)",
 410	"Interrupt test (offline)",
 
 411	"Link test   (on/offline)"
 412};
 413
 414#define I40E_TEST_LEN (sizeof(i40e_gstrings_test) / ETH_GSTRING_LEN)
 415
 416struct i40e_priv_flags {
 417	char flag_string[ETH_GSTRING_LEN];
 418	u64 flag;
 419	bool read_only;
 420};
 421
 422#define I40E_PRIV_FLAG(_name, _flag, _read_only) { \
 423	.flag_string = _name, \
 424	.flag = _flag, \
 425	.read_only = _read_only, \
 426}
 427
 428static const struct i40e_priv_flags i40e_gstrings_priv_flags[] = {
 429	/* NOTE: MFP setting cannot be changed */
 430	I40E_PRIV_FLAG("MFP", I40E_FLAG_MFP_ENABLED, 1),
 431	I40E_PRIV_FLAG("LinkPolling", I40E_FLAG_LINK_POLLING_ENABLED, 0),
 432	I40E_PRIV_FLAG("flow-director-atr", I40E_FLAG_FD_ATR_ENABLED, 0),
 433	I40E_PRIV_FLAG("veb-stats", I40E_FLAG_VEB_STATS_ENABLED, 0),
 434	I40E_PRIV_FLAG("hw-atr-eviction", I40E_FLAG_HW_ATR_EVICT_ENABLED, 0),
 435	I40E_PRIV_FLAG("link-down-on-close",
 436		       I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED, 0),
 437	I40E_PRIV_FLAG("legacy-rx", I40E_FLAG_LEGACY_RX, 0),
 438	I40E_PRIV_FLAG("disable-source-pruning",
 439		       I40E_FLAG_SOURCE_PRUNING_DISABLED, 0),
 440	I40E_PRIV_FLAG("disable-fw-lldp", I40E_FLAG_DISABLE_FW_LLDP, 0),
 441	I40E_PRIV_FLAG("rs-fec", I40E_FLAG_RS_FEC, 0),
 442	I40E_PRIV_FLAG("base-r-fec", I40E_FLAG_BASE_R_FEC, 0),
 443};
 444
 445#define I40E_PRIV_FLAGS_STR_LEN ARRAY_SIZE(i40e_gstrings_priv_flags)
 446
 447/* Private flags with a global effect, restricted to PF 0 */
 448static const struct i40e_priv_flags i40e_gl_gstrings_priv_flags[] = {
 449	I40E_PRIV_FLAG("vf-true-promisc-support",
 450		       I40E_FLAG_TRUE_PROMISC_SUPPORT, 0),
 451};
 452
 453#define I40E_GL_PRIV_FLAGS_STR_LEN ARRAY_SIZE(i40e_gl_gstrings_priv_flags)
 454
 455/**
 456 * i40e_partition_setting_complaint - generic complaint for MFP restriction
 457 * @pf: the PF struct
 458 **/
 459static void i40e_partition_setting_complaint(struct i40e_pf *pf)
 460{
 461	dev_info(&pf->pdev->dev,
 462		 "The link settings are allowed to be changed only from the first partition of a given port. Please switch to the first partition in order to change the setting.\n");
 463}
 464
 465/**
 466 * i40e_phy_type_to_ethtool - convert the phy_types to ethtool link modes
 467 * @pf: PF struct with phy_types
 468 * @ks: ethtool link ksettings struct to fill out
 469 *
 470 **/
 471static void i40e_phy_type_to_ethtool(struct i40e_pf *pf,
 472				     struct ethtool_link_ksettings *ks)
 473{
 474	struct i40e_link_status *hw_link_info = &pf->hw.phy.link_info;
 475	u64 phy_types = pf->hw.phy.phy_types;
 476
 477	ethtool_link_ksettings_zero_link_mode(ks, supported);
 478	ethtool_link_ksettings_zero_link_mode(ks, advertising);
 479
 480	if (phy_types & I40E_CAP_PHY_TYPE_SGMII) {
 481		ethtool_link_ksettings_add_link_mode(ks, supported,
 482						     1000baseT_Full);
 483		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
 484			ethtool_link_ksettings_add_link_mode(ks, advertising,
 485							     1000baseT_Full);
 486		if (pf->hw_features & I40E_HW_100M_SGMII_CAPABLE) {
 487			ethtool_link_ksettings_add_link_mode(ks, supported,
 488							     100baseT_Full);
 489			ethtool_link_ksettings_add_link_mode(ks, advertising,
 490							     100baseT_Full);
 491		}
 492	}
 493	if (phy_types & I40E_CAP_PHY_TYPE_XAUI ||
 494	    phy_types & I40E_CAP_PHY_TYPE_XFI ||
 495	    phy_types & I40E_CAP_PHY_TYPE_SFI ||
 496	    phy_types & I40E_CAP_PHY_TYPE_10GBASE_SFPP_CU ||
 497	    phy_types & I40E_CAP_PHY_TYPE_10GBASE_AOC) {
 498		ethtool_link_ksettings_add_link_mode(ks, supported,
 499						     10000baseT_Full);
 500		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
 501			ethtool_link_ksettings_add_link_mode(ks, advertising,
 502							     10000baseT_Full);
 503	}
 504	if (phy_types & I40E_CAP_PHY_TYPE_10GBASE_T) {
 505		ethtool_link_ksettings_add_link_mode(ks, supported,
 506						     10000baseT_Full);
 507		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
 508			ethtool_link_ksettings_add_link_mode(ks, advertising,
 509							     10000baseT_Full);
 510	}
 511	if (phy_types & I40E_CAP_PHY_TYPE_2_5GBASE_T) {
 512		ethtool_link_ksettings_add_link_mode(ks, supported,
 513						     2500baseT_Full);
 514		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_2_5GB)
 515			ethtool_link_ksettings_add_link_mode(ks, advertising,
 516							     2500baseT_Full);
 517	}
 518	if (phy_types & I40E_CAP_PHY_TYPE_5GBASE_T) {
 519		ethtool_link_ksettings_add_link_mode(ks, supported,
 520						     5000baseT_Full);
 521		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_5GB)
 522			ethtool_link_ksettings_add_link_mode(ks, advertising,
 523							     5000baseT_Full);
 524	}
 525	if (phy_types & I40E_CAP_PHY_TYPE_XLAUI ||
 526	    phy_types & I40E_CAP_PHY_TYPE_XLPPI ||
 527	    phy_types & I40E_CAP_PHY_TYPE_40GBASE_AOC)
 528		ethtool_link_ksettings_add_link_mode(ks, supported,
 529						     40000baseCR4_Full);
 530	if (phy_types & I40E_CAP_PHY_TYPE_40GBASE_CR4_CU ||
 531	    phy_types & I40E_CAP_PHY_TYPE_40GBASE_CR4) {
 532		ethtool_link_ksettings_add_link_mode(ks, supported,
 533						     40000baseCR4_Full);
 534		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_40GB)
 535			ethtool_link_ksettings_add_link_mode(ks, advertising,
 536							     40000baseCR4_Full);
 537	}
 538	if (phy_types & I40E_CAP_PHY_TYPE_100BASE_TX) {
 539		ethtool_link_ksettings_add_link_mode(ks, supported,
 540						     100baseT_Full);
 541		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_100MB)
 542			ethtool_link_ksettings_add_link_mode(ks, advertising,
 543							     100baseT_Full);
 544	}
 545	if (phy_types & I40E_CAP_PHY_TYPE_1000BASE_T) {
 546		ethtool_link_ksettings_add_link_mode(ks, supported,
 547						     1000baseT_Full);
 548		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
 549			ethtool_link_ksettings_add_link_mode(ks, advertising,
 550							     1000baseT_Full);
 551	}
 552	if (phy_types & I40E_CAP_PHY_TYPE_40GBASE_SR4) {
 553		ethtool_link_ksettings_add_link_mode(ks, supported,
 554						     40000baseSR4_Full);
 555		ethtool_link_ksettings_add_link_mode(ks, advertising,
 556						     40000baseSR4_Full);
 557	}
 558	if (phy_types & I40E_CAP_PHY_TYPE_40GBASE_LR4) {
 559		ethtool_link_ksettings_add_link_mode(ks, supported,
 560						     40000baseLR4_Full);
 561		ethtool_link_ksettings_add_link_mode(ks, advertising,
 562						     40000baseLR4_Full);
 563	}
 564	if (phy_types & I40E_CAP_PHY_TYPE_40GBASE_KR4) {
 565		ethtool_link_ksettings_add_link_mode(ks, supported,
 566						     40000baseKR4_Full);
 567		ethtool_link_ksettings_add_link_mode(ks, advertising,
 568						     40000baseKR4_Full);
 569	}
 570	if (phy_types & I40E_CAP_PHY_TYPE_20GBASE_KR2) {
 571		ethtool_link_ksettings_add_link_mode(ks, supported,
 572						     20000baseKR2_Full);
 573		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_20GB)
 574			ethtool_link_ksettings_add_link_mode(ks, advertising,
 575							     20000baseKR2_Full);
 576	}
 577	if (phy_types & I40E_CAP_PHY_TYPE_10GBASE_KX4) {
 578		ethtool_link_ksettings_add_link_mode(ks, supported,
 579						     10000baseKX4_Full);
 580		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
 581			ethtool_link_ksettings_add_link_mode(ks, advertising,
 582							     10000baseKX4_Full);
 583	}
 584	if (phy_types & I40E_CAP_PHY_TYPE_10GBASE_KR &&
 585	    !(pf->hw_features & I40E_HW_HAVE_CRT_RETIMER)) {
 586		ethtool_link_ksettings_add_link_mode(ks, supported,
 587						     10000baseKR_Full);
 588		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
 589			ethtool_link_ksettings_add_link_mode(ks, advertising,
 590							     10000baseKR_Full);
 591	}
 592	if (phy_types & I40E_CAP_PHY_TYPE_1000BASE_KX &&
 593	    !(pf->hw_features & I40E_HW_HAVE_CRT_RETIMER)) {
 594		ethtool_link_ksettings_add_link_mode(ks, supported,
 595						     1000baseKX_Full);
 596		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
 597			ethtool_link_ksettings_add_link_mode(ks, advertising,
 598							     1000baseKX_Full);
 599	}
 600	/* need to add 25G PHY types */
 601	if (phy_types & I40E_CAP_PHY_TYPE_25GBASE_KR) {
 602		ethtool_link_ksettings_add_link_mode(ks, supported,
 603						     25000baseKR_Full);
 604		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_25GB)
 605			ethtool_link_ksettings_add_link_mode(ks, advertising,
 606							     25000baseKR_Full);
 607	}
 608	if (phy_types & I40E_CAP_PHY_TYPE_25GBASE_CR) {
 609		ethtool_link_ksettings_add_link_mode(ks, supported,
 610						     25000baseCR_Full);
 611		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_25GB)
 612			ethtool_link_ksettings_add_link_mode(ks, advertising,
 613							     25000baseCR_Full);
 614	}
 615	if (phy_types & I40E_CAP_PHY_TYPE_25GBASE_SR ||
 616	    phy_types & I40E_CAP_PHY_TYPE_25GBASE_LR) {
 617		ethtool_link_ksettings_add_link_mode(ks, supported,
 618						     25000baseSR_Full);
 619		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_25GB)
 620			ethtool_link_ksettings_add_link_mode(ks, advertising,
 621							     25000baseSR_Full);
 622	}
 623	if (phy_types & I40E_CAP_PHY_TYPE_25GBASE_AOC ||
 624	    phy_types & I40E_CAP_PHY_TYPE_25GBASE_ACC) {
 625		ethtool_link_ksettings_add_link_mode(ks, supported,
 626						     25000baseCR_Full);
 627		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_25GB)
 628			ethtool_link_ksettings_add_link_mode(ks, advertising,
 629							     25000baseCR_Full);
 630	}
 631	if (phy_types & I40E_CAP_PHY_TYPE_25GBASE_KR ||
 632	    phy_types & I40E_CAP_PHY_TYPE_25GBASE_CR ||
 633	    phy_types & I40E_CAP_PHY_TYPE_25GBASE_SR ||
 634	    phy_types & I40E_CAP_PHY_TYPE_25GBASE_LR ||
 635	    phy_types & I40E_CAP_PHY_TYPE_25GBASE_AOC ||
 636	    phy_types & I40E_CAP_PHY_TYPE_25GBASE_ACC) {
 637		ethtool_link_ksettings_add_link_mode(ks, supported, FEC_NONE);
 638		ethtool_link_ksettings_add_link_mode(ks, supported, FEC_RS);
 639		ethtool_link_ksettings_add_link_mode(ks, supported, FEC_BASER);
 640		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_25GB) {
 641			ethtool_link_ksettings_add_link_mode(ks, advertising,
 642							     FEC_NONE);
 643			ethtool_link_ksettings_add_link_mode(ks, advertising,
 644							     FEC_RS);
 645			ethtool_link_ksettings_add_link_mode(ks, advertising,
 646							     FEC_BASER);
 647		}
 648	}
 649	/* need to add new 10G PHY types */
 650	if (phy_types & I40E_CAP_PHY_TYPE_10GBASE_CR1 ||
 651	    phy_types & I40E_CAP_PHY_TYPE_10GBASE_CR1_CU) {
 652		ethtool_link_ksettings_add_link_mode(ks, supported,
 653						     10000baseCR_Full);
 654		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
 655			ethtool_link_ksettings_add_link_mode(ks, advertising,
 656							     10000baseCR_Full);
 657	}
 658	if (phy_types & I40E_CAP_PHY_TYPE_10GBASE_SR) {
 659		ethtool_link_ksettings_add_link_mode(ks, supported,
 660						     10000baseSR_Full);
 661		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
 662			ethtool_link_ksettings_add_link_mode(ks, advertising,
 663							     10000baseSR_Full);
 664	}
 665	if (phy_types & I40E_CAP_PHY_TYPE_10GBASE_LR) {
 666		ethtool_link_ksettings_add_link_mode(ks, supported,
 667						     10000baseLR_Full);
 668		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
 669			ethtool_link_ksettings_add_link_mode(ks, advertising,
 670							     10000baseLR_Full);
 671	}
 672	if (phy_types & I40E_CAP_PHY_TYPE_1000BASE_SX ||
 673	    phy_types & I40E_CAP_PHY_TYPE_1000BASE_LX ||
 674	    phy_types & I40E_CAP_PHY_TYPE_1000BASE_T_OPTICAL) {
 675		ethtool_link_ksettings_add_link_mode(ks, supported,
 676						     1000baseX_Full);
 677		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
 678			ethtool_link_ksettings_add_link_mode(ks, advertising,
 679							     1000baseX_Full);
 680	}
 681	/* Autoneg PHY types */
 682	if (phy_types & I40E_CAP_PHY_TYPE_SGMII ||
 683	    phy_types & I40E_CAP_PHY_TYPE_40GBASE_KR4 ||
 684	    phy_types & I40E_CAP_PHY_TYPE_40GBASE_CR4_CU ||
 685	    phy_types & I40E_CAP_PHY_TYPE_40GBASE_CR4 ||
 686	    phy_types & I40E_CAP_PHY_TYPE_25GBASE_SR ||
 687	    phy_types & I40E_CAP_PHY_TYPE_25GBASE_LR ||
 688	    phy_types & I40E_CAP_PHY_TYPE_25GBASE_KR ||
 689	    phy_types & I40E_CAP_PHY_TYPE_25GBASE_CR ||
 690	    phy_types & I40E_CAP_PHY_TYPE_20GBASE_KR2 ||
 691	    phy_types & I40E_CAP_PHY_TYPE_10GBASE_SR ||
 692	    phy_types & I40E_CAP_PHY_TYPE_10GBASE_LR ||
 693	    phy_types & I40E_CAP_PHY_TYPE_10GBASE_KX4 ||
 694	    phy_types & I40E_CAP_PHY_TYPE_10GBASE_KR ||
 695	    phy_types & I40E_CAP_PHY_TYPE_10GBASE_CR1_CU ||
 696	    phy_types & I40E_CAP_PHY_TYPE_10GBASE_CR1 ||
 697	    phy_types & I40E_CAP_PHY_TYPE_10GBASE_T ||
 698	    phy_types & I40E_CAP_PHY_TYPE_5GBASE_T ||
 699	    phy_types & I40E_CAP_PHY_TYPE_2_5GBASE_T ||
 700	    phy_types & I40E_CAP_PHY_TYPE_1000BASE_T_OPTICAL ||
 701	    phy_types & I40E_CAP_PHY_TYPE_1000BASE_T ||
 702	    phy_types & I40E_CAP_PHY_TYPE_1000BASE_SX ||
 703	    phy_types & I40E_CAP_PHY_TYPE_1000BASE_LX ||
 704	    phy_types & I40E_CAP_PHY_TYPE_1000BASE_KX ||
 705	    phy_types & I40E_CAP_PHY_TYPE_100BASE_TX) {
 706		ethtool_link_ksettings_add_link_mode(ks, supported,
 707						     Autoneg);
 708		ethtool_link_ksettings_add_link_mode(ks, advertising,
 709						     Autoneg);
 710	}
 711}
 712
 713/**
 714 * i40e_get_settings_link_up_fec - Get the FEC mode encoding from mask
 715 * @req_fec_info: mask request FEC info
 716 * @ks: ethtool ksettings to fill in
 717 **/
 718static void i40e_get_settings_link_up_fec(u8 req_fec_info,
 719					  struct ethtool_link_ksettings *ks)
 720{
 721	ethtool_link_ksettings_add_link_mode(ks, supported, FEC_NONE);
 722	ethtool_link_ksettings_add_link_mode(ks, supported, FEC_RS);
 723	ethtool_link_ksettings_add_link_mode(ks, supported, FEC_BASER);
 724
 725	if (I40E_AQ_SET_FEC_REQUEST_RS & req_fec_info) {
 726		ethtool_link_ksettings_add_link_mode(ks, advertising, FEC_RS);
 727	} else if (I40E_AQ_SET_FEC_REQUEST_KR & req_fec_info) {
 728		ethtool_link_ksettings_add_link_mode(ks, advertising,
 729						     FEC_BASER);
 730	} else {
 731		ethtool_link_ksettings_add_link_mode(ks, advertising,
 732						     FEC_NONE);
 733		if (I40E_AQ_SET_FEC_AUTO & req_fec_info) {
 734			ethtool_link_ksettings_add_link_mode(ks, advertising,
 735							     FEC_RS);
 736			ethtool_link_ksettings_add_link_mode(ks, advertising,
 737							     FEC_BASER);
 738		}
 739	}
 740}
 741
 742/**
 743 * i40e_get_settings_link_up - Get the Link settings for when link is up
 744 * @hw: hw structure
 745 * @ks: ethtool ksettings to fill in
 746 * @netdev: network interface device structure
 747 * @pf: pointer to physical function struct
 748 **/
 749static void i40e_get_settings_link_up(struct i40e_hw *hw,
 750				      struct ethtool_link_ksettings *ks,
 751				      struct net_device *netdev,
 752				      struct i40e_pf *pf)
 753{
 754	struct i40e_link_status *hw_link_info = &hw->phy.link_info;
 755	struct ethtool_link_ksettings cap_ksettings;
 756	u32 link_speed = hw_link_info->link_speed;
 757
 758	/* Initialize supported and advertised settings based on phy settings */
 759	switch (hw_link_info->phy_type) {
 760	case I40E_PHY_TYPE_40GBASE_CR4:
 761	case I40E_PHY_TYPE_40GBASE_CR4_CU:
 762		ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
 763		ethtool_link_ksettings_add_link_mode(ks, supported,
 764						     40000baseCR4_Full);
 765		ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
 766		ethtool_link_ksettings_add_link_mode(ks, advertising,
 767						     40000baseCR4_Full);
 768		break;
 769	case I40E_PHY_TYPE_XLAUI:
 770	case I40E_PHY_TYPE_XLPPI:
 771	case I40E_PHY_TYPE_40GBASE_AOC:
 772		ethtool_link_ksettings_add_link_mode(ks, supported,
 773						     40000baseCR4_Full);
 774		ethtool_link_ksettings_add_link_mode(ks, advertising,
 775						     40000baseCR4_Full);
 776		break;
 777	case I40E_PHY_TYPE_40GBASE_SR4:
 778		ethtool_link_ksettings_add_link_mode(ks, supported,
 779						     40000baseSR4_Full);
 780		ethtool_link_ksettings_add_link_mode(ks, advertising,
 781						     40000baseSR4_Full);
 782		break;
 783	case I40E_PHY_TYPE_40GBASE_LR4:
 784		ethtool_link_ksettings_add_link_mode(ks, supported,
 785						     40000baseLR4_Full);
 786		ethtool_link_ksettings_add_link_mode(ks, advertising,
 787						     40000baseLR4_Full);
 788		break;
 789	case I40E_PHY_TYPE_25GBASE_SR:
 790	case I40E_PHY_TYPE_25GBASE_LR:
 791	case I40E_PHY_TYPE_10GBASE_SR:
 792	case I40E_PHY_TYPE_10GBASE_LR:
 793	case I40E_PHY_TYPE_1000BASE_SX:
 794	case I40E_PHY_TYPE_1000BASE_LX:
 795		ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
 796		ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
 797		ethtool_link_ksettings_add_link_mode(ks, supported,
 798						     25000baseSR_Full);
 799		ethtool_link_ksettings_add_link_mode(ks, advertising,
 800						     25000baseSR_Full);
 801		i40e_get_settings_link_up_fec(hw_link_info->req_fec_info, ks);
 802		ethtool_link_ksettings_add_link_mode(ks, supported,
 803						     10000baseSR_Full);
 804		ethtool_link_ksettings_add_link_mode(ks, advertising,
 805						     10000baseSR_Full);
 806		ethtool_link_ksettings_add_link_mode(ks, supported,
 807						     10000baseLR_Full);
 808		ethtool_link_ksettings_add_link_mode(ks, advertising,
 809						     10000baseLR_Full);
 810		ethtool_link_ksettings_add_link_mode(ks, supported,
 811						     1000baseX_Full);
 812		ethtool_link_ksettings_add_link_mode(ks, advertising,
 813						     1000baseX_Full);
 814		ethtool_link_ksettings_add_link_mode(ks, supported,
 815						     10000baseT_Full);
 816		if (hw_link_info->module_type[2] &
 817		    I40E_MODULE_TYPE_1000BASE_SX ||
 818		    hw_link_info->module_type[2] &
 819		    I40E_MODULE_TYPE_1000BASE_LX) {
 820			ethtool_link_ksettings_add_link_mode(ks, supported,
 821							     1000baseT_Full);
 822			if (hw_link_info->requested_speeds &
 823			    I40E_LINK_SPEED_1GB)
 824				ethtool_link_ksettings_add_link_mode(
 825				     ks, advertising, 1000baseT_Full);
 826		}
 827		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
 828			ethtool_link_ksettings_add_link_mode(ks, advertising,
 829							     10000baseT_Full);
 830		break;
 831	case I40E_PHY_TYPE_10GBASE_T:
 832	case I40E_PHY_TYPE_5GBASE_T:
 833	case I40E_PHY_TYPE_2_5GBASE_T:
 834	case I40E_PHY_TYPE_1000BASE_T:
 835	case I40E_PHY_TYPE_100BASE_TX:
 836		ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
 837		ethtool_link_ksettings_add_link_mode(ks, supported,
 838						     10000baseT_Full);
 839		ethtool_link_ksettings_add_link_mode(ks, supported,
 840						     5000baseT_Full);
 841		ethtool_link_ksettings_add_link_mode(ks, supported,
 842						     2500baseT_Full);
 843		ethtool_link_ksettings_add_link_mode(ks, supported,
 844						     1000baseT_Full);
 845		ethtool_link_ksettings_add_link_mode(ks, supported,
 846						     100baseT_Full);
 847		ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
 848		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
 849			ethtool_link_ksettings_add_link_mode(ks, advertising,
 850							     10000baseT_Full);
 851		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_5GB)
 852			ethtool_link_ksettings_add_link_mode(ks, advertising,
 853							     5000baseT_Full);
 854		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_2_5GB)
 855			ethtool_link_ksettings_add_link_mode(ks, advertising,
 856							     2500baseT_Full);
 857		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
 858			ethtool_link_ksettings_add_link_mode(ks, advertising,
 859							     1000baseT_Full);
 860		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_100MB)
 861			ethtool_link_ksettings_add_link_mode(ks, advertising,
 862							     100baseT_Full);
 863		break;
 864	case I40E_PHY_TYPE_1000BASE_T_OPTICAL:
 865		ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
 866		ethtool_link_ksettings_add_link_mode(ks, supported,
 867						     1000baseT_Full);
 868		ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
 869		ethtool_link_ksettings_add_link_mode(ks, advertising,
 870						     1000baseT_Full);
 
 
 
 
 871		break;
 872	case I40E_PHY_TYPE_10GBASE_CR1_CU:
 873	case I40E_PHY_TYPE_10GBASE_CR1:
 874		ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
 875		ethtool_link_ksettings_add_link_mode(ks, supported,
 876						     10000baseT_Full);
 877		ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
 878		ethtool_link_ksettings_add_link_mode(ks, advertising,
 879						     10000baseT_Full);
 880		break;
 881	case I40E_PHY_TYPE_XAUI:
 882	case I40E_PHY_TYPE_XFI:
 883	case I40E_PHY_TYPE_SFI:
 884	case I40E_PHY_TYPE_10GBASE_SFPP_CU:
 885	case I40E_PHY_TYPE_10GBASE_AOC:
 886		ethtool_link_ksettings_add_link_mode(ks, supported,
 887						     10000baseT_Full);
 888		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
 889			ethtool_link_ksettings_add_link_mode(ks, advertising,
 890							     10000baseT_Full);
 891		break;
 892	case I40E_PHY_TYPE_SGMII:
 893		ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
 894		ethtool_link_ksettings_add_link_mode(ks, supported,
 895						     1000baseT_Full);
 896		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
 897			ethtool_link_ksettings_add_link_mode(ks, advertising,
 898							     1000baseT_Full);
 899		if (pf->hw_features & I40E_HW_100M_SGMII_CAPABLE) {
 900			ethtool_link_ksettings_add_link_mode(ks, supported,
 901							     100baseT_Full);
 902			if (hw_link_info->requested_speeds &
 903			    I40E_LINK_SPEED_100MB)
 904				ethtool_link_ksettings_add_link_mode(
 905				      ks, advertising, 100baseT_Full);
 906		}
 907		break;
 
 
 
 908	case I40E_PHY_TYPE_40GBASE_KR4:
 909	case I40E_PHY_TYPE_25GBASE_KR:
 910	case I40E_PHY_TYPE_20GBASE_KR2:
 911	case I40E_PHY_TYPE_10GBASE_KR:
 912	case I40E_PHY_TYPE_10GBASE_KX4:
 913	case I40E_PHY_TYPE_1000BASE_KX:
 914		ethtool_link_ksettings_add_link_mode(ks, supported,
 915						     40000baseKR4_Full);
 916		ethtool_link_ksettings_add_link_mode(ks, supported,
 917						     25000baseKR_Full);
 918		ethtool_link_ksettings_add_link_mode(ks, supported,
 919						     20000baseKR2_Full);
 920		ethtool_link_ksettings_add_link_mode(ks, supported,
 921						     10000baseKR_Full);
 922		ethtool_link_ksettings_add_link_mode(ks, supported,
 923						     10000baseKX4_Full);
 924		ethtool_link_ksettings_add_link_mode(ks, supported,
 925						     1000baseKX_Full);
 926		ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
 927		ethtool_link_ksettings_add_link_mode(ks, advertising,
 928						     40000baseKR4_Full);
 929		ethtool_link_ksettings_add_link_mode(ks, advertising,
 930						     25000baseKR_Full);
 931		i40e_get_settings_link_up_fec(hw_link_info->req_fec_info, ks);
 932		ethtool_link_ksettings_add_link_mode(ks, advertising,
 933						     20000baseKR2_Full);
 934		ethtool_link_ksettings_add_link_mode(ks, advertising,
 935						     10000baseKR_Full);
 936		ethtool_link_ksettings_add_link_mode(ks, advertising,
 937						     10000baseKX4_Full);
 938		ethtool_link_ksettings_add_link_mode(ks, advertising,
 939						     1000baseKX_Full);
 940		ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
 941		break;
 942	case I40E_PHY_TYPE_25GBASE_CR:
 943		ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
 944		ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
 945		ethtool_link_ksettings_add_link_mode(ks, supported,
 946						     25000baseCR_Full);
 947		ethtool_link_ksettings_add_link_mode(ks, advertising,
 948						     25000baseCR_Full);
 949		i40e_get_settings_link_up_fec(hw_link_info->req_fec_info, ks);
 950
 951		break;
 952	case I40E_PHY_TYPE_25GBASE_AOC:
 953	case I40E_PHY_TYPE_25GBASE_ACC:
 954		ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
 955		ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
 956		ethtool_link_ksettings_add_link_mode(ks, supported,
 957						     25000baseCR_Full);
 958		ethtool_link_ksettings_add_link_mode(ks, advertising,
 959						     25000baseCR_Full);
 960		i40e_get_settings_link_up_fec(hw_link_info->req_fec_info, ks);
 961
 962		ethtool_link_ksettings_add_link_mode(ks, supported,
 963						     10000baseCR_Full);
 964		ethtool_link_ksettings_add_link_mode(ks, advertising,
 965						     10000baseCR_Full);
 966		break;
 967	default:
 968		/* if we got here and link is up something bad is afoot */
 969		netdev_info(netdev,
 970			    "WARNING: Link is up but PHY type 0x%x is not recognized.\n",
 971			    hw_link_info->phy_type);
 972	}
 973
 974	/* Now that we've worked out everything that could be supported by the
 975	 * current PHY type, get what is supported by the NVM and intersect
 976	 * them to get what is truly supported
 977	 */
 978	memset(&cap_ksettings, 0, sizeof(struct ethtool_link_ksettings));
 979	i40e_phy_type_to_ethtool(pf, &cap_ksettings);
 980	ethtool_intersect_link_masks(ks, &cap_ksettings);
 981
 982	/* Set speed and duplex */
 983	switch (link_speed) {
 984	case I40E_LINK_SPEED_40GB:
 985		ks->base.speed = SPEED_40000;
 986		break;
 987	case I40E_LINK_SPEED_25GB:
 988		ks->base.speed = SPEED_25000;
 989		break;
 990	case I40E_LINK_SPEED_20GB:
 991		ks->base.speed = SPEED_20000;
 992		break;
 993	case I40E_LINK_SPEED_10GB:
 994		ks->base.speed = SPEED_10000;
 995		break;
 996	case I40E_LINK_SPEED_5GB:
 997		ks->base.speed = SPEED_5000;
 998		break;
 999	case I40E_LINK_SPEED_2_5GB:
1000		ks->base.speed = SPEED_2500;
1001		break;
1002	case I40E_LINK_SPEED_1GB:
1003		ks->base.speed = SPEED_1000;
1004		break;
1005	case I40E_LINK_SPEED_100MB:
1006		ks->base.speed = SPEED_100;
1007		break;
1008	default:
1009		ks->base.speed = SPEED_UNKNOWN;
1010		break;
1011	}
1012	ks->base.duplex = DUPLEX_FULL;
1013}
1014
1015/**
1016 * i40e_get_settings_link_down - Get the Link settings for when link is down
1017 * @hw: hw structure
1018 * @ks: ethtool ksettings to fill in
1019 * @pf: pointer to physical function struct
1020 *
1021 * Reports link settings that can be determined when link is down
1022 **/
1023static void i40e_get_settings_link_down(struct i40e_hw *hw,
1024					struct ethtool_link_ksettings *ks,
1025					struct i40e_pf *pf)
1026{
 
 
1027	/* link is down and the driver needs to fall back on
1028	 * supported phy types to figure out what info to display
1029	 */
1030	i40e_phy_type_to_ethtool(pf, ks);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1031
1032	/* With no link speed and duplex are unknown */
1033	ks->base.speed = SPEED_UNKNOWN;
1034	ks->base.duplex = DUPLEX_UNKNOWN;
1035}
1036
1037/**
1038 * i40e_get_link_ksettings - Get Link Speed and Duplex settings
1039 * @netdev: network interface device structure
1040 * @ks: ethtool ksettings
1041 *
1042 * Reports speed/duplex settings based on media_type
1043 **/
1044static int i40e_get_link_ksettings(struct net_device *netdev,
1045				   struct ethtool_link_ksettings *ks)
1046{
1047	struct i40e_netdev_priv *np = netdev_priv(netdev);
1048	struct i40e_pf *pf = np->vsi->back;
1049	struct i40e_hw *hw = &pf->hw;
1050	struct i40e_link_status *hw_link_info = &hw->phy.link_info;
1051	bool link_up = hw_link_info->link_info & I40E_AQ_LINK_UP;
1052
1053	ethtool_link_ksettings_zero_link_mode(ks, supported);
1054	ethtool_link_ksettings_zero_link_mode(ks, advertising);
1055
1056	if (link_up)
1057		i40e_get_settings_link_up(hw, ks, netdev, pf);
1058	else
1059		i40e_get_settings_link_down(hw, ks, pf);
1060
1061	/* Now set the settings that don't rely on link being up/down */
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1062	/* Set autoneg settings */
1063	ks->base.autoneg = ((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ?
1064			    AUTONEG_ENABLE : AUTONEG_DISABLE);
1065
1066	/* Set media type settings */
1067	switch (hw->phy.media_type) {
1068	case I40E_MEDIA_TYPE_BACKPLANE:
1069		ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
1070		ethtool_link_ksettings_add_link_mode(ks, supported, Backplane);
1071		ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
1072		ethtool_link_ksettings_add_link_mode(ks, advertising,
1073						     Backplane);
1074		ks->base.port = PORT_NONE;
1075		break;
1076	case I40E_MEDIA_TYPE_BASET:
1077		ethtool_link_ksettings_add_link_mode(ks, supported, TP);
1078		ethtool_link_ksettings_add_link_mode(ks, advertising, TP);
1079		ks->base.port = PORT_TP;
1080		break;
1081	case I40E_MEDIA_TYPE_DA:
1082	case I40E_MEDIA_TYPE_CX4:
1083		ethtool_link_ksettings_add_link_mode(ks, supported, FIBRE);
1084		ethtool_link_ksettings_add_link_mode(ks, advertising, FIBRE);
1085		ks->base.port = PORT_DA;
1086		break;
1087	case I40E_MEDIA_TYPE_FIBER:
1088		ethtool_link_ksettings_add_link_mode(ks, supported, FIBRE);
1089		ethtool_link_ksettings_add_link_mode(ks, advertising, FIBRE);
1090		ks->base.port = PORT_FIBRE;
1091		break;
1092	case I40E_MEDIA_TYPE_UNKNOWN:
1093	default:
1094		ks->base.port = PORT_OTHER;
1095		break;
1096	}
1097
 
 
 
1098	/* Set flow control settings */
1099	ethtool_link_ksettings_add_link_mode(ks, supported, Pause);
1100
1101	switch (hw->fc.requested_mode) {
1102	case I40E_FC_FULL:
1103		ethtool_link_ksettings_add_link_mode(ks, advertising, Pause);
1104		break;
1105	case I40E_FC_TX_PAUSE:
1106		ethtool_link_ksettings_add_link_mode(ks, advertising,
1107						     Asym_Pause);
1108		break;
1109	case I40E_FC_RX_PAUSE:
1110		ethtool_link_ksettings_add_link_mode(ks, advertising, Pause);
1111		ethtool_link_ksettings_add_link_mode(ks, advertising,
1112						     Asym_Pause);
1113		break;
1114	default:
1115		ethtool_link_ksettings_del_link_mode(ks, advertising, Pause);
1116		ethtool_link_ksettings_del_link_mode(ks, advertising,
1117						     Asym_Pause);
1118		break;
1119	}
1120
1121	return 0;
1122}
1123
1124/**
1125 * i40e_set_link_ksettings - Set Speed and Duplex
1126 * @netdev: network interface device structure
1127 * @ks: ethtool ksettings
1128 *
1129 * Set speed/duplex per media_types advertised/forced
1130 **/
1131static int i40e_set_link_ksettings(struct net_device *netdev,
1132				   const struct ethtool_link_ksettings *ks)
1133{
1134	struct i40e_netdev_priv *np = netdev_priv(netdev);
1135	struct i40e_aq_get_phy_abilities_resp abilities;
1136	struct ethtool_link_ksettings safe_ks;
1137	struct ethtool_link_ksettings copy_ks;
1138	struct i40e_aq_set_phy_config config;
1139	struct i40e_pf *pf = np->vsi->back;
1140	struct i40e_vsi *vsi = np->vsi;
1141	struct i40e_hw *hw = &pf->hw;
1142	bool autoneg_changed = false;
1143	i40e_status status = 0;
1144	int timeout = 50;
1145	int err = 0;
1146	u8 autoneg;
 
1147
1148	/* Changing port settings is not supported if this isn't the
1149	 * port's controlling PF
1150	 */
1151	if (hw->partition_id != 1) {
1152		i40e_partition_setting_complaint(pf);
1153		return -EOPNOTSUPP;
1154	}
 
1155	if (vsi != pf->vsi[pf->lan_vsi])
1156		return -EOPNOTSUPP;
 
1157	if (hw->phy.media_type != I40E_MEDIA_TYPE_BASET &&
1158	    hw->phy.media_type != I40E_MEDIA_TYPE_FIBER &&
1159	    hw->phy.media_type != I40E_MEDIA_TYPE_BACKPLANE &&
1160	    hw->phy.media_type != I40E_MEDIA_TYPE_DA &&
1161	    hw->phy.link_info.link_info & I40E_AQ_LINK_UP)
1162		return -EOPNOTSUPP;
 
1163	if (hw->device_id == I40E_DEV_ID_KX_B ||
1164	    hw->device_id == I40E_DEV_ID_KX_C ||
1165	    hw->device_id == I40E_DEV_ID_20G_KR2 ||
1166	    hw->device_id == I40E_DEV_ID_20G_KR2_A ||
1167	    hw->device_id == I40E_DEV_ID_25G_B ||
1168	    hw->device_id == I40E_DEV_ID_KX_X722) {
1169		netdev_info(netdev, "Changing settings is not supported on backplane.\n");
1170		return -EOPNOTSUPP;
1171	}
1172
1173	/* copy the ksettings to copy_ks to avoid modifying the origin */
1174	memcpy(&copy_ks, ks, sizeof(struct ethtool_link_ksettings));
1175
1176	/* save autoneg out of ksettings */
1177	autoneg = copy_ks.base.autoneg;
1178
1179	/* get our own copy of the bits to check against */
1180	memset(&safe_ks, 0, sizeof(struct ethtool_link_ksettings));
1181	safe_ks.base.cmd = copy_ks.base.cmd;
1182	safe_ks.base.link_mode_masks_nwords =
1183		copy_ks.base.link_mode_masks_nwords;
1184	i40e_get_link_ksettings(netdev, &safe_ks);
1185
1186	/* Get link modes supported by hardware and check against modes
1187	 * requested by the user.  Return an error if unsupported mode was set.
1188	 */
1189	if (!bitmap_subset(copy_ks.link_modes.advertising,
1190			   safe_ks.link_modes.supported,
1191			   __ETHTOOL_LINK_MODE_MASK_NBITS))
1192		return -EINVAL;
1193
1194	/* set autoneg back to what it currently is */
1195	copy_ks.base.autoneg = safe_ks.base.autoneg;
 
1196
1197	/* If copy_ks.base and safe_ks.base are not the same now, then they are
1198	 * trying to set something that we do not support.
 
1199	 */
1200	if (memcmp(&copy_ks.base, &safe_ks.base,
1201		   sizeof(struct ethtool_link_settings)))
1202		return -EOPNOTSUPP;
1203
1204	while (test_and_set_bit(__I40E_CONFIG_BUSY, pf->state)) {
1205		timeout--;
1206		if (!timeout)
1207			return -EBUSY;
1208		usleep_range(1000, 2000);
1209	}
1210
1211	/* Get the current phy config */
1212	status = i40e_aq_get_phy_capabilities(hw, false, false, &abilities,
1213					      NULL);
1214	if (status) {
1215		err = -EAGAIN;
1216		goto done;
1217	}
1218
1219	/* Copy abilities to config in case autoneg is not
1220	 * set below
1221	 */
1222	memset(&config, 0, sizeof(struct i40e_aq_set_phy_config));
1223	config.abilities = abilities.abilities;
1224
1225	/* Check autoneg */
1226	if (autoneg == AUTONEG_ENABLE) {
1227		/* If autoneg was not already enabled */
1228		if (!(hw->phy.link_info.an_info & I40E_AQ_AN_COMPLETED)) {
1229			/* If autoneg is not supported, return error */
1230			if (!ethtool_link_ksettings_test_link_mode(&safe_ks,
1231								   supported,
1232								   Autoneg)) {
1233				netdev_info(netdev, "Autoneg not supported on this phy\n");
1234				err = -EINVAL;
1235				goto done;
1236			}
1237			/* Autoneg is allowed to change */
1238			config.abilities = abilities.abilities |
1239					   I40E_AQ_PHY_ENABLE_AN;
1240			autoneg_changed = true;
1241		}
1242	} else {
1243		/* If autoneg is currently enabled */
1244		if (hw->phy.link_info.an_info & I40E_AQ_AN_COMPLETED) {
1245			/* If autoneg is supported 10GBASE_T is the only PHY
1246			 * that can disable it, so otherwise return error
1247			 */
1248			if (ethtool_link_ksettings_test_link_mode(&safe_ks,
1249								  supported,
1250								  Autoneg) &&
1251			    hw->phy.link_info.phy_type !=
1252			    I40E_PHY_TYPE_10GBASE_T) {
1253				netdev_info(netdev, "Autoneg cannot be disabled on this phy\n");
1254				err = -EINVAL;
1255				goto done;
1256			}
1257			/* Autoneg is allowed to change */
1258			config.abilities = abilities.abilities &
1259					   ~I40E_AQ_PHY_ENABLE_AN;
1260			autoneg_changed = true;
1261		}
1262	}
1263
1264	if (ethtool_link_ksettings_test_link_mode(ks, advertising,
1265						  100baseT_Full))
 
 
1266		config.link_speed |= I40E_LINK_SPEED_100MB;
1267	if (ethtool_link_ksettings_test_link_mode(ks, advertising,
1268						  1000baseT_Full) ||
1269	    ethtool_link_ksettings_test_link_mode(ks, advertising,
1270						  1000baseX_Full) ||
1271	    ethtool_link_ksettings_test_link_mode(ks, advertising,
1272						  1000baseKX_Full))
1273		config.link_speed |= I40E_LINK_SPEED_1GB;
1274	if (ethtool_link_ksettings_test_link_mode(ks, advertising,
1275						  10000baseT_Full) ||
1276	    ethtool_link_ksettings_test_link_mode(ks, advertising,
1277						  10000baseKX4_Full) ||
1278	    ethtool_link_ksettings_test_link_mode(ks, advertising,
1279						  10000baseKR_Full) ||
1280	    ethtool_link_ksettings_test_link_mode(ks, advertising,
1281						  10000baseCR_Full) ||
1282	    ethtool_link_ksettings_test_link_mode(ks, advertising,
1283						  10000baseSR_Full) ||
1284	    ethtool_link_ksettings_test_link_mode(ks, advertising,
1285						  10000baseLR_Full))
1286		config.link_speed |= I40E_LINK_SPEED_10GB;
1287	if (ethtool_link_ksettings_test_link_mode(ks, advertising,
1288						  2500baseT_Full))
1289		config.link_speed |= I40E_LINK_SPEED_2_5GB;
1290	if (ethtool_link_ksettings_test_link_mode(ks, advertising,
1291						  5000baseT_Full))
1292		config.link_speed |= I40E_LINK_SPEED_5GB;
1293	if (ethtool_link_ksettings_test_link_mode(ks, advertising,
1294						  20000baseKR2_Full))
1295		config.link_speed |= I40E_LINK_SPEED_20GB;
1296	if (ethtool_link_ksettings_test_link_mode(ks, advertising,
1297						  25000baseCR_Full) ||
1298	    ethtool_link_ksettings_test_link_mode(ks, advertising,
1299						  25000baseKR_Full) ||
1300	    ethtool_link_ksettings_test_link_mode(ks, advertising,
1301						  25000baseSR_Full))
1302		config.link_speed |= I40E_LINK_SPEED_25GB;
1303	if (ethtool_link_ksettings_test_link_mode(ks, advertising,
1304						  40000baseKR4_Full) ||
1305	    ethtool_link_ksettings_test_link_mode(ks, advertising,
1306						  40000baseCR4_Full) ||
1307	    ethtool_link_ksettings_test_link_mode(ks, advertising,
1308						  40000baseSR4_Full) ||
1309	    ethtool_link_ksettings_test_link_mode(ks, advertising,
1310						  40000baseLR4_Full))
1311		config.link_speed |= I40E_LINK_SPEED_40GB;
1312
1313	/* If speed didn't get set, set it to what it currently is.
1314	 * This is needed because if advertise is 0 (as it is when autoneg
1315	 * is disabled) then speed won't get set.
1316	 */
1317	if (!config.link_speed)
1318		config.link_speed = abilities.link_speed;
1319	if (autoneg_changed || abilities.link_speed != config.link_speed) {
 
1320		/* copy over the rest of the abilities */
1321		config.phy_type = abilities.phy_type;
1322		config.phy_type_ext = abilities.phy_type_ext;
1323		config.eee_capability = abilities.eee_capability;
1324		config.eeer = abilities.eeer_val;
1325		config.low_power_ctrl = abilities.d3_lpan;
1326		config.fec_config = abilities.fec_cfg_curr_mod_ext_info &
1327				    I40E_AQ_PHY_FEC_CONFIG_MASK;
1328
1329		/* save the requested speeds */
1330		hw->phy.link_info.requested_speeds = config.link_speed;
1331		/* set link and auto negotiation so changes take effect */
1332		config.abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
1333		/* If link is up put link down */
1334		if (hw->phy.link_info.link_info & I40E_AQ_LINK_UP) {
1335			/* Tell the OS link is going down, the link will go
1336			 * back up when fw says it is ready asynchronously
1337			 */
1338			i40e_print_link_message(vsi, false);
1339			netif_carrier_off(netdev);
1340			netif_tx_stop_all_queues(netdev);
1341		}
1342
1343		/* make the aq call */
1344		status = i40e_aq_set_phy_config(hw, &config, NULL);
1345		if (status) {
1346			netdev_info(netdev,
1347				    "Set phy config failed, err %s aq_err %s\n",
1348				    i40e_stat_str(hw, status),
1349				    i40e_aq_str(hw, hw->aq.asq_last_status));
1350			err = -EAGAIN;
1351			goto done;
1352		}
1353
1354		status = i40e_update_link_info(hw);
1355		if (status)
1356			netdev_dbg(netdev,
1357				   "Updating link info failed with err %s aq_err %s\n",
1358				   i40e_stat_str(hw, status),
1359				   i40e_aq_str(hw, hw->aq.asq_last_status));
1360
1361	} else {
1362		netdev_info(netdev, "Nothing changed, exiting without setting anything.\n");
1363	}
1364
1365done:
1366	clear_bit(__I40E_CONFIG_BUSY, pf->state);
1367
1368	return err;
1369}
1370
1371static int i40e_set_fec_cfg(struct net_device *netdev, u8 fec_cfg)
1372{
1373	struct i40e_netdev_priv *np = netdev_priv(netdev);
1374	struct i40e_aq_get_phy_abilities_resp abilities;
1375	struct i40e_pf *pf = np->vsi->back;
1376	struct i40e_hw *hw = &pf->hw;
1377	i40e_status status = 0;
1378	u32 flags = 0;
1379	int err = 0;
1380
1381	flags = READ_ONCE(pf->flags);
1382	i40e_set_fec_in_flags(fec_cfg, &flags);
1383
1384	/* Get the current phy config */
1385	memset(&abilities, 0, sizeof(abilities));
1386	status = i40e_aq_get_phy_capabilities(hw, false, false, &abilities,
1387					      NULL);
1388	if (status) {
1389		err = -EAGAIN;
1390		goto done;
1391	}
1392
1393	if (abilities.fec_cfg_curr_mod_ext_info != fec_cfg) {
1394		struct i40e_aq_set_phy_config config;
1395
1396		memset(&config, 0, sizeof(config));
1397		config.phy_type = abilities.phy_type;
1398		config.abilities = abilities.abilities;
1399		config.phy_type_ext = abilities.phy_type_ext;
1400		config.link_speed = abilities.link_speed;
1401		config.eee_capability = abilities.eee_capability;
1402		config.eeer = abilities.eeer_val;
1403		config.low_power_ctrl = abilities.d3_lpan;
1404		config.fec_config = fec_cfg & I40E_AQ_PHY_FEC_CONFIG_MASK;
1405		status = i40e_aq_set_phy_config(hw, &config, NULL);
1406		if (status) {
1407			netdev_info(netdev,
1408				    "Set phy config failed, err %s aq_err %s\n",
1409				    i40e_stat_str(hw, status),
1410				    i40e_aq_str(hw, hw->aq.asq_last_status));
1411			err = -EAGAIN;
1412			goto done;
1413		}
1414		pf->flags = flags;
1415		status = i40e_update_link_info(hw);
1416		if (status)
1417			/* debug level message only due to relation to the link
1418			 * itself rather than to the FEC settings
1419			 * (e.g. no physical connection etc.)
1420			 */
1421			netdev_dbg(netdev,
1422				   "Updating link info failed with err %s aq_err %s\n",
1423				   i40e_stat_str(hw, status),
1424				   i40e_aq_str(hw, hw->aq.asq_last_status));
1425	}
1426
1427done:
1428	return err;
1429}
1430
1431static int i40e_get_fec_param(struct net_device *netdev,
1432			      struct ethtool_fecparam *fecparam)
1433{
1434	struct i40e_netdev_priv *np = netdev_priv(netdev);
1435	struct i40e_aq_get_phy_abilities_resp abilities;
1436	struct i40e_pf *pf = np->vsi->back;
1437	struct i40e_hw *hw = &pf->hw;
1438	i40e_status status = 0;
1439	int err = 0;
1440
1441	/* Get the current phy config */
1442	memset(&abilities, 0, sizeof(abilities));
1443	status = i40e_aq_get_phy_capabilities(hw, false, false, &abilities,
1444					      NULL);
1445	if (status) {
1446		err = -EAGAIN;
1447		goto done;
1448	}
1449
1450	fecparam->fec = 0;
1451	if (abilities.fec_cfg_curr_mod_ext_info & I40E_AQ_SET_FEC_AUTO)
1452		fecparam->fec |= ETHTOOL_FEC_AUTO;
1453	if ((abilities.fec_cfg_curr_mod_ext_info &
1454	     I40E_AQ_SET_FEC_REQUEST_RS) ||
1455	    (abilities.fec_cfg_curr_mod_ext_info &
1456	     I40E_AQ_SET_FEC_ABILITY_RS))
1457		fecparam->fec |= ETHTOOL_FEC_RS;
1458	if ((abilities.fec_cfg_curr_mod_ext_info &
1459	     I40E_AQ_SET_FEC_REQUEST_KR) ||
1460	    (abilities.fec_cfg_curr_mod_ext_info & I40E_AQ_SET_FEC_ABILITY_KR))
1461		fecparam->fec |= ETHTOOL_FEC_BASER;
1462	if (abilities.fec_cfg_curr_mod_ext_info == 0)
1463		fecparam->fec |= ETHTOOL_FEC_OFF;
1464
1465	if (hw->phy.link_info.fec_info & I40E_AQ_CONFIG_FEC_KR_ENA)
1466		fecparam->active_fec = ETHTOOL_FEC_BASER;
1467	else if (hw->phy.link_info.fec_info & I40E_AQ_CONFIG_FEC_RS_ENA)
1468		fecparam->active_fec = ETHTOOL_FEC_RS;
1469	else
1470		fecparam->active_fec = ETHTOOL_FEC_OFF;
1471done:
1472	return err;
1473}
1474
1475static int i40e_set_fec_param(struct net_device *netdev,
1476			      struct ethtool_fecparam *fecparam)
1477{
1478	struct i40e_netdev_priv *np = netdev_priv(netdev);
1479	struct i40e_pf *pf = np->vsi->back;
1480	struct i40e_hw *hw = &pf->hw;
1481	u8 fec_cfg = 0;
1482	int err = 0;
1483
1484	if (hw->device_id != I40E_DEV_ID_25G_SFP28 &&
1485	    hw->device_id != I40E_DEV_ID_25G_B) {
1486		err = -EPERM;
1487		goto done;
1488	}
1489
1490	switch (fecparam->fec) {
1491	case ETHTOOL_FEC_AUTO:
1492		fec_cfg = I40E_AQ_SET_FEC_AUTO;
1493		break;
1494	case ETHTOOL_FEC_RS:
1495		fec_cfg = (I40E_AQ_SET_FEC_REQUEST_RS |
1496			     I40E_AQ_SET_FEC_ABILITY_RS);
1497		break;
1498	case ETHTOOL_FEC_BASER:
1499		fec_cfg = (I40E_AQ_SET_FEC_REQUEST_KR |
1500			     I40E_AQ_SET_FEC_ABILITY_KR);
1501		break;
1502	case ETHTOOL_FEC_OFF:
1503	case ETHTOOL_FEC_NONE:
1504		fec_cfg = 0;
1505		break;
1506	default:
1507		dev_warn(&pf->pdev->dev, "Unsupported FEC mode: %d",
1508			 fecparam->fec);
1509		err = -EINVAL;
1510		goto done;
1511	}
1512
1513	err = i40e_set_fec_cfg(netdev, fec_cfg);
1514
1515done:
1516	return err;
1517}
1518
1519static int i40e_nway_reset(struct net_device *netdev)
1520{
1521	/* restart autonegotiation */
1522	struct i40e_netdev_priv *np = netdev_priv(netdev);
1523	struct i40e_pf *pf = np->vsi->back;
1524	struct i40e_hw *hw = &pf->hw;
1525	bool link_up = hw->phy.link_info.link_info & I40E_AQ_LINK_UP;
1526	i40e_status ret = 0;
1527
1528	ret = i40e_aq_set_link_restart_an(hw, link_up, NULL);
1529	if (ret) {
1530		netdev_info(netdev, "link restart failed, err %s aq_err %s\n",
1531			    i40e_stat_str(hw, ret),
1532			    i40e_aq_str(hw, hw->aq.asq_last_status));
1533		return -EIO;
1534	}
1535
1536	return 0;
1537}
1538
1539/**
1540 * i40e_get_pauseparam -  Get Flow Control status
1541 * @netdev: netdevice structure
1542 * @pause: buffer to return pause parameters
1543 *
1544 * Return tx/rx-pause status
1545 **/
1546static void i40e_get_pauseparam(struct net_device *netdev,
1547				struct ethtool_pauseparam *pause)
1548{
1549	struct i40e_netdev_priv *np = netdev_priv(netdev);
1550	struct i40e_pf *pf = np->vsi->back;
1551	struct i40e_hw *hw = &pf->hw;
1552	struct i40e_link_status *hw_link_info = &hw->phy.link_info;
1553	struct i40e_dcbx_config *dcbx_cfg = &hw->local_dcbx_config;
1554
1555	pause->autoneg =
1556		((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ?
1557		  AUTONEG_ENABLE : AUTONEG_DISABLE);
1558
1559	/* PFC enabled so report LFC as off */
1560	if (dcbx_cfg->pfc.pfcenable) {
1561		pause->rx_pause = 0;
1562		pause->tx_pause = 0;
1563		return;
1564	}
1565
1566	if (hw->fc.current_mode == I40E_FC_RX_PAUSE) {
1567		pause->rx_pause = 1;
1568	} else if (hw->fc.current_mode == I40E_FC_TX_PAUSE) {
1569		pause->tx_pause = 1;
1570	} else if (hw->fc.current_mode == I40E_FC_FULL) {
1571		pause->rx_pause = 1;
1572		pause->tx_pause = 1;
1573	}
1574}
1575
1576/**
1577 * i40e_set_pauseparam - Set Flow Control parameter
1578 * @netdev: network interface device structure
1579 * @pause: return tx/rx flow control status
1580 **/
1581static int i40e_set_pauseparam(struct net_device *netdev,
1582			       struct ethtool_pauseparam *pause)
1583{
1584	struct i40e_netdev_priv *np = netdev_priv(netdev);
1585	struct i40e_pf *pf = np->vsi->back;
1586	struct i40e_vsi *vsi = np->vsi;
1587	struct i40e_hw *hw = &pf->hw;
1588	struct i40e_link_status *hw_link_info = &hw->phy.link_info;
1589	struct i40e_dcbx_config *dcbx_cfg = &hw->local_dcbx_config;
1590	bool link_up = hw_link_info->link_info & I40E_AQ_LINK_UP;
1591	i40e_status status;
1592	u8 aq_failures;
1593	int err = 0;
1594	u32 is_an;
1595
1596	/* Changing the port's flow control is not supported if this isn't the
1597	 * port's controlling PF
1598	 */
1599	if (hw->partition_id != 1) {
1600		i40e_partition_setting_complaint(pf);
1601		return -EOPNOTSUPP;
1602	}
1603
1604	if (vsi != pf->vsi[pf->lan_vsi])
1605		return -EOPNOTSUPP;
1606
1607	is_an = hw_link_info->an_info & I40E_AQ_AN_COMPLETED;
1608	if (pause->autoneg != is_an) {
1609		netdev_info(netdev, "To change autoneg please use: ethtool -s <dev> autoneg <on|off>\n");
1610		return -EOPNOTSUPP;
1611	}
1612
1613	/* If we have link and don't have autoneg */
1614	if (!test_bit(__I40E_DOWN, pf->state) && !is_an) {
 
1615		/* Send message that it might not necessarily work*/
1616		netdev_info(netdev, "Autoneg did not complete so changing settings may not result in an actual change.\n");
1617	}
1618
1619	if (dcbx_cfg->pfc.pfcenable) {
1620		netdev_info(netdev,
1621			    "Priority flow control enabled. Cannot set link flow control.\n");
1622		return -EOPNOTSUPP;
1623	}
1624
1625	if (pause->rx_pause && pause->tx_pause)
1626		hw->fc.requested_mode = I40E_FC_FULL;
1627	else if (pause->rx_pause && !pause->tx_pause)
1628		hw->fc.requested_mode = I40E_FC_RX_PAUSE;
1629	else if (!pause->rx_pause && pause->tx_pause)
1630		hw->fc.requested_mode = I40E_FC_TX_PAUSE;
1631	else if (!pause->rx_pause && !pause->tx_pause)
1632		hw->fc.requested_mode = I40E_FC_NONE;
1633	else
1634		return -EINVAL;
1635
1636	/* Tell the OS link is going down, the link will go back up when fw
1637	 * says it is ready asynchronously
1638	 */
1639	i40e_print_link_message(vsi, false);
1640	netif_carrier_off(netdev);
1641	netif_tx_stop_all_queues(netdev);
1642
1643	/* Set the fc mode and only restart an if link is up*/
1644	status = i40e_set_fc(hw, &aq_failures, link_up);
1645
1646	if (aq_failures & I40E_SET_FC_AQ_FAIL_GET) {
1647		netdev_info(netdev, "Set fc failed on the get_phy_capabilities call with err %s aq_err %s\n",
1648			    i40e_stat_str(hw, status),
1649			    i40e_aq_str(hw, hw->aq.asq_last_status));
1650		err = -EAGAIN;
1651	}
1652	if (aq_failures & I40E_SET_FC_AQ_FAIL_SET) {
1653		netdev_info(netdev, "Set fc failed on the set_phy_config call with err %s aq_err %s\n",
1654			    i40e_stat_str(hw, status),
1655			    i40e_aq_str(hw, hw->aq.asq_last_status));
1656		err = -EAGAIN;
1657	}
1658	if (aq_failures & I40E_SET_FC_AQ_FAIL_UPDATE) {
1659		netdev_info(netdev, "Set fc failed on the get_link_info call with err %s aq_err %s\n",
1660			    i40e_stat_str(hw, status),
1661			    i40e_aq_str(hw, hw->aq.asq_last_status));
1662		err = -EAGAIN;
1663	}
1664
1665	if (!test_bit(__I40E_DOWN, pf->state) && is_an) {
1666		/* Give it a little more time to try to come back */
1667		msleep(75);
1668		if (!test_bit(__I40E_DOWN, pf->state))
1669			return i40e_nway_reset(netdev);
1670	}
1671
1672	return err;
1673}
1674
1675static u32 i40e_get_msglevel(struct net_device *netdev)
1676{
1677	struct i40e_netdev_priv *np = netdev_priv(netdev);
1678	struct i40e_pf *pf = np->vsi->back;
1679	u32 debug_mask = pf->hw.debug_mask;
1680
1681	if (debug_mask)
1682		netdev_info(netdev, "i40e debug_mask: 0x%08X\n", debug_mask);
1683
1684	return pf->msg_enable;
1685}
1686
1687static void i40e_set_msglevel(struct net_device *netdev, u32 data)
1688{
1689	struct i40e_netdev_priv *np = netdev_priv(netdev);
1690	struct i40e_pf *pf = np->vsi->back;
1691
1692	if (I40E_DEBUG_USER & data)
1693		pf->hw.debug_mask = data;
1694	else
1695		pf->msg_enable = data;
1696}
1697
1698static int i40e_get_regs_len(struct net_device *netdev)
1699{
1700	int reg_count = 0;
1701	int i;
1702
1703	for (i = 0; i40e_reg_list[i].offset != 0; i++)
1704		reg_count += i40e_reg_list[i].elements;
1705
1706	return reg_count * sizeof(u32);
1707}
1708
1709static void i40e_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
1710			  void *p)
1711{
1712	struct i40e_netdev_priv *np = netdev_priv(netdev);
1713	struct i40e_pf *pf = np->vsi->back;
1714	struct i40e_hw *hw = &pf->hw;
1715	u32 *reg_buf = p;
1716	unsigned int i, j, ri;
1717	u32 reg;
1718
1719	/* Tell ethtool which driver-version-specific regs output we have.
1720	 *
1721	 * At some point, if we have ethtool doing special formatting of
1722	 * this data, it will rely on this version number to know how to
1723	 * interpret things.  Hence, this needs to be updated if/when the
1724	 * diags register table is changed.
1725	 */
1726	regs->version = 1;
1727
1728	/* loop through the diags reg table for what to print */
1729	ri = 0;
1730	for (i = 0; i40e_reg_list[i].offset != 0; i++) {
1731		for (j = 0; j < i40e_reg_list[i].elements; j++) {
1732			reg = i40e_reg_list[i].offset
1733				+ (j * i40e_reg_list[i].stride);
1734			reg_buf[ri++] = rd32(hw, reg);
1735		}
1736	}
1737
1738}
1739
1740static int i40e_get_eeprom(struct net_device *netdev,
1741			   struct ethtool_eeprom *eeprom, u8 *bytes)
1742{
1743	struct i40e_netdev_priv *np = netdev_priv(netdev);
1744	struct i40e_hw *hw = &np->vsi->back->hw;
1745	struct i40e_pf *pf = np->vsi->back;
1746	int ret_val = 0, len, offset;
1747	u8 *eeprom_buff;
1748	u16 i, sectors;
1749	bool last;
1750	u32 magic;
1751
1752#define I40E_NVM_SECTOR_SIZE  4096
1753	if (eeprom->len == 0)
1754		return -EINVAL;
1755
1756	/* check for NVMUpdate access method */
1757	magic = hw->vendor_id | (hw->device_id << 16);
1758	if (eeprom->magic && eeprom->magic != magic) {
1759		struct i40e_nvm_access *cmd = (struct i40e_nvm_access *)eeprom;
1760		int errno = 0;
1761
1762		/* make sure it is the right magic for NVMUpdate */
1763		if ((eeprom->magic >> 16) != hw->device_id)
1764			errno = -EINVAL;
1765		else if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) ||
1766			 test_bit(__I40E_RESET_INTR_RECEIVED, pf->state))
1767			errno = -EBUSY;
1768		else
1769			ret_val = i40e_nvmupd_command(hw, cmd, bytes, &errno);
1770
1771		if ((errno || ret_val) && (hw->debug_mask & I40E_DEBUG_NVM))
1772			dev_info(&pf->pdev->dev,
1773				 "NVMUpdate read failed err=%d status=0x%x errno=%d module=%d offset=0x%x size=%d\n",
1774				 ret_val, hw->aq.asq_last_status, errno,
1775				 (u8)(cmd->config & I40E_NVM_MOD_PNT_MASK),
1776				 cmd->offset, cmd->data_size);
1777
1778		return errno;
1779	}
1780
1781	/* normal ethtool get_eeprom support */
1782	eeprom->magic = hw->vendor_id | (hw->device_id << 16);
1783
1784	eeprom_buff = kzalloc(eeprom->len, GFP_KERNEL);
1785	if (!eeprom_buff)
1786		return -ENOMEM;
1787
1788	ret_val = i40e_acquire_nvm(hw, I40E_RESOURCE_READ);
1789	if (ret_val) {
1790		dev_info(&pf->pdev->dev,
1791			 "Failed Acquiring NVM resource for read err=%d status=0x%x\n",
1792			 ret_val, hw->aq.asq_last_status);
1793		goto free_buff;
1794	}
1795
1796	sectors = eeprom->len / I40E_NVM_SECTOR_SIZE;
1797	sectors += (eeprom->len % I40E_NVM_SECTOR_SIZE) ? 1 : 0;
1798	len = I40E_NVM_SECTOR_SIZE;
1799	last = false;
1800	for (i = 0; i < sectors; i++) {
1801		if (i == (sectors - 1)) {
1802			len = eeprom->len - (I40E_NVM_SECTOR_SIZE * i);
1803			last = true;
1804		}
1805		offset = eeprom->offset + (I40E_NVM_SECTOR_SIZE * i),
1806		ret_val = i40e_aq_read_nvm(hw, 0x0, offset, len,
1807				(u8 *)eeprom_buff + (I40E_NVM_SECTOR_SIZE * i),
1808				last, NULL);
1809		if (ret_val && hw->aq.asq_last_status == I40E_AQ_RC_EPERM) {
1810			dev_info(&pf->pdev->dev,
1811				 "read NVM failed, invalid offset 0x%x\n",
1812				 offset);
1813			break;
1814		} else if (ret_val &&
1815			   hw->aq.asq_last_status == I40E_AQ_RC_EACCES) {
1816			dev_info(&pf->pdev->dev,
1817				 "read NVM failed, access, offset 0x%x\n",
1818				 offset);
1819			break;
1820		} else if (ret_val) {
1821			dev_info(&pf->pdev->dev,
1822				 "read NVM failed offset %d err=%d status=0x%x\n",
1823				 offset, ret_val, hw->aq.asq_last_status);
1824			break;
1825		}
1826	}
1827
1828	i40e_release_nvm(hw);
1829	memcpy(bytes, (u8 *)eeprom_buff, eeprom->len);
1830free_buff:
1831	kfree(eeprom_buff);
1832	return ret_val;
1833}
1834
1835static int i40e_get_eeprom_len(struct net_device *netdev)
1836{
1837	struct i40e_netdev_priv *np = netdev_priv(netdev);
1838	struct i40e_hw *hw = &np->vsi->back->hw;
1839	u32 val;
1840
1841#define X722_EEPROM_SCOPE_LIMIT 0x5B9FFF
1842	if (hw->mac.type == I40E_MAC_X722) {
1843		val = X722_EEPROM_SCOPE_LIMIT + 1;
1844		return val;
1845	}
1846	val = (rd32(hw, I40E_GLPCI_LBARCTRL)
1847		& I40E_GLPCI_LBARCTRL_FL_SIZE_MASK)
1848		>> I40E_GLPCI_LBARCTRL_FL_SIZE_SHIFT;
1849	/* register returns value in power of 2, 64Kbyte chunks. */
1850	val = (64 * 1024) * BIT(val);
1851	return val;
1852}
1853
1854static int i40e_set_eeprom(struct net_device *netdev,
1855			   struct ethtool_eeprom *eeprom, u8 *bytes)
1856{
1857	struct i40e_netdev_priv *np = netdev_priv(netdev);
1858	struct i40e_hw *hw = &np->vsi->back->hw;
1859	struct i40e_pf *pf = np->vsi->back;
1860	struct i40e_nvm_access *cmd = (struct i40e_nvm_access *)eeprom;
1861	int ret_val = 0;
1862	int errno = 0;
1863	u32 magic;
1864
1865	/* normal ethtool set_eeprom is not supported */
1866	magic = hw->vendor_id | (hw->device_id << 16);
1867	if (eeprom->magic == magic)
1868		errno = -EOPNOTSUPP;
1869	/* check for NVMUpdate access method */
1870	else if (!eeprom->magic || (eeprom->magic >> 16) != hw->device_id)
1871		errno = -EINVAL;
1872	else if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) ||
1873		 test_bit(__I40E_RESET_INTR_RECEIVED, pf->state))
1874		errno = -EBUSY;
1875	else
1876		ret_val = i40e_nvmupd_command(hw, cmd, bytes, &errno);
1877
1878	if ((errno || ret_val) && (hw->debug_mask & I40E_DEBUG_NVM))
1879		dev_info(&pf->pdev->dev,
1880			 "NVMUpdate write failed err=%d status=0x%x errno=%d module=%d offset=0x%x size=%d\n",
1881			 ret_val, hw->aq.asq_last_status, errno,
1882			 (u8)(cmd->config & I40E_NVM_MOD_PNT_MASK),
1883			 cmd->offset, cmd->data_size);
1884
1885	return errno;
1886}
1887
1888static void i40e_get_drvinfo(struct net_device *netdev,
1889			     struct ethtool_drvinfo *drvinfo)
1890{
1891	struct i40e_netdev_priv *np = netdev_priv(netdev);
1892	struct i40e_vsi *vsi = np->vsi;
1893	struct i40e_pf *pf = vsi->back;
1894
1895	strlcpy(drvinfo->driver, i40e_driver_name, sizeof(drvinfo->driver));
1896	strlcpy(drvinfo->version, i40e_driver_version_str,
1897		sizeof(drvinfo->version));
1898	strlcpy(drvinfo->fw_version, i40e_nvm_version_str(&pf->hw),
1899		sizeof(drvinfo->fw_version));
1900	strlcpy(drvinfo->bus_info, pci_name(pf->pdev),
1901		sizeof(drvinfo->bus_info));
1902	drvinfo->n_priv_flags = I40E_PRIV_FLAGS_STR_LEN;
1903	if (pf->hw.pf_id == 0)
1904		drvinfo->n_priv_flags += I40E_GL_PRIV_FLAGS_STR_LEN;
1905}
1906
1907static void i40e_get_ringparam(struct net_device *netdev,
1908			       struct ethtool_ringparam *ring)
1909{
1910	struct i40e_netdev_priv *np = netdev_priv(netdev);
1911	struct i40e_pf *pf = np->vsi->back;
1912	struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi];
1913
1914	ring->rx_max_pending = I40E_MAX_NUM_DESCRIPTORS;
1915	ring->tx_max_pending = I40E_MAX_NUM_DESCRIPTORS;
1916	ring->rx_mini_max_pending = 0;
1917	ring->rx_jumbo_max_pending = 0;
1918	ring->rx_pending = vsi->rx_rings[0]->count;
1919	ring->tx_pending = vsi->tx_rings[0]->count;
1920	ring->rx_mini_pending = 0;
1921	ring->rx_jumbo_pending = 0;
1922}
1923
1924static bool i40e_active_tx_ring_index(struct i40e_vsi *vsi, u16 index)
1925{
1926	if (i40e_enabled_xdp_vsi(vsi)) {
1927		return index < vsi->num_queue_pairs ||
1928			(index >= vsi->alloc_queue_pairs &&
1929			 index < vsi->alloc_queue_pairs + vsi->num_queue_pairs);
1930	}
1931
1932	return index < vsi->num_queue_pairs;
1933}
1934
1935static int i40e_set_ringparam(struct net_device *netdev,
1936			      struct ethtool_ringparam *ring)
1937{
1938	struct i40e_ring *tx_rings = NULL, *rx_rings = NULL;
1939	struct i40e_netdev_priv *np = netdev_priv(netdev);
1940	struct i40e_hw *hw = &np->vsi->back->hw;
1941	struct i40e_vsi *vsi = np->vsi;
1942	struct i40e_pf *pf = vsi->back;
1943	u32 new_rx_count, new_tx_count;
1944	u16 tx_alloc_queue_pairs;
1945	int timeout = 50;
1946	int i, err = 0;
1947
1948	if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
1949		return -EINVAL;
1950
1951	if (ring->tx_pending > I40E_MAX_NUM_DESCRIPTORS ||
1952	    ring->tx_pending < I40E_MIN_NUM_DESCRIPTORS ||
1953	    ring->rx_pending > I40E_MAX_NUM_DESCRIPTORS ||
1954	    ring->rx_pending < I40E_MIN_NUM_DESCRIPTORS) {
1955		netdev_info(netdev,
1956			    "Descriptors requested (Tx: %d / Rx: %d) out of range [%d-%d]\n",
1957			    ring->tx_pending, ring->rx_pending,
1958			    I40E_MIN_NUM_DESCRIPTORS, I40E_MAX_NUM_DESCRIPTORS);
1959		return -EINVAL;
1960	}
1961
1962	new_tx_count = ALIGN(ring->tx_pending, I40E_REQ_DESCRIPTOR_MULTIPLE);
1963	new_rx_count = ALIGN(ring->rx_pending, I40E_REQ_DESCRIPTOR_MULTIPLE);
1964
1965	/* if nothing to do return success */
1966	if ((new_tx_count == vsi->tx_rings[0]->count) &&
1967	    (new_rx_count == vsi->rx_rings[0]->count))
1968		return 0;
1969
1970	/* If there is a AF_XDP UMEM attached to any of Rx rings,
1971	 * disallow changing the number of descriptors -- regardless
1972	 * if the netdev is running or not.
1973	 */
1974	if (i40e_xsk_any_rx_ring_enabled(vsi))
1975		return -EBUSY;
1976
1977	while (test_and_set_bit(__I40E_CONFIG_BUSY, pf->state)) {
1978		timeout--;
1979		if (!timeout)
1980			return -EBUSY;
1981		usleep_range(1000, 2000);
1982	}
1983
1984	if (!netif_running(vsi->netdev)) {
1985		/* simple case - set for the next time the netdev is started */
1986		for (i = 0; i < vsi->num_queue_pairs; i++) {
1987			vsi->tx_rings[i]->count = new_tx_count;
1988			vsi->rx_rings[i]->count = new_rx_count;
1989			if (i40e_enabled_xdp_vsi(vsi))
1990				vsi->xdp_rings[i]->count = new_tx_count;
1991		}
1992		vsi->num_tx_desc = new_tx_count;
1993		vsi->num_rx_desc = new_rx_count;
1994		goto done;
1995	}
1996
1997	/* We can't just free everything and then setup again,
1998	 * because the ISRs in MSI-X mode get passed pointers
1999	 * to the Tx and Rx ring structs.
2000	 */
2001
2002	/* alloc updated Tx and XDP Tx resources */
2003	tx_alloc_queue_pairs = vsi->alloc_queue_pairs *
2004			       (i40e_enabled_xdp_vsi(vsi) ? 2 : 1);
2005	if (new_tx_count != vsi->tx_rings[0]->count) {
2006		netdev_info(netdev,
2007			    "Changing Tx descriptor count from %d to %d.\n",
2008			    vsi->tx_rings[0]->count, new_tx_count);
2009		tx_rings = kcalloc(tx_alloc_queue_pairs,
2010				   sizeof(struct i40e_ring), GFP_KERNEL);
2011		if (!tx_rings) {
2012			err = -ENOMEM;
2013			goto done;
2014		}
2015
2016		for (i = 0; i < tx_alloc_queue_pairs; i++) {
2017			if (!i40e_active_tx_ring_index(vsi, i))
2018				continue;
2019
2020			tx_rings[i] = *vsi->tx_rings[i];
2021			tx_rings[i].count = new_tx_count;
2022			/* the desc and bi pointers will be reallocated in the
2023			 * setup call
2024			 */
2025			tx_rings[i].desc = NULL;
2026			tx_rings[i].rx_bi = NULL;
2027			err = i40e_setup_tx_descriptors(&tx_rings[i]);
2028			if (err) {
2029				while (i) {
2030					i--;
2031					if (!i40e_active_tx_ring_index(vsi, i))
2032						continue;
2033					i40e_free_tx_resources(&tx_rings[i]);
2034				}
2035				kfree(tx_rings);
2036				tx_rings = NULL;
2037
2038				goto done;
2039			}
2040		}
2041	}
2042
2043	/* alloc updated Rx resources */
2044	if (new_rx_count != vsi->rx_rings[0]->count) {
2045		netdev_info(netdev,
2046			    "Changing Rx descriptor count from %d to %d\n",
2047			    vsi->rx_rings[0]->count, new_rx_count);
2048		rx_rings = kcalloc(vsi->alloc_queue_pairs,
2049				   sizeof(struct i40e_ring), GFP_KERNEL);
2050		if (!rx_rings) {
2051			err = -ENOMEM;
2052			goto free_tx;
2053		}
2054
2055		for (i = 0; i < vsi->num_queue_pairs; i++) {
2056			u16 unused;
2057
2058			/* clone ring and setup updated count */
2059			rx_rings[i] = *vsi->rx_rings[i];
2060			rx_rings[i].count = new_rx_count;
2061			/* the desc and bi pointers will be reallocated in the
2062			 * setup call
2063			 */
2064			rx_rings[i].desc = NULL;
2065			rx_rings[i].rx_bi = NULL;
2066			/* Clear cloned XDP RX-queue info before setup call */
2067			memset(&rx_rings[i].xdp_rxq, 0, sizeof(rx_rings[i].xdp_rxq));
2068			/* this is to allow wr32 to have something to write to
2069			 * during early allocation of Rx buffers
2070			 */
2071			rx_rings[i].tail = hw->hw_addr + I40E_PRTGEN_STATUS;
2072			err = i40e_setup_rx_descriptors(&rx_rings[i]);
2073			if (err)
2074				goto rx_unwind;
2075
2076			/* now allocate the Rx buffers to make sure the OS
2077			 * has enough memory, any failure here means abort
2078			 */
2079			unused = I40E_DESC_UNUSED(&rx_rings[i]);
2080			err = i40e_alloc_rx_buffers(&rx_rings[i], unused);
2081rx_unwind:
2082			if (err) {
2083				do {
 
2084					i40e_free_rx_resources(&rx_rings[i]);
2085				} while (i--);
2086				kfree(rx_rings);
2087				rx_rings = NULL;
2088
2089				goto free_tx;
2090			}
2091		}
2092	}
2093
2094	/* Bring interface down, copy in the new ring info,
2095	 * then restore the interface
2096	 */
2097	i40e_down(vsi);
2098
2099	if (tx_rings) {
2100		for (i = 0; i < tx_alloc_queue_pairs; i++) {
2101			if (i40e_active_tx_ring_index(vsi, i)) {
2102				i40e_free_tx_resources(vsi->tx_rings[i]);
2103				*vsi->tx_rings[i] = tx_rings[i];
2104			}
2105		}
2106		kfree(tx_rings);
2107		tx_rings = NULL;
2108	}
2109
2110	if (rx_rings) {
2111		for (i = 0; i < vsi->num_queue_pairs; i++) {
2112			i40e_free_rx_resources(vsi->rx_rings[i]);
2113			/* get the real tail offset */
2114			rx_rings[i].tail = vsi->rx_rings[i]->tail;
2115			/* this is to fake out the allocation routine
2116			 * into thinking it has to realloc everything
2117			 * but the recycling logic will let us re-use
2118			 * the buffers allocated above
2119			 */
2120			rx_rings[i].next_to_use = 0;
2121			rx_rings[i].next_to_clean = 0;
2122			rx_rings[i].next_to_alloc = 0;
2123			/* do a struct copy */
2124			*vsi->rx_rings[i] = rx_rings[i];
2125		}
2126		kfree(rx_rings);
2127		rx_rings = NULL;
2128	}
2129
2130	vsi->num_tx_desc = new_tx_count;
2131	vsi->num_rx_desc = new_rx_count;
2132	i40e_up(vsi);
2133
2134free_tx:
2135	/* error cleanup if the Rx allocations failed after getting Tx */
2136	if (tx_rings) {
2137		for (i = 0; i < tx_alloc_queue_pairs; i++) {
2138			if (i40e_active_tx_ring_index(vsi, i))
2139				i40e_free_tx_resources(vsi->tx_rings[i]);
2140		}
2141		kfree(tx_rings);
2142		tx_rings = NULL;
2143	}
2144
2145done:
2146	clear_bit(__I40E_CONFIG_BUSY, pf->state);
2147
2148	return err;
2149}
2150
2151/**
2152 * i40e_get_stats_count - return the stats count for a device
2153 * @netdev: the netdev to return the count for
2154 *
2155 * Returns the total number of statistics for this netdev. Note that even
2156 * though this is a function, it is required that the count for a specific
2157 * netdev must never change. Basing the count on static values such as the
2158 * maximum number of queues or the device type is ok. However, the API for
2159 * obtaining stats is *not* safe against changes based on non-static
2160 * values such as the *current* number of queues, or runtime flags.
2161 *
2162 * If a statistic is not always enabled, return it as part of the count
2163 * anyways, always return its string, and report its value as zero.
2164 **/
2165static int i40e_get_stats_count(struct net_device *netdev)
2166{
2167	struct i40e_netdev_priv *np = netdev_priv(netdev);
2168	struct i40e_vsi *vsi = np->vsi;
2169	struct i40e_pf *pf = vsi->back;
2170	int stats_len;
2171
2172	if (vsi == pf->vsi[pf->lan_vsi] && pf->hw.partition_id == 1)
2173		stats_len = I40E_PF_STATS_LEN;
2174	else
2175		stats_len = I40E_VSI_STATS_LEN;
2176
2177	/* The number of stats reported for a given net_device must remain
2178	 * constant throughout the life of that device.
2179	 *
2180	 * This is because the API for obtaining the size, strings, and stats
2181	 * is spread out over three separate ethtool ioctls. There is no safe
2182	 * way to lock the number of stats across these calls, so we must
2183	 * assume that they will never change.
2184	 *
2185	 * Due to this, we report the maximum number of queues, even if not
2186	 * every queue is currently configured. Since we always allocate
2187	 * queues in pairs, we'll just use netdev->num_tx_queues * 2. This
2188	 * works because the num_tx_queues is set at device creation and never
2189	 * changes.
2190	 */
2191	stats_len += I40E_QUEUE_STATS_LEN * 2 * netdev->num_tx_queues;
2192
2193	return stats_len;
2194}
2195
2196static int i40e_get_sset_count(struct net_device *netdev, int sset)
2197{
2198	struct i40e_netdev_priv *np = netdev_priv(netdev);
2199	struct i40e_vsi *vsi = np->vsi;
2200	struct i40e_pf *pf = vsi->back;
2201
2202	switch (sset) {
2203	case ETH_SS_TEST:
2204		return I40E_TEST_LEN;
2205	case ETH_SS_STATS:
2206		return i40e_get_stats_count(netdev);
 
 
 
 
 
 
 
 
 
2207	case ETH_SS_PRIV_FLAGS:
2208		return I40E_PRIV_FLAGS_STR_LEN +
2209			(pf->hw.pf_id == 0 ? I40E_GL_PRIV_FLAGS_STR_LEN : 0);
2210	default:
2211		return -EOPNOTSUPP;
2212	}
2213}
2214
2215/**
2216 * i40e_get_pfc_stats - copy HW PFC statistics to formatted structure
2217 * @pf: the PF device structure
2218 * @i: the priority value to copy
2219 *
2220 * The PFC stats are found as arrays in pf->stats, which is not easy to pass
2221 * into i40e_add_ethtool_stats. Produce a formatted i40e_pfc_stats structure
2222 * of the PFC stats for the given priority.
2223 **/
2224static inline struct i40e_pfc_stats
2225i40e_get_pfc_stats(struct i40e_pf *pf, unsigned int i)
2226{
2227#define I40E_GET_PFC_STAT(stat, priority) \
2228	.stat = pf->stats.stat[priority]
2229
2230	struct i40e_pfc_stats pfc = {
2231		I40E_GET_PFC_STAT(priority_xon_rx, i),
2232		I40E_GET_PFC_STAT(priority_xoff_rx, i),
2233		I40E_GET_PFC_STAT(priority_xon_tx, i),
2234		I40E_GET_PFC_STAT(priority_xoff_tx, i),
2235		I40E_GET_PFC_STAT(priority_xon_2_xoff, i),
2236	};
2237	return pfc;
2238}
2239
2240/**
2241 * i40e_get_ethtool_stats - copy stat values into supplied buffer
2242 * @netdev: the netdev to collect stats for
2243 * @stats: ethtool stats command structure
2244 * @data: ethtool supplied buffer
2245 *
2246 * Copy the stats values for this netdev into the buffer. Expects data to be
2247 * pre-allocated to the size returned by i40e_get_stats_count.. Note that all
2248 * statistics must be copied in a static order, and the count must not change
2249 * for a given netdev. See i40e_get_stats_count for more details.
2250 *
2251 * If a statistic is not currently valid (such as a disabled queue), this
2252 * function reports its value as zero.
2253 **/
2254static void i40e_get_ethtool_stats(struct net_device *netdev,
2255				   struct ethtool_stats *stats, u64 *data)
2256{
2257	struct i40e_netdev_priv *np = netdev_priv(netdev);
 
2258	struct i40e_vsi *vsi = np->vsi;
2259	struct i40e_pf *pf = vsi->back;
2260	struct i40e_veb *veb = NULL;
2261	unsigned int i;
2262	bool veb_stats;
2263	u64 *p = data;
 
2264
2265	i40e_update_stats(vsi);
2266
2267	i40e_add_ethtool_stats(&data, i40e_get_vsi_stats_struct(vsi),
2268			       i40e_gstrings_net_stats);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2269
2270	i40e_add_ethtool_stats(&data, vsi, i40e_gstrings_misc_stats);
 
2271
2272	rcu_read_lock();
2273	for (i = 0; i < netdev->num_tx_queues; i++) {
2274		i40e_add_queue_stats(&data, READ_ONCE(vsi->tx_rings[i]));
2275		i40e_add_queue_stats(&data, READ_ONCE(vsi->rx_rings[i]));
 
 
 
 
 
 
 
 
 
 
 
 
2276	}
2277	rcu_read_unlock();
2278
2279	if (vsi != pf->vsi[pf->lan_vsi] || pf->hw.partition_id != 1)
2280		goto check_data_pointer;
2281
2282	veb_stats = ((pf->lan_veb != I40E_NO_VEB) &&
2283		     (pf->lan_veb < I40E_MAX_VEB) &&
2284		     (pf->flags & I40E_FLAG_VEB_STATS_ENABLED));
2285
2286	if (veb_stats) {
2287		veb = pf->veb[pf->lan_veb];
2288		i40e_update_veb_stats(veb);
2289	}
2290
2291	/* If veb stats aren't enabled, pass NULL instead of the veb so that
2292	 * we initialize stats to zero and update the data pointer
2293	 * intelligently
2294	 */
2295	i40e_add_ethtool_stats(&data, veb_stats ? veb : NULL,
2296			       i40e_gstrings_veb_stats);
2297
2298	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
2299		i40e_add_ethtool_stats(&data, veb_stats ? veb : NULL,
2300				       i40e_gstrings_veb_tc_stats);
2301
2302	i40e_add_ethtool_stats(&data, pf, i40e_gstrings_stats);
2303
2304	for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
2305		struct i40e_pfc_stats pfc = i40e_get_pfc_stats(pf, i);
2306
2307		i40e_add_ethtool_stats(&data, &pfc, i40e_gstrings_pfc_stats);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2308	}
2309
2310check_data_pointer:
2311	WARN_ONCE(data - p != i40e_get_stats_count(netdev),
2312		  "ethtool stats count mismatch!");
2313}
2314
2315/**
2316 * i40e_get_stat_strings - copy stat strings into supplied buffer
2317 * @netdev: the netdev to collect strings for
2318 * @data: supplied buffer to copy strings into
2319 *
2320 * Copy the strings related to stats for this netdev. Expects data to be
2321 * pre-allocated with the size reported by i40e_get_stats_count. Note that the
2322 * strings must be copied in a static order and the total count must not
2323 * change for a given netdev. See i40e_get_stats_count for more details.
2324 **/
2325static void i40e_get_stat_strings(struct net_device *netdev, u8 *data)
2326{
2327	struct i40e_netdev_priv *np = netdev_priv(netdev);
2328	struct i40e_vsi *vsi = np->vsi;
2329	struct i40e_pf *pf = vsi->back;
2330	unsigned int i;
2331	u8 *p = data;
2332
2333	i40e_add_stat_strings(&data, i40e_gstrings_net_stats);
2334
2335	i40e_add_stat_strings(&data, i40e_gstrings_misc_stats);
2336
2337	for (i = 0; i < netdev->num_tx_queues; i++) {
2338		i40e_add_stat_strings(&data, i40e_gstrings_queue_stats,
2339				      "tx", i);
2340		i40e_add_stat_strings(&data, i40e_gstrings_queue_stats,
2341				      "rx", i);
2342	}
2343
2344	if (vsi != pf->vsi[pf->lan_vsi] || pf->hw.partition_id != 1)
2345		goto check_data_pointer;
2346
2347	i40e_add_stat_strings(&data, i40e_gstrings_veb_stats);
2348
2349	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
2350		i40e_add_stat_strings(&data, i40e_gstrings_veb_tc_stats, i);
2351
2352	i40e_add_stat_strings(&data, i40e_gstrings_stats);
2353
2354	for (i = 0; i < I40E_MAX_USER_PRIORITY; i++)
2355		i40e_add_stat_strings(&data, i40e_gstrings_pfc_stats, i);
2356
2357check_data_pointer:
2358	WARN_ONCE(data - p != i40e_get_stats_count(netdev) * ETH_GSTRING_LEN,
2359		  "stat strings count mismatch!");
2360}
2361
2362static void i40e_get_priv_flag_strings(struct net_device *netdev, u8 *data)
2363{
2364	struct i40e_netdev_priv *np = netdev_priv(netdev);
2365	struct i40e_vsi *vsi = np->vsi;
2366	struct i40e_pf *pf = vsi->back;
2367	char *p = (char *)data;
2368	unsigned int i;
2369
2370	for (i = 0; i < I40E_PRIV_FLAGS_STR_LEN; i++) {
2371		snprintf(p, ETH_GSTRING_LEN, "%s",
2372			 i40e_gstrings_priv_flags[i].flag_string);
2373		p += ETH_GSTRING_LEN;
2374	}
2375	if (pf->hw.pf_id != 0)
2376		return;
2377	for (i = 0; i < I40E_GL_PRIV_FLAGS_STR_LEN; i++) {
2378		snprintf(p, ETH_GSTRING_LEN, "%s",
2379			 i40e_gl_gstrings_priv_flags[i].flag_string);
2380		p += ETH_GSTRING_LEN;
2381	}
2382}
2383
2384static void i40e_get_strings(struct net_device *netdev, u32 stringset,
2385			     u8 *data)
2386{
2387	switch (stringset) {
2388	case ETH_SS_TEST:
2389		memcpy(data, i40e_gstrings_test,
2390		       I40E_TEST_LEN * ETH_GSTRING_LEN);
 
 
2391		break;
2392	case ETH_SS_STATS:
2393		i40e_get_stat_strings(netdev, data);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2394		break;
2395	case ETH_SS_PRIV_FLAGS:
2396		i40e_get_priv_flag_strings(netdev, data);
 
 
 
 
2397		break;
2398	default:
2399		break;
2400	}
2401}
2402
2403static int i40e_get_ts_info(struct net_device *dev,
2404			    struct ethtool_ts_info *info)
2405{
2406	struct i40e_pf *pf = i40e_netdev_to_pf(dev);
2407
2408	/* only report HW timestamping if PTP is enabled */
2409	if (!(pf->flags & I40E_FLAG_PTP))
2410		return ethtool_op_get_ts_info(dev, info);
2411
2412	info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE |
2413				SOF_TIMESTAMPING_RX_SOFTWARE |
2414				SOF_TIMESTAMPING_SOFTWARE |
2415				SOF_TIMESTAMPING_TX_HARDWARE |
2416				SOF_TIMESTAMPING_RX_HARDWARE |
2417				SOF_TIMESTAMPING_RAW_HARDWARE;
2418
2419	if (pf->ptp_clock)
2420		info->phc_index = ptp_clock_index(pf->ptp_clock);
2421	else
2422		info->phc_index = -1;
2423
2424	info->tx_types = BIT(HWTSTAMP_TX_OFF) | BIT(HWTSTAMP_TX_ON);
2425
2426	info->rx_filters = BIT(HWTSTAMP_FILTER_NONE) |
2427			   BIT(HWTSTAMP_FILTER_PTP_V2_L2_EVENT) |
2428			   BIT(HWTSTAMP_FILTER_PTP_V2_L2_SYNC) |
2429			   BIT(HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ);
2430
2431	if (pf->hw_features & I40E_HW_PTP_L4_CAPABLE)
2432		info->rx_filters |= BIT(HWTSTAMP_FILTER_PTP_V1_L4_SYNC) |
2433				    BIT(HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) |
2434				    BIT(HWTSTAMP_FILTER_PTP_V2_EVENT) |
2435				    BIT(HWTSTAMP_FILTER_PTP_V2_L4_EVENT) |
2436				    BIT(HWTSTAMP_FILTER_PTP_V2_SYNC) |
2437				    BIT(HWTSTAMP_FILTER_PTP_V2_L4_SYNC) |
2438				    BIT(HWTSTAMP_FILTER_PTP_V2_DELAY_REQ) |
2439				    BIT(HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ);
2440
2441	return 0;
2442}
2443
2444static u64 i40e_link_test(struct net_device *netdev, u64 *data)
2445{
2446	struct i40e_netdev_priv *np = netdev_priv(netdev);
2447	struct i40e_pf *pf = np->vsi->back;
2448	i40e_status status;
2449	bool link_up = false;
2450
2451	netif_info(pf, hw, netdev, "link test\n");
2452	status = i40e_get_link_status(&pf->hw, &link_up);
2453	if (status) {
2454		netif_err(pf, drv, netdev, "link query timed out, please retry test\n");
2455		*data = 1;
2456		return *data;
2457	}
2458
2459	if (link_up)
2460		*data = 0;
2461	else
2462		*data = 1;
2463
2464	return *data;
2465}
2466
2467static u64 i40e_reg_test(struct net_device *netdev, u64 *data)
2468{
2469	struct i40e_netdev_priv *np = netdev_priv(netdev);
2470	struct i40e_pf *pf = np->vsi->back;
2471
2472	netif_info(pf, hw, netdev, "register test\n");
2473	*data = i40e_diag_reg_test(&pf->hw);
2474
2475	return *data;
2476}
2477
2478static u64 i40e_eeprom_test(struct net_device *netdev, u64 *data)
2479{
2480	struct i40e_netdev_priv *np = netdev_priv(netdev);
2481	struct i40e_pf *pf = np->vsi->back;
2482
2483	netif_info(pf, hw, netdev, "eeprom test\n");
2484	*data = i40e_diag_eeprom_test(&pf->hw);
2485
2486	/* forcebly clear the NVM Update state machine */
2487	pf->hw.nvmupd_state = I40E_NVMUPD_STATE_INIT;
2488
2489	return *data;
2490}
2491
2492static u64 i40e_intr_test(struct net_device *netdev, u64 *data)
2493{
2494	struct i40e_netdev_priv *np = netdev_priv(netdev);
2495	struct i40e_pf *pf = np->vsi->back;
2496	u16 swc_old = pf->sw_int_count;
2497
2498	netif_info(pf, hw, netdev, "interrupt test\n");
2499	wr32(&pf->hw, I40E_PFINT_DYN_CTL0,
2500	     (I40E_PFINT_DYN_CTL0_INTENA_MASK |
2501	      I40E_PFINT_DYN_CTL0_SWINT_TRIG_MASK |
2502	      I40E_PFINT_DYN_CTL0_ITR_INDX_MASK |
2503	      I40E_PFINT_DYN_CTL0_SW_ITR_INDX_ENA_MASK |
2504	      I40E_PFINT_DYN_CTL0_SW_ITR_INDX_MASK));
2505	usleep_range(1000, 2000);
2506	*data = (swc_old == pf->sw_int_count);
2507
2508	return *data;
2509}
2510
 
 
 
 
 
 
 
 
 
 
 
2511static inline bool i40e_active_vfs(struct i40e_pf *pf)
2512{
2513	struct i40e_vf *vfs = pf->vf;
2514	int i;
2515
2516	for (i = 0; i < pf->num_alloc_vfs; i++)
2517		if (test_bit(I40E_VF_STATE_ACTIVE, &vfs[i].vf_states))
2518			return true;
2519	return false;
2520}
2521
2522static inline bool i40e_active_vmdqs(struct i40e_pf *pf)
2523{
2524	return !!i40e_find_vsi_by_type(pf, I40E_VSI_VMDQ2);
 
 
 
 
 
 
 
 
 
 
2525}
2526
2527static void i40e_diag_test(struct net_device *netdev,
2528			   struct ethtool_test *eth_test, u64 *data)
2529{
2530	struct i40e_netdev_priv *np = netdev_priv(netdev);
2531	bool if_running = netif_running(netdev);
2532	struct i40e_pf *pf = np->vsi->back;
2533
2534	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
2535		/* Offline tests */
2536		netif_info(pf, drv, netdev, "offline testing starting\n");
2537
2538		set_bit(__I40E_TESTING, pf->state);
2539
2540		if (i40e_active_vfs(pf) || i40e_active_vmdqs(pf)) {
2541			dev_warn(&pf->pdev->dev,
2542				 "Please take active VFs and Netqueues offline and restart the adapter before running NIC diagnostics\n");
2543			data[I40E_ETH_TEST_REG]		= 1;
2544			data[I40E_ETH_TEST_EEPROM]	= 1;
2545			data[I40E_ETH_TEST_INTR]	= 1;
 
2546			data[I40E_ETH_TEST_LINK]	= 1;
2547			eth_test->flags |= ETH_TEST_FL_FAILED;
2548			clear_bit(__I40E_TESTING, pf->state);
2549			goto skip_ol_tests;
2550		}
2551
2552		/* If the device is online then take it offline */
2553		if (if_running)
2554			/* indicate we're in test mode */
2555			i40e_close(netdev);
2556		else
2557			/* This reset does not affect link - if it is
2558			 * changed to a type of reset that does affect
2559			 * link then the following link test would have
2560			 * to be moved to before the reset
2561			 */
2562			i40e_do_reset(pf, BIT(__I40E_PF_RESET_REQUESTED), true);
2563
2564		if (i40e_link_test(netdev, &data[I40E_ETH_TEST_LINK]))
2565			eth_test->flags |= ETH_TEST_FL_FAILED;
2566
2567		if (i40e_eeprom_test(netdev, &data[I40E_ETH_TEST_EEPROM]))
2568			eth_test->flags |= ETH_TEST_FL_FAILED;
2569
2570		if (i40e_intr_test(netdev, &data[I40E_ETH_TEST_INTR]))
2571			eth_test->flags |= ETH_TEST_FL_FAILED;
2572
 
 
 
2573		/* run reg test last, a reset is required after it */
2574		if (i40e_reg_test(netdev, &data[I40E_ETH_TEST_REG]))
2575			eth_test->flags |= ETH_TEST_FL_FAILED;
2576
2577		clear_bit(__I40E_TESTING, pf->state);
2578		i40e_do_reset(pf, BIT(__I40E_PF_RESET_REQUESTED), true);
2579
2580		if (if_running)
2581			i40e_open(netdev);
2582	} else {
2583		/* Online tests */
2584		netif_info(pf, drv, netdev, "online testing starting\n");
2585
2586		if (i40e_link_test(netdev, &data[I40E_ETH_TEST_LINK]))
2587			eth_test->flags |= ETH_TEST_FL_FAILED;
2588
2589		/* Offline only tests, not run in online; pass by default */
2590		data[I40E_ETH_TEST_REG] = 0;
2591		data[I40E_ETH_TEST_EEPROM] = 0;
2592		data[I40E_ETH_TEST_INTR] = 0;
 
2593	}
2594
2595skip_ol_tests:
2596
2597	netif_info(pf, drv, netdev, "testing finished\n");
2598}
2599
2600static void i40e_get_wol(struct net_device *netdev,
2601			 struct ethtool_wolinfo *wol)
2602{
2603	struct i40e_netdev_priv *np = netdev_priv(netdev);
2604	struct i40e_pf *pf = np->vsi->back;
2605	struct i40e_hw *hw = &pf->hw;
2606	u16 wol_nvm_bits;
2607
2608	/* NVM bit on means WoL disabled for the port */
2609	i40e_read_nvm_word(hw, I40E_SR_NVM_WAKE_ON_LAN, &wol_nvm_bits);
2610	if ((BIT(hw->port) & wol_nvm_bits) || (hw->partition_id != 1)) {
2611		wol->supported = 0;
2612		wol->wolopts = 0;
2613	} else {
2614		wol->supported = WAKE_MAGIC;
2615		wol->wolopts = (pf->wol_en ? WAKE_MAGIC : 0);
2616	}
2617}
2618
2619/**
2620 * i40e_set_wol - set the WakeOnLAN configuration
2621 * @netdev: the netdev in question
2622 * @wol: the ethtool WoL setting data
2623 **/
2624static int i40e_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
2625{
2626	struct i40e_netdev_priv *np = netdev_priv(netdev);
2627	struct i40e_pf *pf = np->vsi->back;
2628	struct i40e_vsi *vsi = np->vsi;
2629	struct i40e_hw *hw = &pf->hw;
2630	u16 wol_nvm_bits;
2631
2632	/* WoL not supported if this isn't the controlling PF on the port */
2633	if (hw->partition_id != 1) {
2634		i40e_partition_setting_complaint(pf);
2635		return -EOPNOTSUPP;
2636	}
2637
2638	if (vsi != pf->vsi[pf->lan_vsi])
2639		return -EOPNOTSUPP;
2640
2641	/* NVM bit on means WoL disabled for the port */
2642	i40e_read_nvm_word(hw, I40E_SR_NVM_WAKE_ON_LAN, &wol_nvm_bits);
2643	if (BIT(hw->port) & wol_nvm_bits)
2644		return -EOPNOTSUPP;
2645
2646	/* only magic packet is supported */
2647	if (wol->wolopts & ~WAKE_MAGIC)
2648		return -EOPNOTSUPP;
2649
2650	/* is this a new value? */
2651	if (pf->wol_en != !!wol->wolopts) {
2652		pf->wol_en = !!wol->wolopts;
2653		device_set_wakeup_enable(&pf->pdev->dev, pf->wol_en);
2654	}
2655
2656	return 0;
2657}
2658
2659static int i40e_set_phys_id(struct net_device *netdev,
2660			    enum ethtool_phys_id_state state)
2661{
2662	struct i40e_netdev_priv *np = netdev_priv(netdev);
2663	i40e_status ret = 0;
2664	struct i40e_pf *pf = np->vsi->back;
2665	struct i40e_hw *hw = &pf->hw;
2666	int blink_freq = 2;
2667	u16 temp_status;
2668
2669	switch (state) {
2670	case ETHTOOL_ID_ACTIVE:
2671		if (!(pf->hw_features & I40E_HW_PHY_CONTROLS_LEDS)) {
2672			pf->led_status = i40e_led_get(hw);
2673		} else {
2674			if (!(hw->flags & I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE))
2675				i40e_aq_set_phy_debug(hw, I40E_PHY_DEBUG_ALL,
2676						      NULL);
2677			ret = i40e_led_get_phy(hw, &temp_status,
2678					       &pf->phy_led_val);
2679			pf->led_status = temp_status;
2680		}
2681		return blink_freq;
2682	case ETHTOOL_ID_ON:
2683		if (!(pf->hw_features & I40E_HW_PHY_CONTROLS_LEDS))
2684			i40e_led_set(hw, 0xf, false);
2685		else
2686			ret = i40e_led_set_phy(hw, true, pf->led_status, 0);
2687		break;
2688	case ETHTOOL_ID_OFF:
2689		if (!(pf->hw_features & I40E_HW_PHY_CONTROLS_LEDS))
2690			i40e_led_set(hw, 0x0, false);
2691		else
2692			ret = i40e_led_set_phy(hw, false, pf->led_status, 0);
2693		break;
2694	case ETHTOOL_ID_INACTIVE:
2695		if (!(pf->hw_features & I40E_HW_PHY_CONTROLS_LEDS)) {
2696			i40e_led_set(hw, pf->led_status, false);
2697		} else {
2698			ret = i40e_led_set_phy(hw, false, pf->led_status,
2699					       (pf->phy_led_val |
2700					       I40E_PHY_LED_MODE_ORIG));
2701			if (!(hw->flags & I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE))
2702				i40e_aq_set_phy_debug(hw, 0, NULL);
2703		}
2704		break;
2705	default:
2706		break;
2707	}
2708	if (ret)
2709		return -ENOENT;
2710	else
2711		return 0;
2712}
2713
2714/* NOTE: i40e hardware uses a conversion factor of 2 for Interrupt
2715 * Throttle Rate (ITR) ie. ITR(1) = 2us ITR(10) = 20 us, and also
2716 * 125us (8000 interrupts per second) == ITR(62)
2717 */
2718
2719/**
2720 * __i40e_get_coalesce - get per-queue coalesce settings
2721 * @netdev: the netdev to check
2722 * @ec: ethtool coalesce data structure
2723 * @queue: which queue to pick
2724 *
2725 * Gets the per-queue settings for coalescence. Specifically Rx and Tx usecs
2726 * are per queue. If queue is <0 then we default to queue 0 as the
2727 * representative value.
2728 **/
2729static int __i40e_get_coalesce(struct net_device *netdev,
2730			       struct ethtool_coalesce *ec,
2731			       int queue)
2732{
2733	struct i40e_netdev_priv *np = netdev_priv(netdev);
2734	struct i40e_ring *rx_ring, *tx_ring;
2735	struct i40e_vsi *vsi = np->vsi;
2736
2737	ec->tx_max_coalesced_frames_irq = vsi->work_limit;
2738	ec->rx_max_coalesced_frames_irq = vsi->work_limit;
2739
2740	/* rx and tx usecs has per queue value. If user doesn't specify the
2741	 * queue, return queue 0's value to represent.
2742	 */
2743	if (queue < 0)
2744		queue = 0;
2745	else if (queue >= vsi->num_queue_pairs)
2746		return -EINVAL;
 
2747
2748	rx_ring = vsi->rx_rings[queue];
2749	tx_ring = vsi->tx_rings[queue];
2750
2751	if (ITR_IS_DYNAMIC(rx_ring->itr_setting))
2752		ec->use_adaptive_rx_coalesce = 1;
2753
2754	if (ITR_IS_DYNAMIC(tx_ring->itr_setting))
2755		ec->use_adaptive_tx_coalesce = 1;
2756
2757	ec->rx_coalesce_usecs = rx_ring->itr_setting & ~I40E_ITR_DYNAMIC;
2758	ec->tx_coalesce_usecs = tx_ring->itr_setting & ~I40E_ITR_DYNAMIC;
2759
2760	/* we use the _usecs_high to store/set the interrupt rate limit
2761	 * that the hardware supports, that almost but not quite
2762	 * fits the original intent of the ethtool variable,
2763	 * the rx_coalesce_usecs_high limits total interrupts
2764	 * per second from both tx/rx sources.
2765	 */
2766	ec->rx_coalesce_usecs_high = vsi->int_rate_limit;
2767	ec->tx_coalesce_usecs_high = vsi->int_rate_limit;
2768
2769	return 0;
2770}
2771
2772/**
2773 * i40e_get_coalesce - get a netdev's coalesce settings
2774 * @netdev: the netdev to check
2775 * @ec: ethtool coalesce data structure
2776 *
2777 * Gets the coalesce settings for a particular netdev. Note that if user has
2778 * modified per-queue settings, this only guarantees to represent queue 0. See
2779 * __i40e_get_coalesce for more details.
2780 **/
2781static int i40e_get_coalesce(struct net_device *netdev,
2782			     struct ethtool_coalesce *ec)
2783{
2784	return __i40e_get_coalesce(netdev, ec, -1);
2785}
2786
2787/**
2788 * i40e_get_per_queue_coalesce - gets coalesce settings for particular queue
2789 * @netdev: netdev structure
2790 * @ec: ethtool's coalesce settings
2791 * @queue: the particular queue to read
2792 *
2793 * Will read a specific queue's coalesce settings
2794 **/
2795static int i40e_get_per_queue_coalesce(struct net_device *netdev, u32 queue,
2796				       struct ethtool_coalesce *ec)
2797{
2798	return __i40e_get_coalesce(netdev, ec, queue);
2799}
2800
2801/**
2802 * i40e_set_itr_per_queue - set ITR values for specific queue
2803 * @vsi: the VSI to set values for
2804 * @ec: coalesce settings from ethtool
2805 * @queue: the queue to modify
2806 *
2807 * Change the ITR settings for a specific queue.
2808 **/
2809static void i40e_set_itr_per_queue(struct i40e_vsi *vsi,
2810				   struct ethtool_coalesce *ec,
2811				   int queue)
2812{
2813	struct i40e_ring *rx_ring = vsi->rx_rings[queue];
2814	struct i40e_ring *tx_ring = vsi->tx_rings[queue];
2815	struct i40e_pf *pf = vsi->back;
2816	struct i40e_hw *hw = &pf->hw;
2817	struct i40e_q_vector *q_vector;
2818	u16 intrl;
2819
2820	intrl = i40e_intrl_usec_to_reg(vsi->int_rate_limit);
2821
2822	rx_ring->itr_setting = ITR_REG_ALIGN(ec->rx_coalesce_usecs);
2823	tx_ring->itr_setting = ITR_REG_ALIGN(ec->tx_coalesce_usecs);
2824
2825	if (ec->use_adaptive_rx_coalesce)
2826		rx_ring->itr_setting |= I40E_ITR_DYNAMIC;
2827	else
2828		rx_ring->itr_setting &= ~I40E_ITR_DYNAMIC;
2829
2830	if (ec->use_adaptive_tx_coalesce)
2831		tx_ring->itr_setting |= I40E_ITR_DYNAMIC;
2832	else
2833		tx_ring->itr_setting &= ~I40E_ITR_DYNAMIC;
2834
2835	q_vector = rx_ring->q_vector;
2836	q_vector->rx.target_itr = ITR_TO_REG(rx_ring->itr_setting);
 
 
2837
2838	q_vector = tx_ring->q_vector;
2839	q_vector->tx.target_itr = ITR_TO_REG(tx_ring->itr_setting);
2840
2841	/* The interrupt handler itself will take care of programming
2842	 * the Tx and Rx ITR values based on the values we have entered
2843	 * into the q_vector, no need to write the values now.
2844	 */
2845
2846	wr32(hw, I40E_PFINT_RATEN(q_vector->reg_idx), intrl);
2847	i40e_flush(hw);
2848}
2849
2850/**
2851 * __i40e_set_coalesce - set coalesce settings for particular queue
2852 * @netdev: the netdev to change
2853 * @ec: ethtool coalesce settings
2854 * @queue: the queue to change
2855 *
2856 * Sets the coalesce settings for a particular queue.
2857 **/
2858static int __i40e_set_coalesce(struct net_device *netdev,
2859			       struct ethtool_coalesce *ec,
2860			       int queue)
2861{
2862	struct i40e_netdev_priv *np = netdev_priv(netdev);
2863	u16 intrl_reg, cur_rx_itr, cur_tx_itr;
2864	struct i40e_vsi *vsi = np->vsi;
2865	struct i40e_pf *pf = vsi->back;
2866	int i;
2867
2868	if (ec->tx_max_coalesced_frames_irq || ec->rx_max_coalesced_frames_irq)
2869		vsi->work_limit = ec->tx_max_coalesced_frames_irq;
2870
2871	if (queue < 0) {
2872		cur_rx_itr = vsi->rx_rings[0]->itr_setting;
2873		cur_tx_itr = vsi->tx_rings[0]->itr_setting;
2874	} else if (queue < vsi->num_queue_pairs) {
2875		cur_rx_itr = vsi->rx_rings[queue]->itr_setting;
2876		cur_tx_itr = vsi->tx_rings[queue]->itr_setting;
2877	} else {
2878		netif_info(pf, drv, netdev, "Invalid queue value, queue range is 0 - %d\n",
2879			   vsi->num_queue_pairs - 1);
2880		return -EINVAL;
2881	}
2882
2883	cur_tx_itr &= ~I40E_ITR_DYNAMIC;
2884	cur_rx_itr &= ~I40E_ITR_DYNAMIC;
2885
2886	/* tx_coalesce_usecs_high is ignored, use rx-usecs-high instead */
2887	if (ec->tx_coalesce_usecs_high != vsi->int_rate_limit) {
2888		netif_info(pf, drv, netdev, "tx-usecs-high is not used, please program rx-usecs-high\n");
2889		return -EINVAL;
2890	}
2891
2892	if (ec->rx_coalesce_usecs_high > INTRL_REG_TO_USEC(I40E_MAX_INTRL)) {
2893		netif_info(pf, drv, netdev, "Invalid value, rx-usecs-high range is 0-%lu\n",
2894			   INTRL_REG_TO_USEC(I40E_MAX_INTRL));
2895		return -EINVAL;
2896	}
2897
2898	if (ec->rx_coalesce_usecs != cur_rx_itr &&
2899	    ec->use_adaptive_rx_coalesce) {
2900		netif_info(pf, drv, netdev, "RX interrupt moderation cannot be changed if adaptive-rx is enabled.\n");
2901		return -EINVAL;
2902	}
2903
2904	if (ec->rx_coalesce_usecs > I40E_MAX_ITR) {
2905		netif_info(pf, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n");
2906		return -EINVAL;
2907	}
2908
2909	if (ec->tx_coalesce_usecs != cur_tx_itr &&
2910	    ec->use_adaptive_tx_coalesce) {
2911		netif_info(pf, drv, netdev, "TX interrupt moderation cannot be changed if adaptive-tx is enabled.\n");
2912		return -EINVAL;
2913	}
2914
2915	if (ec->tx_coalesce_usecs > I40E_MAX_ITR) {
2916		netif_info(pf, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n");
2917		return -EINVAL;
 
 
 
 
2918	}
2919
2920	if (ec->use_adaptive_rx_coalesce && !cur_rx_itr)
2921		ec->rx_coalesce_usecs = I40E_MIN_ITR;
2922
2923	if (ec->use_adaptive_tx_coalesce && !cur_tx_itr)
2924		ec->tx_coalesce_usecs = I40E_MIN_ITR;
2925
2926	intrl_reg = i40e_intrl_usec_to_reg(ec->rx_coalesce_usecs_high);
2927	vsi->int_rate_limit = INTRL_REG_TO_USEC(intrl_reg);
2928	if (vsi->int_rate_limit != ec->rx_coalesce_usecs_high) {
2929		netif_info(pf, drv, netdev, "Interrupt rate limit rounded down to %d\n",
2930			   vsi->int_rate_limit);
2931	}
2932
2933	/* rx and tx usecs has per queue value. If user doesn't specify the
2934	 * queue, apply to all queues.
2935	 */
2936	if (queue < 0) {
2937		for (i = 0; i < vsi->num_queue_pairs; i++)
2938			i40e_set_itr_per_queue(vsi, ec, i);
2939	} else {
2940		i40e_set_itr_per_queue(vsi, ec, queue);
 
 
 
 
2941	}
2942
2943	return 0;
2944}
2945
2946/**
2947 * i40e_set_coalesce - set coalesce settings for every queue on the netdev
2948 * @netdev: the netdev to change
2949 * @ec: ethtool coalesce settings
2950 *
2951 * This will set each queue to the same coalesce settings.
2952 **/
2953static int i40e_set_coalesce(struct net_device *netdev,
2954			     struct ethtool_coalesce *ec)
2955{
2956	return __i40e_set_coalesce(netdev, ec, -1);
2957}
2958
2959/**
2960 * i40e_set_per_queue_coalesce - set specific queue's coalesce settings
2961 * @netdev: the netdev to change
2962 * @ec: ethtool's coalesce settings
2963 * @queue: the queue to change
2964 *
2965 * Sets the specified queue's coalesce settings.
2966 **/
2967static int i40e_set_per_queue_coalesce(struct net_device *netdev, u32 queue,
2968				       struct ethtool_coalesce *ec)
2969{
2970	return __i40e_set_coalesce(netdev, ec, queue);
2971}
2972
2973/**
2974 * i40e_get_rss_hash_opts - Get RSS hash Input Set for each flow type
2975 * @pf: pointer to the physical function struct
2976 * @cmd: ethtool rxnfc command
2977 *
2978 * Returns Success if the flow is supported, else Invalid Input.
2979 **/
2980static int i40e_get_rss_hash_opts(struct i40e_pf *pf, struct ethtool_rxnfc *cmd)
2981{
2982	struct i40e_hw *hw = &pf->hw;
2983	u8 flow_pctype = 0;
2984	u64 i_set = 0;
2985
2986	cmd->data = 0;
2987
 
 
 
 
 
 
2988	switch (cmd->flow_type) {
2989	case TCP_V4_FLOW:
2990		flow_pctype = I40E_FILTER_PCTYPE_NONF_IPV4_TCP;
2991		break;
2992	case UDP_V4_FLOW:
2993		flow_pctype = I40E_FILTER_PCTYPE_NONF_IPV4_UDP;
2994		break;
2995	case TCP_V6_FLOW:
2996		flow_pctype = I40E_FILTER_PCTYPE_NONF_IPV6_TCP;
2997		break;
2998	case UDP_V6_FLOW:
2999		flow_pctype = I40E_FILTER_PCTYPE_NONF_IPV6_UDP;
3000		break;
3001	case SCTP_V4_FLOW:
3002	case AH_ESP_V4_FLOW:
3003	case AH_V4_FLOW:
3004	case ESP_V4_FLOW:
3005	case IPV4_FLOW:
 
 
 
 
 
 
3006	case SCTP_V6_FLOW:
3007	case AH_ESP_V6_FLOW:
3008	case AH_V6_FLOW:
3009	case ESP_V6_FLOW:
3010	case IPV6_FLOW:
3011		/* Default is src/dest for IP, no matter the L4 hashing */
3012		cmd->data |= RXH_IP_SRC | RXH_IP_DST;
3013		break;
3014	default:
3015		return -EINVAL;
3016	}
3017
3018	/* Read flow based hash input set register */
3019	if (flow_pctype) {
3020		i_set = (u64)i40e_read_rx_ctl(hw, I40E_GLQF_HASH_INSET(0,
3021					      flow_pctype)) |
3022			((u64)i40e_read_rx_ctl(hw, I40E_GLQF_HASH_INSET(1,
3023					       flow_pctype)) << 32);
3024	}
3025
3026	/* Process bits of hash input set */
3027	if (i_set) {
3028		if (i_set & I40E_L4_SRC_MASK)
3029			cmd->data |= RXH_L4_B_0_1;
3030		if (i_set & I40E_L4_DST_MASK)
3031			cmd->data |= RXH_L4_B_2_3;
3032
3033		if (cmd->flow_type == TCP_V4_FLOW ||
3034		    cmd->flow_type == UDP_V4_FLOW) {
3035			if (i_set & I40E_L3_SRC_MASK)
3036				cmd->data |= RXH_IP_SRC;
3037			if (i_set & I40E_L3_DST_MASK)
3038				cmd->data |= RXH_IP_DST;
3039		} else if (cmd->flow_type == TCP_V6_FLOW ||
3040			  cmd->flow_type == UDP_V6_FLOW) {
3041			if (i_set & I40E_L3_V6_SRC_MASK)
3042				cmd->data |= RXH_IP_SRC;
3043			if (i_set & I40E_L3_V6_DST_MASK)
3044				cmd->data |= RXH_IP_DST;
3045		}
3046	}
3047
3048	return 0;
3049}
3050
3051/**
3052 * i40e_check_mask - Check whether a mask field is set
3053 * @mask: the full mask value
3054 * @field: mask of the field to check
3055 *
3056 * If the given mask is fully set, return positive value. If the mask for the
3057 * field is fully unset, return zero. Otherwise return a negative error code.
3058 **/
3059static int i40e_check_mask(u64 mask, u64 field)
3060{
3061	u64 value = mask & field;
3062
3063	if (value == field)
3064		return 1;
3065	else if (!value)
3066		return 0;
3067	else
3068		return -1;
3069}
3070
3071/**
3072 * i40e_parse_rx_flow_user_data - Deconstruct user-defined data
3073 * @fsp: pointer to rx flow specification
3074 * @data: pointer to userdef data structure for storage
3075 *
3076 * Read the user-defined data and deconstruct the value into a structure. No
3077 * other code should read the user-defined data, so as to ensure that every
3078 * place consistently reads the value correctly.
3079 *
3080 * The user-defined field is a 64bit Big Endian format value, which we
3081 * deconstruct by reading bits or bit fields from it. Single bit flags shall
3082 * be defined starting from the highest bits, while small bit field values
3083 * shall be defined starting from the lowest bits.
3084 *
3085 * Returns 0 if the data is valid, and non-zero if the userdef data is invalid
3086 * and the filter should be rejected. The data structure will always be
3087 * modified even if FLOW_EXT is not set.
3088 *
3089 **/
3090static int i40e_parse_rx_flow_user_data(struct ethtool_rx_flow_spec *fsp,
3091					struct i40e_rx_flow_userdef *data)
3092{
3093	u64 value, mask;
3094	int valid;
3095
3096	/* Zero memory first so it's always consistent. */
3097	memset(data, 0, sizeof(*data));
3098
3099	if (!(fsp->flow_type & FLOW_EXT))
3100		return 0;
3101
3102	value = be64_to_cpu(*((__be64 *)fsp->h_ext.data));
3103	mask = be64_to_cpu(*((__be64 *)fsp->m_ext.data));
3104
3105#define I40E_USERDEF_FLEX_WORD		GENMASK_ULL(15, 0)
3106#define I40E_USERDEF_FLEX_OFFSET	GENMASK_ULL(31, 16)
3107#define I40E_USERDEF_FLEX_FILTER	GENMASK_ULL(31, 0)
3108
3109	valid = i40e_check_mask(mask, I40E_USERDEF_FLEX_FILTER);
3110	if (valid < 0) {
3111		return -EINVAL;
3112	} else if (valid) {
3113		data->flex_word = value & I40E_USERDEF_FLEX_WORD;
3114		data->flex_offset =
3115			(value & I40E_USERDEF_FLEX_OFFSET) >> 16;
3116		data->flex_filter = true;
3117	}
3118
3119	return 0;
3120}
3121
3122/**
3123 * i40e_fill_rx_flow_user_data - Fill in user-defined data field
3124 * @fsp: pointer to rx_flow specification
3125 * @data: pointer to return userdef data
3126 *
3127 * Reads the userdef data structure and properly fills in the user defined
3128 * fields of the rx_flow_spec.
3129 **/
3130static void i40e_fill_rx_flow_user_data(struct ethtool_rx_flow_spec *fsp,
3131					struct i40e_rx_flow_userdef *data)
3132{
3133	u64 value = 0, mask = 0;
3134
3135	if (data->flex_filter) {
3136		value |= data->flex_word;
3137		value |= (u64)data->flex_offset << 16;
3138		mask |= I40E_USERDEF_FLEX_FILTER;
3139	}
3140
3141	if (value || mask)
3142		fsp->flow_type |= FLOW_EXT;
3143
3144	*((__be64 *)fsp->h_ext.data) = cpu_to_be64(value);
3145	*((__be64 *)fsp->m_ext.data) = cpu_to_be64(mask);
3146}
3147
3148/**
3149 * i40e_get_ethtool_fdir_all - Populates the rule count of a command
3150 * @pf: Pointer to the physical function struct
3151 * @cmd: The command to get or set Rx flow classification rules
3152 * @rule_locs: Array of used rule locations
3153 *
3154 * This function populates both the total and actual rule count of
3155 * the ethtool flow classification command
3156 *
3157 * Returns 0 on success or -EMSGSIZE if entry not found
3158 **/
3159static int i40e_get_ethtool_fdir_all(struct i40e_pf *pf,
3160				     struct ethtool_rxnfc *cmd,
3161				     u32 *rule_locs)
3162{
3163	struct i40e_fdir_filter *rule;
3164	struct hlist_node *node2;
3165	int cnt = 0;
3166
3167	/* report total rule count */
3168	cmd->data = i40e_get_fd_cnt_all(pf);
3169
3170	hlist_for_each_entry_safe(rule, node2,
3171				  &pf->fdir_filter_list, fdir_node) {
3172		if (cnt == cmd->rule_cnt)
3173			return -EMSGSIZE;
3174
3175		rule_locs[cnt] = rule->fd_id;
3176		cnt++;
3177	}
3178
3179	cmd->rule_cnt = cnt;
3180
3181	return 0;
3182}
3183
3184/**
3185 * i40e_get_ethtool_fdir_entry - Look up a filter based on Rx flow
3186 * @pf: Pointer to the physical function struct
3187 * @cmd: The command to get or set Rx flow classification rules
3188 *
3189 * This function looks up a filter based on the Rx flow classification
3190 * command and fills the flow spec info for it if found
3191 *
3192 * Returns 0 on success or -EINVAL if filter not found
3193 **/
3194static int i40e_get_ethtool_fdir_entry(struct i40e_pf *pf,
3195				       struct ethtool_rxnfc *cmd)
3196{
3197	struct ethtool_rx_flow_spec *fsp =
3198			(struct ethtool_rx_flow_spec *)&cmd->fs;
3199	struct i40e_rx_flow_userdef userdef = {0};
3200	struct i40e_fdir_filter *rule = NULL;
3201	struct hlist_node *node2;
3202	u64 input_set;
3203	u16 index;
3204
3205	hlist_for_each_entry_safe(rule, node2,
3206				  &pf->fdir_filter_list, fdir_node) {
3207		if (fsp->location <= rule->fd_id)
3208			break;
3209	}
3210
3211	if (!rule || fsp->location != rule->fd_id)
3212		return -EINVAL;
3213
3214	fsp->flow_type = rule->flow_type;
3215	if (fsp->flow_type == IP_USER_FLOW) {
3216		fsp->h_u.usr_ip4_spec.ip_ver = ETH_RX_NFC_IP4;
3217		fsp->h_u.usr_ip4_spec.proto = 0;
3218		fsp->m_u.usr_ip4_spec.proto = 0;
3219	}
3220
3221	/* Reverse the src and dest notion, since the HW views them from
3222	 * Tx perspective where as the user expects it from Rx filter view.
3223	 */
3224	fsp->h_u.tcp_ip4_spec.psrc = rule->dst_port;
3225	fsp->h_u.tcp_ip4_spec.pdst = rule->src_port;
3226	fsp->h_u.tcp_ip4_spec.ip4src = rule->dst_ip;
3227	fsp->h_u.tcp_ip4_spec.ip4dst = rule->src_ip;
3228
3229	switch (rule->flow_type) {
3230	case SCTP_V4_FLOW:
3231		index = I40E_FILTER_PCTYPE_NONF_IPV4_SCTP;
3232		break;
3233	case TCP_V4_FLOW:
3234		index = I40E_FILTER_PCTYPE_NONF_IPV4_TCP;
3235		break;
3236	case UDP_V4_FLOW:
3237		index = I40E_FILTER_PCTYPE_NONF_IPV4_UDP;
3238		break;
3239	case IP_USER_FLOW:
3240		index = I40E_FILTER_PCTYPE_NONF_IPV4_OTHER;
3241		break;
3242	default:
3243		/* If we have stored a filter with a flow type not listed here
3244		 * it is almost certainly a driver bug. WARN(), and then
3245		 * assign the input_set as if all fields are enabled to avoid
3246		 * reading unassigned memory.
3247		 */
3248		WARN(1, "Missing input set index for flow_type %d\n",
3249		     rule->flow_type);
3250		input_set = 0xFFFFFFFFFFFFFFFFULL;
3251		goto no_input_set;
3252	}
3253
3254	input_set = i40e_read_fd_input_set(pf, index);
3255
3256no_input_set:
3257	if (input_set & I40E_L3_SRC_MASK)
3258		fsp->m_u.tcp_ip4_spec.ip4src = htonl(0xFFFFFFFF);
3259
3260	if (input_set & I40E_L3_DST_MASK)
3261		fsp->m_u.tcp_ip4_spec.ip4dst = htonl(0xFFFFFFFF);
3262
3263	if (input_set & I40E_L4_SRC_MASK)
3264		fsp->m_u.tcp_ip4_spec.psrc = htons(0xFFFF);
3265
3266	if (input_set & I40E_L4_DST_MASK)
3267		fsp->m_u.tcp_ip4_spec.pdst = htons(0xFFFF);
3268
3269	if (rule->dest_ctl == I40E_FILTER_PROGRAM_DESC_DEST_DROP_PACKET)
3270		fsp->ring_cookie = RX_CLS_FLOW_DISC;
3271	else
3272		fsp->ring_cookie = rule->q_index;
3273
3274	if (rule->dest_vsi != pf->vsi[pf->lan_vsi]->id) {
3275		struct i40e_vsi *vsi;
3276
3277		vsi = i40e_find_vsi_from_id(pf, rule->dest_vsi);
3278		if (vsi && vsi->type == I40E_VSI_SRIOV) {
3279			/* VFs are zero-indexed by the driver, but ethtool
3280			 * expects them to be one-indexed, so add one here
3281			 */
3282			u64 ring_vf = vsi->vf_id + 1;
3283
3284			ring_vf <<= ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF;
3285			fsp->ring_cookie |= ring_vf;
3286		}
3287	}
3288
3289	if (rule->flex_filter) {
3290		userdef.flex_filter = true;
3291		userdef.flex_word = be16_to_cpu(rule->flex_word);
3292		userdef.flex_offset = rule->flex_offset;
3293	}
3294
3295	i40e_fill_rx_flow_user_data(fsp, &userdef);
3296
3297	return 0;
3298}
3299
3300/**
3301 * i40e_get_rxnfc - command to get RX flow classification rules
3302 * @netdev: network interface device structure
3303 * @cmd: ethtool rxnfc command
3304 * @rule_locs: pointer to store rule data
3305 *
3306 * Returns Success if the command is supported.
3307 **/
3308static int i40e_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd,
3309			  u32 *rule_locs)
3310{
3311	struct i40e_netdev_priv *np = netdev_priv(netdev);
3312	struct i40e_vsi *vsi = np->vsi;
3313	struct i40e_pf *pf = vsi->back;
3314	int ret = -EOPNOTSUPP;
3315
3316	switch (cmd->cmd) {
3317	case ETHTOOL_GRXRINGS:
3318		cmd->data = vsi->rss_size;
3319		ret = 0;
3320		break;
3321	case ETHTOOL_GRXFH:
3322		ret = i40e_get_rss_hash_opts(pf, cmd);
3323		break;
3324	case ETHTOOL_GRXCLSRLCNT:
3325		cmd->rule_cnt = pf->fdir_pf_active_filters;
3326		/* report total rule count */
3327		cmd->data = i40e_get_fd_cnt_all(pf);
3328		ret = 0;
3329		break;
3330	case ETHTOOL_GRXCLSRULE:
3331		ret = i40e_get_ethtool_fdir_entry(pf, cmd);
3332		break;
3333	case ETHTOOL_GRXCLSRLALL:
3334		ret = i40e_get_ethtool_fdir_all(pf, cmd, rule_locs);
3335		break;
3336	default:
3337		break;
3338	}
3339
3340	return ret;
3341}
3342
3343/**
3344 * i40e_get_rss_hash_bits - Read RSS Hash bits from register
3345 * @nfc: pointer to user request
3346 * @i_setc: bits currently set
3347 *
3348 * Returns value of bits to be set per user request
3349 **/
3350static u64 i40e_get_rss_hash_bits(struct ethtool_rxnfc *nfc, u64 i_setc)
3351{
3352	u64 i_set = i_setc;
3353	u64 src_l3 = 0, dst_l3 = 0;
3354
3355	if (nfc->data & RXH_L4_B_0_1)
3356		i_set |= I40E_L4_SRC_MASK;
3357	else
3358		i_set &= ~I40E_L4_SRC_MASK;
3359	if (nfc->data & RXH_L4_B_2_3)
3360		i_set |= I40E_L4_DST_MASK;
3361	else
3362		i_set &= ~I40E_L4_DST_MASK;
3363
3364	if (nfc->flow_type == TCP_V6_FLOW || nfc->flow_type == UDP_V6_FLOW) {
3365		src_l3 = I40E_L3_V6_SRC_MASK;
3366		dst_l3 = I40E_L3_V6_DST_MASK;
3367	} else if (nfc->flow_type == TCP_V4_FLOW ||
3368		  nfc->flow_type == UDP_V4_FLOW) {
3369		src_l3 = I40E_L3_SRC_MASK;
3370		dst_l3 = I40E_L3_DST_MASK;
3371	} else {
3372		/* Any other flow type are not supported here */
3373		return i_set;
3374	}
3375
3376	if (nfc->data & RXH_IP_SRC)
3377		i_set |= src_l3;
3378	else
3379		i_set &= ~src_l3;
3380	if (nfc->data & RXH_IP_DST)
3381		i_set |= dst_l3;
3382	else
3383		i_set &= ~dst_l3;
3384
3385	return i_set;
3386}
3387
3388/**
3389 * i40e_set_rss_hash_opt - Enable/Disable flow types for RSS hash
3390 * @pf: pointer to the physical function struct
3391 * @nfc: ethtool rxnfc command
3392 *
3393 * Returns Success if the flow input set is supported.
3394 **/
3395static int i40e_set_rss_hash_opt(struct i40e_pf *pf, struct ethtool_rxnfc *nfc)
3396{
3397	struct i40e_hw *hw = &pf->hw;
3398	u64 hena = (u64)i40e_read_rx_ctl(hw, I40E_PFQF_HENA(0)) |
3399		   ((u64)i40e_read_rx_ctl(hw, I40E_PFQF_HENA(1)) << 32);
3400	u8 flow_pctype = 0;
3401	u64 i_set, i_setc;
3402
3403	if (pf->flags & I40E_FLAG_MFP_ENABLED) {
3404		dev_err(&pf->pdev->dev,
3405			"Change of RSS hash input set is not supported when MFP mode is enabled\n");
3406		return -EOPNOTSUPP;
3407	}
3408
3409	/* RSS does not support anything other than hashing
3410	 * to queues on src and dst IPs and ports
3411	 */
3412	if (nfc->data & ~(RXH_IP_SRC | RXH_IP_DST |
3413			  RXH_L4_B_0_1 | RXH_L4_B_2_3))
3414		return -EINVAL;
3415
 
 
 
 
 
3416	switch (nfc->flow_type) {
3417	case TCP_V4_FLOW:
3418		flow_pctype = I40E_FILTER_PCTYPE_NONF_IPV4_TCP;
3419		if (pf->hw_features & I40E_HW_MULTIPLE_TCP_UDP_RSS_PCTYPE)
3420			hena |=
3421			  BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_TCP_SYN_NO_ACK);
 
 
 
 
 
 
 
 
 
3422		break;
3423	case TCP_V6_FLOW:
3424		flow_pctype = I40E_FILTER_PCTYPE_NONF_IPV6_TCP;
3425		if (pf->hw_features & I40E_HW_MULTIPLE_TCP_UDP_RSS_PCTYPE)
3426			hena |=
3427			  BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_TCP_SYN_NO_ACK);
3428		if (pf->hw_features & I40E_HW_MULTIPLE_TCP_UDP_RSS_PCTYPE)
3429			hena |=
3430			  BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_TCP_SYN_NO_ACK);
 
 
 
 
 
 
3431		break;
3432	case UDP_V4_FLOW:
3433		flow_pctype = I40E_FILTER_PCTYPE_NONF_IPV4_UDP;
3434		if (pf->hw_features & I40E_HW_MULTIPLE_TCP_UDP_RSS_PCTYPE)
3435			hena |=
3436			  BIT_ULL(I40E_FILTER_PCTYPE_NONF_UNICAST_IPV4_UDP) |
3437			  BIT_ULL(I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV4_UDP);
 
 
 
3438
3439		hena |= BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV4);
 
 
 
 
 
3440		break;
3441	case UDP_V6_FLOW:
3442		flow_pctype = I40E_FILTER_PCTYPE_NONF_IPV6_UDP;
3443		if (pf->hw_features & I40E_HW_MULTIPLE_TCP_UDP_RSS_PCTYPE)
3444			hena |=
3445			  BIT_ULL(I40E_FILTER_PCTYPE_NONF_UNICAST_IPV6_UDP) |
3446			  BIT_ULL(I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV6_UDP);
 
 
 
3447
3448		hena |= BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV6);
 
 
 
 
 
3449		break;
3450	case AH_ESP_V4_FLOW:
3451	case AH_V4_FLOW:
3452	case ESP_V4_FLOW:
3453	case SCTP_V4_FLOW:
3454		if ((nfc->data & RXH_L4_B_0_1) ||
3455		    (nfc->data & RXH_L4_B_2_3))
3456			return -EINVAL;
3457		hena |= BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_OTHER);
3458		break;
3459	case AH_ESP_V6_FLOW:
3460	case AH_V6_FLOW:
3461	case ESP_V6_FLOW:
3462	case SCTP_V6_FLOW:
3463		if ((nfc->data & RXH_L4_B_0_1) ||
3464		    (nfc->data & RXH_L4_B_2_3))
3465			return -EINVAL;
3466		hena |= BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_OTHER);
3467		break;
3468	case IPV4_FLOW:
3469		hena |= BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_OTHER) |
3470			BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV4);
3471		break;
3472	case IPV6_FLOW:
3473		hena |= BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_OTHER) |
3474			BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV6);
3475		break;
3476	default:
3477		return -EINVAL;
3478	}
3479
3480	if (flow_pctype) {
3481		i_setc = (u64)i40e_read_rx_ctl(hw, I40E_GLQF_HASH_INSET(0,
3482					       flow_pctype)) |
3483			((u64)i40e_read_rx_ctl(hw, I40E_GLQF_HASH_INSET(1,
3484					       flow_pctype)) << 32);
3485		i_set = i40e_get_rss_hash_bits(nfc, i_setc);
3486		i40e_write_rx_ctl(hw, I40E_GLQF_HASH_INSET(0, flow_pctype),
3487				  (u32)i_set);
3488		i40e_write_rx_ctl(hw, I40E_GLQF_HASH_INSET(1, flow_pctype),
3489				  (u32)(i_set >> 32));
3490		hena |= BIT_ULL(flow_pctype);
3491	}
3492
3493	i40e_write_rx_ctl(hw, I40E_PFQF_HENA(0), (u32)hena);
3494	i40e_write_rx_ctl(hw, I40E_PFQF_HENA(1), (u32)(hena >> 32));
3495	i40e_flush(hw);
3496
 
 
 
3497	return 0;
3498}
3499
3500/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3501 * i40e_update_ethtool_fdir_entry - Updates the fdir filter entry
3502 * @vsi: Pointer to the targeted VSI
3503 * @input: The filter to update or NULL to indicate deletion
3504 * @sw_idx: Software index to the filter
3505 * @cmd: The command to get or set Rx flow classification rules
3506 *
3507 * This function updates (or deletes) a Flow Director entry from
3508 * the hlist of the corresponding PF
3509 *
3510 * Returns 0 on success
3511 **/
3512static int i40e_update_ethtool_fdir_entry(struct i40e_vsi *vsi,
3513					  struct i40e_fdir_filter *input,
3514					  u16 sw_idx,
3515					  struct ethtool_rxnfc *cmd)
3516{
3517	struct i40e_fdir_filter *rule, *parent;
3518	struct i40e_pf *pf = vsi->back;
3519	struct hlist_node *node2;
3520	int err = -EINVAL;
3521
3522	parent = NULL;
3523	rule = NULL;
3524
3525	hlist_for_each_entry_safe(rule, node2,
3526				  &pf->fdir_filter_list, fdir_node) {
3527		/* hash found, or no matching entry */
3528		if (rule->fd_id >= sw_idx)
3529			break;
3530		parent = rule;
3531	}
3532
3533	/* if there is an old rule occupying our place remove it */
3534	if (rule && (rule->fd_id == sw_idx)) {
3535		/* Remove this rule, since we're either deleting it, or
3536		 * replacing it.
3537		 */
3538		err = i40e_add_del_fdir(vsi, rule, false);
3539		hlist_del(&rule->fdir_node);
3540		kfree(rule);
3541		pf->fdir_pf_active_filters--;
3542	}
3543
3544	/* If we weren't given an input, this is a delete, so just return the
3545	 * error code indicating if there was an entry at the requested slot
3546	 */
3547	if (!input)
3548		return err;
3549
3550	/* Otherwise, install the new rule as requested */
3551	INIT_HLIST_NODE(&input->fdir_node);
3552
3553	/* add filter to the list */
3554	if (parent)
3555		hlist_add_behind(&input->fdir_node, &parent->fdir_node);
3556	else
3557		hlist_add_head(&input->fdir_node,
3558			       &pf->fdir_filter_list);
3559
3560	/* update counts */
3561	pf->fdir_pf_active_filters++;
3562
3563	return 0;
3564}
3565
3566/**
3567 * i40e_prune_flex_pit_list - Cleanup unused entries in FLX_PIT table
3568 * @pf: pointer to PF structure
3569 *
3570 * This function searches the list of filters and determines which FLX_PIT
3571 * entries are still required. It will prune any entries which are no longer
3572 * in use after the deletion.
3573 **/
3574static void i40e_prune_flex_pit_list(struct i40e_pf *pf)
3575{
3576	struct i40e_flex_pit *entry, *tmp;
3577	struct i40e_fdir_filter *rule;
3578
3579	/* First, we'll check the l3 table */
3580	list_for_each_entry_safe(entry, tmp, &pf->l3_flex_pit_list, list) {
3581		bool found = false;
3582
3583		hlist_for_each_entry(rule, &pf->fdir_filter_list, fdir_node) {
3584			if (rule->flow_type != IP_USER_FLOW)
3585				continue;
3586			if (rule->flex_filter &&
3587			    rule->flex_offset == entry->src_offset) {
3588				found = true;
3589				break;
3590			}
3591		}
3592
3593		/* If we didn't find the filter, then we can prune this entry
3594		 * from the list.
3595		 */
3596		if (!found) {
3597			list_del(&entry->list);
3598			kfree(entry);
3599		}
3600	}
3601
3602	/* Followed by the L4 table */
3603	list_for_each_entry_safe(entry, tmp, &pf->l4_flex_pit_list, list) {
3604		bool found = false;
3605
3606		hlist_for_each_entry(rule, &pf->fdir_filter_list, fdir_node) {
3607			/* Skip this filter if it's L3, since we already
3608			 * checked those in the above loop
3609			 */
3610			if (rule->flow_type == IP_USER_FLOW)
3611				continue;
3612			if (rule->flex_filter &&
3613			    rule->flex_offset == entry->src_offset) {
3614				found = true;
3615				break;
3616			}
3617		}
3618
3619		/* If we didn't find the filter, then we can prune this entry
3620		 * from the list.
3621		 */
3622		if (!found) {
3623			list_del(&entry->list);
3624			kfree(entry);
3625		}
3626	}
3627}
3628
3629/**
3630 * i40e_del_fdir_entry - Deletes a Flow Director filter entry
3631 * @vsi: Pointer to the targeted VSI
3632 * @cmd: The command to get or set Rx flow classification rules
3633 *
3634 * The function removes a Flow Director filter entry from the
3635 * hlist of the corresponding PF
3636 *
3637 * Returns 0 on success
3638 */
3639static int i40e_del_fdir_entry(struct i40e_vsi *vsi,
3640			       struct ethtool_rxnfc *cmd)
3641{
3642	struct ethtool_rx_flow_spec *fsp =
3643		(struct ethtool_rx_flow_spec *)&cmd->fs;
3644	struct i40e_pf *pf = vsi->back;
3645	int ret = 0;
3646
3647	if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) ||
3648	    test_bit(__I40E_RESET_INTR_RECEIVED, pf->state))
3649		return -EBUSY;
3650
3651	if (test_bit(__I40E_FD_FLUSH_REQUESTED, pf->state))
3652		return -EBUSY;
3653
3654	ret = i40e_update_ethtool_fdir_entry(vsi, NULL, fsp->location, cmd);
3655
3656	i40e_prune_flex_pit_list(pf);
3657
3658	i40e_fdir_check_and_reenable(pf);
3659	return ret;
3660}
3661
3662/**
3663 * i40e_unused_pit_index - Find an unused PIT index for given list
3664 * @pf: the PF data structure
3665 *
3666 * Find the first unused flexible PIT index entry. We search both the L3 and
3667 * L4 flexible PIT lists so that the returned index is unique and unused by
3668 * either currently programmed L3 or L4 filters. We use a bit field as storage
3669 * to track which indexes are already used.
3670 **/
3671static u8 i40e_unused_pit_index(struct i40e_pf *pf)
3672{
3673	unsigned long available_index = 0xFF;
3674	struct i40e_flex_pit *entry;
3675
3676	/* We need to make sure that the new index isn't in use by either L3
3677	 * or L4 filters so that IP_USER_FLOW filters can program both L3 and
3678	 * L4 to use the same index.
3679	 */
3680
3681	list_for_each_entry(entry, &pf->l4_flex_pit_list, list)
3682		clear_bit(entry->pit_index, &available_index);
3683
3684	list_for_each_entry(entry, &pf->l3_flex_pit_list, list)
3685		clear_bit(entry->pit_index, &available_index);
3686
3687	return find_first_bit(&available_index, 8);
3688}
3689
3690/**
3691 * i40e_find_flex_offset - Find an existing flex src_offset
3692 * @flex_pit_list: L3 or L4 flex PIT list
3693 * @src_offset: new src_offset to find
3694 *
3695 * Searches the flex_pit_list for an existing offset. If no offset is
3696 * currently programmed, then this will return an ERR_PTR if there is no space
3697 * to add a new offset, otherwise it returns NULL.
3698 **/
3699static
3700struct i40e_flex_pit *i40e_find_flex_offset(struct list_head *flex_pit_list,
3701					    u16 src_offset)
3702{
3703	struct i40e_flex_pit *entry;
3704	int size = 0;
3705
3706	/* Search for the src_offset first. If we find a matching entry
3707	 * already programmed, we can simply re-use it.
3708	 */
3709	list_for_each_entry(entry, flex_pit_list, list) {
3710		size++;
3711		if (entry->src_offset == src_offset)
3712			return entry;
3713	}
3714
3715	/* If we haven't found an entry yet, then the provided src offset has
3716	 * not yet been programmed. We will program the src offset later on,
3717	 * but we need to indicate whether there is enough space to do so
3718	 * here. We'll make use of ERR_PTR for this purpose.
3719	 */
3720	if (size >= I40E_FLEX_PIT_TABLE_SIZE)
3721		return ERR_PTR(-ENOSPC);
3722
3723	return NULL;
3724}
3725
3726/**
3727 * i40e_add_flex_offset - Add src_offset to flex PIT table list
3728 * @flex_pit_list: L3 or L4 flex PIT list
3729 * @src_offset: new src_offset to add
3730 * @pit_index: the PIT index to program
3731 *
3732 * This function programs the new src_offset to the list. It is expected that
3733 * i40e_find_flex_offset has already been tried and returned NULL, indicating
3734 * that this offset is not programmed, and that the list has enough space to
3735 * store another offset.
3736 *
3737 * Returns 0 on success, and negative value on error.
3738 **/
3739static int i40e_add_flex_offset(struct list_head *flex_pit_list,
3740				u16 src_offset,
3741				u8 pit_index)
3742{
3743	struct i40e_flex_pit *new_pit, *entry;
3744
3745	new_pit = kzalloc(sizeof(*entry), GFP_KERNEL);
3746	if (!new_pit)
3747		return -ENOMEM;
3748
3749	new_pit->src_offset = src_offset;
3750	new_pit->pit_index = pit_index;
3751
3752	/* We need to insert this item such that the list is sorted by
3753	 * src_offset in ascending order.
3754	 */
3755	list_for_each_entry(entry, flex_pit_list, list) {
3756		if (new_pit->src_offset < entry->src_offset) {
3757			list_add_tail(&new_pit->list, &entry->list);
3758			return 0;
3759		}
3760
3761		/* If we found an entry with our offset already programmed we
3762		 * can simply return here, after freeing the memory. However,
3763		 * if the pit_index does not match we need to report an error.
3764		 */
3765		if (new_pit->src_offset == entry->src_offset) {
3766			int err = 0;
3767
3768			/* If the PIT index is not the same we can't re-use
3769			 * the entry, so we must report an error.
3770			 */
3771			if (new_pit->pit_index != entry->pit_index)
3772				err = -EINVAL;
3773
3774			kfree(new_pit);
3775			return err;
3776		}
3777	}
3778
3779	/* If we reached here, then we haven't yet added the item. This means
3780	 * that we should add the item at the end of the list.
3781	 */
3782	list_add_tail(&new_pit->list, flex_pit_list);
3783	return 0;
3784}
3785
3786/**
3787 * __i40e_reprogram_flex_pit - Re-program specific FLX_PIT table
3788 * @pf: Pointer to the PF structure
3789 * @flex_pit_list: list of flexible src offsets in use
3790 * @flex_pit_start: index to first entry for this section of the table
3791 *
3792 * In order to handle flexible data, the hardware uses a table of values
3793 * called the FLX_PIT table. This table is used to indicate which sections of
3794 * the input correspond to what PIT index values. Unfortunately, hardware is
3795 * very restrictive about programming this table. Entries must be ordered by
3796 * src_offset in ascending order, without duplicates. Additionally, unused
3797 * entries must be set to the unused index value, and must have valid size and
3798 * length according to the src_offset ordering.
3799 *
3800 * This function will reprogram the FLX_PIT register from a book-keeping
3801 * structure that we guarantee is already ordered correctly, and has no more
3802 * than 3 entries.
3803 *
3804 * To make things easier, we only support flexible values of one word length,
3805 * rather than allowing variable length flexible values.
3806 **/
3807static void __i40e_reprogram_flex_pit(struct i40e_pf *pf,
3808				      struct list_head *flex_pit_list,
3809				      int flex_pit_start)
3810{
3811	struct i40e_flex_pit *entry = NULL;
3812	u16 last_offset = 0;
3813	int i = 0, j = 0;
3814
3815	/* First, loop over the list of flex PIT entries, and reprogram the
3816	 * registers.
3817	 */
3818	list_for_each_entry(entry, flex_pit_list, list) {
3819		/* We have to be careful when programming values for the
3820		 * largest SRC_OFFSET value. It is possible that adding
3821		 * additional empty values at the end would overflow the space
3822		 * for the SRC_OFFSET in the FLX_PIT register. To avoid this,
3823		 * we check here and add the empty values prior to adding the
3824		 * largest value.
3825		 *
3826		 * To determine this, we will use a loop from i+1 to 3, which
3827		 * will determine whether the unused entries would have valid
3828		 * SRC_OFFSET. Note that there cannot be extra entries past
3829		 * this value, because the only valid values would have been
3830		 * larger than I40E_MAX_FLEX_SRC_OFFSET, and thus would not
3831		 * have been added to the list in the first place.
3832		 */
3833		for (j = i + 1; j < 3; j++) {
3834			u16 offset = entry->src_offset + j;
3835			int index = flex_pit_start + i;
3836			u32 value = I40E_FLEX_PREP_VAL(I40E_FLEX_DEST_UNUSED,
3837						       1,
3838						       offset - 3);
3839
3840			if (offset > I40E_MAX_FLEX_SRC_OFFSET) {
3841				i40e_write_rx_ctl(&pf->hw,
3842						  I40E_PRTQF_FLX_PIT(index),
3843						  value);
3844				i++;
3845			}
3846		}
3847
3848		/* Now, we can program the actual value into the table */
3849		i40e_write_rx_ctl(&pf->hw,
3850				  I40E_PRTQF_FLX_PIT(flex_pit_start + i),
3851				  I40E_FLEX_PREP_VAL(entry->pit_index + 50,
3852						     1,
3853						     entry->src_offset));
3854		i++;
3855	}
3856
3857	/* In order to program the last entries in the table, we need to
3858	 * determine the valid offset. If the list is empty, we'll just start
3859	 * with 0. Otherwise, we'll start with the last item offset and add 1.
3860	 * This ensures that all entries have valid sizes. If we don't do this
3861	 * correctly, the hardware will disable flexible field parsing.
3862	 */
3863	if (!list_empty(flex_pit_list))
3864		last_offset = list_prev_entry(entry, list)->src_offset + 1;
3865
3866	for (; i < 3; i++, last_offset++) {
3867		i40e_write_rx_ctl(&pf->hw,
3868				  I40E_PRTQF_FLX_PIT(flex_pit_start + i),
3869				  I40E_FLEX_PREP_VAL(I40E_FLEX_DEST_UNUSED,
3870						     1,
3871						     last_offset));
3872	}
3873}
3874
3875/**
3876 * i40e_reprogram_flex_pit - Reprogram all FLX_PIT tables after input set change
3877 * @pf: pointer to the PF structure
3878 *
3879 * This function reprograms both the L3 and L4 FLX_PIT tables. See the
3880 * internal helper function for implementation details.
3881 **/
3882static void i40e_reprogram_flex_pit(struct i40e_pf *pf)
3883{
3884	__i40e_reprogram_flex_pit(pf, &pf->l3_flex_pit_list,
3885				  I40E_FLEX_PIT_IDX_START_L3);
3886
3887	__i40e_reprogram_flex_pit(pf, &pf->l4_flex_pit_list,
3888				  I40E_FLEX_PIT_IDX_START_L4);
3889
3890	/* We also need to program the L3 and L4 GLQF ORT register */
3891	i40e_write_rx_ctl(&pf->hw,
3892			  I40E_GLQF_ORT(I40E_L3_GLQF_ORT_IDX),
3893			  I40E_ORT_PREP_VAL(I40E_FLEX_PIT_IDX_START_L3,
3894					    3, 1));
3895
3896	i40e_write_rx_ctl(&pf->hw,
3897			  I40E_GLQF_ORT(I40E_L4_GLQF_ORT_IDX),
3898			  I40E_ORT_PREP_VAL(I40E_FLEX_PIT_IDX_START_L4,
3899					    3, 1));
3900}
3901
3902/**
3903 * i40e_flow_str - Converts a flow_type into a human readable string
3904 * @fsp: the flow specification
3905 *
3906 * Currently only flow types we support are included here, and the string
3907 * value attempts to match what ethtool would use to configure this flow type.
3908 **/
3909static const char *i40e_flow_str(struct ethtool_rx_flow_spec *fsp)
3910{
3911	switch (fsp->flow_type & ~FLOW_EXT) {
3912	case TCP_V4_FLOW:
3913		return "tcp4";
3914	case UDP_V4_FLOW:
3915		return "udp4";
3916	case SCTP_V4_FLOW:
3917		return "sctp4";
3918	case IP_USER_FLOW:
3919		return "ip4";
3920	default:
3921		return "unknown";
3922	}
3923}
3924
3925/**
3926 * i40e_pit_index_to_mask - Return the FLEX mask for a given PIT index
3927 * @pit_index: PIT index to convert
3928 *
3929 * Returns the mask for a given PIT index. Will return 0 if the pit_index is
3930 * of range.
3931 **/
3932static u64 i40e_pit_index_to_mask(int pit_index)
3933{
3934	switch (pit_index) {
3935	case 0:
3936		return I40E_FLEX_50_MASK;
3937	case 1:
3938		return I40E_FLEX_51_MASK;
3939	case 2:
3940		return I40E_FLEX_52_MASK;
3941	case 3:
3942		return I40E_FLEX_53_MASK;
3943	case 4:
3944		return I40E_FLEX_54_MASK;
3945	case 5:
3946		return I40E_FLEX_55_MASK;
3947	case 6:
3948		return I40E_FLEX_56_MASK;
3949	case 7:
3950		return I40E_FLEX_57_MASK;
3951	default:
3952		return 0;
3953	}
3954}
3955
3956/**
3957 * i40e_print_input_set - Show changes between two input sets
3958 * @vsi: the vsi being configured
3959 * @old: the old input set
3960 * @new: the new input set
3961 *
3962 * Print the difference between old and new input sets by showing which series
3963 * of words are toggled on or off. Only displays the bits we actually support
3964 * changing.
3965 **/
3966static void i40e_print_input_set(struct i40e_vsi *vsi, u64 old, u64 new)
3967{
3968	struct i40e_pf *pf = vsi->back;
3969	bool old_value, new_value;
3970	int i;
3971
3972	old_value = !!(old & I40E_L3_SRC_MASK);
3973	new_value = !!(new & I40E_L3_SRC_MASK);
3974	if (old_value != new_value)
3975		netif_info(pf, drv, vsi->netdev, "L3 source address: %s -> %s\n",
3976			   old_value ? "ON" : "OFF",
3977			   new_value ? "ON" : "OFF");
3978
3979	old_value = !!(old & I40E_L3_DST_MASK);
3980	new_value = !!(new & I40E_L3_DST_MASK);
3981	if (old_value != new_value)
3982		netif_info(pf, drv, vsi->netdev, "L3 destination address: %s -> %s\n",
3983			   old_value ? "ON" : "OFF",
3984			   new_value ? "ON" : "OFF");
3985
3986	old_value = !!(old & I40E_L4_SRC_MASK);
3987	new_value = !!(new & I40E_L4_SRC_MASK);
3988	if (old_value != new_value)
3989		netif_info(pf, drv, vsi->netdev, "L4 source port: %s -> %s\n",
3990			   old_value ? "ON" : "OFF",
3991			   new_value ? "ON" : "OFF");
3992
3993	old_value = !!(old & I40E_L4_DST_MASK);
3994	new_value = !!(new & I40E_L4_DST_MASK);
3995	if (old_value != new_value)
3996		netif_info(pf, drv, vsi->netdev, "L4 destination port: %s -> %s\n",
3997			   old_value ? "ON" : "OFF",
3998			   new_value ? "ON" : "OFF");
3999
4000	old_value = !!(old & I40E_VERIFY_TAG_MASK);
4001	new_value = !!(new & I40E_VERIFY_TAG_MASK);
4002	if (old_value != new_value)
4003		netif_info(pf, drv, vsi->netdev, "SCTP verification tag: %s -> %s\n",
4004			   old_value ? "ON" : "OFF",
4005			   new_value ? "ON" : "OFF");
4006
4007	/* Show change of flexible filter entries */
4008	for (i = 0; i < I40E_FLEX_INDEX_ENTRIES; i++) {
4009		u64 flex_mask = i40e_pit_index_to_mask(i);
4010
4011		old_value = !!(old & flex_mask);
4012		new_value = !!(new & flex_mask);
4013		if (old_value != new_value)
4014			netif_info(pf, drv, vsi->netdev, "FLEX index %d: %s -> %s\n",
4015				   i,
4016				   old_value ? "ON" : "OFF",
4017				   new_value ? "ON" : "OFF");
4018	}
4019
4020	netif_info(pf, drv, vsi->netdev, "  Current input set: %0llx\n",
4021		   old);
4022	netif_info(pf, drv, vsi->netdev, "Requested input set: %0llx\n",
4023		   new);
4024}
4025
4026/**
4027 * i40e_check_fdir_input_set - Check that a given rx_flow_spec mask is valid
4028 * @vsi: pointer to the targeted VSI
4029 * @fsp: pointer to Rx flow specification
4030 * @userdef: userdefined data from flow specification
4031 *
4032 * Ensures that a given ethtool_rx_flow_spec has a valid mask. Some support
4033 * for partial matches exists with a few limitations. First, hardware only
4034 * supports masking by word boundary (2 bytes) and not per individual bit.
4035 * Second, hardware is limited to using one mask for a flow type and cannot
4036 * use a separate mask for each filter.
4037 *
4038 * To support these limitations, if we already have a configured filter for
4039 * the specified type, this function enforces that new filters of the type
4040 * match the configured input set. Otherwise, if we do not have a filter of
4041 * the specified type, we allow the input set to be updated to match the
4042 * desired filter.
4043 *
4044 * To help ensure that administrators understand why filters weren't displayed
4045 * as supported, we print a diagnostic message displaying how the input set
4046 * would change and warning to delete the preexisting filters if required.
4047 *
4048 * Returns 0 on successful input set match, and a negative return code on
4049 * failure.
4050 **/
4051static int i40e_check_fdir_input_set(struct i40e_vsi *vsi,
4052				     struct ethtool_rx_flow_spec *fsp,
4053				     struct i40e_rx_flow_userdef *userdef)
4054{
4055	struct i40e_pf *pf = vsi->back;
4056	struct ethtool_tcpip4_spec *tcp_ip4_spec;
4057	struct ethtool_usrip4_spec *usr_ip4_spec;
4058	u64 current_mask, new_mask;
4059	bool new_flex_offset = false;
4060	bool flex_l3 = false;
4061	u16 *fdir_filter_count;
4062	u16 index, src_offset = 0;
4063	u8 pit_index = 0;
4064	int err;
4065
4066	switch (fsp->flow_type & ~FLOW_EXT) {
4067	case SCTP_V4_FLOW:
4068		index = I40E_FILTER_PCTYPE_NONF_IPV4_SCTP;
4069		fdir_filter_count = &pf->fd_sctp4_filter_cnt;
4070		break;
4071	case TCP_V4_FLOW:
4072		index = I40E_FILTER_PCTYPE_NONF_IPV4_TCP;
4073		fdir_filter_count = &pf->fd_tcp4_filter_cnt;
4074		break;
4075	case UDP_V4_FLOW:
4076		index = I40E_FILTER_PCTYPE_NONF_IPV4_UDP;
4077		fdir_filter_count = &pf->fd_udp4_filter_cnt;
4078		break;
4079	case IP_USER_FLOW:
4080		index = I40E_FILTER_PCTYPE_NONF_IPV4_OTHER;
4081		fdir_filter_count = &pf->fd_ip4_filter_cnt;
4082		flex_l3 = true;
4083		break;
4084	default:
4085		return -EOPNOTSUPP;
4086	}
4087
4088	/* Read the current input set from register memory. */
4089	current_mask = i40e_read_fd_input_set(pf, index);
4090	new_mask = current_mask;
4091
4092	/* Determine, if any, the required changes to the input set in order
4093	 * to support the provided mask.
4094	 *
4095	 * Hardware only supports masking at word (2 byte) granularity and does
4096	 * not support full bitwise masking. This implementation simplifies
4097	 * even further and only supports fully enabled or fully disabled
4098	 * masks for each field, even though we could split the ip4src and
4099	 * ip4dst fields.
4100	 */
4101	switch (fsp->flow_type & ~FLOW_EXT) {
4102	case SCTP_V4_FLOW:
4103		new_mask &= ~I40E_VERIFY_TAG_MASK;
4104		/* Fall through */
4105	case TCP_V4_FLOW:
4106	case UDP_V4_FLOW:
4107		tcp_ip4_spec = &fsp->m_u.tcp_ip4_spec;
4108
4109		/* IPv4 source address */
4110		if (tcp_ip4_spec->ip4src == htonl(0xFFFFFFFF))
4111			new_mask |= I40E_L3_SRC_MASK;
4112		else if (!tcp_ip4_spec->ip4src)
4113			new_mask &= ~I40E_L3_SRC_MASK;
4114		else
4115			return -EOPNOTSUPP;
4116
4117		/* IPv4 destination address */
4118		if (tcp_ip4_spec->ip4dst == htonl(0xFFFFFFFF))
4119			new_mask |= I40E_L3_DST_MASK;
4120		else if (!tcp_ip4_spec->ip4dst)
4121			new_mask &= ~I40E_L3_DST_MASK;
4122		else
4123			return -EOPNOTSUPP;
4124
4125		/* L4 source port */
4126		if (tcp_ip4_spec->psrc == htons(0xFFFF))
4127			new_mask |= I40E_L4_SRC_MASK;
4128		else if (!tcp_ip4_spec->psrc)
4129			new_mask &= ~I40E_L4_SRC_MASK;
4130		else
4131			return -EOPNOTSUPP;
4132
4133		/* L4 destination port */
4134		if (tcp_ip4_spec->pdst == htons(0xFFFF))
4135			new_mask |= I40E_L4_DST_MASK;
4136		else if (!tcp_ip4_spec->pdst)
4137			new_mask &= ~I40E_L4_DST_MASK;
4138		else
4139			return -EOPNOTSUPP;
4140
4141		/* Filtering on Type of Service is not supported. */
4142		if (tcp_ip4_spec->tos)
4143			return -EOPNOTSUPP;
4144
4145		break;
4146	case IP_USER_FLOW:
4147		usr_ip4_spec = &fsp->m_u.usr_ip4_spec;
4148
4149		/* IPv4 source address */
4150		if (usr_ip4_spec->ip4src == htonl(0xFFFFFFFF))
4151			new_mask |= I40E_L3_SRC_MASK;
4152		else if (!usr_ip4_spec->ip4src)
4153			new_mask &= ~I40E_L3_SRC_MASK;
4154		else
4155			return -EOPNOTSUPP;
4156
4157		/* IPv4 destination address */
4158		if (usr_ip4_spec->ip4dst == htonl(0xFFFFFFFF))
4159			new_mask |= I40E_L3_DST_MASK;
4160		else if (!usr_ip4_spec->ip4dst)
4161			new_mask &= ~I40E_L3_DST_MASK;
4162		else
4163			return -EOPNOTSUPP;
4164
4165		/* First 4 bytes of L4 header */
4166		if (usr_ip4_spec->l4_4_bytes == htonl(0xFFFFFFFF))
4167			new_mask |= I40E_L4_SRC_MASK | I40E_L4_DST_MASK;
4168		else if (!usr_ip4_spec->l4_4_bytes)
4169			new_mask &= ~(I40E_L4_SRC_MASK | I40E_L4_DST_MASK);
4170		else
4171			return -EOPNOTSUPP;
4172
4173		/* Filtering on Type of Service is not supported. */
4174		if (usr_ip4_spec->tos)
4175			return -EOPNOTSUPP;
4176
4177		/* Filtering on IP version is not supported */
4178		if (usr_ip4_spec->ip_ver)
4179			return -EINVAL;
4180
4181		/* Filtering on L4 protocol is not supported */
4182		if (usr_ip4_spec->proto)
4183			return -EINVAL;
4184
4185		break;
4186	default:
4187		return -EOPNOTSUPP;
4188	}
4189
4190	/* First, clear all flexible filter entries */
4191	new_mask &= ~I40E_FLEX_INPUT_MASK;
4192
4193	/* If we have a flexible filter, try to add this offset to the correct
4194	 * flexible filter PIT list. Once finished, we can update the mask.
4195	 * If the src_offset changed, we will get a new mask value which will
4196	 * trigger an input set change.
4197	 */
4198	if (userdef->flex_filter) {
4199		struct i40e_flex_pit *l3_flex_pit = NULL, *flex_pit = NULL;
4200
4201		/* Flexible offset must be even, since the flexible payload
4202		 * must be aligned on 2-byte boundary.
4203		 */
4204		if (userdef->flex_offset & 0x1) {
4205			dev_warn(&pf->pdev->dev,
4206				 "Flexible data offset must be 2-byte aligned\n");
4207			return -EINVAL;
4208		}
4209
4210		src_offset = userdef->flex_offset >> 1;
4211
4212		/* FLX_PIT source offset value is only so large */
4213		if (src_offset > I40E_MAX_FLEX_SRC_OFFSET) {
4214			dev_warn(&pf->pdev->dev,
4215				 "Flexible data must reside within first 64 bytes of the packet payload\n");
4216			return -EINVAL;
4217		}
4218
4219		/* See if this offset has already been programmed. If we get
4220		 * an ERR_PTR, then the filter is not safe to add. Otherwise,
4221		 * if we get a NULL pointer, this means we will need to add
4222		 * the offset.
4223		 */
4224		flex_pit = i40e_find_flex_offset(&pf->l4_flex_pit_list,
4225						 src_offset);
4226		if (IS_ERR(flex_pit))
4227			return PTR_ERR(flex_pit);
4228
4229		/* IP_USER_FLOW filters match both L4 (ICMP) and L3 (unknown)
4230		 * packet types, and thus we need to program both L3 and L4
4231		 * flexible values. These must have identical flexible index,
4232		 * as otherwise we can't correctly program the input set. So
4233		 * we'll find both an L3 and L4 index and make sure they are
4234		 * the same.
4235		 */
4236		if (flex_l3) {
4237			l3_flex_pit =
4238				i40e_find_flex_offset(&pf->l3_flex_pit_list,
4239						      src_offset);
4240			if (IS_ERR(l3_flex_pit))
4241				return PTR_ERR(l3_flex_pit);
4242
4243			if (flex_pit) {
4244				/* If we already had a matching L4 entry, we
4245				 * need to make sure that the L3 entry we
4246				 * obtained uses the same index.
4247				 */
4248				if (l3_flex_pit) {
4249					if (l3_flex_pit->pit_index !=
4250					    flex_pit->pit_index) {
4251						return -EINVAL;
4252					}
4253				} else {
4254					new_flex_offset = true;
4255				}
4256			} else {
4257				flex_pit = l3_flex_pit;
4258			}
4259		}
4260
4261		/* If we didn't find an existing flex offset, we need to
4262		 * program a new one. However, we don't immediately program it
4263		 * here because we will wait to program until after we check
4264		 * that it is safe to change the input set.
4265		 */
4266		if (!flex_pit) {
4267			new_flex_offset = true;
4268			pit_index = i40e_unused_pit_index(pf);
4269		} else {
4270			pit_index = flex_pit->pit_index;
4271		}
4272
4273		/* Update the mask with the new offset */
4274		new_mask |= i40e_pit_index_to_mask(pit_index);
4275	}
4276
4277	/* If the mask and flexible filter offsets for this filter match the
4278	 * currently programmed values we don't need any input set change, so
4279	 * this filter is safe to install.
4280	 */
4281	if (new_mask == current_mask && !new_flex_offset)
4282		return 0;
4283
4284	netif_info(pf, drv, vsi->netdev, "Input set change requested for %s flows:\n",
4285		   i40e_flow_str(fsp));
4286	i40e_print_input_set(vsi, current_mask, new_mask);
4287	if (new_flex_offset) {
4288		netif_info(pf, drv, vsi->netdev, "FLEX index %d: Offset -> %d",
4289			   pit_index, src_offset);
4290	}
4291
4292	/* Hardware input sets are global across multiple ports, so even the
4293	 * main port cannot change them when in MFP mode as this would impact
4294	 * any filters on the other ports.
4295	 */
4296	if (pf->flags & I40E_FLAG_MFP_ENABLED) {
4297		netif_err(pf, drv, vsi->netdev, "Cannot change Flow Director input sets while MFP is enabled\n");
4298		return -EOPNOTSUPP;
4299	}
4300
4301	/* This filter requires us to update the input set. However, hardware
4302	 * only supports one input set per flow type, and does not support
4303	 * separate masks for each filter. This means that we can only support
4304	 * a single mask for all filters of a specific type.
4305	 *
4306	 * If we have preexisting filters, they obviously depend on the
4307	 * current programmed input set. Display a diagnostic message in this
4308	 * case explaining why the filter could not be accepted.
4309	 */
4310	if (*fdir_filter_count) {
4311		netif_err(pf, drv, vsi->netdev, "Cannot change input set for %s flows until %d preexisting filters are removed\n",
4312			  i40e_flow_str(fsp),
4313			  *fdir_filter_count);
4314		return -EOPNOTSUPP;
4315	}
4316
4317	i40e_write_fd_input_set(pf, index, new_mask);
4318
4319	/* IP_USER_FLOW filters match both IPv4/Other and IPv4/Fragmented
4320	 * frames. If we're programming the input set for IPv4/Other, we also
4321	 * need to program the IPv4/Fragmented input set. Since we don't have
4322	 * separate support, we'll always assume and enforce that the two flow
4323	 * types must have matching input sets.
4324	 */
4325	if (index == I40E_FILTER_PCTYPE_NONF_IPV4_OTHER)
4326		i40e_write_fd_input_set(pf, I40E_FILTER_PCTYPE_FRAG_IPV4,
4327					new_mask);
4328
4329	/* Add the new offset and update table, if necessary */
4330	if (new_flex_offset) {
4331		err = i40e_add_flex_offset(&pf->l4_flex_pit_list, src_offset,
4332					   pit_index);
4333		if (err)
4334			return err;
4335
4336		if (flex_l3) {
4337			err = i40e_add_flex_offset(&pf->l3_flex_pit_list,
4338						   src_offset,
4339						   pit_index);
4340			if (err)
4341				return err;
4342		}
4343
4344		i40e_reprogram_flex_pit(pf);
4345	}
4346
4347	return 0;
4348}
4349
4350/**
4351 * i40e_match_fdir_filter - Return true of two filters match
4352 * @a: pointer to filter struct
4353 * @b: pointer to filter struct
4354 *
4355 * Returns true if the two filters match exactly the same criteria. I.e. they
4356 * match the same flow type and have the same parameters. We don't need to
4357 * check any input-set since all filters of the same flow type must use the
4358 * same input set.
4359 **/
4360static bool i40e_match_fdir_filter(struct i40e_fdir_filter *a,
4361				   struct i40e_fdir_filter *b)
4362{
4363	/* The filters do not much if any of these criteria differ. */
4364	if (a->dst_ip != b->dst_ip ||
4365	    a->src_ip != b->src_ip ||
4366	    a->dst_port != b->dst_port ||
4367	    a->src_port != b->src_port ||
4368	    a->flow_type != b->flow_type ||
4369	    a->ip4_proto != b->ip4_proto)
4370		return false;
4371
4372	return true;
4373}
4374
4375/**
4376 * i40e_disallow_matching_filters - Check that new filters differ
4377 * @vsi: pointer to the targeted VSI
4378 * @input: new filter to check
4379 *
4380 * Due to hardware limitations, it is not possible for two filters that match
4381 * similar criteria to be programmed at the same time. This is true for a few
4382 * reasons:
4383 *
4384 * (a) all filters matching a particular flow type must use the same input
4385 * set, that is they must match the same criteria.
4386 * (b) different flow types will never match the same packet, as the flow type
4387 * is decided by hardware before checking which rules apply.
4388 * (c) hardware has no way to distinguish which order filters apply in.
4389 *
4390 * Due to this, we can't really support using the location data to order
4391 * filters in the hardware parsing. It is technically possible for the user to
4392 * request two filters matching the same criteria but which select different
4393 * queues. In this case, rather than keep both filters in the list, we reject
4394 * the 2nd filter when the user requests adding it.
4395 *
4396 * This avoids needing to track location for programming the filter to
4397 * hardware, and ensures that we avoid some strange scenarios involving
4398 * deleting filters which match the same criteria.
4399 **/
4400static int i40e_disallow_matching_filters(struct i40e_vsi *vsi,
4401					  struct i40e_fdir_filter *input)
4402{
4403	struct i40e_pf *pf = vsi->back;
4404	struct i40e_fdir_filter *rule;
4405	struct hlist_node *node2;
4406
4407	/* Loop through every filter, and check that it doesn't match */
4408	hlist_for_each_entry_safe(rule, node2,
4409				  &pf->fdir_filter_list, fdir_node) {
4410		/* Don't check the filters match if they share the same fd_id,
4411		 * since the new filter is actually just updating the target
4412		 * of the old filter.
4413		 */
4414		if (rule->fd_id == input->fd_id)
4415			continue;
4416
4417		/* If any filters match, then print a warning message to the
4418		 * kernel message buffer and bail out.
4419		 */
4420		if (i40e_match_fdir_filter(rule, input)) {
4421			dev_warn(&pf->pdev->dev,
4422				 "Existing user defined filter %d already matches this flow.\n",
4423				 rule->fd_id);
4424			return -EINVAL;
4425		}
4426	}
4427
4428	return 0;
4429}
4430
4431/**
4432 * i40e_add_fdir_ethtool - Add/Remove Flow Director filters
4433 * @vsi: pointer to the targeted VSI
4434 * @cmd: command to get or set RX flow classification rules
4435 *
4436 * Add Flow Director filters for a specific flow spec based on their
4437 * protocol.  Returns 0 if the filters were successfully added.
4438 **/
4439static int i40e_add_fdir_ethtool(struct i40e_vsi *vsi,
4440				 struct ethtool_rxnfc *cmd)
4441{
4442	struct i40e_rx_flow_userdef userdef;
4443	struct ethtool_rx_flow_spec *fsp;
4444	struct i40e_fdir_filter *input;
4445	u16 dest_vsi = 0, q_index = 0;
4446	struct i40e_pf *pf;
4447	int ret = -EINVAL;
4448	u8 dest_ctl;
4449
4450	if (!vsi)
4451		return -EINVAL;
 
4452	pf = vsi->back;
4453
4454	if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
4455		return -EOPNOTSUPP;
4456
4457	if (test_bit(__I40E_FD_SB_AUTO_DISABLED, pf->state))
4458		return -ENOSPC;
4459
4460	if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) ||
4461	    test_bit(__I40E_RESET_INTR_RECEIVED, pf->state))
4462		return -EBUSY;
4463
4464	if (test_bit(__I40E_FD_FLUSH_REQUESTED, pf->state))
4465		return -EBUSY;
4466
4467	fsp = (struct ethtool_rx_flow_spec *)&cmd->fs;
4468
4469	/* Parse the user-defined field */
4470	if (i40e_parse_rx_flow_user_data(fsp, &userdef))
4471		return -EINVAL;
4472
4473	/* Extended MAC field is not supported */
4474	if (fsp->flow_type & FLOW_MAC_EXT)
4475		return -EINVAL;
4476
4477	ret = i40e_check_fdir_input_set(vsi, fsp, &userdef);
4478	if (ret)
4479		return ret;
4480
4481	if (fsp->location >= (pf->hw.func_caps.fd_filters_best_effort +
4482			      pf->hw.func_caps.fd_filters_guaranteed)) {
4483		return -EINVAL;
4484	}
4485
4486	/* ring_cookie is either the drop index, or is a mask of the queue
4487	 * index and VF id we wish to target.
4488	 */
4489	if (fsp->ring_cookie == RX_CLS_FLOW_DISC) {
4490		dest_ctl = I40E_FILTER_PROGRAM_DESC_DEST_DROP_PACKET;
4491	} else {
4492		u32 ring = ethtool_get_flow_spec_ring(fsp->ring_cookie);
4493		u8 vf = ethtool_get_flow_spec_ring_vf(fsp->ring_cookie);
4494
4495		if (!vf) {
4496			if (ring >= vsi->num_queue_pairs)
4497				return -EINVAL;
4498			dest_vsi = vsi->id;
4499		} else {
4500			/* VFs are zero-indexed, so we subtract one here */
4501			vf--;
4502
4503			if (vf >= pf->num_alloc_vfs)
4504				return -EINVAL;
4505			if (ring >= pf->vf[vf].num_queue_pairs)
4506				return -EINVAL;
4507			dest_vsi = pf->vf[vf].lan_vsi_id;
4508		}
4509		dest_ctl = I40E_FILTER_PROGRAM_DESC_DEST_DIRECT_PACKET_QINDEX;
4510		q_index = ring;
4511	}
4512
4513	input = kzalloc(sizeof(*input), GFP_KERNEL);
4514
4515	if (!input)
4516		return -ENOMEM;
4517
4518	input->fd_id = fsp->location;
4519	input->q_index = q_index;
4520	input->dest_vsi = dest_vsi;
4521	input->dest_ctl = dest_ctl;
 
 
 
 
 
 
 
 
4522	input->fd_status = I40E_FILTER_PROGRAM_DESC_FD_STATUS_FD_ID;
4523	input->cnt_index  = I40E_FD_SB_STAT_IDX(pf->hw.pf_id);
4524	input->dst_ip = fsp->h_u.tcp_ip4_spec.ip4src;
4525	input->src_ip = fsp->h_u.tcp_ip4_spec.ip4dst;
4526	input->flow_type = fsp->flow_type & ~FLOW_EXT;
4527	input->ip4_proto = fsp->h_u.usr_ip4_spec.proto;
4528
4529	/* Reverse the src and dest notion, since the HW expects them to be from
4530	 * Tx perspective where as the input from user is from Rx filter view.
4531	 */
4532	input->dst_port = fsp->h_u.tcp_ip4_spec.psrc;
4533	input->src_port = fsp->h_u.tcp_ip4_spec.pdst;
4534	input->dst_ip = fsp->h_u.tcp_ip4_spec.ip4src;
4535	input->src_ip = fsp->h_u.tcp_ip4_spec.ip4dst;
4536
4537	if (userdef.flex_filter) {
4538		input->flex_filter = true;
4539		input->flex_word = cpu_to_be16(userdef.flex_word);
4540		input->flex_offset = userdef.flex_offset;
 
 
 
 
 
 
 
 
4541	}
4542
4543	/* Avoid programming two filters with identical match criteria. */
4544	ret = i40e_disallow_matching_filters(vsi, input);
4545	if (ret)
4546		goto free_filter_memory;
4547
4548	/* Add the input filter to the fdir_input_list, possibly replacing
4549	 * a previous filter. Do not free the input structure after adding it
4550	 * to the list as this would cause a use-after-free bug.
4551	 */
4552	i40e_update_ethtool_fdir_entry(vsi, input, fsp->location, NULL);
4553	ret = i40e_add_del_fdir(vsi, input, true);
 
4554	if (ret)
4555		goto remove_sw_rule;
4556	return 0;
 
4557
4558remove_sw_rule:
4559	hlist_del(&input->fdir_node);
4560	pf->fdir_pf_active_filters--;
4561free_filter_memory:
4562	kfree(input);
4563	return ret;
4564}
4565
4566/**
4567 * i40e_set_rxnfc - command to set RX flow classification rules
4568 * @netdev: network interface device structure
4569 * @cmd: ethtool rxnfc command
4570 *
4571 * Returns Success if the command is supported.
4572 **/
4573static int i40e_set_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd)
4574{
4575	struct i40e_netdev_priv *np = netdev_priv(netdev);
4576	struct i40e_vsi *vsi = np->vsi;
4577	struct i40e_pf *pf = vsi->back;
4578	int ret = -EOPNOTSUPP;
4579
4580	switch (cmd->cmd) {
4581	case ETHTOOL_SRXFH:
4582		ret = i40e_set_rss_hash_opt(pf, cmd);
4583		break;
4584	case ETHTOOL_SRXCLSRLINS:
4585		ret = i40e_add_fdir_ethtool(vsi, cmd);
4586		break;
4587	case ETHTOOL_SRXCLSRLDEL:
4588		ret = i40e_del_fdir_entry(vsi, cmd);
4589		break;
4590	default:
4591		break;
4592	}
4593
4594	return ret;
4595}
4596
4597/**
4598 * i40e_max_channels - get Max number of combined channels supported
4599 * @vsi: vsi pointer
4600 **/
4601static unsigned int i40e_max_channels(struct i40e_vsi *vsi)
4602{
4603	/* TODO: This code assumes DCB and FD is disabled for now. */
4604	return vsi->alloc_queue_pairs;
4605}
4606
4607/**
4608 * i40e_get_channels - Get the current channels enabled and max supported etc.
4609 * @dev: network interface device structure
4610 * @ch: ethtool channels structure
4611 *
4612 * We don't support separate tx and rx queues as channels. The other count
4613 * represents how many queues are being used for control. max_combined counts
4614 * how many queue pairs we can support. They may not be mapped 1 to 1 with
4615 * q_vectors since we support a lot more queue pairs than q_vectors.
4616 **/
4617static void i40e_get_channels(struct net_device *dev,
4618			      struct ethtool_channels *ch)
4619{
4620	struct i40e_netdev_priv *np = netdev_priv(dev);
4621	struct i40e_vsi *vsi = np->vsi;
4622	struct i40e_pf *pf = vsi->back;
4623
4624	/* report maximum channels */
4625	ch->max_combined = i40e_max_channels(vsi);
4626
4627	/* report info for other vector */
4628	ch->other_count = (pf->flags & I40E_FLAG_FD_SB_ENABLED) ? 1 : 0;
4629	ch->max_other = ch->other_count;
4630
4631	/* Note: This code assumes DCB is disabled for now. */
4632	ch->combined_count = vsi->num_queue_pairs;
4633}
4634
4635/**
4636 * i40e_set_channels - Set the new channels count.
4637 * @dev: network interface device structure
4638 * @ch: ethtool channels structure
4639 *
4640 * The new channels count may not be the same as requested by the user
4641 * since it gets rounded down to a power of 2 value.
4642 **/
4643static int i40e_set_channels(struct net_device *dev,
4644			     struct ethtool_channels *ch)
4645{
4646	const u8 drop = I40E_FILTER_PROGRAM_DESC_DEST_DROP_PACKET;
4647	struct i40e_netdev_priv *np = netdev_priv(dev);
4648	unsigned int count = ch->combined_count;
4649	struct i40e_vsi *vsi = np->vsi;
4650	struct i40e_pf *pf = vsi->back;
4651	struct i40e_fdir_filter *rule;
4652	struct hlist_node *node2;
4653	int new_count;
4654	int err = 0;
4655
4656	/* We do not support setting channels for any other VSI at present */
4657	if (vsi->type != I40E_VSI_MAIN)
4658		return -EINVAL;
4659
4660	/* We do not support setting channels via ethtool when TCs are
4661	 * configured through mqprio
4662	 */
4663	if (pf->flags & I40E_FLAG_TC_MQPRIO)
4664		return -EINVAL;
4665
4666	/* verify they are not requesting separate vectors */
4667	if (!count || ch->rx_count || ch->tx_count)
4668		return -EINVAL;
4669
4670	/* verify other_count has not changed */
4671	if (ch->other_count != ((pf->flags & I40E_FLAG_FD_SB_ENABLED) ? 1 : 0))
4672		return -EINVAL;
4673
4674	/* verify the number of channels does not exceed hardware limits */
4675	if (count > i40e_max_channels(vsi))
4676		return -EINVAL;
4677
4678	/* verify that the number of channels does not invalidate any current
4679	 * flow director rules
4680	 */
4681	hlist_for_each_entry_safe(rule, node2,
4682				  &pf->fdir_filter_list, fdir_node) {
4683		if (rule->dest_ctl != drop && count <= rule->q_index) {
4684			dev_warn(&pf->pdev->dev,
4685				 "Existing user defined filter %d assigns flow to queue %d\n",
4686				 rule->fd_id, rule->q_index);
4687			err = -EINVAL;
4688		}
4689	}
4690
4691	if (err) {
4692		dev_err(&pf->pdev->dev,
4693			"Existing filter rules must be deleted to reduce combined channel count to %d\n",
4694			count);
4695		return err;
4696	}
4697
4698	/* update feature limits from largest to smallest supported values */
4699	/* TODO: Flow director limit, DCB etc */
4700
4701	/* use rss_reconfig to rebuild with new queue count and update traffic
4702	 * class queue mapping
4703	 */
4704	new_count = i40e_reconfig_rss_queues(pf, count);
4705	if (new_count > 0)
4706		return 0;
4707	else
4708		return -EINVAL;
4709}
4710
4711/**
4712 * i40e_get_rxfh_key_size - get the RSS hash key size
4713 * @netdev: network interface device structure
4714 *
4715 * Returns the table size.
4716 **/
4717static u32 i40e_get_rxfh_key_size(struct net_device *netdev)
4718{
4719	return I40E_HKEY_ARRAY_SIZE;
4720}
4721
4722/**
4723 * i40e_get_rxfh_indir_size - get the rx flow hash indirection table size
4724 * @netdev: network interface device structure
4725 *
4726 * Returns the table size.
4727 **/
4728static u32 i40e_get_rxfh_indir_size(struct net_device *netdev)
4729{
4730	return I40E_HLUT_ARRAY_SIZE;
4731}
4732
4733/**
4734 * i40e_get_rxfh - get the rx flow hash indirection table
4735 * @netdev: network interface device structure
4736 * @indir: indirection table
4737 * @key: hash key
4738 * @hfunc: hash function
4739 *
4740 * Reads the indirection table directly from the hardware. Returns 0 on
4741 * success.
4742 **/
4743static int i40e_get_rxfh(struct net_device *netdev, u32 *indir, u8 *key,
4744			 u8 *hfunc)
4745{
4746	struct i40e_netdev_priv *np = netdev_priv(netdev);
4747	struct i40e_vsi *vsi = np->vsi;
4748	u8 *lut, *seed = NULL;
4749	int ret;
4750	u16 i;
4751
4752	if (hfunc)
4753		*hfunc = ETH_RSS_HASH_TOP;
4754
4755	if (!indir)
4756		return 0;
4757
4758	seed = key;
4759	lut = kzalloc(I40E_HLUT_ARRAY_SIZE, GFP_KERNEL);
4760	if (!lut)
4761		return -ENOMEM;
4762	ret = i40e_get_rss(vsi, seed, lut, I40E_HLUT_ARRAY_SIZE);
4763	if (ret)
4764		goto out;
4765	for (i = 0; i < I40E_HLUT_ARRAY_SIZE; i++)
4766		indir[i] = (u32)(lut[i]);
4767
4768out:
4769	kfree(lut);
4770
4771	return ret;
4772}
4773
4774/**
4775 * i40e_set_rxfh - set the rx flow hash indirection table
4776 * @netdev: network interface device structure
4777 * @indir: indirection table
4778 * @key: hash key
4779 * @hfunc: hash function to use
4780 *
4781 * Returns -EINVAL if the table specifies an invalid queue id, otherwise
4782 * returns 0 after programming the table.
4783 **/
4784static int i40e_set_rxfh(struct net_device *netdev, const u32 *indir,
4785			 const u8 *key, const u8 hfunc)
4786{
4787	struct i40e_netdev_priv *np = netdev_priv(netdev);
4788	struct i40e_vsi *vsi = np->vsi;
4789	struct i40e_pf *pf = vsi->back;
4790	u8 *seed = NULL;
4791	u16 i;
4792
4793	if (hfunc != ETH_RSS_HASH_NO_CHANGE && hfunc != ETH_RSS_HASH_TOP)
4794		return -EOPNOTSUPP;
4795
 
 
 
4796	if (key) {
4797		if (!vsi->rss_hkey_user) {
4798			vsi->rss_hkey_user = kzalloc(I40E_HKEY_ARRAY_SIZE,
4799						     GFP_KERNEL);
4800			if (!vsi->rss_hkey_user)
4801				return -ENOMEM;
4802		}
4803		memcpy(vsi->rss_hkey_user, key, I40E_HKEY_ARRAY_SIZE);
4804		seed = vsi->rss_hkey_user;
4805	}
4806	if (!vsi->rss_lut_user) {
4807		vsi->rss_lut_user = kzalloc(I40E_HLUT_ARRAY_SIZE, GFP_KERNEL);
4808		if (!vsi->rss_lut_user)
4809			return -ENOMEM;
4810	}
4811
4812	/* Each 32 bits pointed by 'indir' is stored with a lut entry */
4813	if (indir)
4814		for (i = 0; i < I40E_HLUT_ARRAY_SIZE; i++)
4815			vsi->rss_lut_user[i] = (u8)(indir[i]);
4816	else
4817		i40e_fill_rss_lut(pf, vsi->rss_lut_user, I40E_HLUT_ARRAY_SIZE,
4818				  vsi->rss_size);
4819
4820	return i40e_config_rss(vsi, seed, vsi->rss_lut_user,
4821			       I40E_HLUT_ARRAY_SIZE);
4822}
4823
4824/**
4825 * i40e_get_priv_flags - report device private flags
4826 * @dev: network interface device structure
4827 *
4828 * The get string set count and the string set should be matched for each
4829 * flag returned.  Add new strings for each flag to the i40e_gstrings_priv_flags
4830 * array.
4831 *
4832 * Returns a u32 bitmap of flags.
4833 **/
4834static u32 i40e_get_priv_flags(struct net_device *dev)
4835{
4836	struct i40e_netdev_priv *np = netdev_priv(dev);
4837	struct i40e_vsi *vsi = np->vsi;
4838	struct i40e_pf *pf = vsi->back;
4839	u32 i, j, ret_flags = 0;
4840
4841	for (i = 0; i < I40E_PRIV_FLAGS_STR_LEN; i++) {
4842		const struct i40e_priv_flags *priv_flags;
4843
4844		priv_flags = &i40e_gstrings_priv_flags[i];
4845
4846		if (priv_flags->flag & pf->flags)
4847			ret_flags |= BIT(i);
4848	}
4849
4850	if (pf->hw.pf_id != 0)
4851		return ret_flags;
4852
4853	for (j = 0; j < I40E_GL_PRIV_FLAGS_STR_LEN; j++) {
4854		const struct i40e_priv_flags *priv_flags;
4855
4856		priv_flags = &i40e_gl_gstrings_priv_flags[j];
4857
4858		if (priv_flags->flag & pf->flags)
4859			ret_flags |= BIT(i + j);
4860	}
4861
4862	return ret_flags;
4863}
4864
4865/**
4866 * i40e_set_priv_flags - set private flags
4867 * @dev: network interface device structure
4868 * @flags: bit flags to be set
4869 **/
4870static int i40e_set_priv_flags(struct net_device *dev, u32 flags)
4871{
4872	struct i40e_netdev_priv *np = netdev_priv(dev);
4873	u64 orig_flags, new_flags, changed_flags;
4874	enum i40e_admin_queue_err adq_err;
4875	struct i40e_vsi *vsi = np->vsi;
4876	struct i40e_pf *pf = vsi->back;
4877	bool is_reset_needed;
4878	i40e_status status;
4879	u32 i, j;
4880
4881	orig_flags = READ_ONCE(pf->flags);
4882	new_flags = orig_flags;
4883
4884	for (i = 0; i < I40E_PRIV_FLAGS_STR_LEN; i++) {
4885		const struct i40e_priv_flags *priv_flags;
4886
4887		priv_flags = &i40e_gstrings_priv_flags[i];
4888
4889		if (flags & BIT(i))
4890			new_flags |= priv_flags->flag;
4891		else
4892			new_flags &= ~(priv_flags->flag);
4893
4894		/* If this is a read-only flag, it can't be changed */
4895		if (priv_flags->read_only &&
4896		    ((orig_flags ^ new_flags) & ~BIT(i)))
4897			return -EOPNOTSUPP;
4898	}
4899
4900	if (pf->hw.pf_id != 0)
4901		goto flags_complete;
4902
4903	for (j = 0; j < I40E_GL_PRIV_FLAGS_STR_LEN; j++) {
4904		const struct i40e_priv_flags *priv_flags;
4905
4906		priv_flags = &i40e_gl_gstrings_priv_flags[j];
4907
4908		if (flags & BIT(i + j))
4909			new_flags |= priv_flags->flag;
4910		else
4911			new_flags &= ~(priv_flags->flag);
4912
4913		/* If this is a read-only flag, it can't be changed */
4914		if (priv_flags->read_only &&
4915		    ((orig_flags ^ new_flags) & ~BIT(i)))
4916			return -EOPNOTSUPP;
4917	}
4918
4919flags_complete:
4920	changed_flags = orig_flags ^ new_flags;
4921
4922	is_reset_needed = !!(changed_flags & (I40E_FLAG_VEB_STATS_ENABLED |
4923		I40E_FLAG_LEGACY_RX | I40E_FLAG_SOURCE_PRUNING_DISABLED |
4924		I40E_FLAG_DISABLE_FW_LLDP));
4925
4926	/* Before we finalize any flag changes, we need to perform some
4927	 * checks to ensure that the changes are supported and safe.
4928	 */
4929
4930	/* ATR eviction is not supported on all devices */
4931	if ((new_flags & I40E_FLAG_HW_ATR_EVICT_ENABLED) &&
4932	    !(pf->hw_features & I40E_HW_ATR_EVICT_CAPABLE))
4933		return -EOPNOTSUPP;
4934
4935	/* If the driver detected FW LLDP was disabled on init, this flag could
4936	 * be set, however we do not support _changing_ the flag:
4937	 * - on XL710 if NPAR is enabled or FW API version < 1.7
4938	 * - on X722 with FW API version < 1.6
4939	 * There are situations where older FW versions/NPAR enabled PFs could
4940	 * disable LLDP, however we _must_ not allow the user to enable/disable
4941	 * LLDP with this flag on unsupported FW versions.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
4942	 */
4943	if (changed_flags & I40E_FLAG_DISABLE_FW_LLDP) {
4944		if (!(pf->hw.flags & I40E_HW_FLAG_FW_LLDP_STOPPABLE)) {
4945			dev_warn(&pf->pdev->dev,
4946				 "Device does not support changing FW LLDP\n");
4947			return -EOPNOTSUPP;
4948		}
4949	}
4950
4951	if (((changed_flags & I40E_FLAG_RS_FEC) ||
4952	     (changed_flags & I40E_FLAG_BASE_R_FEC)) &&
4953	    pf->hw.device_id != I40E_DEV_ID_25G_SFP28 &&
4954	    pf->hw.device_id != I40E_DEV_ID_25G_B) {
4955		dev_warn(&pf->pdev->dev,
4956			 "Device does not support changing FEC configuration\n");
4957		return -EOPNOTSUPP;
4958	}
4959
4960	/* Process any additional changes needed as a result of flag changes.
4961	 * The changed_flags value reflects the list of bits that were
4962	 * changed in the code above.
4963	 */
4964
4965	/* Flush current ATR settings if ATR was disabled */
4966	if ((changed_flags & I40E_FLAG_FD_ATR_ENABLED) &&
4967	    !(new_flags & I40E_FLAG_FD_ATR_ENABLED)) {
4968		set_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state);
4969		set_bit(__I40E_FD_FLUSH_REQUESTED, pf->state);
4970	}
4971
4972	if (changed_flags & I40E_FLAG_TRUE_PROMISC_SUPPORT) {
4973		u16 sw_flags = 0, valid_flags = 0;
4974		int ret;
4975
4976		if (!(new_flags & I40E_FLAG_TRUE_PROMISC_SUPPORT))
4977			sw_flags = I40E_AQ_SET_SWITCH_CFG_PROMISC;
4978		valid_flags = I40E_AQ_SET_SWITCH_CFG_PROMISC;
4979		ret = i40e_aq_set_switch_config(&pf->hw, sw_flags, valid_flags,
4980						0, NULL);
4981		if (ret && pf->hw.aq.asq_last_status != I40E_AQ_RC_ESRCH) {
4982			dev_info(&pf->pdev->dev,
4983				 "couldn't set switch config bits, err %s aq_err %s\n",
4984				 i40e_stat_str(&pf->hw, ret),
4985				 i40e_aq_str(&pf->hw,
4986					     pf->hw.aq.asq_last_status));
4987			/* not a fatal problem, just keep going */
4988		}
4989	}
4990
4991	if ((changed_flags & I40E_FLAG_RS_FEC) ||
4992	    (changed_flags & I40E_FLAG_BASE_R_FEC)) {
4993		u8 fec_cfg = 0;
4994
4995		if (new_flags & I40E_FLAG_RS_FEC &&
4996		    new_flags & I40E_FLAG_BASE_R_FEC) {
4997			fec_cfg = I40E_AQ_SET_FEC_AUTO;
4998		} else if (new_flags & I40E_FLAG_RS_FEC) {
4999			fec_cfg = (I40E_AQ_SET_FEC_REQUEST_RS |
5000				   I40E_AQ_SET_FEC_ABILITY_RS);
5001		} else if (new_flags & I40E_FLAG_BASE_R_FEC) {
5002			fec_cfg = (I40E_AQ_SET_FEC_REQUEST_KR |
5003				   I40E_AQ_SET_FEC_ABILITY_KR);
5004		}
5005		if (i40e_set_fec_cfg(dev, fec_cfg))
5006			dev_warn(&pf->pdev->dev, "Cannot change FEC config\n");
5007	}
5008
5009	if ((changed_flags & new_flags &
5010	     I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED) &&
5011	    (new_flags & I40E_FLAG_MFP_ENABLED))
5012		dev_warn(&pf->pdev->dev,
5013			 "Turning on link-down-on-close flag may affect other partitions\n");
5014
5015	if (changed_flags & I40E_FLAG_DISABLE_FW_LLDP) {
5016		if (new_flags & I40E_FLAG_DISABLE_FW_LLDP) {
5017			struct i40e_dcbx_config *dcbcfg;
5018
5019			i40e_aq_stop_lldp(&pf->hw, true, false, NULL);
5020			i40e_aq_set_dcb_parameters(&pf->hw, true, NULL);
5021			/* reset local_dcbx_config to default */
5022			dcbcfg = &pf->hw.local_dcbx_config;
5023			dcbcfg->etscfg.willing = 1;
5024			dcbcfg->etscfg.maxtcs = 0;
5025			dcbcfg->etscfg.tcbwtable[0] = 100;
5026			for (i = 1; i < I40E_MAX_TRAFFIC_CLASS; i++)
5027				dcbcfg->etscfg.tcbwtable[i] = 0;
5028			for (i = 0; i < I40E_MAX_USER_PRIORITY; i++)
5029				dcbcfg->etscfg.prioritytable[i] = 0;
5030			dcbcfg->etscfg.tsatable[0] = I40E_IEEE_TSA_ETS;
5031			dcbcfg->pfc.willing = 1;
5032			dcbcfg->pfc.pfccap = I40E_MAX_TRAFFIC_CLASS;
5033		} else {
5034			status = i40e_aq_start_lldp(&pf->hw, false, NULL);
5035			if (status) {
5036				adq_err = pf->hw.aq.asq_last_status;
5037				switch (adq_err) {
5038				case I40E_AQ_RC_EEXIST:
5039					dev_warn(&pf->pdev->dev,
5040						 "FW LLDP agent is already running\n");
5041					is_reset_needed = false;
5042					break;
5043				case I40E_AQ_RC_EPERM:
5044					dev_warn(&pf->pdev->dev,
5045						 "Device configuration forbids SW from starting the LLDP agent.\n");
5046					return -EINVAL;
5047				default:
5048					dev_warn(&pf->pdev->dev,
5049						 "Starting FW LLDP agent failed: error: %s, %s\n",
5050						 i40e_stat_str(&pf->hw,
5051							       status),
5052						 i40e_aq_str(&pf->hw,
5053							     adq_err));
5054					return -EINVAL;
5055				}
5056			}
5057		}
5058	}
5059
5060	/* Now that we've checked to ensure that the new flags are valid, load
5061	 * them into place. Since we only modify flags either (a) during
5062	 * initialization or (b) while holding the RTNL lock, we don't need
5063	 * anything fancy here.
5064	 */
5065	pf->flags = new_flags;
5066
5067	/* Issue reset to cause things to take effect, as additional bits
5068	 * are added we will need to create a mask of bits requiring reset
5069	 */
5070	if (is_reset_needed)
5071		i40e_do_reset(pf, BIT(__I40E_PF_RESET_REQUESTED), true);
5072
5073	return 0;
5074}
5075
5076/**
5077 * i40e_get_module_info - get (Q)SFP+ module type info
5078 * @netdev: network interface device structure
5079 * @modinfo: module EEPROM size and layout information structure
5080 **/
5081static int i40e_get_module_info(struct net_device *netdev,
5082				struct ethtool_modinfo *modinfo)
5083{
5084	struct i40e_netdev_priv *np = netdev_priv(netdev);
5085	struct i40e_vsi *vsi = np->vsi;
5086	struct i40e_pf *pf = vsi->back;
5087	struct i40e_hw *hw = &pf->hw;
5088	u32 sff8472_comp = 0;
5089	u32 sff8472_swap = 0;
5090	u32 sff8636_rev = 0;
5091	i40e_status status;
5092	u32 type = 0;
5093
5094	/* Check if firmware supports reading module EEPROM. */
5095	if (!(hw->flags & I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE)) {
5096		netdev_err(vsi->netdev, "Module EEPROM memory read not supported. Please update the NVM image.\n");
5097		return -EINVAL;
5098	}
5099
5100	status = i40e_update_link_info(hw);
5101	if (status)
5102		return -EIO;
5103
5104	if (hw->phy.link_info.phy_type == I40E_PHY_TYPE_EMPTY) {
5105		netdev_err(vsi->netdev, "Cannot read module EEPROM memory. No module connected.\n");
5106		return -EINVAL;
 
5107	}
5108
5109	type = hw->phy.link_info.module_type[0];
5110
5111	switch (type) {
5112	case I40E_MODULE_TYPE_SFP:
5113		status = i40e_aq_get_phy_register(hw,
5114				I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE,
5115				I40E_I2C_EEPROM_DEV_ADDR,
5116				I40E_MODULE_SFF_8472_COMP,
5117				&sff8472_comp, NULL);
5118		if (status)
5119			return -EIO;
5120
5121		status = i40e_aq_get_phy_register(hw,
5122				I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE,
5123				I40E_I2C_EEPROM_DEV_ADDR,
5124				I40E_MODULE_SFF_8472_SWAP,
5125				&sff8472_swap, NULL);
5126		if (status)
5127			return -EIO;
5128
5129		/* Check if the module requires address swap to access
5130		 * the other EEPROM memory page.
5131		 */
5132		if (sff8472_swap & I40E_MODULE_SFF_ADDR_MODE) {
5133			netdev_warn(vsi->netdev, "Module address swap to access page 0xA2 is not supported.\n");
5134			modinfo->type = ETH_MODULE_SFF_8079;
5135			modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
5136		} else if (sff8472_comp == 0x00) {
5137			/* Module is not SFF-8472 compliant */
5138			modinfo->type = ETH_MODULE_SFF_8079;
5139			modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
5140		} else if (!(sff8472_swap & I40E_MODULE_SFF_DDM_IMPLEMENTED)) {
5141			/* Module is SFF-8472 compliant but doesn't implement
5142			 * Digital Diagnostic Monitoring (DDM).
5143			 */
5144			modinfo->type = ETH_MODULE_SFF_8079;
5145			modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
5146		} else {
5147			modinfo->type = ETH_MODULE_SFF_8472;
5148			modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
5149		}
5150		break;
5151	case I40E_MODULE_TYPE_QSFP_PLUS:
5152		/* Read from memory page 0. */
5153		status = i40e_aq_get_phy_register(hw,
5154				I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE,
5155				0,
5156				I40E_MODULE_REVISION_ADDR,
5157				&sff8636_rev, NULL);
5158		if (status)
5159			return -EIO;
5160		/* Determine revision compliance byte */
5161		if (sff8636_rev > 0x02) {
5162			/* Module is SFF-8636 compliant */
5163			modinfo->type = ETH_MODULE_SFF_8636;
5164			modinfo->eeprom_len = I40E_MODULE_QSFP_MAX_LEN;
5165		} else {
5166			modinfo->type = ETH_MODULE_SFF_8436;
5167			modinfo->eeprom_len = I40E_MODULE_QSFP_MAX_LEN;
5168		}
5169		break;
5170	case I40E_MODULE_TYPE_QSFP28:
5171		modinfo->type = ETH_MODULE_SFF_8636;
5172		modinfo->eeprom_len = I40E_MODULE_QSFP_MAX_LEN;
5173		break;
5174	default:
5175		netdev_err(vsi->netdev, "Module type unrecognized\n");
5176		return -EINVAL;
5177	}
5178	return 0;
5179}
5180
5181/**
5182 * i40e_get_module_eeprom - fills buffer with (Q)SFP+ module memory contents
5183 * @netdev: network interface device structure
5184 * @ee: EEPROM dump request structure
5185 * @data: buffer to be filled with EEPROM contents
5186 **/
5187static int i40e_get_module_eeprom(struct net_device *netdev,
5188				  struct ethtool_eeprom *ee,
5189				  u8 *data)
5190{
5191	struct i40e_netdev_priv *np = netdev_priv(netdev);
5192	struct i40e_vsi *vsi = np->vsi;
5193	struct i40e_pf *pf = vsi->back;
5194	struct i40e_hw *hw = &pf->hw;
5195	bool is_sfp = false;
5196	i40e_status status;
5197	u32 value = 0;
5198	int i;
5199
5200	if (!ee || !ee->len || !data)
5201		return -EINVAL;
5202
5203	if (hw->phy.link_info.module_type[0] == I40E_MODULE_TYPE_SFP)
5204		is_sfp = true;
5205
5206	for (i = 0; i < ee->len; i++) {
5207		u32 offset = i + ee->offset;
5208		u32 addr = is_sfp ? I40E_I2C_EEPROM_DEV_ADDR : 0;
5209
5210		/* Check if we need to access the other memory page */
5211		if (is_sfp) {
5212			if (offset >= ETH_MODULE_SFF_8079_LEN) {
5213				offset -= ETH_MODULE_SFF_8079_LEN;
5214				addr = I40E_I2C_EEPROM_DEV_ADDR2;
5215			}
5216		} else {
5217			while (offset >= ETH_MODULE_SFF_8436_LEN) {
5218				/* Compute memory page number and offset. */
5219				offset -= ETH_MODULE_SFF_8436_LEN / 2;
5220				addr++;
5221			}
5222		}
5223
5224		status = i40e_aq_get_phy_register(hw,
5225				I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE,
5226				addr, offset, &value, NULL);
5227		if (status)
5228			return -EIO;
5229		data[i] = value;
5230	}
5231	return 0;
5232}
5233
5234static int i40e_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
5235{
5236	return -EOPNOTSUPP;
5237}
5238
5239static int i40e_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
5240{
5241	return -EOPNOTSUPP;
5242}
5243
5244static const struct ethtool_ops i40e_ethtool_recovery_mode_ops = {
5245	.set_eeprom		= i40e_set_eeprom,
5246	.get_eeprom_len		= i40e_get_eeprom_len,
5247	.get_eeprom		= i40e_get_eeprom,
5248};
5249
5250static const struct ethtool_ops i40e_ethtool_ops = {
 
 
5251	.get_drvinfo		= i40e_get_drvinfo,
5252	.get_regs_len		= i40e_get_regs_len,
5253	.get_regs		= i40e_get_regs,
5254	.nway_reset		= i40e_nway_reset,
5255	.get_link		= ethtool_op_get_link,
5256	.get_wol		= i40e_get_wol,
5257	.set_wol		= i40e_set_wol,
5258	.set_eeprom		= i40e_set_eeprom,
5259	.get_eeprom_len		= i40e_get_eeprom_len,
5260	.get_eeprom		= i40e_get_eeprom,
5261	.get_ringparam		= i40e_get_ringparam,
5262	.set_ringparam		= i40e_set_ringparam,
5263	.get_pauseparam		= i40e_get_pauseparam,
5264	.set_pauseparam		= i40e_set_pauseparam,
5265	.get_msglevel		= i40e_get_msglevel,
5266	.set_msglevel		= i40e_set_msglevel,
5267	.get_rxnfc		= i40e_get_rxnfc,
5268	.set_rxnfc		= i40e_set_rxnfc,
5269	.self_test		= i40e_diag_test,
5270	.get_strings		= i40e_get_strings,
5271	.get_eee		= i40e_get_eee,
5272	.set_eee		= i40e_set_eee,
5273	.set_phys_id		= i40e_set_phys_id,
5274	.get_sset_count		= i40e_get_sset_count,
5275	.get_ethtool_stats	= i40e_get_ethtool_stats,
5276	.get_coalesce		= i40e_get_coalesce,
5277	.set_coalesce		= i40e_set_coalesce,
5278	.get_rxfh_key_size	= i40e_get_rxfh_key_size,
5279	.get_rxfh_indir_size	= i40e_get_rxfh_indir_size,
5280	.get_rxfh		= i40e_get_rxfh,
5281	.set_rxfh		= i40e_set_rxfh,
5282	.get_channels		= i40e_get_channels,
5283	.set_channels		= i40e_set_channels,
5284	.get_module_info	= i40e_get_module_info,
5285	.get_module_eeprom	= i40e_get_module_eeprom,
5286	.get_ts_info		= i40e_get_ts_info,
5287	.get_priv_flags		= i40e_get_priv_flags,
5288	.set_priv_flags		= i40e_set_priv_flags,
5289	.get_per_queue_coalesce	= i40e_get_per_queue_coalesce,
5290	.set_per_queue_coalesce	= i40e_set_per_queue_coalesce,
5291	.get_link_ksettings	= i40e_get_link_ksettings,
5292	.set_link_ksettings	= i40e_set_link_ksettings,
5293	.get_fecparam = i40e_get_fec_param,
5294	.set_fecparam = i40e_set_fec_param,
5295	.flash_device = i40e_ddp_flash,
5296};
5297
5298void i40e_set_ethtool_ops(struct net_device *netdev)
5299{
5300	struct i40e_netdev_priv *np = netdev_priv(netdev);
5301	struct i40e_pf		*pf = np->vsi->back;
5302
5303	if (!test_bit(__I40E_RECOVERY_MODE, pf->state))
5304		netdev->ethtool_ops = &i40e_ethtool_ops;
5305	else
5306		netdev->ethtool_ops = &i40e_ethtool_recovery_mode_ops;
5307}
v4.6
   1/*******************************************************************************
   2 *
   3 * Intel Ethernet Controller XL710 Family Linux Driver
   4 * Copyright(c) 2013 - 2016 Intel Corporation.
   5 *
   6 * This program is free software; you can redistribute it and/or modify it
   7 * under the terms and conditions of the GNU General Public License,
   8 * version 2, as published by the Free Software Foundation.
   9 *
  10 * This program is distributed in the hope it will be useful, but WITHOUT
  11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13 * more details.
  14 *
  15 * You should have received a copy of the GNU General Public License along
  16 * with this program.  If not, see <http://www.gnu.org/licenses/>.
  17 *
  18 * The full GNU General Public License is included in this distribution in
  19 * the file called "COPYING".
  20 *
  21 * Contact Information:
  22 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  24 *
  25 ******************************************************************************/
  26
  27/* ethtool support for i40e */
  28
  29#include "i40e.h"
  30#include "i40e_diag.h"
 
  31
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  32struct i40e_stats {
  33	char stat_string[ETH_GSTRING_LEN];
  34	int sizeof_stat;
  35	int stat_offset;
  36};
  37
 
 
 
 
  38#define I40E_STAT(_type, _name, _stat) { \
  39	.stat_string = _name, \
  40	.sizeof_stat = FIELD_SIZEOF(_type, _stat), \
  41	.stat_offset = offsetof(_type, _stat) \
  42}
  43
 
 
 
  44#define I40E_NETDEV_STAT(_net_stat) \
  45		I40E_STAT(struct rtnl_link_stats64, #_net_stat, _net_stat)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  46#define I40E_PF_STAT(_name, _stat) \
  47		I40E_STAT(struct i40e_pf, _name, _stat)
  48#define I40E_VSI_STAT(_name, _stat) \
  49		I40E_STAT(struct i40e_vsi, _name, _stat)
  50#define I40E_VEB_STAT(_name, _stat) \
  51		I40E_STAT(struct i40e_veb, _name, _stat)
 
 
 
 
  52
  53static const struct i40e_stats i40e_gstrings_net_stats[] = {
  54	I40E_NETDEV_STAT(rx_packets),
  55	I40E_NETDEV_STAT(tx_packets),
  56	I40E_NETDEV_STAT(rx_bytes),
  57	I40E_NETDEV_STAT(tx_bytes),
  58	I40E_NETDEV_STAT(rx_errors),
  59	I40E_NETDEV_STAT(tx_errors),
  60	I40E_NETDEV_STAT(rx_dropped),
  61	I40E_NETDEV_STAT(tx_dropped),
  62	I40E_NETDEV_STAT(collisions),
  63	I40E_NETDEV_STAT(rx_length_errors),
  64	I40E_NETDEV_STAT(rx_crc_errors),
  65};
  66
  67static const struct i40e_stats i40e_gstrings_veb_stats[] = {
  68	I40E_VEB_STAT("rx_bytes", stats.rx_bytes),
  69	I40E_VEB_STAT("tx_bytes", stats.tx_bytes),
  70	I40E_VEB_STAT("rx_unicast", stats.rx_unicast),
  71	I40E_VEB_STAT("tx_unicast", stats.tx_unicast),
  72	I40E_VEB_STAT("rx_multicast", stats.rx_multicast),
  73	I40E_VEB_STAT("tx_multicast", stats.tx_multicast),
  74	I40E_VEB_STAT("rx_broadcast", stats.rx_broadcast),
  75	I40E_VEB_STAT("tx_broadcast", stats.tx_broadcast),
  76	I40E_VEB_STAT("rx_discards", stats.rx_discards),
  77	I40E_VEB_STAT("tx_discards", stats.tx_discards),
  78	I40E_VEB_STAT("tx_errors", stats.tx_errors),
  79	I40E_VEB_STAT("rx_unknown_protocol", stats.rx_unknown_protocol),
 
 
 
 
 
 
 
  80};
  81
  82static const struct i40e_stats i40e_gstrings_misc_stats[] = {
  83	I40E_VSI_STAT("rx_unicast", eth_stats.rx_unicast),
  84	I40E_VSI_STAT("tx_unicast", eth_stats.tx_unicast),
  85	I40E_VSI_STAT("rx_multicast", eth_stats.rx_multicast),
  86	I40E_VSI_STAT("tx_multicast", eth_stats.tx_multicast),
  87	I40E_VSI_STAT("rx_broadcast", eth_stats.rx_broadcast),
  88	I40E_VSI_STAT("tx_broadcast", eth_stats.tx_broadcast),
  89	I40E_VSI_STAT("rx_unknown_protocol", eth_stats.rx_unknown_protocol),
  90	I40E_VSI_STAT("tx_linearize", tx_linearize),
  91	I40E_VSI_STAT("tx_force_wb", tx_force_wb),
  92	I40E_VSI_STAT("tx_lost_interrupt", tx_lost_interrupt),
  93	I40E_VSI_STAT("rx_alloc_fail", rx_buf_failed),
  94	I40E_VSI_STAT("rx_pg_alloc_fail", rx_page_failed),
  95};
  96
  97/* These PF_STATs might look like duplicates of some NETDEV_STATs,
  98 * but they are separate.  This device supports Virtualization, and
  99 * as such might have several netdevs supporting VMDq and FCoE going
 100 * through a single port.  The NETDEV_STATs are for individual netdevs
 101 * seen at the top of the stack, and the PF_STATs are for the physical
 102 * function at the bottom of the stack hosting those netdevs.
 103 *
 104 * The PF_STATs are appended to the netdev stats only when ethtool -S
 105 * is queried on the base PF netdev, not on the VMDq or FCoE netdev.
 106 */
 107static struct i40e_stats i40e_gstrings_stats[] = {
 108	I40E_PF_STAT("rx_bytes", stats.eth.rx_bytes),
 109	I40E_PF_STAT("tx_bytes", stats.eth.tx_bytes),
 110	I40E_PF_STAT("rx_unicast", stats.eth.rx_unicast),
 111	I40E_PF_STAT("tx_unicast", stats.eth.tx_unicast),
 112	I40E_PF_STAT("rx_multicast", stats.eth.rx_multicast),
 113	I40E_PF_STAT("tx_multicast", stats.eth.tx_multicast),
 114	I40E_PF_STAT("rx_broadcast", stats.eth.rx_broadcast),
 115	I40E_PF_STAT("tx_broadcast", stats.eth.tx_broadcast),
 116	I40E_PF_STAT("tx_errors", stats.eth.tx_errors),
 117	I40E_PF_STAT("rx_dropped", stats.eth.rx_discards),
 118	I40E_PF_STAT("tx_dropped_link_down", stats.tx_dropped_link_down),
 119	I40E_PF_STAT("rx_crc_errors", stats.crc_errors),
 120	I40E_PF_STAT("illegal_bytes", stats.illegal_bytes),
 121	I40E_PF_STAT("mac_local_faults", stats.mac_local_faults),
 122	I40E_PF_STAT("mac_remote_faults", stats.mac_remote_faults),
 123	I40E_PF_STAT("tx_timeout", tx_timeout_count),
 124	I40E_PF_STAT("rx_csum_bad", hw_csum_rx_error),
 125	I40E_PF_STAT("rx_length_errors", stats.rx_length_errors),
 126	I40E_PF_STAT("link_xon_rx", stats.link_xon_rx),
 127	I40E_PF_STAT("link_xoff_rx", stats.link_xoff_rx),
 128	I40E_PF_STAT("link_xon_tx", stats.link_xon_tx),
 129	I40E_PF_STAT("link_xoff_tx", stats.link_xoff_tx),
 130	I40E_PF_STAT("rx_size_64", stats.rx_size_64),
 131	I40E_PF_STAT("rx_size_127", stats.rx_size_127),
 132	I40E_PF_STAT("rx_size_255", stats.rx_size_255),
 133	I40E_PF_STAT("rx_size_511", stats.rx_size_511),
 134	I40E_PF_STAT("rx_size_1023", stats.rx_size_1023),
 135	I40E_PF_STAT("rx_size_1522", stats.rx_size_1522),
 136	I40E_PF_STAT("rx_size_big", stats.rx_size_big),
 137	I40E_PF_STAT("tx_size_64", stats.tx_size_64),
 138	I40E_PF_STAT("tx_size_127", stats.tx_size_127),
 139	I40E_PF_STAT("tx_size_255", stats.tx_size_255),
 140	I40E_PF_STAT("tx_size_511", stats.tx_size_511),
 141	I40E_PF_STAT("tx_size_1023", stats.tx_size_1023),
 142	I40E_PF_STAT("tx_size_1522", stats.tx_size_1522),
 143	I40E_PF_STAT("tx_size_big", stats.tx_size_big),
 144	I40E_PF_STAT("rx_undersize", stats.rx_undersize),
 145	I40E_PF_STAT("rx_fragments", stats.rx_fragments),
 146	I40E_PF_STAT("rx_oversize", stats.rx_oversize),
 147	I40E_PF_STAT("rx_jabber", stats.rx_jabber),
 148	I40E_PF_STAT("VF_admin_queue_requests", vf_aq_requests),
 149	I40E_PF_STAT("arq_overflows", arq_overflows),
 150	I40E_PF_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared),
 151	I40E_PF_STAT("fdir_flush_cnt", fd_flush_cnt),
 152	I40E_PF_STAT("fdir_atr_match", stats.fd_atr_match),
 153	I40E_PF_STAT("fdir_atr_tunnel_match", stats.fd_atr_tunnel_match),
 154	I40E_PF_STAT("fdir_atr_status", stats.fd_atr_status),
 155	I40E_PF_STAT("fdir_sb_match", stats.fd_sb_match),
 156	I40E_PF_STAT("fdir_sb_status", stats.fd_sb_status),
 
 
 157
 158	/* LPI stats */
 159	I40E_PF_STAT("tx_lpi_status", stats.tx_lpi_status),
 160	I40E_PF_STAT("rx_lpi_status", stats.rx_lpi_status),
 161	I40E_PF_STAT("tx_lpi_count", stats.tx_lpi_count),
 162	I40E_PF_STAT("rx_lpi_count", stats.rx_lpi_count),
 
 
 
 
 
 
 
 
 163};
 164
 165#ifdef I40E_FCOE
 166static const struct i40e_stats i40e_gstrings_fcoe_stats[] = {
 167	I40E_VSI_STAT("fcoe_bad_fccrc", fcoe_stats.fcoe_bad_fccrc),
 168	I40E_VSI_STAT("rx_fcoe_dropped", fcoe_stats.rx_fcoe_dropped),
 169	I40E_VSI_STAT("rx_fcoe_packets", fcoe_stats.rx_fcoe_packets),
 170	I40E_VSI_STAT("rx_fcoe_dwords", fcoe_stats.rx_fcoe_dwords),
 171	I40E_VSI_STAT("fcoe_ddp_count", fcoe_stats.fcoe_ddp_count),
 172	I40E_VSI_STAT("fcoe_last_error", fcoe_stats.fcoe_last_error),
 173	I40E_VSI_STAT("tx_fcoe_packets", fcoe_stats.tx_fcoe_packets),
 174	I40E_VSI_STAT("tx_fcoe_dwords", fcoe_stats.tx_fcoe_dwords),
 175};
 176
 177#endif /* I40E_FCOE */
 178#define I40E_QUEUE_STATS_LEN(n) \
 179	(((struct i40e_netdev_priv *)netdev_priv((n)))->vsi->num_queue_pairs \
 180	    * 2 /* Tx and Rx together */                                     \
 181	    * (sizeof(struct i40e_queue_stats) / sizeof(u64)))
 
 
 
 
 
 
 
 
 182#define I40E_GLOBAL_STATS_LEN	ARRAY_SIZE(i40e_gstrings_stats)
 183#define I40E_NETDEV_STATS_LEN   ARRAY_SIZE(i40e_gstrings_net_stats)
 184#define I40E_MISC_STATS_LEN	ARRAY_SIZE(i40e_gstrings_misc_stats)
 185#ifdef I40E_FCOE
 186#define I40E_FCOE_STATS_LEN	ARRAY_SIZE(i40e_gstrings_fcoe_stats)
 187#define I40E_VSI_STATS_LEN(n)	(I40E_NETDEV_STATS_LEN + \
 188				 I40E_FCOE_STATS_LEN + \
 189				 I40E_MISC_STATS_LEN + \
 190				 I40E_QUEUE_STATS_LEN((n)))
 191#else
 192#define I40E_VSI_STATS_LEN(n)   (I40E_NETDEV_STATS_LEN + \
 193				 I40E_MISC_STATS_LEN + \
 194				 I40E_QUEUE_STATS_LEN((n)))
 195#endif /* I40E_FCOE */
 196#define I40E_PFC_STATS_LEN ( \
 197		(FIELD_SIZEOF(struct i40e_pf, stats.priority_xoff_rx) + \
 198		 FIELD_SIZEOF(struct i40e_pf, stats.priority_xon_rx) + \
 199		 FIELD_SIZEOF(struct i40e_pf, stats.priority_xoff_tx) + \
 200		 FIELD_SIZEOF(struct i40e_pf, stats.priority_xon_tx) + \
 201		 FIELD_SIZEOF(struct i40e_pf, stats.priority_xon_2_xoff)) \
 202		 / sizeof(u64))
 203#define I40E_VEB_TC_STATS_LEN ( \
 204		(FIELD_SIZEOF(struct i40e_veb, tc_stats.tc_rx_packets) + \
 205		 FIELD_SIZEOF(struct i40e_veb, tc_stats.tc_rx_bytes) + \
 206		 FIELD_SIZEOF(struct i40e_veb, tc_stats.tc_tx_packets) + \
 207		 FIELD_SIZEOF(struct i40e_veb, tc_stats.tc_tx_bytes)) \
 208		 / sizeof(u64))
 209#define I40E_VEB_STATS_LEN	ARRAY_SIZE(i40e_gstrings_veb_stats)
 210#define I40E_VEB_STATS_TOTAL	(I40E_VEB_STATS_LEN + I40E_VEB_TC_STATS_LEN)
 211#define I40E_PF_STATS_LEN(n)	(I40E_GLOBAL_STATS_LEN + \
 212				 I40E_PFC_STATS_LEN + \
 213				 I40E_VSI_STATS_LEN((n)))
 
 
 
 
 214
 215enum i40e_ethtool_test_id {
 216	I40E_ETH_TEST_REG = 0,
 217	I40E_ETH_TEST_EEPROM,
 218	I40E_ETH_TEST_INTR,
 219	I40E_ETH_TEST_LOOPBACK,
 220	I40E_ETH_TEST_LINK,
 221};
 222
 223static const char i40e_gstrings_test[][ETH_GSTRING_LEN] = {
 224	"Register test  (offline)",
 225	"Eeprom test    (offline)",
 226	"Interrupt test (offline)",
 227	"Loopback test  (offline)",
 228	"Link test   (on/offline)"
 229};
 230
 231#define I40E_TEST_LEN (sizeof(i40e_gstrings_test) / ETH_GSTRING_LEN)
 232
 233static const char i40e_priv_flags_strings[][ETH_GSTRING_LEN] = {
 234	"NPAR",
 235	"LinkPolling",
 236	"flow-director-atr",
 237	"veb-stats",
 238	"packet-split",
 239	"hw-atr-eviction",
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 240};
 241
 242#define I40E_PRIV_FLAGS_STR_LEN ARRAY_SIZE(i40e_priv_flags_strings)
 243
 244/**
 245 * i40e_partition_setting_complaint - generic complaint for MFP restriction
 246 * @pf: the PF struct
 247 **/
 248static void i40e_partition_setting_complaint(struct i40e_pf *pf)
 249{
 250	dev_info(&pf->pdev->dev,
 251		 "The link settings are allowed to be changed only from the first partition of a given port. Please switch to the first partition in order to change the setting.\n");
 252}
 253
 254/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 255 * i40e_get_settings_link_up - Get the Link settings for when link is up
 256 * @hw: hw structure
 257 * @ecmd: ethtool command to fill in
 258 * @netdev: network interface device structure
 259 *
 260 **/
 261static void i40e_get_settings_link_up(struct i40e_hw *hw,
 262				      struct ethtool_cmd *ecmd,
 263				      struct net_device *netdev,
 264				      struct i40e_pf *pf)
 265{
 266	struct i40e_link_status *hw_link_info = &hw->phy.link_info;
 
 267	u32 link_speed = hw_link_info->link_speed;
 268
 269	/* Initialize supported and advertised settings based on phy settings */
 270	switch (hw_link_info->phy_type) {
 271	case I40E_PHY_TYPE_40GBASE_CR4:
 272	case I40E_PHY_TYPE_40GBASE_CR4_CU:
 273		ecmd->supported = SUPPORTED_Autoneg |
 274				  SUPPORTED_40000baseCR4_Full;
 275		ecmd->advertising = ADVERTISED_Autoneg |
 276				    ADVERTISED_40000baseCR4_Full;
 
 
 277		break;
 278	case I40E_PHY_TYPE_XLAUI:
 279	case I40E_PHY_TYPE_XLPPI:
 280	case I40E_PHY_TYPE_40GBASE_AOC:
 281		ecmd->supported = SUPPORTED_40000baseCR4_Full;
 
 
 
 282		break;
 283	case I40E_PHY_TYPE_40GBASE_SR4:
 284		ecmd->supported = SUPPORTED_40000baseSR4_Full;
 
 
 
 285		break;
 286	case I40E_PHY_TYPE_40GBASE_LR4:
 287		ecmd->supported = SUPPORTED_40000baseLR4_Full;
 
 
 
 288		break;
 
 
 289	case I40E_PHY_TYPE_10GBASE_SR:
 290	case I40E_PHY_TYPE_10GBASE_LR:
 291	case I40E_PHY_TYPE_1000BASE_SX:
 292	case I40E_PHY_TYPE_1000BASE_LX:
 293		ecmd->supported = SUPPORTED_10000baseT_Full;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 294		if (hw_link_info->module_type[2] &
 295		    I40E_MODULE_TYPE_1000BASE_SX ||
 296		    hw_link_info->module_type[2] &
 297		    I40E_MODULE_TYPE_1000BASE_LX) {
 298			ecmd->supported |= SUPPORTED_1000baseT_Full;
 
 299			if (hw_link_info->requested_speeds &
 300			    I40E_LINK_SPEED_1GB)
 301				ecmd->advertising |= ADVERTISED_1000baseT_Full;
 
 302		}
 303		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
 304			ecmd->advertising |= ADVERTISED_10000baseT_Full;
 
 305		break;
 306	case I40E_PHY_TYPE_10GBASE_T:
 
 
 307	case I40E_PHY_TYPE_1000BASE_T:
 308		ecmd->supported = SUPPORTED_Autoneg |
 309				  SUPPORTED_10000baseT_Full |
 310				  SUPPORTED_1000baseT_Full;
 311		ecmd->advertising = ADVERTISED_Autoneg;
 
 
 
 
 
 
 
 
 
 312		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
 313			ecmd->advertising |= ADVERTISED_10000baseT_Full;
 
 
 
 
 
 
 
 314		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
 315			ecmd->advertising |= ADVERTISED_1000baseT_Full;
 
 
 
 
 316		break;
 317	case I40E_PHY_TYPE_1000BASE_T_OPTICAL:
 318		ecmd->supported = SUPPORTED_Autoneg |
 319				  SUPPORTED_1000baseT_Full;
 320		ecmd->advertising = ADVERTISED_Autoneg |
 321				    ADVERTISED_1000baseT_Full;
 322		break;
 323	case I40E_PHY_TYPE_100BASE_TX:
 324		ecmd->supported = SUPPORTED_Autoneg |
 325				  SUPPORTED_100baseT_Full;
 326		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_100MB)
 327			ecmd->advertising |= ADVERTISED_100baseT_Full;
 328		break;
 329	case I40E_PHY_TYPE_10GBASE_CR1_CU:
 330	case I40E_PHY_TYPE_10GBASE_CR1:
 331		ecmd->supported = SUPPORTED_Autoneg |
 332				  SUPPORTED_10000baseT_Full;
 333		ecmd->advertising = ADVERTISED_Autoneg |
 334				    ADVERTISED_10000baseT_Full;
 
 
 335		break;
 336	case I40E_PHY_TYPE_XAUI:
 337	case I40E_PHY_TYPE_XFI:
 338	case I40E_PHY_TYPE_SFI:
 339	case I40E_PHY_TYPE_10GBASE_SFPP_CU:
 340	case I40E_PHY_TYPE_10GBASE_AOC:
 341		ecmd->supported = SUPPORTED_10000baseT_Full;
 
 
 
 
 342		break;
 343	case I40E_PHY_TYPE_SGMII:
 344		ecmd->supported = SUPPORTED_Autoneg |
 345				  SUPPORTED_1000baseT_Full;
 
 346		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
 347			ecmd->advertising |= ADVERTISED_1000baseT_Full;
 348		if (pf->flags & I40E_FLAG_100M_SGMII_CAPABLE) {
 349			ecmd->supported |= SUPPORTED_100baseT_Full;
 
 
 350			if (hw_link_info->requested_speeds &
 351			    I40E_LINK_SPEED_100MB)
 352				ecmd->advertising |= ADVERTISED_100baseT_Full;
 
 353		}
 354		break;
 355	/* Backplane is set based on supported phy types in get_settings
 356	 * so don't set anything here but don't warn either
 357	 */
 358	case I40E_PHY_TYPE_40GBASE_KR4:
 
 359	case I40E_PHY_TYPE_20GBASE_KR2:
 360	case I40E_PHY_TYPE_10GBASE_KR:
 361	case I40E_PHY_TYPE_10GBASE_KX4:
 362	case I40E_PHY_TYPE_1000BASE_KX:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 363		break;
 364	default:
 365		/* if we got here and link is up something bad is afoot */
 366		netdev_info(netdev, "WARNING: Link is up but PHY type 0x%x is not recognized.\n",
 
 367			    hw_link_info->phy_type);
 368	}
 369
 
 
 
 
 
 
 
 
 370	/* Set speed and duplex */
 371	switch (link_speed) {
 372	case I40E_LINK_SPEED_40GB:
 373		ethtool_cmd_speed_set(ecmd, SPEED_40000);
 
 
 
 374		break;
 375	case I40E_LINK_SPEED_20GB:
 376		ethtool_cmd_speed_set(ecmd, SPEED_20000);
 377		break;
 378	case I40E_LINK_SPEED_10GB:
 379		ethtool_cmd_speed_set(ecmd, SPEED_10000);
 
 
 
 
 
 
 380		break;
 381	case I40E_LINK_SPEED_1GB:
 382		ethtool_cmd_speed_set(ecmd, SPEED_1000);
 383		break;
 384	case I40E_LINK_SPEED_100MB:
 385		ethtool_cmd_speed_set(ecmd, SPEED_100);
 386		break;
 387	default:
 
 388		break;
 389	}
 390	ecmd->duplex = DUPLEX_FULL;
 391}
 392
 393/**
 394 * i40e_get_settings_link_down - Get the Link settings for when link is down
 395 * @hw: hw structure
 396 * @ecmd: ethtool command to fill in
 
 397 *
 398 * Reports link settings that can be determined when link is down
 399 **/
 400static void i40e_get_settings_link_down(struct i40e_hw *hw,
 401					struct ethtool_cmd *ecmd,
 402					struct i40e_pf *pf)
 403{
 404	enum i40e_aq_capabilities_phy_type phy_types = hw->phy.phy_types;
 405
 406	/* link is down and the driver needs to fall back on
 407	 * supported phy types to figure out what info to display
 408	 */
 409	ecmd->supported = 0x0;
 410	ecmd->advertising = 0x0;
 411	if (phy_types & I40E_CAP_PHY_TYPE_SGMII) {
 412		ecmd->supported |= SUPPORTED_Autoneg |
 413				   SUPPORTED_1000baseT_Full;
 414		ecmd->advertising |= ADVERTISED_Autoneg |
 415				     ADVERTISED_1000baseT_Full;
 416		if (pf->hw.mac.type == I40E_MAC_X722) {
 417			ecmd->supported |= SUPPORTED_100baseT_Full;
 418			ecmd->advertising |= ADVERTISED_100baseT_Full;
 419			if (pf->flags & I40E_FLAG_100M_SGMII_CAPABLE) {
 420				ecmd->supported |= SUPPORTED_100baseT_Full;
 421				ecmd->advertising |= ADVERTISED_100baseT_Full;
 422			}
 423		}
 424	}
 425	if (phy_types & I40E_CAP_PHY_TYPE_XAUI ||
 426	    phy_types & I40E_CAP_PHY_TYPE_XFI ||
 427	    phy_types & I40E_CAP_PHY_TYPE_SFI ||
 428	    phy_types & I40E_CAP_PHY_TYPE_10GBASE_SFPP_CU ||
 429	    phy_types & I40E_CAP_PHY_TYPE_10GBASE_AOC)
 430		ecmd->supported |= SUPPORTED_10000baseT_Full;
 431	if (phy_types & I40E_CAP_PHY_TYPE_10GBASE_CR1_CU ||
 432	    phy_types & I40E_CAP_PHY_TYPE_10GBASE_CR1 ||
 433	    phy_types & I40E_CAP_PHY_TYPE_10GBASE_T ||
 434	    phy_types & I40E_CAP_PHY_TYPE_10GBASE_SR ||
 435	    phy_types & I40E_CAP_PHY_TYPE_10GBASE_LR) {
 436		ecmd->supported |= SUPPORTED_Autoneg |
 437				   SUPPORTED_10000baseT_Full;
 438		ecmd->advertising |= ADVERTISED_Autoneg |
 439				     ADVERTISED_10000baseT_Full;
 440	}
 441	if (phy_types & I40E_CAP_PHY_TYPE_XLAUI ||
 442	    phy_types & I40E_CAP_PHY_TYPE_XLPPI ||
 443	    phy_types & I40E_CAP_PHY_TYPE_40GBASE_AOC)
 444		ecmd->supported |= SUPPORTED_40000baseCR4_Full;
 445	if (phy_types & I40E_CAP_PHY_TYPE_40GBASE_CR4_CU ||
 446	    phy_types & I40E_CAP_PHY_TYPE_40GBASE_CR4) {
 447		ecmd->supported |= SUPPORTED_Autoneg |
 448				  SUPPORTED_40000baseCR4_Full;
 449		ecmd->advertising |= ADVERTISED_Autoneg |
 450				    ADVERTISED_40000baseCR4_Full;
 451	}
 452	if ((phy_types & I40E_CAP_PHY_TYPE_100BASE_TX) &&
 453	    !(phy_types & I40E_CAP_PHY_TYPE_1000BASE_T)) {
 454		ecmd->supported |= SUPPORTED_Autoneg |
 455				   SUPPORTED_100baseT_Full;
 456		ecmd->advertising |= ADVERTISED_Autoneg |
 457				     ADVERTISED_100baseT_Full;
 458	}
 459	if (phy_types & I40E_CAP_PHY_TYPE_1000BASE_T ||
 460	    phy_types & I40E_CAP_PHY_TYPE_1000BASE_SX ||
 461	    phy_types & I40E_CAP_PHY_TYPE_1000BASE_LX ||
 462	    phy_types & I40E_CAP_PHY_TYPE_1000BASE_T_OPTICAL) {
 463		ecmd->supported |= SUPPORTED_Autoneg |
 464				   SUPPORTED_1000baseT_Full;
 465		ecmd->advertising |= ADVERTISED_Autoneg |
 466				     ADVERTISED_1000baseT_Full;
 467	}
 468	if (phy_types & I40E_CAP_PHY_TYPE_40GBASE_SR4)
 469		ecmd->supported |= SUPPORTED_40000baseSR4_Full;
 470	if (phy_types & I40E_CAP_PHY_TYPE_40GBASE_LR4)
 471		ecmd->supported |= SUPPORTED_40000baseLR4_Full;
 472
 473	/* With no link speed and duplex are unknown */
 474	ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
 475	ecmd->duplex = DUPLEX_UNKNOWN;
 476}
 477
 478/**
 479 * i40e_get_settings - Get Link Speed and Duplex settings
 480 * @netdev: network interface device structure
 481 * @ecmd: ethtool command
 482 *
 483 * Reports speed/duplex settings based on media_type
 484 **/
 485static int i40e_get_settings(struct net_device *netdev,
 486			     struct ethtool_cmd *ecmd)
 487{
 488	struct i40e_netdev_priv *np = netdev_priv(netdev);
 489	struct i40e_pf *pf = np->vsi->back;
 490	struct i40e_hw *hw = &pf->hw;
 491	struct i40e_link_status *hw_link_info = &hw->phy.link_info;
 492	bool link_up = hw_link_info->link_info & I40E_AQ_LINK_UP;
 493
 
 
 
 494	if (link_up)
 495		i40e_get_settings_link_up(hw, ecmd, netdev, pf);
 496	else
 497		i40e_get_settings_link_down(hw, ecmd, pf);
 498
 499	/* Now set the settings that don't rely on link being up/down */
 500
 501	/* For backplane, supported and advertised are only reliant on the
 502	 * phy types the NVM specifies are supported.
 503	 */
 504	if (hw->device_id == I40E_DEV_ID_KX_B ||
 505	    hw->device_id == I40E_DEV_ID_KX_C ||
 506	    hw->device_id == I40E_DEV_ID_20G_KR2 ||
 507	    hw->device_id ==  I40E_DEV_ID_20G_KR2_A) {
 508		ecmd->supported = SUPPORTED_Autoneg;
 509		ecmd->advertising = ADVERTISED_Autoneg;
 510		if (hw->phy.phy_types & I40E_CAP_PHY_TYPE_40GBASE_KR4) {
 511			ecmd->supported |= SUPPORTED_40000baseKR4_Full;
 512			ecmd->advertising |= ADVERTISED_40000baseKR4_Full;
 513		}
 514		if (hw->phy.phy_types & I40E_CAP_PHY_TYPE_20GBASE_KR2) {
 515			ecmd->supported |= SUPPORTED_20000baseKR2_Full;
 516			ecmd->advertising |= ADVERTISED_20000baseKR2_Full;
 517		}
 518		if (hw->phy.phy_types & I40E_CAP_PHY_TYPE_10GBASE_KR) {
 519			ecmd->supported |= SUPPORTED_10000baseKR_Full;
 520			ecmd->advertising |= ADVERTISED_10000baseKR_Full;
 521		}
 522		if (hw->phy.phy_types & I40E_CAP_PHY_TYPE_10GBASE_KX4) {
 523			ecmd->supported |= SUPPORTED_10000baseKX4_Full;
 524			ecmd->advertising |= ADVERTISED_10000baseKX4_Full;
 525		}
 526		if (hw->phy.phy_types & I40E_CAP_PHY_TYPE_1000BASE_KX) {
 527			ecmd->supported |= SUPPORTED_1000baseKX_Full;
 528			ecmd->advertising |= ADVERTISED_1000baseKX_Full;
 529		}
 530	}
 531
 532	/* Set autoneg settings */
 533	ecmd->autoneg = ((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ?
 534			  AUTONEG_ENABLE : AUTONEG_DISABLE);
 535
 
 536	switch (hw->phy.media_type) {
 537	case I40E_MEDIA_TYPE_BACKPLANE:
 538		ecmd->supported |= SUPPORTED_Autoneg |
 539				   SUPPORTED_Backplane;
 540		ecmd->advertising |= ADVERTISED_Autoneg |
 541				     ADVERTISED_Backplane;
 542		ecmd->port = PORT_NONE;
 
 543		break;
 544	case I40E_MEDIA_TYPE_BASET:
 545		ecmd->supported |= SUPPORTED_TP;
 546		ecmd->advertising |= ADVERTISED_TP;
 547		ecmd->port = PORT_TP;
 548		break;
 549	case I40E_MEDIA_TYPE_DA:
 550	case I40E_MEDIA_TYPE_CX4:
 551		ecmd->supported |= SUPPORTED_FIBRE;
 552		ecmd->advertising |= ADVERTISED_FIBRE;
 553		ecmd->port = PORT_DA;
 554		break;
 555	case I40E_MEDIA_TYPE_FIBER:
 556		ecmd->supported |= SUPPORTED_FIBRE;
 557		ecmd->port = PORT_FIBRE;
 
 558		break;
 559	case I40E_MEDIA_TYPE_UNKNOWN:
 560	default:
 561		ecmd->port = PORT_OTHER;
 562		break;
 563	}
 564
 565	/* Set transceiver */
 566	ecmd->transceiver = XCVR_EXTERNAL;
 567
 568	/* Set flow control settings */
 569	ecmd->supported |= SUPPORTED_Pause;
 570
 571	switch (hw->fc.requested_mode) {
 572	case I40E_FC_FULL:
 573		ecmd->advertising |= ADVERTISED_Pause;
 574		break;
 575	case I40E_FC_TX_PAUSE:
 576		ecmd->advertising |= ADVERTISED_Asym_Pause;
 
 577		break;
 578	case I40E_FC_RX_PAUSE:
 579		ecmd->advertising |= (ADVERTISED_Pause |
 580				      ADVERTISED_Asym_Pause);
 
 581		break;
 582	default:
 583		ecmd->advertising &= ~(ADVERTISED_Pause |
 584				       ADVERTISED_Asym_Pause);
 
 585		break;
 586	}
 587
 588	return 0;
 589}
 590
 591/**
 592 * i40e_set_settings - Set Speed and Duplex
 593 * @netdev: network interface device structure
 594 * @ecmd: ethtool command
 595 *
 596 * Set speed/duplex per media_types advertised/forced
 597 **/
 598static int i40e_set_settings(struct net_device *netdev,
 599			     struct ethtool_cmd *ecmd)
 600{
 601	struct i40e_netdev_priv *np = netdev_priv(netdev);
 602	struct i40e_aq_get_phy_abilities_resp abilities;
 
 
 603	struct i40e_aq_set_phy_config config;
 604	struct i40e_pf *pf = np->vsi->back;
 605	struct i40e_vsi *vsi = np->vsi;
 606	struct i40e_hw *hw = &pf->hw;
 607	struct ethtool_cmd safe_ecmd;
 608	i40e_status status = 0;
 609	bool change = false;
 610	int err = 0;
 611	u8 autoneg;
 612	u32 advertise;
 613
 614	/* Changing port settings is not supported if this isn't the
 615	 * port's controlling PF
 616	 */
 617	if (hw->partition_id != 1) {
 618		i40e_partition_setting_complaint(pf);
 619		return -EOPNOTSUPP;
 620	}
 621
 622	if (vsi != pf->vsi[pf->lan_vsi])
 623		return -EOPNOTSUPP;
 624
 625	if (hw->phy.media_type != I40E_MEDIA_TYPE_BASET &&
 626	    hw->phy.media_type != I40E_MEDIA_TYPE_FIBER &&
 627	    hw->phy.media_type != I40E_MEDIA_TYPE_BACKPLANE &&
 
 628	    hw->phy.link_info.link_info & I40E_AQ_LINK_UP)
 629		return -EOPNOTSUPP;
 630
 631	if (hw->device_id == I40E_DEV_ID_KX_B ||
 632	    hw->device_id == I40E_DEV_ID_KX_C ||
 633	    hw->device_id == I40E_DEV_ID_20G_KR2 ||
 634	    hw->device_id == I40E_DEV_ID_20G_KR2_A) {
 
 
 635		netdev_info(netdev, "Changing settings is not supported on backplane.\n");
 636		return -EOPNOTSUPP;
 637	}
 638
 
 
 
 
 
 
 639	/* get our own copy of the bits to check against */
 640	memset(&safe_ecmd, 0, sizeof(struct ethtool_cmd));
 641	i40e_get_settings(netdev, &safe_ecmd);
 
 
 
 642
 643	/* save autoneg and speed out of ecmd */
 644	autoneg = ecmd->autoneg;
 645	advertise = ecmd->advertising;
 
 
 
 
 646
 647	/* set autoneg and speed back to what they currently are */
 648	ecmd->autoneg = safe_ecmd.autoneg;
 649	ecmd->advertising = safe_ecmd.advertising;
 650
 651	ecmd->cmd = safe_ecmd.cmd;
 652	/* If ecmd and safe_ecmd are not the same now, then they are
 653	 * trying to set something that we do not support
 654	 */
 655	if (memcmp(ecmd, &safe_ecmd, sizeof(struct ethtool_cmd)))
 
 656		return -EOPNOTSUPP;
 657
 658	while (test_bit(__I40E_CONFIG_BUSY, &vsi->state))
 
 
 
 659		usleep_range(1000, 2000);
 
 660
 661	/* Get the current phy config */
 662	status = i40e_aq_get_phy_capabilities(hw, false, false, &abilities,
 663					      NULL);
 664	if (status)
 665		return -EAGAIN;
 
 
 666
 667	/* Copy abilities to config in case autoneg is not
 668	 * set below
 669	 */
 670	memset(&config, 0, sizeof(struct i40e_aq_set_phy_config));
 671	config.abilities = abilities.abilities;
 672
 673	/* Check autoneg */
 674	if (autoneg == AUTONEG_ENABLE) {
 675		/* If autoneg was not already enabled */
 676		if (!(hw->phy.link_info.an_info & I40E_AQ_AN_COMPLETED)) {
 677			/* If autoneg is not supported, return error */
 678			if (!(safe_ecmd.supported & SUPPORTED_Autoneg)) {
 
 
 679				netdev_info(netdev, "Autoneg not supported on this phy\n");
 680				return -EINVAL;
 
 681			}
 682			/* Autoneg is allowed to change */
 683			config.abilities = abilities.abilities |
 684					   I40E_AQ_PHY_ENABLE_AN;
 685			change = true;
 686		}
 687	} else {
 688		/* If autoneg is currently enabled */
 689		if (hw->phy.link_info.an_info & I40E_AQ_AN_COMPLETED) {
 690			/* If autoneg is supported 10GBASE_T is the only PHY
 691			 * that can disable it, so otherwise return error
 692			 */
 693			if (safe_ecmd.supported & SUPPORTED_Autoneg &&
 
 
 694			    hw->phy.link_info.phy_type !=
 695			    I40E_PHY_TYPE_10GBASE_T) {
 696				netdev_info(netdev, "Autoneg cannot be disabled on this phy\n");
 697				return -EINVAL;
 
 698			}
 699			/* Autoneg is allowed to change */
 700			config.abilities = abilities.abilities &
 701					   ~I40E_AQ_PHY_ENABLE_AN;
 702			change = true;
 703		}
 704	}
 705
 706	if (advertise & ~safe_ecmd.supported)
 707		return -EINVAL;
 708
 709	if (advertise & ADVERTISED_100baseT_Full)
 710		config.link_speed |= I40E_LINK_SPEED_100MB;
 711	if (advertise & ADVERTISED_1000baseT_Full ||
 712	    advertise & ADVERTISED_1000baseKX_Full)
 
 
 
 
 713		config.link_speed |= I40E_LINK_SPEED_1GB;
 714	if (advertise & ADVERTISED_10000baseT_Full ||
 715	    advertise & ADVERTISED_10000baseKX4_Full ||
 716	    advertise & ADVERTISED_10000baseKR_Full)
 
 
 
 
 
 
 
 
 
 717		config.link_speed |= I40E_LINK_SPEED_10GB;
 718	if (advertise & ADVERTISED_20000baseKR2_Full)
 
 
 
 
 
 
 
 719		config.link_speed |= I40E_LINK_SPEED_20GB;
 720	if (advertise & ADVERTISED_40000baseKR4_Full ||
 721	    advertise & ADVERTISED_40000baseCR4_Full ||
 722	    advertise & ADVERTISED_40000baseSR4_Full ||
 723	    advertise & ADVERTISED_40000baseLR4_Full)
 
 
 
 
 
 
 
 
 
 
 
 724		config.link_speed |= I40E_LINK_SPEED_40GB;
 725
 726	/* If speed didn't get set, set it to what it currently is.
 727	 * This is needed because if advertise is 0 (as it is when autoneg
 728	 * is disabled) then speed won't get set.
 729	 */
 730	if (!config.link_speed)
 731		config.link_speed = abilities.link_speed;
 732
 733	if (change || (abilities.link_speed != config.link_speed)) {
 734		/* copy over the rest of the abilities */
 735		config.phy_type = abilities.phy_type;
 
 736		config.eee_capability = abilities.eee_capability;
 737		config.eeer = abilities.eeer_val;
 738		config.low_power_ctrl = abilities.d3_lpan;
 
 
 739
 740		/* save the requested speeds */
 741		hw->phy.link_info.requested_speeds = config.link_speed;
 742		/* set link and auto negotiation so changes take effect */
 743		config.abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
 744		/* If link is up put link down */
 745		if (hw->phy.link_info.link_info & I40E_AQ_LINK_UP) {
 746			/* Tell the OS link is going down, the link will go
 747			 * back up when fw says it is ready asynchronously
 748			 */
 749			i40e_print_link_message(vsi, false);
 750			netif_carrier_off(netdev);
 751			netif_tx_stop_all_queues(netdev);
 752		}
 753
 754		/* make the aq call */
 755		status = i40e_aq_set_phy_config(hw, &config, NULL);
 756		if (status) {
 757			netdev_info(netdev, "Set phy config failed, err %s aq_err %s\n",
 
 758				    i40e_stat_str(hw, status),
 759				    i40e_aq_str(hw, hw->aq.asq_last_status));
 760			return -EAGAIN;
 
 761		}
 762
 763		status = i40e_update_link_info(hw);
 764		if (status)
 765			netdev_dbg(netdev, "Updating link info failed with err %s aq_err %s\n",
 
 766				   i40e_stat_str(hw, status),
 767				   i40e_aq_str(hw, hw->aq.asq_last_status));
 768
 769	} else {
 770		netdev_info(netdev, "Nothing changed, exiting without setting anything.\n");
 771	}
 772
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 773	return err;
 774}
 775
 776static int i40e_nway_reset(struct net_device *netdev)
 777{
 778	/* restart autonegotiation */
 779	struct i40e_netdev_priv *np = netdev_priv(netdev);
 780	struct i40e_pf *pf = np->vsi->back;
 781	struct i40e_hw *hw = &pf->hw;
 782	bool link_up = hw->phy.link_info.link_info & I40E_AQ_LINK_UP;
 783	i40e_status ret = 0;
 784
 785	ret = i40e_aq_set_link_restart_an(hw, link_up, NULL);
 786	if (ret) {
 787		netdev_info(netdev, "link restart failed, err %s aq_err %s\n",
 788			    i40e_stat_str(hw, ret),
 789			    i40e_aq_str(hw, hw->aq.asq_last_status));
 790		return -EIO;
 791	}
 792
 793	return 0;
 794}
 795
 796/**
 797 * i40e_get_pauseparam -  Get Flow Control status
 
 
 
 798 * Return tx/rx-pause status
 799 **/
 800static void i40e_get_pauseparam(struct net_device *netdev,
 801				struct ethtool_pauseparam *pause)
 802{
 803	struct i40e_netdev_priv *np = netdev_priv(netdev);
 804	struct i40e_pf *pf = np->vsi->back;
 805	struct i40e_hw *hw = &pf->hw;
 806	struct i40e_link_status *hw_link_info = &hw->phy.link_info;
 807	struct i40e_dcbx_config *dcbx_cfg = &hw->local_dcbx_config;
 808
 809	pause->autoneg =
 810		((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ?
 811		  AUTONEG_ENABLE : AUTONEG_DISABLE);
 812
 813	/* PFC enabled so report LFC as off */
 814	if (dcbx_cfg->pfc.pfcenable) {
 815		pause->rx_pause = 0;
 816		pause->tx_pause = 0;
 817		return;
 818	}
 819
 820	if (hw->fc.current_mode == I40E_FC_RX_PAUSE) {
 821		pause->rx_pause = 1;
 822	} else if (hw->fc.current_mode == I40E_FC_TX_PAUSE) {
 823		pause->tx_pause = 1;
 824	} else if (hw->fc.current_mode == I40E_FC_FULL) {
 825		pause->rx_pause = 1;
 826		pause->tx_pause = 1;
 827	}
 828}
 829
 830/**
 831 * i40e_set_pauseparam - Set Flow Control parameter
 832 * @netdev: network interface device structure
 833 * @pause: return tx/rx flow control status
 834 **/
 835static int i40e_set_pauseparam(struct net_device *netdev,
 836			       struct ethtool_pauseparam *pause)
 837{
 838	struct i40e_netdev_priv *np = netdev_priv(netdev);
 839	struct i40e_pf *pf = np->vsi->back;
 840	struct i40e_vsi *vsi = np->vsi;
 841	struct i40e_hw *hw = &pf->hw;
 842	struct i40e_link_status *hw_link_info = &hw->phy.link_info;
 843	struct i40e_dcbx_config *dcbx_cfg = &hw->local_dcbx_config;
 844	bool link_up = hw_link_info->link_info & I40E_AQ_LINK_UP;
 845	i40e_status status;
 846	u8 aq_failures;
 847	int err = 0;
 
 848
 849	/* Changing the port's flow control is not supported if this isn't the
 850	 * port's controlling PF
 851	 */
 852	if (hw->partition_id != 1) {
 853		i40e_partition_setting_complaint(pf);
 854		return -EOPNOTSUPP;
 855	}
 856
 857	if (vsi != pf->vsi[pf->lan_vsi])
 858		return -EOPNOTSUPP;
 859
 860	if (pause->autoneg != ((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ?
 861	    AUTONEG_ENABLE : AUTONEG_DISABLE)) {
 862		netdev_info(netdev, "To change autoneg please use: ethtool -s <dev> autoneg <on|off>\n");
 863		return -EOPNOTSUPP;
 864	}
 865
 866	/* If we have link and don't have autoneg */
 867	if (!test_bit(__I40E_DOWN, &pf->state) &&
 868	    !(hw_link_info->an_info & I40E_AQ_AN_COMPLETED)) {
 869		/* Send message that it might not necessarily work*/
 870		netdev_info(netdev, "Autoneg did not complete so changing settings may not result in an actual change.\n");
 871	}
 872
 873	if (dcbx_cfg->pfc.pfcenable) {
 874		netdev_info(netdev,
 875			    "Priority flow control enabled. Cannot set link flow control.\n");
 876		return -EOPNOTSUPP;
 877	}
 878
 879	if (pause->rx_pause && pause->tx_pause)
 880		hw->fc.requested_mode = I40E_FC_FULL;
 881	else if (pause->rx_pause && !pause->tx_pause)
 882		hw->fc.requested_mode = I40E_FC_RX_PAUSE;
 883	else if (!pause->rx_pause && pause->tx_pause)
 884		hw->fc.requested_mode = I40E_FC_TX_PAUSE;
 885	else if (!pause->rx_pause && !pause->tx_pause)
 886		hw->fc.requested_mode = I40E_FC_NONE;
 887	else
 888		 return -EINVAL;
 889
 890	/* Tell the OS link is going down, the link will go back up when fw
 891	 * says it is ready asynchronously
 892	 */
 893	i40e_print_link_message(vsi, false);
 894	netif_carrier_off(netdev);
 895	netif_tx_stop_all_queues(netdev);
 896
 897	/* Set the fc mode and only restart an if link is up*/
 898	status = i40e_set_fc(hw, &aq_failures, link_up);
 899
 900	if (aq_failures & I40E_SET_FC_AQ_FAIL_GET) {
 901		netdev_info(netdev, "Set fc failed on the get_phy_capabilities call with err %s aq_err %s\n",
 902			    i40e_stat_str(hw, status),
 903			    i40e_aq_str(hw, hw->aq.asq_last_status));
 904		err = -EAGAIN;
 905	}
 906	if (aq_failures & I40E_SET_FC_AQ_FAIL_SET) {
 907		netdev_info(netdev, "Set fc failed on the set_phy_config call with err %s aq_err %s\n",
 908			    i40e_stat_str(hw, status),
 909			    i40e_aq_str(hw, hw->aq.asq_last_status));
 910		err = -EAGAIN;
 911	}
 912	if (aq_failures & I40E_SET_FC_AQ_FAIL_UPDATE) {
 913		netdev_info(netdev, "Set fc failed on the get_link_info call with err %s aq_err %s\n",
 914			    i40e_stat_str(hw, status),
 915			    i40e_aq_str(hw, hw->aq.asq_last_status));
 916		err = -EAGAIN;
 917	}
 918
 919	if (!test_bit(__I40E_DOWN, &pf->state)) {
 920		/* Give it a little more time to try to come back */
 921		msleep(75);
 922		if (!test_bit(__I40E_DOWN, &pf->state))
 923			return i40e_nway_reset(netdev);
 924	}
 925
 926	return err;
 927}
 928
 929static u32 i40e_get_msglevel(struct net_device *netdev)
 930{
 931	struct i40e_netdev_priv *np = netdev_priv(netdev);
 932	struct i40e_pf *pf = np->vsi->back;
 
 
 
 
 933
 934	return pf->msg_enable;
 935}
 936
 937static void i40e_set_msglevel(struct net_device *netdev, u32 data)
 938{
 939	struct i40e_netdev_priv *np = netdev_priv(netdev);
 940	struct i40e_pf *pf = np->vsi->back;
 941
 942	if (I40E_DEBUG_USER & data)
 943		pf->hw.debug_mask = data;
 944	pf->msg_enable = data;
 
 945}
 946
 947static int i40e_get_regs_len(struct net_device *netdev)
 948{
 949	int reg_count = 0;
 950	int i;
 951
 952	for (i = 0; i40e_reg_list[i].offset != 0; i++)
 953		reg_count += i40e_reg_list[i].elements;
 954
 955	return reg_count * sizeof(u32);
 956}
 957
 958static void i40e_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
 959			  void *p)
 960{
 961	struct i40e_netdev_priv *np = netdev_priv(netdev);
 962	struct i40e_pf *pf = np->vsi->back;
 963	struct i40e_hw *hw = &pf->hw;
 964	u32 *reg_buf = p;
 965	int i, j, ri;
 966	u32 reg;
 967
 968	/* Tell ethtool which driver-version-specific regs output we have.
 969	 *
 970	 * At some point, if we have ethtool doing special formatting of
 971	 * this data, it will rely on this version number to know how to
 972	 * interpret things.  Hence, this needs to be updated if/when the
 973	 * diags register table is changed.
 974	 */
 975	regs->version = 1;
 976
 977	/* loop through the diags reg table for what to print */
 978	ri = 0;
 979	for (i = 0; i40e_reg_list[i].offset != 0; i++) {
 980		for (j = 0; j < i40e_reg_list[i].elements; j++) {
 981			reg = i40e_reg_list[i].offset
 982				+ (j * i40e_reg_list[i].stride);
 983			reg_buf[ri++] = rd32(hw, reg);
 984		}
 985	}
 986
 987}
 988
 989static int i40e_get_eeprom(struct net_device *netdev,
 990			   struct ethtool_eeprom *eeprom, u8 *bytes)
 991{
 992	struct i40e_netdev_priv *np = netdev_priv(netdev);
 993	struct i40e_hw *hw = &np->vsi->back->hw;
 994	struct i40e_pf *pf = np->vsi->back;
 995	int ret_val = 0, len, offset;
 996	u8 *eeprom_buff;
 997	u16 i, sectors;
 998	bool last;
 999	u32 magic;
1000
1001#define I40E_NVM_SECTOR_SIZE  4096
1002	if (eeprom->len == 0)
1003		return -EINVAL;
1004
1005	/* check for NVMUpdate access method */
1006	magic = hw->vendor_id | (hw->device_id << 16);
1007	if (eeprom->magic && eeprom->magic != magic) {
1008		struct i40e_nvm_access *cmd = (struct i40e_nvm_access *)eeprom;
1009		int errno = 0;
1010
1011		/* make sure it is the right magic for NVMUpdate */
1012		if ((eeprom->magic >> 16) != hw->device_id)
1013			errno = -EINVAL;
1014		else if (test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state) ||
1015			 test_bit(__I40E_RESET_INTR_RECEIVED, &pf->state))
1016			errno = -EBUSY;
1017		else
1018			ret_val = i40e_nvmupd_command(hw, cmd, bytes, &errno);
1019
1020		if ((errno || ret_val) && (hw->debug_mask & I40E_DEBUG_NVM))
1021			dev_info(&pf->pdev->dev,
1022				 "NVMUpdate read failed err=%d status=0x%x errno=%d module=%d offset=0x%x size=%d\n",
1023				 ret_val, hw->aq.asq_last_status, errno,
1024				 (u8)(cmd->config & I40E_NVM_MOD_PNT_MASK),
1025				 cmd->offset, cmd->data_size);
1026
1027		return errno;
1028	}
1029
1030	/* normal ethtool get_eeprom support */
1031	eeprom->magic = hw->vendor_id | (hw->device_id << 16);
1032
1033	eeprom_buff = kzalloc(eeprom->len, GFP_KERNEL);
1034	if (!eeprom_buff)
1035		return -ENOMEM;
1036
1037	ret_val = i40e_acquire_nvm(hw, I40E_RESOURCE_READ);
1038	if (ret_val) {
1039		dev_info(&pf->pdev->dev,
1040			 "Failed Acquiring NVM resource for read err=%d status=0x%x\n",
1041			 ret_val, hw->aq.asq_last_status);
1042		goto free_buff;
1043	}
1044
1045	sectors = eeprom->len / I40E_NVM_SECTOR_SIZE;
1046	sectors += (eeprom->len % I40E_NVM_SECTOR_SIZE) ? 1 : 0;
1047	len = I40E_NVM_SECTOR_SIZE;
1048	last = false;
1049	for (i = 0; i < sectors; i++) {
1050		if (i == (sectors - 1)) {
1051			len = eeprom->len - (I40E_NVM_SECTOR_SIZE * i);
1052			last = true;
1053		}
1054		offset = eeprom->offset + (I40E_NVM_SECTOR_SIZE * i),
1055		ret_val = i40e_aq_read_nvm(hw, 0x0, offset, len,
1056				(u8 *)eeprom_buff + (I40E_NVM_SECTOR_SIZE * i),
1057				last, NULL);
1058		if (ret_val && hw->aq.asq_last_status == I40E_AQ_RC_EPERM) {
1059			dev_info(&pf->pdev->dev,
1060				 "read NVM failed, invalid offset 0x%x\n",
1061				 offset);
1062			break;
1063		} else if (ret_val &&
1064			   hw->aq.asq_last_status == I40E_AQ_RC_EACCES) {
1065			dev_info(&pf->pdev->dev,
1066				 "read NVM failed, access, offset 0x%x\n",
1067				 offset);
1068			break;
1069		} else if (ret_val) {
1070			dev_info(&pf->pdev->dev,
1071				 "read NVM failed offset %d err=%d status=0x%x\n",
1072				 offset, ret_val, hw->aq.asq_last_status);
1073			break;
1074		}
1075	}
1076
1077	i40e_release_nvm(hw);
1078	memcpy(bytes, (u8 *)eeprom_buff, eeprom->len);
1079free_buff:
1080	kfree(eeprom_buff);
1081	return ret_val;
1082}
1083
1084static int i40e_get_eeprom_len(struct net_device *netdev)
1085{
1086	struct i40e_netdev_priv *np = netdev_priv(netdev);
1087	struct i40e_hw *hw = &np->vsi->back->hw;
1088	u32 val;
1089
 
 
 
 
 
1090	val = (rd32(hw, I40E_GLPCI_LBARCTRL)
1091		& I40E_GLPCI_LBARCTRL_FL_SIZE_MASK)
1092		>> I40E_GLPCI_LBARCTRL_FL_SIZE_SHIFT;
1093	/* register returns value in power of 2, 64Kbyte chunks. */
1094	val = (64 * 1024) * BIT(val);
1095	return val;
1096}
1097
1098static int i40e_set_eeprom(struct net_device *netdev,
1099			   struct ethtool_eeprom *eeprom, u8 *bytes)
1100{
1101	struct i40e_netdev_priv *np = netdev_priv(netdev);
1102	struct i40e_hw *hw = &np->vsi->back->hw;
1103	struct i40e_pf *pf = np->vsi->back;
1104	struct i40e_nvm_access *cmd = (struct i40e_nvm_access *)eeprom;
1105	int ret_val = 0;
1106	int errno = 0;
1107	u32 magic;
1108
1109	/* normal ethtool set_eeprom is not supported */
1110	magic = hw->vendor_id | (hw->device_id << 16);
1111	if (eeprom->magic == magic)
1112		errno = -EOPNOTSUPP;
1113	/* check for NVMUpdate access method */
1114	else if (!eeprom->magic || (eeprom->magic >> 16) != hw->device_id)
1115		errno = -EINVAL;
1116	else if (test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state) ||
1117		 test_bit(__I40E_RESET_INTR_RECEIVED, &pf->state))
1118		errno = -EBUSY;
1119	else
1120		ret_val = i40e_nvmupd_command(hw, cmd, bytes, &errno);
1121
1122	if ((errno || ret_val) && (hw->debug_mask & I40E_DEBUG_NVM))
1123		dev_info(&pf->pdev->dev,
1124			 "NVMUpdate write failed err=%d status=0x%x errno=%d module=%d offset=0x%x size=%d\n",
1125			 ret_val, hw->aq.asq_last_status, errno,
1126			 (u8)(cmd->config & I40E_NVM_MOD_PNT_MASK),
1127			 cmd->offset, cmd->data_size);
1128
1129	return errno;
1130}
1131
1132static void i40e_get_drvinfo(struct net_device *netdev,
1133			     struct ethtool_drvinfo *drvinfo)
1134{
1135	struct i40e_netdev_priv *np = netdev_priv(netdev);
1136	struct i40e_vsi *vsi = np->vsi;
1137	struct i40e_pf *pf = vsi->back;
1138
1139	strlcpy(drvinfo->driver, i40e_driver_name, sizeof(drvinfo->driver));
1140	strlcpy(drvinfo->version, i40e_driver_version_str,
1141		sizeof(drvinfo->version));
1142	strlcpy(drvinfo->fw_version, i40e_nvm_version_str(&pf->hw),
1143		sizeof(drvinfo->fw_version));
1144	strlcpy(drvinfo->bus_info, pci_name(pf->pdev),
1145		sizeof(drvinfo->bus_info));
 
 
 
1146}
1147
1148static void i40e_get_ringparam(struct net_device *netdev,
1149			       struct ethtool_ringparam *ring)
1150{
1151	struct i40e_netdev_priv *np = netdev_priv(netdev);
1152	struct i40e_pf *pf = np->vsi->back;
1153	struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi];
1154
1155	ring->rx_max_pending = I40E_MAX_NUM_DESCRIPTORS;
1156	ring->tx_max_pending = I40E_MAX_NUM_DESCRIPTORS;
1157	ring->rx_mini_max_pending = 0;
1158	ring->rx_jumbo_max_pending = 0;
1159	ring->rx_pending = vsi->rx_rings[0]->count;
1160	ring->tx_pending = vsi->tx_rings[0]->count;
1161	ring->rx_mini_pending = 0;
1162	ring->rx_jumbo_pending = 0;
1163}
1164
 
 
 
 
 
 
 
 
 
 
 
1165static int i40e_set_ringparam(struct net_device *netdev,
1166			      struct ethtool_ringparam *ring)
1167{
1168	struct i40e_ring *tx_rings = NULL, *rx_rings = NULL;
1169	struct i40e_netdev_priv *np = netdev_priv(netdev);
 
1170	struct i40e_vsi *vsi = np->vsi;
1171	struct i40e_pf *pf = vsi->back;
1172	u32 new_rx_count, new_tx_count;
 
 
1173	int i, err = 0;
1174
1175	if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
1176		return -EINVAL;
1177
1178	if (ring->tx_pending > I40E_MAX_NUM_DESCRIPTORS ||
1179	    ring->tx_pending < I40E_MIN_NUM_DESCRIPTORS ||
1180	    ring->rx_pending > I40E_MAX_NUM_DESCRIPTORS ||
1181	    ring->rx_pending < I40E_MIN_NUM_DESCRIPTORS) {
1182		netdev_info(netdev,
1183			    "Descriptors requested (Tx: %d / Rx: %d) out of range [%d-%d]\n",
1184			    ring->tx_pending, ring->rx_pending,
1185			    I40E_MIN_NUM_DESCRIPTORS, I40E_MAX_NUM_DESCRIPTORS);
1186		return -EINVAL;
1187	}
1188
1189	new_tx_count = ALIGN(ring->tx_pending, I40E_REQ_DESCRIPTOR_MULTIPLE);
1190	new_rx_count = ALIGN(ring->rx_pending, I40E_REQ_DESCRIPTOR_MULTIPLE);
1191
1192	/* if nothing to do return success */
1193	if ((new_tx_count == vsi->tx_rings[0]->count) &&
1194	    (new_rx_count == vsi->rx_rings[0]->count))
1195		return 0;
1196
1197	while (test_and_set_bit(__I40E_CONFIG_BUSY, &pf->state))
 
 
 
 
 
 
 
 
 
 
1198		usleep_range(1000, 2000);
 
1199
1200	if (!netif_running(vsi->netdev)) {
1201		/* simple case - set for the next time the netdev is started */
1202		for (i = 0; i < vsi->num_queue_pairs; i++) {
1203			vsi->tx_rings[i]->count = new_tx_count;
1204			vsi->rx_rings[i]->count = new_rx_count;
 
 
1205		}
 
 
1206		goto done;
1207	}
1208
1209	/* We can't just free everything and then setup again,
1210	 * because the ISRs in MSI-X mode get passed pointers
1211	 * to the Tx and Rx ring structs.
1212	 */
1213
1214	/* alloc updated Tx resources */
 
 
1215	if (new_tx_count != vsi->tx_rings[0]->count) {
1216		netdev_info(netdev,
1217			    "Changing Tx descriptor count from %d to %d.\n",
1218			    vsi->tx_rings[0]->count, new_tx_count);
1219		tx_rings = kcalloc(vsi->alloc_queue_pairs,
1220				   sizeof(struct i40e_ring), GFP_KERNEL);
1221		if (!tx_rings) {
1222			err = -ENOMEM;
1223			goto done;
1224		}
1225
1226		for (i = 0; i < vsi->num_queue_pairs; i++) {
1227			/* clone ring and setup updated count */
 
 
1228			tx_rings[i] = *vsi->tx_rings[i];
1229			tx_rings[i].count = new_tx_count;
1230			/* the desc and bi pointers will be reallocated in the
1231			 * setup call
1232			 */
1233			tx_rings[i].desc = NULL;
1234			tx_rings[i].rx_bi = NULL;
1235			err = i40e_setup_tx_descriptors(&tx_rings[i]);
1236			if (err) {
1237				while (i) {
1238					i--;
 
 
1239					i40e_free_tx_resources(&tx_rings[i]);
1240				}
1241				kfree(tx_rings);
1242				tx_rings = NULL;
1243
1244				goto done;
1245			}
1246		}
1247	}
1248
1249	/* alloc updated Rx resources */
1250	if (new_rx_count != vsi->rx_rings[0]->count) {
1251		netdev_info(netdev,
1252			    "Changing Rx descriptor count from %d to %d\n",
1253			    vsi->rx_rings[0]->count, new_rx_count);
1254		rx_rings = kcalloc(vsi->alloc_queue_pairs,
1255				   sizeof(struct i40e_ring), GFP_KERNEL);
1256		if (!rx_rings) {
1257			err = -ENOMEM;
1258			goto free_tx;
1259		}
1260
1261		for (i = 0; i < vsi->num_queue_pairs; i++) {
 
 
1262			/* clone ring and setup updated count */
1263			rx_rings[i] = *vsi->rx_rings[i];
1264			rx_rings[i].count = new_rx_count;
1265			/* the desc and bi pointers will be reallocated in the
1266			 * setup call
1267			 */
1268			rx_rings[i].desc = NULL;
1269			rx_rings[i].rx_bi = NULL;
 
 
 
 
 
 
1270			err = i40e_setup_rx_descriptors(&rx_rings[i]);
 
 
 
 
 
 
 
 
 
1271			if (err) {
1272				while (i) {
1273					i--;
1274					i40e_free_rx_resources(&rx_rings[i]);
1275				}
1276				kfree(rx_rings);
1277				rx_rings = NULL;
1278
1279				goto free_tx;
1280			}
1281		}
1282	}
1283
1284	/* Bring interface down, copy in the new ring info,
1285	 * then restore the interface
1286	 */
1287	i40e_down(vsi);
1288
1289	if (tx_rings) {
1290		for (i = 0; i < vsi->num_queue_pairs; i++) {
1291			i40e_free_tx_resources(vsi->tx_rings[i]);
1292			*vsi->tx_rings[i] = tx_rings[i];
 
 
1293		}
1294		kfree(tx_rings);
1295		tx_rings = NULL;
1296	}
1297
1298	if (rx_rings) {
1299		for (i = 0; i < vsi->num_queue_pairs; i++) {
1300			i40e_free_rx_resources(vsi->rx_rings[i]);
 
 
 
 
 
 
 
 
 
 
 
1301			*vsi->rx_rings[i] = rx_rings[i];
1302		}
1303		kfree(rx_rings);
1304		rx_rings = NULL;
1305	}
1306
 
 
1307	i40e_up(vsi);
1308
1309free_tx:
1310	/* error cleanup if the Rx allocations failed after getting Tx */
1311	if (tx_rings) {
1312		for (i = 0; i < vsi->num_queue_pairs; i++)
1313			i40e_free_tx_resources(&tx_rings[i]);
 
 
1314		kfree(tx_rings);
1315		tx_rings = NULL;
1316	}
1317
1318done:
1319	clear_bit(__I40E_CONFIG_BUSY, &pf->state);
1320
1321	return err;
1322}
1323
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1324static int i40e_get_sset_count(struct net_device *netdev, int sset)
1325{
1326	struct i40e_netdev_priv *np = netdev_priv(netdev);
1327	struct i40e_vsi *vsi = np->vsi;
1328	struct i40e_pf *pf = vsi->back;
1329
1330	switch (sset) {
1331	case ETH_SS_TEST:
1332		return I40E_TEST_LEN;
1333	case ETH_SS_STATS:
1334		if (vsi == pf->vsi[pf->lan_vsi] && pf->hw.partition_id == 1) {
1335			int len = I40E_PF_STATS_LEN(netdev);
1336
1337			if ((pf->lan_veb != I40E_NO_VEB) &&
1338			    (pf->flags & I40E_FLAG_VEB_STATS_ENABLED))
1339				len += I40E_VEB_STATS_TOTAL;
1340			return len;
1341		} else {
1342			return I40E_VSI_STATS_LEN(netdev);
1343		}
1344	case ETH_SS_PRIV_FLAGS:
1345		return I40E_PRIV_FLAGS_STR_LEN;
 
1346	default:
1347		return -EOPNOTSUPP;
1348	}
1349}
1350
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1351static void i40e_get_ethtool_stats(struct net_device *netdev,
1352				   struct ethtool_stats *stats, u64 *data)
1353{
1354	struct i40e_netdev_priv *np = netdev_priv(netdev);
1355	struct i40e_ring *tx_ring, *rx_ring;
1356	struct i40e_vsi *vsi = np->vsi;
1357	struct i40e_pf *pf = vsi->back;
1358	int i = 0;
1359	char *p;
1360	int j;
1361	struct rtnl_link_stats64 *net_stats = i40e_get_vsi_stats_struct(vsi);
1362	unsigned int start;
1363
1364	i40e_update_stats(vsi);
1365
1366	for (j = 0; j < I40E_NETDEV_STATS_LEN; j++) {
1367		p = (char *)net_stats + i40e_gstrings_net_stats[j].stat_offset;
1368		data[i++] = (i40e_gstrings_net_stats[j].sizeof_stat ==
1369			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
1370	}
1371	for (j = 0; j < I40E_MISC_STATS_LEN; j++) {
1372		p = (char *)vsi + i40e_gstrings_misc_stats[j].stat_offset;
1373		data[i++] = (i40e_gstrings_misc_stats[j].sizeof_stat ==
1374			    sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
1375	}
1376#ifdef I40E_FCOE
1377	for (j = 0; j < I40E_FCOE_STATS_LEN; j++) {
1378		p = (char *)vsi + i40e_gstrings_fcoe_stats[j].stat_offset;
1379		data[i++] = (i40e_gstrings_fcoe_stats[j].sizeof_stat ==
1380			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
1381	}
1382#endif
1383	rcu_read_lock();
1384	for (j = 0; j < vsi->num_queue_pairs; j++) {
1385		tx_ring = ACCESS_ONCE(vsi->tx_rings[j]);
1386
1387		if (!tx_ring)
1388			continue;
1389
1390		/* process Tx ring statistics */
1391		do {
1392			start = u64_stats_fetch_begin_irq(&tx_ring->syncp);
1393			data[i] = tx_ring->stats.packets;
1394			data[i + 1] = tx_ring->stats.bytes;
1395		} while (u64_stats_fetch_retry_irq(&tx_ring->syncp, start));
1396		i += 2;
1397
1398		/* Rx ring is the 2nd half of the queue pair */
1399		rx_ring = &tx_ring[1];
1400		do {
1401			start = u64_stats_fetch_begin_irq(&rx_ring->syncp);
1402			data[i] = rx_ring->stats.packets;
1403			data[i + 1] = rx_ring->stats.bytes;
1404		} while (u64_stats_fetch_retry_irq(&rx_ring->syncp, start));
1405		i += 2;
1406	}
1407	rcu_read_unlock();
 
1408	if (vsi != pf->vsi[pf->lan_vsi] || pf->hw.partition_id != 1)
1409		return;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1410
1411	if ((pf->lan_veb != I40E_NO_VEB) &&
1412	    (pf->flags & I40E_FLAG_VEB_STATS_ENABLED)) {
1413		struct i40e_veb *veb = pf->veb[pf->lan_veb];
1414
1415		for (j = 0; j < I40E_VEB_STATS_LEN; j++) {
1416			p = (char *)veb;
1417			p += i40e_gstrings_veb_stats[j].stat_offset;
1418			data[i++] = (i40e_gstrings_veb_stats[j].sizeof_stat ==
1419				     sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
1420		}
1421		for (j = 0; j < I40E_MAX_TRAFFIC_CLASS; j++) {
1422			data[i++] = veb->tc_stats.tc_tx_packets[j];
1423			data[i++] = veb->tc_stats.tc_tx_bytes[j];
1424			data[i++] = veb->tc_stats.tc_rx_packets[j];
1425			data[i++] = veb->tc_stats.tc_rx_bytes[j];
1426		}
1427	}
1428	for (j = 0; j < I40E_GLOBAL_STATS_LEN; j++) {
1429		p = (char *)pf + i40e_gstrings_stats[j].stat_offset;
1430		data[i++] = (i40e_gstrings_stats[j].sizeof_stat ==
1431			     sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
1432	}
1433	for (j = 0; j < I40E_MAX_USER_PRIORITY; j++) {
1434		data[i++] = pf->stats.priority_xon_tx[j];
1435		data[i++] = pf->stats.priority_xoff_tx[j];
1436	}
1437	for (j = 0; j < I40E_MAX_USER_PRIORITY; j++) {
1438		data[i++] = pf->stats.priority_xon_rx[j];
1439		data[i++] = pf->stats.priority_xoff_rx[j];
1440	}
1441	for (j = 0; j < I40E_MAX_USER_PRIORITY; j++)
1442		data[i++] = pf->stats.priority_xon_2_xoff[j];
 
 
1443}
1444
1445static void i40e_get_strings(struct net_device *netdev, u32 stringset,
1446			     u8 *data)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1447{
1448	struct i40e_netdev_priv *np = netdev_priv(netdev);
1449	struct i40e_vsi *vsi = np->vsi;
1450	struct i40e_pf *pf = vsi->back;
1451	char *p = (char *)data;
1452	int i;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1453
 
 
 
1454	switch (stringset) {
1455	case ETH_SS_TEST:
1456		for (i = 0; i < I40E_TEST_LEN; i++) {
1457			memcpy(data, i40e_gstrings_test[i], ETH_GSTRING_LEN);
1458			data += ETH_GSTRING_LEN;
1459		}
1460		break;
1461	case ETH_SS_STATS:
1462		for (i = 0; i < I40E_NETDEV_STATS_LEN; i++) {
1463			snprintf(p, ETH_GSTRING_LEN, "%s",
1464				 i40e_gstrings_net_stats[i].stat_string);
1465			p += ETH_GSTRING_LEN;
1466		}
1467		for (i = 0; i < I40E_MISC_STATS_LEN; i++) {
1468			snprintf(p, ETH_GSTRING_LEN, "%s",
1469				 i40e_gstrings_misc_stats[i].stat_string);
1470			p += ETH_GSTRING_LEN;
1471		}
1472#ifdef I40E_FCOE
1473		for (i = 0; i < I40E_FCOE_STATS_LEN; i++) {
1474			snprintf(p, ETH_GSTRING_LEN, "%s",
1475				 i40e_gstrings_fcoe_stats[i].stat_string);
1476			p += ETH_GSTRING_LEN;
1477		}
1478#endif
1479		for (i = 0; i < vsi->num_queue_pairs; i++) {
1480			snprintf(p, ETH_GSTRING_LEN, "tx-%u.tx_packets", i);
1481			p += ETH_GSTRING_LEN;
1482			snprintf(p, ETH_GSTRING_LEN, "tx-%u.tx_bytes", i);
1483			p += ETH_GSTRING_LEN;
1484			snprintf(p, ETH_GSTRING_LEN, "rx-%u.rx_packets", i);
1485			p += ETH_GSTRING_LEN;
1486			snprintf(p, ETH_GSTRING_LEN, "rx-%u.rx_bytes", i);
1487			p += ETH_GSTRING_LEN;
1488		}
1489		if (vsi != pf->vsi[pf->lan_vsi] || pf->hw.partition_id != 1)
1490			return;
1491
1492		if ((pf->lan_veb != I40E_NO_VEB) &&
1493		    (pf->flags & I40E_FLAG_VEB_STATS_ENABLED)) {
1494			for (i = 0; i < I40E_VEB_STATS_LEN; i++) {
1495				snprintf(p, ETH_GSTRING_LEN, "veb.%s",
1496					i40e_gstrings_veb_stats[i].stat_string);
1497				p += ETH_GSTRING_LEN;
1498			}
1499			for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
1500				snprintf(p, ETH_GSTRING_LEN,
1501					 "veb.tc_%u_tx_packets", i);
1502				p += ETH_GSTRING_LEN;
1503				snprintf(p, ETH_GSTRING_LEN,
1504					 "veb.tc_%u_tx_bytes", i);
1505				p += ETH_GSTRING_LEN;
1506				snprintf(p, ETH_GSTRING_LEN,
1507					 "veb.tc_%u_rx_packets", i);
1508				p += ETH_GSTRING_LEN;
1509				snprintf(p, ETH_GSTRING_LEN,
1510					 "veb.tc_%u_rx_bytes", i);
1511				p += ETH_GSTRING_LEN;
1512			}
1513		}
1514		for (i = 0; i < I40E_GLOBAL_STATS_LEN; i++) {
1515			snprintf(p, ETH_GSTRING_LEN, "port.%s",
1516				 i40e_gstrings_stats[i].stat_string);
1517			p += ETH_GSTRING_LEN;
1518		}
1519		for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
1520			snprintf(p, ETH_GSTRING_LEN,
1521				 "port.tx_priority_%u_xon", i);
1522			p += ETH_GSTRING_LEN;
1523			snprintf(p, ETH_GSTRING_LEN,
1524				 "port.tx_priority_%u_xoff", i);
1525			p += ETH_GSTRING_LEN;
1526		}
1527		for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
1528			snprintf(p, ETH_GSTRING_LEN,
1529				 "port.rx_priority_%u_xon", i);
1530			p += ETH_GSTRING_LEN;
1531			snprintf(p, ETH_GSTRING_LEN,
1532				 "port.rx_priority_%u_xoff", i);
1533			p += ETH_GSTRING_LEN;
1534		}
1535		for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
1536			snprintf(p, ETH_GSTRING_LEN,
1537				 "port.rx_priority_%u_xon_2_xoff", i);
1538			p += ETH_GSTRING_LEN;
1539		}
1540		/* BUG_ON(p - data != I40E_STATS_LEN * ETH_GSTRING_LEN); */
1541		break;
1542	case ETH_SS_PRIV_FLAGS:
1543		for (i = 0; i < I40E_PRIV_FLAGS_STR_LEN; i++) {
1544			memcpy(data, i40e_priv_flags_strings[i],
1545			       ETH_GSTRING_LEN);
1546			data += ETH_GSTRING_LEN;
1547		}
1548		break;
1549	default:
1550		break;
1551	}
1552}
1553
1554static int i40e_get_ts_info(struct net_device *dev,
1555			    struct ethtool_ts_info *info)
1556{
1557	struct i40e_pf *pf = i40e_netdev_to_pf(dev);
1558
1559	/* only report HW timestamping if PTP is enabled */
1560	if (!(pf->flags & I40E_FLAG_PTP))
1561		return ethtool_op_get_ts_info(dev, info);
1562
1563	info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE |
1564				SOF_TIMESTAMPING_RX_SOFTWARE |
1565				SOF_TIMESTAMPING_SOFTWARE |
1566				SOF_TIMESTAMPING_TX_HARDWARE |
1567				SOF_TIMESTAMPING_RX_HARDWARE |
1568				SOF_TIMESTAMPING_RAW_HARDWARE;
1569
1570	if (pf->ptp_clock)
1571		info->phc_index = ptp_clock_index(pf->ptp_clock);
1572	else
1573		info->phc_index = -1;
1574
1575	info->tx_types = BIT(HWTSTAMP_TX_OFF) | BIT(HWTSTAMP_TX_ON);
1576
1577	info->rx_filters = BIT(HWTSTAMP_FILTER_NONE) |
1578			   BIT(HWTSTAMP_FILTER_PTP_V1_L4_EVENT) |
1579			   BIT(HWTSTAMP_FILTER_PTP_V2_EVENT);
 
 
 
 
 
 
 
 
 
 
 
1580
1581	return 0;
1582}
1583
1584static int i40e_link_test(struct net_device *netdev, u64 *data)
1585{
1586	struct i40e_netdev_priv *np = netdev_priv(netdev);
1587	struct i40e_pf *pf = np->vsi->back;
1588	i40e_status status;
1589	bool link_up = false;
1590
1591	netif_info(pf, hw, netdev, "link test\n");
1592	status = i40e_get_link_status(&pf->hw, &link_up);
1593	if (status) {
1594		netif_err(pf, drv, netdev, "link query timed out, please retry test\n");
1595		*data = 1;
1596		return *data;
1597	}
1598
1599	if (link_up)
1600		*data = 0;
1601	else
1602		*data = 1;
1603
1604	return *data;
1605}
1606
1607static int i40e_reg_test(struct net_device *netdev, u64 *data)
1608{
1609	struct i40e_netdev_priv *np = netdev_priv(netdev);
1610	struct i40e_pf *pf = np->vsi->back;
1611
1612	netif_info(pf, hw, netdev, "register test\n");
1613	*data = i40e_diag_reg_test(&pf->hw);
1614
1615	return *data;
1616}
1617
1618static int i40e_eeprom_test(struct net_device *netdev, u64 *data)
1619{
1620	struct i40e_netdev_priv *np = netdev_priv(netdev);
1621	struct i40e_pf *pf = np->vsi->back;
1622
1623	netif_info(pf, hw, netdev, "eeprom test\n");
1624	*data = i40e_diag_eeprom_test(&pf->hw);
1625
1626	/* forcebly clear the NVM Update state machine */
1627	pf->hw.nvmupd_state = I40E_NVMUPD_STATE_INIT;
1628
1629	return *data;
1630}
1631
1632static int i40e_intr_test(struct net_device *netdev, u64 *data)
1633{
1634	struct i40e_netdev_priv *np = netdev_priv(netdev);
1635	struct i40e_pf *pf = np->vsi->back;
1636	u16 swc_old = pf->sw_int_count;
1637
1638	netif_info(pf, hw, netdev, "interrupt test\n");
1639	wr32(&pf->hw, I40E_PFINT_DYN_CTL0,
1640	     (I40E_PFINT_DYN_CTL0_INTENA_MASK |
1641	      I40E_PFINT_DYN_CTL0_SWINT_TRIG_MASK |
1642	      I40E_PFINT_DYN_CTL0_ITR_INDX_MASK |
1643	      I40E_PFINT_DYN_CTL0_SW_ITR_INDX_ENA_MASK |
1644	      I40E_PFINT_DYN_CTL0_SW_ITR_INDX_MASK));
1645	usleep_range(1000, 2000);
1646	*data = (swc_old == pf->sw_int_count);
1647
1648	return *data;
1649}
1650
1651static int i40e_loopback_test(struct net_device *netdev, u64 *data)
1652{
1653	struct i40e_netdev_priv *np = netdev_priv(netdev);
1654	struct i40e_pf *pf = np->vsi->back;
1655
1656	netif_info(pf, hw, netdev, "loopback test not implemented\n");
1657	*data = 0;
1658
1659	return *data;
1660}
1661
1662static inline bool i40e_active_vfs(struct i40e_pf *pf)
1663{
1664	struct i40e_vf *vfs = pf->vf;
1665	int i;
1666
1667	for (i = 0; i < pf->num_alloc_vfs; i++)
1668		if (test_bit(I40E_VF_STAT_ACTIVE, &vfs[i].vf_states))
1669			return true;
1670	return false;
1671}
1672
1673static inline bool i40e_active_vmdqs(struct i40e_pf *pf)
1674{
1675	struct i40e_vsi **vsi = pf->vsi;
1676	int i;
1677
1678	for (i = 0; i < pf->num_alloc_vsi; i++) {
1679		if (!vsi[i])
1680			continue;
1681		if (vsi[i]->type == I40E_VSI_VMDQ2)
1682			return true;
1683	}
1684
1685	return false;
1686}
1687
1688static void i40e_diag_test(struct net_device *netdev,
1689			   struct ethtool_test *eth_test, u64 *data)
1690{
1691	struct i40e_netdev_priv *np = netdev_priv(netdev);
1692	bool if_running = netif_running(netdev);
1693	struct i40e_pf *pf = np->vsi->back;
1694
1695	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
1696		/* Offline tests */
1697		netif_info(pf, drv, netdev, "offline testing starting\n");
1698
1699		set_bit(__I40E_TESTING, &pf->state);
1700
1701		if (i40e_active_vfs(pf) || i40e_active_vmdqs(pf)) {
1702			dev_warn(&pf->pdev->dev,
1703				 "Please take active VFs and Netqueues offline and restart the adapter before running NIC diagnostics\n");
1704			data[I40E_ETH_TEST_REG]		= 1;
1705			data[I40E_ETH_TEST_EEPROM]	= 1;
1706			data[I40E_ETH_TEST_INTR]	= 1;
1707			data[I40E_ETH_TEST_LOOPBACK]	= 1;
1708			data[I40E_ETH_TEST_LINK]	= 1;
1709			eth_test->flags |= ETH_TEST_FL_FAILED;
1710			clear_bit(__I40E_TESTING, &pf->state);
1711			goto skip_ol_tests;
1712		}
1713
1714		/* If the device is online then take it offline */
1715		if (if_running)
1716			/* indicate we're in test mode */
1717			dev_close(netdev);
1718		else
1719			/* This reset does not affect link - if it is
1720			 * changed to a type of reset that does affect
1721			 * link then the following link test would have
1722			 * to be moved to before the reset
1723			 */
1724			i40e_do_reset(pf, BIT(__I40E_PF_RESET_REQUESTED));
1725
1726		if (i40e_link_test(netdev, &data[I40E_ETH_TEST_LINK]))
1727			eth_test->flags |= ETH_TEST_FL_FAILED;
1728
1729		if (i40e_eeprom_test(netdev, &data[I40E_ETH_TEST_EEPROM]))
1730			eth_test->flags |= ETH_TEST_FL_FAILED;
1731
1732		if (i40e_intr_test(netdev, &data[I40E_ETH_TEST_INTR]))
1733			eth_test->flags |= ETH_TEST_FL_FAILED;
1734
1735		if (i40e_loopback_test(netdev, &data[I40E_ETH_TEST_LOOPBACK]))
1736			eth_test->flags |= ETH_TEST_FL_FAILED;
1737
1738		/* run reg test last, a reset is required after it */
1739		if (i40e_reg_test(netdev, &data[I40E_ETH_TEST_REG]))
1740			eth_test->flags |= ETH_TEST_FL_FAILED;
1741
1742		clear_bit(__I40E_TESTING, &pf->state);
1743		i40e_do_reset(pf, BIT(__I40E_PF_RESET_REQUESTED));
1744
1745		if (if_running)
1746			dev_open(netdev);
1747	} else {
1748		/* Online tests */
1749		netif_info(pf, drv, netdev, "online testing starting\n");
1750
1751		if (i40e_link_test(netdev, &data[I40E_ETH_TEST_LINK]))
1752			eth_test->flags |= ETH_TEST_FL_FAILED;
1753
1754		/* Offline only tests, not run in online; pass by default */
1755		data[I40E_ETH_TEST_REG] = 0;
1756		data[I40E_ETH_TEST_EEPROM] = 0;
1757		data[I40E_ETH_TEST_INTR] = 0;
1758		data[I40E_ETH_TEST_LOOPBACK] = 0;
1759	}
1760
1761skip_ol_tests:
1762
1763	netif_info(pf, drv, netdev, "testing finished\n");
1764}
1765
1766static void i40e_get_wol(struct net_device *netdev,
1767			 struct ethtool_wolinfo *wol)
1768{
1769	struct i40e_netdev_priv *np = netdev_priv(netdev);
1770	struct i40e_pf *pf = np->vsi->back;
1771	struct i40e_hw *hw = &pf->hw;
1772	u16 wol_nvm_bits;
1773
1774	/* NVM bit on means WoL disabled for the port */
1775	i40e_read_nvm_word(hw, I40E_SR_NVM_WAKE_ON_LAN, &wol_nvm_bits);
1776	if ((BIT(hw->port) & wol_nvm_bits) || (hw->partition_id != 1)) {
1777		wol->supported = 0;
1778		wol->wolopts = 0;
1779	} else {
1780		wol->supported = WAKE_MAGIC;
1781		wol->wolopts = (pf->wol_en ? WAKE_MAGIC : 0);
1782	}
1783}
1784
1785/**
1786 * i40e_set_wol - set the WakeOnLAN configuration
1787 * @netdev: the netdev in question
1788 * @wol: the ethtool WoL setting data
1789 **/
1790static int i40e_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
1791{
1792	struct i40e_netdev_priv *np = netdev_priv(netdev);
1793	struct i40e_pf *pf = np->vsi->back;
1794	struct i40e_vsi *vsi = np->vsi;
1795	struct i40e_hw *hw = &pf->hw;
1796	u16 wol_nvm_bits;
1797
1798	/* WoL not supported if this isn't the controlling PF on the port */
1799	if (hw->partition_id != 1) {
1800		i40e_partition_setting_complaint(pf);
1801		return -EOPNOTSUPP;
1802	}
1803
1804	if (vsi != pf->vsi[pf->lan_vsi])
1805		return -EOPNOTSUPP;
1806
1807	/* NVM bit on means WoL disabled for the port */
1808	i40e_read_nvm_word(hw, I40E_SR_NVM_WAKE_ON_LAN, &wol_nvm_bits);
1809	if (BIT(hw->port) & wol_nvm_bits)
1810		return -EOPNOTSUPP;
1811
1812	/* only magic packet is supported */
1813	if (wol->wolopts && (wol->wolopts != WAKE_MAGIC))
1814		return -EOPNOTSUPP;
1815
1816	/* is this a new value? */
1817	if (pf->wol_en != !!wol->wolopts) {
1818		pf->wol_en = !!wol->wolopts;
1819		device_set_wakeup_enable(&pf->pdev->dev, pf->wol_en);
1820	}
1821
1822	return 0;
1823}
1824
1825static int i40e_set_phys_id(struct net_device *netdev,
1826			    enum ethtool_phys_id_state state)
1827{
1828	struct i40e_netdev_priv *np = netdev_priv(netdev);
1829	i40e_status ret = 0;
1830	struct i40e_pf *pf = np->vsi->back;
1831	struct i40e_hw *hw = &pf->hw;
1832	int blink_freq = 2;
1833	u16 temp_status;
1834
1835	switch (state) {
1836	case ETHTOOL_ID_ACTIVE:
1837		if (!(pf->flags & I40E_FLAG_HAVE_10GBASET_PHY)) {
1838			pf->led_status = i40e_led_get(hw);
1839		} else {
1840			i40e_aq_set_phy_debug(hw, I40E_PHY_DEBUG_PORT, NULL);
 
 
1841			ret = i40e_led_get_phy(hw, &temp_status,
1842					       &pf->phy_led_val);
1843			pf->led_status = temp_status;
1844		}
1845		return blink_freq;
1846	case ETHTOOL_ID_ON:
1847		if (!(pf->flags & I40E_FLAG_HAVE_10GBASET_PHY))
1848			i40e_led_set(hw, 0xf, false);
1849		else
1850			ret = i40e_led_set_phy(hw, true, pf->led_status, 0);
1851		break;
1852	case ETHTOOL_ID_OFF:
1853		if (!(pf->flags & I40E_FLAG_HAVE_10GBASET_PHY))
1854			i40e_led_set(hw, 0x0, false);
1855		else
1856			ret = i40e_led_set_phy(hw, false, pf->led_status, 0);
1857		break;
1858	case ETHTOOL_ID_INACTIVE:
1859		if (!(pf->flags & I40E_FLAG_HAVE_10GBASET_PHY)) {
1860			i40e_led_set(hw, false, pf->led_status);
1861		} else {
1862			ret = i40e_led_set_phy(hw, false, pf->led_status,
1863					       (pf->phy_led_val |
1864					       I40E_PHY_LED_MODE_ORIG));
1865			i40e_aq_set_phy_debug(hw, 0, NULL);
 
1866		}
1867		break;
1868	default:
1869		break;
1870	}
1871		if (ret)
1872			return -ENOENT;
1873		else
1874			return 0;
1875}
1876
1877/* NOTE: i40e hardware uses a conversion factor of 2 for Interrupt
1878 * Throttle Rate (ITR) ie. ITR(1) = 2us ITR(10) = 20 us, and also
1879 * 125us (8000 interrupts per second) == ITR(62)
1880 */
1881
 
 
 
 
 
 
 
 
 
 
1882static int __i40e_get_coalesce(struct net_device *netdev,
1883			       struct ethtool_coalesce *ec,
1884			       int queue)
1885{
1886	struct i40e_netdev_priv *np = netdev_priv(netdev);
 
1887	struct i40e_vsi *vsi = np->vsi;
1888
1889	ec->tx_max_coalesced_frames_irq = vsi->work_limit;
1890	ec->rx_max_coalesced_frames_irq = vsi->work_limit;
1891
1892	/* rx and tx usecs has per queue value. If user doesn't specify the queue,
1893	 * return queue 0's value to represent.
1894	 */
1895	if (queue < 0) {
1896		queue = 0;
1897	} else if (queue >= vsi->num_queue_pairs) {
1898		return -EINVAL;
1899	}
1900
1901	if (ITR_IS_DYNAMIC(vsi->rx_rings[queue]->rx_itr_setting))
 
 
 
1902		ec->use_adaptive_rx_coalesce = 1;
1903
1904	if (ITR_IS_DYNAMIC(vsi->tx_rings[queue]->tx_itr_setting))
1905		ec->use_adaptive_tx_coalesce = 1;
1906
1907	ec->rx_coalesce_usecs = vsi->rx_rings[queue]->rx_itr_setting & ~I40E_ITR_DYNAMIC;
1908	ec->tx_coalesce_usecs = vsi->tx_rings[queue]->tx_itr_setting & ~I40E_ITR_DYNAMIC;
1909
1910	/* we use the _usecs_high to store/set the interrupt rate limit
1911	 * that the hardware supports, that almost but not quite
1912	 * fits the original intent of the ethtool variable,
1913	 * the rx_coalesce_usecs_high limits total interrupts
1914	 * per second from both tx/rx sources.
1915	 */
1916	ec->rx_coalesce_usecs_high = vsi->int_rate_limit;
1917	ec->tx_coalesce_usecs_high = vsi->int_rate_limit;
1918
1919	return 0;
1920}
1921
 
 
 
 
 
 
 
 
 
1922static int i40e_get_coalesce(struct net_device *netdev,
1923			     struct ethtool_coalesce *ec)
1924{
1925	return __i40e_get_coalesce(netdev, ec, -1);
1926}
1927
 
 
 
 
 
 
 
 
1928static int i40e_get_per_queue_coalesce(struct net_device *netdev, u32 queue,
1929				       struct ethtool_coalesce *ec)
1930{
1931	return __i40e_get_coalesce(netdev, ec, queue);
1932}
1933
 
 
 
 
 
 
 
 
1934static void i40e_set_itr_per_queue(struct i40e_vsi *vsi,
1935				   struct ethtool_coalesce *ec,
1936				   int queue)
1937{
 
 
1938	struct i40e_pf *pf = vsi->back;
1939	struct i40e_hw *hw = &pf->hw;
1940	struct i40e_q_vector *q_vector;
1941	u16 vector, intrl;
1942
1943	intrl = INTRL_USEC_TO_REG(vsi->int_rate_limit);
1944
1945	vsi->rx_rings[queue]->rx_itr_setting = ec->rx_coalesce_usecs;
1946	vsi->tx_rings[queue]->tx_itr_setting = ec->tx_coalesce_usecs;
1947
1948	if (ec->use_adaptive_rx_coalesce)
1949		vsi->rx_rings[queue]->rx_itr_setting |= I40E_ITR_DYNAMIC;
1950	else
1951		vsi->rx_rings[queue]->rx_itr_setting &= ~I40E_ITR_DYNAMIC;
1952
1953	if (ec->use_adaptive_tx_coalesce)
1954		vsi->tx_rings[queue]->tx_itr_setting |= I40E_ITR_DYNAMIC;
1955	else
1956		vsi->tx_rings[queue]->tx_itr_setting &= ~I40E_ITR_DYNAMIC;
1957
1958	q_vector = vsi->rx_rings[queue]->q_vector;
1959	q_vector->rx.itr = ITR_TO_REG(vsi->rx_rings[queue]->rx_itr_setting);
1960	vector = vsi->base_vector + q_vector->v_idx;
1961	wr32(hw, I40E_PFINT_ITRN(I40E_RX_ITR, vector - 1), q_vector->rx.itr);
1962
1963	q_vector = vsi->tx_rings[queue]->q_vector;
1964	q_vector->tx.itr = ITR_TO_REG(vsi->tx_rings[queue]->tx_itr_setting);
1965	vector = vsi->base_vector + q_vector->v_idx;
1966	wr32(hw, I40E_PFINT_ITRN(I40E_TX_ITR, vector - 1), q_vector->tx.itr);
 
 
 
1967
1968	wr32(hw, I40E_PFINT_RATEN(vector - 1), intrl);
1969	i40e_flush(hw);
1970}
1971
 
 
 
 
 
 
 
 
1972static int __i40e_set_coalesce(struct net_device *netdev,
1973			       struct ethtool_coalesce *ec,
1974			       int queue)
1975{
1976	struct i40e_netdev_priv *np = netdev_priv(netdev);
 
1977	struct i40e_vsi *vsi = np->vsi;
1978	struct i40e_pf *pf = vsi->back;
1979	int i;
1980
1981	if (ec->tx_max_coalesced_frames_irq || ec->rx_max_coalesced_frames_irq)
1982		vsi->work_limit = ec->tx_max_coalesced_frames_irq;
1983
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1984	/* tx_coalesce_usecs_high is ignored, use rx-usecs-high instead */
1985	if (ec->tx_coalesce_usecs_high != vsi->int_rate_limit) {
1986		netif_info(pf, drv, netdev, "tx-usecs-high is not used, please program rx-usecs-high\n");
1987		return -EINVAL;
1988	}
1989
1990	if (ec->rx_coalesce_usecs_high >= INTRL_REG_TO_USEC(I40E_MAX_INTRL)) {
1991		netif_info(pf, drv, netdev, "Invalid value, rx-usecs-high range is 0-235\n");
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1992		return -EINVAL;
1993	}
1994
1995	if (ec->rx_coalesce_usecs == 0) {
1996		if (ec->use_adaptive_rx_coalesce)
1997			netif_info(pf, drv, netdev, "rx-usecs=0, need to disable adaptive-rx for a complete disable\n");
1998	} else if ((ec->rx_coalesce_usecs < (I40E_MIN_ITR << 1)) ||
1999		   (ec->rx_coalesce_usecs > (I40E_MAX_ITR << 1))) {
2000			netif_info(pf, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n");
2001			return -EINVAL;
2002	}
2003
2004	vsi->int_rate_limit = ec->rx_coalesce_usecs_high;
 
2005
2006	if (ec->tx_coalesce_usecs == 0) {
2007		if (ec->use_adaptive_tx_coalesce)
2008			netif_info(pf, drv, netdev, "tx-usecs=0, need to disable adaptive-tx for a complete disable\n");
2009	} else if ((ec->tx_coalesce_usecs < (I40E_MIN_ITR << 1)) ||
2010		   (ec->tx_coalesce_usecs > (I40E_MAX_ITR << 1))) {
2011			netif_info(pf, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n");
2012			return -EINVAL;
 
2013	}
2014
2015	/* rx and tx usecs has per queue value. If user doesn't specify the queue,
2016	 * apply to all queues.
2017	 */
2018	if (queue < 0) {
2019		for (i = 0; i < vsi->num_queue_pairs; i++)
2020			i40e_set_itr_per_queue(vsi, ec, i);
2021	} else if (queue < vsi->num_queue_pairs) {
2022		i40e_set_itr_per_queue(vsi, ec, queue);
2023	} else {
2024		netif_info(pf, drv, netdev, "Invalid queue value, queue range is 0 - %d\n",
2025			   vsi->num_queue_pairs - 1);
2026		return -EINVAL;
2027	}
2028
2029	return 0;
2030}
2031
 
 
 
 
 
 
 
2032static int i40e_set_coalesce(struct net_device *netdev,
2033			     struct ethtool_coalesce *ec)
2034{
2035	return __i40e_set_coalesce(netdev, ec, -1);
2036}
2037
 
 
 
 
 
 
 
 
2038static int i40e_set_per_queue_coalesce(struct net_device *netdev, u32 queue,
2039				       struct ethtool_coalesce *ec)
2040{
2041	return __i40e_set_coalesce(netdev, ec, queue);
2042}
2043
2044/**
2045 * i40e_get_rss_hash_opts - Get RSS hash Input Set for each flow type
2046 * @pf: pointer to the physical function struct
2047 * @cmd: ethtool rxnfc command
2048 *
2049 * Returns Success if the flow is supported, else Invalid Input.
2050 **/
2051static int i40e_get_rss_hash_opts(struct i40e_pf *pf, struct ethtool_rxnfc *cmd)
2052{
 
 
 
 
2053	cmd->data = 0;
2054
2055	if (pf->vsi[pf->lan_vsi]->rxnfc.data != 0) {
2056		cmd->data = pf->vsi[pf->lan_vsi]->rxnfc.data;
2057		cmd->flow_type = pf->vsi[pf->lan_vsi]->rxnfc.flow_type;
2058		return 0;
2059	}
2060	/* Report default options for RSS on i40e */
2061	switch (cmd->flow_type) {
2062	case TCP_V4_FLOW:
 
 
2063	case UDP_V4_FLOW:
2064		cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
2065	/* fall through to add IP fields */
 
 
 
 
 
 
2066	case SCTP_V4_FLOW:
2067	case AH_ESP_V4_FLOW:
2068	case AH_V4_FLOW:
2069	case ESP_V4_FLOW:
2070	case IPV4_FLOW:
2071		cmd->data |= RXH_IP_SRC | RXH_IP_DST;
2072		break;
2073	case TCP_V6_FLOW:
2074	case UDP_V6_FLOW:
2075		cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
2076	/* fall through to add IP fields */
2077	case SCTP_V6_FLOW:
2078	case AH_ESP_V6_FLOW:
2079	case AH_V6_FLOW:
2080	case ESP_V6_FLOW:
2081	case IPV6_FLOW:
 
2082		cmd->data |= RXH_IP_SRC | RXH_IP_DST;
2083		break;
2084	default:
2085		return -EINVAL;
2086	}
2087
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2088	return 0;
2089}
2090
2091/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2092 * i40e_get_ethtool_fdir_all - Populates the rule count of a command
2093 * @pf: Pointer to the physical function struct
2094 * @cmd: The command to get or set Rx flow classification rules
2095 * @rule_locs: Array of used rule locations
2096 *
2097 * This function populates both the total and actual rule count of
2098 * the ethtool flow classification command
2099 *
2100 * Returns 0 on success or -EMSGSIZE if entry not found
2101 **/
2102static int i40e_get_ethtool_fdir_all(struct i40e_pf *pf,
2103				     struct ethtool_rxnfc *cmd,
2104				     u32 *rule_locs)
2105{
2106	struct i40e_fdir_filter *rule;
2107	struct hlist_node *node2;
2108	int cnt = 0;
2109
2110	/* report total rule count */
2111	cmd->data = i40e_get_fd_cnt_all(pf);
2112
2113	hlist_for_each_entry_safe(rule, node2,
2114				  &pf->fdir_filter_list, fdir_node) {
2115		if (cnt == cmd->rule_cnt)
2116			return -EMSGSIZE;
2117
2118		rule_locs[cnt] = rule->fd_id;
2119		cnt++;
2120	}
2121
2122	cmd->rule_cnt = cnt;
2123
2124	return 0;
2125}
2126
2127/**
2128 * i40e_get_ethtool_fdir_entry - Look up a filter based on Rx flow
2129 * @pf: Pointer to the physical function struct
2130 * @cmd: The command to get or set Rx flow classification rules
2131 *
2132 * This function looks up a filter based on the Rx flow classification
2133 * command and fills the flow spec info for it if found
2134 *
2135 * Returns 0 on success or -EINVAL if filter not found
2136 **/
2137static int i40e_get_ethtool_fdir_entry(struct i40e_pf *pf,
2138				       struct ethtool_rxnfc *cmd)
2139{
2140	struct ethtool_rx_flow_spec *fsp =
2141			(struct ethtool_rx_flow_spec *)&cmd->fs;
 
2142	struct i40e_fdir_filter *rule = NULL;
2143	struct hlist_node *node2;
 
 
2144
2145	hlist_for_each_entry_safe(rule, node2,
2146				  &pf->fdir_filter_list, fdir_node) {
2147		if (fsp->location <= rule->fd_id)
2148			break;
2149	}
2150
2151	if (!rule || fsp->location != rule->fd_id)
2152		return -EINVAL;
2153
2154	fsp->flow_type = rule->flow_type;
2155	if (fsp->flow_type == IP_USER_FLOW) {
2156		fsp->h_u.usr_ip4_spec.ip_ver = ETH_RX_NFC_IP4;
2157		fsp->h_u.usr_ip4_spec.proto = 0;
2158		fsp->m_u.usr_ip4_spec.proto = 0;
2159	}
2160
2161	/* Reverse the src and dest notion, since the HW views them from
2162	 * Tx perspective where as the user expects it from Rx filter view.
2163	 */
2164	fsp->h_u.tcp_ip4_spec.psrc = rule->dst_port;
2165	fsp->h_u.tcp_ip4_spec.pdst = rule->src_port;
2166	fsp->h_u.tcp_ip4_spec.ip4src = rule->dst_ip[0];
2167	fsp->h_u.tcp_ip4_spec.ip4dst = rule->src_ip[0];
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2168
2169	if (rule->dest_ctl == I40E_FILTER_PROGRAM_DESC_DEST_DROP_PACKET)
2170		fsp->ring_cookie = RX_CLS_FLOW_DISC;
2171	else
2172		fsp->ring_cookie = rule->q_index;
2173
2174	if (rule->dest_vsi != pf->vsi[pf->lan_vsi]->id) {
2175		struct i40e_vsi *vsi;
2176
2177		vsi = i40e_find_vsi_from_id(pf, rule->dest_vsi);
2178		if (vsi && vsi->type == I40E_VSI_SRIOV) {
2179			fsp->h_ext.data[1] = htonl(vsi->vf_id);
2180			fsp->m_ext.data[1] = htonl(0x1);
 
 
 
 
 
2181		}
2182	}
2183
 
 
 
 
 
 
 
 
2184	return 0;
2185}
2186
2187/**
2188 * i40e_get_rxnfc - command to get RX flow classification rules
2189 * @netdev: network interface device structure
2190 * @cmd: ethtool rxnfc command
 
2191 *
2192 * Returns Success if the command is supported.
2193 **/
2194static int i40e_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd,
2195			  u32 *rule_locs)
2196{
2197	struct i40e_netdev_priv *np = netdev_priv(netdev);
2198	struct i40e_vsi *vsi = np->vsi;
2199	struct i40e_pf *pf = vsi->back;
2200	int ret = -EOPNOTSUPP;
2201
2202	switch (cmd->cmd) {
2203	case ETHTOOL_GRXRINGS:
2204		cmd->data = vsi->num_queue_pairs;
2205		ret = 0;
2206		break;
2207	case ETHTOOL_GRXFH:
2208		ret = i40e_get_rss_hash_opts(pf, cmd);
2209		break;
2210	case ETHTOOL_GRXCLSRLCNT:
2211		cmd->rule_cnt = pf->fdir_pf_active_filters;
2212		/* report total rule count */
2213		cmd->data = i40e_get_fd_cnt_all(pf);
2214		ret = 0;
2215		break;
2216	case ETHTOOL_GRXCLSRULE:
2217		ret = i40e_get_ethtool_fdir_entry(pf, cmd);
2218		break;
2219	case ETHTOOL_GRXCLSRLALL:
2220		ret = i40e_get_ethtool_fdir_all(pf, cmd, rule_locs);
2221		break;
2222	default:
2223		break;
2224	}
2225
2226	return ret;
2227}
2228
2229/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2230 * i40e_set_rss_hash_opt - Enable/Disable flow types for RSS hash
2231 * @pf: pointer to the physical function struct
2232 * @cmd: ethtool rxnfc command
2233 *
2234 * Returns Success if the flow input set is supported.
2235 **/
2236static int i40e_set_rss_hash_opt(struct i40e_pf *pf, struct ethtool_rxnfc *nfc)
2237{
2238	struct i40e_hw *hw = &pf->hw;
2239	u64 hena = (u64)i40e_read_rx_ctl(hw, I40E_PFQF_HENA(0)) |
2240		   ((u64)i40e_read_rx_ctl(hw, I40E_PFQF_HENA(1)) << 32);
 
 
 
 
 
 
 
 
2241
2242	/* RSS does not support anything other than hashing
2243	 * to queues on src and dst IPs and ports
2244	 */
2245	if (nfc->data & ~(RXH_IP_SRC | RXH_IP_DST |
2246			  RXH_L4_B_0_1 | RXH_L4_B_2_3))
2247		return -EINVAL;
2248
2249	/* We need at least the IP SRC and DEST fields for hashing */
2250	if (!(nfc->data & RXH_IP_SRC) ||
2251	    !(nfc->data & RXH_IP_DST))
2252		return -EINVAL;
2253
2254	switch (nfc->flow_type) {
2255	case TCP_V4_FLOW:
2256		switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) {
2257		case 0:
2258			return -EINVAL;
2259		case (RXH_L4_B_0_1 | RXH_L4_B_2_3):
2260			if (pf->flags & I40E_FLAG_MULTIPLE_TCP_UDP_RSS_PCTYPE)
2261				hena |=
2262			   BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_TCP_SYN_NO_ACK);
2263
2264			hena |= BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_TCP);
2265			break;
2266		default:
2267			return -EINVAL;
2268		}
2269		break;
2270	case TCP_V6_FLOW:
2271		switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) {
2272		case 0:
2273			return -EINVAL;
2274		case (RXH_L4_B_0_1 | RXH_L4_B_2_3):
2275			if (pf->flags & I40E_FLAG_MULTIPLE_TCP_UDP_RSS_PCTYPE)
2276				hena |=
2277			   BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_TCP_SYN_NO_ACK);
2278
2279			hena |= BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_TCP);
2280			break;
2281		default:
2282			return -EINVAL;
2283		}
2284		break;
2285	case UDP_V4_FLOW:
2286		switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) {
2287		case 0:
2288			return -EINVAL;
2289		case (RXH_L4_B_0_1 | RXH_L4_B_2_3):
2290			if (pf->flags & I40E_FLAG_MULTIPLE_TCP_UDP_RSS_PCTYPE)
2291				hena |=
2292			    BIT_ULL(I40E_FILTER_PCTYPE_NONF_UNICAST_IPV4_UDP) |
2293			    BIT_ULL(I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV4_UDP);
2294
2295			hena |= (BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_UDP) |
2296				 BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV4));
2297			break;
2298		default:
2299			return -EINVAL;
2300		}
2301		break;
2302	case UDP_V6_FLOW:
2303		switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) {
2304		case 0:
2305			return -EINVAL;
2306		case (RXH_L4_B_0_1 | RXH_L4_B_2_3):
2307			if (pf->flags & I40E_FLAG_MULTIPLE_TCP_UDP_RSS_PCTYPE)
2308				hena |=
2309			    BIT_ULL(I40E_FILTER_PCTYPE_NONF_UNICAST_IPV6_UDP) |
2310			    BIT_ULL(I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV6_UDP);
2311
2312			hena |= (BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_UDP) |
2313				 BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV6));
2314			break;
2315		default:
2316			return -EINVAL;
2317		}
2318		break;
2319	case AH_ESP_V4_FLOW:
2320	case AH_V4_FLOW:
2321	case ESP_V4_FLOW:
2322	case SCTP_V4_FLOW:
2323		if ((nfc->data & RXH_L4_B_0_1) ||
2324		    (nfc->data & RXH_L4_B_2_3))
2325			return -EINVAL;
2326		hena |= BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_OTHER);
2327		break;
2328	case AH_ESP_V6_FLOW:
2329	case AH_V6_FLOW:
2330	case ESP_V6_FLOW:
2331	case SCTP_V6_FLOW:
2332		if ((nfc->data & RXH_L4_B_0_1) ||
2333		    (nfc->data & RXH_L4_B_2_3))
2334			return -EINVAL;
2335		hena |= BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_OTHER);
2336		break;
2337	case IPV4_FLOW:
2338		hena |= BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_OTHER) |
2339			BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV4);
2340		break;
2341	case IPV6_FLOW:
2342		hena |= BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_OTHER) |
2343			BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV6);
2344		break;
2345	default:
2346		return -EINVAL;
2347	}
2348
 
 
 
 
 
 
 
 
 
 
 
 
 
2349	i40e_write_rx_ctl(hw, I40E_PFQF_HENA(0), (u32)hena);
2350	i40e_write_rx_ctl(hw, I40E_PFQF_HENA(1), (u32)(hena >> 32));
2351	i40e_flush(hw);
2352
2353	/* Save setting for future output/update */
2354	pf->vsi[pf->lan_vsi]->rxnfc = *nfc;
2355
2356	return 0;
2357}
2358
2359/**
2360 * i40e_match_fdir_input_set - Match a new filter against an existing one
2361 * @rule: The filter already added
2362 * @input: The new filter to comapre against
2363 *
2364 * Returns true if the two input set match
2365 **/
2366static bool i40e_match_fdir_input_set(struct i40e_fdir_filter *rule,
2367				      struct i40e_fdir_filter *input)
2368{
2369	if ((rule->dst_ip[0] != input->dst_ip[0]) ||
2370	    (rule->src_ip[0] != input->src_ip[0]) ||
2371	    (rule->dst_port != input->dst_port) ||
2372	    (rule->src_port != input->src_port))
2373		return false;
2374	return true;
2375}
2376
2377/**
2378 * i40e_update_ethtool_fdir_entry - Updates the fdir filter entry
2379 * @vsi: Pointer to the targeted VSI
2380 * @input: The filter to update or NULL to indicate deletion
2381 * @sw_idx: Software index to the filter
2382 * @cmd: The command to get or set Rx flow classification rules
2383 *
2384 * This function updates (or deletes) a Flow Director entry from
2385 * the hlist of the corresponding PF
2386 *
2387 * Returns 0 on success
2388 **/
2389static int i40e_update_ethtool_fdir_entry(struct i40e_vsi *vsi,
2390					  struct i40e_fdir_filter *input,
2391					  u16 sw_idx,
2392					  struct ethtool_rxnfc *cmd)
2393{
2394	struct i40e_fdir_filter *rule, *parent;
2395	struct i40e_pf *pf = vsi->back;
2396	struct hlist_node *node2;
2397	int err = -EINVAL;
2398
2399	parent = NULL;
2400	rule = NULL;
2401
2402	hlist_for_each_entry_safe(rule, node2,
2403				  &pf->fdir_filter_list, fdir_node) {
2404		/* hash found, or no matching entry */
2405		if (rule->fd_id >= sw_idx)
2406			break;
2407		parent = rule;
2408	}
2409
2410	/* if there is an old rule occupying our place remove it */
2411	if (rule && (rule->fd_id == sw_idx)) {
2412		if (input && !i40e_match_fdir_input_set(rule, input))
2413			err = i40e_add_del_fdir(vsi, rule, false);
2414		else if (!input)
2415			err = i40e_add_del_fdir(vsi, rule, false);
2416		hlist_del(&rule->fdir_node);
2417		kfree(rule);
2418		pf->fdir_pf_active_filters--;
2419	}
2420
2421	/* If no input this was a delete, err should be 0 if a rule was
2422	 * successfully found and removed from the list else -EINVAL
2423	 */
2424	if (!input)
2425		return err;
2426
2427	/* initialize node and set software index */
2428	INIT_HLIST_NODE(&input->fdir_node);
2429
2430	/* add filter to the list */
2431	if (parent)
2432		hlist_add_behind(&input->fdir_node, &parent->fdir_node);
2433	else
2434		hlist_add_head(&input->fdir_node,
2435			       &pf->fdir_filter_list);
2436
2437	/* update counts */
2438	pf->fdir_pf_active_filters++;
2439
2440	return 0;
2441}
2442
2443/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2444 * i40e_del_fdir_entry - Deletes a Flow Director filter entry
2445 * @vsi: Pointer to the targeted VSI
2446 * @cmd: The command to get or set Rx flow classification rules
2447 *
2448 * The function removes a Flow Director filter entry from the
2449 * hlist of the corresponding PF
2450 *
2451 * Returns 0 on success
2452 */
2453static int i40e_del_fdir_entry(struct i40e_vsi *vsi,
2454			       struct ethtool_rxnfc *cmd)
2455{
2456	struct ethtool_rx_flow_spec *fsp =
2457		(struct ethtool_rx_flow_spec *)&cmd->fs;
2458	struct i40e_pf *pf = vsi->back;
2459	int ret = 0;
2460
2461	if (test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state) ||
2462	    test_bit(__I40E_RESET_INTR_RECEIVED, &pf->state))
2463		return -EBUSY;
2464
2465	if (test_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state))
2466		return -EBUSY;
2467
2468	ret = i40e_update_ethtool_fdir_entry(vsi, NULL, fsp->location, cmd);
2469
 
 
2470	i40e_fdir_check_and_reenable(pf);
2471	return ret;
2472}
2473
2474/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2475 * i40e_add_fdir_ethtool - Add/Remove Flow Director filters
2476 * @vsi: pointer to the targeted VSI
2477 * @cmd: command to get or set RX flow classification rules
2478 *
2479 * Add Flow Director filters for a specific flow spec based on their
2480 * protocol.  Returns 0 if the filters were successfully added.
2481 **/
2482static int i40e_add_fdir_ethtool(struct i40e_vsi *vsi,
2483				 struct ethtool_rxnfc *cmd)
2484{
 
2485	struct ethtool_rx_flow_spec *fsp;
2486	struct i40e_fdir_filter *input;
 
2487	struct i40e_pf *pf;
2488	int ret = -EINVAL;
2489	u16 vf_id;
2490
2491	if (!vsi)
2492		return -EINVAL;
2493
2494	pf = vsi->back;
2495
2496	if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
2497		return -EOPNOTSUPP;
2498
2499	if (pf->auto_disable_flags & I40E_FLAG_FD_SB_ENABLED)
2500		return -ENOSPC;
2501
2502	if (test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state) ||
2503	    test_bit(__I40E_RESET_INTR_RECEIVED, &pf->state))
2504		return -EBUSY;
2505
2506	if (test_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state))
2507		return -EBUSY;
2508
2509	fsp = (struct ethtool_rx_flow_spec *)&cmd->fs;
2510
 
 
 
 
 
 
 
 
 
 
 
 
2511	if (fsp->location >= (pf->hw.func_caps.fd_filters_best_effort +
2512			      pf->hw.func_caps.fd_filters_guaranteed)) {
2513		return -EINVAL;
2514	}
2515
2516	if ((fsp->ring_cookie != RX_CLS_FLOW_DISC) &&
2517	    (fsp->ring_cookie >= vsi->num_queue_pairs))
2518		return -EINVAL;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2519
2520	input = kzalloc(sizeof(*input), GFP_KERNEL);
2521
2522	if (!input)
2523		return -ENOMEM;
2524
2525	input->fd_id = fsp->location;
2526
2527	if (fsp->ring_cookie == RX_CLS_FLOW_DISC)
2528		input->dest_ctl = I40E_FILTER_PROGRAM_DESC_DEST_DROP_PACKET;
2529	else
2530		input->dest_ctl =
2531			     I40E_FILTER_PROGRAM_DESC_DEST_DIRECT_PACKET_QINDEX;
2532
2533	input->q_index = fsp->ring_cookie;
2534	input->flex_off = 0;
2535	input->pctype = 0;
2536	input->dest_vsi = vsi->id;
2537	input->fd_status = I40E_FILTER_PROGRAM_DESC_FD_STATUS_FD_ID;
2538	input->cnt_index  = I40E_FD_SB_STAT_IDX(pf->hw.pf_id);
2539	input->flow_type = fsp->flow_type;
 
 
2540	input->ip4_proto = fsp->h_u.usr_ip4_spec.proto;
2541
2542	/* Reverse the src and dest notion, since the HW expects them to be from
2543	 * Tx perspective where as the input from user is from Rx filter view.
2544	 */
2545	input->dst_port = fsp->h_u.tcp_ip4_spec.psrc;
2546	input->src_port = fsp->h_u.tcp_ip4_spec.pdst;
2547	input->dst_ip[0] = fsp->h_u.tcp_ip4_spec.ip4src;
2548	input->src_ip[0] = fsp->h_u.tcp_ip4_spec.ip4dst;
2549
2550	if (ntohl(fsp->m_ext.data[1])) {
2551		if (ntohl(fsp->h_ext.data[1]) >= pf->num_alloc_vfs) {
2552			netif_info(pf, drv, vsi->netdev, "Invalid VF id\n");
2553			goto free_input;
2554		}
2555		vf_id = ntohl(fsp->h_ext.data[1]);
2556		/* Find vsi id from vf id and override dest vsi */
2557		input->dest_vsi = pf->vf[vf_id].lan_vsi_id;
2558		if (input->q_index >= pf->vf[vf_id].num_queue_pairs) {
2559			netif_info(pf, drv, vsi->netdev, "Invalid queue id\n");
2560			goto free_input;
2561		}
2562	}
2563
 
 
 
 
 
 
 
 
 
 
2564	ret = i40e_add_del_fdir(vsi, input, true);
2565free_input:
2566	if (ret)
2567		kfree(input);
2568	else
2569		i40e_update_ethtool_fdir_entry(vsi, input, fsp->location, NULL);
2570
 
 
 
 
 
2571	return ret;
2572}
2573
2574/**
2575 * i40e_set_rxnfc - command to set RX flow classification rules
2576 * @netdev: network interface device structure
2577 * @cmd: ethtool rxnfc command
2578 *
2579 * Returns Success if the command is supported.
2580 **/
2581static int i40e_set_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd)
2582{
2583	struct i40e_netdev_priv *np = netdev_priv(netdev);
2584	struct i40e_vsi *vsi = np->vsi;
2585	struct i40e_pf *pf = vsi->back;
2586	int ret = -EOPNOTSUPP;
2587
2588	switch (cmd->cmd) {
2589	case ETHTOOL_SRXFH:
2590		ret = i40e_set_rss_hash_opt(pf, cmd);
2591		break;
2592	case ETHTOOL_SRXCLSRLINS:
2593		ret = i40e_add_fdir_ethtool(vsi, cmd);
2594		break;
2595	case ETHTOOL_SRXCLSRLDEL:
2596		ret = i40e_del_fdir_entry(vsi, cmd);
2597		break;
2598	default:
2599		break;
2600	}
2601
2602	return ret;
2603}
2604
2605/**
2606 * i40e_max_channels - get Max number of combined channels supported
2607 * @vsi: vsi pointer
2608 **/
2609static unsigned int i40e_max_channels(struct i40e_vsi *vsi)
2610{
2611	/* TODO: This code assumes DCB and FD is disabled for now. */
2612	return vsi->alloc_queue_pairs;
2613}
2614
2615/**
2616 * i40e_get_channels - Get the current channels enabled and max supported etc.
2617 * @netdev: network interface device structure
2618 * @ch: ethtool channels structure
2619 *
2620 * We don't support separate tx and rx queues as channels. The other count
2621 * represents how many queues are being used for control. max_combined counts
2622 * how many queue pairs we can support. They may not be mapped 1 to 1 with
2623 * q_vectors since we support a lot more queue pairs than q_vectors.
2624 **/
2625static void i40e_get_channels(struct net_device *dev,
2626			       struct ethtool_channels *ch)
2627{
2628	struct i40e_netdev_priv *np = netdev_priv(dev);
2629	struct i40e_vsi *vsi = np->vsi;
2630	struct i40e_pf *pf = vsi->back;
2631
2632	/* report maximum channels */
2633	ch->max_combined = i40e_max_channels(vsi);
2634
2635	/* report info for other vector */
2636	ch->other_count = (pf->flags & I40E_FLAG_FD_SB_ENABLED) ? 1 : 0;
2637	ch->max_other = ch->other_count;
2638
2639	/* Note: This code assumes DCB is disabled for now. */
2640	ch->combined_count = vsi->num_queue_pairs;
2641}
2642
2643/**
2644 * i40e_set_channels - Set the new channels count.
2645 * @netdev: network interface device structure
2646 * @ch: ethtool channels structure
2647 *
2648 * The new channels count may not be the same as requested by the user
2649 * since it gets rounded down to a power of 2 value.
2650 **/
2651static int i40e_set_channels(struct net_device *dev,
2652			      struct ethtool_channels *ch)
2653{
 
2654	struct i40e_netdev_priv *np = netdev_priv(dev);
2655	unsigned int count = ch->combined_count;
2656	struct i40e_vsi *vsi = np->vsi;
2657	struct i40e_pf *pf = vsi->back;
 
 
2658	int new_count;
 
2659
2660	/* We do not support setting channels for any other VSI at present */
2661	if (vsi->type != I40E_VSI_MAIN)
2662		return -EINVAL;
2663
 
 
 
 
 
 
2664	/* verify they are not requesting separate vectors */
2665	if (!count || ch->rx_count || ch->tx_count)
2666		return -EINVAL;
2667
2668	/* verify other_count has not changed */
2669	if (ch->other_count != ((pf->flags & I40E_FLAG_FD_SB_ENABLED) ? 1 : 0))
2670		return -EINVAL;
2671
2672	/* verify the number of channels does not exceed hardware limits */
2673	if (count > i40e_max_channels(vsi))
2674		return -EINVAL;
2675
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2676	/* update feature limits from largest to smallest supported values */
2677	/* TODO: Flow director limit, DCB etc */
2678
2679	/* use rss_reconfig to rebuild with new queue count and update traffic
2680	 * class queue mapping
2681	 */
2682	new_count = i40e_reconfig_rss_queues(pf, count);
2683	if (new_count > 0)
2684		return 0;
2685	else
2686		return -EINVAL;
2687}
2688
2689/**
2690 * i40e_get_rxfh_key_size - get the RSS hash key size
2691 * @netdev: network interface device structure
2692 *
2693 * Returns the table size.
2694 **/
2695static u32 i40e_get_rxfh_key_size(struct net_device *netdev)
2696{
2697	return I40E_HKEY_ARRAY_SIZE;
2698}
2699
2700/**
2701 * i40e_get_rxfh_indir_size - get the rx flow hash indirection table size
2702 * @netdev: network interface device structure
2703 *
2704 * Returns the table size.
2705 **/
2706static u32 i40e_get_rxfh_indir_size(struct net_device *netdev)
2707{
2708	return I40E_HLUT_ARRAY_SIZE;
2709}
2710
 
 
 
 
 
 
 
 
 
 
2711static int i40e_get_rxfh(struct net_device *netdev, u32 *indir, u8 *key,
2712			 u8 *hfunc)
2713{
2714	struct i40e_netdev_priv *np = netdev_priv(netdev);
2715	struct i40e_vsi *vsi = np->vsi;
2716	u8 *lut, *seed = NULL;
2717	int ret;
2718	u16 i;
2719
2720	if (hfunc)
2721		*hfunc = ETH_RSS_HASH_TOP;
2722
2723	if (!indir)
2724		return 0;
2725
2726	seed = key;
2727	lut = kzalloc(I40E_HLUT_ARRAY_SIZE, GFP_KERNEL);
2728	if (!lut)
2729		return -ENOMEM;
2730	ret = i40e_get_rss(vsi, seed, lut, I40E_HLUT_ARRAY_SIZE);
2731	if (ret)
2732		goto out;
2733	for (i = 0; i < I40E_HLUT_ARRAY_SIZE; i++)
2734		indir[i] = (u32)(lut[i]);
2735
2736out:
2737	kfree(lut);
2738
2739	return ret;
2740}
2741
2742/**
2743 * i40e_set_rxfh - set the rx flow hash indirection table
2744 * @netdev: network interface device structure
2745 * @indir: indirection table
2746 * @key: hash key
 
2747 *
2748 * Returns -EINVAL if the table specifies an invalid queue id, otherwise
2749 * returns 0 after programming the table.
2750 **/
2751static int i40e_set_rxfh(struct net_device *netdev, const u32 *indir,
2752			 const u8 *key, const u8 hfunc)
2753{
2754	struct i40e_netdev_priv *np = netdev_priv(netdev);
2755	struct i40e_vsi *vsi = np->vsi;
 
2756	u8 *seed = NULL;
2757	u16 i;
2758
2759	if (hfunc != ETH_RSS_HASH_NO_CHANGE && hfunc != ETH_RSS_HASH_TOP)
2760		return -EOPNOTSUPP;
2761
2762	if (!indir)
2763		return 0;
2764
2765	if (key) {
2766		if (!vsi->rss_hkey_user) {
2767			vsi->rss_hkey_user = kzalloc(I40E_HKEY_ARRAY_SIZE,
2768						     GFP_KERNEL);
2769			if (!vsi->rss_hkey_user)
2770				return -ENOMEM;
2771		}
2772		memcpy(vsi->rss_hkey_user, key, I40E_HKEY_ARRAY_SIZE);
2773		seed = vsi->rss_hkey_user;
2774	}
2775	if (!vsi->rss_lut_user) {
2776		vsi->rss_lut_user = kzalloc(I40E_HLUT_ARRAY_SIZE, GFP_KERNEL);
2777		if (!vsi->rss_lut_user)
2778			return -ENOMEM;
2779	}
2780
2781	/* Each 32 bits pointed by 'indir' is stored with a lut entry */
2782	for (i = 0; i < I40E_HLUT_ARRAY_SIZE; i++)
2783		vsi->rss_lut_user[i] = (u8)(indir[i]);
 
 
 
 
2784
2785	return i40e_config_rss(vsi, seed, vsi->rss_lut_user,
2786			       I40E_HLUT_ARRAY_SIZE);
2787}
2788
2789/**
2790 * i40e_get_priv_flags - report device private flags
2791 * @dev: network interface device structure
2792 *
2793 * The get string set count and the string set should be matched for each
2794 * flag returned.  Add new strings for each flag to the i40e_priv_flags_strings
2795 * array.
2796 *
2797 * Returns a u32 bitmap of flags.
2798 **/
2799static u32 i40e_get_priv_flags(struct net_device *dev)
2800{
2801	struct i40e_netdev_priv *np = netdev_priv(dev);
2802	struct i40e_vsi *vsi = np->vsi;
2803	struct i40e_pf *pf = vsi->back;
2804	u32 ret_flags = 0;
2805
2806	ret_flags |= pf->hw.func_caps.npar_enable ?
2807		I40E_PRIV_FLAGS_NPAR_FLAG : 0;
2808	ret_flags |= pf->flags & I40E_FLAG_LINK_POLLING_ENABLED ?
2809		I40E_PRIV_FLAGS_LINKPOLL_FLAG : 0;
2810	ret_flags |= pf->flags & I40E_FLAG_FD_ATR_ENABLED ?
2811		I40E_PRIV_FLAGS_FD_ATR : 0;
2812	ret_flags |= pf->flags & I40E_FLAG_VEB_STATS_ENABLED ?
2813		I40E_PRIV_FLAGS_VEB_STATS : 0;
2814	ret_flags |= pf->flags & I40E_FLAG_RX_PS_ENABLED ?
2815		I40E_PRIV_FLAGS_PS : 0;
2816	ret_flags |= pf->auto_disable_flags & I40E_FLAG_HW_ATR_EVICT_CAPABLE ?
2817		0 : I40E_PRIV_FLAGS_HW_ATR_EVICT;
 
 
 
 
 
 
 
 
2818
2819	return ret_flags;
2820}
2821
2822/**
2823 * i40e_set_priv_flags - set private flags
2824 * @dev: network interface device structure
2825 * @flags: bit flags to be set
2826 **/
2827static int i40e_set_priv_flags(struct net_device *dev, u32 flags)
2828{
2829	struct i40e_netdev_priv *np = netdev_priv(dev);
 
 
2830	struct i40e_vsi *vsi = np->vsi;
2831	struct i40e_pf *pf = vsi->back;
2832	bool reset_required = false;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2833
2834	/* NOTE: MFP is not settable */
 
 
 
2835
2836	/* allow the user to control the method of receive
2837	 * buffer DMA, whether the packet is split at header
2838	 * boundaries into two separate buffers.  In some cases
2839	 * one routine or the other will perform better.
2840	 */
2841	if ((flags & I40E_PRIV_FLAGS_PS) &&
2842	    !(pf->flags & I40E_FLAG_RX_PS_ENABLED)) {
2843		pf->flags |= I40E_FLAG_RX_PS_ENABLED;
2844		pf->flags &= ~I40E_FLAG_RX_1BUF_ENABLED;
2845		reset_required = true;
2846	} else if (!(flags & I40E_PRIV_FLAGS_PS) &&
2847		   (pf->flags & I40E_FLAG_RX_PS_ENABLED)) {
2848		pf->flags &= ~I40E_FLAG_RX_PS_ENABLED;
2849		pf->flags |= I40E_FLAG_RX_1BUF_ENABLED;
2850		reset_required = true;
2851	}
2852
2853	if (flags & I40E_PRIV_FLAGS_LINKPOLL_FLAG)
2854		pf->flags |= I40E_FLAG_LINK_POLLING_ENABLED;
2855	else
2856		pf->flags &= ~I40E_FLAG_LINK_POLLING_ENABLED;
2857
2858	/* allow the user to control the state of the Flow
2859	 * Director ATR (Application Targeted Routing) feature
2860	 * of the driver
2861	 */
2862	if (flags & I40E_PRIV_FLAGS_FD_ATR) {
2863		pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
2864	} else {
2865		pf->flags &= ~I40E_FLAG_FD_ATR_ENABLED;
2866		pf->auto_disable_flags |= I40E_FLAG_FD_ATR_ENABLED;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2867	}
2868
2869	if ((flags & I40E_PRIV_FLAGS_VEB_STATS) &&
2870	    !(pf->flags & I40E_FLAG_VEB_STATS_ENABLED)) {
2871		pf->flags |= I40E_FLAG_VEB_STATS_ENABLED;
2872		reset_required = true;
2873	} else if (!(flags & I40E_PRIV_FLAGS_VEB_STATS) &&
2874		   (pf->flags & I40E_FLAG_VEB_STATS_ENABLED)) {
2875		pf->flags &= ~I40E_FLAG_VEB_STATS_ENABLED;
2876		reset_required = true;
2877	}
2878
2879	if ((flags & I40E_PRIV_FLAGS_HW_ATR_EVICT) &&
2880	    (pf->flags & I40E_FLAG_HW_ATR_EVICT_CAPABLE))
2881		pf->auto_disable_flags &= ~I40E_FLAG_HW_ATR_EVICT_CAPABLE;
2882	else
2883		pf->auto_disable_flags |= I40E_FLAG_HW_ATR_EVICT_CAPABLE;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2884
2885	/* if needed, issue reset to cause things to take effect */
2886	if (reset_required)
2887		i40e_do_reset(pf, BIT(__I40E_PF_RESET_REQUESTED));
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2888
 
 
 
 
 
 
 
2889	return 0;
2890}
2891
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2892static const struct ethtool_ops i40e_ethtool_ops = {
2893	.get_settings		= i40e_get_settings,
2894	.set_settings		= i40e_set_settings,
2895	.get_drvinfo		= i40e_get_drvinfo,
2896	.get_regs_len		= i40e_get_regs_len,
2897	.get_regs		= i40e_get_regs,
2898	.nway_reset		= i40e_nway_reset,
2899	.get_link		= ethtool_op_get_link,
2900	.get_wol		= i40e_get_wol,
2901	.set_wol		= i40e_set_wol,
2902	.set_eeprom		= i40e_set_eeprom,
2903	.get_eeprom_len		= i40e_get_eeprom_len,
2904	.get_eeprom		= i40e_get_eeprom,
2905	.get_ringparam		= i40e_get_ringparam,
2906	.set_ringparam		= i40e_set_ringparam,
2907	.get_pauseparam		= i40e_get_pauseparam,
2908	.set_pauseparam		= i40e_set_pauseparam,
2909	.get_msglevel		= i40e_get_msglevel,
2910	.set_msglevel		= i40e_set_msglevel,
2911	.get_rxnfc		= i40e_get_rxnfc,
2912	.set_rxnfc		= i40e_set_rxnfc,
2913	.self_test		= i40e_diag_test,
2914	.get_strings		= i40e_get_strings,
 
 
2915	.set_phys_id		= i40e_set_phys_id,
2916	.get_sset_count		= i40e_get_sset_count,
2917	.get_ethtool_stats	= i40e_get_ethtool_stats,
2918	.get_coalesce		= i40e_get_coalesce,
2919	.set_coalesce		= i40e_set_coalesce,
2920	.get_rxfh_key_size	= i40e_get_rxfh_key_size,
2921	.get_rxfh_indir_size	= i40e_get_rxfh_indir_size,
2922	.get_rxfh		= i40e_get_rxfh,
2923	.set_rxfh		= i40e_set_rxfh,
2924	.get_channels		= i40e_get_channels,
2925	.set_channels		= i40e_set_channels,
 
 
2926	.get_ts_info		= i40e_get_ts_info,
2927	.get_priv_flags		= i40e_get_priv_flags,
2928	.set_priv_flags		= i40e_set_priv_flags,
2929	.get_per_queue_coalesce	= i40e_get_per_queue_coalesce,
2930	.set_per_queue_coalesce	= i40e_set_per_queue_coalesce,
 
 
 
 
 
2931};
2932
2933void i40e_set_ethtool_ops(struct net_device *netdev)
2934{
2935	netdev->ethtool_ops = &i40e_ethtool_ops;
 
 
 
 
 
 
2936}