Loading...
1/*
2 * DMM IOMMU driver support functions for TI OMAP processors.
3 *
4 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
5 * Author: Rob Clark <rob@ti.com>
6 * Andy Gross <andy.gross@ti.com>
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation version 2.
11 *
12 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
13 * kind, whether express or implied; without even the implied warranty
14 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 */
17
18#include <linux/completion.h>
19#include <linux/delay.h>
20#include <linux/dma-mapping.h>
21#include <linux/dmaengine.h>
22#include <linux/errno.h>
23#include <linux/init.h>
24#include <linux/interrupt.h>
25#include <linux/list.h>
26#include <linux/mm.h>
27#include <linux/module.h>
28#include <linux/platform_device.h> /* platform_device() */
29#include <linux/sched.h>
30#include <linux/seq_file.h>
31#include <linux/slab.h>
32#include <linux/time.h>
33#include <linux/vmalloc.h>
34#include <linux/wait.h>
35
36#include "omap_dmm_tiler.h"
37#include "omap_dmm_priv.h"
38
39#define DMM_DRIVER_NAME "dmm"
40
41/* mappings for associating views to luts */
42static struct tcm *containers[TILFMT_NFORMATS];
43static struct dmm *omap_dmm;
44
45#if defined(CONFIG_OF)
46static const struct of_device_id dmm_of_match[];
47#endif
48
49/* global spinlock for protecting lists */
50static DEFINE_SPINLOCK(list_lock);
51
52/* Geometry table */
53#define GEOM(xshift, yshift, bytes_per_pixel) { \
54 .x_shft = (xshift), \
55 .y_shft = (yshift), \
56 .cpp = (bytes_per_pixel), \
57 .slot_w = 1 << (SLOT_WIDTH_BITS - (xshift)), \
58 .slot_h = 1 << (SLOT_HEIGHT_BITS - (yshift)), \
59 }
60
61static const struct {
62 u32 x_shft; /* unused X-bits (as part of bpp) */
63 u32 y_shft; /* unused Y-bits (as part of bpp) */
64 u32 cpp; /* bytes/chars per pixel */
65 u32 slot_w; /* width of each slot (in pixels) */
66 u32 slot_h; /* height of each slot (in pixels) */
67} geom[TILFMT_NFORMATS] = {
68 [TILFMT_8BIT] = GEOM(0, 0, 1),
69 [TILFMT_16BIT] = GEOM(0, 1, 2),
70 [TILFMT_32BIT] = GEOM(1, 1, 4),
71 [TILFMT_PAGE] = GEOM(SLOT_WIDTH_BITS, SLOT_HEIGHT_BITS, 1),
72};
73
74
75/* lookup table for registers w/ per-engine instances */
76static const u32 reg[][4] = {
77 [PAT_STATUS] = {DMM_PAT_STATUS__0, DMM_PAT_STATUS__1,
78 DMM_PAT_STATUS__2, DMM_PAT_STATUS__3},
79 [PAT_DESCR] = {DMM_PAT_DESCR__0, DMM_PAT_DESCR__1,
80 DMM_PAT_DESCR__2, DMM_PAT_DESCR__3},
81};
82
83static int dmm_dma_copy(struct dmm *dmm, dma_addr_t src, dma_addr_t dst)
84{
85 struct dma_device *dma_dev = dmm->wa_dma_chan->device;
86 struct dma_async_tx_descriptor *tx;
87 enum dma_status status;
88 dma_cookie_t cookie;
89
90 tx = dma_dev->device_prep_dma_memcpy(dmm->wa_dma_chan, dst, src, 4, 0);
91 if (!tx) {
92 dev_err(dmm->dev, "Failed to prepare DMA memcpy\n");
93 return -EIO;
94 }
95
96 cookie = tx->tx_submit(tx);
97 if (dma_submit_error(cookie)) {
98 dev_err(dmm->dev, "Failed to do DMA tx_submit\n");
99 return -EIO;
100 }
101
102 dma_async_issue_pending(dmm->wa_dma_chan);
103 status = dma_sync_wait(dmm->wa_dma_chan, cookie);
104 if (status != DMA_COMPLETE)
105 dev_err(dmm->dev, "i878 wa DMA copy failure\n");
106
107 dmaengine_terminate_all(dmm->wa_dma_chan);
108 return 0;
109}
110
111static u32 dmm_read_wa(struct dmm *dmm, u32 reg)
112{
113 dma_addr_t src, dst;
114 int r;
115
116 src = dmm->phys_base + reg;
117 dst = dmm->wa_dma_handle;
118
119 r = dmm_dma_copy(dmm, src, dst);
120 if (r) {
121 dev_err(dmm->dev, "sDMA read transfer timeout\n");
122 return readl(dmm->base + reg);
123 }
124
125 /*
126 * As per i878 workaround, the DMA is used to access the DMM registers.
127 * Make sure that the readl is not moved by the compiler or the CPU
128 * earlier than the DMA finished writing the value to memory.
129 */
130 rmb();
131 return readl(dmm->wa_dma_data);
132}
133
134static void dmm_write_wa(struct dmm *dmm, u32 val, u32 reg)
135{
136 dma_addr_t src, dst;
137 int r;
138
139 writel(val, dmm->wa_dma_data);
140 /*
141 * As per i878 workaround, the DMA is used to access the DMM registers.
142 * Make sure that the writel is not moved by the compiler or the CPU, so
143 * the data will be in place before we start the DMA to do the actual
144 * register write.
145 */
146 wmb();
147
148 src = dmm->wa_dma_handle;
149 dst = dmm->phys_base + reg;
150
151 r = dmm_dma_copy(dmm, src, dst);
152 if (r) {
153 dev_err(dmm->dev, "sDMA write transfer timeout\n");
154 writel(val, dmm->base + reg);
155 }
156}
157
158static u32 dmm_read(struct dmm *dmm, u32 reg)
159{
160 if (dmm->dmm_workaround) {
161 u32 v;
162 unsigned long flags;
163
164 spin_lock_irqsave(&dmm->wa_lock, flags);
165 v = dmm_read_wa(dmm, reg);
166 spin_unlock_irqrestore(&dmm->wa_lock, flags);
167
168 return v;
169 } else {
170 return readl(dmm->base + reg);
171 }
172}
173
174static void dmm_write(struct dmm *dmm, u32 val, u32 reg)
175{
176 if (dmm->dmm_workaround) {
177 unsigned long flags;
178
179 spin_lock_irqsave(&dmm->wa_lock, flags);
180 dmm_write_wa(dmm, val, reg);
181 spin_unlock_irqrestore(&dmm->wa_lock, flags);
182 } else {
183 writel(val, dmm->base + reg);
184 }
185}
186
187static int dmm_workaround_init(struct dmm *dmm)
188{
189 dma_cap_mask_t mask;
190
191 spin_lock_init(&dmm->wa_lock);
192
193 dmm->wa_dma_data = dma_alloc_coherent(dmm->dev, sizeof(u32),
194 &dmm->wa_dma_handle, GFP_KERNEL);
195 if (!dmm->wa_dma_data)
196 return -ENOMEM;
197
198 dma_cap_zero(mask);
199 dma_cap_set(DMA_MEMCPY, mask);
200
201 dmm->wa_dma_chan = dma_request_channel(mask, NULL, NULL);
202 if (!dmm->wa_dma_chan) {
203 dma_free_coherent(dmm->dev, 4, dmm->wa_dma_data, dmm->wa_dma_handle);
204 return -ENODEV;
205 }
206
207 return 0;
208}
209
210static void dmm_workaround_uninit(struct dmm *dmm)
211{
212 dma_release_channel(dmm->wa_dma_chan);
213
214 dma_free_coherent(dmm->dev, 4, dmm->wa_dma_data, dmm->wa_dma_handle);
215}
216
217/* simple allocator to grab next 16 byte aligned memory from txn */
218static void *alloc_dma(struct dmm_txn *txn, size_t sz, dma_addr_t *pa)
219{
220 void *ptr;
221 struct refill_engine *engine = txn->engine_handle;
222
223 /* dmm programming requires 16 byte aligned addresses */
224 txn->current_pa = round_up(txn->current_pa, 16);
225 txn->current_va = (void *)round_up((long)txn->current_va, 16);
226
227 ptr = txn->current_va;
228 *pa = txn->current_pa;
229
230 txn->current_pa += sz;
231 txn->current_va += sz;
232
233 BUG_ON((txn->current_va - engine->refill_va) > REFILL_BUFFER_SIZE);
234
235 return ptr;
236}
237
238/* check status and spin until wait_mask comes true */
239static int wait_status(struct refill_engine *engine, u32 wait_mask)
240{
241 struct dmm *dmm = engine->dmm;
242 u32 r = 0, err, i;
243
244 i = DMM_FIXED_RETRY_COUNT;
245 while (true) {
246 r = dmm_read(dmm, reg[PAT_STATUS][engine->id]);
247 err = r & DMM_PATSTATUS_ERR;
248 if (err) {
249 dev_err(dmm->dev,
250 "%s: error (engine%d). PAT_STATUS: 0x%08x\n",
251 __func__, engine->id, r);
252 return -EFAULT;
253 }
254
255 if ((r & wait_mask) == wait_mask)
256 break;
257
258 if (--i == 0) {
259 dev_err(dmm->dev,
260 "%s: timeout (engine%d). PAT_STATUS: 0x%08x\n",
261 __func__, engine->id, r);
262 return -ETIMEDOUT;
263 }
264
265 udelay(1);
266 }
267
268 return 0;
269}
270
271static void release_engine(struct refill_engine *engine)
272{
273 unsigned long flags;
274
275 spin_lock_irqsave(&list_lock, flags);
276 list_add(&engine->idle_node, &omap_dmm->idle_head);
277 spin_unlock_irqrestore(&list_lock, flags);
278
279 atomic_inc(&omap_dmm->engine_counter);
280 wake_up_interruptible(&omap_dmm->engine_queue);
281}
282
283static irqreturn_t omap_dmm_irq_handler(int irq, void *arg)
284{
285 struct dmm *dmm = arg;
286 u32 status = dmm_read(dmm, DMM_PAT_IRQSTATUS);
287 int i;
288
289 /* ack IRQ */
290 dmm_write(dmm, status, DMM_PAT_IRQSTATUS);
291
292 for (i = 0; i < dmm->num_engines; i++) {
293 if (status & DMM_IRQSTAT_ERR_MASK)
294 dev_err(dmm->dev,
295 "irq error(engine%d): IRQSTAT 0x%02x\n",
296 i, status & 0xff);
297
298 if (status & DMM_IRQSTAT_LST) {
299 if (dmm->engines[i].async)
300 release_engine(&dmm->engines[i]);
301
302 complete(&dmm->engines[i].compl);
303 }
304
305 status >>= 8;
306 }
307
308 return IRQ_HANDLED;
309}
310
311/**
312 * Get a handle for a DMM transaction
313 */
314static struct dmm_txn *dmm_txn_init(struct dmm *dmm, struct tcm *tcm)
315{
316 struct dmm_txn *txn = NULL;
317 struct refill_engine *engine = NULL;
318 int ret;
319 unsigned long flags;
320
321
322 /* wait until an engine is available */
323 ret = wait_event_interruptible(omap_dmm->engine_queue,
324 atomic_add_unless(&omap_dmm->engine_counter, -1, 0));
325 if (ret)
326 return ERR_PTR(ret);
327
328 /* grab an idle engine */
329 spin_lock_irqsave(&list_lock, flags);
330 if (!list_empty(&dmm->idle_head)) {
331 engine = list_entry(dmm->idle_head.next, struct refill_engine,
332 idle_node);
333 list_del(&engine->idle_node);
334 }
335 spin_unlock_irqrestore(&list_lock, flags);
336
337 BUG_ON(!engine);
338
339 txn = &engine->txn;
340 engine->tcm = tcm;
341 txn->engine_handle = engine;
342 txn->last_pat = NULL;
343 txn->current_va = engine->refill_va;
344 txn->current_pa = engine->refill_pa;
345
346 return txn;
347}
348
349/**
350 * Add region to DMM transaction. If pages or pages[i] is NULL, then the
351 * corresponding slot is cleared (ie. dummy_pa is programmed)
352 */
353static void dmm_txn_append(struct dmm_txn *txn, struct pat_area *area,
354 struct page **pages, u32 npages, u32 roll)
355{
356 dma_addr_t pat_pa = 0, data_pa = 0;
357 u32 *data;
358 struct pat *pat;
359 struct refill_engine *engine = txn->engine_handle;
360 int columns = (1 + area->x1 - area->x0);
361 int rows = (1 + area->y1 - area->y0);
362 int i = columns*rows;
363
364 pat = alloc_dma(txn, sizeof(*pat), &pat_pa);
365
366 if (txn->last_pat)
367 txn->last_pat->next_pa = (u32)pat_pa;
368
369 pat->area = *area;
370
371 /* adjust Y coordinates based off of container parameters */
372 pat->area.y0 += engine->tcm->y_offset;
373 pat->area.y1 += engine->tcm->y_offset;
374
375 pat->ctrl = (struct pat_ctrl){
376 .start = 1,
377 .lut_id = engine->tcm->lut_id,
378 };
379
380 data = alloc_dma(txn, 4*i, &data_pa);
381 /* FIXME: what if data_pa is more than 32-bit ? */
382 pat->data_pa = data_pa;
383
384 while (i--) {
385 int n = i + roll;
386 if (n >= npages)
387 n -= npages;
388 data[i] = (pages && pages[n]) ?
389 page_to_phys(pages[n]) : engine->dmm->dummy_pa;
390 }
391
392 txn->last_pat = pat;
393
394 return;
395}
396
397/**
398 * Commit the DMM transaction.
399 */
400static int dmm_txn_commit(struct dmm_txn *txn, bool wait)
401{
402 int ret = 0;
403 struct refill_engine *engine = txn->engine_handle;
404 struct dmm *dmm = engine->dmm;
405
406 if (!txn->last_pat) {
407 dev_err(engine->dmm->dev, "need at least one txn\n");
408 ret = -EINVAL;
409 goto cleanup;
410 }
411
412 txn->last_pat->next_pa = 0;
413 /* ensure that the written descriptors are visible to DMM */
414 wmb();
415
416 /*
417 * NOTE: the wmb() above should be enough, but there seems to be a bug
418 * in OMAP's memory barrier implementation, which in some rare cases may
419 * cause the writes not to be observable after wmb().
420 */
421
422 /* read back to ensure the data is in RAM */
423 readl(&txn->last_pat->next_pa);
424
425 /* write to PAT_DESCR to clear out any pending transaction */
426 dmm_write(dmm, 0x0, reg[PAT_DESCR][engine->id]);
427
428 /* wait for engine ready: */
429 ret = wait_status(engine, DMM_PATSTATUS_READY);
430 if (ret) {
431 ret = -EFAULT;
432 goto cleanup;
433 }
434
435 /* mark whether it is async to denote list management in IRQ handler */
436 engine->async = wait ? false : true;
437 reinit_completion(&engine->compl);
438 /* verify that the irq handler sees the 'async' and completion value */
439 smp_mb();
440
441 /* kick reload */
442 dmm_write(dmm, engine->refill_pa, reg[PAT_DESCR][engine->id]);
443
444 if (wait) {
445 if (!wait_for_completion_timeout(&engine->compl,
446 msecs_to_jiffies(100))) {
447 dev_err(dmm->dev, "timed out waiting for done\n");
448 ret = -ETIMEDOUT;
449 goto cleanup;
450 }
451
452 /* Check the engine status before continue */
453 ret = wait_status(engine, DMM_PATSTATUS_READY |
454 DMM_PATSTATUS_VALID | DMM_PATSTATUS_DONE);
455 }
456
457cleanup:
458 /* only place engine back on list if we are done with it */
459 if (ret || wait)
460 release_engine(engine);
461
462 return ret;
463}
464
465/*
466 * DMM programming
467 */
468static int fill(struct tcm_area *area, struct page **pages,
469 u32 npages, u32 roll, bool wait)
470{
471 int ret = 0;
472 struct tcm_area slice, area_s;
473 struct dmm_txn *txn;
474
475 /*
476 * FIXME
477 *
478 * Asynchronous fill does not work reliably, as the driver does not
479 * handle errors in the async code paths. The fill operation may
480 * silently fail, leading to leaking DMM engines, which may eventually
481 * lead to deadlock if we run out of DMM engines.
482 *
483 * For now, always set 'wait' so that we only use sync fills. Async
484 * fills should be fixed, or alternatively we could decide to only
485 * support sync fills and so the whole async code path could be removed.
486 */
487
488 wait = true;
489
490 txn = dmm_txn_init(omap_dmm, area->tcm);
491 if (IS_ERR_OR_NULL(txn))
492 return -ENOMEM;
493
494 tcm_for_each_slice(slice, *area, area_s) {
495 struct pat_area p_area = {
496 .x0 = slice.p0.x, .y0 = slice.p0.y,
497 .x1 = slice.p1.x, .y1 = slice.p1.y,
498 };
499
500 dmm_txn_append(txn, &p_area, pages, npages, roll);
501
502 roll += tcm_sizeof(slice);
503 }
504
505 ret = dmm_txn_commit(txn, wait);
506
507 return ret;
508}
509
510/*
511 * Pin/unpin
512 */
513
514/* note: slots for which pages[i] == NULL are filled w/ dummy page
515 */
516int tiler_pin(struct tiler_block *block, struct page **pages,
517 u32 npages, u32 roll, bool wait)
518{
519 int ret;
520
521 ret = fill(&block->area, pages, npages, roll, wait);
522
523 if (ret)
524 tiler_unpin(block);
525
526 return ret;
527}
528
529int tiler_unpin(struct tiler_block *block)
530{
531 return fill(&block->area, NULL, 0, 0, false);
532}
533
534/*
535 * Reserve/release
536 */
537struct tiler_block *tiler_reserve_2d(enum tiler_fmt fmt, u16 w,
538 u16 h, u16 align)
539{
540 struct tiler_block *block;
541 u32 min_align = 128;
542 int ret;
543 unsigned long flags;
544 u32 slot_bytes;
545
546 block = kzalloc(sizeof(*block), GFP_KERNEL);
547 if (!block)
548 return ERR_PTR(-ENOMEM);
549
550 BUG_ON(!validfmt(fmt));
551
552 /* convert width/height to slots */
553 w = DIV_ROUND_UP(w, geom[fmt].slot_w);
554 h = DIV_ROUND_UP(h, geom[fmt].slot_h);
555
556 /* convert alignment to slots */
557 slot_bytes = geom[fmt].slot_w * geom[fmt].cpp;
558 min_align = max(min_align, slot_bytes);
559 align = (align > min_align) ? ALIGN(align, min_align) : min_align;
560 align /= slot_bytes;
561
562 block->fmt = fmt;
563
564 ret = tcm_reserve_2d(containers[fmt], w, h, align, -1, slot_bytes,
565 &block->area);
566 if (ret) {
567 kfree(block);
568 return ERR_PTR(-ENOMEM);
569 }
570
571 /* add to allocation list */
572 spin_lock_irqsave(&list_lock, flags);
573 list_add(&block->alloc_node, &omap_dmm->alloc_head);
574 spin_unlock_irqrestore(&list_lock, flags);
575
576 return block;
577}
578
579struct tiler_block *tiler_reserve_1d(size_t size)
580{
581 struct tiler_block *block = kzalloc(sizeof(*block), GFP_KERNEL);
582 int num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
583 unsigned long flags;
584
585 if (!block)
586 return ERR_PTR(-ENOMEM);
587
588 block->fmt = TILFMT_PAGE;
589
590 if (tcm_reserve_1d(containers[TILFMT_PAGE], num_pages,
591 &block->area)) {
592 kfree(block);
593 return ERR_PTR(-ENOMEM);
594 }
595
596 spin_lock_irqsave(&list_lock, flags);
597 list_add(&block->alloc_node, &omap_dmm->alloc_head);
598 spin_unlock_irqrestore(&list_lock, flags);
599
600 return block;
601}
602
603/* note: if you have pin'd pages, you should have already unpin'd first! */
604int tiler_release(struct tiler_block *block)
605{
606 int ret = tcm_free(&block->area);
607 unsigned long flags;
608
609 if (block->area.tcm)
610 dev_err(omap_dmm->dev, "failed to release block\n");
611
612 spin_lock_irqsave(&list_lock, flags);
613 list_del(&block->alloc_node);
614 spin_unlock_irqrestore(&list_lock, flags);
615
616 kfree(block);
617 return ret;
618}
619
620/*
621 * Utils
622 */
623
624/* calculate the tiler space address of a pixel in a view orientation...
625 * below description copied from the display subsystem section of TRM:
626 *
627 * When the TILER is addressed, the bits:
628 * [28:27] = 0x0 for 8-bit tiled
629 * 0x1 for 16-bit tiled
630 * 0x2 for 32-bit tiled
631 * 0x3 for page mode
632 * [31:29] = 0x0 for 0-degree view
633 * 0x1 for 180-degree view + mirroring
634 * 0x2 for 0-degree view + mirroring
635 * 0x3 for 180-degree view
636 * 0x4 for 270-degree view + mirroring
637 * 0x5 for 270-degree view
638 * 0x6 for 90-degree view
639 * 0x7 for 90-degree view + mirroring
640 * Otherwise the bits indicated the corresponding bit address to access
641 * the SDRAM.
642 */
643static u32 tiler_get_address(enum tiler_fmt fmt, u32 orient, u32 x, u32 y)
644{
645 u32 x_bits, y_bits, tmp, x_mask, y_mask, alignment;
646
647 x_bits = CONT_WIDTH_BITS - geom[fmt].x_shft;
648 y_bits = CONT_HEIGHT_BITS - geom[fmt].y_shft;
649 alignment = geom[fmt].x_shft + geom[fmt].y_shft;
650
651 /* validate coordinate */
652 x_mask = MASK(x_bits);
653 y_mask = MASK(y_bits);
654
655 if (x < 0 || x > x_mask || y < 0 || y > y_mask) {
656 DBG("invalid coords: %u < 0 || %u > %u || %u < 0 || %u > %u",
657 x, x, x_mask, y, y, y_mask);
658 return 0;
659 }
660
661 /* account for mirroring */
662 if (orient & MASK_X_INVERT)
663 x ^= x_mask;
664 if (orient & MASK_Y_INVERT)
665 y ^= y_mask;
666
667 /* get coordinate address */
668 if (orient & MASK_XY_FLIP)
669 tmp = ((x << y_bits) + y);
670 else
671 tmp = ((y << x_bits) + x);
672
673 return TIL_ADDR((tmp << alignment), orient, fmt);
674}
675
676dma_addr_t tiler_ssptr(struct tiler_block *block)
677{
678 BUG_ON(!validfmt(block->fmt));
679
680 return TILVIEW_8BIT + tiler_get_address(block->fmt, 0,
681 block->area.p0.x * geom[block->fmt].slot_w,
682 block->area.p0.y * geom[block->fmt].slot_h);
683}
684
685dma_addr_t tiler_tsptr(struct tiler_block *block, u32 orient,
686 u32 x, u32 y)
687{
688 struct tcm_pt *p = &block->area.p0;
689 BUG_ON(!validfmt(block->fmt));
690
691 return tiler_get_address(block->fmt, orient,
692 (p->x * geom[block->fmt].slot_w) + x,
693 (p->y * geom[block->fmt].slot_h) + y);
694}
695
696void tiler_align(enum tiler_fmt fmt, u16 *w, u16 *h)
697{
698 BUG_ON(!validfmt(fmt));
699 *w = round_up(*w, geom[fmt].slot_w);
700 *h = round_up(*h, geom[fmt].slot_h);
701}
702
703u32 tiler_stride(enum tiler_fmt fmt, u32 orient)
704{
705 BUG_ON(!validfmt(fmt));
706
707 if (orient & MASK_XY_FLIP)
708 return 1 << (CONT_HEIGHT_BITS + geom[fmt].x_shft);
709 else
710 return 1 << (CONT_WIDTH_BITS + geom[fmt].y_shft);
711}
712
713size_t tiler_size(enum tiler_fmt fmt, u16 w, u16 h)
714{
715 tiler_align(fmt, &w, &h);
716 return geom[fmt].cpp * w * h;
717}
718
719size_t tiler_vsize(enum tiler_fmt fmt, u16 w, u16 h)
720{
721 BUG_ON(!validfmt(fmt));
722 return round_up(geom[fmt].cpp * w, PAGE_SIZE) * h;
723}
724
725u32 tiler_get_cpu_cache_flags(void)
726{
727 return omap_dmm->plat_data->cpu_cache_flags;
728}
729
730bool dmm_is_available(void)
731{
732 return omap_dmm ? true : false;
733}
734
735static int omap_dmm_remove(struct platform_device *dev)
736{
737 struct tiler_block *block, *_block;
738 int i;
739 unsigned long flags;
740
741 if (omap_dmm) {
742 /* Disable all enabled interrupts */
743 dmm_write(omap_dmm, 0x7e7e7e7e, DMM_PAT_IRQENABLE_CLR);
744 free_irq(omap_dmm->irq, omap_dmm);
745
746 /* free all area regions */
747 spin_lock_irqsave(&list_lock, flags);
748 list_for_each_entry_safe(block, _block, &omap_dmm->alloc_head,
749 alloc_node) {
750 list_del(&block->alloc_node);
751 kfree(block);
752 }
753 spin_unlock_irqrestore(&list_lock, flags);
754
755 for (i = 0; i < omap_dmm->num_lut; i++)
756 if (omap_dmm->tcm && omap_dmm->tcm[i])
757 omap_dmm->tcm[i]->deinit(omap_dmm->tcm[i]);
758 kfree(omap_dmm->tcm);
759
760 kfree(omap_dmm->engines);
761 if (omap_dmm->refill_va)
762 dma_free_wc(omap_dmm->dev,
763 REFILL_BUFFER_SIZE * omap_dmm->num_engines,
764 omap_dmm->refill_va, omap_dmm->refill_pa);
765 if (omap_dmm->dummy_page)
766 __free_page(omap_dmm->dummy_page);
767
768 if (omap_dmm->dmm_workaround)
769 dmm_workaround_uninit(omap_dmm);
770
771 iounmap(omap_dmm->base);
772 kfree(omap_dmm);
773 omap_dmm = NULL;
774 }
775
776 return 0;
777}
778
779static int omap_dmm_probe(struct platform_device *dev)
780{
781 int ret = -EFAULT, i;
782 struct tcm_area area = {0};
783 u32 hwinfo, pat_geom;
784 struct resource *mem;
785
786 omap_dmm = kzalloc(sizeof(*omap_dmm), GFP_KERNEL);
787 if (!omap_dmm)
788 goto fail;
789
790 /* initialize lists */
791 INIT_LIST_HEAD(&omap_dmm->alloc_head);
792 INIT_LIST_HEAD(&omap_dmm->idle_head);
793
794 init_waitqueue_head(&omap_dmm->engine_queue);
795
796 if (dev->dev.of_node) {
797 const struct of_device_id *match;
798
799 match = of_match_node(dmm_of_match, dev->dev.of_node);
800 if (!match) {
801 dev_err(&dev->dev, "failed to find matching device node\n");
802 ret = -ENODEV;
803 goto fail;
804 }
805
806 omap_dmm->plat_data = match->data;
807 }
808
809 /* lookup hwmod data - base address and irq */
810 mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
811 if (!mem) {
812 dev_err(&dev->dev, "failed to get base address resource\n");
813 goto fail;
814 }
815
816 omap_dmm->phys_base = mem->start;
817 omap_dmm->base = ioremap(mem->start, SZ_2K);
818
819 if (!omap_dmm->base) {
820 dev_err(&dev->dev, "failed to get dmm base address\n");
821 goto fail;
822 }
823
824 omap_dmm->irq = platform_get_irq(dev, 0);
825 if (omap_dmm->irq < 0) {
826 dev_err(&dev->dev, "failed to get IRQ resource\n");
827 goto fail;
828 }
829
830 omap_dmm->dev = &dev->dev;
831
832 if (of_machine_is_compatible("ti,dra7")) {
833 /*
834 * DRA7 Errata i878 says that MPU should not be used to access
835 * RAM and DMM at the same time. As it's not possible to prevent
836 * MPU accessing RAM, we need to access DMM via a proxy.
837 */
838 if (!dmm_workaround_init(omap_dmm)) {
839 omap_dmm->dmm_workaround = true;
840 dev_info(&dev->dev,
841 "workaround for errata i878 in use\n");
842 } else {
843 dev_warn(&dev->dev,
844 "failed to initialize work-around for i878\n");
845 }
846 }
847
848 hwinfo = dmm_read(omap_dmm, DMM_PAT_HWINFO);
849 omap_dmm->num_engines = (hwinfo >> 24) & 0x1F;
850 omap_dmm->num_lut = (hwinfo >> 16) & 0x1F;
851 omap_dmm->container_width = 256;
852 omap_dmm->container_height = 128;
853
854 atomic_set(&omap_dmm->engine_counter, omap_dmm->num_engines);
855
856 /* read out actual LUT width and height */
857 pat_geom = dmm_read(omap_dmm, DMM_PAT_GEOMETRY);
858 omap_dmm->lut_width = ((pat_geom >> 16) & 0xF) << 5;
859 omap_dmm->lut_height = ((pat_geom >> 24) & 0xF) << 5;
860
861 /* increment LUT by one if on OMAP5 */
862 /* LUT has twice the height, and is split into a separate container */
863 if (omap_dmm->lut_height != omap_dmm->container_height)
864 omap_dmm->num_lut++;
865
866 /* initialize DMM registers */
867 dmm_write(omap_dmm, 0x88888888, DMM_PAT_VIEW__0);
868 dmm_write(omap_dmm, 0x88888888, DMM_PAT_VIEW__1);
869 dmm_write(omap_dmm, 0x80808080, DMM_PAT_VIEW_MAP__0);
870 dmm_write(omap_dmm, 0x80000000, DMM_PAT_VIEW_MAP_BASE);
871 dmm_write(omap_dmm, 0x88888888, DMM_TILER_OR__0);
872 dmm_write(omap_dmm, 0x88888888, DMM_TILER_OR__1);
873
874 omap_dmm->dummy_page = alloc_page(GFP_KERNEL | __GFP_DMA32);
875 if (!omap_dmm->dummy_page) {
876 dev_err(&dev->dev, "could not allocate dummy page\n");
877 ret = -ENOMEM;
878 goto fail;
879 }
880
881 /* set dma mask for device */
882 ret = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
883 if (ret)
884 goto fail;
885
886 omap_dmm->dummy_pa = page_to_phys(omap_dmm->dummy_page);
887
888 /* alloc refill memory */
889 omap_dmm->refill_va = dma_alloc_wc(&dev->dev,
890 REFILL_BUFFER_SIZE * omap_dmm->num_engines,
891 &omap_dmm->refill_pa, GFP_KERNEL);
892 if (!omap_dmm->refill_va) {
893 dev_err(&dev->dev, "could not allocate refill memory\n");
894 goto fail;
895 }
896
897 /* alloc engines */
898 omap_dmm->engines = kcalloc(omap_dmm->num_engines,
899 sizeof(*omap_dmm->engines), GFP_KERNEL);
900 if (!omap_dmm->engines) {
901 ret = -ENOMEM;
902 goto fail;
903 }
904
905 for (i = 0; i < omap_dmm->num_engines; i++) {
906 omap_dmm->engines[i].id = i;
907 omap_dmm->engines[i].dmm = omap_dmm;
908 omap_dmm->engines[i].refill_va = omap_dmm->refill_va +
909 (REFILL_BUFFER_SIZE * i);
910 omap_dmm->engines[i].refill_pa = omap_dmm->refill_pa +
911 (REFILL_BUFFER_SIZE * i);
912 init_completion(&omap_dmm->engines[i].compl);
913
914 list_add(&omap_dmm->engines[i].idle_node, &omap_dmm->idle_head);
915 }
916
917 omap_dmm->tcm = kcalloc(omap_dmm->num_lut, sizeof(*omap_dmm->tcm),
918 GFP_KERNEL);
919 if (!omap_dmm->tcm) {
920 ret = -ENOMEM;
921 goto fail;
922 }
923
924 /* init containers */
925 /* Each LUT is associated with a TCM (container manager). We use the
926 lut_id to denote the lut_id used to identify the correct LUT for
927 programming during reill operations */
928 for (i = 0; i < omap_dmm->num_lut; i++) {
929 omap_dmm->tcm[i] = sita_init(omap_dmm->container_width,
930 omap_dmm->container_height);
931
932 if (!omap_dmm->tcm[i]) {
933 dev_err(&dev->dev, "failed to allocate container\n");
934 ret = -ENOMEM;
935 goto fail;
936 }
937
938 omap_dmm->tcm[i]->lut_id = i;
939 }
940
941 /* assign access mode containers to applicable tcm container */
942 /* OMAP 4 has 1 container for all 4 views */
943 /* OMAP 5 has 2 containers, 1 for 2D and 1 for 1D */
944 containers[TILFMT_8BIT] = omap_dmm->tcm[0];
945 containers[TILFMT_16BIT] = omap_dmm->tcm[0];
946 containers[TILFMT_32BIT] = omap_dmm->tcm[0];
947
948 if (omap_dmm->container_height != omap_dmm->lut_height) {
949 /* second LUT is used for PAGE mode. Programming must use
950 y offset that is added to all y coordinates. LUT id is still
951 0, because it is the same LUT, just the upper 128 lines */
952 containers[TILFMT_PAGE] = omap_dmm->tcm[1];
953 omap_dmm->tcm[1]->y_offset = OMAP5_LUT_OFFSET;
954 omap_dmm->tcm[1]->lut_id = 0;
955 } else {
956 containers[TILFMT_PAGE] = omap_dmm->tcm[0];
957 }
958
959 area = (struct tcm_area) {
960 .tcm = NULL,
961 .p1.x = omap_dmm->container_width - 1,
962 .p1.y = omap_dmm->container_height - 1,
963 };
964
965 ret = request_irq(omap_dmm->irq, omap_dmm_irq_handler, IRQF_SHARED,
966 "omap_dmm_irq_handler", omap_dmm);
967
968 if (ret) {
969 dev_err(&dev->dev, "couldn't register IRQ %d, error %d\n",
970 omap_dmm->irq, ret);
971 omap_dmm->irq = -1;
972 goto fail;
973 }
974
975 /* Enable all interrupts for each refill engine except
976 * ERR_LUT_MISS<n> (which is just advisory, and we don't care
977 * about because we want to be able to refill live scanout
978 * buffers for accelerated pan/scroll) and FILL_DSC<n> which
979 * we just generally don't care about.
980 */
981 dmm_write(omap_dmm, 0x7e7e7e7e, DMM_PAT_IRQENABLE_SET);
982
983 /* initialize all LUTs to dummy page entries */
984 for (i = 0; i < omap_dmm->num_lut; i++) {
985 area.tcm = omap_dmm->tcm[i];
986 if (fill(&area, NULL, 0, 0, true))
987 dev_err(omap_dmm->dev, "refill failed");
988 }
989
990 dev_info(omap_dmm->dev, "initialized all PAT entries\n");
991
992 return 0;
993
994fail:
995 if (omap_dmm_remove(dev))
996 dev_err(&dev->dev, "cleanup failed\n");
997 return ret;
998}
999
1000/*
1001 * debugfs support
1002 */
1003
1004#ifdef CONFIG_DEBUG_FS
1005
1006static const char *alphabet = "abcdefghijklmnopqrstuvwxyz"
1007 "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789";
1008static const char *special = ".,:;'\"`~!^-+";
1009
1010static void fill_map(char **map, int xdiv, int ydiv, struct tcm_area *a,
1011 char c, bool ovw)
1012{
1013 int x, y;
1014 for (y = a->p0.y / ydiv; y <= a->p1.y / ydiv; y++)
1015 for (x = a->p0.x / xdiv; x <= a->p1.x / xdiv; x++)
1016 if (map[y][x] == ' ' || ovw)
1017 map[y][x] = c;
1018}
1019
1020static void fill_map_pt(char **map, int xdiv, int ydiv, struct tcm_pt *p,
1021 char c)
1022{
1023 map[p->y / ydiv][p->x / xdiv] = c;
1024}
1025
1026static char read_map_pt(char **map, int xdiv, int ydiv, struct tcm_pt *p)
1027{
1028 return map[p->y / ydiv][p->x / xdiv];
1029}
1030
1031static int map_width(int xdiv, int x0, int x1)
1032{
1033 return (x1 / xdiv) - (x0 / xdiv) + 1;
1034}
1035
1036static void text_map(char **map, int xdiv, char *nice, int yd, int x0, int x1)
1037{
1038 char *p = map[yd] + (x0 / xdiv);
1039 int w = (map_width(xdiv, x0, x1) - strlen(nice)) / 2;
1040 if (w >= 0) {
1041 p += w;
1042 while (*nice)
1043 *p++ = *nice++;
1044 }
1045}
1046
1047static void map_1d_info(char **map, int xdiv, int ydiv, char *nice,
1048 struct tcm_area *a)
1049{
1050 sprintf(nice, "%dK", tcm_sizeof(*a) * 4);
1051 if (a->p0.y + 1 < a->p1.y) {
1052 text_map(map, xdiv, nice, (a->p0.y + a->p1.y) / 2 / ydiv, 0,
1053 256 - 1);
1054 } else if (a->p0.y < a->p1.y) {
1055 if (strlen(nice) < map_width(xdiv, a->p0.x, 256 - 1))
1056 text_map(map, xdiv, nice, a->p0.y / ydiv,
1057 a->p0.x + xdiv, 256 - 1);
1058 else if (strlen(nice) < map_width(xdiv, 0, a->p1.x))
1059 text_map(map, xdiv, nice, a->p1.y / ydiv,
1060 0, a->p1.y - xdiv);
1061 } else if (strlen(nice) + 1 < map_width(xdiv, a->p0.x, a->p1.x)) {
1062 text_map(map, xdiv, nice, a->p0.y / ydiv, a->p0.x, a->p1.x);
1063 }
1064}
1065
1066static void map_2d_info(char **map, int xdiv, int ydiv, char *nice,
1067 struct tcm_area *a)
1068{
1069 sprintf(nice, "(%d*%d)", tcm_awidth(*a), tcm_aheight(*a));
1070 if (strlen(nice) + 1 < map_width(xdiv, a->p0.x, a->p1.x))
1071 text_map(map, xdiv, nice, (a->p0.y + a->p1.y) / 2 / ydiv,
1072 a->p0.x, a->p1.x);
1073}
1074
1075int tiler_map_show(struct seq_file *s, void *arg)
1076{
1077 int xdiv = 2, ydiv = 1;
1078 char **map = NULL, *global_map;
1079 struct tiler_block *block;
1080 struct tcm_area a, p;
1081 int i;
1082 const char *m2d = alphabet;
1083 const char *a2d = special;
1084 const char *m2dp = m2d, *a2dp = a2d;
1085 char nice[128];
1086 int h_adj;
1087 int w_adj;
1088 unsigned long flags;
1089 int lut_idx;
1090
1091
1092 if (!omap_dmm) {
1093 /* early return if dmm/tiler device is not initialized */
1094 return 0;
1095 }
1096
1097 h_adj = omap_dmm->container_height / ydiv;
1098 w_adj = omap_dmm->container_width / xdiv;
1099
1100 map = kmalloc_array(h_adj, sizeof(*map), GFP_KERNEL);
1101 global_map = kmalloc_array(w_adj + 1, h_adj, GFP_KERNEL);
1102
1103 if (!map || !global_map)
1104 goto error;
1105
1106 for (lut_idx = 0; lut_idx < omap_dmm->num_lut; lut_idx++) {
1107 memset(map, 0, h_adj * sizeof(*map));
1108 memset(global_map, ' ', (w_adj + 1) * h_adj);
1109
1110 for (i = 0; i < omap_dmm->container_height; i++) {
1111 map[i] = global_map + i * (w_adj + 1);
1112 map[i][w_adj] = 0;
1113 }
1114
1115 spin_lock_irqsave(&list_lock, flags);
1116
1117 list_for_each_entry(block, &omap_dmm->alloc_head, alloc_node) {
1118 if (block->area.tcm == omap_dmm->tcm[lut_idx]) {
1119 if (block->fmt != TILFMT_PAGE) {
1120 fill_map(map, xdiv, ydiv, &block->area,
1121 *m2dp, true);
1122 if (!*++a2dp)
1123 a2dp = a2d;
1124 if (!*++m2dp)
1125 m2dp = m2d;
1126 map_2d_info(map, xdiv, ydiv, nice,
1127 &block->area);
1128 } else {
1129 bool start = read_map_pt(map, xdiv,
1130 ydiv, &block->area.p0) == ' ';
1131 bool end = read_map_pt(map, xdiv, ydiv,
1132 &block->area.p1) == ' ';
1133
1134 tcm_for_each_slice(a, block->area, p)
1135 fill_map(map, xdiv, ydiv, &a,
1136 '=', true);
1137 fill_map_pt(map, xdiv, ydiv,
1138 &block->area.p0,
1139 start ? '<' : 'X');
1140 fill_map_pt(map, xdiv, ydiv,
1141 &block->area.p1,
1142 end ? '>' : 'X');
1143 map_1d_info(map, xdiv, ydiv, nice,
1144 &block->area);
1145 }
1146 }
1147 }
1148
1149 spin_unlock_irqrestore(&list_lock, flags);
1150
1151 if (s) {
1152 seq_printf(s, "CONTAINER %d DUMP BEGIN\n", lut_idx);
1153 for (i = 0; i < 128; i++)
1154 seq_printf(s, "%03d:%s\n", i, map[i]);
1155 seq_printf(s, "CONTAINER %d DUMP END\n", lut_idx);
1156 } else {
1157 dev_dbg(omap_dmm->dev, "CONTAINER %d DUMP BEGIN\n",
1158 lut_idx);
1159 for (i = 0; i < 128; i++)
1160 dev_dbg(omap_dmm->dev, "%03d:%s\n", i, map[i]);
1161 dev_dbg(omap_dmm->dev, "CONTAINER %d DUMP END\n",
1162 lut_idx);
1163 }
1164 }
1165
1166error:
1167 kfree(map);
1168 kfree(global_map);
1169
1170 return 0;
1171}
1172#endif
1173
1174#ifdef CONFIG_PM_SLEEP
1175static int omap_dmm_resume(struct device *dev)
1176{
1177 struct tcm_area area;
1178 int i;
1179
1180 if (!omap_dmm)
1181 return -ENODEV;
1182
1183 area = (struct tcm_area) {
1184 .tcm = NULL,
1185 .p1.x = omap_dmm->container_width - 1,
1186 .p1.y = omap_dmm->container_height - 1,
1187 };
1188
1189 /* initialize all LUTs to dummy page entries */
1190 for (i = 0; i < omap_dmm->num_lut; i++) {
1191 area.tcm = omap_dmm->tcm[i];
1192 if (fill(&area, NULL, 0, 0, true))
1193 dev_err(dev, "refill failed");
1194 }
1195
1196 return 0;
1197}
1198#endif
1199
1200static SIMPLE_DEV_PM_OPS(omap_dmm_pm_ops, NULL, omap_dmm_resume);
1201
1202#if defined(CONFIG_OF)
1203static const struct dmm_platform_data dmm_omap4_platform_data = {
1204 .cpu_cache_flags = OMAP_BO_WC,
1205};
1206
1207static const struct dmm_platform_data dmm_omap5_platform_data = {
1208 .cpu_cache_flags = OMAP_BO_UNCACHED,
1209};
1210
1211static const struct of_device_id dmm_of_match[] = {
1212 {
1213 .compatible = "ti,omap4-dmm",
1214 .data = &dmm_omap4_platform_data,
1215 },
1216 {
1217 .compatible = "ti,omap5-dmm",
1218 .data = &dmm_omap5_platform_data,
1219 },
1220 {},
1221};
1222#endif
1223
1224struct platform_driver omap_dmm_driver = {
1225 .probe = omap_dmm_probe,
1226 .remove = omap_dmm_remove,
1227 .driver = {
1228 .owner = THIS_MODULE,
1229 .name = DMM_DRIVER_NAME,
1230 .of_match_table = of_match_ptr(dmm_of_match),
1231 .pm = &omap_dmm_pm_ops,
1232 },
1233};
1234
1235MODULE_LICENSE("GPL v2");
1236MODULE_AUTHOR("Andy Gross <andy.gross@ti.com>");
1237MODULE_DESCRIPTION("OMAP DMM/Tiler Driver");
1/*
2 * DMM IOMMU driver support functions for TI OMAP processors.
3 *
4 * Author: Rob Clark <rob@ti.com>
5 * Andy Gross <andy.gross@ti.com>
6 *
7 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation version 2.
12 *
13 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
14 * kind, whether express or implied; without even the implied warranty
15 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 */
18
19#include <linux/completion.h>
20#include <linux/delay.h>
21#include <linux/dma-mapping.h>
22#include <linux/errno.h>
23#include <linux/init.h>
24#include <linux/interrupt.h>
25#include <linux/list.h>
26#include <linux/mm.h>
27#include <linux/module.h>
28#include <linux/platform_device.h> /* platform_device() */
29#include <linux/sched.h>
30#include <linux/seq_file.h>
31#include <linux/slab.h>
32#include <linux/time.h>
33#include <linux/vmalloc.h>
34#include <linux/wait.h>
35
36#include "omap_dmm_tiler.h"
37#include "omap_dmm_priv.h"
38
39#define DMM_DRIVER_NAME "dmm"
40
41/* mappings for associating views to luts */
42static struct tcm *containers[TILFMT_NFORMATS];
43static struct dmm *omap_dmm;
44
45#if defined(CONFIG_OF)
46static const struct of_device_id dmm_of_match[];
47#endif
48
49/* global spinlock for protecting lists */
50static DEFINE_SPINLOCK(list_lock);
51
52/* Geometry table */
53#define GEOM(xshift, yshift, bytes_per_pixel) { \
54 .x_shft = (xshift), \
55 .y_shft = (yshift), \
56 .cpp = (bytes_per_pixel), \
57 .slot_w = 1 << (SLOT_WIDTH_BITS - (xshift)), \
58 .slot_h = 1 << (SLOT_HEIGHT_BITS - (yshift)), \
59 }
60
61static const struct {
62 uint32_t x_shft; /* unused X-bits (as part of bpp) */
63 uint32_t y_shft; /* unused Y-bits (as part of bpp) */
64 uint32_t cpp; /* bytes/chars per pixel */
65 uint32_t slot_w; /* width of each slot (in pixels) */
66 uint32_t slot_h; /* height of each slot (in pixels) */
67} geom[TILFMT_NFORMATS] = {
68 [TILFMT_8BIT] = GEOM(0, 0, 1),
69 [TILFMT_16BIT] = GEOM(0, 1, 2),
70 [TILFMT_32BIT] = GEOM(1, 1, 4),
71 [TILFMT_PAGE] = GEOM(SLOT_WIDTH_BITS, SLOT_HEIGHT_BITS, 1),
72};
73
74
75/* lookup table for registers w/ per-engine instances */
76static const uint32_t reg[][4] = {
77 [PAT_STATUS] = {DMM_PAT_STATUS__0, DMM_PAT_STATUS__1,
78 DMM_PAT_STATUS__2, DMM_PAT_STATUS__3},
79 [PAT_DESCR] = {DMM_PAT_DESCR__0, DMM_PAT_DESCR__1,
80 DMM_PAT_DESCR__2, DMM_PAT_DESCR__3},
81};
82
83static u32 dmm_read(struct dmm *dmm, u32 reg)
84{
85 return readl(dmm->base + reg);
86}
87
88static void dmm_write(struct dmm *dmm, u32 val, u32 reg)
89{
90 writel(val, dmm->base + reg);
91}
92
93/* simple allocator to grab next 16 byte aligned memory from txn */
94static void *alloc_dma(struct dmm_txn *txn, size_t sz, dma_addr_t *pa)
95{
96 void *ptr;
97 struct refill_engine *engine = txn->engine_handle;
98
99 /* dmm programming requires 16 byte aligned addresses */
100 txn->current_pa = round_up(txn->current_pa, 16);
101 txn->current_va = (void *)round_up((long)txn->current_va, 16);
102
103 ptr = txn->current_va;
104 *pa = txn->current_pa;
105
106 txn->current_pa += sz;
107 txn->current_va += sz;
108
109 BUG_ON((txn->current_va - engine->refill_va) > REFILL_BUFFER_SIZE);
110
111 return ptr;
112}
113
114/* check status and spin until wait_mask comes true */
115static int wait_status(struct refill_engine *engine, uint32_t wait_mask)
116{
117 struct dmm *dmm = engine->dmm;
118 uint32_t r = 0, err, i;
119
120 i = DMM_FIXED_RETRY_COUNT;
121 while (true) {
122 r = dmm_read(dmm, reg[PAT_STATUS][engine->id]);
123 err = r & DMM_PATSTATUS_ERR;
124 if (err)
125 return -EFAULT;
126
127 if ((r & wait_mask) == wait_mask)
128 break;
129
130 if (--i == 0)
131 return -ETIMEDOUT;
132
133 udelay(1);
134 }
135
136 return 0;
137}
138
139static void release_engine(struct refill_engine *engine)
140{
141 unsigned long flags;
142
143 spin_lock_irqsave(&list_lock, flags);
144 list_add(&engine->idle_node, &omap_dmm->idle_head);
145 spin_unlock_irqrestore(&list_lock, flags);
146
147 atomic_inc(&omap_dmm->engine_counter);
148 wake_up_interruptible(&omap_dmm->engine_queue);
149}
150
151static irqreturn_t omap_dmm_irq_handler(int irq, void *arg)
152{
153 struct dmm *dmm = arg;
154 uint32_t status = dmm_read(dmm, DMM_PAT_IRQSTATUS);
155 int i;
156
157 /* ack IRQ */
158 dmm_write(dmm, status, DMM_PAT_IRQSTATUS);
159
160 for (i = 0; i < dmm->num_engines; i++) {
161 if (status & DMM_IRQSTAT_LST) {
162 if (dmm->engines[i].async)
163 release_engine(&dmm->engines[i]);
164
165 complete(&dmm->engines[i].compl);
166 }
167
168 status >>= 8;
169 }
170
171 return IRQ_HANDLED;
172}
173
174/**
175 * Get a handle for a DMM transaction
176 */
177static struct dmm_txn *dmm_txn_init(struct dmm *dmm, struct tcm *tcm)
178{
179 struct dmm_txn *txn = NULL;
180 struct refill_engine *engine = NULL;
181 int ret;
182 unsigned long flags;
183
184
185 /* wait until an engine is available */
186 ret = wait_event_interruptible(omap_dmm->engine_queue,
187 atomic_add_unless(&omap_dmm->engine_counter, -1, 0));
188 if (ret)
189 return ERR_PTR(ret);
190
191 /* grab an idle engine */
192 spin_lock_irqsave(&list_lock, flags);
193 if (!list_empty(&dmm->idle_head)) {
194 engine = list_entry(dmm->idle_head.next, struct refill_engine,
195 idle_node);
196 list_del(&engine->idle_node);
197 }
198 spin_unlock_irqrestore(&list_lock, flags);
199
200 BUG_ON(!engine);
201
202 txn = &engine->txn;
203 engine->tcm = tcm;
204 txn->engine_handle = engine;
205 txn->last_pat = NULL;
206 txn->current_va = engine->refill_va;
207 txn->current_pa = engine->refill_pa;
208
209 return txn;
210}
211
212/**
213 * Add region to DMM transaction. If pages or pages[i] is NULL, then the
214 * corresponding slot is cleared (ie. dummy_pa is programmed)
215 */
216static void dmm_txn_append(struct dmm_txn *txn, struct pat_area *area,
217 struct page **pages, uint32_t npages, uint32_t roll)
218{
219 dma_addr_t pat_pa = 0, data_pa = 0;
220 uint32_t *data;
221 struct pat *pat;
222 struct refill_engine *engine = txn->engine_handle;
223 int columns = (1 + area->x1 - area->x0);
224 int rows = (1 + area->y1 - area->y0);
225 int i = columns*rows;
226
227 pat = alloc_dma(txn, sizeof(struct pat), &pat_pa);
228
229 if (txn->last_pat)
230 txn->last_pat->next_pa = (uint32_t)pat_pa;
231
232 pat->area = *area;
233
234 /* adjust Y coordinates based off of container parameters */
235 pat->area.y0 += engine->tcm->y_offset;
236 pat->area.y1 += engine->tcm->y_offset;
237
238 pat->ctrl = (struct pat_ctrl){
239 .start = 1,
240 .lut_id = engine->tcm->lut_id,
241 };
242
243 data = alloc_dma(txn, 4*i, &data_pa);
244 /* FIXME: what if data_pa is more than 32-bit ? */
245 pat->data_pa = data_pa;
246
247 while (i--) {
248 int n = i + roll;
249 if (n >= npages)
250 n -= npages;
251 data[i] = (pages && pages[n]) ?
252 page_to_phys(pages[n]) : engine->dmm->dummy_pa;
253 }
254
255 txn->last_pat = pat;
256
257 return;
258}
259
260/**
261 * Commit the DMM transaction.
262 */
263static int dmm_txn_commit(struct dmm_txn *txn, bool wait)
264{
265 int ret = 0;
266 struct refill_engine *engine = txn->engine_handle;
267 struct dmm *dmm = engine->dmm;
268
269 if (!txn->last_pat) {
270 dev_err(engine->dmm->dev, "need at least one txn\n");
271 ret = -EINVAL;
272 goto cleanup;
273 }
274
275 txn->last_pat->next_pa = 0;
276
277 /* write to PAT_DESCR to clear out any pending transaction */
278 dmm_write(dmm, 0x0, reg[PAT_DESCR][engine->id]);
279
280 /* wait for engine ready: */
281 ret = wait_status(engine, DMM_PATSTATUS_READY);
282 if (ret) {
283 ret = -EFAULT;
284 goto cleanup;
285 }
286
287 /* mark whether it is async to denote list management in IRQ handler */
288 engine->async = wait ? false : true;
289 reinit_completion(&engine->compl);
290 /* verify that the irq handler sees the 'async' and completion value */
291 smp_mb();
292
293 /* kick reload */
294 dmm_write(dmm, engine->refill_pa, reg[PAT_DESCR][engine->id]);
295
296 if (wait) {
297 if (!wait_for_completion_timeout(&engine->compl,
298 msecs_to_jiffies(100))) {
299 dev_err(dmm->dev, "timed out waiting for done\n");
300 ret = -ETIMEDOUT;
301 }
302 }
303
304cleanup:
305 /* only place engine back on list if we are done with it */
306 if (ret || wait)
307 release_engine(engine);
308
309 return ret;
310}
311
312/*
313 * DMM programming
314 */
315static int fill(struct tcm_area *area, struct page **pages,
316 uint32_t npages, uint32_t roll, bool wait)
317{
318 int ret = 0;
319 struct tcm_area slice, area_s;
320 struct dmm_txn *txn;
321
322 /*
323 * FIXME
324 *
325 * Asynchronous fill does not work reliably, as the driver does not
326 * handle errors in the async code paths. The fill operation may
327 * silently fail, leading to leaking DMM engines, which may eventually
328 * lead to deadlock if we run out of DMM engines.
329 *
330 * For now, always set 'wait' so that we only use sync fills. Async
331 * fills should be fixed, or alternatively we could decide to only
332 * support sync fills and so the whole async code path could be removed.
333 */
334
335 wait = true;
336
337 txn = dmm_txn_init(omap_dmm, area->tcm);
338 if (IS_ERR_OR_NULL(txn))
339 return -ENOMEM;
340
341 tcm_for_each_slice(slice, *area, area_s) {
342 struct pat_area p_area = {
343 .x0 = slice.p0.x, .y0 = slice.p0.y,
344 .x1 = slice.p1.x, .y1 = slice.p1.y,
345 };
346
347 dmm_txn_append(txn, &p_area, pages, npages, roll);
348
349 roll += tcm_sizeof(slice);
350 }
351
352 ret = dmm_txn_commit(txn, wait);
353
354 return ret;
355}
356
357/*
358 * Pin/unpin
359 */
360
361/* note: slots for which pages[i] == NULL are filled w/ dummy page
362 */
363int tiler_pin(struct tiler_block *block, struct page **pages,
364 uint32_t npages, uint32_t roll, bool wait)
365{
366 int ret;
367
368 ret = fill(&block->area, pages, npages, roll, wait);
369
370 if (ret)
371 tiler_unpin(block);
372
373 return ret;
374}
375
376int tiler_unpin(struct tiler_block *block)
377{
378 return fill(&block->area, NULL, 0, 0, false);
379}
380
381/*
382 * Reserve/release
383 */
384struct tiler_block *tiler_reserve_2d(enum tiler_fmt fmt, uint16_t w,
385 uint16_t h, uint16_t align)
386{
387 struct tiler_block *block = kzalloc(sizeof(*block), GFP_KERNEL);
388 u32 min_align = 128;
389 int ret;
390 unsigned long flags;
391 size_t slot_bytes;
392
393 BUG_ON(!validfmt(fmt));
394
395 /* convert width/height to slots */
396 w = DIV_ROUND_UP(w, geom[fmt].slot_w);
397 h = DIV_ROUND_UP(h, geom[fmt].slot_h);
398
399 /* convert alignment to slots */
400 slot_bytes = geom[fmt].slot_w * geom[fmt].cpp;
401 min_align = max(min_align, slot_bytes);
402 align = (align > min_align) ? ALIGN(align, min_align) : min_align;
403 align /= slot_bytes;
404
405 block->fmt = fmt;
406
407 ret = tcm_reserve_2d(containers[fmt], w, h, align, -1, slot_bytes,
408 &block->area);
409 if (ret) {
410 kfree(block);
411 return ERR_PTR(-ENOMEM);
412 }
413
414 /* add to allocation list */
415 spin_lock_irqsave(&list_lock, flags);
416 list_add(&block->alloc_node, &omap_dmm->alloc_head);
417 spin_unlock_irqrestore(&list_lock, flags);
418
419 return block;
420}
421
422struct tiler_block *tiler_reserve_1d(size_t size)
423{
424 struct tiler_block *block = kzalloc(sizeof(*block), GFP_KERNEL);
425 int num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
426 unsigned long flags;
427
428 if (!block)
429 return ERR_PTR(-ENOMEM);
430
431 block->fmt = TILFMT_PAGE;
432
433 if (tcm_reserve_1d(containers[TILFMT_PAGE], num_pages,
434 &block->area)) {
435 kfree(block);
436 return ERR_PTR(-ENOMEM);
437 }
438
439 spin_lock_irqsave(&list_lock, flags);
440 list_add(&block->alloc_node, &omap_dmm->alloc_head);
441 spin_unlock_irqrestore(&list_lock, flags);
442
443 return block;
444}
445
446/* note: if you have pin'd pages, you should have already unpin'd first! */
447int tiler_release(struct tiler_block *block)
448{
449 int ret = tcm_free(&block->area);
450 unsigned long flags;
451
452 if (block->area.tcm)
453 dev_err(omap_dmm->dev, "failed to release block\n");
454
455 spin_lock_irqsave(&list_lock, flags);
456 list_del(&block->alloc_node);
457 spin_unlock_irqrestore(&list_lock, flags);
458
459 kfree(block);
460 return ret;
461}
462
463/*
464 * Utils
465 */
466
467/* calculate the tiler space address of a pixel in a view orientation...
468 * below description copied from the display subsystem section of TRM:
469 *
470 * When the TILER is addressed, the bits:
471 * [28:27] = 0x0 for 8-bit tiled
472 * 0x1 for 16-bit tiled
473 * 0x2 for 32-bit tiled
474 * 0x3 for page mode
475 * [31:29] = 0x0 for 0-degree view
476 * 0x1 for 180-degree view + mirroring
477 * 0x2 for 0-degree view + mirroring
478 * 0x3 for 180-degree view
479 * 0x4 for 270-degree view + mirroring
480 * 0x5 for 270-degree view
481 * 0x6 for 90-degree view
482 * 0x7 for 90-degree view + mirroring
483 * Otherwise the bits indicated the corresponding bit address to access
484 * the SDRAM.
485 */
486static u32 tiler_get_address(enum tiler_fmt fmt, u32 orient, u32 x, u32 y)
487{
488 u32 x_bits, y_bits, tmp, x_mask, y_mask, alignment;
489
490 x_bits = CONT_WIDTH_BITS - geom[fmt].x_shft;
491 y_bits = CONT_HEIGHT_BITS - geom[fmt].y_shft;
492 alignment = geom[fmt].x_shft + geom[fmt].y_shft;
493
494 /* validate coordinate */
495 x_mask = MASK(x_bits);
496 y_mask = MASK(y_bits);
497
498 if (x < 0 || x > x_mask || y < 0 || y > y_mask) {
499 DBG("invalid coords: %u < 0 || %u > %u || %u < 0 || %u > %u",
500 x, x, x_mask, y, y, y_mask);
501 return 0;
502 }
503
504 /* account for mirroring */
505 if (orient & MASK_X_INVERT)
506 x ^= x_mask;
507 if (orient & MASK_Y_INVERT)
508 y ^= y_mask;
509
510 /* get coordinate address */
511 if (orient & MASK_XY_FLIP)
512 tmp = ((x << y_bits) + y);
513 else
514 tmp = ((y << x_bits) + x);
515
516 return TIL_ADDR((tmp << alignment), orient, fmt);
517}
518
519dma_addr_t tiler_ssptr(struct tiler_block *block)
520{
521 BUG_ON(!validfmt(block->fmt));
522
523 return TILVIEW_8BIT + tiler_get_address(block->fmt, 0,
524 block->area.p0.x * geom[block->fmt].slot_w,
525 block->area.p0.y * geom[block->fmt].slot_h);
526}
527
528dma_addr_t tiler_tsptr(struct tiler_block *block, uint32_t orient,
529 uint32_t x, uint32_t y)
530{
531 struct tcm_pt *p = &block->area.p0;
532 BUG_ON(!validfmt(block->fmt));
533
534 return tiler_get_address(block->fmt, orient,
535 (p->x * geom[block->fmt].slot_w) + x,
536 (p->y * geom[block->fmt].slot_h) + y);
537}
538
539void tiler_align(enum tiler_fmt fmt, uint16_t *w, uint16_t *h)
540{
541 BUG_ON(!validfmt(fmt));
542 *w = round_up(*w, geom[fmt].slot_w);
543 *h = round_up(*h, geom[fmt].slot_h);
544}
545
546uint32_t tiler_stride(enum tiler_fmt fmt, uint32_t orient)
547{
548 BUG_ON(!validfmt(fmt));
549
550 if (orient & MASK_XY_FLIP)
551 return 1 << (CONT_HEIGHT_BITS + geom[fmt].x_shft);
552 else
553 return 1 << (CONT_WIDTH_BITS + geom[fmt].y_shft);
554}
555
556size_t tiler_size(enum tiler_fmt fmt, uint16_t w, uint16_t h)
557{
558 tiler_align(fmt, &w, &h);
559 return geom[fmt].cpp * w * h;
560}
561
562size_t tiler_vsize(enum tiler_fmt fmt, uint16_t w, uint16_t h)
563{
564 BUG_ON(!validfmt(fmt));
565 return round_up(geom[fmt].cpp * w, PAGE_SIZE) * h;
566}
567
568uint32_t tiler_get_cpu_cache_flags(void)
569{
570 return omap_dmm->plat_data->cpu_cache_flags;
571}
572
573bool dmm_is_available(void)
574{
575 return omap_dmm ? true : false;
576}
577
578static int omap_dmm_remove(struct platform_device *dev)
579{
580 struct tiler_block *block, *_block;
581 int i;
582 unsigned long flags;
583
584 if (omap_dmm) {
585 /* free all area regions */
586 spin_lock_irqsave(&list_lock, flags);
587 list_for_each_entry_safe(block, _block, &omap_dmm->alloc_head,
588 alloc_node) {
589 list_del(&block->alloc_node);
590 kfree(block);
591 }
592 spin_unlock_irqrestore(&list_lock, flags);
593
594 for (i = 0; i < omap_dmm->num_lut; i++)
595 if (omap_dmm->tcm && omap_dmm->tcm[i])
596 omap_dmm->tcm[i]->deinit(omap_dmm->tcm[i]);
597 kfree(omap_dmm->tcm);
598
599 kfree(omap_dmm->engines);
600 if (omap_dmm->refill_va)
601 dma_free_wc(omap_dmm->dev,
602 REFILL_BUFFER_SIZE * omap_dmm->num_engines,
603 omap_dmm->refill_va, omap_dmm->refill_pa);
604 if (omap_dmm->dummy_page)
605 __free_page(omap_dmm->dummy_page);
606
607 if (omap_dmm->irq > 0)
608 free_irq(omap_dmm->irq, omap_dmm);
609
610 iounmap(omap_dmm->base);
611 kfree(omap_dmm);
612 omap_dmm = NULL;
613 }
614
615 return 0;
616}
617
618static int omap_dmm_probe(struct platform_device *dev)
619{
620 int ret = -EFAULT, i;
621 struct tcm_area area = {0};
622 u32 hwinfo, pat_geom;
623 struct resource *mem;
624
625 omap_dmm = kzalloc(sizeof(*omap_dmm), GFP_KERNEL);
626 if (!omap_dmm)
627 goto fail;
628
629 /* initialize lists */
630 INIT_LIST_HEAD(&omap_dmm->alloc_head);
631 INIT_LIST_HEAD(&omap_dmm->idle_head);
632
633 init_waitqueue_head(&omap_dmm->engine_queue);
634
635 if (dev->dev.of_node) {
636 const struct of_device_id *match;
637
638 match = of_match_node(dmm_of_match, dev->dev.of_node);
639 if (!match) {
640 dev_err(&dev->dev, "failed to find matching device node\n");
641 return -ENODEV;
642 }
643
644 omap_dmm->plat_data = match->data;
645 }
646
647 /* lookup hwmod data - base address and irq */
648 mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
649 if (!mem) {
650 dev_err(&dev->dev, "failed to get base address resource\n");
651 goto fail;
652 }
653
654 omap_dmm->base = ioremap(mem->start, SZ_2K);
655
656 if (!omap_dmm->base) {
657 dev_err(&dev->dev, "failed to get dmm base address\n");
658 goto fail;
659 }
660
661 omap_dmm->irq = platform_get_irq(dev, 0);
662 if (omap_dmm->irq < 0) {
663 dev_err(&dev->dev, "failed to get IRQ resource\n");
664 goto fail;
665 }
666
667 omap_dmm->dev = &dev->dev;
668
669 hwinfo = dmm_read(omap_dmm, DMM_PAT_HWINFO);
670 omap_dmm->num_engines = (hwinfo >> 24) & 0x1F;
671 omap_dmm->num_lut = (hwinfo >> 16) & 0x1F;
672 omap_dmm->container_width = 256;
673 omap_dmm->container_height = 128;
674
675 atomic_set(&omap_dmm->engine_counter, omap_dmm->num_engines);
676
677 /* read out actual LUT width and height */
678 pat_geom = dmm_read(omap_dmm, DMM_PAT_GEOMETRY);
679 omap_dmm->lut_width = ((pat_geom >> 16) & 0xF) << 5;
680 omap_dmm->lut_height = ((pat_geom >> 24) & 0xF) << 5;
681
682 /* increment LUT by one if on OMAP5 */
683 /* LUT has twice the height, and is split into a separate container */
684 if (omap_dmm->lut_height != omap_dmm->container_height)
685 omap_dmm->num_lut++;
686
687 /* initialize DMM registers */
688 dmm_write(omap_dmm, 0x88888888, DMM_PAT_VIEW__0);
689 dmm_write(omap_dmm, 0x88888888, DMM_PAT_VIEW__1);
690 dmm_write(omap_dmm, 0x80808080, DMM_PAT_VIEW_MAP__0);
691 dmm_write(omap_dmm, 0x80000000, DMM_PAT_VIEW_MAP_BASE);
692 dmm_write(omap_dmm, 0x88888888, DMM_TILER_OR__0);
693 dmm_write(omap_dmm, 0x88888888, DMM_TILER_OR__1);
694
695 ret = request_irq(omap_dmm->irq, omap_dmm_irq_handler, IRQF_SHARED,
696 "omap_dmm_irq_handler", omap_dmm);
697
698 if (ret) {
699 dev_err(&dev->dev, "couldn't register IRQ %d, error %d\n",
700 omap_dmm->irq, ret);
701 omap_dmm->irq = -1;
702 goto fail;
703 }
704
705 /* Enable all interrupts for each refill engine except
706 * ERR_LUT_MISS<n> (which is just advisory, and we don't care
707 * about because we want to be able to refill live scanout
708 * buffers for accelerated pan/scroll) and FILL_DSC<n> which
709 * we just generally don't care about.
710 */
711 dmm_write(omap_dmm, 0x7e7e7e7e, DMM_PAT_IRQENABLE_SET);
712
713 omap_dmm->dummy_page = alloc_page(GFP_KERNEL | __GFP_DMA32);
714 if (!omap_dmm->dummy_page) {
715 dev_err(&dev->dev, "could not allocate dummy page\n");
716 ret = -ENOMEM;
717 goto fail;
718 }
719
720 /* set dma mask for device */
721 ret = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
722 if (ret)
723 goto fail;
724
725 omap_dmm->dummy_pa = page_to_phys(omap_dmm->dummy_page);
726
727 /* alloc refill memory */
728 omap_dmm->refill_va = dma_alloc_wc(&dev->dev,
729 REFILL_BUFFER_SIZE * omap_dmm->num_engines,
730 &omap_dmm->refill_pa, GFP_KERNEL);
731 if (!omap_dmm->refill_va) {
732 dev_err(&dev->dev, "could not allocate refill memory\n");
733 goto fail;
734 }
735
736 /* alloc engines */
737 omap_dmm->engines = kcalloc(omap_dmm->num_engines,
738 sizeof(struct refill_engine), GFP_KERNEL);
739 if (!omap_dmm->engines) {
740 ret = -ENOMEM;
741 goto fail;
742 }
743
744 for (i = 0; i < omap_dmm->num_engines; i++) {
745 omap_dmm->engines[i].id = i;
746 omap_dmm->engines[i].dmm = omap_dmm;
747 omap_dmm->engines[i].refill_va = omap_dmm->refill_va +
748 (REFILL_BUFFER_SIZE * i);
749 omap_dmm->engines[i].refill_pa = omap_dmm->refill_pa +
750 (REFILL_BUFFER_SIZE * i);
751 init_completion(&omap_dmm->engines[i].compl);
752
753 list_add(&omap_dmm->engines[i].idle_node, &omap_dmm->idle_head);
754 }
755
756 omap_dmm->tcm = kcalloc(omap_dmm->num_lut, sizeof(*omap_dmm->tcm),
757 GFP_KERNEL);
758 if (!omap_dmm->tcm) {
759 ret = -ENOMEM;
760 goto fail;
761 }
762
763 /* init containers */
764 /* Each LUT is associated with a TCM (container manager). We use the
765 lut_id to denote the lut_id used to identify the correct LUT for
766 programming during reill operations */
767 for (i = 0; i < omap_dmm->num_lut; i++) {
768 omap_dmm->tcm[i] = sita_init(omap_dmm->container_width,
769 omap_dmm->container_height);
770
771 if (!omap_dmm->tcm[i]) {
772 dev_err(&dev->dev, "failed to allocate container\n");
773 ret = -ENOMEM;
774 goto fail;
775 }
776
777 omap_dmm->tcm[i]->lut_id = i;
778 }
779
780 /* assign access mode containers to applicable tcm container */
781 /* OMAP 4 has 1 container for all 4 views */
782 /* OMAP 5 has 2 containers, 1 for 2D and 1 for 1D */
783 containers[TILFMT_8BIT] = omap_dmm->tcm[0];
784 containers[TILFMT_16BIT] = omap_dmm->tcm[0];
785 containers[TILFMT_32BIT] = omap_dmm->tcm[0];
786
787 if (omap_dmm->container_height != omap_dmm->lut_height) {
788 /* second LUT is used for PAGE mode. Programming must use
789 y offset that is added to all y coordinates. LUT id is still
790 0, because it is the same LUT, just the upper 128 lines */
791 containers[TILFMT_PAGE] = omap_dmm->tcm[1];
792 omap_dmm->tcm[1]->y_offset = OMAP5_LUT_OFFSET;
793 omap_dmm->tcm[1]->lut_id = 0;
794 } else {
795 containers[TILFMT_PAGE] = omap_dmm->tcm[0];
796 }
797
798 area = (struct tcm_area) {
799 .tcm = NULL,
800 .p1.x = omap_dmm->container_width - 1,
801 .p1.y = omap_dmm->container_height - 1,
802 };
803
804 /* initialize all LUTs to dummy page entries */
805 for (i = 0; i < omap_dmm->num_lut; i++) {
806 area.tcm = omap_dmm->tcm[i];
807 if (fill(&area, NULL, 0, 0, true))
808 dev_err(omap_dmm->dev, "refill failed");
809 }
810
811 dev_info(omap_dmm->dev, "initialized all PAT entries\n");
812
813 return 0;
814
815fail:
816 if (omap_dmm_remove(dev))
817 dev_err(&dev->dev, "cleanup failed\n");
818 return ret;
819}
820
821/*
822 * debugfs support
823 */
824
825#ifdef CONFIG_DEBUG_FS
826
827static const char *alphabet = "abcdefghijklmnopqrstuvwxyz"
828 "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789";
829static const char *special = ".,:;'\"`~!^-+";
830
831static void fill_map(char **map, int xdiv, int ydiv, struct tcm_area *a,
832 char c, bool ovw)
833{
834 int x, y;
835 for (y = a->p0.y / ydiv; y <= a->p1.y / ydiv; y++)
836 for (x = a->p0.x / xdiv; x <= a->p1.x / xdiv; x++)
837 if (map[y][x] == ' ' || ovw)
838 map[y][x] = c;
839}
840
841static void fill_map_pt(char **map, int xdiv, int ydiv, struct tcm_pt *p,
842 char c)
843{
844 map[p->y / ydiv][p->x / xdiv] = c;
845}
846
847static char read_map_pt(char **map, int xdiv, int ydiv, struct tcm_pt *p)
848{
849 return map[p->y / ydiv][p->x / xdiv];
850}
851
852static int map_width(int xdiv, int x0, int x1)
853{
854 return (x1 / xdiv) - (x0 / xdiv) + 1;
855}
856
857static void text_map(char **map, int xdiv, char *nice, int yd, int x0, int x1)
858{
859 char *p = map[yd] + (x0 / xdiv);
860 int w = (map_width(xdiv, x0, x1) - strlen(nice)) / 2;
861 if (w >= 0) {
862 p += w;
863 while (*nice)
864 *p++ = *nice++;
865 }
866}
867
868static void map_1d_info(char **map, int xdiv, int ydiv, char *nice,
869 struct tcm_area *a)
870{
871 sprintf(nice, "%dK", tcm_sizeof(*a) * 4);
872 if (a->p0.y + 1 < a->p1.y) {
873 text_map(map, xdiv, nice, (a->p0.y + a->p1.y) / 2 / ydiv, 0,
874 256 - 1);
875 } else if (a->p0.y < a->p1.y) {
876 if (strlen(nice) < map_width(xdiv, a->p0.x, 256 - 1))
877 text_map(map, xdiv, nice, a->p0.y / ydiv,
878 a->p0.x + xdiv, 256 - 1);
879 else if (strlen(nice) < map_width(xdiv, 0, a->p1.x))
880 text_map(map, xdiv, nice, a->p1.y / ydiv,
881 0, a->p1.y - xdiv);
882 } else if (strlen(nice) + 1 < map_width(xdiv, a->p0.x, a->p1.x)) {
883 text_map(map, xdiv, nice, a->p0.y / ydiv, a->p0.x, a->p1.x);
884 }
885}
886
887static void map_2d_info(char **map, int xdiv, int ydiv, char *nice,
888 struct tcm_area *a)
889{
890 sprintf(nice, "(%d*%d)", tcm_awidth(*a), tcm_aheight(*a));
891 if (strlen(nice) + 1 < map_width(xdiv, a->p0.x, a->p1.x))
892 text_map(map, xdiv, nice, (a->p0.y + a->p1.y) / 2 / ydiv,
893 a->p0.x, a->p1.x);
894}
895
896int tiler_map_show(struct seq_file *s, void *arg)
897{
898 int xdiv = 2, ydiv = 1;
899 char **map = NULL, *global_map;
900 struct tiler_block *block;
901 struct tcm_area a, p;
902 int i;
903 const char *m2d = alphabet;
904 const char *a2d = special;
905 const char *m2dp = m2d, *a2dp = a2d;
906 char nice[128];
907 int h_adj;
908 int w_adj;
909 unsigned long flags;
910 int lut_idx;
911
912
913 if (!omap_dmm) {
914 /* early return if dmm/tiler device is not initialized */
915 return 0;
916 }
917
918 h_adj = omap_dmm->container_height / ydiv;
919 w_adj = omap_dmm->container_width / xdiv;
920
921 map = kmalloc(h_adj * sizeof(*map), GFP_KERNEL);
922 global_map = kmalloc((w_adj + 1) * h_adj, GFP_KERNEL);
923
924 if (!map || !global_map)
925 goto error;
926
927 for (lut_idx = 0; lut_idx < omap_dmm->num_lut; lut_idx++) {
928 memset(map, 0, h_adj * sizeof(*map));
929 memset(global_map, ' ', (w_adj + 1) * h_adj);
930
931 for (i = 0; i < omap_dmm->container_height; i++) {
932 map[i] = global_map + i * (w_adj + 1);
933 map[i][w_adj] = 0;
934 }
935
936 spin_lock_irqsave(&list_lock, flags);
937
938 list_for_each_entry(block, &omap_dmm->alloc_head, alloc_node) {
939 if (block->area.tcm == omap_dmm->tcm[lut_idx]) {
940 if (block->fmt != TILFMT_PAGE) {
941 fill_map(map, xdiv, ydiv, &block->area,
942 *m2dp, true);
943 if (!*++a2dp)
944 a2dp = a2d;
945 if (!*++m2dp)
946 m2dp = m2d;
947 map_2d_info(map, xdiv, ydiv, nice,
948 &block->area);
949 } else {
950 bool start = read_map_pt(map, xdiv,
951 ydiv, &block->area.p0) == ' ';
952 bool end = read_map_pt(map, xdiv, ydiv,
953 &block->area.p1) == ' ';
954
955 tcm_for_each_slice(a, block->area, p)
956 fill_map(map, xdiv, ydiv, &a,
957 '=', true);
958 fill_map_pt(map, xdiv, ydiv,
959 &block->area.p0,
960 start ? '<' : 'X');
961 fill_map_pt(map, xdiv, ydiv,
962 &block->area.p1,
963 end ? '>' : 'X');
964 map_1d_info(map, xdiv, ydiv, nice,
965 &block->area);
966 }
967 }
968 }
969
970 spin_unlock_irqrestore(&list_lock, flags);
971
972 if (s) {
973 seq_printf(s, "CONTAINER %d DUMP BEGIN\n", lut_idx);
974 for (i = 0; i < 128; i++)
975 seq_printf(s, "%03d:%s\n", i, map[i]);
976 seq_printf(s, "CONTAINER %d DUMP END\n", lut_idx);
977 } else {
978 dev_dbg(omap_dmm->dev, "CONTAINER %d DUMP BEGIN\n",
979 lut_idx);
980 for (i = 0; i < 128; i++)
981 dev_dbg(omap_dmm->dev, "%03d:%s\n", i, map[i]);
982 dev_dbg(omap_dmm->dev, "CONTAINER %d DUMP END\n",
983 lut_idx);
984 }
985 }
986
987error:
988 kfree(map);
989 kfree(global_map);
990
991 return 0;
992}
993#endif
994
995#ifdef CONFIG_PM_SLEEP
996static int omap_dmm_resume(struct device *dev)
997{
998 struct tcm_area area;
999 int i;
1000
1001 if (!omap_dmm)
1002 return -ENODEV;
1003
1004 area = (struct tcm_area) {
1005 .tcm = NULL,
1006 .p1.x = omap_dmm->container_width - 1,
1007 .p1.y = omap_dmm->container_height - 1,
1008 };
1009
1010 /* initialize all LUTs to dummy page entries */
1011 for (i = 0; i < omap_dmm->num_lut; i++) {
1012 area.tcm = omap_dmm->tcm[i];
1013 if (fill(&area, NULL, 0, 0, true))
1014 dev_err(dev, "refill failed");
1015 }
1016
1017 return 0;
1018}
1019#endif
1020
1021static SIMPLE_DEV_PM_OPS(omap_dmm_pm_ops, NULL, omap_dmm_resume);
1022
1023#if defined(CONFIG_OF)
1024static const struct dmm_platform_data dmm_omap4_platform_data = {
1025 .cpu_cache_flags = OMAP_BO_WC,
1026};
1027
1028static const struct dmm_platform_data dmm_omap5_platform_data = {
1029 .cpu_cache_flags = OMAP_BO_UNCACHED,
1030};
1031
1032static const struct of_device_id dmm_of_match[] = {
1033 {
1034 .compatible = "ti,omap4-dmm",
1035 .data = &dmm_omap4_platform_data,
1036 },
1037 {
1038 .compatible = "ti,omap5-dmm",
1039 .data = &dmm_omap5_platform_data,
1040 },
1041 {},
1042};
1043#endif
1044
1045struct platform_driver omap_dmm_driver = {
1046 .probe = omap_dmm_probe,
1047 .remove = omap_dmm_remove,
1048 .driver = {
1049 .owner = THIS_MODULE,
1050 .name = DMM_DRIVER_NAME,
1051 .of_match_table = of_match_ptr(dmm_of_match),
1052 .pm = &omap_dmm_pm_ops,
1053 },
1054};
1055
1056MODULE_LICENSE("GPL v2");
1057MODULE_AUTHOR("Andy Gross <andy.gross@ti.com>");
1058MODULE_DESCRIPTION("OMAP DMM/Tiler Driver");