Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Real Time Clock interface for StrongARM SA1x00 and XScale PXA2xx
4 *
5 * Copyright (c) 2000 Nils Faerber
6 *
7 * Based on rtc.c by Paul Gortmaker
8 *
9 * Original Driver by Nils Faerber <nils@kernelconcepts.de>
10 *
11 * Modifications from:
12 * CIH <cih@coventive.com>
13 * Nicolas Pitre <nico@fluxnic.net>
14 * Andrew Christian <andrew.christian@hp.com>
15 *
16 * Converted to the RTC subsystem and Driver Model
17 * by Richard Purdie <rpurdie@rpsys.net>
18 */
19
20#include <linux/platform_device.h>
21#include <linux/module.h>
22#include <linux/clk.h>
23#include <linux/rtc.h>
24#include <linux/init.h>
25#include <linux/fs.h>
26#include <linux/interrupt.h>
27#include <linux/slab.h>
28#include <linux/string.h>
29#include <linux/of.h>
30#include <linux/pm.h>
31#include <linux/bitops.h>
32#include <linux/io.h>
33
34#define RTSR_HZE BIT(3) /* HZ interrupt enable */
35#define RTSR_ALE BIT(2) /* RTC alarm interrupt enable */
36#define RTSR_HZ BIT(1) /* HZ rising-edge detected */
37#define RTSR_AL BIT(0) /* RTC alarm detected */
38
39#include "rtc-sa1100.h"
40
41#define RTC_DEF_DIVIDER (32768 - 1)
42#define RTC_DEF_TRIM 0
43#define RTC_FREQ 1024
44
45
46static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
47{
48 struct sa1100_rtc *info = dev_get_drvdata(dev_id);
49 struct rtc_device *rtc = info->rtc;
50 unsigned int rtsr;
51 unsigned long events = 0;
52
53 spin_lock(&info->lock);
54
55 rtsr = readl_relaxed(info->rtsr);
56 /* clear interrupt sources */
57 writel_relaxed(0, info->rtsr);
58 /* Fix for a nasty initialization problem the in SA11xx RTSR register.
59 * See also the comments in sa1100_rtc_probe(). */
60 if (rtsr & (RTSR_ALE | RTSR_HZE)) {
61 /* This is the original code, before there was the if test
62 * above. This code does not clear interrupts that were not
63 * enabled. */
64 writel_relaxed((RTSR_AL | RTSR_HZ) & (rtsr >> 2), info->rtsr);
65 } else {
66 /* For some reason, it is possible to enter this routine
67 * without interruptions enabled, it has been tested with
68 * several units (Bug in SA11xx chip?).
69 *
70 * This situation leads to an infinite "loop" of interrupt
71 * routine calling and as a result the processor seems to
72 * lock on its first call to open(). */
73 writel_relaxed(RTSR_AL | RTSR_HZ, info->rtsr);
74 }
75
76 /* clear alarm interrupt if it has occurred */
77 if (rtsr & RTSR_AL)
78 rtsr &= ~RTSR_ALE;
79 writel_relaxed(rtsr & (RTSR_ALE | RTSR_HZE), info->rtsr);
80
81 /* update irq data & counter */
82 if (rtsr & RTSR_AL)
83 events |= RTC_AF | RTC_IRQF;
84 if (rtsr & RTSR_HZ)
85 events |= RTC_UF | RTC_IRQF;
86
87 rtc_update_irq(rtc, 1, events);
88
89 spin_unlock(&info->lock);
90
91 return IRQ_HANDLED;
92}
93
94static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
95{
96 u32 rtsr;
97 struct sa1100_rtc *info = dev_get_drvdata(dev);
98
99 spin_lock_irq(&info->lock);
100 rtsr = readl_relaxed(info->rtsr);
101 if (enabled)
102 rtsr |= RTSR_ALE;
103 else
104 rtsr &= ~RTSR_ALE;
105 writel_relaxed(rtsr, info->rtsr);
106 spin_unlock_irq(&info->lock);
107 return 0;
108}
109
110static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
111{
112 struct sa1100_rtc *info = dev_get_drvdata(dev);
113
114 rtc_time_to_tm(readl_relaxed(info->rcnr), tm);
115 return 0;
116}
117
118static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm)
119{
120 struct sa1100_rtc *info = dev_get_drvdata(dev);
121 unsigned long time;
122 int ret;
123
124 ret = rtc_tm_to_time(tm, &time);
125 if (ret == 0)
126 writel_relaxed(time, info->rcnr);
127 return ret;
128}
129
130static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
131{
132 u32 rtsr;
133 struct sa1100_rtc *info = dev_get_drvdata(dev);
134
135 rtsr = readl_relaxed(info->rtsr);
136 alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0;
137 alrm->pending = (rtsr & RTSR_AL) ? 1 : 0;
138 return 0;
139}
140
141static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
142{
143 struct sa1100_rtc *info = dev_get_drvdata(dev);
144 unsigned long time;
145 int ret;
146
147 spin_lock_irq(&info->lock);
148 ret = rtc_tm_to_time(&alrm->time, &time);
149 if (ret != 0)
150 goto out;
151 writel_relaxed(readl_relaxed(info->rtsr) &
152 (RTSR_HZE | RTSR_ALE | RTSR_AL), info->rtsr);
153 writel_relaxed(time, info->rtar);
154 if (alrm->enabled)
155 writel_relaxed(readl_relaxed(info->rtsr) | RTSR_ALE, info->rtsr);
156 else
157 writel_relaxed(readl_relaxed(info->rtsr) & ~RTSR_ALE, info->rtsr);
158out:
159 spin_unlock_irq(&info->lock);
160
161 return ret;
162}
163
164static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
165{
166 struct sa1100_rtc *info = dev_get_drvdata(dev);
167
168 seq_printf(seq, "trim/divider\t\t: 0x%08x\n", readl_relaxed(info->rttr));
169 seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", readl_relaxed(info->rtsr));
170
171 return 0;
172}
173
174static const struct rtc_class_ops sa1100_rtc_ops = {
175 .read_time = sa1100_rtc_read_time,
176 .set_time = sa1100_rtc_set_time,
177 .read_alarm = sa1100_rtc_read_alarm,
178 .set_alarm = sa1100_rtc_set_alarm,
179 .proc = sa1100_rtc_proc,
180 .alarm_irq_enable = sa1100_rtc_alarm_irq_enable,
181};
182
183int sa1100_rtc_init(struct platform_device *pdev, struct sa1100_rtc *info)
184{
185 struct rtc_device *rtc;
186 int ret;
187
188 spin_lock_init(&info->lock);
189
190 info->clk = devm_clk_get(&pdev->dev, NULL);
191 if (IS_ERR(info->clk)) {
192 dev_err(&pdev->dev, "failed to find rtc clock source\n");
193 return PTR_ERR(info->clk);
194 }
195
196 ret = clk_prepare_enable(info->clk);
197 if (ret)
198 return ret;
199 /*
200 * According to the manual we should be able to let RTTR be zero
201 * and then a default diviser for a 32.768KHz clock is used.
202 * Apparently this doesn't work, at least for my SA1110 rev 5.
203 * If the clock divider is uninitialized then reset it to the
204 * default value to get the 1Hz clock.
205 */
206 if (readl_relaxed(info->rttr) == 0) {
207 writel_relaxed(RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16), info->rttr);
208 dev_warn(&pdev->dev, "warning: "
209 "initializing default clock divider/trim value\n");
210 /* The current RTC value probably doesn't make sense either */
211 writel_relaxed(0, info->rcnr);
212 }
213
214 rtc = devm_rtc_device_register(&pdev->dev, pdev->name, &sa1100_rtc_ops,
215 THIS_MODULE);
216 if (IS_ERR(rtc)) {
217 clk_disable_unprepare(info->clk);
218 return PTR_ERR(rtc);
219 }
220 info->rtc = rtc;
221
222 rtc->max_user_freq = RTC_FREQ;
223
224 /* Fix for a nasty initialization problem the in SA11xx RTSR register.
225 * See also the comments in sa1100_rtc_interrupt().
226 *
227 * Sometimes bit 1 of the RTSR (RTSR_HZ) will wake up 1, which means an
228 * interrupt pending, even though interrupts were never enabled.
229 * In this case, this bit it must be reset before enabling
230 * interruptions to avoid a nonexistent interrupt to occur.
231 *
232 * In principle, the same problem would apply to bit 0, although it has
233 * never been observed to happen.
234 *
235 * This issue is addressed both here and in sa1100_rtc_interrupt().
236 * If the issue is not addressed here, in the times when the processor
237 * wakes up with the bit set there will be one spurious interrupt.
238 *
239 * The issue is also dealt with in sa1100_rtc_interrupt() to be on the
240 * safe side, once the condition that lead to this strange
241 * initialization is unknown and could in principle happen during
242 * normal processing.
243 *
244 * Notice that clearing bit 1 and 0 is accomplished by writting ONES to
245 * the corresponding bits in RTSR. */
246 writel_relaxed(RTSR_AL | RTSR_HZ, info->rtsr);
247
248 return 0;
249}
250EXPORT_SYMBOL_GPL(sa1100_rtc_init);
251
252static int sa1100_rtc_probe(struct platform_device *pdev)
253{
254 struct sa1100_rtc *info;
255 struct resource *iores;
256 void __iomem *base;
257 int irq_1hz, irq_alarm;
258 int ret;
259
260 irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
261 irq_alarm = platform_get_irq_byname(pdev, "rtc alarm");
262 if (irq_1hz < 0 || irq_alarm < 0)
263 return -ENODEV;
264
265 info = devm_kzalloc(&pdev->dev, sizeof(struct sa1100_rtc), GFP_KERNEL);
266 if (!info)
267 return -ENOMEM;
268 info->irq_1hz = irq_1hz;
269 info->irq_alarm = irq_alarm;
270
271 ret = devm_request_irq(&pdev->dev, irq_1hz, sa1100_rtc_interrupt, 0,
272 "rtc 1Hz", &pdev->dev);
273 if (ret) {
274 dev_err(&pdev->dev, "IRQ %d already in use.\n", irq_1hz);
275 return ret;
276 }
277 ret = devm_request_irq(&pdev->dev, irq_alarm, sa1100_rtc_interrupt, 0,
278 "rtc Alrm", &pdev->dev);
279 if (ret) {
280 dev_err(&pdev->dev, "IRQ %d already in use.\n", irq_alarm);
281 return ret;
282 }
283
284 iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
285 base = devm_ioremap_resource(&pdev->dev, iores);
286 if (IS_ERR(base))
287 return PTR_ERR(base);
288
289 if (IS_ENABLED(CONFIG_ARCH_SA1100) ||
290 of_device_is_compatible(pdev->dev.of_node, "mrvl,sa1100-rtc")) {
291 info->rcnr = base + 0x04;
292 info->rtsr = base + 0x10;
293 info->rtar = base + 0x00;
294 info->rttr = base + 0x08;
295 } else {
296 info->rcnr = base + 0x0;
297 info->rtsr = base + 0x8;
298 info->rtar = base + 0x4;
299 info->rttr = base + 0xc;
300 }
301
302 platform_set_drvdata(pdev, info);
303 device_init_wakeup(&pdev->dev, 1);
304
305 return sa1100_rtc_init(pdev, info);
306}
307
308static int sa1100_rtc_remove(struct platform_device *pdev)
309{
310 struct sa1100_rtc *info = platform_get_drvdata(pdev);
311
312 if (info) {
313 spin_lock_irq(&info->lock);
314 writel_relaxed(0, info->rtsr);
315 spin_unlock_irq(&info->lock);
316 clk_disable_unprepare(info->clk);
317 }
318
319 return 0;
320}
321
322#ifdef CONFIG_PM_SLEEP
323static int sa1100_rtc_suspend(struct device *dev)
324{
325 struct sa1100_rtc *info = dev_get_drvdata(dev);
326 if (device_may_wakeup(dev))
327 enable_irq_wake(info->irq_alarm);
328 return 0;
329}
330
331static int sa1100_rtc_resume(struct device *dev)
332{
333 struct sa1100_rtc *info = dev_get_drvdata(dev);
334 if (device_may_wakeup(dev))
335 disable_irq_wake(info->irq_alarm);
336 return 0;
337}
338#endif
339
340static SIMPLE_DEV_PM_OPS(sa1100_rtc_pm_ops, sa1100_rtc_suspend,
341 sa1100_rtc_resume);
342
343#ifdef CONFIG_OF
344static const struct of_device_id sa1100_rtc_dt_ids[] = {
345 { .compatible = "mrvl,sa1100-rtc", },
346 { .compatible = "mrvl,mmp-rtc", },
347 {}
348};
349MODULE_DEVICE_TABLE(of, sa1100_rtc_dt_ids);
350#endif
351
352static struct platform_driver sa1100_rtc_driver = {
353 .probe = sa1100_rtc_probe,
354 .remove = sa1100_rtc_remove,
355 .driver = {
356 .name = "sa1100-rtc",
357 .pm = &sa1100_rtc_pm_ops,
358 .of_match_table = of_match_ptr(sa1100_rtc_dt_ids),
359 },
360};
361
362module_platform_driver(sa1100_rtc_driver);
363
364MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
365MODULE_DESCRIPTION("SA11x0/PXA2xx Realtime Clock Driver (RTC)");
366MODULE_LICENSE("GPL");
367MODULE_ALIAS("platform:sa1100-rtc");
1/*
2 * Real Time Clock interface for StrongARM SA1x00 and XScale PXA2xx
3 *
4 * Copyright (c) 2000 Nils Faerber
5 *
6 * Based on rtc.c by Paul Gortmaker
7 *
8 * Original Driver by Nils Faerber <nils@kernelconcepts.de>
9 *
10 * Modifications from:
11 * CIH <cih@coventive.com>
12 * Nicolas Pitre <nico@fluxnic.net>
13 * Andrew Christian <andrew.christian@hp.com>
14 *
15 * Converted to the RTC subsystem and Driver Model
16 * by Richard Purdie <rpurdie@rpsys.net>
17 *
18 * This program is free software; you can redistribute it and/or
19 * modify it under the terms of the GNU General Public License
20 * as published by the Free Software Foundation; either version
21 * 2 of the License, or (at your option) any later version.
22 */
23
24#include <linux/platform_device.h>
25#include <linux/module.h>
26#include <linux/clk.h>
27#include <linux/rtc.h>
28#include <linux/init.h>
29#include <linux/fs.h>
30#include <linux/interrupt.h>
31#include <linux/slab.h>
32#include <linux/string.h>
33#include <linux/of.h>
34#include <linux/pm.h>
35#include <linux/bitops.h>
36#include <linux/io.h>
37
38#define RTSR_HZE BIT(3) /* HZ interrupt enable */
39#define RTSR_ALE BIT(2) /* RTC alarm interrupt enable */
40#define RTSR_HZ BIT(1) /* HZ rising-edge detected */
41#define RTSR_AL BIT(0) /* RTC alarm detected */
42
43#include "rtc-sa1100.h"
44
45#define RTC_DEF_DIVIDER (32768 - 1)
46#define RTC_DEF_TRIM 0
47#define RTC_FREQ 1024
48
49
50static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
51{
52 struct sa1100_rtc *info = dev_get_drvdata(dev_id);
53 struct rtc_device *rtc = info->rtc;
54 unsigned int rtsr;
55 unsigned long events = 0;
56
57 spin_lock(&info->lock);
58
59 rtsr = readl_relaxed(info->rtsr);
60 /* clear interrupt sources */
61 writel_relaxed(0, info->rtsr);
62 /* Fix for a nasty initialization problem the in SA11xx RTSR register.
63 * See also the comments in sa1100_rtc_probe(). */
64 if (rtsr & (RTSR_ALE | RTSR_HZE)) {
65 /* This is the original code, before there was the if test
66 * above. This code does not clear interrupts that were not
67 * enabled. */
68 writel_relaxed((RTSR_AL | RTSR_HZ) & (rtsr >> 2), info->rtsr);
69 } else {
70 /* For some reason, it is possible to enter this routine
71 * without interruptions enabled, it has been tested with
72 * several units (Bug in SA11xx chip?).
73 *
74 * This situation leads to an infinite "loop" of interrupt
75 * routine calling and as a result the processor seems to
76 * lock on its first call to open(). */
77 writel_relaxed(RTSR_AL | RTSR_HZ, info->rtsr);
78 }
79
80 /* clear alarm interrupt if it has occurred */
81 if (rtsr & RTSR_AL)
82 rtsr &= ~RTSR_ALE;
83 writel_relaxed(rtsr & (RTSR_ALE | RTSR_HZE), info->rtsr);
84
85 /* update irq data & counter */
86 if (rtsr & RTSR_AL)
87 events |= RTC_AF | RTC_IRQF;
88 if (rtsr & RTSR_HZ)
89 events |= RTC_UF | RTC_IRQF;
90
91 rtc_update_irq(rtc, 1, events);
92
93 spin_unlock(&info->lock);
94
95 return IRQ_HANDLED;
96}
97
98static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
99{
100 u32 rtsr;
101 struct sa1100_rtc *info = dev_get_drvdata(dev);
102
103 spin_lock_irq(&info->lock);
104 rtsr = readl_relaxed(info->rtsr);
105 if (enabled)
106 rtsr |= RTSR_ALE;
107 else
108 rtsr &= ~RTSR_ALE;
109 writel_relaxed(rtsr, info->rtsr);
110 spin_unlock_irq(&info->lock);
111 return 0;
112}
113
114static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
115{
116 struct sa1100_rtc *info = dev_get_drvdata(dev);
117
118 rtc_time_to_tm(readl_relaxed(info->rcnr), tm);
119 return 0;
120}
121
122static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm)
123{
124 struct sa1100_rtc *info = dev_get_drvdata(dev);
125 unsigned long time;
126 int ret;
127
128 ret = rtc_tm_to_time(tm, &time);
129 if (ret == 0)
130 writel_relaxed(time, info->rcnr);
131 return ret;
132}
133
134static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
135{
136 u32 rtsr;
137 struct sa1100_rtc *info = dev_get_drvdata(dev);
138
139 rtsr = readl_relaxed(info->rtsr);
140 alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0;
141 alrm->pending = (rtsr & RTSR_AL) ? 1 : 0;
142 return 0;
143}
144
145static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
146{
147 struct sa1100_rtc *info = dev_get_drvdata(dev);
148 unsigned long time;
149 int ret;
150
151 spin_lock_irq(&info->lock);
152 ret = rtc_tm_to_time(&alrm->time, &time);
153 if (ret != 0)
154 goto out;
155 writel_relaxed(readl_relaxed(info->rtsr) &
156 (RTSR_HZE | RTSR_ALE | RTSR_AL), info->rtsr);
157 writel_relaxed(time, info->rtar);
158 if (alrm->enabled)
159 writel_relaxed(readl_relaxed(info->rtsr) | RTSR_ALE, info->rtsr);
160 else
161 writel_relaxed(readl_relaxed(info->rtsr) & ~RTSR_ALE, info->rtsr);
162out:
163 spin_unlock_irq(&info->lock);
164
165 return ret;
166}
167
168static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
169{
170 struct sa1100_rtc *info = dev_get_drvdata(dev);
171
172 seq_printf(seq, "trim/divider\t\t: 0x%08x\n", readl_relaxed(info->rttr));
173 seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", readl_relaxed(info->rtsr));
174
175 return 0;
176}
177
178static const struct rtc_class_ops sa1100_rtc_ops = {
179 .read_time = sa1100_rtc_read_time,
180 .set_time = sa1100_rtc_set_time,
181 .read_alarm = sa1100_rtc_read_alarm,
182 .set_alarm = sa1100_rtc_set_alarm,
183 .proc = sa1100_rtc_proc,
184 .alarm_irq_enable = sa1100_rtc_alarm_irq_enable,
185};
186
187int sa1100_rtc_init(struct platform_device *pdev, struct sa1100_rtc *info)
188{
189 struct rtc_device *rtc;
190 int ret;
191
192 spin_lock_init(&info->lock);
193
194 info->clk = devm_clk_get(&pdev->dev, NULL);
195 if (IS_ERR(info->clk)) {
196 dev_err(&pdev->dev, "failed to find rtc clock source\n");
197 return PTR_ERR(info->clk);
198 }
199
200 ret = clk_prepare_enable(info->clk);
201 if (ret)
202 return ret;
203 /*
204 * According to the manual we should be able to let RTTR be zero
205 * and then a default diviser for a 32.768KHz clock is used.
206 * Apparently this doesn't work, at least for my SA1110 rev 5.
207 * If the clock divider is uninitialized then reset it to the
208 * default value to get the 1Hz clock.
209 */
210 if (readl_relaxed(info->rttr) == 0) {
211 writel_relaxed(RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16), info->rttr);
212 dev_warn(&pdev->dev, "warning: "
213 "initializing default clock divider/trim value\n");
214 /* The current RTC value probably doesn't make sense either */
215 writel_relaxed(0, info->rcnr);
216 }
217
218 rtc = devm_rtc_device_register(&pdev->dev, pdev->name, &sa1100_rtc_ops,
219 THIS_MODULE);
220 if (IS_ERR(rtc)) {
221 clk_disable_unprepare(info->clk);
222 return PTR_ERR(rtc);
223 }
224 info->rtc = rtc;
225
226 rtc->max_user_freq = RTC_FREQ;
227 rtc_irq_set_freq(rtc, NULL, RTC_FREQ);
228
229 /* Fix for a nasty initialization problem the in SA11xx RTSR register.
230 * See also the comments in sa1100_rtc_interrupt().
231 *
232 * Sometimes bit 1 of the RTSR (RTSR_HZ) will wake up 1, which means an
233 * interrupt pending, even though interrupts were never enabled.
234 * In this case, this bit it must be reset before enabling
235 * interruptions to avoid a nonexistent interrupt to occur.
236 *
237 * In principle, the same problem would apply to bit 0, although it has
238 * never been observed to happen.
239 *
240 * This issue is addressed both here and in sa1100_rtc_interrupt().
241 * If the issue is not addressed here, in the times when the processor
242 * wakes up with the bit set there will be one spurious interrupt.
243 *
244 * The issue is also dealt with in sa1100_rtc_interrupt() to be on the
245 * safe side, once the condition that lead to this strange
246 * initialization is unknown and could in principle happen during
247 * normal processing.
248 *
249 * Notice that clearing bit 1 and 0 is accomplished by writting ONES to
250 * the corresponding bits in RTSR. */
251 writel_relaxed(RTSR_AL | RTSR_HZ, info->rtsr);
252
253 return 0;
254}
255EXPORT_SYMBOL_GPL(sa1100_rtc_init);
256
257static int sa1100_rtc_probe(struct platform_device *pdev)
258{
259 struct sa1100_rtc *info;
260 struct resource *iores;
261 void __iomem *base;
262 int irq_1hz, irq_alarm;
263 int ret;
264
265 irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
266 irq_alarm = platform_get_irq_byname(pdev, "rtc alarm");
267 if (irq_1hz < 0 || irq_alarm < 0)
268 return -ENODEV;
269
270 info = devm_kzalloc(&pdev->dev, sizeof(struct sa1100_rtc), GFP_KERNEL);
271 if (!info)
272 return -ENOMEM;
273 info->irq_1hz = irq_1hz;
274 info->irq_alarm = irq_alarm;
275
276 ret = devm_request_irq(&pdev->dev, irq_1hz, sa1100_rtc_interrupt, 0,
277 "rtc 1Hz", &pdev->dev);
278 if (ret) {
279 dev_err(&pdev->dev, "IRQ %d already in use.\n", irq_1hz);
280 return ret;
281 }
282 ret = devm_request_irq(&pdev->dev, irq_alarm, sa1100_rtc_interrupt, 0,
283 "rtc Alrm", &pdev->dev);
284 if (ret) {
285 dev_err(&pdev->dev, "IRQ %d already in use.\n", irq_alarm);
286 return ret;
287 }
288
289 iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
290 base = devm_ioremap_resource(&pdev->dev, iores);
291 if (IS_ERR(base))
292 return PTR_ERR(base);
293
294 if (IS_ENABLED(CONFIG_ARCH_SA1100) ||
295 of_device_is_compatible(pdev->dev.of_node, "mrvl,sa1100-rtc")) {
296 info->rcnr = base + 0x04;
297 info->rtsr = base + 0x10;
298 info->rtar = base + 0x00;
299 info->rttr = base + 0x08;
300 } else {
301 info->rcnr = base + 0x0;
302 info->rtsr = base + 0x8;
303 info->rtar = base + 0x4;
304 info->rttr = base + 0xc;
305 }
306
307 platform_set_drvdata(pdev, info);
308 device_init_wakeup(&pdev->dev, 1);
309
310 return sa1100_rtc_init(pdev, info);
311}
312
313static int sa1100_rtc_remove(struct platform_device *pdev)
314{
315 struct sa1100_rtc *info = platform_get_drvdata(pdev);
316
317 if (info) {
318 spin_lock_irq(&info->lock);
319 writel_relaxed(0, info->rtsr);
320 spin_unlock_irq(&info->lock);
321 clk_disable_unprepare(info->clk);
322 }
323
324 return 0;
325}
326
327#ifdef CONFIG_PM_SLEEP
328static int sa1100_rtc_suspend(struct device *dev)
329{
330 struct sa1100_rtc *info = dev_get_drvdata(dev);
331 if (device_may_wakeup(dev))
332 enable_irq_wake(info->irq_alarm);
333 return 0;
334}
335
336static int sa1100_rtc_resume(struct device *dev)
337{
338 struct sa1100_rtc *info = dev_get_drvdata(dev);
339 if (device_may_wakeup(dev))
340 disable_irq_wake(info->irq_alarm);
341 return 0;
342}
343#endif
344
345static SIMPLE_DEV_PM_OPS(sa1100_rtc_pm_ops, sa1100_rtc_suspend,
346 sa1100_rtc_resume);
347
348#ifdef CONFIG_OF
349static const struct of_device_id sa1100_rtc_dt_ids[] = {
350 { .compatible = "mrvl,sa1100-rtc", },
351 { .compatible = "mrvl,mmp-rtc", },
352 {}
353};
354MODULE_DEVICE_TABLE(of, sa1100_rtc_dt_ids);
355#endif
356
357static struct platform_driver sa1100_rtc_driver = {
358 .probe = sa1100_rtc_probe,
359 .remove = sa1100_rtc_remove,
360 .driver = {
361 .name = "sa1100-rtc",
362 .pm = &sa1100_rtc_pm_ops,
363 .of_match_table = of_match_ptr(sa1100_rtc_dt_ids),
364 },
365};
366
367module_platform_driver(sa1100_rtc_driver);
368
369MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
370MODULE_DESCRIPTION("SA11x0/PXA2xx Realtime Clock Driver (RTC)");
371MODULE_LICENSE("GPL");
372MODULE_ALIAS("platform:sa1100-rtc");