1// SPDX-License-Identifier: GPL-2.0
  2/dts-v1/;
  3
  4#include "kirkwood.dtsi"
  5#include "kirkwood-6281.dtsi"
  6
  7/ {
  8	model = "LaCie CloudBox";
  9	compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";
 10
 11	memory {
 12		device_type = "memory";
 13		reg = <0x00000000 0x10000000>;
 14	};
 15
 16	chosen {
 17		bootargs = "console=ttyS0,115200n8";
 18		stdout-path = &uart0;
 19	};
 20
 21	ocp@f1000000 {
 22		pinctrl: pin-controller@10000 {
 23			pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
 24				marvell,pins = "mpp15";
 25				marvell,function = "sata0";
 26			};
 27		};
 28
 29		serial@12000 {
 30			status = "okay";
 31		};
 32
 33		sata@80000 {
 34			pinctrl-0 = <&pmx_cloudbox_sata0>;
 35			pinctrl-names = "default";
 36			status = "okay";
 37			nr-ports = <1>;
 38		};
 39
 40		spi@10600 {
 41			status = "okay";
 42
 43			flash@0 {
 44				#address-cells = <1>;
 45				#size-cells = <1>;
 46				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
 47				reg = <0>;
 48				spi-max-frequency = <20000000>;
 49				mode = <0>;
 50
 51				partition@0 {
 52					reg = <0x0 0x80000>;
 53					label = "u-boot";
 54				};
 55			};
 56		};
 57	};
 58
 59	gpio_keys {
 60		compatible = "gpio-keys";
 61		#address-cells = <1>;
 62		#size-cells = <0>;
 63
 64		power {
 65			label = "Power push button";
 66			linux,code = <KEY_POWER>;
 67			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
 68		};
 69	};
 70
 71	gpio-leds {
 72		compatible = "gpio-leds";
 73
 74		red-fail {
 75			label = "cloudbox:red:fail";
 76			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 77		};
 78		blue-sata {
 79			label = "cloudbox:blue:sata";
 80			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 81		};
 82	};
 83
 84	gpio_poweroff {
 85		compatible = "gpio-poweroff";
 86		gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
 87	};
 88};
 89
 90&mdio {
 91	status = "okay";
 92
 93	ethphy0: ethernet-phy@0 {
 94		reg = <0>;
 95	};
 96};
 97
 98&eth0 {
 99	status = "okay";
100	ethernet0-port@0 {
101		phy-handle = <&ethphy0>;
102	};
103};

 
  1/dts-v1/;
  2
  3#include "kirkwood.dtsi"
  4#include "kirkwood-6281.dtsi"
  5
  6/ {
  7	model = "LaCie CloudBox";
  8	compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";
  9
 10	memory {
 11		device_type = "memory";
 12		reg = <0x00000000 0x10000000>;
 13	};
 14
 15	chosen {
 16		bootargs = "console=ttyS0,115200n8";
 17		stdout-path = &uart0;
 18	};
 19
 20	ocp@f1000000 {
 21		pinctrl: pin-controller@10000 {
 22			pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
 23				marvell,pins = "mpp15";
 24				marvell,function = "sata0";
 25			};
 26		};
 27
 28		serial@12000 {
 29			status = "okay";
 30		};
 31
 32		sata@80000 {
 33			pinctrl-0 = <&pmx_cloudbox_sata0>;
 34			pinctrl-names = "default";
 35			status = "okay";
 36			nr-ports = <1>;
 37		};
 38
 39		spi@10600 {
 40			status = "okay";
 41
 42			flash@0 {
 43				#address-cells = <1>;
 44				#size-cells = <1>;
 45				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
 46				reg = <0>;
 47				spi-max-frequency = <20000000>;
 48				mode = <0>;
 49
 50				partition@0 {
 51					reg = <0x0 0x80000>;
 52					label = "u-boot";
 53				};
 54			};
 55		};
 56	};
 57
 58	gpio_keys {
 59		compatible = "gpio-keys";
 60		#address-cells = <1>;
 61		#size-cells = <0>;
 62
 63		power {
 64			label = "Power push button";
 65			linux,code = <KEY_POWER>;
 66			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
 67		};
 68	};
 69
 70	gpio-leds {
 71		compatible = "gpio-leds";
 72
 73		red-fail {
 74			label = "cloudbox:red:fail";
 75			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 76		};
 77		blue-sata {
 78			label = "cloudbox:blue:sata";
 79			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 80		};
 81	};
 82
 83	gpio_poweroff {
 84		compatible = "gpio-poweroff";
 85		gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
 86	};
 87};
 88
 89&mdio {
 90	status = "okay";
 91
 92	ethphy0: ethernet-phy@0 {
 93		reg = <0>;
 94	};
 95};
 96
 97&eth0 {
 98	status = "okay";
 99	ethernet0-port@0 {
100		phy-handle = <&ethphy0>;
101	};
102};