1// SPDX-License-Identifier: GPL-2.0-only
 2/*
 3 * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
 4 *
 5 * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
 6 * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
 
 
 
 
 7 */
 8
 9#include "omap3-igep0030-common.dtsi"
10
11/ {
12	model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)";
13	compatible = "isee,omap3-igep0030-rev-g", "ti,omap36xx", "ti,omap3";
14
15	/* Regulator to trigger the WL_EN signal of the Wifi module */
16	lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
17		compatible = "regulator-fixed";
18		regulator-name = "regulator-lbep5clwmc-wlen";
19		regulator-min-microvolt = <3300000>;
20		regulator-max-microvolt = <3300000>;
21		gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;		/* gpio_139 - WL_EN */
22		enable-active-high;
23	};
24};
25
26&omap3_pmx_core {
27	lbep5clwmc_pins: pinmux_lbep5clwmc_pins {
28		pinctrl-single,pins = <
29			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)	/* sdmmc2_dat4.gpio_136 - W_IRQ */
30			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - BT_EN */
31			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - WL_EN */
32		>;
33	};
34
35	leds_pins: pinmux_leds_pins {
36		pinctrl-single,pins = <
37			OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4)	/* i2c2_scl.gpio_168 */
38		>;
39	};
40
41};
42
43&i2c2 {
44	status = "disabled";
45};
46
47&leds {
48	pinctrl-names = "default";
49	pinctrl-0 = <&leds_pins &leds_core2_pins>;
50
51	boot {
52		label = "omap3:green:boot";
53		gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
54		default-state = "on";
55	};
56};
57
58&mmc2 {
59	pinctrl-names = "default";
60	pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
61	vmmc-supply = <&lbep5clwmc_wlen>;
62	bus-width = <4>;
63	non-removable;
64
65	#address-cells = <1>;
66	#size-cells = <0>;
67	wlcore: wlcore@2 {
68		compatible = "ti,wl1835";
69		reg = <2>;
70		interrupt-parent = <&gpio5>;
71		interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
72	};
73};

 
 1/*
 2 * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
 3 *
 4 * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
 5 * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
 6 *
 7 * This program is free software; you can redistribute it and/or modify
 8 * it under the terms of the GNU General Public License version 2 as
 9 * published by the Free Software Foundation.
10 */
11
12#include "omap3-igep0030-common.dtsi"
13
14/ {
15	model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)";
16	compatible = "isee,omap3-igep0030-rev-g", "ti,omap36xx", "ti,omap3";
17
18	/* Regulator to trigger the WL_EN signal of the Wifi module */
19	lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
20		compatible = "regulator-fixed";
21		regulator-name = "regulator-lbep5clwmc-wlen";
22		regulator-min-microvolt = <3300000>;
23		regulator-max-microvolt = <3300000>;
24		gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;		/* gpio_139 - WL_EN */
25		enable-active-high;
26	};
27};
28
29&omap3_pmx_core {
30	lbep5clwmc_pins: pinmux_lbep5clwmc_pins {
31		pinctrl-single,pins = <
32			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)	/* sdmmc2_dat4.gpio_136 - W_IRQ */
33			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - BT_EN */
34			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - WL_EN */
35		>;
36	};
37
38	leds_pins: pinmux_leds_pins {
39		pinctrl-single,pins = <
40			OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4)	/* i2c2_scl.gpio_168 */
41		>;
42	};
43
44};
45
46&i2c2 {
47	status = "disabled";
48};
49
50&leds {
51	pinctrl-names = "default";
52	pinctrl-0 = <&leds_pins &leds_core2_pins>;
53
54	boot {
55		label = "omap3:green:boot";
56		gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
57		default-state = "on";
58	};
59};
60
61&mmc2 {
62	pinctrl-names = "default";
63	pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
64	vmmc-supply = <&lbep5clwmc_wlen>;
65	bus-width = <4>;
66	non-removable;
67
68	#address-cells = <1>;
69	#size-cells = <0>;
70	wlcore: wlcore@2 {
71		compatible = "ti,wl1835";
72		reg = <2>;
73		interrupt-parent = <&gpio5>;
74		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */
75	};
76};