Linux Audio

Check our new training course

Loading...
v5.4
  1/*
  2 * Copyright (c) 2006-2008 Intel Corporation
  3 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
  4 * Copyright (c) 2008 Red Hat Inc.
  5 *
  6 * DRM core CRTC related functions
  7 *
  8 * Permission to use, copy, modify, distribute, and sell this software and its
  9 * documentation for any purpose is hereby granted without fee, provided that
 10 * the above copyright notice appear in all copies and that both that copyright
 11 * notice and this permission notice appear in supporting documentation, and
 12 * that the name of the copyright holders not be used in advertising or
 13 * publicity pertaining to distribution of the software without specific,
 14 * written prior permission.  The copyright holders make no representations
 15 * about the suitability of this software for any purpose.  It is provided "as
 16 * is" without express or implied warranty.
 17 *
 18 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
 19 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
 20 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
 21 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
 22 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
 23 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
 24 * OF THIS SOFTWARE.
 25 *
 26 * Authors:
 27 *      Keith Packard
 28 *	Eric Anholt <eric@anholt.net>
 29 *      Dave Airlie <airlied@linux.ie>
 30 *      Jesse Barnes <jesse.barnes@intel.com>
 31 */
 32#include <linux/ctype.h>
 33#include <linux/list.h>
 34#include <linux/slab.h>
 35#include <linux/export.h>
 36#include <linux/dma-fence.h>
 37#include <linux/uaccess.h>
 38#include <drm/drm_crtc.h>
 39#include <drm/drm_edid.h>
 40#include <drm/drm_fourcc.h>
 41#include <drm/drm_modeset_lock.h>
 42#include <drm/drm_atomic.h>
 43#include <drm/drm_auth.h>
 44#include <drm/drm_debugfs_crc.h>
 45#include <drm/drm_drv.h>
 46#include <drm/drm_print.h>
 47#include <drm/drm_file.h>
 48
 49#include "drm_crtc_internal.h"
 50#include "drm_internal.h"
 51
 52/**
 53 * DOC: overview
 
 54 *
 55 * A CRTC represents the overall display pipeline. It receives pixel data from
 56 * &drm_plane and blends them together. The &drm_display_mode is also attached
 57 * to the CRTC, specifying display timings. On the output side the data is fed
 58 * to one or more &drm_encoder, which are then each connected to one
 59 * &drm_connector.
 60 *
 61 * To create a CRTC, a KMS drivers allocates and zeroes an instances of
 62 * &struct drm_crtc (possibly as part of a larger structure) and registers it
 63 * with a call to drm_crtc_init_with_planes().
 64 *
 65 * The CRTC is also the entry point for legacy modeset operations, see
 66 * &drm_crtc_funcs.set_config, legacy plane operations, see
 67 * &drm_crtc_funcs.page_flip and &drm_crtc_funcs.cursor_set2, and other legacy
 68 * operations like &drm_crtc_funcs.gamma_set. For atomic drivers all these
 69 * features are controlled through &drm_property and
 70 * &drm_mode_config_funcs.atomic_check and &drm_mode_config_funcs.atomic_check.
 71 */
 
 
 
 
 
 
 
 
 
 72
 73/**
 74 * drm_crtc_from_index - find the registered CRTC at an index
 75 * @dev: DRM device
 76 * @idx: index of registered CRTC to find for
 77 *
 78 * Given a CRTC index, return the registered CRTC from DRM device's
 79 * list of CRTCs with matching index. This is the inverse of drm_crtc_index().
 80 * It's useful in the vblank callbacks (like &drm_driver.enable_vblank or
 81 * &drm_driver.disable_vblank), since that still deals with indices instead
 82 * of pointers to &struct drm_crtc."
 83 */
 84struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx)
 85{
 86	struct drm_crtc *crtc;
 
 87
 
 88	drm_for_each_crtc(crtc, dev)
 89		if (idx == crtc->index)
 90			return crtc;
 91
 92	return NULL;
 93}
 94EXPORT_SYMBOL(drm_crtc_from_index);
 95
 96int drm_crtc_force_disable(struct drm_crtc *crtc)
 97{
 98	struct drm_mode_set set = {
 99		.crtc = crtc,
100	};
101
102	WARN_ON(drm_drv_uses_atomic_modeset(crtc->dev));
103
104	return drm_mode_set_config_internal(&set);
105}
 
106
107static unsigned int drm_num_crtcs(struct drm_device *dev)
108{
109	unsigned int num = 0;
110	struct drm_crtc *tmp;
111
112	drm_for_each_crtc(tmp, dev) {
113		num++;
114	}
115
116	return num;
117}
118
119int drm_crtc_register_all(struct drm_device *dev)
120{
121	struct drm_crtc *crtc;
122	int ret = 0;
123
124	drm_for_each_crtc(crtc, dev) {
125		drm_debugfs_crtc_add(crtc);
 
 
126
127		if (crtc->funcs->late_register)
128			ret = crtc->funcs->late_register(crtc);
129		if (ret)
130			return ret;
131	}
132
133	return 0;
134}
135
136void drm_crtc_unregister_all(struct drm_device *dev)
137{
138	struct drm_crtc *crtc;
139
140	drm_for_each_crtc(crtc, dev) {
141		if (crtc->funcs->early_unregister)
142			crtc->funcs->early_unregister(crtc);
143		drm_debugfs_crtc_remove(crtc);
144	}
145}
146
147static int drm_crtc_crc_init(struct drm_crtc *crtc)
148{
149#ifdef CONFIG_DEBUG_FS
150	spin_lock_init(&crtc->crc.lock);
151	init_waitqueue_head(&crtc->crc.wq);
152	crtc->crc.source = kstrdup("auto", GFP_KERNEL);
153	if (!crtc->crc.source)
154		return -ENOMEM;
155#endif
156	return 0;
157}
158
159static void drm_crtc_crc_fini(struct drm_crtc *crtc)
160{
161#ifdef CONFIG_DEBUG_FS
162	kfree(crtc->crc.source);
163#endif
164}
165
166static const struct dma_fence_ops drm_crtc_fence_ops;
167
168static struct drm_crtc *fence_to_crtc(struct dma_fence *fence)
169{
170	BUG_ON(fence->ops != &drm_crtc_fence_ops);
171	return container_of(fence->lock, struct drm_crtc, fence_lock);
172}
173
174static const char *drm_crtc_fence_get_driver_name(struct dma_fence *fence)
175{
176	struct drm_crtc *crtc = fence_to_crtc(fence);
177
178	return crtc->dev->driver->name;
179}
180
181static const char *drm_crtc_fence_get_timeline_name(struct dma_fence *fence)
182{
183	struct drm_crtc *crtc = fence_to_crtc(fence);
184
185	return crtc->timeline_name;
186}
187
 
 
 
 
 
188static const struct dma_fence_ops drm_crtc_fence_ops = {
189	.get_driver_name = drm_crtc_fence_get_driver_name,
190	.get_timeline_name = drm_crtc_fence_get_timeline_name,
 
 
191};
192
193struct dma_fence *drm_crtc_create_fence(struct drm_crtc *crtc)
194{
195	struct dma_fence *fence;
196
197	fence = kzalloc(sizeof(*fence), GFP_KERNEL);
198	if (!fence)
199		return NULL;
200
201	dma_fence_init(fence, &drm_crtc_fence_ops, &crtc->fence_lock,
202		       crtc->fence_context, ++crtc->fence_seqno);
203
204	return fence;
205}
206
207/**
208 * drm_crtc_init_with_planes - Initialise a new CRTC object with
209 *    specified primary and cursor planes.
210 * @dev: DRM device
211 * @crtc: CRTC object to init
212 * @primary: Primary plane for CRTC
213 * @cursor: Cursor plane for CRTC
214 * @funcs: callbacks for the new CRTC
215 * @name: printf style format string for the CRTC name, or NULL for default name
216 *
217 * Inits a new object created as base part of a driver crtc object. Drivers
218 * should use this function instead of drm_crtc_init(), which is only provided
219 * for backwards compatibility with drivers which do not yet support universal
220 * planes). For really simple hardware which has only 1 plane look at
221 * drm_simple_display_pipe_init() instead.
222 *
223 * Returns:
224 * Zero on success, error code on failure.
225 */
226int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc,
227			      struct drm_plane *primary,
228			      struct drm_plane *cursor,
229			      const struct drm_crtc_funcs *funcs,
230			      const char *name, ...)
231{
232	struct drm_mode_config *config = &dev->mode_config;
233	int ret;
234
235	WARN_ON(primary && primary->type != DRM_PLANE_TYPE_PRIMARY);
236	WARN_ON(cursor && cursor->type != DRM_PLANE_TYPE_CURSOR);
237
238	/* crtc index is used with 32bit bitmasks */
239	if (WARN_ON(config->num_crtc >= 32))
240		return -EINVAL;
241
242	WARN_ON(drm_drv_uses_atomic_modeset(dev) &&
243		(!funcs->atomic_destroy_state ||
244		 !funcs->atomic_duplicate_state));
245
246	crtc->dev = dev;
247	crtc->funcs = funcs;
248
249	INIT_LIST_HEAD(&crtc->commit_list);
250	spin_lock_init(&crtc->commit_lock);
251
252	drm_modeset_lock_init(&crtc->mutex);
253	ret = drm_mode_object_add(dev, &crtc->base, DRM_MODE_OBJECT_CRTC);
254	if (ret)
255		return ret;
256
257	if (name) {
258		va_list ap;
259
260		va_start(ap, name);
261		crtc->name = kvasprintf(GFP_KERNEL, name, ap);
262		va_end(ap);
263	} else {
264		crtc->name = kasprintf(GFP_KERNEL, "crtc-%d",
265				       drm_num_crtcs(dev));
266	}
267	if (!crtc->name) {
268		drm_mode_object_unregister(dev, &crtc->base);
269		return -ENOMEM;
270	}
271
272	crtc->fence_context = dma_fence_context_alloc(1);
273	spin_lock_init(&crtc->fence_lock);
274	snprintf(crtc->timeline_name, sizeof(crtc->timeline_name),
275		 "CRTC:%d-%s", crtc->base.id, crtc->name);
276
277	crtc->base.properties = &crtc->properties;
278
279	list_add_tail(&crtc->head, &config->crtc_list);
280	crtc->index = config->num_crtc++;
281
282	crtc->primary = primary;
283	crtc->cursor = cursor;
284	if (primary && !primary->possible_crtcs)
285		primary->possible_crtcs = drm_crtc_mask(crtc);
286	if (cursor && !cursor->possible_crtcs)
287		cursor->possible_crtcs = drm_crtc_mask(crtc);
288
289	ret = drm_crtc_crc_init(crtc);
290	if (ret) {
291		drm_mode_object_unregister(dev, &crtc->base);
292		return ret;
293	}
294
295	if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
296		drm_object_attach_property(&crtc->base, config->prop_active, 0);
297		drm_object_attach_property(&crtc->base, config->prop_mode_id, 0);
298		drm_object_attach_property(&crtc->base,
299					   config->prop_out_fence_ptr, 0);
300		drm_object_attach_property(&crtc->base,
301					   config->prop_vrr_enabled, 0);
302	}
303
304	return 0;
305}
306EXPORT_SYMBOL(drm_crtc_init_with_planes);
307
308/**
309 * drm_crtc_cleanup - Clean up the core crtc usage
310 * @crtc: CRTC to cleanup
311 *
312 * This function cleans up @crtc and removes it from the DRM mode setting
313 * core. Note that the function does *not* free the crtc structure itself,
314 * this is the responsibility of the caller.
315 */
316void drm_crtc_cleanup(struct drm_crtc *crtc)
317{
318	struct drm_device *dev = crtc->dev;
319
320	/* Note that the crtc_list is considered to be static; should we
321	 * remove the drm_crtc at runtime we would have to decrement all
322	 * the indices on the drm_crtc after us in the crtc_list.
323	 */
324
325	drm_crtc_crc_fini(crtc);
326
327	kfree(crtc->gamma_store);
328	crtc->gamma_store = NULL;
329
330	drm_modeset_lock_fini(&crtc->mutex);
331
332	drm_mode_object_unregister(dev, &crtc->base);
333	list_del(&crtc->head);
334	dev->mode_config.num_crtc--;
335
336	WARN_ON(crtc->state && !crtc->funcs->atomic_destroy_state);
337	if (crtc->state && crtc->funcs->atomic_destroy_state)
338		crtc->funcs->atomic_destroy_state(crtc, crtc->state);
339
340	kfree(crtc->name);
341
342	memset(crtc, 0, sizeof(*crtc));
343}
344EXPORT_SYMBOL(drm_crtc_cleanup);
345
346/**
347 * drm_mode_getcrtc - get CRTC configuration
348 * @dev: drm device for the ioctl
349 * @data: data pointer for the ioctl
350 * @file_priv: drm file for the ioctl call
351 *
352 * Construct a CRTC configuration structure to return to the user.
353 *
354 * Called by the user via ioctl.
355 *
356 * Returns:
357 * Zero on success, negative errno on failure.
358 */
359int drm_mode_getcrtc(struct drm_device *dev,
360		     void *data, struct drm_file *file_priv)
361{
362	struct drm_mode_crtc *crtc_resp = data;
363	struct drm_crtc *crtc;
364	struct drm_plane *plane;
365
366	if (!drm_core_check_feature(dev, DRIVER_MODESET))
367		return -EOPNOTSUPP;
368
369	crtc = drm_crtc_find(dev, file_priv, crtc_resp->crtc_id);
370	if (!crtc)
371		return -ENOENT;
372
373	plane = crtc->primary;
374
375	crtc_resp->gamma_size = crtc->gamma_size;
376
377	drm_modeset_lock(&plane->mutex, NULL);
378	if (plane->state && plane->state->fb)
379		crtc_resp->fb_id = plane->state->fb->base.id;
380	else if (!plane->state && plane->fb)
381		crtc_resp->fb_id = plane->fb->base.id;
382	else
383		crtc_resp->fb_id = 0;
384
385	if (plane->state) {
386		crtc_resp->x = plane->state->src_x >> 16;
387		crtc_resp->y = plane->state->src_y >> 16;
388	}
389	drm_modeset_unlock(&plane->mutex);
390
391	drm_modeset_lock(&crtc->mutex, NULL);
392	if (crtc->state) {
 
 
393		if (crtc->state->enable) {
394			drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->state->mode);
395			crtc_resp->mode_valid = 1;
 
396		} else {
397			crtc_resp->mode_valid = 0;
398		}
399	} else {
400		crtc_resp->x = crtc->x;
401		crtc_resp->y = crtc->y;
402
403		if (crtc->enabled) {
404			drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->mode);
405			crtc_resp->mode_valid = 1;
406
407		} else {
408			crtc_resp->mode_valid = 0;
409		}
410	}
411	if (!file_priv->aspect_ratio_allowed)
412		crtc_resp->mode.flags &= ~DRM_MODE_FLAG_PIC_AR_MASK;
413	drm_modeset_unlock(&crtc->mutex);
414
415	return 0;
416}
417
418static int __drm_mode_set_config_internal(struct drm_mode_set *set,
419					  struct drm_modeset_acquire_ctx *ctx)
 
 
 
 
 
 
 
 
 
420{
421	struct drm_crtc *crtc = set->crtc;
422	struct drm_framebuffer *fb;
423	struct drm_crtc *tmp;
424	int ret;
425
426	WARN_ON(drm_drv_uses_atomic_modeset(crtc->dev));
427
428	/*
429	 * NOTE: ->set_config can also disable other crtcs (if we steal all
430	 * connectors from it), hence we need to refcount the fbs across all
431	 * crtcs. Atomic modeset will have saner semantics ...
432	 */
433	drm_for_each_crtc(tmp, crtc->dev) {
434		struct drm_plane *plane = tmp->primary;
435
436		plane->old_fb = plane->fb;
437	}
438
439	fb = set->fb;
440
441	ret = crtc->funcs->set_config(set, ctx);
442	if (ret == 0) {
443		struct drm_plane *plane = crtc->primary;
444
445		plane->crtc = fb ? crtc : NULL;
446		plane->fb = fb;
447	}
448
449	drm_for_each_crtc(tmp, crtc->dev) {
450		struct drm_plane *plane = tmp->primary;
451
452		if (plane->fb)
453			drm_framebuffer_get(plane->fb);
454		if (plane->old_fb)
455			drm_framebuffer_put(plane->old_fb);
456		plane->old_fb = NULL;
457	}
458
459	return ret;
460}
 
461
462/**
463 * drm_mode_set_config_internal - helper to call &drm_mode_config_funcs.set_config
464 * @set: modeset config to set
465 *
466 * This is a little helper to wrap internal calls to the
467 * &drm_mode_config_funcs.set_config driver interface. The only thing it adds is
468 * correct refcounting dance.
469 *
470 * This should only be used by non-atomic legacy drivers.
471 *
472 * Returns:
473 * Zero on success, negative errno on failure.
474 */
475int drm_mode_set_config_internal(struct drm_mode_set *set)
 
476{
477	WARN_ON(drm_drv_uses_atomic_modeset(set->crtc->dev));
478
479	return __drm_mode_set_config_internal(set, NULL);
 
 
 
480}
481EXPORT_SYMBOL(drm_mode_set_config_internal);
482
483/**
484 * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
485 *     CRTC viewport
486 * @crtc: CRTC that framebuffer will be displayed on
487 * @x: x panning
488 * @y: y panning
489 * @mode: mode that framebuffer will be displayed under
490 * @fb: framebuffer to check size of
491 */
492int drm_crtc_check_viewport(const struct drm_crtc *crtc,
493			    int x, int y,
494			    const struct drm_display_mode *mode,
495			    const struct drm_framebuffer *fb)
496
497{
498	int hdisplay, vdisplay;
499
500	drm_mode_get_hv_timing(mode, &hdisplay, &vdisplay);
501
502	if (crtc->state &&
503	    drm_rotation_90_or_270(crtc->primary->state->rotation))
504		swap(hdisplay, vdisplay);
505
506	return drm_framebuffer_check_src_coords(x << 16, y << 16,
507						hdisplay << 16, vdisplay << 16,
508						fb);
509}
510EXPORT_SYMBOL(drm_crtc_check_viewport);
511
512/**
513 * drm_mode_setcrtc - set CRTC configuration
514 * @dev: drm device for the ioctl
515 * @data: data pointer for the ioctl
516 * @file_priv: drm file for the ioctl call
517 *
518 * Build a new CRTC configuration based on user request.
519 *
520 * Called by the user via ioctl.
521 *
522 * Returns:
523 * Zero on success, negative errno on failure.
524 */
525int drm_mode_setcrtc(struct drm_device *dev, void *data,
526		     struct drm_file *file_priv)
527{
528	struct drm_mode_config *config = &dev->mode_config;
529	struct drm_mode_crtc *crtc_req = data;
530	struct drm_crtc *crtc;
531	struct drm_plane *plane;
532	struct drm_connector **connector_set = NULL, *connector;
533	struct drm_framebuffer *fb = NULL;
534	struct drm_display_mode *mode = NULL;
535	struct drm_mode_set set;
536	uint32_t __user *set_connectors_ptr;
537	struct drm_modeset_acquire_ctx ctx;
538	int ret;
539	int i;
540
541	if (!drm_core_check_feature(dev, DRIVER_MODESET))
542		return -EOPNOTSUPP;
543
544	/*
545	 * Universal plane src offsets are only 16.16, prevent havoc for
546	 * drivers using universal plane code internally.
547	 */
548	if (crtc_req->x & 0xffff0000 || crtc_req->y & 0xffff0000)
549		return -ERANGE;
550
551	crtc = drm_crtc_find(dev, file_priv, crtc_req->crtc_id);
 
552	if (!crtc) {
553		DRM_DEBUG_KMS("Unknown CRTC ID %d\n", crtc_req->crtc_id);
554		return -ENOENT;
 
555	}
556	DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name);
557
558	plane = crtc->primary;
559
560	/* allow disabling with the primary plane leased */
561	if (crtc_req->mode_valid && !drm_lease_held(file_priv, plane->base.id))
562		return -EACCES;
563
564	mutex_lock(&crtc->dev->mode_config.mutex);
565	DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx,
566				   DRM_MODESET_ACQUIRE_INTERRUPTIBLE, ret);
567
568	if (crtc_req->mode_valid) {
569		/* If we have a mode we need a framebuffer. */
570		/* If we pass -1, set the mode with the currently bound fb */
571		if (crtc_req->fb_id == -1) {
572			struct drm_framebuffer *old_fb;
573
574			if (plane->state)
575				old_fb = plane->state->fb;
576			else
577				old_fb = plane->fb;
578
579			if (!old_fb) {
580				DRM_DEBUG_KMS("CRTC doesn't have current FB\n");
581				ret = -EINVAL;
582				goto out;
583			}
584
585			fb = old_fb;
586			/* Make refcounting symmetric with the lookup path. */
587			drm_framebuffer_get(fb);
588		} else {
589			fb = drm_framebuffer_lookup(dev, file_priv, crtc_req->fb_id);
590			if (!fb) {
591				DRM_DEBUG_KMS("Unknown FB ID%d\n",
592						crtc_req->fb_id);
593				ret = -ENOENT;
594				goto out;
595			}
596		}
597
598		mode = drm_mode_create(dev);
599		if (!mode) {
600			ret = -ENOMEM;
601			goto out;
602		}
603		if (!file_priv->aspect_ratio_allowed &&
604		    (crtc_req->mode.flags & DRM_MODE_FLAG_PIC_AR_MASK) != DRM_MODE_FLAG_PIC_AR_NONE) {
605			DRM_DEBUG_KMS("Unexpected aspect-ratio flag bits\n");
606			ret = -EINVAL;
607			goto out;
608		}
609
610
611		ret = drm_mode_convert_umode(dev, mode, &crtc_req->mode);
612		if (ret) {
613			DRM_DEBUG_KMS("Invalid mode (ret=%d, status=%s)\n",
614				      ret, drm_get_mode_status_name(mode->status));
615			drm_mode_debug_printmodeline(mode);
616			goto out;
617		}
618
619		/*
620		 * Check whether the primary plane supports the fb pixel format.
621		 * Drivers not implementing the universal planes API use a
622		 * default formats list provided by the DRM core which doesn't
623		 * match real hardware capabilities. Skip the check in that
624		 * case.
625		 */
626		if (!plane->format_default) {
627			ret = drm_plane_check_pixel_format(plane,
628							   fb->format->format,
629							   fb->modifier);
630			if (ret) {
631				struct drm_format_name_buf format_name;
632				DRM_DEBUG_KMS("Invalid pixel format %s, modifier 0x%llx\n",
633					      drm_get_format_name(fb->format->format,
634								  &format_name),
635					      fb->modifier);
636				goto out;
637			}
638		}
639
640		ret = drm_crtc_check_viewport(crtc, crtc_req->x, crtc_req->y,
641					      mode, fb);
642		if (ret)
643			goto out;
644
645	}
646
647	if (crtc_req->count_connectors == 0 && mode) {
648		DRM_DEBUG_KMS("Count connectors is 0 but mode set\n");
649		ret = -EINVAL;
650		goto out;
651	}
652
653	if (crtc_req->count_connectors > 0 && (!mode || !fb)) {
654		DRM_DEBUG_KMS("Count connectors is %d but no mode or fb set\n",
655			  crtc_req->count_connectors);
656		ret = -EINVAL;
657		goto out;
658	}
659
660	if (crtc_req->count_connectors > 0) {
661		u32 out_id;
662
663		/* Avoid unbounded kernel memory allocation */
664		if (crtc_req->count_connectors > config->num_connector) {
665			ret = -EINVAL;
666			goto out;
667		}
668
669		connector_set = kmalloc_array(crtc_req->count_connectors,
670					      sizeof(struct drm_connector *),
671					      GFP_KERNEL);
672		if (!connector_set) {
673			ret = -ENOMEM;
674			goto out;
675		}
676
677		for (i = 0; i < crtc_req->count_connectors; i++) {
678			connector_set[i] = NULL;
679			set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr;
680			if (get_user(out_id, &set_connectors_ptr[i])) {
681				ret = -EFAULT;
682				goto out;
683			}
684
685			connector = drm_connector_lookup(dev, file_priv, out_id);
686			if (!connector) {
687				DRM_DEBUG_KMS("Connector id %d unknown\n",
688						out_id);
689				ret = -ENOENT;
690				goto out;
691			}
692			DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
693					connector->base.id,
694					connector->name);
695
696			connector_set[i] = connector;
697		}
698	}
699
700	set.crtc = crtc;
701	set.x = crtc_req->x;
702	set.y = crtc_req->y;
703	set.mode = mode;
704	set.connectors = connector_set;
705	set.num_connectors = crtc_req->count_connectors;
706	set.fb = fb;
707
708	if (drm_drv_uses_atomic_modeset(dev))
709		ret = crtc->funcs->set_config(&set, &ctx);
710	else
711		ret = __drm_mode_set_config_internal(&set, &ctx);
712
713out:
714	if (fb)
715		drm_framebuffer_put(fb);
716
717	if (connector_set) {
718		for (i = 0; i < crtc_req->count_connectors; i++) {
719			if (connector_set[i])
720				drm_connector_put(connector_set[i]);
721		}
722	}
723	kfree(connector_set);
724	drm_mode_destroy(dev, mode);
725
726	/* In case we need to retry... */
727	connector_set = NULL;
728	fb = NULL;
729	mode = NULL;
730
731	DRM_MODESET_LOCK_ALL_END(ctx, ret);
732	mutex_unlock(&crtc->dev->mode_config.mutex);
733
734	return ret;
735}
736
737int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj,
738			       struct drm_property *property,
739			       uint64_t value)
740{
741	int ret = -EINVAL;
742	struct drm_crtc *crtc = obj_to_crtc(obj);
743
744	if (crtc->funcs->set_property)
745		ret = crtc->funcs->set_property(crtc, property, value);
746	if (!ret)
747		drm_object_property_set_value(obj, property, value);
748
749	return ret;
750}
v4.10.11
  1/*
  2 * Copyright (c) 2006-2008 Intel Corporation
  3 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
  4 * Copyright (c) 2008 Red Hat Inc.
  5 *
  6 * DRM core CRTC related functions
  7 *
  8 * Permission to use, copy, modify, distribute, and sell this software and its
  9 * documentation for any purpose is hereby granted without fee, provided that
 10 * the above copyright notice appear in all copies and that both that copyright
 11 * notice and this permission notice appear in supporting documentation, and
 12 * that the name of the copyright holders not be used in advertising or
 13 * publicity pertaining to distribution of the software without specific,
 14 * written prior permission.  The copyright holders make no representations
 15 * about the suitability of this software for any purpose.  It is provided "as
 16 * is" without express or implied warranty.
 17 *
 18 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
 19 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
 20 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
 21 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
 22 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
 23 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
 24 * OF THIS SOFTWARE.
 25 *
 26 * Authors:
 27 *      Keith Packard
 28 *	Eric Anholt <eric@anholt.net>
 29 *      Dave Airlie <airlied@linux.ie>
 30 *      Jesse Barnes <jesse.barnes@intel.com>
 31 */
 32#include <linux/ctype.h>
 33#include <linux/list.h>
 34#include <linux/slab.h>
 35#include <linux/export.h>
 36#include <linux/dma-fence.h>
 37#include <drm/drmP.h>
 38#include <drm/drm_crtc.h>
 39#include <drm/drm_edid.h>
 40#include <drm/drm_fourcc.h>
 41#include <drm/drm_modeset_lock.h>
 42#include <drm/drm_atomic.h>
 43#include <drm/drm_auth.h>
 44#include <drm/drm_debugfs_crc.h>
 
 
 
 45
 46#include "drm_crtc_internal.h"
 47#include "drm_internal.h"
 48
 49/**
 50 * drm_crtc_force_disable - Forcibly turn off a CRTC
 51 * @crtc: CRTC to turn off
 52 *
 53 * Returns:
 54 * Zero on success, error code on failure.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 55 */
 56int drm_crtc_force_disable(struct drm_crtc *crtc)
 57{
 58	struct drm_mode_set set = {
 59		.crtc = crtc,
 60	};
 61
 62	return drm_mode_set_config_internal(&set);
 63}
 64EXPORT_SYMBOL(drm_crtc_force_disable);
 65
 66/**
 67 * drm_crtc_force_disable_all - Forcibly turn off all enabled CRTCs
 68 * @dev: DRM device whose CRTCs to turn off
 
 69 *
 70 * Drivers may want to call this on unload to ensure that all displays are
 71 * unlit and the GPU is in a consistent, low power state. Takes modeset locks.
 72 *
 73 * Returns:
 74 * Zero on success, error code on failure.
 75 */
 76int drm_crtc_force_disable_all(struct drm_device *dev)
 77{
 78	struct drm_crtc *crtc;
 79	int ret = 0;
 80
 81	drm_modeset_lock_all(dev);
 82	drm_for_each_crtc(crtc, dev)
 83		if (crtc->enabled) {
 84			ret = drm_crtc_force_disable(crtc);
 85			if (ret)
 86				goto out;
 87		}
 88out:
 89	drm_modeset_unlock_all(dev);
 90	return ret;
 
 
 
 
 
 
 
 
 91}
 92EXPORT_SYMBOL(drm_crtc_force_disable_all);
 93
 94static unsigned int drm_num_crtcs(struct drm_device *dev)
 95{
 96	unsigned int num = 0;
 97	struct drm_crtc *tmp;
 98
 99	drm_for_each_crtc(tmp, dev) {
100		num++;
101	}
102
103	return num;
104}
105
106int drm_crtc_register_all(struct drm_device *dev)
107{
108	struct drm_crtc *crtc;
109	int ret = 0;
110
111	drm_for_each_crtc(crtc, dev) {
112		if (drm_debugfs_crtc_add(crtc))
113			DRM_ERROR("Failed to initialize debugfs entry for CRTC '%s'.\n",
114				  crtc->name);
115
116		if (crtc->funcs->late_register)
117			ret = crtc->funcs->late_register(crtc);
118		if (ret)
119			return ret;
120	}
121
122	return 0;
123}
124
125void drm_crtc_unregister_all(struct drm_device *dev)
126{
127	struct drm_crtc *crtc;
128
129	drm_for_each_crtc(crtc, dev) {
130		if (crtc->funcs->early_unregister)
131			crtc->funcs->early_unregister(crtc);
132		drm_debugfs_crtc_remove(crtc);
133	}
134}
135
136static int drm_crtc_crc_init(struct drm_crtc *crtc)
137{
138#ifdef CONFIG_DEBUG_FS
139	spin_lock_init(&crtc->crc.lock);
140	init_waitqueue_head(&crtc->crc.wq);
141	crtc->crc.source = kstrdup("auto", GFP_KERNEL);
142	if (!crtc->crc.source)
143		return -ENOMEM;
144#endif
145	return 0;
146}
147
148static void drm_crtc_crc_fini(struct drm_crtc *crtc)
149{
150#ifdef CONFIG_DEBUG_FS
151	kfree(crtc->crc.source);
152#endif
153}
154
155static const struct dma_fence_ops drm_crtc_fence_ops;
156
157static struct drm_crtc *fence_to_crtc(struct dma_fence *fence)
158{
159	BUG_ON(fence->ops != &drm_crtc_fence_ops);
160	return container_of(fence->lock, struct drm_crtc, fence_lock);
161}
162
163static const char *drm_crtc_fence_get_driver_name(struct dma_fence *fence)
164{
165	struct drm_crtc *crtc = fence_to_crtc(fence);
166
167	return crtc->dev->driver->name;
168}
169
170static const char *drm_crtc_fence_get_timeline_name(struct dma_fence *fence)
171{
172	struct drm_crtc *crtc = fence_to_crtc(fence);
173
174	return crtc->timeline_name;
175}
176
177static bool drm_crtc_fence_enable_signaling(struct dma_fence *fence)
178{
179	return true;
180}
181
182static const struct dma_fence_ops drm_crtc_fence_ops = {
183	.get_driver_name = drm_crtc_fence_get_driver_name,
184	.get_timeline_name = drm_crtc_fence_get_timeline_name,
185	.enable_signaling = drm_crtc_fence_enable_signaling,
186	.wait = dma_fence_default_wait,
187};
188
189struct dma_fence *drm_crtc_create_fence(struct drm_crtc *crtc)
190{
191	struct dma_fence *fence;
192
193	fence = kzalloc(sizeof(*fence), GFP_KERNEL);
194	if (!fence)
195		return NULL;
196
197	dma_fence_init(fence, &drm_crtc_fence_ops, &crtc->fence_lock,
198		       crtc->fence_context, ++crtc->fence_seqno);
199
200	return fence;
201}
202
203/**
204 * drm_crtc_init_with_planes - Initialise a new CRTC object with
205 *    specified primary and cursor planes.
206 * @dev: DRM device
207 * @crtc: CRTC object to init
208 * @primary: Primary plane for CRTC
209 * @cursor: Cursor plane for CRTC
210 * @funcs: callbacks for the new CRTC
211 * @name: printf style format string for the CRTC name, or NULL for default name
212 *
213 * Inits a new object created as base part of a driver crtc object. Drivers
214 * should use this function instead of drm_crtc_init(), which is only provided
215 * for backwards compatibility with drivers which do not yet support universal
216 * planes). For really simple hardware which has only 1 plane look at
217 * drm_simple_display_pipe_init() instead.
218 *
219 * Returns:
220 * Zero on success, error code on failure.
221 */
222int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc,
223			      struct drm_plane *primary,
224			      struct drm_plane *cursor,
225			      const struct drm_crtc_funcs *funcs,
226			      const char *name, ...)
227{
228	struct drm_mode_config *config = &dev->mode_config;
229	int ret;
230
231	WARN_ON(primary && primary->type != DRM_PLANE_TYPE_PRIMARY);
232	WARN_ON(cursor && cursor->type != DRM_PLANE_TYPE_CURSOR);
233
 
 
 
 
 
 
 
 
234	crtc->dev = dev;
235	crtc->funcs = funcs;
236
237	INIT_LIST_HEAD(&crtc->commit_list);
238	spin_lock_init(&crtc->commit_lock);
239
240	drm_modeset_lock_init(&crtc->mutex);
241	ret = drm_mode_object_get(dev, &crtc->base, DRM_MODE_OBJECT_CRTC);
242	if (ret)
243		return ret;
244
245	if (name) {
246		va_list ap;
247
248		va_start(ap, name);
249		crtc->name = kvasprintf(GFP_KERNEL, name, ap);
250		va_end(ap);
251	} else {
252		crtc->name = kasprintf(GFP_KERNEL, "crtc-%d",
253				       drm_num_crtcs(dev));
254	}
255	if (!crtc->name) {
256		drm_mode_object_unregister(dev, &crtc->base);
257		return -ENOMEM;
258	}
259
260	crtc->fence_context = dma_fence_context_alloc(1);
261	spin_lock_init(&crtc->fence_lock);
262	snprintf(crtc->timeline_name, sizeof(crtc->timeline_name),
263		 "CRTC:%d-%s", crtc->base.id, crtc->name);
264
265	crtc->base.properties = &crtc->properties;
266
267	list_add_tail(&crtc->head, &config->crtc_list);
268	crtc->index = config->num_crtc++;
269
270	crtc->primary = primary;
271	crtc->cursor = cursor;
272	if (primary && !primary->possible_crtcs)
273		primary->possible_crtcs = 1 << drm_crtc_index(crtc);
274	if (cursor && !cursor->possible_crtcs)
275		cursor->possible_crtcs = 1 << drm_crtc_index(crtc);
276
277	ret = drm_crtc_crc_init(crtc);
278	if (ret) {
279		drm_mode_object_unregister(dev, &crtc->base);
280		return ret;
281	}
282
283	if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
284		drm_object_attach_property(&crtc->base, config->prop_active, 0);
285		drm_object_attach_property(&crtc->base, config->prop_mode_id, 0);
286		drm_object_attach_property(&crtc->base,
287					   config->prop_out_fence_ptr, 0);
 
 
288	}
289
290	return 0;
291}
292EXPORT_SYMBOL(drm_crtc_init_with_planes);
293
294/**
295 * drm_crtc_cleanup - Clean up the core crtc usage
296 * @crtc: CRTC to cleanup
297 *
298 * This function cleans up @crtc and removes it from the DRM mode setting
299 * core. Note that the function does *not* free the crtc structure itself,
300 * this is the responsibility of the caller.
301 */
302void drm_crtc_cleanup(struct drm_crtc *crtc)
303{
304	struct drm_device *dev = crtc->dev;
305
306	/* Note that the crtc_list is considered to be static; should we
307	 * remove the drm_crtc at runtime we would have to decrement all
308	 * the indices on the drm_crtc after us in the crtc_list.
309	 */
310
311	drm_crtc_crc_fini(crtc);
312
313	kfree(crtc->gamma_store);
314	crtc->gamma_store = NULL;
315
316	drm_modeset_lock_fini(&crtc->mutex);
317
318	drm_mode_object_unregister(dev, &crtc->base);
319	list_del(&crtc->head);
320	dev->mode_config.num_crtc--;
321
322	WARN_ON(crtc->state && !crtc->funcs->atomic_destroy_state);
323	if (crtc->state && crtc->funcs->atomic_destroy_state)
324		crtc->funcs->atomic_destroy_state(crtc, crtc->state);
325
326	kfree(crtc->name);
327
328	memset(crtc, 0, sizeof(*crtc));
329}
330EXPORT_SYMBOL(drm_crtc_cleanup);
331
332/**
333 * drm_mode_getcrtc - get CRTC configuration
334 * @dev: drm device for the ioctl
335 * @data: data pointer for the ioctl
336 * @file_priv: drm file for the ioctl call
337 *
338 * Construct a CRTC configuration structure to return to the user.
339 *
340 * Called by the user via ioctl.
341 *
342 * Returns:
343 * Zero on success, negative errno on failure.
344 */
345int drm_mode_getcrtc(struct drm_device *dev,
346		     void *data, struct drm_file *file_priv)
347{
348	struct drm_mode_crtc *crtc_resp = data;
349	struct drm_crtc *crtc;
 
350
351	if (!drm_core_check_feature(dev, DRIVER_MODESET))
352		return -EINVAL;
353
354	crtc = drm_crtc_find(dev, crtc_resp->crtc_id);
355	if (!crtc)
356		return -ENOENT;
357
358	drm_modeset_lock_crtc(crtc, crtc->primary);
 
359	crtc_resp->gamma_size = crtc->gamma_size;
360	if (crtc->primary->fb)
361		crtc_resp->fb_id = crtc->primary->fb->base.id;
 
 
 
 
362	else
363		crtc_resp->fb_id = 0;
364
 
 
 
 
 
 
 
365	if (crtc->state) {
366		crtc_resp->x = crtc->primary->state->src_x >> 16;
367		crtc_resp->y = crtc->primary->state->src_y >> 16;
368		if (crtc->state->enable) {
369			drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->state->mode);
370			crtc_resp->mode_valid = 1;
371
372		} else {
373			crtc_resp->mode_valid = 0;
374		}
375	} else {
376		crtc_resp->x = crtc->x;
377		crtc_resp->y = crtc->y;
 
378		if (crtc->enabled) {
379			drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->mode);
380			crtc_resp->mode_valid = 1;
381
382		} else {
383			crtc_resp->mode_valid = 0;
384		}
385	}
386	drm_modeset_unlock_crtc(crtc);
 
 
387
388	return 0;
389}
390
391/**
392 * drm_mode_set_config_internal - helper to call ->set_config
393 * @set: modeset config to set
394 *
395 * This is a little helper to wrap internal calls to the ->set_config driver
396 * interface. The only thing it adds is correct refcounting dance.
397 *
398 * Returns:
399 * Zero on success, negative errno on failure.
400 */
401int drm_mode_set_config_internal(struct drm_mode_set *set)
402{
403	struct drm_crtc *crtc = set->crtc;
404	struct drm_framebuffer *fb;
405	struct drm_crtc *tmp;
406	int ret;
407
 
 
408	/*
409	 * NOTE: ->set_config can also disable other crtcs (if we steal all
410	 * connectors from it), hence we need to refcount the fbs across all
411	 * crtcs. Atomic modeset will have saner semantics ...
412	 */
413	drm_for_each_crtc(tmp, crtc->dev)
414		tmp->primary->old_fb = tmp->primary->fb;
 
 
 
415
416	fb = set->fb;
417
418	ret = crtc->funcs->set_config(set);
419	if (ret == 0) {
420		crtc->primary->crtc = crtc;
421		crtc->primary->fb = fb;
 
 
422	}
423
424	drm_for_each_crtc(tmp, crtc->dev) {
425		if (tmp->primary->fb)
426			drm_framebuffer_reference(tmp->primary->fb);
427		if (tmp->primary->old_fb)
428			drm_framebuffer_unreference(tmp->primary->old_fb);
429		tmp->primary->old_fb = NULL;
 
 
430	}
431
432	return ret;
433}
434EXPORT_SYMBOL(drm_mode_set_config_internal);
435
436/**
437 * drm_crtc_get_hv_timing - Fetches hdisplay/vdisplay for given mode
438 * @mode: mode to query
439 * @hdisplay: hdisplay value to fill in
440 * @vdisplay: vdisplay value to fill in
 
 
 
 
441 *
442 * The vdisplay value will be doubled if the specified mode is a stereo mode of
443 * the appropriate layout.
444 */
445void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
446			    int *hdisplay, int *vdisplay)
447{
448	struct drm_display_mode adjusted;
449
450	drm_mode_copy(&adjusted, mode);
451	drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE_ONLY);
452	*hdisplay = adjusted.crtc_hdisplay;
453	*vdisplay = adjusted.crtc_vdisplay;
454}
455EXPORT_SYMBOL(drm_crtc_get_hv_timing);
456
457/**
458 * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
459 *     CRTC viewport
460 * @crtc: CRTC that framebuffer will be displayed on
461 * @x: x panning
462 * @y: y panning
463 * @mode: mode that framebuffer will be displayed under
464 * @fb: framebuffer to check size of
465 */
466int drm_crtc_check_viewport(const struct drm_crtc *crtc,
467			    int x, int y,
468			    const struct drm_display_mode *mode,
469			    const struct drm_framebuffer *fb)
470
471{
472	int hdisplay, vdisplay;
473
474	drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
475
476	if (crtc->state &&
477	    drm_rotation_90_or_270(crtc->primary->state->rotation))
478		swap(hdisplay, vdisplay);
479
480	return drm_framebuffer_check_src_coords(x << 16, y << 16,
481						hdisplay << 16, vdisplay << 16,
482						fb);
483}
484EXPORT_SYMBOL(drm_crtc_check_viewport);
485
486/**
487 * drm_mode_setcrtc - set CRTC configuration
488 * @dev: drm device for the ioctl
489 * @data: data pointer for the ioctl
490 * @file_priv: drm file for the ioctl call
491 *
492 * Build a new CRTC configuration based on user request.
493 *
494 * Called by the user via ioctl.
495 *
496 * Returns:
497 * Zero on success, negative errno on failure.
498 */
499int drm_mode_setcrtc(struct drm_device *dev, void *data,
500		     struct drm_file *file_priv)
501{
502	struct drm_mode_config *config = &dev->mode_config;
503	struct drm_mode_crtc *crtc_req = data;
504	struct drm_crtc *crtc;
 
505	struct drm_connector **connector_set = NULL, *connector;
506	struct drm_framebuffer *fb = NULL;
507	struct drm_display_mode *mode = NULL;
508	struct drm_mode_set set;
509	uint32_t __user *set_connectors_ptr;
 
510	int ret;
511	int i;
512
513	if (!drm_core_check_feature(dev, DRIVER_MODESET))
514		return -EINVAL;
515
516	/*
517	 * Universal plane src offsets are only 16.16, prevent havoc for
518	 * drivers using universal plane code internally.
519	 */
520	if (crtc_req->x & 0xffff0000 || crtc_req->y & 0xffff0000)
521		return -ERANGE;
522
523	drm_modeset_lock_all(dev);
524	crtc = drm_crtc_find(dev, crtc_req->crtc_id);
525	if (!crtc) {
526		DRM_DEBUG_KMS("Unknown CRTC ID %d\n", crtc_req->crtc_id);
527		ret = -ENOENT;
528		goto out;
529	}
530	DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name);
531
 
 
 
 
 
 
 
 
 
 
532	if (crtc_req->mode_valid) {
533		/* If we have a mode we need a framebuffer. */
534		/* If we pass -1, set the mode with the currently bound fb */
535		if (crtc_req->fb_id == -1) {
536			if (!crtc->primary->fb) {
 
 
 
 
 
 
 
537				DRM_DEBUG_KMS("CRTC doesn't have current FB\n");
538				ret = -EINVAL;
539				goto out;
540			}
541			fb = crtc->primary->fb;
 
542			/* Make refcounting symmetric with the lookup path. */
543			drm_framebuffer_reference(fb);
544		} else {
545			fb = drm_framebuffer_lookup(dev, crtc_req->fb_id);
546			if (!fb) {
547				DRM_DEBUG_KMS("Unknown FB ID%d\n",
548						crtc_req->fb_id);
549				ret = -ENOENT;
550				goto out;
551			}
552		}
553
554		mode = drm_mode_create(dev);
555		if (!mode) {
556			ret = -ENOMEM;
557			goto out;
558		}
 
 
 
 
 
 
 
559
560		ret = drm_mode_convert_umode(mode, &crtc_req->mode);
561		if (ret) {
562			DRM_DEBUG_KMS("Invalid mode\n");
 
 
563			goto out;
564		}
565
566		/*
567		 * Check whether the primary plane supports the fb pixel format.
568		 * Drivers not implementing the universal planes API use a
569		 * default formats list provided by the DRM core which doesn't
570		 * match real hardware capabilities. Skip the check in that
571		 * case.
572		 */
573		if (!crtc->primary->format_default) {
574			ret = drm_plane_check_pixel_format(crtc->primary,
575							   fb->pixel_format);
 
576			if (ret) {
577				struct drm_format_name_buf format_name;
578				DRM_DEBUG_KMS("Invalid pixel format %s\n",
579				              drm_get_format_name(fb->pixel_format,
580				                                  &format_name));
 
581				goto out;
582			}
583		}
584
585		ret = drm_crtc_check_viewport(crtc, crtc_req->x, crtc_req->y,
586					      mode, fb);
587		if (ret)
588			goto out;
589
590	}
591
592	if (crtc_req->count_connectors == 0 && mode) {
593		DRM_DEBUG_KMS("Count connectors is 0 but mode set\n");
594		ret = -EINVAL;
595		goto out;
596	}
597
598	if (crtc_req->count_connectors > 0 && (!mode || !fb)) {
599		DRM_DEBUG_KMS("Count connectors is %d but no mode or fb set\n",
600			  crtc_req->count_connectors);
601		ret = -EINVAL;
602		goto out;
603	}
604
605	if (crtc_req->count_connectors > 0) {
606		u32 out_id;
607
608		/* Avoid unbounded kernel memory allocation */
609		if (crtc_req->count_connectors > config->num_connector) {
610			ret = -EINVAL;
611			goto out;
612		}
613
614		connector_set = kmalloc_array(crtc_req->count_connectors,
615					      sizeof(struct drm_connector *),
616					      GFP_KERNEL);
617		if (!connector_set) {
618			ret = -ENOMEM;
619			goto out;
620		}
621
622		for (i = 0; i < crtc_req->count_connectors; i++) {
623			connector_set[i] = NULL;
624			set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr;
625			if (get_user(out_id, &set_connectors_ptr[i])) {
626				ret = -EFAULT;
627				goto out;
628			}
629
630			connector = drm_connector_lookup(dev, out_id);
631			if (!connector) {
632				DRM_DEBUG_KMS("Connector id %d unknown\n",
633						out_id);
634				ret = -ENOENT;
635				goto out;
636			}
637			DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
638					connector->base.id,
639					connector->name);
640
641			connector_set[i] = connector;
642		}
643	}
644
645	set.crtc = crtc;
646	set.x = crtc_req->x;
647	set.y = crtc_req->y;
648	set.mode = mode;
649	set.connectors = connector_set;
650	set.num_connectors = crtc_req->count_connectors;
651	set.fb = fb;
652	ret = drm_mode_set_config_internal(&set);
 
 
 
 
653
654out:
655	if (fb)
656		drm_framebuffer_unreference(fb);
657
658	if (connector_set) {
659		for (i = 0; i < crtc_req->count_connectors; i++) {
660			if (connector_set[i])
661				drm_connector_unreference(connector_set[i]);
662		}
663	}
664	kfree(connector_set);
665	drm_mode_destroy(dev, mode);
666	drm_modeset_unlock_all(dev);
 
 
 
 
 
 
 
 
667	return ret;
668}
669
670int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj,
671			       struct drm_property *property,
672			       uint64_t value)
673{
674	int ret = -EINVAL;
675	struct drm_crtc *crtc = obj_to_crtc(obj);
676
677	if (crtc->funcs->set_property)
678		ret = crtc->funcs->set_property(crtc, property, value);
679	if (!ret)
680		drm_object_property_set_value(obj, property, value);
681
682	return ret;
683}