Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Gateworks Corporation
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/sound/fsl-imx-audmux.h>
8
9/ {
10 /* these are used by bootloader for disabling nodes */
11 aliases {
12 led0 = &led0;
13 led1 = &led1;
14 led2 = &led2;
15 nand = &gpmi;
16 ssi0 = &ssi1;
17 usb0 = &usbh1;
18 usb1 = &usbotg;
19 };
20
21 chosen {
22 bootargs = "console=ttymxc1,115200";
23 };
24
25 backlight {
26 compatible = "pwm-backlight";
27 pwms = <&pwm4 0 5000000>;
28 brightness-levels = <0 4 8 16 32 64 128 255>;
29 default-brightness-level = <7>;
30 };
31
32 leds {
33 compatible = "gpio-leds";
34 pinctrl-names = "default";
35 pinctrl-0 = <&pinctrl_gpio_leds>;
36
37 led0: user1 {
38 label = "user1";
39 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
40 default-state = "on";
41 linux,default-trigger = "heartbeat";
42 };
43
44 led1: user2 {
45 label = "user2";
46 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
47 default-state = "off";
48 };
49
50 led2: user3 {
51 label = "user3";
52 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
53 default-state = "off";
54 };
55 };
56
57 memory@10000000 {
58 device_type = "memory";
59 reg = <0x10000000 0x40000000>;
60 };
61
62 pps {
63 compatible = "pps-gpio";
64 pinctrl-names = "default";
65 pinctrl-0 = <&pinctrl_pps>;
66 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
67 status = "okay";
68 };
69
70 regulators {
71 compatible = "simple-bus";
72 #address-cells = <1>;
73 #size-cells = <0>;
74
75 reg_1p0v: regulator@0 {
76 compatible = "regulator-fixed";
77 reg = <0>;
78 regulator-name = "1P0V";
79 regulator-min-microvolt = <1000000>;
80 regulator-max-microvolt = <1000000>;
81 regulator-always-on;
82 };
83
84 reg_3p3v: regulator@1 {
85 compatible = "regulator-fixed";
86 reg = <1>;
87 regulator-name = "3P3V";
88 regulator-min-microvolt = <3300000>;
89 regulator-max-microvolt = <3300000>;
90 regulator-always-on;
91 };
92
93 reg_usb_h1_vbus: regulator@2 {
94 compatible = "regulator-fixed";
95 reg = <2>;
96 regulator-name = "usb_h1_vbus";
97 regulator-min-microvolt = <5000000>;
98 regulator-max-microvolt = <5000000>;
99 regulator-always-on;
100 };
101
102 reg_usb_otg_vbus: regulator@3 {
103 compatible = "regulator-fixed";
104 reg = <3>;
105 regulator-name = "usb_otg_vbus";
106 regulator-min-microvolt = <5000000>;
107 regulator-max-microvolt = <5000000>;
108 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
109 enable-active-high;
110 };
111 };
112
113 sound-analog {
114 compatible = "fsl,imx6q-ventana-sgtl5000",
115 "fsl,imx-audio-sgtl5000";
116 model = "sgtl5000-audio";
117 ssi-controller = <&ssi1>;
118 audio-codec = <&sgtl5000>;
119 audio-routing =
120 "MIC_IN", "Mic Jack",
121 "Mic Jack", "Mic Bias",
122 "Headphone Jack", "HP_OUT";
123 mux-int-port = <1>;
124 mux-ext-port = <4>;
125 };
126};
127
128&audmux {
129 pinctrl-names = "default";
130 pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
131 status = "okay";
132
133 ssi2 {
134 fsl,audmux-port = <1>;
135 fsl,port-config = <
136 (IMX_AUDMUX_V2_PTCR_TFSDIR |
137 IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
138 IMX_AUDMUX_V2_PTCR_TCLKDIR |
139 IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
140 IMX_AUDMUX_V2_PTCR_SYN)
141 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
142 >;
143 };
144
145 aud5 {
146 fsl,audmux-port = <4>;
147 fsl,port-config = <
148 IMX_AUDMUX_V2_PTCR_SYN
149 IMX_AUDMUX_V2_PDCR_RXDSEL(1)>;
150 };
151};
152
153&can1 {
154 pinctrl-names = "default";
155 pinctrl-0 = <&pinctrl_flexcan1>;
156 status = "okay";
157};
158
159&clks {
160 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
161 <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
162 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
163 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
164};
165
166&ecspi2 {
167 cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
168 pinctrl-names = "default";
169 pinctrl-0 = <&pinctrl_ecspi2>;
170 status = "okay";
171};
172
173&fec {
174 pinctrl-names = "default";
175 pinctrl-0 = <&pinctrl_enet>;
176 phy-mode = "rgmii-id";
177 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
178 status = "okay";
179};
180
181&gpmi {
182 pinctrl-names = "default";
183 pinctrl-0 = <&pinctrl_gpmi_nand>;
184 status = "okay";
185};
186
187&hdmi {
188 ddc-i2c-bus = <&i2c3>;
189 status = "okay";
190};
191
192&i2c1 {
193 clock-frequency = <100000>;
194 pinctrl-names = "default";
195 pinctrl-0 = <&pinctrl_i2c1>;
196 status = "okay";
197
198 eeprom1: eeprom@50 {
199 compatible = "atmel,24c02";
200 reg = <0x50>;
201 pagesize = <16>;
202 };
203
204 eeprom2: eeprom@51 {
205 compatible = "atmel,24c02";
206 reg = <0x51>;
207 pagesize = <16>;
208 };
209
210 eeprom3: eeprom@52 {
211 compatible = "atmel,24c02";
212 reg = <0x52>;
213 pagesize = <16>;
214 };
215
216 eeprom4: eeprom@53 {
217 compatible = "atmel,24c02";
218 reg = <0x53>;
219 pagesize = <16>;
220 };
221
222 gpio: pca9555@23 {
223 compatible = "nxp,pca9555";
224 reg = <0x23>;
225 gpio-controller;
226 #gpio-cells = <2>;
227 };
228
229 rtc: ds1672@68 {
230 compatible = "dallas,ds1672";
231 reg = <0x68>;
232 };
233};
234
235&i2c2 {
236 clock-frequency = <100000>;
237 pinctrl-names = "default";
238 pinctrl-0 = <&pinctrl_i2c2>;
239 status = "okay";
240
241 pmic: pfuze100@8 {
242 compatible = "fsl,pfuze100";
243 reg = <0x08>;
244
245 regulators {
246 sw1a_reg: sw1ab {
247 regulator-min-microvolt = <300000>;
248 regulator-max-microvolt = <1875000>;
249 regulator-boot-on;
250 regulator-always-on;
251 regulator-ramp-delay = <6250>;
252 };
253
254 sw1c_reg: sw1c {
255 regulator-min-microvolt = <300000>;
256 regulator-max-microvolt = <1875000>;
257 regulator-boot-on;
258 regulator-always-on;
259 regulator-ramp-delay = <6250>;
260 };
261
262 sw2_reg: sw2 {
263 regulator-min-microvolt = <800000>;
264 regulator-max-microvolt = <3950000>;
265 regulator-boot-on;
266 regulator-always-on;
267 };
268
269 sw3a_reg: sw3a {
270 regulator-min-microvolt = <400000>;
271 regulator-max-microvolt = <1975000>;
272 regulator-boot-on;
273 regulator-always-on;
274 };
275
276 sw3b_reg: sw3b {
277 regulator-min-microvolt = <400000>;
278 regulator-max-microvolt = <1975000>;
279 regulator-boot-on;
280 regulator-always-on;
281 };
282
283 sw4_reg: sw4 {
284 regulator-min-microvolt = <800000>;
285 regulator-max-microvolt = <3300000>;
286 };
287
288 swbst_reg: swbst {
289 regulator-min-microvolt = <5000000>;
290 regulator-max-microvolt = <5150000>;
291 regulator-boot-on;
292 regulator-always-on;
293 };
294
295 snvs_reg: vsnvs {
296 regulator-min-microvolt = <1000000>;
297 regulator-max-microvolt = <3000000>;
298 regulator-boot-on;
299 regulator-always-on;
300 };
301
302 vref_reg: vrefddr {
303 regulator-boot-on;
304 regulator-always-on;
305 };
306
307 vgen1_reg: vgen1 {
308 regulator-min-microvolt = <800000>;
309 regulator-max-microvolt = <1550000>;
310 };
311
312 vgen2_reg: vgen2 {
313 regulator-min-microvolt = <800000>;
314 regulator-max-microvolt = <1550000>;
315 };
316
317 vgen3_reg: vgen3 {
318 regulator-min-microvolt = <1800000>;
319 regulator-max-microvolt = <3300000>;
320 };
321
322 vgen4_reg: vgen4 {
323 regulator-min-microvolt = <1800000>;
324 regulator-max-microvolt = <3300000>;
325 regulator-always-on;
326 };
327
328 vgen5_reg: vgen5 {
329 regulator-min-microvolt = <1800000>;
330 regulator-max-microvolt = <3300000>;
331 regulator-always-on;
332 };
333
334 vgen6_reg: vgen6 {
335 regulator-min-microvolt = <1800000>;
336 regulator-max-microvolt = <3300000>;
337 regulator-always-on;
338 };
339 };
340 };
341};
342
343&i2c3 {
344 clock-frequency = <100000>;
345 pinctrl-names = "default";
346 pinctrl-0 = <&pinctrl_i2c3>;
347 status = "okay";
348
349 sgtl5000: audio-codec@a {
350 compatible = "fsl,sgtl5000";
351 reg = <0x0a>;
352 clocks = <&clks IMX6QDL_CLK_CKO>;
353 VDDA-supply = <&sw4_reg>;
354 VDDIO-supply = <®_3p3v>;
355 };
356
357 touchscreen: egalax_ts@4 {
358 compatible = "eeti,egalax_ts";
359 reg = <0x04>;
360 interrupt-parent = <&gpio7>;
361 interrupts = <12 2>;
362 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
363 };
364};
365
366&ldb {
367 status = "okay";
368
369 lvds-channel@0 {
370 fsl,data-mapping = "spwg";
371 fsl,data-width = <18>;
372 status = "okay";
373
374 display-timings {
375 native-mode = <&timing0>;
376 timing0: hsd100pxn1 {
377 clock-frequency = <65000000>;
378 hactive = <1024>;
379 vactive = <768>;
380 hback-porch = <220>;
381 hfront-porch = <40>;
382 vback-porch = <21>;
383 vfront-porch = <7>;
384 hsync-len = <60>;
385 vsync-len = <10>;
386 };
387 };
388 };
389};
390
391&pcie {
392 pinctrl-names = "default";
393 pinctrl-0 = <&pinctrl_pcie>;
394 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
395 status = "okay";
396};
397
398&pwm1 {
399 pinctrl-names = "default";
400 pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
401 status = "disabled";
402};
403
404&pwm2 {
405 pinctrl-names = "default";
406 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
407 status = "disabled";
408};
409
410&pwm3 {
411 pinctrl-names = "default";
412 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
413 status = "disabled";
414};
415
416&pwm4 {
417 pinctrl-names = "default", "state_dio";
418 pinctrl-0 = <&pinctrl_pwm4_backlight>;
419 pinctrl-1 = <&pinctrl_pwm4_dio>;
420 status = "okay";
421};
422
423&ssi1 {
424 status = "okay";
425};
426
427&ssi2 {
428 status = "okay";
429};
430
431&uart1 {
432 pinctrl-names = "default";
433 pinctrl-0 = <&pinctrl_uart1>;
434 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
435 status = "okay";
436};
437
438&uart2 {
439 pinctrl-names = "default";
440 pinctrl-0 = <&pinctrl_uart2>;
441 status = "okay";
442};
443
444&uart5 {
445 pinctrl-names = "default";
446 pinctrl-0 = <&pinctrl_uart5>;
447 status = "okay";
448};
449
450&usbotg {
451 vbus-supply = <®_usb_otg_vbus>;
452 pinctrl-names = "default";
453 pinctrl-0 = <&pinctrl_usbotg>;
454 disable-over-current;
455 status = "okay";
456};
457
458&usbh1 {
459 vbus-supply = <®_usb_h1_vbus>;
460 status = "okay";
461};
462
463&usdhc3 {
464 pinctrl-names = "default", "state_100mhz", "state_200mhz";
465 pinctrl-0 = <&pinctrl_usdhc3>;
466 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
467 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
468 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
469 vmmc-supply = <®_3p3v>;
470 no-1-8-v; /* firmware will remove if board revision supports */
471 status = "okay";
472};
473
474&wdog1 {
475 status = "disabled";
476};
477
478&wdog2 {
479 pinctrl-names = "default";
480 pinctrl-0 = <&pinctrl_wdog>;
481 fsl,ext-reset-output;
482 status = "okay";
483};
484
485&iomuxc {
486 pinctrl_audmux: audmuxgrp {
487 fsl,pins = <
488 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
489 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
490 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
491 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
492 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
493 MX6QDL_PAD_EIM_D25__AUD5_RXC 0x130b0
494 MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
495 MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x130b0
496 >;
497 };
498
499 pinctrl_enet: enetgrp {
500 fsl,pins = <
501 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
502 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
503 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
504 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
505 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
506 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
507 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
508 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
509 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
510 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
511 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
512 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
513 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
514 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
515 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
516 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
517 >;
518 };
519
520 pinctrl_ecspi2: escpi2grp {
521 fsl,pins = <
522 MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
523 MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
524 MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
525 MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1
526 >;
527 };
528
529 pinctrl_flexcan1: flexcan1grp {
530 fsl,pins = <
531 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
532 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
533 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
534 >;
535 };
536
537 pinctrl_gpio_leds: gpioledsgrp {
538 fsl,pins = <
539 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
540 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
541 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
542 >;
543 };
544
545 pinctrl_gpmi_nand: gpminandgrp {
546 fsl,pins = <
547 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
548 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
549 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
550 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
551 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
552 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
553 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
554 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
555 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
556 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
557 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
558 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
559 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
560 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
561 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
562 >;
563 };
564
565 pinctrl_i2c1: i2c1grp {
566 fsl,pins = <
567 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
568 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
569 >;
570 };
571
572 pinctrl_i2c2: i2c2grp {
573 fsl,pins = <
574 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
575 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
576 >;
577 };
578
579 pinctrl_i2c3: i2c3grp {
580 fsl,pins = <
581 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
582 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
583 >;
584 };
585
586 pinctrl_pcie: pciegrp {
587 fsl,pins = <
588 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
589 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
590 >;
591 };
592
593 pinctrl_pps: ppsgrp {
594 fsl,pins = <
595 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
596 >;
597 };
598
599 pinctrl_pwm1: pwm1grp {
600 fsl,pins = <
601 MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
602 >;
603 };
604
605 pinctrl_pwm2: pwm2grp {
606 fsl,pins = <
607 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
608 >;
609 };
610
611 pinctrl_pwm3: pwm3grp {
612 fsl,pins = <
613 MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
614 >;
615 };
616
617 pinctrl_pwm4_backlight: pwm4grpbacklight {
618 fsl,pins = <
619 /* LVDS_PWM J6.5 */
620 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
621 >;
622 };
623
624 pinctrl_pwm4_dio: pwm4grpdio {
625 fsl,pins = <
626 /* DIO3 J16.4 */
627 MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
628 >;
629 };
630
631 pinctrl_uart1: uart1grp {
632 fsl,pins = <
633 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
634 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
635 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
636 >;
637 };
638
639 pinctrl_uart2: uart2grp {
640 fsl,pins = <
641 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
642 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
643 >;
644 };
645
646 pinctrl_uart5: uart5grp {
647 fsl,pins = <
648 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
649 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
650 >;
651 };
652
653 pinctrl_usbotg: usbotggrp {
654 fsl,pins = <
655 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
656 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
657 >;
658 };
659
660 pinctrl_usdhc3: usdhc3grp {
661 fsl,pins = <
662 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
663 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
664 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
665 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
666 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
667 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
668 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
669 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
670 >;
671 };
672
673 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
674 fsl,pins = <
675 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
676 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
677 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
678 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
679 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
680 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
681 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
682 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
683 >;
684 };
685
686 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
687 fsl,pins = <
688 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
689 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
690 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
691 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
692 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
693 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
694 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
695 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
696 >;
697 };
698
699 pinctrl_wdog: wdoggrp {
700 fsl,pins = <
701 MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x1b0b0
702 >;
703 };
704};
1/*
2 * Copyright 2013 Gateworks Corporation
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12#include <dt-bindings/gpio/gpio.h>
13
14/ {
15 /* these are used by bootloader for disabling nodes */
16 aliases {
17 ethernet1 = ð1;
18 led0 = &led0;
19 led1 = &led1;
20 led2 = &led2;
21 nand = &gpmi;
22 ssi0 = &ssi1;
23 usb0 = &usbh1;
24 usb1 = &usbotg;
25 };
26
27 chosen {
28 bootargs = "console=ttymxc1,115200";
29 };
30
31 backlight {
32 compatible = "pwm-backlight";
33 pwms = <&pwm4 0 5000000>;
34 brightness-levels = <0 4 8 16 32 64 128 255>;
35 default-brightness-level = <7>;
36 };
37
38 leds {
39 compatible = "gpio-leds";
40 pinctrl-names = "default";
41 pinctrl-0 = <&pinctrl_gpio_leds>;
42
43 led0: user1 {
44 label = "user1";
45 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
46 default-state = "on";
47 linux,default-trigger = "heartbeat";
48 };
49
50 led1: user2 {
51 label = "user2";
52 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
53 default-state = "off";
54 };
55
56 led2: user3 {
57 label = "user3";
58 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
59 default-state = "off";
60 };
61 };
62
63 memory {
64 reg = <0x10000000 0x40000000>;
65 };
66
67 pps {
68 compatible = "pps-gpio";
69 pinctrl-names = "default";
70 pinctrl-0 = <&pinctrl_pps>;
71 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
72 status = "okay";
73 };
74
75 regulators {
76 compatible = "simple-bus";
77 #address-cells = <1>;
78 #size-cells = <0>;
79
80 reg_1p0v: regulator@0 {
81 compatible = "regulator-fixed";
82 reg = <0>;
83 regulator-name = "1P0V";
84 regulator-min-microvolt = <1000000>;
85 regulator-max-microvolt = <1000000>;
86 regulator-always-on;
87 };
88
89 reg_3p3v: regulator@1 {
90 compatible = "regulator-fixed";
91 reg = <1>;
92 regulator-name = "3P3V";
93 regulator-min-microvolt = <3300000>;
94 regulator-max-microvolt = <3300000>;
95 regulator-always-on;
96 };
97
98 reg_usb_h1_vbus: regulator@2 {
99 compatible = "regulator-fixed";
100 reg = <2>;
101 regulator-name = "usb_h1_vbus";
102 regulator-min-microvolt = <5000000>;
103 regulator-max-microvolt = <5000000>;
104 regulator-always-on;
105 };
106
107 reg_usb_otg_vbus: regulator@3 {
108 compatible = "regulator-fixed";
109 reg = <3>;
110 regulator-name = "usb_otg_vbus";
111 regulator-min-microvolt = <5000000>;
112 regulator-max-microvolt = <5000000>;
113 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
114 enable-active-high;
115 };
116 };
117
118 sound {
119 compatible = "fsl,imx6q-ventana-sgtl5000",
120 "fsl,imx-audio-sgtl5000";
121 model = "sgtl5000-audio";
122 ssi-controller = <&ssi1>;
123 audio-codec = <&codec>;
124 audio-routing =
125 "MIC_IN", "Mic Jack",
126 "Mic Jack", "Mic Bias",
127 "Headphone Jack", "HP_OUT";
128 mux-int-port = <1>;
129 mux-ext-port = <4>;
130 };
131};
132
133&audmux {
134 pinctrl-names = "default";
135 pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
136 status = "okay";
137};
138
139&can1 {
140 pinctrl-names = "default";
141 pinctrl-0 = <&pinctrl_flexcan1>;
142 status = "okay";
143};
144
145&clks {
146 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
147 <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
148 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
149 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
150};
151
152&fec {
153 pinctrl-names = "default";
154 pinctrl-0 = <&pinctrl_enet>;
155 phy-mode = "rgmii-id";
156 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
157 status = "okay";
158};
159
160&gpmi {
161 pinctrl-names = "default";
162 pinctrl-0 = <&pinctrl_gpmi_nand>;
163 status = "okay";
164};
165
166&hdmi {
167 ddc-i2c-bus = <&i2c3>;
168 status = "okay";
169};
170
171&i2c1 {
172 clock-frequency = <100000>;
173 pinctrl-names = "default";
174 pinctrl-0 = <&pinctrl_i2c1>;
175 status = "okay";
176
177 eeprom1: eeprom@50 {
178 compatible = "atmel,24c02";
179 reg = <0x50>;
180 pagesize = <16>;
181 };
182
183 eeprom2: eeprom@51 {
184 compatible = "atmel,24c02";
185 reg = <0x51>;
186 pagesize = <16>;
187 };
188
189 eeprom3: eeprom@52 {
190 compatible = "atmel,24c02";
191 reg = <0x52>;
192 pagesize = <16>;
193 };
194
195 eeprom4: eeprom@53 {
196 compatible = "atmel,24c02";
197 reg = <0x53>;
198 pagesize = <16>;
199 };
200
201 gpio: pca9555@23 {
202 compatible = "nxp,pca9555";
203 reg = <0x23>;
204 gpio-controller;
205 #gpio-cells = <2>;
206 };
207
208 rtc: ds1672@68 {
209 compatible = "dallas,ds1672";
210 reg = <0x68>;
211 };
212};
213
214&i2c2 {
215 clock-frequency = <100000>;
216 pinctrl-names = "default";
217 pinctrl-0 = <&pinctrl_i2c2>;
218 status = "okay";
219
220 pmic: pfuze100@08 {
221 compatible = "fsl,pfuze100";
222 reg = <0x08>;
223
224 regulators {
225 sw1a_reg: sw1ab {
226 regulator-min-microvolt = <300000>;
227 regulator-max-microvolt = <1875000>;
228 regulator-boot-on;
229 regulator-always-on;
230 regulator-ramp-delay = <6250>;
231 };
232
233 sw1c_reg: sw1c {
234 regulator-min-microvolt = <300000>;
235 regulator-max-microvolt = <1875000>;
236 regulator-boot-on;
237 regulator-always-on;
238 regulator-ramp-delay = <6250>;
239 };
240
241 sw2_reg: sw2 {
242 regulator-min-microvolt = <800000>;
243 regulator-max-microvolt = <3950000>;
244 regulator-boot-on;
245 regulator-always-on;
246 };
247
248 sw3a_reg: sw3a {
249 regulator-min-microvolt = <400000>;
250 regulator-max-microvolt = <1975000>;
251 regulator-boot-on;
252 regulator-always-on;
253 };
254
255 sw3b_reg: sw3b {
256 regulator-min-microvolt = <400000>;
257 regulator-max-microvolt = <1975000>;
258 regulator-boot-on;
259 regulator-always-on;
260 };
261
262 sw4_reg: sw4 {
263 regulator-min-microvolt = <800000>;
264 regulator-max-microvolt = <3300000>;
265 };
266
267 swbst_reg: swbst {
268 regulator-min-microvolt = <5000000>;
269 regulator-max-microvolt = <5150000>;
270 regulator-boot-on;
271 regulator-always-on;
272 };
273
274 snvs_reg: vsnvs {
275 regulator-min-microvolt = <1000000>;
276 regulator-max-microvolt = <3000000>;
277 regulator-boot-on;
278 regulator-always-on;
279 };
280
281 vref_reg: vrefddr {
282 regulator-boot-on;
283 regulator-always-on;
284 };
285
286 vgen1_reg: vgen1 {
287 regulator-min-microvolt = <800000>;
288 regulator-max-microvolt = <1550000>;
289 };
290
291 vgen2_reg: vgen2 {
292 regulator-min-microvolt = <800000>;
293 regulator-max-microvolt = <1550000>;
294 };
295
296 vgen3_reg: vgen3 {
297 regulator-min-microvolt = <1800000>;
298 regulator-max-microvolt = <3300000>;
299 };
300
301 vgen4_reg: vgen4 {
302 regulator-min-microvolt = <1800000>;
303 regulator-max-microvolt = <3300000>;
304 regulator-always-on;
305 };
306
307 vgen5_reg: vgen5 {
308 regulator-min-microvolt = <1800000>;
309 regulator-max-microvolt = <3300000>;
310 regulator-always-on;
311 };
312
313 vgen6_reg: vgen6 {
314 regulator-min-microvolt = <1800000>;
315 regulator-max-microvolt = <3300000>;
316 regulator-always-on;
317 };
318 };
319 };
320};
321
322&i2c3 {
323 clock-frequency = <100000>;
324 pinctrl-names = "default";
325 pinctrl-0 = <&pinctrl_i2c3>;
326 status = "okay";
327
328 codec: sgtl5000@0a {
329 compatible = "fsl,sgtl5000";
330 reg = <0x0a>;
331 clocks = <&clks IMX6QDL_CLK_CKO>;
332 VDDA-supply = <&sw4_reg>;
333 VDDIO-supply = <®_3p3v>;
334 };
335
336 touchscreen: egalax_ts@04 {
337 compatible = "eeti,egalax_ts";
338 reg = <0x04>;
339 interrupt-parent = <&gpio7>;
340 interrupts = <12 2>;
341 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
342 };
343};
344
345&ldb {
346 status = "okay";
347
348 lvds-channel@0 {
349 fsl,data-mapping = "spwg";
350 fsl,data-width = <18>;
351 status = "okay";
352
353 display-timings {
354 native-mode = <&timing0>;
355 timing0: hsd100pxn1 {
356 clock-frequency = <65000000>;
357 hactive = <1024>;
358 vactive = <768>;
359 hback-porch = <220>;
360 hfront-porch = <40>;
361 vback-porch = <21>;
362 vfront-porch = <7>;
363 hsync-len = <60>;
364 vsync-len = <10>;
365 };
366 };
367 };
368};
369
370&pcie {
371 pinctrl-names = "default";
372 pinctrl-0 = <&pinctrl_pcie>;
373 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
374 status = "okay";
375
376 eth1: sky2@8 { /* MAC/PHY on bus 8 */
377 compatible = "marvell,sky2";
378 };
379};
380
381&pwm1 {
382 pinctrl-names = "default";
383 pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
384 status = "disabled";
385};
386
387&pwm2 {
388 pinctrl-names = "default";
389 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
390 status = "disabled";
391};
392
393&pwm3 {
394 pinctrl-names = "default";
395 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
396 status = "disabled";
397};
398
399&pwm4 {
400 pinctrl-names = "default", "state_dio";
401 pinctrl-0 = <&pinctrl_pwm4_backlight>;
402 pinctrl-1 = <&pinctrl_pwm4_dio>;
403 status = "okay";
404};
405
406&ssi1 {
407 status = "okay";
408};
409
410&ssi2 {
411 status = "okay";
412};
413
414&uart1 {
415 pinctrl-names = "default";
416 pinctrl-0 = <&pinctrl_uart1>;
417 uart-has-rtscts;
418 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
419 status = "okay";
420};
421
422&uart2 {
423 pinctrl-names = "default";
424 pinctrl-0 = <&pinctrl_uart2>;
425 status = "okay";
426};
427
428&uart5 {
429 pinctrl-names = "default";
430 pinctrl-0 = <&pinctrl_uart5>;
431 status = "okay";
432};
433
434&usbotg {
435 vbus-supply = <®_usb_otg_vbus>;
436 pinctrl-names = "default";
437 pinctrl-0 = <&pinctrl_usbotg>;
438 disable-over-current;
439 status = "okay";
440};
441
442&usbh1 {
443 vbus-supply = <®_usb_h1_vbus>;
444 status = "okay";
445};
446
447&usdhc3 {
448 pinctrl-names = "default", "state_100mhz", "state_200mhz";
449 pinctrl-0 = <&pinctrl_usdhc3>;
450 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
451 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
452 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
453 vmmc-supply = <®_3p3v>;
454 no-1-8-v; /* firmware will remove if board revision supports */
455 status = "okay";
456};
457
458&wdog1 {
459 status = "disabled";
460};
461
462&wdog2 {
463 pinctrl-names = "default";
464 pinctrl-0 = <&pinctrl_wdog>;
465 fsl,ext-reset-output;
466 status = "okay";
467};
468
469&iomuxc {
470 imx6qdl-gw54xx {
471 pinctrl_audmux: audmuxgrp {
472 fsl,pins = <
473 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
474 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
475 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
476 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
477 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
478 >;
479 };
480
481 pinctrl_enet: enetgrp {
482 fsl,pins = <
483 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
484 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
485 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
486 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
487 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
488 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
489 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
490 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
491 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
492 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
493 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
494 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
495 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
496 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
497 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
498 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
499 >;
500 };
501
502 pinctrl_flexcan1: flexcan1grp {
503 fsl,pins = <
504 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
505 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
506 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
507 >;
508 };
509
510 pinctrl_gpio_leds: gpioledsgrp {
511 fsl,pins = <
512 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
513 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
514 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
515 >;
516 };
517
518 pinctrl_gpmi_nand: gpminandgrp {
519 fsl,pins = <
520 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
521 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
522 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
523 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
524 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
525 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
526 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
527 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
528 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
529 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
530 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
531 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
532 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
533 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
534 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
535 >;
536 };
537
538 pinctrl_i2c1: i2c1grp {
539 fsl,pins = <
540 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
541 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
542 >;
543 };
544
545 pinctrl_i2c2: i2c2grp {
546 fsl,pins = <
547 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
548 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
549 >;
550 };
551
552 pinctrl_i2c3: i2c3grp {
553 fsl,pins = <
554 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
555 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
556 >;
557 };
558
559 pinctrl_pcie: pciegrp {
560 fsl,pins = <
561 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
562 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
563 >;
564 };
565
566 pinctrl_pps: ppsgrp {
567 fsl,pins = <
568 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
569 >;
570 };
571
572 pinctrl_pwm1: pwm1grp {
573 fsl,pins = <
574 MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
575 >;
576 };
577
578 pinctrl_pwm2: pwm2grp {
579 fsl,pins = <
580 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
581 >;
582 };
583
584 pinctrl_pwm3: pwm3grp {
585 fsl,pins = <
586 MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
587 >;
588 };
589
590 pinctrl_pwm4_backlight: pwm4grpbacklight {
591 fsl,pins = <
592 /* LVDS_PWM J6.5 */
593 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
594 >;
595 };
596
597 pinctrl_pwm4_dio: pwm4grpdio {
598 fsl,pins = <
599 /* DIO3 J16.4 */
600 MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
601 >;
602 };
603
604 pinctrl_uart1: uart1grp {
605 fsl,pins = <
606 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
607 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
608 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
609 >;
610 };
611
612 pinctrl_uart2: uart2grp {
613 fsl,pins = <
614 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
615 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
616 >;
617 };
618
619 pinctrl_uart5: uart5grp {
620 fsl,pins = <
621 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
622 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
623 >;
624 };
625
626 pinctrl_usbotg: usbotggrp {
627 fsl,pins = <
628 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
629 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
630 >;
631 };
632
633 pinctrl_usdhc3: usdhc3grp {
634 fsl,pins = <
635 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
636 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
637 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
638 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
639 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
640 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
641 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
642 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
643 >;
644 };
645
646 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
647 fsl,pins = <
648 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
649 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
650 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
651 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
652 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
653 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
654 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
655 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
656 >;
657 };
658
659 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
660 fsl,pins = <
661 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
662 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
663 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
664 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
665 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
666 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
667 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
668 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
669 >;
670 };
671
672 pinctrl_wdog: wdoggrp {
673 fsl,pins = <
674 MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x1b0b0
675 >;
676 };
677 };
678};