Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/* Device tree file for the Zyxel NSA 320 NAS box.
3 *
4 * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
5 *
6 *
7 * Based upon the board setup file created by Peter Schildmann */
8
9/dts-v1/;
10
11#include "kirkwood-nsa3x0-common.dtsi"
12
13/ {
14 model = "Zyxel NSA320";
15 compatible = "zyxel,nsa320", "marvell,kirkwood-88f6281", "marvell,kirkwood";
16
17 memory {
18 device_type = "memory";
19 reg = <0x00000000 0x20000000>;
20 };
21
22 chosen {
23 bootargs = "console=ttyS0,115200";
24 stdout-path = &uart0;
25 };
26
27 ocp@f1000000 {
28 pinctrl: pin-controller@10000 {
29 pinctrl-names = "default";
30
31 /* SATA Activity and Present pins are not connected */
32 pmx_sata0: pmx-sata0 {
33 marvell,pins ;
34 marvell,function = "sata0";
35 };
36
37 pmx_sata1: pmx-sata1 {
38 marvell,pins ;
39 marvell,function = "sata1";
40 };
41
42 pmx_led_hdd2_green: pmx-led-hdd2-green {
43 marvell,pins = "mpp12";
44 marvell,function = "gpio";
45 };
46
47 pmx_led_hdd2_red: pmx-led-hdd2-red {
48 marvell,pins = "mpp13";
49 marvell,function = "gpio";
50 };
51
52 pmx_mcu_data: pmx-mcu-data {
53 marvell,pins = "mpp14";
54 marvell,function = "gpio";
55 };
56
57 pmx_led_usb_green: pmx-led-usb-green {
58 marvell,pins = "mpp15";
59 marvell,function = "gpio";
60 };
61
62 pmx_mcu_clk: pmx-mcu-clk {
63 marvell,pins = "mpp16";
64 marvell,function = "gpio";
65 };
66
67 pmx_mcu_act: pmx-mcu-act {
68 marvell,pins = "mpp17";
69 marvell,function = "gpio";
70 };
71
72 pmx_led_sys_green: pmx-led-sys-green {
73 marvell,pins = "mpp28";
74 marvell,function = "gpio";
75 };
76
77 pmx_led_sys_orange: pmx-led-sys-orange {
78 marvell,pins = "mpp29";
79 marvell,function = "gpio";
80 };
81
82 pmx_led_hdd1_green: pmx-led-hdd1-green {
83 marvell,pins = "mpp41";
84 marvell,function = "gpio";
85 };
86
87 pmx_led_hdd1_red: pmx-led-hdd1-red {
88 marvell,pins = "mpp42";
89 marvell,function = "gpio";
90 };
91
92 pmx_htp: pmx-htp {
93 marvell,pins = "mpp43";
94 marvell,function = "gpio";
95 };
96
97 /* Buzzer needs to be switched at around 1kHz so is
98 not compatible with the gpio-beeper driver. */
99 pmx_buzzer: pmx-buzzer {
100 marvell,pins = "mpp44";
101 marvell,function = "gpio";
102 };
103
104 pmx_vid_b1: pmx-vid-b1 {
105 marvell,pins = "mpp45";
106 marvell,function = "gpio";
107 };
108
109 pmx_power_resume_data: pmx-power-resume-data {
110 marvell,pins = "mpp47";
111 marvell,function = "gpio";
112 };
113
114 pmx_power_resume_clk: pmx-power-resume-clk {
115 marvell,pins = "mpp49";
116 marvell,function = "gpio";
117 };
118 };
119
120 i2c@11000 {
121 status = "okay";
122
123 pcf8563: pcf8563@51 {
124 compatible = "nxp,pcf8563";
125 reg = <0x51>;
126 };
127 };
128 };
129
130 regulators {
131 usb0_power: regulator@1 {
132 enable-active-high;
133 };
134 };
135
136 gpio-leds {
137 compatible = "gpio-leds";
138 pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
139 &pmx_led_usb_green
140 &pmx_led_sys_green &pmx_led_sys_orange
141 &pmx_led_copy_green &pmx_led_copy_red
142 &pmx_led_hdd1_green &pmx_led_hdd1_red>;
143 pinctrl-names = "default";
144
145 green-sys {
146 label = "nsa320:green:sys";
147 gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
148 };
149 orange-sys {
150 label = "nsa320:orange:sys";
151 gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
152 };
153 green-hdd1 {
154 label = "nsa320:green:hdd1";
155 gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
156 };
157 red-hdd1 {
158 label = "nsa320:red:hdd1";
159 gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
160 };
161 green-hdd2 {
162 label = "nsa320:green:hdd2";
163 gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
164 };
165 red-hdd2 {
166 label = "nsa320:red:hdd2";
167 gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
168 };
169 green-usb {
170 label = "nsa320:green:usb";
171 gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
172 };
173 green-copy {
174 label = "nsa320:green:copy";
175 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
176 };
177 red-copy {
178 label = "nsa320:red:copy";
179 gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
180 };
181 };
182
183 hwmon {
184 compatible = "zyxel,nsa320-mcu";
185 pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>;
186 pinctrl-names = "default";
187
188 data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
189 clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
190 act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
191 };
192
193 /* The following pins are currently not assigned to a driver,
194 some of them should be configured as inputs.
195 pinctrl-0 = <&pmx_htp &pmx_vid_b1
196 &pmx_power_resume_data &pmx_power_resume_clk>; */
197};
198
199&mdio {
200 status = "okay";
201 ethphy0: ethernet-phy@1 {
202 reg = <1>;
203 };
204};
205
206ð0 {
207 status = "okay";
208 ethernet0-port@0 {
209 phy-handle = <ðphy0>;
210 };
211};
212
213&pciec {
214 status = "okay";
215};
216
217&pcie0 {
218 status = "okay";
219};
1/* Device tree file for the Zyxel NSA 320 NAS box.
2 *
3 * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
4 *
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version
8 * 2 of the License, or (at your option) any later version.
9 *
10 * Based upon the board setup file created by Peter Schildmann */
11
12/dts-v1/;
13
14#include "kirkwood-nsa3x0-common.dtsi"
15
16/ {
17 model = "Zyxel NSA320";
18 compatible = "zyxel,nsa320", "marvell,kirkwood-88f6281", "marvell,kirkwood";
19
20 memory {
21 device_type = "memory";
22 reg = <0x00000000 0x20000000>;
23 };
24
25 chosen {
26 bootargs = "console=ttyS0,115200";
27 stdout-path = &uart0;
28 };
29
30 ocp@f1000000 {
31 pinctrl: pin-controller@10000 {
32 pinctrl-names = "default";
33
34 /* SATA Activity and Present pins are not connected */
35 pmx_sata0: pmx-sata0 {
36 marvell,pins ;
37 marvell,function = "sata0";
38 };
39
40 pmx_sata1: pmx-sata1 {
41 marvell,pins ;
42 marvell,function = "sata1";
43 };
44
45 pmx_led_hdd2_green: pmx-led-hdd2-green {
46 marvell,pins = "mpp12";
47 marvell,function = "gpio";
48 };
49
50 pmx_led_hdd2_red: pmx-led-hdd2-red {
51 marvell,pins = "mpp13";
52 marvell,function = "gpio";
53 };
54
55 pmx_mcu_data: pmx-mcu-data {
56 marvell,pins = "mpp14";
57 marvell,function = "gpio";
58 };
59
60 pmx_led_usb_green: pmx-led-usb-green {
61 marvell,pins = "mpp15";
62 marvell,function = "gpio";
63 };
64
65 pmx_mcu_clk: pmx-mcu-clk {
66 marvell,pins = "mpp16";
67 marvell,function = "gpio";
68 };
69
70 pmx_mcu_act: pmx-mcu-act {
71 marvell,pins = "mpp17";
72 marvell,function = "gpio";
73 };
74
75 pmx_led_sys_green: pmx-led-sys-green {
76 marvell,pins = "mpp28";
77 marvell,function = "gpio";
78 };
79
80 pmx_led_sys_orange: pmx-led-sys-orange {
81 marvell,pins = "mpp29";
82 marvell,function = "gpio";
83 };
84
85 pmx_led_hdd1_green: pmx-led-hdd1-green {
86 marvell,pins = "mpp41";
87 marvell,function = "gpio";
88 };
89
90 pmx_led_hdd1_red: pmx-led-hdd1-red {
91 marvell,pins = "mpp42";
92 marvell,function = "gpio";
93 };
94
95 pmx_htp: pmx-htp {
96 marvell,pins = "mpp43";
97 marvell,function = "gpio";
98 };
99
100 /* Buzzer needs to be switched at around 1kHz so is
101 not compatible with the gpio-beeper driver. */
102 pmx_buzzer: pmx-buzzer {
103 marvell,pins = "mpp44";
104 marvell,function = "gpio";
105 };
106
107 pmx_vid_b1: pmx-vid-b1 {
108 marvell,pins = "mpp45";
109 marvell,function = "gpio";
110 };
111
112 pmx_power_resume_data: pmx-power-resume-data {
113 marvell,pins = "mpp47";
114 marvell,function = "gpio";
115 };
116
117 pmx_power_resume_clk: pmx-power-resume-clk {
118 marvell,pins = "mpp49";
119 marvell,function = "gpio";
120 };
121 };
122
123 i2c@11000 {
124 status = "okay";
125
126 pcf8563: pcf8563@51 {
127 compatible = "nxp,pcf8563";
128 reg = <0x51>;
129 };
130 };
131 };
132
133 regulators {
134 usb0_power: regulator@1 {
135 enable-active-high;
136 };
137 };
138
139 gpio-leds {
140 compatible = "gpio-leds";
141 pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
142 &pmx_led_usb_green
143 &pmx_led_sys_green &pmx_led_sys_orange
144 &pmx_led_copy_green &pmx_led_copy_red
145 &pmx_led_hdd1_green &pmx_led_hdd1_red>;
146 pinctrl-names = "default";
147
148 green-sys {
149 label = "nsa320:green:sys";
150 gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
151 };
152 orange-sys {
153 label = "nsa320:orange:sys";
154 gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
155 };
156 green-hdd1 {
157 label = "nsa320:green:hdd1";
158 gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
159 };
160 red-hdd1 {
161 label = "nsa320:red:hdd1";
162 gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
163 };
164 green-hdd2 {
165 label = "nsa320:green:hdd2";
166 gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
167 };
168 red-hdd2 {
169 label = "nsa320:red:hdd2";
170 gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
171 };
172 green-usb {
173 label = "nsa320:green:usb";
174 gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
175 };
176 green-copy {
177 label = "nsa320:green:copy";
178 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
179 };
180 red-copy {
181 label = "nsa320:red:copy";
182 gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
183 };
184 };
185
186 hwmon {
187 compatible = "zyxel,nsa320-mcu";
188 pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>;
189 pinctrl-names = "default";
190
191 data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
192 clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
193 act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
194 };
195
196 /* The following pins are currently not assigned to a driver,
197 some of them should be configured as inputs.
198 pinctrl-0 = <&pmx_htp &pmx_vid_b1
199 &pmx_power_resume_data &pmx_power_resume_clk>; */
200};
201
202&mdio {
203 status = "okay";
204 ethphy0: ethernet-phy@1 {
205 reg = <1>;
206 };
207};
208
209ð0 {
210 status = "okay";
211 ethernet0-port@0 {
212 phy-handle = <ðphy0>;
213 };
214};
215
216&pciec {
217 status = "okay";
218};
219
220&pcie0 {
221 status = "okay";
222};