Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright (c) 2010 Sascha Hauer <s.hauer@pengutronix.de>
4 * Copyright (C) 2005-2009 Freescale Semiconductor, Inc.
5 */
6#include <linux/export.h>
7#include <linux/module.h>
8#include <linux/types.h>
9#include <linux/errno.h>
10#include <linux/io.h>
11#include <linux/err.h>
12#include <linux/platform_device.h>
13
14#include <video/imx-ipu-v3.h>
15#include "ipu-prv.h"
16
17struct ipu_di {
18 void __iomem *base;
19 int id;
20 u32 module;
21 struct clk *clk_di; /* display input clock */
22 struct clk *clk_ipu; /* IPU bus clock */
23 struct clk *clk_di_pixel; /* resulting pixel clock */
24 bool inuse;
25 struct ipu_soc *ipu;
26};
27
28static DEFINE_MUTEX(di_mutex);
29
30struct di_sync_config {
31 int run_count;
32 int run_src;
33 int offset_count;
34 int offset_src;
35 int repeat_count;
36 int cnt_clr_src;
37 int cnt_polarity_gen_en;
38 int cnt_polarity_clr_src;
39 int cnt_polarity_trigger_src;
40 int cnt_up;
41 int cnt_down;
42};
43
44enum di_pins {
45 DI_PIN11 = 0,
46 DI_PIN12 = 1,
47 DI_PIN13 = 2,
48 DI_PIN14 = 3,
49 DI_PIN15 = 4,
50 DI_PIN16 = 5,
51 DI_PIN17 = 6,
52 DI_PIN_CS = 7,
53
54 DI_PIN_SER_CLK = 0,
55 DI_PIN_SER_RS = 1,
56};
57
58enum di_sync_wave {
59 DI_SYNC_NONE = 0,
60 DI_SYNC_CLK = 1,
61 DI_SYNC_INT_HSYNC = 2,
62 DI_SYNC_HSYNC = 3,
63 DI_SYNC_VSYNC = 4,
64 DI_SYNC_DE = 6,
65
66 DI_SYNC_CNT1 = 2, /* counter >= 2 only */
67 DI_SYNC_CNT4 = 5, /* counter >= 5 only */
68 DI_SYNC_CNT5 = 6, /* counter >= 6 only */
69};
70
71#define SYNC_WAVE 0
72
73#define DI_GENERAL 0x0000
74#define DI_BS_CLKGEN0 0x0004
75#define DI_BS_CLKGEN1 0x0008
76#define DI_SW_GEN0(gen) (0x000c + 4 * ((gen) - 1))
77#define DI_SW_GEN1(gen) (0x0030 + 4 * ((gen) - 1))
78#define DI_STP_REP(gen) (0x0148 + 4 * (((gen) - 1)/2))
79#define DI_SYNC_AS_GEN 0x0054
80#define DI_DW_GEN(gen) (0x0058 + 4 * (gen))
81#define DI_DW_SET(gen, set) (0x0088 + 4 * ((gen) + 0xc * (set)))
82#define DI_SER_CONF 0x015c
83#define DI_SSC 0x0160
84#define DI_POL 0x0164
85#define DI_AW0 0x0168
86#define DI_AW1 0x016c
87#define DI_SCR_CONF 0x0170
88#define DI_STAT 0x0174
89
90#define DI_SW_GEN0_RUN_COUNT(x) ((x) << 19)
91#define DI_SW_GEN0_RUN_SRC(x) ((x) << 16)
92#define DI_SW_GEN0_OFFSET_COUNT(x) ((x) << 3)
93#define DI_SW_GEN0_OFFSET_SRC(x) ((x) << 0)
94
95#define DI_SW_GEN1_CNT_POL_GEN_EN(x) ((x) << 29)
96#define DI_SW_GEN1_CNT_CLR_SRC(x) ((x) << 25)
97#define DI_SW_GEN1_CNT_POL_TRIGGER_SRC(x) ((x) << 12)
98#define DI_SW_GEN1_CNT_POL_CLR_SRC(x) ((x) << 9)
99#define DI_SW_GEN1_CNT_DOWN(x) ((x) << 16)
100#define DI_SW_GEN1_CNT_UP(x) (x)
101#define DI_SW_GEN1_AUTO_RELOAD (0x10000000)
102
103#define DI_DW_GEN_ACCESS_SIZE_OFFSET 24
104#define DI_DW_GEN_COMPONENT_SIZE_OFFSET 16
105
106#define DI_GEN_POLARITY_1 (1 << 0)
107#define DI_GEN_POLARITY_2 (1 << 1)
108#define DI_GEN_POLARITY_3 (1 << 2)
109#define DI_GEN_POLARITY_4 (1 << 3)
110#define DI_GEN_POLARITY_5 (1 << 4)
111#define DI_GEN_POLARITY_6 (1 << 5)
112#define DI_GEN_POLARITY_7 (1 << 6)
113#define DI_GEN_POLARITY_8 (1 << 7)
114#define DI_GEN_POLARITY_DISP_CLK (1 << 17)
115#define DI_GEN_DI_CLK_EXT (1 << 20)
116#define DI_GEN_DI_VSYNC_EXT (1 << 21)
117
118#define DI_POL_DRDY_DATA_POLARITY (1 << 7)
119#define DI_POL_DRDY_POLARITY_15 (1 << 4)
120
121#define DI_VSYNC_SEL_OFFSET 13
122
123static inline u32 ipu_di_read(struct ipu_di *di, unsigned offset)
124{
125 return readl(di->base + offset);
126}
127
128static inline void ipu_di_write(struct ipu_di *di, u32 value, unsigned offset)
129{
130 writel(value, di->base + offset);
131}
132
133static void ipu_di_data_wave_config(struct ipu_di *di,
134 int wave_gen,
135 int access_size, int component_size)
136{
137 u32 reg;
138 reg = (access_size << DI_DW_GEN_ACCESS_SIZE_OFFSET) |
139 (component_size << DI_DW_GEN_COMPONENT_SIZE_OFFSET);
140 ipu_di_write(di, reg, DI_DW_GEN(wave_gen));
141}
142
143static void ipu_di_data_pin_config(struct ipu_di *di, int wave_gen, int di_pin,
144 int set, int up, int down)
145{
146 u32 reg;
147
148 reg = ipu_di_read(di, DI_DW_GEN(wave_gen));
149 reg &= ~(0x3 << (di_pin * 2));
150 reg |= set << (di_pin * 2);
151 ipu_di_write(di, reg, DI_DW_GEN(wave_gen));
152
153 ipu_di_write(di, (down << 16) | up, DI_DW_SET(wave_gen, set));
154}
155
156static void ipu_di_sync_config(struct ipu_di *di, struct di_sync_config *config,
157 int start, int count)
158{
159 u32 reg;
160 int i;
161
162 for (i = 0; i < count; i++) {
163 struct di_sync_config *c = &config[i];
164 int wave_gen = start + i + 1;
165
166 if ((c->run_count >= 0x1000) || (c->offset_count >= 0x1000) ||
167 (c->repeat_count >= 0x1000) ||
168 (c->cnt_up >= 0x400) ||
169 (c->cnt_down >= 0x400)) {
170 dev_err(di->ipu->dev, "DI%d counters out of range.\n",
171 di->id);
172 return;
173 }
174
175 reg = DI_SW_GEN0_RUN_COUNT(c->run_count) |
176 DI_SW_GEN0_RUN_SRC(c->run_src) |
177 DI_SW_GEN0_OFFSET_COUNT(c->offset_count) |
178 DI_SW_GEN0_OFFSET_SRC(c->offset_src);
179 ipu_di_write(di, reg, DI_SW_GEN0(wave_gen));
180
181 reg = DI_SW_GEN1_CNT_POL_GEN_EN(c->cnt_polarity_gen_en) |
182 DI_SW_GEN1_CNT_CLR_SRC(c->cnt_clr_src) |
183 DI_SW_GEN1_CNT_POL_TRIGGER_SRC(
184 c->cnt_polarity_trigger_src) |
185 DI_SW_GEN1_CNT_POL_CLR_SRC(c->cnt_polarity_clr_src) |
186 DI_SW_GEN1_CNT_DOWN(c->cnt_down) |
187 DI_SW_GEN1_CNT_UP(c->cnt_up);
188
189 /* Enable auto reload */
190 if (c->repeat_count == 0)
191 reg |= DI_SW_GEN1_AUTO_RELOAD;
192
193 ipu_di_write(di, reg, DI_SW_GEN1(wave_gen));
194
195 reg = ipu_di_read(di, DI_STP_REP(wave_gen));
196 reg &= ~(0xffff << (16 * ((wave_gen - 1) & 0x1)));
197 reg |= c->repeat_count << (16 * ((wave_gen - 1) & 0x1));
198 ipu_di_write(di, reg, DI_STP_REP(wave_gen));
199 }
200}
201
202static void ipu_di_sync_config_interlaced(struct ipu_di *di,
203 struct ipu_di_signal_cfg *sig)
204{
205 u32 h_total = sig->mode.hactive + sig->mode.hsync_len +
206 sig->mode.hback_porch + sig->mode.hfront_porch;
207 u32 v_total = sig->mode.vactive + sig->mode.vsync_len +
208 sig->mode.vback_porch + sig->mode.vfront_porch;
209 struct di_sync_config cfg[] = {
210 {
211 /* 1: internal VSYNC for each frame */
212 .run_count = v_total * 2 - 1,
213 .run_src = 3, /* == counter 7 */
214 }, {
215 /* PIN2: HSYNC waveform */
216 .run_count = h_total - 1,
217 .run_src = DI_SYNC_CLK,
218 .cnt_polarity_gen_en = 1,
219 .cnt_polarity_trigger_src = DI_SYNC_CLK,
220 .cnt_down = sig->mode.hsync_len * 2,
221 }, {
222 /* PIN3: VSYNC waveform */
223 .run_count = v_total - 1,
224 .run_src = 4, /* == counter 7 */
225 .cnt_polarity_gen_en = 1,
226 .cnt_polarity_trigger_src = 4, /* == counter 7 */
227 .cnt_down = sig->mode.vsync_len * 2,
228 .cnt_clr_src = DI_SYNC_CNT1,
229 }, {
230 /* 4: Field */
231 .run_count = v_total / 2,
232 .run_src = DI_SYNC_HSYNC,
233 .offset_count = h_total / 2,
234 .offset_src = DI_SYNC_CLK,
235 .repeat_count = 2,
236 .cnt_clr_src = DI_SYNC_CNT1,
237 }, {
238 /* 5: Active lines */
239 .run_src = DI_SYNC_HSYNC,
240 .offset_count = (sig->mode.vsync_len +
241 sig->mode.vback_porch) / 2,
242 .offset_src = DI_SYNC_HSYNC,
243 .repeat_count = sig->mode.vactive / 2,
244 .cnt_clr_src = DI_SYNC_CNT4,
245 }, {
246 /* 6: Active pixel, referenced by DC */
247 .run_src = DI_SYNC_CLK,
248 .offset_count = sig->mode.hsync_len +
249 sig->mode.hback_porch,
250 .offset_src = DI_SYNC_CLK,
251 .repeat_count = sig->mode.hactive,
252 .cnt_clr_src = DI_SYNC_CNT5,
253 }, {
254 /* 7: Half line HSYNC */
255 .run_count = h_total / 2 - 1,
256 .run_src = DI_SYNC_CLK,
257 }
258 };
259
260 ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg));
261
262 ipu_di_write(di, v_total / 2 - 1, DI_SCR_CONF);
263}
264
265static void ipu_di_sync_config_noninterlaced(struct ipu_di *di,
266 struct ipu_di_signal_cfg *sig, int div)
267{
268 u32 h_total = sig->mode.hactive + sig->mode.hsync_len +
269 sig->mode.hback_porch + sig->mode.hfront_porch;
270 u32 v_total = sig->mode.vactive + sig->mode.vsync_len +
271 sig->mode.vback_porch + sig->mode.vfront_porch;
272 struct di_sync_config cfg[] = {
273 {
274 /* 1: INT_HSYNC */
275 .run_count = h_total - 1,
276 .run_src = DI_SYNC_CLK,
277 } , {
278 /* PIN2: HSYNC */
279 .run_count = h_total - 1,
280 .run_src = DI_SYNC_CLK,
281 .offset_count = div * sig->v_to_h_sync,
282 .offset_src = DI_SYNC_CLK,
283 .cnt_polarity_gen_en = 1,
284 .cnt_polarity_trigger_src = DI_SYNC_CLK,
285 .cnt_down = sig->mode.hsync_len * 2,
286 } , {
287 /* PIN3: VSYNC */
288 .run_count = v_total - 1,
289 .run_src = DI_SYNC_INT_HSYNC,
290 .cnt_polarity_gen_en = 1,
291 .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
292 .cnt_down = sig->mode.vsync_len * 2,
293 } , {
294 /* 4: Line Active */
295 .run_src = DI_SYNC_HSYNC,
296 .offset_count = sig->mode.vsync_len +
297 sig->mode.vback_porch,
298 .offset_src = DI_SYNC_HSYNC,
299 .repeat_count = sig->mode.vactive,
300 .cnt_clr_src = DI_SYNC_VSYNC,
301 } , {
302 /* 5: Pixel Active, referenced by DC */
303 .run_src = DI_SYNC_CLK,
304 .offset_count = sig->mode.hsync_len +
305 sig->mode.hback_porch,
306 .offset_src = DI_SYNC_CLK,
307 .repeat_count = sig->mode.hactive,
308 .cnt_clr_src = 5, /* Line Active */
309 } , {
310 /* unused */
311 } , {
312 /* unused */
313 } , {
314 /* unused */
315 } , {
316 /* unused */
317 },
318 };
319 /* can't use #7 and #8 for line active and pixel active counters */
320 struct di_sync_config cfg_vga[] = {
321 {
322 /* 1: INT_HSYNC */
323 .run_count = h_total - 1,
324 .run_src = DI_SYNC_CLK,
325 } , {
326 /* 2: VSYNC */
327 .run_count = v_total - 1,
328 .run_src = DI_SYNC_INT_HSYNC,
329 } , {
330 /* 3: Line Active */
331 .run_src = DI_SYNC_INT_HSYNC,
332 .offset_count = sig->mode.vsync_len +
333 sig->mode.vback_porch,
334 .offset_src = DI_SYNC_INT_HSYNC,
335 .repeat_count = sig->mode.vactive,
336 .cnt_clr_src = 3 /* VSYNC */,
337 } , {
338 /* PIN4: HSYNC for VGA via TVEv2 on TQ MBa53 */
339 .run_count = h_total - 1,
340 .run_src = DI_SYNC_CLK,
341 .offset_count = div * sig->v_to_h_sync + 18, /* magic value from Freescale TVE driver */
342 .offset_src = DI_SYNC_CLK,
343 .cnt_polarity_gen_en = 1,
344 .cnt_polarity_trigger_src = DI_SYNC_CLK,
345 .cnt_down = sig->mode.hsync_len * 2,
346 } , {
347 /* 5: Pixel Active signal to DC */
348 .run_src = DI_SYNC_CLK,
349 .offset_count = sig->mode.hsync_len +
350 sig->mode.hback_porch,
351 .offset_src = DI_SYNC_CLK,
352 .repeat_count = sig->mode.hactive,
353 .cnt_clr_src = 4, /* Line Active */
354 } , {
355 /* PIN6: VSYNC for VGA via TVEv2 on TQ MBa53 */
356 .run_count = v_total - 1,
357 .run_src = DI_SYNC_INT_HSYNC,
358 .offset_count = 1, /* magic value from Freescale TVE driver */
359 .offset_src = DI_SYNC_INT_HSYNC,
360 .cnt_polarity_gen_en = 1,
361 .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
362 .cnt_down = sig->mode.vsync_len * 2,
363 } , {
364 /* PIN4: HSYNC for VGA via TVEv2 on i.MX53-QSB */
365 .run_count = h_total - 1,
366 .run_src = DI_SYNC_CLK,
367 .offset_count = div * sig->v_to_h_sync + 18, /* magic value from Freescale TVE driver */
368 .offset_src = DI_SYNC_CLK,
369 .cnt_polarity_gen_en = 1,
370 .cnt_polarity_trigger_src = DI_SYNC_CLK,
371 .cnt_down = sig->mode.hsync_len * 2,
372 } , {
373 /* PIN6: VSYNC for VGA via TVEv2 on i.MX53-QSB */
374 .run_count = v_total - 1,
375 .run_src = DI_SYNC_INT_HSYNC,
376 .offset_count = 1, /* magic value from Freescale TVE driver */
377 .offset_src = DI_SYNC_INT_HSYNC,
378 .cnt_polarity_gen_en = 1,
379 .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
380 .cnt_down = sig->mode.vsync_len * 2,
381 } , {
382 /* unused */
383 },
384 };
385
386 ipu_di_write(di, v_total - 1, DI_SCR_CONF);
387 if (sig->hsync_pin == 2 && sig->vsync_pin == 3)
388 ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg));
389 else
390 ipu_di_sync_config(di, cfg_vga, 0, ARRAY_SIZE(cfg_vga));
391}
392
393static void ipu_di_config_clock(struct ipu_di *di,
394 const struct ipu_di_signal_cfg *sig)
395{
396 struct clk *clk;
397 unsigned clkgen0;
398 uint32_t val;
399
400 if (sig->clkflags & IPU_DI_CLKMODE_EXT) {
401 /*
402 * CLKMODE_EXT means we must use the DI clock: this is
403 * needed for things like LVDS which needs to feed the
404 * DI and LDB with the same pixel clock.
405 */
406 clk = di->clk_di;
407
408 if (sig->clkflags & IPU_DI_CLKMODE_SYNC) {
409 /*
410 * CLKMODE_SYNC means that we want the DI to be
411 * clocked at the same rate as the parent clock.
412 * This is needed (eg) for LDB which needs to be
413 * fed with the same pixel clock. We assume that
414 * the LDB clock has already been set correctly.
415 */
416 clkgen0 = 1 << 4;
417 } else {
418 /*
419 * We can use the divider. We should really have
420 * a flag here indicating whether the bridge can
421 * cope with a fractional divider or not. For the
422 * time being, let's go for simplicitly and
423 * reliability.
424 */
425 unsigned long in_rate;
426 unsigned div;
427
428 clk_set_rate(clk, sig->mode.pixelclock);
429
430 in_rate = clk_get_rate(clk);
431 div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock);
432 div = clamp(div, 1U, 255U);
433
434 clkgen0 = div << 4;
435 }
436 } else {
437 /*
438 * For other interfaces, we can arbitarily select between
439 * the DI specific clock and the internal IPU clock. See
440 * DI_GENERAL bit 20. We select the IPU clock if it can
441 * give us a clock rate within 1% of the requested frequency,
442 * otherwise we use the DI clock.
443 */
444 unsigned long rate, clkrate;
445 unsigned div, error;
446
447 clkrate = clk_get_rate(di->clk_ipu);
448 div = DIV_ROUND_CLOSEST(clkrate, sig->mode.pixelclock);
449 div = clamp(div, 1U, 255U);
450 rate = clkrate / div;
451
452 error = rate / (sig->mode.pixelclock / 1000);
453
454 dev_dbg(di->ipu->dev, " IPU clock can give %lu with divider %u, error %d.%u%%\n",
455 rate, div, (signed)(error - 1000) / 10, error % 10);
456
457 /* Allow a 1% error */
458 if (error < 1010 && error >= 990) {
459 clk = di->clk_ipu;
460
461 clkgen0 = div << 4;
462 } else {
463 unsigned long in_rate;
464 unsigned div;
465
466 clk = di->clk_di;
467
468 clk_set_rate(clk, sig->mode.pixelclock);
469
470 in_rate = clk_get_rate(clk);
471 div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock);
472 div = clamp(div, 1U, 255U);
473
474 clkgen0 = div << 4;
475 }
476 }
477
478 di->clk_di_pixel = clk;
479
480 /* Set the divider */
481 ipu_di_write(di, clkgen0, DI_BS_CLKGEN0);
482
483 /*
484 * Set the high/low periods. Bits 24:16 give us the falling edge,
485 * and bits 8:0 give the rising edge. LSB is fraction, and is
486 * based on the divider above. We want a 50% duty cycle, so set
487 * the falling edge to be half the divider.
488 */
489 ipu_di_write(di, (clkgen0 >> 4) << 16, DI_BS_CLKGEN1);
490
491 /* Finally select the input clock */
492 val = ipu_di_read(di, DI_GENERAL) & ~DI_GEN_DI_CLK_EXT;
493 if (clk == di->clk_di)
494 val |= DI_GEN_DI_CLK_EXT;
495 ipu_di_write(di, val, DI_GENERAL);
496
497 dev_dbg(di->ipu->dev, "Want %luHz IPU %luHz DI %luHz using %s, %luHz\n",
498 sig->mode.pixelclock,
499 clk_get_rate(di->clk_ipu),
500 clk_get_rate(di->clk_di),
501 clk == di->clk_di ? "DI" : "IPU",
502 clk_get_rate(di->clk_di_pixel) / (clkgen0 >> 4));
503}
504
505/*
506 * This function is called to adjust a video mode to IPU restrictions.
507 * It is meant to be called from drm crtc mode_fixup() methods.
508 */
509int ipu_di_adjust_videomode(struct ipu_di *di, struct videomode *mode)
510{
511 u32 diff;
512
513 if (mode->vfront_porch >= 2)
514 return 0;
515
516 diff = 2 - mode->vfront_porch;
517
518 if (mode->vback_porch >= diff) {
519 mode->vfront_porch = 2;
520 mode->vback_porch -= diff;
521 } else if (mode->vsync_len > diff) {
522 mode->vfront_porch = 2;
523 mode->vsync_len = mode->vsync_len - diff;
524 } else {
525 dev_warn(di->ipu->dev, "failed to adjust videomode\n");
526 return -EINVAL;
527 }
528
529 dev_dbg(di->ipu->dev, "videomode adapted for IPU restrictions\n");
530 return 0;
531}
532EXPORT_SYMBOL_GPL(ipu_di_adjust_videomode);
533
534static u32 ipu_di_gen_polarity(int pin)
535{
536 switch (pin) {
537 case 1:
538 return DI_GEN_POLARITY_1;
539 case 2:
540 return DI_GEN_POLARITY_2;
541 case 3:
542 return DI_GEN_POLARITY_3;
543 case 4:
544 return DI_GEN_POLARITY_4;
545 case 5:
546 return DI_GEN_POLARITY_5;
547 case 6:
548 return DI_GEN_POLARITY_6;
549 case 7:
550 return DI_GEN_POLARITY_7;
551 case 8:
552 return DI_GEN_POLARITY_8;
553 }
554 return 0;
555}
556
557int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
558{
559 u32 reg;
560 u32 di_gen, vsync_cnt;
561 u32 div;
562
563 dev_dbg(di->ipu->dev, "disp %d: panel size = %d x %d\n",
564 di->id, sig->mode.hactive, sig->mode.vactive);
565
566 dev_dbg(di->ipu->dev, "Clocks: IPU %luHz DI %luHz Needed %luHz\n",
567 clk_get_rate(di->clk_ipu),
568 clk_get_rate(di->clk_di),
569 sig->mode.pixelclock);
570
571 mutex_lock(&di_mutex);
572
573 ipu_di_config_clock(di, sig);
574
575 div = ipu_di_read(di, DI_BS_CLKGEN0) & 0xfff;
576 div = div / 16; /* Now divider is integer portion */
577
578 /* Setup pixel clock timing */
579 /* Down time is half of period */
580 ipu_di_write(di, (div << 16), DI_BS_CLKGEN1);
581
582 ipu_di_data_wave_config(di, SYNC_WAVE, div - 1, div - 1);
583 ipu_di_data_pin_config(di, SYNC_WAVE, DI_PIN15, 3, 0, div * 2);
584
585 di_gen = ipu_di_read(di, DI_GENERAL) & DI_GEN_DI_CLK_EXT;
586 di_gen |= DI_GEN_DI_VSYNC_EXT;
587
588 if (sig->mode.flags & DISPLAY_FLAGS_INTERLACED) {
589 ipu_di_sync_config_interlaced(di, sig);
590
591 /* set y_sel = 1 */
592 di_gen |= 0x10000000;
593
594 vsync_cnt = 3;
595 } else {
596 ipu_di_sync_config_noninterlaced(di, sig, div);
597
598 vsync_cnt = 3;
599 if (di->id == 1)
600 /*
601 * TODO: change only for TVEv2, parallel display
602 * uses pin 2 / 3
603 */
604 if (!(sig->hsync_pin == 2 && sig->vsync_pin == 3))
605 vsync_cnt = 6;
606 }
607
608 if (sig->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH)
609 di_gen |= ipu_di_gen_polarity(sig->hsync_pin);
610 if (sig->mode.flags & DISPLAY_FLAGS_VSYNC_HIGH)
611 di_gen |= ipu_di_gen_polarity(sig->vsync_pin);
612
613 if (sig->clk_pol)
614 di_gen |= DI_GEN_POLARITY_DISP_CLK;
615
616 ipu_di_write(di, di_gen, DI_GENERAL);
617
618 ipu_di_write(di, (--vsync_cnt << DI_VSYNC_SEL_OFFSET) | 0x00000002,
619 DI_SYNC_AS_GEN);
620
621 reg = ipu_di_read(di, DI_POL);
622 reg &= ~(DI_POL_DRDY_DATA_POLARITY | DI_POL_DRDY_POLARITY_15);
623
624 if (sig->enable_pol)
625 reg |= DI_POL_DRDY_POLARITY_15;
626 if (sig->data_pol)
627 reg |= DI_POL_DRDY_DATA_POLARITY;
628
629 ipu_di_write(di, reg, DI_POL);
630
631 mutex_unlock(&di_mutex);
632
633 return 0;
634}
635EXPORT_SYMBOL_GPL(ipu_di_init_sync_panel);
636
637int ipu_di_enable(struct ipu_di *di)
638{
639 int ret;
640
641 WARN_ON(IS_ERR(di->clk_di_pixel));
642
643 ret = clk_prepare_enable(di->clk_di_pixel);
644 if (ret)
645 return ret;
646
647 ipu_module_enable(di->ipu, di->module);
648
649 return 0;
650}
651EXPORT_SYMBOL_GPL(ipu_di_enable);
652
653int ipu_di_disable(struct ipu_di *di)
654{
655 WARN_ON(IS_ERR(di->clk_di_pixel));
656
657 ipu_module_disable(di->ipu, di->module);
658
659 clk_disable_unprepare(di->clk_di_pixel);
660
661 return 0;
662}
663EXPORT_SYMBOL_GPL(ipu_di_disable);
664
665int ipu_di_get_num(struct ipu_di *di)
666{
667 return di->id;
668}
669EXPORT_SYMBOL_GPL(ipu_di_get_num);
670
671static DEFINE_MUTEX(ipu_di_lock);
672
673struct ipu_di *ipu_di_get(struct ipu_soc *ipu, int disp)
674{
675 struct ipu_di *di;
676
677 if (disp > 1)
678 return ERR_PTR(-EINVAL);
679
680 di = ipu->di_priv[disp];
681
682 mutex_lock(&ipu_di_lock);
683
684 if (di->inuse) {
685 di = ERR_PTR(-EBUSY);
686 goto out;
687 }
688
689 di->inuse = true;
690out:
691 mutex_unlock(&ipu_di_lock);
692
693 return di;
694}
695EXPORT_SYMBOL_GPL(ipu_di_get);
696
697void ipu_di_put(struct ipu_di *di)
698{
699 mutex_lock(&ipu_di_lock);
700
701 di->inuse = false;
702
703 mutex_unlock(&ipu_di_lock);
704}
705EXPORT_SYMBOL_GPL(ipu_di_put);
706
707int ipu_di_init(struct ipu_soc *ipu, struct device *dev, int id,
708 unsigned long base,
709 u32 module, struct clk *clk_ipu)
710{
711 struct ipu_di *di;
712
713 if (id > 1)
714 return -ENODEV;
715
716 di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
717 if (!di)
718 return -ENOMEM;
719
720 ipu->di_priv[id] = di;
721
722 di->clk_di = devm_clk_get(dev, id ? "di1" : "di0");
723 if (IS_ERR(di->clk_di))
724 return PTR_ERR(di->clk_di);
725
726 di->module = module;
727 di->id = id;
728 di->clk_ipu = clk_ipu;
729 di->base = devm_ioremap(dev, base, PAGE_SIZE);
730 if (!di->base)
731 return -ENOMEM;
732
733 ipu_di_write(di, 0x10, DI_BS_CLKGEN0);
734
735 dev_dbg(dev, "DI%d base: 0x%08lx remapped to %p\n",
736 id, base, di->base);
737 di->inuse = false;
738 di->ipu = ipu;
739
740 return 0;
741}
742
743void ipu_di_exit(struct ipu_soc *ipu, int id)
744{
745}
1/*
2 * Copyright (c) 2010 Sascha Hauer <s.hauer@pengutronix.de>
3 * Copyright (C) 2005-2009 Freescale Semiconductor, Inc.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License as published by the
7 * Free Software Foundation; either version 2 of the License, or (at your
8 * option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
12 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
13 * for more details.
14 */
15#include <linux/export.h>
16#include <linux/module.h>
17#include <linux/types.h>
18#include <linux/errno.h>
19#include <linux/io.h>
20#include <linux/err.h>
21#include <linux/platform_device.h>
22
23#include <video/imx-ipu-v3.h>
24#include "ipu-prv.h"
25
26struct ipu_di {
27 void __iomem *base;
28 int id;
29 u32 module;
30 struct clk *clk_di; /* display input clock */
31 struct clk *clk_ipu; /* IPU bus clock */
32 struct clk *clk_di_pixel; /* resulting pixel clock */
33 bool inuse;
34 struct ipu_soc *ipu;
35};
36
37static DEFINE_MUTEX(di_mutex);
38
39struct di_sync_config {
40 int run_count;
41 int run_src;
42 int offset_count;
43 int offset_src;
44 int repeat_count;
45 int cnt_clr_src;
46 int cnt_polarity_gen_en;
47 int cnt_polarity_clr_src;
48 int cnt_polarity_trigger_src;
49 int cnt_up;
50 int cnt_down;
51};
52
53enum di_pins {
54 DI_PIN11 = 0,
55 DI_PIN12 = 1,
56 DI_PIN13 = 2,
57 DI_PIN14 = 3,
58 DI_PIN15 = 4,
59 DI_PIN16 = 5,
60 DI_PIN17 = 6,
61 DI_PIN_CS = 7,
62
63 DI_PIN_SER_CLK = 0,
64 DI_PIN_SER_RS = 1,
65};
66
67enum di_sync_wave {
68 DI_SYNC_NONE = 0,
69 DI_SYNC_CLK = 1,
70 DI_SYNC_INT_HSYNC = 2,
71 DI_SYNC_HSYNC = 3,
72 DI_SYNC_VSYNC = 4,
73 DI_SYNC_DE = 6,
74
75 DI_SYNC_CNT1 = 2, /* counter >= 2 only */
76 DI_SYNC_CNT4 = 5, /* counter >= 5 only */
77 DI_SYNC_CNT5 = 6, /* counter >= 6 only */
78};
79
80#define SYNC_WAVE 0
81
82#define DI_GENERAL 0x0000
83#define DI_BS_CLKGEN0 0x0004
84#define DI_BS_CLKGEN1 0x0008
85#define DI_SW_GEN0(gen) (0x000c + 4 * ((gen) - 1))
86#define DI_SW_GEN1(gen) (0x0030 + 4 * ((gen) - 1))
87#define DI_STP_REP(gen) (0x0148 + 4 * (((gen) - 1)/2))
88#define DI_SYNC_AS_GEN 0x0054
89#define DI_DW_GEN(gen) (0x0058 + 4 * (gen))
90#define DI_DW_SET(gen, set) (0x0088 + 4 * ((gen) + 0xc * (set)))
91#define DI_SER_CONF 0x015c
92#define DI_SSC 0x0160
93#define DI_POL 0x0164
94#define DI_AW0 0x0168
95#define DI_AW1 0x016c
96#define DI_SCR_CONF 0x0170
97#define DI_STAT 0x0174
98
99#define DI_SW_GEN0_RUN_COUNT(x) ((x) << 19)
100#define DI_SW_GEN0_RUN_SRC(x) ((x) << 16)
101#define DI_SW_GEN0_OFFSET_COUNT(x) ((x) << 3)
102#define DI_SW_GEN0_OFFSET_SRC(x) ((x) << 0)
103
104#define DI_SW_GEN1_CNT_POL_GEN_EN(x) ((x) << 29)
105#define DI_SW_GEN1_CNT_CLR_SRC(x) ((x) << 25)
106#define DI_SW_GEN1_CNT_POL_TRIGGER_SRC(x) ((x) << 12)
107#define DI_SW_GEN1_CNT_POL_CLR_SRC(x) ((x) << 9)
108#define DI_SW_GEN1_CNT_DOWN(x) ((x) << 16)
109#define DI_SW_GEN1_CNT_UP(x) (x)
110#define DI_SW_GEN1_AUTO_RELOAD (0x10000000)
111
112#define DI_DW_GEN_ACCESS_SIZE_OFFSET 24
113#define DI_DW_GEN_COMPONENT_SIZE_OFFSET 16
114
115#define DI_GEN_POLARITY_1 (1 << 0)
116#define DI_GEN_POLARITY_2 (1 << 1)
117#define DI_GEN_POLARITY_3 (1 << 2)
118#define DI_GEN_POLARITY_4 (1 << 3)
119#define DI_GEN_POLARITY_5 (1 << 4)
120#define DI_GEN_POLARITY_6 (1 << 5)
121#define DI_GEN_POLARITY_7 (1 << 6)
122#define DI_GEN_POLARITY_8 (1 << 7)
123#define DI_GEN_POLARITY_DISP_CLK (1 << 17)
124#define DI_GEN_DI_CLK_EXT (1 << 20)
125#define DI_GEN_DI_VSYNC_EXT (1 << 21)
126
127#define DI_POL_DRDY_DATA_POLARITY (1 << 7)
128#define DI_POL_DRDY_POLARITY_15 (1 << 4)
129
130#define DI_VSYNC_SEL_OFFSET 13
131
132static inline u32 ipu_di_read(struct ipu_di *di, unsigned offset)
133{
134 return readl(di->base + offset);
135}
136
137static inline void ipu_di_write(struct ipu_di *di, u32 value, unsigned offset)
138{
139 writel(value, di->base + offset);
140}
141
142static void ipu_di_data_wave_config(struct ipu_di *di,
143 int wave_gen,
144 int access_size, int component_size)
145{
146 u32 reg;
147 reg = (access_size << DI_DW_GEN_ACCESS_SIZE_OFFSET) |
148 (component_size << DI_DW_GEN_COMPONENT_SIZE_OFFSET);
149 ipu_di_write(di, reg, DI_DW_GEN(wave_gen));
150}
151
152static void ipu_di_data_pin_config(struct ipu_di *di, int wave_gen, int di_pin,
153 int set, int up, int down)
154{
155 u32 reg;
156
157 reg = ipu_di_read(di, DI_DW_GEN(wave_gen));
158 reg &= ~(0x3 << (di_pin * 2));
159 reg |= set << (di_pin * 2);
160 ipu_di_write(di, reg, DI_DW_GEN(wave_gen));
161
162 ipu_di_write(di, (down << 16) | up, DI_DW_SET(wave_gen, set));
163}
164
165static void ipu_di_sync_config(struct ipu_di *di, struct di_sync_config *config,
166 int start, int count)
167{
168 u32 reg;
169 int i;
170
171 for (i = 0; i < count; i++) {
172 struct di_sync_config *c = &config[i];
173 int wave_gen = start + i + 1;
174
175 if ((c->run_count >= 0x1000) || (c->offset_count >= 0x1000) ||
176 (c->repeat_count >= 0x1000) ||
177 (c->cnt_up >= 0x400) ||
178 (c->cnt_down >= 0x400)) {
179 dev_err(di->ipu->dev, "DI%d counters out of range.\n",
180 di->id);
181 return;
182 }
183
184 reg = DI_SW_GEN0_RUN_COUNT(c->run_count) |
185 DI_SW_GEN0_RUN_SRC(c->run_src) |
186 DI_SW_GEN0_OFFSET_COUNT(c->offset_count) |
187 DI_SW_GEN0_OFFSET_SRC(c->offset_src);
188 ipu_di_write(di, reg, DI_SW_GEN0(wave_gen));
189
190 reg = DI_SW_GEN1_CNT_POL_GEN_EN(c->cnt_polarity_gen_en) |
191 DI_SW_GEN1_CNT_CLR_SRC(c->cnt_clr_src) |
192 DI_SW_GEN1_CNT_POL_TRIGGER_SRC(
193 c->cnt_polarity_trigger_src) |
194 DI_SW_GEN1_CNT_POL_CLR_SRC(c->cnt_polarity_clr_src) |
195 DI_SW_GEN1_CNT_DOWN(c->cnt_down) |
196 DI_SW_GEN1_CNT_UP(c->cnt_up);
197
198 /* Enable auto reload */
199 if (c->repeat_count == 0)
200 reg |= DI_SW_GEN1_AUTO_RELOAD;
201
202 ipu_di_write(di, reg, DI_SW_GEN1(wave_gen));
203
204 reg = ipu_di_read(di, DI_STP_REP(wave_gen));
205 reg &= ~(0xffff << (16 * ((wave_gen - 1) & 0x1)));
206 reg |= c->repeat_count << (16 * ((wave_gen - 1) & 0x1));
207 ipu_di_write(di, reg, DI_STP_REP(wave_gen));
208 }
209}
210
211static void ipu_di_sync_config_interlaced(struct ipu_di *di,
212 struct ipu_di_signal_cfg *sig)
213{
214 u32 h_total = sig->mode.hactive + sig->mode.hsync_len +
215 sig->mode.hback_porch + sig->mode.hfront_porch;
216 u32 v_total = sig->mode.vactive + sig->mode.vsync_len +
217 sig->mode.vback_porch + sig->mode.vfront_porch;
218 struct di_sync_config cfg[] = {
219 {
220 /* 1: internal VSYNC for each frame */
221 .run_count = v_total * 2 - 1,
222 .run_src = 3, /* == counter 7 */
223 }, {
224 /* PIN2: HSYNC waveform */
225 .run_count = h_total - 1,
226 .run_src = DI_SYNC_CLK,
227 .cnt_polarity_gen_en = 1,
228 .cnt_polarity_trigger_src = DI_SYNC_CLK,
229 .cnt_down = sig->mode.hsync_len * 2,
230 }, {
231 /* PIN3: VSYNC waveform */
232 .run_count = v_total - 1,
233 .run_src = 4, /* == counter 7 */
234 .cnt_polarity_gen_en = 1,
235 .cnt_polarity_trigger_src = 4, /* == counter 7 */
236 .cnt_down = sig->mode.vsync_len * 2,
237 .cnt_clr_src = DI_SYNC_CNT1,
238 }, {
239 /* 4: Field */
240 .run_count = v_total / 2,
241 .run_src = DI_SYNC_HSYNC,
242 .offset_count = h_total / 2,
243 .offset_src = DI_SYNC_CLK,
244 .repeat_count = 2,
245 .cnt_clr_src = DI_SYNC_CNT1,
246 }, {
247 /* 5: Active lines */
248 .run_src = DI_SYNC_HSYNC,
249 .offset_count = (sig->mode.vsync_len +
250 sig->mode.vback_porch) / 2,
251 .offset_src = DI_SYNC_HSYNC,
252 .repeat_count = sig->mode.vactive / 2,
253 .cnt_clr_src = DI_SYNC_CNT4,
254 }, {
255 /* 6: Active pixel, referenced by DC */
256 .run_src = DI_SYNC_CLK,
257 .offset_count = sig->mode.hsync_len +
258 sig->mode.hback_porch,
259 .offset_src = DI_SYNC_CLK,
260 .repeat_count = sig->mode.hactive,
261 .cnt_clr_src = DI_SYNC_CNT5,
262 }, {
263 /* 7: Half line HSYNC */
264 .run_count = h_total / 2 - 1,
265 .run_src = DI_SYNC_CLK,
266 }
267 };
268
269 ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg));
270
271 ipu_di_write(di, v_total / 2 - 1, DI_SCR_CONF);
272}
273
274static void ipu_di_sync_config_noninterlaced(struct ipu_di *di,
275 struct ipu_di_signal_cfg *sig, int div)
276{
277 u32 h_total = sig->mode.hactive + sig->mode.hsync_len +
278 sig->mode.hback_porch + sig->mode.hfront_porch;
279 u32 v_total = sig->mode.vactive + sig->mode.vsync_len +
280 sig->mode.vback_porch + sig->mode.vfront_porch;
281 struct di_sync_config cfg[] = {
282 {
283 /* 1: INT_HSYNC */
284 .run_count = h_total - 1,
285 .run_src = DI_SYNC_CLK,
286 } , {
287 /* PIN2: HSYNC */
288 .run_count = h_total - 1,
289 .run_src = DI_SYNC_CLK,
290 .offset_count = div * sig->v_to_h_sync,
291 .offset_src = DI_SYNC_CLK,
292 .cnt_polarity_gen_en = 1,
293 .cnt_polarity_trigger_src = DI_SYNC_CLK,
294 .cnt_down = sig->mode.hsync_len * 2,
295 } , {
296 /* PIN3: VSYNC */
297 .run_count = v_total - 1,
298 .run_src = DI_SYNC_INT_HSYNC,
299 .cnt_polarity_gen_en = 1,
300 .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
301 .cnt_down = sig->mode.vsync_len * 2,
302 } , {
303 /* 4: Line Active */
304 .run_src = DI_SYNC_HSYNC,
305 .offset_count = sig->mode.vsync_len +
306 sig->mode.vback_porch,
307 .offset_src = DI_SYNC_HSYNC,
308 .repeat_count = sig->mode.vactive,
309 .cnt_clr_src = DI_SYNC_VSYNC,
310 } , {
311 /* 5: Pixel Active, referenced by DC */
312 .run_src = DI_SYNC_CLK,
313 .offset_count = sig->mode.hsync_len +
314 sig->mode.hback_porch,
315 .offset_src = DI_SYNC_CLK,
316 .repeat_count = sig->mode.hactive,
317 .cnt_clr_src = 5, /* Line Active */
318 } , {
319 /* unused */
320 } , {
321 /* unused */
322 } , {
323 /* unused */
324 } , {
325 /* unused */
326 },
327 };
328 /* can't use #7 and #8 for line active and pixel active counters */
329 struct di_sync_config cfg_vga[] = {
330 {
331 /* 1: INT_HSYNC */
332 .run_count = h_total - 1,
333 .run_src = DI_SYNC_CLK,
334 } , {
335 /* 2: VSYNC */
336 .run_count = v_total - 1,
337 .run_src = DI_SYNC_INT_HSYNC,
338 } , {
339 /* 3: Line Active */
340 .run_src = DI_SYNC_INT_HSYNC,
341 .offset_count = sig->mode.vsync_len +
342 sig->mode.vback_porch,
343 .offset_src = DI_SYNC_INT_HSYNC,
344 .repeat_count = sig->mode.vactive,
345 .cnt_clr_src = 3 /* VSYNC */,
346 } , {
347 /* PIN4: HSYNC for VGA via TVEv2 on TQ MBa53 */
348 .run_count = h_total - 1,
349 .run_src = DI_SYNC_CLK,
350 .offset_count = div * sig->v_to_h_sync + 18, /* magic value from Freescale TVE driver */
351 .offset_src = DI_SYNC_CLK,
352 .cnt_polarity_gen_en = 1,
353 .cnt_polarity_trigger_src = DI_SYNC_CLK,
354 .cnt_down = sig->mode.hsync_len * 2,
355 } , {
356 /* 5: Pixel Active signal to DC */
357 .run_src = DI_SYNC_CLK,
358 .offset_count = sig->mode.hsync_len +
359 sig->mode.hback_porch,
360 .offset_src = DI_SYNC_CLK,
361 .repeat_count = sig->mode.hactive,
362 .cnt_clr_src = 4, /* Line Active */
363 } , {
364 /* PIN6: VSYNC for VGA via TVEv2 on TQ MBa53 */
365 .run_count = v_total - 1,
366 .run_src = DI_SYNC_INT_HSYNC,
367 .offset_count = 1, /* magic value from Freescale TVE driver */
368 .offset_src = DI_SYNC_INT_HSYNC,
369 .cnt_polarity_gen_en = 1,
370 .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
371 .cnt_down = sig->mode.vsync_len * 2,
372 } , {
373 /* PIN4: HSYNC for VGA via TVEv2 on i.MX53-QSB */
374 .run_count = h_total - 1,
375 .run_src = DI_SYNC_CLK,
376 .offset_count = div * sig->v_to_h_sync + 18, /* magic value from Freescale TVE driver */
377 .offset_src = DI_SYNC_CLK,
378 .cnt_polarity_gen_en = 1,
379 .cnt_polarity_trigger_src = DI_SYNC_CLK,
380 .cnt_down = sig->mode.hsync_len * 2,
381 } , {
382 /* PIN6: VSYNC for VGA via TVEv2 on i.MX53-QSB */
383 .run_count = v_total - 1,
384 .run_src = DI_SYNC_INT_HSYNC,
385 .offset_count = 1, /* magic value from Freescale TVE driver */
386 .offset_src = DI_SYNC_INT_HSYNC,
387 .cnt_polarity_gen_en = 1,
388 .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
389 .cnt_down = sig->mode.vsync_len * 2,
390 } , {
391 /* unused */
392 },
393 };
394
395 ipu_di_write(di, v_total - 1, DI_SCR_CONF);
396 if (sig->hsync_pin == 2 && sig->vsync_pin == 3)
397 ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg));
398 else
399 ipu_di_sync_config(di, cfg_vga, 0, ARRAY_SIZE(cfg_vga));
400}
401
402static void ipu_di_config_clock(struct ipu_di *di,
403 const struct ipu_di_signal_cfg *sig)
404{
405 struct clk *clk;
406 unsigned clkgen0;
407 uint32_t val;
408
409 if (sig->clkflags & IPU_DI_CLKMODE_EXT) {
410 /*
411 * CLKMODE_EXT means we must use the DI clock: this is
412 * needed for things like LVDS which needs to feed the
413 * DI and LDB with the same pixel clock.
414 */
415 clk = di->clk_di;
416
417 if (sig->clkflags & IPU_DI_CLKMODE_SYNC) {
418 /*
419 * CLKMODE_SYNC means that we want the DI to be
420 * clocked at the same rate as the parent clock.
421 * This is needed (eg) for LDB which needs to be
422 * fed with the same pixel clock. We assume that
423 * the LDB clock has already been set correctly.
424 */
425 clkgen0 = 1 << 4;
426 } else {
427 /*
428 * We can use the divider. We should really have
429 * a flag here indicating whether the bridge can
430 * cope with a fractional divider or not. For the
431 * time being, let's go for simplicitly and
432 * reliability.
433 */
434 unsigned long in_rate;
435 unsigned div;
436
437 clk_set_rate(clk, sig->mode.pixelclock);
438
439 in_rate = clk_get_rate(clk);
440 div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock);
441 div = clamp(div, 1U, 255U);
442
443 clkgen0 = div << 4;
444 }
445 } else {
446 /*
447 * For other interfaces, we can arbitarily select between
448 * the DI specific clock and the internal IPU clock. See
449 * DI_GENERAL bit 20. We select the IPU clock if it can
450 * give us a clock rate within 1% of the requested frequency,
451 * otherwise we use the DI clock.
452 */
453 unsigned long rate, clkrate;
454 unsigned div, error;
455
456 clkrate = clk_get_rate(di->clk_ipu);
457 div = DIV_ROUND_CLOSEST(clkrate, sig->mode.pixelclock);
458 div = clamp(div, 1U, 255U);
459 rate = clkrate / div;
460
461 error = rate / (sig->mode.pixelclock / 1000);
462
463 dev_dbg(di->ipu->dev, " IPU clock can give %lu with divider %u, error %d.%u%%\n",
464 rate, div, (signed)(error - 1000) / 10, error % 10);
465
466 /* Allow a 1% error */
467 if (error < 1010 && error >= 990) {
468 clk = di->clk_ipu;
469
470 clkgen0 = div << 4;
471 } else {
472 unsigned long in_rate;
473 unsigned div;
474
475 clk = di->clk_di;
476
477 clk_set_rate(clk, sig->mode.pixelclock);
478
479 in_rate = clk_get_rate(clk);
480 div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock);
481 div = clamp(div, 1U, 255U);
482
483 clkgen0 = div << 4;
484 }
485 }
486
487 di->clk_di_pixel = clk;
488
489 /* Set the divider */
490 ipu_di_write(di, clkgen0, DI_BS_CLKGEN0);
491
492 /*
493 * Set the high/low periods. Bits 24:16 give us the falling edge,
494 * and bits 8:0 give the rising edge. LSB is fraction, and is
495 * based on the divider above. We want a 50% duty cycle, so set
496 * the falling edge to be half the divider.
497 */
498 ipu_di_write(di, (clkgen0 >> 4) << 16, DI_BS_CLKGEN1);
499
500 /* Finally select the input clock */
501 val = ipu_di_read(di, DI_GENERAL) & ~DI_GEN_DI_CLK_EXT;
502 if (clk == di->clk_di)
503 val |= DI_GEN_DI_CLK_EXT;
504 ipu_di_write(di, val, DI_GENERAL);
505
506 dev_dbg(di->ipu->dev, "Want %luHz IPU %luHz DI %luHz using %s, %luHz\n",
507 sig->mode.pixelclock,
508 clk_get_rate(di->clk_ipu),
509 clk_get_rate(di->clk_di),
510 clk == di->clk_di ? "DI" : "IPU",
511 clk_get_rate(di->clk_di_pixel) / (clkgen0 >> 4));
512}
513
514/*
515 * This function is called to adjust a video mode to IPU restrictions.
516 * It is meant to be called from drm crtc mode_fixup() methods.
517 */
518int ipu_di_adjust_videomode(struct ipu_di *di, struct videomode *mode)
519{
520 u32 diff;
521
522 if (mode->vfront_porch >= 2)
523 return 0;
524
525 diff = 2 - mode->vfront_porch;
526
527 if (mode->vback_porch >= diff) {
528 mode->vfront_porch = 2;
529 mode->vback_porch -= diff;
530 } else if (mode->vsync_len > diff) {
531 mode->vfront_porch = 2;
532 mode->vsync_len = mode->vsync_len - diff;
533 } else {
534 dev_warn(di->ipu->dev, "failed to adjust videomode\n");
535 return -EINVAL;
536 }
537
538 dev_dbg(di->ipu->dev, "videomode adapted for IPU restrictions\n");
539 return 0;
540}
541EXPORT_SYMBOL_GPL(ipu_di_adjust_videomode);
542
543static u32 ipu_di_gen_polarity(int pin)
544{
545 switch (pin) {
546 case 1:
547 return DI_GEN_POLARITY_1;
548 case 2:
549 return DI_GEN_POLARITY_2;
550 case 3:
551 return DI_GEN_POLARITY_3;
552 case 4:
553 return DI_GEN_POLARITY_4;
554 case 5:
555 return DI_GEN_POLARITY_5;
556 case 6:
557 return DI_GEN_POLARITY_6;
558 case 7:
559 return DI_GEN_POLARITY_7;
560 case 8:
561 return DI_GEN_POLARITY_8;
562 }
563 return 0;
564}
565
566int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
567{
568 u32 reg;
569 u32 di_gen, vsync_cnt;
570 u32 div;
571
572 dev_dbg(di->ipu->dev, "disp %d: panel size = %d x %d\n",
573 di->id, sig->mode.hactive, sig->mode.vactive);
574
575 dev_dbg(di->ipu->dev, "Clocks: IPU %luHz DI %luHz Needed %luHz\n",
576 clk_get_rate(di->clk_ipu),
577 clk_get_rate(di->clk_di),
578 sig->mode.pixelclock);
579
580 mutex_lock(&di_mutex);
581
582 ipu_di_config_clock(di, sig);
583
584 div = ipu_di_read(di, DI_BS_CLKGEN0) & 0xfff;
585 div = div / 16; /* Now divider is integer portion */
586
587 /* Setup pixel clock timing */
588 /* Down time is half of period */
589 ipu_di_write(di, (div << 16), DI_BS_CLKGEN1);
590
591 ipu_di_data_wave_config(di, SYNC_WAVE, div - 1, div - 1);
592 ipu_di_data_pin_config(di, SYNC_WAVE, DI_PIN15, 3, 0, div * 2);
593
594 di_gen = ipu_di_read(di, DI_GENERAL) & DI_GEN_DI_CLK_EXT;
595 di_gen |= DI_GEN_DI_VSYNC_EXT;
596
597 if (sig->mode.flags & DISPLAY_FLAGS_INTERLACED) {
598 ipu_di_sync_config_interlaced(di, sig);
599
600 /* set y_sel = 1 */
601 di_gen |= 0x10000000;
602
603 vsync_cnt = 3;
604 } else {
605 ipu_di_sync_config_noninterlaced(di, sig, div);
606
607 vsync_cnt = 3;
608 if (di->id == 1)
609 /*
610 * TODO: change only for TVEv2, parallel display
611 * uses pin 2 / 3
612 */
613 if (!(sig->hsync_pin == 2 && sig->vsync_pin == 3))
614 vsync_cnt = 6;
615 }
616
617 if (sig->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH)
618 di_gen |= ipu_di_gen_polarity(sig->hsync_pin);
619 if (sig->mode.flags & DISPLAY_FLAGS_VSYNC_HIGH)
620 di_gen |= ipu_di_gen_polarity(sig->vsync_pin);
621
622 if (sig->clk_pol)
623 di_gen |= DI_GEN_POLARITY_DISP_CLK;
624
625 ipu_di_write(di, di_gen, DI_GENERAL);
626
627 ipu_di_write(di, (--vsync_cnt << DI_VSYNC_SEL_OFFSET) | 0x00000002,
628 DI_SYNC_AS_GEN);
629
630 reg = ipu_di_read(di, DI_POL);
631 reg &= ~(DI_POL_DRDY_DATA_POLARITY | DI_POL_DRDY_POLARITY_15);
632
633 if (sig->enable_pol)
634 reg |= DI_POL_DRDY_POLARITY_15;
635 if (sig->data_pol)
636 reg |= DI_POL_DRDY_DATA_POLARITY;
637
638 ipu_di_write(di, reg, DI_POL);
639
640 mutex_unlock(&di_mutex);
641
642 return 0;
643}
644EXPORT_SYMBOL_GPL(ipu_di_init_sync_panel);
645
646int ipu_di_enable(struct ipu_di *di)
647{
648 int ret;
649
650 WARN_ON(IS_ERR(di->clk_di_pixel));
651
652 ret = clk_prepare_enable(di->clk_di_pixel);
653 if (ret)
654 return ret;
655
656 ipu_module_enable(di->ipu, di->module);
657
658 return 0;
659}
660EXPORT_SYMBOL_GPL(ipu_di_enable);
661
662int ipu_di_disable(struct ipu_di *di)
663{
664 WARN_ON(IS_ERR(di->clk_di_pixel));
665
666 ipu_module_disable(di->ipu, di->module);
667
668 clk_disable_unprepare(di->clk_di_pixel);
669
670 return 0;
671}
672EXPORT_SYMBOL_GPL(ipu_di_disable);
673
674int ipu_di_get_num(struct ipu_di *di)
675{
676 return di->id;
677}
678EXPORT_SYMBOL_GPL(ipu_di_get_num);
679
680static DEFINE_MUTEX(ipu_di_lock);
681
682struct ipu_di *ipu_di_get(struct ipu_soc *ipu, int disp)
683{
684 struct ipu_di *di;
685
686 if (disp > 1)
687 return ERR_PTR(-EINVAL);
688
689 di = ipu->di_priv[disp];
690
691 mutex_lock(&ipu_di_lock);
692
693 if (di->inuse) {
694 di = ERR_PTR(-EBUSY);
695 goto out;
696 }
697
698 di->inuse = true;
699out:
700 mutex_unlock(&ipu_di_lock);
701
702 return di;
703}
704EXPORT_SYMBOL_GPL(ipu_di_get);
705
706void ipu_di_put(struct ipu_di *di)
707{
708 mutex_lock(&ipu_di_lock);
709
710 di->inuse = false;
711
712 mutex_unlock(&ipu_di_lock);
713}
714EXPORT_SYMBOL_GPL(ipu_di_put);
715
716int ipu_di_init(struct ipu_soc *ipu, struct device *dev, int id,
717 unsigned long base,
718 u32 module, struct clk *clk_ipu)
719{
720 struct ipu_di *di;
721
722 if (id > 1)
723 return -ENODEV;
724
725 di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
726 if (!di)
727 return -ENOMEM;
728
729 ipu->di_priv[id] = di;
730
731 di->clk_di = devm_clk_get(dev, id ? "di1" : "di0");
732 if (IS_ERR(di->clk_di))
733 return PTR_ERR(di->clk_di);
734
735 di->module = module;
736 di->id = id;
737 di->clk_ipu = clk_ipu;
738 di->base = devm_ioremap(dev, base, PAGE_SIZE);
739 if (!di->base)
740 return -ENOMEM;
741
742 ipu_di_write(di, 0x10, DI_BS_CLKGEN0);
743
744 dev_dbg(dev, "DI%d base: 0x%08lx remapped to %p\n",
745 id, base, di->base);
746 di->inuse = false;
747 di->ipu = ipu;
748
749 return 0;
750}
751
752void ipu_di_exit(struct ipu_soc *ipu, int id)
753{
754}