Loading...
1/*
2 * BSD LICENSE
3 *
4 * Copyright(c) 2016 Broadcom. All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 *
10 * * Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * * Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in
14 * the documentation and/or other materials provided with the
15 * distribution.
16 * * Neither the name of Broadcom Corporation nor the names of its
17 * contributors may be used to endorse or promote products derived
18 * from this software without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33/dts-v1/;
34
35#include "bcm-nsp.dtsi"
36#include <dt-bindings/gpio/gpio.h>
37
38/ {
39 model = "NorthStar Plus SVK (BCM958622HR)";
40 compatible = "brcm,bcm58622", "brcm,nsp";
41
42 chosen {
43 stdout-path = "serial0:115200n8";
44 };
45
46 memory@60000000 {
47 device_type = "memory";
48 reg = <0x60000000 0x80000000>;
49 };
50
51 gpio-restart {
52 compatible = "gpio-restart";
53 gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
54 open-source;
55 priority = <200>;
56 };
57};
58
59/* USB 3 and SLIC support needed to be complete */
60
61&amac0 {
62 status = "okay";
63};
64
65&amac1 {
66 status = "okay";
67};
68
69&amac2 {
70 status = "okay";
71};
72
73&ehci0 {
74 status = "okay";
75};
76
77&nand {
78 nandcs@0 {
79 compatible = "brcm,nandcs";
80 reg = <0>;
81 nand-on-flash-bbt;
82
83 #address-cells = <1>;
84 #size-cells = <1>;
85
86 nand-ecc-strength = <24>;
87 nand-ecc-step-size = <1024>;
88
89 brcm,nand-oob-sector-size = <27>;
90
91 partition@0 {
92 label = "nboot";
93 reg = <0x00000000 0x00200000>;
94 read-only;
95 };
96 partition@200000 {
97 label = "nenv";
98 reg = <0x00200000 0x00400000>;
99 };
100 partition@600000 {
101 label = "nsystem";
102 reg = <0x00600000 0x00a00000>;
103 };
104 partition@1000000 {
105 label = "nrootfs";
106 reg = <0x01000000 0x03000000>;
107 };
108 partition@4000000 {
109 label = "ncustfs";
110 reg = <0x04000000 0x3c000000>;
111 };
112 };
113};
114
115&ohci0 {
116 status = "okay";
117};
118
119&pcie0 {
120 status = "okay";
121};
122
123&pcie1 {
124 status = "okay";
125};
126
127&pinctrl {
128 pinctrl-names = "default";
129 pinctrl-0 = <&nand_sel>;
130 nand_sel: nand_sel {
131 function = "nand";
132 groups = "nand_grp";
133 };
134};
135
136&qspi {
137 bspi-sel = <0>;
138 flash: m25p80@0 {
139 #address-cells = <1>;
140 #size-cells = <1>;
141 compatible = "m25p80";
142 reg = <0x0>;
143 spi-max-frequency = <12500000>;
144 m25p,fast-read;
145 spi-cpol;
146 spi-cpha;
147
148 partition@0 {
149 label = "boot";
150 reg = <0x00000000 0x000a0000>;
151 };
152
153 partition@a0000 {
154 label = "env";
155 reg = <0x000a0000 0x00060000>;
156 };
157
158 partition@100000 {
159 label = "system";
160 reg = <0x00100000 0x00600000>;
161 };
162
163 partition@700000 {
164 label = "rootfs";
165 reg = <0x00700000 0x01900000>;
166 };
167 };
168};
169
170&srab {
171 compatible = "brcm,bcm58622-srab", "brcm,nsp-srab";
172 status = "okay";
173
174 ports {
175 #address-cells = <1>;
176 #size-cells = <0>;
177
178 port@0 {
179 label = "port0";
180 reg = <0>;
181 };
182
183 port@1 {
184 label = "port1";
185 reg = <1>;
186 };
187
188 port@2 {
189 label = "port2";
190 reg = <2>;
191 };
192
193 port@3 {
194 label = "port3";
195 reg = <3>;
196 };
197
198 port@4 {
199 label = "port4";
200 reg = <4>;
201 };
202
203 port@8 {
204 ethernet = <&amac2>;
205 label = "cpu";
206 reg = <8>;
207 fixed-link {
208 speed = <1000>;
209 full-duplex;
210 };
211 };
212 };
213};
214
215&uart0 {
216 status = "okay";
217};
218
219&usb3_phy {
220 status = "okay";
221};
222
223&xhci {
224 status = "okay";
225};
1/*
2 * BSD LICENSE
3 *
4 * Copyright(c) 2016 Broadcom. All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 *
10 * * Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * * Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in
14 * the documentation and/or other materials provided with the
15 * distribution.
16 * * Neither the name of Broadcom Corporation nor the names of its
17 * contributors may be used to endorse or promote products derived
18 * from this software without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33/dts-v1/;
34
35#include "bcm-nsp.dtsi"
36#include <dt-bindings/gpio/gpio.h>
37
38/ {
39 model = "NorthStar Plus SVK (BCM958622HR)";
40 compatible = "brcm,bcm58622", "brcm,nsp";
41
42 aliases {
43 serial0 = &uart0;
44 };
45
46 chosen {
47 stdout-path = "serial0:115200n8";
48 };
49
50 memory {
51 device_type = "memory";
52 reg = <0x60000000 0x80000000>;
53 };
54
55 gpio-restart {
56 compatible = "gpio-restart";
57 gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
58 priority = <200>;
59 };
60};
61
62/* USB 2/3 and SLIC support needed to be complete */
63
64&amac0 {
65 status = "okay";
66};
67
68&nand {
69 nandcs@0 {
70 compatible = "brcm,nandcs";
71 reg = <0>;
72 nand-on-flash-bbt;
73
74 #address-cells = <1>;
75 #size-cells = <1>;
76
77 nand-ecc-strength = <24>;
78 nand-ecc-step-size = <1024>;
79
80 brcm,nand-oob-sector-size = <27>;
81
82 partition@0 {
83 label = "nboot";
84 reg = <0x00000000 0x00200000>;
85 read-only;
86 };
87 partition@200000 {
88 label = "nenv";
89 reg = <0x00200000 0x00400000>;
90 };
91 partition@600000 {
92 label = "nsystem";
93 reg = <0x00600000 0x00a00000>;
94 };
95 partition@1000000 {
96 label = "nrootfs";
97 reg = <0x01000000 0x03000000>;
98 };
99 partition@4000000 {
100 label = "ncustfs";
101 reg = <0x04000000 0x3c000000>;
102 };
103 };
104};
105
106&pcie0 {
107 status = "okay";
108};
109
110&pcie1 {
111 status = "okay";
112};
113
114&pinctrl {
115 pinctrl-names = "default";
116 pinctrl-0 = <&nand_sel>;
117 nand_sel: nand_sel {
118 function = "nand";
119 groups = "nand_grp";
120 };
121};
122
123&srab {
124 compatible = "brcm,bcm58622-srab", "brcm,nsp-srab";
125 status = "okay";
126
127 ports {
128 #address-cells = <1>;
129 #size-cells = <0>;
130
131 port@0 {
132 label = "port0";
133 reg = <0>;
134 };
135
136 port@1 {
137 label = "port1";
138 reg = <1>;
139 };
140
141 port@2 {
142 label = "port2";
143 reg = <2>;
144 };
145
146 port@3 {
147 label = "port3";
148 reg = <3>;
149 };
150
151 port@4 {
152 label = "port4";
153 reg = <4>;
154 };
155
156 port@5 {
157 ethernet = <&amac0>;
158 label = "cpu";
159 reg = <5>;
160 fixed-link {
161 speed = <1000>;
162 full-duplex;
163 };
164 };
165 };
166};
167
168&uart0 {
169 status = "okay";
170};