Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Data Modul AG
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/gpio/gpio.h>
9#include "imx6q.dtsi"
10
11/ {
12 model = "Data Modul eDM-QMX6 Board";
13 compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
14
15 chosen {
16 stdout-path = &uart2;
17 };
18
19 aliases {
20 gpio7 = &stmpe_gpio1;
21 gpio8 = &stmpe_gpio2;
22 stmpe-i2c0 = &stmpe1;
23 stmpe-i2c1 = &stmpe2;
24 };
25
26 memory@10000000 {
27 device_type = "memory";
28 reg = <0x10000000 0x80000000>;
29 };
30
31 regulators {
32 compatible = "simple-bus";
33 #address-cells = <1>;
34 #size-cells = <0>;
35
36 reg_3p3v: regulator@0 {
37 compatible = "regulator-fixed";
38 reg = <0>;
39 regulator-name = "3P3V";
40 regulator-min-microvolt = <3300000>;
41 regulator-max-microvolt = <3300000>;
42 regulator-always-on;
43 };
44
45 reg_usb_otg_switch: regulator@1 {
46 compatible = "regulator-fixed";
47 reg = <1>;
48 regulator-name = "usb_otg_switch";
49 regulator-min-microvolt = <5000000>;
50 regulator-max-microvolt = <5000000>;
51 gpio = <&gpio7 12 0>;
52 regulator-boot-on;
53 regulator-always-on;
54 };
55
56 reg_usb_host1: regulator@2 {
57 compatible = "regulator-fixed";
58 reg = <2>;
59 regulator-name = "usb_host1_en";
60 regulator-min-microvolt = <3300000>;
61 regulator-max-microvolt = <3300000>;
62 gpio = <&gpio3 31 0>;
63 enable-active-high;
64 };
65 };
66
67 gpio-leds {
68 compatible = "gpio-leds";
69
70 led-blue {
71 label = "blue";
72 gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
73 linux,default-trigger = "heartbeat";
74 };
75
76 led-green {
77 label = "green";
78 gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
79 };
80
81 led-pink {
82 label = "pink";
83 gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
84 };
85
86 led-red {
87 label = "red";
88 gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
89 };
90 };
91};
92
93&can1 {
94 pinctrl-names = "default";
95 pinctrl-0 = <&pinctrl_can1>;
96 status = "okay";
97};
98
99&ecspi5 {
100 pinctrl-names = "default";
101 pinctrl-0 = <&pinctrl_ecspi5>;
102 cs-gpios = <&gpio1 12 0>;
103 status = "okay";
104
105 flash: m25p80@0 {
106 compatible = "m25p80", "jedec,spi-nor";
107 spi-max-frequency = <40000000>;
108 reg = <0>;
109 };
110};
111
112&fec {
113 pinctrl-names = "default";
114 pinctrl-0 = <&pinctrl_enet>;
115 phy-mode = "rgmii";
116 phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
117 phy-supply = <&vgen2_1v2_eth>;
118 status = "okay";
119};
120
121&i2c1 {
122 clock-frequency = <100000>;
123 pinctrl-names = "default";
124 pinctrl-0 = <&pinctrl_i2c1>;
125 status = "okay";
126};
127
128&i2c2 {
129 clock-frequency = <100000>;
130 pinctrl-names = "default";
131 pinctrl-0 = <&pinctrl_i2c2
132 &pinctrl_stmpe1
133 &pinctrl_stmpe2
134 &pinctrl_pfuze>;
135 status = "okay";
136
137 pmic: pfuze100@8 {
138 compatible = "fsl,pfuze100";
139 reg = <0x08>;
140 interrupt-parent = <&gpio3>;
141 interrupts = <20 8>;
142
143 regulators {
144 sw1a_reg: sw1ab {
145 regulator-min-microvolt = <300000>;
146 regulator-max-microvolt = <1875000>;
147 regulator-boot-on;
148 regulator-always-on;
149 };
150
151 sw1c_reg: sw1c {
152 regulator-min-microvolt = <300000>;
153 regulator-max-microvolt = <1875000>;
154 regulator-boot-on;
155 regulator-always-on;
156 };
157
158 sw2_reg: sw2 {
159 regulator-min-microvolt = <800000>;
160 regulator-max-microvolt = <3300000>;
161 regulator-boot-on;
162 regulator-always-on;
163 };
164
165 sw3a_reg: sw3a {
166 regulator-min-microvolt = <400000>;
167 regulator-max-microvolt = <1975000>;
168 regulator-boot-on;
169 regulator-always-on;
170 };
171
172 sw3b_reg: sw3b {
173 regulator-min-microvolt = <400000>;
174 regulator-max-microvolt = <1975000>;
175 regulator-boot-on;
176 regulator-always-on;
177 };
178
179 sw4_reg: sw4 {
180 regulator-min-microvolt = <400000>;
181 regulator-max-microvolt = <1975000>;
182 regulator-always-on;
183 };
184
185 swbst_reg: swbst {
186 regulator-min-microvolt = <5000000>;
187 regulator-max-microvolt = <5150000>;
188 regulator-always-on;
189 };
190
191 snvs_reg: vsnvs {
192 regulator-min-microvolt = <1000000>;
193 regulator-max-microvolt = <3000000>;
194 regulator-boot-on;
195 regulator-always-on;
196 };
197
198 vref_reg: vrefddr {
199 regulator-boot-on;
200 regulator-always-on;
201 };
202
203 vgen1_reg: vgen1 {
204 regulator-min-microvolt = <800000>;
205 regulator-max-microvolt = <1550000>;
206 };
207
208 vgen2_1v2_eth: vgen2 {
209 regulator-min-microvolt = <800000>;
210 regulator-max-microvolt = <1550000>;
211 };
212
213 vdd_high_in: vgen3 {
214 regulator-min-microvolt = <1800000>;
215 regulator-max-microvolt = <3300000>;
216 regulator-boot-on;
217 regulator-always-on;
218 };
219
220 vgen4_reg: vgen4 {
221 regulator-min-microvolt = <1800000>;
222 regulator-max-microvolt = <3300000>;
223 regulator-always-on;
224 };
225
226 vgen5_reg: vgen5 {
227 regulator-min-microvolt = <1800000>;
228 regulator-max-microvolt = <3300000>;
229 regulator-always-on;
230 };
231
232 vgen6_reg: vgen6 {
233 regulator-min-microvolt = <1800000>;
234 regulator-max-microvolt = <3300000>;
235 regulator-always-on;
236 };
237 };
238 };
239
240 stmpe1: stmpe1601@40 {
241 compatible = "st,stmpe1601";
242 reg = <0x40>;
243 interrupts = <30 0>;
244 interrupt-parent = <&gpio3>;
245 vcc-supply = <&sw2_reg>;
246 vio-supply = <&sw2_reg>;
247
248 stmpe_gpio1: stmpe_gpio {
249 #gpio-cells = <2>;
250 compatible = "st,stmpe-gpio";
251 };
252 };
253
254 stmpe2: stmpe1601@44 {
255 compatible = "st,stmpe1601";
256 reg = <0x44>;
257 interrupts = <2 0>;
258 interrupt-parent = <&gpio5>;
259 vcc-supply = <&sw2_reg>;
260 vio-supply = <&sw2_reg>;
261
262 stmpe_gpio2: stmpe_gpio {
263 #gpio-cells = <2>;
264 compatible = "st,stmpe-gpio";
265 };
266 };
267
268 temp1: ad7414@4c {
269 compatible = "ad,ad7414";
270 reg = <0x4c>;
271 };
272
273 temp2: ad7414@4d {
274 compatible = "ad,ad7414";
275 reg = <0x4d>;
276 };
277
278 rtc: m41t62@68 {
279 compatible = "st,m41t62";
280 reg = <0x68>;
281 };
282};
283
284&i2c3 {
285 clock-frequency = <100000>;
286 pinctrl-names = "default";
287 pinctrl-0 = <&pinctrl_i2c3>;
288 status = "okay";
289};
290
291&iomuxc {
292 pinctrl-names = "default";
293 pinctrl-0 = <&pinctrl_hog>;
294
295 imx6q-dmo-edmqmx6 {
296 pinctrl_hog: hoggrp {
297 fsl,pins = <
298 MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
299 MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
300 >;
301 };
302
303 pinctrl_can1: can1grp {
304 fsl,pins = <
305 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
306 MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
307 >;
308 };
309
310 pinctrl_ecspi5: ecspi5rp-1 {
311 fsl,pins = <
312 MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000
313 MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000
314 MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000
315 MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x80000000
316 >;
317 };
318
319 pinctrl_enet: enetgrp {
320 fsl,pins = <
321 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
322 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
323 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
324 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
325 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
326 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
327 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
328 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
329 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
330 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
331 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
332 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
333 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
334 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
335 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
336 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
337 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
338 >;
339 };
340
341 pinctrl_i2c1: i2c1grp {
342 fsl,pins = <
343 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
344 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
345 >;
346 };
347
348 pinctrl_i2c2: i2c2grp {
349 fsl,pins = <
350 MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
351 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
352 >;
353 };
354
355 pinctrl_i2c3: i2c3grp {
356 fsl,pins = <
357 MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
358 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
359 >;
360 };
361
362 pinctrl_pcie: pciegrp {
363 fsl,pins = <
364 MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x100b1
365 >;
366 };
367
368 pinctrl_pfuze: pfuze100grp1 {
369 fsl,pins = <
370 MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000
371 >;
372 };
373
374 pinctrl_stmpe1: stmpe1grp {
375 fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
376 };
377
378 pinctrl_stmpe2: stmpe2grp {
379 fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
380 };
381
382 pinctrl_uart1: uart1grp {
383 fsl,pins = <
384 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
385 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
386 >;
387 };
388
389 pinctrl_uart2: uart2grp {
390 fsl,pins = <
391 MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
392 MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
393 >;
394 };
395
396 pinctrl_usbotg: usbotggrp {
397 fsl,pins = <
398 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
399 >;
400 };
401
402 pinctrl_usdhc3: usdhc3grp {
403 fsl,pins = <
404 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
405 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
406 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
407 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
408 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
409 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
410 >;
411 };
412
413 pinctrl_usdhc4: usdhc4grp {
414 fsl,pins = <
415 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
416 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
417 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
418 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
419 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
420 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
421 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
422 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
423 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
424 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
425 >;
426 };
427 };
428};
429
430&pcie {
431 pinctrl-names = "default";
432 pinctrl-0 = <&pinctrl_pcie>;
433 reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
434 status = "okay";
435};
436
437&sata {
438 status = "okay";
439};
440
441&uart1 {
442 pinctrl-names = "default";
443 pinctrl-0 = <&pinctrl_uart1>;
444 status = "okay";
445};
446
447&uart2 {
448 pinctrl-names = "default";
449 pinctrl-0 = <&pinctrl_uart2>;
450 status = "okay";
451};
452
453&usbh1 {
454 vbus-supply = <®_usb_host1>;
455 disable-over-current;
456 dr_mode = "host";
457 status = "okay";
458};
459
460&usbotg {
461 pinctrl-names = "default";
462 pinctrl-0 = <&pinctrl_usbotg>;
463 disable-over-current;
464 status = "okay";
465};
466
467&usdhc3 {
468 pinctrl-names = "default";
469 pinctrl-0 = <&pinctrl_usdhc3>;
470 vmmc-supply = <®_3p3v>;
471 status = "okay";
472};
473
474&usdhc4 {
475 pinctrl-names = "default";
476 pinctrl-0 = <&pinctrl_usdhc4>;
477 vmmc-supply = <®_3p3v>;
478 non-removable;
479 bus-width = <8>;
480 status = "okay";
481};
1/*
2 * Copyright 2013 Data Modul AG
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12/dts-v1/;
13
14#include <dt-bindings/gpio/gpio.h>
15#include "imx6q.dtsi"
16
17/ {
18 model = "Data Modul eDM-QMX6 Board";
19 compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
20
21 chosen {
22 stdout-path = &uart2;
23 };
24
25 aliases {
26 gpio7 = &stmpe_gpio1;
27 gpio8 = &stmpe_gpio2;
28 stmpe-i2c0 = &stmpe1;
29 stmpe-i2c1 = &stmpe2;
30 };
31
32 memory@10000000 {
33 reg = <0x10000000 0x80000000>;
34 };
35
36 regulators {
37 compatible = "simple-bus";
38 #address-cells = <1>;
39 #size-cells = <0>;
40
41 reg_3p3v: regulator@0 {
42 compatible = "regulator-fixed";
43 reg = <0>;
44 regulator-name = "3P3V";
45 regulator-min-microvolt = <3300000>;
46 regulator-max-microvolt = <3300000>;
47 regulator-always-on;
48 };
49
50 reg_usb_otg_switch: regulator@1 {
51 compatible = "regulator-fixed";
52 reg = <1>;
53 regulator-name = "usb_otg_switch";
54 regulator-min-microvolt = <5000000>;
55 regulator-max-microvolt = <5000000>;
56 gpio = <&gpio7 12 0>;
57 regulator-boot-on;
58 regulator-always-on;
59 };
60
61 reg_usb_host1: regulator@2 {
62 compatible = "regulator-fixed";
63 reg = <2>;
64 regulator-name = "usb_host1_en";
65 regulator-min-microvolt = <3300000>;
66 regulator-max-microvolt = <3300000>;
67 gpio = <&gpio3 31 0>;
68 enable-active-high;
69 };
70 };
71
72 gpio-leds {
73 compatible = "gpio-leds";
74
75 led-blue {
76 label = "blue";
77 gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
78 linux,default-trigger = "heartbeat";
79 };
80
81 led-green {
82 label = "green";
83 gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
84 };
85
86 led-pink {
87 label = "pink";
88 gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
89 };
90
91 led-red {
92 label = "red";
93 gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
94 };
95 };
96};
97
98&can1 {
99 pinctrl-names = "default";
100 pinctrl-0 = <&pinctrl_can1>;
101 status = "okay";
102};
103
104&ecspi5 {
105 pinctrl-names = "default";
106 pinctrl-0 = <&pinctrl_ecspi5>;
107 cs-gpios = <&gpio1 12 0>;
108 status = "okay";
109
110 flash: m25p80@0 {
111 compatible = "m25p80", "jedec,spi-nor";
112 spi-max-frequency = <40000000>;
113 reg = <0>;
114 };
115};
116
117&fec {
118 pinctrl-names = "default";
119 pinctrl-0 = <&pinctrl_enet>;
120 phy-mode = "rgmii";
121 phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
122 phy-supply = <&vgen2_1v2_eth>;
123 status = "okay";
124};
125
126&i2c1 {
127 clock-frequency = <100000>;
128 pinctrl-names = "default";
129 pinctrl-0 = <&pinctrl_i2c1>;
130 status = "okay";
131};
132
133&i2c2 {
134 clock-frequency = <100000>;
135 pinctrl-names = "default";
136 pinctrl-0 = <&pinctrl_i2c2
137 &pinctrl_stmpe1
138 &pinctrl_stmpe2
139 &pinctrl_pfuze>;
140 status = "okay";
141
142 pmic: pfuze100@8 {
143 compatible = "fsl,pfuze100";
144 reg = <0x08>;
145 interrupt-parent = <&gpio3>;
146 interrupts = <20 8>;
147
148 regulators {
149 sw1a_reg: sw1ab {
150 regulator-min-microvolt = <300000>;
151 regulator-max-microvolt = <1875000>;
152 regulator-boot-on;
153 regulator-always-on;
154 };
155
156 sw1c_reg: sw1c {
157 regulator-min-microvolt = <300000>;
158 regulator-max-microvolt = <1875000>;
159 regulator-boot-on;
160 regulator-always-on;
161 };
162
163 sw2_reg: sw2 {
164 regulator-min-microvolt = <800000>;
165 regulator-max-microvolt = <3300000>;
166 regulator-boot-on;
167 regulator-always-on;
168 };
169
170 sw3a_reg: sw3a {
171 regulator-min-microvolt = <400000>;
172 regulator-max-microvolt = <1975000>;
173 regulator-boot-on;
174 regulator-always-on;
175 };
176
177 sw3b_reg: sw3b {
178 regulator-min-microvolt = <400000>;
179 regulator-max-microvolt = <1975000>;
180 regulator-boot-on;
181 regulator-always-on;
182 };
183
184 sw4_reg: sw4 {
185 regulator-min-microvolt = <400000>;
186 regulator-max-microvolt = <1975000>;
187 regulator-always-on;
188 };
189
190 swbst_reg: swbst {
191 regulator-min-microvolt = <5000000>;
192 regulator-max-microvolt = <5150000>;
193 regulator-always-on;
194 };
195
196 snvs_reg: vsnvs {
197 regulator-min-microvolt = <1000000>;
198 regulator-max-microvolt = <3000000>;
199 regulator-boot-on;
200 regulator-always-on;
201 };
202
203 vref_reg: vrefddr {
204 regulator-boot-on;
205 regulator-always-on;
206 };
207
208 vgen1_reg: vgen1 {
209 regulator-min-microvolt = <800000>;
210 regulator-max-microvolt = <1550000>;
211 };
212
213 vgen2_1v2_eth: vgen2 {
214 regulator-min-microvolt = <800000>;
215 regulator-max-microvolt = <1550000>;
216 };
217
218 vdd_high_in: vgen3 {
219 regulator-min-microvolt = <1800000>;
220 regulator-max-microvolt = <3300000>;
221 regulator-boot-on;
222 regulator-always-on;
223 };
224
225 vgen4_reg: vgen4 {
226 regulator-min-microvolt = <1800000>;
227 regulator-max-microvolt = <3300000>;
228 regulator-always-on;
229 };
230
231 vgen5_reg: vgen5 {
232 regulator-min-microvolt = <1800000>;
233 regulator-max-microvolt = <3300000>;
234 regulator-always-on;
235 };
236
237 vgen6_reg: vgen6 {
238 regulator-min-microvolt = <1800000>;
239 regulator-max-microvolt = <3300000>;
240 regulator-always-on;
241 };
242 };
243 };
244
245 stmpe1: stmpe1601@40 {
246 compatible = "st,stmpe1601";
247 reg = <0x40>;
248 interrupts = <30 0>;
249 interrupt-parent = <&gpio3>;
250 vcc-supply = <&sw2_reg>;
251 vio-supply = <&sw2_reg>;
252
253 stmpe_gpio1: stmpe_gpio {
254 #gpio-cells = <2>;
255 compatible = "st,stmpe-gpio";
256 };
257 };
258
259 stmpe2: stmpe1601@44 {
260 compatible = "st,stmpe1601";
261 reg = <0x44>;
262 interrupts = <2 0>;
263 interrupt-parent = <&gpio5>;
264 vcc-supply = <&sw2_reg>;
265 vio-supply = <&sw2_reg>;
266
267 stmpe_gpio2: stmpe_gpio {
268 #gpio-cells = <2>;
269 compatible = "st,stmpe-gpio";
270 };
271 };
272
273 temp1: ad7414@4c {
274 compatible = "ad,ad7414";
275 reg = <0x4c>;
276 };
277
278 temp2: ad7414@4d {
279 compatible = "ad,ad7414";
280 reg = <0x4d>;
281 };
282
283 rtc: m41t62@68 {
284 compatible = "st,m41t62";
285 reg = <0x68>;
286 };
287};
288
289&i2c3 {
290 clock-frequency = <100000>;
291 pinctrl-names = "default";
292 pinctrl-0 = <&pinctrl_i2c3>;
293 status = "okay";
294};
295
296&iomuxc {
297 pinctrl-names = "default";
298 pinctrl-0 = <&pinctrl_hog>;
299
300 imx6q-dmo-edmqmx6 {
301 pinctrl_hog: hoggrp {
302 fsl,pins = <
303 MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
304 MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
305 >;
306 };
307
308 pinctrl_can1: can1grp {
309 fsl,pins = <
310 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
311 MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
312 >;
313 };
314
315 pinctrl_ecspi5: ecspi5rp-1 {
316 fsl,pins = <
317 MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000
318 MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000
319 MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000
320 MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x80000000
321 >;
322 };
323
324 pinctrl_enet: enetgrp {
325 fsl,pins = <
326 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
327 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
328 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
329 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
330 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
331 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
332 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
333 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
334 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
335 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
336 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
337 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
338 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
339 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
340 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
341 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
342 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
343 >;
344 };
345
346 pinctrl_i2c1: i2c1grp {
347 fsl,pins = <
348 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
349 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
350 >;
351 };
352
353 pinctrl_i2c2: i2c2grp {
354 fsl,pins = <
355 MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
356 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
357 >;
358 };
359
360 pinctrl_i2c3: i2c3grp {
361 fsl,pins = <
362 MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
363 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
364 >;
365 };
366
367 pinctrl_pcie: pciegrp {
368 fsl,pins = <
369 MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x100b1
370 >;
371 };
372
373 pinctrl_pfuze: pfuze100grp1 {
374 fsl,pins = <
375 MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000
376 >;
377 };
378
379 pinctrl_stmpe1: stmpe1grp {
380 fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
381 };
382
383 pinctrl_stmpe2: stmpe2grp {
384 fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
385 };
386
387 pinctrl_uart1: uart1grp {
388 fsl,pins = <
389 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
390 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
391 >;
392 };
393
394 pinctrl_uart2: uart2grp {
395 fsl,pins = <
396 MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
397 MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
398 >;
399 };
400
401 pinctrl_usbotg: usbotggrp {
402 fsl,pins = <
403 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
404 >;
405 };
406
407 pinctrl_usdhc3: usdhc3grp {
408 fsl,pins = <
409 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
410 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
411 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
412 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
413 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
414 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
415 >;
416 };
417
418 pinctrl_usdhc4: usdhc4grp {
419 fsl,pins = <
420 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
421 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
422 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
423 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
424 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
425 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
426 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
427 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
428 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
429 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
430 >;
431 };
432 };
433};
434
435&pcie {
436 pinctrl-names = "default";
437 pinctrl-0 = <&pinctrl_pcie>;
438 reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
439 status = "okay";
440};
441
442&sata {
443 status = "okay";
444};
445
446&uart1 {
447 pinctrl-names = "default";
448 pinctrl-0 = <&pinctrl_uart1>;
449 status = "okay";
450};
451
452&uart2 {
453 pinctrl-names = "default";
454 pinctrl-0 = <&pinctrl_uart2>;
455 status = "okay";
456};
457
458&usbh1 {
459 vbus-supply = <®_usb_host1>;
460 disable-over-current;
461 dr_mode = "host";
462 status = "okay";
463};
464
465&usbotg {
466 pinctrl-names = "default";
467 pinctrl-0 = <&pinctrl_usbotg>;
468 disable-over-current;
469 status = "okay";
470};
471
472&usdhc3 {
473 pinctrl-names = "default";
474 pinctrl-0 = <&pinctrl_usdhc3>;
475 vmmc-supply = <®_3p3v>;
476 status = "okay";
477};
478
479&usdhc4 {
480 pinctrl-names = "default";
481 pinctrl-0 = <&pinctrl_usdhc4>;
482 vmmc-supply = <®_3p3v>;
483 non-removable;
484 bus-width = <8>;
485 status = "okay";
486};