Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * (C) Copyright David Brownell 2000-2002
4 */
5
6#include <linux/kernel.h>
7#include <linux/module.h>
8#include <linux/pci.h>
9#include <linux/usb.h>
10#include <linux/usb/hcd.h>
11
12#include <asm/io.h>
13#include <asm/irq.h>
14
15#ifdef CONFIG_PPC_PMAC
16#include <asm/machdep.h>
17#include <asm/pmac_feature.h>
18#include <asm/prom.h>
19#endif
20
21#include "usb.h"
22
23
24/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
25
26/*
27 * Coordinate handoffs between EHCI and companion controllers
28 * during EHCI probing and system resume.
29 */
30
31static DECLARE_RWSEM(companions_rwsem);
32
33#define CL_UHCI PCI_CLASS_SERIAL_USB_UHCI
34#define CL_OHCI PCI_CLASS_SERIAL_USB_OHCI
35#define CL_EHCI PCI_CLASS_SERIAL_USB_EHCI
36
37static inline int is_ohci_or_uhci(struct pci_dev *pdev)
38{
39 return pdev->class == CL_OHCI || pdev->class == CL_UHCI;
40}
41
42typedef void (*companion_fn)(struct pci_dev *pdev, struct usb_hcd *hcd,
43 struct pci_dev *companion, struct usb_hcd *companion_hcd);
44
45/* Iterate over PCI devices in the same slot as pdev and call fn for each */
46static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd,
47 companion_fn fn)
48{
49 struct pci_dev *companion;
50 struct usb_hcd *companion_hcd;
51 unsigned int slot = PCI_SLOT(pdev->devfn);
52
53 /*
54 * Iterate through other PCI functions in the same slot.
55 * If the function's drvdata isn't set then it isn't bound to
56 * a USB host controller driver, so skip it.
57 */
58 companion = NULL;
59 for_each_pci_dev(companion) {
60 if (companion->bus != pdev->bus ||
61 PCI_SLOT(companion->devfn) != slot)
62 continue;
63
64 /*
65 * Companion device should be either UHCI,OHCI or EHCI host
66 * controller, otherwise skip.
67 */
68 if (companion->class != CL_UHCI && companion->class != CL_OHCI &&
69 companion->class != CL_EHCI)
70 continue;
71
72 companion_hcd = pci_get_drvdata(companion);
73 if (!companion_hcd || !companion_hcd->self.root_hub)
74 continue;
75 fn(pdev, hcd, companion, companion_hcd);
76 }
77}
78
79/*
80 * We're about to add an EHCI controller, which will unceremoniously grab
81 * all the port connections away from its companions. To prevent annoying
82 * error messages, lock the companion's root hub and gracefully unconfigure
83 * it beforehand. Leave it locked until the EHCI controller is all set.
84 */
85static void ehci_pre_add(struct pci_dev *pdev, struct usb_hcd *hcd,
86 struct pci_dev *companion, struct usb_hcd *companion_hcd)
87{
88 struct usb_device *udev;
89
90 if (is_ohci_or_uhci(companion)) {
91 udev = companion_hcd->self.root_hub;
92 usb_lock_device(udev);
93 usb_set_configuration(udev, 0);
94 }
95}
96
97/*
98 * Adding the EHCI controller has either succeeded or failed. Set the
99 * companion pointer accordingly, and in either case, reconfigure and
100 * unlock the root hub.
101 */
102static void ehci_post_add(struct pci_dev *pdev, struct usb_hcd *hcd,
103 struct pci_dev *companion, struct usb_hcd *companion_hcd)
104{
105 struct usb_device *udev;
106
107 if (is_ohci_or_uhci(companion)) {
108 if (dev_get_drvdata(&pdev->dev)) { /* Succeeded */
109 dev_dbg(&pdev->dev, "HS companion for %s\n",
110 dev_name(&companion->dev));
111 companion_hcd->self.hs_companion = &hcd->self;
112 }
113 udev = companion_hcd->self.root_hub;
114 usb_set_configuration(udev, 1);
115 usb_unlock_device(udev);
116 }
117}
118
119/*
120 * We just added a non-EHCI controller. Find the EHCI controller to
121 * which it is a companion, and store a pointer to the bus structure.
122 */
123static void non_ehci_add(struct pci_dev *pdev, struct usb_hcd *hcd,
124 struct pci_dev *companion, struct usb_hcd *companion_hcd)
125{
126 if (is_ohci_or_uhci(pdev) && companion->class == CL_EHCI) {
127 dev_dbg(&pdev->dev, "FS/LS companion for %s\n",
128 dev_name(&companion->dev));
129 hcd->self.hs_companion = &companion_hcd->self;
130 }
131}
132
133/* We are removing an EHCI controller. Clear the companions' pointers. */
134static void ehci_remove(struct pci_dev *pdev, struct usb_hcd *hcd,
135 struct pci_dev *companion, struct usb_hcd *companion_hcd)
136{
137 if (is_ohci_or_uhci(companion))
138 companion_hcd->self.hs_companion = NULL;
139}
140
141#ifdef CONFIG_PM
142
143/* An EHCI controller must wait for its companions before resuming. */
144static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd,
145 struct pci_dev *companion, struct usb_hcd *companion_hcd)
146{
147 if (is_ohci_or_uhci(companion))
148 device_pm_wait_for_dev(&pdev->dev, &companion->dev);
149}
150
151#endif /* CONFIG_PM */
152
153/*-------------------------------------------------------------------------*/
154
155/* configure so an HC device and id are always provided */
156/* always called with process context; sleeping is OK */
157
158/**
159 * usb_hcd_pci_probe - initialize PCI-based HCDs
160 * @dev: USB Host Controller being probed
161 * @id: pci hotplug id connecting controller to HCD framework
162 * Context: !in_interrupt()
163 *
164 * Allocates basic PCI resources for this USB host controller, and
165 * then invokes the start() method for the HCD associated with it
166 * through the hotplug entry's driver_data.
167 *
168 * Store this function in the HCD's struct pci_driver as probe().
169 *
170 * Return: 0 if successful.
171 */
172int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
173{
174 struct hc_driver *driver;
175 struct usb_hcd *hcd;
176 int retval;
177 int hcd_irq = 0;
178
179 if (usb_disabled())
180 return -ENODEV;
181
182 if (!id)
183 return -EINVAL;
184 driver = (struct hc_driver *)id->driver_data;
185 if (!driver)
186 return -EINVAL;
187
188 if (pci_enable_device(dev) < 0)
189 return -ENODEV;
190
191 /*
192 * The xHCI driver has its own irq management
193 * make sure irq setup is not touched for xhci in generic hcd code
194 */
195 if ((driver->flags & HCD_MASK) < HCD_USB3) {
196 if (!dev->irq) {
197 dev_err(&dev->dev,
198 "Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
199 pci_name(dev));
200 retval = -ENODEV;
201 goto disable_pci;
202 }
203 hcd_irq = dev->irq;
204 }
205
206 hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
207 if (!hcd) {
208 retval = -ENOMEM;
209 goto disable_pci;
210 }
211
212 hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
213 driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
214
215 if (driver->flags & HCD_MEMORY) {
216 /* EHCI, OHCI */
217 hcd->rsrc_start = pci_resource_start(dev, 0);
218 hcd->rsrc_len = pci_resource_len(dev, 0);
219 if (!devm_request_mem_region(&dev->dev, hcd->rsrc_start,
220 hcd->rsrc_len, driver->description)) {
221 dev_dbg(&dev->dev, "controller already in use\n");
222 retval = -EBUSY;
223 goto put_hcd;
224 }
225 hcd->regs = devm_ioremap_nocache(&dev->dev, hcd->rsrc_start,
226 hcd->rsrc_len);
227 if (hcd->regs == NULL) {
228 dev_dbg(&dev->dev, "error mapping memory\n");
229 retval = -EFAULT;
230 goto put_hcd;
231 }
232
233 } else {
234 /* UHCI */
235 int region;
236
237 for (region = 0; region < PCI_ROM_RESOURCE; region++) {
238 if (!(pci_resource_flags(dev, region) &
239 IORESOURCE_IO))
240 continue;
241
242 hcd->rsrc_start = pci_resource_start(dev, region);
243 hcd->rsrc_len = pci_resource_len(dev, region);
244 if (devm_request_region(&dev->dev, hcd->rsrc_start,
245 hcd->rsrc_len, driver->description))
246 break;
247 }
248 if (region == PCI_ROM_RESOURCE) {
249 dev_dbg(&dev->dev, "no i/o regions available\n");
250 retval = -EBUSY;
251 goto put_hcd;
252 }
253 }
254
255 pci_set_master(dev);
256
257 /* Note: dev_set_drvdata must be called while holding the rwsem */
258 if (dev->class == CL_EHCI) {
259 down_write(&companions_rwsem);
260 dev_set_drvdata(&dev->dev, hcd);
261 for_each_companion(dev, hcd, ehci_pre_add);
262 retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
263 if (retval != 0)
264 dev_set_drvdata(&dev->dev, NULL);
265 for_each_companion(dev, hcd, ehci_post_add);
266 up_write(&companions_rwsem);
267 } else {
268 down_read(&companions_rwsem);
269 dev_set_drvdata(&dev->dev, hcd);
270 retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
271 if (retval != 0)
272 dev_set_drvdata(&dev->dev, NULL);
273 else
274 for_each_companion(dev, hcd, non_ehci_add);
275 up_read(&companions_rwsem);
276 }
277
278 if (retval != 0)
279 goto put_hcd;
280 device_wakeup_enable(hcd->self.controller);
281
282 if (pci_dev_run_wake(dev))
283 pm_runtime_put_noidle(&dev->dev);
284 return retval;
285
286put_hcd:
287 usb_put_hcd(hcd);
288disable_pci:
289 pci_disable_device(dev);
290 dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval);
291 return retval;
292}
293EXPORT_SYMBOL_GPL(usb_hcd_pci_probe);
294
295
296/* may be called without controller electrically present */
297/* may be called with controller, bus, and devices active */
298
299/**
300 * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs
301 * @dev: USB Host Controller being removed
302 * Context: !in_interrupt()
303 *
304 * Reverses the effect of usb_hcd_pci_probe(), first invoking
305 * the HCD's stop() method. It is always called from a thread
306 * context, normally "rmmod", "apmd", or something similar.
307 *
308 * Store this function in the HCD's struct pci_driver as remove().
309 */
310void usb_hcd_pci_remove(struct pci_dev *dev)
311{
312 struct usb_hcd *hcd;
313
314 hcd = pci_get_drvdata(dev);
315 if (!hcd)
316 return;
317
318 if (pci_dev_run_wake(dev))
319 pm_runtime_get_noresume(&dev->dev);
320
321 /* Fake an interrupt request in order to give the driver a chance
322 * to test whether the controller hardware has been removed (e.g.,
323 * cardbus physical eject).
324 */
325 local_irq_disable();
326 usb_hcd_irq(0, hcd);
327 local_irq_enable();
328
329 /* Note: dev_set_drvdata must be called while holding the rwsem */
330 if (dev->class == CL_EHCI) {
331 down_write(&companions_rwsem);
332 for_each_companion(dev, hcd, ehci_remove);
333 usb_remove_hcd(hcd);
334 dev_set_drvdata(&dev->dev, NULL);
335 up_write(&companions_rwsem);
336 } else {
337 /* Not EHCI; just clear the companion pointer */
338 down_read(&companions_rwsem);
339 hcd->self.hs_companion = NULL;
340 usb_remove_hcd(hcd);
341 dev_set_drvdata(&dev->dev, NULL);
342 up_read(&companions_rwsem);
343 }
344 usb_put_hcd(hcd);
345 pci_disable_device(dev);
346}
347EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
348
349/**
350 * usb_hcd_pci_shutdown - shutdown host controller
351 * @dev: USB Host Controller being shutdown
352 */
353void usb_hcd_pci_shutdown(struct pci_dev *dev)
354{
355 struct usb_hcd *hcd;
356
357 hcd = pci_get_drvdata(dev);
358 if (!hcd)
359 return;
360
361 if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) &&
362 hcd->driver->shutdown) {
363 hcd->driver->shutdown(hcd);
364 if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
365 free_irq(hcd->irq, hcd);
366 pci_disable_device(dev);
367 }
368}
369EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
370
371#ifdef CONFIG_PM
372
373#ifdef CONFIG_PPC_PMAC
374static void powermac_set_asic(struct pci_dev *pci_dev, int enable)
375{
376 /* Enanble or disable ASIC clocks for USB */
377 if (machine_is(powermac)) {
378 struct device_node *of_node;
379
380 of_node = pci_device_to_OF_node(pci_dev);
381 if (of_node)
382 pmac_call_feature(PMAC_FTR_USB_ENABLE,
383 of_node, 0, enable);
384 }
385}
386
387#else
388
389static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable)
390{}
391
392#endif /* CONFIG_PPC_PMAC */
393
394static int check_root_hub_suspended(struct device *dev)
395{
396 struct usb_hcd *hcd = dev_get_drvdata(dev);
397
398 if (HCD_RH_RUNNING(hcd)) {
399 dev_warn(dev, "Root hub is not suspended\n");
400 return -EBUSY;
401 }
402 if (hcd->shared_hcd) {
403 hcd = hcd->shared_hcd;
404 if (HCD_RH_RUNNING(hcd)) {
405 dev_warn(dev, "Secondary root hub is not suspended\n");
406 return -EBUSY;
407 }
408 }
409 return 0;
410}
411
412static int suspend_common(struct device *dev, bool do_wakeup)
413{
414 struct pci_dev *pci_dev = to_pci_dev(dev);
415 struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
416 int retval;
417
418 /* Root hub suspend should have stopped all downstream traffic,
419 * and all bus master traffic. And done so for both the interface
420 * and the stub usb_device (which we check here). But maybe it
421 * didn't; writing sysfs power/state files ignores such rules...
422 */
423 retval = check_root_hub_suspended(dev);
424 if (retval)
425 return retval;
426
427 if (hcd->driver->pci_suspend && !HCD_DEAD(hcd)) {
428 /* Optimization: Don't suspend if a root-hub wakeup is
429 * pending and it would cause the HCD to wake up anyway.
430 */
431 if (do_wakeup && HCD_WAKEUP_PENDING(hcd))
432 return -EBUSY;
433 if (do_wakeup && hcd->shared_hcd &&
434 HCD_WAKEUP_PENDING(hcd->shared_hcd))
435 return -EBUSY;
436 retval = hcd->driver->pci_suspend(hcd, do_wakeup);
437 suspend_report_result(hcd->driver->pci_suspend, retval);
438
439 /* Check again in case wakeup raced with pci_suspend */
440 if ((retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) ||
441 (retval == 0 && do_wakeup && hcd->shared_hcd &&
442 HCD_WAKEUP_PENDING(hcd->shared_hcd))) {
443 if (hcd->driver->pci_resume)
444 hcd->driver->pci_resume(hcd, false);
445 retval = -EBUSY;
446 }
447 if (retval)
448 return retval;
449 }
450
451 /* If MSI-X is enabled, the driver will have synchronized all vectors
452 * in pci_suspend(). If MSI or legacy PCI is enabled, that will be
453 * synchronized here.
454 */
455 if (!hcd->msix_enabled)
456 synchronize_irq(pci_dev->irq);
457
458 /* Downstream ports from this root hub should already be quiesced, so
459 * there will be no DMA activity. Now we can shut down the upstream
460 * link (except maybe for PME# resume signaling). We'll enter a
461 * low power state during suspend_noirq, if the hardware allows.
462 */
463 pci_disable_device(pci_dev);
464 return retval;
465}
466
467static int resume_common(struct device *dev, int event)
468{
469 struct pci_dev *pci_dev = to_pci_dev(dev);
470 struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
471 int retval;
472
473 if (HCD_RH_RUNNING(hcd) ||
474 (hcd->shared_hcd &&
475 HCD_RH_RUNNING(hcd->shared_hcd))) {
476 dev_dbg(dev, "can't resume, not suspended!\n");
477 return 0;
478 }
479
480 retval = pci_enable_device(pci_dev);
481 if (retval < 0) {
482 dev_err(dev, "can't re-enable after resume, %d!\n", retval);
483 return retval;
484 }
485
486 pci_set_master(pci_dev);
487
488 if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) {
489
490 /*
491 * Only EHCI controllers have to wait for their companions.
492 * No locking is needed because PCI controller drivers do not
493 * get unbound during system resume.
494 */
495 if (pci_dev->class == CL_EHCI && event != PM_EVENT_AUTO_RESUME)
496 for_each_companion(pci_dev, hcd,
497 ehci_wait_for_companions);
498
499 retval = hcd->driver->pci_resume(hcd,
500 event == PM_EVENT_RESTORE);
501 if (retval) {
502 dev_err(dev, "PCI post-resume error %d!\n", retval);
503 usb_hc_died(hcd);
504 }
505 }
506 return retval;
507}
508
509#ifdef CONFIG_PM_SLEEP
510
511static int hcd_pci_suspend(struct device *dev)
512{
513 return suspend_common(dev, device_may_wakeup(dev));
514}
515
516static int hcd_pci_suspend_noirq(struct device *dev)
517{
518 struct pci_dev *pci_dev = to_pci_dev(dev);
519 struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
520 int retval;
521
522 retval = check_root_hub_suspended(dev);
523 if (retval)
524 return retval;
525
526 pci_save_state(pci_dev);
527
528 /* If the root hub is dead rather than suspended, disallow remote
529 * wakeup. usb_hc_died() should ensure that both hosts are marked as
530 * dying, so we only need to check the primary roothub.
531 */
532 if (HCD_DEAD(hcd))
533 device_set_wakeup_enable(dev, 0);
534 dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev));
535
536 /* Possibly enable remote wakeup,
537 * choose the appropriate low-power state, and go to that state.
538 */
539 retval = pci_prepare_to_sleep(pci_dev);
540 if (retval == -EIO) { /* Low-power not supported */
541 dev_dbg(dev, "--> PCI D0 legacy\n");
542 retval = 0;
543 } else if (retval == 0) {
544 dev_dbg(dev, "--> PCI %s\n",
545 pci_power_name(pci_dev->current_state));
546 } else {
547 suspend_report_result(pci_prepare_to_sleep, retval);
548 return retval;
549 }
550
551 powermac_set_asic(pci_dev, 0);
552 return retval;
553}
554
555static int hcd_pci_resume_noirq(struct device *dev)
556{
557 powermac_set_asic(to_pci_dev(dev), 1);
558 return 0;
559}
560
561static int hcd_pci_resume(struct device *dev)
562{
563 return resume_common(dev, PM_EVENT_RESUME);
564}
565
566static int hcd_pci_restore(struct device *dev)
567{
568 return resume_common(dev, PM_EVENT_RESTORE);
569}
570
571#else
572
573#define hcd_pci_suspend NULL
574#define hcd_pci_suspend_noirq NULL
575#define hcd_pci_resume_noirq NULL
576#define hcd_pci_resume NULL
577#define hcd_pci_restore NULL
578
579#endif /* CONFIG_PM_SLEEP */
580
581static int hcd_pci_runtime_suspend(struct device *dev)
582{
583 int retval;
584
585 retval = suspend_common(dev, true);
586 if (retval == 0)
587 powermac_set_asic(to_pci_dev(dev), 0);
588 dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval);
589 return retval;
590}
591
592static int hcd_pci_runtime_resume(struct device *dev)
593{
594 int retval;
595
596 powermac_set_asic(to_pci_dev(dev), 1);
597 retval = resume_common(dev, PM_EVENT_AUTO_RESUME);
598 dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval);
599 return retval;
600}
601
602const struct dev_pm_ops usb_hcd_pci_pm_ops = {
603 .suspend = hcd_pci_suspend,
604 .suspend_noirq = hcd_pci_suspend_noirq,
605 .resume_noirq = hcd_pci_resume_noirq,
606 .resume = hcd_pci_resume,
607 .freeze = check_root_hub_suspended,
608 .freeze_noirq = check_root_hub_suspended,
609 .thaw_noirq = NULL,
610 .thaw = NULL,
611 .poweroff = hcd_pci_suspend,
612 .poweroff_noirq = hcd_pci_suspend_noirq,
613 .restore_noirq = hcd_pci_resume_noirq,
614 .restore = hcd_pci_restore,
615 .runtime_suspend = hcd_pci_runtime_suspend,
616 .runtime_resume = hcd_pci_runtime_resume,
617};
618EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
619
620#endif /* CONFIG_PM */
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * (C) Copyright David Brownell 2000-2002
4 */
5
6#include <linux/kernel.h>
7#include <linux/module.h>
8#include <linux/pci.h>
9#include <linux/usb.h>
10#include <linux/usb/hcd.h>
11
12#include <asm/io.h>
13#include <asm/irq.h>
14
15#ifdef CONFIG_PPC_PMAC
16#include <asm/machdep.h>
17#include <asm/pmac_feature.h>
18#include <asm/prom.h>
19#endif
20
21#include "usb.h"
22
23
24/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
25
26/*
27 * Coordinate handoffs between EHCI and companion controllers
28 * during EHCI probing and system resume.
29 */
30
31static DECLARE_RWSEM(companions_rwsem);
32
33#define CL_UHCI PCI_CLASS_SERIAL_USB_UHCI
34#define CL_OHCI PCI_CLASS_SERIAL_USB_OHCI
35#define CL_EHCI PCI_CLASS_SERIAL_USB_EHCI
36
37static inline int is_ohci_or_uhci(struct pci_dev *pdev)
38{
39 return pdev->class == CL_OHCI || pdev->class == CL_UHCI;
40}
41
42typedef void (*companion_fn)(struct pci_dev *pdev, struct usb_hcd *hcd,
43 struct pci_dev *companion, struct usb_hcd *companion_hcd);
44
45/* Iterate over PCI devices in the same slot as pdev and call fn for each */
46static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd,
47 companion_fn fn)
48{
49 struct pci_dev *companion;
50 struct usb_hcd *companion_hcd;
51 unsigned int slot = PCI_SLOT(pdev->devfn);
52
53 /*
54 * Iterate through other PCI functions in the same slot.
55 * If the function's drvdata isn't set then it isn't bound to
56 * a USB host controller driver, so skip it.
57 */
58 companion = NULL;
59 for_each_pci_dev(companion) {
60 if (companion->bus != pdev->bus ||
61 PCI_SLOT(companion->devfn) != slot)
62 continue;
63
64 /*
65 * Companion device should be either UHCI,OHCI or EHCI host
66 * controller, otherwise skip.
67 */
68 if (companion->class != CL_UHCI && companion->class != CL_OHCI &&
69 companion->class != CL_EHCI)
70 continue;
71
72 companion_hcd = pci_get_drvdata(companion);
73 if (!companion_hcd || !companion_hcd->self.root_hub)
74 continue;
75 fn(pdev, hcd, companion, companion_hcd);
76 }
77}
78
79/*
80 * We're about to add an EHCI controller, which will unceremoniously grab
81 * all the port connections away from its companions. To prevent annoying
82 * error messages, lock the companion's root hub and gracefully unconfigure
83 * it beforehand. Leave it locked until the EHCI controller is all set.
84 */
85static void ehci_pre_add(struct pci_dev *pdev, struct usb_hcd *hcd,
86 struct pci_dev *companion, struct usb_hcd *companion_hcd)
87{
88 struct usb_device *udev;
89
90 if (is_ohci_or_uhci(companion)) {
91 udev = companion_hcd->self.root_hub;
92 usb_lock_device(udev);
93 usb_set_configuration(udev, 0);
94 }
95}
96
97/*
98 * Adding the EHCI controller has either succeeded or failed. Set the
99 * companion pointer accordingly, and in either case, reconfigure and
100 * unlock the root hub.
101 */
102static void ehci_post_add(struct pci_dev *pdev, struct usb_hcd *hcd,
103 struct pci_dev *companion, struct usb_hcd *companion_hcd)
104{
105 struct usb_device *udev;
106
107 if (is_ohci_or_uhci(companion)) {
108 if (dev_get_drvdata(&pdev->dev)) { /* Succeeded */
109 dev_dbg(&pdev->dev, "HS companion for %s\n",
110 dev_name(&companion->dev));
111 companion_hcd->self.hs_companion = &hcd->self;
112 }
113 udev = companion_hcd->self.root_hub;
114 usb_set_configuration(udev, 1);
115 usb_unlock_device(udev);
116 }
117}
118
119/*
120 * We just added a non-EHCI controller. Find the EHCI controller to
121 * which it is a companion, and store a pointer to the bus structure.
122 */
123static void non_ehci_add(struct pci_dev *pdev, struct usb_hcd *hcd,
124 struct pci_dev *companion, struct usb_hcd *companion_hcd)
125{
126 if (is_ohci_or_uhci(pdev) && companion->class == CL_EHCI) {
127 dev_dbg(&pdev->dev, "FS/LS companion for %s\n",
128 dev_name(&companion->dev));
129 hcd->self.hs_companion = &companion_hcd->self;
130 }
131}
132
133/* We are removing an EHCI controller. Clear the companions' pointers. */
134static void ehci_remove(struct pci_dev *pdev, struct usb_hcd *hcd,
135 struct pci_dev *companion, struct usb_hcd *companion_hcd)
136{
137 if (is_ohci_or_uhci(companion))
138 companion_hcd->self.hs_companion = NULL;
139}
140
141#ifdef CONFIG_PM
142
143/* An EHCI controller must wait for its companions before resuming. */
144static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd,
145 struct pci_dev *companion, struct usb_hcd *companion_hcd)
146{
147 if (is_ohci_or_uhci(companion))
148 device_pm_wait_for_dev(&pdev->dev, &companion->dev);
149}
150
151#endif /* CONFIG_PM */
152
153/*-------------------------------------------------------------------------*/
154
155/* configure so an HC device and id are always provided */
156/* always called with process context; sleeping is OK */
157
158/**
159 * usb_hcd_pci_probe - initialize PCI-based HCDs
160 * @dev: USB Host Controller being probed
161 * @id: pci hotplug id connecting controller to HCD framework
162 * Context: !in_interrupt()
163 *
164 * Allocates basic PCI resources for this USB host controller, and
165 * then invokes the start() method for the HCD associated with it
166 * through the hotplug entry's driver_data.
167 *
168 * Store this function in the HCD's struct pci_driver as probe().
169 *
170 * Return: 0 if successful.
171 */
172int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
173{
174 struct hc_driver *driver;
175 struct usb_hcd *hcd;
176 int retval;
177 int hcd_irq = 0;
178
179 if (usb_disabled())
180 return -ENODEV;
181
182 if (!id)
183 return -EINVAL;
184 driver = (struct hc_driver *)id->driver_data;
185 if (!driver)
186 return -EINVAL;
187
188 if (pci_enable_device(dev) < 0)
189 return -ENODEV;
190
191 /*
192 * The xHCI driver has its own irq management
193 * make sure irq setup is not touched for xhci in generic hcd code
194 */
195 if ((driver->flags & HCD_MASK) < HCD_USB3) {
196 if (!dev->irq) {
197 dev_err(&dev->dev,
198 "Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
199 pci_name(dev));
200 retval = -ENODEV;
201 goto disable_pci;
202 }
203 hcd_irq = dev->irq;
204 }
205
206 hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
207 if (!hcd) {
208 retval = -ENOMEM;
209 goto disable_pci;
210 }
211
212 hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
213 driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
214
215 if (driver->flags & HCD_MEMORY) {
216 /* EHCI, OHCI */
217 hcd->rsrc_start = pci_resource_start(dev, 0);
218 hcd->rsrc_len = pci_resource_len(dev, 0);
219 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
220 driver->description)) {
221 dev_dbg(&dev->dev, "controller already in use\n");
222 retval = -EBUSY;
223 goto put_hcd;
224 }
225 hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
226 if (hcd->regs == NULL) {
227 dev_dbg(&dev->dev, "error mapping memory\n");
228 retval = -EFAULT;
229 goto release_mem_region;
230 }
231
232 } else {
233 /* UHCI */
234 int region;
235
236 for (region = 0; region < PCI_ROM_RESOURCE; region++) {
237 if (!(pci_resource_flags(dev, region) &
238 IORESOURCE_IO))
239 continue;
240
241 hcd->rsrc_start = pci_resource_start(dev, region);
242 hcd->rsrc_len = pci_resource_len(dev, region);
243 if (request_region(hcd->rsrc_start, hcd->rsrc_len,
244 driver->description))
245 break;
246 }
247 if (region == PCI_ROM_RESOURCE) {
248 dev_dbg(&dev->dev, "no i/o regions available\n");
249 retval = -EBUSY;
250 goto put_hcd;
251 }
252 }
253
254 pci_set_master(dev);
255
256 /* Note: dev_set_drvdata must be called while holding the rwsem */
257 if (dev->class == CL_EHCI) {
258 down_write(&companions_rwsem);
259 dev_set_drvdata(&dev->dev, hcd);
260 for_each_companion(dev, hcd, ehci_pre_add);
261 retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
262 if (retval != 0)
263 dev_set_drvdata(&dev->dev, NULL);
264 for_each_companion(dev, hcd, ehci_post_add);
265 up_write(&companions_rwsem);
266 } else {
267 down_read(&companions_rwsem);
268 dev_set_drvdata(&dev->dev, hcd);
269 retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
270 if (retval != 0)
271 dev_set_drvdata(&dev->dev, NULL);
272 else
273 for_each_companion(dev, hcd, non_ehci_add);
274 up_read(&companions_rwsem);
275 }
276
277 if (retval != 0)
278 goto unmap_registers;
279 device_wakeup_enable(hcd->self.controller);
280
281 if (pci_dev_run_wake(dev))
282 pm_runtime_put_noidle(&dev->dev);
283 return retval;
284
285unmap_registers:
286 if (driver->flags & HCD_MEMORY) {
287 iounmap(hcd->regs);
288release_mem_region:
289 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
290 } else
291 release_region(hcd->rsrc_start, hcd->rsrc_len);
292put_hcd:
293 usb_put_hcd(hcd);
294disable_pci:
295 pci_disable_device(dev);
296 dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval);
297 return retval;
298}
299EXPORT_SYMBOL_GPL(usb_hcd_pci_probe);
300
301
302/* may be called without controller electrically present */
303/* may be called with controller, bus, and devices active */
304
305/**
306 * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs
307 * @dev: USB Host Controller being removed
308 * Context: !in_interrupt()
309 *
310 * Reverses the effect of usb_hcd_pci_probe(), first invoking
311 * the HCD's stop() method. It is always called from a thread
312 * context, normally "rmmod", "apmd", or something similar.
313 *
314 * Store this function in the HCD's struct pci_driver as remove().
315 */
316void usb_hcd_pci_remove(struct pci_dev *dev)
317{
318 struct usb_hcd *hcd;
319
320 hcd = pci_get_drvdata(dev);
321 if (!hcd)
322 return;
323
324 if (pci_dev_run_wake(dev))
325 pm_runtime_get_noresume(&dev->dev);
326
327 /* Fake an interrupt request in order to give the driver a chance
328 * to test whether the controller hardware has been removed (e.g.,
329 * cardbus physical eject).
330 */
331 local_irq_disable();
332 usb_hcd_irq(0, hcd);
333 local_irq_enable();
334
335 /* Note: dev_set_drvdata must be called while holding the rwsem */
336 if (dev->class == CL_EHCI) {
337 down_write(&companions_rwsem);
338 for_each_companion(dev, hcd, ehci_remove);
339 usb_remove_hcd(hcd);
340 dev_set_drvdata(&dev->dev, NULL);
341 up_write(&companions_rwsem);
342 } else {
343 /* Not EHCI; just clear the companion pointer */
344 down_read(&companions_rwsem);
345 hcd->self.hs_companion = NULL;
346 usb_remove_hcd(hcd);
347 dev_set_drvdata(&dev->dev, NULL);
348 up_read(&companions_rwsem);
349 }
350
351 if (hcd->driver->flags & HCD_MEMORY) {
352 iounmap(hcd->regs);
353 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
354 } else {
355 release_region(hcd->rsrc_start, hcd->rsrc_len);
356 }
357
358 usb_put_hcd(hcd);
359 pci_disable_device(dev);
360}
361EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
362
363/**
364 * usb_hcd_pci_shutdown - shutdown host controller
365 * @dev: USB Host Controller being shutdown
366 */
367void usb_hcd_pci_shutdown(struct pci_dev *dev)
368{
369 struct usb_hcd *hcd;
370
371 hcd = pci_get_drvdata(dev);
372 if (!hcd)
373 return;
374
375 if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) &&
376 hcd->driver->shutdown) {
377 hcd->driver->shutdown(hcd);
378 if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
379 free_irq(hcd->irq, hcd);
380 pci_disable_device(dev);
381 }
382}
383EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
384
385#ifdef CONFIG_PM
386
387#ifdef CONFIG_PPC_PMAC
388static void powermac_set_asic(struct pci_dev *pci_dev, int enable)
389{
390 /* Enanble or disable ASIC clocks for USB */
391 if (machine_is(powermac)) {
392 struct device_node *of_node;
393
394 of_node = pci_device_to_OF_node(pci_dev);
395 if (of_node)
396 pmac_call_feature(PMAC_FTR_USB_ENABLE,
397 of_node, 0, enable);
398 }
399}
400
401#else
402
403static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable)
404{}
405
406#endif /* CONFIG_PPC_PMAC */
407
408static int check_root_hub_suspended(struct device *dev)
409{
410 struct pci_dev *pci_dev = to_pci_dev(dev);
411 struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
412
413 if (HCD_RH_RUNNING(hcd)) {
414 dev_warn(dev, "Root hub is not suspended\n");
415 return -EBUSY;
416 }
417 if (hcd->shared_hcd) {
418 hcd = hcd->shared_hcd;
419 if (HCD_RH_RUNNING(hcd)) {
420 dev_warn(dev, "Secondary root hub is not suspended\n");
421 return -EBUSY;
422 }
423 }
424 return 0;
425}
426
427static int suspend_common(struct device *dev, bool do_wakeup)
428{
429 struct pci_dev *pci_dev = to_pci_dev(dev);
430 struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
431 int retval;
432
433 /* Root hub suspend should have stopped all downstream traffic,
434 * and all bus master traffic. And done so for both the interface
435 * and the stub usb_device (which we check here). But maybe it
436 * didn't; writing sysfs power/state files ignores such rules...
437 */
438 retval = check_root_hub_suspended(dev);
439 if (retval)
440 return retval;
441
442 if (hcd->driver->pci_suspend && !HCD_DEAD(hcd)) {
443 /* Optimization: Don't suspend if a root-hub wakeup is
444 * pending and it would cause the HCD to wake up anyway.
445 */
446 if (do_wakeup && HCD_WAKEUP_PENDING(hcd))
447 return -EBUSY;
448 if (do_wakeup && hcd->shared_hcd &&
449 HCD_WAKEUP_PENDING(hcd->shared_hcd))
450 return -EBUSY;
451 retval = hcd->driver->pci_suspend(hcd, do_wakeup);
452 suspend_report_result(hcd->driver->pci_suspend, retval);
453
454 /* Check again in case wakeup raced with pci_suspend */
455 if ((retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) ||
456 (retval == 0 && do_wakeup && hcd->shared_hcd &&
457 HCD_WAKEUP_PENDING(hcd->shared_hcd))) {
458 if (hcd->driver->pci_resume)
459 hcd->driver->pci_resume(hcd, false);
460 retval = -EBUSY;
461 }
462 if (retval)
463 return retval;
464 }
465
466 /* If MSI-X is enabled, the driver will have synchronized all vectors
467 * in pci_suspend(). If MSI or legacy PCI is enabled, that will be
468 * synchronized here.
469 */
470 if (!hcd->msix_enabled)
471 synchronize_irq(pci_dev->irq);
472
473 /* Downstream ports from this root hub should already be quiesced, so
474 * there will be no DMA activity. Now we can shut down the upstream
475 * link (except maybe for PME# resume signaling). We'll enter a
476 * low power state during suspend_noirq, if the hardware allows.
477 */
478 pci_disable_device(pci_dev);
479 return retval;
480}
481
482static int resume_common(struct device *dev, int event)
483{
484 struct pci_dev *pci_dev = to_pci_dev(dev);
485 struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
486 int retval;
487
488 if (HCD_RH_RUNNING(hcd) ||
489 (hcd->shared_hcd &&
490 HCD_RH_RUNNING(hcd->shared_hcd))) {
491 dev_dbg(dev, "can't resume, not suspended!\n");
492 return 0;
493 }
494
495 retval = pci_enable_device(pci_dev);
496 if (retval < 0) {
497 dev_err(dev, "can't re-enable after resume, %d!\n", retval);
498 return retval;
499 }
500
501 pci_set_master(pci_dev);
502
503 if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) {
504
505 /*
506 * Only EHCI controllers have to wait for their companions.
507 * No locking is needed because PCI controller drivers do not
508 * get unbound during system resume.
509 */
510 if (pci_dev->class == CL_EHCI && event != PM_EVENT_AUTO_RESUME)
511 for_each_companion(pci_dev, hcd,
512 ehci_wait_for_companions);
513
514 retval = hcd->driver->pci_resume(hcd,
515 event == PM_EVENT_RESTORE);
516 if (retval) {
517 dev_err(dev, "PCI post-resume error %d!\n", retval);
518 if (hcd->shared_hcd)
519 usb_hc_died(hcd->shared_hcd);
520 usb_hc_died(hcd);
521 }
522 }
523 return retval;
524}
525
526#ifdef CONFIG_PM_SLEEP
527
528static int hcd_pci_suspend(struct device *dev)
529{
530 return suspend_common(dev, device_may_wakeup(dev));
531}
532
533static int hcd_pci_suspend_noirq(struct device *dev)
534{
535 struct pci_dev *pci_dev = to_pci_dev(dev);
536 struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
537 int retval;
538
539 retval = check_root_hub_suspended(dev);
540 if (retval)
541 return retval;
542
543 pci_save_state(pci_dev);
544
545 /* If the root hub is dead rather than suspended, disallow remote
546 * wakeup. usb_hc_died() should ensure that both hosts are marked as
547 * dying, so we only need to check the primary roothub.
548 */
549 if (HCD_DEAD(hcd))
550 device_set_wakeup_enable(dev, 0);
551 dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev));
552
553 /* Possibly enable remote wakeup,
554 * choose the appropriate low-power state, and go to that state.
555 */
556 retval = pci_prepare_to_sleep(pci_dev);
557 if (retval == -EIO) { /* Low-power not supported */
558 dev_dbg(dev, "--> PCI D0 legacy\n");
559 retval = 0;
560 } else if (retval == 0) {
561 dev_dbg(dev, "--> PCI %s\n",
562 pci_power_name(pci_dev->current_state));
563 } else {
564 suspend_report_result(pci_prepare_to_sleep, retval);
565 return retval;
566 }
567
568 powermac_set_asic(pci_dev, 0);
569 return retval;
570}
571
572static int hcd_pci_resume_noirq(struct device *dev)
573{
574 powermac_set_asic(to_pci_dev(dev), 1);
575 return 0;
576}
577
578static int hcd_pci_resume(struct device *dev)
579{
580 return resume_common(dev, PM_EVENT_RESUME);
581}
582
583static int hcd_pci_restore(struct device *dev)
584{
585 return resume_common(dev, PM_EVENT_RESTORE);
586}
587
588#else
589
590#define hcd_pci_suspend NULL
591#define hcd_pci_suspend_noirq NULL
592#define hcd_pci_resume_noirq NULL
593#define hcd_pci_resume NULL
594#define hcd_pci_restore NULL
595
596#endif /* CONFIG_PM_SLEEP */
597
598static int hcd_pci_runtime_suspend(struct device *dev)
599{
600 int retval;
601
602 retval = suspend_common(dev, true);
603 if (retval == 0)
604 powermac_set_asic(to_pci_dev(dev), 0);
605 dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval);
606 return retval;
607}
608
609static int hcd_pci_runtime_resume(struct device *dev)
610{
611 int retval;
612
613 powermac_set_asic(to_pci_dev(dev), 1);
614 retval = resume_common(dev, PM_EVENT_AUTO_RESUME);
615 dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval);
616 return retval;
617}
618
619const struct dev_pm_ops usb_hcd_pci_pm_ops = {
620 .suspend = hcd_pci_suspend,
621 .suspend_noirq = hcd_pci_suspend_noirq,
622 .resume_noirq = hcd_pci_resume_noirq,
623 .resume = hcd_pci_resume,
624 .freeze = check_root_hub_suspended,
625 .freeze_noirq = check_root_hub_suspended,
626 .thaw_noirq = NULL,
627 .thaw = NULL,
628 .poweroff = hcd_pci_suspend,
629 .poweroff_noirq = hcd_pci_suspend_noirq,
630 .restore_noirq = hcd_pci_resume_noirq,
631 .restore = hcd_pci_restore,
632 .runtime_suspend = hcd_pci_runtime_suspend,
633 .runtime_resume = hcd_pci_runtime_resume,
634};
635EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
636
637#endif /* CONFIG_PM */