Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
4 *
5 * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6 */
7
8/dts-v1/;
9#include "at91sam9260.dtsi"
10
11/ {
12 model = "Somfy Animeo IP";
13 compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9";
14
15 aliases {
16 serial0 = &usart1;
17 serial1 = &usart2;
18 serial2 = &usart0;
19 serial3 = &dbgu;
20 serial4 = &usart3;
21 serial5 = &uart0;
22 serial6 = &uart1;
23 };
24
25 chosen {
26 stdout-path = &usart2;
27 };
28
29 memory {
30 reg = <0x20000000 0x4000000>;
31 };
32
33 clocks {
34 slow_xtal {
35 clock-frequency = <32768>;
36 };
37
38 main_xtal {
39 clock-frequency = <18432000>;
40 };
41 };
42
43 ahb {
44 apb {
45 tcb0: timer@fffa0000 {
46 timer@0 {
47 compatible = "atmel,tcb-timer";
48 reg = <0>, <1>;
49 };
50
51 timer@2 {
52 compatible = "atmel,tcb-timer";
53 reg = <2>;
54 };
55 };
56
57 usart0: serial@fffb0000 {
58 pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
59 linux,rs485-enabled-at-boot-time;
60 status = "okay";
61 };
62
63 usart1: serial@fffb4000 {
64 pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>;
65 linux,rs485-enabled-at-boot-time;
66 status = "okay";
67 };
68
69 usart2: serial@fffb8000 {
70 pinctrl-0 = <&pinctrl_usart2>;
71 status = "okay";
72 };
73
74 macb0: ethernet@fffc4000 {
75 pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>;
76 phy-mode = "mii";
77 status = "okay";
78 };
79
80 mmc0: mmc@fffa8000 {
81 pinctrl-0 = <&pinctrl_mmc0_clk
82 &pinctrl_mmc0_slot1_cmd_dat0
83 &pinctrl_mmc0_slot1_dat1_3>;
84 status = "okay";
85
86 slot@1 {
87 reg = <1>;
88 bus-width = <4>;
89 };
90 };
91
92 watchdog@fffffd40 {
93 status = "okay";
94 };
95 };
96
97 ebi: ebi@10000000 {
98 status = "okay";
99
100 nand_controller: nand-controller {
101 status = "okay";
102 pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
103 pinctrl-names = "default";
104
105 nand@3 {
106 reg = <0x3 0x0 0x800000>;
107 rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
108 cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
109 nand-bus-width = <8>;
110 nand-ecc-mode = "soft";
111 nand-on-flash-bbt;
112 label = "atmel_nand";
113
114 partitions {
115 compatible = "fixed-partitions";
116 #address-cells = <1>;
117 #size-cells = <1>;
118
119 barebox@0 {
120 label = "barebox";
121 reg = <0x0 0x58000>;
122 };
123
124 u_boot_env@58000 {
125 label = "u_boot_env";
126 reg = <0x58000 0x8000>;
127 };
128
129 ubi@60000 {
130 label = "ubi";
131 reg = <0x60000 0x1FA0000>;
132 };
133 };
134 };
135 };
136 };
137
138 usb0: ohci@500000 {
139 num-ports = <2>;
140 atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
141 status = "okay";
142 };
143 };
144
145 leds {
146 compatible = "gpio-leds";
147
148 power_green {
149 label = "power_green";
150 gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
151 linux,default-trigger = "heartbeat";
152 };
153
154 power_red {
155 label = "power_red";
156 gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
157 };
158
159 tx_green {
160 label = "tx_green";
161 gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
162 };
163
164 tx_red {
165 label = "tx_red";
166 gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
167 };
168 };
169
170 gpio_keys {
171 compatible = "gpio-keys";
172 #address-cells = <1>;
173 #size-cells = <0>;
174
175 keyswitch_in {
176 label = "keyswitch_in";
177 gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
178 linux,code = <28>;
179 wakeup-source;
180 };
181
182 error_in {
183 label = "error_in";
184 gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
185 linux,code = <29>;
186 wakeup-source;
187 };
188
189 btn {
190 label = "btn";
191 gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
192 linux,code = <31>;
193 wakeup-source;
194 };
195 };
196};
1/*
2 * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
3 *
4 * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5 *
6 * Licensed under GPLv2 only.
7 */
8
9/dts-v1/;
10#include "at91sam9260.dtsi"
11
12/ {
13 model = "Somfy Animeo IP";
14 compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9";
15
16 aliases {
17 serial0 = &usart1;
18 serial1 = &usart2;
19 serial2 = &usart0;
20 serial3 = &dbgu;
21 serial4 = &usart3;
22 serial5 = &uart0;
23 serial6 = &uart1;
24 };
25
26 chosen {
27 linux,stdout-path = &usart2;
28 };
29
30 memory {
31 reg = <0x20000000 0x4000000>;
32 };
33
34 clocks {
35 #address-cells = <1>;
36 #size-cells = <1>;
37 ranges;
38
39 main_clock: clock@0 {
40 compatible = "atmel,osc", "fixed-clock";
41 clock-frequency = <18432000>;
42 };
43
44 slow_xtal {
45 clock-frequency = <32768>;
46 };
47
48 main_xtal {
49 clock-frequency = <18432000>;
50 };
51 };
52
53 ahb {
54 apb {
55 usart0: serial@fffb0000 {
56 pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
57 linux,rs485-enabled-at-boot-time;
58 status = "okay";
59 };
60
61 usart1: serial@fffb4000 {
62 pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>;
63 linux,rs485-enabled-at-boot-time;
64 status = "okay";
65 };
66
67 usart2: serial@fffb8000 {
68 pinctrl-0 = <&pinctrl_usart2>;
69 status = "okay";
70 };
71
72 macb0: ethernet@fffc4000 {
73 pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>;
74 phy-mode = "mii";
75 status = "okay";
76 };
77
78 mmc0: mmc@fffa8000 {
79 pinctrl-0 = <&pinctrl_mmc0_clk
80 &pinctrl_mmc0_slot1_cmd_dat0
81 &pinctrl_mmc0_slot1_dat1_3>;
82 status = "okay";
83
84 slot@1 {
85 reg = <1>;
86 bus-width = <4>;
87 };
88 };
89
90 watchdog@fffffd40 {
91 status = "okay";
92 };
93 };
94
95 nand0: nand@40000000 {
96 nand-bus-width = <8>;
97 nand-ecc-mode = "soft";
98 nand-on-flash-bbt;
99 status = "okay";
100
101 barebox@0 {
102 label = "barebox";
103 reg = <0x0 0x58000>;
104 };
105
106 u_boot_env@58000 {
107 label = "u_boot_env";
108 reg = <0x58000 0x8000>;
109 };
110
111 ubi@60000 {
112 label = "ubi";
113 reg = <0x60000 0x1FA0000>;
114 };
115 };
116
117 usb0: ohci@00500000 {
118 num-ports = <2>;
119 atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
120 status = "okay";
121 };
122 };
123
124 leds {
125 compatible = "gpio-leds";
126
127 power_green {
128 label = "power_green";
129 gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
130 linux,default-trigger = "heartbeat";
131 };
132
133 power_red {
134 label = "power_red";
135 gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
136 };
137
138 tx_green {
139 label = "tx_green";
140 gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
141 };
142
143 tx_red {
144 label = "tx_red";
145 gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
146 };
147 };
148
149 gpio_keys {
150 compatible = "gpio-keys";
151 #address-cells = <1>;
152 #size-cells = <0>;
153
154 keyswitch_in {
155 label = "keyswitch_in";
156 gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
157 linux,code = <28>;
158 wakeup-source;
159 };
160
161 error_in {
162 label = "error_in";
163 gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
164 linux,code = <29>;
165 wakeup-source;
166 };
167
168 btn {
169 label = "btn";
170 gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
171 linux,code = <31>;
172 wakeup-source;
173 };
174 };
175};